Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Article

Abbas, Z. and Mehdi, I. and Hasnain, J. and Alzahrani, Abdullah K. and Asma, Mir (2023) Homogeneous-heterogeneous reactions in MHD mixed convection fluid flow between concentric cylinders with heat generation and heat absorption. Case Studies in Thermal Engineering, 42. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2023.102718.

Abd Rahman, Farah Hannani and Amiruddin, Hilmi and Abdollah, Mohd Fadzli and Zulkifli, Nurin Wahidah Mohd and Samion, Syahrullail and Umehara, Nortisugu and Tanemura, Masaki and Honda, Mitsuhiro and Morina, Ardian (2024) Synthesising graphene with renewably-sourced bio-carbon precursors: a brief review. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46 (3). p. 173. ISSN 1678-5878, DOI https://doi.org/10.1007/s40430-024-04743-y.

Abd Rahman, Nurul Izzah and Md Dawal, Siti Zawiah and Yusoff, Nukman and Mohd Kamil, Nabilla Sofia (2018) Anthropometric measurements among four Asian countries in designing sitting and standing workstations. Sadhana, 43 (1). p. 10. ISSN 0256-2499, DOI https://doi.org/10.1007/s12046-017-0768-8.

AbdRabbuh, O. Almatar and Abdelrazek, Ali H. and Kazi, Salim Newaz and Zubir, Mohd Nashrul Mohd (2022) Nanofluids thermal performance in the horizontal annular passages: A recent comprehensive review. Journal of Thermal Analysis and Calorimetry, 147 (21). pp. 11633-11660. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-022-11389-2.

AbdRabbuh, O. Almatar and Kazi, S.N. and Zubir, Mohd Nashrul Mohd and Chowdhury, Zaira Zaman and Abdelrazek, Ali H. (2024) Heat transfer inside annular passages: A comparison of noncircular and fully circular passages using eco-friendly graphene nanofluid. Case Studies in Thermal Engineering, 60. p. 104659. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2024.104659.

Abdalrahman, Ghada and Lai, Sai Hin and Kumar, Pavitra and Ahmed, Ali Najah and Sherif, Mohsen and Sefelnasr, Ahmed and Chau, Kwok Wing and Elshafie, Ahmed (2022) Modeling the infiltration rate of wastewater infiltration basins considering water quality parameters using different artificial neural network techniques. Engineering Applications of Computational Fluid Mechanics, 16 (1). pp. 397-421. ISSN 1994-2060, DOI https://doi.org/10.1080/19942060.2021.2019126.

Abdelrazek, Ali H. and Alawi, Omer A. and Kazi, Salim Newaz and Yusoff, Nukman (2021) Thermal performance evaluation for alumina coated MWCNTs composite nanofluid in annular passage of various eccentricities. Powder Technology, 391. pp. 114-132. ISSN 0032-5910, DOI https://doi.org/10.1016/j.powtec.2021.06.005.

Abdelrazek, Ali H. and Alawi, Omer A. and Kazi, Salim Newaz and Yusoff, Nukman and Chowdhury, Zaira Zaman and Sarhan, Ahmed Aly Diaa Mohammed (2018) A new approach to evaluate the impact of thermophysical properties of nanofluids on heat transfer and pressure drop. International Communications in Heat and Mass Transfer, 95. pp. 161-170. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2018.05.002.

Abdelrazek, Ali H. and Alawi, Omer A. and Mat Ali, Mohamed Sukri and Zaki, Sheikh Ahmad and Ahmed, Khaled I. and Kazi, S. N. (2024) Thermal performance assessment of alumina/graphene oxide hybrid nanofluid in annular passage of multiple configurations. Journal of Thermal Analysis and Calorimetry, 149 (5). pp. 2463-2479. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-023-12821-x.

Abdesselam, H. and Masjuki, Haji Hassan and Saidur, Rahman and Sattar, M.A. and Guellal, M. (2008) Performance study of water-to-water heat pump using non-azeotropic refrigerant mixtures R407C. International Energy Journal, 9 (4).

Abdollahi, Y. and Zakaria, A. and Said, S.M. and Sabri, M.F.M. and Sairi, N.A. and Rezayi, M. and Abouzari-lotf, E. and Dorraj, M. and Islam, A. (2015) Modeling of photodegradation process to remove the higher concentration of environmental pollution. Desalination and Water Treatment, 57 (1). pp. 191-201. ISSN 1944-3994, DOI https://doi.org/10.1080/19443994.2015.1043497.

Abdolvand, H. and Sohrabi, H. and Faraji, G. and Yusof, F. (2015) A novel combined severe plastic deformation method for producing thin-walled ultrafine grained cylindrical tubes. Materials Letters, 143. pp. 167-171. ISSN 0167-577X, DOI https://doi.org/10.1016/j.matlet.2014.12.107.

Abdul Hakim, S.R. (2012) Laminar mixed convection in inclined triangular enclosures filled with water based cu nanofluid. Industrial and Engineering Chemistry Research, 51 (10). pp. 4090-4100. ISSN 0888-5885, DOI https://doi.org/10.1021/ie201235p.

Abdullah, M.A. and Yatim, A.H.M. and Tan, C.W.A. and Saidur, Rahman (2012) A review of maximum power point tracking algorithms for wind energy systems. Renewable and Sustainable Energy Reviews, 16 (5). pp. 3220-3227. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.02.016.

Abdullah, Muhammad Faiq and Andriyana, Andri and Muhamad, Farina and Ang, Bee Chin (2021) Effect of core-to-shell flowrate ratio on morphology, crystallinity, mechanical properties and wettability of poly(lactic acid) fibers prepared via modified coaxial electrospinning. Polymer, 237. p. 124378. ISSN 0032-3861, DOI https://doi.org/10.1016/j.polymer.2021.124378.

Abdullah, Norbani and Elsheikh, Mohamed Hamid and Ibrahim, Nik Muhd Jazli Nik and Said, Suhana Mohd and Sabri, Mohd Faizul Mohd and Masjuki, Haji Hassan and Marlina, Anita (2015) Magnetic, thermal, mesomorphic and thermoelectric properties of mononuclear, dimeric and polymeric iron(II) complexes with conjugated ligands. RSC Advances, 5 (63). pp. 50999-51007. ISSN 2046-2069, DOI https://doi.org/10.1039/c5ra07100c.

Abdullah, Shekh and Mohd Zubir, Mohd Nashrul Mohd and Muhamad, Mohd Ridha and Newaz, Kazi Md Salim and Oztop, Hakan F. and Alam, Md Shadab and Shaikh, Kaleemullah (2023) Technological development of evaporative cooling systems and its integration with air dehumidification processes: A review. Energy and Buildings, 283. ISSN 0378-7788, DOI https://doi.org/10.1016/j.enbuild.2023.112805.

Abdullahi, A.A. and Choudhury, I.A. and Azuddin, M. (2016) Effect of runner dimensions on cavity filling in microinjection moulding for defect-free parts. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7788-7793. ISSN 1819-6608,

Abdulrazzaq, Tuqa and Togun, Hussein and Reza Safaei, Mohammad and Kazi, Salim Newaz and Mohd Ariffin, Mohd Khairol Anuar and Adam, Nor Mariah (2020) Effect of flow separation of TiO2 nanofluid on heat transfer in the annular space of two concentric cylinders. Thermal Science, 24 (2, A). pp. 1007-1018. ISSN 0354-9836, DOI https://doi.org/10.2298/TSCI180709321A.

Abed, Fayadh Mohamed and Farhan, Israa Sami and Yassen, Tadahmun Ahmed and Hasanuzzaman, Md. and Islam, Mohammed Moinul and Kassim, Muna Sabah (2024) Modelling and performance investigation of a solar chimney power plant with glass-covered solar collector. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 46 (1). pp. 5201-5218. ISSN 1556-7036, DOI https://doi.org/10.1080/15567036.2024.2326661.

Abedin, M.J. and Kalam, M.A. and Masjuki, Haji Hassan and Sabri, M.F.M. and Rahman, S.M.A. and Sanjid, A. and Fattah, I.M.R. (2016) Production of biodiesel from a non-edible source and study of its combustion, and emission characteristics: A comparative study with B5. Renewable Energy, 88. pp. 20-29. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2015.11.027.

Abedin, M.J. and Masjuki, Haji Hassan and Kalam, M.A. and Varman, Mahendra and Arbab, M.I. and Rizwanul Fattah, I.M. and Masum, B.M. (2014) Experimental investigation of a multicylinder unmodified diesel engine performance, emission, and heat loss characteristics using different biodiesel blends: Rollout of B10 in Malaysia. Scientific World Journal, 2014. p. 349858. ISSN 2356-6140, DOI https://doi.org/10.1155/2014/349858.

Abidi, Awatef and Ahmadi, Amir and Enayati, Mojtaba and Sajadi, S. Mohammad and Yarmand, Hooman and Ahmed, Arslan and Cheraghian, Goshtasp (2021) A review of the methods of modeling multi-phase flows within different microchannels shapes and their applications. Micromachines, 12 (9). ISSN 2072-666X, DOI https://doi.org/10.3390/mi12091113.

Abidin, N.I.Z. and Da Forno, A. and Bestetti, M. and Martin, D. and Beer, A. and Atrens, A. (2015) Evaluation of coatings for Mg alloys for biomedical applications. Advanced Engineering Materials, 17 (1). pp. 58-67. ISSN 1438-1656, DOI https://doi.org/10.1002/adem.201300516.

Abidou, Diaa and Sarhan, Ahmed Aly Diaa Mohammed and Yusoff, Nukman and Nik-Ghazali, Nik Nazri and Awang, Md Abu Omar and Hassan, Mohsen A. (2018) Numerical simulation of metal removal in laser drilling using meshless local Petrov–Galerkin collocation method. Applied Mathematical Modelling, 56. pp. 239-253. ISSN 0307-904X, DOI https://doi.org/10.1016/j.apm.2017.08.032.

Abu Bakar, Nurfatimah and Ching, Yern Chee and Abdullah, Luqman Chuah and Ratnam, Chantara Thevy and Ibrahim, Nor Azowa (2015) Thermal and dynamic mechanical properties of grafted kenaf filled poly (vinyl chloride)/ethylene vinyl acetate composites. Materials & Design, 65. pp. 204-211. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2014.09.027.

Abu Hussein, Nurul Athirah and Ang, Bee Chin and Wong, Yew Hoong and Ong, Boon Hoong and Baharuddin, Aainaa Aqilah (2018) Synthesis and characterization of γ-Fe2O3 NPs on silicon substrate for power device application. Materials Research Express, 5 (6). 065020. ISSN 2053-1591, DOI https://doi.org/10.1088/2053-1591/aac674.

Abu Rmilah, M.H.Y. and Hassan, M.A. and Mardi, N.A. (2016) A PC-based simulation platform for a quadcopter system with self-tuning fuzzy PID controllers. Computer Applications in Engineering Education, 24 (6). pp. 934-950. ISSN 1061-3773, DOI https://doi.org/10.1002/cae.21769.

Abubakar, A. and Mantoro, T. and Moedjiono, S. and Ayu, M.A. and Chiroma, H. and Waqas, A. and Abdulhamid, S.M. and Hamza, M.F. and Gital, A.Y. (2016) A Support Vector Machine Classification of Computational Capabilities of 3D Map on Mobile Device for Navigation Aid. International Journal of Interactive Mobile Technologies (iJIM), 10 (3). pp. 4-10. ISSN 1865-7923, DOI https://doi.org/10.3991/ijim.v10i3.5056.

Abutu, J. and Lawal, Sunday Albert and Ndaliman, Mohammed Baba and Lafia-Araga, Ruth Anayimi and Adedipe, Oyewole and Choudhury, Imtiaz Ahmed (2018) Effects of process parameters on the properties of brake pad developed from seashell as reinforcement material using grey relational analysis. Enegineering Science and Technology-An International Journal-JESTECH, 21 (4). pp. 787-797. ISSN 2215-0986, DOI https://doi.org/10.1016/j.jestch.2018.05.014.

Adebayo, Ganiyat Olusola and Hassan, Aziz and Yahya, Rosiyah and Muhamad Sarih, Norazilawati and Odesanya, Kazeem Olabisi (2021) Impact of water saturation on the tensile and thermal properties of heat-treated mangrove/high-density polyethylene composites. Journal of Thermoplastic Composite Materials, 34 (4). pp. 508-522. ISSN 0892-7057, DOI https://doi.org/10.1177/0892705719847238.

Adeleke, Sakiru Adekunle (2022) The effects of different bioceramics-incorporated oxide films on titanium implant by plasma electrolytic oxidation. JOURNAL OF MATERIALS RESEARCH, 37 (23). pp. 4348-4359. ISSN 2044-5326, DOI https://doi.org/10.1557/s43578-022-00804-x.

Adeleke, Sakiru Adekunle and Bushroa, Abdul Razak and Herliansyah, Muhammad Kusumawan and Sopyan, Iis and Basirun, Wan Jefrey and Ladan, Magaji (2018) Preparation, scratch adhesion and anti-corrosion performance of TiO2-MgO-BHA coating on Ti6Al4V implant by plasma electrolytic oxidation technique. Journal of Adhesion Science and Technology, 32 (1). pp. 91-102. ISSN 0169-4243, DOI https://doi.org/10.1080/01694243.2017.1341772.

Adeleke, Sakiru Adekunle and Ramesh, Singh and Bushroa, Abdul Razak and Ching, Yern Chee and Sopyan, Iis and Maleque, Md Abdul and Krishnasamy, Sivakumar and Chandran, Hari and Misran, Halina and Sutharsini, Ubenthiran (2018) The properties of hydroxyapatite ceramic coatings produced by plasma electrolytic oxidation. Ceramics International, 44 (2). pp. 1802-1811. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2017.10.114.

Adnan, Nursyahirah and Md Dawal, Siti Zawiah (2019) Applied anthropometric for wheelchair user in Malaysia. Measurement, 136. pp. 786-794. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2018.11.002.

Adnan, R. and Sabri Adlan, Z. and Munir, Fudhail Abdul and Mahlia, Teuku Meurah Indra and Masjuki, Haji Hassan (2018) Effects of equivalence ratio on performance and emissions of diesel engine with hydrogen and water injection system at variable injection timing. International Journal of Mechanical and Mechatronics Engineering, 18 (1). pp. 106-111. ISSN 2227-2771,

Adzila, S. and Ramesh, S. and Sopyan, I. (2016) Properties of magnesium doped nanocrystalline hydroxyapatite synthesize by mechanochemical method. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14097-14100. ISSN 1819-6608,

Aeinehvand, Mohammad Mahdi and Weber, Laura and Jiménez, Martín and Palermo, Andrea and Bauer, Maria and Loeffler, Felix F. and Ibrahim, Fatimah and Breitling, Frank and Korvink, Jan and Madou, Marc and Mager, Dario and Martínez-Chapa, Sergio O. (2019) Elastic reversible valves on centrifugal microfluidic platforms. Lab on a Chip, 19 (6). pp. 1090-1100. ISSN 1473-0197, DOI https://doi.org/10.1039/C8LC00849C.

Afan, Haitham Abdulmohsin and Osman, Ahmedbahaaaldin Ibrahem Ahmed and Essam, Yusuf and Ahmed, Ali Najah and Huang, Yuk Feng and Kisi, Ozgur and Sherif, Mohsen and Sefelnasr, Ahmed and Chau, Kwok-wing and El-Shafie, Ahmed (2021) Modeling the fluctuations of groundwater level by employing ensemble deep learning techniques. Engineering Applications of Computational Fluid Mechanics, 15 (1). pp. 1420-1439. ISSN 1994-2060, DOI https://doi.org/10.1080/19942060.2021.1974093.

Afrand, M. and Ahmadi Nadooshan, A. and Hassani, M. and Yarmand, H. and Dahari, M. (2016) Predicting the viscosity of multi-walled carbon nanotubes/water nanofluid by developing an optimal artificial neural network based on experimental data. International Communications in Heat and Mass Transfer, 77. pp. 49-53. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2016.07.008.

Afrand, M. and Nazari Najafabadi, K. and Sina, N. and Safaei, M.R. and Kherbeet, A.Sh. and Wongwises, S. and Dahari, M. (2016) Prediction of dynamic viscosity of a hybrid nano-lubricant by an optimal artificial neural network. International Communications in Heat and Mass Transfer, 76. pp. 209-214. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2016.05.023.

Afrasiab, M. and Faraji, G. and Tavakkoli, V. and Mashhadi, M.M. and Bushroa, Abdul Razak (2014) Excellent energy absorption capacity of nanostructured Cu–Zn thin-walled tube. Materials Science and Engineering: A, 599. pp. 141-144. ISSN 0921-5093, DOI https://doi.org/10.1016/j.msea.2014.01.081.

Afshar, O. and Saidur, Rahman and Hasanuzzaman, M. and Jameel, M. (2012) A review of thermodynamics and heat transfer in solar refrigeration system. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5639-5648. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.05.016.

Afshar Ghotli, Reza and Abbasi, Mohammad Reza and Bagheri, AmirHossein and Abdul Raman, Abdul Aziz and Ibrahim, Shaliza and Bostanci, Huseyin (2019) Experimental and modeling evaluation of droplet size in immiscible liquid-liquid stirred vessel using various impeller designs. Journal of the Taiwan Institute of Chemical Engineers, 100. pp. 26-36. ISSN 1876-1070, DOI https://doi.org/10.1016/j.jtice.2019.04.005.

Afzal, Asif and Islam, Md Tariqul and Kaladgi, Abdul Razak and Manokar, A. Muthu and Samuel, Olusegun D. and Mujtaba, M. A. and Soudagar, Manzoore Elahi M. and Fayaz, H. and Ali, Hafiz Muhammad (2022) Experimental investigation on the thermal performance of inserted helical tube three-fluid heat exchanger using graphene/water nanofluid. Journal of Thermal Analysis and Calorimetry, 147 (8). pp. 5087-5100. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-021-10869-1.

Afzal, Asif and Kaladgi, Abdul Razak and Jilte, R. D. and Ibrahim, Muhammad and Kumar, Rahul and Mujtaba, M. A. and Alshahrani, Saad and Saleel, C. Ahamed (2021) Thermal modelling and characteristic evaluation of electric vehicle battery system. Case Studies in Thermal Engineering, 26. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2021.101058.

Afzal, Asif and Soudagar, Manzoore Elahi M. and Belhocine, Ali and Kareemullah, Mohammed and Hossain, Nazia and Alshahrani, Saad and Saleel, Ahamed C. and Subbiah, Ram and Qureshi, Fazil and Mujtaba, Muhammad Abbas (2021) Thermal performance of compression ignition engine using high content biodiesels: A comparative study with diesel fuel. Sustainability, 13 (14). ISSN 2071-1050, DOI https://doi.org/10.3390/su13147688.

Ahamed, J.U. and Bhuiya, M.M.K. and Saidur, Rahman and Masjuki, Haji Hassan and Sarkar, M.A.R. and Sayem, A.S.M. and Islam, M. (2010) Forced convection heat transfer performance of porous twisted tape insert. Engineering e-Transaction, 5 (2). pp. 67-79. ISSN 1823-6379,

Ahamed, Jamal Uddin and Madlool, N.A. and Saidur, Rahman and Shahinuddin, M.I. and Kamyar, A. and Masjuki, Haji Hassan (2012) Assessment of energy and exergy efficiencies of a grate clinker cooling system through the optimization of its operational parameters. Energy, 46 (1). pp. 664-674. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2012.06.074.

Ahamed, Jamal Uddin and Saidur, Rahman and Masjuki, Haji Hassan (2010) Thermodynamic performance analysis of R-600 and R-600a as refrigerant. Engineering e-Transaction, 5 (1). pp. 11-18. ISSN 1823-6379,

Ahamed, Jamal Uddin and Saidur, Rahman and Masjuki, Haji Hassan (2011) A review on exergy analysis of vapor compression refrigeration system. Renewable and Sustainable Energy Reviews, 15 (3). pp. 1593-1600. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2010.11.039.

Ahamed, Jamal Uddin and Saidur, Rahman and Masjuki, Haji Hassan and Sattar, M.A. (2012) Energy and thermodynamic performance of LPG as an alternative refrigerant to R-134a in a domestic refrigerator. Energy Education Science and Technology Part A: Energy Science and Research, 29 (1). pp. 597-610. ISSN 1308-772X,

Ahamed, Jamal Uddin and Saidur, Rahman and Masjuki, Haji Hassan and Sattar, M.A. (2012) An analysis of energy, exergy, and sustainable development of a vapor compression refrigeration system using hydrocarbon. International Journal of Green Energy, 9 (7). pp. 702-717. ISSN 1543-5075, DOI https://doi.org/10.1080/15435075.2011.621491.

Ahmad, Aima Mariaty and Julai, Sabariah and Jauhari, Iswadi and Sultan, Norfazila Mohd (2023) In-pipe hydropower vertical axis parallel turbines prototype: performance and workability testing. Energy Sources Part A-Recovery Utilization and Environmental Effects, 45 (1). pp. 2317-2329. ISSN 1556-7230, DOI https://doi.org/10.1080/15567036.2023.2187098.

Ahmad, Farah B. and Kalam, M.A. and Zhang, Zhanying and Masjuki, H.H. (2022) Sustainable production of furan-based oxygenated fuel additives from pentose-rich biomass residues. Energy Conversion and Management: X, 14. ISSN 2590-1745, DOI https://doi.org/10.1016/j.ecmx.2022.100222.

Ahmad, Muhammad Shakeel and Shahid, M. M. and Shahabuddin, Syed and Munawar, Khadija and Abd Rahim, Nasrudin and Ahmed, Waqar (2022) Effect of concentration of MoS2 on the TCO-Pt free polyaniline nano-rod based counter electrode for dye sensitised solar cell application. Materials Technology, 37 (10). pp. 1366-1374. ISSN 1066-7857, DOI https://doi.org/10.1080/10667857.2021.1949526.

Ahmad, N. and Ghazilla, R.A.R. and Md Azizi, M.Z.H. (2016) Steady state visual evoked potential based BCI as control method for exoskeleton: A review. Malaysian Journal of Public Health Medicine, 16 (Sppl.1). pp. 86-94. ISSN 1675-0306,

Ahmad, Norasikin and Ang, Bee Chin and Amalina, Muhammad Afifi and Bong, Chui Wei (2018) Influence of Precursor Concentration and Temperature on the Formation of Nanosilver in Chemical Reduction Method. Sains Malaysiana, 47 (1). pp. 157-168. ISSN 0126-6039, DOI https://doi.org/10.17576/jsm-2018-4701-19.

Ahmad, Nur Farrahain Nadia and Nik Ghazali, Nik Nazri and Wong, Yew Hoong (2021) Mechanical and fluidic analysis of hollow side-open and outer-grooved design of microneedles. Materials Today Communications, 29. p. 102940. ISSN 2352-4928, DOI https://doi.org/10.1016/j.mtcomm.2021.102940.

Ahmad, Nur Farrahain Nadia and Nik Ghazali, Nik Nazri and Wong, Yew Hoong (2021) Wearable patch delivery system for artificial pancreas health diagnostic-therapeutic application: A review. Biosensors and Bioelectronics, 189. ISSN 0956-5663, DOI https://doi.org/10.1016/j.bios.2021.113384.

Ahmad, NurFarrahain Nadia and Nik Ghazali, Nik Nazri and Rani, Ahmad Taufiq Abdul and Othman, Mohammad Hafiz and Kee, Chia Ching and Jiwanti, Prastika Krisma and Rodriguez-Gomez, Arturo and Wong, Yew Hoong (2023) Finger-actuated micropump of constant flow rate without backflow. Micromachines, 14 (4). ISSN 2072-666X, DOI https://doi.org/10.3390/mi14040881.

Ahmad, Pervaiz and Khandaker, Mayeen Uddin and Muhammad, Nawshad and Ahmad, Iftikhar and Rauf Khan, M. Abdul and Khan, Ayaz Arif and Khan, Ghulamullah and Khan, Amir Sada and Ullah, Zahoor and Rehman, Fida and Ahmed, Syed Muzamil and Ali, Hazrat and Rehman, Muhammad Abdur and Gulzar, Mubashar and Iqbal, Javed and Shah, Syed Tawab and Ahmed, Sohail and Shafiq, Muhammad (2018) Decomposition-adsorption-deposition: An effective and novel technique for synthesis of hexagonal boron nitride microsheets. Materials Science in Semiconductor Processing, 88. pp. 161-166. ISSN 1369-8001, DOI https://doi.org/10.1016/j.mssp.2018.08.002.

Ahmad, Siti Nursyahirah and Manurung, Yupiter H. P. and Adenan, Mohd Shahriman and Yusof, Farazila and Mat, Muhd Faiz and Prajadhiana, Keval P. and Minggu, Zaidi and Leitner, Martin and Saidin, Salina (2022) Experimental validation of numerical simulation on deformation behaviour induced by wire arc additive manufacturing with feedstock SS316L on substrate S235. The International Journal of Advanced Manufacturing Technology, 119 (3-4). pp. 1951-1964. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-021-08340-4.

Ahmad, Siti Nursyahirah and Yahaya, Nor Afifah and Bahsan, Rosnadiah and Rozali, Shaifulazuar (2022) A study on the effect of gold nanoparticles for dye sensitized solar cell using Hibiscus Rosa-Sinensis as photosensitizer. International Journal of Integrated Engineering, 14 (5). 238 – 244. ISSN 2229-838X, DOI https://doi.org/10.30880/ijie.2022.14.05.027.

Ahmadipour, Mohsen and Bhattacharya, Anish and Sarafbidabad, Mohsen and Sazali, Ezza Syuhada and Ghoshal, Sib Krishna and Satgunam, Meenaloshini and Singh, Ramesh and Ardani, Mohammad Rezaei and Missaoui, Nadhem and Kahri, Hamza and Pal, Ujjwal and Pang, Ai Ling (2024) CA19-9 and CEA biosensors in pancreatic cancer. Clinica Chimica Acta, 554. p. 117788. ISSN 0009-8981, DOI https://doi.org/10.1016/j.cca.2024.117788.

Ahmadipour, Mohsen and Bhattacharya, Anish and Sarafbidabad, Mohsen and Syuhada Sazali, Ezza and Krishna Ghoshal, Sib and Satgunam, Meenaloshini and Singh, Ramesh and Rezaei Ardani, Mohammad and Missaoui, Nadhem and Kahri, Hamza and Pal, Ujjwal and Ling Pang, Ai (2024) CA19-9 and CEA biosensors in pancreatic cancer. Clinica Chimica Acta, 554. ISSN 0009-8981, DOI https://doi.org/10.1016/j.cca.2024.117788.

Ahmed, R. and Rifat, A.A. and Yetisen, A.K. and Dai, Q. and Yun, S.H. and Butt, H. (2016) Multiwall carbon nanotube microcavity arrays. Journal of Applied Physics, 119 (11). p. 113105. ISSN 0021-8979, DOI https://doi.org/10.1063/1.4944318.

Ahmed, R. and Rifat, A.A. and Yetisen, A.K. and Yun, S.H. and Khan, S. and Butt, H. (2016) Mode-multiplexed waveguide sensor. Journal of Electromagnetic Waves and Applications, 30 (4). pp. 444-455. ISSN 0920-5071, DOI https://doi.org/10.1080/09205071.2015.1117025.

Ahmed, S. and Ahmed, S. and Shumon, M.R.H. and Falatoonitoosi, E. and Quader, M.A. (2016) A comparative decision-making model for sustainable end-of-life vehicle management alternative selection using AHP and extent analysis method on fuzzy AHP. International Journal of Sustainable Development and World Ecology, 23 (1). pp. 83-97. ISSN 1350-4509, DOI https://doi.org/10.1080/13504509.2015.1062814.

Ahmed, S. and Ahmed, S. and Shumon, M.R.H. and Quader, M.A. and Cho, H.M. and Mahmud, M.I. (2016) Prioritizing Strategies for Sustainable End-of-Life Vehicle Management Using Combinatorial Multi-Criteria Decision Making Method. International Journal of Fuzzy Systems, 18 (3). pp. 448-462. ISSN 1562-2479, DOI https://doi.org/10.1007/s40815-015-0061-0.

Ahmed, S.E. and Hussein, A.K. and El-Aziz, M.M.A. and Sivasankaran, S. (2016) Conjugate natural convection in an inclined square porous enclosure with finite wall thickness and partially heated from its left sidewall. Heat Transfer Research, 47 (4). pp. 383-402. ISSN 1064-2285, DOI https://doi.org/10.1615/HeatTransRes.2016007964.

Ahmed, Shamsuddin and Masjuki, Haji Hassan and Taha, Zahari (2005) TPM can go beyond maintenance: excerpt from a case implementation. Journal of Quality in Maintenance Engineering, 11 (1). pp. 19-42. ISSN 1355-2511, DOI https://doi.org/10.1108/13552510510589352.

Ahmed, Syed Muzamil and Kazi, S. N. and Khan, Ghullamullah and Ahmed, Waqar and Mohd Zubir, Mohd Nashrul (2023) Heat transfer and friction loss of flowing kenaf core non-wood pulp fibre suspensions to curb reject papers. Heat and Mass Transfer, 59 (4). pp. 551-566. ISSN 0947-7411, DOI https://doi.org/10.1007/s00231-022-03281-4.

Ahmed, Syed Muzamil and Kazi, Salim Newaz and Khan, Ghulamullah and Sadri, Rad and Dahari, Mahidzal and Zubir, Mohd Nashrul Mohd and Sayuti, Mohd and Ahmad, Pervaiz and Ibrahim, Rushdan (2018) Effect of various refining processes for Kenaf Bast non-wood pulp fibers suspensions on heat transfer coefficient in circular pipe heat exchanger. Heat and Mass Transfer, 54 (3). pp. 875-882. ISSN 0947-7411, DOI https://doi.org/10.1007/s00231-017-2176-3.

Ahmed, Syed Muzamil and Kazi, Salim Newaz and Khan, Ghulamullah and Zubir, Mohd Nashrul Mohd and Dahari, Mahidzal and Ibrahim, Suriani and Abu Talip, Mohamad Sofian and Ahmad, Pervaiz and Chowdhury, Zaira Zaman (2019) Toward improved heat dissipation of the turbulent regime over backward-facing step for the AL2O3-water nanofluids: An experimental approach. Thermal Science, 23 (3 Part). pp. 1779-1789. ISSN 0354-9836, DOI https://doi.org/10.2298/TSCI170606236A.

Ahmed, Waqar and Alawi, Omer A. and Abdelrazek, Ali H. and Yaseen, Zaher Mundher and Falah, Mayadah W. and Hussein, Omar A. and Eltaweel, Mahmoud and Homod, Raad Z. and Sidik, Nor Azwadi Che (2023) Numerical and experimental evaluation of thermal enhancement using zinc nano-suspensions in a square flow passage. Journal of Thermal Analysis and Calorimetry, 148 (2). pp. 551-570. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-022-11734-5.

Ahmed, Waqar and Amin, Muhammad and Ahmed, Khaleeq and Mehmood, Shahid and Fayaz, H. and Mujtaba, M. A. and Soudagar, Manzoore Elahi M. and Gul, Mustabshirha (2022) Characteristics investigation of silicone rubber-based RTV/mu ATH@nSiO(2) micro/nano composites for outdoor high voltage insulation. Journal of Dispersion Science and Technology, 43 (9). pp. 1346-1358. ISSN 0193-2691, DOI https://doi.org/10.1080/01932691.2020.1857262.

Ahmed, Waqar and Chowdhury, Z. Z. and Kazi, S. N. and Johan, M. R. and Akram, Naveed and Oon, C. S. (2020) Effect of ZnO-water based nanofluids from sonochemical synthesis method on heat transfer in a circular flow passage. International Communications in Heat and Mass Transfer, 114. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2020.104591.

Ahmed, Waqar and Kazi, S. N. and Chowdhury, Zaira Zaman and Johan, Mohd Rafie and Soudagar, Manzoore Elahi M. and Mujtaba, M. A. and Gul, M. and Badruddin, Irfan Anjum and Kamangar, Sarfaraz (2021) Ultrasonic assisted new Al2O3@TiO2-ZnO/DW ternary composites nanofluids for enhanced energy transportation in a closed horizontal circular flow passage. International Communications in Heat and Mass Transfer, 120. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2020.105018.

Ahmed, Waqar and Kazi, Salim Newaz. and Chowdhury, Zaira Zaman and Johan, Mohd Rafie and Akram, Naveed and Mujtaba, M. A. and Gul, M. and Oon, Cheen Sean (2021) Experimental investigation of convective heat transfer growth on ZnO@TiO2/DW binary composites/hybrid nanofluids in a circular heat exchanger. Journal of Thermal Analysis and Calorimetry, 143 (2). pp. 879-898. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-020-09363-x.

Ahmed, Waqar and Sidik, Nor Azwadi Che and Mehmood, Shahid and Alam, Mir Waqas and Fayaz, H. and Hussain, Muhammad Iqbal and Alawi, Omer A. and Ahmed, Syed Muzamil and Shah, Syed Nadeem Abbas and Kazi, S. N. (2022) Effects of thermophysical, hydrodynamics and thermal characteristics of well stable metallic nanofluids on energy transportation. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 147 (23). pp. 13879-13900. ISSN 1588-2926, DOI https://doi.org/10.1007/s10973-022-11696-8.

Ahmmad, Md. Shahabuddin and Masjuki, Haji Hassan and Kalam, Md. Abul (2018) Comparative corrosion characteristics of automotive materials in Jatropha biodiesel. International Journal of Green Energy, 15 (6). pp. 393-399. ISSN 1543-5075, DOI https://doi.org/10.1080/15435075.2018.1464925.

Aizura, A.B. and Mahlia, T.M.I. and Masjuki, Haji Hassan (2010) Potential fuel savings and emissions reduction from fuel economy standards implementation for motor-vehicles. Clean Technologies and Environmental Policy, 12 (3). pp. 255-263. ISSN 1618-954X,

Akbari, O.A. and Safaei, M.R. and Goodarzi, M. and Akbar, N.S. and Zarringhalam, M. and Shabani, G.A.S. and Dahari, M. (2016) A modified two-phase mixture model of nanofluid flow and heat transfer in a 3-D curved microtube. Advanced Powder Technology, 27 (5). pp. 2175-2185. ISSN 0921-8831, DOI https://doi.org/10.1016/j.apt.2016.08.002.

Akbari, O.A. and Toghraie, A. and Karimipour, A. and Safaei, M.R. and Goodarzi, M. and Alipour, H. and Dahari, M. (2016) Investigation of rib's height effect on heat transfer and flow parameters of laminar water-Al2O3 nanofluid in a rib-microchannel. Applied Mathematics and Computation, 290. pp. 135-153. ISSN 0096-3003, DOI https://doi.org/10.1016/j.amc.2016.05.053.

Akhiani, Amir Reza and Metselaar, Hendrik Simon Cornelis and Ang, Bee Chin and Mehrali, Mehdi and Mehrali, Mohammad (2022) Highly hydrophobic silanized melamine foam for facile and uniform assembly of graphene nanoplatelet towards efficient light-to-thermal energy storage. Materials Today Energy, 28. ISSN 2468-6069, DOI https://doi.org/10.1016/j.mtener.2022.101077.

Akhtar, Naseem and Teo, Yin Yin and Najeeb, Mansoor Ani and Ahmad, Zubair and Shah, Zarbad and Hasan, Md Anwarul (2018) Synthesis and Characterization of Magnetic Nanostructured Lipid Carriers (mNLCs) for Drug Delivery. International Journal of Electrochemical Science, 13 (12). pp. 12040-12048. ISSN 1452-3981, DOI https://doi.org/10.20964/2018.12.02.

Akinwekomi, Akeem Damilola and Tang, Chak Yin and Tsui, Gary Chi Pong and Law, Wing Cheung and Chen, Ling and Yang, Xu Sheng and Abd Shukor, Mohd Hamdi (2018) Synthesis and characterisation of floatable magnesium alloy syntactic foams with hybridised cell morphology. Materials & Design, 160. pp. 591-600. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2018.10.004.

Akkoli, K. M. and Banapurmath, N. R. and Shivashimpi, M. M. and Soudagar, Manzoore Elahi M. and Badruddin, Irfan Anjum and Alazwari, Mashhour A. and Yaliwal, V. S. and Mujtaba, M. A. and Akram, Naveed and Goodarzi, Marjan and Safaei, Mohammad Reza and Venu, Harish (2021) Effect of injection parameters and producer gas derived from redgram stalk on the performance and emission characteristics of a diesel engine. Alexandria Engineering Journal, 60 (3). pp. 3133-3142. ISSN 1110-0168, DOI https://doi.org/10.1016/j.aej.2021.01.047.

Akkoli, K. M. and Banapurmath, N. R. and Suresh, G. and Soudagar, Manzoore Elahi M. and Khan, T. M. Yunus and Baig, Maughal Ahmed Ali and Mujtaba, M. A. and Hossain, Nazia and Shahapurkar, Kiran and Elfasakhany, Ashraf and Alsehli, Mishal and Yaliwal, V. S. and Goudadi, S. A. (2021) Effect of Producer Gas from Redgram Stalk and Combustion Chamber Types on the Emission and Performance Characteristics of Diesel Engine. Energies, 14 (18). ISSN 1996-1073, DOI https://doi.org/10.3390/en14185879.

Akram, Naveed and Hosseini, Maryam and Sadri, Rad and Kazi, Salim Newaz and Kasaeian, Alibakhsh and Yarmand, Hooman and Hooman, Kamel and Ahmad, Roslina (2022) A facile, green fabrication of aqueous nanofluids containing hydrophilic functionalized carbon nanotubes toward improving heat transfer in a closed horizontal flow passage. Powder Technology, 404. ISSN 0032-5910, DOI https://doi.org/10.1016/j.powtec.2022.117451.

Akram, Naveed and Sadri, Rad and Kazi, S. N. and Zubir, Mohd Nashrul Mohd and Ridha, Mohd and Ahmed, Waqar and Soudagar, Manzoore Elahi M. and Arzpeyma, Mazdak (2020) A comprehensive review on nanofluid operated solar flat plate collectors. Journal of Thermal Analysis and Calorimetry, 139 (2). pp. 1309-1343. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-019-08514-z.

Al Kouzbary, Mouaz and Al Kouzbary, Hamza and Liu, Jingjing and Khamis, Taha and Al-Hashimi, Zaina and Shasmin, Hanie Nadia and Arifin, Nooranida and Abu Osman, Noor Azuan (2022) Robotic knee prosthesis with cycloidal gear and four-bar mechanism optimized using particle swarm algorithm. Actuators, 11 (9). ISSN 2076-0825, DOI https://doi.org/10.3390/act11090253.

Al Mahmud, K.A.H. and Kalam, M.A. and Masjuki, Haji Hassan and Mobarak, H.M. and Zulkifli, N.W.M. (2015) An updated overview of diamond-like carbon coating in tribology. Critical Reviews in Solid State and Materials Sciences, 40 (2). pp. 90-118. ISSN 1040-8436, DOI https://doi.org/10.1080/10408436.2014.940441.

Al Mahmud, Suaib and Khan, Mazbahur Rahman and Noor, Wazed Ibne and Ismail, Ahmad Faris and Momin, Md. Abdul and Bappy, Jamirul Habib (2023) Turbulent convective heat transfer enhancement modeling of water-Al2O3 nanofluid using CFD mixture model and adaptive neural fuzzy inference system. Numerical Heat Transfer Part B-Fundamentals, 83 (3). pp. 120-138. ISSN 1040-7790, DOI https://doi.org/10.1080/10407790.2022.2149197.

Al Momani, Derar and Al Turk, Yousef and Abuashour, Mohammed I. and Khalid, Haris M. and Muyeen, S. M. and Sweidan, Tha'er O. and Said, Zafar and Hasanuzzaman, Md (2023) Energy saving potential analysis applying factory scale energy audit: A case study of food production. Heliyon, 9 (3). ISSN 2405-8440, DOI https://doi.org/10.1016/j.heliyon.2023.e14216.

Al'Aidrus, Sharifah Nuriza Binti Syed Muhammad Naquib and Siri, Zailan and Mohd Zubir, Mohd Nashrul (2021) Marangoni convection of nanofluid in a wavy trapezoidal enclosure. Thermal Science, 25 (SI). S339-S345. ISSN 0354-9836, DOI https://doi.org/10.2298/TSCI21S2339A.

Al-Azawi, M.A. and Bidin, N. and Bououdina, C. and Alshanableh, A. and Salih, E.Y. (2016) The effects of liquid environment on ablation efficiency and morphology of gold nanoparticles prepared by laser ablation technique. Journal of Nano Research, 37. pp. 99-108. ISSN 1662-5250, DOI https://doi.org/10.4028/www.scientific.net/JNanoR.37.99.

Al-Dahiree, Omar Sabah and Raja Ghazilla, Raja Ariffin and Tokhi, Mohammad Osman and Yap, Hwa Jen and Albaadani, Emad Abdullah (2022) Design of a compact energy storage with rotary series elastic actuator for lumbar support exoskeleton. Machines, 10 (7). ISSN 2075-1702, DOI https://doi.org/10.3390/machines10070584.

Al-Dahiree, Omar Sabah and Tokhi, Mohammad Osman and Hadi, Nabil Hassan and Hmoad, Nassar Rasheid and Ghazilla, Raja Ariffin Raja and Yap, Hwa Jen and Albaadani, Emad Abdullah (2022) Design and shape optimization of strain gauge load cell for axial force measurement for test benches. Sensors, 22 (19). ISSN 1424-8220, DOI https://doi.org/10.3390/s22197508.

Al-Douri, Y. and Gherab, K. and Batoo, Khalid Mujasam and Raslan, Emad H. (2020) Detecting the DNA of dengue serotype 2 using aluminium nanoparticle doped zinc oxide nanostructure: Synthesis, analysis and characterization. Journal of Materials Research and Technology-JMR&T, 9 (3). pp. 5515-5523. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2020.03.076.

Al-Faqheri, Wisam and Ibrahim, Fatimah and Thio, Tzer Hwai Gilbert and Moebius, Jacob and Joseph, Karunan and Arof, Hamzah and Madou, Marc (2013) Vacuum/Compression Valving (VCV) using parrafin-wax on a centrifugal microfluidic CD platform. PLoS ONE, 8 (3). e58523. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0058523.

Al-Fatlawi, A.W.A. and Rahim, Nasrudin Abd and Saidur, R. and Ward, T.A. (2015) Improving solar energy prediction in complex topography using artificial neural networks: Case study Peninsular Malaysia. Environmental Progress & Sustainable Energy, 34 (5). pp. 1528-1535. ISSN 1944-7442, DOI https://doi.org/10.1002/ep.12130.

Al-Mansob, R.A. and Ismail, A. and Yusoff, N.I.M. and Albrka, S.I. and Azhari, C.H. and Karim, M.R. (2016) Rheological characteristics of unaged and aged epoxidised natural rubber modified asphalt. Construction and Building Materials, 102 (Part 1). pp. 190-199. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.10.133.

Al-Obaidi, S.M.A. and Salman Leong, M. and Raja Hamzah, R.I. and Abdelrhman, A.M. and Danaee, M. (2016) Acoustic emission parameters evaluation in machinery condition monitoring by using the concept of multivariate analysis. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7507-7514. ISSN 1819-6608,

Al-Saeedi, S. and Sarhan, A.A.D. and Bushroa, A.R. (2015) Investigating the surface tribology of roller-burnished polymer using the fuzzy rule-based approach. Tribology Transactions, 58 (2). pp. 240-246. ISSN 1040-2004, DOI https://doi.org/10.1080/10402004.2014.962205.

Al-Saeedi, Salman and Sarhan, Ahmed Aly Diaa Mohammed and Bushroa, Abdul Razak (2018) Investigating the Tribological Characteristics of Burnished Polyoxymethylene—ANFIS and FE Modeling. Tribology Transactions, 61 (5). pp. 880-888. ISSN 1040-2004, DOI https://doi.org/10.1080/10402004.2018.1439208.

Al-Ta'ii, Hassan M. Jaber and Ijam, Ali (2022) Investigating the impact of alpha particles energy level on the DNA-Schottky diode behavior. Physica B-Condensed Matter, 640. ISSN 0921-4526, DOI https://doi.org/10.1016/j.physb.2022.414004.

AlDahoul, Nouar and Ahmed, Ali Najah and Allawi, Mohammed Falah and Sherif, Mohsen and Sefelnasr, Ahmed and Chau, Kwok-wing and El-Shafie, Ahmed (2022) A comparison of machine learning models for suspended sediment load classification. Engineering Applications of Computational Fluid Mechanics, 16 (1). pp. 1211-1232. ISSN 1994-2060, DOI https://doi.org/10.1080/19942060.2022.2073565.

Alavi, S.M.A. and Safaei, M.R. and Mahian, O. and Goodarzi, M. and Yarmand, H. and Dahari, M. and Wongwises, S. (2015) A hybrid finite-element/finite-difference scheme for solving the 3-D energy equation in transient nonisothermal fluid flow over a staggered tube bank. Numerical Heat Transfer Part B-Fundamentals, 68 (2). pp. 169-183. ISSN 1040-7790, DOI https://doi.org/10.1080/10407790.2015.1012440.

Alawi, Omer A. and Kamar, Haslinda Mohamed and Abdelrazek, Ali H. and Mallah, A. R. and Mohammed, Hussein A. and Abdulla, Aziz Ibrahim and Gatea, Hamed Alwan and Khiadani, Mehdi and Kazi, Salim Newaz and Yaseen, Zaher Mundher (2022) Hydrothermal and energy analysis of flat plate solar collector using copper oxide nanomaterials with different morphologies: Economic performance. Sustainable Energy Technologies and Assessments, 49. ISSN 2213-1388, DOI https://doi.org/10.1016/j.seta.2021.101772.

Alawi, Omer A. and Mallah, A. R. and Kazi, S. N. (2020) Covalently functionalized pentaethylene glycol-thermally treated graphene towards enhanced thermophysical and heat transfer characteristics. Journal of Thermal Analysis and Calorimetry, 140 (2). pp. 859-874. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-019-08831-3.

Alawi, Omer A. and Sidik, Nor Azwadi Che and Xian, Hong Wei and Kean, Tung Hao and Kazi, Salim Newaz (2018) Thermal conductivity and viscosity models of metallic oxides nanofluids. International Journal of Heat and Mass Transfer, 116. pp. 1314-1325. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2017.09.133.

Albatsh, F.M. and Ahmad, S. and Mekhilef, Saad and Mokhlis, H. and Hassan, M.A. (2015) Optimal placement of unified power flow controllers to improve dynamic voltage stability using power system variable based voltage stability indices. PLoS ONE, 10 (4). p. 32. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0123802.

Alfellag, Mohanad A. and Kamar, Haslinda Mohamed and Abidin, Ummikalsom and Kazi, Salim Newaz and Alawi, Omer A. and Muhsan, Ali S. and Sidik, Nor Azwadi Che and Shaikh, Kaleemullah and Khan, Wajahat Ahmed (2024) Green synthesized clove-treated carbon nanotubes/titanium dioxide hybrid nanofluids for enhancing flat-plate solar collector performance. Applied Thermal Engineering, 246. p. 122982. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2024.122982.

Alfellag, Mohanad A. and Kamar, Haslinda Mohamed and Abidin, Ummikalsom and Kazi, Salim Newaz and Sidik, Nor Azwadi Che and Muhsan, Ali S. and Alawi, Omer A. (2024) Optimizing mixing ratio of multi-walled carbon nanotubes and titanium dioxide: A green approach to high-performance hybrid nanofluids for heat transfer. Powder Technology, 436. ISSN 0032-5910, DOI https://doi.org/10.1016/j.powtec.2024.119509.

Alfellag, Mohanad A. and Kamar, Haslinda Mohamed and Abidin, Ummikalsom and Kazi, Salim Newaz and Sidik, Nor Azwadi Che and Muhsan, Ali S. and Alawi, Omer A. (2024) Optimizing mixing ratio of multi-walled carbon nanotubes and titanium dioxide: A green approach to high-performance hybrid nanofluids for heat transfer. Powder Technology, 436. p. 119509. ISSN 0032-5910, DOI https://doi.org/10.1016/j.powtec.2024.119509.

Ali, Abdelrahman and Salem, Ayman M. H. and Muthalif, Asan G. A. and Ramli, Rahizar and Julai, Sabariah (2022) Development of a performance-enhanced hybrid magnetorheological elastomer-fluid for semi-active vibration isolation: Static and dynamic experimental characterization. Materials, 15 (9). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15093238.

Ali, Alamry and Andriyana, Andri and Hassan, Shukur Bin Abu and Ang, Bee Chin (2021) Fabrication and thermo-electro and mechanical properties evaluation of helical multiwall carbon nanotube-carbon fiber/epoxy composite laminates. Polymers, 13 (9). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13091437.

Ali, B. and Sabri, M.F.M. and Jauhari, I. and Sukiman, N.L. (2016) Impact toughness, hardness and shear strength of Fe and Bi added Sn-1Ag-0.5Cu lead-free solders. Microelectronics Reliability, 63. pp. 224-230. ISSN 0026-2714, DOI https://doi.org/10.1016/j.microrel.2016.05.004.

Ali, Bakhtiar and Sabri, Mohd Faizul Mohd and Said, Suhana Mohd and Sukiman, Nazatul Liana and Jauhari, Iswadi and Mahdavifard, Mohammad Hossein (2018) Microstructural and tensile properties of Fe and Bi added Sn-1Ag-0.5Cu solder alloy under high temperature environment. Microelectronics Reliability, 82. pp. 171-178. ISSN 0026-2714, DOI https://doi.org/10.1016/j.microrel.2018.01.015.

Ali, M.B. and Saidur, Rahman and Hasanuzzaman, M. and Ward, T.A. (2012) Energy and emission analysis in the malaysian food industries. Environmental Progress and Sustainable Energy, 27 (4). n/a-n/a. ISSN 1944-7450, DOI https://doi.org/10.1002/ep.11682.

Ali, M.B. and Saidur, Rahman and Hossain, M.S. (2011) A review on emission analysis in cement industries. Renewable and Sustainable Energy Reviews, 15 (5). pp. 2252-2261. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2011.02.014.

Ali, Mohammed Abdo Hashem and Radzak, Muhammad Sawal A. and Mailah, Musa and Yusoff, Nukman and Abd Razak, Bushroa and Ab Karim, Mohd Sayuti and Ameen, Wadea and Jabbar, Waheb A. and Alsewari, AbdulRahman A. and Rassem, Taha H. and Nasser, Abdullah B. and Abdulghafor, Rawad (2021) A novel inertia moment estimation algorithm collaborated with Active Force Control scheme for wheeled mobile robot control in constrained environments. Expert Systems with Applications, 183. ISSN 0957-4174, DOI https://doi.org/10.1016/j.eswa.2021.115454.

Ali, Muhammad Shujaat and Anwar, Zahid and Mujtaba, Muhammad Abbas and Soudagar, Manzoore Elahi M. and Badruddin, Irfan Anjum and Safaei, Mohammad Reza and Iqbal, Asim and Afzal, Asif and Razzaq, Luqman and Khidmatgar, Abdulqhadar and Goodarzi, Marjan (2021) Two-phase frictional pressure drop with pure refrigerants in vertical mini/micro-channels. Case Studies in Thermal Engineering, 23. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2020.100824.

Ali, O.M. and Mamat, R. and Masjuki, Haji Hassan and Abdullah, A.A. (2016) Analysis of blended fuel properties and cycle-to-cycle variation in a diesel engine with a diethyl ether additive. Energy Conversion and Management, 108. pp. 511-519. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.11.035.

Ali Bashir, Mohamed Bashir and Said, Suhana Mohd and Sabri, Mohd Faizul Mohd and Miyazaki, Yuzuru and Shnawah, Dhafer Abdul Ameer and Shimada, Masanori and Elsheikh, Mohamed Hamid (2018) Enhancement of Thermoelectric Properties of Yb0.25Co4Sb12 Skutterudites through Ni Substitution. Sains Malaysiana, 47 (1). pp. 181-187. ISSN 0126-6039, DOI https://doi.org/10.17576/jsm-2018-4701-21.

Alias, Rodianah and Mahmoodian, Reza and Abd Shukor, Mohd (2020) Effect of temperature ramp rate on the morphology, phase and adhesion strength of Ag-Ta2O5 thin film. JOMME, 72 (2). pp. 697-705. ISSN 10474838, DOI https://doi.org/10.1007/s11837-019-03794-0.

Alias, Rodianah and Mahmoodian, Reza and Genasan, Krishnamurithy and Vellasamy, Kumutha Malar and Abd Shukor, Mohd Hamdi and Kamarul, Tunku (2020) Mechanical, antibacterial, and biocompatibility mechanism of PVD grown silver–tantalum-oxide-based nanostructured thin film on stainless steel 316L for surgical applications. Materials Science and Engineering: C, 107. p. 110304. ISSN 0928-4931, DOI https://doi.org/10.1016/j.msec.2019.110304.

Alias, Rodianah and Rizwan, Muhammad and Mahmoodian, Reza and Vellasamy, K. M. and Hamdi, Mohd (2021) Physico-chemical and antimicrobial properties of Ag/Ta2O5 nanocomposite coatings. Ceramics International, 47 (17). pp. 24139-24148. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2021.05.125.

Alkawaz, Ali Najem and Kanesan, Jeevan and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Hussien, Mohamed and Baig, Maughal Ahmed Ali and Ahammad, N. Ameer (2023) Adaptive self-organizing map using optimal control. Mathematics, 11 (9). ISSN 2227-7390, DOI https://doi.org/10.3390/math11091995.

Almasi, D. and Iqbal, N. and Sadeghi, M. and Sudin, I. and Abdul Kadir, M.R. and Kamarul, T. (2016) Preparation Methods for Improving PEEK’s Bioactivity for Orthopedic and Dental Application: A Review. International Journal of Biomaterials, 2016. pp. 1-12. ISSN 1687-8787, DOI https://doi.org/10.1155/2016/8202653.

Alnahhal, Ahmed Mahmoud and Alengaram, U. Johnson and Yusoff, Sumiani and Singh, Ramesh and Radwan, Mohammed K. H. and Deboucha, Walid (2021) Synthesis of sustainable lightweight foamed concrete using palm oil fuel ash as a cement replacement material. Journal Of Building Engineering, 35. ISSN 2352-7102, DOI https://doi.org/10.1016/j.jobe.2020.102047.

Alnahhal, Ahmed Mahmoud and Alengaram, Ubagaram Johnson and Ibrahim, Muhammad Shazril Idris and Yusoff, Sumiani and Metselaar, Hendrik Simon Cornelis and Johnson, Petrina Gabriela (2022) Synthesis of ternary binders and sand-binder ratio on the mechanical and microstructural properties of geopolymer foamed concrete. Construction and Building Materials, 349. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2022.128682.

Amar, Muhammad and Akram, Naveed and Chaudhary, Ghulam Qadar and Kazi, Salim Newaz and Soudagar, Manzoore Elahi M. and Mubarak, Nabisab Mujawar and Abul Kalam, Md (2023) Energy, exergy and economic (3E) analysis of flat-plate solar collector using novel environmental friendly nanofluid. Scientific Reports, 13 (1). ISSN 2045-2322, DOI https://doi.org/10.1038/s41598-023-27491-w.

Ambarwati, Neneng Siti Silfi and Elya, Berna and Malik, Amarila and Hanafi, Muhammad and Awang, Muhamad Sharul Nizam (2022) Isolation, identification, and antibacterial of amentoflavone from garcinia latissima miq. Leaves. International Journal of Applied Pharmaceutics, 14 (Specia). 67 -73. ISSN 0975-7058, DOI https://doi.org/10.22159/ijap.2022.v14s3.13.

Amin, N. A. A. M. and Said, S. M. and Salleh, M. F. M. and Muhammad Afifi, Amalina and Ibrahim, N. M. J. N. and Hasnan, M. M. I. M. and Tahir, M. and Hashim, N. Z. I. (2023) Review of Fe-based spin crossover metal complexes in multiscale device architectures. Inorganica Chimica Acta, 544. ISSN 0020-1693, DOI https://doi.org/10.1016/j.ica.2022.121168.

Amini, H. and Dabbagh, V. and Rezaei, S.M. and Zareinejad, M. and Mardi, N.A. and Sarhan, A.A.D. (2015) Robust control-based linear bilateral teleoperation system without force sensor. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 37 (2). pp. 579-587. ISSN 1678-5878, DOI https://doi.org/10.1007/s40430-014-0207-2.

Amini, H. and Farzaneh, B. and Azimifar, F. and Sarhan, A.A.D. (2016) Sensor-less force-reflecting macro–micro telemanipulation systems by piezoelectric actuators. ISA Transactions, 64. pp. 293-302. ISSN 0019-0578, DOI https://doi.org/10.1016/j.isatra.2016.05.006.

Amini, H. and Rezaei, S.M. and Sarhan, A.A.D. and Akbari, J. and Mardi, N.A. (2015) Transparency improvement by external force estimation in a time-delayed nonlinear bilateral teleoperation system. Journal of Dynamic Systems Measurement and Control-Transactions of the Asme, 137 (5). p. 15. ISSN 0022-0434, DOI https://doi.org/10.1115/1.4029077.

Aminuddin, N.I. and Ahmad, Roslina and Ansari, H.M. and Mohd Zain, Norita and Akbar, S.A. and Pingguan-Murphy, Belinda (2016) Human fetal osteoblast cell response to self-assembled nanostructures on YSZ-(110) single crystal substrates. Materials & Design, 94. pp. 274-279. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2015.12.173.

Amir, Z. and Jan, B.M. and Khalil, M. and Wahab, A.K.A. and Hassan, Z. (2015) Rheological behavior and temperature dependency study of Sara line-based super lightweight completion fluid. Journal of Petroleum Science and Engineering, 130. pp. 106-113. ISSN 0920-4105, DOI https://doi.org/10.1016/j.petrol.2015.03.022.

Amir, Z. and Jan, B.M. and Wahab, A.K.A. and Khalil, M. and Ali, B.S. and Chong, W.T. (2016) Viscosity prediction model optimization for Saraline-based super lightweight completion fluid at high pressure and temperature. Petroleum Exploration and Development, 43 (5). pp. 863-868. ISSN 1876-3804, DOI https://doi.org/10.1016/S1876-3804(16)30103-3.

Amir, Zulhelmi and Mohd Saaid, Ismail and Mohamed Jan, Badrul (2018) An Optimization Study of Polyacrylamide-Polyethylenimine-Based Polymer Gel for High Temperature Reservoir Conformance Control. International Journal of Polymer Science, 2018. pp. 1-10. ISSN 1687-9422, DOI https://doi.org/10.1155/2018/2510132.

Amiri, A. and Ahmadi, G. and Shanbedi, M. and Etemadi, M. and Zubir, M.N.M. and Chew, B.T. and Kazi, S.N. (2016) Heat transfer enhancement of water-based highly crumpled few-layer graphene nanofluids. RSC Advances, 6 (107). pp. 105508-105527. ISSN 2046-2069, DOI https://doi.org/10.1039/c6ra22365f.

Amiri, A. and Arzani, H.K. and Kazi, S.N. and Chew, B.T. and Badarudin, A. (2016) Backward-facing step heat transfer of the turbulent regime for functionalized graphene nanoplatelets based water-ethylene glycol nanofluids. International Journal of Heat and Mass Transfer, 97. pp. 538-546. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2016.02.042.

Amiri, A. and Sadri, R. and Ahmadi, G. and Chew, B.T. and Kazi, S.N. and Shanbedi, M. and Alehashem, M.S. (2015) Synthesis of polyethylene glycol-functionalized multi-walled carbon nanotubes with a microwave-assisted approach for improved heat dissipation. RSC Advances, 5 (45). pp. 35425-35434. ISSN 2046-2069, DOI https://doi.org/10.1039/c5ra02736e.

Amiri, A. and Sadri, R. and Shanbedi, M. and Ahmadi, G. and Chew, B.T. and Kazi, Salim Newaz and Dahari, Mahidzal (2015) Performance dependence of thermosyphon on the functionalization approaches: An experimental study on thermo-physical properties of graphene nanoplatelet-based water nanofluids. Energy Conversion and Management, 92. pp. 322-330. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.12.051.

Amiri, A. and Shanbedi, M. and Ahmadi, G. and Eshghi, H. and Kazi, S.N. and Chew, B.T. and Savari, M. and Zubir, M.N.M. (2016) Mass production of highly-porous graphene for high-performance supercapacitors. Scientific Reports, 6. p. 32686. ISSN 2045-2322, DOI https://doi.org/10.1038/srep32686.

Amiri, A. and Shanbedi, M. and AliAkbarzade, M.J. (2016) The Specific Heat Capacity, Effective Thermal Conductivity, Density, and Viscosity of Coolants Containing Carboxylic Acid Functionalized Multi-Walled Carbon Nanotubes. Journal of Dispersion Science and Technology, 37 (7). pp. 949-955. ISSN 0193-2691, DOI https://doi.org/10.1080/01932691.2015.1074588.

Amiri, A. and Shanbedi, M. and Chew, B.T. and Kazi, S.N. and Solangi, K.H. (2016) Toward improved engine performance with crumpled nitrogen-doped graphene based water-ethylene glycol coolant. Chemical Engineering Journal, 289. pp. 583-595. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2015.12.083.

Amiri, A. and Zubir, M.N.M. and Dimiev, A.M. and Teng, K.H. and Shanbedi, M. and Kazi, S.N. and Rozali, S. (2017) Facile, environmentally friendly, cost effective and scalable production of few-layered graphene. Chemical Engineering Journal, 326. pp. 1105-1115. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2017.06.046.

Amiri, Iraj Sadegh and Ariannejad, Mohammad Mahdi and Vigneswaran, Dhasarathan and Lim, Chin Seong and Yupapin, Preecha Promphan (2018) Performances and procedures modules in micro electro mechanical system packaging technologies. Results in Physics, 11. pp. 306-314. ISSN 2211-3797, DOI https://doi.org/10.1016/j.rinp.2018.09.008.

Amran, Anisah and Ahmad, Farah and Akmal, Mohd Hatta Maziati and Ralib, Aliza Aini Md and Bin Suhaimi, Muhammad Irsyad (2021) Biosynthesis of thin film derived from microbial chitosan for piezoelectric application. Materials Today Communications, 29. p. 102919. ISSN 2352-4928, DOI https://doi.org/10.1016/j.mtcomm.2021.102919.

Ananzeh, Hammam M. and Ramli, Rahizar and Julai, Sabariah and Muthalif, Asan G.A. (2024) Mechanical Properties Comparison of Isotropic vs. Anisotropic Hybrid Magnetorheological Elastomer-Fluid. Polymers, 16 (9). p. 1215. ISSN 2073-4360, DOI https://doi.org/10.3390/polym16091215.

Ang, Bee Chin and Ahmad, N. and Ong, Zhi Chao and Cheok, S.C. and Chan, H.F. (2016) Study of the mechanical and the thermal insulation properties of polyurethane coating containing chicken eggshell and rice husk ash as fillers. Pigment & Resin Technology, 45 (5). pp. 313-319. ISSN 0369-9420, DOI https://doi.org/10.1108/PRT-05-2015-0050.

Annuar, N. Syahira M. and Mahmoodian, Reza and Abd Shukor, Mohd Hamdi (2020) Effect of focused ion beam process parameter on Tin-Nickel-Copper micropillars microfabrication. Materials and Manufacturing Processes, 35 (2). pp. 163-171. ISSN 1042-6914, DOI https://doi.org/10.1080/10426914.2020.1711923.

Annuar, N.Z.M. and Sabri, M.F.M. and Bakar, A.S.A. (2014) Modeling and simulation of metal organic halide vapor phase epitaxy (MOHVPE) growth chamber. Microsystem Technologies, 21 (1). pp. 309-318. ISSN 0946-7076, DOI https://doi.org/10.1007/s00542-013-2046-y.

Annuar, Nurul Zieyana Mohamed and Sabri, Mohd Faizul Mohd and Shuhaimi, Ahmad (2015) Modeling and simulation of metal organic halide vapor phase epitaxy (MOHVPE) growth chamber. Microsystem Technologies, 21 (1). pp. 309-318. ISSN 0946-7076, DOI https://doi.org/10.1007/s00542-013-2046-y.

Ansu, Alok Kumar and Sharma, Ravi K. and Tyagi, Vineet V. and Sari, Ahmet and Ganesan, Poobalan and Tripathi, Dharmendra (2020) A cycling study for reliability, chemical stability and thermal durability of polyethylene glycols of molecular weight 2000 and 10000 as organic latent heat thermal energy storage materials. International Journal of Energy Research, 44 (3). pp. 2183-2195. ISSN 0363-907X, DOI https://doi.org/10.1002/er.5079.

Anwar, Ayaz and Minhaz, Aaliya and Khan, Naveed Ahmed and Kalantari, Katayoon and Afifi, Amalina Muhammad and Shah, Muhammad Raza (2018) Synthesis of gold nanoparticles stabilized by a pyrazinium thioacetate ligand: A new colorimetric nanosensor for detection of heavy metal Pd(II). Sensors and Actuators B: Chemical, 257. pp. 875-881. ISSN 0925-4005, DOI https://doi.org/10.1016/j.snb.2017.11.040.

Aqilah, Nur and Faizal, W.M. and Khor, C.Y. and Nik Ghazali, Nik Nazri and Zainon, Mohd Zamri and Ismail, Muhammad Aiman (2022) Computational fluid dynamic study of the pharyngeal airway characteristics before and after mandibular setback surgery in patients with mandibular prognathism. CFD Letters, 14 (3). 68 -78. ISSN 2180-1363, DOI https://doi.org/10.37934/cfdl.14.3.6878.

Arada, Ahmad Housam and Ozturk, Baki and Kassem, Moustafa Moufid and Nazri, Fadzli Mohamed and Tan, Chee Ghuan (2022) Optimization of Sky-Bridge location at coupled high-rise buildings considering seismic vulnerability functions. Structural Engineering and Mechanics, 82 (3). pp. 385-400. ISSN 1225-4568, DOI https://doi.org/10.12989/sem.2022.82.3.385.

Arafat, M. M. and Dinan, B. and Haseeb, A. S. M. A. and Akbar, S. A. and Rahman, B. M. A. and Rozali, S. and Naher, S. (2021) Growth of 1D TiO2 nanostructures on Ti substrates incorporated with residual stress through humid oxidation and their characterizations. Nanotechnology, 32 (47). ISSN 0957-4484, DOI https://doi.org/10.1088/1361-6528/ac1d77.

Arafat, M. M. and Rozali, S. and Haseeb, A. S. M. A. and Ibrahim, S. (2020) Direct and catalyst-free synthesis of ZnO nanowires on brass by thermal oxidation. Nanotechnology, 31 (17). ISSN 0957-4484, DOI https://doi.org/10.1088/1361-6528/ab69b3.

Arafat, M.M. and Haseeb, A.S. Md. Abdul and Akbar, S.A. (2015) Growth and characterization of the oxide scales and core/shell nanowires on Ti-6Al-4 V particles during thermal oxidation. Ceramics International, 41 (3). pp. 4401-4409. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2014.11.130.

Arafat, M.M. and Ong, Ji Yan and Haseeb, A.S. Md. Abdul (2018) Selectivity shifting behavior of Pd nanoparticles loaded zinc stannate/zinc oxide (Zn2SnO4/ZnO) nanowires sensors. Applied Surface Science, 435. pp. 928-936. ISSN 0169-4332, DOI https://doi.org/10.1016/j.apsusc.2017.10.211.

Arbab, M.I. and Varman, M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Imtenan, S. and Sajjad, H. and Fattah, I.M.R. (2015) Evaluation of combustion, performance, and emissions of optimum palm-coconut blend in turbocharged and non-turbocharged conditions of a diesel engine. Energy Conversion and Management, 90. pp. 111-120. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.11.017.

Arifutzzaman, Abut and Soon, Chin Fhong and Morsin, Marlia and Lim, Gim Pao and Aslfattahi, Navid and Jubadi, Warsuzarina Mat and Sangu, Sangeetha Siva and Saheed, Mohamed Shuaib Mohamed and Nayan, Nafarizal and Saidurj, R. (2022) MXene as emerging low dimensional material in modern energy and bio application: A review. Journal of Nano Research, 74. pp. 109-154. ISSN 1662-5250, DOI https://doi.org/10.4028/p-x49od6.

Arslan, A. and Masjuki, Haji Hassan and Varman, M. and Kalam, M.A. and Quazi, M.M. and Mosarof, M.H. (2016) Effect of change in temperature on the tribological performance of micro surface textured DLC coating. Journal of Materials Research, 31 (13). pp. 1837-1847. ISSN 0884-2914, DOI https://doi.org/10.1557/jmr.2016.12.

Arslan, Ahmed and Quazi, Moinuddin Mohammed and Masjuki, Haji Hassan and Kalam, Md. Abul and Varman, Mahendra and Zulkifli, Nurin Wahidah Mohd and Jamshaid, Muhammad and Mandalan, S.M. and Gohar, Ghulam Abbas and Gulzar, Mubashir and Alwi, Azham and Yarmand, Hooman and Mustafa, Maria S. (2018) Wear characteristics of patterned and un-patterned tetrahedral amorphous carbon film in the presence of synthetic and bio based lubricants. Materials Research Express, 6 (3). 036414. ISSN 2053-1591, DOI https://doi.org/10.1088/2053-1591/aaf74d.

Arzani, H.K. and Amiri, A. and Kazi, S.N. and Badarudin, A. and Chew, B.T. (2016) Heat transfer performance of water-based tetrahydrofurfuryl polyethylene glycol-treated graphene nanoplatelet nanofluids. RSC Advances, 6 (70). pp. 65654-65669. ISSN 2046-2069, DOI https://doi.org/10.1039/c6ra13301k.

Arzani, H.K. and Amiri, A. and Kazi, S.N. and Chew, B.T. and Badarudin, A. (2016) Experimental investigation of thermophysical properties and heat transfer rate of covalently functionalized MWCNT in an annular heat exchanger. International Communications in Heat and Mass Transfer, 75. pp. 67-77. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2016.03.015.

Asadi-Eydivand, M. and Solati-Hashjin, M. and Fathi, A. and Padashi, M. and Abu Osman, Noor Azuan (2016) Optimal design of a 3D-printed scaffold using intelligent evolutionary algorithms. Applied Soft Computing, 39. pp. 36-47. ISSN 1568-4946, DOI https://doi.org/10.1016/j.asoc.2015.11.011.

Asadsangabifard, Mohammadjavad and Ismail, Zubaidah and Yusop, Zulkifli and Ong, Zhi Chao and Mohd, Nuruol Syuhadaa and Roushenas, Peiman and Tam, Jun Hui (2018) Temporal and spatial variation of grey water (sullage) properties from commercial and residential catchments. Desalination and Water Treatment, 132. pp. 188-196. ISSN 1944-3994, DOI https://doi.org/10.5004/dwt.2018.23017.

Ashrafi, Negin and Ariff, Azmah Hanim Mohamed and Sarraf, Masoud and Sulaiman, Shamsuddin and Hong, Tang Sai (2021) Microstructural, thermal, electrical, and magnetic properties of optimized Fe3O4-SiC hybrid nano filler reinforced aluminium matrix composite. Materials Chemistry and Physics, 258. ISSN 0254-0584, DOI https://doi.org/10.1016/j.matchemphys.2020.123895.

Ashraful, A.M. and Masjuki, Haji Hassan and Kalam, M.A. and Rashedul, H.K. and Habibullah, M. and Rashed, M.M. and Mosarof, M.H. and Arslan, A. (2016) Impact of edible and non-edible biodiesel fuel properties and engine operation condition on the performance and emission characteristics of unmodified DI diesel engine. Biofuels, 7 (3). pp. 219-232. ISSN 1759-7269, DOI https://doi.org/10.1080/17597269.2015.1132365.

Ashrafur Rahman, S.M. and Masjuki, Haji Hassan and Kalam, M.A. and Varman, Mahendra and Sanjid, A. and Abedin, M.J. (2014) Assessing effect of idling on compression ignition engine operated with palm, jatropha and calophyllum biodiesel blends. Journal of the Institute of Industrial Applications Engineers, 2 (3). pp. 122-126. ISSN 2187-8811,

Ashrafuzzaman, Md. and Al-Maruf, A. and Mahbubul, I.M. and Malek, A.B.M.A. and Mukaddes, A.M.M. (2016) Quality function deployment approach to measure supply chain performance: A case study on garments accessories industries. International Journal of Industrial and Systems Engineering (IJISE), 22 (1). pp. 96-120. ISSN 1748-5037,

Asikin-Mijan, Nurul and Lee, Hwei Voon and Juan, Joon Ching and Abd Rahman, Noorsaadah and Ong, Hwai Chyuan and Razali, S.M. and Taufiq-Yap, Yun Hin (2018) Promoting deoxygenation of triglycerides via Co-Ca loaded SiO 2 -Al 2 O 3 catalyst. Applied Catalysis A: General, 552. pp. 38-48. ISSN 0926-860X, DOI https://doi.org/10.1016/j.apcata.2017.12.020.

Askari, E. and Mehrali, Mehdi and Metselaar, I.H.S.C. and Kadri, Nahrizul Adib and Rahman, Md Moshiur (2012) Fabrication and mechanical properties of Al2O3/SiC/ZrO2 functionally graded material by electrophoretic deposition. Journal of the Mechanical Behavior of Biomedical Materials, 12. pp. 144-150. ISSN 1751-6161, DOI https://doi.org/10.1016/j.jmbbm.2012.02.029.

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Chai, Wen Lin and Ngeow, Wei Cheong and Nawi, M.K.A. (2016) Investigation of Boron Addition on Densification and Cytotoxicity of Powder Injection Molded 316L Stainless Steel Dental Materials. Arabian Journal for Science and Engineering, 41 (11). pp. 4669-4681. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-016-2224-1.

Aslani, N. and Noroozi, S. and Khoo, S.Y. and Ong, Z.C. and Maggs, C. (2016) Simulation of gait asymmetry and energy transfer efficiency between unilateral and bilateral amputees. Sports Engineering, 19 (3). pp. 163-170. ISSN 1369-7072, DOI https://doi.org/10.1007/s12283-016-0202-1.

Aslfattahi, Navid and Saidur, R. and Arifutzzaman, A. and Sadri, R. and Bimbo, Nuno and Sabri, Mohd Faizul Mohd and Maughan, Philip A. and Bouscarrat, Luc and Dawson, Richard J. and Said, Suhana Mohd and Goh, Boon Tong and Sidik, Nor Azwadi Che (2020) Experimental investigation of energy storage properties and thermal conductivity of a novel organic phase change material/MXene as A new class of nanocomposites. Journal of Energy Storage, 27. ISSN 2352-152X, DOI https://doi.org/10.1016/j.est.2019.101115.

Aslian, A. and Asli, B.H.S. and Tan, Chin Joo and Adikan, Faisal Rafiq Mahamd and Toloei, A. (2016) Design and Analysis of an Optical Coupler for Concentrated Solar Light Using Optical Fibers in Residential Buildings. International Journal of Photoenergy, 2016. pp. 1-11. ISSN 1110-662X, DOI https://doi.org/10.1155/2016/3176052.

Asmadi, M. S. and Md. Kasmani, Ruhaila and Siri, Z. and Saleh, H. (2022) Galerkin finite element analysis of buoyancy-driven heat transfer of Water-Based CU-AL(2)O(3) hybrid nanofluid inside a U-shaped enclosure with localized heat. Journal of Enhanced Heat Transfer, 29 (2). pp. 1-26. ISSN 1065-5131,

Asmadi, M. S. and Md. Kasmani, Ruhaila and Siri, Zailan and Saleh, H. (2022) Thermal enhancement effects of buoyancy-driven heat transfer of hybrid nanofluid confined in a tilted u-shaped cavity. Journal of Applied Fluid Mechanics, 15 (2). pp. 337-348. ISSN 1735-3572, DOI https://doi.org/10.47176/jafm.15.02.32920.

Asqool, Obada and Koting, Suhana and Saifizul, Ahmad Abdullah (2021) Evaluation of Outlier Filtering Algorithms for Accurate Travel Time Measurement Incorporating Lane-Splitting Situations. Sustainability, 13 (24). p. 13851. ISSN 2071-1050, DOI https://doi.org/10.3390/su132413851.

Atabani, A.E. and Badruddin, I.A. and Masjuki, Haji Hassan and Chong, W.T. and Lee, K.T. (2015) Pangium edule reinw: A promising non-edible oil feedstock for biodiesel production. Arabian Journal for Science and Engineering, 40 (2). pp. 583-594. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-014-1452-5.

Atabani, A.E. and Rahman, S. and Silitonga, A.S. and Sebayang, A.H. (2011) Energy Economical and Environmental Analysis of Industrial Boilers Using Fuel Switching. International Journal on Advanced Science, Engineering and Information Technology, 1 (5). pp. 501-506. ISSN 978-983-42366-4-9,

Atabani, A.E. and Saidur, Rahman and Silitonga, A.S. and Mahlia, T.M.I. (2012) Energy economical and environmental analysis of industrial boilers using VSD. Applied Mechanics and Materials, 110. pp. 3223-3233. ISSN 3037852623, DOI https://doi.org/10.4028/www.scientific.net/AMM.110-116.3223.

Atan, Mohd Farid and Hussain, Mohd Azlan and Shamiri, Ahmad (2021) The influence of catalyst flow rate and superficial gas velocity on the modified two-phase model for propylene polymerization in a gas-phase fluidized bed reactor. Canadian Journal of Chemical Engineering, 99 (8). pp. 1745-1757. ISSN 0008-4034, DOI https://doi.org/10.1002/cjce.24021.

Athani, Abdulgaphur and Nik Ghazali, Nik Nazri and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Ahmed, N. J. Salman and Honnutagi, Abdulrazak (2023) Visualization of multiphase pulsatile blood over single phase blood flow in a patient specific stenosed left coronary artery using image processing technique. Bio-Medical Materials and Engineering, 34 (1). pp. 13-35. ISSN 0959-2989, DOI https://doi.org/10.3233/BME-211333.

Auliya, Rahmat Zaki and Soh, Arn Er and Gan, Wee Chen and Wong, Yew Hoong and Mohammad Haniff, Muhammad Aniq Shazni and Mohd Razip Wee, M. F. and Sadri, Rad and Aslfattahi, Navid and Fatima, Noshin and Othman, Masuri and Dee, Chang Fu and Ooi, Poh Choon (2023) Influence of bistacked polyvinylidene fluoride-2D Ti3C2Tx MXene nanocomposite concentration for solution-processed piezoelectric nanogenerators. Journal of Materials Science-Materials in Electronics, 34 (9). ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-023-10213-3.

Auwal, S.T. and Ramesh, Singh and Yusof, Farazila and Manladan, Sunusi Marwana (2018) A review on laser beam welding of copper alloys. The International Journal of Advanced Manufacturing Technology, 96 (1-4). pp. 475-490. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-017-1566-5.

Auwal, S.T. and Ramesh, Singh and Yusof, Farazila and Manladan, Sunusi Marwana (2018) A review on laser beam welding of titanium alloys. The International Journal of Advanced Manufacturing Technology, 97 (1-4). pp. 1071-1098. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-018-2030-x.

Auwal, S.T. and Ramesh, Singh and Zhang, Zequn and Liu, Jinge and Tan, Caiwang and Manladan, Sunusi Marwana and Yusof, Farazila and Tarlochan, Faris (2019) Influence of electrodeposited Cu-Ni layer on interfacial reaction and mechanical properties of laser welded-brazed Mg/Ti lap joints. Journal of Manufacturing Processes, 37. pp. 251-265. ISSN 1526-6125, DOI https://doi.org/10.1016/j.jmapro.2018.11.029.

Awang, Muhamad S. N. and Mohd Zulkifli, Nurin Wahidah and Abbas, Muhammad M. and Zulkifli, Syahir A. and Yusoff, Mohd N. A. M. and Ahmad, Muhammad H. and Lokman NolHakim, Muhammad A. H. and Wan Daud, Wan Mohd Ashri (2022) Effect of addition of plastic pyrolytic oil and waste cooking oil biodiesel in palm oil biodiesel-commercial diesel blends on diesel engine performance, emission, and lubricity. Energy & Environment, 33 (6). pp. 1061-1089. ISSN 0958-305X, DOI https://doi.org/10.1177/0958305X211034822.

Awang, Muhamad Sharul Nizam and Mohd Zulkifli, Nurin Wahidah and Abbas, Muhammad Mujtaba and Zulkifli, Syahir Amzar and Mohd Yusoff, Mohd Nur Ashraf and Ahmad, Muhammad Hazwan and Wan Daud, Wan Mohd Ashri (2020) Effect of blending local plastic pyrolytic oil with diesel on lubricity. Jurnal Tribologi, 27. pp. 143-157. ISSN 2289-7232,

Awang, Muhamad Sharul Nizam and Zulkifli, Nurin Wahidah Mohd and Abbas, Muhammad Mujtaba and Zulkifli, Muhammad Syahir Amzar and Abul Kalam, Md and Yusoff, Mohd Nur Ashraf Mohd and Ahmad, Muhammad Hazwan and Daud, Wan Mohd Ashri Wan (2022) Effect of plastic pyrolytic oil and waste cooking biodiesel on tribological properties of palm biodiesel-diesel fuel blends. Industrial Lubrication and Tribology, 74 (8, SI). pp. 932-942. ISSN 0036-8792, DOI https://doi.org/10.1108/ILT-08-2021-0338.

Awang, Muhamad Sharul Nizam and Zulkifli, Nurin Wahidah Mohd and Abbas, Muhammad Mujtaba and Zulkifli, Syahir Amzar and Abul Kalam, Md and Ahmad, Muhammad Hazwan and Yusoff, Mohd Nur Ashraf Mohd and Mazlan, Mazrina and Daud, Wan Mohd Ashri Wan (2021) Effect of addition of palm oil biodiesel in waste plastic oil on diesel engine performance, emission, and lubricity. ACS Omega, 6 (33). pp. 21655-21675. ISSN 2470-1343, DOI https://doi.org/10.1021/acsomega.1c03073.

Awang, Muhamad Sharul Nizam and Zulkifli, Nurin Wahidah Mohd and Kalam, Abul and Abbas, Muhammad Mujtaba and Ahmad, Muhammad Hazwan and Zulkifli, Syahir Amzar and Yusoff, Mohd Nur Ashraf Mohd and Daud, Wan Mohd Ashri Wan and Ambarwati, Neneng Siti Silfi and Abdullah, Rose Fadzilah (2021) Carbon nanotube as effective enhancer for performance and emission of diesel engine fueled with waste plastic pyrolytic oil-diesel blend and its combination with titanium oxide nanoparticle. Jurnal Tribologi, 31. pp. 97-114. ISSN 2289-7232,

Awang, Muhamad Sharul Nizam and Zulkifli, Nurin Wahidah Mohd and Mujtaba, M.A. and Zulkifli, Muhammad Syahir Amzar and Kalam, Md. Abul and Mohd Yusoff, Mohd Nur Ashraf and Ahmad, Muhammad Hazwan and Wan Daud, Wan Mohd Ashri (2022) Effect of plastic pyrolytic oil and waste cooking biodiesel on tribological properties of palm biodiesel-diesel fuel blends. Industrial Lubrication and Tribology. ISSN 0036-8792, DOI https://doi.org/10.1108/ILT-08-2021-0338.

Azeem, - and Badruddin, I.A. and Nik-Ghazali, Nik Nazri and Idris, Mohd Yamani Idna and Anqi, Ali E. and Ahmed, Salman N.J. and Kamangar, Sarfaraz and Al-Rashed, Abdullah A.A.A. (2018) Effect of size and location of solid on conjugate heat transfer in porous cavity. Indian Journal of Pure and Applied Physics, 56 (10). pp. 792-801. ISSN 0019-5596,

Azeem, - and Badruddin, Irfan Anjum and Idris, Mohd Yamani Idna and Nik-Ghazali, Nik Nazri and Salman Ahmed, N.J. and Al-Rashed, A.A.A.A. (2016) Conjugate heat and mass transfer in square porous cavity. Indian Journal of Pure and Applied Physics, 54 (12). pp. 777-786. ISSN 0019-5596,

Azeem, Waqar and Shahzad, Muhammad Khuram and Wong, Yew Hoong (2024) Rubidium zinc trioxide perovskite materials for photovoltaic solar cell applications: A first principle calculations. Heliyon, 10 (1). ISSN 2405-8440, DOI https://doi.org/10.1016/j.heliyon.2023.e23818.

Azeem, Waqar and Shahzad, Muhammad Khuram and Wong, Yew Hoong and Tirth, Vineet (2024) A DFT study of structural, electronic, optical, thermal and mechanical properties of cubic perovskite KGeX3 (X = Cl, Br) compound for solar cell applications. Physica Scripta, 99 (3). 035922. ISSN 0031-8949, DOI https://doi.org/10.1088/1402-4896/ad1737.

Aziz, N.A.M. and Yunus, R. and Rashid, U. and Zulkifli, Nurin Wahidah Mohd (2016) Temperature effect on tribological properties of polyol ester-based environmentally adapted lubricant. Tribology International, 93 (Part A). pp. 43-49. ISSN 0301-679X, DOI https://doi.org/10.1016/j.triboint.2015.09.014.

Aziz, Shujahadeen B. and Asnawi, Ahmad S. F. M. and Mohammed, Pshko A. and Abdulwahid, Rebar T. and Yusof, Yuhanees M. and Abdullah, Ranjdar M. and Kadir, M. F. Z. (2021) Impedance, circuit simulation, transport properties and energy storage behavior of plasticized lithium ion conducting chitosan based polymer electrolytes. Polymer Testing, 101. ISSN 0142-9418, DOI https://doi.org/10.1016/j.polymertesting.2021.107286.

Azman, S.S.N. and Zulkifli, Nurin Wahidah Mohd and Masjuki, Haji Hassan and Gulzar, M. and Zahid, R. (2016) Study of tribological properties of lubricating oil blend added with graphene nanoplatelets. Journal of Materials Research, 31 (13). pp. 1932-1938. ISSN 0884-2914, DOI https://doi.org/10.1557/jmr.2016.24.

Azmer, Mohamad Izzat and Zafar, Qayyum and Qadir, Karwan Wasman and Sulaiman, Khaulah and Bawazeer, Tahani M. and Alsoufi, Mohammad S. (2018) Organic humidity sensing film optimization by embedding inorganic nano-anatase TiO2 powder. Applied Physics A, 124 (7). p. 508. ISSN 0947-8396, DOI https://doi.org/10.1007/s00339-018-1924-7.

Azzi, O. and Hacene, F. Boukli and Ferouani, Abdel Karim and Ouahrani, Tarik and Reshak, Ali Hussain (2019) Electronic, bonding and optical properties of the LiGaGe2X6 (X = S, Se, and Te) compounds: An ab initio study. Optik, 180. pp. 782-791. ISSN 0030-4026, DOI https://doi.org/10.1016/j.ijleo.2018.11.127.

Badiuzaman, Wan Nur Izzati Wan and Sayuti, Mohd and Derahman, Nur Aqilah and Amran, Nor Amirah Mohd and Isa, M.A. Mohd (2018) Analysation of performances of CNC high speed milling machine using multi-walled carbon nanotubes as additives in cutting fluid. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 494-499. ISSN 0933-5137, DOI https://doi.org/10.1002/mawe.201800028.

Bagheri, S. and Jamal, N. and Halilu, A. and TermehYousefi, A. (2018) Novel rGO-T-C(n) Nanosheets developed via click chemistry as a lubricant anti-wear additive. Scientific Reports, 8 (1). pp. 1-9. ISSN 2045-2322, DOI https://doi.org/10.1038/s41598-018-23898-y.

Baghlani, V. and Mehbudi, P. and Akbari, J. and Nezhad, E.Z. and Sarhan, A.A.D. and Hamouda, A.M.S. (2016) An optimization technique on ultrasonic and cutting parameters for drilling and deep drilling of nickel-based high-strength Inconel 738LC superalloy with deeper and higher hole quality. The International Journal of Advanced Manufacturing Technology, 82 (5-8). pp. 877-888. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-015-7414-6.

Bahador, A. and Saud, S.N. and Hamzah, E. and Abubakar, T. and Yusof, F. and Ibrahim, M.K. (2016) Nd:YAG laser welding of Ti-27 at.% Nb shape memory alloys. Welding in the World, 60 (6). pp. 1133-1139. ISSN 0043-2288, DOI https://doi.org/10.1007/s40194-016-0375-z.

Bahador, Abdollah and Hamzah, Esah and Kondoh, Katsuyoshi and Asma Abubakar, Tuty and Yusof, Farazila and Umeda, Junko and Saud, Safaa N. and Ibrahim, Mustafa K. (2018) Microstructure and superelastic properties of free forged Ti–Ni shape-memory alloy. Transactions of Nonferrous Metals Society of China, 28 (3). pp. 502-514. ISSN 1003-6326, DOI https://doi.org/10.1016/S1003-6326(18)64683-7.

Bahador, Abdollah and Hamzah, Esah and Kondoh, Katsuyoshi and Tsutsumi, Seiichiro and Umeda, Junko and Abu Bakar, Tuty Asma and Yusof, Farazila (2018) Heat-Conduction-Type and Keyhole-Type Laser Welding of Ti–Ni Shape-Memory Alloys Processed by Spark-Plasma Sintering. Materials transactions, 59 (5). pp. 835-842. ISSN 1347-5320, DOI https://doi.org/10.2320/matertrans.M2017387.

Bahador, Abdollah and Umeda, Junko and Hamzah, Esah and Yusof, Farazila and Li, Xiaochun and Kondoh, Katsuyoshi (2020) Synergistic strengthening mechanisms of copper matrix composites with TiO2 nanoparticles. Materials Science and Engineering: A, 772. p. 138797. ISSN 0921-5093, DOI https://doi.org/10.1016/j.msea.2019.138797.

Bahador, Abdollah and Umeda, Junko and Mizutani, Masami and Hamzah, Esah and Yusof, Farazila and Kondoh, Katsuyoshi (2020) High-Brightness and High-Power Laser Welding of Powder Metallurgy Shape Memory Alloy: Welding-Parameter-Dependent Microstructure. Journal of Materials Engineering and Performance, 29 (2). pp. 987-996. ISSN 1059-9495, DOI https://doi.org/10.1007/s11665-020-04597-0.

Baharuddin, A.A. and Ang, B.C. and Wong, Y.H. (2017) Self-assembly and electrical characteristics of 4-pentynoic acid functionalized Fe3O4-γ-Fe2O3 nanoparticles on SiO2/n-Si. Applied Surface Science, 423. pp. 236-244. ISSN 0169-4332, DOI DOI: 10.1016/j.apsusc.2017.06.155.

Baharuddin, Aainaa Aqilah and Ang, Bee Chin and Abu Hussein, Nurul Athirah and Andriyana, Andri and Wong, Yew Hoong (2018) Mechanisms of highly stabilized ex-situ oleic acid-modified iron oxide nanoparticles functionalized with 4-pentynoic acid. Materials Chemistry and Physics, 203. pp. 212-222. ISSN 0254-0584, DOI https://doi.org/10.1016/j.matchemphys.2017.09.051.

Baharuddin, Aainaa Aqilah and Ang, Bee Chin and Haseeb, A. S. M. A. and Wong, Yew Hoong (2021) Improvement of N-ZnO chemiresistive gas sensor toward lower detection limit of acetone and ethanol at low operating temperature. Materials Letters, 303. ISSN 0167-577X, DOI https://doi.org/10.1016/j.matlet.2021.130562.

Baharuddin, Aainaa Aqilah and Ang, Bee Chin and Haseeb, A. S. M. A. and Wong, Yew Hoong (2024) Low operating temperature N-ZnO/PANI chemiresistive acetone gas sensor. Journal of Materials Science-Materials in Electronics, 35 (1). ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-023-11827-3.

Bahrami-Karkevandi, Mojtaba and Nasiri-Tabrizi, Bahman and Wong, K.Y. and Ebrahimi-Kahrizsangi, Reza and Fallahpour, Alireza and Saber-Samandari, Saeed and Baradaran, Saeid and Basirun, Wan Jefrey (2019) Mechanochemistry approach to produce in-situ tungsten borides and carbides nanopowders: Experimental study and modeling. Materials Chemistry and Physics, 224. pp. 47-64. ISSN 0254-0584, DOI https://doi.org/10.1016/j.matchemphys.2018.12.003.

Bai, S. and Amirruddin, A.K. and Pandey, A.K. and Samykano, M. and Ahmad, Muhammad Shakeel and Sharma, K. and Tyagi, V.V. (2021) Advancements in the development of various types of dye-sensitized solar cells: A comparative review. Energy Engineering: Journal of the Association of Energy Engineering, 118 (4). pp. 737-759. ISSN 0199-8595, DOI https://doi.org/10.32604/EE.2021.016157.

Bai, Yu and Suhatril, Meldi and Cao, Yan and Forooghi, Ali and Assilzadeh, Hamid (2022) Hygro-thermo-magnetically induced vibration of nanobeams with simultaneous axial and spinning motions based on nonlocal strain gradient theory. Engineering with Computers, 38 (3). pp. 2509-2526. ISSN 0177-0667, DOI https://doi.org/10.1007/s00366-020-01218-1.

Balu, S. and Sampath, P. S. and Bhuvaneshwaran, M. and Chandrasekar, G. and Karthik, A. and Sagadevan, Suresh (2020) Dynamic mechanical analysis and thermal analysis of untreated Coccinia indica fiber composites. Polimery, 65 (5). pp. 357-362. ISSN 0032-2725, DOI https://doi.org/10.14314/polimery.2020.5.3.

Ban, Cheah Chee and Ee, Tan Leng and Ramli, Mahyuddin and Md Akil, Hazizan and Mo, Kim Hung (2022) Properties and microstructure of lime kiln dust activated slag-fly ash mortar. Construction and Building Materials, 347. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2022.128518.

Bang, L.T. and Long, B.D. and Othman, R. (2014) Carbonate Hydroxyapatite and Silicon-Substituted Carbonate Hydroxyapatite: Synthesis, Mechanical Properties, and Solubility Evaluations. Scientific World Journal, 2014. pp. 1-9. ISSN 2356-6140, DOI https://doi.org/10.1155/2014/969876.

Baradaran, S. and Moghaddam, E. and Nasiri-Tabrizi, B. and Basirun, Wan Jefrey and Mehrali, M. and Sookhakian, M. and Hamdi, M. and Alias, Y. (2015) Characterization of nickel-doped biphasic calcium phosphate/graphene nanoplatelet composites for biomedical application. Materials Science and Engineering: C, 49. pp. 656-668. ISSN 0928-4931, DOI https://doi.org/10.1016/j.msec.2015.01.050.

Baradaran, Saeid and Nasiri-Tabrizi, Bahman and Seyed Shirazi, Seyed Farid and Saber-Samandari, Saeed and Shahtalebi, S. and Basirun, Wan Jefrey (2018) Wet chemistry approach to the preparation of tantalum-doped hydroxyapatite: Dopant content effects. Ceramics International, 44 (3). pp. 2768-2781. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2017.11.016.

Baradaran, Saied and Basirun, Wan Jefrey and Mahmoudian, Mohammad Reza and Abd Shukor, Mohd Hamdi and Alias, Yatimah (2013) Synthesis and characterization of monetite prepared using a sonochemical method in a mixed solvent system of Water/Ethylene Glycol/N, N-Dimethylformamide. Metallurgical and Materials Transactions A, 44 (5). pp. 2331-2338. ISSN 1073-5623, DOI https://doi.org/10.1007/s11661-012-1595-5.

Barma, M.C. and Long, B.D. and Sabri, Mohd Faizul Mohd and Ramesh, Singh and Saidur, R. and Said, Suhana Mohd and Kimura, K. and Hai, N.H. and Huy, T.D. and Trung, T.B. (2016) Synthesis of Cu3.21Bi4.79S9 bismuth chalcogenide by mechanical alloying. Powder Technology, 294. pp. 348-352. ISSN 0032-5910, DOI https://doi.org/10.1016/j.powtec.2016.03.002.

Barma, M.C. and Saidur, Rahman and Rahman, S.M.A. and Allouhi, E. and Akash, B.A. and Sait, S.M. (2017) A review on boilers energy use, energy savings, and emissions reductions. Renewable and Sustainable Energy Reviews, 79. pp. 970-983. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2017.05.187.

Barrinaya, Muhammad Akbar and Alfiyuranda, Muhammad Nayomi and Ramezani, Mohammadkasem and Putra, Ichsan Setya and Ramesh, Singh and Kadarno, Purwo and Hastuty, Sri and Purbolaksono, Judha (2022) Modes I-II-III stress intensity factors of a semi-elliptical surface crack at a round bar under torsion loading by FEM and DBEM. Engineering Solid Mechanics, 10 (4). 399 – 406. ISSN 22918744, DOI https://doi.org/10.5267/j.esm.2022.6.099.

Barua, Prabal Datta and Baygin, Nursena and Dogan, Sengul and Baygin, Mehmet and Arunkumar, N. and Fujita, Hamido and Tuncer, Turker and Tan, Ru-San and Palmer, Elizabeth and Bin Azizan, Muhammad Mokhzaini and Kadri, Nahrizul Adib and Acharya, U. Rajendra (2022) Automated detection of pain levels using deep feature extraction from shutter blinds-based dynamic-sized horizontal patches with facial images. Scientific Reports, 12 (1). ISSN 2045-2322, DOI https://doi.org/10.1038/s41598-022-21380-4.

Barzani, M.M. and Sarhan, A.A.D. and Farahany, S. and Ramesh, S. and Maher, I. (2015) Investigating the Machinability of Al-Si-Cu cast alloy containing bismuth and antimony using coated carbide insert. Measurement, 62. pp. 170-178. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2014.10.030.

Barzani, M.M. and Zalnezhad, E. and Sarhan, A.A.D. and Farahany, S. and Ramesh, S. (2015) Fuzzy logic based model for predicting surface roughness of machined Al-Si-Cu-Fe die casting alloy using different additives-turning. Measurement, 61. pp. 150-161. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2014.10.003.

Basha, J. Sadhik and Al Balushi, Montaha and Soudagar, Manzoore Elahi M. and Safaei, Mohammad Reza and Mujtaba, M. A. and Khan, T. M. Yunus and Hossain, Nazia and Elfasakhany, Ashraf (2022) Applications of nano-additives in internal combustion engines: A critical review. Journal of Thermal Analysis and Calorimetry, 147 (17). pp. 9383-9403. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-022-11199-6.

Basha, J. Sadhik and Jafary, Tahereh and Vasudevan, Ranjit and Bahadur, Jahanzeb Khan and Al Ajmi, Muna and Al Neyadi, Aadil and Soudagar, Manzoore Elahi M. and Mujtaba, Muhammad Abbas and Hussain, Abrar and Ahmed, Waqar and Shahapurkar, Kiran and Rahman, S. M. Ashrafur and Fattah, Islam Md Rizwanul (2021) Potential of utilization of renewable energy technologies in Gulf Countries. Sustainability, 13 (18). ISSN 2071-1050, DOI https://doi.org/10.3390/su131810261.

Bashir, M. Nasir and Haseeb, A. S. M. A. (2022) Grain size stability of interfacial intermetallic compound in Ni and Co nanoparticle-doped SAC305 solder joints under electromigration. Journal of Materials Science: Materials in Electronics, 33 (17). pp. 14240-14248. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-022-08352-0.

Bashir, M. Nasir and Haseeb, A. S. Md Abdul and Wakeel, Saif and Khan, Muhammad Ali and Quazi, M. M. and Khan, Niaz Bahadur and Ahmed, Arslan and Soudagar, Manzoore Elahi M. (2022) Effect of Ni and Co nanoparticle-doped flux on microstructure of SAC305 solder matrix. Journal of Materials Science-Materials in Electronics, 33 (25). pp. 20106-20120. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-022-08827-0.

Bashir, M. Nasir and Khan, Niaz Bahadur and Bashir, Shahid and Khan, Abdul Faheem and Quazi, M. M. and Gul, Mustabshirha and Wakeel, Saif and Saad, Hafiz Muhammad (2023) Effect of Zn nanoparticle-doped flux on mechanical properties of SAC305 solder joint after electromigration. Journal of Materials Science-Materials in Electronics, 34 (4). ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-022-09722-4.

Bashir, M. Nasir and Saad, Hafiz Muhammad and Rizwan, Muhammad and Bingol, Sedat and Channa, Iftikhar Ahmed and Gul, Mustabshirha and Haseeb, A. S. Md Abdul and Naher, Sumsun (2022) Effect of cobalt nanoparticles on mechanical properties of Sn-58Bi solder joint. Journal of Materials Science-Materials in Electronics, 33 (28). pp. 22573-22579. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-022-09035-6.

Bashir, M. Nasir and Saad, Hafiz Muhammad and Rizwan, Muhammad and Quazi, Moinuddin Mohammed and Ali, Muhammad Mahmood and Ahmed, Arslan and Zaidi, Asad A. and Soudagar, Manzoore Elahi M. and Haseeb, A. S. Md Abdul and Naher, Sumsun (2022) Effects of tin particles addition on structural and mechanical properties of eutectic Sn-58Bi solder joint. Journal of Materials Science-Materials in Electronics, 33 (28). pp. 22499-22507. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-022-09028-5.

Bashir, M.N. and Haseeb, A.S. Md. Abdul and Rahman, A.Z.M.S. and Fazal, M.A. (2016) Effect of Cobalt Doping on the Microstructure and Tensile Properties of Lead Free Solder Joint Subjected to Electromigration. Journal of Materials Science and Technology, 32 (11). pp. 1129-1136. ISSN 1005-0302, DOI https://doi.org/10.1016/j.jmst.2016.09.007.

Bashir, Mohamed Bashir Ali and Said, Suhana Mohd and Sabri, Mohd Faizul Mohd and Miyazaki, Yuzuru and Shnawah, Dhafer Abdulameer and Shimada, Masanori and Salleh, Faiz and Mahmood, Mohamad Syafie and Salih, Ethar Yahya and Fitriani, Fitriani and Elsheikh, Mohamed Hamid (2018) In-Filled La0.5Co4Sb12 Skutterudite System with High Thermoelectric Figure of Merit. Journal of Electronic Materials, 47 (4). pp. 2429-2438. ISSN 0361-5235, DOI https://doi.org/10.1007/s11664-018-6074-3.

Bashir, Mohamed Bashir Ali and Salih, Ethar Yahya and Rajpar, Altaf Hussain and Bahmanrokh, Ghazaleh and Mohd Sabri, Mohd Faizul (2022) The impact of laser energy on the photoresponsive characteristics of CdO/Si visible light photodetector. Journal of Micromechanics and Microengineering, 32 (8). ISSN 0960-1317, DOI https://doi.org/10.1088/1361-6439/ac7d93.

Bashir, Muhammad Nasir and Butt, Sajid Ullah and Mansoor, Muhammad Adil and Khan, Niaz Bahadur and Bashir, Shahid and Wong, Yew Hoong and Alamro, Turki and Eldin, Sayed Mohamed and Jameel, Mohammed (2022) Role of crystallographic orientation of β-sn grain on electromigration failures in lead-free solder joint: An overview. Coatings, 12 (11). ISSN 2079-6412, DOI https://doi.org/10.3390/coatings12111752.

Bashir, Muhammad Nasir and Haseeb, A. S. M. A. and Naher, Sumsun and Ali, Muhammad Mahmood and Bashir, Mohamed Bashir Ali and Zaidi, Asad A. A. and Jamshaid, Muhammad and Javed, Iqra (2023) Effects of cobalt nanoparticle on microstructure of Sn58Bi solder joint. Journal of Materials Science-Materials in Electronics, 34 (4). ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-022-09465-2.

Bashir, Muhammad Nasir and Haseeb, A.S. Md. Abdul (2018) Improving mechanical and electrical properties of Cu/SAC305/Cu solder joints under electromigration by using Ni nanoparticles doped flux. Journal of Materials Science: Materials in Electronics, 29 (4). pp. 3182-3188. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-017-8252-0.

Bashir, Shahid and Hina, Maryam and Iqbal, Javed and Jafer, Rashida and Ramesh, Subramaniam and Ramesh, Kasi (2022) Self-healable poly (N, N-dimethylacrylamide)/poly (3,4-ethylenedioxythiophene) polystyrene sulfonate composite hydrogel electrolytes for aqueous supercapacitors. Journal of Energy Storage, 45. ISSN 2352-152X, DOI https://doi.org/10.1016/j.est.2021.103760.

Bashirnezhad, K. and Bazri, S. and Safaei, M.R. and Goodarzi, M. and Dahari, M. and Mahian, O. and Dalkiliça, A.S. and Wongwises, S. (2016) Viscosity of nanofluids: A review of recent experimental studies. International Communications in Heat and Mass Transfer, 73. pp. 114-123. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2016.02.005.

Basso, Alessio and Hamad, F.A. and Ganesan, Poo Balan (2018) Effects of the geometrical configuration of air–water mixer on the size and distribution of microbubbles in aeration systems. Asia-Pacific Journal of Chemical Engineering, 13 (6). e2259. ISSN 1932-2135, DOI https://doi.org/10.1002/apj.2259.

Bayrami, Abolfazl and Shirdel, Arezoo and Pouran, Shima Rahim and Mahmoudi, Fariba and Habibi-Yangjeh, Aziz and Singh, Ramesh and Raman, Abdul Aziz Abdul (2020) Co-regulative effects of chitosan-fennel seed extract system on the hormonal and biochemical factors involved in the polycystic ovarian syndrome. Materials Science and Engineering C, 117. ISSN 09284931, DOI https://doi.org/10.1016/j.msec.2020.111351.

Bazri, Shahab and Badruddin, Irfan Anjum and Naghavi, Mohammad Sajad and Bahiraei, Mehdi (2018) A review of numerical studies on solar collectors integrated with latent heat storage systems employing fins or nanoparticles. Renewable Energy, 118. pp. 761-778. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2017.11.030.

Behroyan, I. and Vanaki, S. and Ganesan, Poo Balan and Saidur, R. (2016) A comprehensive comparison of various CFD models for convective heat transfer of Al2O3 nanofluid inside a heated tube. International Communications in Heat and Mass Transfer, 70. pp. 27-37. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2015.11.001.

Behroyan, Iman and Ganesan, Poo Balan and He, Shuisheng and Sivasankaran, Sivanandam (2018) CFD models comparative study on nanofluids subcooled flow boiling in a vertical pipe. Numerical Heat Transfer, Part A: Applications, 73 (1). pp. 55-74. ISSN 1040-7782, DOI https://doi.org/10.1080/10407782.2017.1420299.

Berahim, Nawi and Amiri, Iraj Sadegh and Anwar, Toni and Azzuhri, Saaidal Razalli and Mohd Nasir, Mohd Narizee and Zakaria, Rozalina and Chong, Wu Yi and Lai, Choon Kong and Lee, Say Hoe and Ahmad, Harith and Ismail, Mohd Afiq and Yupapin, Preecha Promphan (2019) Polarizing effect of MoSe2-coated optical waveguides. Results in Physics, 12. pp. 7-11. ISSN 2211-3797, DOI https://doi.org/10.1016/j.rinp.2018.11.034.

Berahim, Nurafaliana and Basirun, Wan Jefrey and Leo, Bey Fen and Johan, Mohd Rafie (2018) Synthesis of Bimetallic Gold-Silver (Au-Ag) Nanoparticles for the Catalytic Reduction of 4-Nitrophenol to 4-Aminophenol. Catalysts, 8 (10). p. 412. ISSN 2073-4344, DOI https://doi.org/10.3390/catal8100412.

Besharati, S.R. and Dabbagh, V. and Amini, H. and Sarhan, A.A.D. and Akbari, J. (2015) Nonlinear dynamic analysis of a new antibacklash gear mechanism design for reducing dynamic transmission error. Journal of Mechanical Design, 137 (5). p. 3. ISSN 1050-0472, DOI https://doi.org/10.1115/1.4029582.

Besharati, S.R. and Dabbagh, V. and Amini, H. and Sarhan, Ahmed Aly Diaa Mohammed and Akbari, J. and Abd Shukor, Mohd Hamdi and Ong, Zhi Chao (2016) Multi-objective selection and structural optimization of the gantry in a gantry machine tool for improving static, dynamic, and weight and cost performance. Concurrent Engineering, 24 (1). pp. 83-93. ISSN 1063-293X, DOI https://doi.org/10.1177/1063293X15597047.

Bhatti, J. and Fazal, M.A. and Bushroa, A.R. and Khan, A.F. and Quazi, M.M. (2016) Structural and mechanical properties of (Cr, Ni) N single and gradient layer coatings deposited on mild steel by magnetron sputtering. Tribology: Materials, Surfaces and Interfaces, 10 (3). pp. 117-125. ISSN 1751-5831, DOI https://doi.org/10.1080/17515831.2016.1204106.

Bhatti, J. and Fazal, M.A. and Khan, A.F. and Bushroa, Abdul Razak and Quazi, M.M. (2016) Investigation of the mechanical properties of electrodeposited nickel and magnetron sputtered chromium nitride coatings deposited on mild steel substrate. Journal of Adhesion Science and Technology, 30 (20). pp. 2224-2235. ISSN 0169-4243, DOI https://doi.org/10.1080/01694243.2016.1178027.

Bhuiya, M.M.K. and Ahamed, Jamal Uddin and Chowdhury, M.S.U. and Sarkar, M.A.R. and Salam, B. and Saidur, Rahman and Masjuki, Haji Hassan and Kalam, M.A. (2012) Heat transfer enhancement and development of correlation for turbulent flow through a tube with triple helical tape inserts. International Communications in Heat and Mass Transfer, 39 (1). pp. 94-101. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2011.09.007.

Bhuiya, M.M.K. and Ahamed, Jamal Uddin and Sarkar, M.A.R. and Salam, B. and Masjuki, Haji Hassan and Kalam, M.A. and Saidur, Rahman and Sayem, A.S.M. (2012) Heat transfer and pressure drop characteristics in turbulent flow through a tube. Experimental Heat Transfer, 25 (4). pp. 301-322. ISSN 0891-6152, DOI https://doi.org/10.1080/08916152.2011.623819.

Bhuiyan, M.H.U. and Saidur, R. and Mostafizur, R.M. and Mahbubul, I.M. and Amalina, M.A. (2015) Experimental investigation on surface tension of metal oxide-water nanofluids. International Communications in Heat and Mass Transfer, 65. pp. 82-88. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2015.01.002.

Bhuiyan, M.S.H. and Choudhury, I.A. (2015) Investigation of tool wear and surface finish by analyzing vibration signals in turning assab-705 steel. Machining Science and Technology, 19 (2). pp. 236-261. ISSN 1091-0344, DOI https://doi.org/10.1080/10910344.2015.1018531.

Bhuiyan, M.S.H. and Choudhury, I.A. and Dahari, M. (2015) Development of a control system for artificially rehabilitated limbs: A review. Biological Cybernetics, 109 (2). pp. 141-162. ISSN 0340-1200, DOI https://doi.org/10.1007/s00422-014-0635-1.

Bhuiyan, M.S.H. and Choudhury, I.A. and Dahari, M. and Nukman, Y. (2016) An Investigation into Turning of ASSAB-705 Steel Using Multiple Sensors. Materials and Manufacturing Processes, 31 (7). pp. 896-904. ISSN 1042-6914, DOI https://doi.org/10.1080/10426914.2015.1048358.

Bhuiyan, M.S.H. and Choudhury, I.A. and Dahari, M. and Nukman, Y. and Dawal, S.Z. (2017) An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis. Applied Bionics and Biomechanics, 2017. pp. 1-14. ISSN 1176-2322, DOI https://doi.org/10.1155/2017/7595642.

Bhuiyan, M.S.H. and Choudhury, Imtiaz Ahmed and Dahari, Mahidzal and Nukman, Yusoff and Md Dawal, Siti Zawiah (2016) Application of acoustic emission sensor to investigate the frequency of tool wear and plastic deformation in tool condition monitoring. Measurement, 92. pp. 208-217. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2016.06.006.

Billah, M.M. and Rahman, M.M. and Saidur, Rahman and Hasanuzzaman, M. (2011) Simulation of mhd mixed convection heat transfer enhancement in a double lid-driven obstructed enclosure. International Journal of Mechanical and Materials Engineering, 6 (1). pp. 18-30. ISSN 1823-0334,

Billah, M.M. and Rahman, M.M. and Sharif, U.M. and Rahim, N.A. and Saidur, Rahman and Hasanuzzaman, M. (2011) Numerical analysis of fluid flow due to mixed convection in a lid-driven cavity having a heated circular hollow cylinder. International Communications in Heat and Mass Transfer, 38 (8). pp. 1093-1103. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2011.05.018.

Bin Zahid, Fahad and Ong, Zhi Chao and Khoo, Shin Yee (2020) A review of operational modal analysis techniques for in-service modal identification. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42 (8). ISSN 1678-5878, DOI https://doi.org/10.1007/s40430-020-02470-8.

Bin Zahid, Fahad and Ong, Zhi Chao and Khoo, Shin Yee and Salleh, Mohd Fairuz Mohd (2021) Inertial sensor based human behavior recognition in modal testing using machine learning approach. Measurement Science and Technology, 32 (11). ISSN 0957-0233, DOI https://doi.org/10.1088/1361-6501/ac1612.

Bolzan, A.E. and Haseeb, A.S. Md. Abdul and Schilardi, P.L. and Piatti, Roberto C.V. and Salvarezza, Roberto Carlos and Arvia, Alejandro Jorge (2001) Anodisation of copper in thiourea- and formamidine disulphide-containing acid solution. part I. identification of products and reaction pathway. Journal of Electroanalytical Chemistry, 500 (1-2). pp. 533-542. ISSN 0022-0728, DOI https://doi.org/10.1016/S0022-0728(00)00217-5.

Bonab, R.S. and Rahman, S. (2012) Clean automotive technology: Hydraulic hybrid vehicles (HHVs). Applied Mechanics and Materials, 165. pp. 12-15. ISSN 1662-7482, DOI https://doi.org/10.4028/www.scientific.net/AMM.165.12.

Boopathi, G. and Ragavan, R. and Jaimohan, S.M. and Sagadevan, Suresh and Kim, Ikhyun and Pandurangan, A. and Sivaprakash, P. (2024) Mesoporous graphitic carbon electrodes derived from boat-fruited shells of Sterculia Foetida for symmetric supercapacitors for energy storage applications. Chemosphere, 348. ISSN 0045-6535, DOI https://doi.org/10.1016/j.chemosphere.2023.140650.

Boudouh, Djahida and Hamana, Djamel and Metselaar, Hendrik Simon Cornelis and Achour, Slimane and Chetibi, Loubna and Akhiani, Amir Reza (2021) Low-temperature green route synthesis of fe3o4-c nanocomposite using olive leaves extract. Materials Science and Engineering: B, 271. ISSN 0921-5107, DOI https://doi.org/10.1016/j.mseb.2021.115276.

Boudouh, Djahida and Ikram, Rabia and Mohamed Jan, Badrul and Simon Cornelis Metselaar, Hendrik and Hamana, Djamel and Kenanakis, George (2021) Synthesis, characterization and filtration properties of ecofriendly fe3o4 nanoparticles derived from olive leaves extract. Materials, 14 (15). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14154306.

Bu, Chun Hooi and Lai, Sai Hin and Goh, Xiang Ting and Chong, Wen Tong and Chin, Ren Jie (2021) Influence of filter media depth and vegetation on Faecal Coliform removal by stormwater biofilters. Water and Environment Journal, 35 (1). pp. 181-189. ISSN 1747-6585, DOI https://doi.org/10.1111/wej.12618.

Bushroa, A.R. and Jacob, C. and Saijo, H. and Nishino, S. (2004) Lateral epitaxial overgrowth and reduction in defect density of 3C-SiC on patterned Si substrates. Journal of Crystal Growth, 271 (1-2). pp. 200-206. ISSN 0022-0248, DOI https://doi.org/10.1016/j.jcrysgro.2004.07.061.

Bushroa, A.R. and Ying, C.C. (2008) Plasma Non-Transferred Arc Cladding of Alumina Powder on Mild Steel-Parameters Optimization Using Taguchi Method. Advanced Materials Research, 47-50. pp. 1003-1006. ISSN 1022-6680, DOI https://doi.org/10.4028/www.scientific.net/AMR.47-50.1003.

Bushroa, Abdul Razak and Rahbari, R.G. and Masjuki, Haji Hassan and Muhamad, Muhamad Rasat (2012) Approximation of crystallite size and microstrain via XRD line broadening analysis in TiSiN thin films. Vacuum, 86 (8). pp. 1107-1112. ISSN 0042-207X, DOI https://doi.org/10.1016/j.vacuum.2011.10.011.

Butt, Osama Majeed and Ahmad, Muhammad Shakeel and Che, Hang Seng and Abd Rahim, Nasrudin (2021) Usage of on-demand oxyhydrogen gas as clean/renewable fuel for combustion applications: A review. International Journal of Green Energy, 18 (13). pp. 1405-1429. ISSN 1543-5075, DOI https://doi.org/10.1080/15435075.2021.1904944.

Cai, Yang Chuan and Manladan, Sunusi Marwana and Luo, Zhen (2019) Tribological behaviour of the double FeCoNiCrCux middle-entropy alloy coatings. Surface Engineering, 35 (1). pp. 14-21. ISSN 0267-0844, DOI https://doi.org/10.1080/02670844.2018.1444548.

Cao, Yan and Ayed, Hamdi and Dahari, Mahidzal and Sene, Ndolane and Bouallegue, Belgacem (2022) Using artificial neural network to optimize hydrogen solubility and evaluation of environmental condition effects. International Journal of Low-Carbon Technologies, 17. pp. 80-89. ISSN 1748-1317, DOI https://doi.org/10.1093/ijlct/ctab088.

Cao, Yan and Delpisheh, Mostafa and Yousefiasl, Saeed and Athari, Hassan and El-Shorbagy, M. A. and Jarad, Fahd and Dahari, Mahidzal and Wae-hayee, Makatar (2022) Examination and optimization of a novel auxiliary trigeneration system for a ship through waste-to-energy from its engine. Case Studies in Thermal Engineering, 31. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2022.101860.

Cao, Yan and Mansir, Ibrahim B. and Mouldi, Abir and Gepreel, Khaled A. and Dahari, M. and Le, Tri Hieu and Badran, Mohamed Fathy and Nguyen, Van Nhanh and Wae-hayee, Makatar (2022) Using natural convection mechanism of nanofluid for cooling an embedded hot plate in corner of a square enclosure: A numerical simulation. Case Studies in Thermal Engineering, 33. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2022.101926.

Cao, Yan and Mihardjo, Leonardus W. W. and Dahari, Mahidzal and Mohamed, Abdeliazim Mustafa and Ghaebi, Hadi and Parikhani, Towhid (2021) Assessment of a novel system utilizing gases exhausted from a ship's engine for power, cooling, and desalinated water generation. Applied Thermal Engineering, 184. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2020.116177.

Cao, Yan and Mihardjo, Leonardus W. W. and Dahari, Mahidzal and Tlili, Iskander (2021) Waste heat from a biomass fueled gas turbine for power generation via an ORC or compressor inlet cooling via an absorption refrigeration cycle: A thermoeconomic comparison. Applied Thermal Engineering, 182. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2020.116117.

Ch'ng, S.Y. and Andriyana, A. and Tee, Y.L. and Verron, E. (2015) Effects of carbon black and the presence of static mechanical strain on the swelling of elastomers in solvent. Materials, 8 (3). pp. 884-898. ISSN 1996-1944, DOI https://doi.org/10.3390/Ma8030884.

Chan, X.H. and Khanmirzaei, Mohammad Hassan and Omar, Fatin Saiha and Ramesh, Kasi and Ramesh, Subramaniam and Ramesh, Singh (2018) Enhanced efficiency in dye-sensitized solar cell based on zinc oxide-modified poly(ethylene oxide) gel electrolyte. Ionics, 24 (4). pp. 1221-1226. ISSN 0947-7047, DOI https://doi.org/10.1007/s11581-017-2271-y.

Chandra, Devi and Purbolaksono, Judha and Yusoff, Nukman (2018) Surface crack growth in a solid cylinder under combined cyclic bending-torsion loading. ARPN Journal of Engineering and Applied Sciences, 13 (3). pp. 1033-1041. ISSN 1819-6608,

Chang, L. and Chong, W.T. and Yau, Y.H. and Cui, T. and Wang, X.R. and Pei, F. and Liu, Y.Q. and Pan, S. (2024) An investigation of the PM2.5 concentrations and cumulative inhaled dose during subway commutes in Changchun, China. International Journal of Environmental Science and Technology, 21 (1). 733 – 746. ISSN 1735-1472, DOI https://doi.org/10.1007/s13762-023-04994-7.

Channa, Iftikhar Ahmed and Chandio, Ali Dad and Rizwan, Muhammad and Shah, Aqeel Ahmed and Bhatti, Jahanzeb and Shah, Abdul Karim and Hussain, Fayaz and Shar, Muhammad Ali and AlHazaa, Abdulaziz (2021) Solution processed PVB/mica flake coatings for the encapsulation of organic solar cells. Materials, 14 (10). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14102496.

Chew, C.S. and Durairaj, R. and Haseeb, A.S. Md. Abdul and Beake, B. (2015) Mechanical properties of interfacial phases between Sn-3.5 Ag solder and Ni-18 at. W barrier film by nanoindentation. Soldering & Surface Mount Technology, 27 (2). pp. 90-94. ISSN 0954-0911, DOI https://doi.org/10.1108/Ssmt-01-2015-0001.

Chew, Kit Wayne and Chia, Shir Reen and Show, Pau Loke and Ling, Tau Chuan and Arya, Shalini S. and Chang, Jo-Shu (2018) Food waste compost as an organic nutrient source for the cultivation of Chlorella vulgaris. Bioresource Technology, 267. pp. 356-362. ISSN 0960-8524, DOI https://doi.org/10.1016/j.biortech.2018.07.069.

Chew, Kit Wayne and Chia, Shir Reen and Yap, Yee Jiun and Ling, Tau Chuan and Tao, Yang and Show, Pau Loke (2018) Densification of food waste compost: Effects of moisture content and dairy powder waste additives on pellet quality. Process Safety and Environmental Protection, 116. pp. 780-786. ISSN 0957-5820, DOI https://doi.org/10.1016/j.psep.2018.03.016.

Chia, P.Y. and Haseeb, A.S. Md. Abdul (2015) Intermixing reactions in electrodeposited Cu/Sn and Cu/Ni/Sn multilayer interconnects during room temperature and high temperature aging. Journal of Materials Science: Materials in Electronics, 26 (1). pp. 294-299. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-014-2398-9.

Chia, P.Y. and Haseeb, A.S. Md. Abdul and Mannan, S.H. (2016) Reactions in Electrodeposited Cu/Sn and Cu/Ni/Sn Nanoscale Multilayers for Interconnects. Materials, 9 (6). p. 430. ISSN 1996-1944, DOI https://doi.org/10.3390/ma9060430.

Chia, Shir Reen and Ong, Hwai Chyuan and Chew, Kit Wayne and Show, Pau Loke and Phang, Siew Moi and Ling, Tau Chuan and Nagarajan, Dillirani and Lee, Duu-Jong and Chang, Jo-Shu (2018) Sustainable approaches for algae utilisation in bioenergy production. Renewable Energy, 129. pp. 838-852. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2017.04.001.

Chia, Shir Reen and Show, Pau Loke and Phang, Siew Moi and Ling, Tau Chuan and Ong, Hwai Chyuan (2018) Sustainable approach in phlorotannin recovery from macroalgae. Journal of Bioscience and Bioengineering, 126 (2). pp. 220-225. ISSN 1389-1723, DOI https://doi.org/10.1016/j.jbiosc.2018.02.015.

Chin, Desmond Daniel Vui Sheng and Yahya, Musli Nizam and Che Din, Nazli and Ong, Pauline (2018) Acoustic properties of biodegradable composite micro-perforated panel (BC-MPP) made from kenaf fibre and polylactic acid (PLA). Applied Acoustics, 138. pp. 179-187. ISSN 0003-682X, DOI https://doi.org/10.1016/j.apacoust.2018.04.009.

Chin, W.K. and Ong, Z.C. and Kong, K.K. and Khoo, S.Y. and Huang, Y.H. and Chong, W.T. (2017) Enhancement of Energy Harvesting Performance by a Coupled Bluff Splitter Body and PVEH Plate through Vortex Induced Vibration near Resonance. Applied Sciences, 7 (9). p. 921. ISSN 2076-3417, DOI https://doi.org/10.3390/app7090921.

Ching, Yern Chee and Ching, Yun Chen and Yaacob, Iskandar (2012) Weathering resistance of solventborne polyurethane/nanosilica composite. Advanced Science Letters, 12 (1). pp. 165-169. ISSN 1936-6612, DOI https://doi.org/10.1166/asl.2012.2739.

Chong, Cheng Tung and Mong, Guo Ren and Ng, Jo Han and Chong, William Woei Fong and Ani, Farid Nasir and Lam, Su Shiung and Ong, Hwai Chyuan (2019) Pyrolysis characteristics and kinetic studies of horse manure using thermogravimetric analysis. Energy Conversion and Management, 180. pp. 1260-1267. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2018.11.071.

Chong, W.T. and Gwani, M. and Tan, C.J. and Muzammil, W.K. and Poh, S.C. and Wong, K.H. (2017) Design and testing of a novel building integrated cross axiswind turbine. Applied Sciences, 7 (3). p. 251. ISSN 2076-3417, DOI https://doi.org/10.3390/app7030251.

Chong, W.T. and Muzammil, W.K. and Fazlizan, A. and Hassan, M.R. and Taheri, H. and Gwani, M. and Kothari, H. and Poh, S.C. (2015) Urban eco-greenergy (TM) hybrid wind-solar photovoltaic energy system and its applications. International Journal of Precision Engineering and Manufacturing, 16 (7). pp. 1263-1268. ISSN 2234-7593, DOI https://doi.org/10.1007/s12541-015-0165-3.

Choudhury, D. and Roy, T. and Krupka, I. and Hartl, M. and Mootanah, R. (2015) Tribological investigation of ultra-high molecular weight polyethylene against advanced ceramic surfaces in total hip joint replacement. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 229 (4). pp. 410-419. ISSN 1350-6501, DOI https://doi.org/10.1177/1350650114541106.

Choudhury, I.A. and Bhuiyan, M.S.H. and Nukman, Y. (2012) An innovative approach to monitor the chip formation effect on tool state using acoustic emission in turning. International Journal of Machine Tools and Manufacture, 58. pp. 19-28. ISSN 0890-6955, DOI https://doi.org/10.1016/j.ijmachtools.2012.02.001.

Choudhury, I.A. and Bhuiyan, M.S.H. and Nukman, Y. (2012) A new approach to investigate tool condition using dummy tool holder and sensor setup. The International Journal of Advanced Manufacturing Technology, 61 (5-8). pp. 465-479. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-011-3722-7.

Choudhury, I.A. and Chuan, P.C. (2013) Experimental evaluation of laser cut quality of glass fibre reinforced plastic composite. Optics and Lasers in Engineering, 51. pp. 1125-1132. ISSN 0143-8166,

Choudhury, I.A. and Lawal, S.A. and Nukman, Y. (2012) Developments in the formulation and application of vegetable oil-based metalworking fluids in turning process. The International Journal of Advanced Manufacturing Technology. pp. 1-12. ISSN 0268-3768,

Choukimath, Mantesh C. and Banapurmath, Nagaraj R. and Riaz, Fahid and Patil, Arun Y. and Jalawadi, Arun R. and Mujtaba, M. A. and Shahapurkar, Kiran and Khan, T. M. Yunus and Alsehli, Mishal and Soudagar, Manzoore Elahi M. and Fattah, I. M. R. (2022) Experimental and computational study of mechanical and thermal characteristics of h-BN and GNP infused polymer composites for elevated temperature applications. Materials, 15 (15). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15155397.

Chowdhury, Zaira Zaman and Krishnan, Bagavathi and Sagadevan, Suresh and Rafique, Rahman Faizur and Hamizi, Nor Aliya and Wahab, Yasmin Abdul and Khan, Ali Akbar and Johan, Mohd Rafie and Al-Douri, Yarub and Kazi, Salim Newaz and Shah, Syed Tawab (2018) Effect of Temperature on the Physical, Electro-Chemical and Adsorption Properties of Carbon Micro-Spheres Using Hydrothermal Carbonization Process. Nanomaterials, 8 (8). p. 597. ISSN 2079-4991, DOI https://doi.org/10.3390/nano8080597.

Chu, Yung Jeh and Chong, Wen Tong (2018) Numerical Study of Conventional and Biomimetic Marine Current Turbines in Tandem by Using Openfoam®. Journal of Mechanics, 34 (5). pp. 679-693. ISSN 1727-7191, DOI https://doi.org/10.1017/jmech.2017.46.

Cuce, Erdem and Saxena, Abhishek and Cuce, Pinar Mert and Sen, Harun and Eroglu, Hasan and Selvanathan, Shanmuga Priya and Sudhakar, Kumarasamy and Hasanuzzaman, Md (2022) Performance assessment of solar chimney power plants with natural thermal energy storage materials on ground: CFD analysis with experimental validation. International Journal of Low-Carbon Technologies, 17. pp. 752-759. ISSN 1748-1317, DOI https://doi.org/10.1093/ijlct/ctac001.

Cui, Yonggang and Lam, Wei Haur and Ong, Zhi Chao and Ling, Lloyd and Siow, Chee Loon and Robinson, Desmond and Hamill, Gerard (2020) Experimental scours by impinging twin-propeller jets at Quay Wall. Journal of Marine Science and Engineering, 8 (11). ISSN 2077-1312, DOI https://doi.org/10.3390/jmse8110872.

Dabbagh, V. and Sarhan, A.A.D. and Akbari, J. and Mardi, N.A. (2017) Design and manufacturing of ultrasonic motor with in-plane and out-of-plane bending vibration modes of rectangular plate with large contact area. Measurement, 109. pp. 425-431. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2017.06.007.

Dalkilic, Ahmet Selim and Celen, Ali and Erdogan, Murat and Sakamatapan, Kittipong and Newaz, Kazi Salim and Wongwises, Somchai (2020) Effect of saturation temperature and vapor quality on the boiling heat transfer and critical heat flux in a microchannel. International Communications in Heat and Mass Transfer, 117. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2020.104768.

Dambatta, Yusuf S. and Sayuti, Mohd and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2018) Comparative study on the performance of the MQL nanolubricant and conventional flood lubrication techniques during grinding of Si3N4 ceramic. The International Journal of Advanced Manufacturing Technology, 96 (9-12). pp. 3959-3976. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-018-1689-3.

Dambatta, Yusuf Suleiman and Li, Changhe and Sayuti, Mohd and Sarhan, Ahmed A.D. and Yang, Min and Li, Benkai and Chu, Anxue and Liu, Mingzheng and Zhang, Yanbin and Said, Zafar and Zhou, Zongming (2024) Grindability Evaluation of Ultrasonic Assisted Grinding of Silicon Nitride Ceramic Using Minimum Quantity Lubrication Based SiO2 Nanofluid. Chinese Journal of Mechanical Engineering, 37 (1). p. 25. ISSN 1000-9345, DOI https://doi.org/10.1186/s10033-024-01011-x.

Darain, K.M.U. and Jumaat, Mohd Zamin and Hossain, M.A. and Hosen, M.A. and Obaydullah, M. and Huda, M.N. and Hossain, I. (2015) Automated serviceability prediction of NSM strengthened structure using a fuzzy logic expert system. Expert Systems with Applications, 42 (1). pp. 376-389. ISSN 0957-4174, DOI https://doi.org/10.1016/j.eswa.2014.07.058.

Darain, K.M.U. and Jumaat, Mohd Zamin and Hossain, M.A. and Hosen, M.A. and Obaydullah, M. and Huda, M.N. and Hossain, I. (2015) Automated serviceability prediction of NSM strengthened structure using a fuzzy logic expert system. Expert Systems with Applications, 42 (1). pp. 376-389. ISSN 0957-4174, DOI https://doi.org/10.1016/j.eswa.2014.07.058.

Das, Likhan and Rubbi, Fazlay and Habib, Khairul and Saidur, R. and Islam, Nazrul and Saha, Bidyut Baran and Aslfattahi, Navid and Irshad, Kashif (2021) Hydrothermal performance improvement of an inserted double pipe heat exchanger with Ionanofluid. Case Studies in Thermal Engineering, 28. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2021.101533.

Datta, R.S. and Said, S.M. and Shahrir, S.R. and Abdullah, N. and Sabri, M.F.M. and Balamurugan, S. and Miyazaki, Y. and Hayashi, K. and Hashim, N.A. and Habiba, U. and Afifi, A.M. (2015) Ionic liquid entrapment by an electrospun polymer nanofiber matrix as a high conductivity polymer electrolyte. RSC Advances, 5 (60). pp. 48217-48223. ISSN 2046-2069, DOI https://doi.org/10.1039/c5ra03935e.

Davoodi, M.M. and Sapuan, S.M. and Aidy, Ali and Abu Osman, Noor Azuan and Oshkour, Azim Ataollahi and Wan Abas, Wan Abu Bakar (2012) Development process of new bumper beam for passenger car: a review. Materials & Design, 40. pp. 304-313. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2012.03.060.

Dawal, S. and Tahriri, F. and Jen, Y. and Case, K. and Tho, N. and Zuhdi, A. and Mousavi, M. and Amindoust, A. and Sakundarini, N. (2015) Empirical evidence of AMT practices and sustainable environmental initiatives in malaysian automotive SMEs. International Journal of Precision Engineering and Manufacturing, 16 (6). pp. 1195-1203. ISSN 2234-7593, DOI https://doi.org/10.1007/s12541-015-0154-6.

Debnath, S. and Said, S.M. and Roslan, M.F. and Sabri, M.F.M. and Long, B.D. (2015) A DFT study on an alkali atom doped decahedral silver nanocluster for potential application in opto-electronics and catalysis. RSC Advances, 5 (10). pp. 7665-7672. ISSN 2046-2069, DOI https://doi.org/10.1039/C4RA14876B.

Derahman, Nur Aqilah and Sayuti, Mohd and Yusof, Farazila and Dambatta, Yusuf Suleiman and Amran, Nor Amirah Mohd and Badiuzaman, Wan Nur Izzati Wan (2018) Effects of Process Parameters on the Surface Roughness of Stainless Steel 316L Parts Produced by Selective Laser Melting. Journal of Testing and Evaluation, 46 (4). p. 20170140. ISSN 0090-3973, DOI https://doi.org/10.1520/JTE20170140.

Dhahad, Hayder A. and Ahmadi, Samareh and Dahari, Mahidzal and Ghaebi, Hadi and Parikhani, Towhid (2021) Energy, exergy, and exergoeconomic evaluation of a novel CCP system based on a solid oxide fuel cell integrated with absorption and ejector refrigeration cycles. Thermal Science and Engineering Progress, 21. ISSN 2451-9049, DOI https://doi.org/10.1016/j.tsep.2020.100755.

Dharma, S. and Silitonga, A. S. and Shamsuddin, A. H. and Sebayang, A. H. and Milano, Jassinnee and Sebayang, R. and Sarjianto, . and Ibrahim, H. and Bahri, N. and Ginting, B. and Damanik, N. (2023) Properties and corrosion behaviors of mild steel in biodiesel-diesel blends. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 45 (2). pp. 3887-3899. ISSN 1556-7036, DOI https://doi.org/10.1080/15567036.2019.1668883.

Dian, L.Y. and Johan, M.R. (2015) Electrical conductivity and transport properties of gold decorated amorphous carbon nanotubes/Epoxy Composites. Fullerenes Nanotubes and Carbon Nanostructures, 23 (2). pp. 120-124. ISSN 1536-383X, DOI https://doi.org/10.1080/1536383x.2013.787600.

Dian, L.Y. and Johan, M.R. (2015) Functionalization of amorphous carbon nanotubes for au nanoparticles hybridization. Fullerenes Nanotubes and Carbon Nanostructures, 23 (2). pp. 181-186. ISSN 1536-383X, DOI https://doi.org/10.1080/1536383x.2013.869220.

Doroodian, M. and Rahman, M.N.A. and Kamarulzaman, Y. and Muhamad, N. (2014) Designing and Validating a Model for Measuring Innovation Capacity Construct. Advances in Decision Sciences, 2014. pp. 1-11. ISSN 2090-3359, DOI https://doi.org/10.1155/2014/576596.

Du, Gang and Wei, Haoran and Singh, Pradeep Kumar and Dutta, Ashit Kumar and Abdullaeva, Barno Sayfutdinovna and Fouad, Yasser and Alkhalaf, Salem and Alkhayyat, Ahmed and Deifalla, Ahmed (2024) Thermal/econmic/environmental considerations in a multi-geneation layout with a heat recovery process; A multi-attitude optimization based on ANN approach. Case Studies in Thermal Engineering, 55. p. 104170. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2024.104170.

Eid, Mohamed Moustafa Abdelhalim Ahmed and Zubir, Mohd Nashrul Mohd and Muhamad, Mohd Ridha Bin and Newaz, Kazi Md. Salim and Ahmadi, Goodarz and Rony, Md. Mehedy Hasan and Ibrahim, Farah Arina and Alam, Md Shadab and Abdullah, Shekh (2022) Passive heat transfer augmentation in conduits by surface modification: A review. Journal of Thermal Analysis and Calorimetry, 147 (24). pp. 14601-14620. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-022-11642-8.

Elias, Mohamad Fathi Mohamad and Saidur, Rahman and Ben-Mansour, Rached and Hepbasli, Arif and Rahim, Nasrudin Abd and Jesbains, Kaur (2018) Heat transfer and pressure drop characteristics of a plate heat exchanger using water based Al2O3 nanofluid for 30° and 60° chevron angles. Heat and Mass Transfer, 54 (10). pp. 2907-2916. ISSN 0947-7411, DOI https://doi.org/10.1007/s00231-018-2335-1.

Elsayed, B.A. and Hassan, Mohamed Mohsen Abdel-Naeim and Mekhilef, Saad (2015) Fuzzy swinging-up with sliding mode control for third order cart-inverted pendulum system. International Journal of Control Automation and Systems, 13 (1). pp. 238-248. ISSN 1598-6446, DOI https://doi.org/10.1007/s12555-014-0033-4.

Eltaweel, Mahmoud and Heggy, Aya H. and Yaseen, Zaher Mundher and Alawi, Omer A. and Falah, Mayadah W. and Hussein, Omar A. and Ahmed, Waqar and Homod, Raad Z. and Abdelrazek, Ali Hassan (2022) Application of the ANOVA method in the optimization of a thermoelectric cooler-based dehumidification system. Energy Reports, 8. pp. 10533-10545. ISSN 2352-4847, DOI https://doi.org/10.1016/j.egyr.2022.08.193.

Equbal, Azhar and Equbal, Md Asif and Equbal, Md Israr and Ravindrannair, Pranav and Khan, Zahid A. and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Tirth, Vineet and Javed, Syed and Kittur, M. (2022) Evaluating CNC milling performance for machining AISI 316 stainless steel with carbide cutting tool insert. MATERIAL, 15 (22). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15228051.

Equbal, Azhar and Shamim, Mohammad and Badruddin, Irfan Anjum and Equbal, Israr and Sood, Anoop Kumar and Ghazali, Nik Nazri Nik and Khan, Zahid A. (2020) Application of the combined ANN and GA for multi-response optimization of cutting parameters for the turning of glass fiber-reinforced polymer composites. Mathematics, 8 (6). ISSN 2227-7390, DOI https://doi.org/10.3390/MATH8060947.

Esfe, Mohammad Hemmat and Saedodin, Seyfolah and Naderi, Ali and Alirezaie, Ali and Karimipour, Arash and Wongwises, Somchai and Goodarzi, Marjan and Dahari, Mahidzal (2015) Modeling of thermal conductivity of ZnO-EG using experimental data and ANN methods. International Communications in Heat and Mass Transfer, 63. pp. 35-40. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2015.01.001.

Eshraghi, A. and Abu Osman, Noor Azuan and Gholizadeh, H. and Ali, S. and Shadgan, B. (2013) 100 top-cited scientific papers in limb prosthetics. BioMedical Engineering OnLine, 12. p. 119. ISSN 1475-925X, (In Press)

Eshraghi, Arezoo and Abu Osman, Noor Azuan and Gholizadeh, Hossein and Ahmadian, Jalil and Rahmati, Bizhan and Wan Abas, Wan Abu Bakar (2013) Development and evaluation of new coupling system for lower limb prostheses with acoustic alarm system. Scientific Reports, 3. p. 2270. ISSN 2045-2322, DOI https://doi.org/10.1038/srep02270.

Esmaeilzadeh, A. and Nik Ghazali, Nik Nazri and Metselaar, Hendrik Simon Cornelis and Naghavi, M. S. and Azuddin, Mamat and Iranmanesh, S. (2021) Thermal performance evaluation of the heat pipe by using 1-pyrene carboxylic-acid functionalized graphene nanofluid. International Communications in Heat and Mass Transfer, 129. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2021.105669.

Fadzallah, Iman Aris and Sabran, Nuur Syahidah and Hasnan, Megat Muhammad Ikhsan Megat and Ono, Takahito and Sabri, Mohd Faizul Mohd (2024) Computational modeling and theoretical analysis of polyvinylidene fluoride microarrays for hybrid piezo-pyroelectric energy harvesting. Polymers for Advanced Technologies, 35 (5). e6419. ISSN 1042-7147, DOI https://doi.org/10.1002/pat.6419.

Fahmi, - and Mofijur, M. and Ong, Hwai Chyuan and Jan, Badrul Mohamed and Kusumo, Fitranto and Sebayang, Abdi Hanra and Husin, Hazlina and Silitonga, Arridina Susan and Mahlia, Teuku Meurah Indra and Rahman, S.M. Ashrafur (2019) Production Process and Optimization of Solid Bioethanol from Empty Fruit Bunches of Palm Oil Using Response Surface Methodology. Processes, 7 (10). p. 715. ISSN 2227-9717, DOI https://doi.org/10.3390/pr7100715.

Fairuz, Athaya and Umam, M. Faeshol and Hasanuzzaman, Md. and Abd Rahim, Nasrudin and Mujtaba, I. M. (2023) Modeling and analysis of hybrid solar water desalination system for different scenarios in Indonesia. Energy Conversion and Management, 276. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2022.116475.

Faizal, W. M. and Ghazali, N. N. N. and Khor, C. Y. and Badruddin, Irfan Anjum and Zainon, Mohd Zamri and Ahmad Yazid, Aznijar and Ibrahim, Norliza Binti and Razi, Roziana Mohd (2020) Computational fluid dynamics modelling of human upper airway: A review. Computer Methods and Programs in Biomedicine, 196. ISSN 0169-2607, DOI https://doi.org/10.1016/j.cmpb.2020.105627.

Faraji, G. and Ebrahimi, M. and Bushroa, Abdul Razak (2014) Ultrasonic assisted tubular channel angular pressing process. Materials Science and Engineering: A, 599. pp. 10-15. ISSN 0921-5093, DOI https://doi.org/10.1016/j.msea.2014.01.069.

Faraji, G. and Mashhadi, M.M. and Bushroa, Abdul Razak and Babaei, A. (2013) TEM analysis and determination of dislocation densities in nanostructured copper tube produced via parallel tubular channel angular pressing process. Materials Science and Engineering: A, 563. pp. 193-198. ISSN 0921-5093, DOI https://doi.org/10.1016/j.msea.2012.11.065.

Fares, Dalila and Fathi, Mohamed and Shams, Immad and Mekhilef, Saad (2021) A novel global MPPT technique based on squirrel search algorithm for PV module under partial shading conditions. Energy Conversion and Management, 230. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2020.113773.

Farhana, Nur Khuzaimah and Saidi, Norshahirah Mohamad. and Bashir, Shahid and Ramesh, T. Subramaniam and Ramesh, Kasi (2021) Review on the revolution of polymer electrolytes for dye-sensitized solar cells. Energy & Fuels, 35 (23). pp. 19320-19350. ISSN 0887-0624, DOI https://doi.org/10.1021/acs.energyfuels.1c03039.

Fattah, I.M.R. and Masjuki, Haji Hassan and Kalam, M.A. and Masum, B.M. (2014) Effect of synthetic antioxidants on storage stability of calophyllum inophyllum biodiesel. Materials Research Innovations, 18 (S6). pp. 90-94. ISSN 1432-8917, DOI https://doi.org/10.1179/1432891714Z.000000000936.

Fauzi, H. and Metselaar, H.S.C. and Mahlia, T.M.I. and Silakhori, M. and Ong, H.C. (2015) Thermal characteristic reliability of fatty acid binary mixtures as phase change materials (PCMs) for thermal energy storage applications. Applied Thermal Engineering, 80. pp. 127-131. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2015.01.047.

Fayaz, H. and Rahim, Nasrudin Abd and Hasanuzzaman, Md. and Rivai, Ahmad and Nasrin, Rehena (2019) Numerical and outdoor real time experimental investigation of performance of PCM based PVT system. Solar Energy, 179. pp. 135-150. ISSN 0038-092X, DOI https://doi.org/10.1016/j.solener.2018.12.057.

Fayaz, H. and Ramesh, Singh and Afzal, Asif and Agbulut, Umit and Khan, Sher Afghan and Asif, Mohammed and Raja, Vijayanandh and Linul, Emanoil (2024) Investigation of numerical phase transition of nano-enhanced SiC/paraffin wax PCM in solar-assisted water desalination system. Thermal Science and Engineering Progress, 50. p. 102528. ISSN 2451-9049, DOI https://doi.org/10.1016/j.tsep.2024.102528.

Fayaz, H. and Ramesh, Singh and Raja, Vijayanandh and Linul, Emanoil and Khan, Sher Afghan and Asif, Mohammed and Buradi, Abdulrajak and Samuel, Olusegun David (2024) Temporal numerical analysis of beeswax PCM melting in a cube geometry subjected to a constant wall temperature condition. Case Studies in Thermal Engineering, 56. p. 104273. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2024.104273.

Fayaz, Hussain and Nasrin, Rehena and Rahim, Nasrudin Abd and Hasanuzzaman, Md. (2018) Energy and exergy analysis of the PVT system: Effect of nanofluid flow rate. Solar Energy, 169. pp. 217-230. ISSN 0038-092X, DOI https://doi.org/10.1016/j.solener.2018.05.004.

Fayeka, M. and Fazal, M.A. and Haseeb, A.S. Md. Abdul (2016) Effect of aluminum addition on the electrochemical corrosion behavior of Sn–3Ag–0.5Cu solder alloy in 3.5 wt% NaCl solution. Journal of Materials Science: Materials in Electronics, 27 (11). pp. 12193-12200. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-016-5374-8.

Fayyadh, Moatasem M. and Razak, Hashim A. (2022) The effect of CFRP-concrete bond mechanism on dynamic parameters of repaired concrete girders. Structural Engineering and Mechanics, 82 (3). pp. 343-354. ISSN 1225-4568, DOI https://doi.org/10.12989/sem.2022.82.3.343.

Fazal, M. A. and Sundus, F. and Masjuki, H. H. and Rubaiee, Saeed and Quazi, M. M. (2021) Tribological assessment of additive doped B30 biodiesel-diesel blend by using high frequency reciprocating rig test. Sustainable Energy Technologies and Assessments, 48. ISSN 2213-1388, DOI https://doi.org/10.1016/j.seta.2021.101577.

Fazal, M.A. and Jakeria, M.R. and Haseeb, A.S. Md. Abdul and Rubaiee, S. (2017) Effect of antioxidants on the stability and corrosiveness of palm biodiesel upon exposure of different metals. Energy, 135. pp. 220-226. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2017.06.128.

Fazal, M.A. and Suhaila, N.R. and Haseeb, A.S. Md. Abdul and Rubaiee, Saeed (2018) Sustainability of additive-doped biodiesel: Analysis of its aggressiveness toward metal corrosion. Journal of Cleaner Production, 181. pp. 508-516. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2018.01.248.

Fazal, M.A. and Suhaila, N.R. and Haseeb, A.S. Md. Abdul and Rubaiee, Saeed and Al-Zahrani, A. (2018) Influence of copper on the instability and corrosiveness of palm biodiesel and its blends: An assessment on biodiesel sustainability. Journal of Cleaner Production, 171. pp. 1407-1414. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2017.10.144.

Fessi, B.A. and Benabdallah, S. and Boudriga, N. and Hamdi, M. (2014) A multi-attribute decision model for intrusion response system. Information Sciences, 270. pp. 237-254. ISSN 00200255, DOI https://doi.org/10.1016/j.ins.2014.02.139.

Fikri, M. Arif and Samykano, M. and Pandey, A. K. and Kadirgama, K. and Kumar, R. Reji and Selvaraj, Jeyraj and Abd Rahim, Nasrudin and Tyagi, V. V. and Sharma, Kamal and Saidur, R. (2022) Recent progresses and challenges in cooling techniques of concentrated photovoltaic thermal system: A review with special treatment on phase change materials (PCMs) based cooling. Solar Energy Materials and Solar Cells, 241. ISSN 0927-0248, DOI https://doi.org/10.1016/j.solmat.2022.111739.

Fitriani, Fitriani and Said, Suhana Mohd and Rozali, Shaifulazuar and Salleh, Faiz and Sabri, Mohd Faizul Mohd and Bui, Duc Long and Nakayama, Tadachika and Raihan, Ovik and Megat Hasnan, Megat Muhammad Ikhsan and Bashir, Mohamed Bashir Ali and Kamal, Farhan (2018) Enhancement of Thermoelectric Properties in Cold Pressed Nickel Doped Bismuth Sulfide Compounds. Electronic Materials Letters, 14 (6). pp. 689-699. ISSN 1738-8090, DOI https://doi.org/10.1007/s13391-018-0072-8.

Forooghi, P. and Abdi, I.A. and Dahari, M. and Hooman, K. (2015) Buoyancy induced heat transfer deterioration in vertical concentric and eccentric annuli. International Journal of Heat and Mass Transfer, 81. pp. 222-233. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2014.10.009.

Gan, Woun Yoong and Ghazilla, Raja Ariffin Raja and Yap, Hwa Jen and Selvarajoo, Suman (2024) Industrial practitioner's perception on the application of exoskeleton system in automotive assembly industries: A Malaysian case study. Heliyon, 10 (4). e26183. ISSN 2405-8440, DOI https://doi.org/10.1016/j.heliyon.2024.e26183.

Gan, Yong Yang and Ong, Hwai Chyuan and Ling, Tau Chuan and Chen, Wei-Hsin and Chong, Cheng Tung (2019) Torrefaction of de-oiled Jatropha seed kernel biomass for solid fuel production. Energy, 170. pp. 367-374. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2018.12.026.

Gan, Yong Yang and Ong, Hwai Chyuan and Ling, Tau Chuan and Zulkifli, Nurin Wahidah Mohd and Wang, Chin Tsan and Yang, Yung Chin (2018) Thermal conductivity optimization and entropy generation analysis of titanium dioxide nanofluid in evacuated tube solar collector. Applied Thermal Engineering, 145. pp. 155-164. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2018.09.012.

Gan, Zhi Lon and Musa, Siti Nurmaya and Yap, Hwa Jen (2023) A review of the high-mix, low-volume manufacturing industry. Applied Sciences-Basel, 13 (3). ISSN 2076-3417, DOI https://doi.org/10.3390/app13031687.

Ganesan, Poo Balan and Zaib, Fathiah and Tuan Zahari, Tuan Zaharinie and Mobedi, Moghtada and Gnanasekaran, N. (2023) Thermal resistance of Open-Cell metal foam with thermal interface materials (TIM). Applied Thermal Engineering, 218. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2022.119336.

Garoosi, F. and Safaei, M.R. and Dahari, M. and Hooman, K. (2015) Eulerian-Lagrangian analysis of solid particle distribution in an internally heated and cooled air-filled cavity. Applied Mathematics and Computation, 250. pp. 28-46. ISSN 0096-3003, DOI https://doi.org/10.1016/j.amc.2014.10.068.

Gavhane, R. S. and Kate, A. M. and Soudagar, Manzoore Elahi M. and Wakchaure, V. D. and Balgude, Sagar and Rizwanul Fattah, I. M. and Nik-Ghazali, Nik-Nazri and Fayaz, H. and Khan, T. M. Yunus and Mujtaba, M. A. and Kumar, Ravinder and Shahabuddin, M. (2021) Influence of silica nano-additives on performance and emission characteristics of soybean biodiesel fuelled diesel engine. Energies, 14 (5). ISSN 1996-1073, DOI https://doi.org/10.3390/en14051489.

Gavhane, Rakhamaji S. and Kate, Ajit M. and Pawar, Abhay and Safaei, Mohammad Reza and Soudagar, Manzoore Elahi M. and Abbas, Muhammad Mujtaba and Ali, Hafiz Muhammad and Banapurmath, Nagaraj R. and Goodarzi, Marjan and Badruddin, Irfan Anjum and Ahmed, Waqar and Shahapurkar, Kiran (2020) Effect of zinc oxide Nano-additives and soybean biodiesel at varying loads and compression ratios on VCR diesel engine characteristics. Symmetry-Basel, 12 (6). ISSN 20738994,

Gerard, Ong and Ramesh, Subramaniam and Ramesh, Kasi and Numan, Arshid and Mustafa, Muhammad Norhaffis and Khalid, Mohammad and Ramesh, Singh and Tiong, S.K. (2024) Evaluation of the effect of precursor ratios on the electrochemical performances of binder-free NiMn-phosphate electrodes for supercapattery. Journal of Colloid and Interface Science, 667. pp. 585-596. ISSN 0021-9797, DOI https://doi.org/10.1016/j.jcis.2024.04.101.

Ghadimi, A. and Saidur, Rahman and Metselaar, H.S.C. (2011) A review of nanofluid stability properties and characterization in stationary conditions. International Journal of Heat and Mass Transfer, 54 (17-18). pp. 4051-4068. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2011.04.014.

Ghafarirad, H. and Rezaei, S.M. and Sarhan, A.A.D.M. and Mardi, N.A. (2015) Modified robust external force control with disturbance rejection with application to piezoelectric actuators. Transactions of the Institute of Measurement and Control, 37 (1). pp. 131-143. ISSN 0142-3312, DOI https://doi.org/10.1177/0142331214535409.

Gharehkhani, S. and Sadeghinezhad, E. and Kazi, S.N. and Yarmand, H. and Badarudin, A. and Safaei, M.R. and Zubir, M.N. (2015) Basic effects of pulp refining on fiber properties- a review. Carbohydrate Polymers, 115. pp. 785-803. ISSN 0144-8617, DOI https://doi.org/10.1016/j.carbpol.2014.08.047.

Gharehkhani, Samira and Seyed Shirazi, Seyed Farid and Yarmand, Hooman and Montazer, Elham and Kazi, Salim Newaz and Ibrahim, Rushdan and Ashjaei, Mehdi and Zulkifli, Nurin Wahidah Mohd and Rahmati, Sadegh (2018) The effect of nanocrystalline cellulose on flow properties of fiber crop aqueous suspension. Carbohydrate Polymers, 184. pp. 376-382. ISSN 0144-8617, DOI https://doi.org/10.1016/j.carbpol.2018.01.002.

Ghazali, Ihwan and Abdul-Rashid, Salwa Hanim and Md Dawal, Siti Zawiah and Aoyama, Hideki and Tontowi, Alva Edy and Ghazilla, Raja Ariffin Raja (2018) Green Product Preferences with Respect to Cultural Influences: Empirical Study in Indonesia. International Journal of Automation Technology, 12 (6). pp. 842-852. ISSN 1881-7629, DOI https://doi.org/10.20965/ijat.2018.p0842.

Ghazali, Ihwan and Abdul-Rashid, Salwa Hanim and Md Dawal, Siti Zawiah and Irianto, Irianto and Herawan, Safarudin Gazali and Ho, Fu-Haw and Abdullah, Rohana and Abdul Rasib, Amir Hamzah and Padzil, Nur Wardah Sufina (2023) Embedding Green Product Attributes Preferences and Cultural Consideration for Product Design Development: A Conceptual Framework. Sustainability, 15 (5). ISSN 2071-1050, DOI https://doi.org/10.3390/su15054542.

Ghazali, Nadiah and Basirun, Wan Jeffrey and Nor, Azmi Mohammed and Johan, Mohd Rafie and Rahman, Fariza Abdul (2024) Corrosion-resistant super-amphiphobic (PVDF-fnAl2O3) coating with thermal and mechanical stability. Journal of Coatings Technology and Research, 21 (2). pp. 589-599. ISSN 1547-0091, DOI https://doi.org/10.1007/s11998-023-00840-0.

Ghouli, S. and Ayatollahi, Majid Reza and Bushroa, Abdul Razak (2018) Fracture characterization of ceria partially stabilized zirconia using the GMTSN criterion. Engineering Fracture Mechanics, 199. pp. 647-657. ISSN 0013-7944, DOI https://doi.org/10.1016/j.engfracmech.2018.06.037.

Gnanasagaran, Constance Linda and Ramachandran, Karthikeyan and Ramesh, S. and Ubenthiran, Sutharsini and Jamadon, Nashrah Hani (2023) Effect of co-doping manganese oxide and titania on sintering behaviour and mechanical properties of alumina. Ceramics International, 49 (3). pp. 5110-5118. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2022.10.027.

Goh, Brandon Han Hoe and Ong, Hwai Chyuan and Chong, Cheng Tung and Chen, Wei-Hsin and Leong, Kin Yuen and Tan, Shiou Xuan and Lee, Xin Jiat (2020) Ultrasonic assisted oil extraction and biodiesel synthesis of Spent Coffee Ground. Fuel, 261. p. 116121. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2019.116121.

Goh, K.H. and Haseeb, A.S. Md. Abdul and Wong, Y.H. (2016) Effect of Oxidation Temperature on Physical and Electrical Properties of Sm2O3 Thin-Film Gate Oxide on Si Substrate. IEEE/TMS Journal of Electronic Materials, 45 (10). pp. 5302-5312. ISSN 0361-5235, DOI https://doi.org/10.1007/s11664-016-4694-z.

Goh, K.H. and Haseeb, A.S. Md. Abdul and Wong, Y.H. (2017) Lanthanide rare earth oxide thin film as an alternative gate oxide. Materials Science in Semiconductor Processing, 68. pp. 302-315. ISSN 1369-8001, DOI https://doi.org/10.1016/j.mssp.2017.06.037.

Goh, K.H. and Haseeb, A.S. Md. Abdul and Wong, Y.H. (2016) Physical and electrical properties of thermal oxidized Sm2O3 gate oxide thin film on Si substrate: Influence of oxidation durations. Thin Solid Films, 606. pp. 80-86. ISSN 0040-6090, DOI https://doi.org/10.1016/j.tsf.2016.03.051.

Goh, K.H. and Haseeb, A.S. Md. Abdul and Wong, Y.H. (2017) Structural characteristics of samarium oxynitride on silicon substrate. Journal of Alloys and Compounds, 722. pp. 729-739. ISSN 0925-8388, DOI https://doi.org/10.1016/j.jallcom.2017.06.179.

Goh, Kian Wei and Johan, Mohd Rafie and Wong, Yew Hoong (2018) Enhanced structural properties of In2O3 nanoparticles at lower calcination temperature synthesised by co-precipitation method. Micro & Nano Letters, 13 (2). pp. 270-275. ISSN 1750-0443, DOI https://doi.org/10.1049/mnl.2017.0540.

Goh, Y. and Haseeb, A.S. Md. Abdul (2016) Studies on electrodeposition behavior of Sn–Bi alloys in plating baths modified by hydroquinone and gelatin. Journal of Materials Science, 51 (12). pp. 5823-5833. ISSN 0022-2461, DOI https://doi.org/10.1007/s10853-016-9883-x.

Goh, Y. and Haseeb, A.S. Md. Abdul and Liew, H.L. and Sabri, M.F.M. (2015) Deformation and fracture behaviour of electroplated Sn–Bi/Cu solder joints. Journal of Materials Science, 50 (12). pp. 4258-4269. ISSN 0361-5235, DOI https://doi.org/10.1007/s10853-015-8978-0.

Goh, Y. and Haseeb, A.S. Md. Abdul and Sabri, Mohd Faizul Mohd (2013) Effects of hydroquinone and gelatin on the electrodeposition of Sn–Bi low temperature Pb-free solder. Electrochimica Acta, 90. pp. 265-273. ISSN 0013-4686, DOI https://doi.org/10.1016/j.electacta.2012.12.036.

Goh, Yi Sing and Goh, Yingxin and Chia, Pay Ying and Haseeb, A. S. M. A. (2021) Formation and nanomechanical properties of intermetallic compounds in electrodeposited Cu-Sn-Co multilayers. Journal of Materials Science: Materials in Electronics, 32 (7). pp. 9490-9499. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-021-05612-3.

Goh, Yi Sing and Haseeb, A. S. M. A. and Basirun, Wan Jeffrey and Wong, Yew Hoong and Sabri, Mohd Faizul Mohd and Low, Boon Yew (2023) Effects of concentration of adipic acid on the electrochemical migration of tin for printed circuit board assembly. Journal of Electronic Materials, 52 (3, SI). pp. 2236-2249. ISSN 0361-5235, DOI https://doi.org/10.1007/s11664-022-10155-2.

Goh, Yingxin and Goh, Yi Sing and Lee, Ee Lynn and Ong, Meng Teck and Haseeb, A.S. Md. Abdul (2018) Formation and characterization of intermetallic compounds in electroplated cobalt–tin multilayers. Journal of Materials Science: Materials in Electronics, 29 (7). pp. 5791-5798. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-018-8550-1.

Gopalan, Thirumaaran and Muhamad, Mohd Ridha and Hoe, Victor Chee Wai and Hassandarvish, Pouya (2024) N95 respirator hybrid decontamination method using Ultraviolet Germicidal Irradiation (UVGI) coupled with Microwave-Generated Steam (MGS). PLoS ONE, 19 (2 Febr). ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0296871.

Gopalan, Thirumaaran and Muhamad, Mohd Ridha and Hoe, Victor Chee Wai and Hassandarvish, Pouya (2024) N95 respirator hybrid decontamination method using Ultraviolet Germicidal Irradiation (UVGI) coupled with Microwave-Generated Steam (MGS). PLoS ONE, 19 (2). e0296871. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0296871.

Gordan, Meisam and Ong, Zhi Chao and Sabbagh-Yazdi, Saeed-Reza and Lai, Khin Wee and Ghaedi, Khaled and Ismail, Zubaidah (2022) From cognitive bias toward advanced computational intelligence for smart infrastructure monitoring. Frontiers in Psychology, 13. ISSN 1664-1078, DOI https://doi.org/10.3389/fpsyg.2022.846610.

Gordan, Meisam and Siow, Pei Yi and Deifalla, Ahmed Farouk and Ong, Zhi Chao and Ismail, Zubaidah and Khoo, Shin Yee (2022) Implementation of a secure storage using Blockchain for PCA-FRF sensor data of plate-like structures. IEEE Access, 10. pp. 84837-84852. ISSN 2169-3536, DOI https://doi.org/10.1109/ACCESS.2022.3197776.

Gul, M. and Masjuki, Haji Hassan and Kalam, M. A. and Zulkifli, N. W. M. and Mujtaba, M. A. (2020) A review: Role of fatty acids composition in characterizing potential feedstock for sustainable green lubricants by advance transesterification process and its global as well as Pakistani prospective. Bioenergy Research, 13 (1). pp. 1-22. ISSN 1939-1234, DOI https://doi.org/10.1007/s12155-019-10040-7.

Gul, M. and Zulkifli, Nurin Wahidah Mohd and Masjuki, H. H. and Kalam, M. A. and Mujtaba, M. A. and Harith, M. H. and Syahir, A. Z. and Ahmed, Waqar and Farooq, Abdul Bari (2020) Effect of TMP-based-cottonseed oil-biolubricant blends on tribological behavior of cylinder liner-piston ring combinations. Fuel, 278. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2020.118242.

Gul, Mustabshirha and Kalam, Md. Abul and Mohd Zulkifli, Nurin Wahidah and Hj. Hassan, Masjuki and Abbas, Md. Mujtaba and Yousuf, Sumra and Al-Dahiree, Omar Sabah and Gaffar Abbas, Md. Kamaleldin and Ahmed, Waqar and Imran, Shahab (2022) Enhancing AW/EP tribological characteristics of biolubricant synthesized from chemically modified cotton methyl-esters by using nanoparticle as additives. Industrial Lubrication and Tribology, 74 (4, SI). pp. 411-420. ISSN 0036-8792, DOI https://doi.org/10.1108/ILT-07-2021-0253.

Gul, Mustabshirha and Zulkifli, Nurin Wahidah Mohd and Kalam, Md Abul and Masjuki, Haji Hassan and Mujtaba, Muhammad Abbas and Yousuf, Sumra and Bashir, M. Nasir and Ahmed, Waqar and Yusoff, Mohd Nur Ashraf Mohd and Noor, Shazia and Ahmad, Rauf and Hassan, M. Tahir (2021) RSM and artificial neural networking based production optimization of sustainable cotton bio-lubricant and evaluation of its lubricity & tribological properties. Energy Reports, 7. pp. 830-839. ISSN 2352-4847, DOI https://doi.org/10.1016/j.egyr.2021.01.033.

Gulzar, M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Varman, M. and Rizwanul Fattah, I.M. (2015) Oil filter modification for biodiesel–fueled engine: A pathway to lubricant sustainability and exhaust emissions reduction. Energy Conversion and Management, 91. pp. 168-175. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.11.055.

Gulzar, Mubashir and Mahmood, Khalid and Zahid, Rehan and Alabdulkarem, Abdullah and Masjuki, Haji Hassan and Kalam, Md. Abul and Varman, Mahendra and Zulkifli, Nurin Wahidah Mohd and Ahmad, Pervaiz and Malik, Muhammad Sajjad Sabir (2018) The effect of particle size on the dispersion and wear protection ability of MoS2 particles in polyalphaolefin and trimethylolpropane ester. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232 (8). pp. 987-998. ISSN 1350-6501, DOI https://doi.org/10.1177/1350650117749404.

Gunnasegaran, P. and Mohammed, H.A. and Shuaib, N.H. and Saidur, Rahman (2010) The effect of geometrical parameters on heat transfer characteristics of microchannels heat sink with different shapes. International Communications in Heat and Mass Transfer, 37 (8). pp. 1078-1086. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2010.06.014.

Habiba, Umma and Siddique, Tawsif A. and Lee, Jacky Jia Li and Tan, Chin Joo and Ang, Bee Chin and Afifi, Amalina Muhammad (2018) Adsorption study of methyl orange by chitosan/polyvinyl alcohol/zeolite electrospun composite nanofibrous membrane. Carbohydrate Polymers, 191. pp. 79-85. ISSN 0144-8617, DOI https://doi.org/10.1016/j.carbpol.2018.02.081.

Habibullah, M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Zulkifli, N.W.M. and Masum, B.M. and Arslan, A. and Gulzar, M. (2015) Friction and wear characteristics of Calophyllum inophyllum biodiesel. Industrial Crops and Products, 76. pp. 188-197. ISSN 0926-6690, DOI https://doi.org/10.1016/j.indcrop.2015.05.042.

Haghshenasfard, M. and Yeoh, G.H. and Dahari, M. and Hooman, K. (2015) On numerical study of calcium sulphate fouling under sub-cooled flow boiling conditions. Applied Thermal Engineering, 81. pp. 18-27. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2015.01.079.

Hakim, Mohammed and Omran, Abdoulhdi A. Borhana and Ahmed, Ali Najah and Al-Waily, Muhannad and Abdellatif, Abdallah (2023) A systematic review of rolling bearing fault diagnoses based on deep learning and transfer learning: Taxonomy, overview, application, open challenges, weaknesses and recommendations. Ain Shams Engineering Journal, 14 (4). ISSN 20904479, DOI https://doi.org/10.1016/j.asej.2022.101945.

Halewadimath, S. S. and Banapurmath, Nagaraj R. and Yaliwal, Virupaxappa S. and Prasad, M. Guru and Jalihal, S. S. and Soudagar, Manzoore Elahi M. and Yaqoob, Haseeb and Mujtaba, Muhammad Abbas and Shahapurkar, Kiran and Safaei, Mohammad Reza (2022) Effect of manifold injection of hydrogen gas in producer gas and neem biodiesel fueled CRDI dual fuel engine. IInternational Journal of Hydrogen Energy, 47 (62). pp. 25913-25928. ISSN 0360-3199, DOI https://doi.org/10.1016/j.ijhydene.2022.02.135.

Hamad, F. A. and Santim, C. G. S. and Faraji, F. and Al-Dulaimi, Mustafa J. and Ganesan, Poo Balan (2021) Experimental and numerical study of pressure drop in pipes packed with large particles. Heat and Mass Transfer, 57 (1). pp. 111-123. ISSN 0947-7411, DOI https://doi.org/10.1007/s00231-020-02944-4.

Hambali, A. and Sapuan, S.M. and Rahim, A.S. and Ismail, N. and Nukman, Yusoff (2011) Concurrent Decisions on Design Concept and Material Using Analytical Hierarchy Process at the Conceptual Design Stage. Concurrent Engineering, 19 (2). pp. 111-121. ISSN 1063-293X, DOI https://doi.org/10.1177/1063293X11408138.

Hamza, Mukhtar Fatihu and Adamu, Jamilu Kamilu and Isa, Abdulbasid Ismail (2021) Euler-lagrange based dynamic model of double rotary inverted pendulum. Lecture Notes in Electrical Engineering, 666. pp. 419-434. ISSN 1876-1100, DOI https://doi.org/10.1007/978-981-15-5281-6_29.

Hamza, Mukhtar Fatihu and Raja Ghazilla, Raja Arif and Muhammad, Bashir Bala and Yap, Hwa Jen (2020) Balance and stability issues in lower extremity exoskeletons: A systematic review. Biocybernetics and Biomedical Engineering, 40 (4). pp. 1666-1679. ISSN 0208-5216, DOI https://doi.org/10.1016/j.bbe.2020.09.004.

Hamzah, N.A. and Abd Razak, Nasrul Anuar and Ab Karim, Mohd Sayuti and Salleh, S.Z. (2021) Comparative study on the accuracy of Biosculptor’s Bioscanner system in transtibial residual limb circumference measurement. Acta of Bioengineering and Biomechanics, 23 (4). pp. 173-182. ISSN 1509409X, DOI https://doi.org/10.37190/ABB-01905-2021-05.

Hamzah, Nur Afiqah and Abd Razak, Nasrul Anuar and Ab Karim, Mohd Sayuti and Salleh, Siti Zuliana (2022) Validation of a roughness parameters for defining surface roughness of prosthetic polyethylene Pe-Lite liner. Scientific Reports, 12 (1). ISSN 2045-2322, DOI https://doi.org/10.1038/s41598-022-05173-3.

Hamzah, Nur Afiqah and Razak, Nasrul Anuar Abd and Ab Karim, Mohd Sayuti and Salleh, Siti Zuliana (2022) Volume fluctuations in active and nonactive transtibial prosthetics users. BioMed Research International, 2022. ISSN 2314-6133, DOI https://doi.org/10.1155/2022/2669484.

Haneef, Intan Najwa Humaira Mohamed and Buys, Yose Fachmi and Shaffiar, Norhashimah Mohd and Shaharuddin, Sharifah Imihezri Syed and Hamid, Abdul Malek Abdul and Sabri, Mohd Faizul Mohd and Afifi, Amalina Muhammad (2021) Effect of HNT on mechanical and thermal properties of poly(lactic acid)/polypropylene carbonate blends. Polimery, 66 (9). pp. 459-465. ISSN 0032-2725, DOI https://doi.org/10.14314/polimery.2021.9.2.

Haowei, M. A. and Hussein, Uday Abdul-Reda and Al-Qaim, Zahraa Haleem and Altalbawy, Farag M. A. and AI Sadi, Hafidh l. and Fadhil, Ali Abdulhussain and Al-Taee, Muataz Mohammed and Hadrawi, Salema K. and Khalaf, Reem Muhsin and Jirjees, Iman Hazim and Zarringhalam, Majid and Hekmatifar, Maboud (2023) Employing Sisko non-Newtonian model to investigate the thermal behavior of blood flow in a stenosis artery: Effects of heat flux, different severities of stenosis, and different radii of the artery. Alexandria Engineering Journal, 68. pp. 291-300. ISSN 1110-0168, DOI https://doi.org/10.1016/j.aej.2022.12.048.

Harari, P. A. and Banapurmath, N. R. and Yaliwal, V. S. and Soudagar, Manzoore Elahi M. and Khan, T. M. Yunus and Mujtaba, M. A. and Safaei, Mohammad Reza and Akram, Naveed and Goodarzi, Marjan and Elfasakhany, Ashraf and EL-Seesy, Ahmed (2021) Experimental investigation on compression ignition engine powered with pentanol and thevetia peruviana methyl ester under reactivity controlled compression ignition mode of operation. Case Studies in Thermal Engineering, 25. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2021.100921.

Harizam, M.Z. and Tamrin, Khairul Fikri and Nukman, Yusoff and Yusof, Farazila and Sheikh, Nadeem Ahmed (2018) Effect of process parameters on the laser joining of stainless steel with three-dimensional (3-D) printed polymer sheet. Lasers in Engineering, 41 (4-6). pp. 393-408. ISSN 0898-1507,

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2011) Intermixing of metal oxide/Ag/metal oxide nanoscale multilayers prepared by rf reactive magnetron sputtering. Surface Engineering, 27 (5). pp. 382-388. ISSN 0267-0844, DOI https://doi.org/10.1179/1743294410Y.0000000014.

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, Rahman (2010) Adhesion and wear behavior of nanostructured titanium oxide thin films. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 5-10. ISSN 1823-0334,

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, Rahman and Abd Shukor, Mohd Hamdi (2010) Influence of substrate temperatures on structural, morphological and optical properties of RF-sputtered anatase Tio 2 films. Arabian Journal for Science and Engineering, 35 (1 C). pp. 147-156. ISSN 1319-8025,

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan (2009) Effects of annealing treatment on optical properties of anatase TiO 2 thin films. World Academy of Science, Engineering and Technology, 40. pp. 221-225. ISSN 2010-376X,

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan (2008) Effects of annealing treatment on optical properties of anatase TiO2 thin films. International Journal of Chemical and Biological Engineering, 1. pp. 1-5. ISSN 2010-3867,

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Abd Shukor, Mohd Hamdi (2010) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO2 thin films. Optical Materials, 32 (6). pp. 690-695. ISSN 0925-3467, DOI https://doi.org/10.1016/j.optmat.2009.07.011.

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Hamdi, M. (2009) Synthesis and annealing of nanostructured TiO2 films by radio-frequency magnetron sputtering. Journal of Applied Sciences, 9 (15). pp. 2815-2821. ISSN 1812-5654, DOI https://doi.org/10.3923/jas.2009.2815.2821.

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Johan, Mohd Rafie (2009) Structural, optical and morphological properties of TiO2/Ag/TiO2 multilayer films. AIP Conference Proceedings, 1136 (1). pp. 229-233. ISSN 0094-243X,

Hasan, S.W. and Said, S.M. and Bakar, A.S.A. and Sabri, M.F.M. and Sajid, I.H. and Hashim, N.A. (2017) Optimization of poly(vinylidene fluoride) membranes for enhanced power density of thermally driven electrochemical cells. Journal of Materials Science, 52 (17). pp. 10353-10363. ISSN 0022-2461, DOI https://doi.org/10.1007/s10853-017-1190-7.

Hasan, Syed Waqar and Said, Suhana Mohd and Sabri, Mohd Faizul Mohd and Jaffery, Hasan Abbas and Shuhaimi, Ahmad (2018) Thermally Resistive Electrospun Composite Membranes for Low-Grade Thermal Energy Harvesting. Macromolecular Materials and Engineering, 303 (3). p. 1700482. ISSN 1438-7492, DOI https://doi.org/10.1002/mame.201700482.

Hasan, Syed Waqar and Said, Suhana Mohd and Shuhaimi, Ahmad and Jaffery, Hasan Abbas and Sabri, Mohd Faizul Mohd (2018) The role of electrolyte fluidity on the power generation characteristics of thermally driven electrochemical cells. Sains Malaysiana, 47 (2). pp. 403-408. ISSN 0126-6039,

Hasanuzzaman, M. and Rahim, N.A. and Hosenuzzaman, M. and Saidur, Rahman and Mahbubul, I.M. and Rashid, M.M. (2012) Energy savings in the combustion based process heating in industrial sector. Renewable and Sustainable Energy Reviews, 16 (7). pp. 4527-4536. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.05.027.

Hasanuzzaman, M. and Rahim, N.A. and Saidur, Rahman and Kazi, S.N. (2011) Energy savings and emissions reductions for rewinding and replacement of industrial motor. Energy, 36 (1). pp. 233-240. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2010.10.046.

Hasanuzzaman, M. and Saidur, Rahman and Ali, M. and Masjuki, Haji Hassan (2007) Effects of variables on natural convective heat transfer through V-corrugated vertical plates. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 109-117. ISSN 18230334,

Hasanuzzaman, M. and Saidur, Rahman and Masjuki, Haji Hassan (2011) Effects of different variables on moisture transfer of household refrigerator-freezer. Energy Education Science and Technology Part A: Energy Science and Research, 27 (2). pp. 401-418. ISSN 1308-772X,

Hasanuzzaman, M. and Saidur, Rahman and Masjuki, Haji Hassan (2008) Investigation of energy consumption and energy savings of refrigerator-freezer during open and closed door condition. Journal of Applied Sciences, 8 (10). pp. 1822-1831. ISSN 1812-5654, DOI https://doi.org/10.3923/jas.2008.1822.1831.

Hasanuzzaman, M. and Saidur, Rahman and Masjuki, Haji Hassan (2008) Moisture transfer and energy losses of household refrigeratorfreezer during the closed door operation. International Journal of Mechanical and Materials Engineering, 3 (1). 30-37..

Hasanuzzaman, M. and Saidur, Rahman and Rahim, N.A. (2011) Energy, exergy and economic analysis of an annealing furnace. International Journal of Physical Sciences, 6 (7). pp. 1257-1266. ISSN 1992-1950, DOI https://doi.org/10.5897/IJPS10.273.

Hasanuzzaman, Md and Saidur, Rahman and Masjuki, Haji Hassan (2009) Effects of operating variables on heat transfer and energy consumption of a household refrigerator-freezer during closed door operation. Energy, 34 (2). pp. 196-198. ISSN 1823-0334, DOI https://doi.org/10.1016/j.energy.2008.11.003.

Haseeb, A.S. Md. Abdul and Islam, Md. Aminul and Bepari, Md. Mohar Ali (2000) Tribological behaviour of quenched and tempered, and austempered ductile iron at the same hardness level. Wear, 244 (1-2). pp. 15-19. ISSN 0043-1648, DOI https://doi.org/10.1016/S0043-1648(00)00404-X.

Haseeb, A.S. Md. Abdul and Rahman, Abu Zayed Mohammad Saliqur and Chia, Pay Ying (2018) Nanoindentation creep on Cu3Sn, Cu6Sn5 and (Cu, Ni)6Sn5 intermetallic compounds grown in electrodeposited multilayered thin film. Journal of Materials Science: Materials in Electronics, 29 (2). pp. 1258-1263. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-017-8030-z.

Hashim, Luqman H. and Halilu, Ahmed and Umar, Yahaya Balarabe and Johan, Mohd Rafie and Aroua, Mohamed Kheireddine and Koley, Paramita and Bhargava, Suresh K. (2023) Role of lattice strain in bifunctional catalysts for tandem furfural hydrogenation-esterification. Catalysis Science and Technology, 13 (3). pp. 774-787. ISSN 2044-4753, DOI https://doi.org/10.1039/d2cy01929a.

Hashim, Nur Afiqah and Abd Razak, Nasrul Anuar and Gholizadeh, Helia and Abu Osman, Noor Azuan (2021) Video game-based rehabilitation approach for individuals who have undergone upper limb amputation: Case-control study. JMIR Serious Games, 9 (1). ISSN 2291-9279, DOI https://doi.org/10.2196/17017.

Hasni, K. and Nabi, A. and Varman, Mahendra and Ilham, Zul (2018) Preparation of Biodiesel from Hibiscus sabdariffa Seeds Oil using Calcium Oxide Catalyst from Waste Egg Shells. Journal of the Society of Automotive Engineers Malaysia, 2 (2). pp. 177-183. ISSN 2600-8092,

Hasni, Khalil and Ilham, Zul and Mohamad, Jamaludin and Varman, Mahendra (2017) Brucea javanica seeds as source of potential natural antioxidants to improve biodiesel thermal and oxidative stability. Malaysian Journal of Fundamental and Applied Sciences, 13 (3). pp. 207-212. ISSN 2289-5981, DOI https://doi.org/10.11113/mjfas.v13n3.555.

Hassan, Mohamed Mohsen Abdel-Naeim and El-Sharief, Mahmoud A. and Aboul-Kasem, Ahmed and Ramesh, Singh and Purbolaksono, Judha (2012) A fuzzy model for evaluation and prediction of slurry erosion of 5127 steels. Materials & Design, 39. pp. 186-191. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2012.02.012.

Hassan, Mohamed Mohsen Abdel-Naeim and Naderi, Sadjad and Bushroa, Abdul Razak (2014) Low-velocity impact damage of woven fabric composites: Finite element simulation and experimental verification. Materials & Design, 53. pp. 706-718. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2013.07.068.

Hassan, Mohamed Mohsen Abdel-Naeim and Saleh, M.A.E. and Takakura, Norio and Ramesh, Singh and Purbolaksono, Judha (2012) Effect of bulge shape on wrinkling formation and strength of stainless steel thin sheet. Materials & Design, 42. pp. 37-45. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2012.05.035.

Hazmi, Alia Tasnim and Ahmad, Farah B. and Akmal, M. H. Maziati and Ralib, Aliza Aini Md and Ali, Fathilah Binti (2023) Fungal chitosan for potential application in piezoelectric energy harvesting: Review on experimental procedure of chitosan extraction. Alexandria Engineering Journal, 67. pp. 105-116. ISSN 1110-0168, DOI https://doi.org/10.1016/j.aej.2022.08.020.

Heng, L.C. and Al-Amin, A.Q. and Saidur, R. and Ward, T.A. (2015) Renewable energy choice: Cost and energy analysis of grid connected photovoltaic system in Malaysia. Environmental Progress & Sustainable Energy, 34 (3). pp. 866-880. ISSN 1944-7442, DOI https://doi.org/10.1002/ep.12040.

Heris, S.Z. and Fallahi, M. and Shanbedi, M. and Amiri, A. (2016) Heat transfer performance of two-phase closed thermosyphon with oxidized CNT/water nanofluids. Heat and Mass Transfer, 52 (1). pp. 85-93. ISSN 0947-7411, DOI https://doi.org/10.1007/s00231-015-1548-9.

Heydarzadeh, Mohammad S. and Rezaei, Seyed Mehdi and Mardi, Noor Azizi and Kamali E., Ali (2018) Compensation of friction and force ripples in the estimation of cutting forces by neural networks. Measurement, 114. pp. 354-364. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2017.09.032.

Heydarzadeh, Mohammad S. and Rezaei, Seyed Mehdi and Mardi, Noor Azizi and Kamali E., Ali (2018) Motion control of a two-axis linear motor-driven stage in the micro-milling process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 232 (1). pp. 65-76. ISSN 0954-4089, DOI https://doi.org/10.1177/0954408916683976.

Hooman, K. and Sauret, E. and Dahari, M. (2015) Theoretical modelling of momentum transfer function of bi-disperse porous media. Applied Thermal Engineering, 75. pp. 867-870. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2014.10.067.

Hosen, Md. Akter and Jumaat, Mohd Zamin and Islam, A. B. M. Saiful and Al Kaaf, Khalid Ahmed and Shammas, Mahaad Issa and Hakeem, Ibrahim Y. and Ul Islam, Mohammad Momeen (2023) Potential side-NSM strengthening approach to enhance the flexural performance of RC beams: Experimental, numerical and analytical investigations. Structural Engineering and Mechanics, 85 (2). pp. 179-195. ISSN 1225-4568, DOI https://doi.org/10.12989/sem.2023.85.2.179.

Hossain, A. and Choudhury, I.A. and Nahar, N. and Hossain, I. and Bin Mamat, A. (2015) Experimental and theoretical investigation of powder-binder mixing mechanism for metal injection molding. Materials and Manufacturing Processes, 30 (1). pp. 41-46. ISSN 1042-6914, DOI https://doi.org/10.1080/10426914.2014.930955.

Hossain, I. and Choudhury, I.A. and Mamat, A. and Shahid, A. and Khan, A.N. and Hossain, A. (2016) Predicting the Mechanical Properties of Viscose/Lycra Knitted Fabrics Using Fuzzy Technique. Advances in Fuzzy Systems, 2016. pp. 1-9. ISSN 1687-7101, DOI https://doi.org/10.1155/2016/3632895.

Hossain, M. Masrur and Shahriar, Tanvir and Habib, M. Ahsan and Hasanuzzaman, Md. and Inan, M. Navid (2024) Techno-economic and environment assessment of landfill and sewage treatment plant-based combined power generation system: A case study for Dhaka. Biomass Conversion and Biorefinery, 14 (1). 701 – 717. ISSN 2190-6815, DOI https://doi.org/10.1007/s13399-022-02422-3.

Hossain, M.S. and Ong, Z.C. and Ismail, Z. and Khoo, S.Y. (2017) A comparative study of vibrational response based impact force localization and quantification using radial basis function network and multilayer perceptron. Expert Systems with Applications, 85. pp. 87-98. ISSN 0957-4174, DOI https://doi.org/10.1016/j.eswa.2017.05.027.

Hossain, M.S. and Saidur, Rahman and Fayaz, H. and Rahim, N.A. and Islam, M.R. and Ahamed, J.U. and Rahman, M.M. (2011) Review on solar water heater collector and thermal energy performance of circulating pipe. Renewable and Sustainable Energy Reviews, 15 (8). pp. 3801-3812. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2011.06.008.

Hossain, M.S. and Saidur, Rahman and Sabri, Mohd Faizul Mohd and Said, Z. and Hassani, S. (2015) Spotlight on available optical properties and models of nanofluids: A review. Renewable and Sustainable Energy Reviews, 43. pp. 750-762. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2014.11.010.

Hossain, Md Arafat and Jewaratnam, Jegalakshimi and Ramalingam, Anantharaj and Sahu, Jaya Narayan and Ganesan, Poo Balan (2018) A DFT method analysis for formation of hydrogen rich gas from acetic acid by steam reforming process. Fuel, 212. pp. 49-60. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2017.09.098.

Hossain, Md Sazzad and Ong, Zhi Chao and Ng, Siew Cheok and Ismail, Zubaidah and Khoo, Shin Yee (2018) Inverse identification of impact locations using multilayer perceptron with effective time-domain feature. Inverse Problems in Science and Engineering, 26 (3). pp. 443-461. ISSN 1741-5977, DOI https://doi.org/10.1080/17415977.2017.1316496.

Hossain, S. and Masjuki, Haji Hassan and Varman, Mahendra and Kalam, M.A. and Rahman, S.M.A. (2015) Comparative evaluation of the blends of gas-to-liquid (GTL) fuels and biodiesels with diesel at high idling conditions: an in-depth analysis on engine performance and environment pollutants. RSC Advances, 5 (17). pp. 13068-13077. ISSN 2046-2069, DOI https://doi.org/10.1039/C4ra16239k.

Hosseini, Maryam and Abdelrazek, Ali H. and Sadri, Rad and Mallah, Abdul Rahman and Kazi, Salim Newaz and Chew, Bee Teng and Rozali, Shaifulazuar and Yusoff, Nukman (2018) Numerical study of turbulent heat transfer of nanofluids containing eco-friendly treated carbon nanotubes through a concentric annular heat exchanger. International Journal of Heat and Mass Transfer, 127. pp. 403-412. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2018.08.040.

Hosseini, S. and Azari, Pedram and Jiménez-Moreno, M.F. and Rodriguez-Garcia, A. and Pingguan-Murphy, Belinda and Madou, M.J. and Martinez-Chapa, S.O. (2017) Polymethacrylate Coated Electrospun PHB Fibers as a Functionalized Platform for Bio-Diagnostics: Confirmation Analysis on the Presence of Immobilized IgG Antibodies against Dengue Virus. Sensors, 17 (10). p. 2292. ISSN 1424-8220, DOI https://doi.org/10.3390/s17102292.

Hourmand, M. and Farahany, S. and Sarhan, A.A.D. and Noordin, M.Y. (2015) Investigating the electrical discharge machining (EDM) parameter effects on Al-Mg2Si metal matrix composite (MMC) for high material removal rate (MRR) and less EWR–RSM approach. The International Journal of Advanced Manufacturing Technology, 77 (5-8). pp. 831-838. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-014-6491-2.

Hourmand, Mehdi and Sarhan, Ahmed A. D. and Sayuti, Mohd and Hamdi, Mohd (2021) A comprehensive review on machining of titanium alloys. Arabian Journal for Science and Engineering, 46 (8). pp. 7087-7123. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-021-05420-1.

How, Heoy Geok and Masjuki, Haji Hassan and Kalam, Md. Abul and Teoh, Yew Heng (2018) Influence of injection timing and split injection strategies on performance, emissions, and combustion characteristics of diesel engine fueled with biodiesel blended fuels. Fuel, 213. pp. 106-114. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2017.10.102.

How, Heoy Geok and Masjuki, Haji Hassan and Kalam, Md. Abul and Teoh, Yew Heng and Chuah, Hun Guan (2018) Effect of Calophyllum Inophyllum biodiesel-diesel blends on combustion, performance, exhaust particulate matter and gaseous emissions in a multi-cylinder diesel engine. Fuel, 227. pp. 154-164. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2018.04.075.

Hozoorbakhsh, Asghar and Abd Shukor, Mohd Hamdi and Sarhan, Ahmed Aly Diaa Mohammed and Ismail, Mohd Idris Shah and Tang, Chak Yin and Tsui, Gary Chi Pong (2019) CFD modelling of weld pool formation and solidification in a laser micro-welding process. International Communications in Heat and Mass Transfer, 101. pp. 58-69. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2019.01.001.

Huq, Tahsinul and Ong, Hwai Chyuan and Chew, Bee Teng and Leong, Kin Yuen and Kazi, Salim Newaz (2022) Review on aqueous graphene nanoplatelet nanofluids: preparation, Stability, thermophysical properties, and applications in heat exchangers and solar thermal collectors. Applied Thermal Engineering, 210. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2022.118342.

Husin, Hazlina and Solo, Bernadine B. and Ibrahim, Izni Mariah and Ong, Hwai Chyuan and Roslan, Azmi (2018) Weight loss effect and potentiodynamic polarization response of 1-butyl-3-methylimidazolium chloride ionic liquid in highly acidic medium. Journal of Engineering Science and Technology, 13 (4). pp. 1005-1015. ISSN 1823-4690,

Hussain, Ghulam and Shehbaz, Tauheed and Alkahtani, Mohammed and Khaliq, Usman Abdul and Wei, Hongyu (2024) Nanomechanical, mechanical and microstructural characterization of electron beam welded Al2219-T6 tempered aerospace grade alloy: A comprehensive study. Heliyon, 10 (1). ISSN 2405-8440, DOI https://doi.org/10.1016/j.heliyon.2023.e23835.

Ibrahim, Dauda Sh. and Beibei, Sun and Fatai, Sado and Oluseyi, Orelaja Adewale and Sharif, Umer (2021) Numerical and experimental study of a gauge-shaped beam for improved performance of piezoelectric energy harvester. Microsystem Technologies-Micro-and-Nanosystems-Information Storage and processing, 27 (12). pp. 4253-4268. ISSN 0946-7076, DOI https://doi.org/10.1007/s00542-021-05219-y.

Ibrahim, Farah Arina and Muhamad, Mohd Ridha and Mohd Zubir, Mohd Nashrul and Omar, Mohd and Siri, Zailan and Hasan, Rony Mehedy and Eid, Mohamed Moustafa Abdelhalim Ahmed (2024) Experimental Analysis of the Improvement of Heat Transfer in Tube Heat Exchangers Via Passive Flow Generators Using Wire Coil Inserts. ASME Journal of Heat and Mass Transfer, 146 (6). 061901. ISSN 2832-8450, DOI https://doi.org/10.1115/1.4065115.

Ibrahim, Fatimah and Thiha, Aung and Zaman, Wan Safwani Wan Kamarul and Kamarulzaman, Yusniza and Dahlan, Nuraina Anisa and Jamaluddin, Nurul Fauzani and Madou, Marc J. (2022) Cardiac tissue engineering: A comparative analysis on microscaffold patterning. Materials Today Communications, 33. ISSN 2352-4928, DOI https://doi.org/10.1016/j.mtcomm.2022.104285.

Ibrahim, Mahmoud Z. and Sarhan, Ahmed A. D. and Kuo, T. Y. and Yusof, Farazila and Hamdi, M. and Lee, T. M. (2020) Developing a new laser cladded FeCrMoCB metallic glass layer on nickel-free stainless-steel as a potential superior wear-resistant coating for joint replacement implants. Surface & Coatings Technology, 392. ISSN 02578972, DOI https://doi.org/10.1016/j.surfcoat.2020.125755.

Ibrahim, Mahmoud Z. and Sarhan, Ahmed Aly Diaa Mohammed and Kuo, Tsung Yuan and Yusof, Farazila and Abd Shukor, Mohd Hamdi and Chien, Chi Sheng (2018) Investigate the effects of the substrate surface roughness on the geometry, phase transformation, and hardness of laser-cladded Fe-based metallic glass coating. The International Journal of Advanced Manufacturing Technology, 98 (5-8). pp. 1977-1987. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-018-2354-6.

Ibrahim, S. and Charinpanitkul, T. and Kobatake, E. and Sriyudthsak, M. (2016) Nanowires Nickel Oxide and Nanospherical Manganese Oxide Synthesized via Low Temperature Hydrothermal Technique for Hydrogen Peroxide Sensor. Journal of Chemistry, 2016. pp. 1-6. ISSN 2090-9063, DOI https://doi.org/10.1155/2016/9138961.

Ijam, A. and Saidur, R. and Ganesan, P. and Golsheikh, A.M. (2015) Stability, therrno-physical properties, and electrical conductivity of graphene oxide-deionized water/ethylene glycol based nanofluid. International Journal of Heat and Mass Transfer, 87. pp. 92-103. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2015.02.060.

Ijam, A. and Saidur, Rahman (2012) Nanofluid as a coolant for electronic devices (cooling of electronic devices). Applied Thermal Engineering, 32. pp. 76-82. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2011.08.032.

Ijam, A. and Saidur, Rahman and Ganesan, P. (2012) Cooling of minichannel heat sink using nanofluids. International Communications in Heat and Mass Transfer, 39 (8). pp. 1188-1194. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2012.06.022.

Ilham, Zul (2018) Performance analysis of a direct injection diesel engine using biodiesel and additives. Journal of Mechanical Engineering, SI 6 (1). pp. 67-80. ISSN 1823-5514,

Imran, M. and Lim, S.F.E. and Putra, I.S. and Ariffin, A.K. and Tan, C.J. and Purbolaksono, J. (2015) Assessment of a planar inclusion in a solid cylinder. Engineering Failure Analysis, 48. pp. 236-246. ISSN 1350-6307, DOI https://doi.org/10.1016/j.engfailanal.2014.11.027.

Imtenan, S. and Masjuki, Haji Hassan and Varman, M. and Fattah, I.M.R. (2015) Evaluation of n-butanol as an oxygenated additive to improve combustion-emission-performance characteristics of a diesel engine fuelled with a diesel-calophyllum inophyllum biodiesel blend. RSC Advances, 5 (22). pp. 17160-17170. ISSN 2046-2069, DOI https://doi.org/10.1039/C4ra15474f.

Imtenan, S. and Masjuki, Haji Hassan and Varman, M. and Fattah, I.M.R. and Sajjad, H. and Arbab, M.I. (2015) Effect of n-butanol and diethyl ether as oxygenated additives on combustion-emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel-jatropha biodiesel blend. Energy Conversion and Management, 94. pp. 84-94. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.01.047.

Imtenan, S. and Masjuki, Haji Hassan and Varman, Mahendra and Arbab, M.I. and Sajjad, H. and Fattah, I.M.R. and Abedin, M.J. and Hasib, Abu Saeed Md. (2014) Emission and performance improvement analysis of biodiesel-diesel blends with additives. Procedia Engineering, 90. 472 - 477. ISSN 1877-7058, DOI https://doi.org/10.1016/j.proeng.2014.11.759.

Imtenan, S. and Rahman, S.M.A. and Masjuki, Haji Hassan and Varman, M. and Kalam, Md. Abul (2015) Effect of dynamic injection pressure on performance, emission and combustion characteristics of a compression ignition engine. Renewable and Sustainable Energy Reviews, 52. pp. 1205-1211. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.07.166.

Inderan, Vicinisvarri and Arafat, M.M. and Haseeb, A.S. Md. Abdul and Sudesh, Kumar and Lee, Hooi Ling (2019) A Comparative Study of Structural and Ethanol Gas Sensing Properties of Pure, Nickel and Palladium Doped SnO2 Nanorods Synthesised by the Hydrothermal Method. Journal of Physical Science, 30 (1). pp. 127-143. ISSN 1675-3402, DOI https://doi.org/10.21315/jps2019.30.1.10.

Iqbal, Md. Arbab and Varman, Mahendra and Masjuki, Haji Hassan and Kalam, M.A. and Hossain, Sajjad and Sayeed, Imtenan (2015) Tailoring fuel properties using jatropha, palm and coconut biodiesel to improve CI engine performance and emission characteristics. Journal of Cleaner Production, 101. pp. 262-270. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2015.04.011.

Iranmanesh, S. and Ong, H.C. and Ang, B.C. and Sadeghinezhad, E. and Esmaeilzadeh, A. and Mehrali, M. (2017) Thermal performance enhancement of an evacuated tube solar collector using graphene nanoplatelets nanofluid. Journal of Cleaner Production, 162. pp. 121-129. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2017.05.175.

Irawati, Ninik and Harun, Sulaiman Wadi and Rahman, Husna Abdul and Chong, Su Sin and Hamizi, Nur Aliya and Ahmad, Harith (2017) Temperature sensing using CdSe quantum dot doped poly(methyl methacrylate) microfiber. Applied Optics, 56 (16). pp. 4675-4679. ISSN 0003-6935, DOI https://doi.org/10.1364/AO.56.004675.

Isa, H.M. and Amer, N.H. and Wan Mahadi, W.N.L. and Ramli, R. (2016) Using magnetic field analysis to evaluate the suitability of a magnetic suspension system for lightweight vehicles. Turkish Journal of Electrical Engineering and Computer Sciences, 24 (5). pp. 3924-3932. ISSN 1300-0632, DOI https://doi.org/10.3906/elk-1502-229.

Islam, M.M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Zulkifli, Nurin Wahidah Mohd and Habibullah, M. and Hossain, M.M. (2016) Improvement of cold flow properties of Cocos nucifera and Calophyllum inophyllum biodiesel blends using polymethyl acrylate additive. Journal of Cleaner Production, 137. pp. 322-329. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2016.07.080.

Islam, M.R. and Rahim, N.A. and Solangi, K.H. and Saidur, Rahman (2012) Assessing wind energy potentiality for selected sites in Malaysia. Energy Education Science and Technology Part a-Energy Science and Research, 29 (1). pp. 611-626. ISSN 1308-772X, DOI https://doi.org/10.1016/j.energy.2010.12.011.

Islam, M.R. and Saidur, Rahman and Rahim, N.A. (2011) Assessment of wind energy potentiality at Kudat and Labuan, Malaysia using Weibull distribution function. Energy, 36 (2). pp. 985-992. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2010.12.011.

Islam, M.R. and Saidur, Rahman and Rahim, N.A. and Solangi, K.H. (2009) Renewable energy research in Malaysia. Engineering e-Transaction, 4 (2). pp. 69-72. ISSN 1823-6379,

Islam, M.R. and Saidur, Rahman and Rahim, N.A. and Solangi, K.H. (2010) Usage of solar energy and its status in Malaysia. Engineering e-Transaction, 5 (1). pp. 6-10. ISSN 1823-6379,

Islam, M.T. and Abdullah, A.B. and Shahir, S.A. and Kalam, M.A. and Masjuki, Haji Hassan and Shumon, R. and Rashid, M.H. (2016) A public survey on knowledge, awareness, attitude and willingness to pay for WEEE management: Case study in Bangladesh. Journal of Cleaner Production, 137. pp. 728-740. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2016.07.111.

Islam, M.T. and Ganesan, P. and Cheng, J. (2015) A pair of bubbles' rising dynamics in a xanthan gum solution: a CFD study. RSC Advances, 5 (11). pp. 7819-7831. ISSN 2046-2069, DOI https://doi.org/10.1039/c4ra15728a.

Islam, Md Rabiul and Jaafar, Wan Zurina Wan and Lai, Sai Hin and Osman, Normaniza and Hossain, Anamul and Mohd, Nuruol Syuhadaa (2018) Development of an intelligent system based on ANFIS model for predicting soil erosion. Environmental Earth Sciences, 77 (5). p. 186. ISSN 1866-6280, DOI https://doi.org/10.1007/s12665-018-7348-z.

Islam, Md Tariqul and Ganesan, Poo Balan and Billah, Md Masum and Uddin, Md Nasir (2019) A numerical study of single air bubble formation comparison between in viscous liquid and in water. Asia-Pacific Journal of Chemical Engineering, 14 (6). e2367. ISSN 1932-2135, DOI https://doi.org/10.1002/apj.2367.

Islam, Mohammad Aminul and Hasanuzzaman, Md. and Rahim, Nasrudin Abd (2018) A comparative investigation on in-situ and laboratory standard test of the potential induced degradation of crystalline silicon photovoltaic modules. Renewable Energy, 127. pp. 102-113. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2018.04.051.

Ismail, M.S. and Moghavvemi, Mahmoud and Mahlia, Teuku Meurah Indra and Muttaqi, K.M. and Moghavvemi, S. (2015) Effective utilization of excess energy in standalone hybrid renewable energy systems for improving comfort ability and reducing cost of energy: A review and analysis. Renewable and Sustainable Energy Reviews, 42. pp. 726-734. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2014.10.051.

Ismail, M.S. and Purbolaksono, J. and Andriyana, A. and Tan, C.J. and Muhammad, N. and Liew, H.L. (2015) The use of initial imperfection approach in design process and buckling failure evaluation of axially compressed composite cylindrical shells. Engineering Failure Analysis, 51. pp. 20-28. ISSN 1350-6307, DOI https://doi.org/10.1016/j.engfailanal.2015.02.017.

Ismail, Norliza and Ismail, Roslina and Jalar, Azman and Omar, Ghazali and Salleh, Emee Marina and Kamil, Norinsan and Rahman, Irman Abdul (2018) Comparative study of interfacial interaction between aromatic and aliphatic functional group in solder wettability. Journal of Materials Science: Materials in Electronics, 29 (15). pp. 12910-12916. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-018-9410-8.

Ismail, Norliza and Jalar, Azman and Abu Bakar, Maria and Ismail, Roslina (2018) Kesan Penambahan Tiubnano Karbon terhadap Pertumbuhan Lapisan Sebatian antara Logam Sistem Pateri Sn-Ag-Cu/Cu akibat Penuaan Terma (Effect of carbon nanotube addition on the growth of intermetallic layer of Sn-Ag-Cu solder system under thermal aging). Sains Malaysiana, 47 (07). pp. 1585-1590. ISSN 0126-6039, DOI https://doi.org/10.17576/jsm-2018-4707-29.

Ismail, Nurul Athirah and Zulkifli, Nurin Wahidah Mohd and Chowdhury, Zaira Zaman and Johan, Mohd Rafie (2021) Functionalization of graphene-based materials: Effective approach for enhancement of tribological performance as lubricant additives. Diamond and Related Materials, 115. ISSN 0925-9635, DOI https://doi.org/10.1016/j.diamond.2021.108357.

Izadyar, N. and Ong, H.C. and Chong, W.T. and Mojumder, J.C. and Leong, K.Y. (2016) Investigation of potential hybrid renewable energy at various rural areas in Malaysia. Journal of Cleaner Production, 139. pp. 61-73. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2016.07.167.

Jabbar, Waheb A. and Ting, Tan Mei and Hamidun, M. Fikri I. and Kamarudin, Ajwad H. Che and Wu, Wenyan and Sultan, Jamil and Alsewari, AbdulRahman A. and Ali, Mohammed A. H. (2024) Development of LoRaWAN-based IoT system for water quality monitoring in rural areas. Expert Systems with Applications, 242. ISSN 0957-4174, DOI https://doi.org/10.1016/j.eswa.2023.122862.

Jafarlou, D.M. and Zalnezhad, E. and Hamouda, A.S. and Faraji, G. and Bin Mardi, N.A. and Mohamed, M.A.H. (2015) Evaluation of the mechanical properties of AA 6063 processed by severe plastic deformation. Metallurgical and Materials Transactions A, 46A (5). pp. 2172-2184. ISSN 1073-5623, DOI https://doi.org/10.1007/s11661-015-2806-7.

Jaffery, Hasan Abbas and Sabri, Mohd Faizul Mohd and Said, Suhana Mohd and Hasan, Syed Waqar and Sajid, Imran Haider and Nordin, Nor Ilyana Muhd and Megat Hasnan, Megat Muhammad Ikhsan and Shnawah, Dhafer Abdulameer and Moorthy, Chellapilla V.K.N.S.N. (2019) Electrochemical corrosion behavior of Sn-0.7Cu solder alloy with the addition of bismuth and iron. Journal of Alloys and Compounds, 810. p. 151925. ISSN 0925-8388, DOI https://doi.org/10.1016/j.jallcom.2019.151925.

Jaffery, Syed Hassan Abbas and Sabri, Mohd Faizul Mohd and Rozali, Shaifulazuar and Hasan, Syed Waqar and Mahdavifard, Mohammad Hossein and AL-Zubiady, Dhafer Abdul-ameer Shnawah and Ravuri, Balaji Rao (2022) Oxidation and wetting characteristics of lead-free Sn-0.7Cu solder alloys with the addition of Fe and Bi. Microelectronics Reliability, 139. ISSN 0026-2714, DOI https://doi.org/10.1016/j.microrel.2022.114802.

Jahan, Farheen and Soni, Manoj and Wakeel, Saif and Ahmad, Shafi and Bingol, Sedat (2022) Selection of automotive brake material using different MCDM techniques and their comparisons. Journal of Engineering Science and Technology Review, 15 (1). 24 -33. ISSN 1791-9320, DOI https://doi.org/10.25103/jestr.151.04.

Jahirul, M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Kalam, M.A. and Jayed, M.H. and Wazed, M.A. (2010) Comparative engine performance and emission analysis of CNG and gasoline in a retrofitted car engine. Applied Thermal Engineering, 30 (14-15). pp. 2219-2226. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2010.05.037.

Jahirul, M.I. and Saidur, Rahman and Hasanuzzaman, M. and Masjuki, Haji Hassan and Kalam, M.A. (2007) A comparison of the air pollution of gasoline and CNG driven car for Malaysia. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 130-138. ISSN 18230334 ,

Jahirul, M.I. and Saidur, Rahman and Masjuki, Haji Hassan (2009) Application of artificial neural network to predict brake specific fuel consumption of retrofitted cng engine. International Journal of Mechanical and Materials Engineering, 4 (3). pp. 249-255. ISSN 1823-0334,

Jahirul, M.I. and Saidur, Rahman and Masjuki, Haji Hassan (2010) Predictability of artificial neural network (ANN) in performance prediction of a retrofitted CNG engine. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 268-275. ISSN 1823-0334,

Jamal, Nur Ayuni and Maizatul, O. and Anuar, Hazleen and Yusof, Farazila and Nor, Yusilawati Ahmad and Khalid, Khalisanni and Zakaria, Muhamad Nazarudin (2018) Preliminary development of porous aluminum via powder metallurgy technique. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 460-466. ISSN 0933-5137, DOI https://doi.org/10.1002/mawe.201700269.

Jamaluddin, N.A.M. and Riayatsyah, Teuku Meurah Indra and Silitonga, Arridina Susan and Mofijur, M. and Shamsuddin, Abd Halim and Ong, Hwai Chyuan and Mahlia, Teuku Meurah Indra and Rahman, S.M. Ashrafur (2019) Techno-Economic Analysis and Physicochemical Properties of Ceiba pentandra as Second-Generation Biodiesel Based on ASTM D6751 and EN 14214. Processes, 7 (9). p. 636. ISSN 2227-9717, DOI https://doi.org/10.3390/pr7090636.

Jamshaid, M. and Masjuki, H. H. and Kalam, M. A. and Zulkifli, N. W. M. and Arslan, A. and Qureshi, A. A. (2022) Experimental investigation of performance, emissions and tribological characteristics of B20 blend from cottonseed and palm oil biodiesels. Energy, 239 (A). ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2021.121894.

Jamshaid, Muhammad and Masjuki, Haji Hassan and Kalam, Md. Abul and Zulkifli, Nurin Wahidah Mohd and Arslan, Ahmed and Alwi, Azham and Khuong, Leang So and Alabdulkarem, Abdullah and Syahir, A.Z. (2019) Production optimization and tribological characteristics of cottonseed oil methyl ester. Journal of Cleaner Production, 209. pp. 62-73. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2018.10.126.

Jannifar, A. and Baharom, Mohd Faizal and Jufriadi, - and Harun, Sulaiman Wadi (2018) Q-switched ytterbium-doped fiber laser using V2O5 polymer film as saturable absorber. Nonlinear Optics, Quantum Optics, 49 (1-2). pp. 1-9. ISSN 1543-0537,

Jannifar, A. and Baharom, Mohd Faizal and Zulkipli, N.F. and Jufriadi, - and Harun, Sulaiman Wadi (2018) Q-switched ytterbium-doped fiber laser with nickel oxide nanoparticles saturable absorber. Nonlinear Optics, Quantum Optics, 49 (1-2). pp. 41-50. ISSN 1543-0537,

Jannifar, A. and Zubir, Mohd Nashrul Mohd and Kazi, Salim Newaz and Zulkifli, Nurin Wahidah Mohd and Ahmad, Norhafizan (2018) Investigation on the feasibility of eliminating harmonic excitation signal en-route to performing experimental modal analysis (EMA) under operational condition. Journal of Mechanical Science and Technology, 32 (7). pp. 3009-3021. ISSN 1738-494X, DOI https://doi.org/10.1007/s12206-018-0604-z.

Jasni, Farahiyah and Hamzaid, Nur Azah and Al-Nusairi, Tawfik Yahya and Mohd Yusof, Nur Hidayah and Shasmin, Hanie Nadia and Ng, Siew Cheok (2019) Feasibility of a Gait Phase Identification Tool for Transfemoral Amputees Using Piezoelectric- Based In-Socket Sensory System. IEEE Sensors Journal, 19 (15). pp. 6437-6444. ISSN 1530-437X, DOI https://doi.org/10.1109/JSEN.2019.2910161.

Jatoi, Abdul Sattar and Hashmi, Zubair and Mazari, Shaukat Ali and Mubarak, Nabisab Mujawar and Karri, Rama Rao and Ramesh, Singh and Rezakazemi, Mashallah (2022) A comprehensive review of microbial desalination cells for present and future challenges. Desalination, 535. ISSN 0011-9164, DOI https://doi.org/10.1016/j.desal.2022.115808.

Jayed, M.H. and Masjuki, Haji Hassan and Saidur, Rahman and Kalam, M.A. and Jahirul, M.I. (2009) Environmental aspects and challenges of oilseed produced biodiesel in Southeast Asia. Renewable and Sustainable Energy Reviews, 13 (9). pp. 2452-2462. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2009.06.023.

Jeevan, T. P. and Jayaram, S. R. and Afzal, Asif and Ashrith, H. S. and Soudagar, Manzoore Elahi M. and Mujtaba, M. A. (2021) Machinability of AA6061 aluminum alloy and AISI 304L stainless steel using nonedible vegetable oils applied as minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43 (3). ISSN 1678-5878, DOI https://doi.org/10.1007/s40430-021-02885-x.

Jeevanantham, A.K. and Nanthagopal, K. and Ashok, B. and Al-Muhtaseb, Ala'a H. and Thiyagarajan, S. and Geo, Varuvel Edwin and Ong, Hwai Chyuan and Samuel, K. John (2019) Impact of addition of two ether additives with high speed diesel- Calophyllum Inophyllum biodiesel blends on NOx reduction in CI engine. Energy, 185. pp. 39-54. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2019.07.013.

Jun, Hieng Kiat and Arof, Abdul Kariem (2018) Performance of natural dyes as sensitizer in dye-sensitized solar cells employing LiBOB-based liquid electrolyte. Ionics, 24 (3). pp. 915-922. ISSN 0947-7047, DOI https://doi.org/10.1007/s11581-017-2233-4.

Kalantari, Katayoon and Afifi, Amalina Muhammad (2018) Novel chitosan/polyvinyl alcohol/talc composite for adsorption of heavy metals and dyes from aqueous solution. Separation Science and Technology, 53 (16). pp. 2527-2535. ISSN 0149-6395, DOI https://doi.org/10.1080/01496395.2018.1462388.

Kalantari, Katayoon and Afifi, Amalina Muhammad and Bayat, Saadi and Shameli, Kamyar and Yousefi, Samira and Mokhtar, Norrashidah and Kalantari, Alireza (2019) Heterogeneous catalysis in 4-nitrophenol degradation and antioxidant activities of silver nanoparticles embedded in Tapioca starch. Arabian Journal of Chemistry, 12 (8). pp. 5246-5252. ISSN 1878-5352, DOI https://doi.org/10.1016/j.arabjc.2016.12.018.

Kalantari, Katayoon and Afifi, Amalina Muhammad and Moniri, Mona and Moghaddam, Amin Boroumand and Kalantari, Alireza and Izadiyan, Zahra (2019) Autoclave-assisted synthesis of AgNPs in Z. officinale extract and assessment of their cytotoxicity, antibacterial and antioxidant activities. IET Nanobiotechnology, 13 (3). pp. 262-268. ISSN 1751-8741, DOI https://doi.org/10.1049/iet-nbt.2018.5066.

Kalantari, Katayoon and Afifi, Amalina Muhammad and Nia, Pooria Moozarm and Izadiyan, Zahra and Kalantari, Alireza and Abouzari-lotf, Ebrahim (2018) Electro-Catalytic Behavior of Silver Nanoparticles Embedded in Potato and Tapioca Starch for Oxygen Reduction Reaction. Starch - Stärke, 71 (1-2). p. 1800038. ISSN 0038-9056, DOI https://doi.org/10.1002/star.201800038.

Kalantari, Katayoon and Moradihamedani, Pourya and Ibrahim, Nor Azowa and Abdullah, Abdul Halim Bin and Afifi, Amalina Muhammad (2018) Polysulfone mixed-matrix membrane incorporating talc clay particles for gas separation. Polymer Bulletin, 75 (8). pp. 3723-3738. ISSN 0170-0839, DOI https://doi.org/10.1007/s00289-017-2234-5.

Kalidasan, B. and Pandey, A. K. and Shahabuddin, Syed and George, Mathew and Sharma, Kamal and Samykano, M. and Tyagi, V. V. and Saidur, R. (2021) Synthesis and characterization of conducting Polyaniline@cobalt- Paraffin wax nanocomposite as nano-phase change material: Enhanced thermophysical properties. Renewable Energy, 173. pp. 1057-1069. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2021.04.050.

Kallannavar, Vinayak and Kattimani, Subhaschandra and Soudagar, Manzoore Elahi M. and Mujtaba, M. A. and Alshahrani, Saad and Imran, Muhammad (2021) Neural network-based prediction model to investigate the influence of temperature and moisture on vibration characteristics of skew laminated composite sandwich plates. Materials, 14 (12). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14123170.

Kamangar, Sarfaraz and Khan, Mohammad Anas and Badruddin, Irfan Anjum and Yunus Khan, T.M. and Nik-Ghazali, Nik Nazri (2019) Numerical analysis of heat transfer in human head. Journal of Mechanical Science and Technology, 33 (7). pp. 3597-3605. ISSN 1738-494X, DOI https://doi.org/10.1007/s12206-019-0654-x.

Kamarudin, M.A. and Sahamir, S.R. and Datta, R.S. and Long, B.D. and Sabri, Mohd Faizul Mohd and Said, Suhana Mohd (2013) A Review on the Fabrication of Polymer-Based Thermoelectric Materials and Fabrication Methods. Scientific World Journal, 2013. pp. 1-17. ISSN 2356-6140, DOI https://doi.org/10.1155/2013/713640.

Kamaruzzaman, Lina Syazwana and Goh, Yingxin (2022) Effects of alloying element on mechanical properties of Sn-Bi solder alloys: A review. Soldering & Surface Mount Technology, 34 (5). pp. 300-318. ISSN 0954-0911, DOI https://doi.org/10.1108/SSMT-06-2021-0035.

Kamil, N.S.M. and Md Dawal, Siti Zawiah (2015) Effect of postural angle on back muscle activities in aging female workers performing computer tasks. Journal of Physical Therapy Science, 27 (6). pp. 1967-1970. ISSN 0915-5287 , DOI https://doi.org/10.1589/jpts.27.1967.

Kamyar, A. and Saidur, Rahman and Hasanuzzaman, M. (2012) Application of computational fluid dynamics (CFD) for nanofluids. International Journal of Heat and Mass Transfer, 55 (15-16). pp. 4104-4115. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2012.03.052.

Karami, Hadi and Papari-Zare, Solmaz and Shanbedi, Mehdi and Eshghi, Hossein and Dashtbozorg, Amirhosein and Akbari, Amir and Mohammadian, Erfan and Heidari, Milad and Sahin, Ahmet Z. and Chew, Bee Teng (2019) The thermophysical properties and the stability of nanofluids containing carboxyl-functionalized graphene nano-platelets and multi-walled carbon nanotubes. International Communications in Heat and Mass Transfer, 108. p. 104302. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2019.104302.

Karimzadeh, A. and Ayatollahi, M.R. and Bushroa, A.R. (2016) Effect of Dental Restorative Material Type and Shade on Characteristics of Two-Layer Dental Composite Systems. Latin American Journal of Solids and Structures, 13 (10). pp. 1851-1865. ISSN 1679-7825, DOI https://doi.org/10.1590/1679-78252562.

Karimzadeh, Atefeh and Ayatollahi, Majid Reza and Rahimian Koloor, Seyed Saeid and Bushroa, Abdul Razak and Yahya, Mohd Yazid and Tamin, Mohd Nasir (2019) Assessment of Compressive Mechanical Behavior of Bis-GMA Polymer Using Hyperelastic Models. Polymers, 11 (10). p. 1571. ISSN 2073-4360, DOI https://doi.org/10.3390/polym11101571.

Karimzadeh, Atefeh and Koloor, Seyed Saeid Rahimian and Ayatollahi, Majid Reza and Bushroa, Abdul Razak and Yahya, Mohd Yazid (2019) Assessment of Nano-Indentation Method in Mechanical Characterization of Heterogeneous Nanocomposite Materials Using Experimental and Computational Approaches. Scientific Reports, 9 (1). p. 15763. ISSN 2045-2322, DOI https://doi.org/10.1038/s41598-019-51904-4.

Karthickeyan, V. and Thiyagarajan, S. and Geo, Varuvel Edwin and Ashok, B. and Nanthagopal, K. and Ong, Hwai Chyuan and Vignesh, R. (2019) Simultaneous reduction of NOx and smoke emissions with low viscous biofuel in low heat rejection engine using selective catalytic reduction technique. Fuel, 255. p. 115854. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2019.115854.

Kasan, Nor Azman and Ghazali, Nurarina Ayuni and Hashim, Nurul Fakriah Che and Jauhari, Iswadi and Jusoh, Ahmad and Ikhwanuddi, Mhd (2018) 18s rDNA Sequence Analysis of Microfungi from Biofloc-based System in Pacific Whiteleg Shrimp, Litopenaeus vannamei Culture. Biotechnology, 17 (3). pp. 135-141. ISSN 1682-296X, DOI https://doi.org/10.3923/biotech.2018.135.141.

Kaur, Navjot and Somasundram, Chandran and Razali, Zuliana and Mourad, Abdel-Hamid I. and Hamed, Fathalla and Ahmed, Zienab F. R. (2024) Aloe vera/chitosan-based edible film with enhanced antioxidant, antimicrobial, thermal, and barrier properties for sustainable food preservation. Polymers, 16 (2). ISSN 2073-4360, DOI https://doi.org/10.3390/polym16020242.

Kazemi, Nima and Abdul-Rashid, Salwa Hanim and Ghazilla, Raja Ariffin Raja and Shekarian, Ehsan and Zanoni, Simone (2018) Economic order quantity models for items with imperfect quality and emission considerations. International Journal of Systems Science: Operations & Logistics, 5 (2). pp. 99-115. ISSN 2330-2674, DOI https://doi.org/10.1080/23302674.2016.1240254.

Kazemzadeh, A. and Ganesan, P. and Ibrahim, F. and Kulinsky, L. and Madou, M.J. (2015) Guided routing on spinning microfluidic platforms. RSC Advances, 5 (12). pp. 8669-8679. ISSN 2046-2069, DOI https://doi.org/10.1039/C4a14397c.

Kazi, S.N. and Badarudin, A. and Zubir, M.N.M. and Ming, H.N. and Misran, M. and Sadeghinezhad, E. and Mehrali, M. and Syuhada, N.I. (2015) Investigation on the use of graphene oxide as novel surfactant to stabilize weakly charged graphene nanoplatelets. Nanoscale Research Letters, 10. p. 15. ISSN 1931-7573, DOI https://doi.org/10.1186/s11671-015-0882-7.

Kazi, S.N. and Duffy, G.G. and Chen, X.D. (2015) Heat transfer coefficient of flowing wood pulp fibre suspensions to monitor fibre and paper quality. Applied Thermal Engineering, 78. pp. 172-184. ISSN 1359-4311,

Kazi, S.N. and Teng, K.H. and Zakaria, M.S. and Sadeghinezhad, E. and Bakar, M.A. (2015) Study of mineral fouling mitigation on heat exchanger surface. Desalination, 367. pp. 248-254. ISSN 0011-9164, DOI https://doi.org/10.1016/j.desal.2015.04.011.

Kee, Chia Ching and Ang, Bee Chin and Metselaar, Hendrik Simon Cornelis (2021) Synthesis of europium-doped calcium silicate hydrate via hydrothermal and coprecipitation method. Ceramics International, 47 (4). pp. 4803-4812. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2020.10.050.

Kee, S.Y. and Munusamy, Y. and Ong, K.S. and Metselaar, H.S.C. and Chee, S.Y. and Lai, K.C. (2017) Thermal Performance Study of Composite Phase Change Material with Polyacrylicand Conformal Coating. Materials, 10 (8). p. 873. ISSN 1996-1944, DOI https://doi.org/10.3390/ma10080873.

Kenzour, A. and Belhouchet, Hocine and Kolli, M. and Djouallah, S. and Kherifi, D. and Ramesh, Singh (2019) Sintering behavior of anorthite-based composite ceramics produced from natural phosphate and kaolin. Ceramics International, 45 (16). pp. 20258-20265. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2019.06.299.

Kezzar, Mohamed and Nafir, Noureddine and Dib, Amar and Sari, Mohamed Rafik and Dwivedi, Naveen and Noor, Noor Fadiya Mohd and Tabet, Ismail (2024) Magneto hydrodynamic boundary layer flow of ternary hybrid nano-fluid (TiO₂-SiO₂,-Al₂O₃/H<sub>2</s ub>O-C₂H₆O₂) a numerical and analytical Investigations. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46 (6). p. 378. ISSN 1678-5878, DOI https://doi.org/10.1007/s40430-024-04933-8.

Khairuddin, Nurul Mujahidah Ahmad and Afifi, Amalina Muhammad and Hashim, Nur Awanis and Mohamad, Shaza Eva and Kalantari, Katayoon (2018) Immobilization of Bovine Serum Albumin on the Chitosan/PVA Film. Sains Malaysiana, 47 (6). pp. 1311-1318. ISSN 0126-6039, DOI https://doi.org/10.17576/jsm-2018-4706-28.

Khairul, M.A. and Hossain, A. and Saidur, R. and Alim, M.A. (2014) Prediction of heat transfer performance of CuO/water nanofluids flow in spirally corrugated helically coiled heat exchanger using fuzzy logic technique. Computers and Fluids, 100. pp. 123-129. ISSN 00457930, DOI https://doi.org/10.1016/j.compfluid.2014.05.007.

Khalid, Amirah and Lim, Einly and Chan, Bee Ting and Abdul Aziz, Yang Faridah and Chee, Kok Han and Yap, Hwa Jen and Liew, Yih Miin (2019) Assessing regional left ventricular thickening dysfunction and dyssynchrony via personalized modeling and 3D wall thickness measurements for acute myocardial infarction. Journal of Magnetic Resonance Imaging, 49 (4). pp. 1006-1019. ISSN 1053-1807, DOI https://doi.org/10.1002/jmri.26302.

Khalid, Mohammad and Ratnam, Chantara Thevy and Abdullah, Luqman Chuah and Walvekar, Rashmi and Ching, Yern Chee and Ketabchi, Mohammad Reza (2016) Mechanical and physical performance of cowdung-based polypropylene biocomposites. Polymer Composites, 39 (1). pp. 288-296. ISSN 0272-8397, DOI https://doi.org/10.1002/pc.23928.

Khan, Ghulamullah and Basirun, Wan Jefrey and Badarudin, Ahmad and Kazi, Salim Newaz and Ahmed, Pervaiz and Ahmed, Syed Muzamil and Khan, Ghulam Mustafa (2018) Corrosion Inhibition Performance and Adsorption Mechanism of Novel Quinazoline Schiff Base on Low Alloy Steel in HCl Media. International Journal of Electrochemical Science, 13 (12). pp. 12420-12436. ISSN 1452-3981, DOI https://doi.org/10.20964/2018.12.40.

Khan, Haris Mahmood and Iqbal, Tanveer and Yasin, Saima and Irfan, Muhammad and Kazmi, Mohsin and Fayaz, Hussain and Mujtaba, Muhammad Abbas and Ali, Chaudhry Haider and Kalam, Md Abul and Soudagar, Manzoore Elahi M. and Ullah, Nehar (2021) Production and utilization aspects of waste cooking oil based biodiesel in Pakistan. Alexandria Engineering Journal, 60 (6). pp. 5831-5849. ISSN 1110-0168, DOI https://doi.org/10.1016/j.aej.2021.04.043.

Khan, M.I. and Yasmin, T. and Khan, N.B. (2016) Safety issues associated with the use and operation of natural gas vehicles: learning from accidents in Pakistan. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 38 (8). pp. 2481-2497. ISSN 1678-5878, DOI https://doi.org/10.1007/s40430-015-0410-9.

Khan, Muhammad Zia Ullah and Younis, M. Yamin and Akram, Naveed and Akbar, Bilal and Rajput, Umair Ahmed and Bhutta, Rumeel Ahmad and Uddin, Emad and Jamil, Muhammad Ahsan and Garcia Marquez, Fausto Pedro and Bin Zahid, Fahad (2021) Investigation of heat transfer in wavy and dual wavy micro-channel heat sink using alumina nanoparticles. Case Studies in Thermal Engineering, 28. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2021.101515.

Khanlou, H.M. and Ang, B.C. and Talebian, S. and Afifi, A.M. and Andriyana, A. (2015) Electrospinning of polymethyl methacrylate nanofibers: Optimization of processing parameters using the Taguchi design of experiments. Textile Research Journal, 85 (4). pp. 356-368. ISSN 0040-5175, DOI https://doi.org/10.1177/0040517514547208.

Khanlou, H.M. and Ang, B.C. and Talebian, S. and Barzani, M.M. and Silakhori, M. and Fauzi, H. (2015) A systematic study of maghemite/PMMA nano-fibrous composite via an electrospinning process: Synthesis and characterization. Measurement, 70. pp. 179-187. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2015.04.004.

Kherifi, D. and Belhouchet, H. and Ramesh, S. and Lee, K. Y. Sara and Kenzour, A. and Djoualah, S. and Abbas, M. K. G. and Wong, Yew Hoong and Ramesh, S. (2021) Sintering behaviour of fluorapatite-silicate composites produced from natural fluorapatite and quartz. Ceramics International, 47 (12). pp. 16483-16490. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2021.02.216.

Khodaii, Javad and Adibi, Hamed and Barazandeh, Farshad and Rezaei, Mehdi and Sarhan, Ahmed. A. D. (2021) Investigation of the surface integrity, flexural strength on the grinding of alumina for biomedical applications. Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology, 67. pp. 110-122. ISSN 0141-6359, DOI https://doi.org/10.1016/j.precisioneng.2020.09.019.

Khoo, S.Y. and Radeef, Z.S. and Ong, Z.C. and Huang, Y.H. and Chong, W.T. and Ismail, Z. (2017) Structural dynamics effect on voltage generation from dual coupled cantilever based piezoelectric vibration energy harvester system. Measurement, 107. pp. 41-52. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2017.05.008.

Kibria, M.A. and Anisur, M.R. and Mahfuz, M.H. and Saidur, Rahman and Metselaar, I.H.S.C. (2015) A review on thermophysical properties of nanoparticle dispersed phase change materials. Energy Conversion and Management, 95. pp. 69-89. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.02.028.

Kittur, M. and Andriyana, Andri and Ang, Bee Chin and Ch'ng, S. Y. and Mujtaba, M. A. (2021) Swelling of rubber in blends of diesel and cottonseed oil biodiesel. Polymer Testing, 96. ISSN 0142-9418, DOI https://doi.org/10.1016/j.polymertesting.2021.107116.

Kittur, Mohammad Yaseen and Kittur, Mohammed Ibrahim and Reddy, Avala Raji and Baig, Maughal Ahmed Ali and Ridwan and Khan, Sher Afghan and Faheem, Mohammed (2021) Mechanical response of aluminum 7075 with heat treatment and exfoliation corrosion. Materials Today-Proceedings, 47 (17, SI). pp. 6173-6179. ISSN 2214-7853, DOI https://doi.org/10.1016/j.matpr.2021.05.081.

Kittur, Mohammed Ibrahim and Andriyana, Andri and Ang, Bee Chin and Ch'ng, Shiau Ying and Verron, Erwan (2022) Inelastic response of thermo-oxidatively aged carbon black filled polychloroprene rubber. Part II: Mullins effect. Polymer Degradation and Stability, 204. ISSN 0141-3910, DOI https://doi.org/10.1016/j.polymdegradstab.2022.110120.

Koay, Hong Vin and Chuah, Joon Huang and Chow, Chee-Onn and Chang, Yang-Lang (2022) Detecting and recognizing driver distraction through various data modality using machine learning: A review, recent advances, simplified framework and open challenges (2014-2021). Engineering Applications of Artificial Intelligence, 115. ISSN 0952-1976, DOI https://doi.org/10.1016/j.engappai.2022.105309.

Koloor, Seyed Saeid Rahimian and Karimzadeh, Atefeh and Tamin, Mohd Nasir and Abd Shukor, Mohd Hamdi (2018) Effects of Sample and Indenter Configurations of Nanoindentation Experiment on the Mechanical Behavior and Properties of Ductile Materials. Metals, 8 (6). p. 421. ISSN 2075-4701, DOI https://doi.org/10.3390/met8060421.

Kosai, Shoki and Tan, Chia Kwang and Yamasue, Eiji (2018) Evaluating Power Reliability Dedicated for Sudden Disruptions: Its Application to Determine Capacity on the Basis of Energy Security. Sustainability, 10 (6). p. 2059. ISSN 2071-1050, DOI https://doi.org/10.3390/su10062059.

Kumar, Keerthi N. and Banapurmath, N. R. and Chandrashekar, T. K. and Jatadhara, G. S. and Soudagar, Manzoore Elahi M. and Anqi, Ali E. and Mujtaba, M. A. and Goodarzi, Marjan and Elfasakhany, Ashraf and Siddiqui, Md Irfanul Haque and Ali, Masood Ashraf (2021) Effect of parameters behavior of Simarouba methyl ester operated diesel engine. Energies, 14 (16). ISSN 1996-1073, DOI https://doi.org/10.3390/en14164973.

Kumar, L. Harish and Kazi, S. N. and Masjuki, H. H. and Zubir, M. N. M. and Jahan, Afrin and Sean, Oon Cheen (2022) Experimental study on the effect of bio-functionalized graphene nanoplatelets on the thermal performance of liquid flat plate solar collector. Journal of Thermal Analysis and Calorimetry, 147 (2). pp. 1657-1674. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-020-10527-y.

Kumar, L. Harish and Kazi Md., Salim Newaz and Masjuki, Haji Hassan and Mohd Zubir, Mohd Nashrul and Jahan, Afrin and Bhinitha, C. (2021) Energy, exergy and economic analysis of liquid flat-plate solar collector using green covalent functionalized graphene nanoplatelets. Applied Thermal Engineering, 192 (SI). ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2021.116916.

Kumar, Laveet and Hasanuzzaman, Md. and Rahim, Nasrudin Abd and Sleiti, Ahmad K. (2024) Thermoeconomic Analysis of a Solar-Assisted Industrial Process Heating System. International Journal of Energy Research, 2024. p. 4614066. ISSN 0363-907X, DOI https://doi.org/10.1155/2024/4614066.

Kumar, Pavitra and Lai, Sai Hin and Mohd, Nuruol Syuhadaa and Kamal, Md Rowshon and Ahmed, Ali Najah and Sherif, Mohsen and Sefelnasr, Ahmed and El-Shafie, Ahmed (2021) Enhancement of nitrogen prediction accuracy through a new hybrid model using ant colony optimization and an Elman neural network. Engineering Applications of Computational Fluid Mechanics, 15 (1). pp. 1843-1867. ISSN 1994-2060, DOI https://doi.org/10.1080/19942060.2021.1990134.

Kumar, S. Sunil and Londe, Neelakantha and Kumar, K. Dilip and Kittur, Mohammed Ibrahim (2021) Estimation of fracture toughness (K-IC) using Charpy impact test for Al6061T6 and Al7075T6 alloys subjected to corrosion. Materials Today-Proceedings, 46 (7, SI). pp. 2414-2420. ISSN 2214-7853, DOI https://doi.org/10.1016/j.matpr.2021.01.298.

Kumar, Sachin Sharma Ashok and Ramesh, Kasi and Ramesh, Subramaniam and Ramesh, Subramaniam and Bang, Le Thi (2024) A study on hybrid composite coatings: The significance of its surface wettability, dispersibility and thermal degradation performances. Progress in Organic Coatings, 189. p. 108351. ISSN 0300-9440, DOI https://doi.org/10.1016/j.porgcoat.2024.108351.

Kurniawan, Fajar and Musa, Siti Nurmaya and Moin, Noor Hasnah and Sahroni, Taufik Roni (2022) A systematic review on factors influencing container terminal's performance. Operations and Supply Chain Management, 15 (2). 174 – 192. ISSN 19793561, DOI https://doi.org/10.31387/oscm0490339.

Kusumo, Fitranto and Mahlia, T.M.I. and Shamsuddin, Abdul Halim and Ahmad, Abdul Rahim and Silitonga, Arridina Susan and Dharma, Surya and Mofijur, M. and Ideris, Fazril and Ong, Hwai Chyuan and Sebayang, R. and Milano, Jassinnee and Hassan, Masjuki Haji and Varman, M. (2022) Optimisation of biodiesel production from mixed Sterculia foetida and rice bran oil. International Journal of Ambient Energy, 43 (1). 4380 – 4390. ISSN 0143-0750, DOI https://doi.org/10.1080/01430750.2021.1888802.

Ladan, Magaji and Basirun, Wan Jeffrey and Kazi, Salim Newaz (2021) Polyaniline/graphene oxide/Zn-doped TiO2 nanocomposite coatings for the corrosion protection of carbon steel. Journal of Adhesion Science and Technology, 35 (22). pp. 2483-2505. ISSN 0169-4243, DOI https://doi.org/10.1080/01694243.2021.1892414.

Lah, Nurul Akmal Che and Johan, Mohd Rafie and Samykano, Mahendran and Saari, Mohd Mawardi (2018) Truncated and spheroidal Ag nanoparticles: a matter of size transformation. Colloid and Polymer Science, 296 (1). pp. 121-131. ISSN 0303-402X, DOI https://doi.org/10.1007/s00396-017-4230-6.

Latibari, S.T. and Mehrali, M. and Mahlia, T.M.I. and Afifi, A.B.M. and Akhiani, A.R. and Metselaar, H.S.C. (2015) Facile synthesis and thermal performances of stearic acid/titania core/shell nanocapsules by sol-gel method. Energy, 85. pp. 635-644. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2015.04.008.

Latif, Mohd Faruq Abdul and Ghazali, Nik Nazri Nik and Abdullah, M. F. and Ibrahim, Norliza Binti and Razi, Roziana M. and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Hussien, Mohamed and Ahammad, N. Ameer and Khan, Azeem (2023) Modelling the Upper Airways of Mandibular Advancement Surgery: A Systematic Review. Mathematics, 11 (1). ISSN 2227-7390, DOI https://doi.org/10.3390/math11010219.

Lau, C.K. and Ghosh, K. and Hussain, Mohd Azlan and Hassan, C.R.C. (2013) Fault diagnosis of Tennessee Eastman process with multi-scale PCA and ANFIS. Chemometrics and Intelligent Laboratory Systems, 120. pp. 1-14. ISSN 0169-7439, DOI https://doi.org/10.1016/j.chemolab.2012.10.005.

Lee, Ee Lynn and Goh, Yi Sing and Haseeb, A. S. M. A. and Wong, Yew Hoong and Sabri, Mohd Faizul Mohd and Low, Boon Yew (2023) Review-electrochemical migration in electronic materials: Factors affecting the mechanism and recent strategies for inhibition. Journal of The Electrochemical Society, 170 (2). ISSN 0013-4651, DOI https://doi.org/10.1149/1945-7111/acb61a.

Lee, Jacky Jia Li and Andriyana, Andri and Ang, Bee Chin and Huneau, Bertrand and Verron, Erwan (2018) Electrospun PMMA polymer blend nanofibrous membrane: electrospinability, surface morphology and mechanical response. Materials Research Express, 5 (6). 065311. ISSN 2053-1591, DOI https://doi.org/10.1088/2053-1591/aac87b.

Lee, K.Y. and Chin, K.M. and Ramesh, Singh and Tan, C.Y. and Hassan, M.A. and Purbolaksono, J. and Teng, W.D. and Sopyan, I. (2012) Effect of ultrasonication on synthesis of forsterite ceramics. Advanced Materials Research, 576. pp. 252-255. ISSN 1022-6680, DOI https://doi.org/10.4028/www.scientific.net/AMR.576.252.

Lee, S.L. and Saidur, R. and Sabri, M.F.M. and Min, T.K. (2015) Molecular dynamic simulation on the thermal conductivity of nanofluids in aggregated and non-aggregated states. Numerical Heat Transfer, Part A: Applications, 68 (4). pp. 432-453. ISSN 1040-7782, DOI https://doi.org/10.1080/10407782.2014.986366.

Lee, Xin Jiat and Ong, Hwai Chyuan and Gao, Wei and Ok, Yong Sik and Chen, Wei-Hsin and Goh, Brandon Han Hoe and Chong, Cheng Tung (2021) Solid biofuel production from spent coffee ground wastes: Process optimisation, characterisation and kinetic studies. Fuel, 292. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2021.120309.

Lee, Xin Jiat and Ong, Hwai Chyuan and Ooi, Jecksin and Yu, Kai Ling and Tham, Thing Chai and Chen, Wei-Hsin and Ok, Yong Sik (2022) Engineered macroalgal and microalgal adsorbents: Synthesis routes and adsorptive performance on hazardous water contaminants. Journal of Hazardous Materials, 423 (A). ISSN 0304-3894, DOI https://doi.org/10.1016/j.jhazmat.2021.126921.

Lei, Zhen Ce and Zainal Abidin, Nor Ishida and Wong, Yew Hoong (2018) Structural, chemical, and electrical properties of ZrO2/Ge system formed via oxidation/nitridation in N2O gas ambient. Journal of Materials Science: Materials in Electronics, 29 (15). pp. 12888-12898. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-018-9408-2.

Lekbir, Abdelhak and Hassani, Samir and Mekhilef, Saad and Saidur, R. and Ab Ghani, Mohd Ruddin and Gan, Chin Kim (2021) Energy performance investigation of nanofluid-based concentrated photovoltaic / thermal-thermoelectric generator hybrid system. International Journal of Energy Research, 45 (6, SI). pp. 9039-9057. ISSN 0363-907X, DOI https://doi.org/10.1002/er.6436.

Leong, K.Y. and Saidur, Rahman and Kazi, S.N. and Mamun, A.H. (2010) Performance investigation of an automotive car radiator operated with nanofluid-based coolants (nanofluid as a coolant in a radiator). Applied Thermal Engineering, 30 (17-18). pp. 2685-2692. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2010.07.019.

Leong, K.Y. and Saidur, Rahman and Khairulmaini, M. and Michael, Z. and Kamyar, A. (2012) Heat transfer and entropy analysis of three different types of heat exchangers operated with nanofluids. International Communications in Heat and Mass Transfer, 39 (6). pp. 838-843. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2012.04.003.

Leong, K.Y. and Saidur, Rahman and Mahlia, T.M.I. and Yau, Y.H. (2012) Entropy generation analysis of nanofluid flow in a circular tube subjected to constant wall temperature. International Communications in Heat and Mass Transfer, 39 (8). pp. 1169-1175. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2012.06.009.

Leong, K.Y. and Saidur, Rahman and Mahlia, T.M.I. and Yau, Y.H. (2012) Modeling of shell and tube heat recovery exchanger operated with nanofluid based coolants. International Journal of Heat and Mass Transfer, 55 (4). pp. 808-816. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2011.10.027.

Leong, Kin Yuen and Razali, Idayu and Ku Ahmad, Ku Zarina and Ong, Hwai Chyuan and Ghazali, Mariyam Jameelah and Abdul Rahman, Mohd Rosdzimin (2018) Thermal conductivity of an ethylene glycol/water-based nanofluid with copper-titanium dioxide nanoparticles: An experimental approach. International Communications in Heat and Mass Transfer, 90. pp. 23-28. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2017.10.005.

Leong, Y.M. and Haseeb, A.S. Md. Abdul (2016) Soldering Characteristics and Mechanical Properties of Sn-1.0Ag-0.5Cu Solder with Minor Aluminum Addition. Materials, 9 (7). p. 522. ISSN 1996-1944, DOI https://doi.org/10.3390/ma9070522.

Letchumanan, Devanthiran and Sok, Sophia P. M. and Ibrahim, Suriani and Nagoor, Noor Hasima and Arshad, Norhafiza Mohd (2021) Plant-based biosynthesis of copper/copper oxide nanoparticles: An update on their applications in biomedicine, mechanisms, and toxicity. Biomolecules, 11 (4). ISSN 2218-273X, DOI https://doi.org/10.3390/biom11040564.

Li, Hai and Khoo, Selina and Yap, Hwa Jen (2020) Differences in motion accuracy of Baduanjin between novice and senior students on inertial sensor measurement systems. Sensors, 20 (21). ISSN 1424-8220, DOI https://doi.org/10.3390/s20216258.

Li, Hai and Yap, Hwa Jen and Khoo, Selina (2021) Motion classification and features recognition of a traditional Chinese sport (Baduanjin) using sampled-based methods. Applied Sciences, 11 (16). ISSN 2076-3417, DOI https://doi.org/10.3390/app11167630.

Li, Maohua and Mesbah, Mohsen and Fallahpour, Alireza and Nasiri-Tabrizi, Bahman and Liu, Baoyu (2021) Mechanical strength estimation of ultrafine-grained magnesium implant by neural-based predictive machine learning. Materials Letters, 305. p. 130627. ISSN 0167-577X, DOI https://doi.org/10.1016/j.matlet.2021.130627.

Li, Y. and Hu , S. and Shen, J. (2014) The effect of peak power and pulse duration for dissimilar welding of brass to stainless steel. Materials Manufacturing Processes.

Li, Yongchuan and Raja Ghazilla, Raja Ariffin and Abdul-Rashid, Salwa Hanim (2022) QFD-based research on sustainable user experience optimization design of smart home products for the elderly: A case study of smart refrigerators. International Journal of Environmental Research and Public Health, 19 (21). ISSN 1660-4601, DOI https://doi.org/10.3390/ijerph192113742.

Liang, Lihua and Wen, Baohua and Musa, S. Nurmaya and Onn, Chiu Chuen and Ramesh, S. and Yan, Jianwei and Wang, Wei (2021) Rectify the performance of Green Building Rating Tool (GBRT) in sustainability: Evidence from ISO 21929-1. Journal of Cleaner Production, 278. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2020.123378.

Liang, Lihua and Wen, Baohua and Xu, Feng and Yan, Jianwei and Yan, Xiangqi and Ramesh, S. (2021) Linking the development of building sustainability assessment tools with the concept evolution of sustainable buildings,. Sustainability, 13 (22). ISSN 2071-1050, DOI https://doi.org/10.3390/su132212909.

Liang, Xiangbo and Kumar, N. Bharath and Mansir, Ibrahim B. and Singh, Pradeep Kumar and Abed, Azher M. and Dahari, Mahidzal and Nasr, Samia and Albalawi, Hind and Cherif, A. and Wae-hayee, Makatar (2023) Management of heat transfer and hydraulic characteristics of a micro-channel heat sink with various arrangements of rectangular vortex generators utilizing artificial neural network and response surface methodology. Case Studies in Thermal Engineering, 44. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2023.102850.

Liaquat, A.M. and Masjuki, Haji Hassan and Kalam, M.A. and Fattah, I.M.R. and Hazrat, M.A. and Varman, Mahendra and Mofijur, M. and Shahabuddin, M. (2013) Effect of coconut biodiesel blended fuels on engine performance and emission characteristics. Procedia Engineering, 56. pp. 583-590. ISSN 1877-7058, DOI https://doi.org/10.1016/j.proeng.2013.03.163.

Liew, Shaer Jin and Ng, Siew Cheok and Mustapa, Mohd Zamakhsyary and Usop, Zuriani and Fauthan, Mohd'Akashah and bin Mahalil, Khairuddin and Tan, Chiat Oon (2023) Colour sorting of red oak, yellow poplar and maple veneers using self-organizing map: Comparisons between different camera genres. European Journal of Wood and Wood Products, 81 (3). pp. 777-789. ISSN 0018-3768, DOI https://doi.org/10.1007/s00107-022-01900-9.

Lim, Hong Cheet and Ong, Zhi Chao and Brandt, Anders (2018) Implementation of phase controlled impact device for enhancement of frequency response function in operational modal testing. Journal of the Franklin Institute, 355 (1). pp. 291-313. ISSN 0016-0032, DOI https://doi.org/10.1016/j.jfranklin.2017.11.031.

Lim, Hong Cheet and Ong, Zhi Chao and Ismail, Zubaidah and Khoo, Shin Yee (2018) A Performance Study of Controlled Impact Timing on Harmonics Reduction in Operational Modal Testing. Journal of Dynamic Systems, Measurement, and Control, 141 (3). 034501. ISSN 0022-0434, DOI https://doi.org/10.1115/1.4041609.

Lim, M.W. and Lau, E.V. and Poh, P.E. and Chong, W.T. (2015) Interaction studies between high-density oil and sand particles in oil flotation technology. Journal of Petroleum Science and Engineering, 131. pp. 114-121. ISSN 0920-4105, DOI https://doi.org/10.1016/j.petrol.2015.04.016.

Lin, Bo-Jhih and Chen, Wei-Hsin and Lin, Yu-Ying and Chang, Jo-Shu and Farooq, Abid and Singh, Yashvir and Ong, Hwai Chyuan and Show, Pau Loke (2020) An evaluation of thermal characteristics of bacterium Actinobacillus succinogenes for energy use and circular bioeconomy. Bioresource Technology, 301. ISSN 0960-8524, DOI https://doi.org/10.1016/j.biortech.2020.122774.

Lin, Jiayi and Mo, Kim Hung and Goh, Yingxin and Onn, Chiu Chuen (2023) Potential of municipal woody biomass waste ash in the production of cold-bonded lightweight aggregates. Journal of Building Engineering, 63 (A). ISSN 2352-7102, DOI https://doi.org/10.1016/j.jobe.2022.105392.

Lin, Jiayi and Tan, Tee How and Yeo, Jerome Song and Goh, Yingxin and Ling, Tung-Chai and Mo, Kim Hung (2024) Optimization of the manufacturing process and properties of alkali-activated palm oil fuel ash-based cold-bonded aggregates. Journal of Cleaner Production, 437. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2024.140714.

Lin, Keyong and Musa, S. Nurmaya and Yap, Hwa Jen (2022) Vehicle Routing Optimization for Pandemic Containment: A Systematic Review on Applications and Solution Approaches. Sustainability, 14 (4). ISSN 2071-1050, DOI https://doi.org/10.3390/su14042053.

Lin, W. T. and Lin, Z. W. and Kuo, T. Y. and Chien, C. S. and Huang, J. W. and Chung, Y. L. and Chang, C. P. and Ibrahim, Mahmoud Zakaria and Lee, H. T. (2022) Mechanical and biological properties of atmospheric plasma-sprayed carbon nanotube-reinforced tantalum pentoxide composite coatings on Ti6Al4V alloy. Surface and Coatings Technology, 437. ISSN 0257-8972, DOI https://doi.org/10.1016/j.surfcoat.2022.128356.

Liu, Jingjing and Abu Osman, Noor Azuan and Al Kouzbary, Mouaz and Al Kouzbary, Hamza and Abd Razak, Nasrul Anuar and Shasmin, Hanie Nadia and Arifin, Nooranida (2022) Optimization and comparison of typical elastic actuators in powered ankle-foot prosthesis. International Journal of Control Automation and Systems, 20 (1). pp. 232-242. ISSN 1598-6446, DOI https://doi.org/10.1007/s12555-020-0980-x.

Liu, Jingjing and Liu, Jingang and Cheah, Pei Yi and Al Kouzbary, Mouaz and Al Kouzbary, Hamza and Yao, Selina X. and Shasmin, Hanie Nadia and Arifin, Nooranida and Razak, Nasrul Anuar Abd and Abu Osman, Noor Azuan (2024) Design and preliminary verification of a novel powered ankle-foot prosthesis: From the perspective of lower-limb biomechanics compared with ESAR foot. PLoS ONE, 19 (6). e0303397. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0303397.

Liu, Yiqiao and Chong, Wen Tong and Cao, Yijuan and Liu, Hongwei and Yu, Haowei and Cui, Tong and Chang, Li and Pan, Song (2022) Characteristics analysis and modeling of occupants' window operation behavior in hot summer and cold winter region, China. Building and Environment, 216. ISSN 0360-1323, DOI https://doi.org/10.1016/j.buildenv.2022.108998.

Liu, Yunpeng and Dong, Lin and Sabri, Mohd Faizul Mohd and Majid, Nazia Abdul and Ibrahim, Suriani (2024) Advancements in tunable and multifunctional metamaterial absorbers: a comprehensive review of microwave to terahertz frequency range. Journal of Physics D: Applied Physics, 57 (29). p. 293002. ISSN 0022-3727, DOI https://doi.org/10.1088/1361-6463/ad32a6.

Liyana, N.K. and Fazal, M.A. and Haseeb, A.S. Md. Abdul (2018) Polarization and EIS studies to evaluate the effect of aluminum concentration on the corrosion behavior of SAC105 solder alloy. Materials Science-Poland, 35 (4). pp. 694-701. ISSN 2083-1331, DOI https://doi.org/10.1515/msp-2017-0097.

Liza, S. and Ohtake, N. and Akasaka, H. and Munoz-Guijosa, J.M. (2015) Tribological and thermal stability study of nanoporous amorphous boron carbide films prepared by pulsed plasma chemical vapor deposition. Science and Technology of Advanced Materials, 16 (3). p. 13. ISSN 1468-6996, DOI https://doi.org/10.1088/1468-6996/16/3/035007.

Long, B.D. and Othman, R. and Zuhailawati, H. and Umemoto, M. (2014) Comparison of Two Powder Processing Techniques on the Properties of Cu-NbC Composites. Advances in Materials Science and Engineering, 2014. pp. 1-6. ISSN 1687-8434, DOI https://doi.org/10.1155/2014/160580.

Long, Su Xian and Khoo, Shin Yee and Ong, Zhi Chao and Soong, Ming Foong (2021) Design, modeling and testing of a new compressive amplifier structure for piezoelectric harvester. Smart Materials and Structures, 30 (12). p. 125010. ISSN 0964-1726, DOI https://doi.org/10.1088/1361-665X/ac2e1c.

Long, Su Xian and Khoo, Shin Yee and Ong, Zhi Chao and Soong, Ming Foong (2021) Stress enhancement of a trapezoidal bridge piezoelectric transducer in high force environment. Ferroelectrics, 573 (1). pp. 23-41. ISSN 0015-0193, DOI https://doi.org/10.1080/00150193.2021.1890461.

Loo, M.S. and Le Cam, J.B. and Andriyana, A. and Robin, E. and Afifi, A.M. (2015) Fatigue of swollen elastomers. International Journal of Fatigue, 74. pp. 132-141. ISSN 0142-1123, DOI https://doi.org/10.1016/j.ijfatigue.2014.11.015.

Loo, Mei Sze and Le Cam, Jean Benoît and Andriyana, Andri and Robin, Eric (2018) Inelastic responses of swollen nitrile rubber under cyclic loading. Rubber Chemistry and Technology, 91 (1). pp. 136-150. ISSN 0035-9475, DOI https://doi.org/10.5254/rct.18.83713.

Low, Y. J. and Kittur, M. I. and Andriyana, Andri and Ang, Bee Chin and Abidin, Nor Ishida Zainal (2023) A novel approach to evaluate the mechanical responses of elastin-like bioresorbable poly(glycolide-co-caprolactone) (PGCL) suture. Journal of the Mechanical Behavior of Biomedical Materials, 140. ISSN 1751-6161, DOI https://doi.org/10.1016/j.jmbbm.2023.105723.

Lwin, N. and Ahmad Fauzi, M.N. and Sreekantan, S. and Othman, R. (2015) Physical and electromagnetic properties of nanosized Gd substituted Mg–Mn ferrites by solution combustion method. Physica B: Condensed Matter, 461. pp. 134-139. ISSN 0921-4526, DOI https://doi.org/10.1016/j.physb.2015.01.001.

Lwin, N. and Othman, R. and Sreekantan, S. and Fauzi, M.N.A. (2015) Study on the structural and electromagnetic properties of Tm-substituted Mg-Mn ferrites by a solution combustion method. Journal of Magnetism and Magnetic Materials, 385. pp. 433-440. ISSN 0304-8853, DOI https://doi.org/10.1016/j.jmmm.2015.03.046.

M-Ridha, Mohanad J. and Faeq Ali, Muna and Hussein Taly, Ahmed and Abed, Khalid M. and Mohammed, Sabah J. and Muhamad, Mohd Hafizuddin and Abu Hasan, Hassimi (2022) Subsurface Flow Phytoremediation Using Barley Plants for Water Recovery from Kerosene-Contaminated Water: Effect of Kerosene Concentration and Removal Kinetics. Water, 14 (5). ISSN 2073-4441, DOI https://doi.org/10.3390/w14050687.

Ma, Yulin and Shahsavar, Amin and Moradi, Iman and Rostami, Sara and Moradikazerouni, Alireza and Yarmand, Hooman and Mohd Zulkifli, Nurin Wahidah (2021) Using finite volume method for simulating the natural convective heat transfer of nano-fluid flow inside an inclined enclosure with conductive walls in the presence of a constant temperature heat source. Physica A: Statistical Mechanics and its Applications, 580. ISSN 03784371, DOI https://doi.org/10.1016/j.physa.2019.123035.

Maalla, Allam and Dahari, Mahidzal and Chaturvedi, Rishabh and Fouad, Yasser and Abdullaev, Sherzod and Farag, Ahmed and Alkhayyat, Ahmed and Abdo, G.M. (2024) Artificial neural network-based optimization of heat absorption process of phase change materials in a novel-designed finned-plate latent heat storage system. Journal of Energy Storage, 86 (B). p. 111256. ISSN 2352-152X, DOI https://doi.org/10.1016/j.est.2024.111256.

Madlool, N.A. and Saidur, Rahman and Hossain, M.S. and Rahim, N.A. (2011) A critical review on energy use and savings in the cement industries. Renewable and Sustainable Energy Reviews, 15 (4). pp. 2042-2060. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2011.01.005.

Madlool, N.A. and Saidur, Rahman and Rahim, N.A. and Islam, M.R. and Hossian, M.S. (2012) An exergy analysis for cement industries: an overview. Renewable and Sustainable Energy Reviews, 16 (1). pp. 921-932. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2011.09.013.

Mahamudul, H. and Rahman, M.M. and Metselaar, H.S.C. and Mekhilef, Saad and Shezan, S.A. and Sohel, R. and Sayuti, Mohd and Badiuzaman, W.N.I. (2016) Temperature Regulation of Photovoltaic Module Using Phase Change Material: A Numerical Analysis and Experimental Investigation. International Journal of Photoenergy, 2016. pp. 1-8. ISSN 1110-662X, DOI https://doi.org/10.1155/2016/5917028.

Mahbubul, I.M. and Chong, T.H. and Khaleduzzaman, S.S. and Shahrul, I.M. and Saidur, Rahman and Long, B.D. and Amalina, Muhammad Afifi (2014) Effect of Ultrasonication Duration on Colloidal Structure and Viscosity of Alumina–Water Nanofluid. Industrial and Engineering Chemistry Research, 53 (16). pp. 6677-6684. ISSN 0888-5885, DOI https://doi.org/10.1021/ie500705j.

Mahbubul, I.M. and Khaleduzzaman, S.S. and Saidur, R. and Amalina, M.A. (2014) Rheological behavior of Al2O3/R141b nanorefrigerant. International Journal of Heat and Mass Transfer, 73. pp. 118-123. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2014.01.073.

Mahbubul, I.M. and Saadah, A. and Saidur, R. and Khairul, M.A. and Kamyar, A. (2015) Thermal performance analysis of Al2O3/R-134a nanorefrigerant. International Journal of Heat and Mass Transfer, 85. pp. 1034-1040. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2015.02.038.

Mahbubul, I.M. and Saidur, Rahman and Amalina, M.A. (2012) Investigation of viscosity of R123-TIO 2 nanorefrigerant. International Journal of Mechanical and Materials Engineering, 7 (2). pp. 146-151. ISSN 18230334,

Mahbubul, I.M. and Saidur, Rahman and Amalina, M.A. (2012) Latest developments on the viscosity of nanofluids. International Journal of Heat and Mass Transfer, 55 (4). pp. 874-885. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2011.10.021.

Mahbubul, I.M. and Saidur, Rahman and Amalina, M.A. and Elcioglu, E.B. and Okutucu-Ozyurt, T. (2015) Effective ultrasonication process for better colloidal dispersion of nanofluid. Ultrasonics Sonochemistry, 26. pp. 361-369. ISSN 1350-4177, DOI https://doi.org/10.1016/j.ultsonch.2015.01.005.

Maher, I. and Eltaib, M.E.H. and Sarhan, A.A.D. and El-Zahry, R.M. (2015) Cutting force-based adaptive neuro-fuzzy approach for accurate surface roughness prediction in end milling operation for intelligent machining. The International Journal of Advanced Manufacturing Technology, 76 (5-8). pp. 1459-1467. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-014-6379-1.

Maher, I. and Sarhan, A.A.D. and Hamdi, M. (2015) Review of improvements in wire electrode properties for longer working time and utilization in wire EDM machining. The International Journal of Advanced Manufacturing Technology, 76 (1-4). pp. 329-351. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-014-6243-3.

Mahlia, T.M. Indra and Masjuki, Haji Hassan and Choudhury, Imtiaz Ahmed and Saidur, Rahman (2001) Potential CO2 reduction by implementing energy efficiency standard for room air conditioner in Malaysia. Energy Conversion and Management, 42 (14). pp. 1673-1685. ISSN 0196-8904, DOI https://doi.org/10.1016/S0196-8904(00)00161-8.

Mahlia, T.M.I. and Masjuki, Haji Hassan and Choudhury, I.A. and Saidur, Rahman (2002) Testing and rating non-ducted air conditioners in Malaysia: The applicability of ISO standard 5151. International Journal of Power and Energy Systems, 22 (2). pp. 80-84. ISSN 1078-3466,

Mahlia, T.M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Amalina, M.A. (2004) Cost-benefit analysis of implementing minimum energy efficiency standards for household refrigerator-freezers in Malaysia. Energy Policy, 32 (16). pp. 1819-1824. ISSN 03014215, DOI https://doi.org/10.1016/S0301-4215(03)00169-1.

Mahlia, T.M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Amalina, M.A. (2004) Mitigation of emissions through energy efficiency standards for room air conditioners in Malaysia. Energy Policy, 32 (16). pp. 1783-1787. ISSN 0301-4215, DOI https://doi.org/10.1016/s0301-4215(03)00170-8.

Mahlia, T.M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Amalina, M.A. (2004) Viewpoint: Mitigation of emissions through energy efficiency standards for room air conditioners in Malaysia. Energy Policy, 32 (16). pp. 1783-1787. ISSN 0301-4215, DOI https://doi.org/10.1016/S0301-4215(03)00170-8.

Mahlia, T.M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Choudhury, I.A. and NoorLeha, A.R. (2003) Projected electricity savings from implementing minimum energy efficiency standard for household refrigerators in Malaysia. Energy, 28 (7). pp. 751-754. ISSN 0360-5442, DOI https://doi.org/10.1016/s0360-5442(02)00190-1.

Mahlia, T.M.I. and Masjuki, Haji Hassan and Taha, F.M. and Rahim, N.A. and Saidur, Rahman (2005) Energy labeling for electric fans in Malaysia. Energy Policy, 33 (1). pp. 63-68. ISSN 0301-4215, DOI https://doi.org/10.1016/s0301-4215(03)00198-8.

Mahlia, T.M.I. and Taufiq, B.N. and Ong, K.P. and Saidur, Rahman (2011) Exergy analysis for day lighting, electric lighting and space cooling systems for a room space in a tropical climate. Energy and Buildings, 43 (7). pp. 1676-1684. ISSN 0378-7788, DOI https://doi.org/10.1016/j.enbuild.2011.03.011.

Mahlia, Teuku Meurah Indra and Hor, C.G. and Masjuki, Haji Hassan and Husnawan, M. and Varman, M. and Mekhilef, Saad (2010) Clothes drying from room air conditioning waste heat: thermodynamics investigation. Arabian Journal for Science and Engineering, 35 (1B). pp. 339-351. ISSN 1319-8025,

Mahlia, Teuku Meurah Indra and Razak, Hashim Abdul and Nursahida, M.A. (2011) Life cycle cost analysis and payback period of lighting retrofit at the University of Malaya. Renewable and Sustainable Energy Reviews, 15 (2). pp. 1125-1132. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2010.10.014.

Mahlia, Teuku Meurah Indra and Saidur, Rahman (2010) A review on test procedure, energy efficiency standards and energy labels for room air conditioners and refrigerator-freezers. Renewable and Sustainable Energy Reviews, 14 (7). pp. 1888-1900. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2010.03.037.

Mahlia, Teuku Meurah Indra and Saidur, Rahman and Husnawan, M. and Masjuki, Haji Hassan and Kalam, M.A. (2010) An approach to estimate the life-cycle cost of energy efficiency improvement of room air conditioners. Energy Education Science and Technology Part A: Energy Science and Research, 26 (1). pp. 1-11. ISSN 1308-772X,

Mahlia, Teuku Meurah Indra and Saidur, Rahman and Memon, Liaquat Ali and Zulkifli, N.W.M. and Masjuki, Haji Hassan (2010) A review on fuel economy standard for motor vehicles with the implementation possibilities in Malaysia. Renewable and Sustainable Energy Reviews, 14 (9). pp. 3092-3099. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2010.07.053.

Mahlia, Teuku Meurah Indra and Saidur, Rahman and Yanti, P.A.A. and Masjuki, Haji Hassan (2011) Role of energy guide labels in consumers purchase decision for household electrical appliances. Energy Education Science and Technology Part A: Energy Science and Research, 27 (1). pp. 95-104. ISSN 1308-772X,

Mahmood, Mohamad Syafie and Said, Suhana Mohd and Chatterjee, Abhijit and Sabri, Mohd Faizul Mohd and Mainal, Azizah and Daud, Mohammad Noh and Sairi, Nor Asrina (2018) DFT studies of structural–electronic correlation for the HAT6 discotic liquid crystal columnar stacking. Materials Research Express, 5 (12). p. 126306. ISSN 2053-1591, DOI https://doi.org/10.1088/2053-1591/aae11d.

Mahmoodian, R. and Hamdi, M. and Hassan, M.A. and Akbari, A. (2015) Mechanical and chemical characterization of a TiC/C system synthesized using a focus plasma arc. PLoS ONE, 10 (6). p. 10. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0130836.

Mahmoodian, R. and Rahbari, R.G. and Abd Shukor, Mohd Hamdi and Hassan, Mohamed Mohsen Abdel-Naeim and Sparham, M. (2013) The Effects of an unexpected ceramic coating phase at the head of a pipe on joining and postprocessing of a ceramic-lined composite pipe. JOM Journal of the Minerals, Metals and Materials Society, 65 (1). pp. 80-85. ISSN 1047-4838, DOI https://doi.org/10.1007/s11837-012-0498-7.

Mahmoodian, R. and Rahbari, R.G. and Abd Shukor, Mohd Hamdi and Sparham, M. (2012) Another attempt to adopt a machine for SHS lining ceramics inside pipes. High Temperature Material Processes. ISSN 1093-3611, DOI https://doi.org/10.1615/.2012004708. (In Press)

Mahmoodian, R.A.B. and Hassan, M.A.A.C. and Ghadirian, S.B. and Hamdi, M.A. (2014) Study of Ti+C combustion synthesis reaction in a controlled declining temperature state. Combustion Science and Technology, 186 (6). pp. 737-746. ISSN 1563521X, DOI https://doi.org/10.1080/00102202.2013.878705.

Maleque, Md Abdul and Masjuki, Haji Hassan and Haseeb, A.S. Md. Abdul (2000) Effect of mechanical factors on tribological properties of palm oil methyl ester blended lubricant. Wear, 239 (1). pp. 117-125. ISSN 0043-1648, DOI https://doi.org/10.1016/S0043-1648(00)00319-7.

Mallah, Abdul Rahman and Kazi, Salim Newaz and Zubir, Mohd Nashrul Mohd and Badarudin, Ahmad (2018) Blended morphologies of plasmonic nanofluids for direct absorption applications. Applied Energy, 229. pp. 505-521. ISSN 0306-2619, DOI https://doi.org/10.1016/j.apenergy.2018.07.113.

Mallah, Abdul Rahman and Zubir, Mohd Nashrul Mohd and Alawi, Omer A. and Kazi, Md Salim Newaz and Ahmed, Syed M. and Oon, Cheen Sean and Mohamad, Ahmad Badarudin (2020) An innovative, high-efficiency silver/silica nanocomposites for direct absorption concentrating solar thermal power. International Journal of Energy Research, 44 (12, SI). pp. 9438-9453. ISSN 0363-907X, DOI https://doi.org/10.1002/er.4994.

Mamat, Azuddin and Yap, Hwa Jen and Tan, Chee Hau and Muhammad Asri, Muhammad Basril (2022) Fixture design for outer skin aircraft door manual drilling operation with finite element analysis and ergonomic consideration. Advances in Materials Science and Engineering, 2022. ISSN 1687-8434, DOI https://doi.org/10.1155/2022/4236629.

Mamun, M.A.H. and Rahman, M.M. and Billah, M.M. and Saidur, Rahman (2010) A numerical study on the effect of a heated hollow cylinder on mixed convection in a ventilated cavity. International Communications in Heat and Mass Transfer, 37 (9). pp. 1326-1334. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2010.07.019.

Mamun, M.A.H. and Tanim, T.R. and Rahman, M.M. and Saidur, Rahman and Nagata, S. (2010) Mixed convection analysis in trapezoidal cavity with a moving lid. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 18-28. ISSN 1823-0334,

Manikandan, Munia Samy and Ratnavelu, Kurunathan and Balasubramaniam, Pagavathigounder and Ong, Seng Huat (2021) Synchronization of cohen-grossberg fuzzy cellular neural networks with time-varying delays. International Journal of Nonlinear Sciences and Numerical Simulation, 22 (1). pp. 45-58. ISSN 1565-1339, DOI https://doi.org/10.1515/ijnsns-2019-0256.

Manladan, Sunusi Marwana and Zhang, Y. and Ramesh, Singh and Cai, Yang Chuan and Ao, Sansan and Luo, Zhen (2019) Resistance element welding of magnesium alloy and austenitic stainless steel in three-sheet configurations. Journal of Materials Processing Technology, 274. p. 116292. ISSN 0924-0136, DOI https://doi.org/10.1016/j.jmatprotec.2019.116292.

Manladan, Sunusi Marwana and Zhang, Y. and Ramesh, Singh and Cai, Yang Chuan and Luo, Zhen and Ao, Sansan and Arslan, A. (2019) Resistance element weld-bonding and resistance spot weld-bonding of Mg alloy/austenitic stainless steel. Journal of Manufacturing Processes, 48. pp. 12-30. ISSN 1526-6125, DOI https://doi.org/10.1016/j.jmapro.2019.10.005.

Mannan, Abdul and Sabri, Mohd Faizul Mohd and Kalam, Md. Abul and Masjuki, Haji Hassan (2019) Tribological Properties of Steel/Steel, Steel/DLC and DLC/DLC Contacts in the Presence of Biodegradable Oil. Journal of the Japan Petroleum Institute, 62 (1). pp. 11-18. ISSN 1346-8804, DOI https://doi.org/10.1627/jpi.62.11.

Mannan, Abdul and Sabri, Mohd Faizul Mohd and Kalam, Md. Abul and Masjuki, Haji Hassan (2018) Tribological performance of DLC/DLC and steel/DLC contacts in the presence of additivated oil. International Journal of Surface Science and Engineering, 12 (1). pp. 60-75. ISSN 1749-785X, DOI https://doi.org/10.1504/IJSURFSE.2018.090055.

Mansoor, Muhammad Adil and Lim, Su Pei and Yusof, Farazila and Ming, Huang Nay (2019) Propitious Escalation in Photocurrent Response from MnZnO3 Thin Films Using Methanol as Sacrificial Agent. Journal of Electronic Materials, 48 (7). pp. 4375-4380. ISSN 0361-5235, DOI https://doi.org/10.1007/s11664-019-07224-4.

Mansoor, Muhammad Adil and McKee, Vickie and Yusof, Farazila and Lim, S.P. and Zubir, Mohd Nashrul Mohd and Ming, Huang Nay and Mazhar, Muhammad Ehsan (2018) Lanthanum–titanium oxide composite from a single molecular cluster: Non-enzymatic mesoporous electrochemical nitrite ion sensor. Polyhedron, 156. pp. 332-341. ISSN 0277-5387, DOI https://doi.org/10.1016/j.poly.2018.09.045.

Mansoor, Muhammad Adil and Yusof, Farazila and Huang, Nay Ming (2019) Optimization of conditions for improved solar energy harvesting application by hydrothermally grown TiO2 nanorods. Journal of the Iranian Chemical Society, 16 (5). pp. 1113-1122. ISSN 1735-207X, DOI https://doi.org/10.1007/s13738-018-01586-y.

Mansor, Muhammad Safwan Mohd and Raja, Sufian and Yusof, Farazila and Muhamad, Mohd Ridha and Manurung, Yupiter HP. and Adenan, Mohd Shahriman and Hussein, Nur Izan Syahriah and Ren, James (2024) Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies. Journal of Materials Research and Technology-JMR&T, 30. pp. 2478-2499. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2024.03.170.

Mansor, Muhammad Safwan Mohd and Yusof, Farazila and Ariga, Tadashi and Miyashita, Yukio (2018) Microstructure and mechanical properties of micro-resistance spot welding between stainless steel 316L and Ti-6Al-4V. The International Journal of Advanced Manufacturing Technology, 96 (5-8). pp. 2567-2581. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-018-1688-4.

Mardziah, C. M. and Ramesh, S. and Wahid, M. F. Abdul and Chandran, Hari and Sidhu, Amritpal and Krishnasamy, S. and Purbolaksono, J. (2020) Effect of zinc ions on the structural characteristics of hydroxyapatite bioceramics. Ceramics International, 46 (9). pp. 13945-13952.

Marzougui, Basma and Smida, Youssef Ben and Marzouki, Riadh and Onwudiwe, Damian C. and Al-Douri, Y. and Hamzaoui, Ahmed Hichem (2023) Combustion synthesis, characterization, and photodegradation performance of La2-xBixCuO4. Solid State Communications, 364. ISSN 0038-1098, DOI https://doi.org/10.1016/j.ssc.2023.115113.

Mas Ayu, Hassan and Izman, Sudin and Daud, Rosdi and Shah, Arman and Anwar, Mahmood and Krishnamurithy, Genasan and Kamarul, Tunku (2017) In-vitro biocompatibility study of hydroxyapatite coated on Co-Cr-Mo with oxide interlayer. Jurnal Teknologi, 80 (1). pp. 35-42. ISSN 0127-9696, DOI https://doi.org/10.11113/jt.v80.10368.

Masjuki, Haji Hassan and Mahlia, T.M.I. and Choudhury, I.A. and Saidur, Rahman (2002) Potential CO2 reduction by fuel substitution to generate electricity in Malaysia. Energy Conversion and Management, 43 (6). pp. 763-770. ISSN 0196-8904, DOI https://doi.org/10.1016/s0196-8904(01)00074-7.

Masjuki, Haji Hassan and Saidur, Rahman and Choudhury, Imtiaz Ahmed and Mahlia, T.M. Indra and Ghani, A.K. and Maleque, M.A. (2001) The applicability of ISO household refrigerator–freezer energy test specifications in Malaysia. Energy, 26 (7). pp. 723-737. ISSN 0360-5442, DOI https://doi.org/10.1016/S0360-5442(01)00028-7.

Masmiati, N. and Sarhan, A.A.D. (2015) Optimizing cutting parameters in inclined end milling for minimum surface residual stress - Taguchi approach. Measurement, 60. pp. 267-275. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2014.10.002.

Masoud, Fathi and Sapuan, S. M. and Ariffin, Mohd Khairol Anuar Mohd and Nukman, Y. and Bayraktar, Emin (2021) Experimental analysis of kerf taper angle in cutting process of sugar palm fiber reinforced unsaturated polyester composites with laser beam and abrasive water jet cutting technologies. Polymers, 13 (15). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13152543.

Masoud, Fathi and Sapuan, S. M. and Ariffin, Mohd Khairol Anuar Mohd and Nukman, Yusoff and Bayraktar, Emin (2022) Experimental investigation on dimensional stability and cutting quality in cutting process of sugar palm fiber reinforced unsaturated polyester composites with laser beam and abrasive water jet cutting technologies. FIBERS AND POLYMERS, 23 (11). pp. 3179-3187. ISSN 1875-0052, DOI https://doi.org/10.1007/s12221-022-0165-8.

Masoud, Fathi and Sapuan, S. M. and Mohd Ariffin, Mohd Khairol Anuar and Nukman, Y. and Bayraktar, Emin (2020) Cutting processes of natural fiber-reinforced polymer composites. Polymers, 12 (6). ISSN 2073-4360, DOI https://doi.org/10.3390/POLYM12061332.

Masum, S.M. and Masjuki, Haji Hassan and Kalam, M.A. and Palash, S.M. and Habibullah, M. (2015) Effect of alcohol-gasoline blends optimization on fuel properties, performance and emissions of a SI engine. Journal of Cleaner Production, 86. pp. 230-237. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2014.08.032.

Mat, Zuraida Awang and Nadaraja, Shri Kumaran and Zakaria, Zulfirdaus and Abu Hassan, Saiful Hasmady and Yap, Boon Kar and Tan, Chou Yong and Somalu, Mahendra Rao (2019) Fabrication and characterization of YSZ/ScSZ bilayer electrolyte via Cold- Isostatic Pressing (CIP) method for intermediate temperature-solid oxide fuel cell (IT-SOFC) application. International Journal of Integrated Engineering, 11 (7). pp. 201-208. ISSN 2229-838X,

Matsuno, Takashi and Ueda, Yuya and Takahashi, Tomoya and Hama, Takayuki and Hojo, Tomohiko and Shibayama, Yuki and Muhamad, Mohd Ridha and Okitsu, Yoshitaka and Takamura, Masato (2024) Delayed fracture stress thresholds degraded by the shear punching process in ultra-high-strength steel sheets: Analysis using an in-plane bending test with numerical assimilation. Journal of Manufacturing Processes, 119. pp. 1005-1021. ISSN 1526-6125, DOI https://doi.org/10.1016/j.jmapro.2024.04.013.

Mazaheri, Hoora and Ong, Hwai Chyuan and Masjuki, Haji Hassan and Amini, Zeynab and Harrison, Mark D. and Wang, Chin Tsan and Kusumo, Fitranto and Alwi, Azham (2018) Rice bran oil based biodiesel production using calcium oxide catalyst derived from Chicoreus brunneus shell. Energy, 144. pp. 10-19. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2017.11.073.

Mazlan, Mohd Rhafiq and Jamadon, Nashrah Hani and Rajabi, Armin and Sulong, Abu Bakar and Mohamed, Intan Fadhlina and Yusof, Farazila and Jamal, Nur Ayuni (2023) Necking mechanism under various sintering process parameters-A review. Journal of Materials Research and Technology-JMR&T, 23. pp. 2189-2201. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2023.01.013.

Mazlan, Muhamad Farhan Mohd and Salleh, Siti Zuliana and Ab Karim, Mohd Sayuti and Abd Razak, Nasrul Anuar (2022) Design and development of automated dispensing machine as medical device-based application: A review. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 236 (18). pp. 10033-10050. ISSN 0954-4062, DOI https://doi.org/10.1177/09544062221099163.

Mazlan, Noratikah and Yazid, Haniza and Arof, Hamzah and Mohd Isa, Hazlita (2020) Automated microaneurysms detection and classification using multilevel thresholding and multilayer perceptron. Journal of Medical and Biological Engineering, 40 (2). pp. 292-306. ISSN 1609-0985, DOI https://doi.org/10.1007/s40846-020-00509-8.

Mazumder, Subhrojyoti and Metselaar, Hendrik Simon Cornelis and Sukiman, Nazatul Liana and Zulkifli, Nurin Wahidah Mohd (2023) Friction and wear behavior of fluoride added Si3N4-SiC ceramic composites at elevated temperature. Ceramics International, 49 (8). pp. 12787-12795. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2022.12.144.

Mazumder, Subhrojyoti and Metselaar, Hendrik Simon Cornelis and Sukiman, Nazatul Liana and Zulkifli, Nurin Wahidah Mohd (2020) An overview of fluoride-based solid lubricants in sliding contacts. Journal of the European Ceramic Society, 40 (15). pp. 4974-4996. ISSN 0955-2219, DOI https://doi.org/10.1016/j.jeurceramsoc.2020.04.046.

Md Dawal, Siti Zawiah and Ismail, Z. and Yusuf, K. and Abdul-Rashid, S.H. and Shalahim, N.S.M. and Abdullah, N.S. and Kamil, N.S.M. (2015) Determination of the significant anthropometry dimensions for user-friendly designs of domestic furniture and appliances - Experience from a study in Malaysia. Measurement, 59. pp. 205-215. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2014.09.030.

Md Nasir, Khairunisa and Ramli Sulong, Nor Hafizah and Fateh, Talal and Johan, Mohd Rafie and Afifi, Amalina Muhammad (2019) Combustion of waterborne intumescent flame-retardant coatings with hybrid industrial filler and biofiller. Journal of Coatings Technology and Research, 16 (2). pp. 543-553. ISSN 1547-0091, DOI https://doi.org/10.1007/s11998-018-0136-6.

Md Nasir, Khairunisa and Ramli Sulong, Nor Hafizah and Johan, Mohd Rafie and Afifi, Amalina Muhammad (2018) An investigation into waterborne intumescent coating with different fillers for steel application. Pigment & Resin Technology, 47 (2). pp. 142-153. ISSN 0369-9420, DOI https://doi.org/10.1108/PRT-09-2016-0089.

Megat Hasnan, Megat Muhammad Ikhsan and Said, Suhana Mohd and Sabri, Mohd Faizul Mohd and Mat Hussin, Siti Amira and Abdullah, Norbani and Nik Ibrahim, Nik Muhd Jazli and Miyazaki, Yuzuru and Salleh, Faiz and Shah, Noraisyah Mohamed (2019) Optimised thermally driven molecular stability of an SCO metal complex for TEC Seebeck generation enhancement. RSC Advances, 9 (19). pp. 10626-10634. ISSN 2046-2069, DOI https://doi.org/10.1039/C9RA00779B.

Mehboob, Hassan and Tarlochan, Faris and Mehboob, Ali and Chang, Seung-Hwan and Ramesh, S. and Harun, Wan Sharuzi Wan and Kadirgama, Kumaran (2020) A novel design, analysis and 3D printing of Ti-6Al-4V alloy bio-inspired porous femoral stem. Journal of Materials Science-Materials in Medicine, 31 (9). ISSN 0957-4530, DOI https://doi.org/10.1007/s10856-020-06420-7.

Mehrali, M. and Sadeghinezhad, E. and Akhiani, A.R. and Latibari, S.T. and Talebian, S. and Dolatshahi-Pirouz, A. and Metselaar, H.S.C. and Mehrali, M. (2016) An ecofriendly graphene-based nanofluid for heat transfer applications. Journal of Cleaner Production, 137. pp. 555-566. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2016.07.136.

Mehrali, M. and Sadeghinezhad, E. and Rashidi, M.M. and Akhiani, A.R. and Latibari, S.T. and Mehrali, M. and Metselaar, H.S.C. (2015) Experimental and numerical investigation of the effective electrical conductivity of nitrogen-doped graphene nanofluids. Journal of Nanoparticle Research, 17 (6). p. 17. ISSN 1388-0764, DOI https://doi.org/10.1007/s11051-015-3062-x.

Mehran, Q.M. and Bushroa, Abdul Razak and Fazal, M.A. (2015) Evaluation of CrAlN multilayered coatings deposited by PVD magnetron sputtering. Journal of Adhesion Science and Technology, 29 (19). pp. 2076-2089. ISSN 0169-4243, DOI https://doi.org/10.1080/01694243.2015.1054577.

Mekhilef, Saad and Saidur, Rahman and Safari, Azadeh (2012) Comparative study of different fuel cell technologies. Renewable and Sustainable Energy Reviews, 16 (1). pp. 981-989. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2011.09.020.

Mekhilef, Saad and Saidur, Rahman and Safari, Azadeh (2011) A review on solar energy use in industries. Renewable and Sustainable Energy Reviews, 15 (4). pp. 1777-1790. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2010.12.018.

Mekhilef, Saad and Saidur, Rahman and Safari, Azadeh and Mustaffa, W.E.S.B. (2011) Biomass energy in Malaysia: current state and prospects. Renewable and Sustainable Energy Reviews, 15 (7). pp. 3360-3370. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2011.04.016.

Mekhilef, Saad and Siga, S. and Saidur, Rahman (2011) A review on palm oil biodiesel as a source of renewable fuel. Renewable and Sustainable Energy Reviews, 15 (4). pp. 1937-1949. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2010.12.012.

Memon, Mudasir Ahmed and Siddique, Marif Daula and Mekhilef, Saad and Mubin, Marizan (2022) Asynchronous particle swarm optimization-genetic algorithm (APSO-GA) based selective harmonic elimination in a cascaded h-bridge multilevel inverter. IEEE Transactions on Industrial Electronics, 69 (2). pp. 1477-1487. ISSN 0278-0046, DOI https://doi.org/10.1109/TIE.2021.3060645.

Mesbah, M. and Fadaeifard, F. and Nasiri-Tabrizi, B. and Matori, K. A. and Basirun, W. J. (2021) The impacts of grain boundary on the scattering of intermetallics in friction-stir-welded AA6061-T6. Materials Letters, 300. ISSN 0167-577X, DOI https://doi.org/10.1016/j.matlet.2021.130206.

Mesbah, M. and Faraji, G. and Bushroa, Abdul Razak (2014) Characterization of nanostructured pure aluminum tubes produced by tubular channel angular pressing (TCAP). Materials Science and Engineering: A, 590. pp. 289-294. ISSN 0921-5093, DOI https://doi.org/10.1016/j.msea.2013.10.036.

Mesbah, M. and Fattahi, A. and Bushroa, Abdul Razak and Faraji, G. and Wong, K. Y. and Basirun, Wan Jefrey and Fallahpour, A. and Nasiri-Tabrizi, B. (2021) Experimental and modelling study of ultra-fine grained zk60 magnesium alloy with simultaneously improved strength and ductility processed by parallel tubular channel angular pressing. Metals and Materials International, 27 (2). pp. 277-297. ISSN 1598-9623, DOI https://doi.org/10.1007/s12540-019-00495-w.

Milano, Jassinnee and Ong, Hwai Chyuan and Masjuki, Haji Hassan and Silitonga, Arridina Susan and Chen, Wei-Hsin and Kusumo, Fitranto and Dharma, Surya and Sebayang, Abdi Hanra (2018) Optimization of biodiesel production by microwave irradiation-assisted transesterification for waste cooking oil-Calophyllum inophyllum oil via response surface methodology. Energy Conversion and Management, 158. pp. 400-415. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2017.12.027.

Milano, Jassinnee and Ong, Hwai Chyuan and Masjuki, Haji Hassan and Silitonga, Arridina Susan and Kusumo, Fitranto and Dharma, Surya and Sebayang, Abdi Hanra and Cheah, Mei Yee and Wang, Chin Tsan (2018) Physicochemical property enhancement of biodiesel synthesis from hybrid feedstocks of waste cooking vegetable oil and Beauty leaf oil through optimized alkaline-catalysed transesterification. Waste Management, 80. pp. 435-449. ISSN 0956-053X, DOI https://doi.org/10.1016/j.wasman.2018.09.005.

Mirhassani, S. and Ong, Hwai Chyuan and Chong, W.T. and Leong, K.Y. (2015) Advances and challenges in grid tied photovoltaic systems. Renewable and Sustainable Energy Reviews, 49. pp. 121-131. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.04.064.

Misran, Halina and Salim, Musdalilah Ahmad and Ramesh, Singh (2018) Effect of Ag nanoparticles seeding on the properties of silica spheres. Ceramics International, 44 (6). pp. 5901-5908. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2017.12.118.

Mofijur, M. and Masjuki, Haji Hassan and Kalam, M.A. and Rahman, S.M.A. and Mahmudul, H.M. (2015) Energy scenario and biofuel policies and targets in ASEAN countries. Renewable and Sustainable Energy Reviews, 46. pp. 51-61. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.02.020.

Moghadasi, Kaveh and Isa, Mohammad Syahid Mohd and Ariffin, Mohammad Ashraf and Jamil, Muhammad Zulhiqmi Mohd and Raja, Sufian and Wu, Bo and Yamani, Mehrdad and Muhamad, Mohd Ridha and Yusof, Farazila and Jamaludin, Mohd Fadzil and Ab Karim, Mohd Sayuti and Abdul Razak, Bushroa and Yusoff, Nukman (2022) A review on biomedical implant materials and the effect of friction stir based techniques on their mechanical and tribological properties. Journal of Materials Research and Technology-JMR&T, 17. pp. 1054-1121. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2022.01.050.

Mohamad, Farah Fazlinda and Abdullah, Ahmad Saifizul and Mohamad, Jamilah (2019) Are sociodemographic characteristics and attitude good predictors of speeding behavior among drivers on Malaysia federal roads? Traffic Injury Prevention, 20 (5). pp. 478-483. ISSN 1538-9588, DOI https://doi.org/10.1080/15389588.2019.1612057.

Mohamad Elias, Mohamad Fathi and Abd Rahim, Nasrudin and Rosli, Nur Farhana (2023) A three-phase hybrid multilevel inverter with enhanced pulse-width modulation strategy. IEEE Transactions on Power Electronics, 38 (4). pp. 4714-4726. ISSN 0885-8993, DOI https://doi.org/10.1109/TPEL.2022.3228546.

Mohamad Saadon, Nurul Salwani and Hamzaid, Nur Azah and Hasnan, Nazirah and Dzulkifli, Muhammad Afiq and Teoh, Mira Xiao Hui and Davis, Glen Macartney (2022) Mechanomyography and tissue oxygen saturation during electrically-evoked wrist extensor fatigue in people with tetraplegia. Artificial Organs, 46 (10). pp. 1998-2008. ISSN 0160-564X, DOI https://doi.org/10.1111/aor.14329.

Mohamad Zaidi, Umi Zalilah and Bushroa, Abdul Razak and Ghahnavyeh, Reza Rahbari and Mahmoodian, Reza (2019) Crystallite size and microstrain: XRD line broadening analysis of AgSiN thin films. Pigment & Resin Technology, 48 (6). pp. 473-480. ISSN 0369-9420, DOI https://doi.org/10.1108/PRT-03-2018-0026.

Mohamad Zaidi, Umi Zalilah and Mahmoodian, Reza and Bushroa, Abd Razak and Vellasamy, Kumutha Malar (2019) Surface modification of Ti64-Alloy with silver silicon nitride thin films. Journal of Adhesion Science and Technology, 33 (22). pp. 2476-2493. ISSN 0169-4243, DOI https://doi.org/10.1080/01694243.2019.1646462.

Mohamad-Ali, Nurhasyimah and Ghazilla, Raja Ariffin Raja and Abdul-Rashid, Salwa Hanim and Sakundarini, Novita and Ahmad-Yazid, Aznijar and Stephenie, Lydyaty (2018) End-of-life vehicle recovery factors: Malaysian stakeholders' views and future research needs. Sustainable Development, 26 (6). pp. 713-725. ISSN 0968-0802, DOI https://doi.org/10.1002/sd.1741.

Mohamad-Ali, Nurhasyimah and Raja Ghazilla, Raja Ariffin and Abdul-Rashid, Salwa Hanim and Ahmad-Yazid, Aznijar (2019) Aftermarket survey on end-of-life vehicle recovery in Malaysia: Key findings. Journal of Cleaner Production, 211. pp. 468-480. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2018.11.165.

Mohamad-Ali, Nurhasyimah and Saman, Muhamad Zameri Mat and Ghazilla, Raja Ariffin Raja (2024) A model for end-of-life recovery in the automotive sector in Malaysia. Sustainable Production and Consumption, 46. pp. 180-194. ISSN 2352-5509, DOI https://doi.org/10.1016/j.spc.2024.02.020.

Mohamaddan, Shahrol and Ishak, N.Z. and Aizuddin, Abang Mohamad and Yamamoto, Shinichiro Ichiroh and Md Dawal, Siti Zawiah and Safawi, E.B. and Khamis, Herman (2018) Design and analysis of ankle foot orthosis for disabled children. Journal of Advanced Manufacturing Technology, 12 (1 (2)). pp. 247-258. ISSN 1985-3157,

Mohamaddan, Shahrol and Ishak, N.Z. and Shanat, Musdi and Md Dawal, Siti Zawiah (2018) Development of an ankle foot orthosis for hemiplegic children. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-16). pp. 103-106. ISSN 2180-1843,

Mohamaddan, Shahrol and Rasit, Ahmad Hata and Md Dawal, Siti Zawiah (2018) Design of mechanical bracing device for clubfoot treatment. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-16). pp. 91-95. ISSN 2180-1843,

Mohamed Haneef, Intan Najwa Humaira and Shaffiar, Norhashimah and Buys, Yose Fachmi and Abd Hamid, Abdul Malek (2019) Finite element analysis (FEA) of polylactic acid/polypropylene carbonate (PLA/PPC) blends fixation plate for craniomaxillofacial surgery. International Journal of Structural Integrity, 10 (5). pp. 678-691. ISSN 1757-9864, DOI https://doi.org/10.1108/IJSI-05-2019-0048.

Mohammadi, Hossein and Beddu, Salmia and Petra, Michal and Sepantafar, Mohammadmajid and Ebadi, Mona and Yap, Boon Kar and Bang, Le Thi and Yong, Tan Chou and Ramesh, Singh and Koloor, Seyed Saeid Rahimian (2024) Advances in silicon nitride ceramic biomaterials for dental applications - A review. Journal of Materials Research and Technology-JMR&T, 28. pp. 2778-2791. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2023.12.186.

Mohammadi, M. and Musa, S.N. and Bahreininejad, A. (2015) Optimization of economic lot scheduling problem with backordering and shelf-life considerations using calibrated metaheuristic algorithms. Applied Mathematics and Computation, 251. pp. 404-422. ISSN 0096-3003, DOI https://doi.org/10.1016/j.amc.2014.11.035.

Mohammadi Arvanag, Farid and Bayrami, Abolfazl and Habibi-Yangjeh, Aziz and Rahim Pouran, Shima (2019) A comprehensive study on antidiabetic and antibacterial activities of ZnO nanoparticles biosynthesized using Silybum marianum L seed extract. Materials Science and Engineering: C, 97. pp. 397-405. ISSN 0928-4931, DOI https://doi.org/10.1016/j.msec.2018.12.058.

Mohammadnejad, M. and Ghazvini, M. and Javadi, F.S. and Saidur, Rahman (2011) Estimating the exergy efficiency of engine using nanolubricants. Energy Education Science and Technology Part A: Energy Science and Research, 27 (2). pp. 447-454. ISSN 1308-772X,

Mohammed, H.A. and Al-Aswadi, A.A. and Shuaib, N.H. and Saidur, Rahman (2011) Convective heat transfer and fluid flow study over a step using nanofluids: A review. Renewable and Sustainable Energy Reviews, 15 (6). pp. 2921-2939. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2011.02.019.

Mohammed, H.A. and Al-Aswadi, A.A. and Yusoff, M.Z. and Saidur, Rahman (2012) Buoyancy-assisted mixed convective flow over backward-facing step in a vertical duct using nanofluids. Thermophysics and Aeromechanics, 19 (1). pp. 33-52. ISSN 0869-8643, DOI https://doi.org/10.1134/s0869864312010040.

Mohammed, H.A. and Bhaskaran, G. and Shuaib, N.H. and Abu-Mulaweh, H.I. and Saidur, Rahman (2012) Thermal and hydrodynamic performance analysis of circular microchannel heat exchanger utilizing nanofluids. International Journal of Numerical Methods for Heat & Fluid Flow, 22 (7). pp. 907-927. ISSN 0961-5539, DOI https://doi.org/10.1108/09615531211255789.

Mohammed, H.A. and Bhaskaran, G. and Shuaib, N.H. and Saidur, Rahman (2011) Heat transfer and fluid flow characteristics in microchannels heat exchanger using nanofluids: A review. Renewable and Sustainable Energy Reviews, 15 (3). pp. 1502-1512. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2010.11.031.

Mohammed, H.A. and Bhaskaran, G. and Shuaib, N.H. and Saidur, Rahman (2011) Numerical study of heat transfer enhancement of counter nanofluids flow in rectangular microchannel heat exchanger. Superlattices and Microstructures, 50 (3). pp. 215-233. ISSN 0749-6036, DOI https://doi.org/10.1016/j.spmi.2011.06.003.

Mohammed, H.A. and Campo, A. and Saidur, Rahman (2010) Experimental study of forced and free convective heat transfer in the thermal entry region of horizontal concentric annuli. International Communications in Heat and Mass Transfer, 37 (7). pp. 739-747. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2010.04.007.

Mohammed, H.A. and Om, N.I. and Shuaib, N.H. and Hussein, A.K. and Saidur, Rahman (2011) The application of nanofluids on three dimensional mixed convection heat transfer in equilateral triangular duct. International Journal of Heat and Technology, 29 (2). pp. 3-12. ISSN 03928764,

Mohammed, H.A. and Om, N.I. and Shuaib, N.H. and Saidur, Rahman (2011) Heat transfer enhancement for combined convection flow of nanofluids in a vertical rectangular duct considering radiation effects. Heat Transfer - Asian Research, 40 (5). pp. 448-463. ISSN 10992871, DOI https://doi.org/10.1002/htj.20354.

Mohammed, I.Y. and Abakr, Y.A. and Yusup, S. and Alaba, P.A. and Morris, K.I. and Sani, Y.M. and Kazi, F.K. (2017) Upgrading of Napier grass pyrolytic oil using microporous and hierarchical mesoporous zeolites: Products distribution, composition and reaction pathways. Journal of Cleaner Production, 162. pp. 817-829. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2017.06.105.

Mohanty, Asit and Ray, Prakash K. and Das, Soumya Ranjan and Soudagar, Manzoore Elahi M. and Ramesh, Singh and Khan, T.M. Yunus and Almakayeel, Naif and Ali, M. Mahmood and Bashir, Muhammad Nasir (2024) Enhancing power quality in contemporary utility systems: A comprehensive analysis of active power filters and control strategies. Energy Reports, 11. pp. 5575-5592. ISSN 2352-4847, DOI https://doi.org/10.1016/j.egyr.2024.05.033.

Mohd Amran, Nor Amirah and Ab Karim, Mohd Sayuti and Abd Rashid, Rusdi and Tuan Zahari, Tuan Zaharinie and Ishak, Amirul Latif (2019) Improvement of Methadone Maintenance Treatment (MMT) Process Through Development and Implementation of Methadone Dispenser. Journal of Testing and Evaluation, 47 (5). p. 20180094. ISSN 0090-3973, DOI https://doi.org/10.1520/JTE20180094.

Mohd Joharudin, Nurul Farahin and Abdul Latif, Noradila and Mustapa, Mohammad Sukri and Mansor, M.N. and Siswanto, Waluyo Adi and Murugesan, Jayaprakash and Yusof, Farazila (2019) Effect of amorphous silica by rice husk ash on physical properties and microstructures of recycled aluminium chip AA7075. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 283-288. ISSN 0933-5137, DOI https://doi.org/10.1002/mawe.201800229.

Mohd Yasin, Siti Mariah and Badruddin, Irfan Anjum and Johan, Mohd Rafie (2019) Super Stability of Ag Nanoparticle in Crystalline Lamellar (Lc) Liquid Crystal Matrix at Different pH Environment. Symmetry, 12 (1). p. 31. ISSN 2073-8994, DOI https://doi.org/10.3390/SYM12010031.

Mohd Yasin, Siti Mariah and Johan, Mohd Rafie (2019) Optical and thermal characterization of silver nanoparticles dispersion in lamellar liquid crystal matrix. Optik, 176. pp. 593-599. ISSN 0030-4026, DOI https://doi.org/10.1016/j.ijleo.2018.09.052.

Mohd Yunos, Afiqah and Omar, Ghazali and Salim, Mohd Azli and Masripan, Nor Azmmi and Cosut, Bunyemin and Mohd Adnan, Ahmad Faris (2020) Temperature Dependence on Silver Conductivity and Adhesion Performance Between Silver and Flexible Substrate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 73 (2). pp. 73-87. ISSN 2289-7879, DOI https://doi.org/10.37934/ARFMTS.73.2.7387.

Mohiuddin, A.K.M. and Saidur, Rahman and Sattar, M.A. and Rahman, A. (2007) Comparison of drift eliminators characteristics in evaporative condenser and spray-filled tower. International Energy Journal, 8 (3). pp. 155-162. ISSN 1513718X,

Mohseni, E. and Zalnezhad, E. and Bushroa, A.R. (2014) Comparative investigation on the adhesion of hydroxyapatite coating on Ti–6Al–4V implant: A review paper. International Journal of Adhesion and Adhesives, 48. pp. 238-257. ISSN 0143-7496, DOI https://doi.org/10.1016/j.ijadhadh.2013.09.030.

Monajemi, H. and Mazinani, I. and Chao, O.Z. and Yee, K.S. and Kuan, K.K. and Karim, R. (2015) Using local stiffness indicator to examine the effect of honeycombs on the flexural stiffness of reinforced concrete beams. Measurement, 64. pp. 157-162. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2014.12.051.

Montazer, Elham and Salami, Erfan and Yarmand, Hooman and Chowdhury, Zaira Zaman and Dahari, Mahidzal and Kazi, Salim Newaz and Badarudin, Ahmad (2018) Development of a new density correlation for carbon-based nanofluids using response surface methodology. Journal of Thermal Analysis and Calorimetry, 132 (2). pp. 1399-1407. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-018-6978-4.

Moradikazerouni, Alireza and Hajizadeh, Ahmad and Safaei, Mohammad Reza and Afrand, Masoud and Yarmand, Hooman and Zulkifli, Nurin Wahidah Mohd (2019) Assessment of thermal conductivity enhancement of nano-antifreeze containing single-walled carbon nanotubes: Optimal artificial neural network and curve-fitting. Physica A: Statistical Mechanics and its Applications, 521. pp. 138-145. ISSN 0378-4371, DOI https://doi.org/10.1016/j.physa.2019.01.051.

Moshwan, R. and Rahmat, S.M. and Yusof, F. and Hassan, M.A. and Hamdi, M. and Fadzil, M. (2015) Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy. International Journal of Materials Research, 106 (3). pp. 258-266. ISSN 1862-5282, DOI https://doi.org/10.3139/146.111172.

Moshwan, Raza and Yusof, Farazila and Hassan, Mohamed Mohsen Abdel-Naeim and Rahmat, Sahifulddin M. (2015) Effect of tool rotational speed on force generation, microstructure and mechanical properties of friction stir welded Al-Mg-Cr-Mn (AA 5052-O) alloy. Materials & Design, 66. pp. 118-128. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2014.10.043.

Mostafizur, R.M. and Saidur, Rahman and Abdul Raman, Abdul Aziz and Bhuiyan, M.H.U. (2015) Thermophysical properties of methanol based Al2O3 nanofluids. International Journal of Heat and Mass Transfer, 85. pp. 414-419. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2015.01.075.

Mostakim, Khodadad and Hasanuzzaman, M. (2022) Global prospects, challenges and progress of photovoltaic thermal system. Sustainable Energy Technologies and Assessments, 53 (A). ISSN 2213-1388, DOI https://doi.org/10.1016/j.seta.2022.102426.

Mounis, Shawgi Y. A. and Azlan, Norsinnira Zainul and Sado, Fatai (2020) Assist-as-needed robotic rehabilitation strategy based on z-spline estimated functional ability. IEEE Access, 8. pp. 157557-157571. ISSN 2169-3536, DOI https://doi.org/10.1109/ACCESS.2020.3019450.

Mousavi, M. and Yap, Hwa Jen and Musa, S.N. and Md Dawal, Siti Zawiah (2017) A Fuzzy Hybrid GA-PSO Algorithm for Multi-Objective AGV Scheduling in FMS. International Journal of Simulation Modelling, 16 (1). pp. 58-71. ISSN 1726-4529, DOI https://doi.org/10.2507/IJSIMM16(1)5.368.

Mousavi, M. and Yap, Hwa Jen and Musa, S.N. and Tahriri, F. and Md Dawal, Siti Zawiah (2017) Multi-objective AGV scheduling in an FMS using a hybrid of genetic algorithm and particle swarm optimization. PLoS ONE, 12 (3). e0169817. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0169817.

Mt Aznam, Suazlan and Maruoka, Naru and Imai, Ryosuke and Mori, Shoji (2021) Process of liquid supply to heated surface by a honeycomb porous plate for critical heat flux enhancement. Journal of Thermal Science and Technology, 16 (3). ISSN 1880-5566, DOI https://doi.org/10.1299/jtst.2021jtst0041.

Mubin, A.S.A. and Ahmad, N. and Mamat, A. and Taha, Z. and Hasanuddin, I. (2015) CFD study of drag and lift of sepak takraw ball at different face orientations. Advances in Mechanical Engineering, 7 (1). p. 9. ISSN 1687-8132, DOI https://doi.org/10.1155/2014/369137.

Muhamad, M.R. and Zou, Y. and Sugiyama, H. (2016) Investigation of the finishing characteristics in an internal tube finishing process by magnetic abrasive finishing combined with electrolysis. Transactions of the Institute of Metal Finishing, 94 (3). pp. 159-165. ISSN 0020-2967, DOI https://doi.org/10.1080/00202967.2016.1162400.

Muhamad, Martini Ridha and Jamaludin, Mohd Fadzil and Sayuti, Mohd and Yusof, Farazila and Zou, Yan Hua (2018) Effects of electrolysis on magnetic abrasive finishing of AA6063-T1 tube internal surface using combination machining tool. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 442-452. ISSN 0933-5137, DOI https://doi.org/10.1002/mawe.201700266.

Mujtaba, M. A. and Cho, Haeng Muk and Masjuki, H. H. and Kalam, M. A. and Ong, Hang Cheng and Gul, M. and Harith, M. H. and Yusoff, M. N. A. M. (2020) Critical review on sesame seed oil and its methyl ester on cold flow and oxidation stability. Energy Reports, 6. pp. 40-54. ISSN 2352-4847, DOI https://doi.org/10.1016/j.egyr.2019.11.160.

Mujtaba, M. A. and Masjuki, H. H. and Kalam, M. A. and Noor, Fahad and Farooq, Muhammad and Ong, Hwai Chyuan and Gul, M. and Soudagar, Manzoore Elahi M. and Bashir, Shahid and Rizwanul Fattah, I. M. and Razzaq, L. (2020) Effect of additivized biodiesel blends on diesel engine poerformance, emission, tribological characteristics, and lubricant tribology. Energies, 13 (13). ISSN 1996-1073, DOI https://doi.org/10.3390/en13133375.

Mulkan, Andi and Zulkifli, Nurin Wahidah Mohd and Husin, Husni and Ahmadi, - and Dahlan, Irvan (2024) Performance and emissions assessment under full load operation of an unmodified diesel engine running on biodiesel-based waste cooking oil synthesized using JPW solid catalyst. Renewable Energy, 224. p. 120145. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2024.120145.

Munawar, Khadija and Mansoor, Muhammad Adil and Olmstead, Marilyn M. and Yusof, Farazila and Misran, Misni and Basirun, Wan Jefrey and Mazhar, Muhammad (2019) Pyrochlore-structured Y2Ti2O7–2TiO2 composite thin films for photovoltaic applications. Journal of the Australian Ceramic Society, 55 (4). pp. 921-932. ISSN 2510-1560, DOI https://doi.org/10.1007/s41779-019-00329-3.

Musa, Rabiu Muazu and Hassan, Isyaku and Abdullah, Mohamad Razali and Azmi, Mohd Nazri Latiff and Majeed, Anwar P. P. Abdul and Abu Osman, Noor Azuan (2022) A longitudinal analysis of injury characteristics among elite and amateur tennis players at different tournaments from electronic newspaper reports. Frontiers in Public Health, 10. ISSN 2296-2565, DOI https://doi.org/10.3389/fpubh.2022.835119.

Mustafa, Z. and Amin, I. and Nukman, Y. and Haider, N. and Haq, I. (2010) Laser cutting quality control of melamine using artificial neural networks. Asia Pacific Industrial Engineering and Management Systems Conference .

Muzhaimey, Syarif Syahrul Syazwan and Ghazali, Nik Nazri Nik and Zainon, Mohd Zamri and Badruddin, Irfan Anjum and Hussien, Mohamed and Kamangar, Sarfaraz and Ahammad, N. Ameer (2022) Numerical investigation of heat transfer enhancement in a microchannel with conical-shaped reentrant cavity. Mathematics, 10 (22). ISSN 2227-7390, DOI https://doi.org/10.3390/math10224330.

Mydin, Md Azree Othuman and Nawi, Mohd Nasrun Mohd and Mohamed, Othman and Sari, Marti Widya (2022) Mechanical properties of lightweight foamed concrete modified with magnetite (Fe3O4) nanoparticles. Materials, 15 (17). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15175911.

Naderi, Sadjad and Hassan, Mohamed Mohsen Abdel-Naeim and Bushroa, Abdul Razak (2015) Alternative methods to determine the elastoplastic properties of sintered hydroxyapatite from nanoindentation testing. Materials & Design, 67. pp. 360-368. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2014.11.030.

Nafi, Atikah Wan and Afifi, Amalina Muhammad and Abidin, Nor Ishida Zainal and Abdul Aziz, Noor Hidayah and Kalantari, Katayoon (2018) Effect of the Poly L-lactic Acid Coating on the Corrosion of Magnesium in Hank's Solution. Sains Malaysiana, 47 (1). pp. 169-179. ISSN 0126-6039, DOI https://doi.org/10.17576/jsm-2018-4701-20.

Nagaprasad, K.S. and Banapurmath, N.R. and Madhu, D. and Soudagar, Manzoore Elahi M. and Mujtaba, M.A. and Kalam, M.A. and Vadlamudi, Chandramouli and Krishnappa, Sanjay (2024) Emission characteristics of diesel engines fuelled with B20 with different DPF, DOC and EGR arrangements. International Journal of Ambient Energy, 45 (1). ISSN 0143-0750, DOI https://doi.org/10.1080/01430750.2023.2277308.

Nagata, Yoshihiro and Kato, Kiyotaka and Shishido, Takuma and Tsuchiya, Ao and Kitaoka, Sanji and Oshiro, Naoto and Nishi, Naomi and Nonaka, Naoki and Koike, Takayuki and Oike, Toshimitsu and Hayashi, Kenji and Kambe, Hiroshi and Okane, Toshimitsu and Muhammad, Khairi Faiz and Yoshida, Makoto (2024) Development of high-ductility and low-hot-tearing-susceptibility non-heat treatment Al-Mg-Mn-Based die casting alloy for automotive structural parts. International Journal of Metalcasting, 18 (1). pp. 46-59. ISSN 1939-5981, DOI https://doi.org/10.1007/s40962-023-01047-0.

Nair, S. R. and Oon, C. S. and Tan, M. K. and Mahalingam, Savisha and Manap, Abreeza and Kazi, Md. Salim Newaz (2022) Investigation of heat transfer performance within annular geometries with swirl-inducing fins using clove-treated graphene nanoplatelet colloidal suspension. Journal of Thermal Analysis and Calorimetry, 147 (24). pp. 14873-14890. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-022-11733-6.

Namasivayam, Darshan and Andriyana, Andri and Arifin, N. (2022) Finite element analysis of newly developed hip prosthesis: Finite-elemente-analyse einer neu entwickelten huftprothese. Materialwissenschaft und Werkstofftechnik, 53 (3). pp. 355-369. ISSN 0933-5137, DOI https://doi.org/10.1002/mawe.202000055.

Naqiuddin, Nor Haziq and Saw, Lip Huat and Yew, Ming Chian and Yusof, Farazila and Poon, Hiew Mun and Cai, Zuansi and Thiam, Hui San (2018) Numerical investigation for optimizing segmented micro-channel heat sink by Taguchi-Grey method. Applied Energy, 222. pp. 437-450. ISSN 0306-2619, DOI https://doi.org/10.1016/j.apenergy.2018.03.186.

Narrein, K. and Sivasankaran, S. and Ganesan, P. (2015) Two-phase analysis of a helical microchannel heat sink using nanofluids. Numerical Heat Transfer, Part A: Applications, 68 (11). pp. 1266-1279. ISSN 1040-7782, DOI https://doi.org/10.1080/10407782.2015.1032017.

Nasiri-Tabrizi, B. and Zalnezhad, E. and Pingguan-Murphy, Belinda and Basirun, Wan Jefrey and Hamouda, A.M.S. and Baradaran, S. (2015) Structural and morphological study of mechanochemically synthesized crystalline nanoneedles of Zr-doped carbonated chlorapatite. Materials Letters, 149. pp. 100-104. ISSN 0167-577X, DOI https://doi.org/10.1016/j.matlet.2015.02.125.

Naskar, Jishnu and Boatemaa, Mercy Adusei and Rumjit, Nelson Pynadathu and Thomas, George and George, P. J. and Lai, Chin Wei and Mousavi, Seyyed Mojtaba and Wong, Yew Hoong (2022) Recent advances of nanotechnology in mitigating emerging pollutants in water and wastewater: Status, challenges, and opportunities. Water Air and Soil Pollution, 233 (5). ISSN 0049-6979, DOI https://doi.org/10.1007/s11270-022-05611-y.

Natasha, Ahmad Nawawi and Ramesh, Singh and Tan, Chou Yong (2018) Calcium phosphate nanoparticles prepared via solid-state route. International Journal of Engineering & Technology, 7 (4). pp. 80-83. ISSN 2227-524X,

Natashah, Fadlan Arif and Lin, Chong Jeng and Hishamuddin, Syaza Nafisah and Coffey, Aidan H. and Zhu, Chenhui and Bawazeer, Tahani M. and Alsoufi, Mohammad S. and Roslan, Nur Adilah and Supangat, Azzuliani (2024) Thermally evaporated vanadium-based phthalocyanine for low moisture detection in humidity sensors. Materials Today Communications, 38. ISSN 2352-4928, DOI https://doi.org/10.1016/j.mtcomm.2024.108033.

Nath, Amit Ranjan and Yehye, Wageeh Abdulhadi and Zulkifli, Nurin Wahidah Mohd and Johan, Mohd Rafie (2018) Ester of thiolated butylated hydroxytoluene: Potential antioxidant for synthetic lubricant oil. Thermochimica Acta, 670. pp. 7-12. ISSN 0040-6031, DOI https://doi.org/10.1016/j.tca.2018.09.021.

Naureen, Bushra and Haseeb, A. S. M. A. and Basirun, Wan Jefrey and Muhamad, Farina (2021) Recent advances in tissue engineering scaffolds based on polyurethane and modified polyurethane. Materials Science and Engineering: C, 118. ISSN 0928-4931, DOI https://doi.org/10.1016/j.msec.2020.111228.

Naureen, Bushra and Haseeb, A. S. M. A. and Basirun, Wan Jefrey and Muhamad, Farina (2021) Synthesis and degradation of 3D biodegradable polyurethane foam scaffolds based on poly (propylene fumarate) and poly (R)-3-hydroxybutyrate]. Materials Today Communications, 28. ISSN 2352-4928, DOI https://doi.org/10.1016/j.mtcomm.2021.102536.

Nejad, Ali Farokhi and Al-Fatlwe, Fatima Mohammed K. and Koloor, Seyed Saeid Rahimian and Alipour, Roozbeh and Davoudi, Mohammadmahdi and Hamdi, Mohd and Tamin, Mohd Nasir (2022) Design of a novel creep testing machine to investigate the creep life history of austenitic steel foil at elevated temperature. Fatigue & Fracture of Engineering Materials & Structures, 45 (9). pp. 2563-2575. ISSN 8756-758X, DOI https://doi.org/10.1111/ffe.13769.

Nekoonam, Ali and Nasab, Reza Fatehi and Jafari, Soheil and Nikolaidis, Theoklis and Ale Ebrahim, Nader and Fashandi, Seyed Alireza Miran (2023) A scientometric methodology based on co-word analysis in gas turbine maintenance. Technical gazette, 30 (1). pp. 361-372. ISSN 1330-3651, DOI https://doi.org/10.17559/TV-20220118165828.

Nezhad, Erfan Zal and Sarraf, Masoud and Musharavati, Farayi and Jaber, Fadi and Wang, Ji and Hosseini, Hamid Reza Madaah and Bae, Sungchul and Chowdhury, Muhammad and So, Hongyun and Sukiman, Nazatul Liana (2022) Effect of zirconia nanotube coating on the hydrophilicity and mechanochemical behavior of zirconium for biomedical applications. Surfaces and Interfaces, 28. ISSN 2468-0230, DOI https://doi.org/10.1016/j.surfin.2021.101623.

Ng, Jen Chao and Tan, Chou Yong and Ong, Boon Hoong and Matsuda, Atsunori and Basirun, Wan Jefrey and Tan, Wai Kian and Ramesh, Singh and Yap, Boon Kar (2019) Novel palladium-guanine-reduced graphene oxide nanocomposite as efficient electrocatalyst for methanol oxidation reaction. Materials Research Bulletin, 112. pp. 213-220. ISSN 0025-5408, DOI https://doi.org/10.1016/j.materresbull.2018.12.029.

Ng, Jen Chao and Tan, Chou Yong and Ong, Boon Hoong and Matsuda, Atsunori and Basirun, Wan Jefrey and Tan, Wai Kian and Ramesh, Singh and Yap, Boon Kar (2019) Nucleation and growth controlled reduced graphene oxide–supported palladium electrocatalysts for methanol oxidation reaction. Nanomaterials and Nanotechnology, 9. p. 184798041982717. ISSN 1847-9804, DOI https://doi.org/10.1177/1847980419827171.

Niranjan, H. and Sivasankaran, S. and Bhuvaneswari, M. (2016) Analytical and Numerical Study on Magnetoconvection Stagnation-Point Flow in a Porous Medium with Chemical Reaction, Radiation, and Slip Effects. Mathematical Problems in Engineering, 2016. pp. 1-12. ISSN 1024-123X, DOI https://doi.org/10.1155/2016/4017076.

Noor, N. F. M. and Ul Haq, Rizwan and Wong, H. F. and Alzahrani, A. Khamis and Ullah, M. Zaka (2022) Flow and heat transfer due to partially heated moving lid in a trapezoidal cavity with different constraints at inner circular obstacle. International Communications in Heat and Mass Transfer, 135. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2022.106111.

Nor, Samihah Salwa Md and Patah, Muhamad Fazly Abdul and Salleh, Mokhtar Mat (2023) Surface modification of bio-based composites via silane treatment: a short review. Journal of Adhesion Science and Technology, 37 (5). pp. 801-816. ISSN 0169-4243, DOI https://doi.org/10.1080/01694243.2022.2049087.

Noroozi, Siamak and Ong, Zhi Chao and Khoo, Shin Yee and Aslani, Navid and Sewell, Philip (2019) Dynamic characterisation of Össur Flex-Run prosthetic feet for a more informed prescription. Prosthetics and Orthotics International, 43 (1). pp. 62-70. ISSN 0309-3646, DOI https://doi.org/10.1177/0309364618789449.

Noroozi, Siamak and Rahman, Abdul Ghaffar Abdul and Eng, Hoe Cheng and Dupac, Mihai and Ong, Zhi Chao and Khoo, Shin Yee and Kong, Keen Kuan (2019) A novel investigation into the application of non-destructive evaluation for vibration assessment and analysis of in-service pipes. Nondestructive Testing and Evaluation, 34 (4). pp. 413-428. ISSN 1058-9759, DOI https://doi.org/10.1080/10589759.2019.1605602.

Nuge, Tamrin and Tshai, Kim Yeow and Lim, Siew Shee and Nordin, Norshariza and Hoque, Md Enamul (2020) Characterization and optimization of the mechanical properties of electrospun gelatin nanofibrous scaffolds. World Journal of Engineering, 17 (1). pp. 12-20. ISSN 1708-5284, DOI https://doi.org/10.1108/WJE-04-2019-0119.

Nukman, Y. and Abu Osman, Noor Azuan and Khairi, S.O. and Harizam, M.Z. (2010) A study on laser cutting of textiles. International Congress on Applications of Lasers & Electro Optics.

Nur-E-Alam, Mohammad and Mostofa, Kazi Zehad and Yap, Boon Kar and Basher, Mohammad Khairul and Islam, Mohammad Aminul and Vasiliev, Mikhail and Soudagar, Manzoore Elahi M. and Das, Narottam and Kiong, Tiong Sieh (2024) Machine learning-enhanced all-photovoltaic blended systems for energy-efficient sustainable buildings. Sustainable Energy Technologies and Assessments, 62. p. 103636. ISSN 2213-1388, DOI https://doi.org/10.1016/j.seta.2024.103636.

Odesanya, Kazeem Olabisi and Ahmad, Roslina and Andriyana, Andri and Bingol, Sedat and Cetinkaya, Ridvan and Wong, Yew Hoong (2022) Thermal characterization and stress analysis of Ho2O3 thin film on 4H-SiC substrate. Materials Science in Semiconductor Processing, 152. ISSN 1369-8001, DOI https://doi.org/10.1016/j.mssp.2022.107110.

Odesanya, Kazeem Olabisi and Ahmad, Roslina and Andriyana, Andri and Bingol, Sedat and Wong, Yew Hoong (2022) Review-gate oxide thin films based on silicon carbide. ECS Journal of Solid State Science and Technology, 11 (8). ISSN 2162-8769, DOI https://doi.org/10.1149/2162-8777/ac84ff.

Odesanya, Kazeem Olabisi and Ahmad, Roslina and Andriyana, Andri and Wong, Yew Hoong (2022) Effects of oxidation duration on the structural and electrical characteristics of Ho2O3 gate oxide on 4H-SiC substrate. Journal of Electronic Materials, 51 (8, SI). pp. 4357-4367. ISSN 0361-5235, DOI https://doi.org/10.1007/s11664-022-09686-5.

Odesanya, Kazeem Olabisi and Ahmad, Roslina and Jawaid, Mohammad and Bingol, Sedat and Adebayo, Ganiyat Olusola and Wong, Yew Hoong (2021) Natural fibre-reinforced composite for ballistic applications: A review. Journal of Polymers and the Environment, 29 (12). pp. 3795-3812. ISSN 1566-2543, DOI https://doi.org/10.1007/s10924-021-02169-4.

Onal, Busra Selenay and Kirkar, Safak Metin and Akgul, Dogan and Celen, Ali and Acikgoz, Ozgen and Dalkilic, Ahmet Selim and Kazi, Salim Newaz and Wongwises, Somchai (2022) Heat transfer and pressure drop characteristics of two phase flow in helical coils. Thermal Science and Engineering Progress, 27. ISSN 2451-9049, DOI https://doi.org/10.1016/j.tsep.2021.101143.

Ong, Hwai Chyuan and Chen, Wei-Hsin and Singh, Yashvir and Gan, Yong Yang and Chen, Chia-Yang and Show, Pau Loke (2020) A state-of-the-art review on thermochemical conversion of biomass for biofuel production: A TG-FTIR approach. Energy Conversion and Management, 209. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2020.112634.

Ong, Hwai Chyuan and Milano, Jassinnee and Silitonga, Arridina Susan and Masjuki, Haji Hassan and Shamsuddin, Abd Halim and Wang, Chin-Tsan and Indra Mahlia, Teuku Meurah and Siswantoro, Joko and Kusumo, Fitranto and Sutrisno, Joko (2019) Biodiesel production from Calophyllum inophyllum-Ceiba pentandra oil mixture: Optimization and characterization. Journal of Cleaner Production, 219. pp. 183-198. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2019.02.048.