Items where Division is "Faculty of Engineering" and Year is 2015

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 454.

Article

Abd Rashid, Ahmad Faiz and Yusoff, Sumiani (2015) A review of life cycle assessment method for building industry. Renewable and Sustainable Energy Reviews, 45. pp. 244-248. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.01.043.

Abd Razak, N.A. and Abu Osman, Noor Azuan and Ali, S. and Gholizadeh, H. and Wan Abas, Wan Abu Bakar (2015) Comparison study of the prosthetics interface pressure profile of air splint socket and ICRC polypropylene socket for upper limb prosthetics. Biocybernetics and Biomedical Engineering, 35 (2). pp. 100-105. ISSN 0208-5216, DOI https://doi.org/10.1016/j.bbe.2014.08.003.

Abd Sukor, J. and Mohktar, M.S. and Redmond, S.J. and Lovell, N.H. (2015) Signal quality measures on pulse oximetry and blood pressure signals acquired from self-measurement in a home environment. IEEE Journal of Biomedical and Health Informatics, 19 (1). pp. 102-108. ISSN 2168-2194, DOI https://doi.org/10.1109/JBHI.2014.2361654.

Abdollahi, Y. and Sairi, N.A. and Aroua, M.K. and Masoumi, H.R.F. and Jahangirian, H. and Alias, Y. (2015) Fabrication modeling of industrial CO2 ionic liquids absorber by artificial neural networks. Journal of Industrial and Engineering Chemistry, 25. pp. 168-175. ISSN 1226-086X, DOI https://doi.org/10.1016/j.jiec.2014.10.029.

Abdollahi, Y. and Zakaria, A. and Said, S.M. and Sabri, M.F.M. and Sairi, N.A. and Rezayi, M. and Abouzari-lotf, E. and Dorraj, M. and Islam, A. (2015) Modeling of photodegradation process to remove the higher concentration of environmental pollution. Desalination and Water Treatment, 57 (1). pp. 191-201. ISSN 1944-3994, DOI https://doi.org/10.1080/19443994.2015.1043497.

Abdolvand, H. and Sohrabi, H. and Faraji, G. and Yusof, F. (2015) A novel combined severe plastic deformation method for producing thin-walled ultrafine grained cylindrical tubes. Materials Letters, 143. pp. 167-171. ISSN 0167-577X, DOI https://doi.org/10.1016/j.matlet.2014.12.107.

Abdul Sani, S.F. and Grime, G.W. and Palitsin, V. and Mahdiraji, G.A. and Abdul Rashid, H.A. and Maah, M.J. and Bradley, D.A. (2015) Micro-PIXE analysis of doped SiO2 fibres intended as TL dosimeters for radiation measurements. X-Ray Spectrometry, 44 (2). pp. 33-40. ISSN 0049-8246, DOI https://doi.org/10.1002/xrs.2575.

Abdullah, Norbani and Elsheikh, Mohamed Hamid and Ibrahim, Nik Muhd Jazli Nik and Said, Suhana Mohd and Sabri, Mohd Faizul Mohd and Masjuki, Haji Hassan and Marlina, Anita (2015) Magnetic, thermal, mesomorphic and thermoelectric properties of mononuclear, dimeric and polymeric iron(II) complexes with conjugated ligands. RSC Advances, 5 (63). pp. 50999-51007. ISSN 2046-2069, DOI https://doi.org/10.1039/c5ra07100c.

Abidin, N.H.Z. and Abu Bakar, M.H. and Tamchek, N. and Adikan, Faisal Rafiq Mahamd and Mahdi, M.A. (2015) Reflectivity variation in asymmetric random distributed feedback Raman fiber laser. Laser Physics, 26 (1). 015105. ISSN 1054-660X, DOI https://doi.org/10.1088/1054-660X/26/1/015105.

Abidin, N.I.Z. and Da Forno, A. and Bestetti, M. and Martin, D. and Beer, A. and Atrens, A. (2015) Evaluation of coatings for Mg alloys for biomedical applications. Advanced Engineering Materials, 17 (1). pp. 58-67. ISSN 1438-1656, DOI https://doi.org/10.1002/adem.201300516.

Abnisa, F. and Daud, Wan Mohd Ashri Wan (2015) Optimization of fuel recovery through the stepwise co-pyrolysis of palm shell and scrap tire. Energy Conversion and Management, 99. pp. 334-345. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.04.030.

Abo-Hamad, A. and Hayyan, M. and AlSaadi, M.A. and Hashim, M.A. (2015) Potential applications of deep eutectic solvents in nanotechnology. Chemical Engineering Journal, 273. pp. 551-567. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2015.03.091.

Abramian, M. and Lovell, N.H. and Morley, J.W. and Suaning, G.J. and Dokos, S. (2015) Activation and inhibition of retinal ganglion cells in response to epiretinal electrical stimulation: A computational modelling study. Journal of Neural Engineering, 12 (1). 016002. ISSN 1741-2560, DOI https://doi.org/10.1088/1741-2560/12/1/016002.

Abu Bakar, Nurfatimah and Ching, Yern Chee and Abdullah, Luqman Chuah and Ratnam, Chantara Thevy and Ibrahim, Nor Azowa (2015) Thermal and dynamic mechanical properties of grafted kenaf filled poly (vinyl chloride)/ethylene vinyl acetate composites. Materials & Design, 65. pp. 204-211. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2014.09.027.

Acharya, U.R. and Faust, O. and Molinari, F. and Sree, S.V. and Junnarkar, S.P. and Sudarshan, V. (2015) Ultrasound-based tissue characterization and classification of fatty liver disease: A screening and diagnostic paradigm. Knowledge-Based Systems, 75. pp. 66-77. ISSN 0950-7051, DOI https://doi.org/10.1016/j.knosys.2014.11.021.

Acharya, U.R. and Molinari, F. and Sree, S.V. and Swapna, G. and Saba, L. and Guerriero, S. and Suri, J.S. (2015) Ovarian tissue characterization in ultrasound: A Review. Technology in Cancer Research & Treatment, 14 (3). pp. 251-261. ISSN 1533-0338, DOI https://doi.org/10.1177/1533034614547445.

Acharya, U.R. and Ng, E.Y.K. and Eugene, L.W.J. and Noronha, K.P. and Min, L.C. and Nayak, K.P. and Bhandary, S.V. (2015) Decision support system for the glaucoma using Gabor transformation. Biomedical Signal Processing and Control, 15. pp. 18-26. ISSN 1746-8094,

Acharya, U.R. and Sree, S.V. and Molinari, F. and Saba, L. and Nicolaides, A. and Suri, J.S. (2015) An automated technique for carotid far wall classification using grayscale features and wall thickness variability. Journal of Clinical Ultrasound, 43 (5). pp. 302-311. ISSN 0091-2751, DOI https://doi.org/10.1002/jcu.22183.

Acharya, U.R. and Sudarshan, V.K. and Adeli, H. and Santhosh, J. and Koh, J.E.W. and Adeli, A. (2015) Computer-aided diagnosis of depression using EEG signals. European Neurology, 73 (5-6). pp. 329-336. ISSN 0014-3022 , DOI https://doi.org/10.1159/000381950.

Acharya, U.R. and Sudarshan, V.K. and Ghista, D.N. and Lim, W.J.E. and Molinari, F. and Sankaranarayanan, M. (2015) Computer-aided diagnosis of diabetic subjects by heart rate variability signals using discrete wavelet transform method. Knowledge-Based Systems, 81. pp. 56-64. DOI https://doi.org/10.1016/j.knosys.2015.02.005.

Aeinehvand, Mohammad Mahdi and Ibrahim, Fatimah and Harun, Sulaiman Wadi and Djordjevic, Ivan and Hosseini, Samira and Rothan, Hussin Alwan and Yusof, Rohana and Madou, Marc J. (2015) Biosensing enhancement of dengue virus using microballoon mixers on centrifugal microfluidic platforms. Biosensors and Bioelectronics, 67 (SI). pp. 424-430. ISSN 0956-5663, DOI https://doi.org/10.1016/j.bios.2014.08.076.

Ahmad, M. and Abdul Raman, Abdul Aziz (2015) Elemental distribution and porosity enhancement in advanced nano bimetallic catalyst. Powder Technology, 280. pp. 42-52. ISSN 0032-5910, DOI https://doi.org/10.1016/j.powtec.2015.03.030.

Ahmed, M.H.M. and Ali, N.M. and Salleh, Z.S. and Rahman, Aizat A. and Harun, Sulaiman Wadi and Manaf, M. and Arof, Hamzah (2015) Q-switched erbium doped fiber laser based on single and multiple walled carbon nanotubes embedded in polyethylene oxide film as saturable absorber. Optics & Laser Technology, 65. pp. 25-28. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2014.07.001.

Ahmed, M.M. and Huda, A.S.N. and Isa, N.A.M. (2015) Recursive construction of output-context fuzzy systems for the condition monitoring of electrical hotspots based on infrared thermography. Engineering Applications of Artificial Intelligence, 39. pp. 120-131. ISSN 0952-1976, DOI https://doi.org/10.1016/j.engappai.2014.11.010.

Ahmed, T. and Mekhilef, Saad (2015) Semi-Z-source inverter topology for grid-connected photovoltaic system. IET Power Electronics, 8 (1). pp. 63-75. ISSN 1755-4535, DOI https://doi.org/10.1049/iet-pel.2013.0486.

Ahsan, M.R. and Islam, M.T. and Ullah, M.H. (2015) Computational and experimental analysis of high gain antenna for WLAN/WiMAX applications. Journal of Computational Electronics, 14 (2). pp. 634-641. ISSN 1569-8025, DOI https://doi.org/10.1007/s10825-015-0699-8.

Ahsan, M.R. and Islam, M.T. and Ullah, M.H. (2015) A new low-profile inverted A-shaped patch antenna for multi-band operations. Wireless Personal Communications, 81 (2). pp. 519-529. ISSN 0929-6212, DOI https://doi.org/10.1007/s11277-014-2142-z.

Ahsan, M.R. and Islam, M.T. and Ullah, M.H. (2015) A new meandered-stripline fed dual band patch antenna. Applied Computational Electromagnetics Society Journal, 30 (2). pp. 213-221. ISSN 1054-4887,

Ahsan, M.R. and Islam, M.T. and Ullah, M.H. and Singh, M.J. and Ali, M.T. (2015) Metasurface reflector (MSR) loading for high performance small microstrip antenna design. PLoS ONE, 10 (5). p. 20. ISSN 1932-6203 , DOI http://www.ncbi.nlm.nih.gov/pubmed/26018795.

Ajeel, M.A. and Aroua, M.K. and Daud, W.M.A.W. (2015) Preparation and characterization of carbon black diamond composite electrodes for anodic degradation of phenol. Electrochimica Acta, 153. pp. 379-384. ISSN 0013-4686, DOI https://doi.org/10.1016/j.electacta.2014.11.163.

Ajeel, M.A. and Aroua, M.K. and Daud, Wan Mohd Ashri Wan (2015) P-Benzoquinone anodic degradation by carbon black diamond composite electrodes. Electrochimica Acta, 169. pp. 46-51. ISSN 0013-4686, DOI https://doi.org/10.1016/j.electacta.2015.04.037.

Akter, M.P. and Mekhilef, Saad and Tan, N.M.L. and Akagi, H. (2015) Model predictive control of bidirectional AC-DC converter for energy storage system. Journal of Electrical Engineering & Technology, 10 (1). pp. 165-175. ISSN 1975-0102, DOI https://doi.org/10.5370/Jeet.2015.10.1.165.

Akter, M.P. and Mekhilef, Saad and Tan, N.M.L. and Akagi, H. (2015) Stability and performance investigations of model predictive controlled active-front-end (AFE) rectifiers for energy storage systems. Journal of Power Electronics, 15 (1). pp. 202-215. ISSN 1598-2092, DOI https://doi.org/10.6113/Jpe.2015.15.1.202.

Akter, P. and Uddin, M. and Mekhilef, Saad and Tan, N.M.L. and Akagi, H. (2015) Model predictive control of bidirectional isolated DC–DC converter for energy conversion system. International Journal of Electronics, 102 (8). pp. 1407-1427. ISSN 1362-3060, DOI https://doi.org/10.1080/00207217.2015.1028479.

Al Mahmud, K.A.H. and Kalam, M.A. and Masjuki, Haji Hassan and Mobarak, H.M. and Zulkifli, N.W.M. (2015) An updated overview of diamond-like carbon coating in tribology. Critical Reviews in Solid State and Materials Sciences, 40 (2). pp. 90-118. ISSN 1040-8436, DOI https://doi.org/10.1080/10408436.2014.940441.

Al Mamun, A. and Ahmed, Y.M. and AlKhatib, M.F.R. and Jameel, A.T. and AlSaadit, M. (2015) Lead sorption by carbon nanofibers grown on powdered activated carbon - kinetics and equilibrium. Nano, 10 (2). p. 8. ISSN 1793-2920, DOI https://doi.org/10.1112/s1793292015500171.

Al-Faqheri, W. and Ibrahim, Fatimah and Thio, T.H.G. and Aeinehvand, M.M. and Arof, Hamzah and Madou, M. (2015) Development of novel passive check valves for the microfluidic CD platfor. Sensors and Actuators A: Physical, 222. pp. 245-254. ISSN 0924-4247, DOI https://doi.org/10.1016/j.sna.2014.12.018.

Al-Faqheri, W. and Ibrahim, Fatimah and Thio, T.H.G. and Bahari, N. and Arof, Hamzah and Rothan, Hussin A. and Yusof, Rohana and Madou, M. (2015) Development of a passive liquid valve (PLV) utilizing a pressure equilibrium phenomenon on the centrifugal microfluidic platform. Sensors, 15 (3). pp. 4658-4676. ISSN 1424-8220, DOI https://doi.org/10.3390/s150304658.

Al-Fatlawi, A.W.A. and Rahim, Nasrudin Abd and Saidur, R. and Ward, T.A. (2015) Improving solar energy prediction in complex topography using artificial neural networks: Case study Peninsular Malaysia. Environmental Progress & Sustainable Energy, 34 (5). pp. 1528-1535. ISSN 1944-7442, DOI https://doi.org/10.1002/ep.12130.

Al-Hamadani, Y.A.J. and Chu, K.H. and Son, A. and Heo, J. and Her, N. and Jang, Min and Park, C.M. and Yoon, Y. (2015) Stabilization and dispersion of carbon nanomaterials in aqueous solutions: A review. Separation and Purification Technology, 156 (2). pp. 861-874. ISSN 1383-5866, DOI https://doi.org/10.1016/j.seppur.2015.11.002.

Al-Qazwini, Yusser and Noor, A.S.M. and Yaacob, M.H. and Harun, Sulaiman Wadi and Mahdi, M.A. (2015) Experimental realization and performance evaluation of refractive index SPR sensor based on unmasked short tapered multimode-fiber operating in aqueous environments. Sensors and Actuators A: Physical, 236. pp. 38-43. ISSN 0924-4247, DOI https://doi.org/10.1016/j.sna.2015.10.030.

Al-Saeedi, S. and Sarhan, A.A.D. and Bushroa, A.R. (2015) Investigating the surface tribology of roller-burnished polymer using the fuzzy rule-based approach. Tribology Transactions, 58 (2). pp. 240-246. ISSN 1040-2004, DOI https://doi.org/10.1080/10402004.2014.962205.

Alam, M.A. and Jumaat, Mohd Zamin (2015) Prevention of debonding failure of intermediate anchor to eliminate premature shear failure of flexurally strengthened reinforced concrete beams. Arabian Journal for Science and Engineering, 40 (8). pp. 2219-2232. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-015-1739-1.

Alavi, S.M.A. and Safaei, M.R. and Mahian, O. and Goodarzi, M. and Yarmand, H. and Dahari, M. and Wongwises, S. (2015) A hybrid finite-element/finite-difference scheme for solving the 3-D energy equation in transient nonisothermal fluid flow over a staggered tube bank. Numerical Heat Transfer Part B-Fundamentals, 68 (2). pp. 169-183. ISSN 1040-7790, DOI https://doi.org/10.1080/10407790.2015.1012440.

Alawiah, A. and Alina, M.S. and Bauk, S. and Abdul-Rashid, H.A. and Gieszczyk, W. and Noramaliza, M.N. and Mandiraji, G.A. and Tamchek, N. and Zulkifli, M.I. and Bradley, D.A. and Marashdeh, M.W. (2015) The thermoluminescence characteristics and the glow curves of Thulium doped silica fiber exposed to 10 MV photon and 21 MeV electron radiation. Applied Radiation and Isotopes, 98. pp. 80-86. ISSN 0969-8043, DOI https://doi.org/10.1016/j.apradiso.2015.01.016.

Alawiah, A. and Bauk, S. and Abdul-Rashid, H.A. and Gieszczyk, W. and Hashim, S. and Mandiraji, G.A. and Tamchek, N. and Bradley, D.A. (2015) Potential application of pure silica optical flat fibers for radiation therapy dosimetry. Radiation Physics and Chemistry, 106. pp. 73-76. ISSN 0969-806X, DOI https://doi.org/10.1016/j.radphyschem.2014.06.006.

Alawiah, A. and Bauk, S. and Marashdeh, M.W. and Ng, K.S. and Abdul-Rashid, H.A. and Yusoff, Z. and Gieszczyk, W. and Noramaliza, M.N. and Mahdiraji, G.A. and Tamchek, N. and Muhd-Yassin, S.Z. and Mat-Sharif, K.A. and Zulkifli, M.I. and Maah, M.J. and Omar, S.S.C. and Bradley, D.A. (2015) Thermoluminescence glow curves and deconvoluted glow peaks of Ge doped flat fibers at ultra-high doses of electron radiation. Radiation Physics and Chemistry, 113. pp. 53-58. ISSN 0969-806X, DOI https://doi.org/10.1016/j.radphyschem.2015.04.030.

Albatsh, F.M. and Ahmad, S. and Mekhilef, Saad and Mokhlis, H. and Hassan, M.A. (2015) Optimal placement of unified power flow controllers to improve dynamic voltage stability using power system variable based voltage stability indices. PLoS ONE, 10 (4). p. 32. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0123802.

Ale Ebrahim, N. (2015) Virtual R&D teams: A new model for product development. International Journal of Innovation, 3 (2). pp. 1-27. ISSN 2318-9975, DOI https://doi.org/10.5585/iji.v3i2.43.

Ale Ebrahim, Nader and Ebrahimian, H. and Mousavi, Maryam and Tahriri, Farzad (2015) Does a long reference list guarantee more citations? Analysis of Malaysian highly cited and review papers. International Journal of Management Science and Business Administration, 1 (3). pp. 6-15. ISSN 1849-5419,

Alhalawani, A.M.F. and Rodriguez, O. and Curran, D.J. and Co, R. and Kieran, S. and Arshad, S. and Keenan, T.J. and Wren, A.W. and Crasto, G. and Peel, S.A.F. and Towler, M.R. (2015) A glass polyalkenoate cement carrier for bone morphogenetic proteins. Journal of Materials Science-Materials in Medicine, 26 (3). p. 151. ISSN 0957-4530, DOI https://doi.org/10.1007/s10856-015-5494-3.

Ali, J.M. and Hoang, N.H. and Hussain, Mohd Azlan and Dochain, D. (2015) Review and classification of recent observers applied in chemical process systems. Computers & Chemical Engineering, 76. pp. 27-41. ISSN 0098-1354, DOI https://doi.org/10.1016/j.compchemeng.2015.01.019.

Ali, J.M. and Hussain, Mohd Azlan and Tade, M.O. and Zhang, J. (2015) Artificial intelligence techniques applied as estimator in chemical process systems - A literature survey. Expert Systems with Applications, 42 (14). pp. 5915-5931. ISSN 0957-4174,

Alsubari, B. and Shafigh, P. and Jumaat, Mohd Zamin (2015) Development of self-consolidating high strength concrete incorporating treated palm oil fuel ash. Materials, 8 (5). pp. 2154-2173. ISSN 1996-1944, DOI https://doi.org/10.3390/ma8052154.

Aman, M.M. and Solangi, K.H. and Hossain, M.S. and Badarudin, A. and Jasmon, G.B. and Mokhlis, Hazlie and Bakar, A.H.A. and Kazi, Salim Newaz (2015) A review of safety, health and environmental (SHE) issues of solar energy system. Renewable and Sustainable Energy Reviews, 41. pp. 1190-1204. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2014.08.086.

Amini, H. and Dabbagh, V. and Rezaei, S.M. and Zareinejad, M. and Mardi, N.A. and Sarhan, A.A.D. (2015) Robust control-based linear bilateral teleoperation system without force sensor. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 37 (2). pp. 579-587. ISSN 1678-5878, DOI https://doi.org/10.1007/s40430-014-0207-2.

Amini, H. and Rezaei, S.M. and Sarhan, A.A.D. and Akbari, J. and Mardi, N.A. (2015) Transparency improvement by external force estimation in a time-delayed nonlinear bilateral teleoperation system. Journal of Dynamic Systems Measurement and Control-Transactions of the Asme, 137 (5). p. 15. ISSN 0022-0434, DOI https://doi.org/10.1115/1.4029077.

Amir, Z. and Jan, B.M. and Khalil, M. and Wahab, A.K.A. and Hassan, Z. (2015) Rheological behavior and temperature dependency study of Sara line-based super lightweight completion fluid. Journal of Petroleum Science and Engineering, 130. pp. 106-113. ISSN 0920-4105, DOI https://doi.org/10.1016/j.petrol.2015.03.022.

Amiri, A. and Sadri, R. and Ahmadi, G. and Chew, B.T. and Kazi, S.N. and Shanbedi, M. and Alehashem, M.S. (2015) Synthesis of polyethylene glycol-functionalized multi-walled carbon nanotubes with a microwave-assisted approach for improved heat dissipation. RSC Advances, 5 (45). pp. 35425-35434. ISSN 2046-2069, DOI https://doi.org/10.1039/c5ra02736e.

Amiri, A. and Sadri, R. and Shanbedi, M. and Ahmadi, G. and Chew, B.T. and Kazi, Salim Newaz and Dahari, Mahidzal (2015) Performance dependence of thermosyphon on the functionalization approaches: An experimental study on thermo-physical properties of graphene nanoplatelet-based water nanofluids. Energy Conversion and Management, 92. pp. 322-330. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.12.051.

Annuar, Nurul Zieyana Mohamed and Sabri, Mohd Faizul Mohd and Shuhaimi, Ahmad (2015) Modeling and simulation of metal organic halide vapor phase epitaxy (MOHVPE) growth chamber. Microsystem Technologies, 21 (1). pp. 309-318. ISSN 0946-7076, DOI https://doi.org/10.1007/s00542-013-2046-y.

Aprianti, E. and Shafigh, P. and Bahri, S. and Farahani, J.N. (2015) Supplementary cementitious materials origin from agricultural wastes - A review. Construction and Building Materials, 74. pp. 176-187. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2014.10.010.

Arafat, M.M. and Haseeb, A.S. Md. Abdul and Akbar, S.A. (2015) Growth and characterization of the oxide scales and core/shell nanowires on Ti-6Al-4 V particles during thermal oxidation. Ceramics International, 41 (3). pp. 4401-4409. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2014.11.130.

Arbab, M.I. and Varman, M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Imtenan, S. and Sajjad, H. and Fattah, I.M.R. (2015) Evaluation of combustion, performance, and emissions of optimum palm-coconut blend in turbocharged and non-turbocharged conditions of a diesel engine. Energy Conversion and Management, 90. pp. 111-120. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.11.017.

Ardi, M.S. and Aroua, M.K. and Hashim, Nur Awanis (2015) Progress, prospect and challenges in glycerol purification process: A review. Renewable and Sustainable Energy Reviews, 42. pp. 1164-1173. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2014.10.091.

Arifin, N. and Abu Osman, Noor Azuan and Ali, S. and Gholizadeh, H. and Wan Abas, Wan Abu Bakar (2015) Evaluation of postural steadiness in below-knee amputees when wearing different prosthetic feet during various sensory conditions using the biodex (R) stability system. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 229 (7). pp. 491-498. ISSN 0954-4119, DOI https://doi.org/10.1177/0954411915587595.

Asadi-Eydivand, Mitra and Ebadzadeh, Mohammad Mehdi and Solati-Hashjin, Mehran and Darlot, Christian and Abu Osman, Noor Azuan (2015) Cerebellum-inspired neural network solution of the inverse kinematics problem. Biological Cybernetics, 109 (6). pp. 561-574. ISSN 0340-1200, DOI https://doi.org/10.1007/s00422-015-0661-7.

Asadieraghi, M. and Daud, Wan Mohd Ashri Wan (2015) In-situ catalytic upgrading of biomass pyrolysis vapor: Co-feeding with methanol in a multi-zone fixed bed reactor. Energy Conversion and Management, 92. pp. 448-458. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.12.082.

Asghar, A. and Abdul Raman, Abdul Aziz and Daud, Wan Mohd Ashri Wan (2015) Advanced oxidation processes for in-situ production of hydrogen peroxide/hydroxyl radical for textile wastewater treatment: A review. Journal of Cleaner Production, 87. pp. 826-838. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2014.09.010.

Asghar, A. and Abdul Raman, Abdul Aziz and Daud, Wan Mohd Ashri Wan (2015) Challenges and recommendations for using membranes in wastewater-based microbial fuel cells for in situ Fenton oxidation for textile wastewater treatment. Reviews in Chemical Engineering, 31 (1). pp. 45-67. ISSN 0167-8299, DOI https://doi.org/10.1515/revce-2014-0030.

Ashik, U.P.M. and Daud, W.M.A.W. (2015) Nanonickel catalyst reinforced with silicate for methane decomposition to produce hydrogen and nanocarbon: Synthesis by co-precipitation cum modified Stober method. RSC Advances, 5 (58). pp. 46735-46748. ISSN 2046-2069, DOI https://doi.org/10.1039/c5ra07098h.

Ashik, U.P.M. and Daud, Wan Mohd Ashri Wan and Abbas, H.F. (2015) Production of greenhouse gas free hydrogen by thermocatalytic decomposition of methane – A review. Renewable and Sustainable Energy Reviews, 44. pp. 221-256. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2014.12.025.

Aslam, M. and Shafigh, P. and Jumaat, Mohd Zamin and Shah, S.N.R. (2015) Strengthening of RC beams using prestressed fiber reinforced polymers - A review. Construction and Building Materials, 82. pp. 235-256. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.02.051.

Atabani, A.E. and Badruddin, I.A. and Masjuki, Haji Hassan and Chong, W.T. and Lee, K.T. (2015) Pangium edule reinw: A promising non-edible oil feedstock for biodiesel production. Arabian Journal for Science and Engineering, 40 (2). pp. 583-594. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-014-1452-5.

Ataollahi, F. and Pramanik, S. and Moradi, A. and Dalilottojari, A. and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan (2015) Endothelial cell responses in terms of adhesion, proliferation, and morphology to stiffness of polydimethylsiloxane elastomer substrates. Journal of Biomedical Materials Research Part A, 103 (7). pp. 2203-2213. ISSN 1549-3296, DOI https://doi.org/10.1002/jbm.a.35186.

Ayodele, O.B. and Farouk, H.U. and Mohammed, J. and Uemura, Y. and Daud, W.M.A.W. (2015) Effect of precursor acidity on zeolite supported Pd catalyst properties and hydrodeoxygenation activity for the production of biofuel. Journal of Molecular Catalysis a-Chemical, 400. pp. 179-186. ISSN 1381-1169, DOI https://doi.org/10.1016/j.molcata.2015.01.033.

Ayodele, O.B. and Farouk, H.U. and Mohammed, J. and Uemura, Y. and Daud, Wan Mohd Ashri Wan (2015) Hydrodeoxygenation of oleic acid into n- and iso-paraffin biofuel using zeolite supported fiuoro-oxalate modified molybdenum catalyst: Kinetics study. Journal of the Taiwan Institute of Chemical Engineers, 50. pp. 142-152. ISSN 1876-1070, DOI https://doi.org/10.1016/j.jtice.2014.12.014.

Azari, P. and Luan, N.S. and Gan, S.N. and Yahya, R. and Wong, C.S. and Chua, K.H. and Pingguan-Murphy, Belinda (2015) Electrospun biopolyesters as drug screening platforms for corneal keratocytes. International Journal of Polymeric Materials and Polymeric Biomaterials, 64 (15). pp. 785-791. ISSN 0091-4037, DOI https://doi.org/10.1080/00914037.2015.1030648.

Aziz, F. and Arof, Hamzah and Mokhtar, Norrima and Mubin, Marizan and Abu Talip, Mohamad Sofian (2015) Rotation invariant bin detection and solid waste level classification. Measurement, 65. pp. 19-28. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2014.12.027.

Azooz, S.M. and Ahmad, F. and Ahmad, Harith and Harun, Sulaiman Wadi and Hamida, B.A. and Khan, S. and Halder, A. and Paul, M.C. and Pal, M. and Bhadra, S.K. (2015) Mode-locked 2 mu m fiber laser with a multi-walled carbon nanotube as a saturable absorber. Chinese Optics Letters, 13 (3). p. 4. ISSN 1671-7694, DOI https://doi.org/10.3788/col201513.030602.

Azooz, S.M. and Harun, Sulaiman Wadi and Ahmad, Harith and Halder, A. and Paul, M.C. and Das, S. and Bhadra, S.K. (2015) A Q-switched fibre laser operating in the 2 mu m region based on nonlinear polarization rotation technique. Ukrainian Journal of Physical Optics, 16 (1). pp. 32-37. ISSN 1609-1833, DOI https://doi.org/10.3116/16091833/16/1/32/2015.

Azooz, S.M. and Harun, Sulaiman Wadi and Ahmad, Harith and Halder, A. and Paul, Mukul Chandra and Pal, M. and Bhadra, S.K. (2015) Mode-locked thulium ytterbium co-doped fiber laser with graphene oxide paper saturable absorber. Chinese Physics Letters, 32 (1). ISSN 0256-307X, DOI https://doi.org/10.1088/0256-307x/32/1/014204.

Azri, M. and Abd Rahim, N. and Abd Halim, W. (2015) A highly efficient single-phase transformerless h-bridge inverter for reducing leakage ground current in photovoltaic grid-connected system. Electric Power Components and Systems, 43 (8-10). pp. 928-938. ISSN 1532-5008, DOI https://doi.org/10.1080/15325008.2014.981897.

Azuddin, M. and Choudhury, I.A. and Taha, Z. (2015) Development and performance evaluation of a low-cost custom-made vertical injection molding machine. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 37 (1). pp. 79-86. ISSN 1678-5878, DOI https://doi.org/10.1007/s40430-014-0145-z.

Bagh, F.S.G. and Shahbaz, K. and Mjalli, F.S. and Hashim, M.A. and AlNashef, I.M. (2015) Zinc (II) chloride-based deep eutectic solvents for application as electrolytes: Preparation and characterization. Journal of Molecular Liquids, 204. pp. 76-83. ISSN 0167-7322, DOI https://doi.org/10.1016/j.molliq.2015.01.025.

Baharuddin, N.H. and Sulaiman, N.M.N. and Aroua, M.K. (2015) Removal of heavy metal Ions from mixed solutions via polymer-enhanced ultrafiltration using starch as a water-soluble biopolymer. Environmental Progress & Sustainable Energy, 34 (2). pp. 359-367. ISSN 1944-7442, DOI https://doi.org/10.1002/Ep.11995.

Baharuddin, N.H. and Sulaiman, N.M.N. and Aroua, M.K. (2015) Removal of zinc and lead ions by polymer-enhanced ultrafiltration using unmodified starch as novel binding polymer. International Journal of Environmental Science and Technology, 12 (6). pp. 1825-1834. ISSN 1735-1472, DOI https://doi.org/10.1007/s13762-014-0549-4.

Bang, L.T. and Ramesh, Singh and Purbolaksono, Judha and Ching, Yern Chee and Long, B.D. and Chandran, Hari and Ramesh, Subramaniam and Othman, R. (2015) Effects of silicate and carbonate substitution on the properties of hydroxyapatite prepared by aqueous co-precipitation method. Materials & Design, 87. pp. 788-796. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2015.08.069.

Baradaran, S. and Moghaddam, E. and Nasiri-Tabrizi, B. and Basirun, Wan Jefrey and Mehrali, M. and Sookhakian, M. and Hamdi, M. and Alias, Y. (2015) Characterization of nickel-doped biphasic calcium phosphate/graphene nanoplatelet composites for biomedical application. Materials Science and Engineering: C, 49. pp. 656-668. ISSN 0928-4931, DOI https://doi.org/10.1016/j.msec.2015.01.050.

Barzani, M.M. and Sarhan, A.A.D. and Farahany, S. and Ramesh, S. and Maher, I. (2015) Investigating the Machinability of Al-Si-Cu cast alloy containing bismuth and antimony using coated carbide insert. Measurement, 62. pp. 170-178. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2014.10.030.

Barzani, M.M. and Zalnezhad, E. and Sarhan, A.A.D. and Farahany, S. and Ramesh, S. (2015) Fuzzy logic based model for predicting surface roughness of machined Al-Si-Cu-Fe die casting alloy using different additives-turning. Measurement, 61. pp. 150-161. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2014.10.003.

Batumalay, M. and Harun, Sulaiman Wadi and Irawati, Ninik and Ahmad, Harith and Arof, Hamzah (2015) A study of relative humidity fiber-optic sensors. IEEE Sensors Journal, 15 (3). pp. 1945-1950. ISSN 1530-437X, DOI https://doi.org/10.1109/Jsen.2014.2368979.

Besharati, S.R. and Dabbagh, V. and Amini, H. and Sarhan, A.A.D. and Akbari, J. (2015) Nonlinear dynamic analysis of a new antibacklash gear mechanism design for reducing dynamic transmission error. Journal of Mechanical Design, 137 (5). p. 3. ISSN 1050-0472, DOI https://doi.org/10.1115/1.4029582.

Bhuiyan, M.H.U. and Saidur, R. and Mostafizur, R.M. and Mahbubul, I.M. and Amalina, M.A. (2015) Experimental investigation on surface tension of metal oxide-water nanofluids. International Communications in Heat and Mass Transfer, 65. pp. 82-88. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2015.01.002.

Bhuiyan, M.S.H. and Choudhury, I.A. (2015) Investigation of tool wear and surface finish by analyzing vibration signals in turning assab-705 steel. Machining Science and Technology, 19 (2). pp. 236-261. ISSN 1091-0344, DOI https://doi.org/10.1080/10910344.2015.1018531.

Bhuiyan, M.S.H. and Choudhury, I.A. and Dahari, M. (2015) Development of a control system for artificially rehabilitated limbs: A review. Biological Cybernetics, 109 (2). pp. 141-162. ISSN 0340-1200, DOI https://doi.org/10.1007/s00422-014-0635-1.

Bouafass, A. and Rahmani, L. and Mekhilef, Saad (2015) Design and real time implementation of single phase boost power factor correction converter. Isa Transactions, 55. pp. 267-274. ISSN 0019-0578, DOI https://doi.org/10.1016/j.isatra.2014.10.004.

Bradley, D.A. and Mandiraji, G.A. and Ghomeishi, M. and Dermosesian, E. and Adikan, Faisal Rafiq Mahamd and Rashid, H.A.A. and Maah, M.J. (2015) Enhancing the radiation dose detection sensitivity of optical fibres. Applied Radiation and Isotopes, 100. pp. 43-49. ISSN 0969-8043, DOI https://doi.org/10.1016/j.apradiso.2014.12.005.

Buthiyappan, A. and Abdul Raman, Abdul Aziz and Daud, W. (2015) Degradation performance and cost implication of UV-integrated advanced oxidation processes for wastewater treatments. Reviews in Chemical Engineering, 31 (3). pp. 263-302. ISSN 0167-8299, DOI https://doi.org/10.1515/revce-2014-0039.

Ch'ng, S.Y. and Andriyana, A. and Tee, Y.L. and Verron, E. (2015) Effects of carbon black and the presence of static mechanical strain on the swelling of elastomers in solvent. Materials, 8 (3). pp. 884-898. ISSN 1996-1944, DOI https://doi.org/10.3390/Ma8030884.

Chan, B.T. and Lim, Einly and Ong, C.W. and Abu Osman, Noor Azuan (2015) Effect of spatial inlet velocity profiles on the vortex formation pattern in a dilated left ventricle. Computer Methods in Biomechanics and Biomedical Engineering, 18 (1). pp. 90-96. ISSN 1025-5842, DOI https://doi.org/10.1080/10255842.2013.779683.

Chan, C.H. and Lim, J.J. and Yusoff, R. and Ngoh, G.C. (2015) A generalized energy-based kinetic model for microwave-assisted extraction of bioactive compounds from plants. Separation and Purification Technology, 143. pp. 152-160. ISSN 1383-5866, DOI https://doi.org/10.1016/j.seppur.2015.01.041.

Chan, Chung Hung and Yusoff, Rozita and Ngoh, Gek Cheng (2015) Assessment of scale-up parameters of microwave-assisted extraction via the extraction of flavonoids from cocoa leaves. Chemical Engineering & Technology, 38 (3). pp. 489-496. ISSN 0930-7516, DOI https://doi.org/10.1002/ceat.201400459.

Chan, Chung-Hung and Lim, Jian-Jiun and Yusoff, R. and Ngoh, Gek Cheng (2015) A generalized energy-based kinetic model for microwave-assisted extraction of bioactive compounds from plants. Separation and Purification Technology, 143. 152 - 160. ISSN 1383-5866,

Chang, Kah-Hyong and Paramesran, Raveendran (2015) A configurable architecture for fast moments computation. Journal of Signal Processing Systems for Signal Image and Video Technology, 78 (2). pp. 179-186. ISSN 1939-8018, DOI https://doi.org/10.1007/s11265-013-0857-9.

Chen, L. and Lam, Wei-Haur (2015) A review of survivability and remedial actions of tidal current turbines. Renewable and Sustainable Energy Reviews, 43. pp. 891-900. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2014.11.071.

Chew, C.M. and Aroua, M.K. and Hussain, Mohd Azlan and Wan Ismail, W.M.Z. (2015) Practical performance analysis of an industrial-scale ultrafiltration membrane water treatment plant. Journal of the Taiwan Institute of Chemical Engineers, 46. pp. 132-139. ISSN 1876-1070, DOI https://doi.org/10.1016/j.jtice.2014.09.013.

Chew, C.S. and Durairaj, R. and Haseeb, A.S. Md. Abdul and Beake, B. (2015) Mechanical properties of interfacial phases between Sn-3.5 Ag solder and Ni-18 at. W barrier film by nanoindentation. Soldering & Surface Mount Technology, 27 (2). pp. 90-94. ISSN 0954-0911, DOI https://doi.org/10.1108/Ssmt-01-2015-0001.

Chia, P.Y. and Haseeb, A.S. Md. Abdul (2015) Intermixing reactions in electrodeposited Cu/Sn and Cu/Ni/Sn multilayer interconnects during room temperature and high temperature aging. Journal of Materials Science: Materials in Electronics, 26 (1). pp. 294-299. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-014-2398-9.

Choi, J.R. and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar and Yong, K.W. and Poon, C.T. and Noor Azmi, Mat Adenan and Omar, Siti Zawiah and Chua, K.H. and Xu, F. and Wan Kamarul Zaman, Wan Safwani (2015) In situ normoxia enhances survival and proliferation rate of human adipose tissue-derived stromal cells without increasing the risk of tumourigenesis. PLoS ONE, 10 (1). e0115034. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0115034.

Chong, W.T. and Muzammil, W.K. and Fazlizan, A. and Hassan, M.R. and Taheri, H. and Gwani, M. and Kothari, H. and Poh, S.C. (2015) Urban eco-greenergy (TM) hybrid wind-solar photovoltaic energy system and its applications. International Journal of Precision Engineering and Manufacturing, 16 (7). pp. 1263-1268. ISSN 2234-7593, DOI https://doi.org/10.1007/s12541-015-0165-3.

Choudhury, D. and Roy, T. and Krupka, I. and Hartl, M. and Mootanah, R. (2015) Tribological investigation of ultra-high molecular weight polyethylene against advanced ceramic surfaces in total hip joint replacement. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 229 (4). pp. 410-419. ISSN 1350-6501, DOI https://doi.org/10.1177/1350650114541106.

Darain, K.M.U. and Jumaat, Mohd Zamin and Hossain, M.A. and Hosen, M.A. and Obaydullah, M. and Huda, M.N. and Hossain, I. (2015) Automated serviceability prediction of NSM strengthened structure using a fuzzy logic expert system. Expert Systems with Applications, 42 (1). pp. 376-389. ISSN 0957-4174, DOI https://doi.org/10.1016/j.eswa.2014.07.058.

Darain, K.M.U. and Jumaat, Mohd Zamin and Hossain, M.A. and Hosen, M.A. and Obaydullah, M. and Huda, M.N. and Hossain, I. (2015) Automated serviceability prediction of NSM strengthened structure using a fuzzy logic expert system. Expert Systems with Applications, 42 (1). pp. 376-389. ISSN 0957-4174, DOI https://doi.org/10.1016/j.eswa.2014.07.058.

Datta, R.S. and Said, S.M. and Shahrir, S.R. and Abdullah, N. and Sabri, M.F.M. and Balamurugan, S. and Miyazaki, Y. and Hayashi, K. and Hashim, N.A. and Habiba, U. and Afifi, A.M. (2015) Ionic liquid entrapment by an electrospun polymer nanofiber matrix as a high conductivity polymer electrolyte. RSC Advances, 5 (60). pp. 48217-48223. ISSN 2046-2069, DOI https://doi.org/10.1039/c5ra03935e.

Dawal, S. and Tahriri, F. and Jen, Y. and Case, K. and Tho, N. and Zuhdi, A. and Mousavi, M. and Amindoust, A. and Sakundarini, N. (2015) Empirical evidence of AMT practices and sustainable environmental initiatives in malaysian automotive SMEs. International Journal of Precision Engineering and Manufacturing, 16 (6). pp. 1195-1203. ISSN 2234-7593, DOI https://doi.org/10.1007/s12541-015-0154-6.

Debnath, S. and Said, S.M. and Roslan, M.F. and Sabri, M.F.M. and Long, B.D. (2015) A DFT study on an alkali atom doped decahedral silver nanocluster for potential application in opto-electronics and catalysis. RSC Advances, 5 (10). pp. 7665-7672. ISSN 2046-2069, DOI https://doi.org/10.1039/C4RA14876B.

Dian, L.Y. and Johan, M.R. (2015) Electrical conductivity and transport properties of gold decorated amorphous carbon nanotubes/Epoxy Composites. Fullerenes Nanotubes and Carbon Nanostructures, 23 (2). pp. 120-124. ISSN 1536-383X, DOI https://doi.org/10.1080/1536383x.2013.787600.

Dian, L.Y. and Johan, M.R. (2015) Functionalization of amorphous carbon nanotubes for au nanoparticles hybridization. Fullerenes Nanotubes and Carbon Nanostructures, 23 (2). pp. 181-186. ISSN 1536-383X, DOI https://doi.org/10.1080/1536383x.2013.869220.

Elsayed, B.A. and Hassan, Mohamed Mohsen Abdel-Naeim and Mekhilef, Saad (2015) Fuzzy swinging-up with sliding mode control for third order cart-inverted pendulum system. International Journal of Control Automation and Systems, 13 (1). pp. 238-248. ISSN 1598-6446, DOI https://doi.org/10.1007/s12555-014-0033-4.

Emami, S.D. and Soltanian, M.R.K. and Attaran, A. and Abdul-Rashid, H.A. and Penny, R. and Moghavvemi, Mahmoud and Harun, Sulaiman Wadi and Ahmad, Harith and Mohammed, W.S. (2015) Application of fano resonance effects in optical antennas formed by regular clusters of nanospheres. Applied Physics A: Materials Science & Processing, 118 (1). pp. 139-150. ISSN 0947-8396, DOI https://doi.org/10.1007/s00339-014-8832-2.

Esfe, Mohammad Hemmat and Saedodin, Seyfolah and Naderi, Ali and Alirezaie, Ali and Karimipour, Arash and Wongwises, Somchai and Goodarzi, Marjan and Dahari, Mahidzal (2015) Modeling of thermal conductivity of ZnO-EG using experimental data and ANN methods. International Communications in Heat and Mass Transfer, 63. pp. 35-40. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2015.01.001.

Eshraghi, A. and Abu Osman, Noor Azuan and Gholizadeh, H. and Ali, S. and Wan Abas, Wan Abu Bakar (2015) Interface stress in socket/residual limb with transtibial prosthetic suspension systems during locomotion on slopes and stairs. American Journal of Physical Medicine & Rehabilitation, 94 (1). pp. 1-10. ISSN 0894-9115, DOI https://doi.org/10.1097/PHM.0000000000000134.

Fahami, A. and Beall, G.W. and Nasiri-Tabrizi, B. and Pingguan-Murphy, Belinda (2015) Effect of high-energy ball milling on the formation and microstructural features of carbonated chlorapatite nanopowders. Ceramics International, 41 (3). pp. 4750-4758. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2014.12.025.

Fahami, A. and Nasiri-Tabrizi, B. and Beall, G.W. and Pingguan-Murphy, Belinda (2015) Effect of ion concentration on mechanosynthesis of carbonated chlorapatite nanopowders. Materials Letters, 146. pp. 16-19. ISSN 0167-577X, DOI https://doi.org/10.1016/j.matlet.2015.01.149.

Faizal, M. and Saidur, Rahman and Mekhilef, Saad and Hepbasli, A. and Mahbubul, I.M. (2015) Energy, economic, and environmental analysis of a flat-plate solar collector operated with SiO2 nanofluid. Clean Technologies and Environmental Policy, 17 (6). pp. 1457-1473. ISSN 1618-954X, DOI https://doi.org/10.1007/s10098-014-0870-0.

Farzadi, A. and Waran, V. and Solati-Hashjin, M. and Rahman, Z.A.A. and Asadi, M. and Abu Osman, Noor Azuan (2015) Effect of layer printing delay on mechanical properties and dimensional accuracy of 3D printed porous prototypes in bone tissue engineering. Ceramics International, 41 (7). pp. 8320-8330. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2015.03.004.

Fauzi, H. and Metselaar, H.S.C. and Mahlia, T.M.I. and Silakhori, M. and Ong, H.C. (2015) Thermal characteristic reliability of fatty acid binary mixtures as phase change materials (PCMs) for thermal energy storage applications. Applied Thermal Engineering, 80. pp. 127-131. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2015.01.047.

Foong, K.Y. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Mo, K.H. (2015) Enhancement of the mechanical properties of lightweight oil palm shell concrete using rice husk ash and manufactured sand. Journal of Zhejiang University Science A, 16 (1). pp. 59-69. ISSN 1673-565X, DOI https://doi.org/10.1631/jzus.A1400175.

Forooghi, P. and Abdi, I.A. and Dahari, M. and Hooman, K. (2015) Buoyancy induced heat transfer deterioration in vertical concentric and eccentric annuli. International Journal of Heat and Mass Transfer, 81. pp. 222-233. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2014.10.009.

Freddy, T.K.S. and Rahim, N.A. and Hew, W.P. and Che, H.S. (2015) Modulation techniques to reduce leakage current in three-phase transformerless H7 photovoltaic inverter. IEEE Transactions on Industrial Electronics, 62 (1). pp. 322-331. ISSN 0278-0046, DOI https://doi.org/10.1109/TIE.2014.2327585.

Gan, G.K.W. and Yeo, K.S. and Adikan, Faisal Rafiq Mahamd and Shee, Yu Gang (2015) Four-wave-mixing-assisted brillouin fiber laser with double-brillouin-frequency spacing. Optical Fiber Technology, 21. pp. 198-201. ISSN 1068-5200, DOI https://doi.org/10.1016/j.yofte.2014.11.011.

Garoosi, F. and Safaei, M.R. and Dahari, M. and Hooman, K. (2015) Eulerian-Lagrangian analysis of solid particle distribution in an internally heated and cooled air-filled cavity. Applied Mathematics and Computation, 250. pp. 28-46. ISSN 0096-3003, DOI https://doi.org/10.1016/j.amc.2014.10.068.

Ghafarirad, H. and Rezaei, S.M. and Sarhan, A.A.D.M. and Mardi, N.A. (2015) Modified robust external force control with disturbance rejection with application to piezoelectric actuators. Transactions of the Institute of Measurement and Control, 37 (1). pp. 131-143. ISSN 0142-3312, DOI https://doi.org/10.1177/0142331214535409.

Gharehkhani, S. and Sadeghinezhad, E. and Kazi, S.N. and Yarmand, H. and Badarudin, A. and Safaei, M.R. and Zubir, M.N. (2015) Basic effects of pulp refining on fiber properties- a review. Carbohydrate Polymers, 115. pp. 785-803. ISSN 0144-8617, DOI https://doi.org/10.1016/j.carbpol.2014.08.047.

Ghavimi, S.A.A. and Ebrahimzadeh, M.H. and Solati-Hashjin, M. and Abu Osman, Noor Azuan (2015) Polycaprolactone/starch composite: Fabrication, structure, properties, and applications. Journal of Biomedical Materials Research Part A, 103 (7). pp. 2482-2498. ISSN 1549-3296, DOI https://doi.org/10.1002/jbm.a.35371.

Ghazali, F. and Ibrahim, Shaliza and Abdul Raman, Abdul Aziz and Hasan, D.B. (2015) Reduction of total suspended solids and chemical oxygen demand from palm oil mill effluents using the electrocoagulation process. Environmental Engineering and Management Journal, 14 (12). pp. 2897-2903. ISSN 1582-9596,

Ghiyamat, A. and Shafri, H.Z.M. and Mahdiraji, G.A. and Ashurov, R. and Shariff, A.R.M. and Mansor, S. (2015) Airborne hyperspectral discrimination of tree species with different ages using discrete wavelet transform. International Journal of Remote Sensing, 36 (1). pp. 318-342. ISSN 0143-1161, DOI https://doi.org/10.1080/01431161.2014.995272.

Gulzar, M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Varman, M. and Rizwanul Fattah, I.M. (2015) Oil filter modification for biodiesel–fueled engine: A pathway to lubricant sustainability and exhaust emissions reduction. Energy Conversion and Management, 91. pp. 168-175. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.11.055.

Gunasegaran, M.K. and Tan, C.K. and Bakar, Ab Halim Abu and Mokhlis, Hazlie and Illias, Hazlee Azil (2015) Progress on power swing blocking schemes and the impact of renewable energy on power swing characteristics: a review. Renewable and Sustainable Energy Reviews, 52. pp. 280-288. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.07.066.

Habibullah, M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Zulkifli, N.W.M. and Masum, B.M. and Arslan, A. and Gulzar, M. (2015) Friction and wear characteristics of Calophyllum inophyllum biodiesel. Industrial Crops and Products, 76. pp. 188-197. ISSN 0926-6690, DOI https://doi.org/10.1016/j.indcrop.2015.05.042.

Haghshenasfard, M. and Yeoh, G.H. and Dahari, M. and Hooman, K. (2015) On numerical study of calcium sulphate fouling under sub-cooled flow boiling conditions. Applied Thermal Engineering, 81. pp. 18-27. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2015.01.079.

Haris, H. and Anyi, C.L. and Muhammad, A.R. and Ahmad, F. and Nor, R.M. and Zulkepely, N.R. and Ali, N.M. and Harun, Sulaiman Wadi and Arof, Hamzah (2015) Performance of passively Q-switched ring erbium-doped fiber laser using a multiwalled carbon nanotubes polyethylene oxide (PEO) polymer composite-based saturable absorber. Microwave and Optical Technology Letters, 57 (8). pp. 1897-1901. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.29224.

Harith, Zuraidah and Irawati, Ninik and Rafaie, Hartini Ahmad and Batumalay, Malathy and Harun, Sulaiman Wadi and Nor, Roslan Md and Ahmad, Harith (2015) Tapered plastic optical fiber coated with Al-Doped ZnO nanostructures for detecting relative humidity. IEEE Sensors Journal, 15 (2). pp. 845-849. ISSN 1530-437X, DOI https://doi.org/10.1109/JSEN.2014.2353038.

Hashemi, Sajedeh Sadat Ghazizadeh and Mahmud, Hilmi and Ashraf, Muhammad Aqeel (2015) Performance of green roofs with respect to water quality and reduction of energy consumption in tropics: a review. Renewable and Sustainable Energy Reviews, 52. pp. 669-679. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.07.163.

Hashim, S. and Omar, S.S.C. and Ibrahim, S.A. and Hassan, W.M.S.W. and Ung, N.M. and Mandiraji, G.A. and Bradley, D.A. and Alzimami, K. (2015) Thermoluminescence response of flat optical fiber subjected to 9 MeV electron irradiations. Radiation Physics and Chemistry, 106. pp. 46-49. ISSN 0969-806X, DOI https://doi.org/10.1016/j.radphyschem.2014.06.028.

Hassan, S.N. and Sani, Y.M. and Abdul Raman, Abdul Aziz and Sulaiman, N.M.N. and Daud, Wan Mohd Ashri Wan (2015) Biogasoline: An out-of-the-box solution to the food-for-fuel and land-use competitions. Energy Conversion and Management, 89. pp. 349-367. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.09.050.

Hayyan, A. and Hashim, M.A. and Hayyan, M. (2015) Application of a novel catalyst in the esterification of mixed industrial palm oil for biodiesel production. Bioenergy Research, 8 (1). pp. 459-463. ISSN 1939-1234, DOI https://doi.org/10.1007/s12155-014-9502-0.

Hayyan, M. and Aissaoui, T. and Hashim, M.A. and AlSaadi, M.A. and Hayyan, A. (2015) Triethylene glycol based deep eutectic solvents and their physical properties. Journal of the Taiwan Institute of Chemical Engineers, 50. pp. 24-30. ISSN 1876-1070, DOI https://doi.org/10.1016/j.jtice.2015.03.001.

Hayyan, M. and Hashim, M.A. and AlNashef, I.M. (2015) Kinetics of superoxide ion in dimethyl sulfoxide containing ionic liquids. Ionics, 21 (3). pp. 719-728. ISSN 0947-7047, DOI https://doi.org/10.1007/s11581-014-1224-y.

Heng, L.C. and Al-Amin, A.Q. and Saidur, R. and Ward, T.A. (2015) Renewable energy choice: Cost and energy analysis of grid connected photovoltaic system in Malaysia. Environmental Progress & Sustainable Energy, 34 (3). pp. 866-880. ISSN 1944-7442, DOI https://doi.org/10.1002/ep.12040.

Hindia, M.N. and Reza, A.W. and Noordin, K.A. (2015) A novel scheduling algorithm based on game theory and multicriteria decision making in LTE network. International Journal of Distributed Sensor Networks. p. 8. ISSN 1550-1329, DOI https://doi.org/10.1155/2015/604752.

Hindia, M.N. and Reza, A.W. and Noordin, K.A. and Chayon, M.H.R. (2015) A novel LTE scheduling algorithm for green technology in smart grid. PLoS ONE, 10 (4). p. 18. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0121901.

Hisham, H.K. and Abas, A.F. and Mahdiraji, G.A. and Mahdi, M.A. and Adikan, Faisal Rafiq Mahamd (2015) Optimizing the external optical cavity parameters for performance improvement of a fiber grating fabry-perot laser. Optical Review, 22 (2). pp. 278-288. ISSN 1340-6000, DOI https://doi.org/10.1007/s10043-015-0064-y.

Hizaddin, H.F. and Sarwono, M. and Hashim, M.A. and AlNashef, I.M. and Hadj-Kali, M.K. (2015) Coupling the capabilities of different complexing agents into deep eutectic solvents to enhance the separation of aromatics from aliphatics. The Journal of Chemical Thermodynamics, 84. pp. 67-75. ISSN 0021-9614, DOI https://doi.org/10.1016/j.jct.2014.12.024.

Hmood, J.K. and Emami, S.D. and Noordin, K.A. and Ahmad, Harith and Harun, Sulaiman Wadi and Shalaby, H.M.H. (2015) Optical frequency comb generation based on chirping of Mach-Zehnder modulators. Optics Communications, 344. pp. 139-146. ISSN 0030-4018, DOI https://doi.org/10.1016/j.optcom.2015.01.054.

Hoo, C.S. and Kanesan, J. and Ramiah, H. (2015) Cost reduction in bottom-up hierarchical-based VLSI floorplanning designs. International Journal of Circuit Theory and Applications, 43 (3). pp. 286-306. ISSN 0098-9886, DOI https://doi.org/10.1002/cta.1939.

Hooman, K. and Sauret, E. and Dahari, M. (2015) Theoretical modelling of momentum transfer function of bi-disperse porous media. Applied Thermal Engineering, 75. pp. 867-870. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2014.10.067.

Hosen, M.A. and Jumaat, Mohd Zamin and Islam, A.B.M.S. (2015) Inclusion of CFRP - epoxy composite for end anchorage in NSM-epoxy strengthened beams. Advances in Materials Science and Engineering. p. 10. ISSN 1687-8434,

Hossain, A. and Choudhury, I.A. and Nahar, N. and Hossain, I. and Bin Mamat, A. (2015) Experimental and theoretical investigation of powder-binder mixing mechanism for metal injection molding. Materials and Manufacturing Processes, 30 (1). pp. 41-46. ISSN 1042-6914, DOI https://doi.org/10.1080/10426914.2014.930955.

Hossain, M.I. and Faruque, M.R.I. and Islam, M.T. and Ullah, M.H. (2015) A new wide-band double-negative metamaterial for C- and S-band applications. Materials, 8 (1). pp. 57-71. ISSN 1996-1944, DOI https://doi.org/10.3390/ma8010057.

Hossain, M.S. and Saidur, Rahman and Sabri, Mohd Faizul Mohd and Said, Z. and Hassani, S. (2015) Spotlight on available optical properties and models of nanofluids: A review. Renewable and Sustainable Energy Reviews, 43. pp. 750-762. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2014.11.010.

Hossain, S. and Masjuki, Haji Hassan and Varman, Mahendra and Kalam, M.A. and Rahman, S.M.A. (2015) Comparative evaluation of the blends of gas-to-liquid (GTL) fuels and biodiesels with diesel at high idling conditions: an in-depth analysis on engine performance and environment pollutants. RSC Advances, 5 (17). pp. 13068-13077. ISSN 2046-2069, DOI https://doi.org/10.1039/C4ra16239k.

Hosseini, S. and Azari, P. and Farahmand, E. and Gan, S.N. and Rothan, H.A. and Yusof, R. and Koole, L.H. and Djordjevic, I. and Ibrahim, F. (2015) Polymethacrylate coated electrospun PHB fibers: An exquisite outlook for fabrication of paper-based biosensors. Biosensors and Bioelectronics, 69. pp. 257-264. ISSN 0956-5663, DOI https://doi.org/10.1016/j.bios.2015.02.034.

Hosseini, S. and Ibrahim, F. and Rothan, H.A. and Yusof, R. and van der Marel, C. and Djordjevic, I. and Koole, L.H. (2015) Aging effect and antibody immobilization on -COOH exposed surfaces designed for dengue virus detection. Biochemical Engineering Journal, 99. pp. 183-192. ISSN 1369-703X, DOI https://doi.org/10.1016/j.bej.2015.04.001.

Hosseini, S. and Mahmud, N.H.M.E. and Yahya, R.B. and Ibrahim, F. and Djordjevic, I. (2015) Polypyrrole conducting polymer and its application in removal of copper ions from aqueous solution. Materials Letters, 149. pp. 77-80. ISSN 0167-577X, DOI https://doi.org/10.1016/j.matlet.2015.02.113.

Hourmand, M. and Farahany, S. and Sarhan, A.A.D. and Noordin, M.Y. (2015) Investigating the electrical discharge machining (EDM) parameter effects on Al-Mg2Si metal matrix composite (MMC) for high material removal rate (MRR) and less EWR–RSM approach. The International Journal of Advanced Manufacturing Technology, 77 (5-8). pp. 831-838. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-014-6491-2.

Ibrahim, F. and Thio, T.H.G. and Faisal, T. and Neuman, M. (2015) The application of biomedical engineering techniques to the diagnosis and management of tropical diseases: A review. Sensors, 15 (3). pp. 6947-6995. ISSN 1424-8220 ,

Ibrahim, Fatimah and Uddin, S.M. and Sayad, A.A. and Pei, K.X. and Thiha, A. and Mohktar, M.S. and Hashim, U. and Cho, J. and Thong, Kwai Lin (2015) A portable automatic endpoint detection system for amplicons of loop mediated isothermal amplification on microfluidic compact disk platform. Sensors, 15 (3). pp. 5376-5389. ISSN 1424-8220,

Ibrahim, I. and Ibrahim, Z. and Ahmad, Hamzah and Jusof, M.F.M. and Yusof, Z.M. and Nawawi, S.W. and Mubin, M. (2015) An assembly sequence planning approach with a rule-based multi-state gravitational search algorithm. The International Journal of Advanced Manufacturing Technology, 79 (5-8). pp. 1363-1376. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-015-6857-0.

Ijam, A. and Saidur, R. and Ganesan, P. and Golsheikh, A.M. (2015) Stability, therrno-physical properties, and electrical conductivity of graphene oxide-deionized water/ethylene glycol based nanofluid. International Journal of Heat and Mass Transfer, 87. pp. 92-103. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2015.02.060.

Illias, Hazlee Azil and Chai, X.R. and Abu Bakar, A.H. and Mokhlis, Hazlie (2015) Transformer incipient fault prediction using combined artificial neural network and various particle swarm optimisation techniques. PLoS ONE, 10 (6). p. 16. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0129363.

Imran, M. and Lim, S.F.E. and Putra, I.S. and Ariffin, A.K. and Tan, C.J. and Purbolaksono, J. (2015) Assessment of a planar inclusion in a solid cylinder. Engineering Failure Analysis, 48. pp. 236-246. ISSN 1350-6307, DOI https://doi.org/10.1016/j.engfailanal.2014.11.027.

Imtenan, S. and Masjuki, Haji Hassan and Varman, M. and Fattah, I.M.R. (2015) Evaluation of n-butanol as an oxygenated additive to improve combustion-emission-performance characteristics of a diesel engine fuelled with a diesel-calophyllum inophyllum biodiesel blend. RSC Advances, 5 (22). pp. 17160-17170. ISSN 2046-2069, DOI https://doi.org/10.1039/C4ra15474f.

Imtenan, S. and Masjuki, Haji Hassan and Varman, M. and Fattah, I.M.R. and Sajjad, H. and Arbab, M.I. (2015) Effect of n-butanol and diethyl ether as oxygenated additives on combustion-emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel-jatropha biodiesel blend. Energy Conversion and Management, 94. pp. 84-94. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.01.047.

Imtenan, S. and Rahman, S.M.A. and Masjuki, Haji Hassan and Varman, M. and Kalam, Md. Abul (2015) Effect of dynamic injection pressure on performance, emission and combustion characteristics of a compression ignition engine. Renewable and Sustainable Energy Reviews, 52. pp. 1205-1211. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.07.166.

Iqbal, Md. Arbab and Varman, Mahendra and Masjuki, Haji Hassan and Kalam, M.A. and Hossain, Sajjad and Sayeed, Imtenan (2015) Tailoring fuel properties using jatropha, palm and coconut biodiesel to improve CI engine performance and emission characteristics. Journal of Cleaner Production, 101. pp. 262-270. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2015.04.011.

Irawati, Ninik and Suthaskumar, M. and John, V. and Ali, N.M. and Ahmad, Harith and Harun, Sulaiman Wadi (2015) Fabrication of polymer microfiber by direct drawing. Microwave and Optical Technology Letters, 57 (4). pp. 820-823. ISSN 0895-2477, DOI https://doi.org/10.1002/Mop.28967.

Islam, M. and Mekhilef, Saad and Hasan, M. (2015) Single phase transformerless inverter topologies for grid-tied photovoltaic system: A review. Renewable and Sustainable Energy Reviews, 45. pp. 69-86. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.01.009.

Islam, M.D. and Reza, C.M.F.S. and Mekhilef, Saad (2015) Modeling and experimental validation of 5-level hybrid H-bridge multilevel inverter fed DTC-IM drive. Journal of Electrical Engineering & Technology, 10 (2). pp. 574-585. ISSN 1975-0102, DOI https://doi.org/10.5370/Jeet.2015.10.2.574.

Islam, M.J. and Reza, A.W. and Noordin, K.A. and Dimyati, K. and Kausar, A.M.Z. (2015) An accelerated and accurate three-dimensional ray tracing using red-black tree with facet mining and object bouncing techniques. Turkish Journal of Electrical Engineering and Computer Sciences, 23 (2). pp. 580-588. ISSN 1300-0632, DOI https://doi.org/10.3906/elk-1212-98.

Islam, M.T. and Ahsan, M.R. and Ullah, M.H. (2015) A new biopolymer substrate-based compact monopole antenna covering RFID, WiMAX, and C/X-band. Microwave and Optical Technology Letters, 57 (9). pp. 2002-2005. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.29253.

Islam, M.T. and Ganesan, P. and Cheng, J. (2015) A pair of bubbles' rising dynamics in a xanthan gum solution: a CFD study. RSC Advances, 5 (11). pp. 7819-7831. ISSN 2046-2069, DOI https://doi.org/10.1039/c4ra15728a.

Ismail, M.S. and Moghavvemi, Mahmoud and Mahlia, Teuku Meurah Indra and Muttaqi, K.M. and Moghavvemi, S. (2015) Effective utilization of excess energy in standalone hybrid renewable energy systems for improving comfort ability and reducing cost of energy: A review and analysis. Renewable and Sustainable Energy Reviews, 42. pp. 726-734. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2014.10.051.

Ismail, M.S. and Purbolaksono, J. and Andriyana, A. and Tan, C.J. and Muhammad, N. and Liew, H.L. (2015) The use of initial imperfection approach in design process and buckling failure evaluation of axially compressed composite cylindrical shells. Engineering Failure Analysis, 51. pp. 20-28. ISSN 1350-6307, DOI https://doi.org/10.1016/j.engfailanal.2015.02.017.

Ismail, Z. and Othman, S.Z. and Law, K.H. and Sulaiman, A.H. and Hashim, R. (2015) Comparative performance of water hyacinth (Eichhornia crassipes) and water lettuce (Pista stratiotes) in preventing nutrients build-up in municipal wastewater. Clean-Soil Air Water, 43 (4). pp. 521-531. ISSN 1863-0650, DOI https://doi.org/10.1002/clen.201200254.

Iwahashi, M. and Yoshida, T. and Mokhtar, N.B. and Kiya, H. (2015) Bit-depth scalable lossless coding for high dynamic range images. Eurasip Journal on Advances in Signal Processing. pp. 1-15. ISSN 1687-6180, DOI https://doi.org/10.1186/s13634-015-0209-y.

Jafarlou, D.M. and Zalnezhad, E. and Hamouda, A.S. and Faraji, G. and Bin Mardi, N.A. and Mohamed, M.A.H. (2015) Evaluation of the mechanical properties of AA 6063 processed by severe plastic deformation. Metallurgical and Materials Transactions A, 46A (5). pp. 2172-2184. ISSN 1073-5623, DOI https://doi.org/10.1007/s11661-015-2806-7.

Jahangirzadeh, A. and Akib, S. (2015) Experimental study for determination of collar dimensions around bridge pier. Baltic Journal of Road and Bridge Engineering, 10 (1). pp. 89-96. ISSN 1822-427X,

Jamaludin, J. and Abd Rahim, N. and Ping, H.W. (2015) Multilevel voltage source inverter with optimised usage of bidirectional switches. IET Power Electronics, 8 (3). pp. 378-390. ISSN 1755-4543, DOI https://doi.org/10.1049/iet-pel.2014.0097.

Jamian, J.J. and Mustafa, M.W. and Mokhlis, Hazlie (2015) Optimal multiple distributed generation output through rank evolutionary particle swarm optimization. Neurocomputing, 152. pp. 190-198. ISSN 0925-2312, DOI https://doi.org/10.1016/j.neucom.2014.11.001.

Jumaat, Mohd Zamin and Alengaram, Ubagaram Johnson and Ahmmad, R. and Bahri, S. and Islam, A.B.M.S. (2015) Characteristics of palm oil clinker as replacement for oil palm shell in lightweight concrete subjected to elevated temperature. Construction and Building Materials, 101 (pt.1). pp. 942-951. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.10.104.

Kabir, S.M.A. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Sharmin, A. and Islam, A. (2015) Influence of molarity and chemical composition on the development of compressive strength in POFA based geopolymer mortar. Advances in Materials Science and Engineering. p. 15. ISSN 1687-8434, DOI https://doi.org/10.1155/2015/647071.

Kahourzade, S. and Mahmoudi, A. and Mokhlis, Hazlie (2015) A comparative study of multi-objective optimal power flow based on particle swarm, evolutionary programming, and genetic algorithm. Electrical Engineering, 97 (1). pp. 1-12. ISSN 0948-7921, DOI https://doi.org/10.1007/s00202-014-0307-0.

Kalwar, Kafeel Ahmed and Aamir, Muhammad and Mekhilef, Saad (2015) Inductively coupled power transfer (ICPT) for electric vehicle charging - A review. Renewable and Sustainable Energy Reviews, 47. pp. 462-475. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.03.040.

Kamil, N.S.M. and Md Dawal, Siti Zawiah (2015) Effect of postural angle on back muscle activities in aging female workers performing computer tasks. Journal of Physical Therapy Science, 27 (6). pp. 1967-1970. ISSN 0915-5287 , DOI https://doi.org/10.1589/jpts.27.1967.

Kanadasan, J. and Razak, Hashim Abdul (2015) Engineering and sustainability performance of self-compacting palm oil mill incinerated waste concrete. Journal of Cleaner Production, 89. pp. 78-86. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2014.11.002.

Kang, K. and Jang, M. and Cui, M. and Qiu, P. and Na, S. and Son, Y. and Khim, J. (2015) Enhanced sonocatalytic treatment of ibuprofen by mechanical mixing and reusable magnetic core titanium dioxide. Chemical Engineering Journal, 264. pp. 522-530. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2014.10.106.

Kang, Y.L. and Ibrahim, S. and Saravanan, P. (2015) Synergetic effect of conductive polymer poly(3,4-ethylenedioxythiophene) with different structural configuration of anode for microbial fuel cell application. Bioresource Technology, 189. pp. 364-369. ISSN 0960-8524, DOI https://doi.org/10.1016/j.biortech.2015.04.044.

Karim, M.E. and Munir, A. and Reza, A.W. and Muhammad-Sukki, F. and Yasin, S.H.M. and Abu-Bakar, S.H. and Rahim, R.A. (2015) Too enthusiastic to care for safety: Present status and recent developments of nanosafety in ASEAN countries. Technological Forecasting & Social Change, 92. pp. 168-181. ISSN 0040-1625, DOI https://doi.org/10.1016/j.techfore.2014.07.003.

Katiyar, P. and Mahadi, W.N.L.W. (2015) Impact analysis on distance variation between patch antenna and metamaterial. Microwave and Optical Technology Letters, 57 (1). pp. 178-183. ISSN 0895-2477, DOI https://doi.org/10.1002/Mop.28809.

Katiyar, P.R. and Mahadi, W.N.L.B.W. (2015) Gain improvement of microstrip patch antenna using CLS split ring resonator metamaterial. Frequenz, 69 (3-4). pp. 95-103. ISSN 0016-1136, DOI https://doi.org/10.1515/freq-2014-0089.

Kaviani, S. and Hassanli, A.M. and Homayounfar, M. (2015) Optimal crop water allocation based on constraint-state method and nonnormal stochastic variable. Water Resources Management, 29 (4). pp. 1003-1018. ISSN 0920-4741, DOI https://doi.org/10.1007/s11269-014-0856-z.

Kazemzadeh, A. and Ganesan, P. and Ibrahim, F. and Kulinsky, L. and Madou, M.J. (2015) Guided routing on spinning microfluidic platforms. RSC Advances, 5 (12). pp. 8669-8679. ISSN 2046-2069, DOI https://doi.org/10.1039/C4a14397c.

Kazi, S.N. and Badarudin, A. and Zubir, M.N.M. and Ming, H.N. and Misran, M. and Sadeghinezhad, E. and Mehrali, M. and Syuhada, N.I. (2015) Investigation on the use of graphene oxide as novel surfactant to stabilize weakly charged graphene nanoplatelets. Nanoscale Research Letters, 10. p. 15. ISSN 1931-7573, DOI https://doi.org/10.1186/s11671-015-0882-7.

Kazi, S.N. and Duffy, G.G. and Chen, X.D. (2015) Heat transfer coefficient of flowing wood pulp fibre suspensions to monitor fibre and paper quality. Applied Thermal Engineering, 78. pp. 172-184. ISSN 1359-4311,

Kazi, S.N. and Teng, K.H. and Zakaria, M.S. and Sadeghinezhad, E. and Bakar, M.A. (2015) Study of mineral fouling mitigation on heat exchanger surface. Desalination, 367. pp. 248-254. ISSN 0011-9164, DOI https://doi.org/10.1016/j.desal.2015.04.011.

Khan, S.A. and Rahim, N.A. and Bakar, A.H.A. and Tan, C.K. (2015) Single-Phase Bridgeless Zeta PFC Converter with Reduced Conduction Losses. Journal of Power Electronics, 15 (2). pp. 356-365. ISSN 1598-2092, DOI https://doi.org/10.6113/JPE.2015.15.2.356.

Khanlou, H.M. and Ang, B.C. and Talebian, S. and Afifi, A.M. and Andriyana, A. (2015) Electrospinning of polymethyl methacrylate nanofibers: Optimization of processing parameters using the Taguchi design of experiments. Textile Research Journal, 85 (4). pp. 356-368. ISSN 0040-5175, DOI https://doi.org/10.1177/0040517514547208.

Khanlou, H.M. and Ang, B.C. and Talebian, S. and Barzani, M.M. and Silakhori, M. and Fauzi, H. (2015) A systematic study of maghemite/PMMA nano-fibrous composite via an electrospinning process: Synthesis and characterization. Measurement, 70. pp. 179-187. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2015.04.004.

Kibria, M.A. and Anisur, M.R. and Mahfuz, M.H. and Saidur, Rahman and Metselaar, I.H.S.C. (2015) A review on thermophysical properties of nanoparticle dispersed phase change materials. Energy Conversion and Management, 95. pp. 69-89. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.02.028.

Kim, K. and Cho, E. and Thokchom, B. and Cui, M. and Jang, M. and Khim, J. (2015) Synergistic sonoelectrochemical removal of substituted phenols: Implications of ultrasonic parameters and physicochemical properties. Ultrasonics Sonochemistry, 24. pp. 172-177. ISSN 1350-4177, DOI https://doi.org/10.1016/j.ultsonch.2014.11.004.

Kumar, N. and Anand, L. (2015) Broadband high performance laterally diffused metal-oxide-semiconductor power amplifier for mobile two-way radio applications. IET Circuits, Devices and Systems, 9 (4). pp. 283-289. ISSN 1751-858X, DOI https://doi.org/10.1049/iet-cds.2014.0206.

Kundu, A. and Sen Gupta, B. and Hashim, M.A. and Sahu, J.N. and Mujaware, M. and Redzwan, G. (2015) Optimisation of the process variables in production of activated carbon by microwave heating. RSC Advances, 5 (45). pp. 35899-35908. ISSN 2046-2069, DOI https://doi.org/10.1039/c4ra16900j.

Kundu, A. and SenGupta, B. and Hashim, M.A. and Redzwan, G. (2015) Taguchi optimisation approach for chromium removal in a rotating packed bed contractor. Journal of the Taiwan Institute of Chemical Engineers, 57. pp. 91-97. ISSN 1876-1070, DOI https://doi.org/10.1016/j.jtice.2015.05.022.

Laghari, J.A. and Mokhlis, Hazlie and Karimi, M. and Bakar, A.H.A. and Mohamad, H. (2015) An islanding detection strategy for distribution network connected with hybrid DG resources. Renewable and Sustainable Energy Reviews, 45. pp. 662-676. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.02.037.

Lam, W.H. and Chen, L. and Hashim, Roslan (2015) Analytical wake model of tidal current turbine. Energy, 79. pp. 512-521. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2014.11.047.

Latef, T.A. and Khamas, S. and Reza, A.W. (2015) Gain enhancement for circularly polarized double layered printed hemispherical helical antenna arrays. Journal of Electromagnetic Waves and Applications, 29 (10). pp. 1342-1353. ISSN 0920-5071, DOI https://doi.org/10.1080/09205071.2015.1044126.

Latibari, S.T. and Mehrali, M. and Mahlia, T.M.I. and Afifi, A.B.M. and Akhiani, A.R. and Metselaar, H.S.C. (2015) Facile synthesis and thermal performances of stearic acid/titania core/shell nanocapsules by sol-gel method. Energy, 85. pp. 635-644. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2015.04.008.

Lee, C.S. and Aroua, Mohamed Kheireddine and Daud, Wan Mohd Ashri Wan and Cognet, P. and Peres-Lucchese, Y. and Fabre, P.L. and Reynes, O. and Latapie, L. (2015) A review: Conversion of bioglycerol into 1,3-propanediol via biological and chemical method. Renewable and Sustainable Energy Reviews, 42. pp. 963-972. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2014.10.033.

Lee, H.V. and Juan, J.C. and Taufiq-Yap, Y.H. and Kong, P.S. and Rahman, N.A. (2015) Advancement in heterogeneous base catalyzed technology: An efficient production of biodiesel fuels. Journal of Renewable and Sustainable Energy, 7 (3). p. 46. ISSN 1941-7012, DOI https://doi.org/10.1063/1.4919082.

Lee, S.L. and Saidur, R. and Sabri, M.F.M. and Min, T.K. (2015) Molecular dynamic simulation on the thermal conductivity of nanofluids in aggregated and non-aggregated states. Numerical Heat Transfer, Part A: Applications, 68 (4). pp. 432-453. ISSN 1040-7782, DOI https://doi.org/10.1080/10407782.2014.986366.

Lee, W.S. and Chua, A.S.M. and Yeoh, H.K. and Nittami, T. and Ngoh, G.C. (2015) Strategy for the biotransformation of fermented palm oil mill effluent into biodegradable polyhydroxyalkanoates by activated sludge. Chemical Engineering Journal, 269. pp. 288-297. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2015.01.103.

Liau, K.F. and Shoji, T. and Ong, Y.H. and Chua, A.S.M. and Yeoh, H.K. and Ho, P.Y. (2015) Kinetic and stoichiometric characterization for efficient enhanced biological phosphorus removal (EBPR) process at high temperatures. Bioprocess and Biosystems Engineering, 38 (4). pp. 729-737. ISSN 1615-7591, DOI https://doi.org/10.1007/s00449-014-1313-3.

Liew, W.S. and Seera, M. and Loo, C.K. and Lim, E. (2015) Affect classification using genetic-optimized ensembles of fuzzy ARTMAPs. Applied Soft Computing, 27. pp. 53-63. ISSN 1568-4946, DOI https://doi.org/10.1016/j.asoc.2014.10.032.

Liew, Yih Miin and McLaughlin, R.A. and Chan, B.T. and Aziz, Y.F.A. and Chee, K.H. and Ung, N.M. and Tan, L.K. and Lai, K.W. and Ng, S. and Lim, E. (2015) Motion corrected LV quantification based on 3D modelling for improved functional assessment in cardiac MRI. Physics in Medicine & Biology, 60 (7). pp. 2715-2733. ISSN 0031-9155, DOI https://doi.org/10.1088/0031-9155/60/7/2715.

Lim, M.W. and Lau, E.V. and Poh, P.E. and Chong, W.T. (2015) Interaction studies between high-density oil and sand particles in oil flotation technology. Journal of Petroleum Science and Engineering, 131. pp. 114-121. ISSN 0920-4105, DOI https://doi.org/10.1016/j.petrol.2015.04.016.

Liza, S. and Ohtake, N. and Akasaka, H. and Munoz-Guijosa, J.M. (2015) Tribological and thermal stability study of nanoporous amorphous boron carbide films prepared by pulsed plasma chemical vapor deposition. Science and Technology of Advanced Materials, 16 (3). p. 13. ISSN 1468-6996, DOI https://doi.org/10.1088/1468-6996/16/3/035007.

Loh, K.K. and Yeo, K.S. and Shee, Y.G. and Adikan, Faisal Rafiq Mahamd and Mahdi, M.A. (2015) Microwave photonic filter using multiwavelength brillouin-erbium fiber laser. IEEE Photonics Technology Letters, 27 (1). pp. 65-68. ISSN 1041-1135, DOI https://doi.org/10.1109/Lpt.2014.2361863.

Lokman, A. and Arof, Hamzah and Harun, Sulaiman Wadi (2015) Dumbbell shaped inline Mach-Zehnder interferometer for glucose detection. Measurement, 59. pp. 167-170. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2014.09.061.

Lokman, A. and Arof, Hamzah and Harun, Sulaiman Wadi (2015) Tapered fiber coated with hydroxyethyl cellulose/polyvinylidene fluoride composite for relative humidity sensor. Sensors and Actuators A: Physical, 225. pp. 128-132. ISSN 0924-4247, DOI https://doi.org/10.1016/j.sna.2015.02.015.

Loo, C.K. and Liew, W.S. and Seera, M. and Lim, Einly (2015) Probabilistic ensemble fuzzy ARTMAP optimization using hierarchical parallel genetic algorithms. Neural Computing and Applications, 26 (2). pp. 263-276. ISSN 0941-0643, DOI https://doi.org/10.1007/s00521-014-1632-y.

Loo, M.S. and Le Cam, J.B. and Andriyana, A. and Robin, E. and Afifi, A.M. (2015) Fatigue of swollen elastomers. International Journal of Fatigue, 74. pp. 132-141. ISSN 0142-1123, DOI https://doi.org/10.1016/j.ijfatigue.2014.11.015.

Loo, P.L. and Chong, V.C. and Ibrahim, S. and Sabaratnam, V. (2015) Manipulating culture conditions and feed quality to increase the survival of larval marble goby oxyeleotris marmorata. North American Journal of Aquaculture, 77 (2). pp. 149-159. ISSN 1522-2055, DOI https://doi.org/10.1080/15222055.2014.987932.

Low, W.S. and Wan Abas, Wan Abu Bakar (2015) Benchtop technologies for circulating tumor cells separation based on biophysical properties. BioMed Research International. p. 22. ISSN 2314-6133,

Lwin, N. and Ahmad Fauzi, M.N. and Sreekantan, S. and Othman, R. (2015) Physical and electromagnetic properties of nanosized Gd substituted Mg–Mn ferrites by solution combustion method. Physica B: Condensed Matter, 461. pp. 134-139. ISSN 0921-4526, DOI https://doi.org/10.1016/j.physb.2015.01.001.

Lwin, N. and Othman, R. and Sreekantan, S. and Fauzi, M.N.A. (2015) Study on the structural and electromagnetic properties of Tm-substituted Mg-Mn ferrites by a solution combustion method. Journal of Magnetism and Magnetic Materials, 385. pp. 433-440. ISSN 0304-8853, DOI https://doi.org/10.1016/j.jmmm.2015.03.046.

Mahbubul, I.M. and Saadah, A. and Saidur, R. and Khairul, M.A. and Kamyar, A. (2015) Thermal performance analysis of Al2O3/R-134a nanorefrigerant. International Journal of Heat and Mass Transfer, 85. pp. 1034-1040. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2015.02.038.

Mahbubul, I.M. and Saidur, Rahman and Amalina, M.A. and Elcioglu, E.B. and Okutucu-Ozyurt, T. (2015) Effective ultrasonication process for better colloidal dispersion of nanofluid. Ultrasonics Sonochemistry, 26. pp. 361-369. ISSN 1350-4177, DOI https://doi.org/10.1016/j.ultsonch.2015.01.005.

Mahdavi, S.H. and Razak, H.A. (2015) A comparative study on optimal structural dynamics using wavelet functions. Mathematical Problems in Engineering. p. 10. ISSN 1024-123X, DOI https://doi.org/10.1155/2015/956793.

Mahdavi, S.H. and Razak, H.A. (2015) An efficient iterative scheme using family of chebyshev's operations. Mathematical Problems in Engineering. p. 10. ISSN 1024-123X, DOI https://doi.org/10.1155/2015/205295.

Mahdiraji, G.A. and Adikan, Faisal Rafiq Mahamd and Bradley, D.A. (2015) Collapsed optical fiber: A novel method for improving thermoluminescence response of optical fiber. Journal of Luminescence, 161. pp. 442-447. ISSN 0022-2313, DOI https://doi.org/10.1016/j.jlumin.2015.01.021.

Maher, I. and Eltaib, M.E.H. and Sarhan, A.A.D. and El-Zahry, R.M. (2015) Cutting force-based adaptive neuro-fuzzy approach for accurate surface roughness prediction in end milling operation for intelligent machining. The International Journal of Advanced Manufacturing Technology, 76 (5-8). pp. 1459-1467. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-014-6379-1.

Maher, I. and Sarhan, A.A.D. and Hamdi, M. (2015) Review of improvements in wire electrode properties for longer working time and utilization in wire EDM machining. The International Journal of Advanced Manufacturing Technology, 76 (1-4). pp. 329-351. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-014-6243-3.

Mahmoodian, R. and Hamdi, M. and Hassan, M.A. and Akbari, A. (2015) Mechanical and chemical characterization of a TiC/C system synthesized using a focus plasma arc. PLoS ONE, 10 (6). p. 10. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0130836.

Mamun, N. and Jassim, W.A. and Zilany, M.S.A. (2015) Prediction of speech intelligibility using a neurogram orthogonal polynomial measure (NOPM). IEEE/ACM Transactions on Audio, Speech and Language Processing, 23 (4). pp. 760-773. ISSN 2329-9290, DOI https://doi.org/10.1109/taslp.2015.2401513.

Mandiraji, G.A. and Ghomeishi, M. and Dermosesian, E. and Hashim, S. and Ung, N.M. and Adikan, Faisal Rafiq Mahamd and Bradley, D.A. (2015) Optical fiber based dosimeter sensor: Beyond TLD-100 limits. Sensors and Actuators A: Physical, 222. pp. 48-57. ISSN 0924-4247, DOI https://doi.org/10.1016/j.sna.2014.11.017.

Mansouri, M. and Salamonsen, R.F. and Lim, E. and Akmeliawati, R. and Lovell, N.H. (2015) Preload-based starling-like control for rotary blood pumps: Numerical comparison with pulsatility control and constant speed operation. PLoS ONE, 10 (4). p. 16. ISSN 1932-6203 , DOI https://doi.org/10.1371/journal.pone.0121413.

Masmiati, N. and Sarhan, A.A.D. (2015) Optimizing cutting parameters in inclined end milling for minimum surface residual stress - Taguchi approach. Measurement, 60. pp. 267-275. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2014.10.002.

Masum, S.M. and Masjuki, Haji Hassan and Kalam, M.A. and Palash, S.M. and Habibullah, M. (2015) Effect of alcohol-gasoline blends optimization on fuel properties, performance and emissions of a SI engine. Journal of Cleaner Production, 86. pp. 230-237. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2014.08.032.

Mazari, S.A. and Si Ali, B. and Jan, B.M. and Saeed, I.M. and Nizamuddin, S. (2015) An overview of solvent management and emissions of amine-based CO2 capture technology. International Journal of Greenhouse Gas Control, 34. pp. 129-140. ISSN 1750-5836, DOI https://doi.org/10.1016/j.ijggc.2014.12.017.

Md Dawal, Siti Zawiah and Ismail, Z. and Yusuf, K. and Abdul-Rashid, S.H. and Shalahim, N.S.M. and Abdullah, N.S. and Kamil, N.S.M. (2015) Determination of the significant anthropometry dimensions for user-friendly designs of domestic furniture and appliances - Experience from a study in Malaysia. Measurement, 59. pp. 205-215. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2014.09.030.

Mehrali, M. and Sadeghinezhad, E. and Rashidi, M.M. and Akhiani, A.R. and Latibari, S.T. and Mehrali, M. and Metselaar, H.S.C. (2015) Experimental and numerical investigation of the effective electrical conductivity of nitrogen-doped graphene nanofluids. Journal of Nanoparticle Research, 17 (6). p. 17. ISSN 1388-0764, DOI https://doi.org/10.1007/s11051-015-3062-x.

Mehran, Q.M. and Bushroa, Abdul Razak and Fazal, M.A. (2015) Evaluation of CrAlN multilayered coatings deposited by PVD magnetron sputtering. Journal of Adhesion Science and Technology, 29 (19). pp. 2076-2089. ISSN 0169-4243, DOI https://doi.org/10.1080/01694243.2015.1054577.

Mirhassani, S. and Ong, Hwai Chyuan and Chong, W.T. and Leong, K.Y. (2015) Advances and challenges in grid tied photovoltaic systems. Renewable and Sustainable Energy Reviews, 49. pp. 121-131. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.04.064.

Mirhassani, S.M. and Golroodbari, S.Z.M and Goiroodbari, S.M.M. and Mekhilef, Saad (2015) An improved particle swarm optimization based maximum power point tracking strategy with variable sampling time. International Journal of Electrical Power & Energy Systems, 64. pp. 761-770. ISSN 0142-0615, DOI https://doi.org/10.1016/j.ijepes.2014.07.074.

Mirzaei, M. and Huang, Y.F. and El-Shafie, A. and Shatirah, A. (2015) Application of the generalized likelihood uncertainty estimation (GLUE) approach for assessing uncertainty in hydrological models: A review. Stochastic Environmental Research and Risk Assessment, 29 (5). pp. 1265-1273. ISSN 1436-3240, DOI https://doi.org/10.1007/s00477-014-1000-6.

Mo, K.H. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Yap, S.P. (2015) Feasibility study of high volume slag as cement replacement for sustainable structural lightweight oil palm shell concrete. Journal of Cleaner Production, 91. pp. 297-304. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2014.12.021.

Mo, K.H. and Alengaram, Ubagaram Johnson and Visintin, P. and Goh, S.H. and Jumaat, Mohd Zamin (2015) Influence of lightweight aggregate on the bond properties of concrete with various strength grades. Construction and Building Materials, 84. pp. 377-386. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.03.040.

Mofijur, M. and Masjuki, Haji Hassan and Kalam, M.A. and Rahman, S.M.A. and Mahmudul, H.M. (2015) Energy scenario and biofuel policies and targets in ASEAN countries. Renewable and Sustainable Energy Reviews, 46. pp. 51-61. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.02.020.

Moghaddam, Taher Baghaee and Soltani, Mehrtash and Karim, Mohamed Rehan (2015) Stiffness modulus of Polyethylene Terephthalate modified asphalt mixture: A statistical analysis of the laboratory testing results. Materials & Design, 68. pp. 88-96. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2014.11.044.

Mohammadi, M. and Musa, S.N. and Bahreininejad, A. (2015) Optimization of economic lot scheduling problem with backordering and shelf-life considerations using calibrated metaheuristic algorithms. Applied Mathematics and Computation, 251. pp. 404-422. ISSN 0096-3003, DOI https://doi.org/10.1016/j.amc.2014.11.035.

Mohammadian, E. and Hamidi, H. and Asadullah, M. and Azdarpour, A. and Motamedi, S. and Junin, R. (2015) Measurement of CO2 solubility in NaCl brine solutions at different temperatures and pressures using the potentiometric titration method. Journal of Chemical and Engineering Data, 60 (7). pp. 2042-2049. ISSN 0021-9568, DOI https://doi.org/10.1021/je501172d.

Monajemi, H. and Mazinani, I. and Chao, O.Z. and Yee, K.S. and Kuan, K.K. and Karim, R. (2015) Using local stiffness indicator to examine the effect of honeycombs on the flexural stiffness of reinforced concrete beams. Measurement, 64. pp. 157-162. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2014.12.051.

Moradi, A. and Ataollahi, F. and Sayar, K. and Pramanik, S. and Chong, P.P. and Khalil, A.A. and Kamarul, Tunku and Pingguan-Murphy, Belinda (2015) Chondrogenic potential of physically treated bovine cartilage matrix derived porous scaffolds on human dermal fibroblast cells. Journal of Biomedical Materials Research Part A, 104 (1). pp. 245-256. ISSN 1549-3296, DOI https://doi.org/10.1002/jbm.a.35561.

Moshwan, R. and Rahmat, S.M. and Yusof, F. and Hassan, M.A. and Hamdi, M. and Fadzil, M. (2015) Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy. International Journal of Materials Research, 106 (3). pp. 258-266. ISSN 1862-5282, DOI https://doi.org/10.3139/146.111172.

Moshwan, Raza and Yusof, Farazila and Hassan, Mohamed Mohsen Abdel-Naeim and Rahmat, Sahifulddin M. (2015) Effect of tool rotational speed on force generation, microstructure and mechanical properties of friction stir welded Al-Mg-Cr-Mn (AA 5052-O) alloy. Materials & Design, 66. pp. 118-128. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2014.10.043.

Mostafizur, R.M. and Saidur, Rahman and Abdul Raman, Abdul Aziz and Bhuiyan, M.H.U. (2015) Thermophysical properties of methanol based Al2O3 nanofluids. International Journal of Heat and Mass Transfer, 85. pp. 414-419. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2015.01.075.

Mubarak, N.M. and Sahu, J.N. and Abdullah, E.C. and Jayakumar, N.S. and Ganesan, P. (2015) Microwave assisted multiwall carbon nanotubes enhancing Cd(II) adsorption capacity in aqueous media. Journal of Industrial and Engineering Chemistry, 24. pp. 24-33. ISSN 1226-086X, DOI https://doi.org/10.1016/j.jiec.2014.09.005.

Mubin, A.S.A. and Ahmad, N. and Mamat, A. and Taha, Z. and Hasanuddin, I. (2015) CFD study of drag and lift of sepak takraw ball at different face orientations. Advances in Mechanical Engineering, 7 (1). p. 9. ISSN 1687-8132, DOI https://doi.org/10.1155/2014/369137.

Mukherjee, S. and Mukhopadhyay, S. and Hashim, M.A. and Sen Gupta, B. (2015) Contemporary environmental issues of landfill leachate: Assessment and remedies. Contemporary environmental issues of landfill leachate: assessment & remedies, 45 (5). pp. 472-590. ISSN 1064-3389, DOI https://doi.org/10.1080/10643389.2013.876524.

Mukhopadhyay, S. and Hashim, M.A. and Allen, M. and Sen Gupta, B. (2015) Arsenic removal from soil with high iron content using a natural surfactant and phosphate. International Journal of Environmental Science and Technology, 12 (2). pp. 617-632. ISSN 1735-1472, DOI https://doi.org/10.1007/s13762-013-0441-7.

Mukhopadhyay, S. and Mukherjee, S. and Hashim, Mohd Ali and Sen Gupta, B. (2015) Application of colloidal gas aphron suspensions produced from Sapindus mukorossi for arsenic removal from contaminated soil. Chemosphere, 119. pp. 355-362. ISSN 0045-6535, DOI https://doi.org/10.1016/j.chemosphere.2014.06.087.

Muslimin, M. and Wilson, J.J. and Ghazali, A.R. and Braima, K.A. and Jeffery, J. and Wan-Nor, F. and Alaa-Eldin, M.E. and Mohd-Zin, S.W. and Wan-Yusoff, W.S. and Norma-Rashid, Y. and Lau, Y.L. and Rohela, M. and Abdul-Aziz, N.M. (2015) First report of brown widow spider sightings in Peninsular Malaysia and notes on its global distribution. Journal of Venomous Animals and Toxins including Tropical Diseases, 21. p. 8. ISSN 1678-9199, DOI https://doi.org/10.1186/s40409-015-0010-2.

Mustayen, A.G.M.B. and Rahman, M.M. and Mekhilef, Saad and Saidur, R. (2015) Performance evaluation of a solar powered air dryer for white oyster mushroom drying. International Journal of Green Energy, 12 (11). pp. 1113-1121. ISSN 1543-5075, DOI https://doi.org/10.1080/15435075.2014.891221.

Naderi, Sadjad and Hassan, Mohamed Mohsen Abdel-Naeim and Bushroa, Abdul Razak (2015) Alternative methods to determine the elastoplastic properties of sintered hydroxyapatite from nanoindentation testing. Materials & Design, 67. pp. 360-368. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2014.11.030.

Nagara, Genia and Lam, Wei Haur and Lee, Nasha Chia Hwee and Othman, Faridah and Shaaban, Md Ghazaly (2015) Comparative SWOT analysis for water solutions in Asia and Africa. Water Resources Management, 29 (1). pp. 125-138. ISSN 0920-4741, DOI https://doi.org/10.1007/s11269-014-0831-8.

Narrein, K. and Sivasankaran, S. and Ganesan, P. (2015) Two-phase analysis of a helical microchannel heat sink using nanofluids. Numerical Heat Transfer, Part A: Applications, 68 (11). pp. 1266-1279. ISSN 1040-7782, DOI https://doi.org/10.1080/10407782.2015.1032017.

Nasiri-Tabrizi, B. and Zalnezhad, E. and Pingguan-Murphy, Belinda and Basirun, Wan Jefrey and Hamouda, A.M.S. and Baradaran, S. (2015) Structural and morphological study of mechanochemically synthesized crystalline nanoneedles of Zr-doped carbonated chlorapatite. Materials Letters, 149. pp. 100-104. ISSN 0167-577X, DOI https://doi.org/10.1016/j.matlet.2015.02.125.

Nee, L.S. and Khalil, M. and Jan, B.M. and Ali, B.S. (2015) Lightweight biopolymer drilling fluid for underbalanced drilling: An optimization study. Journal of Petroleum Science and Engineering, 129. pp. 178-188. ISSN 0920-4105, DOI https://doi.org/10.1016/j.petrol.2015.03.006.

Ng, C.G. and Yusoff, S. (2015) Assessment of GHG emission reduction potential from source-separated organic waste (SOW) management: Case study in a higher educational institution in Malaysia. Sains Malaysiana, 44 (2). pp. 193-201. ISSN 0126-6039,

Ng, Yee Sern and Sen Gupta, B. and Hashim, Mohd Ali (2015) Effects of operating parameters on the performance of washing-electrokinetic two stage process as soil remediation method for lead removal. Separation and Purification Technology, 156 (2). pp. 403-413. ISSN 1383-5866, DOI https://doi.org/10.1016/j.seppur.2015.10.029.

Ooi, M.E. and Sayuti, Mohd and Sarhan, A.A.D. (2015) Fuzzy logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of aerospace AL tempered grade 6061. Journal of Cleaner Production, 89. pp. 286-295. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2014.11.006.

Oshkour, Azim Ataollahi and Pramanik, Sumit and Mehrali, Mehdi and Yau, Yat Huang and Tarlochan, Faris and Abu Osman, Noor Azuan (2015) Mechanical and physical behavior of newly developed functionally graded materials and composites of stainless steel 316L with calcium silicate and hydroxyapatite. Journal of the Mechanical Behavior of Biomedical Materials, 49. pp. 321-331. ISSN 1751-6161, DOI https://doi.org/10.1016/j.jmbbm.2015.05.020.

Pai, Y.S. and Yap, H.J. and Singh, R. (2015) Augmented reality-based programming, planning and simulation of a robotic work cell. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 229 (6). pp. 1029-1045. ISSN 0954-4054, DOI https://doi.org/10.1177/0954405414534642.

Palash, S.M. and Masjuki, Haji Hassan and Kalam, Md. Abul and Atabani, A.E. and Fattah, I.M.R. and Sanjid, Ahmed (2015) Biodiesel production, characterization, diesel engine performance, and emission characteristics of methyl esters from aphanamixis polystachya oil of Bangladesh. Energy Conversion and Management, 91. pp. 149-157. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.12.009.

Panjehpour, M. and Chai, H.K. and Voo, Y.L. (2015) Refinement of strut-and-tie model for reinforced concrete deep beams. PLoS ONE, 10 (6). p. 17. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0130734.

Paul, M.C. and Dhar, A. and Das, S. and Latiff, A.A. and Ahmad, M.T. and Harun, Sulaiman Wadi (2015) Development of nanoengineered thulium-doped fiber laser with low threshold pump power and tunable operating wavelength. IEEE Photonics Journal, 7 (1). ISSN 1943-0655, DOI https://doi.org/10.1109/Jphot.2015.2399357.

Peake, N.J. and Pavlov, A.M. and D'Souza, A. and Pingguan-Murphy, Belinda and Sukhorukov, G.B. and Hobbs, A.J. and Chowdhury, T.T. (2015) Controlled release of C-type natriuretic peptide by microencapsulation dampens proinflammatory effects induced by IL-1 beta in cartilage explants. Biomacromolecules, 16 (2). pp. 524-531. ISSN 1525-7797, DOI https://doi.org/10.1021/bm501575w.

Puvaneswary, S. and Talebian, S. and Raghavendran, H.B. and Murali, M.R. and Mehrali, M. and Afifi, A.M. and Abu Kasim, N.H. and Kamarul, Tunku (2015) Fabrication and in vitro biological activity of βTCP-Chitosan-Fucoidan composite for bone tissue engineering. Carbohydrate Polymers, 134. pp. 799-807. ISSN 0144-8617, DOI https://doi.org/10.1016/j.carbpol.2015.07.098.

Qeshta, I.M.I. and Shafigh, P. and Jumaat, Mohd Zamin (2015) Flexural behaviour of RC beams strengthened with wire mesh-epoxy composite. Construction and Building Materials, 79. pp. 104-114. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.01.013.

Qi, H. and Huang, G.Y. and Han, Y.L. and Zhang, X.H. and Li, Y.H. and Pingguan-Murphy, Belinda and Lu, T.J. and Xu, F. and Wang, L. (2015) Engineering artificial machines from designable DNA materials for biomedical applications. Tissue Engineering Part B-Reviews, 21 (3). pp. 288-297. ISSN 1937-3368, DOI https://doi.org/10.1089/ten.TEB.2014.0494.

Rabuni, M.F. and Nik Sulaiman, N.M. and Aroua, Mohamed Kheireddine and Ching, Yern Chee and Hashim, Nur Awanis (2015) Impact of in situ physical and chemical cleaning on PVDF membrane properties and performances. Chemical Engineering Science, 122. pp. 426-435. ISSN 0009-2509, DOI https://doi.org/10.1016/j.ces.2014.09.053.

Radjai, T. and Gaubert, J.P. and Rahmani, L. and Mekhilef, Saad (2015) Experimental verification of P&O MPPT algorithm with direct control based on Fuzzy logic control using CUK converter. International Transactions on Electrical Energy Systems, 25 (12). pp. 3492-3508. ISSN 2050-7038, DOI https://doi.org/10.1002/etep.2047.

Rafieerad, A.R. and Zalnezhad, E. and Bushroa, A.R. and Hamouda, A.M.S. and Sarraf, M. and Nasiri-Tabrizi, B. (2015) Self-organized TiO2 nanotube layer on Ti–6Al–7Nb for biomedical application. Surface and Coatings Technology, 265. pp. 24-31. ISSN 0257-8972, DOI https://doi.org/10.1016/j.surfcoat.2015.01.067.

Rahim, R. and Abdul Raman, Abdul Aziz (2015) Cleaner production implementation in a fruit juice production plant. Journal of Cleaner Production, 101. pp. 215-221. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2015.03.065.

Rahman, A.M.S. and Chia, P.Y. and Haseeb, A.S. Md. Abdul (2015) Mechanical properties of intermetallic compounds in electrodeposited multilayered thin film at small scale by nanoindentation. Materials Letters, 147. pp. 50-53. ISSN 0167-577X, DOI https://doi.org/10.1016/j.matlet.2015.01.127.

Rahman, M.D.A. and Said, S.M. and Balamurugan, S. (2015) Blue phase liquid crystal: Strategies for phase stabilization and device development. Science and Technology of Advanced Materials, 16 (3). p. 21. ISSN 1468-6996, DOI https://doi.org/10.1088/1468-6996/16/3/033501.

Rahman, M.M. and Jumaat, Mohd Zamin and Rahman, M.A. and Qeshta, I.M.I. (2015) Innovative hybrid bonding method for strengthening reinforced concrete beam in flexure. Construction and Building Materials, 79. pp. 370-378. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2014.12.081.

Rahman, M.M. and Mustayen, A.G.M.B. and Mekhilef, Saad and Saidur, R. (2015) The optimization of solar drying of grain by using a genetic algorithm. International Journal of Green Energy, 12 (12). pp. 1222-1231. ISSN 1543-5075, DOI https://doi.org/10.1080/15435075.2014.890106.

Rahman, M.M. and Oztop, H.F. and Mekhilef, Saad and Saidur, R. and Orfi, J. (2015) Simulation of unsteady heat and mass transport with heatline and massline in a partially heated open cavity. Applied Mathematical Modelling, 39 (5-6). pp. 1597-1615. ISSN 0307-904X, DOI https://doi.org/10.1016/j.apm.2014.09.022.

Rahman, M.M. and Saha, S. and Mojumder, S. and Naim, A.G. and Saidur, R. and Ibrahim, T.A. (2015) Effect of sine-squared thermal boundary condition on augmentation of heat transfer in a triangular solar collector filled with different nanofluids. Numerical Heat Transfer Part B-Fundamentals, 68 (1). pp. 53-74. ISSN 1040-7790, DOI https://doi.org/10.1080/10407790.2014.992058.

Rakhshandehroo, M. and Yusof, M.J.M. and Ale Ebrahim, N. and Sharghi, A. and Arabi, R. (2015) 100 most cited articles in urban green and open spaces: A bibliometric analysis. Current World Environment, 10 (2). pp. 445-455. ISSN 0973-4929, DOI https://doi.org/10.12944/CWE.10.2.08.

Rakib, Muhammad Iftekharul and Choudhury, Imtiaz Ahmed and Hussain, Sajjad and Abu Osman, Noor Azuan (2015) Design and biomechanical performance analysis of a user-friendly orthotic device. Materials & Design, 65. pp. 716-725. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2014.09.075.

Ramli, R. and Arof, Hamzah and Ibrahim, Fatimah and Idris, Mohd Yamani Idna and Khairuddin, A.S.M. (2015) Classification of eyelid position and eyeball movement using EEG signals. Malaysian Journal of Computer Science, 28 (1). pp. 28-45. ISSN 0127-9084,

Ramli, R. and Arof, Hamzah and Ibrahim, Fatimah and Mokhtar, Norrima and Idris, Mohd Yamani Idna (2015) Using finite state machine and a hybrid of EEG signal and EOG artifacts for an asynchronous wheelchair navigation. Expert Systems with Applications, 42 (5). pp. 2451-2463. ISSN 0957-4174, DOI https://doi.org/10.1016/j.eswa.2014.10.052.

Rashedul, H.K. and Masjuki, Haji Hassan and Kalam, Md. Abul and Teoh, Y.H. and How, H.G. and Fattah, I.M.R. (2015) Effect of antioxidant on the oxidation stability and combustion-performance-emission characteristics of a diesel engine fueled with diesel-biodiesel blend. Energy Conversion and Management, 106. pp. 849-858. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.10.024.

Rashidi, H.R. and Sulaiman, N.M.N. and Hashim, N.A. and Hassan, C.R.C. and Ramli, M.R. (2015) Synthetic reactive dye wastewater treatment by using nano-membrane filtration. Desalination and Water Treatment, 55 (1). pp. 86-95. ISSN 1944-3994, DOI https://doi.org/10.1080/19443994.2014.912964.

Raymond, W.J.K. and Illias, Hazlee Azil and Bakar, Ab Halim Abu and Mokhlis, Hazlie (2015) Partial discharge classifications: Review of recent progress. Measurement, 68. pp. 164-181. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2015.02.032.

Raza, S. and Mokhlis, Hazlie and Arof, Hamzah and Laghari, J.A. and Wang, L. (2015) Application of signal processing techniques for islanding detection of distributed generation in distribution network : A review. Energy Conversion and Management, 96. pp. 613-624. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.03.029.

Reham, S.S. and Masjuki, Haji Hassan and Kalam, Md. Abul and Shancita, I. and Fattah, I.M.R. and Ruhul, A.M. (2015) Study on stability, fuel properties, engine combustion, performance and emission characteristics of biofuel emulsion. Renewable and Sustainable Energy Reviews, 52. pp. 1566-1579. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.08.013.

Rifat, A.A. and Mahdiraji, Ghafour Amouzad and Chow, D.M. and Shee, Yu Gang and Ahmed, R. and Adikan, Faisal Rafiq Mahamd (2015) Photonic crystal fiber-based surface plasmon resonance sensor with selective analyte channels and graphene-silver deposited core. Sensors, 15 (5). pp. 11499-11510. ISSN 1424-8220, DOI https://doi.org/10.3390/s150511499.

Rolak, M. and Che, H.S. and Malinowski, M. (2015) Modelling and fault-tolerant control of 5-phase induction machine. Bulletin of the Polish Academy of Sciences Technical Sciences, 63 (4). pp. 997-1006. ISSN 0239-7528, DOI https://doi.org/10.1515/bpasts-2015-0113.

Rosdin, R.Z.R. and Ali, N.M. and Arof, Hamzah and Harun, Sulaiman Wadi (2015) A passively harmonically mode-locked soliton erbium-doped fiber laser with low pumping threshold using a single-walled carbon nanotubes. Microwave and Optical Technology Letters, 57 (4). pp. 799-803. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.28964.

Roy, S. and Ramiah, H. and Reza, A.W. (2015) Designing a new high gain CMOS amplifier towards a 17.22 MHz MEMS based Si oscillator for a cost effective clock generator IC. IEICE Electronics Express, 12 (10). p. 8. ISSN 1349-2543, DOI https://doi.org/10.1587/elex.12.20150272.

Ruthiraan, M. and Mubarak, N.M. and Thines, R.K. and Abdullah, E.C. and Sahu, J.N. and Jayakumar, N.S. and Ganesan, P. (2015) Comparative kinetic study of functionalized carbon nanotubes and magnetic biochar for removal of Cd2+ ions from wastewater. Korean Journal of Chemical Engineering, 32 (3). pp. 446-457. ISSN 0256-1115, DOI https://doi.org/10.1007/s11814-014-0260-7.

Sabran, M.B.S. and Jusoh, Z. and Babar, I.M. and Ahmad, Harith and Harun, Sulaiman Wadi (2015) Dual-wavelength passively Q-switched erbium ytterbium codoped fiber laser based on a nonlinear polarization rotation technique. Microwave and Optical Technology Letters, 57 (3). pp. 530-533. ISSN 0895-2477, DOI https://doi.org/10.1002/Mop.28895.

Sabri, M.F.M. and Ono, T. and Said, S.M. and Kawai, Y. and Esashi, M. (2015) Fabrication and characterization of microstacked PZT actuator for MEMS applications. Journal of Microelectromechanical Systems, 24 (1). pp. 80-90. ISSN 1057-7157, DOI https://doi.org/10.1109/Jmems.2014.2317495.

Sadeghinezhad, E. and Togun, H. and Mehrali, M. and Nejad, P.S. and Latibari, S.T. and Abdulrazzaq, T. and Kazi, Salim Newaz and Metselaar, H.S.C. (2015) An experimental and numerical investigation of heat transfer enhancement for graphene nanoplatelets nanofluids in turbulent flow conditions. International Journal of Heat and Mass Transfer, 81. pp. 41-51. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2014.10.006.

Said, S.H. and Razak, Hashim Abdul (2015) The effect of synthetic polyethylene fiber on the strain hardening behavior of engineered cementitious composite (ECC). Materials & Design, 86. pp. 447-457. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2015.07.125.

Said, S.H. and Razak, Hashim Abdul and Othman, I. (2015) Flexural behavior of engineered cementitious composite (ECC) slabs with polyvinyl alcohol fibers. Construction and Building Materials, 75. pp. 176-188. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2014.10.036.

Said, Z. and Sabiha, M.A. and Saidur, Rahman and Hepbasli, A. and Rahim, Nasrudin Abd and Mekhilef, Saad and Ward, T.A. (2015) Performance enhancement of a flat plate solar collector using titanium dioxide nanofluid and polyethylene glycol dispersant. Journal of Cleaner Production, 92. pp. 343-353. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2015.01.007.

Said, Z. and Sajid, M.H. and Saidur, R. and Mahdiraji, G.A. and Rahim, N.A. (2015) Evaluating the optical properties of TiO2 nanofluid for a direct absorption solar collector. Numerical Heat Transfer, Part A: Applications, 67 (9). pp. 1010-1027. ISSN 1040-7782, DOI https://doi.org/10.1080/10407782.2014.955344.

Saidin, N. and Harun, Sulaiman Wadi and Ahmad, Harith and Ali, S.M.M. and Damanhuri, S.S.A. and Halder, A. and Paul, M.C. and Das, S. and Pal, M. and Bhadra, S.K. (2015) Enhancement of thulium-Ytterbium doped fiber laser efficiency using dual-pumping method. Microwave and Optical Technology Letters, 57 (2). pp. 285-287. ISSN 0895-2477, DOI https://doi.org/10.1002/Mop.28827.

Sairi, Nor Asrina and Abd Ghani, N. and Aroua, M.K. and Yusoff, R. and Alias, Y. (2015) Low pressure solubilities of CO2 in guanidinium trifluoromethanesulfonate-MDEA systems. Fluid Phase Equilibria, 385. pp. 79-91. ISSN 0378-3812, DOI https://doi.org/10.1016/j.fluid.2014.11.009.

Sajjadi, B. and Abdul Raman, Abdul Aziz and Ibrahim, Shaliza (2015) Influence of ultrasound power on acoustic streaming and micro-bubbles formations in a low frequency sono-reactor: Mathematical and 3D computational simulation. Ultrasonics Sonochemistry, 24. pp. 193-203. ISSN 1350-4177, DOI https://doi.org/10.1016/j.ultsonch.2014.11.013.

Sajjadi, B. and Abdul Raman, Abdul Aziz and Ibrahim, Shaliza (2015) Mechanistic analysis of cavitation assisted transesterification on biodiesel characteristics. Ultrasonics Sonochemistry, 22. pp. 463-473. ISSN 1350-4177, DOI https://doi.org/10.1016/j.ultsonch.2014.06.004.

Salaheldeen, M. and Aroua, Mohamed Kheireddine and Mariod, A.A. and Cheng, Sit Foon and Abdelrahman, M.A. and Atabani, A.E. (2015) Physicochemical characterization and thermal behavior of biodiesel and biodiesel diesel blends derived from crude Moringa peregrina seed oil. Energy Conversion and Management, 92. pp. 535-542. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.12.087.

Sanjid, A. and Masjuki, Haji Hassan and Kalam, M.A. and Rahman, S.M.A. and Abedin, M.J. and Fattah, I.M.R. (2015) Characterization and prediction of blend properties and evaluation of engine performance and emission parameters of a CI engine operated with various biodiesel blends. RSC Advances, 5 (17). pp. 13246-13255. ISSN 2046-2069, DOI https://doi.org/10.1039/C4ra14748k.

Sarhan, A.A.D. and Matsubara, A. (2015) Investigation about the characterization of machine tool spindle stiffness for intelligent CNC end milling. Robotics and Computer-Integrated Manufacturing, 34. pp. 133-139. ISSN 0736-5845, DOI https://doi.org/10.1016/j.rcim.2014.12.001.

Seera, M. and Lim, C.P. and Liew, W.S. and Lim, E. and Loo, C.K. (2015) Classification of electrocardiogram and auscultatory blood pressure signals using machine learning models. Expert Systems with Applications, 42 (7). pp. 3643-3652. ISSN 0957-4174, DOI https://doi.org/10.1016/j.eswa.2014.12.023.

Seiffert, J. and Hussain, F. and Wiegman, C. and Li, F. and Bey, L. and Baker, W. and Porter, A. and Ryan, M.P. and Chang, Y. and Gow, A. and Zhang, J.F. and Zhu, J. and Tetley, T.D. and Chung, K.F. (2015) Pulmonary toxicity of instilled silver nanoparticles: Influence of size, coating and rat strain. PLoS ONE, 10 (3). p. 17. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0119726.

Shafeeyan, M.S. and Daud, W.M.A.W. and Shamiri, A. and Aghamohammadi, N. (2015) Adsorption equilibrium of carbon dioxide on ammonia-modified activated carbon. Chemical Engineering Research and Design, 104. pp. 42-52. DOI https://doi.org/10.1016/j.cherd.2015.07.018.

Shafeeyan, M.S. and Daud, W.M.A.W. and Shamiri, A. and Aghamohammadi, N. (2015) Modeling of carbon dioxide adsorption onto ammonia-modified activated carbon: Kinetic analysis and breakthrough behavior. Energy & Fuels, 29 (10). pp. 6565-6577.

Shahbazi-Moghadam, M. and Salehi, H. and Ale Ebrahim, N. and Mohammadjafari, M. and Gholizadeh, H. (2015) Effective factors for increasing university publication and citation rate. Asian Social Science, 11 (16). pp. 338-348. ISSN 1911-2017, DOI https://doi.org/10.5539/ass.v11n16p338.

Shakib, M.N. and Moghavvemi, M. and Mahadi, W.N.L. (2015) Design of a compact planar antenna for ultra-wideband operation. Applied Computational Electromagnetics Society Journal, 30 (2). pp. 222-229. ISSN 1054-4887,

Shamiri, Ahmad and Wong, S.W. and Zanil, M.F. and Hussain, Mohd Azlan and Mostoufi, N. (2015) Modified two-phase model with hybrid control for gas phase propylene copolymerization in fluidized bed reactors. Chemical Engineering Journal, 264. pp. 706-719. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2014.11.104.

Sharma, R.K. and Ganesan, Poo Balan and Tyagi, V.V. and Metselaar, H.S.C. and Sandaran, S.C. (2015) Developments in organic solid-liquid phase change materials and their applications in thermal energy storage. Energy Conversion and Management, 95. pp. 193-228. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.01.084.

Shawon, M.J. and Mahdiraji, G.A. and Hasan, M.M. and Shakibaei, B.H. and Gang, S.Y. and Mahdy, M.R.C. and Adikan, Faisal Rafiq Mahamd (2015) Single Negative Metamaterial-Based Hollow-Core Bandgap Fiber With Multilayer Cladding. IEEE Photonics Journal, 7 (6). ISSN 1943-0655, DOI https://doi.org/10.1109/JPHOT.2015.2496399.

Shirazi, F.S. and Mehrali, M. and Oshkour, A.A. and Metselaar, H.S.C. and Kadri, Nahrizul Adib and Abu Osman, Noor Azuan (2015) Characterization and mechanical properties of calcium silicate/citric acid-based polymer composite materials. International Journal of Applied Ceramic Technology, 12 (2). pp. 371-376. ISSN 1546-542X, DOI https://doi.org/10.1111/Ijac.12151.

Shirazi, M.R. and Harun, Sulaiman Wadi and Ahmad, Harith (2015) Effective use of an EDFA and Raman pump residual powers via a Bi-EDF in L-band multi-wavelength fiber laser generation. Laser Physics, 25 (1). ISSN 1054-660X, DOI https://doi.org/10.1088/1054-660x/25/1/015104.

Shirazi, M.R. and Taib, J.M. and De La Rue, R.M. and Harun, Sulaiman Wadi and Ahmad, Harith (2015) Dynamic characteristics of a multi-wavelength Brillouin-Raman fiber laser assisted by multiple four-wave mixing processes in a ring cavity. Optics & Laser Technology, 66. pp. 63-67. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2014.08.011.

Shnawah, D.A. and Sabri, M.F.M. and Badruddin, I.A. and Said, S.M. and Bashir, M.B.A. and Sharif, N.M. and Elsheikh, M.H. (2015) Study on coarsening of Ag3Sn intermetallic compound in the Fe-modified Sn-1Ag-0.5Cu solder alloys. Journal of Alloys and Compounds, 622. pp. 184-188. ISSN 0925-8388, DOI https://doi.org/10.1016/j.jallcom.2014.10.042.

Solaymani, S. and Kardooni, R. and Yusoff, S. and Kari, F. (2015) The impacts of climate change policies on the transportation sector. Energy, 81. pp. 719-728. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2015.01.017.

Sulaiman, A. and Soo, M.J. and Yoon, M.M.L. and Farid, M. and Silva, F.V.M. (2015) Modeling the polyphenoloxidase inactivation kinetics in pear, apple and strawberry purees after high pressure processing. Journal of Food Engineering, 147. pp. 89-94. ISSN 0260-8774, DOI https://doi.org/10.1016/j.jfoodeng.2014.09.030.

Syaima, M.T.S. and Ong, K.H. and Noor, Ishenny Mohd and Zamratul, M.I.M. and Brahim, S.A. and Hafizul, M.M. (2015) The synthesis of bio-lubricant based oil by hydrolysis and non-catalytic of palm oil mill effluent (POME) using lipase. Renewable and Sustainable Energy Reviews, 44. pp. 669-675. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.01.005.

Tahriri, F. and Mousavi, M. and Yap, H.J. and Zawiah, M.D.S. and Taha, Z. (2015) Optimizing the robot arm movement time using virtual reality robotic teaching system. International Journal of Simulation Modelling, 14 (1). pp. 28-38. ISSN 1726-4529, DOI https://doi.org/10.2507/Ijsimm14(1)3.273.

Tamrin, K.F. and Nukman, Y. and Choudhury, I.A. and Shirley, S. (2015) Multiple-objective optimization in precision laser cutting of different thermoplastics. Optics and Lasers in Engineering, 67. pp. 57-65. ISSN 0143-8166, DOI https://doi.org/10.1016/j.optlaseng.2014.11.001.

Tan, C.Y. and Ramesh, S. and Teh, Y.C. and Tan, Y.M. and Yap, B.K. (2015) The effects of calcium-to-phosphorus ratio on the densification and mechanical properties of hydroxyapatite ceramic. International Journal of Applied Ceramic Technology, 12 (1). pp. 223-227. ISSN 1546-542X, DOI https://doi.org/10.1111/ijac.12249.

Tan, K.S. and Wong, Y.H. and Cheong, K.Y. (2015) Thermal characteristic of sintered Ag-Cu nanopaste for high-temperature die-attach application. International Journal of Thermal Sciences, 87. pp. 169-177. ISSN 1290-0729, DOI https://doi.org/10.1016/j.ijthermalsci.2014.08.022.

Tan, Sin Jin and Tiu, Zian Cheak and Harun, Sulaiman Wadi and Ahmad, Harith (2015) Sideband-controllable soliton pulse with bismuth-based erbium-doped fiber. Chinese Optics Letters, 13 (11). pp. 111406-111408. ISSN 1671-7694, DOI https://doi.org/10.3788/COL201513.111406.

Taur, A. and Doshi, P. and Yeoh, Hak Koon (2015) Dripping dynamics of Newtonian liquids from a tilted nozzle. European Journal of Mechanics B-Fluids, 51. pp. 8-15. ISSN 0997-7546, DOI https://doi.org/10.1016/j.euromechflu.2014.12.004.

Tawfiq, M.F. and Aroua, M.K. and Sulaiman, N.M.N. (2015) On-line CO, CO2 emissions evaluation and (benzene, toluene, xylene) determination from experimental burn of tropical biomass. Journal of Environmental Sciences, 33. pp. 239-244. ISSN 1001-0742, DOI https://doi.org/10.1016/j.jes.2015.01.015.

Tay, S.L. and Wang, Y. and Wei, X. and Gao, W. (2015) Effects of bismuth addition and electrodeposition processing on Zn-based coatings. International Journal of Modern Physics B (ijmpb), 29 (10n11). p. 1540010. ISSN 0217-9792, DOI https://doi.org/10.1142/S021797921540010X.

Teh, S.J. and Hamid, Sharifah Bee Abd and Lai, C.W. and Lim, Y.S. (2015) ZnCl2/NaCl-Catalysed Hydrothermal Carbonization of Glucose and Oil Palm Shell Fiber. Nanoscience and Nanotechnology Letters, 7 (7). pp. 611-615. ISSN 1941-4900, DOI https://doi.org/10.1166/nnl.2015.2000.

Teoh, K.H. and Lim, C.S. and Liew, C.W. and Ramesh, S. and Ramesh, S. (2015) Electric double-layer capacitors with corn starch-based biopolymer electrolytes incorporating silica as filler. Ionics, 21 (7). pp. 2061-2068. ISSN 0947-7047, DOI https://doi.org/10.1007/s11581-014-1359-x.

Teoh, Y.H. and Masjuki, Haji Hassan and Kalam, M.A. and How, H.G. (2015) Comparative assessment of performance, emissions and combustion characteristics of gasoline/diesel and gasoline/biodiesel in a dual-fuel engine. RSC Advances, 5 (88). pp. 71608-71619. ISSN 2046-2069, DOI https://doi.org/10.1039/c5ra14624k.

Teoh, Y.H. and Masjuki, Haji Hassan and Kalam, M.A. and How, H.G. (2015) Effect of injection timing and EGR on engine-out-responses of a common-rail diesel engine fueled with neat biodiesel. RSC Advances, 5 (116). pp. 96080-96096. ISSN 2046-2069, DOI https://doi.org/10.1039/c5ra14831f.

Teoh, Y.H. and Masjuki, Haji Hassan and Noor, I.M. and Ali, B.S. and Kalam, M.A. and How, H.G. (2015) Evaluation of a novel biofuel from unwanted waste and its impact on engine performance, emissions, and combustion characteristics in a diesel engine. RSC Advances, 5 (53). pp. 42438-42447. ISSN 2046-2069, DOI https://doi.org/10.1039/c5ra04294a.

Tham, M.L. and Chow, C.O. and Xu, Y.H. (2015) Impact of Random Packet Arrival on the Performance of Video Streaming over OFDMA Downlink Systems. Wireless Personal Communications, 85 (3). pp. 655-669. ISSN 0929-6212, DOI https://doi.org/10.1007/s11277-015-2800-9.

Thangalazhy-Gopakumar, S. and Al-Nadheri, W.M.A. and Jegarajan, D. and Sahu, J.N. and Mubarak, N.M. and Nizamuddin, S. (2015) Utilization of palm oil sludge through pyrolysis for bio-oil and bio-char production. Bioresource Technology, 178. pp. 65-69. ISSN 0960-8524, DOI https://doi.org/10.1016/j.biortech.2014.09.068.

Tharsika, T. and Haseeb, A.S. Md. Abdul and Akbar, S.A. and Sabri, M.F.M. and Wong, Y.H. (2015) Gas sensing properties of zinc stannate (Zn2SnO4) nanowires prepared by carbon, assisted thermal evaporation process. Journal of Alloys and Compounds, 618. pp. 455-462. ISSN 0925-8388, DOI https://doi.org/10.1016/j.jallcom.2014.08.192.

Tharsika, T. and Haseeb, A.S. Md. Abdul and Akbar, S.A. and Thanihaichelvan, M. (2015) Tailoring ZnO nanostructures by spray pyrolysis and thermal annealing. Ceramics International, 41 (3). pp. 5205-5211. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2014.12.062.

Tiu, Z.C. and Ahmad, F. and Tan, S.J. and Ahmad, Harith and Harun, Sulaiman Wadi (2015) Multi-wavelength Q-switched Erbium-doped fiber laser with photonic crystal fiber and graphene – Polyethylene oxide saturable absorber. Optik, 126 (17). pp. 1495-1498. ISSN 0030-4026, DOI https://doi.org/10.1016/j.ijleo.2015.04.036.

Tiu, Zian Cheak and Suthaskumar, M. and Zarei, A. and Tan, S.J. and Ahmad, Harith and Harun, Sulaiman Wadi (2015) Generation of switchable domain wall and Cubic–Quintic nonlinear Schrödinger equation dark pulse. Optics & Laser Technology, 73. pp. 127-129. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2015.04.010.

Tiu, Zian Cheak and Zarei, A. and Tan, S.J. and Ahmad, Harith and Harun, Sulaiman Wadi (2015) Harmonic Dark Pulse Emission in Erbium-Doped Fiber Laser. Chinese Physics Letters, 32 (3). 034203. ISSN 0256-307X, DOI https://doi.org/10.1088/0256-307X/32/3/034203.

Togun, H. and Ahmadi, G. and Abdulrazzaq, T. and Shkarah, A.J. and Kazi, Salim Newaz and Badarudin, Ahmad and Safaei, M.R. (2015) Thermal performance of nanofluid in ducts with double forward-facing steps. Journal of the Taiwan Institute of Chemical Engineers, 47. pp. 28-42. ISSN 1876-1070, DOI https://doi.org/10.1016/j.jtice.2014.10.009.

Tonekabonimoghadam, S. and Akikur, R.K. and Hussain, Mohd Azlan and Hajimolana, S. and Saidur, R. and Ping, H.W. and Chakrabarti, M.H. and Brandon, N.P. and Aravind, P.V. and Nayagar, J.N.S. and Hashim, Mohd Ali (2015) Mathematical modelling and experimental validation of an anode-supported tubular solid oxide fuel cell for heat and power generation. Energy, 90. pp. 1759-1768. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2015.06.135.

Tripathi, M. and Sahu, J.N. and Ganesan, P. and Dey, T.K. (2015) Effect of temperature on dielectric properties and penetration depth of oil palm shell (OPS) and OPS char synthesized by microwave pyrolysis of OPS. Fuel, 153. pp. 257-266. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2015.02.118.

Tripathi, M. and Sahu, J.N. and Ganesan, P. and Monash, P. and Dey, T.K. (2015) Effect of microwave frequency on dielectric properties of oil palm shell (OPS) and OPS char synthesized by microwave pyrolysis of OPS. Journal of Analytical and Applied Pyrolysis, 112. pp. 306-312. ISSN 0165-2370, DOI https://doi.org/10.1016/j.jaap.2015.01.007.

Tsai, H.W. and Yaghoubi, A. and Chan, T.C. and Wang, C.C. and Liu, W.T. and Liao, C.N. and Lu, S.Y. and Chen, L.J. and Chueh, Y.L. (2015) Electrochemical synthesis of ultrafast and gram-scale surfactant-free tellurium nanowires by gas–solid transformation and their applications as supercapacitor electrodes for p-doping of graphene transistors. Nanoscale, 7 (17). pp. 7535-7539. ISSN 2040-3364, DOI https://doi.org/10.1039/c5nr00876j.

Tuan Zahari, Tuan Zaharinie and Huda, Z. and Izuan, M.F. and Abd Shukor, Mohd Hamdi (2015) Development of optimum process parameters and a study of the effects of surface roughness on brazing of copper. Applied Surface Science, 331. pp. 127-131. ISSN 0169-4332, DOI https://doi.org/10.1016/j.apsusc.2015.01.078.

Uddin, M. and Mekhilef, Saad and Rivera, M. (2015) Experimental validation of minimum cost function-based model predictive converter control with efficient reference tracking. IET Power Electronics, 8 (2). pp. 278-287. ISSN 1755-4543, DOI https://doi.org/10.1049/iet-pel.2014.0368.

Uddin, M. and Mekhilef, Saad and Rivera, M. and Rodriguez, J. (2015) Imposed weighting factor optimization method for torque ripple reduction of IM fed by indirect matrix converter with predictive control algorithm. Journal of Electrical Engineering & Technology, 10 (1). pp. 227-242. ISSN 1975-0102, DOI https://doi.org/10.5370/Jeet.2015.10.1.227.

Uddin, M.N. and Daud, Wan Mohd Ashri Wan and Abbas, H.F. (2015) Co-production of hydrogen and carbon nanofibers from methane decomposition over zeolite Y supported Ni catalysts. Energy Conversion and Management, 90. pp. 218-229. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.10.060.

Ullah, K.R. and Akikur, R.K. and Ping, H.W. and Saidur, Rahman and Hajimolana, S.A. and Hussain, M.A. (2015) An experimental investigation on a single tubular SOFC for renewable energy based cogeneration system. Energy Conversion and Management, 94. pp. 139-149. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.01.055.

Ullah, M.H. and Ahsan, M.R. and Mahadi, W.N.L.W. and Latef, T.A. and Uddin, M.J. (2015) Isolation improvement of dual feed patch antenna by assimilating metasurface ground. Microwave and Optical Technology Letters, 57 (6). pp. 1406-1409. ISSN 0895-2477, DOI https://doi.org/10.1002/Mop.29101.

Ullah, M.H. and Wan Mahadi, W.N.L. and Latef, T.A. and Islam, M.T. and Uddin, M.J. and Ahsan, M.R. (2015) Dual band printed quasi-yagi antenna for RFID and WLAN applications. Microwave and Optical Technology Letters, 57 (11). pp. 2655-2657. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.29407.

Ullah, M.H. and Wan Mahadi, W.N.L. and Latef, T.A. and Islam, M.T. and Uddin, M.J. and Ahsan, M.R. (2015) Mutual coupling reduction of dual port antenna using zero index metasurface structure. International Journal of Applied Electromagnetics and Mechanics, 49 (3). pp. 387-394. ISSN 1383-5416, DOI https://doi.org/10.3233/JAE-150048.

Usman, Muhammad and Daud, Wan Mohd Ashri Wan and Abbas, Hazzim F. (2015) Dry reforming of methane: Influence of process parameters-A review. Renewable and Sustainable Energy Reviews, 45. pp. 710-744. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.02.026.

Usop, Z. and Sarhan, A.A.D. and Mardi, N.A. and Wahab, M.N.A. (2015) Measuring of positioning, circularity and static errors of a CNC vertical machining centre for validating the machining accuracy. Flow Measurement and Instrumentation, 61. pp. 39-50. ISSN 0263-2241, DOI https://doi.org/10.1016/j.measurement.2014.10.025.

Vanaki, S.M. and Mohammed, H.A. (2015) Numerical study of nanofluid forced convection flow in channels using different shaped transverse ribs. International Communications in Heat and Mass Transfer, 67. pp. 176-188. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2015.07.004.

Varahram, P. and Ali, B.M. and Mohammady, S. and Reza, A.W. (2015) Prototype of a Peak to Average Power Ratio Reduction Scheme in Orthogonal Frequency Division Multiplexing Systems. KSII Transactions on Internet and Information Systems, 9 (6). pp. 2201-2217. ISSN 1976-7277, DOI https://doi.org/10.3837/tiis.2015.06.013.

Venkatesh, - and Shamshuddin, S.Z.M. and Mubarak, N.M. (2015) Effective synthesis of quinoxalines over ceria based solid acids coated on honeycomb monoliths. Indian Journal of Chemistry - Section A Inorganic, Physical, Theoretical and Analytical Chemistry, 54A (7). pp. 843-850. ISSN 0376-4710,

Vidya, K.S. and Ng, E.Y.K. and Acharya, U.R. and Chou, S.M. and Tan, R.S. and Ghista, D.N. (2015) Computer-aided diagnosis of Myocardial Infarction using ultrasound images with DWT, GLCM and HOS methods: A comparative study. Computers in Biology and Medicine, 62. pp. 86-93. ISSN 0010-4825, DOI https://doi.org/10.1016/j.compbiomed.2015.03.033.

Vishwakarma, A. and Kumar, A. and Singh, G.K. (2015) A prototype filter design for cosine modulated transmultiplexer using weighted constrained least squares technique. AEU - International Journal of Electronics and Communications, 69 (6). pp. 915-922. ISSN 1434-8411, DOI https://doi.org/10.1016/j.aeue.2015.02.010.

Wakil, M.A. and Kalam, Md. Abul and Masjuki, Haji Hassan and Atabani, A.E. and Fattah, I.M.R. (2015) Influence of biodiesel blending on physicochemical properties and importance of mathematical model for predicting the properties of biodiesel blend. Energy Conversion and Management, 94. pp. 51-67. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.01.043.

Wakil, M.A. and Masjuki, Haji Hassan and Kalam, M.A. and Teoh, Y.H. and How, H.G. and Imtenan, S. (2015) Influence of engine operating variable on combustion to reduce exhaust emissions using various biodiesels blend. RSC Advances, 5 (122). pp. 100674-100681. ISSN 2046-2069, DOI https://doi.org/10.1039/c5ra16441a.

Wan Ghazali, Wan Nor Maawa and Mamat, Rizalman and Masjuki, Haji Hassan and Najafi, Gholamhassan (2015) Effects of biodiesel from different feedstocks on engine performance and emissions: A review. Renewable and Sustainable Energy Reviews, 51. pp. 585-602. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.06.031.

Wang, H.C. and He, Y.T. and Sun, H.Y. and Qiu, Z.R. and Xie, D. and Mei, T. and Tin, C.C. and Feng, Z.C. (2015) Temperature dependence of raman scattering in 4H-SiC films under different growth conditions. Chinese Physics Letters, 32 (4). p. 5. ISSN 0256-307X, DOI https://doi.org/10.1088/0256-307x/32/4/047801.

Wang, S.J. and Wang, Y. and Shu, X. and Tay, S.L. and Gao, W. and Shakoor, R.A. and Kahraman, R. (2015) Preparation and property of duplex Ni–B–TiO2/Ni nano-composite coatings. International Journal of Modern Physics B, 29 (10-11). p. 1540022. ISSN 0217-9792, DOI https://doi.org/10.1142/S0217979215400226.

Wee, W.H. and Li, Z. and Hu, J. and Kadri, Nahrizul Adib and Xu, F. and Liu, F. and Pingguan-Murphy, Belinda (2015) Fabrication of dielectrophoretic microfluidic chips using a facile screen-printing technique for microparticle trapping. Journal of Micromechanics and Microengineering, 25 (10). p. 105015. ISSN 0960-1317, DOI https://doi.org/10.1088/0960-1317/25/10/105015.

Win, M. and Bushroa, A.R. and Hassan, M.A. and Hilman, N.M. and Ide-Ektessabi, A. (2015) A Contrast Adjustment Thresholding Method for Surface Defect Detection Based on Mesoscopy. IEEE Transactions on Industrial Informatics, 11 (3). pp. 642-649. ISSN 1551-3203, DOI https://doi.org/10.1109/TII.2015.2417676.

Wong, S.D. and Ibrahim, S. and Zamzam, Z. and Kato, Y. and Sato, M. (2015) Effect of Impeller-To-Tank Geometry on Particles Distribution and Just-Suspension Speeds for a Range of Solids Loadings. Journal of Chemical Engineering of Japan, 48 (5). pp. 374-380. ISSN 0021-9592, DOI https://doi.org/10.1252/jcej.14we059.

Wong, S.Y. and Yap, K.S. and Yap, H.J. and Tan, S.C. (2015) A Truly Online Learning Algorithm using Hybrid Fuzzy ARTMAP and Online Extreme Learning Machine for Pattern Classification. Neural Processing Letters, 42 (3). pp. 585-602. ISSN 1370-4621, DOI https://doi.org/10.1007/s11063-014-9374-5.

Wong, S.Y. and Yap, K.S. and Yap, H.J. and Tan, S.C. and Chang, S.W. (2015) On Equivalence of FIS and ELM for Interpretable Rule-Based Knowledge Representation. IEEE Transactions on Neural Networks and Learning Systems, 26 (7). pp. 1417-1430. ISSN 2162-237X, DOI https://doi.org/10.1109/TNNLS.2014.2341655.

Wong, Wei Ru and Adikan, Faisal Rafiq Mahamd and Berini, P. (2015) Long-range surface plasmon Y-junctions for referenced biosensing. Optics Express, 23 (24). p. 31098. ISSN 1094-4087, DOI https://doi.org/10.1364/OE.23.031098.

Wong, Wei Ru and Krupin, O. and Adikan, Faisal Rafiq Mahamd and Berini, P. (2015) Optimization of Long-Range Surface Plasmon Waveguides for Attenuation-Based Biosensing. Journal of Lightwave Technology, 33 (15). pp. 3234-3242. ISSN 0733-8724, DOI https://doi.org/10.1109/JLT.2015.2431612.

Wren, A.W. and Hassanzadeh, P. and Placek, L.M. and Keenan, T.J. and Coughlan, A. and Boutelle, L.R. and Towler, M.R. (2015) Silver Nanoparticle Coated Bioactive Glasses - Composites with Dex/CMC Hydrogels: Characterization, Solubility, and In Vitro Biological Studies. Macromolecular Bioscience, 15 (8). pp. 1146-1158. ISSN 1616-5187, DOI https://doi.org/10.1002/mabi.201500109.

Xu, X.Y. and Akay, A. and Wei, H.L. and Wang, S.Q. and Pingguan-Murphy, Belinda and Erlandsson, B.E. and Li, X.J. and Lee, W. and Hu, J. and Wang, L. and Xu, F. (2015) Advances in smartphone-based point-of-care diagnostics. Proceedings of the IEEE, 103 (2). pp. 236-247. ISSN 0018-9219, DOI https://doi.org/10.1109/Jproc.2014.2378776.

Yahya, A.M. and Hussain, Mohd Azlan and Wahab, Ahmad Khairi Abdul (2015) Modeling, optimization, and control of microbial electrolysis cells in a fed-batch reactor for production of renewable biohydrogen gas. International Journal of Energy Research, 39 (4). pp. 557-572. ISSN 0363-907X, DOI https://doi.org/10.1002/Er.3273.

Yamamoto, M. and Nishikawa, G. and Afifi, A.M. and Lee, J.C. and Yamane, H. (2015) Effect of the take-up velocity on the higher-order structure of the melt-electrospun PLLA/PDLA blend fibers. Sen'i Gakkaishi, 71 (3). pp. 127-133. ISSN 1884-2259, DOI https://doi.org/10.2115/fiber.71.127.

Yao, C. and Tay, S.L. and Zhu, T. and Shang, H. and Gao, W. (2015) Effects of Mg content on microstructure and electrochemical properties of Zn–Al–Mg alloys. Journal of Alloys and Compounds, 645. pp. 131-136. ISSN 0925-8388, DOI https://doi.org/10.1016/j.jallcom.2015.05.010.

Yap, Soon Poh and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Khaw, Kuan Ren (2015) Torsional behaviour of steel fibre-reinforced oil palm shell concrete beams. Materials & Design, 87. pp. 854-862. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2015.08.078.

Yarmand, H. and Gharehkhani, S. and Ahmadi, G. and Shirazi, S.F.S. and Baradaran, S. and Montazer, E. and Zubir, M.N.M. and Alehashem, M.S. and Kazi, S.N. and Dahari, M. (2015) Graphene nanoplatelets–silver hybrid nanofluids for enhanced heat transfer. Energy Conversion and Management, 100. pp. 419-428. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.05.023.

Yasin, M. and Soelistiono, S. and Yhun Yhuwana, Y.G. and Khasanah, M. and Arof, Hamzah and Irawati, Ninik and Harun, Sulaiman Wadi (2015) Intensity based optical fiber sensors for calcium detection. Optoelectronics and Advanced Materials, Rapid Communications, 9 (9-10). pp. 1185-1189. ISSN 1842-6573,

Yatongchai, C. and Placek, L.M. and Curran, D.J. and Towler, M.R. and Wren, A.W. (2015) Investigating the addition of SiO2–CaO–ZnO–Na2O–TiO2 bioactive glass to hydroxyapatite: Characterization, mechanical properties and bioactivity. Journal of Biomaterials Applications, 30 (5). pp. 495-511. ISSN 0885-3282, DOI https://doi.org/10.1177/0885328215592866.

Yau, Y.H. and Ahmadzadehtalatapeh, M. (2015) Heat pipe heat exchanger and its potential to energy recovery in the tropics. Thermal Science, 19 (5). pp. 1685-1697. ISSN 0354-9836, DOI https://doi.org/10.2298/TSCI100818020Y.

Yau, Yat Huang and Ding, L.C. (2015) A comprehensive computational fluid dynamics simulation on the air distribution in an operating room at University of Malaya Medical Centre Malaysia. Indoor and Built Environment, 24 (3). pp. 355-369. ISSN 1420-326X, DOI https://doi.org/10.1177/1420326X13516349.

Yau, Yat Huang and Hasbi, S. (2015) Field analysis of indoor air quality in high rise and low rise green offices with radiant slab cooling systems in Malaysia. Indoor and Built Environment, 24 (2). pp. 174-184. ISSN 1420-326X, DOI https://doi.org/10.1177/1420326x13506130.

Yew, M.C. and Sulong, N.H.R. and Yew, M.K. and Amalina, M.A. and Johan, M.R. (2015) Eggshells: A novel bio-filler for intumescent flame-retardant coatings. Progress in Organic Coatings, 81. pp. 116-124. ISSN 0300-9440, DOI https://doi.org/10.1016/j.porgcoat.2015.01.003.

Yew, M.C. and Sulong, N.H.R. and Yew, M.K. and Amalina, M.A. and Johan, M.R. (2015) Influences of flame-retardant fillers on fire protection and mechanical properties of intumescent coatings. Progress in Organic Coatings, 78. pp. 59-66. ISSN 0300-9440, DOI https://doi.org/10.1016/j.porgcoat.2014.10.006.

Yew, M.K. and Mahmud, H.B. and Ang, B.C. and Yew, M.C. (2015) Effects of Low Volume Fraction of Polyvinyl Alcohol Fibers on the Mechanical Properties of Oil Palm Shell Lightweight Concrete. Advances in Materials Science and Engineering, 2015. pp. 1-11. ISSN 1687-8434, DOI https://doi.org/10.1155/2015/425236.

Yew, M.K. and Mahmud, H.B. and Ang, B.C. and Yew, M.C. (2015) Influence of different types of polypropylene fibre on the mechanical properties of high-strength oil palm shell lightweight concrete. Construction and Building Materials, 90. pp. 36-43. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.04.024.

Yip, M.W. and Barnes, S. and Sarhan, A.A.D. (2015) Deposition of a Silicon Carbide Reinforced Metal Matrix Composite (P25) Layer Using CO2Laser. Journal of Manufacturing Science and Engineering, 137 (3). 031010. ISSN 1087-1357, DOI https://doi.org/10.1115/1.4029831.

Yong, C.K. and Ching, Yern Chee and Chuah, Cheng Hock and Liou, N.S. (2015) Effect of Fiber Orientation on Mechanical Properties of Kenaf-Reinforced Polymer Composite. BioResources, 10 (2). pp. 2597-2608. ISSN 1930-2126, DOI https://doi.org/10.15376/biores.10.2.2597-2608.

Yousefi, A.T. and Bagheri, Samira and Kadri, Nahrizul Adib (2015) Integration of biosensors based on microfluidic: A review. Sensor Review, 35 (2). pp. 190-199. ISSN 0260-2288, DOI https://doi.org/10.1108/Sr-09-2014-697.

Yousefi, A.T. and Bagheri, Samira and Kadri, Nahrizul Adib and Elfghi, F.M. and Mahmood, Mohamad Rusop and Ikeda, Shoichiro (2015) Synthesis of well-crystalline lattice carbon nanotubes via neutralized cooling method. Materials and Manufacturing Processes, 30 (1). pp. 59-62. ISSN 1042-6914, DOI https://doi.org/10.1080/10426914.2014.961475.

Yousefi, A.T. and Bagheri, Samira and Kadri, Nahrizul Adib and Mahmood, M.R. and Ikeda, S. (2015) Constant glucose biosensor based on vertically aligned carbon nanotube composites. International Journal of Electrochemical Science, 10 (5). pp. 4183-4192. ISSN 1452-3981,

Yousefi, A.T. and Bagheri, Samira and Kadri, Nahrizul Adib and Mahmood, Mohamad Rusop and Ikeda, Shoichiro (2015) Controlling Vaporization Time as Effective Parameter on Purified Vertically Aligned Carbon Nanotubes Based on CVD Method. Fullerenes, Nanotubes and Carbon Nanostructures, 23 (12). pp. 1103-1107. ISSN 1536-383X, DOI https://doi.org/10.1080/1536383X.2015.1075514.

Yousefi, S. and Atrens, A.D. and Sauret, E. and Dahari, M. and Hooman, K. (2015) CFD Convective Flow Simulation of the Varying Properties of CO2-H2O Mixtures in Geothermal Systems. Scientific World Journal, 2015. pp. 1-8. ISSN 2356-6140, DOI https://doi.org/10.1155/2015/843068.

Yu, Y.P. and Paramesran, Raveendran and Lim, C.L. (2015) Dynamic heart rate measurements from video sequences. Biomedical Optics Express, 6 (7). pp. 2466-2480. ISSN 2156-7085, DOI https://doi.org/10.1364/BOE.6.002466.

Yu, Y.P. and Paramesran, Raveendran and Lim, C.L. and Kwan, B.H. (2015) Dynamic heart rate estimation using principal component analysis. Biomedical Optics Express, 6 (11). pp. 4610-4618. ISSN 2156-7085, DOI https://doi.org/10.1364/BOE.6.004610.

Yuen, C.W. and Karim, M.R. and Saifizul, A. (2015) Investigation on motorcyclist riding behaviour at curve entry in the down slope terrain. KSCE Journal of Civil Engineering, 19 (3). pp. 749-755. ISSN 1226-7988, DOI https://doi.org/10.1007/s12205-013-2607-8.

Yung, L.C. and Fei, C.C. and Mandeep, J.S. and Amin, N. and Lai, K.W. (2015) Bulk substrate porosity verification by applying Monte Carlo modeling and Castaing’s formula using energy-dispersive x-rays. The Journal of Electronic Imaging (JEI), 24 (6). 061105. ISSN 1017-9909, DOI https://doi.org/10.1117/1.JEI.24.6.061105.

Yunus Khan, T.M. and Atabani, A.E. and Badruddin, I.A. and Ankalgi, R.F. and Khan, T.K.M. and Badarudin, A. (2015) Ceiba pentandra, Nigella sativa and their blend as prospective feedstocks for biodiesel. Industrial Crops and Products, 65. pp. 367-373. ISSN 0926-6690, DOI https://doi.org/10.1016/j.indcrop.2014.11.013.

Yunus Khan, T.M. and Badruddin, I.A. and Badarudin, A. and Banapurmath, N.R. and Salman Ahmed, N.J. and Quadir, G.A. and Al-Rashed, A.A.A.A. and Khaleed, H.M.T. and Kamangar, S. (2015) Effects of engine variables and heat transfer on the performance of biodiesel fueled IC engines. Renewable and Sustainable Energy Reviews, 44. pp. 682-691. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2015.01.025.

Yusof, H.H.M. and Soin, N. and Murti, W.B. (2015) HCI degradation effect on VDMOS transistor with geometric and process variations. International Journal of Applied Engineering Research, 10 (19). pp. 39880-39884. ISSN 0973-4562,

Yusof, N.F. and Ibrahim, Fatimah and Rahman, H.A. and Adwan, S. and Harun, Sulaiman Wadi (2015) Tapered plastic optical fiber sensor for dengue non-structural protein 1 (Ns1) detection. Optoelectronics and Advanced Materials, Rapid Communications, 9 (1-2). pp. 75-78. ISSN 1842-6573,

Zahid, R. and Masjuki, Haji Hassan and Varman, Mahendra and Mufti, R.A. and Kalam, M.A. and Gulzar, M. (2015) Effect of Lubricant Formulations on the Tribological Performance of Self-Mated Doped DLC Contacts: a review. Tribology Letters, 58 (2). p. 32. ISSN 1023-8883, DOI https://doi.org/10.1007/s11249-015-0506-5.

Zanil, M.F. and Hussain, Mohd Azlan (2015) Multivariable Adaptive Lyapunov Fuzzy Controller for pH Neutralisation Process. Computer Aided Chemical Engineering, 37. pp. 1643-1648. ISSN 1570-7946, DOI https://doi.org/10.1016/B978-0-444-63577-8.50119-4.

Zare-Zardini, H. and Amiri, A. and Shanbedi, M. and Taheri-Kafrani, A. and Kazi, S.N. and Chew, B.T. and Razmjou, A. (2015) In vitroandin vivostudy of hazardous effects of Ag nanoparticles and Arginine-treated multi walled carbon nanotubes on blood cells: Application in hemodialysis membranes. Journal of Biomedical Materials Research Part A, 103 (9). pp. 2959-2965. ISSN 1549-3296, DOI https://doi.org/10.1002/jbm.a.35425.

Zarei, A. and Tiu, Zian Cheak and Ahmad, F. and Ahmad, Harith and Harun, Sulaiman Wadi (2015) Q-switched brillouin fibre laser with multi-wall carbon nanotube saturable absorber. IET Optoelectronics, 9 (2). pp. 96-100. ISSN 1751-8768, DOI https://doi.org/10.1049/iet-opt.2014.0041.

Zavareh, M.A. and Sarhan, A.A.D. and Bushroa, Abdul Razak and Basirun, Wan Jefrey (2015) The tribological and electrochemical behavior of HVOF-sprayed Cr3C2–NiCr ceramic coating on carbon steel. Ceramics International, 41 (4). pp. 5387-5396. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2014.12.102.

Zeimaran, E. and Pourshahrestani, S. and Djordjevic, I. and Pingguan-Murphy, Belinda and Kadri, Nahrizul Adib and Towler, Mark Robert (2015) Bioactive glass reinforced elastomer composites for skeletal regeneration: A review. Materials Science and Engineering: C, 53. pp. 175-188. ISSN 0928-4931, DOI https://doi.org/10.1016/j.msec.2015.04.035.

Zeimaran, Ehsan and Pourshahrestani, Sara and Pingguan-Murphy, Belinda and Kadri, Nahrizul Adib and Rothan, Hussin A. and Yusof, Rohana and Towler, Mark Robert and Djordjevic, Ivan (2015) Fabrication and characterization of poly(octanediol citrate)/gallium-containing bioglass microcomposite scaffolds. Journal of Materials Science, 50 (5). pp. 2189-2201. ISSN 0022-2461, DOI https://doi.org/10.1007/s10853-014-8782-2.

Zhang, X. and Liu, M. and Li, Y. and Dong, Y. and Pingguan-Murphy, Belinda and Lu, T.J. and Xu, F. (2015) Engineering cell microenvironment using novel functional hydrogels. European Polymer Journal, 72. pp. 590-601. ISSN 0014-3057, DOI https://doi.org/10.1016/j.eurpolymj.2015.03.019.

Zhong, X. and Mohammadi, A. and Premkumar, A.B. and Asif, A. (2015) A distributed particle filtering approach for multiple acoustic source tracking using an acoustic vector sensor network. Signal Processing, 108. pp. 589-603. ISSN 0165-1684, DOI https://doi.org/10.1016/j.sigpro.2014.09.031.

Zolkarnain, N. and Yusoff, S. and Subramaniam, V. and Maurad, Z.A. and Abu Bakar, Z. and Ghazali, R. and Abu Hassan, H. (2015) Evaluation of environmental impacts and GHG of palm polyol production using life cycle assessment approach. Journal of Oil Palm Research, 27 (2). pp. 144-155. ISSN 1511-2780,

Zubir, M.N.M. and Badarudin, A. and Kazi, S.N. and Huang, N.M. and Misran, M. and Sadeghinezhad, E. and Mehrali, M. and Syuhada, N.I. and Gharehkhani, S. (2015) Experimental investigation on the use of reduced graphene oxide and its hybrid complexes in improving closed conduit turbulent forced convective heat transfer. Experimental Thermal and Fluid Science, 66. pp. 290-303. ISSN 0894-1777, DOI https://doi.org/10.1016/j.expthermflusci.2015.03.022.

Zubir, M.N.M. and Badarudin, A. and Kazi, S.N. and Misran, M. and Amiri, A. and Sadri, R. and Khalid, S. (2015) Experimental investigation on the use of highly charged nanoparticles to improve the stability of weakly charged colloidal system. Journal of Colloid and Interface Science, 454. pp. 245-255. ISSN 0021-9797, DOI https://doi.org/10.1016/j.jcis.2015.05.019.

Conference or Workshop Item

Abdullah, Norbani and Elsheikh, Mohamed Hamid and Ibrahim, Nik Muhd Jazli Nik and Said, Suhana Mohd and Sabri, Mohd Faizul Mohd and Masjuki, Haji Hassan (2015) Thermoelcctrical properties and surface morphology of iron(ii) complexes with conjugated mulltidonor ligands. In: Manchester Conference Centre, Manchester, United Kingdom, 13-16 September 2015, Manchester, United Kingdom.

Aishah, A.B. (2015) Reinstating the soul in engineering laboratory work: Direct observation assessment method. In: International Conference on Engineering Education and Research 2015, 19-21 December 2015, Madinah, Kingdom of Saudi Arabia.

Azwar, M.Y. and Hussain, Mohd Azlan and Wahab, Ahmad Khairi Abdul and Zanil, M.F. (2015) A comparative study between Neural Networks (NN)-based and adaptive-PID controllers for the optimal bio-hydrogen gas production in microbial electrolysis cell reactor. In: 12th International Symposium on Process Systems Engineering and 25th European Symposium on Computer Aided Process Engineering, 31 May – 4 June 2015, Copenhagen, Denmark.

Chew, B.T. and Kazi, S.N. and Amiri, A. (2015) Adaptive thermal comfort model for air-conditioned lecture halls in Malaysia. In: International Conference on Air Pollution and Control, 23-24 Feb 2015, Paris, France.

Farahmand, E. and Ibrahim, F. and Hosseini, S. and Djordjevic, I. and Koole, L.H. (2015) Development of a new polymeric material with controlled surface micro-morphology aimed for biosensors applications. In: International Scholarly and Scientific Research & Innovation, 26-27 Jan 2015, Jeddah, Saudi Arabia.

Md Nor, Norazwan and Hussain, Mohd Azlan and Che Hassan, Che Rosmani (2015) Process monitoring and fault detection in nonlinear chemical process based on multi-scale Kernel Fisher discriminant analysis. In: 12th International Symposium on Process Systems Engineering and 25th European Symposium on Computer Aided Process Engineering, 31 May – 4 June 2015, Copenhagen, Denmark.

Mohd Fuad, Mohd Nazri and Hussain, Mohd Azlan (2015) Systematic design of chemical reactors with multiple stages via multi-objective optimization approach. In: 12th International Symposium on Process Systems Engineering and 25th European Symposium on Computer Aided Process Engineering, 31 May–4 June 2015, Copenhagen, Denmark.

Mohd Yusof, Noraini and Ong, Hwai Chyuan and Jan, Badrul Mohamed and Chong, Wen Tong and Masjuki, Haji Hassan (2015) Investigation of extraction and transesterification of algae by immobilized lipase as biofuel. In: 5th International Conference on Algal Biomass, Biofuels & Bioproducts, 7-10 June 2015, San Diego, USA. (Submitted)

Tan, Y.M. and Tan, C.Y. and Singh, R. and Teh, Y.C. and Yap, B.K. (2015) The effect of heat treatment time on the formation of forsterite (Mg2SiO4). In: 7th International Conference On Bioinformatics And Biomedical Technology (ICBBT 2015), 23-24 May 2015, Singapore.

Yusoff, S. and Syafiq Rosli, A. (2015) The implication of feed-in tariff funding structure and the sustainability of renewable energy in Malaysia. In: 9th International Conference on Researches in Engineering Technology and Sciences (ICRETS), 17-18 September 2015, London Imperial College, United Kingdom.

Yusoff, S. and Syafiq Rosli, A. (2015) The implication of feed-in tariff funding structureand the sustainability of renewable energy in Malaysia. In: 9th International Conference on Researches in Engineering Technology and Sciences (ICRETS), 17-18 September 2015, London Imperial College, United Kingdom.

Zanil, M.F. and Hussain, Mohd Azlan (2015) Multivariable adaptive lyapunov fuzzy controller for pH neutralisation process. In: 12th International Symposium on Process Systems Engineering and 25th European Symposium on Computer Aided Process Engineering, 31 May – 4 June 2015, Copenhagen, Denmark.

Thesis

Ezazi, M.A. (2015) The employment of advanced fiber laser technology to weld dissimilar materials: Stainless steel and aluminum alloy using pre-placed powder-based activating flux and filler. Masters thesis, University of Malaya.

This list was generated on Sun Aug 7 22:52:11 2022 +08.