Items where Division is "Faculty of Engineering" and Year is 2012

Article

Abd Razak, N.A. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar (2012) Kinematic comparison of the wrist movements that are possible with a biomechatronics wrist prosthesis and a body-powered prosthesis: a preliminary study. Disability and Rehabilitation: Assistive Technology (00). pp. 1-6. ISSN 1748-3107, DOI https://doi.org/10.3109/17483107.2012.704654.

Abdolrasol, M.G.M. and Mekhilef, Saad (2012) Development of hybrid anti-islanding based on distributed generation interconnection. International Review on Modelling and Simulations, 5 (1). pp. 60-68. ISSN 1974-9821,

Abdul Hakim, S.R. (2012) Laminar mixed convection in inclined triangular enclosures filled with water based cu nanofluid. Industrial and Engineering Chemistry Research, 51 (10). pp. 4090-4100. ISSN 0888-5885, DOI https://doi.org/10.1021/ie201235p.

Abdul Wahab, M.J. and Jumaat, Mohd Zamin and Mohamad Khaidzir, M.O. (2012) Statistical technique for grouping tropical timbers into similar strength groups. Modern Applied Science, 6 (3). pp. 73-80. ISSN 1913-1852, DOI https://doi.org/10.5539/mas.v6n3p73.

Abdullah, M.A. and Yatim, A.H.M. and Tan, C.W.A. and Saidur, Rahman (2012) A review of maximum power point tracking algorithms for wind energy systems. Renewable and Sustainable Energy Reviews, 16 (5). pp. 3220-3227. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.02.016.

Abioye, O.P. and Agamuthu, P. and Abdul Raman, Abdul Aziz (2012) Phytotreatment of soil contaminated with used lubricating oil using Hibiscus cannabinus. Biodegradation, 23 (2). pp. 277-286. ISSN 1572-9729 (Electronic) 0923-9820 (Linking),

Abioye, O.P. and Agamuthu, Pariatamby and Abdul Raman, Abdul Aziz (2012) Biodegradation of used motor oil in soil using organic waste amendments. Biotechnology Research International, 2012. p. 587041. ISSN 2090-3138,

Aboodarda, S.J. and Yosuf, A. and Abu Osman, Noor Azuan and Thompson, M.W. and Mokhtar, A.H. (2012) The contribution of elasticresistance during the eccentric phase of a countermovement jump enhances performance. International Journal of Sports Physiology and Performance. ISSN 1555-0265, DOI 22904117.

Adikan, Faisal Rafiq Mahamd and Abu Hassan, M.R. and Abu Bakar, M.H. and Dambul, K.D. (2012) Optical-based sensors for monitoring corrosion of reinforcement rebar via an etched cladding Bragg grating. Sensors, 12 (11). pp. 15820-15826. ISSN 1424-8220, DOI https://doi.org/10.3390/s121115820.

Adikan, Faisal Rafiq Mahamd and Al-Fakih, E. and Abu Osman, Noor Azuan (2012) The use of fiber Bragg grating sensors in biomechanics and rehabilitation applications: the state-of-the-art and ongoing research topics. Sensors, 12 (10). pp. 12890-12926. ISSN 1424-8220, DOI https://doi.org/10.3390/s121012890.

Adikan, Faisal Rafiq Mahamd and Hisham, H.K. and Mahdiraji, G.A. and Abas, A.F. and Mahdi, M.A. (2012) Characterization of transient response in fiber grating Fabry–Perot lasers. IEEE Photonics Journal, 4 (6). pp. 2353-2371. ISSN 1943-0655, DOI https://doi.org/10.1109/JPHOT.2012.2231957.

Adikan, Faisal Rafiq Mahamd and Sandoghchi, S.R. and Yi, C.W. and Simpson, R.E. and Mahdi, M.A. and Webb, A.S. and Gates, J.C. and Holmes, C. (2012) Direct UV written optical waveguides in flexible glass flat fiber chips. IEEE Journal of Selected Topics in Quantum Electronics, 18 (5). pp. 1534-1539. ISSN 1077-260X,

Adwan, Somaya and Arof, Hamzah (2012) On improving dynamic time warping for pattern matching. Measurement, 45. pp. 1609-1620. ISSN 0263-2241,

Adzila, S. and Sopyan, I. and Abd Shukor, Mohd Hamdi (2012) Mechanochemical synthesis of hydroxyapatite nanopowder: effects of rotation speed and milling time on powder properties. Applied Mechanics and Materials, 110. pp. 3639-3644. ISSN 3037852623,

Afshar, O. and Saidur, Rahman and Hasanuzzaman, M. and Jameel, M. (2012) A review of thermodynamics and heat transfer in solar refrigeration system. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5639-5648. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.05.016.

Ahamed, Jamal Uddin and Madlool, N.A. and Saidur, Rahman and Shahinuddin, M.I. and Kamyar, A. and Masjuki, Haji Hassan (2012) Assessment of energy and exergy efficiencies of a grate clinker cooling system through the optimization of its operational parameters. Energy, 46 (1). pp. 664-674. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2012.06.074.

Ahamed, Jamal Uddin and Saidur, Rahman and Masjuki, Haji Hassan and Sattar, M.A. (2012) Energy and thermodynamic performance of LPG as an alternative refrigerant to R-134a in a domestic refrigerator. Energy Education Science and Technology Part A: Energy Science and Research, 29 (1). pp. 597-610. ISSN 1308-772X,

Ahamed, Jamal Uddin and Saidur, Rahman and Masjuki, Haji Hassan and Sattar, M.A. (2012) An analysis of energy, exergy, and sustainable development of a vapor compression refrigeration system using hydrocarbon. International Journal of Green Energy, 9 (7). pp. 702-717. ISSN 1543-5075, DOI https://doi.org/10.1080/15435075.2011.621491.

Ahmad, B.A. and Al-Alimi, A.W. and Abas, Ahmad Fauzi and Harun, Sulaiman Wadi and Mahdi, Mohd Adzir (2012) Stable double spacing multiwavelength Brillouin-Erbium doped fiber laser based on highly nonlinear fiber. Laser Physics, 22 (5). pp. 977-981. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X12050027.

Ahmad, B.A. and Al-Alimi, A.W. and Abas, Ahmad Fauzi and Mokhtar, Makhfudzah and Harun, Sulaiman Wadi and Mahdi, Mohd Adzir (2012) Compact Brillouin Fiber Laser Based on Highly Nonlinear Fiber With 51 Double Spacing Channels. IEEE Photonics Journal, 4 (4). pp. 1087-1094. ISSN 1943-0655, DOI https://doi.org/10.1109/JPHOT.2012.2204970.

Ahmad, B.A. and Al-Alimi, A.W. and Abas, Ahmad Fauzi and Mokhtar, Makhfudzah and Harun, Sulaiman Wadi and Mahdi, Mohd Adzir (2012) Double spacing multi-wavelength L-band Brillouin erbium fiber laser with Raman pump. Journal of Modern Optics, 59 (19). pp. 1690-1694. ISSN 0950-0340, DOI https://doi.org/10.1080/09500340.2012.739712.

Ahmad, Harith and Aryanfar, Iman and Lim, Kok Sing and Chong, Wu Yi and Harun, Sulaiman Wadi (2012) Thermal response of chalcogenide microsphere resonators. Quantum Electronics, 42 (5). pp. 462-464. ISSN 1063-7818, DOI https://doi.org/10.1070/QE2012v042n05ABEH014813.

Ahmad, Harith and Awang, Noor Azura and Latif, Amirah Abdul and Harun, Sulaiman Wadi (2012) Generation of high power pulse of Bi-EDF and octave spanning supercontinuum using highly nonlinear fiber. Microwave and Optical Technology Letters, 54 (4). pp. 983-987. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.26744.

Ahmad, Harith and Awang, Noor Azura and Paul, Mukul Chandra and Pal, Mrinmay and Latif, Amirah Abdul and Harun, Sulaiman Wadi (2012) All fiber passively mode locked zirconium-based erbium-doped fiber laser. Optics & Laser Technology, 44 (3). pp. 534-537. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2011.08.022.

Ahmad, Harith and Latif, Amirah Abdul and Zulkifli, Mohd Zamani and Awang, Noor Azura and Harun, Sulaiman Wadi (2012) High power dual-wavelength tunable fiber laser in linear and ring cavity configurations. Chinese Optics Letters, 10 (1). 010603-10606. ISSN 1671-7694, DOI https://doi.org/10.3788/COL201210.010603.

Ahmad, Harith and Latif, Amirah Abdul and Zulkifli, Mohd Zamani and Awang, Noor Azura and Harun, Sulaiman Wadi (2012) Temperature Sensing Using Frequency Beating Technique From Single-Longitudinal Mode Fiber Laser. IEEE Sensors Journal, 12 (7). pp. 2496-2500. ISSN 1530-437X, DOI https://doi.org/10.1109/JSEN.2012.2191401.

Ahmad, Harith and Muhammad, Farah Diana and Zulkifli, Mohd Zamani and Latif, Amirah Abdul and Harun, Sulaiman Wadi (2012) Tunable Radio Frequency Generation Using a Graphene-Based Single Longitudinal Mode Fiber Laser. Journal of Lightwave Technology, 30 (13). pp. 2097-2102. ISSN 0733-8724, DOI https://doi.org/10.1109/JLT.2012.2192099.

Ahmad, Harith and Paul, Mukul Chandra and Awang, Noor Azura and Harun, Sulaiman Wadi and Pal, Mrinmay and Thambiratnam, Kavintheran (2012) Four-Wave-Mixing in Zirconia-Yttria-Aluminum Erbium Codoped Silica Fiber. Journal of the European Optical Society: Rapid Publications, 7. p. 12011. ISSN 1990-2573, DOI https://doi.org/10.2971/jeos.2012.12011.

Ahmad, Harith and Thambiratnam, Kavintheran and Awang, Noor Azura and Jemangin, M.H. and Harun, Sulaiman Wadi (2012) Stable zirconia-erbium doped multiwavelength fiber laser by precise control of polarization states. Laser Physics, 22 (5). pp. 982-985. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X12050015.

Ahmad, Harith and Yasin, Moh and Thambiratnam, Kavintheran and Harun, Sulaiman Wadi (2012) Fiber optic displacement sensor for micro‐thickness measurement. Sensor Review, 32 (3). pp. 230-235. ISSN 0260-2288, DOI https://doi.org/10.1108/02602281211233223.

Ahmad, Harith and Zulkifli, Mohd Zamani and Hassan, Nor Ahya and Harun, Sulaiman Wadi (2012) Enhancement of Brillouin Stokes generation in the S-band region using a combination S-band Depressed Cladding Erbium Doped Fiber and Semiconductor Optical Amplifier. Laser Physics, 22 (3). pp. 598-604. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X12030012.

Ahmad, Harith and Zulkifli, Mohd Zamani and Hassan, Nor Ahya and Harun, Sulaiman Wadi (2012) S-band multiwavelength ring Brillouin/Raman fiber laser with 20 GHz channel spacing. Applied Optics, 51 (11). pp. 1811-1815. ISSN 1559-128X, DOI https://doi.org/10.1364/AO.51.001811.

Ahmad, Harith and Zulkifli, Mohd Zamani and Latif, Amirah Abdul and Jemangin, M.H. and Chong, Su Sin and Harun, Sulaiman Wadi (2012) Tunable single longitudinal mode S-band fiber laser using a 3 m length of erbium-doped fiber. Journal of Modern Optics, 59 (3). pp. 268-273. ISSN 0950-0340, DOI https://doi.org/10.1080/09500340.2011.626900.

Ahmad, J. and Rahman, M.M. and Zuhairi, M.H.A. and Ramesh, S. and Hassan, M.A. and Purbolaksono, J. (2012) High operating steam pressure and localized overheating of a primary superheater tube. Engineering Failure Analysis, 26. pp. 344-348. ISSN 1350-6307,

Ahmad, S. and M.A., H. and Sabri, M.F. and Navid, M. (2012) Comparative simulation study of gas-phase propylene polymerization in fluidized bed reactors using aspen polymers and two phase models. Chemical Industry and Chemical Engineering Quarterly (00). p. 38. ISSN 1451-9372, DOI https://doi.org/10.2298/CICEQ111214038S.

Ahmadinia, E. and Zargar, M. and Karim, Mohamed Rehan and Abdelaziz, M. and Ahmadinia, E. (2012) Performance evaluation of utilization of waste Polyethylene Terephthalate (PET) in stone mastic asphalt. Construction and Building Materials, 36. pp. 984-989. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.06.015.

Ahmady, A. and Hashim, M.A. and Aroua, M.K. (2012) Kinetics of carbon dioxide absorption into aqueous MDEA+bmimBF 4 solutions from 303 to 333K. Chemical Engineering Journal, 200-20. pp. 317-328. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2012.06.037.

Ahmed, R.A. and Mekhilef, Saad and Ping, H.W. (2012) Asymmetrical multilevel inverter topology with reduced number of switches. International Review of Electrical Engineering, 7 (4). pp. 4761-4767. ISSN 1827-6660,

Al-Fakih, E. and Abu Osman, Noor Azuan and Adikan, Faisal Rafiq Mahamd (2012) The sse of fiber bragg grating sensors in biomechanics and rehabilitation applications: the state-of-the-art and ongoing research topics. Sensors, 12 (10). pp. 12890-12926. ISSN 1424-8220, DOI https://doi.org/10.3390/s121012890.

Alam, M.A. and Jumaat, Mohd Zamin (2012) Experimental investigations on U- and L-shaped end anchored CFRP laminate strengthened reinforced concrete beams. Arabian Journal for Science and Engineering, 37 (4). pp. 905-919. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-012-0213-6.

Ale Ebrahim, N. (2012) Virtual R&D teams definition. Nader Ale Ebrahim's White Papers, 1 (1). pp. 1-2.

Ale Ebrahim, N. and Ahmed, S. and Abdul Rashid, S.H. and Taha, Z. (2012) Effective virtual teams for new product development. Scientific Research and Essays, 7 (21). pp. 1971-1985. ISSN 1992-2248,

Ale Ebrahim, N. and Ahmed, S. and Abdul Rashid, S.H. and Taha, Z. (2012) Technology use in the virtual R&D teams. American Journal of Engineering and Applied Sciences, 5 (1). pp. 9-14. ISSN 1793-8244 , DOI https://doi.org/10.3844/ajeassp.2012.9.14.

Ale Ebrahim, N. and Ahmed, S. and Abdul Rashid, S.H. and Taha, Z. and Mohammadjafari, M. (2012) Process construct in the virtual R&D teams. Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2012. pp. 1822-1828.

Ali, Brahim Si and Ali, B.H. and Yusoff, Rozita and Aroua, M.K. (2012) Carbon steel corrosion behaviors in carbonated aqueous mixtures of monoethanolamine and 1-n-butyl-3-methylimidazolium tetrafluoroborate. International Journal of Electrochemical Science, 7 (5). pp. 3835-3853. ISSN 1452-3981,

Ali, M.B. and Saidur, Rahman and Hasanuzzaman, M. and Ward, T.A. (2012) Energy and emission analysis in the malaysian food industries. Environmental Progress and Sustainable Energy, 27 (4). n/a-n/a. ISSN 1944-7450, DOI https://doi.org/10.1002/ep.11682.

Ali, Norfizah Md and Harun, Sulaiman Wadi and Dimyati, Kaharudin and Ahmad, Harith (2012) Tuneable high output power Brillouin fiber laser. Journal of Optoelectronics and Advanced Materials, 14 (1-2). pp. 13-17. ISSN 1454-4164,

Ali, S. and Abu Osman, Noor Azuan and Mortaza, N. and Eshraghi, A. and Gholizadeh, H. and Wan Abas, Wan Abu Bakar (2012) Clinical investigation of the interface pressure in the trans-tibial socket with Dermo and Seal-In X5 liner during walking and their effect on patient satisfaction. Clinical Biomechanics, 27 (9). pp. 943-948. ISSN 0268-0033, DOI https://doi.org/10.1016/j.clinbiomech.2012.06.004.

Ali, S. and Abu Osman, Noor Azuan and Naqshbandi, M.M. and Eshraghi, A. and Kamyab, M. and Gholizadeh, H. (2012) Qualitative study of prosthetic suspension systems on individuals with transtibial amputations aatisfaction and perceived problems with their prosthetic devices. Archives of Physical Medicine and Rehabilitation, 93 (11). pp. 1919-1923. ISSN 0003-9993, DOI https://doi.org/10.1016/j.apmr.2012.04.024.

Alwafi, Yusef Abdul and Bidin, Noriah and Gustiono, Dwi and Harun, Sulaiman Wadi (2012) Alloying aluminum with Fe using laser induced plasma technique. Laser Physics, 22 (8). pp. 1364-1367. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X12080026.

Aman, M.M. and Jasmon, G.B. and Bakar, A.H.A. and Mokhlis, Hazlie (2012) Optimum capacitor placement and sizing for distribution system based on an improved voltage stability index. International Review of Electrical Engineering, 7 (3). pp. 4622-4630. ISSN 1827-6660,

Aman, M.M. and Jasmon, G.B. and Mokhlis, Hazlie and Bakar, A.H.A. (2012) Analysis of the performance of domestic lighting lamps. Energy Policy, 52. pp. 482-500. ISSN 0301-4215, DOI https://doi.org/10.1016/j.enpol.2012.09.068.

Aman, M.M. and Jasmon, G.B. and Mokhlis, Hazlie and Bakar, A.H.A. (2012) Optimal placement and sizing of a DG based on a new power stability index and line losses. International Journal of Electrical Power & Energy Systems, 43 (1). pp. 1296-1304. ISSN 0142-0615, DOI https://doi.org/10.1016/j.ijepes.2012.05.053.

Ambran, S. and Holmes, C. and Gates, J.C. and Webb, A.S. and Carpenter, L.G. and Adikan, Faisal Rafiq Mahamd and Smith, P.G.R. and Sahu, J.K. (2012) Fabrication of a multimode interference device in a low-loss flat-fiber platform using physical micromachining technique. Journal of Lightwave Technology, 30 (17). pp. 2870-2875. ISSN 0733-8724,

Amindoust, A. and Ahmed, S. and Saghafinia, A. (2012) A taxonomy and review on supplier selection methods under uncertainty. Science, 7 (1). ISSN 1095-9203,

Amindoust, A. and Ahmed, S. and Saghafinia, A. and Bahreininejad, A. (2012) Sustainable supplier selection: a ranking model based on fuzzy inference system. Applied Soft Computing, 12 (6). pp. 1668-1677. ISSN 1568-4946,

Amiriyan, M. and Chew, W.J. and Ramesh, S. and Tolouei, R. and Hassan, M.A. and Hossain, A. and Sopyan, I. and Meenaloshini, S. (2012) Mechanical and electrical properties of Y-TZP/ZrB2 composite. Advanced Materials Research, 576. pp. 228-231.

Arafat, M.M. and Dinan, B. and Akbar, S.A. and Haseeb, A.S. Md. Abdul (2012) Gas sensors based on one dimensional nanostructured metal-oxides: a review. Sensors, 12. pp. 7207-7258. ISSN 1424-8220, DOI https://doi.org/10.3390/s120607207.

Armstrong, D.E.J. and Haseeb, A.S. Md. Abdul and Roberts, S.G. and Wilkinson, A.J. and Bade, K. (2012) Nanoindentation and micro-mechanical fracture toughness of electrodeposited nanocrystalline Ni-W alloy films. Thin Solid Films, 520 (13). pp. 4369-4372. ISSN 0040-6090,

Askari, E. and Mehrali, Mehdi and Metselaar, I.H.S.C. and Kadri, Nahrizul Adib and Rahman, Md Moshiur (2012) Fabrication and mechanical properties of Al2O3/SiC/ZrO2 functionally graded material by electrophoretic deposition. Journal of the Mechanical Behavior of Biomedical Materials, 12. pp. 144-150. ISSN 1751-6161, DOI https://doi.org/10.1016/j.jmbbm.2012.02.029.

Asli, H. and Ahmadinia, E. and Zargar, M. and Karim, Mohamed Rehan (2012) Investigation on physical properties of waste cooking oil - Rejuvenated bitumen binder. Construction and Building Materials, 37. pp. 398-405. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.07.042.

Atabani, A.E. and Saidur, Rahman and Silitonga, A.S. and Mahlia, T.M.I. (2012) Energy economical and environmental analysis of industrial boilers using VSD. Applied Mechanics and Materials, 110. pp. 3223-3233. ISSN 3037852623, DOI https://doi.org/10.4028/www.scientific.net/AMM.110-116.3223.

Atadashi, I.M. and Aroua, M.K. and Abdul Raman, Abdul Aziz and Sulaiman, N.M.N. (2012) High quality biodiesel obtained through membrane technology. Journal of Membrane Science, 421-42. pp. 154-164. ISSN 03767388 (ISSN),

Atadashi, I.M. and Aroua, Mohamed Kheireddine and Abdul Raman, Abdul Aziz and Sulaiman, N.M.N. (2012) Production of biodiesel using high free fatty acid feedstocks. Renewable and Sustainable Energy Reviews, 16 (5). pp. 3275-3285. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.02.063.

Atadashi, I.M. and Aroua, Mohamed Kheireddine and Abdul Raman, Abdul Aziz and Sulaiman, N.M.N. (2012) The effects of water on biodiesel production and refining technologies: A review. Renewable and Sustainable Energy Reviews, 16 (5). pp. 3456-3470. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.03.004.

Awalin, L.J. and Mokhlis, Hazlie and Bakar, A.H.A. (2012) Recent developments in fault location methods for distribution networks. Przeglad Elektrotechniczny, 88 (12 A). pp. 206-212. ISSN 0033-2097,

Aziz, A.A. and Cheng, C.K. and Ibrahim, S. and Matheswaran, M. and Saravanan, P. (2012) Visible light improved, photocatalytic activity of magnetically separable titania nanocomposite. Chemical Engineering Journal, 183. pp. 349-356. ISSN 13858947, DOI https://doi.org/10.1016/j.cej.2012.01.006.

Aziz, A.A. and Yong, K.S. and Ibrahim, S. and Pichiah, S. (2012) Enhanced magnetic separation and photocatalytic activity of nitrogen doped titania photocatalyst supported on strontium ferrite. Journal of Hazardous Materials, 199-20. pp. 143-150. ISSN 0304-3894 , DOI https://doi.org/10.1016/j.jhazmat.2011.10.069.

Aziz, Noorhaliza and Yusoff, Rozita and Aroua, Mohamed Kheireddine (2012) Absorption of CO2 in aqueous mixtures of N-methyldiethanolamine and guanidinium tris(pentafluoroethyl)trifluorophosphate ionic liquid at high-pressure. Fluid Phase Equilibria, 322-32. pp. 120-125. ISSN 0378-3812, DOI https://doi.org/10.1016/j.fluid.2012.03.007.

Babaei, A. and Faraji, G. and Mashhadi, M.M. and Abd Shukor, Mohd Hamdi (2012) Repetitive forging (RF) using inclined punches as a new bulk severe plastic deformation method. Materials Science and Engineering: A, 558. pp. 150-157. ISSN 0921-5093,

Baghaee Moghaddam, T. and Karim, Mohamed Rehan and Syammaun, T. (2012) Dynamic properties of stone mastic asphalt mixtures containing waste plastic bottles. Construction and Building Materials, 34. pp. 236-242. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.02.054.

Bahari, H. and Abd Aziz, S.H. and Kamari, H.M. and Yunus, W.M.M. and Adikan, Faisal Rafiq Mahamd (2012) The effect of bismuth on the structure and mechanical properties of GeO2-PbO-Bi2O3 ternary bulk glass system. Journal of the Ceramic Society of Japan, 120 (1403). pp. 280-285. ISSN 1882-0743,

Bahari, H.R. and Sidek, H.A.A. and Adikan, Faisal Rafiq Mahamd and Yunus, W.M.M. and Halimah, M.K. (2012) Infrared Study of Er3+/Yb3+ Co-Doped GeO2-PbO-Bi2O3 Glass. International Journal of Molecular Sciences, 13 (7). pp. 8609-8614. ISSN 1661-6596,

Bakar, A.H.A. and Mokhlis, Hazlie and Illias, N.A. and Chong, P.L. (2012) The study of directional overcurrent relay and directional earth-fault protection application for 33 kV underground cable system in Malaysia. International Journal of Electrical Power & Energy Systems, 40 (1). pp. 113-119. ISSN 0142-0615, DOI https://doi.org/10.1016/j.ijepes.2012.02.011.

Bani Hashim, A.Y. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Abdul Latif, L. (2012) Approximating the relationship among the degree of the reaction forces and the nodes on footprint during a stance phase. Applied Mathematical Modelling. ISSN 0307-904X, DOI https://doi.org/10.1016/j.apm.2011.11.089.

Baroutian, S. and Aroua, M.K. and Abdul Raman, Abdul Aziz and Sulaiman, N.M.N. (2012) TiO 2/Al 2O 3 membrane reactor equipped with a methanol recovery unit to produce palm oil biodiesel. International Journal of Energy Research, 36 (1). pp. 120-129. ISSN 0363-907X,

Basir, S.M. and Mahdiraji, G.A. and Malekmohammadi, A. and Ibrahim, N.H. and Abas, A.F. and Abdullah, M.K. and Mohamed, N. and Idrus, S.M. and Mohammad, A.B. and Harun, H. (2012) Proof-of-concept experiment of duty cycle division multiplexing with bit error rate analysis. Open Electrical & Electronic Engineering Journal, 6. pp. 1-6. ISSN 1874-1290,

Bhuiya, M.M.K. and Ahamed, Jamal Uddin and Chowdhury, M.S.U. and Sarkar, M.A.R. and Salam, B. and Saidur, Rahman and Masjuki, Haji Hassan and Kalam, M.A. (2012) Heat transfer enhancement and development of correlation for turbulent flow through a tube with triple helical tape inserts. International Communications in Heat and Mass Transfer, 39 (1). pp. 94-101. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2011.09.007.

Bhuiya, M.M.K. and Ahamed, Jamal Uddin and Sarkar, M.A.R. and Salam, B. and Masjuki, Haji Hassan and Kalam, M.A. and Saidur, Rahman and Sayem, A.S.M. (2012) Heat transfer and pressure drop characteristics in turbulent flow through a tube. Experimental Heat Transfer, 25 (4). pp. 301-322. ISSN 0891-6152, DOI https://doi.org/10.1080/08916152.2011.623819.

Bonab, R.S. and Rahman, S. (2012) Clean automotive technology: Hydraulic hybrid vehicles (HHVs). Applied Mechanics and Materials, 165. pp. 12-15. ISSN 1662-7482, DOI https://doi.org/10.4028/www.scientific.net/AMM.165.12.

Bushroa, Abdul Razak and Rahbari, R.G. and Masjuki, Haji Hassan and Muhamad, Muhamad Rasat (2012) Approximation of crystallite size and microstrain via XRD line broadening analysis in TiSiN thin films. Vacuum, 86 (8). pp. 1107-1112. ISSN 0042-207X, DOI https://doi.org/10.1016/j.vacuum.2011.10.011.

Chakrabarti, M.H. and Ali, M. and Usmani, J.N. and Khan, N.A. and Hasan, D.B. and Islam, M.S. and Abdul Raman, Abdul Aziz and Yusoff, Rozita and Irfan, M.F. (2012) Status of biodiesel research and development in Pakistan. Renewable and Sustainable Energy Reviews, 16 (7). pp. 4396-4405. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.03.064.

Chan, C.H. and Ngoh, G.C. and Yusoff, R. (2012) A brief review on anti diabetic plants: global distribution, active ingredients, extraction techniques and acting mechanisms. Pharmacognosy Reviews, 6 (11). pp. 22-28. ISSN 0976-2787, DOI https://doi.org/10.4103/0973-7847.95854.

Cheng, X.S. and Hamida, B.A. and Naji, A.W. and Arof, Hamzah and Ahmad, Harith and Harun, Sulaiman Wadi (2012) Compact and wide-band bismuth-based erbium-doped fibre amplifier based on two-stage and double-pass approaches. IET Optoelectronics, 6 (3). pp. 127-130. ISSN 1751-8768,

Ching, Yern Chee and Ching, Yun Chen and Yaacob, Iskandar (2012) Weathering resistance of solventborne polyurethane/nanosilica composite. Advanced Science Letters, 12 (1). pp. 165-169. ISSN 1936-6612, DOI https://doi.org/10.1166/asl.2012.2739.

Chong, Su Sin and Chong, Wu Yi and Harun, Sulaiman Wadi and Ahmad, Harith (2012) Regenerated fibre Bragg grating fabricated on high germanium concentration photosensitive fibre for sensing at high temperature. Optics & Laser Technology, 44 (4). pp. 821-824. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2011.11.024.

Chong, W.Y. and Lim, K.S. and Lim, W.H. and Harun, Sulaiman Wadi and Adikan, Faisal Rafiq Mahamd and Ahmad, Harith (2012) Spreading profile of evaporative liquid drops in thin porous layer. Physical Review E, 85 (1). 016314. ISSN 1539-3755,

Choudhury, I.A. and Bhuiyan, M.S.H. and Nukman, Y. (2012) An innovative approach to monitor the chip formation effect on tool state using acoustic emission in turning. International Journal of Machine Tools and Manufacture, 58. pp. 19-28. ISSN 0890-6955, DOI https://doi.org/10.1016/j.ijmachtools.2012.02.001.

Choudhury, I.A. and Bhuiyan, M.S.H. and Nukman, Y. (2012) A new approach to investigate tool condition using dummy tool holder and sensor setup. The International Journal of Advanced Manufacturing Technology, 61 (5-8). pp. 465-479. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-011-3722-7.

Choudhury, I.A. and Lawal, S.A. and Nukman, Y. (2012) Developments in the formulation and application of vegetable oil-based metalworking fluids in turning process. The International Journal of Advanced Manufacturing Technology. pp. 1-12. ISSN 0268-3768,

Cui, M. and Jang, M. and Cho, S.H. and Khim, J. and Cannon, F.S. (2012) A continuous pilot-scale system using coal-mine drainage sludge to treat acid mine drainage contaminated with high concentrations of Pb, Zn, and other heavy metals. Journal of Hazardous Materials, 215-21. pp. 122-128. ISSN 0304-3894, DOI https://doi.org/10.1016/j.jhazmat.2012.02.042.

Cui, M. and Jang, M. and Lee, S. and Khim, J. (2012) Sonochemical oxidation of cyanide using potassium peroxydisulfate as an oxidizing agent. Japanese Journal of Applied Physics, 51 (7). ISSN 0021-4922, DOI https://doi.org/10.1143/Jjap.51.07gd13.

Dahari, M. and Liu, Y. (2012) A review of auto-guided-vehicles routing algorithms. Advanced Materials Research, 479. pp. 443-456.

Davoodi, M.M. and Sapuan, S.M. and Aidy, Ali and Abu Osman, Noor Azuan and Oshkour, Azim Ataollahi and Wan Abas, Wan Abu Bakar (2012) Development process of new bumper beam for passenger car: a review. Materials & Design, 40. pp. 304-313. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2012.03.060.

Dhakshyani, R. and Nukman, Y. and Abu Osman, Noor Azuan (2012) Rapid prototyping models for dysplastic hip surgeries in Malaysia. European Journal of Orthopaedic Surgery and Traumatology, 22 (1). pp. 41-46. ISSN 1633-8065, DOI https://doi.org/10.1007/s00590-011-0778-x.

Dhakshyani, R. and Nukman, Y. and Azuan, A.N. (2012) FDM models and FEA in dysplastic hip. Rapid Prototyping Journal, 18 (3). pp. 215-221. ISSN 1355-2546, DOI https://doi.org/10.1108/13552541211218144.

Diya'uddeen, B.H. and Abdul Raman, Abdul Aziz and Daud, Wan Mohd Ashri Wan and Chakrabarti, M.H. (2012) Performance evaluation of biodiesel from used domestic waste oils: a review. Process Safety and Environmental Protection, 90 (3). pp. 164-179. ISSN 09575820 (ISSN),

Doufesh, H. and Faisal, T. and Lim, K.S. and Ibrahim, F. (2012) EEG spectral analysis on muslim prayers. Applied Psychophysiology Biofeedback, 37 (1). pp. 11-18. ISSN 1090-0586, DOI https://doi.org/10.1007/s10484-011-9170-1.

Emami, Siamak Dawazdah and Abdul-Rashid, Hairul Azhar and Ahmad, Harith and Ahmadi, A. and Harun, Sulaiman Wadi (2012) Effect of transverse distribution profile of thulium on the performance of thulium-doped fibre amplifiers. Ukrainian Journal of Physical Optics, 13 (2). pp. 74-81. ISSN 1609-1833, DOI https://doi.org/10.3116/16091833/13/2/74/2012.

Emami, Siamak Dawazdah and Abdul-Rashid, Hairul Azhar and Yasin, S.Z.M. and Shariff, K.A.M. and Mirnia, Seyed Edriss and Parvizi, Amin and Ahmad, Harith and Harun, Sulaiman Wadi (2012) S-band gain and noise figure improvements in thulium-doped fiber amplifier by using macro-bending approach. Applied Physics B, 108 (4). pp. 807-813. ISSN 0946-2171, DOI https://doi.org/10.1007/s00340-012-5216-1.

Endut, Z. and Abd Shukor, Mohd Hamdi and Basirun, Wan Jefrey (2012) Supercapacitance of bamboo-type anodic titania nanotube arrays. Surface and Coatings Technology. ISSN 0257-8972,

Eshraghi, A. and Abu Osman, Noor Azuan and Karimi, M.T. and Gholizadeh, H. and Ali, S. and Wan Abas, Wan Abu Bakar (2012) Quantitative and qualitative comparison of a new prosthetic suspension system with two existing suspension systems for lower limb amputees. American Journal of Physical Medicine & Rehabilitation, 91 (12). pp. 1028-1038. ISSN 0894-9115, DOI https://doi.org/10.1097/PHM.0b013e318269d82a.

Eshraghi, A. and Maroufi, N. and Sanjari, M.A. and Saeedi, H. and Keyhani, M.R. and Gholizadeh, H. and Abu Osman, Noor Azuan (2012) Effect of Milwaukee brace on static and dynamic balance of female hyperkyphotic adolescents. Prosthetics and Orthotics International. ISSN 0309-3646, DOI https://doi.org/10.1177/0309364612448805.

Eshraghi, Arezoo and Abu Osman, Noor Azuan and Gholizadeh, Hossein and Karimi, Mohammad Hossein and Ali, Sadeeq (2012) Pistoning assessment in lower limb prosthetic sockets. Prosthetics and Orthotics International, 36 (1). pp. 15-24. ISSN 0309-3646, DOI https://doi.org/10.1177/0309364611431625.

Fadli, A. and Sopyan, I. and Ramesh, S. (2012) Porous alumina from protein foaming-consolidation method containing hydrothermal derived hydroxyapatite powder. Applied Mechanics and Materials, 117-11. pp. 782-785. ISSN 3037852801,

Faisal, T. and Taib, M.N. and Ibrahim, F. (2012) Adaptive Neuro-Fuzzy Inference System for diagnosis risk in dengue patients. Expert Systems with Applications, 39 (4). pp. 4483-4495. ISSN 0957-4174, DOI https://doi.org/10.1016/j.eswa.2011.09.140.

Faisal, T. and Taib, M.N. and Ibrahim, Fatimah (2012) Neural network diagnostic system for dengue patients risk classification. Journal of Medical Systems, 36 (2). pp. 661-676. ISSN 0148-5598, DOI https://doi.org/10.1007/s10916-010-9532-x.

Faraji, G. and Abrinia, K. and Mashhadi, M.M. and Abd Shukor, Mohd Hamdi (2012) An upper-bound analysis for frictionless TCAP process. Archive of Applied Mechanics. pp. 1-11. ISSN 0939-1533,

Fatehi, Hossein and Emami, Siamak Dawazdah and Zarifi, Atiyeh and Zahedi, Fatemeh Zahra and Mirnia, Seyed Edriss and Zarei, Arman and Ahmad, Harith and Harun, Sulaiman Wadi (2012) Analytical Model for Broadband Thulium-Bismuth-Doped Fiber Amplifier. IEEE Journal of Quantum Electronics, 48 (8). pp. 1052-1058. ISSN 0018-9197, DOI https://doi.org/10.1109/JQE.2012.2199739.

Fayyadh, M.M. and Razak, Hashim Abdul (2012) Assessment of effectiveness of CFRP repaired RC beams under different damage levels based on flexural stiffness. Construction and Building Materials, 37. pp. 125-134. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.07.021.

Fayyadh, M.M. and Razak, Hashim Abdul (2012) Condition assessment of elastic bearing supports using vibration data. Construction and Building Materials, 30. pp. 616-628. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2011.12.043.

Fayyadh, Moatasem M. and Razak, Hashim Abdul (2012) Assessment of adhesive setting time in reinforced concrete beams strengthened with carbon fibre reinforced polymer laminates. Materials & Design, 37. pp. 64-72. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.12.031.

Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2012) Degradation of automotive materials in palm biodiesel. Energy, 40 (1). pp. 76-83. ISSN 0360-5442,

Fuad, M.N.M. and Hussain, Mohd Azlan and Zakaria, A. (2012) Optimization strategy for long-term catalyst deactivation in a fixed-bed reactor for methanol synthesis process. Computers & Chemical Engineering, 44. pp. 104-126. ISSN 0098-1354, DOI https://doi.org/10.1016/j.compchemeng.2012.05.003.

Gamil, A.A.A. and Mekhilef, Saad and Said, Suhana Mohd (2012) Techno economic analysis of using solar water heaters with evacuated tubes in Khartoum, Sudan. Energy Education Science and Technology Part A: Energy Science and Research, 28 (2). pp. 611-622. ISSN 1308-772X,

Ghani, A.R.A. and Hassan, Mohamed Mohsen Abdel-Naeim and Taha, Z. and Hamdi, M. (2012) Effect of slot geometry on the impact response of square column. Advanced Science Letters, 13 (1). pp. 1-7. ISSN 1936-6612,

Gholizadeh, H. and Abu Osman, Noor Azuan and Eshraghi, A. and Ali, S. and Sævarsson, S.K. and Wan Abas, Wan Abu Bakar and Pirouzi, G.H. (2012) Transtibial prosthetic suspension: less pistoning versus easy donning and doffing. Journal of Rehabilitation Research and Development, 49 (9). pp. 1321-1330. ISSN 0748-7711 , DOI https://doi.org/10.1682/JRRD.2011.11.0221.

Gholizadeh, Hossein and Abu Osman, Noor Azuan and Kamyab, Mojtaba and Eshraghi, Arezoo and Luviksdottir, Asa Gulaug and Wan Abas, Wan Abu Bakar (2012) Clinical evaluation of two prosthetic suspension systems in a bilateral transtibial amputee. American Journal of Physical Medicine & Rehabilitation, 91 (10). pp. 894-898. ISSN 0894-9115, DOI https://doi.org/10.1097/PHM.0b013e31823c74d7.

Gholizadeh, Hossein and Abu Osman, Noor Azuan and Kamyab, Mojtaba and Eshraghi, Arezoo and Wan Abas, Wan Abu Bakar and Azam, M.N. (2012) Transtibial prosthetic socket pistoning: Static evaluation of Seal-In® X5 and Dermo® Liner using motion analysis system. Clinical Biomechanics, 27 (1). pp. 34-39. ISSN 0268-0033, DOI https://doi.org/10.1016/j.clinbiomech.2011.07.004.

Gurung, A. and Kim, S.H. and Joo, J.H. and Jang, M. and Oh, S.E. (2012) Assessing toxicities of industrial effluents and 1,4-dioxane using sulphur-oxidising bacteria in a batch test. Water and Environment Journal, 26 (2). pp. 224-234. ISSN 1747-6585, DOI https://doi.org/10.1111/j.1747-6593.2011.00280.x.

Hajimolana, S. and Hussain, Mohd Azlan and Soroush, M. and Wan Daud, W.A. and Chakrabarti, M.H. (2012) Multilinear-model predictive control of a tubular solid oxide fuel cell system. Industrial & Engineering Chemistry Research, 52 (1). pp. 430-441. ISSN 0888-5885, DOI https://doi.org/10.1021/ie301107r.

Hajimolana, S.A. and Hussain, Mohd Azlan and Daud, Wan Mohd Ashri Wan and Chakrabarti, M.H. (2012) Neural network predictive control of a SOFC fuelled with ammonia. International Journal of Electrochemical Science, 7 (4). pp. 3737-3749. ISSN 1452-3981,

Hajimolana, S.A. and Hussain, Mohd Azlan and Natesan, J. and Tonekaboni Moghaddam, S.M. (2012) Neural network predictive control of a tubular solid oxide fuel cell. Computer Aided Chemical Engineering, 31. pp. 390-394. ISSN 15707946 , DOI https://doi.org/10.1016/B978-0-444-59507-2.50070-6.

Hajimolana, Sayed Ahmad and Hussain, Mohd Azlan and Daud, Wan Mohd Ashri Wan and Chakrabarti, M.H. (2012) Dynamic modelling and sensitivity analysis of a tubular SOFC fuelled with NH3 as a possible replacement for H2. Chemical Engineering Research and Design, 90 (11). pp. 1871-1882. ISSN 02638762, DOI https://doi.org/10.1016/j.cherd.2012.03.004.

Hajimolana, Sayed Ahmad and Hussain, Mohd Azlan and Soroush, M. and Daud, Wan Mohd Ashri Wan and Chakrabarti, M.H. (2012) Modeling of a tubular-SOFC: the effect of the thermal radiation of fuel components and CO participating in the electrochemical process. Fuel Cells, 12 (5). pp. 761-772. ISSN 1615-6846, DOI https://doi.org/10.1002/fuce.201200056.

Halder, Arindam and Paul, Mukul Chandra and Damanhuri, Siti Sarah Ahmad and Huri, N.A.D. and Hamzah, Azura and Harun, Sulaiman Wadi and Ahmad, Harith and Das, Sourav and Pal, Mrinmay and Bhadra, Shyamal Kumar (2012) Upconversion luminescence in Tm3+/Yb3+co-doped double-clad silica fibers under 980 nm cladding pumping. Journal of Modern Optics, 59 (6). pp. 527-532. ISSN 0950-0340, DOI https://doi.org/10.1080/09500340.2011.636154.

Halder, Arindam and Paul, Mukul Chandra and Shahabuddin, Nurul Shahrizan and Harun, Sulaiman Wadi and Saidin, Norazlina and Damanhuri, Siti Sarah Ahmad and Ahmad, Harith and Das, Shyamal and Pal, Mrinmay and Bhadra, Shyamal Kumar (2012) Wideband Spectrum-Sliced ASE Source Operating at 1900-nm Region Based on a Double-Clad Ytterbium-Sensitized Thulium-Doped Fiber. IEEE Photonics Journal, 4 (1). pp. 14-18. ISSN 1943-0655, DOI https://doi.org/10.1109/JPHOT.2011.2177651.

Hamdan, Ahmad and Sarhan, Ahmed AD and Abd Shukor, Mohd Hamdi (2012) An optimization method of the machining parameters in high-speed machining of stainless steel using coated carbide tool for best surface finish. The International Journal of Advanced Manufacturing Technology, 58 (1-4). pp. 81-91. ISSN 0268-3768,

Hamida, B.A. and Cheng, X.S. and Harun, Sulaiman Wadi and Naji, A.W. and Arof, Hamzah and Khan, S. and Alkhateeb, W. and Ahmad, Harith (2012) Wideband and compact erbium-doped fiber amplifier using parallel double-pass configuration. Quantum Electronics, 54 (3). pp. 629-631. ISSN 1063-7818,

Hamida, Belal Ahmed and Cheng, Xiau San and Harun, Sulaiman Wadi and Naji, Ahmed Wathik and Arof, Hamzah and Al-Khateeb, Wajdi Fawzi Mohammed and Khan, Sheroz and Ahmad, Harith (2012) Wideband and flat-gain amplifier based on high concentration erbium-doped fibres in parallel double-pass configuration. Quantum Electronics, 42 (3). pp. 241-243. ISSN 1063-7818, DOI https://doi.org/10.1070/QE2012v042n03ABEH014696.

Hamida, Belal Ahmed and Cheng, Xiau San and Naji, Ahmed Wathik and Ahmad, Harith and Al-Khateeb, Wajdi Fawzi Mohammed and Khan, Sheroz and Harun, Sulaiman Wadi (2012) Optical amplifier with flat-gain and wideband operation utilizing highly concentrated erbium-doped fibers. Journal of Nonlinear Optical Physics & Materials, 21 (01). p. 1250005. ISSN 0218-8635, DOI https://doi.org/10.1142/S0218863512500051.

Haque, A. and Lim, B.H. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2012) Die attach properties of Zn-Al-Mg-Ga based high-temperature lead-free solder on Cu lead-frame. Journal of Materials Science: Materials in Electronics, 23 (1). pp. 115-123. ISSN 0957-4522,

Harun, Sulaiman Wadi and Lim, Kok Sing and Ahmad, Harith (2012) Microfiber structures for sensor applications. Journal of Nonlinear Optical Physics & Materials, 21 (01). p. 1250003. ISSN 0218-8635, DOI https://doi.org/10.1142/S0218863512500038.

Hasan, D.B. and Abdul Raman, Abdul Aziz and Daud, Wan Mohd Ashri Wan (2012) Using D-optimal experimental design to optimise remazol black B mineralisation by Fenton-like peroxidation. Environmental Technology, 33 (10-12). pp. 1111-1121. ISSN 0959-3330,

Hasan, Diya'uddeen Basheer and Abdul Raman, Abdul Aziz and Daud, Wan Mohd Ashri Wan (2012) Oxidative mineralisation of petroleum refinery effluent using Fenton-like process. Chemical Engineering Research and Design, 90 (2). pp. 298-307. ISSN 0263-8762, DOI https://doi.org/10.1016/j.cherd.2011.06.010.

Hasanuzzaman, M. and Rahim, N.A. and Hosenuzzaman, M. and Saidur, Rahman and Mahbubul, I.M. and Rashid, M.M. (2012) Energy savings in the combustion based process heating in industrial sector. Renewable and Sustainable Energy Reviews, 16 (7). pp. 4527-4536. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.05.027.

Haseeb, A.S. Md. Abdul and Arafat, M.M. and Johan, M.R. (2012) Stability of molybdenum nanoparticles in Sn-3.8Ag-0.7Cu solder during multiple reflow and their influence on interfacial intermetallic compounds. Materials Characterization, 64. pp. 27-35. ISSN 1044-5803,

Hashimoto, S. and Ohmura, N. and Kim, S.J. and Ibrahim, S. (2012) Advances in mixing technology: recent advances in mixing research and development. International Journal of Chemical Engineering, 2012. pp. 1-2. ISSN 1687-8078, DOI https://doi.org/10.1155/2012/316891.

Hassan, L.H. and Moghavvemi, M. and Almurib, H.A.F. (2012) Modeling UPFC into multi-machine power systems. Arabian Journal for Science and Engineering, 37 (6). pp. 1613-1624. ISSN 13198025, DOI https://doi.org/10.1007/s13369-012-0273-7.

Hassan, L.H. and Moghavvemi, M. and Almurib, H.A.F. and Muttaqi, K.M. and Du, H. (2012) Damping of low-frequency oscillations and improving power system stability via auto-tuned PI stabilizer using Takagi-Sugeno fuzzy logic. International Journal of Electrical Power & Energy Systems, 38 (1). pp. 72-83. ISSN 0142-0615, DOI https://doi.org/10.1016/j.ijepes.2011.12.022.

Hassan, M.A. and Abouel-Kasem, A. and El-Sharief, M.A. and Yusof, F. (2012) Evaluation of the material constants of Nitrile Butadiene Rubbers (NBR) with different Carbon Black loading (CB): FE-simulation and experimental. Polymer. ISSN 0032-3861,

Hassan, Mohamed Mohsen Abdel-Naeim and El-Sharief, Mahmoud A. and Aboul-Kasem, Ahmed and Ramesh, Singh and Purbolaksono, Judha (2012) A fuzzy model for evaluation and prediction of slurry erosion of 5127 steels. Materials & Design, 39. pp. 186-191. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2012.02.012.

Hassan, Mohamed Mohsen Abdel-Naeim and Hamdi, M. and Naderi, S. and Zahedi, F. (2012) Effect of curvature and thickness of aluminum shells on the energy absorption in low velocity impact. Advanced Materials Research, 488. pp. 40-45. ISSN 3037853824,

Hassan, Mohamed Mohsen Abdel-Naeim and Hamdi, M. and Noma, A. (2012) The nonlinear elastic and viscoelastic passive properties of left ventricular papillary muscle of a guinea pig heart. Journal of the Mechanical Behavior of Biomedical Materials, 5 (1). pp. 99-109. ISSN 1751-6161,

Hassan, Mohamed Mohsen Abdel-Naeim and Saleh, M.A.E. and Takakura, Norio and Ramesh, Singh and Purbolaksono, Judha (2012) Effect of bulge shape on wrinkling formation and strength of stainless steel thin sheet. Materials & Design, 42. pp. 37-45. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2012.05.035.

Hisham, H. and Amouzad Mahdiraji, G. and Abas, A. and Mahdi, M.A. and Adikan, Faisal Rafiq Mahamd (2012) Characterization of transient response in a fiber grating fabry-perot lasers. Photonics Journal, IEEE, 4 (6). 2353 - 2371 . ISSN 1943-0655, DOI https://doi.org/10.1109/JPHOT.2012.2231957.

Hisham, H.K. and Abas, A.F. and Mahdiraji, G.A. and Mahdi, M.A. and Noor, A.S.M. (2012) Relative intensity noise reduction by optimizing fiber grating fabry-perot laser parameters. IEEE Journal of Quantum Electronics, 48 (3). pp. 375-383. ISSN 0018-9197, DOI https://doi.org/10.1109/jqe.2011.2181489.

Hisham, H.K. and Abas, A.F. and Mahdiraji, G.A. and Mandi, M.A. (2012) Effect of temperature and external optical feedback on intensity and phase noise characteristics in single-mode fiber grating Fabry-Perot laser. Photonics (ICP). pp. 370-376. ISSN 978146731463,

Hisham, H.K. and Abas, A.F. and Mahdiraji, Ghafour Amouzad and Mahdi, M.A. and Muhammad Noor, A.S. (2012) Comment on: “Theoretical calculation of turn-on delay time of VCSEL and effect of carriers recombination” [Opt. Laser Technol. 39 (2007) 997–1001]. Optics & Laser Technology, 44 (6). pp. 1995-1998. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2012.01.012.

Hisham, H.K. and Abas, A.F. and Mahdiraji, Ghafour Amouzad and Mahdi, M.A. and Noor, A.S.M. (2012) Characterization of phase noise in a single-mode fiber grating Fabry Perot laser. Journal of Modern Optics, 59 (4). pp. 393-401. ISSN 0950-0340, DOI https://doi.org/10.1080/09500340.2011.629060.

Hisham, H.K. and Abas, A.F. and Mahdiraji, Ghafour Amouzad and Mahdi, M.A. and Noor, A.S.M. (2012) Improving the characteristics of the modulation response for fiber Bragg grating Fabry-Perot lasers by optimizing model parameters. Optics & Laser Technology, 44 (6). pp. 1698-1705. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2012.01.027.

Hisham, H.K. and Mahdiraji, Ghafour Amouzad and Abas, A.F. and Mahdi, M.A. and Adikan, Faisal Rafiq Mahamd (2012) Characterization of Turn-On Time Delay in a Fiber Grating Fabry–Perot Lasers. IEEE Photonics Journal, 4 (5). pp. 1662-1678. ISSN 1943-0655, DOI https://doi.org/10.1109/JPHOT.2012.2214207.

Hisham, Hisham Kadhum and Abas, Ahmad Fauzi and Mahdiraji, Ghafour Amouzad and Mahdi, Mohd Adzir and Muhammad Noor, Ahmad Shukri (2012) Characterization of small-signal intensity modulation of single-mode fiber grating fabry–perot laser source. Optical Review, 19 (2). pp. 64-70. ISSN 1340-6000, DOI https://doi.org/10.1007/s10043-012-0014-x.

Ho, Y.K. and Shamiri, A. and Mjalli, F.S. and Hussain, Mohd Azlan (2012) Control of industrial gas phase propylene polymerization in fluidized bed reactors. Journal of Process Control, 22 (6). pp. 947-958. ISSN 0959-1524, DOI https://doi.org/10.1016/j.jprocont.2012.04.003.

Hosen, M.A. and Hussain, Mohd Azlan (2012) Optimization and control of polystyrene batch reactor using hybrid based model. Computer Aided Chemical Engineering, 31. pp. 760-764. ISSN 15707946,

Hussain, Mohd Azlan and Manan, Z.A. and Aziz, N. (2012) Recent developments on pse education and research in Malaysia. Computer Aided Chemical Engineering, 31. pp. 70-74. ISSN 15707946,

Ibrahim, F. and Ahmad, S.A. and Woo, P.J. and Wan, W.A.B.A. (2012) Biomechanical response of the upper body during prostration in salat and the child's pose: a preliminary study. Journal of Physical Therapy Science, 24 (10). pp. 1021-1024. ISSN 0915-5287, DOI https://doi.org/10.1589/jpts.24.1021.

Ibrahim, I. and Ibrahim, Z. and Khalil, K. and Mokji, M.M. and Abu Bakar, S.A.R.S. and Mokhtar, N. and Ahmad, W.K.W. (2012) An improved defect classification algorithm for six printing defects and its implementation on real printed circuit board images. International Journal of Innovative Computing Information and Control, 8 (5A). pp. 3239-3250. ISSN 1349-4198,

Ibrahim, S. and Jasnin, S.N. and Wong, S.D. and Baker, I.F. (2012) Zwietering's equation for the suspension of porous particles and the use of curved blade impellers. International Journal of Chemical Engineering, 2012. pp. 1-13. ISSN 1687-8078, DOI https://doi.org/10.1155/2012/749760.

Ibrahim, Z. and Khalid, N.K. and Mukred, J.A.A. and Buyamin, S. and Yusof, Z.M. and Saaid, M.F.M. and Mokhtar, N. and Engelbrecht, A.R. (2012) A DNA sequence design for DNA computation based on binary vector evaluated particle swarm optimization. International Journal of Unconventional Computing, 8 (2). pp. 119-137. ISSN 15487199,

Ibrehem, A.S. and Hussain, Mohd Azlan and Ghasem, N.M. (2012) Decentralized advanced model predictive controller of fluidized-bed for polymerization process. Iranian Journal of Chemistry & Chemical Engineering-International English Edition, 31 (4). pp. 91-117. ISSN 1021-9986,

Ijam, A. and Saidur, Rahman (2012) Nanofluid as a coolant for electronic devices (cooling of electronic devices). Applied Thermal Engineering, 32. pp. 76-82. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2011.08.032.

Ijam, A. and Saidur, Rahman and Ganesan, P. (2012) Cooling of minichannel heat sink using nanofluids. International Communications in Heat and Mass Transfer, 39 (8). pp. 1188-1194. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2012.06.022.

Illias, Hazlee Azil and Bakar, Ab Halim Abu and Mokhlis, Hazlie and Halim, Syahirah Abd (2012) Calculation of inductance and capacitance in power system transmission lines using finite element analysis method. Obliczenia indukcyjności i pojemności linii przesyłowej z wykorzystaniem metody elementu skończonego, 88 (10 A). pp. 278-283. ISSN 00332097,

Ishaque, K. and Salam, Z. and Amjad, M. and Mekhilef, Saad (2012) An improved particle swarm optimization (PSO) based MPPT for PV With reduced steady-state oscillation. IEEE Transactions on Power Electronics, 27 (8). pp. 3627-3638. ISSN 0885-8993,

Ishaque, K. and Salam, Z. and Mekhilef, Saad and Shamsudin, A. (2012) Parameter extraction of solar photovoltaic modules using penalty-based differential evolution. Applied Energy, 99. pp. 297-308. ISSN 03062619, DOI https://doi.org/10.1016/j.apenergy.2012.05.017.

Islam, A.B.M. and Jameel, Mohammed and Jumaat, Mohd Zamin and Shirazi, S.M. and Salman, Firas A. (2012) Review of offshore energy in Malaysia and floating spar platform for sustainable exploration. Renewable and Sustainable Energy Reviews, 16 (8). pp. 6268-6284. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.07.012.

Islam, A.B.M. and Jameel, Mohammed and Uddin, Md Alhaz and Jumaat, Mohd Zamin (2012) Competent building elevation for incorporating base isolation in aseismic structure. Procedia EngineeringInternational Conference on Advances Science and Contemporary Engineering 2012, 50. pp. 882-892. ISSN 1877-7058,

Islam, A.B.M.S. and Hussain, Raja Rizwan and Jameel, Mohammed and Jumaat, Mohd Zamin (2012) Non-linear time domain analysis of base isolated multi-storey building under site specific bi-directional seismic loading. Automation in Construction, 22. pp. 554-566. ISSN 0926-5805, DOI https://doi.org/10.1016/j.autcon.2011.11.017.

Islam, A.B.M.S. and Jameel, M. and Jumaat, Mohd Zamin (2012) Oil and gas energy potential at Malaysian seabed and spar platform for deepwater installation. International Journal of Green Energy, 9 (2). pp. 111-120. ISSN 1543-5075, DOI https://doi.org/10.1080/15435075.2011.621493.

Islam, M.R. and Rahim, N.A. and Solangi, K.H. and Saidur, Rahman (2012) Assessing wind energy potentiality for selected sites in Malaysia. Energy Education Science and Technology Part a-Energy Science and Research, 29 (1). pp. 611-626. ISSN 1308-772X, DOI https://doi.org/10.1016/j.energy.2010.12.011.

Ismail, M.A. and Tan, S.J. and Shahabuddin, N.S. and Harun, Sulaiman Wadi and Arof, Hamzah and Ahmad, Harith (2012) Performance comparison of mode-locked erbium-doped fiber laser with nonlinear polarization rotation and saturable absorber approaches. Chinese Physics Letters, 29 (5). ISSN 0256-307X,

Jameel, A.B.M.M. and Islam, S. and Khaleel, M. and Jumaat, Mohd Zamin (2012) Nonlinear finite element analysis of spar platform. Advanced Science Letters, 13 (1). pp. 723-726. ISSN 19366612, DOI https://doi.org/10.1166/asl.2012.3851.

Jameel, M. and Islam, A.B.M. and Salman, F.A. and Khaleel, M. and Jumaat, Mohd Zamin (2012) Wave data for shallow and deep water sedimentary basins of Malaysia. Advanced Science Letters, 14 (1). pp. 360-364. ISSN 1936-6612, DOI https://doi.org/10.1166/asl.2012.3964.

Jameel, M. and Saiful Islam, A.B.M. and Hussain, R.R. and Khaleel, M. and Zaheer, M.M. (2012) Optimum structural modelling for tall buildings. The Structural Design of Tall and Special Buildings. ISSN 1541-7808,

Jamian, J.J. and Lim, Z.J. and Dahalan, W.M. and Mokhlis, Hazlie and Mustafa, M.W. and Abdullah, M.N. (2012) Reconfiguration distribution network with multiple distributed generation operation types using simplified artificial bees colony. International Review of Electrical Engineering, 7 (4). pp. 5108-5118. ISSN 1827-6660,

Jamil, Z. and Annuar, M.S.M. and Ibrahim, S. and Vikineswary, S. (2012) Kinetic modeling of batch photofermentation hydrogen gas production by Rhodopseudomonas palustris PBUM001. Journal of Renewable and Sustainable Energy, 4 (4). ISSN 1941-7012, DOI https://doi.org/10.1063/1.4737131.

Jasim, Ali Abdulhadi and Lim, Kok Sing and Muhammad, Munir Zuhdin and Arof, Hamzah and Ahmad, Harith and Harun, Sulaiman Wadi (2012) Transmission characteristic of multi-turn microfiber coil resonator. Optics & Laser Technology, 44 (6). pp. 1791-1795. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2012.01.035.

Jasim, Ali Abdulhadi and Zulkifli, Ahmad Zarif and Muhammad, Munir Zuhdin and Ahmad, Harith and Harun, Sulaiman Wadi (2012) Fabrication and Characterization of a 2 × 2 Microfiber Knot Resonator Coupler. Chinese Physics Letters, 29 (8). 084204. ISSN 0256-307X, DOI https://doi.org/10.1088/0256-307X/29/8/084204.

Jeirani, Z. and Mohamed Jan, B. and Si Ali, B. and Noor, I.M. and See, C.H. and Saphanuchart, W. (2012) The optimal mixture design of experiments: Alternative method in optimizing the aqueous phase composition of a microemulsion. Chemometrics and Intelligent Laboratory Systems, 112. pp. 1-7. ISSN 0169-7439, DOI https://doi.org/10.1016/j.chemolab.2011.10.008.

Jeirani, Z. and Yusuf, M.M. and Jan, B.M. and Abdul Raman, Abdul Aziz (2012) Rheological study of saraline-based super light weight completion fluid in underbalanced perforation. Oil Gas-European Magazine, 38 (1). pp. 18-21.

Jumaat, S.A. and Musirin, I. and Othman, M.M. and Mokhlis, Hazlie (2012) Comparison of FACTS device installation in power transmission system. International Review on Modelling and Simulations, 5 (4). p. 1679. ISSN 1974-9821, DOI http://connection.ebscohost.com/c/articles/84994994/comparison-facts-device-installation-power-transmission-system.

Jumaat, S.A. and Musirin, I. and Othman, M.M. and Mokhlis, Hazlie (2012) Computational intelligence based technique in multiple facts devices installation for power system security. Journal of Theoretical and Applied Information Technology, 46 (2). pp. 537-549. ISSN 1992-8645,

Kadri, Nahrizul Adib and Razak, Mohd Azhar Mohd and Ibrahim, Fatimah (2012) Near real-time electrochemical analysis of carcinogenic cell lines using planar microelectrodes. International Journal of Electrochemical Science, 7 (6). pp. 5633-5642. ISSN 1452-3981,

Kalantar, Z.N. and Karim, Mohamed Rehan and Mahrez, A. (2012) A review of using waste and virgin polymer in pavement. Construction and Building Materials, 33. pp. 55-62. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.01.009.

Kamyar, A. and Saidur, Rahman and Hasanuzzaman, M. (2012) Application of computational fluid dynamics (CFD) for nanofluids. International Journal of Heat and Mass Transfer, 55 (15-16). pp. 4104-4115. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2012.03.052.

Karimi, M. and Mohamad, H. and Mokhlis, Hazlie and Bakar, A.H.A. (2012) Under-Frequency Load Shedding scheme for islanded distribution network connected with mini hydro. International Journal of Electrical Power & Energy Systems, 42 (1). pp. 127-138. ISSN 0142-0615, DOI https://doi.org/10.1016/j.ijepes.2012.03.017.

Karimi, M. and Mohamad, H. and Mokhlis, Hazlie and Bakar, A.H.A. (2012) A new approach of under-frequency load shedding technique in an islanded distribution network. International Review of Electrical Engineering, 7 (2). pp. 4155-4162. ISSN 18276660,

Karimi, M. and Mokhlis, Hazlie and Bakar, A.H.A. and Shahriari, A. and Kazeminejad, M. (2012) Distribution state estimation incorporating load modelling. Przeglad Elektrotechniczny, 88 (11 A). pp. 166-169. ISSN 00332097,

Khaleel, O.R. and Razak, Hashim Abdul (2012) The effect of powder type on the setting time and self compactability of mortar. Construction and Building Materials, 36. pp. 20-26. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.04.079.

Khalil, M. and Jan, B.M. and Abdul Raman, Abdul Aziz (2012) The viscosity of nontraditional lightweight completion fluid at elevated temperature and pressure. Petroleum Science and Technology. pp. 1939-1945. ISSN 1091-6466, DOI https://doi.org/10.1080/10916466.2010.512887.

Khalil, M. and Mohamed Jan, B. (2012) Viscoplastic Modeling of a Novel Lightweight Biopolymer Drilling Fluid for Underbalanced Drilling. Industrial and Engineering Chemistry Research, 51 (10). pp. 4056-4068. ISSN 0888-5885, DOI https://doi.org/10.1021/ie200811z.

Khalil, S.H. and Aroua, M.K. and Daud, W.M.A.W. (2012) Study on the improvement of the capacity of amine-impregnated commercial activated carbon beds for Co-2 adsorbing. Chemical Engineering Journal, 183. pp. 15-20. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2011.12.011.

Krabbenhoft, K. and Karim, M.R. and Lyamin, A.V. and Sloan, S.W. (2012) Associated computational plasticity schemes for nonassociated frictional materials. International Journal for Numerical Methods in Engineering, 90 (9). pp. 1089-1117. ISSN 0029-5981, DOI https://doi.org/10.1002/Nme.3358.

Krishnan, S. and Haseeb, A.S. Md. Abdul and Johan, M.R. (2012) Preparation and low-temperature sintering of cu nanoparticles for high-power devices. IEEE Transactions on Components, Packaging, and Manufacturing Technology, 2 (4). pp. 587-592. ISSN 2156-3950,

Ku, P.X. and Abu Osman, Noor Azuan and Yusof, A. and Wan Abas, Wan Abu Bakar (2012) The effect on human balance of standing with toe-extension. PLoS ONE, 7 (7). ISSN 1932-6203, DOI PMID: 22848523.

Ku, Pei Xuan and Abu Osman, Noor Azuan and Yusof, Ashril and Wan Abas, Wan Abu Bakar (2012) Biomechanical evaluation of the relationship between postural control and body mass index. Journal of Biomechanics, 45 (9). pp. 1638-1642. ISSN 0021-9290, DOI https://doi.org/10.1016/j.jbiomech.2012.03.029.

Kubba, H. and Mokhlis, Hazlie (2012) An enhanced RCGA for a rapid and reliable load flow solution of electrical power systems. International Journal of Electrical Power & Energy Systems, 43 (1). pp. 304-312. ISSN 0142-0615, DOI https://doi.org/10.1016/j.ijepes.2012.04.034.

Lee, B.T. and Ranville, J.F. and Wildeman, T.R. and Jang, M. and Shim, Y.S. and Ji, W.H. and Park, H.S. and Lee, H.J. (2012) Assessment of Young Dong tributary and Imgok Creek impacted by Young Dong coal mine, South Korea. Environmental Geochemistry and Health, 34 (SUPPL.). pp. 95-103. ISSN 0269-4042, DOI https://doi.org/10.1007/s10653-011-9415-1.

Lee, K.Y. and Chin, K.M. and Ramesh, S. and Tan, C.Y. and Teng, W.D. and Sopyan, I. (2012) Characterization of forsterite bioceramics. Advanced Materials Research, 576. pp. 195-198.

Lee, K.Y. and Chin, K.M. and Ramesh, Singh and Tan, C.Y. and Hassan, M.A. and Purbolaksono, J. and Teng, W.D. and Sopyan, I. (2012) Effect of ultrasonication on synthesis of forsterite ceramics. Advanced Materials Research, 576. pp. 252-255. ISSN 1022-6680, DOI https://doi.org/10.4028/www.scientific.net/AMR.576.252.

Leong, K.Y. and Saidur, Rahman and Khairulmaini, M. and Michael, Z. and Kamyar, A. (2012) Heat transfer and entropy analysis of three different types of heat exchangers operated with nanofluids. International Communications in Heat and Mass Transfer, 39 (6). pp. 838-843. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2012.04.003.

Leong, K.Y. and Saidur, Rahman and Mahlia, T.M.I. and Yau, Y.H. (2012) Entropy generation analysis of nanofluid flow in a circular tube subjected to constant wall temperature. International Communications in Heat and Mass Transfer, 39 (8). pp. 1169-1175. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2012.06.009.

Leong, K.Y. and Saidur, Rahman and Mahlia, T.M.I. and Yau, Y.H. (2012) Modeling of shell and tube heat recovery exchanger operated with nanofluid based coolants. International Journal of Heat and Mass Transfer, 55 (4). pp. 808-816. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2011.10.027.

Leong, K.Y. and Saidur, Rahman and Mahlia, T.M.I. and Yau, Y.H. (2012) Performance investigation of nanofluids as working fluid in a thermosyphon air preheater. International Communications in Heat and Mass Transfer, 39 (4). pp. 523-529. ISSN 07351933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2012.01.014.

Lim, Kok Sing and Aryanfar, Iman and Chong, Wu Yi and Cheong, Yew Ken and Harun, Sulaiman Wadi and Ahmad, Harith (2012) Integrated Microfibre Device for Refractive Index and Temperature Sensing. Sensors, 12 (9). pp. 11782-11789. ISSN 1424-8220, DOI https://doi.org/10.3390/s120911782.

Madlool, N.A. and Saidur, Rahman and Rahim, N.A. and Islam, M.R. and Hossian, M.S. (2012) An exergy analysis for cement industries: an overview. Renewable and Sustainable Energy Reviews, 16 (1). pp. 921-932. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2011.09.013.

Mahbubul, I.M. and Saidur, Rahman and Amalina, M.A. (2012) Investigation of viscosity of R123-TIO 2 nanorefrigerant. International Journal of Mechanical and Materials Engineering, 7 (2). pp. 146-151. ISSN 18230334,

Mahbubul, I.M. and Saidur, Rahman and Amalina, M.A. (2012) Latest developments on the viscosity of nanofluids. International Journal of Heat and Mass Transfer, 55 (4). pp. 874-885. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2011.10.021.

Mahdi, E.M. and Abd Shukor, Mohd Hamdi and Meor Yusoff, M.S. (2012) The effect of sintering on the physical and optical properties of Nano-TiO 2 synthesized via a modified hydrothermal route. Arabian Journal for Science and Engineering. pp. 1-11. ISSN 1319-8025,

Mahdiraji, G.A. and Abas, A.F. (2012) Improving the performance of electrical duty-cycle division multiplexing with optimum signal level spacing. Optics Communications, 285 (7). pp. 1819-1824. ISSN 0030-4018, DOI https://doi.org/10.1016/j.optcom.2011.12.022.

Mahdiraji, G.A. and Mohamed, A. (2012) A fuzzy expert system for classification of short duration voltage disturbances. Jurnal Teknologi, 45. pp. 41-57. ISSN 2180-3722,

Mahdiraji, Ghafour Amouzad and Abas, Ahmad Fauzi (2012) Self-Phase Modulation Effect on Performance of 40 Gbit/s Optical Duty-Cycle Division Multiplexing Technique. Journal of Optical Communications, 33 (1). pp. 43-49. ISSN 0173-4911, DOI https://doi.org/10.1515/joc-2011-0003.

Mahlia, T.M.I. and Yong, J.H. and Safari, A. and Mekhilef, Saad (2012) Techno-economic analysis of palm oil mill wastes to generate power for grid-connected utilization. Energy Education Science and Technology Part A: Energy Science and Research, 28 (2). pp. 1111-1130. ISSN 11308-772X,

Mahmodian, M.S. and Rahmani, R. and E., Taslimi and Mekhilef, Saad (2012) Step by step analyzing, modeling and simulation of single and double array PV system in different environmental variability. 2012 International Conference on Future Environment and Energy IPCBEE, 28. pp. 37-42.

Mahmoodian, R. and Rahbari, R.G. and Abd Shukor, Mohd Hamdi and Sparham, M. (2012) Another attempt to adopt a machine for SHS lining ceramics inside pipes. High Temperature Material Processes. ISSN 1093-3611, DOI https://doi.org/10.1615/.2012004708. (In Press)

Mashaan, N.S. and Ali, A.H. and Karim, M.R. and Abdelaziz, M. (2012) An overview of crumb rubber modified asphalt. International Journal of Physical Sciences, 7 (2). pp. 166-170. ISSN 19921950, DOI https://doi.org/10.5897/IJPSX11.007.

Mekhilef, Saad and Safari, A. and Chandrasegaran, D. (2012) Feasibility study of off-shore wind farms in Malaysia. Energy Education Science and Technology Part A: Energy Science and Research, 29 (1). pp. 519-530. ISSN 1308772X,

Mekhilef, Saad and Safari, Azadeh and Mustaffa, W.E.S. and Saidur, Rahman and Omar, Rosli and Younis, M.A.A. (2012) Solar energy in Malaysia: current state and prospects. Renewable and Sustainable Energy Reviews, 16 (1). pp. 386-396. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2011.08.003.

Mekhilef, Saad and Saidur, Rahman and Kamalisarvestani, Masoud (2012) Effect of dust, humidity and air velocity on efficiency of photovoltaic cells. Renewable and Sustainable Energy Reviews, 16 (5). pp. 2920-2925. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.02.012.

Mekhilef, Saad and Saidur, Rahman and Safari, Azadeh (2012) Comparative study of different fuel cell technologies. Renewable and Sustainable Energy Reviews, 16 (1). pp. 981-989. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2011.09.020.

Misran, H. and Yarmo, M.A. and Ramesh, S. (2012) Synthesis and characterization of silica nanospheres using nonsurfactant template. Ceramics International.

Moghaddam, M.R.A. and Harun, Sulaiman Wadi and Shahi, Sharifeh and Ahmad, Harith (2012) Broadband amplifier and high performance tunable laser with an extinction ratio of higher than 60 dB using bismuth oxide-based erbium-doped fiber. Journal of Modern Optics, 59 (12). pp. 1106-1112. ISSN 0950-0340, DOI https://doi.org/10.1080/09500340.2012.695806.

Mohammadhassani, M. and Jumaat, Mohd Zamin and Jameel, M. (2012) Experimental investigation to compare the modulus of rupture in high strength self compacting concrete deep beams and high strength concrete normal beams. Construction and Building Materials, 30. pp. 265-273. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2011.12.004.

Mohammadhassani, M. and Jumaat, Mohd Zamin and Jameel, M. and Badiee, H. and Arumugam, A.M.S. (2012) Ductility and performance assessment of high strength self compacting concrete (HSSCC) deep beams: an experimental investigation. Nuclear Engineering and Design, 250. pp. 116-124. ISSN 0029-5493, DOI https://doi.org/10.1016/j.nucengdes.2012.05.005.

Mohammadi, P. and Ibrahim, S. and Annuar, M.S.M. (2012) Comparative study on the effect of various pretreatment methods on the enrichment of hydrogen producing bacteria in anaerobic granulated sludge from brewery wastewater. Korean Journal of Chemical Engineering, 29 (10). pp. 1347-1351. ISSN 0256-1115, DOI https://doi.org/10.1007/s11814-012-0018-z.

Mohammadi, P. and Ibrahim, S. and Annuar, M.S.M. and Ghafari, S. and Vikineswary, S. and Zinatizadeh, A.A. (2012) Influences of environmental and operational factors on dark fermentative hydrogen production: a review. Clean-Soil Air Water, 40 (11). pp. 1297-1305. ISSN 1863-0650, DOI https://doi.org/10.1002/clen.201100007.

Mohammadi, P. and Ibrahim, S. and Mohamad Annuar, M.S. (2012) Effects of biomass, COD and bicarbonate concentrations on fermentative hydrogen production from POME by granulated sludge in a batch culture. International Journal of Hydrogen Energy, 37 (23). pp. 17801-17808. ISSN 0360-3199, DOI https://doi.org/10.1016/j.ijhydene.2012.08.110.

Mohammadjafari, M. and Ahmed, Shamsuddin and Md Dawal, Siti Zawiah and Zayandehroodi, H. (2012) The role of project manager in smes for developing new product by e-collaboration. Advanced Materials Research, 433. pp. 1637-1645. ISSN 3037853190,

Mohammadjafari Dr, M. and Ahmed, S. and Zawiah Md, S. and Zayandehroodi, H. (2012) A framework for sharing knowledge in product development by e-collaboration through project management. Research Journal of Applied Sciences, Engineering and Technology, 4 (6). pp. 649-659.

Mohammed, H.A. and Al-Aswadi, A.A. and Yusoff, M.Z. and Saidur, Rahman (2012) Buoyancy-assisted mixed convective flow over backward-facing step in a vertical duct using nanofluids. Thermophysics and Aeromechanics, 19 (1). pp. 33-52. ISSN 0869-8643, DOI https://doi.org/10.1134/s0869864312010040.

Mohammed, H.A. and Bhaskaran, G. and Shuaib, N.H. and Abu-Mulaweh, H.I. and Saidur, Rahman (2012) Thermal and hydrodynamic performance analysis of circular microchannel heat exchanger utilizing nanofluids. International Journal of Numerical Methods for Heat & Fluid Flow, 22 (7). pp. 907-927. ISSN 0961-5539, DOI https://doi.org/10.1108/09615531211255789.

Mokhlis, Hazlie and Laghari, J.A. and Bakar, A.H.A. and Karimi, M. (2012) A fuzzy Based Under-Frequency Load Shedding Scheme for islanded distribution network connected with DG. International Review of Electrical Engineering, 7 (4). pp. 4992-5000. ISSN 1827-6660,

Moo, E.K. and Herzog, W. and Han, S.K. and Abu Osman, Noor Azuan and Pingguan-Murphy, Belinda and Federico, S. (2012) Mechanical behaviour of in-situ chondrocytes subjected to different loading rates: a finite element study. Biomechanics and Modeling in Mechanobiology, 11 (7). pp. 983-993. ISSN 1617-7940,

Mook, W.T. and Chakrabarti, M.H. and Aroua, M.K. and Khan, G.M.A. and Ali, B.S. and Islam, M.S. and Abu Hassan, M.A. (2012) Removal of total ammonia nitrogen (TAN), nitrate and total organic carbon (TOC) from aquaculture wastewater using electrochemical technology: A review. Desalination, 285. pp. 1-13. ISSN 0011-9164, DOI https://doi.org/10.1016/j.desal.2011.09.029.

Mousavi, Seyyed Alireza and Ibrahim, Shaliza and Aroua, Mohamed Kheireddine (2012) Sequential nitrification and denitrification in a novel palm shell granular activated carbon twin-chamber upflow bio-electrochemical reactor for treating ammonium-rich wastewater. Bioresource Technology, 125. pp. 256-266. ISSN 0960-8524, DOI https://doi.org/10.1016/j.biortech.2012.08.075.

Mousavi, Seyyed Alireza and Ibrahim, Shaliza and Aroua, Mohamed Kheireddine and Ghafari, Shahin (2012) Development of nitrate elimination by autohydrogenotrophic bacteria in bio-electrochemical reactors - a review. Biochemical Engineering Journal, 67. pp. 251-264. ISSN 1369-703X, DOI https://doi.org/10.1016/j.bej.2012.04.016.

Muhammad, Farah Diana and Zulkifli, Mohd Zamani and Latif, Amirah Abdul and Harun, Sulaiman Wadi and Ahmad, Harith (2012) Graphene-Based Saturable Absorber for Single-Longitudinal-Mode Operation of Highly Doped Erbium-Doped Fiber Laser. IEEE Photonics Journal, 4 (2). pp. 467-475. ISSN 1943-0655, DOI https://doi.org/10.1109/JPHOT.2012.2190498.

Mukred, J.A.A. and Ibrahim, Z. and Ibrahim, I. and Adam, A. and Wan, K. and Yusof, Z.M. and Mokhtar, N. (2012) A binary particle swarm optimization approach to optimize assembly sequence planning. Advanced Science Letters, 13 (1). pp. 732-738. ISSN 19366612, DOI https://doi.org/10.1166/asl.2012.3879.

Nadia, A. and Haseeb, A.S. Md. Abdul (2012) Effects of addition of copper particles of different size to Sn-3.5Ag solder. Journal of Materials Science: Materials in Electronics, 23 (1). pp. 86-93. ISSN 0957-4522,

Naganathan, Sivakumar and Razak, Hashim Abdul and Hamid, Siti Nadzriah Abdul (2012) Properties of controlled low-strength material made using industrial waste incineration bottom ash and quarry dust. Materials & Design, 33 (1). pp. 56-63. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.07.014.

Narmashiri, K. and Ramli Sulong, Nor Hafizah and Jumaat, Mohd Zamin (2012) Failure analysis and structural behaviour of CFRP strengthened steel I-beams. Construction and Building Materials, 30. pp. 1-9. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2011.11.009.

Narmashiri, Kambiz and Jumaat, Mohd Zamin and Ramli Sulong, Nor Hafizah (2012) Strengthening of steel I-beams using CFRP strips: an investigation on CFRP bond length. Advances in Structural Engineering, 15 (12). pp. 2191-2204. ISSN 1369-4332, DOI https://doi.org/10.1260/1369-4332.15.12.2191.

Ng, H.S. and Tan, C.P. and Mokhtar, M.N. and Ibrahim, S. and Ariff, A. and Ooi, C.W. and Ling, T.C. (2012) Recovery of Bacillus cereus cyclodextrin glycosyltransferase and recycling of phase components in an aqueous two-phase system using thermo-separating polymer. Separation and Purification Technology, 89. pp. 9-15. ISSN 1383-5866, DOI https://doi.org/10.1016/j.seppur.2011.12.028.

Nik Pa, Nik Masmiati and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2012) Optimizing the cutting parameters for better surface quality in 2.5 D cutting utilizing titanium coated carbide ball end mill. International Journal of Precision Engineering and Manufacturing, 13 (12). pp. 2097-2102. ISSN 2234-7593,

Ong, Y.H. and Chua, A.S. and Lee, B.P. and Ngoh, G.C. and Hashim, M.A. (2012) An observation on sludge granulation in an enhanced biological phosphorus removal process. Water Environment Research, 84 (1). pp. 3-8. DOI PMID: 22368821.

Oshkour, A. and Abu Osman, Noor Azuan and Yau, Y. and Tarlochan, F. and Wan Abas, Wan Abu Bakar (2012) Design of new generation femoral prostheses using functionally graded materials: a finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. ISSN 0954-4119,

Othman, R. and Binh, D.N. and Ismail, A.B. and Long, B.D. and Ariga, T. (2012) Effects of current density on the formation and microstructure of Sn–9Zn, Sn–8Zn–3Bi and Sn–3Ag–0.5Cu solder joints. Intermetallics, 22. pp. 1-6. ISSN 0966-9795, DOI https://doi.org/10.1016/j.intermet.2011.10.011.

Parvizi, R. and Harun, Sulaiman Wadi and Ali, N.M. and Arof, Hamzah and Ahmad, Harith (2012) Investigation on threshold power of stimulated Brillouin scattering in photonic crystal fiber. Optik, 123. pp. 1149-1152. ISSN 0030-4026,

Parvizi, Roghaieh and Ali, Norfizah Md and Harun, Sulaiman Wadi and Emami, Siamak Dawazdah and Ahmad, Harith (2012) Multi-wavelength Brillouin fiber laser generation using dual-pass approach. Laser Physics, 22 (3). pp. 584-587. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X12030152.

Pramanik, Sumit and Pingguan-Murphy, Belinda and Abu Osman, Noor Azuan (2012) Progress of key strategies in development of electrospun scaffolds: bone tissue. Science and Technology of Advanced Materials, 13 (4). 043002. ISSN 1468-6996,

Pua, Chang Hong and Ahmad, Harith and Harun, Sulaiman Wadi and De La Rue, Richard M. (2012) Direct airborne acoustic wave modulation of Fabry–Perot fiber laser (FPFL) over 100 kHz of operating bandwidth. Applied Optics, 51 (15). p. 2772. ISSN 1559-128X, DOI https://doi.org/10.1364/AO.51.002772.

Rahim, N.A. and Saidur, Rahman and Solangi, K.H. and Othman, M. and Amin, N. (2012) Survey of grid-connected photovoltaic inverters and related systems. Clean Technologies and Environmental Policy, 14 (4). pp. 521-533. ISSN 1618-954X, DOI https://doi.org/10.1007/s10098-011-0411-z.

Rahman, Husna Abdul and Che Ani, Adi Izhar and Harun, Sulaiman Wadi and Yasin, Moh and Apsari, Retna and Ahmad, Harith (2012) Feasibility of fiber optic displacement sensor scanning system for imaging of dental cavity. Journal of Biomedical Optics, 17 (7). 071308. ISSN 1083-3668, DOI https://doi.org/10.1117/1.JBO.17.7.071308.

Rahman, Husna Abdul and Harun, Sulaiman Wadi and Saidin, Norazlina and Yasin, Moh and Ahmad, Harith (2012) Fiber Optic Displacement Sensor for Temperature Measurement. IEEE Sensors Journal, 12 (5). pp. 1361-1364. ISSN 1530-437X, DOI https://doi.org/10.1109/JSEN.2011.2172409.

Rahman, Husna Abdul and Harun, Sulaiman Wadi and Yasin, Moh and Ahmad, Harith (2012) Fiber-Optic Salinity Sensor Using Fiber-Optic Displacement Measurement With Flat and Concave Mirror. IEEE Journal of Selected Topics in Quantum Electronics, 18 (5). pp. 1529-1533. ISSN 1077-260X, DOI https://doi.org/10.1109/JSTQE.2011.2159705.

Rahman, M.M. and Billah, M.M. and Hasanuzzaman, M. and Saidur, Rahman and Rahim, N.A. (2012) Heat transfer enhancement of nanofluids in a Lid-Driven square enclosure. Numerical Heat Transfer, Part A: Applications, 62 (12). pp. 973-991. ISSN 1521-0634, DOI https://doi.org/10.1080/10407782.2012.715983.

Rahman, M.M. and Billah, M.M. and Rahim, N.A. and Saidur, Rahman and Hasanuzzaman, M. (2012) Finite element simulation of magnetohydrodynamic mixed convection in a double-lid driven enclosure with a square heat-generating block. Journal of Heat Transfer-Transactions of the Asme, 134 (6). 0022-1481. ISSN 0022-1481, DOI https://doi.org/10.1115/1.4006010.

Rahman, M.M. and Oztop, H.F. and Rahim, N.A. and Saidur, Rahman and Al-Salem, K. and Amin, N. and Mamun, M.A.H. and Ahsan, A. (2012) Computational analysis of mixed convection in a channel with a cavity heated from different sides. International Communications in Heat and Mass Transfer, 39 (1). pp. 78-84. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2011.09.006.

Rahman, M.M. and Parvin, S. and Rahim, N.A. and Islam, M.R. and Saidur, Rahman and Hasanuzzaman, M. (2012) Effects of Reynolds and Prandtl number on mixed convection in a ventilated cavity with a heat-generating solid circular block. Applied Mathematical Modelling, 36 (5). pp. 2056-2066. ISSN 0307-904X, DOI https://doi.org/10.1016/j.apm.2011.08.014.

Rahman, M.M. and Parvin, S. and Rahim, Nasrudin Abd and Hasanuzzaman, Md. and Saidur, Rahman (2012) Simulation of mixed convection heat transfer in a horizontal channel with an open cavity containing a heated hollow cylinder. Heat Transfer - Asian Research, 41 (4). pp. 339-353. ISSN 1099-2871, DOI https://doi.org/10.1002/htj.21002.

Rahman, Mohammad Shafiur and Rashid, M.M. and Hussain, Mohd Azlan (2012) Thermal conductivity prediction of foods by Neural Network and Fuzzy (ANFIS) modeling techniques. Food and Bioproducts Processing, 90 (2). pp. 333-340. ISSN 0960-3085, DOI https://doi.org/10.1016/j.fbp.2011.07.001.

Rahman, N.A. and Hussain, Mohd Azlan and Jahim, J.M. (2012) Production of fructose using recycle fixed-bed reactor and batch bioreactor. Journal of Food Agriculture & Environment, 10 (2). pp. 268-273. ISSN 1459-0255,

Ramesh, S. and Aw, K.L. and Tolouei, R. and Amiriyan, M. and Tan, C.Y. and Hamdi, M. and Purbolaksonoa, J. and Hassan, Mohamed Mohsen Abdel-Naeim and Teng, W.D. (2012) Sintering properties of hydroxyapatite powders prepared using different methods. Ceramics International. ISSN 0272-8842,

Ramesh, Singh and Purbolaksono, J. and Hamdi, M. and Sopyan, I. and Tolouei, R. and Amiriyan, M. and Tarlochan, F. and Teng, W.D. (2012) Low-temperature degradation (LTD) behaviour of CuO-Doped tetragonal zirconia ceramic. Ceramics-Silikáty, 56 (1). pp. 15-19. ISSN 0862-5468,

Ramesh, Singh and Tan, C.Y. and Tolouei, R. and Amiriyan, M. and Purbolaksono, J. and Sopyan, I. and Teng, W.D. (2012) Sintering behavior of hydroxyapatite prepared from different routes. Materials & Design, 34. pp. 148-154. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.08.011.

Razavi, S.V. and Jumaat, Mohd Zamin and Ahmed, E.S.H. and Mohammadi, P. (2012) Using generalized regression neural network (GRNN) for mechanical strength prediction of lightweight mortar. Computers and Concrete, 10 (4). pp. 379-390. ISSN 15988198,

Razman, R. and Cheong, J.P.G. and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan (2012) Anthropometric and strength characteristics of tenpin bowlers with different playing abilities. Biology of Sport, 29 (1). pp. 33-38. ISSN 10.5604/20831862.979853,

Rismanchi, Behzad and Saidur, Rahman and Boroumandjazi, G. and Ahmed, Shamsuddin (2012) Energy, exergy and environmental analysis of cold thermal energy storage (CTES) systems. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5741-5746. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.06.002.

Rismanchi, Behzad and Saidur, Rahman and Masjuki, Haji Hassan and Mahlia, Teuku Meurah Indra (2012) Energetic, economic and environmental benefits of utilizing the ice thermal storage systems for office building applications. Energy and Buildings, 50. pp. 347-354. ISSN 0378-7788, DOI https://doi.org/10.1016/j.enbuild.2012.04.001.

Rismanchi, Behzad and Saidur, Rahman and Masjuki, Haji Hassan and Mahlia, Teuku Meurah Indra (2012) Thermodynamic evaluation of utilizing different ice thermal energy storage systems for cooling application in office buildings in Malaysia. Energy and Buildings, 53. pp. 117-126. ISSN 0378-7788, DOI https://doi.org/10.1016/j.enbuild.2012.06.013.

Roslin, Eida Nadirah and Ahmed, Shamsuddin and Md Dawal, Siti Zawiah and Tamri, Norjamalullail (2012) Strategies for the successful lean manufacturing implementation: a case study in a Malaysian automotive parts manufacturing. International Journal of Engineering Research and Technology, 1 (9). pp. 1-6. ISSN 2278-0181,

Sadollah, Ali and Bahreininejad, A. and Eskandar, Hadi and Abd Shukor, Mohd Hamdi (2012) Mine blast algorithm for optimization of truss structures with discrete variables. Computers & Structures, 102. pp. 49-63. ISSN 0045-7949,

Safee, M.K.M. and Wan Abas, Wan Abu Bakar and Ibrahim, Fatimah and Abu Osman, Noor Azuan and Salahuddin, M.H.R. (2012) Electromyographic activity of the lower limb muscles during salat and specific exercises. Journal of Physical Therapy Science, 24 (6). pp. 549-552. ISSN 0915-5287,

Safiuddin, M. and Jumaat, Mohd Zamin and Salam, M.A. (2012) Flowing ability of self-consolidating concrete and its binder paste phase including palm oil fuel ash. Magazine of Concrete Research, 64 (10). pp. 931-944. ISSN 0024-9831, DOI https://doi.org/10.1680/macr.11.00135.

Safiuddin, M. and Rahman, M.M. and Salam, M.A. and Md.Isa, M.H. and Jumaat, Mohd Zamin (2012) Properties of self-consolidating palm oil fuel ash concrete. Advanced Science Letters, 17 (1). pp. 312-319. ISSN 19366612, DOI https://doi.org/10.1166/asl.2012.4268.

Saidur, R. and Sambandam, M.T. and Hasanuzzaman, M. and Devaraj, D. and Rajakarunakaran, S. and Islam, M.D. (2012) An energy flow analysis in a paper-based industry. Clean Technologies and Environmental Policy, 14 (5). pp. 905-916. ISSN 1618954X, DOI https://doi.org/10.1007/s10098-012-0462-9.

Saidur, Rahman (2012) MHD natural convection in an enclosure from two semi-circular heaters on the bottom wall. International Journal of Heat and Mass Transfer, 55 (7-8). pp. 1844-1854. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2011.11.037.

Saidur, Rahman and BoroumandJazi, G. and Mekhilef, Saad and Jameel, Mohammed (2012) Exergy analysis of solar energy applications. Renewable and Sustainable Energy Reviews, 16 (1). pp. 350-356. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2011.07.162.

Saidur, Rahman and Boroumandjazi, G. and Mekhilef, Saad and Mohammed, H.A. (2012) A review on exergy analysis of biomass based fuels. Renewable and Sustainable Energy Reviews, 16 (2). pp. 1217-1222. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2011.07.076.

Saidur, Rahman and Hasanuzzaman, M. and Rahim, N.A. (2012) Energy, economic, and environmental analysis of the Malaysian industrial compressed-air systems. Clean Technologies and Environmental Policy, 14 (2). pp. 195-210. ISSN 1618-954X, DOI https://doi.org/10.1007/s10098-011-0386-9.

Saidur, Rahman and Mekhilef, Saad and Ali, Mansouri B. and Safari, Azadeh and Mohammed, Hussein A. (2012) Applications of variable speed drive (VSD) in electrical motors energy savings. Renewable and Sustainable Energy Reviews, 16 (1). pp. 543-550. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2011.08.020.

Saidur, Rahman and Meng, T.C. and Said, Z. and Hasanuzzaman, M. and Kamyar, A. (2012) Evaluation of the effect of nanofluid-based absorbers on direct solar collector. International Journal of Heat and Mass Transfer, 55 (21-22). pp. 5899-5907. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2012.05.087.

Saidur, Rahman and Rezaei, Mahdi and Muzammil, Wan Khairul and Masjuki, Haji Hassan and Paria, Saman and Hasanuzzaman, Md. (2012) Technologies to recover exhaust heat from internal combustion engines. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5649-5659. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.05.018.

Saidur, Rahman and Sambandam, M.T. and Hasanuzzaman, M. and Devaraj, D. and Rajakarunakaran, S. (2012) An analysis of actual energy savings in an indian cement industry through an energy efficiency index. International Journal of Green Energy, 9 (8). pp. 829-840. ISSN 1543-5075, DOI https://doi.org/10.1080/15435075.2011.647166.

Sajadi, A. and Sebtahmadi, S.S. and Koniaka, M. and Biczel, P. and Mekhilef, Saad (2012) Distributed control scheme for voltage regulation in smart grids. International Journal of Smart Grid and Clean Energy. ISSN 2315-4462,

Sajedi, F. and Razak, Hashim Abdul and Mahmud, H.B. and Shafigh, P. (2012) Relationships between compressive strength of cement-slag mortars under air and water curing regimes. Construction and Building Materials, 31. pp. 188-196. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2011.12.056.

Sajjadi, B. and Abdul Raman, Abdul Aziz and Ibrahim, Shaliza and Shah, R.S.S.R.E. (2012) Review on gas-liquid mixing analysis in multiscale stirred vessel using CFD. Reviews in Chemical Engineering, 28 (2-3). pp. 171-189. ISSN 0167-8299, DOI https://doi.org/10.1515/revce-2012-0003.

Salbiah, S. and Somaya, A. and Arof, Hamzah and Saleh, Z.S. and Ibrahim, Fatimah (2012) A new approach to medical image stitching using minimum average correlation energy filter and peak to side-lobe ratio. International Journal of Imaging Systems and Technology, 22 (3). pp. 166-171. ISSN 0899-9457, DOI https://doi.org/10.1002/Ima.22018.

Saleem, Muhammad and Chakrabarti, Mohammed Harun and Hasan, Diya'uddeen Basheer and Islam, Md. Sakinul and Yusoff, Rozita and Hajimolana, Sayed Ahmad and Hussain, Mohd Azlan and Khan, G.M.A. and Ali, Brahim Si (2012) On site electrochemical production of sodium hypochlorite disinfectant for a power plant utilizing seawater. International Journal of Electrochemical Science, 7 (5). pp. 3929-3938. ISSN 1452-3981,

Saleem, Muhammad and Essa, M.H. and Chakrabarti, Mohammed Harun and Low, C.T.J. and Hajimolana, S.A. and Hussain, Mohd Azlan and Hashim, M.A. and Islam, M.S. (2012) An economical means for remediating a multiple-metal contaminated soil using electro-kinetic technology under natural conditions. International Journal of Electrochemical Science, 7 (9). pp. 7809-7822. ISSN 1452-3981,

Samsudin, S. and Adwan, S. and Arof, Hamzah and Mokhtar, Norrima and Ibrahim, F. (2012) Development of automated image stitching system for radiographic images. Journal of Digital Imaging, 26 (2). pp. 361-70. ISSN 0897-1889, DOI https://doi.org/10.1007/s10278-012-9483-5.

Sandu, V. and Ching, Yern Chee (2012) On the scaling law of the pinning force in MgB 2 superconducting composites with magnetic nanoinclusions. Journal of Superconductivity and Novel Magnetism. pp. 1-7. ISSN 1557-1939,

Sarhan, Ahmed Aly Diaa Mohammed and Sayuti, Mohd and Abd Shukor, Mohd Hamdi (2012) Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system. The International Journal of Advanced Manufacturing Technology, 63 (5-8). pp. 505-512. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-012-3940-7.

Sarhan, Ahmed Aly Diaa Mohammed and Zalnezhad, E. and Hamdi, M. (2012) The influence of higher surface hardness on fretting fatigue life of hard anodized aerospace AL7075-T6 alloy. Materials Science and Engineering: A. ISSN 0921-5093,

Sarmani, A.R. and Abu Bakar, M.H. and Adikan, Faisal Rafiq Mahamd and Mahdi, M.A. (2012) Laser parameter variations in a rayleigh scattering-based raman fiber laser with single fiber bragg grating reflector. IEEE Photonics Journal, 4 (2). pp. 461-466. ISSN 1943-0655,

Sayuti, M. and Sarhan, A.A.D. and Tanaka, T. and Abd Shukor, Mohd Hamdi and Saito, Y. (2012) Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system. The International Journal of Advanced Manufacturing Technology. pp. 1-8. ISSN 0268-3768,

Sayuti, M. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2012) An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy. The International Journal of Advanced Manufacturing Technology. pp. 1-17. ISSN 0268-3768,

Sayuti, Mohd and Sarhan, Ahmed Aly Diaa Mohammed and Fadzil, M. and Abd Shukor, Mohd Hamdi (2012) Enhancement and verification of a machined surface quality for glass milling operation using CBN grinding tool-Taguchi approach. The International Journal of Advanced Manufacturing Technology, 60 (9-12). pp. 939-950. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-011-3657-z.

Shafigh, P. and Jumaat, Mohd Zamin and Bin Mahmud, H. and Hamid, N.A.A. (2012) Lightweight concrete made from crushed oil palm shell: tensile strength and effect of initial curing on compressive strength. Construction and Building Materials, 27 (1). pp. 252-258. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2011.07.051.

Shafigh, P. and Jumaat, Mohd Zamin and Mahmud, H.B. (2012) Effect of replacement of normal weight coarse aggregate with oil palm shell on properties of concrete. Arabian Journal for Science and Engineering, 37 (4). pp. 955-964. ISSN 13198025, DOI https://doi.org/10.1007/s13369-012-0233-2.

Shafigh, Payam and Mahmud, Hilmi and Jumaat, Mohd Zamin (2012) Oil palm shell lightweight concrete as a ductile material. Materials & Design, 36. pp. 650-654. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.12.003.

Shahabuddin, N.S. and Awang, N.A. and Ahmad, Harith and Arof, Hamzah and Dimyati, K. and Yusoff, Z. and Harun, Sulaiman Wadi (2012) Supercontinuum generation using a passive mode-locked stretched-pulse bismuth-based erbium-doped fiber laser. Optics & Laser Technology, 44. pp. 741-743. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2011.11.039.

Shahabuddin, Nurul Shahrizan and Ahmad, Harith and Yusoff, Zulfadzli and Harun, Sulaiman Wadi (2012) Spacing-Switchable Multiwavelength Fiber Laser Based on Nonlinear Polarization Rotation and Brillouin Scattering in Photonic Crystal Fiber. IEEE Photonics Journal, 4 (1). pp. 34-38. ISSN 1943-0655, DOI https://doi.org/10.1109/JPHOT.2011.2178400.

Shahabuddin, Nurul Shahrizan and Ismail, Mohd Afiq and Paul, Mukul Chandra and Damanhuri, Siti Sarah Ahmad and Harun, Sulaiman Wadi and Ahmad, Harith and Pal, Mrinmay and Bhadra, Shyamal Kumar (2012) Multi-wavelength ytterbium doped fiber laser based on longitudinal mode interference. Laser Physics, 22 (1). pp. 252-255. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X12010173.

Shahabuddin, Nurul Shahrizan and Mohamad, Hafizah and Mahdi, Mohd Adzir and Yusoff, Zulfadzli and Ahmad, Harith and Harun, Sulaiman Wadi (2012) Broad spectral sliced multiwavelength source with a mode locked fiber laser. Laser Physics, 22 (1). pp. 212-215. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X11230162.

Shahabuddin, Nurul Shahrizan and Mohamad, Hafizah and Mahdi, Mohd Adzir and Yusoff, Zulfadzli and Ahmad, Harith and Harun, Sulaiman Wadi (2012) Passively mode-locked soliton fiber laser using a combination of saturable absorber and nonlinear polarization rotation technique. Microwave and Optical Technology Letters, 54 (6). pp. 1430-1432. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.26850.

Shahla, S. and Ngoh, G.C. and Yusoff, R. (2012) The evaluation of various kinetic models for base-catalyzed ethanolysis of palm oil. Bioresource Technology, 104. pp. 1-5. ISSN 0960-8524, DOI https://doi.org/10.1016/j.biortech.2011.11.010.

Shahla, S. and Ngoh, G.C. and Yusoff, Rozita (2012) Optimization of base-catalyzed ethyl ester production from palm oil. Asia-Pacific Journal of Chemical Engineering, 7. S20-S25. ISSN 1932-2135, DOI https://doi.org/10.1002/apj.622.

Shahriari, A. and Mokhlis, Hazlie and Bakar, A.H.A. (2012) Critical reviews of Load flow methods for well, ill and unsolvable condition. Journal of Electrical Engineering-Elektrotechnicky Casopis, 63 (3). pp. 144-152. ISSN 1335-3632, DOI https://doi.org/10.2478/v10187-012-0022-.

Shahriari, A. and Mokhlis, Hazlie and Bakar, A.H.A. and Karimi, M. and Aman, M.M. (2012) The non-divergence Newton-based Load Flow Method in ill conditioned system. International Journal of Scientific & Engineering Research, 3 (6). pp. 1-6. ISSN 2229-5518,

Shahriari, Amidaddin and Mokhlis, Hazlie and Bakar, Ab Halim Abu and Karimi, Mazaher and Illias, Hazlee Azil (2012) Application of state space search method to find a low voltage solution for ill-conditioned system. Przeglad Elektrotechniczny, 88 (12 A). pp. 247-250. ISSN 0033-2097,

Shamiri, A. and Hussain, Mohd Azlan and Mjalli, F.S. and Mostoufi, N. (2012) Improved single phase modeling of propylene polymerization in a fluidized bed reactor. Computers & Chemical Engineering, 36 (1). pp. 35-47. ISSN 0098-1354, DOI https://doi.org/10.1016/j.compchemeng.2011.07.015.

Shee, Y.G. and Al-Mansoori, M.H. and Yaakob, S. and Man, A. and Zamzuri, A.K. and Adikan, Faisal Rafiq Mahamd and Mahdi, M.A. (2012) Millimeter wave carrier generation based on a double-Brillouin-frequency spaced fiber laser. Optics Express, 20 (12). pp. 13402-13408. ISSN 1094-4087,

Shekarchian, M. and Moghavvemi, Mahmoud and Motasemi, F. and Zarifi, F. and Mahlia, T.M.I. (2012) Energy and fuel consumption forecast by retrofitting absorption cooling in Malaysia from 2012 to 2025. Renewable and Sustainable Energy Reviews, 16 (8). 6128-6141. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.07.013.

Shekarchian, M. and Moghavvemi, Mahmoud and Rismanchi, B. and Mahlia, T.M.I. and Olofsson, T. (2012) The cost benefit analysis and potential emission reduction evaluation of applying wall insulation for buildings in Malaysia. Renewable and Sustainable Energy Reviews, 16 (7). pp. 4708-4718. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.04.045.

Sopyan, I. and Mardziah, C.M. and Ramesh, S. (2012) Fabrication of porous ceramic scaffolds via polymeric sponge method using sol-gel derived strontium doped hydroxyapatite. Applied Mechanics and Materials, 117-11. pp. 829-832. ISSN 3037852801,

Sulaiman, A. and Harun, Sulaiman Wadi and Ahmad, F. and Arof, Hamzah and Ahmad, Harith (2012) Dual-wavelength laser generation using highly concentrated erbium-doped fibre coupling with microfibre knot resonator. Electronics Letters, 48 (5). ISSN 0013-5194,

Sulaiman, A. and Harun, Sulaiman Wadi and Arof, Hamzah and Ahmad, Harith (2012) Compact and tunable Erbium-Doped fiber laser with microfiber Mach–Zehnder interferometer. IEEE Journal of Quantum Electronics, 48 (9). ISSN 0018-9197,

Sulaiman, Azlan and Harun, Sulaiman Wadi and Ahmad, Fauzan and Norizan, Siti Fatimah and Ahmad, Harith (2012) Electrically Tunable Microfiber Knot Resonator Based Erbium-Doped Fiber Laser. IEEE Journal of Quantum Electronics, 48 (4). pp. 443-446. ISSN 0018-9197, DOI https://doi.org/10.1109/JQE.2012.2184525.

Sulaiman, Azlan and Harun, Sulaiman Wadi and Ahmad, Fauzan and Norizan, Siti Fatimah and Ahmad, Harith (2012) Tunable laser generation with erbium-doped microfiber knot resonator. Laser Physics, 22 (3). pp. 588-591. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X12030218.

Sulaiman, Azlan and Harun, Sulaiman Wadi and Ahmad, Harith (2012) Erbium-Doped Fiber Laser With a Microfiber Coupled to Silica Microsphere. IEEE Photonics Journal, 4 (4). pp. 1065-1070. ISSN 1943-0655, DOI https://doi.org/10.1109/JPHOT.2012.2204238.

Sulaiman, Azlan and Harun, Sulaiman Wadi and Aryanfar, Iman and Ahmad, Harith (2012) DC current sensing capability of microfibre Mach-Zehnder interferometer. Electronics Letters, 48 (15). pp. 943-945. ISSN 0013-5194, DOI https://doi.org/10.1049/el.2012.1435.

Sulaiman, Azlan and Harun, Sulaiman Wadi and Lim, Kok Sing and Ahmad, Fauzan and Ahmad, Harith (2012) Microfiber Mach-Zehnder interferometer embedded in low index polymer. Optics & Laser Technology, 44 (4). pp. 1186-1189. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2011.09.032.

Tajul Baharuddin, M.F. and Othman, A.R. and Taib, S. and Hashim, Roslan and Zainal Abidin, M.H. and Radzuan, M.A. (2012) Evaluating freshwater lens morphology affected by seawater intrusion using chemistry-resistivity integrated technique: a case study of two different land covers in Carey Island, Malaysia. Environmental Earth Sciences, 69. pp. 1-19. ISSN 1866-6280, DOI https://doi.org/10.1007/s12665-012-2098-9.

Tan, Kim Han and Johan, Mohd Rafie and Ahmad, Roslina and Kadri, Nahrizul Adib and Zain, Norita Mohd and Arof, Abdul Kariem (2012) Mechanical analysis of the effects of different mechanical alloying periods on Ni3Al intermetallic compound fabrication quality. International Journal of Electrochemical Science, 7 (4). pp. 3765-3772. ISSN 1452-3981,

Tan, S.J. and Harun, Sulaiman Wadi and Shahabuddin, N.S. and Arof, Hamzah and Ahmad, Harith (2012) Dual-cavity dual-output multi-wavelength fiber laser based on nonlinear polarization rotation effect. Laser Physics, 22 (10). pp. 1601-1605. ISSN 1054-660X,

Tan, S.J. and Ismail, M.A. and Shahabuddin, N.S. and Ahmad, Harith and Arof, Hamzah and Harun, Sulaiman Wadi (2012) Effect of doped fiber length on the stretch pulses of a mode-locked erbium-doped fiber laser. Laser Physics, 22 (7). pp. 1240-1243. ISSN 1054-660X,

Tarlochan, F. and Ramesh, S. and Harpreet, S. (2012) Advanced composite sandwich structure design for energy absorption applications: blast protection and crashworthiness. Composites Part B: Engineering, 48 (5). pp. 2198-2208. ISSN 1359-8368,

Tee, D.C. and Kambayashi, T. and Sandoghchi, S.R. and Tamchek, N. and Adikan, Faisal Rafiq Mahamd (2012) Efficient, wide angle, structure tuned 1 x 3 photonic crystal power splitter at 1550 nm for triple play applications. Journal of Lightwave Technology, 30 (17). pp. 2818-2823. ISSN 0733-8724,

Ting, H.N. and Chia, S.Y. and Manap, H.H. and Ho, A.H. and Tiu, K.Y. and Abdul Hamid, B. (2012) Fundamental frequency and perturbation measures of sustained vowels in Malaysian Malay children between 7 and 12 years old. The Journal of Voice. ISSN 0892-1997, DOI PMID: 22243972.

Ting, H.N. and Zourmand, A. and Chia, S.Y. and Yong, B.F. and Abdul Hamid, B. (2012) Formant frequencies of Malay vowels produced by Malay children aged between 7 and 12 years. The Journal of Voice. ISSN 0892-1997, DOI PMID: 22285457.

Uddin, M.A. and Jameel, M. and Razak, H.A. and Saiful Islam, A.B.M. (2012) Response prediction of offshore floating structure using artificial neural network. Advanced Science Letters, 14 (1). pp. 186-189. ISSN 19367317, DOI https://doi.org/10.1166/asl.2012.4049.

Uddin, Md and Jameel, Mohammed and Sobuz, Habibur Rahman and Hasan, Noor Md and Islam, Md and Amanat, Khan Mahmud (2012) The effect of curing time on compressive strength of composite cement concrete. Applied Mechanics and Materials, 204. pp. 4105-4109. ISSN 3037854847,

Usman, J. and McIntosh, A.S. (2012) Upper limb injury in rugby union football: results of a cohort study. British Journal of Sports Medicine. ISSN 1473-0480 (Electronic) 0306-3674 (Linking),

Wan, K. and Aziz, A.A. and Ab, Shahriman and Zaaba, Siti Khadijah and Ibrahim, Zuwairie and Yusof, Zulkifli Md. and Ibrahim, Ismail and Mukred, Jameel Abdulla Ahmed and Mokhtar, Norrima (2012) Probability distribution of arm trajectory for motion estimation and gesture recognition. Advanced Science Letters, 13 (1). pp. 534-539. ISSN 19366612, DOI https://doi.org/10.1166/asl.2012.3953.

Wazed, M.A. and Ahmed, S. and Nukman, Y. and Ale Ebrahim, N. (2012) Models for component commonality in multistage production. Applied Mechanics and Materials, 110-11. pp. 258-266.

Wee, W.H. and Razak, M.A.A. and Kadri, Nahrizul Adib (2012) Electrochemical cell entrapment device for BioMEMS applications using benchtop fabrication techniques. International Journal of Electrochemical Science, 7 (11). pp. 11588-11595. ISSN 1452-3981,

Wee, Wei Hong and Razak, Mohd Azhar Abdul and Kadri, Nahrizul Adib (2012) Dielectrophoretic K562 cell entrapment device using benchtop microfluidics fabrication. Advanced Science Letters, 15 (1). pp. 1-4. ISSN 1936-6612,

Wong, Y.H. and Cheong, K.Y. (2012) Effects of oxidation and nitridation temperatures on electrical properties of sputtered Zr thin film based on Si in N2O ambient. Electronic Materials Letters, 8 (1). pp. 47-51. ISSN 1738-8090, DOI https://doi.org/10.1007/s13391-011-1067-x.

Wong, Y.H. and Cheong, K.Y. (2012) Formation of Zr- oxynitride thin films on 4H-SiC substrate. Thin Solid Films, 520 (22). pp. 6822-6829. ISSN 0040-6090, DOI https://doi.org/10.1016/j.tsf.2012.07.036.

Wong, Y.H. and Cheong, K.Y. (2012) Properties of thermally oxidized and nitrided Zr-oxynitride thin film on 4H–SiC in diluted N2O ambient. Materials Chemistry and Physics, 136 (2-3). pp. 624-637. ISSN 0254-0584, DOI https://doi.org/10.1016/j.matchemphys.2012.07.035.

Wong, Yew Hoong and Cheong, K.Y. (2012) Metal-Oxide-Semiconductor Characteristics of Zr-Oxynitride Thin Film on 4H-SiC Substrate. Journal of The Electrochemical Society, 159 (3). H293-H299. ISSN 0013-4651, DOI https://doi.org/10.1149/2.081203jes .

Yafouz, Bashar and Kadri, Nahrizul Adib and Ibrahim, Fatimah (2012) The design and simulation of a planar microarray dot electrode for a dielectrophoretic lab-on-chip device. International Journal of Electrochemical Science, 7 (12). pp. 12054-12063. ISSN 1452-3981,

Yahya, S. and Moghavvemi, M. and Almurib, H.A.F. (2012) Joint torque reduction of a three dimensional redundant planar manipulator. Sensors (Switzerland), 12 (6). pp. 6869-6892. ISSN 14248220, DOI https://doi.org/10.3390/s120606869.

Yahya, S. and Moghavvemi, M. and Mohamed, H.A.F. (2012) Singularity avoidance of a six degree of freedom three dimensional redundant planar manipulator. Computers and Mathematics with Applications, 64 (5). pp. 856-868. ISSN 08981221, DOI https://doi.org/10.1016/j.camwa.2011.12.073.

Yap, Yuen Kiat and De La Rue, Richard Michael and Pua, Chang Hong and Harun, Sulaiman Wadi and Ahmad, Harith (2012) Graphene-based Q-switched pulsed fiber laser in a linear configuration. Chinese Optics Letters, 10 (4). 041405-41408. ISSN 1671-7694, DOI https://doi.org/10.3788/COL201210.041405.

Yasin, Moh and Rahman, Husna Abdul and Bidin, Noriah and Harun, Sulaiman Wadi and Ahmad, Harith (2012) Fiber optic displacement sensor using fiber coupler probe and real objects. Sensor Review, 32 (3). pp. 212-216. ISSN 0260-2288, DOI https://doi.org/10.1108/02602281211233197.

Yazid, H. and Arof, Hamzah and Mohd Isa, H. (2012) Automated identification of exudates and optic disc based on inverse surface thresholding. Journal of Medical Systems, 36. pp. 1997-2004. ISSN 0148-5598,

Yazid, Haniza and Arof, Hamzah and Mohd Isa, Hazlita (2012) Exudates segmentation using inverse surface adaptive thresholding. Measurement, 45. pp. 1599-1608. ISSN 0263-2241,

Yazid, Haniza and Arof, Hamzah and Yazid, Hafizal (2012) Automated thresholding in radiographic image for welded joints. Nondestructive Testing and Evaluation, 27 (1). pp. 69-80. ISSN 1058-9759, DOI https://doi.org/10.1080/10589759.2011.591795.

Yusof, Farazila and Yukio, Miyashita and Yoshiharu, Mutoh and Abd Shukor, Mohd Hamdi (2012) Effect of anodizing on pulsed Nd: YAG laser joining of polyethylene terephthalate (PET) and aluminium alloy (A5052). Materials & Design, 37. pp. 410-415. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2012.01.006.

Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2012) Prediction of TiN coating adhesion strength on aerospace AL7075-T6 alloy using fuzzy rule based system. International Journal of Precision Engineering and Manufacturing, 13 (8). pp. 1453-1459. ISSN 1229-8557,

Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2012) Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy. Materials Science and Engineering: A. ISSN 0921-5093,

Zargar, M. and Ahmadinia, E. and Asli, H. and Karim, M.R. (2012) Investigation of the possibility of using waste cooking oil as a rejuvenating agent for aged bitumen. Journal of Hazardous Materials, 233-23. pp. 254-258. ISSN 0304-3894, DOI https://doi.org/10.1016/j.jhazmat.2012.06.021.

Zuhdi, A.S.M. and Ismail, M.D. and Undok, A.W. and Abidin, I.Z. and Naser, M.N.M. and Yaakob, Z.H. and Singh, R. and Singh, R. and Nordin, A.J. and Ahmad, W.A.W. (2012) Extracorporeal shockwave myocardial reperfusion (ESMR) therapy improves left ventricular dyssynchrony. Circulation, 125 (19). E747-E747.

Conference or Workshop Item

Aeinehvand, Mohammad Mahdi and Moebius, Jacob and Harun, Sulaiman Wadi and Abd Rahman, Noorsaadah and Madou, Marc and Ibrahim, Fatimah (2012) The effects of placement and geometry on thermo-pneumatic pumping on centrifugal microfluidic compact disc (CD) platforms. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Ahmad, S. and Wei, H.L. and Roslan, H. (2012) Site selection for the tidal current turbine (TCT)in the Straits of Malacca. In: 2nd Conference for Regional Cooperation in Ocean and Earth Science Research in the South China Sea, 21-24 October 2012, University of Malaya, Kuala Lumpur, Malaysia.

Al-Dabbagh, R.D. and Baba, M.S. and Mekhilef, Saad and Kinsheel, A. (2012) The compact genetic algorithm for likelihood estimator of first order moving average model. In: 2012 2nd International Conference on Digital Information and Communication Technology and its Applications, DICTAP 2012, Bangkok.

Ali, M.S. and Abu Bakar, A.H. and Mokhlis, Hazlie and Arof, Hamzah and Illias, Hazlee Azil and Aman, M.M. (2012) High impedance fault localization in a distribution network using the discrete wavelet transform. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Aman, M.M. and Jasmon, G. and Mokhlis, Hazlie and Khan, Q.A. and Bakar, A.H.A. and Karimi, M. (2012) Modeling and simulation of digital frequency relay for generator protection. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Ananthanathorn, Kant and Nukman, Yusoff and Tamrin, Khairul Fikri (2012) Employment of automation system in food canning of corn products. In: 5th AUN/SEED-Net Regional Conference on Manufacturing Engineering, 5-6 November 2012, EDSA Shangri-La Manila, Ortigas Center, Mandaluyong City Philippines. (In Press)

Attaran, A. and Moghavvemi, M. and Jamuar, S.S. (2012) FGMOS-based NMC-RC frequency compensation differential amplifier for low power low voltage applications. In: 2012 1st International Conference on Informatics, Electronics and Vision, ICIEV 2012, 18-19 May 2012, Dhaka, Bangladesh.

Awalin, L.J. and Mokhlis, Hazlie and Halim, A.H.A. (2012) Improved fault location on distribution network based on multiple measurements of voltage sags pattern. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Azaman, A. and Kadri, Nahrizul Adib and Abu Osman, Noor Azuan (2012) Electromagnetic flux modeling of ac field over planar microarray dot electrodes used in dielectrophoretic lab-on-chip device. In: World Congress on Medical Physics and Biomedical Engineering, 26-31 May 2012, Beijing, China.

Dahalan, W.M. and Mokhlis, Hazlie (2012) Network reconfiguration for loss reduction with distributed generations using PSO. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Hakim, S.J.S. and Abdul Razak, H. (2012) Damage detection of steel bridge girder using Artificial Neural Networks. In: 5th International Conference on Emerging Technologies in Non-Destructive Testing, NDT, 2012, Ioannina.

Hakim, S.J.S. and Razak, H.A. (2012) Damage identification using experimental modal analysis and adaptive neuro-fuzzy interface system (ANFIS). In: 30th IMAC, A Conference on Structural Dynamics, 2012, 2012, Jacksonville, FL.

Harizam, M.Z. and Nukman, Y. and Anis, M. and Tamrin, K.F. (2012) Investigation of surface roughness in machining oil palm wood. In: MPOB International Oil Palm Biomass Conference 2012, 20-21 September 2012, Kuala Lumpur, Malaysia. (In Press)

Hashim, Roslan and Fitri, A. and Motamedi, S. (2012) Modelling of coastal hydrodynamics associated with coastal structures. In: 2nd Conference for Regional Cooperation in Ocean and Earth Science Research in the South China Sea, 21-24 October 2012, University of Malaya, Kuala Lumpur, Malaysia.

Hassan, Nor Hidayah Nor and Bakar, Ab Halim Abu and Mokhlis, Hazlie and Illias, Hazlee Azil (2012) Analysis of arrester energy for 132kV overhead transmission line due to back flashover and shielding failure. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Ibrahim, F. and Ahmad, S.A. (2012) Assessment of upper body muscle activity during salat and stretching exercise: a pilot study. In: IEEE-EMBS International Conference on Biomedical and Health Informatics, BHI 2012. In Conj. with the 8th Int. Symp.on Medical Devices and Biosensors and the 7th Int. Symp. on Biomedical and Health Engineering, 2012, Hong Kong and Shenzhen.

Ibrahim, F. and Ahmad, S.A. (2012) Investigation of electromyographic activity during Salat and stretching exercise. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Illias, Hazlee Azil and Bakar, A.H.A. and Mokhlis, Hazlie and Tunio, M.A. and Chen, G. and Lewin, P.L. and Ariffin, A.M. (2012) Simulation of partial discharge within a void under square waveform applied voltage. In: 2012 IEEE Conference on Electrical Insulation and Dielectric Phenomena, CEIDP 2012, 2012, Montreal, QC.

Illias, Hazlee Azil and Lee, Z.H. and Bakar, A.H.A. and Mokhlis, Hazlie and Ariffin, A.M. (2012) Distribution of electric field in medium voltage cable joint geometry. In: 2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012, 2012, Bali.

Illias, Hazlee Azil and Lee, Z.H. and Bakar, A.H.A. and Mokhlis, Hazlie and Chen, G. and Lewin, P.L. (2012) Electric field distribution in 132 kV one piece premolded cable joint structures. In: 2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012, 2012, Bali.

Illias, Hazlee Azil and Low, Tau Jian and Bakar, Ab Halim Abu and Mokhlis, Hazlie (2012) Partial discharge simulation under various applied voltage waveforms. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Illias, Hazlee Azil and Ng, Q.L. and Bakar, A.H.A. and Mokhlis, Hazlie and Ariffin, A.M. (2012) Electric field distribution in 132 kV XLPE cable termination model from finite element method. In: 2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012, 2012, Bali.

Illias, Hazlee Azil and Teo, Soon Yuan and Bakar, Ab Halim Abu and Mokhlis, Hazlie and Chen, George and Lewin, Paul L. (2012) Partial discharge patterns in high voltage insulation. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Illias, Hazlee Azil and Tunio, Mohsin Ali and Bakar, Ab Halim Abu and Mokhlis, Hazlie (2012) Distribution of electric field in capacitor and surge arrester bushings. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Jamian, J.J. and Aman, M.M. and Mustafa, M.W. and Jasmon, G.B. and Mokhlis, Hazlie and Bakar, A.H.A. and Abdullah, M.N. (2012) Optimum multi DG units placement and sizing based on voltage stability index and PSO. In: 2012 47th International Universities Power Engineering Conference, UPEC 2012, 2012, London.

Jamian, J.J. and Mustafa, M.W. and Mokhlis, Hazlie and Abdullah, M.N. (2012) Comparative study on distributed generator sizing using three types of Particle Swarm Optimization. In: Intelligent Systems, Modelling and Simulation (ISMS), 2012 Third International Conference on, 2012.

Jamian, J.J. and Mustafa, M.W. and Mokhlis, Hazlie and Usman, J. (2012) Distributed generator sizing: an iteration Particle Swarm Optimization approach. In: Proceedings of the IASTED International Conference Power and Energy Systems, AsiaPES, 2012.

Jamian, J.J. and Mustafa, M.W. and Muda, Z. and Mokhlis, Hazlie and Aman, M.M. (2012) Effect of load models on Battery-Switching Station allocation in distribution network. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Jumaat, S.A. and Musirin, I. and Othman, M.M. and Mokhlis, Hazlie (2012) Optimal placement and sizing of multiple FACTS devices installation. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Jumaat, S.A. and Musirin, I. and Othman, M.M. and Mokhlis, Hazlie (2012) Particle Swarm Optimization techniques for optimal location and sizing of thyristor controlled series capacitor. In: 2012 International Conference on Innovation, Management and Technology Research, ICIMTR 2012, 2012, Malacca.

Jumaat, S.A. and Musirin, I. and Othman, M.M. and Mokhlis, Hazlie (2012) Placement and sizing of thyristor controlled series compensator using PSO based technique for loss minimization. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Karim, M.R. and Gnanendran, C.T. and Lo, S.C.R. (2012) Effect of geosynthetic reinforcement creep on the long term performance of an embankment. In: GeoCongress 2012: State of the Art and Practice in Geotechnical Engineering, 2012, Oakland, CA.

Karimi, M. and Mokhlis, Hazlie and Bakar, A.H.A. and Laghari, J.A. and Shahriari, A. and Aman, M.M. (2012) Combination of adaptive and intelligent load shedding techniques for distribution network. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Karimi, M. and Mokhlis, Hazlie and Bakar, A.H.A. and Shahriari, A. and Faradonbeh, M.A. and Rosli, H.M. (2012) Impact of load modeling in distribution state estimation. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Laghari, J.A. and Mokhlis, Hazlie and Halim Abu Bakar, A.B. and Karimi, M. and Shahriari, A. (2012) An intelligent under frequency load shedding scheme for islanded distribution network. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Liaquat, A.M. and Masjuki, Haji Hassan and Kalam, M.A. and Varman, M. (2012) Impact of biodiesel on injector deposit formation. In: 5th Regional Conference on New and Renewable Energy (RCNRE 2012), 26-27 September 2012, Hanoi, Vietnam.

Mekhilef, Saad and Khudhur, H.I. and Belkamel, H. (2012) DC link capacitor voltage balancing in three level neutral point clamped inverter. In: 2012 IEEE 13th Workshop on Control and Modeling for Power Electronics, COMPEL 2012, 2012, Kyoto.

Moghavvemi, M. and Jamuar, S.S. and Gan, E.H. and Yap, Y.C. (2012) Design of low cost flexible RGB color sensor. In: 2012 1st International Conference on Informatics, Electronics and Vision, ICIEV 2012, 18-19 May 2012, Dhaka, Bangladesh.

Mohammadhassani, M. and Jumaat, Mohd Zamin and Jameel, M. and Hakim, S.J.S. and Abdollahi, N. (2012) Experimental study on the strain contribution of horizontal and vertical web reinforced bar of HSSCC deep beams. In: 5th International Conference on Emerging Technologies in Non-Destructive Testing, NDT, 2012, Ioannina.

Mokhlis, Hazlie and Bakar, Ab Halim Abu and Illias, Hazlee Azil and Shafie, Mohd Fakrolrazi (2012) Insulation coordination study of 275kV AIS substation in Malaysia. In: 2012 Asia-Pacific Power and Energy Engineering Conference, APPEEC 2012, 2012, Shanghai.

Monajemi, H. and Abdul Razak, H. and Ismail, Z. (2012) Reliability of dynamically measured flexibility matrix on damage detection of frame structures. In: 30th IMAC, A Conference on Structural Dynamics, 2012, 2012, Jacksonville, FL.

Radzi, N.F.M. and Mubin, M. and Rahim, N.A. and Mokhtar, N. (2012) UAV collision detection algorithm design based on circle overlapping test. In: 4th International Conference on Mechanical and Electrical Technology, ICMET 2012, 2012, Kuala Lumpur.

Rahman, M.M. and Jumaat, Mohd Zamin (2012) Cost minimum proportioning of non-Slump concrete mix using genetic algorithms. In: 3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012, 2012, Xiamen.

Rahman, M.M. and Jumaat, Mohd Zamin and Hosen, M.A. (2012) Genetic algorithm for material cost minimization of external strengthening system with fiber reinforced polymer. In: 3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012, 2012, Xiamen.

Rismanchi, Behzad and Saidur, Rahman and Masjuki, Haji Hassan and Mahlia, Teuku Meurah Indra (2012) Cost-benefit analysis of using cold thermal energy storage systems in building applications. In: 2nd International Conference on Advances in Energy Engineering (ICAEE 2011), 27-28 December 2011, Bangkok.

Roslan, H. and Shervin, M. and Arniza, F. (2012) Incorporation of eco-engineering technology in coastal protection: Opportunities and challenges. In: 2nd Conference for Regional Cooperation in Ocean and Earth Science Research in the South China Sea, 21-24 October 2012, University of Malaya, Kuala Lumpur, Malaysia.

Rosli, H.M. and Mokhlis, Hazlie and Bakar, A.H.A. (2012) Optimal measurement placement using PSO for state estimation. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Safiuddin, M. and Salam, M.A. and Jumaat, Mohd Zamin (2012) Correlations between different hardened properties of high-strength self-consolidating concrete including palm oil fuel ash. In: 2011 International Conference on Applied Mechanics, Materials and Manufacturing, ICAMMM 2011, 2012, Shenzhen.

Sarhan, A.A.D. and Matsubara, A. (2012) Investigate the characterization of the machine tool spindle stiffness in radial direction for precise monitoring of cutting forces for intelligent machining. In: Canadian Society for Mechanical Engineering (CSME) International Congress, 04-06 Jun 2012, Manitoba, Canada.

Shahriari, A. and Mokhlis, Hazlie and Bakar, A.H.A. and Karimi, M. and Laghari, J.A. and Kazeminezad, M. (2012) The calculation of low voltage solution based on state space search method in ill-conditioned system. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Shamsudin, N.H. and Latiff, A.A. and Abas, N. and Mokhlis, Hazlie and Awalin, L.J. (2012) Three phase fault algorithm in distribution system by using database approach and impedance based method. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Shekarchian, M. and Moghavvemi, M. and Motasemi, F. and Mahlia, T.M.I. (2012) Cost benefit analysis and energy savings of using compression and absorption chillers for air conditioners in hot and humid climates. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011, 3-4 October 2011, Melaka, Malaysia.

Shiman, F. and Molaei, F. and Oladazimi, M. and Abd Rashid, R. and Habil, H. and Ibrahim, F. (2012) Electro-acupuncture (EA) as an adjunct therapy to methadone maintenance treatment (MMT) in heroin addiction: a study of 2D EEG power spectral topography and Morlet wavelet. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Shiman, F. and Safavi, S.H. and Vaneghi, F.M. and Oladazimi, M. and Safari, M.J. and Ibrahim, F. (2012) EEG feature extraction using parametric and non-parametric models. In: IEEE-EMBS International Conference on Biomedical and Health Informatics, BHI 2012. In Conj. with the 8th Int. Symp.on Medical Devices and Biosensors and the 7th Int. Symp. on Biomedical and Health Engineering, 2012, Hong Kong and Shenzhen.

Soon, C. and Wei, H.L. (2012) A study of ship's propeller jet induced scour. In: 2nd Conference for Regional Cooperation in Ocean and Earth Science Research in the South China Sea, 21-24 October 2012, University of Malaya, Kuala Lumpur, Malaysia.

Talib, D.N.A. and Bakar, A.H.A. and Mokhlis, Hazlie (2012) Parameters affecting lightning backflash over pattern at 132kV double circuit transmission lines. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Ting, H.N. and Lee, C.H. (2012) Formant frequencies of normal Malaysian Indian young adults in sustained vowels. In: World Congress on Medical Physics and Biomedical Engineering, 26-31 May 2012, Beijing, China.

Vaneghi, F.M. and Oladazimi, M. and Shiman, F. and Kordi, A. and Safari, M.J. and Ibrahim, F. (2012) A comparative approach to ECG feature extraction methods. In: 3rd International Conference on Intelligent Systems Modelling and Simulation, ISMS 2012, 2012, Kota Kinabalu.

Varman, M. and Masjuki, Haji Hassan and Cheah, M.Y. and Cheng, Y.H. and Kalam, M.A. and Liaquat, A.M. and Shahabuddin, M. and Mofijur, M. (2012) Storage stability of biofuel. In: 2012 International Symposium on Energy Technology and Strategy, 22-24 November 2012, Tainan, Taiwan.

Yafouz, Bashar and Kadri, Nahrizul Adib and Ibrahim, Fatimah (2012) A numerical analysis of electric field strength over planar microarray dot electrode for dielectrophoretic lab-on-chip device. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Yahya, S. and Moghavvemi, M. and Almurib, H.A.F. (2012) Geometrically bounded singularities and joint limits prevention of a three dimensional planar redundant manipulator using artificial neural networks. In: 8th International Conference on Emerging Intelligent Computing Technology and Applications, ICIC 2012, 25-29 July 2012, Huangshan, China.

Yahya, S. and Moghavvemi, M. and Mohamed, H.A.F. (2012) Improvement of singularity avoidance for three dimensional planar manipulators by increasing their degrees of freedom. In: 2012 International Symposium on Computer, Consumer and Control, IS3C 2012, 4-6 June 2012, Taichung, Taiwan.

Yahya, S. and Moghavvemi, M. and Mohamed, H.A.F. (2012) Manipulability constraint locus for a six degrees of freedom redundant planar manipulator. In: 2012 International Symposium on Computer, Consumer and Control, IS3C 2012, 4-6 June 2012, Taichung, Taiwan.

Yung, J.C. and Wei, H.L. (2012) Numerical investigation of a ship propeller jet using computational fluid dynamics (CFD). In: 2nd Conference for Regional Cooperation in Ocean and Earth Science Research in the South China Sea, 21-24 October 2012, University of Malaya, Kuala Lumpur, Malaysia.

Yusof, N.A. and Sapari, N.M. and Mokhlis, Hazlie and Selvaraj, J. (2012) A comparative study of 5-level and 7-level multilevel inverter connected to the grid. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Book

Yasin, M. and Harun, S.W. and Arof, H., eds. (2012) Fiber optic sensors. InTech. ISBN 978-953-307-922-6

Yasin, M. and Harun, S.W. and Arof, H., eds. (2012) Optical fiber communications and devices. InTech. ISBN 978-953-307-954-7

Yasin, M. and Harun, S.W. and Arof, H., eds. (2012) Selected topics on optical fiber technology. InTech. ISBN 978-953-51-0091-1