Correlations between different hardened properties of high-strength self-consolidating concrete including palm oil fuel ash

Safiuddin, M. and Salam, M.A. and Jumaat, Mohd Zamin (2012) Correlations between different hardened properties of high-strength self-consolidating concrete including palm oil fuel ash. In: 2011 International Conference on Applied Mechanics, Materials and Manufacturing, ICAMMM 2011, 2012, Shenzhen.

Full text not available from this repository. (Request a copy)
Official URL: http://www.scopus.com/inward/record.url?eid=2-s2.0...

Abstract

Palm oil fuel ash is considered as an agro-waste material in Malaysia. Various investigations have been conducted on the use of palm oil fuel ash as a supplementary cementing material for concrete. In the present study, palm oil fuel ash was used as a partial replacement of normal portland cement to produce high-strength self-consolidating concrete. In total, twenty (20) self-consolidating concrete mixes were prepared by varying water to binder ratio, palm oil fuel ash content, and high-range water reducer dosage. Palm oil fuel ash was used by replacing 0-30 of normal portland cement by weight at the water to binder ratios ranging from 0.25 to 0.40. The compressive, splitting tensile and flexural strengths, modulus of elasticity, ultrasonic pulse velocity, and porosity of various self-consolidating concrete mixes were investigated. However, the correlations between the hardened properties of concrete were emphasized in this study. The experimental findings revealed that strong correlations exist between different hardened properties of high-strength self-consolidating concrete.

Item Type: Conference or Workshop Item (Paper)
Additional Information: Conference code: 87300 Export Date: 6 January 2013 Source: Scopus doi: 10.4028/www.scientific.net/AMM.117-119.1215 Language of Original Document: English Correspondence Address: Safiuddin, Md.; Department of Civil and Environmental Engineering, Faculty of Engineering, University of Waterloo, 200 University Avenue West, Waterloo, ON, N2L 3G1, Canada; email: msafiudd@engmail.uwaterloo.ca References: Khayat, K.H., (1999) ACI Materials Journal, 96, p. 346; Okamura, H., (1997) Concrete International, 19, p. 50; Okamura, H., Ouchi, M., (2003) Journal of Advanced Concrete Technology, 1, p. 5; Ozawa, K., Mackawa, K., Okamura, H., (1989) Proceedings of the 2nd East Asia Pacific Conference on Structural Engineering and Construction, p. 445. , Chiang-Mai, Thailand; Okamura, H., Ozawa, K., (1995) Concrete Library of JSCE, 25, p. 107; Cyr, M., Mouret, M., (2003) Proceedings of the Seventh CANMET/ACI International Conference on Superplasticizers and Other Chemical Admixtures in Concrete, p. 241. , ACI SP-217; Kim, H., Park, Y.-D., Noh, J., Song, Y., Han, C., Kang, S., (1997) Proceedings of the Third CANMET/ACI International Conference, p. 653. , edited by V. M. Malhotra, American Concrete Institute, Michigan, USA; Safiuddin, M., (2008) Development of Self-consolidating High Performance Concrete Incorporating Rice Husk Ash, , PhD thesis, University of Waterloo, Waterloo, Ontario, Canada; Abdullah, K., Hussin, M.W., Zakaria, F., Muhamad, R., Hamid, Z.A., (2006) Proceedings of the 6th Asia-pacific Structural Conference on Engineering and Construction (APSEC 2006), pp. B132. , Kuala Lumpur, Malaysia; Tangchirapat, W., Jaturapitakkul, C., Chindaprasirt, P., (2009) Construction and Building Materials, 23, p. 2641; Tonnayopas, D., Nilrat, F., Putto, K., Tantiwitayawanich, J., (2006) Proceedings of the 4th Thailand Materials Science and Engineering, p. 1. , Pathumthani, Thailand; Sumadi, S.R., Hussin, M.W., (1995) Journal of Ferrocement, 25, p. 25; Safiuddin, M., Salam, M.A., Jumaat, M.Z., (2011) Journal of Civil Engineering and Management, 17, p. 234; (2009) Annual Book of ASTM Standards, , ASTM C 33 04.02. American Socity for Testing Materials, Philadelphia, USA; (2002) ACI Manual of Concrete Practice, Part 1, , ACI 211.4R-93 American Concrete Institute, Farmington Hills, Michigan, USA; Safiuddin, M., Salam, M.A., Jumaat, M.Z., (2011) Advanced Materials Research, 250-253, p. 409; (2006) Annual Book of ASTM Standards, , ASTM C 1611/C 1611M 04.02, American Society for Testing and Materials, Philadelphia, USA; (2004) Annual Book of ASTM Standards, , ASTM C 39/C 39M 04.02, American Society for Testing and Materials, Philadelphia, USA; (2004) Annual Book of ASTM Standards, , ASTM C 496/C 496M 04.02, American Society for Testing and Materials, Philadelphia, USA; (2004) Annual Book of ASTM Standards, , ASTM C 78/C 78M 04.02, American Society for Testing and Materials, Philadelphia, USA; (2004) Annual Book of ASTM Standards, , ASTM C 469/C 469M 04.02, American Society for Testing and Materials, Philadelphia, USA; (2004) Annual Book of ASTM Standards, , ASTM C 215 04.02, American Society for Testing and Materials, Philadelphia, USA; (2004) Annual Book of ASTM Standards, , ASTM C 597 04.02, American Society for Testing and Materials, Philadelphia, USA; (2004) Annual Book of ASTM Standards, , ASTM C 642 04.02, American Society for Testing and Materials, Philadelphia, USA; (2002) Specifications and Guidelines for Self-consolidating Concrete, , EFNARC (European Federation of Suppliers of Specialist Construction Chemicals (EFNARC), Surrey, UK; Khayat, K.H., (2000) ACI Materials Journal, 97, p. 526; Wiegrink, K., Marikunte, S., Shah, S.P., (1996) ACI Materials Journal, 93, p. 409; Erdogan, T.Y., (2003) Concrete, , Middle East Technical University Press, Ankara; (2005) ACI Manual of Concrete Practice, , ACI 318-05 Part 3, American Concrete Institute, Farmington Hills, Michigan, USA; Demirboǧa, R., Türkmen, I., Karakoc, M.B., (2004) Cement and Concrete Research, 34, p. 2329; Al-Amoudi, O.S.B., Maslehuddin, M., Asi, I.M., (1996) Cement, Concrete, and Aggregates, 18, p. 71; Lian, C., Zhuge, Y., Beecham, S., (2011) Construction and Buidling Materials, 25, p. 4294
Uncontrolled Keywords: Correlations, Hardened properties, Palm oil fuel ash, Self-consolidating concrete, Agro-wastes, Fuel ash, High range water reducer, High-strength, Malaysia, Palm oil, Partial replacement, Strong correlation, Supplementary cementing materials, Ultrasonic pulse velocity, Water-to-binder ratio, Binders, Computational mechanics, Concrete mixers, Fuels, Hardening, Portland cement, Tensile strength, Vegetable oils, Strength of materials.
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Divisions: Faculty of Engineering
Depositing User: Mr Jenal S
Date Deposited: 22 Apr 2013 01:27
Last Modified: 05 Feb 2020 04:23
URI: http://eprints.um.edu.my/id/eprint/5863

Actions (login required)

View Item View Item