Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 2249.

A

Abd Aziz, N.A. and Ibrahim, Z. and Nawawi, S.W. and Sudin, S. and Mubin, M. and Abd Aziz, K. (2014) Synchronous gravitational search algorithm vs asynchronous gravitational search algorithm: a statistical analysis. In: 13th International Conference on Intelligent Software Methodologies, Tools, and Techniques, 22-24 Sep 2014, Langkawi, Malaysia.

Abd Rahman, H.S. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Tunku Ahmad, T.S. and Ng, E.S. (2008) Validation of finite element analysis for a new external finger fixator to correct flexion deformity - a preliminary result. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Abd Rashid, A.F. and Idris, J. and Yusoff, S. (2017) Environmental Impact Analysis on Residential Building in Malaysia Using Life Cycle Assessment. Sustainability, 9 (3). p. 329. ISSN 2071-1050

Abd Rashid, A.F. and Yusoff, S. (2015) A review of life cycle assessment method for building industry. Renewable & Sustainable Energy Reviews, 45. pp. 244-248. ISSN 1364-0321

Abd Razak, N.A. and Abu Osman, Noor Azuan and Ali, S. and Gholizadeh, H. and Wan Abas, Wan Abu Bakar (2015) Comparison study of the prosthetics interface pressure profile of air splint socket and ICRC polypropylene socket for upper limb prosthetics. Biocybernetics and Biomedical Engineering, 35 (2). pp. 100-105. ISSN 0208-5216

Abd Razak, N.A. and Abu Osman, Noor Azuan and Kamyab, M. and Wan Abas, W.A.B. and Gholizadeh, H. (2014) Satisfaction and problems experienced with wrist movements: comparison between a common body-powered prosthesis and a new biomechatronics prosthesis. American Journal of Physical Medicine and Rehabilitation. ISSN 0894-9115

Abd Razak, N.A. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar (2012) Kinematic comparison of the wrist movements that are possible with a biomechatronics wrist prosthesis and a body-powered prosthesis: a preliminary study. Disability and Rehabilitation: Assistive Technology (00). pp. 1-6. ISSN 1748-3107

Abd Razak, N.A. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar (2013) Kinematic comparison of the wrist movements that are possible with a biomechatronics wrist prosthesis and a body-powered prosthesis: a preliminary study. Disability and Rehabilitation: Assistive Technology, 8 (3). pp. 255-260. ISSN 1748-3107

Abd Razak, N.A. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Ahmad Fu'ad, A.N. (2011) Comparison study of the transradial prosthetics and biological hand using motion analysis approach. In: International MultiConference of Engineers and Computer Scientists 2011, IMECS 2011, 2011, Kowloon.

Abd Sukor, J. and Mohktar, M.S. and Redmond, S.J. and Lovell, N.H. (2015) Signal quality measures on pulse oximetry and blood pressure signals acquired from self-measurement in a home environment. IEEE Journal of Biomedical and Health Informatics, 19 (1). pp. 102-108. ISSN 2168-2194

Abdel-Akher, M. and Nor, K.M. and Mokhlis, H. and Rashid, A.H.A. (2004) Development of three phase load flow by reusing object oriented single phase load flow. In: Universities Power Engineering Conference, 2004. UPEC 2004. 39th International, 2004.

Abdelaziz, E.A. and Saidur, R. and Mekhilef, S. (2011) A review on energy saving strategies in industrial sector. Renewable and Sustainable Energy Reviews, 15 (1). pp. 150-168. ISSN 1364-0321

Abdelaziz, Mahrez and Mohamed Rehan, Karim (2010) Rheological evaluation of bituminous binder modified with waste plastic material. In: 5th International Symposium on Hydrocarbons & Chemistry (ISHC5), Sidi Fredj, Algiers, 23 - 25 May 2010. (Unpublished)

Abdesselam, H. and Masjuki, Haji Hassan and Saidur, Rahman and Sattar, M.A. and Guellal, M. (2008) Performance study of water-to-water heat pump using non-azeotropic refrigerant mixtures R407C. International Energy Journal, 9 (4).

Abdolrasol, M.G.M. and Mekhilef, S. (2012) Development of hybrid anti-islanding based on distributed generation interconnection. International Review on Modelling and Simulations, 5 (1). pp. 60-68. ISSN 1974-9821

Abdolrasol, M.G.M. and Mekhilef, S. (2009) Hybrid anti-islanding algorithm for utility interconnection of distributed generation. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, Kuala Lumpur.

Abdolrasol, M.G.M. and Mekhilef, S. (2010) Robust hybrid anti-islanding method for inverter-based distributed generation. In: 2010 IEEE Region 10 Conference, TENCON 2010, Fukuoka.

Abdolrasol, M.G.M. and Mekhilef, S. (2010) Three phase grid connected anti-islanding controller based on distributed generation interconnection. In: 2010 IEEE International Conference on Power and Energy, PECon2010, Kuala Lumpur.

Abdul Hakim, S.R. (2012) Laminar mixed convection in inclined triangular enclosures filled with water based cu nanofluid. Industrial and Engineering Chemistry Research, 51 (10). pp. 4090-4100. ISSN 0888-5885

Abdul Kadir, M.N. and Mekhilef, S. (2009) Eighteen-level inverter control with minimum switching losses. In: 2009 13th European Conference on Power Electronics and Applications, EPE '09, Barcelona.

Abdul Kadir, M.N. and Mekhilef, S. and Ping, H.W. (2008) Direct torque control permanent magnet synchronous motor drive with asymmetrical multilevel inverter supply. In: 7th Internatonal Conference on Power Electronics, ICPE'07, Daegu.

Abdul Rahim, H. and Ibrahim, F. and Taib, M.N. (2010) System identification of nonlinear autoregressive models in monitoring dengue infection. International Journal on Smart Sensing and Intelligent Systems, 3 (4). pp. 783-806. ISSN 11785608

Abdul Rahim, H. and Ibrahim, F. and Taib, M.N. and Abdul Rahim, R. and Mad Sam, Y. (2008) Monitoring haemoglobin status in dengue patients using ARMAX model. In: International Symposium on Information Technology 2008, ITSim, 2008, Kuala Lumpur.

Abdul Rahim, H. and Taib, M.N. and Ibrahim, F. and Abdul Rahim, Z. (2011) Bioelectrical impedance analysis device: measurement of bioelectrical tissue conductivity in dengue patients. Sensors and Transducers, 125 (2). pp. 256-265. ISSN 17265479 (ISSN)

Abdul Raman, A.A. and Nik Meriam, N.S. and Ibrahim, S. and Vasanthi, S. (2007) Buble Size Distribution: Comparison between Six-bladed Curve Blade Impeller and Rushton. Malaysian Journal of Chemical Engineering, 1. pp. 163-170. ISSN 1985-3564

Abdul Raman, A.A. and Vasanthi, S. and Ibrahim, S. and Nik Sulaiman, N.M. (2004) Bubble breakup characteristics of Rushton turbine and curve blade impellers. In: 18th Symposium of Malaysian Chemical Engineers (SOMChe), 13-14 December 2004, Universiti Teknologi Petronas, Tronoh, Perak, Malaysia. (Submitted)

Abdul Raman, Abdul Aziz and Nik Meriam, N.S. and Ibrahim, Shaliza and Vasanthi, S. (2007) Bubble size distribution: comparison between six-bladed curve blade impeller and Rushton Turbine. Malaysian Journal of Chemical Engineering, 1. pp. 163-170.

Abdul Wahab, A.K. and Hussain, M.A. and Omar, R. (2009) Development of partially simulated chemical reactor for the implementation of advanced control systems. In: CHEMECA Conference 2009, 27-30 Sept 2009, Perth, Australia.

Abdul Wahab, A.K. and Hussain, M.A. and Omar, R. (2008) An artificial intelligence software-based controller for temperature control of a partially simulated chemical reactor system. Chemical Product and Process Modeling, 3 (1). ISSN 19342659

Abdul Wahab, M.J. and Jumaat, M.Z. and Mohamad Khaidzir, M.O. (2012) Statistical technique for grouping tropical timbers into similar strength groups. Modern Applied Science, 6 (3). pp. 73-80. ISSN 1913-1852

Abdul-Wahab, A.K. and Hussain, M.A. and Omar, R. (2009) Development of PARS-EX pilot plant to study control strategies. Control Engineering Practice, 17 (10). pp. 1220-1233. ISSN 0967-0661

Abdulla, A.I. and Razak, H.A. and Salih, Y.A. and Ali, M.I. (2016) Mechanical properties of sand modified resins used for bonding CFRP to concrete substrates. International Journal of Sustainable Built Environment, 5 (2). pp. 517-525. ISSN 2212-6090

Abdullah, A. and Karem, M.R. and Yamanaka, H. and Okushima, M. (2011) Empirical analysis on the effect of gross vehicle weight and vehicle size on speed in car following situation. In: Proceedings of the Eastern Asia Society for Transportation Studies, 20-23 Jun 2011, Jeju, Korea.

Abdullah, A.S. and Hai, L.K. and Osman, N.A.A. and Zainon, M.Z. (2006) Vision based automatic steering control using a PID controller. Jurnal Teknologi (A), 44 (A). pp. 97-114. ISSN 0127-9696

Abdullah, M.A. and Yatim, A.H.M. and Tan, C.W.A. and Saidur, R. (2012) A review of maximum power point tracking algorithms for wind energy systems. Renewable and Sustainable Energy Reviews, 16 (5). pp. 3220-3227. ISSN 1364-0321

Abdullah, M.K. and Abdalla, M.F. and Abas, A.F. and Amouzad, G. (2007) Duty-cycle division multiplexing (DCDM): a novel and economical optical multiplexing and electrical demultiplexing technique for high speed fiber optics networks. In: Wireless and Optical Communications Networks, 2007. WOCN'07. IFIP International Conference on, 2007.

Abdullah, M.K. and Mahdiraji, G.A. and Abas, A.F. and Mokhtar, M. (2008) Absolute polar duty cycle division multiplexing: an economical and spectral efficient multiplexing technique. In: Wireless and Optical Communications Networks, 2008. WOCN'08. 5th IFIP International Conference on, 2008.

Abdullah, M.K. and Mahdiraji, G.A. and Elhag, M.F. (2007) A new duty cycle based digital multiplexing technique. In: Telecommunications and Malaysia International Conference on Communications, 2007. ICT-MICC 2007. IEEE International Conference on, 2007.

Abdullah, M.K. and Mahdiraji, G.A. and Mohammadi, A.M. and Mokhtar, M. and Abas, A.F. (2008) Duty Cycle Division Multiplexing (DCDM); a new electrical multiplexing technique for high speed optical communication systems. In: Telecommunication Technologies 2008 and 2008 2nd Malaysia Conference on Photonics. NCTT-MCP 2008. 6th National Conference on, 2008.

Abdullah, M.N. and Bakar, A.H.A. and Rahim, N.A. and Mokhlis, H. and Illias, H.A. and Jamian, J.J. (2014) Modified Particle Swarm Optimization with Time Varying Acceleration Coefficients for Economic Load Dispatch with Generator Constraints. Journal of Electrical Engineering & Technology, 9 (1). pp. 15-26. ISSN 1975-0102

Abdullah, M.N. and Rahim, N.A. and Bakar, A.H.A. and Mokhlis, H. and Illias, H.A. and Jamian, J.J. (2013) Efficient evolutionary particle swarm optimization approach for nonconvex economic load dispatch problem. Przeglad Elektrotechniczny, 89 (2 A). pp. 139-143. ISSN 00332097

Abdullah, Norbani and Elsheikh, Mohamed Hamid and Ibrahim, Nik Muhd Jazli Nik and Said, Suhana Mohd and Sabri, Mohd Faizul Mohd and Masjuki, Haji Hassan (2015) Thermoelcctrical properties and surface morphology of iron(ii) complexes with conjugated mulltidonor ligands. In: Manchester Conference Centre, Manchester, United Kingdom, 13-16 September 2015, Manchester, United Kingdom.

Abdullah, Norbani and Elsheikh, Mohamed Hamid and Ibrahim, Nik Muhd Jazli Nik and Said, Suhana Mohd and Sabri, Mohd Faizul Mohd and Masjuki, Haji Hassan and Marlina, Anita (2015) Magnetic, thermal, mesomorphic and thermoelectric properties of mononuclear, dimeric and polymeric iron(II) complexes with conjugated ligands. RSC Advances, 5 (63). pp. 50999-51007. ISSN 2046-2069

Abioye, O.P. and Agamuthu, P. and Abdul Aziz, A. (2010) Phytoaccumulation of zinc and iron by jatropha curcas grown in used lubricating oil-contaminated soil. Malaysian Journal of Science, 29 (3). pp. 207-213. ISSN 13943065 (ISSN)

Abioye, O.P. and Agamuthu, P. and Abdul Aziz, A.R. (2012) Biodegradation of used motor oil in soil using organic waste amendments. Biotechnology Research International, 2012. p. 587041. ISSN 2090-3138

Abioye, O.P. and Agamuthu, P. and Abdul Aziz, A.R. (2012) Phytotreatment of soil contaminated with used lubricating oil using Hibiscus cannabinus. Biodegradation, 23 (2). pp. 277-286. ISSN 1572-9729 (Electronic) 0923-9820 (Linking)

Abioye, O.P. and Aziz, A.A. and Agamuthu, P. (2009) Stimulated biodegradation of used lubricating oil in soil using organic wastes. Malaysian Journal of Science, 28 (2). pp. 127-133.

Abioye, P.O. and Aziz, A.A. and Agamuthu, P. (2010) Enhanced biodegradation of used engine oil in soil amended with organic wastes. Water Air and Soil Pollution, 209 (1-4). pp. 173-179. ISSN 0049-6979

Abo-Hamad, A. and AlSaadi, M.A. and Hayyan, M. and Juneidi, I. and Hashim, M.A. (2016) Ionic Liquid-Carbon Nanomaterial Hybrids for Electrochemical Sensor Applications: a Review. Electrochimica Acta, 193. pp. 321-343. ISSN 0013-4686

Abo-Hamad, A. and Hayyan, M. and AlSaadi, M.A. and Hashim, M.A. (2015) Potential applications of deep eutectic solvents in nanotechnology. Chemical Engineering Journal, 273. pp. 551-567. ISSN 1385-8947

Aboodarda, S.J. and Hamid, M.S.A. and Che Muhamed, A.M. and Ibrahim, F. and Thompson, M. (2013) Resultant muscle torque and electromyographic activity during high intensity elastic resistance and free weight exercises. European Journal of Sport Science, 13 (2). pp. 155-163. ISSN 17461391

Aboodarda, S.J. and Muhamed, A.M.C. and Ibrahim, F. and Hamid, M.S.B.A. (2009) Electromyographic activity using elastic resistance and nautilus machine exercises. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.

Aboodarda, S.J. and Shariff, M.A.H. and Muhamed, A.M.C. and Ibrahim, F. and Yusof, A. (2011) Electromyographic activity and applied load during high intensity elastic resistance and nautilus machine exercises. Journal of Human Kinetics, 30 (1). pp. 5-12. ISSN 1640-5544

Aboodarda, S.J. and Yosuf, A. and Abu Osman, Noor Azuan and Thompson, M.W. and Mokhtar, A.H. (2012) The contribution of elasticresistance during the eccentric phase of a countermovement jump enhances performance. International Journal of Sports Physiology and Performance. ISSN 1555-0265

Aboodarda, S.J. and Yusof, A. and Abu Osman, Noor Azuan and Ibrahim, Fatimah (2011) Two practical strategies for developing resultant muscle torque production using elastic resistance device. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Abramian, M. and Lovell, N.H. and Morley, J.W. and Suaning, G.J. and Dokos, S. (2015) Activation and inhibition of retinal ganglion cells in response to epiretinal electrical stimulation: A computational modelling study. Journal of Neural Engineering, 12 (1). 016002. ISSN 1741-2560

Abu Osman, Noor Azuan and Spence, W.D. and Solomonidis, S.E. and Paul, J.P. and Weir, A.M. (2010) Transducers for the determination of the pressure and shear stress distribution at the stump-socket interface of trans-tibial amputees. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 224 (8). pp. 1239-1250. ISSN 2041-2975

Abu Osman, Noor Azuan and Spence, W.D. and Solomonidis, S.E. and Paul, J.P. and Weir, A.M. (2010) The patellar tendon bar! Is it a necessary feature? Medical Engineering & Physics, 32 (7). pp. 760-765. ISSN 1350-4533

Abu-Bakar, S.H. and Muhammad-Sukki, F. and Freier, D. and Ramirez-Iniguez, R. and Mallick, T.K. and Munir, A.B. and Mohd Yasin, S.H. and Mas'ud, A.A. and Bani, N.A. (2016) Performance analysis of a solar window incorporating a novel rotationally asymmetrical concentrator. Energy, 99. pp. 181-192. ISSN 0360-5442

Abu-Bakar, S.H. and Muhammad-Sukki, F. and Freier, D. and Ramirez-Iniguez, R. and Mallick, T.K. and Munir, A.B. and Yasin, S.H.M. and Mas’ud, A.A. and Abu-Bakar, S.S. and Bani, N.A. and Muhtazaruddin, M.N. (2017) Potential of Implementing the Low Concentration Photovoltaic Systems in the United Kingdom. International Journal of Electrical and Computer Engineering (IJECE), 7 (3). pp. 1398-1405. ISSN 2088-8708

Abubakar, A. and Mantoro, T. and Moedjiono, S. and Ayu, M.A. and Chiroma, H. and Waqas, A. and Abdulhamid, S.M. and Hamza, M.F. and Gital, A.Y. (2016) A Support Vector Machine Classification of Computational Capabilities of 3D Map on Mobile Device for Navigation Aid. International Journal of Interactive Mobile Technologies (iJIM), 10 (3). pp. 4-10. ISSN 1865-7923

Abutaha, F. and Razak, H.A. and Kanadasan, Jegathish (2016) Effect of palm oil clinker (POC) aggregates on fresh and hardened properties of concrete. Construction and Building Materials, 112. pp. 416-423. ISSN 0950-0618

Acharya, U.R. and Chowriappa, P. and Fujita, H. and Bhat, S. and Dua, S. and Koh, J.E.W. and Eugene, L.W.J. and Kongmebhol, P. and Ng, K.H. (2016) Thyroid lesion classification in 242 patient population using Gabor transform features from high resolution ultrasound images. Knowledge-Based Systems, 107. pp. 235-245. ISSN 0950-7051

Acharya, U.R. and Faust, O. and Molinari, F. and Sree, S.V. and Junnarkar, S.P. and Sudarshan, V. (2015) Ultrasound-based tissue characterization and classification of fatty liver disease: A screening and diagnostic paradigm. Knowledge-Based Systems, 75. pp. 66-77. ISSN 0950-7051

Acharya, U.R. and Fujita, H. and Bhat, S. and Koh, J.E.W. and Adam, M. and Ghista, D.N. and Sudarshan, V.K. and Chua, K.P. and Chua, K.C. and Molinari, F. and Ng, E.Y.K. and Tan, R.S. (2016) Automated diagnosis of diabetes using entropies and diabetic index. Journal of Mechanics in Medicine and Biology (jmmb), 16 (01). p. 1640008. ISSN 0219-5194

Acharya, U.R. and Fujita, H. and Bhat, S. and Raghavendra, U. and Gudigar, A. and Molinari, F. and Vijayananthan, A. and Ng, K.H. (2016) Decision support system for fatty liver disease using GIST descriptors extracted from ultrasound images. Information Fusion, 29. pp. 32-39. ISSN 1566-2535

Acharya, U.R. and Fujita, H. and Oh, S.L. and Hagiwara, Y. and Tan, J.H. and Adam, M. (2017) Application of deep convolutional neural network for automated detection of myocardial infarction using ECG signals. Information Sciences, 415. pp. 190-198. ISSN 0020-0255

Acharya, U.R. and Fujita, H. and Sudarshan, V.K. and Mookiah, M.R.K. and Koh, J.E.W. and Tan, J.H. and Hagiwara, Y. and Chua, C.K. and Junnarkar, S.P. and Vijayananthan, A. and Ng, K.H. (2016) An integrated index for identification of fatty liver disease using radon transform and discrete cosine transform features in ultrasound images. Information Fusion, 31. pp. 43-53. ISSN 1566-2535

Acharya, U.R. and Fujita, H. and Sudarshan, V.K. and Oh, S.L. and Adam, M. and Koh, J.E.W. and Tan, J.H. and Ghista, D.N. and Martis, R.J. and Chua, C.K. and Poo, C.K. and Tan, R.S. (2016) Automated detection and localization of myocardial infarction using electrocardiogram: a comparative study of different leads. Knowledge-Based Systems, 99. pp. 146-156. ISSN 0950-7051

Acharya, U.R. and Fujita, H. and Sudarshan, V.K. and Oh, S.L. and Adam, M. and Tan, J.H. and Koo, J.H. and Jain, A. and Lim, C.M. and Chua, K.C. (2017) Automated characterization of coronary artery disease, myocardial infarction, and congestive heart failure using contourlet and shearlet transforms of electrocardiogram signal. Knowledge-Based Systems, 132. pp. 156-166. ISSN 0950-7051

Acharya, U.R. and Molinari, F. and Sree, S.V. and Swapna, G. and Saba, L. and Guerriero, S. and Suri, J.S. (2015) Ovarian tissue characterization in ultrasound: A Review. Technology in Cancer Research & Treatment, 14 (3). pp. 251-261. ISSN 1533-0338

Acharya, U.R. and Mookiah, M.R.K. and Koh, J.E.W. and Tan, J.H. and Bhandary, S.V. and Rao, A.K. and Fujita, H. and Hagiwara, Y. and Chua, C.K. and Laude, A. (2016) Automated screening system for retinal health using bi-dimensional empirical mode decomposition and integrated index. Computers in Biology and Medicine, 75. pp. 54-62. ISSN 0010-4825

Acharya, U.R. and Mookiah, M.R.K. and Koh, J.E.W. and Tan, J.H. and Noronha, K. and Bhandary, S.V. and Rao, A.K. and Hagiwara, Y. and Chua, C.K. and Laude, A. (2016) Novel risk index for the identification of age-related macular degeneration using radon transform and DWT features. Computers in Biology and Medicine, 73. pp. 131-140. ISSN 0010-4825

Acharya, U.R. and Ng, E.Y.K. and Eugene, L.W.J. and Noronha, K.P. and Min, L.C. and Nayak, K.P. and Bhandary, S.V. (2015) Decision support system for the glaucoma using Gabor transformation. Biomedical Signal Processing and Control, 15. pp. 18-26. ISSN 1746-8094

Acharya, U.R. and Raghavendra, U. and Fujita, H. and Hagiwara, Y. and Koh, J.E.W. and Jen Hong, T. and Sudarshan, V.K. and Vijayananthan, A. and Yeong, C.H. and Gudigar, A. and Ng, K.H. (2016) Automated characterization of fatty liver disease and cirrhosis using curvelet transform and entropy features extracted from ultrasound images. Computers in Biology and Medicine, 79. pp. 250-258. ISSN 0010-4825

Acharya, U.R. and Sree, S.V. and Molinari, F. and Saba, L. and Nicolaides, A. and Suri, J.S. (2015) An automated technique for carotid far wall classification using grayscale features and wall thickness variability. Journal of Clinical Ultrasound, 43 (5). pp. 302-311. ISSN 0091-2751

Acharya, U.R. and Sudarshan, V.K. and Adeli, H. and Santhosh, J. and Koh, J.E.W. and Adeli, A. (2015) Computer-aided diagnosis of depression using EEG signals. European Neurology, 73 (5-6). pp. 329-336. ISSN 0014-3022

Acharya, U.R. and Sudarshan, V.K. and Adeli, H. and Santhosh, J. and Koh, J.E.W. and Puthankatti, S.D. and Adeli, A. (2016) A novel depression diagnosis index using nonlinear features in EEG signals. European Neurology, 74 (1-2). pp. 79-83. ISSN 0014-3022

Acharya, U.R. and Sudarshan, V.K. and Ghista, D.N. and Lim, W.J.E. and Molinari, F. and Sankaranarayanan, M. (2015) Computer-aided diagnosis of diabetic subjects by heart rate variability signals using discrete wavelet transform method. Knowledge-Based Systems, 81. pp. 56-64.

Adam, A. and Ibrahim, Z. and Mokhtar, N. and Shapiai, M.I. and Cumming, P. and Mubin, M. (2016) Evaluation of different time domain peak models using extreme learning machine-based peak detection for EEG signal. SpringerPlus, 5 (1). p. 1036. ISSN 2193-1801

Adikan, Faisal Rafiq Mahamd and Abu Hassan, M.R. and Abu Bakar, M.H. and Dambul, K.D. (2012) Optical-based sensors for monitoring corrosion of reinforcement rebar via an etched cladding Bragg grating. Sensors, 12 (11). pp. 15820-15826. ISSN 1424-8220

Adikan, Faisal Rafiq Mahamd and Al-Fakih, E. and Abu Osman, Noor Azuan (2012) The use of fiber Bragg grating sensors in biomechanics and rehabilitation applications: the state-of-the-art and ongoing research topics. Sensors, 12 (10). pp. 12890-12926. ISSN 1424-8220

Adikan, Faisal Rafiq Mahamd and Hisham, H.K. and Mahdiraji, G.A. and Abas, A.F. and Mahdi, M.A. (2012) Characterization of transient response in fiber grating Fabry–Perot lasers. IEEE Photonics Journal, 4 (6). pp. 2353-2371. ISSN 1943-0655

Adinata, D. and Daud, W.M.A.W. and Aroua, M.K. (2007) Carbon modified silica based adsorbent for potential application. Journal of Nanoparticle Research, 9 (4). pp. 555-559. ISSN 1388-0764

Adinata, D. and Daud, W.M.A.W. and Aroua, M.K. (2007) Production of carbon molecular sieves from palm shell based activated carbon by pore sizes modification with benzene for methane selective separation. Fuel Processing Technology, 88 (6). pp. 599-605. ISSN 0378-3820

Adinata, D. and Daud, Wan Mohd Ashri Wan and Aroua, M.K. (2007) Preparation and characterization of activated carbon from palm shell by chemical activation with K2CO3. Bioresource Technology, 98 (1). pp. 145-149. ISSN 0960-8524

Adwan, Somaya and Arof, Hamzah (2012) On improving dynamic time warping for pattern matching. Measurement, 45. pp. 1609-1620. ISSN 0263-2241

Adzila, S. and Ramesh, S. and Sopyan, I. (2016) Properties of magnesium doped nanocrystalline hydroxyapatite synthesize by mechanochemical method. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14097-14100. ISSN 1819-6608

Adzila, S. and Sopyan, I. and Yong, T.C. and Ramesh, S. and Wong, Y.H. and Purbolaksono, J. and Hamdi, M. (2013) Mechanochemical synthesis of nanohydroxyapatite bioceramics. Indian Journal of Chemistry : A, 52A. pp. 1570-1575. ISSN 0376-4710

Aeinehvand, Mohammad Mahdi and Moebius, Jacob and Harun, Sulaiman Wadi and Abd Rahman, Noorsaadah and Madou, Marc and Ibrahim, Fatimah (2012) The effects of placement and geometry on thermo-pneumatic pumping on centrifugal microfluidic compact disc (CD) platforms. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Affandi, N.A.M. and Kamali, B. and Mz, R. and Tamin, N.M. and Hashim, Roslan (2010) Early growth and survival of Avicennia alba seedlings under excessive sedimentation. Scientific Research and Essays, 5 (18). pp. 2801-2805. ISSN 1992-2248

Afrasiab, M. and Faraji, G. and Tavakkoli, V. and Mashhadi, M.M. and Bushroa, A.R. (2014) Excellent energy absorption capacity of nanostructured Cu–Zn thin-walled tube. Materials Science and Engineering: A, 599. pp. 141-144. ISSN 0921-5093

Afshar, O. and Saidur, R. and Hasanuzzaman, M. and Jameel, M. (2012) A review of thermodynamics and heat transfer in solar refrigeration system. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5639-5648. ISSN 13640321

Afshar Ghotli, R. and Abdul Aziz, A.R. and Ibrahim, Shaliza and Baroutian, S. and Arami-Niya, A. (2013) Study of various curved-blade impeller geometries on power consumption in stirred vessel using response surface methodology. Journal of the Taiwan Institute of Chemical Engineers, 44 (2). pp. 192-201. ISSN 1876-1070

Afshar Ghotli, R. and Abdul Raman, A.A. and Ibrahim, S. (2016) The effect of various designs of six-curved blade impellers on reaction rate analysis in liquid–liquid mixing vessel. Measurement, 91. pp. 440-450. ISSN 0263-2241

Afshar Ghotli, R. and Abdul Raman, Abdul Aziz and Ibrahim, Shaliza and Baroutian, S. (2013) Liquid-liquid mixing in stirred vessels: a review. Chemical Engineering Communications, 200 (5). pp. 595-627. ISSN 0098-6445

Afshar-Mohajer, M. and Yaghoubi, A. and Ramesh, S. and Bushroa, A.R. and Chin, K.M.C. and Tin, C.C. and Chiu, W.S. (2014) Electrophoretic deposition of magnesium silicates on titanium implants: Ion migration and silicide interfaces. Applied Surface Science, 301. pp. 1-6. ISSN 0169-4332

Agamuthu, P. and Abioye, O.P. and Aziz, A.A. (2010) Phytoremediation of soil contaminated with used lubricating oil using Jatropha curcas. Journal of Hazardous Materials, 179 (1-3). pp. 891-894. ISSN 0360-3199

Agamuthu, P. and Ibrahim, S. (2001) Treatment of Carbide Sludge from an Acetylene Production Plant by Flocculation. Journal of Industrial Technology, 10 (1). pp. 73-84.

Agamuthu, P. and Kasapo, P. and Nordin, N.A.M. (2015) E-waste flow among selected institutions of higher learning using material flow analysis model. Resources Conservation and Recycling, 105 (A). pp. 177-185. ISSN 0921-3449

Aghajani Mir, M. and Taherei Ghazvinei, P. and Sulaiman, N.M.N. and Basri, N.E.A. and Saheri, S. and Mahmood, N.Z. and Jahan, A. and Begum, R.A. and Aghamohammadi, N. (2016) Application of TOPSIS and VIKOR improved versions in a multi criteria decision analysis to develop an optimized municipal solid waste management model. Journal of Environmental Management, 166. pp. 109-115. ISSN 0301-4797

Aghamohammadi, N. and Sulaiman, N.M.N. and Aroua, M.K. (2011) Combustion characteristics of biomass in SouthEast Asia. Biomass & Bioenergy, 35 (9). 3884-3890 . ISSN 0961-9534

Ahamed, J.U. and Bhuiya, M.M.K. and Saidur, Rahman and Masjuki, Haji Hassan and Sarkar, M.A.R. and Sayem, A.S.M. and Islam, M. (2010) Forced convection heat transfer performance of porous twisted tape insert. Engineering e-Transaction, 5 (2). pp. 67-79. ISSN 1823-6379

Ahamed, J.U. and Saidur, Rahman and Masjuki, Haji Hassan (2011) Prospect of hydrocarbon uses based on exergy analysis in the vapor compression refrigeration system. In: 2011 IEEE Conference on Clean Energy and Technology (CET), 27-29 June 2011, Kuala Lumpur.

Ahamed, Jamal Uddin and Madlool, N.A. and Saidur, Rahman and Shahinuddin, M.I. and Kamyar, A. and Masjuki, Haji Hassan (2012) Assessment of energy and exergy efficiencies of a grate clinker cooling system through the optimization of its operational parameters. Energy, 46 (1). pp. 664-674. ISSN 0360-5442

Ahamed, Jamal Uddin and Saidur, Rahman and Masjuki, Haji Hassan (2010) Thermodynamic performance analysis of R-600 and R-600a as refrigerant. Engineering e-Transaction, 5 (1). pp. 11-18. ISSN 1823-6379

Ahamed, Jamal Uddin and Saidur, Rahman and Masjuki, Haji Hassan (2011) A review on exergy analysis of vapor compression refrigeration system. Renewable and Sustainable Energy Reviews, 15 (3). pp. 1593-1600. ISSN 1364-0321

Ahamed, Jamal Uddin and Saidur, Rahman and Masjuki, Haji Hassan and Mekhilef, Saad and Ali, M.B. and Furqon, M.H. (2011) An application of energy and exergy analysis in agricultural sector of Malaysia. Energy Policy, 39 (12). pp. 7922-7929. ISSN 0301-4215

Ahamed, Jamal Uddin and Saidur, Rahman and Masjuki, Haji Hassan and Sattar, M.A. (2012) Energy and thermodynamic performance of LPG as an alternative refrigerant to R-134a in a domestic refrigerator. Energy Education Science and Technology Part A: Energy Science and Research, 29 (1). pp. 597-610. ISSN 1308-772X

Ahamed, Jamal Uddin and Saidur, Rahman and Masjuki, Haji Hassan and Sattar, M.A. (2012) An analysis of energy, exergy, and sustainable development of a vapor compression refrigeration system using hydrocarbon. International Journal of Green Energy, 9 (7). pp. 702-717. ISSN 1543-5075

Ahmad, A. and Razali, S.F.M. and Mohamed, Z.S. and El-Shafie, A. (2016) The Application of Artificial Bee Colony and Gravitational Search Algorithm in Reservoir Optimization. Water Resources Management, 30 (7). pp. 2497-2516. ISSN 0920-4741

Ahmad, Aminah and Cheng, Xiau San and Paul, Mukul Chandra and Dhar, Anirban and Das, Shyamal and Ahmad, Harith and Harun, Sulaiman Wadi (2019) Investigation of the Brillouin effect in highly nonlinear hafnium bismuth erbium doped fiber. Microwave and Optical Technology Letters, 61 (1). pp. 173-177. ISSN 0895-2477

Ahmad, Harith and Hassan, N.A. and Aidit, S.N. and Tiu, Zian Cheak (2016) Generation of tunable multi-wavelength EDFL by using graphene thin film as nonlinear medium and stabilizer. Optics & Laser Technology, 81. pp. 67-69. ISSN 0030-3992

Ahmad, Harith and San, Cheng Xiau and Harun, Sulaiman Wadi (2005) An enhanced S-band brillouin/erbium fiber laser with an additional EDFA in sub-loop. IEICE Electronics Express, 2 (10). pp. 321-326. ISSN 1349-2543

Ahmad, M.A. and Daud, W.M.A.W. and Aroua, M.K. (2008) Adsorption kinetics of various gases in carbon molecular sieves (CMS) produced from palm shell. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 312 (2-3). pp. 131-135. ISSN 0927-7757

Ahmad, M.A. and Daud, W.M.A.W. and Aroua, M.K. (2008) CO(2)/CH(4) and O(2)/N(2) kinetic selectivities of oil palm shell-based carbon molecular sieves. Journal of Oil Palm Research, 20. pp. 453-460. ISSN 1511-2780

Ahmad, M.A. and Daud, W.M.A.W. and Aroua, M.K. (2007) Synthesis of carbon molecular sieves from palm shell by carbon vapor deposition. Journal of Porous Materials, 14 (4). pp. 393-399. ISSN 1380-2224

Ahmad, M.A. and Ma Wan Daud, W. and Aroua, M.K. (2008) C02/Ch4 And 02/N2 kinetic selectivities of oil palm shell-based carbon molecular sieves. Journal of Oil Palm Research, 20 (JUNE). pp. 453-460. ISSN 15112780

Ahmad, M.S. and Pandey, A.K. and Rahim, N.A. (2017) Advancements in the development of TiO 2 photoanodes and its fabrication methods for dye sensitized solar cell (DSSC) applications. A review. Renewable & Sustainable Energy Reviews, 77. pp. 89-108. ISSN 1364-0321

Ahmad, N. and Taha, Z. and Ujihashi, S. and Tanaka, K. (2009) An experimental study of the impact of a sepak takraw ball on a flat surface. In: 4th Asia-Pacific Congress on Sports Technology 2009, 21-23 Sep 2009, Honolulu,Hawaii.

Ahmad, P. and Khandaker, Mayeen Uddin and Amin, Yusoff Mohd and Khan, G. and Ramay, S.M. and Mahmood, A. and Amin, M. and Muhammad, N. (2016) Catalytic growth of vertically aligned neutron sensitive 10Boron nitride nanotubes. Journal of Nanoparticle Research, 18. p. 25. ISSN 1388-0764

Ahmad, R. and Jamaluddin, H. and Hussain, M.A. (2008) Application of memetic algorithm in modelling discrete-time multivariable dynamics systems. Mechanical Systems and Signal Processing, 22 (7). pp. 1595-1609. ISSN 0888-3270

Ahmad, R. and Jamaluddin, H. and Hussain, M.A. (2004) Model structure selection for a discrete-time non-linear system using a genetic algorithm. Proceedings of the Institution of Mechanical Engineers Part I-Journal of Systems and Control Engineering, 218 (I2). pp. 85-98. ISSN 0959-6518

Ahmad, R. and Jamaluddin, H. and Hussain, M.A. (2002) Multivariable system identification for dynamic discrete-time nonlinear system using genetic algorithm. In: 2002 IEEE International Conference on Systems, Man and Cybernetics, 2002, Yasmine Hammamet.

Ahmad, S. and M.A., H. and Sabri, M.F. and Navid, M. (2012) Comparative simulation study of gas-phase propylene polymerization in fluidized bed reactors using aspen polymers and two phase models. Chemical Industry and Chemical Engineering Quarterly (00). p. 38. ISSN 1451-9372

Ahmad , S. and Wei, H.L. and Roslan, H. (2012) Site selection for the tidal current turbine (TCT)in the Straits of Malacca. In: 2nd Conference for Regional Cooperation in Ocean and Earth Science Research in the South China Sea, 21-24 October 2012, University of Malaya, Kuala Lumpur, Malaysia.

Ahmadinia, E. and Zargar, M. and Karim, M.R. and Abdelaziz, M. and Ahmadinia, E. (2012) Performance evaluation of utilization of waste Polyethylene Terephthalate (PET) in stone mastic asphalt. Construction and Building Materials, 36. pp. 984-989. ISSN 09500618

Ahmadinia, E. and Zargar, M. and Karim, M.R. and Abdelaziz, M. and Shafigh, P. (2011) Using waste plastic bottles as additive for stone mastic asphalt. Materials & Design, 32 (10). pp. 4844-4849. ISSN 0261-3069

Ahmady, A. and Hashim, M.A. and Aroua, M.K. (2011) Absorption of carbon dioxide in the aqueous mixtures of methyldiethanolamine with three types of imidazolium-based ionic liquids. Fluid Phase Equilibria, 309 (1). pp. 76-82. ISSN 0378-3812

Ahmady, A. and Hashim, M.A. and Aroua, M.K. (2011) Density, viscosity, physical solubility and diffusivity of CO 2 in aqueous MDEA+bmimBF 4 solutions from 303 to 333K. Chemical Engineering Journal, 172 (2-3). pp. 763-770. ISSN 1385-8947

Ahmady, A. and Hashim, M.A. and Aroua, M.K. (2012) Kinetics of carbon dioxide absorption into aqueous MDEA+bmimBF 4 solutions from 303 to 333K. Chemical Engineering Journal, 200-20. pp. 317-328. ISSN 1385-8947

Ahmady, A. and Hashim, M.A. and Aroua, Mohamed Kheireddine (2010) Experimental investigation on the solubility and initial rate of absorption of CO2 in aqueous mixtures of methyldiethanolamine with the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate. Journal of Chemical and Engineering Data, 55 (12). pp. 5733-5738. ISSN 0021-9568

Ahmady, Afshin and Shamiri, Ahmad and Hashim, Mohd Ali and Aroua, Mohamed Kheireddine (2013) Vapor pressure of aqueous methyldiethanolamine mixed with ionic liquids. Journal of the Taiwan Institute of Chemical Engineers, 45 (2). pp. 380-386. ISSN 1876-1070

Ahmed, M. and Mekhilef, S. (2008) A three-phase three-level voltage source inverter with a three-phase two-level inverter as a main circuit. In: 4th IET International Conference on Power Electronics, Machines and Drives, PEMD 2008, York.

Ahmed, M.E. and Mekhilef, S. (2009) Design and implementation of a multi level three-phase inverter with less switches and low qutput voltage distortion. Journal of Power Electronics, 9 (4). pp. 593-603. ISSN 15982092

Ahmed, M.E. and Mekhilef, S. (2008) Three-phase three-level nine switches inverter employing space vector modulation. In: 2008 12th International Middle East Power System Conference, MEPCON 2008, Aswan.

Ahmed, R. and Rifat, A.A. and Sabouri, A. and Al-Qattan, B. and Essa, K. and Butt, H. (2016) Multimode waveguide based directional coupler. Optics Communications, 370. pp. 183-191. ISSN 0030-4018

Ahmed, R. and Rifat, A.A. and Yetisen, A.K. and Dai, Q. and Yun, S.H. and Butt, H. (2016) Multiwall carbon nanotube microcavity arrays. Journal of Applied Physics, 119 (11). p. 113105. ISSN 0021-8979

Ahmed, R.A. and Mekhilef, S. and Ping, H.W. (2012) Asymmetrical multilevel inverter topology with reduced number of switches. International Review of Electrical Engineering, 7 (4). pp. 4761-4767. ISSN 18276660

Ahmed, R.A. and Mekhilef, S. and Ping, H.W. (2010) New multilevel inverter topology with minimum number of switches. In: 2010 IEEE Region 10 Conference, TENCON 2010, Fukuoka.

Ahmed, R.A. and Mekhilef, S. and Ping, H.W. (2009) A three-Phase shunt active power filter with unified constant frequency integration control with RLC connection circuit. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009.

Ahmed, Shafaat and Haseeb, A.S. Md. Abdul and Kurny, A.S.W. (2007) Study of the wear behaviour of Al–4.5% Cu–3.4% Fe in situ composite: Effect of thermal and mechanical processing. Journal of Materials Processing Technology, 182 (1-3). pp. 327-332. ISSN 0924-0136

Ahmed, T. and Mekhilef, S. (2015) Semi-Z-source inverter topology for grid-connected photovoltaic system. IET Power Electronics, 8 (1). pp. 63-75. ISSN 1755-4535

Ahmed, Y.M. and Al-Mamun, A. and Jameel, A.T. and AlKhatib, M.F.R. and Amosa, M.K. and AlSaadi, M.A. (2016) Synthesis and Characterization of Carbon Nanofibers Grown on Powdered Activated Carbon. Journal of Nanotechnology, 2016. pp. 1-10. ISSN 1687-9503

Ahmmad, R. and Jumaat, M.Z. and Alengaram, U.J. and Bahri, S. and Rehman, M.A. and Hashim, H. (2016) Performance evaluation of palm oil clinker as coarse aggregate in high strength lightweight concrete. Journal of Cleaner Production, 112 (Part 1). pp. 566-574. ISSN 0959-6526

Ahsan, M.R. and Islam, M.T. and Ullah, M.H. and Arshad, H. and Ali, M.T. (2015) Miniature size multiband planar patch antenna fabricated on a bioplastic substrate. Bulletin of the Polish Academy of Sciences Technical Sciences, 63 (4). pp. 971-976. ISSN 0239-7528

Ahsan, Q. and Haseeb, A.S. Md. Abdul and Haque, E. and Celis, Jean Pierre (2003) Wear failure of a leaded bronze bearing: correlation between plant experience and laboratory wear test data. Journal of Materials Engineering and Performance, 12 (3). pp. 304-311. ISSN 1059-9495

Aishah, A.B. (2015) Reinstating the soul in engineering laboratory work: Direct observation assessment method. In: International Conference on Engineering Education and Research 2015, 19-21 December 2015, Madinah, Kingdom of Saudi Arabia.

Ajeel, M.A. and Aroua, M.K. and Daud, Wan Mohd Ashri Wan (2015) P-Benzoquinone anodic degradation by carbon black diamond composite electrodes. Electrochimica Acta, 169. pp. 46-51. ISSN 0013-4686

Akbari, V. and Borhani, T.N.G. and Shamiri, A. and Aramesh, R. and Hussain, M.A. and Abd Hamid, M.K. (2015) 2D CFD-PBM simulation of hydrodynamic and particle growth in an industrial gas phase fluidized bed polymerization reactor. Chemical Engineering Research & Design, 104. pp. 53-67. ISSN 0263-8762

Akhbari, Azam and Ibrahim, Shaliza and Zinatizadeh, Ali Akbar and Bonakdari, Hossein and Ebtehaj, Isa and S. Khozani, Zohre and Vafaeifard, Mohsen and Gharabaghi, Bahram (2018) Evolutionary Prediction of Biohydrogen Production by Dark Fermentation. CLEAN - Soil, Air, Water, 47 (1). p. 1700494. ISSN 1863-0650

Akib, S. and Fayyadh, M.M. and Razak, H.A. (2010) Review of bridge vibration and future direction. In: 17th International Congress on Sound and Vibration 2010, ICSV 2010, 2010.

Akib, S. and Othman, F. and Sholichin, M. (2011) Influence of flow shallowness on scour depth at semi-integral bridge piers. In: International Conference on Civil Engineering, Architecture and Building Materials (CEABM 2011), 18-20 June 2011, Haikou, China. (Submitted)

Akikur, R.K. and Saidur, R. and Ullah, K.R. and Hajimolana, S.A. and Ping, H.W. and Hussain, M.A. (2016) Economic feasibility analysis of a solar energy and solid oxide fuel cell-based cogeneration system in Malaysia. Clean Technologies and Environmental Policy, 18 (3). pp. 669-687. ISSN 1618-954X

Akter, M.P. and Mekhilef, S. and Tan, N.M.L. and Akagi, H. (2015) Stability and performance investigations of model predictive controlled active-front-end (AFE) rectifiers for energy storage systems. Journal of Power Electronics, 15 (1). pp. 202-215. ISSN 1598-2092

Al Khatib, Basem and Yap, Soon Poh and El-Shafie, Ahmed (2018) Delay Factors in Reconstruction Projects: A Case Study of Mataf Expansion Project. Sustainability, 10 (12). p. 4772. ISSN 2071-1050

Al Mamun, A. and Ahmed, Y.M. and AlKhatib, M.F.R. and Jameel, A.T. and AlSaadit, M. (2015) Lead sorption by carbon nanofibers grown on powdered activated carbon - kinetics and equilibrium. Nano, 10 (2). p. 8. ISSN 1793-2920

Al-Dabbagh, R.D. and Baba, M.S. and Mekhilef, S. and Kinsheel, A. (2012) The compact genetic algorithm for likelihood estimator of first order moving average model. In: 2012 2nd International Conference on Digital Information and Communication Technology and its Applications, DICTAP 2012, Bangkok.

Al-Fakih, E. and Abu Osman, Noor Azuan and Adikan, Faisal Rafiq Mahamd (2012) The sse of fiber bragg grating sensors in biomechanics and rehabilitation applications: the state-of-the-art and ongoing research topics. Sensors, 12 (10). pp. 12890-12926. ISSN 1424-8220

Al-Faqheri, W. and Ibrahim, F. and Thio, T.H.G. and Arof, Hamzah and Madou, M. (2013) Novel liquid equilibrium valving on centrifugal microfluidic CD platform. In: 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2013, 2013, Osaka.

Al-Faqheri, W. and Ibrahim, Fatimah and Thio, T.H.G. and Aeinehvand, M.M. and Arof, Hamzah and Madou, M. (2015) Development of novel passive check valves for the microfluidic CD platfor. Sensors and Actuators A: Physical, 222. pp. 245-254. ISSN 0924-4247

Al-Faqheri, W. and Ibrahim, Fatimah and Thio, T.H.G. and Bahari, N. and Arof, Hamzah and Rothan, Hussin A. and Yusof, Rohana and Madou, M. (2015) Development of a passive liquid valve (PLV) utilizing a pressure equilibrium phenomenon on the centrifugal microfluidic platform. Sensors, 15 (3). pp. 4658-4676. ISSN 1424-8220

Al-Faqheri, W. and Ibrahim, Fatimah and Thio, T.H.G. and Moebius, J. and Joseph, K. and Arof, Hamzah and Madou, M. (2013) Vacuum/compression valving (VCV) using parrafin-wax on a centrifugal microfluidic CD platform. PLoS ONE, 8 (3). ISSN 1932-6203

Al-Faqheri, Wisam and Ibrahim, Fatimah and Thio, Tzer Hwai Gilbert and Moebius, Jacob and Joseph, Karunan and Arof, Hamzah and Madou, Marc (2013) Vacuum/Compression Valving (VCV) using parrafin-wax on a centrifugal microfluidic CD platform. PLoS ONE, 8 (3). e58523. ISSN 1932-6203

Al-Fatlawi, A.W.A. and Rahim, N.A. and Saidur, R. and Ward, T.A. (2015) Improving solar energy prediction in complex topography using artificial neural networks: Case study Peninsular Malaysia. Environmental Progress & Sustainable Energy, 34 (5). pp. 1528-1535. ISSN 1944-7442

Al-Hamadani, Y.A.J. and Chu, K.H. and Son, A. and Heo, J. and Her, N. and Jang, Min and Park, C.M. and Yoon, Y. (2015) Stabilization and dispersion of carbon nanomaterials in aqueous solutions: A review. Separation and Purification Technology, 156 (2). pp. 861-874. ISSN 1383-5866

Al-Kubaisy, M.A. and Jumaat, M.Z. (2000) Ferrocement laminate strengthens RC beams. Concrete International, 22 (10). pp. 37-43. ISSN 0162-4075

Al-Kubaisy, M.A. and Jumaat, M.Z. (2000) Flexural behaviour of reinforced concrete slabs with ferrocement tension zone cover. Construction and Building Materials, 14 (5). pp. 245-252. ISSN 0950-0618

Al-Mansob, R.A. and Ismail, A. and Yusoff, N.I.M. and Albrka, S.I. and Azhari, C.H. and Karim, M.R. (2016) Rheological characteristics of unaged and aged epoxidised natural rubber modified asphalt. Construction and Building Materials, 102 (Part 1). pp. 190-199. ISSN 0950-0618

Al-Mansob, R.A. and Ismail, A. and Yusoff, N.I.M. and Rahmat, R.A.O.K. and Borhan, M.N. and Albrka, S.I. and Azhari, C.H. and Karim, M.R. (2017) Engineering characterisation of epoxidized natural rubber-modified hot-mix asphalt. PLoS ONE, 12 (2). e0171648. ISSN 1932-6203

Al-Obaidi, S.M.A. and Salman Leong, M. and Raja Hamzah, R.I. and Abdelrhman, A.M. and Danaee, M. (2016) Acoustic emission parameters evaluation in machinery condition monitoring by using the concept of multivariate analysis. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7507-7514. ISSN 1819-6608

Al-Qazwini, Y. and Noor, A.S.M. and Al-Qazwini, Z. and Yaacob, M.H. and Harun, Sulaiman Wadi and Mahdi, M.A. (2016) Refractive index sensor based on SPR in symmetrically etched plastic optical fibers. Sensors and Actuators A: Physical, 246. pp. 163-169. ISSN 0924-4247

Al-Qazwini, Yusser and Noor, A.S.M. and Yaacob, M.H. and Harun, Sulaiman Wadi and Mahdi, M.A. (2015) Experimental realization and performance evaluation of refractive index SPR sensor based on unmasked short tapered multimode-fiber operating in aqueous environments. Sensors and Actuators A: Physical, 236. pp. 38-43. ISSN 0924-4247

Al-Wazzan, A. and Than, C.F. and Moghavvemi, M. and Yew, C.W. (2001) Video imaging measurement of interfacial wave velocity in air-water flow through a horizontal elbow. In: Proceedings of SPIE - The International Society for Optical Engineering, Photonic Systems and Applications, 27 -30 November 2001, Singapore.

Al-Zuhair, S. and Ramachandran, K.B. and Farid, M. and Aroua, M.K. and Vadlani, P. and Ramakrishnan, S. and Gardossi, L. (2011) Enzymes in biofuels production. Enzyme Research, 2011 (1). p. 658263. ISSN 2090-0414

Al-maqtari, M.T. and Taha, Z. and Moghavvemi, M. (2009) Steady state-VEP based BCI for control gripping of a Robotic hand. In: International Conference for Technical Postgraduates, TECHPOS 2009, 14-15 December 2009, Kuala Lumpur, Malaysia.

AlOmar, M.K. and AlSaadi, M.A. and Akib, S. and Hayyan, M. and Hashim, M.A. (2016) Functionalization of CNTs surface with phosphonuim based deep eutectic solvents for arsenic removal from water. Applied Surface Science, 389. pp. 216-226. ISSN 0169-4332

AlOmar, M.K. and AlSaadi, M.A. and Hayyan, M. and Akib, S. and Ibrahim, R.K. and Hashim, M.A. (2016) Lead removal from water by choline chloride based deep eutectic solvents functionalized carbon nanotubes. Journal of Molecular Liquids, 222. pp. 883-894. ISSN 0167-7322

AlOmar, M.K. and Hayyan, M. and AlSaadi, M.A. and Akib, S. and Hayyan, A. and Hashim, M.A. (2016) Glycerol-based deep eutectic solvents: Physical properties. Journal of Molecular Liquids, 215. pp. 98-103. ISSN 0167-7322

AlSaadi, M.A. and Al Mamun, A. and Alam, M.Z. and Amosa, M.K. and Atieh, M.A. (2016) Removal of Cadmium from Water by CNT-PAC Composite: Effect of Functionalization. NANO (nano), 11 (1). p. 1650011. ISSN 1793-2920

Alam, A. and Jumaat, M.Z. (2009) Effects of intermediate anchors on end anchored carbon fibre reinforced polymer laminate flexurally strengthened reinforced concrete beams. Journal of Applied Sciences, 9 (1). pp. 142-148. ISSN 18125654

Alam, A. and Jumaat, M.Z. (2008) "Experimental and analytical investigations on the structural behavoiur of steel plate and cfrp laminate flexurally strengthened r.c. beams". Journal of Applied Sciences, 8 (23). 4383-4389. ISSN 1812-5654

Alam, M. and Choudhury, I.A. and Azuddin, M. (2014) Mechanism and Design Analysis of Articulated Ankle Foot Orthoses for Drop-Foot. Scientific World Journal, 2014. pp. 1-14. ISSN 2356-6140

Alam, M. and Hussain, R.R. and Islam, A.B.M.S. (2016) Impact assessment of rainfall-vegetation on sedimentation and predicting erosion-prone region by GIS and RS. Geomatics, Natural Hazards and Risk, 7 (2). pp. 667-679. ISSN 1947-5705

Alam, M.A. and Alriyami, K. and Muda, Z.C. and Jumaat, M.Z. (2016) Hybrid kenaf fibre composite plates for potential application in shear strengthening of reinforced concrete structure. Indian Journal of Science and Technology, 9 (6). pp. 1-7. ISSN 0974-6846

Alam, M.A. and Jumaat, M.Z. (2009) Eliminating premature end peeling of flexurally strengthened reinforced concrete beams. Journal of Applied Sciences, 9 (6). pp. 1106-1113. ISSN 18125654

Alam, M.A. and Jumaat, M.Z. (2012) Experimental investigations on U- and L-shaped end anchored CFRP laminate strengthened reinforced concrete beams. Arabian Journal for Science and Engineering, 37 (4). pp. 905-919. ISSN 1319-8025

Alam, M.A. and Jumaat, M.Z. (2015) Prevention of debonding failure of intermediate anchor to eliminate premature shear failure of flexurally strengthened reinforced concrete beams. Arabian Journal for Science and Engineering, 40 (8). pp. 2219-2232. ISSN 1319-8025

Alam, M.G.R. and Haw, R. and Kim, S.S. and Azad, A.K. and Abedin, S.F. and Hong, C.S. (2016) EM-Psychiatry: An Ambient Intelligent System for Psychiatric Emergency. IEEE Transactions on Industrial Informatics, 12 (6). pp. 2321-2330. ISSN 1551-3203

Alam, Md. Ohidul and Haseeb, A.S. Md. Abdul (2002) Response of Ti-6Al-4V and Ti-24Al-11Nb alloys to dry sliding wear against hardened steel. Tribology International, 35 (6). pp. 357-362. ISSN 0301-679X

Alamolhoda, F. and Shamiri, A. and Hussain, M.A. and Sotudeh-Gharebagh, R. and Mostoufi, N. (2015) Early detection of agglomeration in a polyethylene fluidized bed at high temperature and pressure by vibration signature analysis. Chemical Engineering Research & Design, 104. pp. 156-163. ISSN 0263-8762

Alawiah, A. and Bauk, S. and Marashdeh, M.W. and Ng, K.S. and Abdul-Rashid, H.A. and Yusoff, Z. and Gieszczyk, W. and Noramaliza, M.N. and Mahdiraji, G.A. and Tamchek, N. and Muhd-Yassin, S.Z. and Mat-Sharif, K.A. and Zulkifli, M.I. and Maah, M.J. and Omar, S.S.C. and Bradley, D.A. (2015) Thermoluminescence glow curves and deconvoluted glow peaks of Ge doped flat fibers at ultra-high doses of electron radiation. Radiation Physics and Chemistry, 113. pp. 53-58. ISSN 0969-806X

Ale Ebrahim, N. and Ahmed, S. and Abdul Rashid, S.H. and Taha, Z. and Mohammadjafari, M. (2012) Process construct in the virtual R&D teams. Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2012. pp. 1822-1828.

Alengaram, U.J. and Jumaat, M.Z. and Mahmud, H. (2008) Ductility behaviour of reinforced palm kernel shell concrete beams. European Journal of Scientific Research, 23 (3). pp. 406-420. ISSN 1450216X

Alengaram, U.J. and Jumaat, M.Z. and Mahmud, H. (2008) Influence of cementitious materials and aggregates content on compressive strength of palm kernel shell concrete. Journal of Applied Sciences, 8 (18). pp. 3207-3213. ISSN 18125654

Alengaram, U.J. and Jumaat, M.Z. and Mahmud, H. (2009) Structural behaviour of reinforced palm kernel shell foamed concrete beams. In: Proceedings of the Fifth International Structural Engineering and Construction Conference, 22-25 Sept 2009, Las Vegas, USA.

Alengaram, U.J. and Mahmud, H. and Jumaat, M.Z. (2010) Development of lightweight concrete using industrial waste material, palm kernel shell as lightweight aggregate and its properties. In: Chemical, Biological and Environmental Engineering (ICBEE), 2010 2nd International Conference on.

Alengaram, U.J. and Mahmud, H.B. and Jumaat, M.Z. (2011) Enhancement and prediction of modulus of elasticity of palm kernel shell concrete. Materials & Design, 32 (4). pp. 2143-2148. ISSN 0261-3069

Alengaram, U.J. and Mohottige, N.H.W. and Wu, C. and Jumaat, M.Z. and Yap, S.P. and Wang, Z. (2016) Response of oil palm shell concrete slabs subjected to quasi-static and blast loads. Construction and Building Materials, 116. pp. 391-402. ISSN 0950-0618

Alengaram, U.J. and Muhit, B.A.A and Jumaat, M.Z. (2013) Utilization of oil palm kernel shell as lightweight aggregate in concrete - a review. Construction and Building Materials, 38. pp. 161-172. ISSN 09500618

Alengaram, Ubagaram Johnson and Mahmud, Hilmi and Jumaat, M.Z. (2010) Comparison of mechanical and bond properties of oil palm kernel shell concrete with normal weight concrete. International Journal of the Physical Sciences, 5 (8). pp. 1231-1239. ISSN 1992-1950

Alengaram, Ubagaram Johnson and Mahmud, Hilmi and Jumaat, M.Z. and Shirazi, S.M. (2010) Effect of aggregate size and proportion on strength properties of palm kernel shell concrete. International Journal of the Physical Sciences, 5 (12). pp. 1848-1856. ISSN 1992-1950

Alhalawani, A.M.F. and Rodriguez, O. and Curran, D.J. and Co, R. and Kieran, S. and Arshad, S. and Keenan, T.J. and Wren, A.W. and Crasto, G. and Peel, S.A.F. and Towler, M.R. (2015) A glass polyalkenoate cement carrier for bone morphogenetic proteins. Journal of Materials Science-Materials in Medicine, 26 (3). p. 151. ISSN 0957-4530

Alhalawani, A.M.F. and Towler, M.R. (2016) The effect of ZnO 虠 Ta2O5 substitution on the structural and thermal properties of SiO2-ZnO-SrO-CaO-P2O5 glasses. Materials Characterization, 114. pp. 218-224. ISSN 1044-5803

Ali, A.H. and Mashaan, N.S. and Karim, M.R. (2013) Investigations of physical and rheological properties of aged rubberised bitumen. Advances in Materials Science and Engineering, 2013. pp. 1-7. ISSN 1687-6822

Ali, A.S. (2013) The effect of design knowledge towards the performance of refurbishment projects in Malaysia. In: International Conference on Engineering Education 2013, 22-25 Dec 2013, Madinah, Kingdom of Saudi Arabia.

Ali, Azlan-Shah and Kamaruzzaman, S.N. and Zulkiflee, Abdul-Samad and Pitt, M.R. (2010) A study of design performance of refurbishment projects in Malaysia. Journal of Asian Architecture and Building Engineering , 9 (2). pp. 323-329.

Ali, B.S. and Ali, B.H. and Yusoff, R. and Aroua, M.K. (2012) Carbon steel corrosion behaviors in carbonated aqueous mixtures of monoethanolamine and 1-n-butyl-3-methylimidazolium tetrafluoroborate. International Journal of Electrochemical Science, 7 (5). pp. 3835-3853. ISSN 1452-3981

Ali, B.S. and Aroua, M.K. (2004) Effect of piperazine on CO2 loading in aqueous solutions of MDEA at low pressure. International Journal of Thermophysics, 25 (6). pp. 1863-1870. ISSN 0195-928X

Ali, F. and Bhuiyan, M.Z.I. and Hai, L.C. (2010) Finite element analysis of an anchored reinforced earth wall under slope surcharge. In: World Engineering Congress 2010 Conference on Buildings and Infrastructure Technology, 02-05 Aug 2010, Kuching, Sarawak.

Ali, F. and Islam Bhuiyan, M.Z. and Salman, F.A. and Sang, S.L. (2011) Frictional performance of infilled I-blocks with geosynthetic inclusions. In: International Conference on Geotechnique, Construction Materials and Environment, 21-23 Nov 2011, Mie, Japan.

Ali, F.H. and Hashim, Roslan (1991) A road embankment on soft clay: field behaviour and prediction. Computer methods and advances in geomechanics. Proc. 7th international conference, Cairns, 1991. Vol. 2. pp. 943-948.

Ali, F.H. and Sing, W.L. and Hashim, Roslan (2010) Engineering properties of improved fibrous peat. Scientific Research and Essays, 5 (2). pp. 154-169. ISSN 1992-2248

Ali, M. and Soin, N. and Noorakma, A.C.W. and Yusof, N. and Hatta, S.F.W.M. (2016) Design and analysis of MEMS high sensitive capacitive pressure sensor. Journal of Engineering and Applied Sciences, 11 (12). pp. 2688-2692. ISSN 1816-949X

Ali, M.B. and Saidur, R. and Hasanuzzaman, M. and Ward, T.A. (2012) Energy and emission analysis in the malaysian food industries. Environmental Progress and Sustainable Energy, 27 (4). n/a-n/a. ISSN 1944-7450

Ali, M.B. and Saidur, R. and Hossain, M.S. (2011) A review on emission analysis in cement industries. Renewable and Sustainable Energy Reviews, 15 (5). pp. 2252-2261. ISSN 1364-0321

Ali, M.S. and Abu Bakar, A.H. and Mokhlis, Hazlie and Arof, Hamzah and Illias, Hazlee Azil and Aman, M.M. (2012) High impedance fault localization in a distribution network using the discrete wavelet transform. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Ali, M.S. and Bakar, Ab Halim Abu and Mokhlis, Hazlie and Arof, Hamzah and Illias, Hazlee Azil (2014) High-impedance fault location using matching technique and wavelet transform for underground cable distribution network. IEEJ Transactions on Electrical and Electronic Engineering, 9 (2). pp. 176-182. ISSN 1931-4973

Ali, Md. Eaqub and Amin, Md. Al and Razzak, Md. Abdur and Hamid, Sharifah Bee Abd and Rahman, M.M. and Abdul Rashid, Nur Raifana and -, Asing (2016) Short Amplicon-Length PCR Assay Targeting Mitochondrial Cytochrome b Gene for the Detection of Feline Meats in Burger Formulation. Food Analytical Methods, 9 (3). pp. 571-581. ISSN 1936-9751

Ali, O.M. and Mamat, R. and Masjuki, Haji Hassan and Abdullah, A.A. (2016) Analysis of blended fuel properties and cycle-to-cycle variation in a diesel engine with a diethyl ether additive. Energy Conversion and Management, 108. pp. 511-519. ISSN 0196-8904

Ali, S. and Abu Osman, Noor Azuan and Eshraghi, A. and Gholizadeh, H. and Abd Razak, N.A.B. and Wan Abas, Wan Abu Bakar (2013) Interface pressure in transtibial socket during ascent and descent on stairs and its effect on patient satisfaction. Clinical Biomechanics, 28 (9-10). pp. 994-999. ISSN 02680033

Ali, S. and Abu Osman, Noor Azuan and Mortaza, N. and Eshraghi, A. and Gholizadeh, H. and Wan Abas, Wan Abu Bakar (2012) Clinical investigation of the interface pressure in the trans-tibial socket with Dermo and Seal-In X5 liner during walking and their effect on patient satisfaction. Clinical Biomechanics, 27 (9). pp. 943-948. ISSN 0268-0033

Ali, S. and Osman, N.A.A. and Naqshbandi, M.M. and Eshraghi, A. and Kamyab, M. and Gholizadeh, H. (2012) Qualitative study of prosthetic suspension systems on individuals with transtibial amputations aatisfaction and perceived problems with their prosthetic devices. Archives of Physical Medicine and Rehabilitation, 93 (11). pp. 1919-1923. ISSN 0003-9993

Ali, S.T. and Gazeau, J.P. and Karim, M.R. (1996) Frames, the beta-duality in Minkowski space and spin coherent states. Journal of Physics a-Mathematical and General, 29 (17). pp. 5529-5549. ISSN 0305-4470

Alias, A. and Rahim, N.A. and Hussain, M.A. (2011) Bidirectional three phase power converter. In: 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011, 2011, Kuala Lumpur.

Alias, N.A. and Majid, S.R. and Arof, Abdul Kariem (2009) Structural and conductivity studies of Li4TisOl2. In: National Workshop on Functional Materials 2009, 16 June 2009, Centre for Ionics,University of Malaya.

Allawi, Mohammed Falah and El-Shafie, Ahmed (2016) Utilizing RBF-NN and ANFIS Methods for Multi-Lead ahead Prediction Model of Evaporation from Reservoir. Water Resources Management, 30 (13). pp. 4773-4788. ISSN 0920-4741

Allawi, Mohammed Falah and Jaafar, Othman and Mohamad Hamzah, Firdaus and El-Shafie, Ahmed (2019) Novel reservoir system simulation procedure for gap minimization between water supply and demand. Journal of Cleaner Production, 206. pp. 928-943. ISSN 0959-6526

Allawi, Mohammed Falah and Jaafar, Othman and Mohamad Hamzah, Firdaus and Koting, Suhana and Mohd, Nuruol Syuhadaa and El-Shafie, Ahmed (2019) Forecasting hydrological parameters for reservoir system utilizing artificial intelligent models and exploring their influence on operation performance. Knowledge-Based Systems, 163. pp. 907-926. ISSN 0950-7051

Almasi, M.H. and Sadollah, A. and Kang, S. and Karim, M.R. (2016) Optimization of an improved intermodal transit model equipped with feeder bus and railway systems using metaheuristics approaches. Sustainability, 8 (6). p. 537. ISSN 2071-1050

Almurib, H.A.F. and Askari, M. and Moghavvemi, M. (2010) Hard constraints explicit model predictive control of an inverted pendulum. In: 2010 1st International Conference on Energy, Power and Control, EPC-IQ01 2010, 30 November-2 December 2010, Basrah, Iraq.

Almurib, H.A.F. and Askari, M. and Moghavvemi, M. (2011) Model predictive control of quadruple tanks system. In: 50th Annual Conference on Society of Instrument and Control Engineers, SICE 2011, 13-18 September 2011, Tokyo, Japan.

Almurib, H.A.F. and Hassan, L.H. and Moghavvemi, M. (2011) Design of robust power system stabilizers for Iraqi power network. In: 50th Annual Conference on Society of Instrument and Control Engineers, SICE 2011, 13-18 September 2011, Tokyo, Japan.

Alnahhal, M.F. and Alengaram, U.J. and Jumaat, M.Z. and Alqedra, M.A. and Mo, K.H. and Sumesh, M. (2017) Evaluation of Industrial By-Products as Sustainable Pozzolanic Materials in Recycled Aggregate Concrete. Sustainability, 9 (5). p. 767. ISSN 2071-1050

Alsubari, B. and Shafigh, P. and Jumaat, M.Z. (2015) Development of self-consolidating high strength concrete incorporating treated palm oil fuel ash. Materials, 8 (5). pp. 2154-2173. ISSN 1996-1944

Alsubari, B. and Shafigh, P. and Jumaat, M.Z. (2016) Utilization of high-volume treated palm oil fuel ash to produce sustainable self-compacting concrete. Journal of Cleaner Production, 137. pp. 982-996. ISSN 0959-6526

Alwahib, A.A. and Sadrolhosseini, A.R. and An'amt, M.N. and Lim, H.N. and Yaacob, M.H. and Abu Bakar, M.H. and Ming, H.N. and Mahdi, M.A. (2016) Reduced Graphene Oxide/Maghemite Nanocomposite for Detection of Hydrocarbon Vapor Using Surface Plasmon Resonance. IEEE Photonics Journal, 8 (4). p. 7486990. ISSN 1943-0655

Aman, M.M. and Jasmon, G. and Mokhlis, H. and Khan, Q.A. and Bakar, A.H.A. and Karimi, M. (2012) Modeling and simulation of digital frequency relay for generator protection. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Aman, M.M. and Jasmon, G.B. and Bakar, A.H.A. and Mokhlis, H. (2012) Optimum capacitor placement and sizing for distribution system based on an improved voltage stability index. International Review of Electrical Engineering-Iree, 7 (3). pp. 4622-4630. ISSN 1827-6660

Aman, M.M. and Jasmon, G.B. and Bakar, A.H.A. and Mokhlis, H. (2014) Optimum network reconfiguration based on maximization of system loadability using continuation power flow theorem. International Journal of Electrical Power & Energy Systems, 54. pp. 123-133. ISSN 0142-0615

Aman, M.M. and Jasmon, G.B. and Bakar, A.H.A. and Mokhlis, H. (2013) A new approach for optimum DG placement and sizing based on voltage stability maximization and minimization of power losses. Energy Conversion and Management, 70. pp. 202-210. ISSN 0196-8904

Aman, M.M. and Jasmon, G.B. and Bakar, A.H.A. and Mokhlis, H. (2014) A new approach for optimum simultaneous multi-DG distributed generation Units placement and sizing based on maximization of system loadability using HPSO (hybrid particle swarm optimization) algorithm. Energy, 66. pp. 202-215. ISSN 0360-5442

Aman, M.M. and Jasmon, G.B. and Bakar, A.H.A. and Mokhlis, H. and Karimi, M. (2014) Optimum shunt capacitor placement in distribution system—A review and comparative study. Renewable and Sustainable Energy Reviews, 30. pp. 429-439. ISSN 1364-0321

Aman, M.M. and Jasmon, G.B. and Ghufran, A. and Bakar, A.H.A. and Mokhlis, H. (2013) Investigating possible wind energy potential to meet the power shortage in Karachi. Renewable & Sustainable Energy Reviews, 18. pp. 528-542. ISSN 1364-0321

Aman, M.M. and Jasmon, G.B. and Mokhlis, H. and Bakar, A.H.A. (2013) Analysis of the performance of domestic lighting lamps. Energy Policy, 52. pp. 482-500. ISSN 0301-4215

Aman, M.M. and Jasmon, G.B. and Mokhlis, H. and Bakar, A.H.A. (2012) Analysis of the performance of domestic lighting lamps. Energy Policy, 52. pp. 482-500. ISSN 0301-4215

Aman, M.M. and Jasmon, G.B. and Mokhlis, H. and Bakar, A.H.A. (2012) Optimal placement and sizing of a DG based on a new power stability index and line losses. International Journal of Electrical Power & Energy Systems, 43 (1). pp. 1296-1304. ISSN 0142-0615

Aman, M.M. and Solangi, K.H. and Hossain, M.S. and Badarudin, A. and Jasmon, G.B. and Mokhlis, H. and Bakar, A.H.A. and Kazi, S.N. (2015) A review of safety, health and environmental (SHE) issues of solar energy system. Renewable and Sustainable Energy Reviews, 41. pp. 1190-1204. ISSN 1364-0321

Aminuddin, N.I. and Ahmad, R. and Ansari, H.M. and Mohd Zain, N. and Akbar, S.A. and Pingguan-Murphy, B. (2016) Human fetal osteoblast cell response to self-assembled nanostructures on YSZ-(110) single crystal substrates. Materials & Design, 94. pp. 274-279. ISSN 0261-3069

Amir, Z. and Jan, B.M. and Khalil, M. and Wahab, A.K.A. and Hassan, Z. (2015) Rheological behavior and temperature dependency study of Sara line-based super lightweight completion fluid. Journal of Petroleum Science and Engineering, 130. pp. 106-113. ISSN 0920-4105

Amir, Z. and Jan, B.M. and Wahab, A.K.A. and Khalil, M. and Ali, B.S. and Chong, W.T. (2016) Viscosity prediction model optimization for Saraline-based super lightweight completion fluid at high pressure and temperature. Petroleum Exploration and Development, 43 (5). pp. 863-868. ISSN 1876-3804

Amiri, I.S. and Ariannejad, M.M. and Ismail, Mohammad Faizal and Ahmad, Harith (2017) Analysis of semiconductor InGaAsP/InP coupled microring resonators (CMRR) by time-domain travelling wave (TDTW) method. Journal of Optics, 46 (3). pp. 311-319. ISSN 0972-8821

Amiri-Khorasani, M. and Abu Osman, Noor Azuan and Yusof, A. (2011) Acute effect of static and dynamic stretching on hip dynamic range of motion during instep kicking in professional soccer players. Journal of Strength and Conditioning Research, 25 (6). pp. 1647-1652. ISSN 1064-8011

Amiri-Khorasani, M. and Abu Osman, Noor Azuan and Yusof, A. (2011) Biomechanical responses of thigh and lower leg during 10 consecutive soccer instep kicks. Journal of Strength and Conditioning Research, 25 (4). pp. 1177-1181. ISSN 1064-8011

Amiri-Khorasani, M. and Osman, N.A.A. and Yusof, A. (2010) Electromyography assessments of the vastus medialis muscle during soccer instep kicking between dynamic and static stretching. Journal of Human Kinetics, 24. pp. 35-41. ISSN 1640-5544

Amirmojahedi, M. and Akib, S. and Basser, H. and Raymond Ooi, C.H. (2016) Methods for monitoring scour from large-diameter heat probe tests. Structural Health Monitoring, 15 (1). pp. 38-49. ISSN 1475-9217

Amouzad Mahdiraji, G. and Abdullah, M.K. and Mokhtar, M. and Mohammadi, A.M. and Abas, A.F. and Basir, S.M. and Abdullah, R.S.A.R. (2009) 70-Gb/s amplitude-shift-keyed system with 10-GHz clock recovery circuit using duty cycle division multiplexing. Photonic Network Communications, 19 (3). pp. 233-239. ISSN 1572-8188

Amouzad Mahdiraji, G. and Malekmohammadi, A. and Fauzi Abas, A. and Khazani Abdullah, M. (2009) 40 Gbit/s on-off-keyed system with 5.71 GHz clock recovery circuit using duty cycle division multiplexing. In: 2009 Asia Communications and Photonics Conference and Exhibition, ACP 2009, 2009, Shanghai.

An, J. and Kim, J.Y. and Kim, K.W. and Park, J.Y. and Lee, J.S. and Jang, M. (2011) Natural attenuation of arsenic in the wetland system around abandoned mining area. Environmental Geochemistry and Health, 33 (SUPPL.). pp. 71-80. ISSN 0269-4042

Anisur, M.R. and Mahfuz, M.H. and Kibria, M.A. and Saidur, R. and Metselaar, I.H.S.C. and Mahlia, T.M.I. (2013) Curbing global warming with phase change materials for energy storage. Renewable and Sustainable Energy Reviews, 18. pp. 23-30. ISSN 13640321

Annuar, M.S.M. and Tan, I.K.P. and Ibrahim, S. and Ramachandran, K.B. (2008) A kinetic model for growth and biosynthesis of medium-chain-length poly-(3-hydroxyalkanoates) in Pseudomonas putida. Brazilian Journal of Chemical Engineering, 25 (2). pp. 217-228. ISSN 0104-6632

Annuar, M.S.M. and Tan, I.K.P. and Ibrahim, Shaliza and Ramachandran, K.B. (2006) Ammonium uptake and growth kinetics of pseudomonas putida PGA1. Asia Pacific Journal of Molecular Biology and Biotechnology, 14 (1). pp. 1-10. ISSN 0128-7451

Annuar, N.Z.M. and Sabri, M.F.M. and Bakar, A.S.A. (2013) Investigation of the geometry modeling of metal organic halide vapor phase epitaxy (MOHVPE) reactor. Advanced Materials Research, 626. pp. 396-400.

Aprianti, E. and Shafigh, P. and Bahri, S. and Farahani, J.N. (2015) Supplementary cementitious materials origin from agricultural wastes - A review. Construction and Building Materials, 74. pp. 176-187. ISSN 0950-0618

Ar-Rawi, A.H. and Moghavvemi, M. and Ibrahim, W. (2010) Novel idea to monitor and measure blood hemoglobin noninvasively. African Journal of Biotechnology, 9 (54). pp. 9295-9305. ISSN 16845315

Ar-Rawi, A.H. and Moghavvemi, M. and Wan-Ibrahim, W.M.A. (2009) Comparing between three current source circuits for using in bio electrical impedance design. In: International Conference for Technical Postgraduates, TECHPOS 2009, 14-15 December 2009, Kuala Lumpur, Malaysia.

Ar-Rawi, A.H. and Moghavvemi, M. and Wan-Ibrahim, W.M.A. (2009) Wide Band frequency fixed current source for BIT and BIA. In: World Congress on Medical Physics and Biomedical Engineering,Diagnostic Imaging , 7 -12 September 2009, Munich, Germany.

Arafat, M.M. and Dinan, B. and Akbar, S.A. and Haseeb, A.S. Md. Abdul (2012) Gas sensors based on one dimensional nanostructured metal-oxides: a review. Sensors, 12. pp. 7207-7258. ISSN 1424-8220

Arafat, M.M. and Haseeb, A.S. Md. Abdul and Johan, M.R. (2011) Interfacial reaction and dissolution behavior of Cu substrate in molten Sn-3.8Ag-0.7Cu in the presence of Mo nanoparticles. Soldering & Surface Mount Technology, 23 (3). pp. 140-149. ISSN 0954-0911

Arifin, N. and Abu Osman, Noor Azuan and Ali, S. and Gholizadeh, H. and Wan Abas, Wan Abu Bakar (2015) Evaluation of postural steadiness in below-knee amputees when wearing different prosthetic feet during various sensory conditions using the biodex (R) stability system. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 229 (7). pp. 491-498. ISSN 0954-4119

Armstrong, D.E.J. and Haseeb, A.S. Md. Abdul and Roberts, S.G. and Wilkinson, A.J. and Bade, K. (2012) Nanoindentation and micro-mechanical fracture toughness of electrodeposited nanocrystalline Ni-W alloy films. Thin Solid Films, 520 (13). pp. 4369-4372. ISSN 0040-6090

Aroua, M.K. and Chew, C.M. and Hussain, M.A. (2009) Modelling of chromium hexavalent reduction by ferrous ion in a batch stirred tank. Chemical Product and Process Modeling, 4 (1). ISSN 1934-2659

Aroua, M.K. and Daud, W.M.A.W. and Yin, C.Y. and Adinata, D. (2008) Adsorption capacities of carbon dioxide, oxygen, nitrogen and methane on carbon molecular basket derived from polyethyleneimine impregnation on microporous palm shell activated carbon. Separation and Purification Technology, 62 (3). pp. 609-613. ISSN 1383-5866

Aroua, M.K. and Haji-Sulaiman, M.Z. and Ramasamy, K. (2002) Modelling of carbon dioxide absorption in aqueous solutions of AMP and MDEA and their blends using Aspenplus. Separation and Purification Technology, 29 (2). pp. 153-162. ISSN 1383-5866

Aroua, M.K. and Leong, S.P.P. and Teo, L.Y. and Yin, C.Y. and Daud, W.M.A.W. (2008) Real-time determination of kinetics of adsorption of lead(II) onto palm shell-based activated carbon using ion selective electrode. Bioresource Technology, 99 (13). pp. 5786-5792. ISSN 0960-8524

Aroua, M.K. and Salleh, R.M. (2004) Solubility of CO2 in aqueous piperazine and its modeling using the Kent-Eisenberg approach. Chemical Engineering & Technology, 27 (1). pp. 65-70. ISSN 0930-7516

Aroua, M.K. and Yin, C.Y. and Lim, F.N. and Kan, W.L. and Daud, W.M.A.W. (2009) Effect of impregnation of activated carbon with chelating polymer on adsorption kinetics of Pb2+. Journal of Hazardous Materials, 166 (2-3). pp. 1526-1529. ISSN 03043894

Aroua, M.K. and Zuki, F.M. and Sulaiman, N.M. (2007) Removal of chromium ions from aqueous solutions by polymer-enhanced ultrafiltration. Journal of Hazardous Materials, 147 (3). pp. 752-758. ISSN 0304-3894

Aroua, Mohamed Kheireddine and Amor, A.B. and Haji-Sulaiman, M.Z. (1997) Temperature dependency of the equilibrium constant for the formation of carbamate from diethanolamine. Journal of Chemical and Engineering Data, 42 (4). pp. 692-696. ISSN 0021-9568

Aroua, Mohamed Kheireddine and Benamor, A. and Haji-Sulaiman, M.Z. (1999) Equilibrium constant for carbamate formation from monoethanolamine and its relationship with temperature. Journal of Chemical and Engineering Data, 44 (5). pp. 887-891. ISSN 0021-9568

Arpornwichanop, A. and Kittisupakorn, P. and Hussain, M.A. (2002) Model-based control strategies for a chemical batch reactor with exothermic reactions. Korean Journal of Chemical Engineering, 19 (2). pp. 221-226. ISSN 0256-1115

Arulrajah, A. and Bo, M.W. and Nikraz, H. and Hashim, Roslan (2004) Piezocone dissipation testing of Singapore marine clay at Changi. Geotechnical Engineering, 35 (3). pp. 119-126. ISSN 00465828

Asa Deepthi, K. and Balachandran, R. and Ong, B.H. and Tan, K.B. and Wong, H.Y. and Yow, H.K. and Srimala, S. (2016) Physical and electrical characteristics of NiFe thin films using ultrasonic assisted pulse electrodeposition. Applied Surface Science, 360 (Part B). pp. 519-524. ISSN 0169-4332

Asadi-Eydivand, M. and Solati-Hashjin, M. and Farzad, A. and Abu Osman, Noor Azuan (2016) Effect of technical parameters on porous structure and strength of 3D printed calcium sulfate prototypes. Robotics and Computer-Integrated Manufacturing, 37. pp. 57-67. ISSN 0736-5845

Asadi-Eydivand, M. and Solati-Hashjin, M. and Fathi, A. and Padashi, M. and Abu Osman, Noor Azuan (2016) Optimal design of a 3D-printed scaffold using intelligent evolutionary algorithms. Applied Soft Computing, 39. pp. 36-47. ISSN 1568-4946

Asadi-Eydivand, M. and Solati-Hashjin, M. and Shafiei, S.S. and Mohammadi, S. and Hafezi, M. and Abu Osman, Noor Azuan (2016) Structure, properties, and in vitro behavior of heat-treated calcium sulfate scaffolds fabricated by 3D printing. PLoS ONE, 11 (3). e0151216. ISSN 1932-6203

Asaithambi, P. and Alemayehu, E. and Sajjadi, B. and Abdul Raman, A.A. (2017) Electrical energy per order determination for the removal pollutant from industrial wastewater using UV/Fe 2+ /H 2 O 2 process: Optimization by response surface methodology. Water Resources and Industry, 18. pp. 17-32. ISSN 2212-3717

Ashik, U.P.M. and Daud, W.M.A.W. (2015) Nanonickel catalyst reinforced with silicate for methane decomposition to produce hydrogen and nanocarbon: Synthesis by co-precipitation cum modified Stober method. RSC Advances, 5 (58). pp. 46735-46748. ISSN 2046-2069

Ashkan, M. and Ahmad, Y. (2010) Discontinuous double-shell domes through Islamic eras in the middle east and central Asia: History, morphology, typologies, geometry, and construction. Nexus Network Journal, 12 (2). pp. 287-319.

Askari, M. and Mohamed, H.A.F. and Moghavvemi, M. and Yang, S.S. (2009) Application of modified model predictive control to a gantry system. In: ICROS-SICE International Joint Conference 2009, ICCAS-SICE 2009, 18-21 August 2009, Fukuoka, Japan.

Askari, M. and Mohamed, H.A.F. and Moghavvemi, M. and Yang, S.S. (2009) Model predictive control of an inverted pendulum. In: International Conference for Technical Postgraduates, TECHPOS 2009, 14-15 December 2009, Kuala Lumpur, Malaysia.

Aslam, M. and Shafigh, P. and Jumaat, M.Z. (2016) Drying shrinkage behaviour of structural lightweight aggregate concrete containing blended oil palm bio-products. Journal of Cleaner Production, 127. pp. 183-194. ISSN 0959-6526

Aslam, M. and Shafigh, P. and Jumaat, M.Z. and Lachemi, M. (2016) Benefits of using blended waste coarse lightweight aggregates in structural lightweight aggregate concrete. Journal of Cleaner Production, 119. pp. 108-117. ISSN 0959-6526

Aslam, M. and Shafigh, P. and Jumaat, M.Z. and Shah, S.N.R. (2015) Strengthening of RC beams using prestressed fiber reinforced polymers - A review. Construction and Building Materials, 82. pp. 235-256. ISSN 0950-0618

Aslam, M. and Shafigh, P. and Nomeli, M.A. and Jumaat, M.Z. (2017) Manufacturing of high-strength lightweight aggregate concrete using blended coarse lightweight aggregates. Journal of Building Engineering, 13. pp. 53-62. ISSN 2352-7102

Asli, H. and Ahmadinia, E. and Zargar, M. and Karim, M.R. (2012) Investigation on physical properties of waste cooking oil - Rejuvenated bitumen binder. Construction and Building Materials, 37. pp. 398-405. ISSN 0950-0618

Asli, H. and Karim, M.R. (2011) Implementation of waste cooking oil as RAP rejuvenator. In: Proceedings of the Eastern Asia Society for Transportation Studies, 20-23 Jun 2011, Jeju, Korea.

Aslian, A. and Asli, B.H.S. and Tan, Chin Joo and Adikan, Faisal Rafiq Mahamd and Toloei, A. (2016) Design and Analysis of an Optical Coupler for Concentrated Solar Light Using Optical Fibers in Residential Buildings. International Journal of Photoenergy, 2016. pp. 1-11. ISSN 1110-662X

Atabani, A.E. and Rahman, S. and Silitonga, A.S. and Sebayang, A.H. (2011) Energy Economical and Environmental Analysis of Industrial Boilers Using Fuel Switching. International Journal on Advanced Science, Engineering and Information Technology, 1 (5). pp. 501-506. ISSN 978-983-42366-4-9

Atabani, A.E. and Saidur, R. and Silitonga, A.S. and Mahlia, T.M.I. (2012) Energy economical and environmental analysis of industrial boilers using VSD. Applied Mechanics and Materials, 110. pp. 3223-3233. ISSN 3037852623

Atadashi, I.M. and Aroua, M.K. and Abdul Aziz, A.R. and Sulaiman, N.M.N. (2012) High quality biodiesel obtained through membrane technology. Journal of Membrane Science, 421-42. pp. 154-164. ISSN 03767388 (ISSN)

Atadashi, I.M. and Aroua, M.K. and Abdul Aziz, A.R. and Sulaiman, N.M.N. (2012) The effects of water on biodiesel production and refining technologies: A review. Renewable and Sustainable Energy Reviews, 16 (5). pp. 3456-3470. ISSN 13640321 (ISSN)

Atadashi, I.M. and Aroua, M.K. and Abdul Raman, Abdul Aziz and Sulaiman, N.M.N. (2013) The effects of catalysts in biodiesel production: a review. Journal of Industrial and Engineering Chemistry, 19 (1). pp. 14-26. ISSN 1226-086X

Atadashi, I.M. and Aroua, M.K. and Aziz, A.A. (2011) Biodiesel separation and purification: A review. Renewable Energy, 36 (2). pp. 437-443. ISSN 0960-1481

Atadashi, I.M. and Aroua, M.K. and Aziz, A.A. (2010) High quality biodiesel and its diesel engine application: a review. Renewable & Sustainable Energy Reviews, 14 (7). pp. 1999-2008.

Atadashi, I.M. and Aroua, M.K. and Aziz, A.R.A. and Sulaiman, N.M.N. (2011) Membrane biodiesel production and refining technology: a critical review. Renewable & Sustainable Energy Reviews, 15 (9). pp. 5051-5062.

Atadashi, I.M. and Aroua, M.K. and Aziz, A.R.A. and Sulaiman, N.M.N. (2012) Production of biodiesel using high free fatty acid feedstocks. Renewable & Sustainable Energy Reviews, 16 (5). pp. 3275-3285. ISSN 1364-0321

Atadashi, I.M. and Aroua, M.K. and Aziz, A.R.A. and Sulaiman, N.M.N. (2011) Refining technologies for the purification of crude biodiesel. Applied Energy, 88 (12). pp. 4239-4251. ISSN 0306-2619

Ataollahi, F. and Mohri, M. and Seifi, H.A. and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan (2013) Evaluation of copper concentration in subclinical cases of white muscle disease and its relationship with cardiac troponin I. PLoS ONE, 8 (2). pp. 1-5. ISSN 19326203

Ataollahi, F. and Pramanik, S. and Moradi, A. and Dalilottojari, A. and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan (2015) Endothelial cell responses in terms of adhesion, proliferation, and morphology to stiffness of polydimethylsiloxane elastomer substrates. Journal of Biomedical Materials Research Part A, 103 (7). pp. 2203-2213. ISSN 1549-3296

Attaran, A. and Moghavvemi, M. and Jamuar, S.S. (2012) FGMOS-based NMC-RC frequency compensation differential amplifier for low power low voltage applications. In: 2012 1st International Conference on Informatics, Electronics and Vision, ICIEV 2012, 18-19 May 2012, Dhaka, Bangladesh.

Attaran, A. and Moghavvemi, Mahmoud and Ameri, H (2013) Fabricate a 2.4-GHz fractional-N synthesizer. Microwaves & RF, 52 (6). ISSN 0745-2993

Atuchin, V.V. and Kruchinin, V.N. and Wong, Y.H. and Cheong, K.Y. (2013) Microstructural and optical properties of ZrON/Si thin films. Materials Letters, 105. pp. 72-75. ISSN 0167-577X

Awalin, L.J. and Mokhlis, H. and Bakar, A.H.A. (2012) Recent developments in fault location methods for distribution networks. Przeglad Elektrotechniczny, 88 (12 A). pp. 206-212. ISSN 0033-2097

Awalin, L.J. and Mokhlis, H. and Halim, A.H.A. (2012) Improved fault location on distribution network based on multiple measurements of voltage sags pattern. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Awang, N.A. and Shaaban, M.G. (2016) Effect of reactor height/diameter ratio and organic loading rate on formation of aerobic granular sludge in sewage treatment. International Biodeterioration and Biodegradation, 112. pp. 1-11. ISSN 0964-8305

Ayat, F.L. and Moghavvemi, M. and Attaran, A. (2011) Thickness effect of micro speaker copper coil fabrication process. Sensors and Transducers, 130 (7). pp. 127-135. ISSN 17265479

Ayodele, O.B. and Farouk, H.U. and Mohammed, J. and Uemura, Y. and Daud, W.M.A.W. (2015) Effect of precursor acidity on zeolite supported Pd catalyst properties and hydrodeoxygenation activity for the production of biofuel. Journal of Molecular Catalysis a-Chemical, 400. pp. 179-186. ISSN 1381-1169

Ayoub, N. and Amin, Y.M. and Arof, Abdul Kariem (2009) Gamma irradiation of PVdF based polymer electrolytes. In: National Workshop on Functional Materials 2009, 16 June 2009, Centre For Ionics, University of Malaya.

Ayusoff, N. and Soin, N. and Abd Rahman, N. and Raja Abd Rahman, R.N.Z. and Abd Kahar, M.K.B. and Ibrahim, F. (2009) Binding characteristics study for dengue virus non-structural protein 1 of antigen and Its antibody by using circular dichroism technique. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.

Azari, P. and Luan, N.S. and Gan, S.N. and Yahya, R. and Wong, C.S. and Chua, K.H. and Pingguan-Murphy, B. (2015) Electrospun biopolyesters as drug screening platforms for corneal keratocytes. International Journal of Polymeric Materials and Polymeric Biomaterials, 64 (15). pp. 785-791. ISSN 0091-4037

Aziz, A. and Yau, Y.H. and Puma, G.L. and Fischer, C. and Ibrahim, S. and Pichiah, S. (2014) Highly efficient magnetically separable TiO2-graphene oxide supported SrFe12O19 for direct sunlight-driven photoactivity. Chemical Engineering Journal, 235. pp. 264-274. ISSN 1385-8947

Aziz, A.A. and Cheng, C.K. and Ibrahim, S. and Matheswaran, M. and Saravanan, P. (2012) Visible light improved, photocatalytic activity of magnetically separable titania nanocomposite. Chemical Engineering Journal, 183. pp. 349-356. ISSN 13858947

Aziz, A.A. and Puma, G.L. and Ibrahim, S. and Saravanan, P. (2013) Preparation, characterisation and solar photoactivity of titania supported strontium ferrite nanocomposite photocatalyst. Journal of Experimental Nanoscience, 8 (3). pp. 295-310. ISSN 1745-8080

Aziz, A.A. and Yong, K.S. and Ibrahim, S. and Pichiah, S. (2012) Enhanced magnetic separation and photocatalytic activity of nitrogen doped titania photocatalyst supported on strontium ferrite. Journal of Hazardous Materials, 199-20. pp. 143-150. ISSN 0304-3894

Aziz, A.R. and Ibrahim, S. and Parthasarathy, R. (1999) Determination of just-suspension speed for Rushton Turbine using tank bottom pressure measurements. Institution of Chemical Engineers Symposium Series (146). pp. 325-335. ISSN 03070492 (ISSN)

Aziz, A.R. and Nik Meriam, N.S. and Ibrahim, S. (2004) Mass transfer performance of curve blade impeller in gas-liquid mixing. Journal of Industrial Technology, 13 (1). pp. 69-78.

Aziz, N. and Hussain, M.A. and Mujtaba, I.M. (2003) Implementation of neural network inverse-model-based control (NN-IMBC) strategy in batch reactors. Computer Aided Chemical Engineering, 15. pp. 708-713. ISSN 1570-7946

Aziz, N. and Hussain, M.A. and Mujtaba, I.M. (2000) Optimal control of batch reactors using generic model control (GMC) and neural network. Computer Aided Chemical Engineering, 8. pp. 175-180. ISSN 15707946

Aziz, N. and Hussain, M.A. and Mujtaba, I.M. (2000) Performance of different types of controllers in tracking optimal temperature profiles in batch reactors. Computers & Chemical Engineering, 24 (2-7). pp. 1069-1075. ISSN 0098-1354

Aziz, N. and Yusoff, R. and Aroua, M.K. (2012) Absorption of CO 2 in aqueous mixtures of N-methyldiethanolamine and guanidinium tris(pentafluoroethyl)trifluorophosphate ionic liquid at high-pressure. Fluid Phase Equilibria, 322-32. pp. 120-125. ISSN 03783812

Aziz, N. and Yusoff, R. and Aroua, M.K. (2012) Absorption of CO2 in aqueous mixtures of N-methyldiethanolamine and guanidinium tris (pentafluoroethyl) trifluorophosphate ionic liquid at high-pressure. Fluid Phase Equilibria, 322-32. pp. 120-125. ISSN 03783812

Aziz, N.A. (2009) Characterization and ionic conductivity of polymeric electrolytes based on chitosan-ammonium thiocyanate- tiOz ceramic materials. In: National Workshop on Functional Materials 2009, 16 June 2009, Centre For Ionics, University of Malaya.

Aziz, N.A.A. and Ibrahim, Z. and Mubin, M. and Nawawi, S.W. and Aziz, N.H.A. (2017) Transitional Particle Swarm Optimization. International Journal of Electrical and Computer Engineering (IJECE), 7 (3). pp. 1611-1619. ISSN 2088-8708

Aziz, S.B. and Rusli, M.S. and Abidin, Z.H.Z. and Arof, Abdul Kariem (2009) DC and AC conductivity of chitosan-silver triflate polymer electrolyte. In: National Workshop on Functional Materials 2009, 16 June 2009, Centre For Ionics, University of Malaya.

Azlan Hussain, Mohamed (1999) Review of the applications of neural networks in chemical process control—simulation and online implementation. Artificial Intelligence in Engineering, 13 (1). pp. 55-68. ISSN 0954-1810

Azmer, M.I. and Aziz, F. and Ahmad, Z. and Raza, E. and Najeeb, M.A. and Fatima, N. and Bawazeer, T.M. and Alsoufi, M.S. and Shakoor, R.A. and Sulaiman, K. (2017) Compositional engineering of VOPcPhO-TiO2 nano-composite to reduce the absolute threshold value of humidity sensors. Talanta, 174. pp. 279-284. ISSN 0039-9140

Azoddein, A.A. and Ibrahim, S. and Hassan, A. (2001) The Effect of Impeller Design on the Mixing of Non-Newtonian Internal Tyre Lubricant. Journal of Industrial Technology, 10 (1). pp. 105-113.

Azri, M. and Abd Rahim, N. and Abd Halim, W. (2015) A highly efficient single-phase transformerless h-bridge inverter for reducing leakage ground current in photovoltaic grid-connected system. Electric Power Components and Systems, 43 (8-10). pp. 928-938. ISSN 1532-5008

Azuan, N. (2003) An innovative survey poles configuration: an alternative 3-D volume calibrating system more. BioMedical Engineering OnLine.

Azuddin, M. and Choudhury, I.A. and Taha, Z. (2015) Development and performance evaluation of a low-cost custom-made vertical injection molding machine. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 37 (1). pp. 79-86. ISSN 1678-5878

Azuddin, M. and Rosli, M.A.M. (2009) Development and Analysis of Taper Tool Path for Micro Turning Operation. Modern Applied Science, 3 (1). pp. 176-186. ISSN 1913-1844

Azuddin, M. and Zahari, T. and Choudhury, I.A. (2011) Observation of Polypropylene (PP) Melt Flow on Microchannel Using Polymethyl Methacrylate (PMMA) Mold. Materials and Manufacturing Processes, 26 (2). pp. 255-260. ISSN 1042-6914

Azwar, . and Hussain, M.A. and Ramachandran, K.B. (2005) Modeling and dynamic simulation of activated sludge process in sequencing batch reactor. Developments in Chemical Engineering and Mineral Processing, 13 (5-6). pp. 675-686. ISSN 0969-1855

Azwar, . and Hussain, M.A. and Ramachandran, K.B. (2006) The study of neural network-based controller for controlling dissolved oxygen concentration in a sequencing batch reactor. Bioprocess and Biosystems Engineering, 28 (4). pp. 251-265. ISSN 1615-7591

B

Baghaee Moghaddam, T. and Karim, M.R. and Syammaun, T. (2012) Dynamic properties of stone mastic asphalt mixtures containing waste plastic bottles. Construction and Building Materials, 34. pp. 236-242. ISSN 09500618

Baghaee Moghaddam, T. and Soltani, M. and Karim, M.R. (2014) Evaluation of permanent deformation characteristics of unmodified and Polyethylene Terephthalate modified asphalt mixtures using dynamic creep test. Materials and Design, 53. pp. 317-324. ISSN 02613069

Bagheri, S. and Julkapli, N.M. (2016) Magnetite hybrid photocatalysis: Advance environmental remediation. Reviews in Inorganic Chemistry, 36 (3). pp. 135-151. ISSN 0193-4929

Bagheri, S. and Julkapli, N.M. (2016) Modified iron oxide nanomaterials: Functionalization and application. Journal of Magnetism and Magnetic Materials, 416. pp. 117-133. ISSN 0304-8853

Bagheri, Samira and Mohd Hir, Z.A. and Termeh Yousefi, A. and Hamid, Sharifah Bee Abd (2016) Photocatalytic performance of activated carbon-supported mesoporous titanium dioxide. Desalination and Water Treatment, 57 (23). pp. 10859-10865. ISSN 1944-3994

Bagheri, Samira and Ramimoghadam, D. and Mansouri, N. and Hamid, Sharifah Bee Abd (2016) Electrocatalytic Activity of Immobilized Co(II) on Porous Graphene Aerogels. Journal of the Chinese Chemical Society, 63 (7). pp. 590-595. ISSN 0009-4536

Bahadori, L. and Manan, N.S. and Chakrabarti, M.H. and Hashim, M.A. and Mjalli, F.S. and AlNashef, I.M. and Hussain, M.A. and Low, C.T. (2013) The electrochemical behaviour of ferrocene in deep eutectic solvents based on quaternary ammonium and phosphonium salts. Physical Chemistry Chemical Physics , 15 (5). pp. 1707-1714. ISSN 1463-9084

Bahari, H.R. and Sidek, H.A.A. and Adikan, Faisal Rafiq Mahamd and Yunus, W.M.M. and Halimah, M.K. (2012) Infrared Study of Er3+/Yb3+ Co-Doped GeO2-PbO-Bi2O3 Glass. International Journal of Molecular Sciences, 13 (7). pp. 8609-8614. ISSN 1661-6596

Baharuddin, M.F.T. and Hashim, Roslan and Taib, S. (2009) Electrical imaging resistivity study at the coastal area of Sungai Besar, Selangor, Malaysia. Journal of Applied Sciences, 9 (16). pp. 2897-2906. ISSN 18125654

Baharuddin, M.F.T. and Ismail, Z. and Othman, S.Z. and Taib, S. and Hashim, Roslan (2013) Use of time-lapse resistivity tomography to determine freshwater lens morphology. Measurement, 46 (2). pp. 964-975. ISSN 0263-2241

Baharuddin, N.H. and Sulaiman, N.M.N. and Aroua, M.K. (2015) Removal of heavy metal Ions from mixed solutions via polymer-enhanced ultrafiltration using starch as a water-soluble biopolymer. Environmental Progress & Sustainable Energy, 34 (2). pp. 359-367. ISSN 1944-7442

Baharuddin, N.H. and Sulaiman, N.M.N. and Aroua, M.K. (2015) Removal of zinc and lead ions by polymer-enhanced ultrafiltration using unmodified starch as novel binding polymer. International Journal of Environmental Science and Technology, 12 (6). pp. 1825-1834. ISSN 1735-1472

Bakar, A.H.A. and Illias, H.A. and Othman, M.K. and Mokhlis, H. (2013) Identification of failure root causes using condition based monitoring data on a 33 kV switchgear. International Journal of Electrical Power & Energy Systems, 47. pp. 305-312. ISSN 0142-0615

Bakar, A.H.A. and Khan, S.A. and Tan, C.K. and Rahim, N.A. (2014) A review of ferroresonance in capacitive voltage transformer. IEEJ Transactions on Electrical and Electronic Engineering, 10 (1). pp. 28-35. ISSN 1931-4973

Bakar, A.H.A. and Lim, C.H. and Mekhilef, S. (2006) Investigation of transient performance of capacitor voltage transformer. In: 1st International Power and Energy Conference, PECon 2006, Putrajaya.

Bakar, A.H.A. and Mokhlis, H. and Illias, N.A. and Chong, P.L. (2012) The study of directional overcurrent relay and directional earth-fault protection application for 33 kV underground cable system in Malaysia. International Journal of Electrical Power & Energy Systems, 40 (1). pp. 113-119. ISSN 0142-0615

Bakar, A.H.A. and Mokhlis, Hazlie and Ling, L.A. and Ping, H.W. (2010) Lightning over voltage performance of 132kV GIS substation in Malaysia. In: Power System Technology (POWERCON), 2010 International Conference on, 2010.

Bakar, A.H.A. and Ooi, B.J. and Tan, C.K. and Illias, H.A. and Mokhlis, H. (2014) Directional overcurrent and earth-fault protections for a biomass microgrid system in Malaysia. International Journal of Electrical Power & Energy Systems, 55. pp. 581-591. ISSN 0142-0615

Bakar, A.H.A. and Talib, D.N.A. and Mokhlis, H. and Illias, H.A. (2013) Lightning back flashover double circuit tripping pattern of 132 kV lines in Malaysia. International Journal of Electrical Power & Energy Systems, 45 (1). pp. 235-241. ISSN 0142-0615

Bakar, A.H.A. and Yusof, S. and Satchiananda, M. and Mekhilef, S. (2006) Load response towards voltage in TNB power system using the measurement approach. In: 1st International Power and Energy Conference, PECon 2006, Putrajaya.

Bakar, A.H.A. and Zali, S.M. and Tan, C.K. and Illias, H.A. and Mokhlis, H. (2016) A comparative study for current transformer dimensioning in overcurrent relay. IEEJ Transactions on Electrical and Electronic Engineering, 11 (S1). S43-S48. ISSN 1931-4973

Bakar, A.H.B.A. and Koay, Y.S. and Ching, Y.C. and Abdullah, L.C. and Choong, T.S.Y. and Alkhatib, M. and Mobarekeh, M.N. and Zahri, N.A.M. (2016) Removal of fluoride using quaternized palm kernel shell as adsorbents: Equilibrium isotherms and kinetics studies. BioResources, 11 (2). pp. 4485-4511. ISSN 1930-2126

Bakar, Ab Halim Abu and Ali, M.S. and Tan, Chia Kwang and Mokhlis, Hazlie and Arof, Hamzah (2014) High impedance fault location in 11 kV underground distribution systems using wavelet transforms. International Journal of Electrical Power & Energy Systems, 55. pp. 723-730. ISSN 0142-0615

Bang, L.T. and Long, B.D. and Othman, R. (2014) Carbonate Hydroxyapatite and Silicon-Substituted Carbonate Hydroxyapatite: Synthesis, Mechanical Properties, and Solubility Evaluations. Scientific World Journal, 2014. pp. 1-9. ISSN 2356-6140

Bani Hashim, A.Y. and Abu Osman, Noor Azuan and Wan Abas, W.A.B. and Abdul Latif, L. (2013) Approximating the relationship among the degree of the reaction forces and the nodes on footprint during a stance phase. Applied Mathematical Modelling, 37 (1-2). pp. 258-264. ISSN 0307904X

Bani Hashim, A.Y. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Abdul Latif, L. (2012) Approximating the relationship among the degree of the reaction forces and the nodes on footprint during a stance phase. Applied Mathematical Modelling. ISSN 0307-904X

Bani Hashim, A.Y. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Abdul Latif, L. (2011) Approximation technique for prosthetic design using numerical foot profiling. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Bani Hashim, A.Y. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Abdul Latif, L. (2009) Evaluation of a bio-mechanism by graphed static equilibrium forces. World Academy of Science, Engineering and Technology, 36. pp. 807-810. ISSN 2010376X

Bani Hashim, A.Y. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Abdul Latif, L. (2011) Prosthetic foot design: the significance of the normalized ground reaction force. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Baradaran, S. and Moghaddam, E. and Nasiri-Tabrizi, B. and Basirun, Wan Jefrey and Mehrali, M. and Sookhakian, M. and Hamdi, M. and Alias, Y. (2015) Characterization of nickel-doped biphasic calcium phosphate/graphene nanoplatelet composites for biomedical application. Materials Science and Engineering: C, 49. pp. 656-668. ISSN 0928-4931

Barham, H.A. and Brahim, S.A. and Rozita, Y. and Mohamed, K.A. (2011) Carbon steel corrosion behaviour in aqueous carbonated solution of MEA/bmim DCA. International Journal of Electrochemical Science, 6 (1). pp. 181-198. ISSN 1452-3981

Baroutian, S. and Aroua, M.K. and Abdul Aziz, A.R. and Sulaiman, N.M.N. (2012) TiO 2/Al 2O 3 membrane reactor equipped with a methanol recovery unit to produce palm oil biodiesel. International Journal of Energy Research, 36 (1). pp. 120-129. ISSN 0363907X (ISSN)

Baroutian, S. and Aroua, M.K. and Abdul Raman, A.A. and Nik Sulaiman, N.M. (2008) Estimation of vegetable oil-based Ethyl esters biodiesel densities using artificial neural networks. Journal of Applied Sciences, 8 (17). pp. 3005-3011. ISSN 18125654 (ISSN)

Baroutian, S. and Aroua, M.K. and Abdul Raman, A.A. and Sulaiman, N.M. (2009) RBD palm olein-based methyl/ethyl esters. Journal of Oil Palm Research, 21. pp. 659-666. ISSN 1511-2780

Baroutian, S. and Aroua, M.K. and Abdul Raman, A.A. and Sulaiman, N.M.N. (2010) Methanol recovery during transesterification of palm oil in a TiO 2/Al2O3 membrane reactor: Experimental study and neural network modeling. Separation and Purification Technology, 76 (1). pp. 58-63. ISSN 1383-5866

Baroutian, S. and Aroua, M.K. and Abdul Raman, A.A. and Sulaiman, N.M.N. (2010) Methanol recovery during transesterification of palm oil in a TiO2/Al2O3 membrane reactor: experimental study and neural network modeling. Separation and Purification Technology, 76 (1). pp. 58-63.

Baroutian, S. and Aroua, M.K. and Abdul Raman, A.A. and Sulaiman, N.M.N. (2010) Potassium hydroxide catalyst supported on palm shell activated carbon for transesterification of palm oil. Fuel Processing Technology, 91 (11). pp. 1378-1385. ISSN 0378-3820

Baroutian, S. and Aroua, M.K. and Abdul Raman, A.A. and Sulaiman, N.M.N. (2008) Prediction of palm oil-based methyl ester biodiesel density using artificial neural networks. Journal of Applied Sciences, 8 (10). pp. 1938-1943. ISSN 18125654 (ISSN)

Baroutian, S. and Aroua, M.K. and Abdul Raman, A.A. and Sulaiman, N.M.N. (2011) A packed bed membrane reactor for production of biodiesel using activated carbon supported catalyst. Bioresource Technology, 102 (2). pp. 1095-1102. ISSN 0960-8524

Baroutian, S. and Aroua, M.K. and Abdul Raman, Abdul Aziz and Sulaiman, N.M.N. (2008) Densities of ethyl esters produced from different vegetable oils. Journal of Chemical and Engineering Data, 53 (9). pp. 2222-2225. ISSN 0021-9568

Baroutian, S. and Aroua, M.K. and Abdul Raman, Abdul Aziz and Sulaiman, N.M.N. (2008) Density of palm oil-based methyl ester. Journal of Chemical and Engineering Data, 53 (3). pp. 877-880. ISSN 0021-9568

Baroutian, S. and Aroua, M.K. and Abdul Raman, Abdul Aziz and Sulaiman, N.M.N. (2010) Viscosities and densities of binary and ternary blends of palm oil plus palm biodiesel plus diesel fuel at different temperatures. Journal of Chemical and Engineering Data, 55 (1). pp. 504-507. ISSN 0021-9568

Baroutian, Saeid and Aroua, Mohamed Kheireddine and Abdul Raman, Abdul Aziz and Shafie, Azzahra and Ismail, Raja Adeliza and Hamdan, Hartini (2013) Blended aviation biofuel from esterified Jatropha curcas and waste vegetable oils. Journal of the Taiwan Institute of Chemical Engineers, 44 (6). pp. 911-916. ISSN 1876-1070

Basar, M.R. and Ahmad, M.Y. and Cho, J. and Ibrahim, F. (2016) An improved resonant wireless power transfer system with optimum coil configuration for capsule endoscopy. Sensors and Actuators A: Physical, 249. pp. 207-216. ISSN 0924-4247

Basha, E.A. and Hashim, Roslan and Mahmud, H.B. and Muntohar, A.S. (2005) Stabilization of residual soil with rice husk ash and cement. Construction and Building Materials, 19 (6). pp. 448-453. ISSN 09500618

Basha, E.A. and Hashim, Roslan and Muntohar, A.S. (2003) Effect of the cement-rice husk ash on the plasticity and compaction of soil. Electronic Journal of Geotechnical Engineering, 8 A. ISSN 10893032

Bashar, I.I. and Alengaram, U.J. and Jumaat, M.Z. and Islam, A. and Santhi, H. and Sharmin, A. (2016) Engineering properties and fracture behaviour of high volume palm oil fuel ash based fibre reinforced geopolymer concrete. Construction and Building Materials, 111. pp. 280-297. ISSN 0950-0618

Basir, S.M. and Mahdiraji, G.A. and Malekmohammadi, A. and Ibrahim, N.H. and Abas, A.F. and Abdullah, M.K. (2009) Demonstration of duty cycle division multiplexing with bit error rate estimation. In: Communications (MICC), 2009 IEEE 9th Malaysia International Conference on, 2009.

Basir, S.M. and Mahdiraji, G.A. and Malekmohammadi, A. and Ibrahim, N.H. and Abas, A.F. and Abdullah, M.K. and Mohamed, N. and Idrus, S.M. and Mohammad, A.B. and Harun, H. (2012) Proof-of-concept experiment of duty cycle division multiplexing with bit error rate analysis. Open Electrical & Electronic Engineering Journal, 6. pp. 1-6. ISSN 1874-1290

Batcha, F.K. and Agamuthu, P. and Ibrahim, S. (2003) A Study of the Ampang Landfill Leachate Characteristics and its Effects on River Water Quality Parameters. Malaysian Journal of Science, 22 (1). pp. 43-53. ISSN 1394-3065

Behnia, A. and Chai, H.K. and Ranjbar, N. and Jumaat, M.Z. (2015) Damage detection of SFRC concrete beams subjected to pure torsion by integrating acoustic emission and Weibull damage function. Structural Control and Health Monitoring, 23 (1). pp. 51-68. ISSN 1545-2255

Behnia, A. and Ranjbar, N. and Chai, H.K. and Masaeli, M. (2016) Failure prediction and reliability analysis of ferrocement composite structures by incorporating machine learning into acoustic emission monitoring technique. Construction and Building Materials, 122. pp. 823-832. ISSN 0950-0618

Behnia, Arash and Chai, Hwa Kian and Mousa, Ahmad A. and Ravanfar, Seyed Alireza (2019) A novel damage index for online monitoring of RC slabs under monotonic loading by integration of process controlling into acoustic emission technique. Mechanical Systems and Signal Processing, 119. pp. 547-560. ISSN 0888-3270

Benamor, A. and Ali, B.S. and Aroua, M.K. (2008) Kinetic of CO2 absorption and carbamate formation in aqueous solutions of diethanolamine. Korean Journal of Chemical Engineering, 25 (3). pp. 451-460. ISSN 0256-1115

Benamor, A. and Aroua, M.K. (2005) Modeling of CO2 solubility and carbamate concentration in DEA, MDEA and their mixtures using the Deshmukh-Mather model. Fluid Phase Equilibria, 231 (2). pp. 150-162. ISSN 0378-3812

Benamor, A. and Aroua, M.K. (2007) An experimental investigation on the rate of CO2 absorption into aqueous methyldiethanolamine solutions. Korean Journal of Chemical Engineering, 24 (1). pp. 16-23. ISSN 0256-1115

Bessiere, J. and Aroua, M.K. (1992) Electrochemical determination of acid-base and oxidation-reduction properties of concentrated phosphoric-acid solutions progressively neutralized by soda. Canadian Journal of Chemistry-Revue Canadienne De Chimie, 70 (6). pp. 1843-1848. ISSN 0008-4042

Bhattacharyya, A. and Pachori, R.B. and Acharya, U.R. (2017) Tunable-Q Wavelet Transform Based Multivariate Sub-Band Fuzzy Entropy with Application to Focal EEG Signal Analysis. Entropy, 19 (3). p. 99. ISSN 1099-4300

Bhattacharyya, A. and Pachori, R.B. and Upadhyay, A. and Acharya, U.R. (2017) Tunable-Q Wavelet Transform Based Multiscale Entropy Measure for Automated Classification of Epileptic EEG Signals. Applied Sciences, 7 (4). p. 385. ISSN 2076-3417

Bhuiya, M.M.K. and Ahamed, Jamal Uddin and Chowdhury, M.S.U. and Sarkar, M.A.R. and Salam, B. and Saidur, Rahman and Masjuki, Haji Hassan and Kalam, M.A. (2012) Heat transfer enhancement and development of correlation for turbulent flow through a tube with triple helical tape inserts. International Communications in Heat and Mass Transfer, 39 (1). pp. 94-101. ISSN 0735-1933

Bhuiya, M.M.K. and Ahamed, Jamal Uddin and Sarkar, M.A.R. and Salam, B. and Masjuki, Haji Hassan and Kalam, M.A. and Saidur, Rahman and Sayem, A.S.M. (2012) Heat transfer and pressure drop characteristics in turbulent flow through a tube. Experimental Heat Transfer, 25 (4). pp. 301-322. ISSN 0891-6152

Bhuiyan, M.H.U. and Saidur, R. and Mostafizur, R.M. and Mahbubul, I.M. and Amalina, M.A. (2015) Experimental investigation on surface tension of metal oxide-water nanofluids. International Communications in Heat and Mass Transfer, 65. pp. 82-88. ISSN 0735-1933

Bhuiyan, M.Z.I. and Hj Ali, F. and Salman, F.A. (2011) Frictional behaviour of segmental retaining wall units infilled with recycled concrete aggregate. In: 2011 IEEE Symposium on Business, Engineering and Industrial Applications, 25-28 Sep 2011, Langkawi.

Billah, M.M. and Rahman, M.M. and Saidur, R. and Hasanuzzaman, M. (2011) Simulation of mhd mixed convection heat transfer enhancement in a double lid-driven obstructed enclosure. International Journal of Mechanical and Materials Engineering, 6 (1). pp. 18-30. ISSN 1823-0334

Billah, M.M. and Rahman, M.M. and Sharif, U.M. and Rahim, N.A. and Saidur, R. and Hasanuzzaman, M. (2011) Numerical analysis of fluid flow due to mixed convection in a lid-driven cavity having a heated circular hollow cylinder. International Communications in Heat and Mass Transfer, 38 (8). pp. 1093-1103. ISSN 0735-1933

Birgani, P.M. and Ranjbar, N. and Abdullah, R.C. and Wong, K.T. and Lee, G. and Ibrahim, Shaliza and Park, C. and Yoon, Y. and Jang, Min (2016) An efficient and economical treatment for batik textile wastewater containing high levels of silicate and organic pollutants using a sequential process of acidification, magnesium oxide, and palm shell-based activated carbon application. Journal of Environmental Management, 184. pp. 229-239. ISSN 0301-4797

Bodruzzaman, M. and Gupta, R. and Karim, M.R. and Bodruzzaman, S. (2000) Neural network-based codebook search for image compression. In: IEEE SoutheastCon 2000 'Preparing for the New Millennium', 2000, Nashville, TN, USA.

Bonab, R.S. and Rahman, S. (2012) Clean automotive technology: Hydraulic hybrid vehicles (HHVs). Applied Mechanics and Materials, 165. pp. 12-15. ISSN 1662-7482

Braz, G.P. and Russold, M.F. and Fornusek, C. and Hamzaid, N.A. and Smith, R.M. and Davis, G.M. (2016) A novel motion sensor-driven control system for FES-assisted walking after spinal cord injury: A pilot study. Medical Engineering & Physics, 38 (11). pp. 1223-1231. ISSN 1350-4533

Bushroa, A.R. and Jacob, C. and Saijo, H. and Nishino, S. (2004) Lateral epitaxial overgrowth and reduction in defect density of 3C-SiC on patterned Si substrates. Journal of Crystal Growth, 271 (1-2). pp. 200-206. ISSN 0022-0248

Bushroa, A.R. and Ying, C.C. (2008) Plasma Non-Transferred Arc Cladding of Alumina Powder on Mild Steel-Parameters Optimization Using Taguchi Method. Advanced Materials Research, 47-50. pp. 1003-1006. ISSN 1022-6680

Bushroa, Abdul Razak and Masjuki, Haji Hassan and Muhamad, M.R. (2011) Parameter optimization of sputtered Ti interlayer using Taguchi method. International Journal of Mechanical and Materials Engineering, 6 (2). pp. 140-146. ISSN 1823-0334

Bushroa, Abdul Razak and Masjuki, Haji Hassan and Muhamad, Muhamad Rasat and Beake, B.D. (2011) Optimized scratch adhesion for TiSiN coatings deposited by a combination of DC and RF sputtering. Surface and Coatings Technology, 206 (7). pp. 1837-1844. ISSN 0257-8972

Bushroa, Abdul Razak and Rahbari, R.G. and Masjuki, Haji Hassan and Muhamad, Muhamad Rasat (2012) Approximation of crystallite size and microstrain via XRD line broadening analysis in TiSiN thin films. Vacuum, 86 (8). pp. 1107-1112. ISSN 0042-207X

Buthiyappan, A. and Abdul Aziz, A.R. and Daud, W.M.A.W. (2013) Optimization of reactive dyes degradation by Fenton oxidation using response surface method. In: Hong Kong International Conference on Engineering and Applied Science, 19-22 December 2013, Hong Kong.

Buthiyappan, Archina and Abdul Raman, Abdul Aziz (2019) Energy intensified integrated advanced oxidation technology for the treatment of recalcitrant industrial wastewater. Journal of Cleaner Production, 206. pp. 1025-1040. ISSN 0959-6526

C

Cha, J. and Cui, M. and Jang, M. and Cho, S.H. and Moon, D.H. and Khim, J. (2011) Kinetic and mechanism studies of the adsorption of lead onto waste cow bone powder (WCBP) surfaces. Environmental Geochemistry and Health, 33 (SUPPL.). pp. 81-89. ISSN 0269-4042

Chai, A.B. and Andriyana, A. and Verron, E. and Johan, M.R. and Haseeb, A.S. Md. Abdul (2011) Development of a compression test device for investigating interaction between diffusion of biodiesel and large deformation in rubber. Polymer Testing, 30 (8). pp. 867-875. ISSN 0142-9418

Chakrabarti, M.H. and Ali, M. and Usmani, J.N. and Khan, N.A. and Hasan, D.B. and Islam, M.S. and Abdul Raman, A.A. and Yusoff, R. and Irfan, M.F. (2012) Status of biodiesel research and development in Pakistan. Renewable and Sustainable Energy Reviews, 16 (7). pp. 4396-4405. ISSN 13640321

Chan, B.T. and Lim, Einly and Ong, C.W. and Abu Osman, Noor Azuan (2015) Effect of spatial inlet velocity profiles on the vortex formation pattern in a dilated left ventricle. Computer Methods in Biomechanics and Biomedical Engineering, 18 (1). pp. 90-96. ISSN 1025-5842

Chan, C.H. and Lim, J.J. and Yusoff, R. and Ngoh, G.C. (2015) A generalized energy-based kinetic model for microwave-assisted extraction of bioactive compounds from plants. Separation and Purification Technology, 143. pp. 152-160. ISSN 1383-5866

Chan, C.H. and Ngoh, G.C. and Yusoff, R. (2012) A brief review on anti diabetic plants: global distribution, active ingredients, extraction techniques and acting mechanisms. Pharmacognosy Reviews, 6 (11). pp. 22-28. ISSN 0976-2787

Chan, C.H. and Yusoff, R. and Ngoh, G.C. and Kung, F.W. (2011) Microwave-assisted extractions of active ingredients from plants. Journal of Chromatography A, 1218 (37). pp. 6213-6225. ISSN 0021-9673

Chan, E.L. and Rahim, N.A. and Mekhilef, S. (2002) DSP-based fuzzy logic controller for a battery charger. In: 2002 IEEE Region 10 Conference on Computers, Communications, Control and Power Engineering, Beijing.

Chang, K.B. and Lai, S.H. and Othman, F. (2016) Comparison of Annual Maximum and Partial Duration Series for Derivation of Rainfall Intensity-Duration-Frequency Relationships in Peninsular Malaysia. Journal of Hydrologic Engineering, 21 (1). 05015013. ISSN 1084-0699

Chang, Kah-Hyong and Paramesran, R. (2015) A configurable architecture for fast moments computation. Journal of Signal Processing Systems for Signal Image and Video Technology, 78 (2). pp. 179-186. ISSN 1939-8018

Che Din, N. and Engku Ahmad, E.M. and Hussein, H. (2015) Investigation on the soundscape preference and perception of highlands environment: A preliminary study. In: The 22nd International Congress on Sound and Vibration Conference, 2015, Florence, Italy.

Che Hassan, C.R. and Puvaneswaran, B. and Abdul Raman, A.A. and Noor Zalina, M. and Hung, F.C. and Sulaiman, N.M. (2010) Quantitative risk assessment for the transport for ammonia by rail. Journal of Process Safety Progress, 29 (1). pp. 61-63.

Cheah, G.P. and Tan, C.Y. and Farazila, Y. and Andanastuti, M. and Lim, K.F. and Yap, B.K. (2013) The effects of sintering behavior of zirconia dopedhydroxyapatite for clinical applications. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Chen, L. and Lam, Wei-Haur (2015) A review of survivability and remedial actions of tidal current turbines. Renewable & Sustainable Energy Reviews, 43. pp. 891-900. ISSN 1364-0321

Chen, Wang and Hong, Wan Thing and Abdul-Rahman, Hamzah (2018) Architectural examination on Feng Shui Bedroom. Open House International, 43 (2). pp. 40-48. ISSN 0168-2601

Cheng, X.S. and Hamida, B.A. and Naji, A.W. and Arof, Hamzah and Ahmad, Harith and Harun, Sulaiman Wadi (2012) Compact and wide-band bismuth-based erbium-doped fibre amplifier based on two-stage and double-pass approaches. IET Optoelectronics, 6 (3). pp. 127-130. ISSN 1751-8768

Chew, S.P. and Zulkifli, A.Z. and Hamad, H. and Harun, Sulaiman Wadi and Lee, L.Y. and Razak, H.A. and Adikan, Faisal Rafiq Mahamd (2018) Singlemode-multimode-singlemode fiber structure as compressive strain sensor on a reinforced concrete beam. Optik, 154. pp. 705-710. ISSN 0030-4026

Chew, S.P. and Zulkifli, Ahmad Zarif and Masnan, S.E.F. and Akib, Shatirah Mohamed and Harun, Sulaiman Wadi and Adikan, Faisal Rafiq Mahamd and Ahmad, Harith (2017) Water wave gauge based on singlemode-multimode-singlemode fiber structure. Optik, 144. pp. 232-239. ISSN 0030-4026

Chew, W.J. and Ramesh, S. and Wong, Y.H. and Misran, H. and Yusuf, F. and Tan, C.Y. and Amiriyan, M. and Tolouei, R. and Teng, W.D. (2014) Sintering properties of zirconia-based ceramic composite. Materials Research Innovations, 18 (S6). S6-105-S6-108. ISSN 1432-8917

Chitsazan, I. and Kobraei, M. and Jumaat, M.Z. and Shafigh, P. (2010) An experimental study on the flexural behaviour of FRP RC bemas and comparison of the ultimate moment capacity with ACI. Journal of Civil Engineering and Construction Technology, 1 (2). pp. 27-42. ISSN 2141-2634

Cho, J. and Choi, J. and Nam, T. and Park, J. and Park-Ko, I. and Ibrahim, F. (2007) Development of tilt table with visual feedback function for hemiplegia patients. Conference proceedings : Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference, 2007. pp. 4782-4785. ISSN 1557-170X

Choi, C.M. and Varman, M. and Masjuki, Haji Hassan (2017) Investigation of Engine Emission with Diesel-Palm Biodiesel-Antioxidant Blend. In: 10th AUN/SEED-Net Regional Conference on Energy Engineering (RCEneE) 2017, 9-11 November 2017, Yangon, Myanmar.

Choi, J.R. and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar and Yong, K.W. and Poon, C.T. and Noor Azmi, M.A. and Omar, S.Z. and Chua, K.H. and Xu, F. and Safwani, W.K.Z.W. (2015) In situ normoxia enhances survival and proliferation rate of human adipose tissue-derived stromal cells without increasing the risk of tumourigenesis. PLoS ONE, 10 (1). e0115034. ISSN 1932-6203

Chong, L.L. and Ibrahim, S. and Vikineswary, S. (2004) Optimal light intensity for the growth of Rhodopseudomonas palustris strain B1 for application in sago and palm oil mill effluents treatment. In: Environmental biotechnology: Advancement in water and wastewater applications in the tropics : Selected proceedings of the IWA international conference held in Kuala Lumpur, Malaysia, 9-10 December 2003. IWA Publishing, London, pp. 283-290. ISBN 1843395037

Chong, W.Y. and Yap, Y.K. and Ahmad, Harith (2015) Low-Threshold Q-Switched Erbium-Doped Fiber Laser Using Molybdenum Disulphide Saturable Absorber Prepared Through Evaporitic Formation. IEEE Photonics Journal, 7 (6). ISSN 1943-0655

Chong, Wu Yi and Harun, Sulaiman Wadi and Ahmad, Harith (2004) Enhancement of Gain in L-Band Bismuth-Based Erbium-Doped Fibre Amplifier Using an Un-pumped EDF and Midway Isolator. Chinese Physics Letters, 21 (12). pp. 2452-2453. ISSN 0256-307X

Choong, C.E. and Ibrahim, S. and Yoon, Y. and Jang, M. (2018) Removal of lead and bisphenol A using magnesium silicate impregnated palm-shell waste powdered activated carbon: Comparative studies on single and binary pollutant adsorption. Ecotoxicology and Environmental Safety, 148. pp. 142-151. ISSN 0147-6513

Choudhury, D. and Roy, T. and Krupka, I. and Hartl, M. and Mootanah, R. (2015) Tribological investigation of ultra-high molecular weight polyethylene against advanced ceramic surfaces in total hip joint replacement. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 229 (4). pp. 410-419. ISSN 1350-6501

Choudhury, I.A. and Lee, C.Y. and Bhuiyan, M.S.H. and Nukman, Y. (2010) CETE91 tool condition monitoring using ae signal in turning of ASSAB-705 steel. In: World Engineering Congress 2010,Conference on Manufacturing Technology and Management, 2-5 August 2010, Kuching,Sarawak. (Unpublished)

Choudhury, I.A. and Lee, C.Y. and Bhuiyan, M.S.H. and Nukman, Y. (2010) Tool condition monitoring using ae signal in turning of assab-705 steel. In: World Engineering Congress 2010,Conference on Manufacturing Technology and Management, 2-5 August 2010, Kuching,Sarawak.

Cui, M. and Jang, M. and Cho, S.H. and Elena, D. and Khim, J. (2011) Enhancement in mineralization of a number of natural refractory organic compounds by the combined process of sonolysis and ozonolysis (US/O3). Ultrasonics Sonochemistry, 18 (3). pp. 773-780. ISSN 1350-4177

Cui, M. and Jang, M. and Cho, S.H. and Khim, J. (2010) Kinetic and thermodynamic studies of the adsorption of heavy metals on to a new adsorbent: coal mine drainage sludge. Environmental Technology, 31 (11). pp. 1203-1211. ISSN 0959-3330

Cui, M. and Jang, M. and Cho, S.H. and Khim, J. (2011) Potential application of sludge produced from coal mine drainage treatment for removing Zn(II) in an aqueous phase. Environmental Geochemistry and Health, 33 (SUPPL.). pp. 103-112. ISSN 0269-4042

Cui, M. and Jang, M. and Cho, S.H. and Khim, J. and Cannon, F.S. (2012) A continuous pilot-scale system using coal-mine drainage sludge to treat acid mine drainage contaminated with high concentrations of Pb, Zn, and other heavy metals. Journal of Hazardous Materials, 215-21. pp. 122-128. ISSN 0304-3894

Cui, M. and Jang, M. and Ibrahim, S. and Park, B. and Cho, E. and Khim, J. (2014) Arsenite removal using a pilot system of ultrasound and ultraviolet followed by microfiltration. Ultrasonics Sonochemistry, 21 (4). pp. 1527-1534. ISSN 1350-4177

Cui, M. and Jang, M. and Lee, S. and Khim, J. (2012) Sonochemical oxidation of cyanide using potassium peroxydisulfate as an oxidizing agent. Japanese Journal of Applied Physics, 51 (7). ISSN 0021-4922

Cui, M. and Jang, M. and Lee, S. and Kweon, B. and Yun, S.T. and Khim, J. (2011) Arsenite oxidation and treatment by ultrasound/iron in aqueous solutions. Japanese Journal of Applied Physics, 50 (7). ISSN 0021-4922

Cui, M. and Lee, S. and Jang, Min and Kweon, B. and Jo, H. and Khim, J. (2011) Sonochemical oxidation of arsenite in aqueous phase. Japanese Journal of Applied Physics, 50 (7 PART). ISSN 0021-4922

D

Dahalan, W.M. and Mokhlis, H. (2012) Network reconfiguration for loss reduction with distributed generations using PSO. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Dahalan, W.M. and Mokhlis, H. (2010) Techniques of network reconfiguration for service restoration in shipboard power system: a review. Australian Journal of Basic and Applied Sciences, 4 (11). pp. 5556-5563. ISSN 1991-8178

Dahalan, W.M. and Mokhlis, H. and Ahmad, R. and Bakar, A.H.A. and Musirin, I. (2014) Simultaneous Network Reconfiguration and DG Sizing Using Evolutionary Programming and Genetic Algorithm to Minimize Power Losses. Arabian Journal for Science and Engineering, 39 (8). pp. 6327-6338. ISSN 1319-8025

Dahalan, W.M. and Mokhlis, H. and Bakar, A.H.A. and Jamian, J.J. (2013) The simultaneous application of optimum network reconfiguration and distributed generation sizing using PSO for power loss reduction. Przegląd Elektrotechniczny, 89 (4). pp. 137-141. ISSN 00332097

Daosud, Wachira and Thitiyasook, Piyanuch and Arpornwichanop, Amornchai and Kittisupakorn, Paisan and Hussain, Mohamed Azlan (2005) Neural network inverse model-based controller for the control of a steel pickling process. Computers & Chemical Engineering, 29 (10). pp. 2110-2119. ISSN 00981354

Darain, K.M.U. and Jumaat, M.Z. and Hossain, M.A. and Hosen, M.A. and Obaydullah, M. and Huda, M.N. and Hossain, I. (2015) Automated serviceability prediction of NSM strengthened structure using a fuzzy logic expert system. Expert Systems with Applications, 42 (1). pp. 376-389. ISSN 0957-4174

Darain, K.M.U. and Jumaat, M.Z. and Hossain, M.A. and Hosen, M.A. and Obaydullah, M. and Huda, M.N. and Hossain, I. (2015) Automated serviceability prediction of NSM strengthened structure using a fuzzy logic expert system. Expert Systems with Applications, 42 (1). pp. 376-389. ISSN 0957-4174

Datta, I. and Datta, D. and Pande, P.P. (2013) Design methodology for optical interconnect Topologies in NoCs with BER and transmit power constraints. IEEE/OSA Journal of Lightwave Technology.

Datta, R.S. and Said, S.M. and Shahrir, S.R. and Abdullah, N. and Sabri, M.F.M. and Balamurugan, S. and Miyazaki, Y. and Hayashi, K. and Hashim, N.A. and Habiba, U. and Afifi, A.M. (2015) Ionic liquid entrapment by an electrospun polymer nanofiber matrix as a high conductivity polymer electrolyte. RSC Advances, 5 (60). pp. 48217-48223. ISSN 2046-2069

Daube, A.K. and Karim, M.R. and Dimmel, D.R. and McDonough, T.J. and Banerjee, S. (1992) Degradation of dibenzodioxin during chlorine dioxide bleaching of kraft pulp. Environmental Science & Technology, 26 (7). pp. 1324-1326. ISSN 0013-936X

Daud, W.M.A.W. and Ahmad, M.A. and Aroua, M.K. (2007) Carbon molecular sieves from palm shell: Effect of the benzene deposition times on gas separation properties. Separation and Purification Technology, 57 (2). pp. 289-293. ISSN 1383-5866

Davoodi, M.M. and Sapuan, S.M. and Aidy, A. and Abu Osman, Noor Azuan and Oshkour, A.A. and Wan Abas, Wan Abu Bakar (2012) Development process of new bumper beam for passenger car: a review. Materials & Design, 40. pp. 304-313. ISSN 0261-3069

Davoodi, M.M. and Sapuan, S.M. and Aidy, A. and Abu Osman, Noor Azuan and Oshkour, A.A. and Wan Abas, Wan Abu Bakar (2012) Development process of new bumper beam for passenger car: a review. Materials and Design, 40. pp. 304-313. ISSN 0261-3069

Dawal, S. and Tahriri, F. and Jen, Y. and Case, K. and Tho, N. and Zuhdi, A. and Mousavi, M. and Amindoust, A. and Sakundarini, N. (2015) Empirical evidence of AMT practices and sustainable environmental initiatives in malaysian automotive SMEs. International Journal of Precision Engineering and Manufacturing, 16 (6). pp. 1195-1203. ISSN 2234-7593

Debnath, S. and Said, S.M. and Roslan, M.F. and Sabri, M.F.M. and Long, B.D. (2015) A DFT study on an alkali atom doped decahedral silver nanocluster for potential application in opto-electronics and catalysis. RSC Advances, 5 (10). pp. 7665-7672. ISSN 2046-2069

Deboucha, S. and Hashim, Roslan (2011) Correlation between total water absorption and wet compressive strength of compressed stabilised peat bricks. International Journal of Physical Sciences, 6 (10). pp. 2432-2438. ISSN 19921950

Deboucha, S. and Hashim, Roslan (2009) Durability and swelling of tropical stabilized peat soils. Journal of Applied Sciences, 9 (13). pp. 2480-2484. ISSN 18125654

Deboucha, S. and Hashim, Roslan (2010) Effect of OPC and PFA cement on stabilised peat bricks. International Journal of the Physical Sciences, 5 (11). pp. 1671-1677. ISSN 1992-1950

Deboucha, S. and Hashim, Roslan (2011) A review on bricks and stabilized compressed earth blocks. Scientific Research and Essays, 6 (3). pp. 499-506. ISSN 1992-2248

Deboucha, S. and Hashim, Roslan and Alwi, A. (2008) Engineering properties of stabilized tropical peat soils. Electronic Journal of Geotechnical Engineering, 13 E. pp. 1-9. ISSN 10893032

Deboucha, S. and Hashim, Roslan and Aziz, A.A. (2011) Engineering properties of cemented peat bricks. Scientific Research and Essays, 6 (8). pp. 1732-1739. ISSN 19922248

Dhakshyani, R. and Nukman, Y. and Abu Osman, Noor Azuan (2012) Rapid prototyping models for dysplastic hip surgeries in Malaysia. European Journal of Orthopaedic Surgery and Traumatology, 22 (1). pp. 41-46. ISSN 1633-8065

Dhakshyani, R. and Nukman, Y. and Abu Osman, Noor Azuan and Merican, A.M. and George, J. (2010) Rapid prototyping medical models for dysplastic hip orthopaedic surgery. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 224 (B5). pp. 769-776. ISSN 0954-4054

Dhakshyani, R. and Nukman, Y. and Abu Osman, Noor Azuan and Vijay, C. (2011) Preliminary report: rapid prototyping models for Dysplastic hip surgery. Central European Journal of Medicine, 6 (3). pp. 266-270. ISSN 1895-1058

Dhakshyani, R. and Nukman, Y. and Azuan, A.N. (2012) FDM models and FEA in dysplastic hip. Rapid Prototyping Journal, 18 (3). pp. 215-221. ISSN 1355-2546

Dhananjaya, H.R. and Nagabhushanam, J. and Pandey, P.C. and Jumaat, M.Z. (2010) New twelve node serendipity quadrilateral plate bending element based on mindlin-reissner theory using integrated force method. Structural Engineering and Mechanics, 36 (5). pp. 625-642. ISSN 1225-4568

Dihayati, Y. and Aziz, A.R. and Abdullah, E.C. and Leong, Y.C. and Harcharan, S. (2007) Encapsulation method for CaCO3 nanoparticles. Journal of Applied Sciences, 7 (15). pp. 2046-2050.

Din, I.U. and Shaharun, M.S. and Naeem, A. and Tasleem, S. and Johan, M.R. (2017) Carbon nanofiber-based copper/zirconia catalyst for hydrogenation of CO2 to methanol. Journal of CO2 Utilization, 21. pp. 145-155. ISSN 2212-9820

Dishaw, I.J. and Muniandy, S. and Teh, S.J. and Ibrahim, F. and Leo, B.F. and Thong, Kwai Lin (2017) Development of an aptasensor using reduced graphene oxide chitosan complex to detect Salmonella. Journal of Electroanalytical Chemistry, 806. pp. 88-96. ISSN 1572-6657

Diya'uddeen, B.H. and Abdul Raman, A.A. and Daud, W.M.A.W. and Chakrabarti, M.H. (2012) Performance evaluation of biodiesel from used domestic waste oils: a review. Process Safety and Environmental Protection, 90 (3). pp. 164-179. ISSN 09575820 (ISSN)

Diya'uddeen, B.H. and Daud, W.M.A.W. and Abdul Aziz, A.R. (2011) Treatment technologies for petroleum refinery effluents: a review. Process Safety and Environmental Protection, 89 (2). pp. 95-105. ISSN 09575820 (ISSN)

Dlamini, N.S. and Kamal, M.R. and Soom, M.A.B.M. and Mohd, M.S.F. and Abdullah, A.F. and Lai, S.H. (2017) Modeling Potential Impacts of Climate Change on Streamflow Using Projections of the 5th Assessment Report for the Bernam River Basin, Malaysia. Water, 9 (3). p. 226. ISSN 2073-4441

Doufesh, H. and Faisal, T. and Lim, K.S. and Ibrahim, F. (2012) EEG spectral analysis on muslim prayers. Applied Psychophysiology Biofeedback, 37 (1). pp. 11-18. ISSN 1090-0586

Doufesh, H. and Ibrahim, F. and Ismail, N.A. and Wan Ahmad, W.A. (2016) Adaptive neuro-fuzzy inference system for predicting alpha band power of EEG during muslim prayer (SALAT). Biomedical Engineering: Applications, Basis and Communications, 28 (06). p. 1650043. ISSN 1016-2372

Doufesh, H. and Ibrahim, F. and Ismail, N.A. and Wan Ahmad, W.A. (2013) Assessment of heart rates and blood pressure in different Salat positions. Journal of Physical Therapy Science, 25 (2). pp. 211-214. ISSN 0915-5287

E

E., Maleki and K., Aroua M. and N., Sulaiman N.M. (2013) Castor oil - A more suitable feedstock for enzymatic production of methyl esters. Fuel Processing Technology, 112. pp. 129-132. ISSN 0378-3820

E., Maleki and K., Aroua M. and N., Sulaiman N.M. (2013) Improved yield of solvent free enzymatic methanolysis of palm and jatropha oils blended with castor oil. Applied Energy, 104. pp. 905-909. ISSN 0306-2619

Edi, P. and Yusuf, K. and Ghani, A.R.A. (2009) The conceptual design of very light jet. In: 11th WSEAS International Conference on Mathematical Methods, Computational Techniques and Intelligent Systems/8th WSEAS NOLASC 2009/5th WSEAS CONTROL 2009, JUL 01-03, 2009 , Univ La Laguna, Tenerife, SPAIN.

Esfe, Mohammad Hemmat and Saedodin, Seyfolah and Naderi, Ali and Alirezaie, Ali and Karimipour, Arash and Wongwises, Somchai and Goodarzi, Marjan and Dahari, Mahidzal (2015) Modeling of thermal conductivity of ZnO-EG using experimental data and ANN methods. International Communications in Heat and Mass Transfer, 63. pp. 35-40. ISSN 0735-1933

Eshraghi, A. and Abu Osman, Noor Azuan and Gholizadeh, H. and Ahmadian, J. and Rahmati, B. and Wan Abas, Wan Abu Bakar (2013) Development and evaluation of new coupling system for lower limb prostheses with acoustic alarm system. Scientific Reports, 3. p. 2270. ISSN 2045-2322

Eshraghi, A. and Abu Osman, Noor Azuan and Gholizadeh, H. and Ali, S. and Sævarsson, S.K. and Wan Abas, Wan Abu Bakar (2013) An experimental study of the interface pressure profile during level walking of a new suspension system for lower limb amputees. Clinical Biomechanics, 28 (1). pp. 55-60. ISSN 0268-0033

Eshraghi, A. and Abu Osman, Noor Azuan and Gholizadeh, H. and Ali, S. and Wan Abas, Wan Abu Bakar (2015) Interface stress in socket/residual limb with transtibial prosthetic suspension systems during locomotion on slopes and stairs. American Journal of Physical Medicine & Rehabilitation, 94 (1). pp. 1-10. ISSN 0894-9115

Eshraghi, A. and Abu Osman, Noor Azuan and Karimi, M.T. and Gholizadeh, H. and Ali, S. and Wan Abas, Wan Abu Bakar (2012) Quantitative and qualitative comparison of a new prosthetic suspension system with two existing suspension systems for lower limb amputees. American Journal of Physical Medicine and Rehabilitation, 91 (12). pp. 1028-1038. ISSN 0894-9115

Eshraghi, A. and Gholizadeh, H. and Abu Osman, N.A. (2011) Comments on "assessment of amputee socket-stump-residual bone kinematics during strenuous activities using Dynamic Roentgen stereogrammetric analysis". Journal of Biomechanics, 44 (16). pp. 2851-2852. ISSN 0021-9290

Eshraghi, A. and Maroufi, N. and Sanjari, M.A. and Saeedi, H. and Keyhani, M.R. and Gholizadeh, H. and Osman, N.A.A. (2012) Effect of Milwaukee brace on static and dynamic balance of female hyperkyphotic adolescents. Prosthetics and Orthotics International. ISSN 0309-3646

F

Fahami, A. and Beall, G.W. and Nasiri-Tabrizi, B. and Pingguan-Murphy, B. (2015) Effect of high-energy ball milling on the formation and microstructural features of carbonated chlorapatite nanopowders. Ceramics International, 41 (3). pp. 4750-4758. ISSN 0272-8842

Fahami, A. and Nasiri-Tabrizi, B. and Beall, G.W. and Pingguan-Murphy, B. (2015) Effect of ion concentration on mechanosynthesis of carbonated chlorapatite nanopowders. Materials Letters, 146. pp. 16-19. ISSN 0167-577X

Fairuz, Z.A. and Aiyub, Z. and Abdullah, Z. and Ng, S.W. and Tiekink, E.R.T. (2011) 4-Methyl-N-(3-methylphenyl)pyridin-2-amine. Acta Crystallographica Section E: Structure Reports Online, 67 (Pt. 11). o3078. ISSN 1600-5368

Faisal, T. and Ibrahim, F. and Taib, M.N. (2008) Analysis of significant factors for dengue infection prognosis using the self organizing map. Conference proceedings : Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference, 2008. pp. 5140-5143. ISSN 1557170X

Faisal, T. and Ibrahim, F. and Taib, M.N. (2008) Determination of the bioimpedance analysis parameters in dengue patients using the self organizing map. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Faisal, T. and Ibrahim, F. and Taib, M.N. (2010) A noninvasive intelligent approach for predicting the risk in dengue patients. Expert Systems with Applications, 37 (3). pp. 2175-2181. ISSN 0957-4174

Faisal, T. and Taib, M.N. and Ibrahim, F. (2012) Adaptive Neuro-Fuzzy Inference System for diagnosis risk in dengue patients. Expert Systems with Applications, 39 (4). pp. 4483-4495. ISSN 0957-4174

Faisal, T. and Taib, M.N. and Ibrahim, F. (2012) Neural network diagnostic system for dengue patients risk classification. Journal of Medical Systems, 36 (2). pp. 661-676. ISSN 0148-5598

Faisal, T. and Taib, M.N. and Ibrahim, F. (2010) Reexamination of risk criteria in dengue patients using the self-organizing map. Medical and Biological Engineering and Computing, 48 (3). pp. 293-301. ISSN 0140-0118

Far, M.R.H. and Jumaat, M.Z. and Vahid Razavi T., S. and Mohammadi, P. and Mohammadi, H. (2011) Nonlinear analysis of load-deflection testing of reinforced one-way slab strengthened by carbon fiber reinforced polymer (CFRP) and using artificial neural network (ANN) for prediction. International Journal of Physical Sciences, 6 (13). pp. 3054-3061. ISSN 19921950

Faradonbeh, M.A. and Bin Mokhlis, H. (2011) Unbalance fault location in electrical distribution system. In: Electrical Power Distribution Networks (EPDC), 2011 16th Conference on, 2011.

Faradonbeh, M.A. and Bin Mokhlis, H. and Karimi, M. and Shahariari, A. (2011) Balance and single line to ground fault location in electrical distribution system. In: Power Engineering and Optimization Conference (PEOCO), 2011 5th International, 2011, Shah Alam, Selangor (Malaysia).

Faraji, G. and Ebrahimi, M. and Bushroa, A.R. (2014) Ultrasonic assisted tubular channel angular pressing process. Materials Science and Engineering: A, 599. pp. 10-15. ISSN 0921-5093

Faraji, G. and Mashhadi, M.M. and Bushroa, A.R. and Babaei, A. (2013) TEM analysis and determination of dislocation densities in nanostructured copper tube produced via parallel tubular channel angular pressing process. Materials Science and Engineering: A, 563. pp. 193-198. ISSN 0921-5093

Farhan, M.S. and Zalnezhad, E. and Bushroa, A.R. (2013) Investigation of optical and structural properties of ion-assisted deposition (IAD) ZrO2 thin films. International Journal of Precision Engineering and Manufacturing, 14 (11). pp. 1997-2002. ISSN 2234-7593

Farhan, M.S. and Zalnezhad, E. and Bushroa, A.R. (2013) Properties of Ta2O5 thin films prepared by ion-assisted deposition. Materials Research Bulletin, 48 (10). pp. 4206-4209. ISSN 0025-5408

Fariborzi, H. and Moghavvemi, M. (2007) Architecture of a wireless sensor network for vital signs transmission in hospital setting. In: 2nd International Conference on Convergent Information Technology, ICCIT 07, 21 - 23 November 2007, Gyongju, South Korea..

Fariborzi, H. and Moghavvemi, M. (2009) EAMTR: Energy aware multi-tree routing for wireless sensor networks. IET Communications, 3 (5). pp. 733-739. ISSN 17518628

Fariborzi, H. and Moghavvemi, M. (2009) Wireless monitoring of cardiac activity: a critical review. International Journal of Biomedical Engineering and Technology, 2 (1). pp. 4-28. ISSN 17526418

Fariborzi, H. and Moghavvemi, M. and Mehrkanoon, S. (2007) Design of a low-power microcontroller-based wireless ECG monitoring system. In: 2007 5th Student Conference on Research and Development, SCORED , 11-12 December 2007, Selangor, Malaysia.

Fariborzi, H. and Moghavvemi, M. and Mehrkanoon, S. (2007) The design of an intelligent wireless sensor network for ubiquitous healthcare. In: 2007 International Conference on Intelligent and Advanced Systems, ICIAS 2007 , 25 - 28 November 2007, Kuala Lumpur, Malaysia..

Faridah, O. and Alaa Eldin, M.E. (2014) Linking the water quality model with the real-time map and ambient phenomena. In: International Conference on Innovative Trends in Multidisciplinary Academic Research, 20 – 21 October 2014, Istanbul, Turkey.

Faruque, M.O. and Moghavvemi, Mahmoud (2004) Real-time estimation of power margin from on-line data accumulated through localized measurements. International Journal of Engineering Intelligent Systems for Electrical Engineering and Communications, 12 (3). pp. 151-158. ISSN 1472-8915

Farzadi, A. and Waran, V. and Solati-Hashjin, M. and Rahman, Z.A.A. and Asadi, M. and Abu Osman, Noor Azuan (2015) Effect of layer printing delay on mechanical properties and dimensional accuracy of 3D printed porous prototypes in bone tissue engineering. Ceramics International, 41 (7). pp. 8320-8330. ISSN 0272-8842

Fayaz, H. and Rahim, N.A. and Saidur, R. and Solangi, K.H. and Niaz, H. and Hossain, M.S. (2011) Solar energy policy: Malaysia vs developed countries. In: 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011, 2011, Kuala Lumpur.

Fayyadh, M.M. and Abdul Razak, H. (2011) Application of weighted average on modal parameters for damage detection algorithms: Case study on steel beam. International Journal of Physical Sciences, 6 (25). pp. 5912-5921. ISSN 19921950

Fayyadh, M.M. and Abdul Razak, H. (2012) Assessment of adhesive setting time in reinforced concrete beams strengthened with carbon fibre reinforced polymer laminates. Materials & Design, 37. pp. 64-72. ISSN 0261-3069

Fayyadh, M.M. and Abdul Razak, H. (2012) Assessment of effectiveness of CFRP repaired RC beams under different damage levels based on flexural stiffness. Construction and Building Materials, 37. pp. 125-134. ISSN 09500618

Fayyadh, M.M. and Abdul Razak, H. (2012) Condition assessment of elastic bearing supports using vibration data. Construction and Building Materials, 30. pp. 616-628. ISSN 0950-0618

Fayyadh, M.M. and Abdul Razak, H. (2011) Detection of damage location using mode shape deviation: Numerical study. International Journal of Physical Sciences, 6 (24). pp. 5688-5698. ISSN 19921950

Fayyadh, M.M. and Abdul Razak, H. (2011) Weighting method for modal parameter based damage detection algorithms. International Journal of Physical Sciences, 6 (20). pp. 4816-4825. ISSN 19921950

Fayyadh, M.M. and Abdul Razak, H. and Khaleel, O.R. (2011) Differential effects of support conditions on dynamic parameters. In: 12th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC12, 2011, Hong Kong.

Fayyadh, M.M. and Akib, S. and Othman, I. and Razak, H.A. (2011) Experimental investigation and finite element modelling of the effects of flow velocities on a skewed integral bridge. Simulation Modelling Practice and Theory, 19 (9). pp. 1795-1810. ISSN 1569-190X

Fayyadh, M.M. and Razak, H.A. (2013) Analytical and experimental study on repair effectiveness of CFRP sheets for RC beams. Journal of Civil Engineering and Management. pp. 1-11. ISSN 13923730

Fayyadh, M.M. and Razak, H.A. (2013) Damage Identification and Assessment in Rc Structures Using Vibration Data: A Review. Journal of Civil Engineering and Management, 19 (3). pp. 375-386. ISSN 1392-3730

Fayyadh, M.M. and Razak, H.A. (2011) Modified damage location indices in beam-like structure: Analytical study. Scientific Research and Essays, 6 (32). pp. 6605-6621. ISSN 19922248

Fayyadh, M.M. and Razak, H.A. (2011) Stiffness reduction index for detection of damage location: Analytical study. International Journal of Physical Sciences, 6 (9). pp. 2194-2204. ISSN 19921950

Fayyadh, M.M. and Razak, H.A. (2010) The effect of support condition on dynamic parameters. In: 17th International Congress on Sound and Vibration 2010, ICSV 2010, 2010, Cairo.

Fayyadh, M.M. and Razak, H.A. and Ismail, Z. (2011) Combined modal parameters-based index for damage identification in a beamlike structure: theoretical development and verification. Archives of Civil and Mechanical Engineering, 11 (3). pp. 587-609. ISSN 1644-9665

Fayyadh, M.M. and Razak, Hashim Abdul and Akib, S. (2010) Ultimate capacity and reinforcement area requirement for bridge girder using various FRP re-bars. International Journal of the Physical Sciences, 5 (17). pp. 2635-2641. ISSN 1992-1950

Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2010) Comparative corrosive characteristics of petroleum diesel and palm biodiesel for automotive materials. Fuel Processing Technology, 91 (10). pp. 1308-1315.

Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2013) Corrosion mechanism of copper in palm biodiesel. Corrosion Science, 67. pp. 50-59. ISSN 0010-938X

Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2012) Degradation of automotive materials in palm biodiesel. Energy, 40 (1). pp. 76-83. ISSN 0360-5442

Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2011) Effect of different corrosion inhibitors on the corrosion of cast iron in palm biodiesel. Fuel Processing Technology, 92 (11). pp. 2154-2159. ISSN 0378-3820

Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2011) Effect of temperature on the corrosion behavior of mild steel upon exposure to palm biodiesel. Energy, 36 (5). pp. 3328-3334. ISSN 0360-5442

Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2013) Investigation of friction and wear characteristics of palm biodiesel. Energy Conversion and Management, 67. pp. 251-256. ISSN 0196-8904

Fazal, M.A. and Rathinee, B. and Masjuki, Haji Hassan (2016) Corrosion of phosphorus bronze in different biodiesel blends and its remedial measures. In: 17th Asian Pacific Corrosion Control Conference, 27-30 January 2016, IIT Bombay, Mumbai, India.

Fazal, M.A. and Rathinee, B. and Masjuki, Haji Hassan (2016) Corrosion of phosphorus bronze in different biodiesel blends and its remedial measures. In: 17th Asian Pacific Corrosion Control Conference, 27 - 30 January 2016, IIT Bombay, Mumbai, India.

Ferdiansyah, T. and Razak, H.A. (2011) Mechanical properties of black sugar palm fiber-reinforced concrete. Journal of Reinforced Plastics and Composites, 30 (11). pp. 994-1004. ISSN 0731-6844

Fitri, A. and Hashim, R. and Song, K. and Motamedi, S. (2015) Evaluation of morphodynamic changes in the vicinity of low-crested breakwater on cohesive shore of carey island, Malaysia. Coastal Engineering Journal, 57 (4). ISSN 0578-5634

Foong, K.Y. and Alengaram, U.J. and Jumaat, M.Z. and Mo, K.H. (2015) Enhancement of the mechanical properties of lightweight oil palm shell concrete using rice husk ash and manufactured sand. Journal of Zhejiang University Science A, 16 (1). pp. 59-69. ISSN 1673-565X

Fuad, M.N.M. and Hussain, M.A. and Zakaria, A. (2012) Optimization strategy for long-term catalyst deactivation in a fixed-bed reactor for methanol synthesis process. Computers & Chemical Engineering, 44. pp. 104-126. ISSN 0098-1354

G

Gaeid, K.S. and Ping, H.W. (2010) Induction motor fault detection and isolation through unknown input observer. Scientific Research and Essays, 5 (20). pp. 3152-3159. ISSN 1992-2248

Gaeid, K.S. and Ping, H.W. and Khalid, M. and Masaoud, A. (2012) Sensor and sensorless fault tolerant control for induction motors using a wavelet index. Sensors (Basel), 12 (4).

Gamil, A.A.A. and Mekhilef, S. and Said, S.M. (2012) Techno economic analysis of using solar water heaters with evacuated tubes in Khartoum, Sudan. Energy Education Science and Technology Part A: Energy Science and Research, 28 (2). pp. 611-622. ISSN 1308772X

Ghadimi, A. and Saidur, Rahman and Metselaar, H.S.C. (2011) A review of nanofluid stability properties and characterization in stationary conditions. International Journal of Heat and Mass Transfer, 54 (17-18). pp. 4051-4068. ISSN 0017-9310

Ghadiry, M. and Ahmad, Harith and Lai, C.K. and Chong, W.Y. and Lee, S.H. and Tan, W.K. and Chu, K.K. (2016) A New Hybrid Highly Sensitive Optical Humidity Sensor. Sensor Letters, 14 (6). pp. 583-587. ISSN 1546-198X

Ghafari, S. and Aroua, M.K. and Hasan, M. (2010) Control of pH during water denitrification in an upflow bio-electrochemical reactor (UBER) using a pumparound system. Separation and Purification Technology, 72 (3). pp. 401-405. ISSN 1383-5866

Ghafari, S. and Hasan, M. and Aroua, M.K. (2008) Bio-electrochemical removal of nitrate from water and wastewater-A review. Bioresource Technology, 99 (10). pp. 3965-3974. ISSN 0960-8524

Ghafari, S. and Hasan, M. and Aroua, M.K. (2009) Denitrification of surface and ground water applying autohydrogenotrophic bacteria in a novel upflow bio-electrochemical reactor(UBER). In: CHEMECA Conference 2009, 27-30 Sept 2009, Perth, Australia.

Ghafari, S. and Hasan, M. and Aroua, M.K. (2009) Effect of carbon dioxide and bicarbonate as inorganic carbon sources on growth and adaptation of autohydrogenotrophic denitrifying bacteria. Journal of Hazardous Materials, 162 (2-3). pp. 1507-1513. ISSN 0304-3894

Ghafari, S. and Hasan, M. and Aroua, M.K. (2009) Improvement of autohydrogenotrophic nitrite reduction rate through optimization of pH and sodium bicarbonate dose in batch experiments. Journal of Bioscience and Bioengineering, 107 (3). pp. 275-280. ISSN 1389-1723

Ghafari, S. and Hasan, M. and Aroua, M.K. (2009) Nitrate remediation in a novel upflow bio-electrochemical reactor (UBER) using palm shell activated carbon as cathode material. Electrochimica Acta, 54 (17). pp. 4164-4171. ISSN 0013-4686

Ghafari, S. and Hasan, M. and Aroua, M.K. (2010) A kinetic study of autohydrogenotrophic denitrification at the optimum pH and sodium bicarbonate dose. Bioresource Technology, 101 (7). pp. 2236-2242. ISSN 0960-8524

Ghasem, N.M. and Ang, W.L. and Hussain, M.A. (2008) Dynamic model for polyethylene production in a multizone circulating reactor. Chemical Product and Process Modeling, 3 (1). ISSN 19342659

Ghasem, N.M. and Ang, W.L. and Hussain, M.A. (2009) Dynamics and stability of ethylene polymerization in multizone circulating reactors. Korean Journal of Chemical Engineering, 26 (3). pp. 603-611. ISSN 0256-1115

Ghasem, N.M. and Hussain, M.A. (2004) Stabilization of the dynamic behavior of a UNIPOL process for polyethylene production. Developments in Chemical Engineering and Mineral Processing, 12 (1-2). pp. 199-216. ISSN 0969-1855

Ghasem, N.M. and Hussain, M.A. and Mujtaba, I.M. (2003) The use of simulink block diagram to solve mathematical model and control equations. Design and Technology, 8 (2). pp. 42-48. ISSN 0122-7483

Ghasem, N.M. and Hussain, M.A. and Sata, S.A. (2006) Application of model predictive control to batch polymerization reactor. Revista de la Facultad de Ciencias, 11 (1). pp. 49-58. ISSN 0122-7483

Ghasem, N.M. and Sata, S.A. and Hussain, M.A. (2007) Temperature control of a bench-scale batch polymerization reactor for polystyrene production. Chemical Engineering & Technology, 30 (9). pp. 1193-1202. ISSN 0930-7516

Ghasem, N.M. and Sulaiman, M.Z. and Hussain, M.A. (2005) Simulation, optimization and parametric studies of a solid catalyzed gas phase ethylene polymerization fluidized bed reactor. Journal of Chemical Engineering of Japan, 38 (3). pp. 171-175. ISSN 0021-9592

Ghavimi, S.A.A. and Ebrahimzadeh, M.H. and Solati-Hashjin, M. and Abu Osman, Noor Azuan (2015) Polycaprolactone/starch composite: Fabrication, structure, properties, and applications. Journal of Biomedical Materials Research Part A, 103 (7). pp. 2482-2498. ISSN 1549-3296

Ghayed, H.H. and Razak, H.A. and Sulong, N.H.R. (2017) Development and testing of hybrid precast concrete beam-to-column connections under cyclic loading. Construction and Building Materials, 151. pp. 258-278. ISSN 0950-0618

Ghazali, N.N.N. and Yau, Y.H. and Badarudin, A. and Lim, Y.C. (2009) Computational fluid dynamics simulation of drag reduction by riblets on automobile. In: International Symposium on Computational Mechanics and 12th International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science, 29 Nov-3 Dec 2009, Macau, Hong Kong.

Gheitasi, A. and Moghavvemi, M. and Omar, R. (2009) Automatic protection system for slow rate events in power systems. In: 2009 IEEE Student Conference on Research and Development, SCOReD 2009, 16-18 November 2009, Serdang, Malaysia.

Gheitasi, A. and Moghavvemi, M. and Omar , R. (2009) Speed variant motor fault diagnosis applying significant frequency bands. In: 2009 IEEE Student Conference on Research and Development, SCOReD 2009, 16-18 November 2009, Serdang, Malaysia.

Gholizadeh, H. and Abu Osman, Noor Azuan and Eshraghi, A. and Ali, S. and Arifin, N. and Wan Abas, W.A.B. (2014) Evaluation of new suspension system for limb prosthetics. BioMedical Engineering Online, 13 (1). pp. 1-13. ISSN 1475-925X

Gholizadeh, H. and Abu Osman, Noor Azuan and Eshraghi, A. and Ali, S. and Sævarsson, S.K. and Wan Abas, Wan Abu Bakar and Pirouzi, G.H. (2012) Transtibial prosthetic suspension: less pistoning versus easy donning and doffing. Journal of Rehabilitation Research and Development, 49 (9). pp. 1321-1330. ISSN 0748-7711

Gholizadeh, H. and Abu Osman, Noor Azuan and Kamyab, M. and Eshraghi, A. and Luviksdottir, A.G. and Wan Abas, Wan Abu Bakar (2012) Clinical evaluation of two prosthetic suspension systems in a bilateral transtibial amputee. American Journal of Physical Medicine & Rehabilitation, 91 (10). pp. 894-898. ISSN 0894-9115

Gholizadeh, H. and Abu Osman, Noor Azuan and Kamyab, M. and Eshraghi, A. and Lúvíksdóttir, A.G. and Wan Abas, Wan Abu Bakar (2012) Clinical evaluation of two prosthetic suspension systems in a bilateral transtibial amputee. American Journal of Physical Medicine and Rehabilitation, 91 (10). pp. 894-898. ISSN 0894-9115

Gholizadeh, H. and Abu Osman, Noor Azuan and Kamyab, M. and Eshraghi, A. and Wan Abas, Wan Abu Bakar and Azam, M.N. (2012) Transtibial prosthetic socket pistoning: Static evaluation of Seal-In (R) X5 and Dermo (R) Liner using motion analysis system. Clinical Biomechanics, 27 (1). pp. 34-39. ISSN 0268-0033

Gholizadeh, H. and Abu Osman, Noor Azuan and Kamyab, M. and Eshraghi, A. and Wan Abas, Wan Abu Bakar and Azam, M.N. (2012) Transtibial prosthetic socket pistoning: static evaluation of Seal-In((R)) X5 and Dermo((R)) Liner using motion analysis system. Clinical Biomechanics, 27 (1). pp. 34-39. ISSN 0268-0033

Gholizadeh, H. and Abu Osman, Noor Azuan and Luviksdottir, A. and Eshraghi, A. and Kamyab, M. and Wan Abas, Wan Abu Bakar (2011) A new approach for the pistoning measurement in transtibial prosthesis. Prosthetics and Orthotics International, 35 (4). pp. 360-364. ISSN 0309-3646

Gholizadeh, H. and Abu Osman, Noor Azuan and Luviksdottir, A.G. and Eshraghi, A. and Kamyab, M. and Wan Abas, Wan Abu Bakar (2011) A new approach for the pistoning measurement in transtibial prosthesis. Prosthetics and Orthotics International, 35 (4). pp. 360-364. ISSN 0309-3646

Gholizadeh, H. and Abu Osman, Noor Azuan and Luviksdottir, A.G. and Kamyab, M. and Eshraghi, A. and Ali, S. and Wan Abas, Wan Abu Bakar (2011) A new method for measuring pistoning in lower limb prosthetic. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Goh, Y. and Haseeb, A.S. Md. Abdul and Sabri, M.F.M. (2013) Electrodeposition of lead‐free solder alloys. Soldering & Surface Mount Technology, 25 (2). pp. 76-90. ISSN 0954-0911

Goh, Y. and Haseeb, A.S. Md. Abdul and Sabri, Mohd Faizul Mohd (2013) Effects of hydroquinone and gelatin on the electrodeposition of Sn–Bi low temperature Pb-free solder. Electrochimica Acta, 90. pp. 265-273. ISSN 0013-4686

Gordan, M. and Ismail, Z. and Razak, H.A. and Ibrahim, Z. (2017) Vibration-based structural damage identification using data mining. In: 24th International Congress on Sound and Vibration (ICSV24) 2017, 23-27 July 2017, Park Plaza Westminster Bridge Hotel, London, United Kingdom.

Greaves, M.A. and Mujtaba, I.M. and Barolo, M. and Trotta, A. and Hussain, M.A. (2002) Dynamic optimisation of batch distillation with a middle vessel using neural network techniques. Computer Aided Chemical Engineering, 10. pp. 505-510. ISSN 1570-7946

Greaves, M.A. and Mujtaba, I.M. and Barolo, M. and Trotta, A. and Hussain, M.A. (2003) Neural-network approach to dynamic optimization of batch distillation: Application to a middle-vessel column. Chemical Engineering Research & Design, 81 (A3). pp. 393-401. ISSN 0263-8762

Gunnasegaran, P. and Mohammed, H.A. and Shuaib, N.H. and Saidur, R. (2010) The effect of geometrical parameters on heat transfer characteristics of microchannels heat sink with different shapes. International Communications in Heat and Mass Transfer, 37 (8). pp. 1078-1086. ISSN 0735-1933

Gupta, B.S. and Chandrasekaran, S. and Ibrahim, S. (2005) Technologies for sewer rehabilitation in Malaysia. Trenchless Australasia, 3. pp. 19-21. ISSN 1832-0562

Gupta, B.S. and Chandrasekaran, S. and Ibrahim, S. (2001) A survey of sewer rehabilitation in Malaysia: application of trenchless technologies. Urban Water, 3 (4). pp. 309-315.

Gupta, B.S. and Lim, K.S. and Ibrahim, S. and Hashim, M.A. (2001) Effect of Low Stirring Rate on the Attrition of NaCl Crystals in a Mechanically Stirred Crystallizer. Chemie Ingenieur Technik - CIT, 73 (6). p. 704. ISSN 0009-286X

Gurung, A. and Kim, S.H. and Joo, J.H. and Jang, M. and Oh, S.E. (2012) Assessing toxicities of industrial effluents and 1,4-dioxane using sulphur-oxidising bacteria in a batch test. Water and Environment Journal, 26 (2). pp. 224-234. ISSN 1747-6585

H

Habibullah, M. and Masjuki, Haji Hassan and Kalam, M.A. and Zulkifli, N.W.M. and Masum, B.M. and Arslan, A. and Gulzar, M. (2015) Friction and wear characteristics of Calophyllum inophyllum biodiesel. Industrial Crops and Products, 76. pp. 188-197. ISSN 0926-6690

Haghshenasfard, M. and Yeoh, G.H. and Dahari, M. and Hooman, K. (2015) On numerical study of calcium sulphate fouling under sub-cooled flow boiling conditions. Applied Thermal Engineering, 81. pp. 18-27. ISSN 1359-4311

Haider, H.A.M. and Yusoff, R. and Aroua, M.K. (2011) Equilibrium solubility of carbon dioxide in 2(methylamino)ethanol. Fluid Phase Equilibria, 303 (2). pp. 162-167. ISSN 0378-3812

Haj-Taieb, M. and Haseeb, A.S. Md. Abdul and Caulfield, J. and Bade, Klaus and Aktaa, J. and Hemker, K.J. (2008) Thermal stability of electrodeposited LIGA Ni-W alloys for high temperature MEMS applications. Microsystem Technologies, 14 (9-11). pp. 1531-1536. ISSN 0946-7076

Haji Hassan, M. and Kalam, M.A. and Ishak, A. and Khair, M. and Shahrir, A. and Yusof, A. (2009) Experimental test of a new dedicated natural gas engine. In: International Engineering Convention, 11-14 May 2009, Damascus, Syria. (Submitted)

Haji Hassan, M. and Sattar, M.A. and Mahlia, T.M.I. and Kalam, M.A. and Husnawan, M. and Saidur, R. (2009) Significance of journal paper publication and guideline in postgraduate study. In: International Engineering Education Conference 2009, 16-19 May 2009, Madinah, Saudi Arabia.

Haji-Sulaiman, M.Z. and Aroua, M.K. (1997) Activation energy for the oxidation of Malaysian coal chars. Journal of the Institute of Energy, 70 (483). pp. 52-56. ISSN 0144-2600

Haji-Sulaiman, M.Z. and Aroua, M.K. and Benamor, A. (1998) Analysis of equilibrium data of CO2 in aqueous solutions of diethanolamine (DEA), methyldiethanolamine (MDEA) and their mixtures using the modified Kent Eisenberg model. Chemical Engineering Research & Design, 76 (A8). pp. 961-968. ISSN 0263-8762

Haji-Sulaiman, M.Z. and Aroua, M.K. and Pervez, M.I. (1996) Equilibrium concentration profiles of species in CO2-alkanolamine-water systems. Gas Separation and Purification, 10 (1). pp. 13-18. ISSN 0950-4214

Haji-Sulaiman, M.Z. and Aroua, Mohamed Kheireddine (1996) Equilibrium of CO2 in aqueous diethanolamine (DEA) and Amino Methyl Propanol (AMP) solutions. Chemical Engineering Communications, 140. pp. 157-171. ISSN 0098-6445

Hajimolana, S. and Hussain, M.A. and Soroush, M. and Wan Daud, W.A. and Chakrabarti, M.H. (2012) Multilinear-model predictive control of a tubular solid oxide fuel cell system. Industrial & Engineering Chemistry Research, 52 (1). pp. 430-441. ISSN 0888-5885

Hajimolana, S.A. and Hussain, M.A. and Daud, W.M.A.W. and Chakrabarti, M.H. (2012) Dynamic modelling and sensitivity analysis of a tubular SOFC fuelled with NH3 as a possible replacement for H2. Chemical Engineering Research and Design, 90 (11). pp. 1871-1882. ISSN 02638762

Hajimolana, S.A. and Hussain, M.A. and Daud, W.M.A.W. and Chakrabarti, M.H. (2012) Neural network predictive control of a SOFC fuelled with ammonia. International Journal of Electrochemical Science, 7 (4). pp. 3737-3749. ISSN 1452-3981

Hajimolana, S.A. and Hussain, M.A. and Daud, W.M.A.W. and Soroush, M. and Shamiri, A. (2011) Mathematical modeling of solid oxide fuel cells: A review. Renewable & Sustainable Energy Reviews, 15 (4). pp. 1893-1917. ISSN 1364-0321

Hajimolana, S.A. and Hussain, M.A. and Natesan, J. and Tonekaboni Moghaddam, S.M. (2012) Neural network predictive control of a tubular solid oxide fuel cell. Computer Aided Chemical Engineering, 31. pp. 390-394. ISSN 15707946

Hajimolana, S.A. and Hussain, M.A. and Soroush, M. and Daud, W.M.A.W. and Chakrabarti, M.H. (2012) Modeling of a tubular-SOFC: the effect of the thermal radiation of fuel components and CO participating in the electrochemical process. Fuel Cells, 12 (5). pp. 761-772. ISSN 1615-6846

Hakim, S.J.S. and Abdul Razak, H. (2013) Adaptive Neuro Fuzzy Inference System (ANFIS) and Artificial Neural Networks (ANNs) for structural damage identification. Structural Engineering and Mechanics, 45 (6). pp. 779-802. ISSN 1225-4568

Hakim, S.J.S. and Abdul Razak, H. (2011) Application of artificial neural network on vibration test data for damage identification in bridge girder. International Journal of the Physical Sciences, 6 (35). pp. 7991-8001. ISSN 1992-1950

Hakim, S.J.S. and Abdul Razak, H. (2012) Damage detection of steel bridge girder using Artificial Neural Networks. In: 5th International Conference on Emerging Technologies in Non-Destructive Testing, NDT, 2012, Ioannina.

Hakim, S.J.S. and Abdul Razak, H. (2013) Structural damage detection of steel bridge girder using artificial neural networks and finite element models. Steel and Composite Structures, 14 (4). pp. 367-377. ISSN 1229-9367

Hakim, S.J.S. and Razak, H.A. (2012) Damage identification using experimental modal analysis and adaptive neuro-fuzzy interface system (ANFIS). In: 30th IMAC, A Conference on Structural Dynamics, 2012, 2012, Jacksonville, FL.

Hamad, F.A. and Ganesan, P. (2015) Effect of drops on turbulence of kerosene-water two-phase flow in vertical pipe. International Journal of Heat and Fluid Flow, 56. pp. 152-159. ISSN 0142-727X

Hamah-Ali, B. and Ali, B.S. and Yusoff, R. and Aroua, M.K. (2011) Corrosion of carbon steel in aqueous carbonated solution of MEA/bmimDCA. International Journal of Electrochemical Science, 6. pp. 181-198. ISSN 1452-3981

Hambali, A. and Sapuan, S.M. and Rahim, A.S. and Ismail, N. and Nukman, Y. (2011) Concurrent decisions on design concept and material using analytical hierarchy process at the conceptual design stage. Concurrent Engineering-Research and Applications, 19 (2). pp. 111-121. ISSN 1063-293X

Hamida, B.A. and Cheng, X.S. and Harun, Sulaiman Wadi and Naji, A.W. and Arof, Hamzah and Al-Khateeb, W. and Khan, S. and Ahmad, Harith (2012) Wideband and flat-gain amplifier based on high concentration erbium-doped fibres in parallel double-pass configuration. Quantum Electronics, 42 (3). pp. 241-243. ISSN 1063-7818

Hamida, B.A. and Cheng, X.S. and Harun, Sulaiman Wadi and Naji, A.W. and Arof, Hamzah and Khan, S. and Alkhateeb, W. and Ahmad, Harith (2012) Wideband and compact erbium-doped fiber amplifier using parallel double-pass configuration. Quantum Electronics, 54 (3). pp. 629-631. ISSN 1063-7818

Hamsin, M.R. and Azuddin, M. and Ahmad-Yazid, A. (2009) Design and analysis of multi-cavity traditional and H-branching runners for plastic injection mold. IEM Journal, 71 (2). pp. 22-35. ISSN 0126-513X

Han, J. and Annuar, M.S.M. and Ariffin, M.F.K. and Gumel, A.M. and Ibrahim, S. and Heidelberg, T. and Bakar, B. and Hossain, A.B.M.S. and Sharifuddin, Y. (2011) Lipase-catalyzed synthesis of 6-o-d-glucosyldecanoate in tert-butanol: reaction optimization and effect of mixing power input. Biotechnology & Biotechnological Equipment, 25 (4). pp. 2642-2651. ISSN 1310-2818

Haque, A. and Lim, B.H. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2012) Die attach properties of Zn-Al-Mg-Ga based high-temperature lead-free solder on Cu lead-frame. Journal of Materials Science: Materials in Electronics, 23 (1). pp. 115-123. ISSN 0957-4522

Harahap, S.M and Nik Sulaiman, N.M. and Mahmood, N.Z. (2009) Life cycle assessment and eco-efficiency: case in latex concentrate processing. In: CHEMECA Conference 2009, 27-30 Sept 2009, Perth, Australia.

Harun, S.Y.A.H and Sulaiman, N.M. and Aroua, M.K. (2005) Treatment of skim latex serum using gas sparged ultrafiltration. Developments in Chemical Engineering and Mineral Processing, 13 (5-6). pp. 667-674. ISSN 09691855

Harun, Sulaiman Wadi and Abdul-Rashid, H.A. and Muhd-Yassin, S.Z. and Abd-Rahman, M.K. and Jayapalan, Kanesh Kumar and Ahmad, Harith (2008) 37.2 dB small-signal gain from Er/Yb Co-doped fiber amplifier with 20 mW pump power. Optics & Laser Technology, 40 (1). pp. 88-91. ISSN 0030-3992

Harun, Sulaiman Wadi and Samsuri, Norhakimah Md and Ahmad, Harith (2004) Gain clamping in double-pass L-band EDFA using a ring resonator. Microwave and Optical Technology Letters, 43 (6). pp. 484-486. ISSN 0895-2477

Harun, Sulaiman Wadi and Samsuri, Norhakimah Md and Ahmad, Harith (2005) Gain enhancement in partial double-pass L-band EDFA system using a band-pass filter. Laser Physics Letters, 2 (1). pp. 36-38. ISSN 1612-2011

Harun, Sulaiman Wadi and Shamsudin, H. and Ahmad, Harith and Halder, A. and Paul, M.C. and Pal, M. and Bhadra, S.K. (2016) Development of CW and pulsed thulium ytterbium co-doped fiber lasers using nano-engineered yttria-alimina-silica based gain medium in conjunction with cladding pumping technique. Current Nanoscience, 12 (3). pp. 299-308. ISSN 1573-4137

Hasan, D.B. and Abdul Raman, A.A. and Daud, W.M.A.W. (2011) Application of response surface methodology in process parameters optimization for phenol mineralization using Fenton's peroxidation. African Journal of Biotechnology, 10 (50). pp. 10218-10231. ISSN 16845315 (ISSN)

Hasan, D.B. and Abdul Raman, A.A. and Daud, W.M.A.W. (2012) Oxidative mineralisation of petroleum refinery effluent using Fenton-like process. Chemical Engineering Research & Design, 90 (2). pp. 298-307. ISSN 0263-8762

Hasan, D.B. and Abdul Raman, A.A. and Daud, W.M.A.W. (2012) Using D-optimal experimental design to optimise remazol black B mineralisation by Fenton-like peroxidation. Environmental Technology, 33 (10-12). pp. 1111-1121. ISSN 0959-3330

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2011) Intermixing of metal oxide/Ag/metal oxide nanoscale multilayers prepared by rf reactive magnetron sputtering. Surface Engineering, 27 (5). pp. 382-388. ISSN 0267-0844

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, R. and Hamdi, M. (2010) Influence of substrate temperatures on structural, morphological and optical properties of rf-sputtered anatase TiO2 films. Arabian Journal for Science and Engineering, 35 (1C). pp. 147-156. ISSN 1319-8025

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, Rahman (2010) Adhesion and wear behavior of nanostructured titanium oxide thin films. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 5-10. ISSN 1823-0334

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, Rahman and Hamdi, M. (2010) Influence of substrate temperatures on structural, morphological and optical properties of RF-sputtered anatase Tio 2 films. Arabian Journal for Science and Engineering, 35 (1 C). pp. 147-156. ISSN 1319-8025

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, R. and Masjuki, Haji Hassan (2008) Effects of annealing treatment on optical properties of anatase TiO2 thin films. International Journal of Chemical and Biological Engineering, 1. pp. 1-5. ISSN 2010-3867

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, R. and Masjuki, Haji Hassan and Hamdi, M. (2010) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO2 thin films. Optical Materials, 32 (6). pp. 690-695. ISSN 0925-3467

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, R. and Masjuki, Haji Hassan and Hamdi, M. (2009) Synthesis and annealing of nanostructured TiO 2 films by radio-frequency magnetron sputtering. Journal of Applied Sciences, 9 (15). pp. 2815-2821. ISSN 1812-5654

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, R. and Masjuki, Haji Hassan and Hamdi, M. (2009) Synthesis and annealing of nanostructured TiO2 films by radio-frequency magnetron sputtering. Journal of Applied Sciences, 9 (15). pp. 2815-2821. ISSN 1812-5654

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan (2009) Effects of annealing treatment on optical properties of anatase TiO 2 thin films. World Academy of Science, Engineering and Technology, 40. pp. 221-225. ISSN 2010-376X

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Hamdi, M. (2010) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO 2 thin films. Optical Materials, 32 (6). pp. 690-695. ISSN 0925-3467

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Hamdi, M. (2010) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO< sub> 2</sub> thin films. Optical Materials, 32 (6). pp. 690-695. ISSN 0925-3467

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Johan, M.R. (2009) Structural, optical and morphological properties of TiO 2/Ag/ TiO 2 multilayer films. In: International Conference on Nanoscience and Nanotechnology, Nano-SciTech 2008, 2009, Selangor.

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Johan, M.R. (2009) Structural, optical and morphological properties of TiO∕ Ag∕ TiO multilayer films. In: AIP Conference Proceedings, 2009, Shah Alam, Selangor (Malaysia).

Hasanuzzaman, M. and Rahim, N.A. and Hosenuzzaman, M. and Saidur, R. and Mahbubul, I.M. and Rashid, M.M. (2012) Energy savings in the combustion based process heating in industrial sector. Renewable and Sustainable Energy Reviews, 16 (7). pp. 4527-4536. ISSN 1364-0321

Hasanuzzaman, M. and Rahim, N.A. and Saidur, R. (2010) Analysis of energy savings for rewinding and replacement of industrial motor. In: 2010 IEEE International Conference on Power and Energy, PECon2010, 2010, Kuala Lumpur.

Hasanuzzaman, M. and Rahim, N.A. and Saidur, R. (2011) Analysis of energy, exergy and energy savings of a fire tube boiler. In: 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011, 2011, Kuala Lumpur.

Hasanuzzaman, M. and Rahim, N.A. and Saidur, R. and Kazi, S.N. (2011) Energy savings and emissions reductions for rewinding and replacement of industrial motor. Energy, 36 (1). pp. 233-240. ISSN 0360-5442

Hasanuzzaman, M. and Saidur, R. and Rahim, N.A. (2011) Effectiveness enchancement of heat exchanger by using nanofluids. In: 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011, 2011, Kuala Lumpur.

Hasanuzzaman, M. and Saidur, R. and Rahim, N.A. (2011) Energy, exergy and economic analysis of an annealing furnace. International Journal of Physical Sciences, 6 (7). pp. 1257-1266. ISSN 1992-1950

Hasanuzzaman, M. and Saidur, Rahman and Ali, M. and Masjuki, Haji Hassan (2007) Effects of variables on natural convective heat transfer through V-corrugated vertical plates. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 109-117. ISSN 18230334

Hasanuzzaman, M. and Saidur, Rahman and Masjuki, Haji Hassan (2011) Effects of different variables on moisture transfer of household refrigerator-freezer. Energy Education Science and Technology Part A: Energy Science and Research, 27 (2). pp. 401-418. ISSN 1308-772X

Hasanuzzaman, M. and Saidur, Rahman and Masjuki, Haji Hassan (2008) Investigation of energy consumption and energy savings of refrigerator-freezer during open and closed door condition. Journal of Applied Sciences, 8 (10). pp. 1822-1831. ISSN 1812-5654

Hasanuzzaman, M. and Saidur, Rahman and Masjuki, Haji Hassan (2008) Moisture transfer and energy losses of household refrigeratorfreezer during the closed door operation. International Journal of Mechanical and Materials Engineering, 3 (1). 30-37..

Hasanuzzaman, Md and Saidur, Rahman and Masjuki, Haji Hassan (2009) Effects of operating variables on heat transfer and energy consumption of a household refrigerator-freezer during closed door operation. Energy, 34 (2). pp. 196-198. ISSN 1823-0334

Hasanuzzaman, Md and Saidur, Rahman and Masjuki, Haji Hassan (2009) Effects of operating variables on heat transfer and energy consumption of a household refrigerator-freezer during closed door operation. Energy, 34 (2). pp. 196-198. ISSN 0360-5442

Haseeb, A.S. Md. Abdul (2011) Implementation of micro-level problem based learning in a course on electronic materials. Journal of Materials Education, 33 (5-6). pp. 273-282. ISSN 0738-7989

Haseeb, A.S. Md. Abdul (2006) Modeling of the effects of athermal flow strength and activation energy for dislocation glide an the nanoindentation creep of nickel thin film at room temperature. Computational Materials Science, 37 (3). pp. 278-283. ISSN 0927-0256

Haseeb, A.S. Md. Abdul and Albers, U. and Bade, Klaus (2008) Friction and wear characteristics of electrodeposited nanocrystalline nickel-tungsten alloy films. Wear, 264 (1-2). pp. 106-112. ISSN 0043-1648

Haseeb, A.S. Md. Abdul and Arafat, M.M. and Johan, M.R. (2012) Stability of molybdenum nanoparticles in Sn-3.8Ag-0.7Cu solder during multiple reflow and their influence on interfacial intermetallic compounds. Materials Characterization, 64. pp. 27-35. ISSN 1044-5803

Haseeb, A.S. Md. Abdul and Arita, M. and Hayashi, Y. (2001) Thermal decomposition study of electrodeposited Fe-C and Fe-Ni-C alloys by differential scanning calorimetry. Journal of Materials Science, 36 (19). pp. 4739-4743. ISSN 0022-2461

Haseeb, A.S. Md. Abdul and Bade, Klaus (2008) LIGA fabrication of nanocrystalline Ni–W alloy micro specimens from ammonia-citrate bath. Microsystem Technologies, 14 (3). pp. 379-388. ISSN 0946-7076

Haseeb, A.S. Md. Abdul and Celis, Jean Pierre and Roos, Jozef R. (2003) Fretting wear of metallic multilayer films. Thin Solid Films, 444 (1-2). pp. 199-207. ISSN 0040-6090

Haseeb, A.S. Md. Abdul and Chew, C.S. and Johan, M.R. (2011) Interfacial reactions between Sn-3.5 Ag solder and Ni-W alloy films. Journal of Materials Science: Materials in Electronics, 22 (9). pp. 1372-1377. ISSN 0957-4522

Haseeb, A.S. Md. Abdul and Hasan, M.M. and Masjuki, Haji Hassan (2010) Structural and mechanical properties of nanostructured TiO2 thin films deposited by RF sputtering. Surface and Coatings Technology, 205 (2). pp. 338-344. ISSN 0257-8972

Haseeb, A.S. Md. Abdul and Hayashi, Y. and Masuda, M. and Arita, M. (2002) On the nature of the electrochemically synthesized hard Fe-0.96 mass pct C alloy film. Metallurgical and Materials Transactions B, 33 (6). pp. 921-927. ISSN 1073-5615

Haseeb, A.S. Md. Abdul and Hayashi, Y. and Masuda, M. and Arita, M. (2003) Study on the nature of the electrochemically synthesized hard Fe-15.4 mass Ni-0.70 mass C alloy film. Journal of Materials Research, 18 (4). pp. 840-847. ISSN 0884-2914

Haseeb, A.S. Md. Abdul and Jun, T.S. and Fazal, M.A. and Masjuki, Haji Hassan (2011) Degradation of physical properties of different elastomers upon exposure to palm biodiesel. Energy, 36 (3). pp. 1814-1819.

Haseeb, A.S. Md. Abdul and Leng, T.S. (2011) Effects of Co nanoparticle addition to Sn-3.8Ag-0.7Cu solder on interfacial structure after reflow and ageing. Intermetallics, 19 (5). pp. 707-712. ISSN 0966-9795

Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Ann, L.J. and Fazal, M.A. (2010) Corrosion characteristics of copper and leaded bronze in palm biodiesel. Fuel Processing Technology, 91 (3). pp. 329-334. ISSN 0378-3820

Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Siang, C.T. and Fazal, M.A. (2010) Compatibility of elastomers in palm biodiesel. Renewable Energy, 35 (10). pp. 2356-2361. ISSN 0960-1481

Haseeb, A.S. Md. Abdul and Schilardi, P.L. and Bolzan, A.E. and Piatti, R.C.V. and Salvarezza, R.C. and Arvia, A.J. (2001) Anodisation of copper in thiourea-containing acid solution - part II. in situ transversal imaging observations. kinetics of anodic film growth. Journal of Electroanalytical Chemistry, 500 (1-2). pp. 543-553. ISSN 0022-0728

Haseeb, A.S. Md. Abdul and Sia, S.Y. and Fazal, M.A. and Masjuki, Haji Hassan (2010) Effect of temperature on tribological properties of palm biodiesel. Energy, 35 (3). pp. 1460-1464. ISSN 0360-5442

Hashamdar, H. and Ibrahim, Z. and Jameel, M. and Karbakhsh, R.A. and Ismail, Z. and Kobraei, M. (2011) Use of the simplex method to optimize analytical condition in structural analysis. International Journal of Physical Sciences, 6 (4). pp. 691-697. ISSN 1992 - 1950

Hashamdar, H. and Ibrahim, Z. and Jameel, M. and Mahmud, H.B. (2011) Renovation explicit dynamic procedures by application of Trujillo algorithm. International Journal of Physical Sciences, 6 (2). pp. 255-266. ISSN 1992-1950

Hashemi, Sajedeh Sadat Ghazizadeh and Mahmud, Hilmi and Tan, Chee Ghuan and Ang, Bee Chin and Kuenzel, Carsten and Ranjbar, Navid (2019) Safe disposal of coal bottom ash by solidification and stabilization techniques. Construction and Building Materials, 197. pp. 705-715. ISSN 0950-0618

Hashim, H. and Ibrahim, Z. and Razak, H.A. (2013) Dynamic characteristics and model updating of damaged slab from ambient vibration measurements. Measurement: Journal of the International Measurement Confederation, 46 (4). pp. 1371-1378. ISSN 02632241

Hashim, M.A. and Mjalli, F.S. and Hayyan, M. and Al-Nashef, I.M. (2009) Application of low cost ionic liquids for the separation of glycerine from palm oil-based biodiesel. In: CHEMECA Conference 2009, 27-30 Sept 2009, Perth, Australia.

Hashim, M.A. and Sastry, C.A. and Ibrahim, Shaliza and Vikineswary, S. and Yap, S.Y. (1994) Report on the International Symposium on Bioproducts Processing. Asia Pacific Journal of Molecular Biology and Biotechnology, 2 (2). pp. 157-159. ISSN 0128-7451

Hashim, Roslan and Fitri, A. and Motamedi, S. (2012) Modelling of coastal hydrodynamics associated with coastal structures. In: 2nd Conference for Regional Cooperation in Ocean and Earth Science Research in the South China Sea, 21-24 October 2012, University of Malaya, Kuala Lumpur, Malaysia.

Hashim, Roslan and Islam, M.S. (2008) Properties of stabilized peat by soil-cement column method. Electronic Journal of Geotechnical Engineering, 13 J. pp. 1-9. ISSN 10893032

Hashim, Roslan and Islam, M.S. (2008) A model study to determine engineering properties of peat soil and effect on strength after stabilisation. European Journal of Scientific Research, 22 (2). pp. 205-215. ISSN 1450216X

Hashim, Roslan and Islam, S. (2008) Engineering properties of peat soils in peninsular, Malaysia. Journal of Applied Sciences, 8 (22). pp. 4215-4219. ISSN 18125662

Hashim, Roslan and Kamali, B. and Tamin, N.M. and Zakaria, R. (2010) An integrated approach to coastal rehabilitation: Mangrove restoration in Sungai Haji Dorani, Malaysia. Estuarine Coastal and Shelf Science, 86 (1). pp. 118-124. ISSN 0272-7714

Hashim, Roslan and Mohd Din, M.A. (2009) Implementing outcome based education using project based learning at University of Malaya. European Journal of Scientific Research, 26 (1). pp. 80-86. ISSN 1450216X

Hashimoto, S. and Ohmura, N. and Kim, S.J. and Ibrahim, S. (2012) Advances in mixing technology: recent advances in mixing research and development. International Journal of Chemical Engineering, 2012. pp. 1-2. ISSN 1687-8078

Hasikin, K. and Ibrahim, F. and Soin, N. (2008) Determination of design parameters of a biosensor for human artery pulse wave detection. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Hasikin, K. and Ibrahim, F. and Soin, N. (2008) Modeling of a micro-diaphragm biosensor for human artery pulse wave detection. In: 2008 IEEE International Conference on Semiconductor Electronics, ICSE 2008, 2008, Johor Bahru, Johor.

Hasikin, K. and Soin, N. and Ibrahim, F. (2010) Micro-diaphragm performance analysis for polyimide diaphragm. In: 2010 IEEE International Conference on Semiconductor Electronics, ICSE 2010, 2010, Melaka .

Hasikin, K. and Soin, N. and Ibrahim, F. (2009) Modeling an optical diaphragm for human pulse pressure detection. In: Advances in Microelectronics, Nanoelectronics and Optoelectronics, 30 May-1 June 2009, Istanbul, Turkey. (Submitted)

Hasikin, K. and Soin, N. and Ibrahim, F. (2009) Modeling of a polyimide diaphragm for an optical pulse pressure sensor. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.

Hasikin, K. and Soin, N. and Ibrahim, F. (2008) Modeling of an optical diaphragm for human pulse pressure detection. WSEAS Transactions on Electronics, 5 (11). pp. 447-456. ISSN 11099445 (ISSN)

Hassan, A. and Abdul rahman, N.M.M. and Yahya, R. (2010) Plasticisation effect on thermal and tensile properties of injection moulded short glass Fibreipol yamide 6,6 composites. In: Prosiding Seminar Kebangsaan Aplikasi Sains dan Matematik 2010, 08-10 Dec 2010, Johor Bahru. (Submitted)

Hassan, A. and Ibrahim, F. (2011) Development of a kidney teleultrasound consultation system. Journal of Digital Imaging, 24 (2). pp. 308-313. ISSN 08971889

Hassan, C.R.C. and Balasubramaniam, P.A.L. and Abdul Raman, A.A. and Mahmood, N.Z. and Hung, F.C. and Sulaiman, N.M.N. (2009) Inclusion of human errors assessment in failure frequency analysis-a case study for the transportation of ammonia by rail in Malaysia. Process Safety Progress, 28 (1). pp. 60-67. ISSN 10668527 15475913

Hassan, F. and Majid, S.R. and Arof, Abdul Kariem (2009) Synthesis and characterization of Al2TiO5 by Sol-Gel method. In: National Workshop on Functional Materials 2009, 16 June 2009, Centre for Ionics,University of Malaya.

Hassan, L.H. and Moghavvemi, M. and Almurib, H.A.F. (2012) Modeling UPFC into multi-machine power systems. Arabian Journal for Science and Engineering, 37 (6). pp. 1613-1624. ISSN 13198025

Hassan, L.H. and Moghavvemi, M. and Almurib, H.A.F. and Muttaqi, K.M. (2013) A coordinated design of PSSs and UPFC-based stabilizer using Genetic Algorithm. In: 2013 IEEE Industry Applications Society Annual Meeting, IAS 2013, 6-11 October 2013, Lake Buena Vista, FL, United States.

Hassan, L.H. and Moghavvemi, M. and Almurib, H.A.F. and Muttaqi, K.M. and Du, H. (2012) Damping of low-frequency oscillations and improving power system stability via auto-tuned PI stabilizer using Takagi-Sugeno fuzzy logic. International Journal of Electrical Power & Energy Systems, 38 (1). pp. 72-83. ISSN 0142-0615

Hassan, L.H. and Moghavvemi, M. and Almurib, H.A.F. and Muttaqi, K.M. and Ganapathy, V.G. (2014) Optimization of power system stabilizers using participation factor and genetic algorithm. International Journal of Electrical Power & Energy Systems, 55. pp. 668-679. ISSN 0142-0615

Hassan, L.H. and Moghavvemi, M. and Almurib, H.A.F. and Steinmayer, O. (2013) Application of genetic algorithm in optimization of unified power flow controller parameters and its location in the power system network. International Journal of Electrical Power & Energy Systems, 46 (1). pp. 89-97. ISSN 0142-0615

Hassan, L.H. and Moghavvemi, M. and Almurib, H.A.F. and Steinmayer, O. (2013) Current state of neural networks applications in power system monitoring and control. International Journal of Electrical Power & Energy Systems, 51. pp. 134-144. ISSN 0142-0615

Hassan, L.H. and Moghavvemi, M. and Mohamed, H.A.F. (2009) Dynamic stability assessment of the Iraqi power system network. In: International Conference for Technical Postgraduates, TECHPOS 2009, 14-15 December 2009, Kuala Lumpur, Malaysia.

Hassan, L.H. and Moghavvemi, M. and Mohamed, H.A.F. (2011) Impact of UPFC-based damping controller on dynamic stability of Iraqi power network. Scientific Research and Essays, 6 (1). pp. 136-145. ISSN 19922248

Hassan, L.H. and Moghavvemi, M. and Mohamed, H.A.F. (2010) Power system oscillations damping using unified power flow controller-based stabilizer. American Journal of Applied Sciences, 7 (10). pp. 1393-1395. ISSN 15469239

Hassan, L.H. and Moghavvemi, M. and Mohamed, H.A.F. (2009) Power system stabilization based on artificial intelligent techniques: a review. In: International Conference for Technical Postgraduates, TECHPOS 2009, 14-15 December 2009, Kuala Lumpur, Malaysia.

Hassan, L.H. and Moghavvemi, M. and Mohamed, H.A.F. (2010) Takagi-sugeno fuzzy gains scheduled PI controller for enhancement of power system stability. American Journal of Applied Sciences, 7 (1). pp. 145-152. ISSN 1546-9239

Hassan, L.H. and Mohamed, H.A.F. and Moghavvemi, M. and Yang, S.S. (2009) Load frequency control of power systems with Sugeno fuzzy gain scheduling PID controller. In: ICROS-SICE International Joint Conference 2009, ICCAS-SICE 2009, 18-21 August 2009, Fukuoka, Japan.

Hassan, M.A. and Naderi, S. and Bushroa, A.R. (2014) Low-velocity impact damage of woven fabric composites: Finite element simulation and experimental verification. Materials & Design, 53. pp. 706-718. ISSN 0261-3069

Hassan, N.H.N. and Bakar, A.H.A. and Mokhlis, H. and Illias, H.A. (2012) Analysis of arrester energy for 132kV overhead transmission line due to back flashover and shielding failure. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Hassani, M. and Mekhilef, S. and Patrick Hu, A. and Watson, N.R. (2011) A novel MPPT algorithm for load protection based on output sensing control. In: 2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011, Singapore.

Hayyan, A. and Hashim, M.A. and Hayyan, M. (2015) Application of a novel catalyst in the esterification of mixed industrial palm oil for biodiesel production. Bioenergy Research, 8 (1). pp. 459-463. ISSN 1939-1234

Hayyan, M. and Aissaoui, T. and Hashim, M.A. and AlSaadi, M.A. and Hayyan, A. (2015) Triethylene glycol based deep eutectic solvents and their physical properties. Journal of the Taiwan Institute of Chemical Engineers, 50. pp. 24-30. ISSN 1876-1070

Hayyan, M. and Hashim, M.A. and AlNashef, I.M. (2015) Kinetics of superoxide ion in dimethyl sulfoxide containing ionic liquids. Ionics, 21 (3). pp. 719-728. ISSN 0947-7047

Hebbar, N. and Praveen, B.M. and Prasanna, B.M. and Venkatesha, V.T. and Abd Hamid, S.B. (2015) Adsorption, thermodynamic, and electrochemical studies of ketosulfide for mild steel in acidic medium. Journal of Adhesion Science and Technology, 29 (24). pp. 2692-2708. ISSN 0169-4243

Hindia, M.N. and Reza, A.W. and Noordin, K.A. (2015) A novel scheduling algorithm based on game theory and multicriteria decision making in LTE network. International Journal of Distributed Sensor Networks. p. 8. ISSN 1550-1329

Hisbullah, . and Hussain, M.A. and Ramachandran, K.B. (2002) Comparative evaluation of various control schemes for fed-batch fermentation. Bioprocess and Biosystems Engineering, 24 (5). pp. 309-318. ISSN 1615-7591

Hisbullah, . and Hussain, M.A. and Ramachandran, K.B. (2003) Design of a fuzzy logic controller for regulating substrate feed to fed-batch fermentation. Food and Bioproducts Processing, 81 (C2). pp. 138-146. ISSN 0960-3085

Hisham, H. and Amouzad Mahdiraji, G. and Abas, A. and Mahdi, M.A. and Adikan, Faisal Rafiq Mahamd (2012) Characterization of transient response in a fiber grating fabry-perot lasers. Photonics Journal, IEEE, 4 (6). 2353 - 2371 . ISSN 1943-0655

Hisham, H.K. and Abas, A.F. and Mahdiraji, G.A. and Mahdi, M.A. and Noor, A.S.M. (2012) Characterization of phase noise in a single-mode fiber grating Fabry Perot laser. Journal of Modern Optics, 59 (4). pp. 393-401. ISSN 0950-0340

Hisham, H.K. and Abas, A.F. and Mahdiraji, G.A. and Mahdi, M.A. and Noor, A.S.M. (2012) Characterization of small-signal intensity modulation of single-mode fiber grating fabry-perot laser source. Optical Review, 19 (2). pp. 64-70. ISSN 1340-6000

Hisham, H.K. and Abas, A.F. and Mahdiraji, G.A. and Mahdi, M.A. and Noor, A.S.M. (2012) Improving the characteristics of the modulation response for fiber Bragg grating Fabry-Perot lasers by optimizing model parameters. Optics and Laser Technology, 44 (6). pp. 1698-1705. ISSN 0030-3992

Hisham, H.K. and Abas, A.F. and Mahdiraji, G.A. and Mahdi, M.A. and Noor, A.S.M. (2012) Relative intensity noise reduction by optimizing fiber grating fabry-perot laser parameters. IEEE Journal of Quantum Electronics, 48 (3). pp. 375-383. ISSN 0018-9197

Hmood, Jassim K. and Harun, Sulaiman Wadi (2018) Broadband optical frequency comb generator based on driving N-cascaded modulators by Gaussian-shaped waveform. Optical Fiber Technology, 42. pp. 75-83. ISSN 1068-5200

Ho, Y.K. and Mjalli, F.S. and Yeoh, H.K. (2010) Multivariable adaptive predictive model based control of a biodiesel transesterification reactor. Journal of Applied Sciences, 10 (12). pp. 1019-1027. ISSN 1812-5654

Ho, Y.K. and Shamiri, A. and Mjalli, F.S. and Hussain, M.A. (2012) Control of industrial gas phase propylene polymerization in fluidized bed reactors. Journal of Process Control, 22 (6). pp. 947-958. ISSN 0959-1524

Hoo, Wai Lam and Chan, Chee Seng (2015) Recognizing unknown objects with attributes relationship model. Expert Systems with Applications, 42 (23). pp. 9279-9283. ISSN 0957-4174

Hosen, M.A. and Hussain, M.A. (2012) Optimization and control of polystyrene batch reactor using hybrid based model. Computer Aided Chemical Engineering, 31. pp. 760-764. ISSN 15707946

Hosen, M.A. and Hussain, M.A. and Mjalli, F.S. (2011) Control of polystyrene batch reactors using neural network based model predictive control (NNMPC): an experimental investigation. Control Engineering Practice, 19 (5). pp. 454-467. ISSN 0967-0661

Hosen, M.A. and Hussain, M.A. and Mjalli, F.S. (2011) Hybrid modelling and kinetic estimation for polystyrene batch reactor using Artificial Neutral Network (ANN) approach. Asia-Pacific Journal of Chemical Engineering, 6 (2). pp. 274-287. ISSN 1932-2135

Hosen, M.A. and Jumaat, M.Z. and Islam, A.B.M.S. (2015) Inclusion of CFRP - epoxy composite for end anchorage in NSM-epoxy strengthened beams. Advances in Materials Science and Engineering. p. 10. ISSN 1687-8434

Hosen, M.A. and Jumaat, M.Z. and Islam, A.B.M.S. and Kamruzzaman, M. and Huda, M.N. and Soeb, M.R. (2015) Eliminating concrete cover separation of NSM strengthened beams by CFRP end anchorage. Structural Engineering and Mechanics, 56 (6). pp. 899-916. ISSN 1225-4568

Hossain, M.S. and Ong, Z.C. and Ismail, Z. and Khoo, S.Y. (2017) A comparative study of vibrational response based impact force localization and quantification using radial basis function network and multilayer perceptron. Expert Systems with Applications, 85. pp. 87-98. ISSN 0957-4174

Hossain, M.S. and Rahim, N.A. and Solangi, K.H. and Saidur, R. and Fayaz, H. and Madlool, N.A. (2011) Global solar energy use and social viability in Malaysia. In: 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011, 2011, Kuala Lumpur.

Hossain, M.S. and Saidur, R. and Fayaz, H. and Rahim, N.A. and Islam, M.R. and Ahamed, J.U. and Rahman, M.M. (2011) Review on solar water heater collector and thermal energy performance of circulating pipe. Renewable and Sustainable Energy Reviews, 15 (8). pp. 3801-3812. ISSN 1364-0321

Hossain, S. and Masjuki, Haji Hassan and Varman, Mahendra and Kalam, M.A. and Rahman, S.M.A. (2015) Comparative evaluation of the blends of gas-to-liquid (GTL) fuels and biodiesels with diesel at high idling conditions: an in-depth analysis on engine performance and environment pollutants. RSC Advances, 5 (17). pp. 13068-13077. ISSN 2046-2069

Hosseini, S. and Azari, P. and Aeinehvand, M.M. and Rothan, H.A. and Djordjevic, I. and Martinez-Chapa, S.O. and Madou, M.J. (2016) Intrant ELISA: A Novel Approach to Fabrication of Electrospun Fiber Mat-Assisted Biosensor Platforms and Their Integration within Standard Analytical Well Plates. Applied Sciences, 6 (11). p. 336. ISSN 2076-3417

Hosseini, S. and Azari, P. and Farahmand, E. and Gan, S.N. and Rothan, H.A. and Yusof, R. and Koole, L.H. and Djordjevic, I. and Ibrahim, F. (2015) Polymethacrylate coated electrospun PHB fibers: An exquisite outlook for fabrication of paper-based biosensors. Biosensors and Bioelectronics, 69. pp. 257-264. ISSN 0956-5663

Hosseini, S. and Azari, P. and Jiménez-Moreno, M.F. and Rodriguez-Garcia, A. and Pingguan-Murphy, B. and Madou, M.J. and Martinez-Chapa, S.O. (2017) Polymethacrylate Coated Electrospun PHB Fibers as a Functionalized Platform for Bio-Diagnostics: Confirmation Analysis on the Presence of Immobilized IgG Antibodies against Dengue Virus. Sensors, 17 (10). p. 2292. ISSN 1424-8220

Hosseini, S. and Ibrahim, F. and Rothan, H.A. and Yusof, R. and van der Marel, C. and Djordjevic, I. and Koole, L.H. (2015) Aging effect and antibody immobilization on -COOH exposed surfaces designed for dengue virus detection. Biochemical Engineering Journal, 99. pp. 183-192. ISSN 1369-703X

Hosseini, S. and Mahmud, N.H.M.E. and Yahya, R.B. and Ibrahim, F. and Djordjevic, I. (2015) Polypyrrole conducting polymer and its application in removal of copper ions from aqueous solution. Materials Letters, 149. pp. 77-80. ISSN 0167-577X

Huang, G.Y. and Shiah, Y.C. and Bai, C.J. and Chong, W.T. (2015) Experimental study of the protuberance effect on the blade performance of a small horizontal axis wind turbine. Journal of Wind Engineering and Industrial Aerodynamics, 147. pp. 202-211. ISSN 0167-6105

Huda, M.N. and Jumaat, M.Z. and Islam, A.B.M.S. (2016) Flexural performance of reinforced oil palm shell & palm oil clinker concrete (PSCC) beam. Construction and Building Materials, 127. pp. 18-25. ISSN 0950-0618

Huda, M.N. and Jumaat, M.Z. and Islam, A.B.M.S. and Soeb, M.R. (2016) Influence of palm oil factory wastes as coarse aggregate species for green lightweight concrete. Revista de la Construccion, 15 (3). pp. 133-139. ISSN 0717-7925

Husain, N.M. and Mahmud, H.B. and Karim, M.R. and Hamid, N.B.A.A. (2010) Effects of aggregate gradations on properties of grouted Macadam composite pavement. In: 2nd International Conference on Chemical, Biological and Environmental Engineering, ICBEE 2010, 2010, Cairo.

Husairi, F.S. and Rouhi, J. and Eswar, K.A. and Ooi, C.H.R. and Rusop, M. and Abdullah, S. (2015) Ethanol solution sensor based on ZnO/PSi nanostructures synthesized by catalytic immersion method at different molar ratio concentrations: an electrochemical impedance analysis. Sensors and Actuators A: Physical, 236. pp. 11-18. ISSN 0924-4247

Husnawan, H. and Masjuki, Haji Hassan and Mahlia, T.M.I. and Saifullah, M.G. and Kalam, M.A. (2009) The use of dihydroxy fatty acid and palm-based polyol as selected components of envo-diesel fuel blends to reduce c.i. engine gaseous emissions and carbon deposits. In: SAE 2009 International Powertrains, Fuels & Lubricants Meeting, 15-17 June 2009, Florence, Italy.

Husnawan, M. and Masjuki, Haji Hassan and Mahlia, T.M.I. and Mekhilef, Saad and Saifullah, M.G. (2009) Use of post flame metal-based and oxygenated additive combination for biodiesel-diesel blends. Journal of Scientific and Industrial Research, 68 (12). pp. 1049-1052. ISSN 0022-4456

Husnawan, M. and Masjuki, Haji Hassan and Mahlia, T.M.I. and Saidur, R. and Kalam, M.A. (2009) Performance and emissions characterization of diesel engine running with re-formulated palm oil methyl ester-diesel blended fuel. In: Proceedings of the Fourth International Conference on Thermal Engineering: Theory and Applications, 12-14 Jan 2009, Abu Dhabi, UAE. (Submitted)

Hussain, M.A. (1999) Review of the applications of neural networks in chemical process control - simulation and online implementation. Artificial Intelligence in Engineering, 13 (1). pp. 55-68. ISSN 0954-1810

Hussain, M.A. (2001) Vacuum degasifier: comprehensive modelling and simulation. Vacuum, 60 (3). pp. 325-337. ISSN 0042-207X

Hussain, M.A. and Allwright, J.C. and Kershenbaum, L.S. (1995) Nonlinear control with linearized models and neural networks. In: Proceedings of the 4th International Conference on Artificial Neural Networks, 1995, Cambridge, UK.

Hussain, M.A. and Aroua, M.K. (2007) Special issue on process systems engineering. Asia-Pacific Journal of Chemical Engineering, 2 (6). pp. 499-500. ISSN 1932-2143

Hussain, M.A. and Aroua, M.K. and Lim, J.S. (2009) Control of a hydrolyzer using neural-network based controller. In: CHEMECA Conference 2009, 27-30 Sept 2009, Perth, Australia.

Hussain, M.A. and Aroua, M.K. and Yin, Chun-Yang and Rahman, R.A. and Ramli, N.A. (2010) Hybrid neural network for prediction of CO 2 solubility in monoethanolamine and diethanolamine solutions. Korean Journal of Chemical Engineering, 27 (6). pp. 1864-1867. ISSN 0256-1115

Hussain, M.A. and Ho, P.Y. (2004) Adaptive feedback linearizing control with neural-network-based hybrid models for MIMO nonlinear systems. Journal of the Chinese Institute of Chemical Engineers, 35 (3). pp. 353-362. ISSN 0368-1653

Hussain, M.A. and Ho, P.Y. (2004) Adaptive sliding mode control with neural network based hybrid models. Journal of Process Control, 14 (2). pp. 157-176. ISSN 0959-1524

Hussain, M.A. and Ho, P.Y. and Allwright, J.C. (2001) Adaptive linearizing control with neural-network-based hybrid models. Industrial & Engineering Chemistry Research, 40 (23). pp. 5604-5620. ISSN 0888-5885

Hussain, M.A. and Kershenbaum, L.S. (2000) Implementation of an inverse-model-based control strategy using neural networks on a partially simulated exothermic reactor. Chemical Engineering Research and Design, 78 (A2). pp. 299-311. ISSN 0263-8762

Hussain, M.A. and Kittisupakorn, P. and Kershenbaum, L. (2000) The use of a partially simulated exothermic reactor to test nonlinear algorithms. Korean Journal of Chemical Engineering, 17 (5). pp. 516-523. ISSN 0256-1115

Hussain, M.A. and Mahmoud, K.M. (2011) Determination of quercetin in some natural products using reversed FIA-CL method. Der Pharma Chemica, 3 (2). pp. 321-329. ISSN 0975413X

Hussain, M.A. and Manan, Z.A. and Aziz, N. (2012) Recent developments on pse education and research in Malaysia. Computer Aided Chemical Engineering, 31. pp. 70-74. ISSN 15707946

Hussain, M.A. and Rahman, M.S. (1999) Thermal conductivity prediction of fruits and vegetables using neural networks. International Journal of Food Properties, 2 (2). pp. 121-137. ISSN 10942912

Hussain, M.A. and Rahman, M.S. and Ng, C.W. (2002) Prediction of pores formation (porosity) in foods during drying: generic models by the use of hybrid neural network. Journal of Food Engineering, 51 (3). pp. 239-248. ISSN 0260-8774

Hussain, Mohamed Azlan and Kittisupakorn, Paisan and Daosu, Wachira (2001) Implementation of neural-network-based inverse-model control strategies on an exothermic reactor. Science Asia, 27. pp. 41-50.

Hussain, Mohd Azlan (1993) Computational techniques in chemical process simulators. Malaysian Journal of Computer Science, 6. pp. 73-88. ISSN 0127-9084

Hussain, Mohd Azlan (1990) Modelling and analysis of a vacuum deaerator. In: Eighteenth Australasian Chemical Engineering Conference Part 2 (of 2), 1990, Auckland, NZ.

Hussain, Mohd Azlan and Aroua, Mohamed Kheireddine and Yin, Chun-Yang and Rahman, Ramzalina Abd and Ramli, Noor Asriah (2010) Hybrid neural network for prediction of CO2 solubility in monoethanolamine and diethanolamine solutions. Korean Journal of Chemical Engineering, 27 (6). pp. 1864-1867. ISSN 0256-1115

Hussain, Mohd Azlan and Kershenbaum, L.S. (1999) Simulation and experimental implementation of a neural-network-based internal-model control strategy on a reactor system. Chemical Engineering Communications, 172. pp. 151-169. ISSN 0098-6445

Hussin, F. and Aroua, M.K. and Daud, W.M.A.W. (2011) Textural characteristics, surface chemistry and activation of bleaching earth: A review. Chemical Engineering Journal, 170 (1). pp. 90-106. ISSN 1385-8947

Hussin, I.H. and Usman, Juliana and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan (2007) Body performance standards of healthy Malaysians: adult range of fitness level. Journal of Biomechanics, 40 (2). p. 767. ISSN 0021-9290

I

Ibraheam, A.S. and Al-Douri, Y. and Al-Fhdawi, J.M.S. and Al-Jumaili, H.S. and Verma, K.D. and Hashim, U. and Ayub, R.M. and Rahim Ruslinda, A. and Md Arshad, M.K. and Reshak, A.H. and Hamid, Sharifah Bee Abd (2016) Structural, optical and electrical properties of Cu2Zn1−xCdxSnS4 quinternary alloys nanostructures deposited on porous silicon. Microsystem Technologies, 22 (12). pp. 2893-2900. ISSN 0946-7076

Ibrahim, F. and Ahmad, S.A. (2012) Assessment of upper body muscle activity during salat and stretching exercise: a pilot study. In: IEEE-EMBS International Conference on Biomedical and Health Informatics, BHI 2012. In Conj. with the 8th Int. Symp.on Medical Devices and Biosensors and the 7th Int. Symp. on Biomedical and Health Engineering, 2012, Hong Kong and Shenzhen.

Ibrahim, F. and Ahmad, S.A. (2012) Investigation of electromyographic activity during Salat and stretching exercise. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Ibrahim, F. and Ahmad, S.A. and Woo, P.J. and Wan, W.A.B.A. (2012) Biomechanical response of the upper body during prostration in salat and the child's pose: a preliminary study. Journal of Physical Therapy Science, 24 (10). pp. 1021-1024. ISSN 0915-5287

Ibrahim, F. and Ahmad, W.A.W. (2008) Study of heart rate changes in different salat's positions. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Ibrahim, F. and Arifin, N. and Rahim, Z.H.A. (2013) Effect of orofacial myofunctional exercise using an oral rehabilitation tool on labial closure strength, tongue elevation strength and skin elasticity. Journal of Physical Therapy Science, 25 (1). pp. 11-14. ISSN 0915-5287

Ibrahim, F. and Basheer Ali, J. and Jaais, F. and Nasir Taib, M. (2001) Expert system for early diagnosis of eye diseases infecting the Malaysian population. In: IEEE Region 10 International Conference on Electrical and Electronic Technology, 2001, Singapore.

Ibrahim, F. and Chae, J.H. and Arifin, N. and Zarmani, N.M. and Cho, J. (2007) EMG analysis of facial muscles exercise using oral cavity rehabilitative device. In: 2006 IEEE Region 10 Conference, TENCON 2006, 2007, Hong Kong.

Ibrahim, F. and Faisal, T. and Mohamad Salim, M.I. and Taib, M.N. (2010) Non-invasive diagnosis of risk in dengue patients using bioelectrical impedance analysis and artificial neural network. Medical and Biological Engineering and Computing, 48 (11). pp. 1141-1148. ISSN 0140-0118

Ibrahim, F. and Ismail, N.A. and Taib, M.N. and Wan Abas, W.A.B. (2004) Modeling of hemoglobin in dengue fever and dengue hemorrhagic fever using bioelectrical impedance. Physiological Measurement, 25 (3). pp. 607-615. ISSN 1361-6579

Ibrahim, F. and Ismail, N.A. and Taib, M.N. and Wan Abas, W.A.B. (2004) Modeling of hemoglobin in dengue fever and dengue hemorrhagic fever using bioelectrical impedance. Physiological Measurement, 25 (3). pp. 607-615. ISSN 0967-3334

Ibrahim, F. and Jahanshahi, P. and Abd Rahman, N. and Abdul Kahar, M.K.B. and Madou, M. and Nozari, A.A. and Soin, N. and Md Dawal, S.Z. and Abi Samra, K. (2010) Analysis and experiment of centrifugal force for microfluidic ELISA CD platform. In: 2010 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2010, 2010, Kuala Lumpur.

Ibrahim, F. and Taib, M.N. and Wan Abas, W.A.B. and Guan, C.C. and Sulaiman, S. (2005) A novel approach to classify risk in dengue hemorrhagic fever (DHF) using bioelectrical impedance analysis (BIA). IEEE Transactions on Instrumentation and Measurement, 54 (1). pp. 237-244. ISSN 0018-9456

Ibrahim, F. and Taib, M.N. and Wan Abas, W.A.B. and Guan, C.C. and Sulaiman, S. (2005) A novel dengue fever (DF) and dengue haemorrhagic fever (DHF) analysis using artificial neural network (ANN). Computer Methods and Programs in Biomedicine, 79 (3). pp. 273-281. ISSN 01692607

Ibrahim, F. and Thio, T.H.G. and Faisal, T. and Neuman, M. (2015) The application of biomedical engineering techniques to the diagnosis and management of tropical diseases: A review. Sensors, 15 (3). pp. 6947-6995. ISSN 1424-8220

Ibrahim, F. and Tiong, C.K. and Ismail, N.A. and Taib, M.N. (2005) Analysis of mass distribution in dengue patients using bioelectrical impedance. In: 2005 Asian Conference on Sensors and the International Conference on new Techniques in Pharmaceutical and Biomedical Research, 2005, Kuala Lumpur.

Ibrahim, F. and Wan Abas, W.A.B. and Taib, M.N. and Guan, C.C. and Sulaiman, S. (2007) A new approach to classify risk in dengue infection using bioelectrical impedance analysis. Dengue Bulletin, 31. pp. 58-74. ISSN 1020895X

Ibrahim, Fatimah and Ooi, K.F. and Ismail, N.A. and Taib, M.N. and Wan Abas, Wan Abu Bakar (2005) Analysis of water compartment in dengue patients. In: 2005 27th Annual International Conference of the Engineering in Medicine and Biology Society, IEEE-EMBS 2005, 2005, Shanghai.

Ibrahim, Fatimah and Ooi, K.F. and Ismail, N.A. and Taib, M.N. and Wan Abas, Wan Abu Bakar (2005) Analysis of water compartment in dengue patients. In: 2005 27th Annual International Conference of the Engineering in Medicine and Biology Society, IEEE-EMBS 2005, 2005, Shanghai.

Ibrahim, Fatimah and Uddin, S.M. and Sayad, A.A. and Pei, K.X. and Thiha, A. and Mohktar, M.S. and Hashim, U. and Cho, J. and Thong, Kwai Lin (2015) A portable automatic endpoint detection system for amplicons of loop mediated isothermal amplification on microfluidic compact disk platform. Sensors, 15 (3). pp. 5376-5389. ISSN 1424-8220

Ibrahim, Fatimah and Wan Abas, Wan Abu Bakar and Taib, M.N. (2004) Analysis of bioelectrical tissue conductivity in Malaysian adults. In: IEEE TENCON 2004 - 2004 IEEE Region 10 Conference: Analog and Digital Techniques in Electrical Engineering, 2004, Chiang Mai.

Ibrahim, I. and Ibrahim, Z. and Ahmad, Hamzah and Jusof, M.F.M. and Yusof, Z.M. and Nawawi, S.W. and Mubin, M. (2015) An assembly sequence planning approach with a rule-based multi-state gravitational search algorithm. International Journal of Advanced Manufacturing Technology, 79 (5-8). pp. 1363-1376. ISSN 0268-3768

Ibrahim, I. and Ibrahim, Z. and Khalil, K. and Mokji, M.M. and Abu Bakar, S.A.R.S. and Mokhtar, N. and Ahmad, W.K.W. (2012) An improved defect classification algorithm for six printing defects and its implementation on real printed circuit board images. International Journal of Innovative Computing Information and Control, 8 (5A). pp. 3239-3250. ISSN 1349-4198

Ibrahim, M.N.M. and Ibrahim, F. and Razack, A.H. (2008) Web based online diagnosis for erectile dysfunction using International Index of Erectile Function (IIEF). In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Ibrahim, M.R. and Karim, M.R. and Kidwai, F.A. (2008) The effect of digital count-down display on signalized junction performance. American Journal of Applied Sciences, 5 (5). pp. 479-482. ISSN 15469239

Ibrahim, M.R. and Katman, H.Y. and Karim, M.R. and Koting, S. and Mashaan, N.S. (2013) A review on the effect of crumb rubber addition to the rheology of crumb rubber modified bitumen. Advances in Materials Science and Engineering, 2013. pp. 1-8. ISSN 1687-8434

Ibrahim, N.I. and Adji, B.M. and Karim, M.R. (2011) Preliminary study on parking control system for proposed transit oriented development (TOD) area: implementation potential in Petaling Jaya City Council (MBPJ), Malaysia. In: Proceedings of the Eastern Asia Society for Transportation Studies, 20-23 Jun 2011, Jeju, Korea.

Ibrahim, R.K. and Hayyan, M. and AlSaadi, M.A. and Hayyan, A. and Ibrahim, S. (2016) Environmental application of nanotechnology: air, soil, and water. Environmental Science and Pollution Research, 23 (14). pp. 13754-13788. ISSN 0944-1344

Ibrahim, Rusul Khaleel and Hayyan, Maan and AlSaadi, Mohammed Abdulhakim and Ibrahim, Shaliza and Hayyan, Adeeb and Hashim, Mohd Ali (2019) Physical properties of ethylene glycol-based deep eutectic solvents. Journal of Molecular Liquids, 276. pp. 794-800. ISSN 0167-7322

Ibrahim, S. (2007) Mixing in the mechanically agitated bioreactor: ‘a matter of being stirred, not shaken’. Journal of the Institution of Engineers, Malaysia, 68 (3). pp. 43-47. ISSN 0126-513X

Ibrahim, S. and Charinpanitkul, T. and Kobatake, E. and Sriyudthsak, M. (2016) Nanowires Nickel Oxide and Nanospherical Manganese Oxide Synthesized via Low Temperature Hydrothermal Technique for Hydrogen Peroxide Sensor. Journal of Chemistry, 2016. pp. 1-6. ISSN 2090-9063

Ibrahim, S. and Jasnin, S.N. and Wong, S.D. and Baker, I.F. (2012) Zwietering's equation for the suspension of porous particles and the use of curved blade impellers. International Journal of Chemical Engineering, 2012. pp. 1-13. ISSN 1687-8078

Ibrahim, S. and Nienow, A.W. (1999) Comparing impeller performance for solid-suspension in the transitional flow regime with Newtonian fluids. Chemical Engineering Research & Design, 77 (A8). pp. 721-727. ISSN 0263-8762

Ibrahim, S. and Nienow, A.W. (1996) Particle suspension in the turbulent regime: the effect of impeller type and impeller/vessel configuration. Chemical Engineering Research & Design, 74 (A6). pp. 679-688. ISSN 0263-8762

Ibrahim, S. and Nienow, A.W. (1995) Power curves and flow patterns for a range of impellers in Newtonian fluids: 40<Re<5×10(5). Chemical Engineering Research and Design, 73 (A5). pp. 485-491. ISSN 0263-8762

Ibrahim, S. and Nienow, A.W. (2004) Suspension of microcarriers for cell culture with axial flow impellers. Chemical Engineering Research & Design, 82 (A9). pp. 1082-1088. ISSN 0263-8762

Ibrahim, S. and Vikineswary, S. and Al-Azad, S. and Chong, L.L. (2006) The effects of light intensity, inoculum size, and cell immobilisation on the treatment of sago effluent with Rhodopseudomonas palustris strain B1. Biotechnology and Bioprocess Engineering, 11 (5). pp. 377-381. ISSN 1226-8372

Ibrahim, S. and Wong, S.D. and Baker, I.F. and Zamzam, Z. and Sato, M. and Kato, Y. (2015) Influence of geometry and slurry properties on fine particles suspension at high loadings in a stirred vessel. Chemical Engineering Research and Design, 94. pp. 324-336. ISSN 0263-8762

Ibrahim, Shaliza and Nienow, A.W. (2010) The effect of viscosity on particle suspension in an aerated stirred vessel with different impellers and bases. Chemical Engineering Communications, 197 (4). pp. 434-454. ISSN 0098-6445

Ibrahim, Shaliza and Nienow, Alvin W. (1994) The effect of viscosity on mixing pattern and solid suspension in stirred vessels. In: 8th European Conference on Mixing, 21-23 September 1994, Cambridge, England.

Ibrahim, Z. and Khalid, N.K. and Mukred, J.A.A. and Buyamin, S. and Yusof, Z.M. and Saaid, M.F.M. and Mokhtar, N. and Engelbrecht, A.R. (2012) A DNA sequence design for DNA computation based on binary vector evaluated particle swarm optimization. International Journal of Unconventional Computing, 8 (2). pp. 119-137. ISSN 15487199

Ibrehem, A.S. (2009) Hybrid Modeling Of Well-Mixed Model For Fluidized Bed Reactors Using Artificial Neural Networks. In: International Engineering Convention, 11-14 May 2009, Damascus, Syria.. (Submitted)

Ibrehem, A.S. and Hussain, M.A. and Ghasem, N.M. (2009) Advanced control of a fluidized bed using a model-predictive controller. Australian Journal of Basic and Applied Sciences, 3 (4). pp. 3954-3974. ISSN 19918178

Ibrehem, A.S. and Hussain, M.A. and Ghasem, N.M. (2012) Decentralized advanced model predictive controller of fluidized-bed for polymerization process. Iranian Journal of Chemistry & Chemical Engineering-International English Edition, 31 (4). pp. 91-117. ISSN 1021-9986

Ibrehem, A.S. and Hussain, M.A. and Ghasem, N.M. (2008) Mathematical model and advanced control for gas-phase olefin polymerization in fluidized-bed catalytic reactors. Chinese Journal of Chemical Engineering, 16 (1). pp. 84-89. ISSN 1004-9541

Ibrehem, A.S. and Hussain, M.A. and Ghasem, N.M. (2009) Modified mathematical model for gas phase olefin polymerization in fluidized-bed catalytic reactor. Chemical Engineering Journal, 149 (1-3). pp. 353-362. ISSN 1385-8947

Ibrehem, A.S. and Hussain, M.A. (2009) Prediction of bubble size in bubble columns using artificial neural network. Journal of Applied Sciences, 9 (17). pp. 3196-3198. ISSN 1812-5654

Igroufa, Samira and Hashim, Roslan and Taib, Samsudin (2010) Mapping of salt-water intrusion by geoelectrical imaging in Carey Islands. In: 5th International Symposium on Hydrocarbons & Chemistry (ISHC5), Sidi Fredj, Algiers, 23 - 25 May 2010. (Unpublished)

Ihwan, G. and Salwa Hanim, A.R. and Siti Zawiah, M.D. and Hideki, A. and Alva Edy, T. and Novita, S. (2017) Cultural influences on choosing green products: An empirical study in Malaysia. Sustainable Development. p. 1.

Ijam, A. and Saidur, R. (2012) Nanofluid as a coolant for electronic devices (cooling of electronic devices). Applied Thermal Engineering, 32. pp. 76-82. ISSN 1359-4311

Ijam, A. and Saidur, R. and Ganesan, P. (2012) Cooling of minichannel heat sink using nanofluids. International Communications in Heat and Mass Transfer, 39 (8). pp. 1188-1194. ISSN 0735-1933

Ijam, A. and Saidur, R. and Ganesan, P. and Golsheikh, A.M. (2015) Stability, therrno-physical properties, and electrical conductivity of graphene oxide-deionized water/ethylene glycol based nanofluid. International Journal of Heat and Mass Transfer, 87. pp. 92-103. ISSN 0017-9310

Illias, H. and Low, T.J. and Bakar, A.H.A. and Mokhlis, H. (2012) Partial discharge simulation under various applied voltage waveforms. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Illias, H. and Teo, S.Y. and Bakar, A.H.A. and Mokhlis, H. and Chen, G. and Lewin, P.L. (2012) Partial discharge patterns in high voltage insulation. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Illias, H. and Tunio, M.A. and Bakar, A.H.A. and Mokhlis, H. (2012) Distribution of electric field in capacitor and surge arrester bushings. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Illias, H.A. and Bakar, A.H.A. and Mokhlis, H. and Halim, S.A. (2012) Calculation of inductance and capacitance in power system transmission lines using finite element analysis method. Obliczenia indukcyjności i pojemności linii przesyłowej z wykorzystaniem metody elementu skończonego, 88 (10 A). pp. 278-283. ISSN 00332097

Illias, H.A. and Bakar, A.H.A. and Mokhlis, H. and Tunio, M.A. and Chen, G. and Lewin, P.L. and Ariffin, A.M. (2012) Simulation of partial discharge within a void under square waveform applied voltage. In: 2012 IEEE Conference on Electrical Insulation and Dielectric Phenomena, CEIDP 2012, 2012, Montreal, QC.

Illias, H.A. and Chai, X.R. and Abu Bakar, A.H. and Mokhlis, H. (2015) Transformer incipient fault prediction using combined artificial neural network and various particle swarm optimisation techniques. PLoS ONE, 10 (6). p. 16. ISSN 1932-6203

Illias, H.A. and Lee, Z.H. and Bakar, A.H.A. and Mokhlis, H. and Ariffin, A.M. (2012) Distribution of electric field in medium voltage cable joint geometry. In: 2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012, 2012, Bali.

Illias, H.A. and Lee, Z.H. and Bakar, A.H.A. and Mokhlis, H. and Chen, G. and Lewin, P.L. (2012) Electric field distribution in 132 kV one piece premolded cable joint structures. In: 2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012, 2012, Bali.

Illias, H.A. and Ng, Q.L. and Bakar, A.H.A. and Mokhlis, H. and Ariffin, A.M. (2012) Electric field distribution in 132 kV XLPE cable termination model from finite element method. In: 2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012, 2012, Bali.

Illias, Hazlee Azil and Tunio, M.A. and Bakar, Ab Halim Abu and Mokhlis, Hazlie and Chen, G. (2014) Partial discharge behaviours within a void-dielectric system under square waveform applied voltage stress. IET Science, Measurement & Technology, 8 (2). pp. 81-88. ISSN 1751-8822

Imran, H.M. and Akib, S. and Karim, M.R. (2013) Permeable pavement and stormwater management systems: a review. Environmental Technology, 34 (18). pp. 2649-2656. ISSN 0959-3330

Imtenan, S. and Masjuki, Haji Hassan and Varman, M. and Fattah, I.M.R. (2015) Evaluation of n-butanol as an oxygenated additive to improve combustion-emission-performance characteristics of a diesel engine fuelled with a diesel-calophyllum inophyllum biodiesel blend. RSC Advances, 5 (22). pp. 17160-17170. ISSN 2046-2069

Iqbal, S.M.A. and Mekhilef, S. and Soin, N. and Omar, R. (2011) Buck and boost converter design optimization parameters in modern VLSI technology. In: 12th International Conference and Seminar on Micro/Nanotechnologies and Electron Devices, EDM'2011, Erlagol, Altai.

Iqbal, S.M.A. and Mekhilef, S. and Soin, N. and Omar, R. (2011) Dc-Dc buck and boost converter design issues in recent VLSI platform. In: 2011 IEEE Regional Symposium on Micro and Nano Electronics, RSM 2011, Kota Kinabalu, Sabah.

Irwan, N. and Mohd Rafie, J. and Iskandar, I.Y. and Bee, C.A. and Andriyana, A. and UNSPECIFIED (2013) Synthesis, characterization and stability of superparamagnetic maghemite nanoparticle suspension. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Isa, M.I.N. and Arof, Abdul Kariem (2009) Ionic transport study of plasticized salicylic acid doped polymethylmethacrylate based electrolytes. In: National Workshop on Functional Materials 2009, 16 June 2009, Centre For Ionics, University of Malaya.

Ishak, N.H. and Che’ Ani, A.I. and Omar, Y. and Ramly, A. (2009) Identification of leakage syndrome towards the sustainability of residential buildings In Malaysia. In: International Engineering Convention, 11-14 May 2009, Damascus, Syria. (Submitted)

Ishaque, K. and Salam, Z. and Amjad, M. and Mekhilef, S. (2012) An improved particle swarm optimization (PSO) based MPPT for PV With reduced steady-state oscillation. Power Electronics, IEEE Transactions on, 27 (8). pp. 3627-3638. ISSN 0885-8993

Ishaque, K. and Salam, Z. and Mekhilef, S. and Shamsudin, A. (2012) Parameter extraction of solar photovoltaic modules using penalty-based differential evolution. Applied Energy, 99. pp. 297-308. ISSN 03062619

Islam, A. and Jameel, M. and Ahmad, Syed Ishtiaq and Salman, F.A. and Jumaat, M.Z. (2011) Engendering earthquake response spectra for Dhaka region usable in dynamic analysis of structures. Scientific Research and Essays, 6 (16). pp. 3519-3530. ISSN 1992-2248

Islam, A. and Jameel, M. and Jumaat, M.Z. (2011) Seismic isolation in buildings to be a practical reality: behavior of structure and installation technique. Journal of Engineering and Technology Research, 3 (4). pp. 99-117. ISSN 2006-9790

Islam, A.B.M. and Jameel, Mohammed and Jumaat, M.Z. and Shirazi, S.M. and Salman, Firas A. (2012) Review of offshore energy in Malaysia and floating spar platform for sustainable exploration. Renewable and Sustainable Energy Reviews, 16 (8). pp. 6268-6284. ISSN 1364-0321

Islam, A.B.M. and Jameel, Mohammed and Uddin, Md Alhaz and Jumaat, M.Z. (2012) Competent building elevation for incorporating base isolation in aseismic structure. Procedia EngineeringInternational Conference on Advances Science and Contemporary Engineering 2012, 50. pp. 882-892. ISSN 1877-7058

Islam, A.B.M.S. and Ahmad, Syed Ishtiaq and Jameel, M. and Jumaat, M.Z. (2010) Seismic base isolation for buildings in regions of low to moderate seismicity: practical alternative design. Practice Periodical on Structural Design and Construction, 17 (1). pp. 13-20. ISSN 1084-0680

Islam, A.B.M.S. and Hussain, R.R. and Jameel, M. and Jumaat, M.Z. (2012) Non-linear time domain analysis of base isolated multi-storey building under site specific bi-directional seismic loading. Automation in Construction, 22. pp. 554-566. ISSN 0926-5805

Islam, A.B.M.S. and Hussain, R.R. and Jameel, M. and Jumaat, M.Z. (2012) Non-linear time domain analysis of base isolated multi-storey building under site specific bi-directional seismic loading. Automation in Construction, 22. pp. 554-566. ISSN 0926-5805

Islam, A.B.M.S. and Jameel, M. and Jumaat, M.Z. (2012) Oil and gas energy potential at Malaysian seabed and spar platform for deepwater installation. International Journal of Green Energy, 9 (2). pp. 111-120. ISSN 1543-5075

Islam, A.B.M.S. and Jameel, M. and Jumaat, M.Z. and Rahman, M.M. (2013) Optimization in structural altitude for seismic base isolation at medium risk earthquake disaster region. Disaster Advances, 6 (1). pp. 23-34. ISSN 0974-262X

Islam, A.B.M.S. and Jameel, M. and Uddin, M.A. and Ahmad, Syed Ishtiaq (2011) Simplified design guidelines for seismic base isolation in multi-storey buildings for Bangladesh National Building Code (BNBC). International Journal of Physical Sciences, 6 (23). pp. 5467-5486. ISSN 1992 - 1950

Islam, A.B.M.S. and Jameel, Mohammed and Ahmad, Syed Ishtiaq and Jumaat, M.Z. (2011) Study on corollary of seismic base isolation system on buildings with soft story. International Journal of the Physical Sciences, 6 (11). pp. 2654-2661. ISSN 1992-1950

Islam, M.R. and Rahim, N.A. and Solangi, K.H. and Saidur, R. (2012) Assessing wind energy potentiality for selected sites in Malaysia. Energy Education Science and Technology Part a-Energy Science and Research, 29 (1). pp. 611-626. ISSN 1308-772X

Islam, M.R. and Saidur, R. and Rahim, N.A. (2011) Assessment of wind energy potentiality at Kudat and Labuan, Malaysia using Weibull distribution function. Energy, 36 (2). pp. 985-992. ISSN 0360-5442

Islam, M.R. and Saidur, R. and Rahim, N.A. and Solangi, K.H. (2009) Renewable energy research in Malaysia. Engineering e-Transaction, 4 (2). pp. 69-72. ISSN 1823-6379

Islam, M.R. and Saidur, R. and Rahim, N.A. and Solangi, K.H. (2010) Usage of solar energy and its status in Malaysia. Engineering e-Transaction, 5 (1). pp. 6-10. ISSN 1823-6379

Islam, M.S. and Hashim, Roslan (2009) Bearing capacity of stabilised tropical peat by deep mixing method. Australian Journal of Basic and Applied Sciences, 3 (2). pp. 682-688. ISSN 19918178

Islam, M.S. and Hashim, Roslan (2010) Behaviour of stabilised peat: a field study. Scientific Research and Essays, 5 (17). pp. 2366-2374. ISSN 1992-2248

Islam, M.S. and Yusoff, R. and Ali, B.S. and Islam, M.N. and Chakrabarti, M.H. (2011) Degradation studies of amines and alkanolamines during sour gas treatment process. International Journal of Physical Sciences, 6 (25). pp. 5883-5896. ISSN 19921950

Islam, M.T. and Ahsan, M.R. and Ullah, M.H. (2015) A new biopolymer substrate-based compact monopole antenna covering RFID, WiMAX, and C/X-band. Microwave and Optical Technology Letters, 57 (9). pp. 2002-2005. ISSN 0895-2477

Islam, S. and Hashim, Roslan (2008) Stabilization of peat by deep mixing method: a critical review of the state of practics. Electronic Journal of Geotechnical Engineering, 13 H. ISSN 10893032

Islam, S.M. and Hashim, R. and Islam, A.B.M.S. (2014) Behaviour of peat-added composite bricks in low-cost building construction. Materials Research Innovations, 18 (S6). pp. 1-5.

Ismail, L. and Ramesh, S. and Tan, W. and Arof, Abdul Kariem (2009) Mixed-doped lithium nickel vanadate as cathode material by wet chemistry and polymer precursor method. In: National Workshop on Functional Materials 2009, 16 June 2009, Centre for Ionics,University of Malaya.

Ismail, L. and Teo, L.P. and Arof, Abdul Kariem (2009) Conductivity, dielectric relaxation and structural studies of PEO complexed with lithium acetate and lithium triflate salts. In: National Workshop on Functional Materials 2009, 16 June 2009, Centre For Ionics, University of Malaya.

Ismail, M.A. and Ahmad, F. and Harun, Sulaiman Wadi and Arof, Hamzah and Ahmad, Harith (2013) A Q-switched erbium-doped fiber laser with a graphene saturable absorber. Laser Physics Letters, 10 (2). ISSN 1612-2011

Ismail, M.A. and Tan, S.J. and Shahabuddin, N.S. and Harun, Sulaiman Wadi and Arof, Hamzah and Ahmad, Harith (2012) Performance comparison of mode-locked erbium-doped fiber laser with nonlinear polarization rotation and saturable absorber approaches. Chinese Physics Letters, 29 (5). ISSN 0256-307X

Ismail, M.S. and Moghavvemi, M. and Mahlia, T.M.I. (2013) Analysis and evaluation of various aspects of solar radiation in the Palestinian territories. Energy Conversion and Management, 73. pp. 57-68. ISSN 0196-8904

Ismail, M.S. and Moghavvemi, M. and Mahlia, T.M.I. (2013) Characterization of PV panel and global optimization of its model parameters using genetic algorithm. Energy Conversion and Management, 73. pp. 10-25. ISSN 0196-8904

Ismail, M.S. and Moghavvemi, M. and Mahlia, T.M.I. (2013) Current utilization of microturbines as a part of a hybrid system in distributed generation technology. Renewable and Sustainable Energy Reviews, 21. pp. 142-152. ISSN 1364-0321

Ismail, M.S. and Moghavvemi, M. and Mahlia, T.M.I. (2013) Design of an optimized photovoltaic and microturbine hybrid power system for a remote small community: Case study of Palestine. Energy Conversion and Management, 75. pp. 271-281. ISSN 0196-8904

Ismail, M.S. and Moghavvemi, M. and Mahlia, T.M.I. (2013) Energy trends in Palestinian territories of West Bank and Gaza Strip: possibilities for reducing the reliance on external energy sources. Renewable and Sustainable Energy Reviews, 28. pp. 117-129. ISSN 13640321

Ismail, M.S. and Moghavvemi, M. and Mahlia, T.M.I. (2013) Optimization of a PV/microturbine hybrid system for tropical climates. In: 2013 3rd International Conference on Electric Power and Energy Conversion Systems, EPECS 2013, 2-4 October 2013, Istanbul, Turkey.

Ismail, M.S. and Moghavvemi, M. and Mahlia, T.M.I. (2013) Techno-economic analysis of an optimized photovoltaic and diesel generator hybrid power system for remote houses in a tropical climate. Energy Conversion and Management, 69. pp. 163-173. ISSN 01968904

Ismail, N.A. and Annuar, M.S.M. and Ibrahim, S. (2011) Dye decolorization by immobilized laccase: statistical optimization and effect of impeller geometry. International Journal of Chemical Reactor Engineering, 9. ISSN 1542-6580

Ismail, N.A. and Kasim, L.M. and Mokhtar, N.F. and Yaakub, T.S.T. and Mokhlis, H. (2010) Digital analysis and development of ride-through capability of ac contactor with respect to voltage sag characteristics. In: Computer and Automation Engineering (ICCAE), 2010 The 2nd International Conference on, 2010.

Ismail, Z. and Abdul Razak, H. and Abdul Rahman, A.G. (2006) Determination of damage location in RC beams using mode shape derivatives. Engineering Structures, 28 (11). pp. 1566-1573. ISSN 0141-0296

Ismail, Z. and Aziz, N.A. and Hashim, Roslan (2007) Seawater intrusion into groundwater, peninsular Malaysia. Journal of Environmental Hydrology, 15. pp. 1-8. ISSN 10583912

Ismail, Z. and Hashim, Roslan (2006) Seepage of contaminants from waste containment. Journal of Environmental Hydrology, 14. pp. 1-9. ISSN 10583912

Ismail, Z. and Othman, S.Z. and Law, K.H. and Sulaiman, A.H. and Hashim, R. (2015) Comparative performance of water hyacinth (Eichhornia crassipes) and water lettuce (Pista stratiotes) in preventing nutrients build-up in municipal wastewater. Clean-Soil Air Water, 43 (4). pp. 521-531. ISSN 1863-0650

Ismail, Z. and Razak, H.A. and Ibrahim, Z. and Rahman, A.G.A. and Hin, P.A. (2001) Detection of defects in reinforced concrete beams using modal data. Proceedings of the International Modal Analysis Conference - IMAC, 2. pp. 1358-1362. ISSN 10466770

Issabayeva, G. and Aroua, M.K. (2011) Removal of copper and zinc ions onto biomodified palm shell activated carbon. World Academy of Science, Engineering and Technology, 76. pp. 259-262. ISSN 2010-376X

Issabayeva, G. and Aroua, M.K. and Sulaiman, N.M. (2008) Continuous adsorption of lead ions in a column packed with palm shell activated carbon. Journal of Hazardous Materials, 155 (1-2). pp. 109-113. ISSN 0304-3894

Issabayeva, G. and Aroua, M.K. and Sulaiman, N.M. (2006) Electrodeposition of copper and lead on palm shell activated carbon in a flow-through electrolytic cell. Desalination, 194 (1-3). pp. 192-201. ISSN 1476-914X

Issabayeva, G. and Aroua, M.K. and Sulaiman, N.M. (2010) Study on palm shell activated carbon adsorption capacity to remove copper ions from aqueous solutions. Desalination, 262 (1-3). pp. 94-98. ISSN 0011-9164

Issabayeva, G. and Aroua, M.K. and Sulaiman, N.M.N. (2006) Removal of lead from aqueous solutions on palm shell activated carbon. Bioresource Technology, 97 (18). pp. 2350-2355. ISSN 0960-8524

J

Jaddoa, M.F. and Razak, M.Z.A. and Salim, M.A.M. and Sharbirin, A.S. and Nayan, N. and Ismail, Mohammad Faizal and Ahmad, Harith (2016) Tunable single wavelength erbium-doped fiber ring laser based on in-line Mach-Zehnder strain. Optik, 127 (20). pp. 8326-8332. ISSN 0030-4026

Jafar, N. and Soin, N. (2014) Analog and short channel effects performance of Sub-100 nm graded channel fully depleted silicon on insulator (SOI). In: WSEAS International Conference on Microelectronics, Nanoelectronics, Optoelectronics, May 30 - June 1 2009, Istanbul, Turkey. (Submitted)

Jafar, N. and Soin, N. (2009) Analog and short channel effects performance of sub-100 nm graded channel fully depleted silicon on insulator (SOI). In: Advances in Microelectronics, Nanoelectronics and Optoelectronics, 30 May-1 June 2009, Istanbul, Turkey. (Submitted)

Jahangirzadeh, A. and Akib, S. (2015) Experimental study for determination of collar dimensions around bridge pier. Baltic Journal of Road and Bridge Engineering, 10 (1). pp. 89-96. ISSN 1822-427X

Jahangirzadeh, A. and Akib, S. and Kamali, B. and Shamsudin, N.S. and Kimiaei, K. (2012) Effects of construction of coastal structure on ecosystem. In: World Academy of Science, Engineering and Technology, 13-14 May 2012, Amsterdam, The Netherlands.

Jahanshahi, P. and Md Dawal, S.Z. and Ibrahim, F. and Nozari, A.A. and Soin, N. (2010) Development of a low-cost and portable device controller for point-of-care medical diagnostics. In: 2010 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2010, 2010, Kuala Lumpur.

Jahirul, M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Kalam, M.A. and Jayed, M.H. and Wazed, M.A. (2010) Comparative engine performance and emission analysis of CNG and gasoline in a retrofitted car engine. Applied Thermal Engineering, 30 (14-15). pp. 2219-2226. ISSN 1359-4311

Jahirul, M.I. and Saidur, Rahman and Hasanuzzaman, M. and Masjuki, Haji Hassan and Kalam, M.A. (2007) A comparison of the air pollution of gasoline and CNG driven car for Malaysia. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 130-138. ISSN 18230334

Jahirul, M.I. and Saidur, Rahman and Masjuki, Haji Hassan (2009) Application of artificial neural network to predict brake specific fuel consumption of retrofitted cng engine. International Journal of Mechanical and Materials Engineering, 4 (3). pp. 249-255. ISSN 1823-0334

Jahirul, M.I. and Saidur, Rahman and Masjuki, Haji Hassan (2010) Predictability of artificial neural network (ANN) in performance prediction of a retrofitted CNG engine. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 268-275. ISSN 1823-0334

Jais, F.M. and Ibrahim, S. and Yoon, Y. and Jang, M. (2016) Enhanced arsenate removal by lanthanum and nano–magnetite composite incorporated palm shell waste–based activated carbon. Separation and Purification Technology, 169. pp. 93-102. ISSN 1383-5866

Jakeria, M.R. and Fazal, M.A. and Haseeb, A.S. Md. Abdul (2013) Influence of copper and mild steel on stability of palm biodiesel. In: 1st International Conference on the Science & Engineering of Materials, 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Jamaludin, J. and Rahim, N.A. and Hew, W.P. (2016) An 11-switch multilevel inverter with a modified space vector modulation. Turkish Journal of Electrical Engineering and Computer Sciences, 24. pp. 171-183. ISSN 1300-0632

Jameel, A.B.M.M. and Islam, S. and Khaleel, M. and Jumaat, M.Z. (2012) Nonlinear finite element analysis of spar platform. Advanced Science Letters, 13 (1). pp. 723-726. ISSN 19366612

Jameel, M. and Ahmad, S. and Asme, M (2011) Fatigue reliability assessment of coupled spar-mooring system. Omae2011: Proceedings of the Asme 30th International Conference on Ocean, Offshore and Arctic Engineering, Vol 2: Structures, Safety and Reliability . Amer Soc Mechanical Engineers, New York, pp. 497-505.

Jameel, M. and Ahmad, S. and Islam, A. and Jumaat, M.Z. (2011) Nonlinear analysis of fully coupled integrated spar-mooring line system. In: Int. Offshore Polar Engineering Conference (ISOPE 2011). Maui, Hawii, 2011, Maui, Hawaii, USA.

Jameel, M. and Islam, A.B.M. and Salman, F.A. and Khaleel, M. and Jumaat, M.Z. (2012) Wave data for shallow and deep water sedimentary basins of Malaysia. Advanced Science Letters, 14 (1). pp. 360-364. ISSN 1936-6612

Jameel, M. and Saiful Islam, A.B.M. and Hussain, R.R. and Khaleel, M. and Zaheer, M.M. (2012) Optimum structural modelling for tall buildings. The Structural Design of Tall and Special Buildings. ISSN 1541-7808

Jamian, J.J. and Abdullah, M.N. and Mokhlis, H. and Mustafa, M.W. and Bakar, A.H.A. (2014) Global Particle Swarm Optimization for High Dimension Numerical Functions Analysis. Journal of Applied Mathematics, 2014. pp. 1-14. ISSN 1110-757X

Jamian, J.J. and Aman, M.M. and Mustafa, M.W. and Jasmon, G.B. and Mokhlis, H. and Bakar, A.H.A. (2013) Comparative study on optimum DG placement for distribution network. Przegląd Elektrotechniczny, 89 (3 A). pp. 199-205. ISSN 00332097

Jamian, J.J. and Aman, M.M. and Mustafa, M.W. and Jasmon, G.B. and Mokhlis, H. and Bakar, A.H.A. and Abdullah, M.N. (2012) Optimum multi DG units placement and sizing based on voltage stability index and PSO. In: 2012 47th International Universities Power Engineering Conference, UPEC 2012, 2012, London.

Jamian, J.J. and Lim, Z.J. and Dahalan, W.M. and Mokhlis, H. and Mustafa, M.W. and Abdullah, M.N. (2012) Reconfiguration distribution network with multiple distributed generation operation types using simplified artificial bees colony. International Review of Electrical Engineering, 7 (4). pp. 5108-5118. ISSN 1827-6660

Jamian, J.J. and Mohd Zin, A.A. and Saini, M. and Mustafa, M.W. and Mokhlis, H. (2013) A Novel TVA-REPSO technique in solving generators sizing problems for south Sulawesi network. Przegląd Elektrotechniczny, 89 (2 A). pp. 170-174. ISSN 00332097

Jamian, J.J. and Musa, H. and Mustafa, M.W. and Mokhlis, H. and Adamu, S.S. (2011) Combined voltage stability index for charging station effect on distribution network. International Review of Electrical Engineering-Iree, 6 (7). pp. 3175-3184. ISSN 1827-6660

Jamian, J.J. and Mustafa, M.W. and Mokhlis, H. and Abdullah, M.N. (2012) Comparative study on distributed generator sizing using three types of Particle Swarm Optimization. In: Intelligent Systems, Modelling and Simulation (ISMS), 2012 Third International Conference on, 2012.

Jamian, J.J. and Mustafa, M.W. and Mokhlis, H. and Bahamdin, M.A. (2011) Conceptual data management and communication for smart distribution system. In: Clean Energy and Technology (CET), 2011 IEEE First Conference on, 2011.

Jamian, J.J. and Mustafa, M.W. and Mokhlis, H. and Baharudin, M.A. (2011) Smart grid communication concept for frequency control in distribution system. In: Power Engineering and Optimization Conference (PEOCO), 2011 5th International, 2011, Shah Alam, Selangor (Malaysia).

Jamian, J.J. and Mustafa, M.W. and Mokhlis, H. and Usman, J. (2012) Distributed generator sizing: an iteration Particle Swarm Optimization approach. In: Proceedings of the IASTED International Conference Power and Energy Systems, AsiaPES, 2012.

Jamian, J.J. and Mustafa, M.W. and Muda, Z. and Mokhlis, H. and Aman, M.M. (2012) Effect of load models on Battery-Switching Station allocation in distribution network. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Jamil, Z. and Annuar, M.S.M. and Ibrahim, S. and Vikineswary, S. (2012) Kinetic modeling of batch photofermentation hydrogen gas production by Rhodopseudomonas palustris PBUM001. Journal of Renewable and Sustainable Energy, 4 (4). ISSN 1941-7012

Jamil, Z. and Mohamad Annuar, M.S. and Ibrahim, S. and Vikineswary, S. (2009) Optimization of phototrophic hydrogen production by Rhodopseudomonas palustris PBUM001 via statistical experimental design. International Journal of Hydrogen Energy, 34 (17). pp. 7502-7512. ISSN 0360-3199

Jamil, Z. and Yunus, N.A.M. and Suffian, M. and Ibrahim, S. (2013) Anaerobic co-digestion of food waste for biohydrogen production. In: 2013 IEEE Business Engineering and Industrial Applications Colloquium, BEIAC 2013, 2013, Langkawi.

Jang, M. (2010) Application of portable X-ray fluorescence (pXRF) for heavy metal analysis of soils in crop fields near abandoned mine sites. Environmental Geochemistry and Health, 32 (3). pp. 207-216. ISSN 0269-4042

Jang, M. and Cannon, F.S. and Parette, R.B. and Yoon, S.J. and Chen, W. (2009) Combined hydrous ferric oxide and quaternary ammonium surfactant tailoring of granular activated carbon for concurrent arsenate and perchlorate removal. Water Research, 43 (12). pp. 3133-3143. ISSN 0043-1354

Jang, M. and Chen, W. and Cannon, F.S. (2008) Preloading hydrous ferric oxide into granular activated carbon for arsenic removal. Environmental Science and Technology, 42 (9). pp. 3369-3374. ISSN 0013936X

Jang, M. and Hong, S.M. and Park, J.K. (2005) Characterization and recovery of mercury from spent fluorescent lamps. Waste Management, 25 (1). pp. 5-14. ISSN 0956053X

Jang, M. and Hwang, J.S. and Choi, S.I. (2007) Sequential soil washing techniques using hydrochloric acid and sodium hydroxide for remediating arsenic-contaminated soils in abandoned iron-ore mines. Chemosphere, 66 (1). pp. 8-17. ISSN 0045-6535

Jang, M. and Jung, S.H. and Sang, I.C. and Jae, K.P. (2005) Remediation of arsenic-contaminated soils and washing effluents. Chemosphere, 60 (3). pp. 344-354. ISSN minjang@um.edu.my

Jang, M. and Kwon, H. (2011) Pilot-scale tests to optimize the treatment of net-alkaline mine drainage. Environmental Geochemistry and Health, 33 (SUPPL.). pp. 91-101. ISSN 0269-4042

Jang, M. and Lee, H.J. and Shim, Y. (2010) Rapid removal of fine particles from mine water using sequential processes of coagulation and flocculation. Environmental Technology, 31 (4). pp. 423-432. ISSN 0959-3330

Jang, M. and Min, S.H. and Kim, T.H. and Park, J.K. (2006) Removal of arsenite and arsenate using hydrous ferric oxide incorporated into naturally occurring porous diatomite. Environmental Science and Technology, 40 (5). pp. 1636-1643. ISSN 0013936X

Jang, M. and Min, S.H. and Park, J.K. and Tlachac, E.J. (2007) Hydrous ferric oxide incorporated diatomite for remediation of arsenic contaminated groundwater. Environmental Science and Technology, 41 (9). pp. 3322-3328. ISSN 0013-936X

Jang, M. and Park, J.K. and Shin, E.W. (2004) Lanthanum functionalized highly ordered mesoporous media: implications of arsenate removal. Microporous and Mesoporous Materials, 75 (1-2). pp. 159-168. ISSN 1387-1811

Jang, M. and Shin, E.W. and Park, J.K. and Choi, S.I. (2003) Mechanisms of arsenate adsorption by highly-ordered nano-structured silicate media impregnated with metal oxides. Environmental Science and Technology, 37 (21). pp. 5062-5070. ISSN 0013-936X

Jasim, A.A. and Harun, Sulaiman Wadi and Arof, Hamzah and Ahmad, Harith (2013) Inline microfiber Mach–Zehnder interferometer for high temperature sensing. IEEE Sensors Journal, 13 (2). pp. 626-628. ISSN 1530-437X

Jasim, A.A. and Harun, Sulaiman Wadi and Muhammad, M.Z. and Arof, Hamzah and Ahmad, Harith (2013) Current sensor based on inline microfiber Mach–Zehnder interferometer. Sensors and Actuators A: Physical, 192. pp. 9-12. ISSN 0924-4247

Jasim, A.A. and Lim, Kok Sing and Muhammad, M.Z. and Arof, Hamzah and Ahmad, Harith and Harun, Sulaiman Wadi (2012) Transmission characteristic of multi-turn microfiber coil resonator. Optics and Laser Technology, 44. pp. 1791-1795. ISSN 0030-3992

Jassim, Z.A. and Fayyadh, M.M. and Mustapha, F. (2011) Health monitoring of cantilever rod using vibration test “theoretical and numerical study". In: 17th International Congress on Sound and Vibration 2010, ICSV 2010, 18-22 July 2011, Cairo, Egypt.

Javed, M.F. and Sulong, N.H.R. and Memon, S.A. and Rehman, S.K.U. and Khan, N.B. (2017) FE modelling of the flexural behaviour of square and rectangular steel tubes filled with normal and high strength concrete. Thin-Walled Structures, 119. pp. 470-481. ISSN 0263-8231

Jayed, M.H. and Masjuki, Haji Hassan and Saidur, Rahman and Kalam, M.A. and Jahirul, M.I. (2009) Environmental aspects and challenges of oilseed produced biodiesel in Southeast Asia. Renewable and Sustainable Energy Reviews, 13 (9). pp. 2452-2462. ISSN 1364-0321

Jeirani, Z. and Mohamed Jan, B. and Noor, I.M. and See, C.H. and Saphanuchart, W. (2013) The Effect of Polymer on Triglyceride Microemulsion Formulation for Tertiary Oil Recovery. Industrial and Engineering Chemistry Research, 52 (44). pp. 15589-15593. ISSN 0888-5885

Jeirani, Z. and Mohamed Jan, B. and Si Ali, B. and Noor, I.M. and See, C.H. and Saphanuchart, W. (2013) Correlations between interfacial tension and cumulative tertiary oil recovery in a triglyceride microemulsion flooding. Journal of Industrial and Engineering Chemistry, 19 (4). pp. 1310-1314. ISSN 1226-086X

Jeirani, Z. and Mohamed Jan, B. and Si Ali, B. and Noor, I.M. and See, C.H. and Saphanuchart, W. (2013) Formulation and phase behavior study of a nonionic triglyceride microemulsion to increase hydrocarbon production. Industrial Crops and Products, 43. pp. 15-24. ISSN 0926-6690

Jeirani, Z. and Mohamed Jan, B. and Si Ali, B. and Noor, I.M. and See, C.H. and Saphanuchart, W. (2013) Formulation, optimization and application of triglyceride microemulsion in enhanced oil recovery. Industrial Crops and Products, 43. pp. 6-14. ISSN 0926-6690

Jeirani, Z. and Mohamed Jan, B. and Si Ali, B. and Noor, I.M. and See, C.H. and Saphanuchart, W. (2013) Prediction of Phase-Inversion Temperature of a Triglyceride Microemulsion Using Design of Experiments. Industrial & Engineering Chemistry Research, 52 (2). pp. 744-750. ISSN 0888-5885

Jeirani, Z. and Mohamed Jan, B. and Si Ali, B. and Noor, I.M. and See, C.H. and Saphanuchart, W. (2013) Prediction of the optimum aqueous phase composition of a triglyceride microemulsion using response surface methodology. Journal of Industrial and Engineering Chemistry, 19 (4). pp. 1304-1309. ISSN 1226-086X

Jeirani, Z. and Mohamed Jan, B. and Si Ali, B. and Noor, I.M. and See, C.H. and Saphanuchart, W. (2013) Prediction of water and oil percolation thresholds of a microemulsion by modeling of dynamic viscosity using response surface methodology. Journal of Industrial and Engineering Chemistry, 19 (2). pp. 554-560. ISSN 1226-086X

Jeirani, Z. and Mohamed Jan, B. and Si Ali, B. and Noor, I.M. and See, C.H. and Saphanuchart, W. (2012) The optimal mixture design of experiments: Alternative method in optimizing the aqueous phase composition of a microemulsion. Chemometrics and Intelligent Laboratory Systems, 112. pp. 1-7. ISSN 0169-7439

Jeirani, Z. and Mohamed Jan, B. and Si Ali, B. and See, C.H. and Saphanuchart, W. (2014) In Situ Prepared Microemulsion-polymer Flooding in Enhanced Oil Recovery—A Review. Petroleum Science and Technology, 32 (2). pp. 240-251. ISSN 1091-6466

Jeirani, Z. and Mohamed Jan, B. and Si Ali, B. and See, C.H. and Saphanuchart, W. (2014) Pre-prepared Microemulsion Flooding in Enhanced Oil Recovery: A Review. Petroleum Science and Technology, 32 (2). pp. 180-193. ISSN 1091-6466

Jeirani, Z. and Yusuf, M.M. and Jan, B.M. and Abdul Raman, A.A. (2012) Rheological study of saraline-based super light weight completion fluid in underbalanced perforation. Oil Gas-European Magazine, 38 (1). pp. 18-21.

Jing, L. and Mekhilef, S. (2008) DSP based implementation of adaptive speed controller for three-phase induction motor. In: 2008 IEEE Region 10 Conference, TENCON 2008, Hyderabad.

Johnson Alengaram, U. and Jumaat, M.Z. and Mahmud, H. and Fayyadh, M.M. (2011) Shear behaviour of reinforced palm kernel shell concrete beams. Construction and Building Materials, 25 (6). pp. 2918-2927. ISSN 09500618

Jumaat, M.Z. (1991) Analysis of built-up timber columns using matrix progression method. Journal of Structural Engineering, 117 (7). pp. 1911-1928. ISSN 0733-9445

Jumaat, M.Z. and Alam, M.A. (2008) Behaviour of U and L shaped end anchored steel plate strengthened reinforced concrete beams. European Journal of Scientific Research, 22 (2). pp. 184-196. ISSN 1450216X

Jumaat, M.Z. and Alam, M.A. (2011) Optimization of intermediate anchors to eliminate premature shear failure of CFRP laminate flexurally strengthened R.C beams. International Journal of Physical Sciences, 6 (2). pp. 182-192. ISSN 19921950

Jumaat, M.Z. and Alam, M.A. (2009) Performance of End Anchored Steel Plate and Cfrp Laminate Flexurally Strengthened R.C. Beams. In: International Engineering Convention, 11-14 May 2009, Damascus, Syria. (Submitted)

Jumaat, M.Z. and Alam, M.A. (2006) Problems associated with plate bonding methods of strengthening reinforced concrete beams. Journal of Applied Sciences Research, 2 (10). pp. 703-708.

Jumaat, M.Z. and Alam, M.A. (2009) Strengthening of R.C. beams using externally bonded plates and anchorages. Australian Journal of Basic and Applied Sciences, 3 (3). pp. 2207-2211. ISSN 19918178

Jumaat, M.Z. and Alam, M.A. (2008) Strengthening of RC beams using externally bonded plates and anchorages. Australian Journal of Basic and Applied Sciences, 3 (3). pp. 2207-2211. ISSN 1991-8178

Jumaat, M.Z. and Alam, M.D.A. (2010) Experimental and numerical analysis of end anchored steel plate and CFRP laminate flexurally strengthened reinforced concrete (rc) beams. International Journal of the Physical Sciences, 5 (2). pp. 132-144. ISSN 1992-1950

Jumaat, M.Z. and Alengaram, U.J. and Ahmmad, R. and Bahri, S. and Islam, A.B.M.S. (2015) Characteristics of palm oil clinker as replacement for oil palm shell in lightweight concrete subjected to elevated temperature. Construction and Building Materials, 101 (pt.1). pp. 942-951. ISSN 0950-0618

Jumaat, M.Z. and Alengaram, U.J. and Mahmud, H.B. (2009) Shear strength of oil palm shell foamed concrete beams. Materials & Design, 30 (6). pp. 2227-2236. ISSN 0261-3069

Jumaat, M.Z. and Bakar, A.A. and Razali, F.M. and Rahim, A.H.A. and Othman, J. (2006) The determination of the embedment strength of Malaysian hardwood. In: 9th World Conference on Timber Engineering 2006, WCTE 2006, 2006, Portland, OR.

Jumaat, M.Z. and Kabir, M.H. and Obaydullah, M. (2010) Structural performance of reinforced concrete beams repairing from spalling. European Journal of Scientific Research, 45 (1). pp. 89-102. ISSN 1450216X

Jumaat, M.Z. and Kabir, M.H. and Obaydullah, M. (2006) A review of the repair of reinforced concrete beams. Journal of Applied Science Research, 2 (6). pp. 317-326.

Jumaat, M.Z. and Mahmud, H. and Alengaram, U.J. (2009) Structural Behaviour Of Oil Palm Shell Concrete Beams. In: International Engineering Convention, 11-14 May 2009, Damascus, Syria. (Submitted)

Jumaat, M.Z. and Murty, B. (2004) Yield load prediction of nailed timber joints using nail diameter and timber specific gravity. Wood Science and Technology, 38 (8). pp. 599-615. ISSN 0043-7719

Jumaat, M.Z. and Rahim, A.H.A. and Othman, J. and Midon, M.S. (2006) Strength evaluation of oil palm stem trussed rafters. Construction and Building Materials, 20 (9). pp. 812-818. ISSN 0950-0618

Jumaat, M.Z. and Rahim, A.H.A. and Othman, J. and Razali, F.M. (2006) Timber engineering research and education in Malaysia. In: 9th World Conference on Timber Engineering 2006, WCTE 2006, 2006, Portland, OR.

Jumaat, M.Z. and Rahman, M.A. and Alam, M.A. and Rahman, M.M. (2011) Premature failures in plate bonded strengthened RC beams with an emphasis on premature shear: a review. International Journal of Physical Sciences, 6 (2). pp. 156-168. ISSN 19921950

Jumaat, M.Z. and Rahman, M.M. and Alam, M.A. (2010) Flexural strengthening of RC continuous T beam using CFRP laminate: a review. International Journal of the Physical Sciences, 5 (6). pp. 619-625. ISSN 1992-1950

Jumaat, M.Z. and Rahman, M.M. and Rahman, M.A. (2011) Review on bonding techniques of CFRP in strengthening concrete structures. International Journal of Physical Sciences, 6 (15). pp. 3567-3575. ISSN 19921950

Jumaat, M.Z. and Razali, F.M. and Rahim, A.H.A. (2008) Development of limit state design method for Malaysian bolted timber joints. In: 10th World Conference on Timber Engineering 2008, Miyazaki.

Jumaat, M.Z. and Tosee, V.R. (2008) An inestigation in mechanical properties and workability of lightweight concrete with various percentages of scoria instead of sand. In: 11th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC-11, Taipei.

Jumaat, S.A. and Musirin, I. and Murtadha, O.M. and Mokhlis, H. (2011) PSO Based technique for loss minimization considering voltage profile and cost function. In: Power Engineering and Optimization Conference (PEOCO), 2011 5th International, 2011, Shah Alam, Selangor (Malaysia).

Jumaat, S.A. and Musirin, I. and Othman, M.M. and Mokhlis, H. (2012) Computational intelligence based technique in multiple facts devices installation for power system security. Journal of Theoretical and Applied Information Technology, 46 (2). pp. 537-549. ISSN 1992-8645

Jumaat, S.A. and Musirin, I. and Othman, M.M. and Mokhlis, H. (2011) Optimal location and sizing of SVC using Particle Swarm Optimization technique. In: Informatics and Computational Intelligence (ICI), 2011 First International Conference on, 2011.

Jumaat, S.A. and Musirin, I. and Othman, M.M. and Mokhlis, H. (2012) Optimal placement and sizing of multiple FACTS devices installation. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Jumaat, S.A. and Musirin, I. and Othman, M.M. and Mokhlis, H. (2012) Particle Swarm Optimization techniques for optimal location and sizing of thyristor controlled series capacitor. In: 2012 International Conference on Innovation, Management and Technology Research, ICIMTR 2012, 2012, Malacca.

Jumaat, S.A. and Musirin, I. and Othman, M.M. and Mokhlis, H. (2012) Placement and sizing of thyristor controlled series compensator using PSO based technique for loss minimization. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Jumaat, S.A. and Musirin, I. and Othman, M.M. and Mokhlis, H. (2011) Transmission loss minimization using SVC based on particle swarm optimization. In: Industrial Electronics and Applications (ISIEA), 2011 IEEE Symposium on, 2011, Langkawi, Malaysia.

Jumaat, S.A. and Musirin, I. and Othman, M.M. and Moklis, H. (2012) Comparison of FACTS device installation in power transmission system. International Review on Modelling and Simulations, 5 (4). p. 1679. ISSN 1974-9821

Jung, C. and Phal, N. and Oh, J. and Chu, K.H. and Jang, M. and Yoon, Y. (2015) Removal of humic and tannic acids by adsorption-coagulation combined systems with activated biochar. Journal of Hazardous Materials, 300. pp. 808-814. ISSN 0304-3894

K

Kabir, S.M.A. and Alengaram, U.J. and Jumaat, M.Z. and Sharmin, A. and Islam, A. (2015) Influence of molarity and chemical composition on the development of compressive strength in POFA based geopolymer mortar. Advances in Materials Science and Engineering. p. 15. ISSN 1687-8434

Kabir, S.M.A. and Alengaram, U.J. and Jumaat, M.Z. and Yusoff, S. and Sharmin, A. and Bashar, I.I. (2017) Performance evaluation and some durability characteristics of environmental friendly palm oil clinker based geopolymer concrete. Journal of Cleaner Production, 161. pp. 477-492. ISSN 0959-6526

Kadir, M.F.Z. and Aspanut, Z. and Majid, S.R. and Arof, Abdul Kariem (2009) Conductivity studies of chitosan based solid polymer electrolyte incorporated with ionic liquid. In: National Workshop on Functional Materials 2009, 16 June 2009, Centre For Ionics, University of Malaya.

Kadir, M.N.A. and Mekhilef, S. and Hew, W.P. (2007) Comparison of basic direct torque control designs for permanent magnet synchronous motor. In: 7th International Conference on Power Electronics and Drive Systems, PEDS 2007, Bangkok.

Kadir, M.N.A. and Mekhilef, S. and Ping, H.W. (2010) Dual vector control strategy for a three-stage hybrid cascaded multilevel inverter. Journal of Power Electronics, 10 (2). pp. 155-164. ISSN 1598-2092

Kadir, M.N.A. and Mekhilef, S. and Ping, H.W. (2010) Voltage vector control of a hybrid three-stage 18-level inverter by vector decomposition. IET Power Electronics, 3 (4). pp. 601-611. ISSN 1755-4543

Kadir, M.N.A. and Mekhlif, S. and Ping, H.W. (2009) Novel control strategy for three-stage 18-level hybrid multilevel inverter. In: Systems, Signals and Devices, 2009. SSD'09. 6th International Multi-Conference on.

Kadivar, M.A. and Akhbari, J. and Yousefid, R. and Rahi, A. and Ghahramani Nick, M. (2014) Investigating the effects of vibration method on ultrasonic-assisted drilling of Al/SiCp metal matrix composites. Elsevier, 30. pp. 344-3450.

Kadri, N.A. and Raha, M.G. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar (2008) The first decade of biomedical engineering degree program at the University of Malaya: experiences and achievements. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Kadri, N.A. and Razak, M.A.A. and Ibrahim, F. (2012) Near real-time electrochemical analysis of carcinogenic cell lines using planar microelectrodes. International Journal of Electrochemical Science, 7 (6). pp. 5633-5642. ISSN 14523981

Kalam, M.A. and Masjuki, Haji Hassan and Mahlia, T.M.I. and Fuad, M.A. and Halim, K. and Ishak, A. and Khair, M. and Yusoff, A. and Shahrir, A. (2009) Experimental test of a new compressed natural gas engine with direct injection. In: SAE 2009 International Powertrains, Fuels & Lubricants Meeting, 15-17 June 2009, Florence, Italy.

Kalantar, Z. and Karim, M.R. and Abdel Aziz, M. (2011) Effect of the waste plastic bottles on properties of asphalt. In: Proceedings of the Eastern Asia Society for Transportation Studies, 20-23 Jun 2011, Jeju, Korea.

Kalantar, Z. and Mahrez, A. and Karim, M.R. (2009) Properties of Bituminous Binder Modified with High Density Polyethylene. In: International Engineering Convention, 11-14 May 2009, Damascus, Syria. (Submitted)

Kalantar, Z.N. and Karim, M.R. and Mahrez, A. (2012) A review of using waste and virgin polymer in pavement. Construction and Building Materials, 33. pp. 55-62. ISSN 0950-0618

Kalantari, Katayoon and Afifi, Amalina Muhammad and Nia, Pooria Moozarm and Izadiyan, Zahra and Kalantari, Alireza and Abouzari-lotf, Ebrahim (2018) Electro-Catalytic Behavior of Silver Nanoparticles Embedded in Potato and Tapioca Starch for Oxygen Reduction Reaction. Starch - Stärke, 71 (1-2). p. 1800038. ISSN 0038-9056

Kaliwon, J. and Sh Ahmad, S. and Abdul Aziz, A. (2010) Performance of oil palm EFB fibre reinforced concrete roof slates. Process Safety Progress. pp. 528-531. ISSN 1066-8527

Kamali, B. and Hashim, Roslan (2010) Bamboo foundation mat for rubble mound breakwaters on mud deposits. International Journal of the Physical Sciences, 5 (9). pp. 1406-1410. ISSN 1992-1950

Kamali, B. and Hashim, Roslan (2011) Mangrove restoration without planting. Ecological Engineering, 37 (2). pp. 387-391. ISSN 0925-8574

Kamali, B. and Hashim, Roslan (2009) Recent advances in stability formulae and damage description of breakwater armour layer. Australian Journal of Basic and Applied Sciences, 3 (3). pp. 2817-2827. ISSN 19918178

Kamali, B. and Hashim, Roslan and Akib, S. (2010) Efficiency of an integrated habitat stabilisation approach to coastal erosion management. International Journal of the Physical Sciences, 5 (9). pp. 1401-1405. ISSN 1992-1950

Kamali, S.K. and Mekhilef, S. (2009) Evaluation study on grid-connected PV system at University of Malaya. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, Kuala Lumpur.

Kamarudin, M.A. and Sahamir, S.R. and Datta, R.S. and Long, B.D. and Sabri, M.F.M. and Said, S.M. (2013) A Review on the Fabrication of Polymer-Based Thermoelectric Materials and Fabrication Methods. Scientific World Journal, 2013. pp. 1-17. ISSN 2356-6140

Kamarulzaman, N. and Yusoff, R. and Kamarudin, N. and Shaari, N.H. and Aziz, N.A.A. and Bustam, M.A. and Blagojevic, N. and Elcombe, M. and Blackford, M. and Avdeev, M. and Arof, Abdul Kariem (2009) Investigation of cell parameters, microstructures and electrochemical behaviour of LiMn(2)O(4) normal and nano powders. Journal of Power Sources, 188 (1). pp. 274-280. ISSN 0378-7753

Kamaruzzaman, S.N. and Zawawi, M.A.E. and Pitt, M. and Don, Z.M. (2010) Occupant feedback on indoor environmental quality in refurbished historic buildings. International Journal of Physical Sciences, 5 (3). pp. 192-199.

Kamyar, A. and Saidur, Rahman and Hasanuzzaman, M. (2012) Application of computational fluid dynamics (CFD) for nanofluids. International Journal of Heat and Mass Transfer, 55 (15-16). pp. 4104-4115. ISSN 0017-9310

Kanadasan, J. and Razak, H.A. (2014) Mix design for self-compacting palm oil clinker concrete based on particle packing. Materials & Design, 56. pp. 9-19. ISSN 02613069

Kanadasan, J. and Razak, Hashim Abdul (2015) Engineering and sustainability performance of self-compacting palm oil mill incinerated waste concrete. Journal of Cleaner Production, 89. pp. 78-86. ISSN 0959-6526

Kanadasan, Jegathish and Razak, Hashim Abdul and Subramaniam, Vijaya (2018) Properties of high flowable mortar containing high volume palm oil clinker (POC) fine for eco-friendly construction. Journal of Cleaner Production, 170. pp. 1244-1259. ISSN 0959-6526

Kanagasabi, S. and Kang, Y.L. and Manickam, M. and Ibrahim, S. and Pichiah, S. (2013) Intimate coupling of electro and biooxidation of tannery wastewater. Desalination and Water Treatment, 51 (34-36). pp. 6617-6623. ISSN 1944-3994

Kang, K. and Jang, M. and Cui, M. and Qiu, P. and Na, S. and Son, Y. and Khim, J. (2015) Enhanced sonocatalytic treatment of ibuprofen by mechanical mixing and reusable magnetic core titanium dioxide. Chemical Engineering Journal, 264. pp. 522-530. ISSN 1385-8947

Kang, Y.L. and Ibrahim, S. and Saravanan, P. (2015) Synergetic effect of conductive polymer poly(3,4-ethylenedioxythiophene) with different structural configuration of anode for microbial fuel cell application. Bioresource Technology, 189. pp. 364-369. ISSN 0960-8524

Kang, Y.L. and Pichiah, S. and Ibrahim, S. (2017) Facile reconstruction of microbial fuel cell (MFC) anode with enhanced exoelectrogens selection for intensified electricity generation. International Journal of Hydrogen Energy, 42 (3). pp. 1661-1671. ISSN 0360-3199

Kang, Y.L. and Poon, M.Y. and Monash, P. and Ibrahim, S. and Saravanan, P. (2013) Surface chemistry and adsorption mechanism of cadmium ion on activated carbon derived from Garcinia mangostana shell. Korean Journal of Chemical Engineering, 30 (10). pp. 1904-1910. ISSN 0256-1115

Kang, Y.L. and Toh, S.K.S. and Monash, P. and Ibrahim, S. and Saravanan, P. (2013) Adsorption isotherm, kinetic and thermodynamic studies of activated carbon prepared from Garcinia mangostana shell. Asia-Pacific Journal of Chemical Engineering, 8 (6). pp. 811-818. ISSN 1932-2135

Kardooni, Roozbeh and Yusoff, Sumiani and Kari, Fatimah and Moeenizadeh, Leila (2018) Public opinion on renewable energy technologies and climate change in Peninsular Malaysia. Renewable Energy, 116. pp. 659-668. ISSN 0960-1481

Karim, M.E. (2015) Too enthusiastic to care for safety: Present status and recent developments of nanosafety in ASEAN countries. Technological Forecasting & Social Change, 92. pp. 168-181. ISSN 0040-1625

Karim, M.R. (2013) Behaviour of piles subjected to passive subsoil movement due to embankment construction - a simplified 3D analysis. Computers and Geotechnics, 53. pp. 1-8. ISSN 0266-352X

Karim, M.R. (1987) Delay-throughput and buffer utilization characteristics of some statistical multiplexers. AT&T Technical Journal, 66 (2). pp. 55-69. ISSN 8756-2324

Karim, M.R. (1982) Investigation of delta modulation of speech for mobile radio. IEEE Transactions on Vehicular Technology, 31 (4). pp. 158-165. ISSN 0018-9545

Karim, M.R. (1986) Packet communications on a mobile radio channel. AT&T Technical Journal, 65 (3). pp. 12-20. ISSN 8756-2324

Karim, M.R. (1994) Packetizing voice for mobile radio. IEEE Transactions on Communications, 42 (2-4). pp. 377-385.

Karim, M.R. (1982) Transmission of digital data over a rayleigh fading channel. IEEE Transactions on Vehicular Technology, 31 (1). pp. 1-6. ISSN 0018-9545

Karim, M.R. and Ali, S.T. and Bodruzzaman, M. (2000) Relativistic windowed Fourier transform. In: IEEE SoutheastCon 2000 'Preparing for the New Millennium, 2000, Nashville, TN, USA.

Karim, M.R. and Gnanendran, C.T. (2009) Settlement analysis of foundation soil over a long time and comparison with field performance. In: 17th International Conference on Soil Mechanics and Geotechnical Engineering, ICSMGE 2009, 2009, Alexandria.

Karim, M.R. and Gnanendran, C.T. and Lo, S.C.R. (2012) Effect of geosynthetic reinforcement creep on the long term performance of an embankment. In: GeoCongress 2012: State of the Art and Practice in Geotechnical Engineering, 2012, Oakland, CA.

Karim, M.R. and Gnanendran, C.T. and Lo, S.C.R. and Mak, J. (2010) Predicting the long-term performance of a wide embankment on soft soil using an elastic-viscoplastic model. Canadian Geotechnical Journal, 47 (2). pp. 244-257. ISSN 0008-3674

Karim, M.R. and Hashim, H. and Abdul Razak, H. (2016) Assessment of pozzolanic activity of palm oil clinker powder. Construction and Building Materials, 127. pp. 335-343. ISSN 0950-0618

Karim, M.R. and Ibrahim, N.I. and Saifizul, A.A. and Yamanaka, H. (2013) Effectiveness of vehicle weight enforcement in a developing country using weigh-in-motion sorting system considering vehicle by-pass and enforcement capability. IATSS Research. pp. 1-7. ISSN rehan@um.edu.my

Karim, M.R. and Krabbenhoft, K. (2010) Extraction of effective cement paste diffusivities from X-ray microtomography scans. Transport in Porous Media, 84 (2). pp. 371-388. ISSN 0169-3913

Karim, M.R. and Krabbenhoft, K. (2010) New renormalization schemes for conductivity upscaling in heterogeneous media. Transport in Porous Media, 85 (3). pp. 677-690. ISSN 0169-3913

Karim, M.R. and Manivannan, G. and Gnanendran, C.T. and Lo, S.C.R. (2011) Predicting the long-term performance of a geogrid-reinforced embankment on soft soil using two-dimensional finite element analysis. Canadian Geotechnical Journal, 48 (5). pp. 741-753. ISSN 00083674

Karim, M.R. and Nogami, T. and Wang, J.G. (2002) Analysis of transient response of saturated porous elastic soil under cyclic loading using element-free Galerkin method. International Journal of Solids and Structures, 39 (24). pp. 6011-6033. ISSN 0020-7683

Karim, M.R. and Oka, F. (2010) An automatic time increment selection scheme for simulation of elasto-viscoplastic consolidation of clayey soils. Geomechanics and Geoengineering, 5 (3). pp. 153-177. ISSN 1748-6025

Karim, M.R. and Oka, F. and Krabbenhoft, K. and Leroueil, S. and Kimoto, S. (2013) Simulation of long-term consolidation behavior of soft sensitive clay using an elasto-viscoplastic constitutive model. International Journal for Numerical and Analytical Methods in Geomechanics, 37 (16). pp. 2801-2824. ISSN 0363-9061

Karim, M.R. and SaifizuI, A.A. and Yamanaka, H. (2014) The effect of gross vehicle weight on platoon speed and size characteristics on two-lane road. In: International Conference on Innovative Trends in Multidisciplinary Academic Research, 20 – 21 October 2014, Istanbul, Turkey.

Karim, M.R. and Wei, S. (2007) Antenna arrays in multi-user detection of spread spectrum signals. In: Department of Civil Engineering, Faculty of Engineering Building, University of Malaya, 50603 Kuala Lumpur, MALAYSIA, 2007, Orlando, FL.

Karim, Mohamed Rehan and Dehghani, A. (2010) Vehicle speed detection in video image sequences using CVS method. International Journal of the Physical Sciences, 5 (17). pp. 2555-2563. ISSN 1992-1950

Karim, Mohammad Razaul and Yusoff, Sumiani and Razak, Hashim Abdul and Chowdhury, Faisal Islam and Zabed, Hossain (2018) Heavy Metals Leaching Behaviour Assessment of Palm Oil Clinker. Sains Malaysiana, 47 (3). pp. 523-530. ISSN 0126-6039

Karimi, M. and Mohamad, H. and Mokhlis, H. and Bakar, A.H.A. (2012) Under-Frequency Load Shedding scheme for islanded distribution network connected with mini hydro. International Journal of Electrical Power & Energy Systems, 42 (1). pp. 127-138. ISSN 0142-0615

Karimi, M. and Mohamad, H. and Mokhlis, H. and Bakar, A.H.A. (2012) A new approach of under-frequency load shedding technique in an islanded distribution network. International Review of Electrical Engineering, 7 (2). pp. 4155-4162. ISSN 18276660

Karimi, M. and Mokhlis, H. and Bakar, A.H.A. and Laghari, J.A. and Shahriari, A. and Aman, M.M. (2012) Combination of adaptive and intelligent load shedding techniques for distribution network. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Karimi, M. and Mokhlis, H. and Bakar, A.H.A. and Shahriari, A. (2013) Distribution state estimation for smart distribution system. In: POWERTECH Grenoble, 16-20 June 2013, France.

Karimi, M. and Mokhlis, H. and Bakar, A.H.A. and Shahriari, A. and Faradonbeh, M.A. and Rosli, H.M. (2012) Impact of load modeling in distribution state estimation. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Karimi, M. and Mokhlis, H. and Bakar, A.H.A. and Shahriari, A. and Kazeminejad, M. (2012) Distribution state estimation incorporating load modelling. Przeglad Elektrotechniczny, 88 (11 A). pp. 166-169. ISSN 00332097

Karman, S. and Hasikin, K. and Ting, H.N. and Ng, S.C. and Abdul Wahab, A.K. and Lim, E. and Hamzaid, N.A. and Wan Abas, Wan Abu Bakar (2011) OBE implementation and design of continual quality improvement (CQI) for accreditation of biomedical engineering program University of Malaya. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Kashani, M.M. and Lai, S.H. and Ibrahim, S. and Birgani, P.M. (2016) Design factors affecting the dynamic performance of soil suspension in an agitated, baffled tank. Chinese Journal of Chemical Engineering, 24 (12). pp. 1664-1673. ISSN 1004-9541

Kashani, M.M. and Lai, S.H. and Ibrahim, S. and Sulaiman, N.M.N. (2016) A Study on Hydrodynamic Behavior of Fine Sediment in Retention Structure Using Particle Image Velocimetry. Water Environment Research, 88 (12). pp. 2309-2320. ISSN 1061-4303

Kashani, M.M. and Lai, S.H. and Ibrahim, S. and Sulaiman, N.M.N. and Fang, Y.T. (2016) An investigation into the effects of particle texture, water content and parallel plates׳ diameters on rheological behavior of fine sediment. International Journal of Sediment Research, 31 (2). pp. 120-130. ISSN 1001-6279

Kashani, M.M. and Lai, S.H. and Ibrahim, S. and Sulaiman, N.M.N. and Teo, F.Y. (2016) Tracking the hydrodynamic behavior of fine sediment using particle image velocimetry. Environmental Earth Sciences, 75 (8). pp. 1-13. ISSN 1866-6280

Kashem, M.A. and Jasmon, G.B. and Mohamed, A. and Moghavvemi, M. (1998) Artificial neural network approach to network reconfiguration for loss minimization in distribution networks. International Journal of Electrical Power & Energy Systems, 20 (4). pp. 247-258. ISSN 0142-0615

Kashem, M.A. and Moghavvemi, M. (1998) Maximizing radial voltage stability and load balancing via loss minimization in distribution networks. In: Proceedings of the 1998 2nd International Conference on Energy Management and Power Delivery (EMPD'98), 3 - 5 March 1998, Singapore.

Kashem, M.A. and Moghavvemi, M. and Mohamed, A. and Jasmon, G.B. (1996) Loss reduction in distribution networks using new network reconfiguration algorithm. Electric Machines and Power Systems, 26 (8). pp. 815-829. ISSN 0731-356X

Kasim, Nabilah and Latiff, Anas Abdul and Rusdi, Muhammad Farid Mohd and Hisham, M.B. and Harun, Sulaiman Wadi and Razak, Nor Farhah (2018) Short-pulsed Q-switched Thulium doped fiber laser with graphene oxide as a saturable absorber. Optik, 168. pp. 462-466. ISSN 0030-4026

Kasman, M. and Ibrahim, S. (2010) Application of response surface methodology in optimization of cadmium adsorption by raw rice husk. In: 2010 International Conference on Environmental and Agriculture Engineering, ICEAE 2010, 2010, Kyoto.

Katman, H.Y. and Ibrahim, M.R. and Karim, M.R. and Koting, S. and Mashaan, N.S. (2016) Effect of Rubberized Bitumen Blending Methods on Permanent Deformation of SMA Rubberized Asphalt Mixtures. Advances in Materials Science and Engineering, 2016. pp. 1-14. ISSN 1687-8434

Katman, Herda Yati and Ibrahim, Mohd Rasdan and Norhisham, Shuhairy and Ismail, Norlela and Rahman, Noorhazlinda Abd (2018) Creep-recovery behaviour of crumb rubber modified bitumen (CRMB) containing trans-polyoctenamer. International Journal of Engineering Research and Technology, 11 (12). pp. 2073-2088. ISSN 0974-3154

Kaur, W. and Vimala, B. (2016) Sentiment analysis technique: A look into support vector machine and naive bayes. In: International Conference on IT, Mechanical & Communication Engineering (ICIME 2016), 02-03 January 2016, Pattaya, Thailand.

Kaviani, S. and Hassanli, A.M. and Homayounfar, M. (2015) Optimal crop water allocation based on constraint-state method and nonnormal stochastic variable. Water Resources Management, 29 (4). pp. 1003-1018. ISSN 0920-4741

Kazemzadeh, A. and Ganesan, P. and Ibrahim, F. and He, S. and Madou, M.J. (2013) The effect of contact angles and capillary dimensions on the burst frequency of super hydrophilic and hydrophilic centrifugal microfluidic platforms, a CFD study. PLoS ONE, 8 (9). pp. 1-12. ISSN 19326203

Kazemzadeh, A. and Ganesan, P. and Ibrahim, F. and Kulinsky, L. and Madou, M.J. (2015) Guided routing on spinning microfluidic platforms. RSC Advances, 5 (12). pp. 8669-8679. ISSN 2046-2069

Keshtegar, Behrooz and Baharom, Shahrizan and El-Shafie, Ahmed (2018) Self-adaptive conjugate method for a robust and efficient performance measure approach for reliability-based design optimization. Engineering with Computers, 34 (1). pp. 187-202. ISSN 0177-0667

Khalaj-Amirhosseini, M. and Moghavvemi, M. and Attaran, A. (2011) A triangular Wilkinson power divider with spaced output ports. Iranian Journal of Electrical and Electronic Engineering, 7 (4). 213-216. ISSN 17352827

Khaleel, O.R. and Abdul Razak, H. (2014) Mix design method for self compacting metakaolin concrete with different properties of coarse aggregate. Materials & Design, 53. pp. 691-700. ISSN 0261-3069

Khaleel, O.R. and Abdul Razak, H. (2012) The effect of powder type on the setting time and self compactability of mortar. Construction and Building Materials, 36. pp. 20-26. ISSN 0950-0618

Khaleel, O.R. and Al-Mishhadani, S.A. and Abdul Razak, H. (2011) The effect of coarse aggregate on fresh and hardened properties of self-compacting concrete (SCC). In: 12th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC12, 2011, Hong Kong.

Khalid, A.R. and Mokhlis, Hazlie and Li, H. (2006) Fault section detection and location on distribution network using analytical voltage sags database. In: 2006 China International Conference on Electricity Distribution (CICED 2006), 2006.

Khaligh, Nader Ghaffari (2018) Synthesis and characterization of some novel 4-arylglyoxal-chromene derivatives in the presence of a polymeric catalyst and biological evaluation against Escherichia coli. Monatshefte fur Chemie - Chemical Monthly, 149 (1). pp. 33-38. ISSN 0026-9247

Khaligh, Nader Ghaffari and Chong, Kim Foong and Mihankhah, Taraneh and Titinchi, Salam and Johan, Mohd Rafie and Juan, Joon Ching (2018) An Efficient Synthesis of Pyrrolidinone Derivatives in the Presence of 1,1′-Butylenebis(3-sulfo-3H-imidazol-1-ium) Chloride. Australian Journal of Chemistry, 71 (8). pp. 566-572. ISSN 0004-9425

Khaligh, Nader Ghaffari and Johan, Mohd Rafie and Juan, Joon Ching (2018) Saccharin and tert-Butyl Nitrite: Cheap and Efficient Reagents for the Synthesis of 1,2,3-Benzotriazine-4-(3H)-ones from 2-Aminobenzamides under Metal-Free Conditions. Australian Journal of Chemistry, 71 (3). pp. 186-189. ISSN 0004-9425

Khaligh, Nader Ghaffari and Mihankhah, Taraneh and Johan, Mohd Rafie (2018) Efficient chemical fixation of CO2 into cyclic carbonates using poly(4-vinylpyridine) supported iodine as an eco-friendly and reusable heterogeneous catalyst. Heteroatom Chemistry, 29 (4). e21440. ISSN 1042-7163

Khaligh, Nader Ghaffari and Mihankhah, Taraneh and Johan, Mohd Rafie and Juan, Joon Ching (2018) Saccharin: an efficient organocatalyst for the one-pot synthesis of 4-amidocinnolines under metal and halogen-free conditions. Monatshefte fur Chemie - Chemical Monthly, 149 (6). pp. 1083-1087. ISSN 0026-9247

Khaligh, Nader Ghaffari and Mihankhah, Taraneh and Johan, Mohd Rafie and Juan, Joon Ching (2018) Two novel binuclear sulfonic-functionalized ionic liquids: Influence of anion and carbon-spacer on catalytic efficiency for one-pot synthesis of bis(indolyl)methanes. Journal of Molecular Liquids, 259. pp. 260-273. ISSN 0167-7322

Khalil, Ibrahim and Rahmati, Shahrooz and Julkapli, Nurhidayatullaili Muhd and Yehye, Wageeh Abdulhadi (2018) Graphene metal nanocomposites — Recent progress in electrochemical biosensing applications. Journal of Industrial and Engineering Chemistry, 59. pp. 425-439. ISSN 1226-086X

Khalil, M. and Jan, B.M. and Abdul Aziz, A.R. (2013) A tait-like equation for estimating the density of nontraditional super lightweight completion fluid at high pressure and temperature. Petroleum Science and Technology. pp. 44-50. ISSN 1091-6466

Khalil, M. and Jan, B.M. and Abdul Raman, A.A. (2010) Fractional factorial design optimization of nontraditional completion fluid for perforation with underbalance. Chemistry and Technology of Fuels and Oils, 46 (5). pp. 340-350. ISSN 0009-3092

Khalil, M. and Jan, B.M. and Abdul Raman, A.A. (2011) Rheological and statistical evaluation of nontraditional lightweight completion fluid and its dependence on temperature. Journal of Petroleum Science and Engineering, 77 (1). pp. 27-33. ISSN 0920-4105

Khalil, M. and Jan, B.M. and Abdul Raman, A.A. (2012) The viscosity of nontraditional lightweight completion fluid at elevated temperature and pressure. Petroleum Science and Technology. pp. 1939-1945. ISSN 1091-6466

Khalil, M. and Mohamed Jan, B. (2012) Viscoplastic Modeling of a Novel Lightweight Biopolymer Drilling Fluid for Underbalanced Drilling. Industrial and Engineering Chemistry Research, 51 (10). pp. 4056-4068. ISSN 0888-5885

Khalil, S.H. and Aroua, M.K. and Daud, W.M.A.W. (2012) Study on the improvement of the capacity of amine-impregnated commercial activated carbon beds for Co-2 adsorbing. Chemical Engineering Journal, 183. pp. 15-20. ISSN 1385-8947

Khalilnejad, A. and Ali, F.H. and Hashim, Roslan and Osman, N. (2013) Finite-element simulation for contribution of matric suction and friction angle to stress distribution during pulling-Out process. International Journal of Geomechanics, 13 (5). pp. 527-532. ISSN 1532-3641

Khan, G. and Basirun, Wan Jefrey and Kazi, S.N. and Ahmed, P. and Magaji, L. and Ahmed, S.M. and Khan, G.M. and Rehman, M.A. (2017) Electrochemical investigation on the corrosion inhibition of mild steel by Quinazoline Schiff base compounds in hydrochloric acid solution. Journal of Colloid and Interface Science, 502. pp. 134-145. ISSN 0021-9797

Khan, M.I. and Yasmin, T. and Khan, N.B. (2016) Safety issues associated with the use and operation of natural gas vehicles: learning from accidents in Pakistan. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 38 (8). pp. 2481-2497. ISSN 1678-5878

Khan, M.M. and Ramesh, S. and Bang, L.T. and Wong, Y.H. and Ubenthiran, S. and Tan, C.Y. and Purbolaksono, J. and Misran, H. (2014) Effect of Copper Oxide and Manganese Oxide on Properties and Low Temperature Degradation of Sintered Y-TZP Ceramic. Journal of Materials Engineering and Performance, 23 (12). pp. 4328-4335. ISSN 1059-9495

Khan, M.N. and Yusoff, R. (2001) Effects of inert organic and inorganic anions on the rates of intramolecular general base-catalyzed reactions of ionized phenyl salicylate (PS-) with piperidine in the presence of cationic micelles. Journal of Physical Organic Chemistry, 14 (2). pp. 74-80. ISSN 0894-3230

Khan, Md Munir Hayet and Muhammad, Nur Shazwani and El-Shafie, Ahmed (2018) Wavelet-ANN versus ANN-Based Model for Hydrometeorological Drought Forecasting. Water, 10 (8). p. 998. ISSN 2073-4441

Khan, N.A. and Ibrahim, S. and Subramaniam, P. (2004) Elimination of Heavy Metals from Wastewater Using Agricultural Wastes as Adsorbents. Malaysian Journal of Science, 23 (1). pp. 43-51. ISSN 1394-3065

Khan, N.B. and Ibrahim, Z. and Nguyen, L.T.T. and Javed, M.F. and Jameel, M. (2017) Numerical investigation of the vortex-induced vibration of an elastically mounted circular cylinder at high Reynolds number (Re = 104) and low mass ratio using the RANS code. PLoS ONE, 12 (10). e0185832. ISSN 1932-6203

Khan, Niaz Bahadur and Ibrahim, Zainah and Khan, Muhammad Ijaz and Hayat, Tasawar and Javed, Muhammad Faisal (2018) VIV study of an elastically mounted cylinder having low mass-damping ratio using RANS model. International Journal of Heat and Mass Transfer, 121. pp. 309-314. ISSN 0017-9310

Khan, S.A. and Rahim, N.A. and Bakar, A.H.A. and Tan, C.K. (2015) Single-Phase Bridgeless Zeta PFC Converter with Reduced Conduction Losses. Journal of Power Electronics, 15 (2). pp. 356-365. ISSN 1598-2092

Khanis, N.H. and Ritikos, R. and Chiu, W.S. and Haw, C.Y. and Rashid, N.M.A. and Chia, M.Y. and Khiew, P.S. and Rahman, S.A. (2017) SnO2 Nanoparticles Decorated 2D Wavy Hierarchical Carbon Nanowalls with Enhanced Photoelectrochemical Performance. Journal of Nanomaterials, 2017. pp. 1-11. ISSN 1687-4110

Khiar, A.S.A. and Arof, Abdul Kariem (2009) Impedance studies of proton conducting plasticized polymer electrolyte based on starch. In: National Workshop on Functional Materials 2009, 16 June 2009, Centre For Ionics, University of Malaya.

Kho, F.W.L. and Law, P.L. and Ibrahim, S.H. and Sentian, J. (2007) Carbon monoxide levels along roadway. International Journal of Environmental Science and Technology, 4 (1). pp. 27-34. ISSN 1735-1472

Khoo, S.Y. and Radeef, Z.S. and Ong, Z.C. and Huang, Y.H. and Chong, W.T. and Ismail, Z. (2017) Structural dynamics effect on voltage generation from dual coupled cantilever based piezoelectric vibration energy harvester system. Measurement, 107. pp. 41-52. ISSN 0263-2241

Khoo, Shin Yee and Lian, Yee Cheng and Ong, Zhi Chao and Ismail, Zubaidah and Noroozi, Siamak (2018) Time effective structural frequency response testing with oblique impact. In: ICAVNCE 2018 : 20th International Conference on Acoustics, Vibration and Noise Control Engineering, 21-22 June 2018, Venice, Italy.

Khorasani, M.A. and Abu Osman, Noor Azuan and Yusof, A. (2009) Biomechanical responds of instep kick between different positions in professional soccer players. Journal of Human Kinetics, 22. pp. 21-27. ISSN 1640-5544

Kien, W.K and Rozita, Y. and Abdul Aziz, A.R. and Abdullah, E.C. (2013) Synthesis of carbon-opacified-silica-aerogel using bamboo leaf. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Kim, K. and Cho, E. and Thokchom, B. and Cui, M. and Jang, M. and Khim, J. (2015) Synergistic sonoelectrochemical removal of substituted phenols: Implications of ultrasonic parameters and physicochemical properties. Ultrasonics Sonochemistry, 24. pp. 172-177. ISSN 1350-4177

Kim, T.H. and Jang, M. and Park, J.K. (2008) Bifunctionalized mesoporous molecular sieve for perchlorate removal. Microporous and Mesoporous Materials, 108 (1-3). pp. 22-28. ISSN 1387-1811

Kittisupakorn, P. and Hussain, M.A. (2000) Comparison sf optimisation based control techniques for the control of a CSTR. International Journal of Computer Applications in Technology, 13 (3-5). pp. 178-184. ISSN 0952-8091

Kittisupakorn, P. and Hussain, M.A. (2000) Model predictive control for the reactant concentration control of a reactor. Korean Journal of Chemical Engineering, 17 (3). pp. 368-372. ISSN 0256-1115

Kittisupakorn, P. and Thitiyasook, P. and Hussain, M.A. and Daosud, W. (2009) Neural network based model predictive control for a steel pickling process. Journal of Process Control, 19 (4). pp. 579-590. ISSN 0959-1524

Klimenkov, Michael and Haseeb, A.S. Md. Abdul and Bade, Klaus (2009) Structural investigations on nanocrystalline Ni-W alloy films by transmission electron microscopy. Thin Solid Films, 517 (24). pp. 6593-6598. ISSN 0040-6090

Kobraei, M. and Jumaat, M.Z. and Shafigh, P. (2011) An experimental study on shear reinforcement in RC beams using CFRP-bars. Scientific Research and Essays, 6 (16). pp. 3447-3460. ISSN 19922248

Kong, P.S. and Aroua, M.K. and Ir, A.A.R. (2011) Kinetics study of Esterification Reaction of 2-Methyl-4-Chlorophenoxyacetic acid (MCPA Acid). International Journal of Chemical Reactor Engineering, 9. ISSN 1542-6580

Koting, S. and Karim, M.R. and Mahmud, H. and Abdul Hamid, N.A. (2011) Development of cement-bitumen composites for semi-flexible pavement surfacing. In: Proceedings of the Eastern Asia Society for Transportation Studies, 20-23 Jun 2011, Jeju, Korea.

Kow, K.W. and Abdullah, E.C. and Aziz, A.R. (2009) Effects of ultrasound in coating nano-precipitated CaCO3 with stearic acid. Asia-Pacific Journal of Chemical Engineering, 4 (5). pp. 807-813. ISSN 1932-2143

Krabbenhoft, K. and Karim, M.R. and Lyamin, A.V. and Sloan, S.W. (2012) Associated computational plasticity schemes for nonassociated frictional materials. International Journal for Numerical Methods in Engineering, 90 (9). pp. 1089-1117. ISSN 0029-5981

Krishnan, S. and Haseeb, A.S. Md. Abdul and Johan, M.R. (2012) Preparation and low-temperature sintering of cu nanoparticles for high-power devices. IEEE Transactions on Components, Packaging, and Manufacturing Technology, 2 (4). pp. 587-592. ISSN 2156-3950

Krishnan, S. and Haseeb, A.S. Md. Abdul and Johan, M.R. (2013) Synthesis and growth kinetics of spindly CuO nanocrystals via pulsed wire explosion in liquid medium. Journal of Nanoparticle Research, 15 (1410). pp. 1-9. ISSN 1388-0764

Ku, P.X. and Abu Osman, Noor Azuan and Wan Abas, W.A.B. (2014) Balance control in lower extremity amputees during quiet standing: a systematic review. Gait and Posture, 39 (2). pp. 672-682. ISSN 09666362

Ku, P.X. and Abu Osman, Noor Azuan and Wan Abas, W.A.B. (2016) The limits of stability and muscle activity in middle-aged adults during static and dynamic stance. Journal of Biomechanics, 49 (16). pp. 3943-3948. ISSN 0021-9290

Ku, P.X. and Abu Osman, Noor Azuan and Yusof, A. and Wan Abas, Wan Abu Bakar (2012) Biomechanical evaluation of the relationship between postural control and body mass index. Journal of Biomechanics, 45 (9). pp. 1638-1642. ISSN 0021-9290

Ku, P.X. and Abu Osman, Noor Azuan and Yusof, A. and Wan Abas, Wan Abu Bakar (2012) Biomechanical evaluation of the relationship between postural control and body mass index. Journal of Biomechanics, 45 (9). pp. 1638-1642. ISSN 0021-9290

Kubba, H. and Mokhlis, H. (2012) An enhanced RCGA for a rapid and reliable load flow solution of electrical power systems. International Journal of Electrical Power & Energy Systems, 43 (1). pp. 304-312. ISSN 0142-0615

Kundu, A. and Sen Gupta, B. and Hashim, M.A. and Sahu, J.N. and Mujaware, M. and Redzwan, G. (2015) Optimisation of the process variables in production of activated carbon by microwave heating. RSC Advances, 5 (45). pp. 35899-35908. ISSN 2046-2069

Kundu, A. and SenGupta, B. and Hashim, M.A. and Redzwan, G. (2015) Taguchi optimisation approach for chromium removal in a rotating packed bed contractor. Journal of the Taiwan Institute of Chemical Engineers, 57. pp. 91-97. ISSN 1876-1070

Kurniawan, T. and Wong, Y.H. and Cheong, K.Y. and Moon, J.H. and Bahng, W. and Razak, K.A. and Lockman, Z. and Kim, H.J. and Kim, N.K. (2011) Effects of post- oxidation annealing temperature on ZrO2 thin film deposited on 4H-SiC substrate. Materials Science in Semiconductor Processing, 14 (1). pp. 13-17. ISSN 1369-8001

Kuttisupakorn, P. and Hussain, M.A. and Petcherdask, J. (2001) Studies on the use of neural networks in nonlinear control strategies. Journal of Chemical Engineering of Japan, 34 (4). pp. 453-465. ISSN 0021-9592

Kwon, H.H. and Shim, Y.S. and Lee, J. and Jang, M. and Kim, K. (2011) Preface: a special issue on mine reclamation and suitable management for heavy metals. Environmental Geochemistry and Health, 33 (SUPPL.). pp. 1-2. ISSN 0269-4042

L

Laghari, J. and Mokhlis, H. and Bakar, A.B.A. and Mohammad, H. (2011) Comparative studies on load frequency control for islanded distribution network connected with mini hydro. In: Power Engineering and Optimization Conference (PEOCO), 2011 5th International, 2011, Shah Alam, Selangor (Malaysia).

Laghari, J. and Mokhlis, H. and Bakar, A.B.H.A. and Mohammad, H. (2011) Comparative studies on load frequency control for islanded distribution network connected with mini hydro. In: Power Engineering and Optimization Conference (PEOCO), 2011 5th International, 2011, Selangor, Malaysia.

Laghari, J.A. and Mokhlis, H. and Bakar, A.H.A. and Karimi, M. and Mohammad, H. (2013) Comparison of fuzzy and PID based governor's response in utilization of DG spinning reserve. Electrical review przeglad elektrotechniczny, 89 (2 A). pp. 187-190. ISSN 00332097

Laghari, J.A. and Mokhlis, H. and Bakar, A.H.A. and Karimi, M. and Mohammad, H. (2013) Comparison of fuzzy and PID based governor’s response in utilization of DG spinning reserve. Przegląd Elektrotechniczny, 89. pp. 187-190. ISSN 0033-2097

Laghari, J.A. and Mokhlis, H. and Bakar, A.H.A. and Mohammad, H. (2013) A comprehensive overview of new designs in the hydraulic, electrical equipments and controllers of mini hydro power plants making it cost effective technology. Renewable and Sustainable Energy Reviews, 20. pp. 279-293. ISSN 13640321

Laghari, J.A. and Mokhlis, H. and Halim Abu Bakar, A.B. and Karimi, M. and Shahriari, A. (2012) An intelligent under frequency load shedding scheme for islanded distribution network. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Laghari, J.A. and Mokhlis, H. and Karimi, M. and Bakar, A.H.A. and Mohamad, H. (2014) Computational Intelligence based techniques for islanding detection of distributed generation in distribution network: A review. Energy Conversion and Management, 88. pp. 139-152. ISSN 0196-8904

Laghari, J.A. and Mokhlis, H. and Karimi, M. and Bakar, A.H.A. and Mohamad, H. (2015) An islanding detection strategy for distribution network connected with hybrid DG resources. Renewable & Sustainable Energy Reviews, 45. pp. 662-676. ISSN 1364-0321

Lai, Chin Wei and Lau, Kung Shiuh and Chou, Pui May (2019) CdSe/TiO2 nanotubes for enhanced photoelectrochemical activity under solar illumination: Influence of soaking time in CdSe bath solution. Chemical Physics Letters, 714. pp. 6-10. ISSN 0009-2614

Lai, Chin Wei and Lau, Kung Shiuh and Samad, Nur Azimah Abd and Chou, Pui May (2018) CdSe Species Decorated TiO2 Nanotubes Film Via Chemical Bath Deposition for Enhancing Photoelectrochemical Water Splitting Performance. Current Nanoscience, 14 (2). pp. 148-153. ISSN 1573-4137

Lai, V. and Ahmed, Ali Najah and Malek, Marlinda Abdul and El-Shafie, Ahmed and El-Shafie, Amr (2018) Evolutionary algorithm for forecastng mean sea level based on meta-heuristic approach. International Journal of Civil Engineering and Technology, 9 (11). pp. 1404-1413. ISSN 0976-6308

Lam, W.H. and Chen, L. and Hashim, Roslan (2015) Analytical wake model of tidal current turbine. Energy, 79. pp. 512-521. ISSN 0360-5442

Laouar, L. and Hamadache, H. and Saad, S. and Bouchelaghem, A. and Mekhilef, S. (2009) Mechanical surface treatment of steel-optimization parameters of regime. Proceedings of the Jmsm 2008 Conference, 2 (3). pp. 1213-1221. ISSN 18753884

Larsson, H.M. and Vythilingam, G. and Pinnagoda, K. and Vardar, E. and Engelhardt, E.M. and Sothilingam, S. and Thambidorai, R.C. and Kamarul, Tunku and Hubbell, J.A. and Frey, P. (2018) Fiber density of collagen grafts impacts rabbit urethral regeneration. Scientific Reports, 8 (1). pp. 1-8. ISSN 2045-2322

Latiff, Anas Abdul and Shamsudin, Hanafiah and Aziz, Nur Suhaili Abd and Hashim, Abdul Manaf and Irawati, Ninik and Ahmad, Harith and Harun, Sulaiman Wadi (2016) Mode-locked generation in thulium-doped fiber linear cavity laser. Optik, 127 (23). pp. 11119-11123. ISSN 0030-4026

Lau, C.K. and Ghosh, K. and Hussain, M.A. and Hassan, C.R.C. (2013) Fault diagnosis of Tennessee Eastman process with multi-scale PCA and ANFIS. Chemometrics and Intelligent Laboratory Systems, 120. pp. 1-14. ISSN 0169-7439

Lau, C.K. and Heng, Y.S. and Hussain, M.A. and Mohamad Nor, M.I. (2010) Fault diagnosis of the polypropylene production process (UNIPOL PP) using ANFIS. ISA Trans, 49 (4). pp. 559-566. ISSN 1879-2022

Law, K.H. and Othman, S.Z. and Hashim, Roslan and Ismail, Z. (2014) Determination of soil stiffness parameters at a deep excavation construction site in Kenny Hill Formation. Measurement: Journal of the International Measurement Confederation, 47 (1). pp. 645-650. ISSN 02632241

Lee, Ang Wee and Ghasem, Nayef Mohamed and Hussain, Mohamed Azlan (2005) Utilization of mathematical software packages in chemical engineering research. ASEAN Journal of Chemical Engineering, 5 (2). pp. 125-129. ISSN 1655-4418

Lee, B.T. and Ranville, J.F. and Wildeman, T.R. and Jang, M. and Shim, Y.S. and Ji, W.H. and Park, H.S. and Lee, H.J. (2012) Assessment of Young Dong tributary and Imgok Creek impacted by Young Dong coal mine, South Korea. Environmental Geochemistry and Health, 34 (SUPPL.). pp. 95-103. ISSN 0269-4042

Lee, C.S. and Ong, Y.L. and Aroua, M.K. and Daud, W.M.A.W. (2013) Impregnation of palm shell-based activated carbon with sterically hindered amines for CO2 adsorption. Chemical Engineering Journal, 219. pp. 558-564. ISSN 1385-8947

Lee, G. and Bae, J. and Lee, S. and Jang, M. and Park, H. (2016) Monthly chlorophyll-a prediction using neuro-genetic algorithm for water quality management in Lakes. Desalination and Water Treatment, 57 (55). pp. 26783-26791. ISSN 1944-3994

Lee, G. and Othman, F. and Ibrahim, S. and Jang, M. (2016) Determination of the forecasting-model parameters by statistical analysis for development of algae warning system. Desalination and Water Treatment, 57 (55). pp. 26773-26782. ISSN 1944-3994

Lee, Gooyong and Ibrahim, Shaliza and Kittappa, Shanmuga and Park, Heekyung and Park, Chang Min (2018) Sonocatalytic activity of a heterostructured β-Bi 2 O 3 /Bi 2 O 2 CO 3 nanoplate in degradation of bisphenol A. Ultrasonics Sonochemistry, 44. pp. 64-72. ISSN 1350-4177

Lee, S.L. and Saidur, R. and Sabri, M.F.M. and Min, T.K. (2015) Molecular dynamic simulation on the thermal conductivity of nanofluids in aggregated and non-aggregated states. Numerical Heat Transfer Part a-Applications, 68 (4). pp. 432-453. ISSN 1040-7782

Lee, Shi Ting and Rahman, Ruman and Muthoosamy, Kasturi and Mohamed, Nur Aliana Hidayah and Su, XiaoDi and Tayyab, Saad and New, Siu Yee (2019) Amplification-free and direct fluorometric determination of telomerase activity in cell lysates using chimeric DNA-templated silver nanoclusters. Microchimica Acta, 186 (2). p. 81. ISSN 0026-3672

Lee, Siew Cheng and Hashim, Roslan and Mo, Kim Hung (2018) The Evaluation of Geotube Behaviors on Muddy Beach: Field Monitoring and Numerical Analysis. KSCE Journal of Civil Engineering, 22 (11). pp. 4185-4193. ISSN 1226-7988

Leong, Chen Onn and Lim, Einly and Tan, Li Kuo and Abdul Aziz, Yang Faridah and Sridhar, Ganiga Srinivasaiah and Socrates, Dokos and Chee, Kok Han and Lee, Zhen Vin and Liew, Yih Miin (2019) Segmentation of left ventricle in late gadolinium enhanced MRI through 2D‐4D registration for infarct localization in 3D patient‐specific left ventricular model. Magnetic Resonance in Medicine, 81 (2). pp. 1385-1398. ISSN 0740-3194

Leong, H.Y. and Yap, B.K. and Navas, K. and Mohd Rusli, I. and Tan, L.C. and Faiz, M. (2013) Development of insulated cu wire stitch bonding. In: 1st International Conference on the Science & Engineering Materials , Sunway Putra Hotel, Kuala lumpur, Malaysia.

Leong, K.H. and Gana, B.L. and Ibrahim, S. and Saravanan, P. (2014) Synthesis of surface plasmon resonance (SPR) triggered Ag/TiO2 photocatalyst for degradation of endocrine disturbing compounds. Applied Surface Science, 319. pp. 128-135. ISSN 0169-4332

Leong, K.H. and Monash, P. and Ibrahim, S. and Saravanan, P. (2014) Solar photocatalytic activity of anatase TiO2 nanocrystals synthesized by non-hydrolitic sol–gel method. Solar Energy, 101. pp. 321-332. ISSN 0038-092X

Leong, K.Y. and Saidur, R. and Kazi, S.N. and Mamun, A.H. (2010) Performance investigation of an automotive car radiator operated with nanofluid-based coolants (nanofluid as a coolant in a radiator). Applied Thermal Engineering, 30 (17-18). pp. 2685-2692. ISSN 1359-4311

Leong, K.Y. and Saidur, R. and Khairulmaini, M. and Michael, Z. and Kamyar, A. (2012) Heat transfer and entropy analysis of three different types of heat exchangers operated with nanofluids. International Communications in Heat and Mass Transfer, 39 (6). pp. 838-843. ISSN 0735-1933

Leong, K.Y. and Saidur, R. and Mahlia, T.M.I. and Yau, Y.H. (2012) Entropy generation analysis of nanofluid flow in a circular tube subjected to constant wall temperature. International Communications in Heat and Mass Transfer, 39 (8). pp. 1169-1175. ISSN 0735-1933

Leong, K.Y. and Saidur, R. and Mahlia, T.M.I. and Yau, Y.H. (2012) Performance investigation of nanofluids as working fluid in a thermosyphon air preheater. International Communications in Heat and Mass Transfer, 39 (4). pp. 523-529. ISSN 07351933

Leong, K.Y. and Saidur, Rahman and Mahlia, T.M.I. and Yau, Y.H. (2012) Modeling of shell and tube heat recovery exchanger operated with nanofluid based coolants. International Journal of Heat and Mass Transfer, 55 (4). pp. 808-816. ISSN 0017-9310

Leong, W.C. and Tho, S.Y. and Law, A.W.P. and Chong, W.Y. and Pua, C.H. and Ahmad, Harith and Haseeb, A.S. Md. Abdul and Adikan, Faisal Rafiq Mahamd (2009) Spreading profile of dopant solution on pre-sintered silica layers for selective area doping of integrated optic planar glass samples. Thin Solid Films, 518 (1). pp. 378-382. ISSN 0040-6090

Leow, R.S. and Ibrahim, F. and Moghavvemi, M. (2007) Development of a steady state visual evoked potential (SSVEP)-based brain computer interface (BCI) system. In: 2007 International Conference on Intelligent and Advanced Systems, ICIAS 2007, 2007, Kuala Lumpur.

Leow, R.S. and Moghavvemi, M. and Ibrahim, F. (2010) An efficient low-cost real-time brain computer interface system based on SSVEP. IEICE Electronics Express, 7 (5). pp. 326-331. ISSN 1349-2543

Liaquat, A.M. and Kalam, M.A. and Masjuki, Haji Hassan and Rezza, A. (2010) Emission characteristics of using different alternative fuels with petroleum diesel in a compression ignition (ci) engine. In: International Conference on Applied Energy (ICAE 2010), 21-23 Apr 2010, Singapore.

Liew, W.S. and Seera, M. and Loo, C.K. and Lim, E. (2015) Affect classification using genetic-optimized ensembles of fuzzy ARTMAPs. Applied Soft Computing, 27. pp. 53-63. ISSN 1568-4946

Liew, Y.M. and McLaughlin, R.A. and Chan, B.T. and Aziz, Y.F.A. and Chee, K.H. and Ung, N.M. and Tan, L.K. and Lai, K.W. and Ng, S. and Lim, E. (2015) Motion corrected LV quantification based on 3D modelling for improved functional assessment in cardiac MRI. Physics in Medicine and Biology, 60 (7). pp. 2715-2733. ISSN 0031-9155

Liew Abdullah, A.G. and Sulaiman, N.M. and Aroua, M.K. and Megat Mohd Noor, M.J. (2007) Response surface optimization of conditions for clarification of carambola fruit juice using a commercial enzyme. Journal of Food Engineering, 81 (1). pp. 65-71. ISSN 0260-8774

Lim, Hong Cheet and Ong, Zhi Chao and Ismail, Zubaidah and Khoo, Shin Yee (2018) A Performance Study of Controlled Impact Timing on Harmonics Reduction in Operational Modal Testing. Journal of Dynamic Systems, Measurement, and Control, 141 (3). 034501. ISSN 0022-0434

Lim, J.S. and Hussain, M.A. and Aroua, M.K. (2010) Control of a hydrolyzer in an oleochemical plant using neural network based controllers. Neurocomputing, 73 (16-18). pp. 3242-3255. ISSN 0925-2312

Lim, P.K. and Ng, S.C. and Jassim, W.A. and Redmond, S.J. and Zilany, M. and Avolio, A. and Lim, E. and Tan, M.P. and Lovell, N.H. (2015) Improved measurement of blood pressure by extraction of characteristic features from the cuff oscillometric waveform. Sensors, 15 (6). pp. 14142-14161. ISSN 14142-14161

Lim, P.S. and Ibrahim, S. and Mohd, H. and Mohammad, A.S. (2004) Comparing some physical and inorganic parameters of raw and treated river water in Selangor and Kuala Lumpur. Water Malaysia, 7. pp. 32-36. ISSN 1675-2392

Lim, T.W. and Moghavvemi, M. (2000) Capacitive fingerprint sensor chip for automatic matching. In: IEEE Region 10 Annual International Conference, Proceedings/TENCON, 24 - 27 September 2000, Kuala Lumpur, Malaysia.

Lin, Yu Kiat and Show, Pau Loke and Yap, Yee Jiun and Ariff, Arbakariya and Annuar, Mohamad Suffian Mohamad and Lai, Oi Ming and Ling, Tau Chuan and Ng, Eng Poh (2018) Extractive Bioconversion of Gamma-Cyclodextrin and Recycling of Cyclodextrin Glycosyltransferase in Liquid Biphasic System Using Thermo-Separating Polymer. Frontiers in Chemistry, 6. p. 448. ISSN 2296-2646

Ling, Tung Chai and Qu, Lie and Yang, Jiujun and Guo, Lei and Mo, Kim Hung (2018) Autoclaved Lime-Saline Soil Products: Reactivity Assessments and Effects of Quartz Sand. Journal of Materials in Civil Engineering, 30 (4). 04018055. ISSN 0899-1561

Liu, H. and Ji-sen, S. and Hanif, N.R. and Wen-jia, X. and Xin, L. and Hong-wen, J. and Li, M. (2015) Influence law of multipoint vibration load on slope stability in Xiaolongtan open pit mine in Yunnan, China. Journal of Central South University , 22 (12). pp. 4819-4827. ISSN 2095-2899

Liza, S. and Haseeb, A.S. Md. Abdul and Abbas, A.A. and Masjuki, Haji Hassan (2011) Failure analysis of retrieved UHMWPE tibial insert in total knee replacement. Engineering Failure Analysis, 18 (6). pp. 1415-1423. ISSN 1350-6307

Liza, S. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Abbas, A.A. (2013) The Wear Behavior of Cross-Linked UHMWPE under Dry and Bovine Calf Serum–Lubricated Conditions. Tribology Transactions, 56 (1). pp. 130-140. ISSN 0569-8197

Liza, S. and Ohtake, N. and Akasaka, H. and Munoz-Guijosa, J.M. (2015) Tribological and thermal stability study of nanoporous amorphous boron carbide films prepared by pulsed plasma chemical vapor deposition. Science and Technology of Advanced Materials, 16 (3). p. 13. ISSN 1468-6996

Lokman, M.Q. and Rahim, H.R.A. and Harun, Sulaiman Wadi and Hornyak, G.L. and Mohammed, W.S. (2016) Light backscattering (e.g. reflectance) by ZnO nanorods on tips of plastic optical fibres with application for humidity and alcohol vapour sensing. Micro and Nano Letters, 11 (12). pp. 832-836. ISSN 1750-0443

Long, B.D. and Othman, R. and Zuhailawati, H. and Umemoto, M. (2014) Comparison of Two Powder Processing Techniques on the Properties of Cu-NbC Composites. Advances in Materials Science and Engineering, 2014. pp. 1-6. ISSN 1687-8434

Loo, C.K. and Liew, W.S. and Seera, M. and Lim, E. (2015) Probabilistic ensemble fuzzy ARTMAP optimization using hierarchical parallel genetic algorithms. Neural Computing & Applications, 26 (2). pp. 263-276. ISSN 0941-0643

Loo, P.L. and Chong, V.C. and Ibrahim, S. and Sabaratnam, V. (2015) Manipulating culture conditions and feed quality to increase the survival of larval marble goby oxyeleotris marmorata. North American Journal of Aquaculture, 77 (2). pp. 149-159. ISSN 1522-2055

Loo, P.L. and Chong, V.C. and Vikineswary, S. and Ibrahim, S. (2015) Waste‐grown phototrophic bacterium supports culture of the rotifer, Brachionus rotundiformis. Aquaculture Research, 47 (10). pp. 3029-3041. ISSN 1355-557X

Low, W.S. and Wan Abas, Wan Abu Bakar (2015) Benchtop technologies for circulating tumor cells separation based on biophysical properties. BioMed Research International. p. 22. ISSN 2314-6133

Low, W.Y. and Aziz, J.A. and Idris, N.R.N. and Saidur, R. (2013) Electrical model to predict current-voltage behaviours of lithium ferro phosphate batteries using a transient response correction method. Journal of Power Sources, 221. pp. 201-209. ISSN 0378-7753

Luo, D. and Ibrahim, Z. and Ma, J. and Ismail, Z. and Iseley, D. (2016) Tapered Polymer Fiber Sensors for Reinforced Concrete Beam Vibration Detection. Sensors, 16 (12). p. 2149. ISSN 1424-8220

Luo, D. and Li, P. and Yue, Y.C. and Ma, J.X. and Yang, H.Z. (2017) In-Fiber Optic Salinity Sensing: A Potential Application for Offshore Concrete Structure Protection. Sensors, 17 (5). p. 962. ISSN 1424-8220

Lwin, N. and Othman, R. and Sreekantan, S. and Fauzi, M.N.A. (2015) Study on the structural and electromagnetic properties of Tm-substituted Mg-Mn ferrites by a solution combustion method. Journal of Magnetism and Magnetic Materials, 385. pp. 433-440. ISSN 0304-8853

M

Madhloom, H.T. and Kareem, S.A. and Ariffin, H. (2015) Computer-aided acute leukemia blast cells segmentation in peripheral blood images. Journal of Vibroengineering , 17 (8). pp. 4517-4532. ISSN 1392-8716

Madlool, N.A. and Saidur, R. and Hossain, M.S. and Rahim, N.A. (2011) A critical review on energy use and savings in the cement industries. Renewable and Sustainable Energy Reviews, 15 (4). pp. 2042-2060. ISSN 1364-0321

Madlool, N.A. and Saidur, R. and Rahim, N.A. and Islam, M.R. and Hossian, M.S. (2012) An exergy analysis for cement industries: an overview. Renewable and Sustainable Energy Reviews, 16 (1). pp. 921-932. ISSN 1364-0321

Maghfouri, Mehdi and Shafigh, Payam and Aslam, Muhammad (2018) Optimum Oil Palm Shell Content as Coarse Aggregate in Concrete Based on Mechanical and Durability Properties. Advances in Materials Science and Engineering, 2018. pp. 1-14. ISSN 1687-8434

Mahamudul, H. and Rahman, M.M. and Metselaar, H.S.C. and Mekhilef, S. and Shezan, S.A. and Sohel, R. and Sayuti, M. and Badiuzaman, W.N.I. (2016) Temperature Regulation of Photovoltaic Module Using Phase Change Material: A Numerical Analysis and Experimental Investigation. International Journal of Photoenergy, 2016. pp. 1-8. ISSN 1110-662X

Mahbubul, I.M. and Chong, T.H. and Khaleduzzaman, S.S. and Shahrul, I.M. and Saidur, R. and Long, B.D. and Amalina, M.A. (2014) Effect of Ultrasonication Duration on Colloidal Structure and Viscosity of Alumina–Water Nanofluid. Industrial and Engineering Chemistry Research, 53 (16). pp. 6677-6684. ISSN 0888-5885

Mahbubul, I.M. and Fadhilah, S.A. and Saidur, Rahman and Leong, K.Y. and Amalina, M.A. (2013) Thermophysical properties and heat transfer performance of Al2O3/R-134a nanorefrigerants. International Journal of Heat and Mass Transfer, 57 (1). pp. 100-108. ISSN 0017-9310

Mahbubul, I.M. and Saidur, R. and Amalina, M.A. (2012) Investigation of viscosity of R123-TIO 2 nanorefrigerant. International Journal of Mechanical and Materials Engineering, 7 (2). pp. 146-151. ISSN 18230334

Mahbubul, I.M. and Saidur, Rahman and Amalina, M.A. (2012) Latest developments on the viscosity of nanofluids. International Journal of Heat and Mass Transfer, 55 (4). pp. 874-885. ISSN 0017-9310

Mahdavi, S.H. and Abdul Razak, H. (2013) A wavelet-based approach for vibration analysis of framed structures. Applied Mathematics and Computation, 220. pp. 414-428. ISSN 00963003

Mahdavi, S.H. and Razak, H.A. (2015) A comparative study on optimal structural dynamics using wavelet functions. Mathematical Problems in Engineering. p. 10. ISSN 1024-123X

Mahdavi, S.H. and Razak, H.A. (2015) An efficient iterative scheme using family of chebyshev's operations. Mathematical Problems in Engineering. p. 10. ISSN 1024-123X

Mahdavifard, M.H. and Haseeb, A.S. Md. Abdul and Arafat, M.M. (2013) Reflow of Sn-3.8Ag-O.7Cu solder on Ni substrate in presence of Mo nanoparticles. In: 1st International Conference on the Science & Engineering of Materials, 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Mahdiraji, G.A. and Abas, A.F. (2012) Improving the performance of electrical duty-cycle division multiplexing with optimum signal level spacing. Optics Communications, 285 (7). pp. 1819-1824. ISSN 0030-4018

Mahdiraji, G.A. and Abdullah, M.K. and Abas, A.F. and Mokhtar, M. and Mohammadi, A.M. (2008) Analysis of the transmission performance of optical signals based on duty cycle division multiplexing (DCDM). In: Telecommunication Technologies 2008 and 2008 2nd Malaysia Conference on Photonics. NCTT-MCP 2008. 6th National Conference on, 2008.

Mahdiraji, G.A. and Abdullah, M.K. and Elhag, M.F. and Abas, A.F. and Zahedi, E. and Mokhtar, M. (2007) Duty cycle division multiplexing technique for wireless communications. In: Wireless and Optical Communications Networks, 2007. WOCN'07. IFIP International Conference on, 2007.

Mahdiraji, G.A. and Abdullah, M.K. and Mohammadi, A.M. and Abas, A.F. and Mokhtar, M. and Zahedi, E. (2010) Duty-cycle division multiplexing (DCDM). Optics and Laser Technology, 42 (2). pp. 289-295. ISSN 0030-3992

Mahdiraji, G.A. and Abdullah, M.K. and Mokhtar, M. and Malekmohammadi, A. and Abas, A.F. (2009) Duty-cycle-division-multiplexing: bit error rate estimation and performance evaluation. Optical Review, 16 (4). pp. 422-425. ISSN 1340-6000

Mahdiraji, G.A. and Malekmohammadi, A. and Abas, A.F. and Mokhtar, M. (2009) A novel economical duty cycle division multiplexing with electrical multiplexer and demultiplexer for optical communication systems. International Journal of Information and Communication Technology, 2 (1). pp. 31-40. ISSN 1466-6642

Mahdiraji, G.A. and Mohamed, A. (2006) Classifying short duration voltage disturbances using fuzzy expert system. In: 4th Student Conference on Research and Development, 2006. SCOReD 2006. , 2006.

Mahdiraji, G.A. and Mohamed, A. (2012) A fuzzy expert system for classification of short duration voltage disturbances. Jurnal Teknologi, 45. pp. 41-57. ISSN 2180-3722

Mahdiraji, G.A. and Zahedi, E. (2006) Comparison of selected digital modulation schemes (OOK, PPM and DPIM) for wireless optical communications. In: Research and Development, 2006. SCOReD 2006. 4th Student Conference on, 2006.

Mahdiraji, Ghafour Amouzad and Abas, A.F. (2012) Self-Phase modulation effect on performance of 40 Gbit/s optical duty-cycle division multiplexing technique. Journal of Optical Communications, 33 (1). pp. 43-49. ISSN 0173-4911

Mahlia, T.M.I. and Husnawan, M. and Masjuki, Haji Hassan and Remuslara, L. and Saidur, Rahman (2009) Energy savings potential by substituting driving with walking and cycling for short distance. In: 2008 ASME International Mechanical Engineering Congress and Exposition, IMECE 2008, 2009, Boston, MA.

Mahlia, T.M.I. and Husnawan, M. and Masjuki, Haji Hassan and Remuslara, L. and Saidur, Rahman (2009) Energy savings potential by substituting driving with walking and cycling for short distance. In: 2008 ASME International Mechanical Engineering Congress and Exposition, IMECE 2008, 2009, Boston, MA.

Mahlia, T.M.I. and Masjuki, Haji Hassan and Choudhury, I.A. and Saidur, Rahman (2001) Potential CO2 reduction by implementing energy efficiency standard for room air conditioner in Malaysia. Energy Conversion and Management, 42 (14). pp. 1673-1685. ISSN 0196-8904

Mahlia, T.M.I. and Masjuki, Haji Hassan and Choudhury, I.A. and Saidur, Rahman (2002) Testing and rating non-ducted air conditioners in Malaysia: The applicability of ISO standard 5151. International Journal of Power and Energy Systems, 22 (2). pp. 80-84. ISSN 1078-3466

Mahlia, T.M.I. and Masjuki, Haji Hassan and Choudhury, Imtiaz Ahmed and Saidur, Rahman (2001) Potential CO2 reduction by implementing energy efficiency standard for room air conditioner in Malaysia. Energy Conversion and Management, 42 (14). pp. 1673-1685. ISSN 0196-8904

Mahlia, T.M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Amalina, M.A. (2004) Cost-benefit analysis of implementing minimum energy efficiency standards for household refrigerator-freezers in Malaysia. Energy Policy, 32 (16). pp. 1819-1824. ISSN 03014215

Mahlia, T.M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Amalina, M.A. (2004) Mitigation of emissions through energy efficiency standards for room air conditioners in Malaysia. Energy Policy, 32 (16). pp. 1783-1787. ISSN 0301-4215

Mahlia, T.M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Amalina, M.A. (2004) Viewpoint: Mitigation of emissions through energy efficiency standards for room air conditioners in Malaysia. Energy policy, 32 (16). pp. 1783-1787. ISSN 0301-4215

Mahlia, T.M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Choudhury, I.A. and NoorLeha, A.R. (2003) Projected electricity savings from implementing minimum energy efficiency standard for household refrigerators in Malaysia. Energy, 28 (7). pp. 751-754. ISSN 0360-5442

Mahlia, T.M.I. and Masjuki, Haji Hassan and Taha, F.M. and Rahim, N.A. and Saidur, Rahman (2005) Energy labeling for electric fans in Malaysia. Energy Policy, 33 (1). pp. 63-68. ISSN 0301-4215

Mahlia, T.M.I. and Razak, H. Abdul and Nursahida, M.A. (2011) Life cycle cost analysis and payback period of lighting retrofit at the University of Malaya. Renewable and Sustainable Energy Reviews, 15 (2). pp. 1125-1132. ISSN 13640321

Mahlia, T.M.I. and Razak, H.A. and Nursahida, M.A. (2011) Life cycle cost analysis and payback period of lighting retrofit at the University of Malaya. Renewable & Sustainable Energy Reviews, 15 (2). pp. 1125-1132. ISSN 1364-0321

Mahlia, T.M.I. and Saidur, R. (2010) A review on test procedure, energy efficiency standards and energy labels for room air conditioners and refrigerator-freezers. Renewable and Sustainable Energy Reviews, 14 (7). pp. 1888-1900. ISSN 1364-0321

Mahlia, T.M.I. and Saidur, R. and Yanti, P.A.A. and Masjuki, Haji Hassan (2011) Role of energy guide labels in consumers purchase decision for household electrical appliances. Energy Education Science and Technology Part A: Energy Science and Research, 27 (1). pp. 95-104. ISSN 1308-772X

Mahlia, T.M.I. and Taufiq, B.N. and Ong, K.P. and Saidur, R. (2011) Exergy analysis for day lighting, electric lighting and space cooling systems for a room space in a tropical climate. Energy and Buildings, 43 (7). pp. 1676-1684. ISSN 0378-7788

Mahlia, T.M.I. and Yong, J.H. and Safari, A. and Mekhilef, S. (2012) Techno-economic analysis of palm oil mill wastes to generate power for grid-connected utilization. Energy Education Science and Technology Part A: Energy Science and Research, 28 (2). pp. 1111-1130. ISSN 11308-772X

Mahlia, Teuku Meurah Indra and Hor, C.G. and Masjuki, Haji Hassan and Husnawan, M. and Varman, M. and Mekhilef, Saad (2010) Clothes drying from room air conditioning waste heat: thermodynamics investigation. Arabian Journal for Science and Engineering, 35 (1B). pp. 339-351. ISSN 1319-8025

Mahlia, Teuku Meurah Indra and Saidur, Rahman and Husnawan, M. and Masjuki, Haji Hassan and Kalam, M.A. (2010) An approach to estimate the life-cycle cost of energy efficiency improvement of room air conditioners. Energy Education Science and Technology Part A: Energy Science and Research, 26 (1). pp. 1-11. ISSN 1308-772X

Mahlia, Teuku Meurah Indra and Saidur, Rahman and Memon, Liaquat Ali and Zulkifli, N.W.M. and Masjuki, Haji Hassan (2010) A review on fuel economy standard for motor vehicles with the implementation possibilities in Malaysia. Renewable and Sustainable Energy Reviews, 14 (9). pp. 3092-3099. ISSN 1364-0321

Mahmodian, M.S. and Rahmani, R. and E., Taslimi and Mekhilef, S. (2012) Step by step analyzing, modeling and simulation of single and double array PV system in different environmental variability. 2012 International Conference on Future Environment and Energy IPCBEE, 28. pp. 37-42.

Mahmoodian, R. and Hamdi, M. and Hassan, M.A. and Akbari, A. (2015) Mechanical and chemical characterization of a TiC/C system synthesized using a focus plasma arc. PLoS ONE, 10 (6). p. 10. ISSN 1932-6203

Mahmoud, S.S. and Jusoff, K. and Li, K. (2011) Effective induction motor controller based Voltage/frequency. In: International Conference on Electronic Computer Technology , FEB 20-22, 2009, Macau.

Mahmud, H.B. and Jumaat, M.Z. and Alengaram, U.J. (2009) Influence of sand/cement ratio on mechanical properties of palm kernel shell concrete. Journal of Applied Sciences, 9 (9). pp. 1764-1769. ISSN 18125654

Mahrez, A. and Karim, Mohamed Rehan (2010) Fatigue characteristics of stone mastic asphalt mix reinforced with fiber glass. International Journal of the Physical Sciences, 5 (12). pp. 1840-1847. ISSN 1992-1950

Mahyiddin, W.A.W.M. and Martin, P.A. and Smith, P.J. (2015) Performance of Synchronized and Unsynchronized Pilots in Finite Massive MIMO Systems. IEEE Transactions On Wireless Communications , 14 (12). pp. 6763-6776. ISSN 1536-1276

Maisarah, L. and Rahbari, R.G. and Hamdi, M. and Fadzil, M. and Farazila, Y. (2013) Characteristics of hybrid microwave sintering of Zn-AI-Cu-Mg alloy. In: 1st International Conference on the Science & Engineering Materials, 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur.

Makinejad, M.D. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Bayat, M. (2013) Preliminary analysis of knee stress in full extension landing. Clinics, 68 (9). pp. 1180-1188. ISSN 1807-5932

Malekmohammadi, A. and Abas, A.F. and Abdullah, M.K. and Mahdiraji, G.A. and Mokhtar, M. and Rasid, M.F.A. (2009) Absolute polar duty cycle division multiplexing over wavelength division multiplexing system. Optics Communications, 282 (21). pp. 4233-4241. ISSN 0030-4018

Malekmohammadi, A. and Abdullah, M.K. and Abas, A.F. and Mahdiraji, G.A. (2010) Effect of guard band on the performance of AP-DCDM technique in 40 Gb/s optical fiber communication system. In: Photonics (ICP), 2010 International Conference on, 2010.

Malekmohammadi, A. and Abdullah, M.K. and Abas, A.F. and Mahdiraji, G.A. and Mokhtar, M. (2008) Absolute Polar Duty Cycle Division Multiplexing (APDCDM); technique for wireless communications. In: Computer and Communication Engineering, 2008. ICCCE 2008. International Conference on, 2008.

Malekmohammadi, A. and Abdullah, M.K. and Mahdiraji, G.A. and Abas, A.F. and Mokhtar, M. (2008) 30Gb/s absolute polar duty cycle division multiplexing in dispersion uncompensated optical systems. In: Telecommunication Technologies 2008 and 2008 2nd Malaysia Conference on Photonics. NCTT-MCP 2008. 6th National Conference on.

Malekmohammadi, A. and Abdullah, M.K. and Mahdiraji, G.A. and Abas, A.F. and Mokhtar, M. and Rasid, M.F.A. and Basir, S.M. (2009) Analysis of return-to-zero-on-off-keying over absolute polar duty cycle division multiplexing in dispersive transmission medium. IET Optoelectronics, 3 (4). pp. 197-206. ISSN 1751-8768

Malekmohammadi, A. and Abdullah, M.K. and Mahdiraji, G.A. and Abas, A.F. and Mokhtar, M. and Rasid, M.F.A. and Basir, S.M. (2008) Decision circuit and bit error rate estimation for absolute polar duty cycle division multiplexing. International Review of Electrical Engineering-Iree, 3 (4). pp. 592-599. ISSN 1827-6660

Malekmohammadi, A. and Al-Mansoori, M.H. and Mahdiraji, G.A. and Abas, A.F. and Abdullah, M.K. (2010) Performance enhancement of absolute polar duty cycle division multiplexing with dual-drive mach zehnder-modulator in 40Gbit/s optical fiber communication systems. Optics Communications, 283 (16). pp. 3145-3148. ISSN 0030-4018

Malekmohammadi, A. and Mahdiraji, G.A. and Abas, A.F. and Abdullah, M.K. and Mokhtar, M. and Fadlee, M. and Rasid, A. (2008) Performance analysis on transmission of multilevel optical pulses using Absolute Polar Duty Cycle Division multiplexing. In: Electronic Design, 2008. ICED 2008. International Conference on, 2008.

Malekmohammadi, A. and Mahdiraji, G.A. and Abas, A.F. and Abdullah, M.K. and Mokhtar, M. and Rasid, M.F.A. (2009) Realization of high capacity transmission in fiber optic communication systems using absolute polar duty cycle division multiplexing (AP-DCDM) technique. Optical Fiber Technology, 15 (4). pp. 337-343. ISSN 1068-5200

Mamun, M.A.H. and Rahman, M.M. and Billah, M.M. and Saidur, R. (2010) A numerical study on the effect of a heated hollow cylinder on mixed convection in a ventilated cavity. International Communications in Heat and Mass Transfer, 37 (9). pp. 1326-1334. ISSN 0735-1933

Mamun, M.A.H. and Tanim, T.R. and Rahman, M.M. and Saidur, R. and Nagata, S. (2010) Mixed convection analysis in trapezoidal cavity with a moving lid. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 18-28. ISSN 1823-0334

Mamun, N. and Jassim, W.A. and Zilany, M.S.A. (2015) Prediction of speech intelligibility using a neurogram orthogonal polynomial measure (NOPM). IEEE/ACM Transactions on Audio, Speech and Language Processing, 23 (4). pp. 760-773. ISSN 2329-9290

Manivannan, G. and Karim, M.R. and Gnanendran, C.T. and Lo, S.C.R. (2011) Calculated and observed long term performance of Leneghans embankment. Geomechanics and Geoengineering, 6 (3). pp. 195-207. ISSN 1748-6033

Mansor, M.R.A. and Hoo, C.L. and Taib, N.M. and Aizon, W.G.W. and Ilham, Z. (2017) The effect of increasing the percentage of hydrogen added to methane in direct injection spark ignition engine to the composition of CO and CO2 emissions. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3145-3150. ISSN 1819-6608

Mansouri, I. and Safa, M. and Ibrahim, Z. and Kisi, O. and Tahir, M.M. and Baharom, S. and Azimi, M. (2016) Strength prediction of rotary brace damper using MLR and MARS. Structural Engineering and Mechanics, 60 (3). pp. 471-488. ISSN 1225-4568

Mansouri, M. and Gregory, S.D. and Salamonsen, R.F. and Lovell, N.H. and Stevens, M.C. and Pauls, J.P. and Akmeliawati, R. and Lim, E. (2017) Preload-based Starling-like control of rotary blood pumps: An in-vitro evaluation. PLoS ONE, 12 (2). e0172393. ISSN 1932-6203

Mansouri, M. and Salamonsen, R.F. and Lim, E. and Akmeliawati, R. and Lovell, N.H. (2015) Preload-based starling-like control for rotary blood pumps: Numerical comparison with pulsatility control and constant speed operation. PLoS ONE, 10 (4). p. 16. ISSN 1932-6203

Mariappan, Saravanan and Ali, Faisal and Mohamad, Ashaari and Abdullah, Che Hassandi Abdullah and Hassan, N.R.N. and Chong, S. and Huat, Low Tian (2010) Undertaking loss reduction measures to prevent slope failures. Scientific Research and Essays, 5 (2). pp. 119-129. ISSN 1992-2248

Mashaan, N.S. and Ali, A.H. and Karim, M.R. and Abdelaziz, M. (2011) Effect of blending time and crumb rubber content on properties of crumb rubber modified asphalt binder. International Journal of Physical Sciences, 6 (9). pp. 2189-2193. ISSN 19921950

Mashaan, N.S. and Ali, A.H. and Karim, M.R. and Abdelaziz, M. (2012) An overview of crumb rubber modified asphalt. International Journal of Physical Sciences, 7 (2). pp. 166-170. ISSN 19921950

Mashaan, N.S. and Ali, A.H. and Karim, Mohamed Rehan and Abdelaziz, M. (2011) Effect of crumb rubber concentration on the physical and rheological properties of rubberised bitumen binders. International Journal of the Physical Sciences, 6 (4). pp. 684-690. ISSN 1992-1950

Mashaan, N.S. and Ali, A.H. and Koting, S. and Karim, M.R. (2013) Dynamic properties and fatigue life of stone mastic asphalt mixtures reinforced with waste tyre rubber. Advances in Materials Science and Engineering, 2013. pp. 1-9. ISSN 1687-8434

Mashaan, N.S. and Ali, A.H. and Koting, S. and Karim, M.R. (2013) Performance evaluation of crumb rubber modified stone mastic asphalt pavement in Malaysia. Advances in Materials Science and Engineering, 2013. pp. 1-8. ISSN 1687-8434

Mashaan, N.S. and Karim, M.R. (2013) Investigating the rheological properties of crumb rubber modified bitumen and its correlation with temperature susceptibility. Materials Research-Ibero-American Journal of Materials, 16 (1). pp. 116-127. ISSN 1516-1439

Mashaan, Nuha Salim and Karim, Mohamed Rehan (2013) Evaluation of permanent deformation of CRM-reinforced SMA and its correlation with dynamic stiffness and dynamic creep. Scientific World Journal, 2013. p. 981637. ISSN 2356-6140

Masjuki, Haji Hassan and Kalam, M.A. and Syazly, M. and Mahlia, T.M.I. and Rahman, A.H. and Redzuan, M. and Varman, M. and Saidur, Rahman and Yau, Y.H. (2006) Experimental evaluation of an unmodified diesel engine using biodiesel with fuel additive. In: 1st International Forum On Strategic Technology "e-Vehicle Technology", IFOST 2006, 2006, Ulsan.

Masjuki, Haji Hassan and Mahlia, T.M.I. and Choudhury, I.A. and Saidur, Rahman (2000) Literature review on energy efficiency standards and labels for household electrical appliances. In: 2000 TENCON Proceedings, 2000, Kuala Lumpur, Malaysia.

Masjuki, Haji Hassan and Mahlia, T.M.I. and Choudhury, I.A. and Saidur, Rahman (2002) Potential CO2 reduction by fuel substitution to generate electricity in Malaysia. Energy Conversion and Management, 43 (6). pp. 763-770. ISSN 0196-8904

Masjuki, Haji Hassan and Mahlia, T.M.I. and Choudhury, I.A. and Saidur, Rahman (2000) A literature review on energy efficiency standards and labels for household electrical appliances. In: TENCON 2000. Proceedings, 2000.

Masjuki, Haji Hassan and Saidur, Rahman and Choudhury, I.A. and Mahlia, T.M.I. (2000) Factors effecting energy consumption of household refrigerator-freezers. In: 2000 TENCON Proceedings, 2000, Kuala Lumpur, Malaysia.

Masjuki, Haji Hassan and Saidur, Rahman and Choudhury, Imtiaz Ahmed and Mahlia, T.M.I. and Ghani, A.K. and Maleque, M.A. (2001) The applicability of ISO household refrigerator-freezer energy test specifications in Malaysia. Energy, 26 (7). pp. 723-737. ISSN 0360-5442

Mat, Zawiah and Sulaiman, Nooraini and Arif, Sazelin and Sidek, Safiah and Ismail, Norain and Basir, Siti Arni (2018) The relationship between professional and universal ethics of engineers. Humanities & Social Sciences Reviews, 6 (2). pp. 121-126. ISSN 2395-6518

Mat Noor, N.A. and Mohamed, H. (2009) Fibre reinforced polymer concrete structures – opportunities and concerns. In: International Conference on Building Science and Engineering 2009, 14-15 Dec 2009, Johor Bahru.

Matsumoto, T. and Takahashi, T. and Iwahashi, M. and Kimura, T. and Salbiah, S. and Mokhtar, N. (2011) Visual compensation in localization of a robot on a ceiling map. Scientific Research and Essays, 6 (1). pp. 131-135. ISSN 1992-2248

Matsumoto, T. and Takahashi, T. and Iwahashi, M. and Kimura, T. and Salbiah, S. and Mokhtar, Norrima (2010) Reduction of data size for transmission in localization of mobile robots. International Journal of the Physical Sciences, 5 (17). pp. 2652-2657. ISSN 1992-1950

Mazandarani, A. and Mahlia, T.M.I. and Chong, W.T. and Moghavvemi, M. (2011) Fuel consumption and emission prediction by Iranian power plants until 2025. Renewable and Sustainable Energy Reviews, 15 (3). pp. 1575-1592. ISSN 13640321

Mazandarani, A. and Mahlia, T.M.I. and Chong, W.T. and Moghavvemi, M. (2010) A review on the pattern of electricity generation and emission in Iran from 1967 to 2008. Renewable and Sustainable Energy Reviews, 14 (7). pp. 1814-1829. ISSN 13640321

Mazlan, M.H. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar (2011) Hip 3D joint mechanics analysis of normal and obese individuals' gait. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Md Dawal, S.Z. (2010) CMTM10 investigation on upper limb and lower back muscles activities during sedentary work. In: World Engineering Congress 2010,Conference on Manufacturing Technology and Management, 2-5 August 2010, Kuching,Sarawak. (Unpublished)

Md Dawal, Siti Zawiah and Ismail, Z. and Yusuf, K. and Abdul-Rashid, S.H. and Shalahim, N.S.M. and Abdullah, N.S. and Kamil, N.S.M. (2015) Determination of the significant anthropometry dimensions for user-friendly designs of domestic furniture and appliances - Experience from a study in Malaysia. Measurement, 59. pp. 205-215. ISSN 0263-2241

Md Nasir, Khairunisa and Ramli Sulong, Nor Hafizah and Johan, Mohd Rafie and Afifi, Amalina Muhammad (2018) An investigation into waterborne intumescent coating with different fillers for steel application. Pigment & Resin Technology, 47 (2). pp. 142-153. ISSN 0369-9420

Meau, Y.P. and Ibrahim, F. and Narainasamy, S.A.L. and Omar, R. (2006) Intelligent classification of electrocardiogram (ECG) signal using extended Kalman Filter (EKF) based neuro fuzzy system. Computer Methods and Programs in Biomedicine, 82 (2). pp. 157-168. ISSN 0169-2607

Mehbudi, P. and Baghlani, V. and Akbari, J. and Bushroa, A.R. and Mardi, N.A. (2013) Applying Ultrasonic Vibration to Decrease Drilling-Induced Delamination in GFRP Laminates. Procedia CIRP, 6. pp. 577-582. ISSN 2212-8271

Mehrabi, M.H. and Ibrahim, Zainah and Ghodsi, S.S. and Suhatril, Meldi (2019) Seismic characteristics of X-cable braced frames bundled with a pre-compressed spring. Soil Dynamics and Earthquake Engineering, 116. pp. 732-746. ISSN 0267-7261

Mehrali, M. and Sadeghinezhad, E. and Rashidi, M.M. and Akhiani, A.R. and Latibari, S.T. and Mehrali, M. and Metselaar, H.S.C. (2015) Experimental and numerical investigation of the effective electrical conductivity of nitrogen-doped graphene nanofluids. Journal of Nanoparticle Research, 17 (6). p. 17. ISSN 1388-0764

Mehran, Q.M. and Bushroa, Abdul Razak and Fazal, M.A. (2015) Evaluation of CrAlN multilayered coatings deposited by PVD magnetron sputtering. Journal of Adhesion Science and Technology, 29 (19). pp. 2076-2089. ISSN 0169-4243

Mehrkanoon, S. and Moghavvemi, M. and Fariborzi, H. (2007) Real time De-mixing system based on LMS adaptive algorithm for blind two source signals separation. In: 2007 5th Student Conference on Research and Development, SCORED, 11 - 12 December 2007, Selangor, Malaysia.

Mehrkanoon, S. and Moghavvemi, M. and Fariborzi, H. (2007) Real time ocular and facial muscle artifacts removal from EEG signals using LMS adaptive algorithm. In: 2007 International Conference on Intelligent and Advanced Systems, ICIAS 2007, 25 - 28 November 2007, Kuala Lumpur, Malaysia.

Mekhilef, S. (2011) Three phase hybrid multilevel inverter control using vector transformation. In: 2011 Canadian Conference on Electrical and Computer Engineering, CCECE 2011, Niagara Falls, ON.

Mekhilef, S. and Ahmed, M.E. and Younis, M.A.A. (2008) Performance of grid connected photovoltaic inverter with maximum power point tracker and power factor control. In: IEEE Canadian Conference on Electrical and Computer Engineering, CCECE 2008, Niagara Falls, ON.

Mekhilef, S. and Chandrasegaran, D. (2011) Assessment of off-shore wind farms in Malaysia. In: 2011 IEEE Region 10 Conference: Trends and Development in Converging Technology Towards 2020, TENCON 2011, Bali.

Mekhilef, S. and Chard, T.R. and Ramachandramurthy, V.K. (2010) Voltage rise due to inter-connection of embedded generators to distribution network. Journal of Scientific & Industrial Research, 69 (6). pp. 433-438. ISSN 0022-4456

Mekhilef, S. and Chard, T.R. and Ramachandramurthy, V.K. (2009) Voltage rise due to inter-connection of embedded generators to distribution network on weak feeder. In: 2009 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2009, Kuala Lumpur.

Mekhilef, S. and Faramarzi, S.Z. and Saidur, R. and Salam, Z. (2013) The application of solar technologies for sustainable development of agricultural sector. Renewable and Sustainable Energy Reviews, 18. pp. 583-594. ISSN 1364-0321

Mekhilef, S. and Hassani, M. and Mehbodniya, A. and Tebianian, H. (2009) Design and implementation of a level detector. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009.

Mekhilef, S. and Kadir, M.N.A. (2011) Novel vector control method for three-stage hybrid cascaded multilevel inverter. IEEE Transactions on Industrial Electronics, 58 (4). pp. 1339-1349. ISSN 0278-0046

Mekhilef, S. and Kadir, M.N.A. (2010) Voltage control of three-stage hybrid multilevel inverter using vector transformation. IEEE Transactions on Power Electronics, 25 (10). pp. 2599-2606. ISSN 08858993

Mekhilef, S. and Khudhur, H.I. and Belkamel, H. (2012) DC link capacitor voltage balancing in three level neutral point clamped inverter. In: 2012 IEEE 13th Workshop on Control and Modeling for Power Electronics, COMPEL 2012, 2012, Kyoto.

Mekhilef, S. and Masaoud, A. (2006) Xilinx FPGA based multilevel PWM single phase inverter. In: 2006 IEEE International Conference on Industrial Technology, ICIT, Mumbai.

Mekhilef, S. and Omar, A.M. and Muhammad, K.S. (2006) An improved topology of digitally-controlled single-phase single-stage high DC voltage converter. In: 37th IEEE Power Electronics Specialists Conference 2006, PESC'06, Jeju.

Mekhilef, S. and Omar, A.M. and Rahim, N.A. (2007) Modeling of three-phase uniform symmetrical sampling digital PWM for power converter. IEEE Transactions on Industrial Electronics, 54 (1). pp. 427-432. ISSN 0278-0046

Mekhilef, S. and Rahim, N.A. (2003) FPGA based ASIC power-factor control for three-phase inverter. In: Proceedings of 2003 IEEE Conference on Control Applications, Istanbul.

Mekhilef, S. and Rahim, N.A. (2002) Field programmable gate array based three-phase PWM inverter. In: IEEE/PES Transmission and Distribution Conference and Exhibition 2002 : Asia Pacific, Yokahama.

Mekhilef, S. and Rahim, N.A. (2004) Generation of three-phase PWM inverter using xilinx FPGA and its application for utility connected PV system. International Journal of Engineering, Transactions B: Applications, 17 (3). pp. 271-276. ISSN {Mekhilef, 2004 #124}

Mekhilef, S. and Rahim, N.A. (2004) Implementation of grid-connected photovoltaic system with power factor control and islanding detection. In: 2004 IEEE 35th Annual Power Electronics Specialists Conference, PESC04, Aachen.

Mekhilef, S. and Rahim, N.A. (2002) Xilinx FPGA based three-phase PWM inverter and its application for utility connected PV system. In: 2002 IEEE Region 10 Conference on Computers, Communications, Control and Power Engineering, Beijing.

Mekhilef, S. and Rahim, N.A. and Karim, Z.A. (2000) Analysis of different type of PWM for three phase power converter. In: 2000 TENCON Proceedings, Kuala Lumpur, Malaysia.

Mekhilef, S. and Rahim, N.A. and Omar, A.M. (1999) Microprocessor implementation of three phase PWM switching strategies. In: Proceedings of the 1999 3rd IEEE International Conference on Power Electronics and Drive Systems (PEDS'99), Kowloon, Hong Kong.

Mekhilef, S. and Rahim, N.A. and Omar, A.M. (2004) Modelling of three-phase uniform symmetrical sampling digital PWM for power converter. In: 2004 IEEE 35th Annual Power Electronics Specialists Conference, PESC04, Aachen.

Mekhilef, S. and Rahim, N.A. and Omar, A.M. (2000) New solar energy conversion scheme implemented using grid-tied single phase inverter. In: 2000 TENCON Proceedings, Kuala Lumpur, Malaysia.

Mekhilef, S. and Rahim, N.A. and Ping, H.W. (2006) Performance of maximum power point tracker in tropical climate. In: 37th IEEE Power Electronics Specialists Conference 2006, PESC'06, Jeju.

Mekhilef, S. and Safari, A. and Chandrasegaran, D. (2012) Feasibility study of off-shore wind farms in Malaysia. Energy Education Science and Technology Part A: Energy Science and Research, 29 (1). pp. 519-530. ISSN 1308772X

Mekhilef, S. and Safari, A. and Mustaffa, W.E.S. and Saidur, R. and Omar, R. and Younis, M.A.A. (2012) Solar energy in Malaysia: current state and prospects. Renewable and Sustainable Energy Reviews, 16 (1). pp. 386-396. ISSN 1364-0321

Mekhilef, S. and Safari, A. and Mustaffa, W.E.S. and Saidur, R. and Omar, R. and Younis, M.A.A. (2012) Solar energy in Malaysia: current state and prospects. Renewable and Sustainable Energy Reviews, 16 (1). pp. 386-396. ISSN 1364-0321

Mekhilef, S. and Saidur, R. and Kamalisarvestani, M. (2012) Effect of dust, humidity and air velocity on efficiency of photovoltaic cells. Renewable & Sustainable Energy Reviews, 16 (5). pp. 2920-2925. ISSN 1364-0321

Mekhilef, S. and Saidur, R. and Kamalisarvestani, M. (2012) Effect of dust, humidity and air velocity on efficiency of photovoltaic cells. Renewable and Sustainable Energy Reviews, 16 (5). pp. 2920-2925. ISSN 1364-0321

Mekhilef, S. and Saidur, R. and Safari, A. (2012) Comparative study of different fuel cell technologies. Renewable and Sustainable Energy Reviews, 16 (1). pp. 981-989. ISSN 1364-0321

Mekhilef, S. and Saidur, R. and Safari, A. (2012) Comparative study of different fuel cell technologies. Renewable & Sustainable Energy Reviews, 16 (1). pp. 981-989. ISSN 1364-0321

Mekhilef, S. and Saidur, R. and Safari, A. (2011) A review on solar energy use in industries. Renewable and Sustainable Energy Reviews, 15 (4). pp. 1777-1790. ISSN 1364-0321

Mekhilef, S. and Saidur, R. and Safari, A. (2011) A review on solar energy use in industries. Renewable and Sustainable Energy Reviews, 15 (4). pp. 1777-1790. ISSN 13640321

Mekhilef, S. and Saidur, R. and Safari, A. and Mustaffa, W.E.S.B. (2011) Biomass energy in Malaysia: current state and prospects. Renewable and Sustainable Energy Reviews, 15 (7). pp. 3360-3370. ISSN 1364-0321

Mekhilef, S. and Saidur, R. and Safari, A. and Mustaffa, W.E.S.B. (2011) Biomass energy in Malaysia: current state and prospects. Renewable and Sustainable Energy Reviews, 15 (7). pp. 3360-3370. ISSN 1364-0321

Mekhilef, S. and Saleh, Y.I. and Ghazi, S. and Shadman, F. (2014) Technical issues of grid connected renewable energy sources: A new areas of research. In: World Renewable Energy Congress - WREC XIII, 03-08 Aug 2014, Kingston University. (Submitted)

Mekhilef, S. and Siga, S. and Saidur, R. (2011) A review on palm oil biodiesel as a source of renewable fuel. Renewable and Sustainable Energy Reviews, 15 (4). pp. 1937-1949. ISSN 1364-0321

Mekhilef, S. and Siga, S. and Saidur, R. (2011) A review on palm oil biodiesel as a source of renewable fuel. Renewable and Sustainable Energy Reviews, 15 (4). pp. 1937-1949. ISSN 1364-0321

Mekhilef, S. and Tarek, M. and Abd. Rahim, N. (2011) Single-phase hybrid active power filter with adaptive notch filter for harmonic current estimation. IETE Journal of Research, 57 (1). pp. 20-28. ISSN 0377-2063

Menshawi, K.M. and Abdulkader, M.N. and Mekhilef, S. (2011) Voltage vector approximation control of multistage - Multilevel inverter using simplified logic implementation. In: 2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011, Singapore.

Menshawi, M.K. and Kadir, M.N.A. and Mekhilef, S. (2011) Two-dimensional hysteresis comparators to control multistage inverters with maximum number of levels. In: 8th International Conference on Power Electronics - ECCE Asia: "Green World with Power Electronics", ICPE 2011-ECCE Asia, Jeju.

Mesbah, M. and Faraji, G. and Bushroa, A.R. (2014) Characterization of nanostructured pure aluminum tubes produced by tubular channel angular pressing (TCAP). Materials Science and Engineering: A, 590. pp. 289-294. ISSN 0921-5093

Messikh, T. and Mekhilef, S. and Rahim, N.A. (2008) Adaptive notch filter for harmonic current mitigation. International Journal of Electrical and Electronics Engineering, 1 (4). p. 240.

Mihankhah, T. and Delnavaz, M. and Khaligh, N.G. (2016) Eco-friendly biodiesel production from olive oil waste using solar energy. Energy Sources, Part A, 38 (24). pp. 3668-3672. ISSN 1556-7036

Mihankhah, Taraneh and Delnavaz, Mohammad and Khaligh, Nader Ghaffari (2018) Application of TiO2 nanoparticles for eco-friendly biodiesel production from waste olive oil. International Journal of Green Energy, 15 (2). pp. 69-75. ISSN 1543-5075

Min, S.H. and Eberhardt, T.L. and Jang, M. (2007) Base-treated juniper fiber media for removing heavy metals in stormwater runoff. Polish Journal of Environmental Studies, 16 (5). pp. 731-738. ISSN 12301485

Ming, C.C. and Hussain, M.A. and Aroua, M.K. (2011) Neural network based controller for Cr 6+-Fe 2+ batch reduction process. Neurocomputing, 74 (18). pp. 3773-3784. ISSN 0925-2312

Ming, C.C. and Hussain, M.A. and Aroua, M.K. (2011) Neural network based controller for Cr6+–Fe2+ batch reduction process. Neurocomputing, 74 (18). pp. 3773-3784. ISSN 09252312

Mirzaei, M. and Huang, Y.F. and El-Shafie, A. and Shatirah, A. (2015) Application of the generalized likelihood uncertainty estimation (GLUE) approach for assessing uncertainty in hydrological models: A review. Stochastic Environmental Research and Risk Assessment, 29 (5). pp. 1265-1273. ISSN 1436-3240

Mishima, T. and Morinaga, S. and Nakaoka, M. (2016) Single-Stage ZVS-PWM AC-AC Power Converter Using All SiC Power Module for High-Frequency Induction Heating Applications. IEEJ Transactions on Industry Applications, 136 (7). pp. 464-470. ISSN 0913-6339

Mjalli, F.S. and Hussain, M.A. (2009) Approximate predictive versus self-tuning adaptive control strategies of biodiesel reactors. Industrial & Engineering Chemistry Research, 48 (24). pp. 11034-11047. ISSN 0888-5885

Mjalli, F.S. and San, L.K. and Yin, K.C. and Hussain, M.A. (2009) Dynamics and control of a biodiesel transesterification reactor. Chemical Engineering & Technology, 32 (1). pp. 13-26. ISSN 0930-7516

Mo, K.H. and Alengaram, U.J. and Visintin, P. and Goh, S.H. and Jumaat, M.Z. (2015) Influence of lightweight aggregate on the bond properties of concrete with various strength grades. Construction and Building Materials, 84. pp. 377-386. ISSN 0950-0618

Mo, K.H. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Yap, S.P. (2015) Feasibility study of high volume slag as cement replacement for sustainable structural lightweight oil palm shell concrete. Journal of Cleaner Production, 91. pp. 297-304. ISSN 0959-6526

Mo, K.H. and Visintin, P. and Alengaram, U.J. and Jumaat, M.Z. (2016) Bond stress-slip relationship of oil palm shell lightweight concrete. Engineering Structures, 127. pp. 319-330. ISSN 0141-0296

Mo, K.H. and Yeoh, K.H. and Bashar, I.I. and Alengaram, U.J. and Jumaat, M.Z. (2017) Shear behaviour and mechanical properties of steel fibre-reinforced cement-based and geopolymer oil palm shell lightweight aggregate concrete. Construction and Building Materials, 148. pp. 369-375. ISSN 0950-0618

Mo, Kim Hung and Lee, Hong Jie and Liu, Michael Yong Jing and Ling, Tung Chai (2018) Incorporation of expanded vermiculite lightweight aggregate in cement mortar. Construction and Building Materials, 179. pp. 302-306. ISSN 0950-0618

Mo, Kim Hung and Loh, Zhi Pin and Tan, Chee Ghuan and Alengaram, Ubagaram Johnson and Yap, Soon Poh (2018) Behaviour of fibre-reinforced cementitious composite containing high-volume fly ash at elevated temperatures. Sadhana, 43 (11). p. 177. ISSN 0256-2499

Mo, Kim Hung and Mohd Anor, Fatin Amirah and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Rao, K. Jagannadha (2018) Properties of metakaolin-blended oil palm shell lightweight concrete. European Journal of Environmental and Civil Engineering, 22 (7). pp. 852-868. ISSN 2116-7214

Mo, Kim Hung and Yeap, Kee Wei and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Bashar, Iftekhair Ibnul (2018) Bond strength evaluation of palm oil fuel ash-based geopolymer normal weight and lightweight concretes with steel reinforcement. Journal of Adhesion Science and Technology, 32 (1). pp. 19-35. ISSN 0169-4243

Mofachirul, I. and Roslan, H. and Saiful Islam, A.B.M. (2013) Behaviour of peat-added composite bricks in low cost building construction. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Mofijur, M. and Masjuki, Haji Hassan and Kalam, M.A. and Rahman, S.M.A. and Mahmudul, H.M. (2015) Energy scenario and biofuel policies and targets in ASEAN countries. Renewable & Sustainable Energy Reviews, 46. pp. 51-61. ISSN 1364-0321

Moghaddam, T.B. and Karim, M.R. and Abdelaziz, M. (2011) A review on fatigue and rutting performance of asphalt mixes. Scientific Research and Essays, 6 (4). pp. 670-682. ISSN 19922248

Moghaddam, T.B. and Karim, M.R. and Soltani, M. (2013) Utilization of waste plastic bottles in asphalt mixture. Journal of Engineering Science and Technology, 8 (3). pp. 264-271. ISSN 18234690

Moghavvemi, M. (1999) Sectionalized ANN approach in predicting voltage stability in power systems. International Journal of Power and Energy Systems, 19 (1). pp. 66-70. ISSN 10783466

Moghavvemi, M. and Attaran, A. (2011) Design and analysis of a SAW gas sensor based LF RFID tag in 0.18 um CMOS process. Sensors and Transducers, 130 (7). pp. 155-162. ISSN 17265479

Moghavvemi, M. and Attaran, A. (2011) Design of a low voltage 0.18 um CMOS Surface Acoustic Wave gas sensor. Sensors and Transducers, 125 (2). pp. 22-29. ISSN 17265479

Moghavvemi, M. and Attaran, A. (2011) Performance review of high-quality-factor, low-noise, and wideband radio-frequency LC-VCO for wireless communication. IEEE Microwave Magazine, 12 (4). pp. 130-146.

Moghavvemi, M. and Attaran, A. (2011) Recent advances in delay cell VCOs [application notes]. IEEE Microwave Magazine, 12 (5). pp. 110-118. ISSN 15273342

Moghavvemi, M. and Attaran, A. and Moshrefpour Esfahani, M.H. (2011) EEG artifact signals tracking and filtering in real time for command control application. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 20-23 June 2011, Kuala Lumpur.

Moghavvemi, M. and Chiang, C.Y. (2011) Insulation coordination associated with distributed generation connected at distribution level. International Journal of Electrical Power & Energy Systems, 33 (4). pp. 1077-1091. ISSN 0142-0615

Moghavvemi, M. and Faruque, M.O. (2000) Effects of facts devices on static voltage stability. In: IEEE Region 10 Annual International Conference, Proceedings/TENCON, 24 - 27 September 2000, Kuala Lumpur, Malaysia.

Moghavvemi, M. and Faruque, M.O. (1999) Power system security and voltage collapse: a line outage based indicator for prediction. International Journal of Electrical Power & Energy Systems, 21 (6). pp. 455-461. ISSN 0142-0615

Moghavvemi, M. and Faruque, M.O. (2001) Technique for assessment of voltage stability in Ill-conditioned radial distribution network. Power Engineering Review, 21 (1). pp. 58-60. ISSN 02721724

Moghavvemi, M. and Faruque, M.O. and Eng, N.K. and Yip, S.C. (2001) A simple low cost data acquisition system for remote sensing of relative humidity and temperature. In: 2001 Midwest Symposium on Circuits and Systems (MWSCAS 2001), 24 - 17 August 2001, Dayton, OH; United States.

Moghavvemi, M. and Faruque, O. (1998) Real-time contingency evaluation and ranking technique. Generation, Transmission and Distribution, 145 (5). pp. 517-523. ISSN 3502360

Moghavvemi, M. and Ismail, M.S. and Murali, B. and Yang, S.S. and Attaran, A. and Moghavvemi, S. (2013) Development and optimization of a PV/diesel hybrid supply system for remote controlled commercial large scale FM transmitters. Energy Conversion and Management, 75. pp. 542-551. ISSN 01968904

Moghavvemi, M. and Jamuar, S.S. and Gan, E.H. and Yap, Y.C. (2012) Design of low cost flexible RGB color sensor. In: 2012 1st International Conference on Informatics, Electronics and Vision, ICIEV 2012, 18-19 May 2012, Dhaka, Bangladesh.

Moghavvemi, M. and Jasmon, G.B. (1996) An artificial neural network aided solution to the problem of voltage stability in power systems. International Journal of Power and Energy Systems, 16 (3). pp. 130-134. ISSN 1078-3466

Moghavvemi, M. and Mehrkanoon, S. (2009) Detection of the onset of epileptic seizure signal from scalp EEG using blind signal separation. Biomedical Engineering - Applications, Basis and Communications, 21 (4). pp. 287-290. ISSN 10162372

Moghavvemi, M. and Ng, K.E. and Soo, C.Y. (2000) Remote sensing of relative humidity. In: IEEE Region 10 Annual International Conference, Proceedings/TENCON, 24 - 27 September 2000, Kuala Lumpur, Malaysia.

Moghavvemi, M. and Ng, K.E. and Soo, C.Y. and Tan, S.Y. (2005) A reliable and economically feasible remote sensing system for temperature and relative humidity measurement. Sensors and Actuators A: Physical, 117 (2). pp. 181-185. ISSN 0924-4247

Moghavvemi, M. and Omar, F.M. (1998) Technique for contingency monitoring and voltage collapse prediction. Generation, Transmission and Distribution, 145 (6). pp. 634-640. ISSN 1350-2360

Moghavvemi, M. and Omar, F.M. (1998) A line outage study for prediction of static voltage collapse. IEEE Power Engineering Review, 18 (8). pp. 52-54. ISSN 02721724

Moghavvemi, M. and Seng, L.C. (2004) Pyroelectric infrared sensor for intruder detection. In: IEEE TENCON 2004 - 2004 IEEE Region 10 Conference: Analog and Digital Techniques in Electrical Engineering, 21 - 24 November 2004, Chiang Mai,Thailand.

Moghavvemi, M. and Tan, B.H. and Tan, S.Y. (2013) A non-invasive PC-based measurement of fetal phonocardiography. Sensors and Actuators A: Physical, 107 (1). pp. 96-103. ISSN 0924-4247

Moghavvemi, M. and Tan, S.Y. and Wong, S.K. (2005) A reliable and economically feasible automatic meter reading system using power line distribution network. International Journal of Engineering, Transactions B: Applications, 18 (3). pp. 301-318. ISSN 10252495

Moghavvemi, M. and Yang, S.S. (2000) ANN application techniques for power system stability estimation. Electric Machines and Power Systems, 28 (2). pp. 167-178. ISSN 0731356X

Moghavvemi, M. and Yang, S.S. (2000) ANN application techniques for power system stability estimation. Electric Power Components and Systems, 28 (2). pp. 167-177. ISSN 15325008

Moghavvemi, M. and Yang, S.S. and Kashem, M.A. (1998) Practical neural network approach for power generation automation. In: Proceedings of the 1998 2nd International Conference on Energy Management and Power Delivery (EMPD'98), 3 - 5 March 1998, Singapore.

Moghavvemi, S. and Salleh, N.A.M. and Sulaiman, A. and Abessi, M. (2015) Effect of external factors on intention-behaviour gap. Behaviour & Information Technology, 34 (12, SI). pp. 1171-1185. ISSN 0144-929X

Mohamad, H. and Bakar, A.H.A. and Ping, H.W. and Mokhlis, Hazlie (2010) An adaptive controller of hydro generators for smart grid application in Malaysia. In: Power System Technology (POWERCON), 2010 International Conference on, 2010.

Mohamad, H. and Mokhlis, H. and Abu Bakar, A. and Ping, H.W. (2011) A review on islanding operation and control for distribution network connected with small hydro power plant. Renewable & Sustainable Energy Reviews, 15 (8). pp. 3952-3962. ISSN 1364-0321

Mohamad, N.Z. and Hamzaid, N.A. and Davis, G.M. and Wahab, A.K.A. and Hasnan, N. (2017) Mechanomyography and Torque during FES-Evoked Muscle Contractions to Fatigue in Individuals with Spinal Cord Injury. Sensors, 17 (7). p. 1627. ISSN 1424-8220

Mohamed, A.H. and Moghavvemi, M. and Ibrahim, W.M.A.W. (2008) A new device to measure the changes in blood volume during pulseatile cycle non-invasively. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 25 - 28 June 2008, Kuala Lumpur, Malaysia.

Mohamed, A.H. and Moghavvemi, M. and Wan Ibrahim, W.M.A. (2008) Measurement of Artery Stiffness Index (ASI) using blood volume pulse. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 25 - 28 June 2008, Kuala Lumpur, Malaysia.

Mohamed, H.A.F. and Askari, M. and Moghavvemi, M. and Yang, S.S. (2008) Nonlinear system identification by fuzzy piecewise affine models. In: SICE Annual Conference 2008 - International Conference on Instrumentation, Control and Information Technology, 20 - 22 August 2008, Tokyo, Japan.

Mohamed, H.A.F. and Hassan, L.H. and Moghavvemi, M. and Yang, S.S. (2008) Load frequency controller design for Iraqi National Super Grid System using Fuzzy logic controller. In: SICE Annual Conference 2008 - International Conference on Instrumentation, Control and Information Technology, 20 - 22 August 2008, Tokyo,Japan.

Mohamed, H.A.F. and Lau, E.L. and Moghavvemi, M. and Yang, S.S. (2008) Reduced chatter bang-bang-like SMC flux and speed control of induction motor. In: SICE Annual Conference 2008 - International Conference on Instrumentation, Control and Information Technology, 20 - 22 August 2008, Tokyo, Japan.

Mohamed, H.A.F. and Lau, E.L. and Yang, S.S. and Moghavvemi, M. (2008) Fuzzy-SMC-PI flux and speed control for induction motors. In: 2008 IEEE International Conference on Robotics, Automation and Mechatronics, RAM 2008, 21 - 24 September 2008, Chengdu,China.

Mohamed, H.A.F. and Yahya, S. and Moghavvemi, M. and Yang, S.S. (2009) A new inverse kinematics method for three dimensional redundant manipulators. In: ICROS-SICE International Joint Conference 2009, ICCAS-SICE 2009, 18-21 August 2009, Fukuoka, Japan.

Mohamed, H.A.F. and Yang, S.S. and Moghavvemi, M. (2008) Design and real-time implementation of an internal model speed control for an induction motor. In: 2008 IEEE International Conference on Robotics, Automation and Mechatronics, RAM 2008, 21 - 24 September 2008, Chengdu,China.

Mohamed, H.A.F. and Yang, S.S. and Moghavvemi, M. (2009) Improving induction motors speed and flux control using Fuzzy-SMC-PI. In: 2009 IEEE International Conference on Industrial Technology, ICIT 2009, 10-13 February 2009, Churchill, VIC, Australia.

Mohamed, H.A.F. and Yang, S.S. and Moghavvemi, M. (2008) Integral sliding mode control for improved robustness and accuracy of induction motors. In: 17th World Congress, International Federation of Automatic Control, IFAC, 6 - 11 July 2008, Seoul,South Korea.

Mohamed, H.A.F. and Yang, S.S. and Moghavvemi, M. (2009) Sensorless fuzzy SMC for a permanent magnet synchronous motor. In: ICROS-SICE International Joint Conference 2009, ICCAS-SICE 2009, 18-21 August 2009, Fukuoka, Japan.

Mohamed, H.A.F. and Yang, S.S. and Moghavvemi, M. (2009) Sliding mode controller design for a flying quadrotor with simplified action planner. In: ICROS-SICE International Joint Conference 2009, ICCAS-SICE 2009, 18-21 August 2009, Fukuoka, Japan.

Mohamed, H.A.F. and Yang, S.S. and Moghavvemi, M. (2008) Sliding mode sensor fault tolerant control structure for induction motor. In: SICE Annual Conference 2008 - International Conference on Instrumentation, Control and Information Technology, 20 - 22 August 2008, Tokyo, Japan.

Mohamed Saaid, M.F. and Wan Abas, Wan Abu Bakar and Arof, Hamzah and Mokhtar, N. and Ramli, R. and Ibrahim, Z. (2011) Change point detection of EEG signals based on particle swarm optimization. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Mohamed Saaid, M.F. and Wan Abas, Wan Abu Bakar and Arof, Hamzah and Mokhtar, Norrima and Ramli, R. and Ibrahim, Z. (2011) Change point detection of EEG signals based on particle swarm optimization. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Mohammad, M. and Jumaat, M.Z. and Chemrouk, M. and Ghasemi, A. and Hakim, S.J.S. and Najmeh, R. (2011) An experimental investigation of the stress-strain distribution in high strength concrete deep beams. In: 12th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC12, 2011, Hong Kong.

Mohammad Jafari, M. and Ahmed, S. and Md Dawal, S.Z. (2010) The relationship between project management and e-collaboration. In: International Conference on Industrial Engineering and Operations Management (IEOM2010) , January 9-10, Dhaka, Bangladesh.

Mohammadhassani, M. and Jumaat, M.Z. and Ashour, A. and Jameel, M. (2011) Failure modes and serviceability of high strength self compacting concrete deep beams. Engineering Failure Analysis, 18 (8). pp. 2272-2281. ISSN 1350-6307

Mohammadhassani, M. and Jumaat, M.Z. and Chemrouk, M. and Maghsoudi, A.A. and Jameel, M. and Akib, S. (2011) An experimental investigation on bending stiffness and neutral axis depth variation of over-reinforced high strength concrete beams. Nuclear Engineering and Design, 241 (6). pp. 2060-2067. ISSN 0029-5493

Mohammadhassani, M. and Jumaat, M.Z. and Jameel, M. (2012) Experimental investigation to compare the modulus of rupture in high strength self compacting concrete deep beams and high strength concrete normal beams. Construction and Building Materials, 30. pp. 265-273. ISSN 0950-0618

Mohammadhassani, M. and Jumaat, M.Z. and Jameel, M. and Badiee, H. and Arumugam, A.M.S. (2012) Ductility and performance assessment of high strength self compacting concrete (HSSCC) deep beams: an experimental investigation. Nuclear Engineering and Design, 250. pp. 116-124. ISSN 0029-5493

Mohammadhassani, M. and Jumaat, M.Z. and Jameel, M. and Hakim, S.J.S. and Abdollahi, N. (2012) Experimental study on the strain contribution of horizontal and vertical web reinforced bar of HSSCC deep beams. In: 5th International Conference on Emerging Technologies in Non-Destructive Testing, NDT, 2012, Ioannina.

Mohammadhassani, M. and Jumaat, M.Z. and Maghsoudi, A.A. and Akib, S. and Mohamed, J. and Najmeh, R. and Amin, M. and Hamid, S. and Esmaeil, H.R. and Farhad, G. (2011) Bending stiffness and neutral axis depth variation of high strength concrete beams in seismic hazardous areas: experimental investigation. International Journal of the Physical Sciences, 6 (3). pp. 482-494. ISSN 1992-1950

Mohammadi, A.M. and Abdullah, M.K. and Mahdiraji, G.A. and Abas, A.F. and Mokhtar, M. (2008) Complementary unipolar duty cycle division multiplexing (CUDCDM) technique for wireless communications. In: Proceedings of the Fifth IASTED International Conference on Communication Systems and Networks, 2008.

Mohammadi, P. and Ibrahim, S. and Annuar, M.S.M. (2012) Comparative study on the effect of various pretreatment methods on the enrichment of hydrogen producing bacteria in anaerobic granulated sludge from brewery wastewater. Korean Journal of Chemical Engineering, 29 (10). pp. 1347-1351. ISSN 0256-1115

Mohammadi, P. and Ibrahim, S. and Annuar, M.S.M. (2014) High-rate fermentative hydrogen production from palm oil mill effluent in an up-flow anaerobic sludge blanket-fixed film reactor. Chemical Engineering Research and Design, 92 (10). pp. 1811-1817. ISSN 0263-8762

Mohammadi, P. and Ibrahim, S. and Annuar, M.S.M. and Ghafari, S. and Vikineswary, S. and Zinatizadeh, A.A. (2012) Influences of environmental and operational factors on dark fermentative hydrogen production: a review. Clean-Soil Air Water, 40 (11). pp. 1297-1305. ISSN 1863-0650

Mohammadi, P. and Ibrahim, S. and Annuar, M.S.M. and Khashij, M. and Mousavi, S.A. and Zinatizadeh, A.A. (2017) Optimization of fermentative hydrogen production from palm oil mill effluent in an up-flow anaerobic sludge blanket fixed film bioreactor. Sustainable Environment Research, 27 (5). pp. 238-244. ISSN 2468-2039

Mohammadi, P. and Ibrahim, S. and Mohamad Annuar, M.S. (2012) Effects of biomass, COD and bicarbonate concentrations on fermentative hydrogen production from POME by granulated sludge in a batch culture. International Journal of Hydrogen Energy, 37 (23). pp. 17801-17808. ISSN 0360-3199

Mohammadi, P. and Ibrahim, Shaliza and Annuar, M.S.M. and Law, S. (2011) Effects of different pretreatment methods on anaerobic mixed microflora for hydrogen production and COD reduction from palm oil mill effluent. Journal of Cleaner Production, 19 (14). pp. 1654-1658. ISSN 0959-6526

Mohammadian, E. and Hamidi, H. and Asadullah, M. and Azdarpour, A. and Motamedi, S. and Junin, R. (2015) Measurement of CO2 solubility in NaCl brine solutions at different temperatures and pressures using the potentiometric titration method. Journal of Chemical and Engineering Data, 60 (7). pp. 2042-2049. ISSN 0021-9568

Mohammadnejad, M. and Ghazvini, M. and Javadi, F.S. and Saidur, R. (2011) Estimating the exergy efficiency of engine using nanolubricants. Energy Education Science and Technology Part A: Energy Science and Research, 27 (2). pp. 447-454. ISSN 1308-772X

Mohammed, H.A. and Al-Aswadi, A.A. and Shuaib, N.H. and Saidur, R. (2011) Convective heat transfer and fluid flow study over a step using nanofluids: A review. Renewable and Sustainable Energy Reviews, 15 (6). pp. 2921-2939. ISSN 1364-0321

Mohammed, H.A. and Al-Aswadi, A.A. and Yusoff, M.Z. and Saidur, R. (2012) Buoyancy-assisted mixed convective flow over backward-facing step in a vertical duct using nanofluids. Thermophysics and Aeromechanics, 19 (1). pp. 33-52. ISSN 0869-8643

Mohammed, H.A. and Al-Aswadi, A.A. and Yusoff, M.Z. and Saidur, R. (2012) Buoyancy-assisted mixed convective flow over backward-facing step in a vertical duct using nanofluids. Thermophysics and Aeromechanics, 19 (1). pp. 33-52. ISSN 0869-8643

Mohammed, H.A. and Bhaskaran, G. and Shuaib, N.H. and Abu-Mulaweh, H.I. and Saidur, R. (2012) Thermal and hydrodynamic performance analysis of circular microchannel heat exchanger utilizing nanofluids. International Journal of Numerical Methods for Heat & Fluid Flow, 22 (6-7). pp. 907-927. ISSN 0961-5539

Mohammed, H.A. and Bhaskaran, G. and Shuaib, N.H. and Saidur, R. (2011) Heat transfer and fluid flow characteristics in microchannels heat exchanger using nanofluids: A review. Renewable and Sustainable Energy Reviews, 15 (3). pp. 1502-1512. ISSN 1364-0321

Mohammed, H.A. and Bhaskaran, G. and Shuaib, N.H. and Saidur, Rahman (2011) Numerical study of heat transfer enhancement of counter nanofluids flow in rectangular microchannel heat exchanger. Superlattices and Microstructures, 50 (3). pp. 215-233. ISSN 0749-6036

Mohammed, H.A. and Campo, A. and Saidur, R. (2010) Experimental study of forced and free convective heat transfer in the thermal entry region of horizontal concentric annuli. International Communications in Heat and Mass Transfer, 37 (7). pp. 739-747. ISSN 0735-1933

Mohammed, H.A. and Om, N.I. and Shuaib, N.H. and Hussein, A.K. and Saidur, R. (2011) The application of nanofluids on three dimensional mixed convection heat transfer in equilateral triangular duct. International Journal of Heat and Technology, 29 (2). pp. 3-12. ISSN 03928764

Mohammed, H.A. and Om, N.I. and Shuaib, N.H. and Saidur, R. (2011) Heat transfer enhancement for combined convection flow of nanofluids in a vertical rectangular duct considering radiation effects. Heat Transfer - Asian Research, 40 (5). pp. 448-463. ISSN 10992871

Mohammed, M.M. and Hashim, Roslan and Salman, F.A. (2011) Improvement in physical properties for ground treated with rapid impact compaction. International Journal of Physical Sciences, 6 (22). pp. 5133-5140. ISSN 19921950

Mohammed, S.A. and Abdullah, E.C. and Geldart, D. and Abdul Raman, A.A. (2011) Measuring powder flowability with a modified Warren Spring cohesion tester. Particuology, 9 (2). pp. 148-154. ISSN 1674-2001

Mohammed Mohammed, M. and Hashim, Roslan and Firas Salman, A. (2010) Effective improvement depth for ground treated with rapid impact compaction. Scientific Research and Essays, 5 (18). pp. 2686-2693. ISSN 19922248

Mohd, S. and Samsuddin, S.M. and Ramalingam, S. and Min, N.W. and Yusof, N. and Zaman, T.K. and Mansor, A. (2015) Assessing bone banking activities at University of Malaya medical centre. Cell and Tissue Banking, 16 (4). pp. 523-530. ISSN 1389-9333

Mohd Daud, S.N.H. and Haw, C.Y. and Chiu, W.S. and Aspanut, Z. and Chia, M.Y. and Khanis, N.H. and Khiew, P. and Hamid, M.A.A. (2016) ZnO nanonails: Organometallic synthesis, self-assembly and enhanced hydrogen gas production. Materials Science in Semiconductor Processing, 56. pp. 228-237. ISSN 1369-8001

Mohd Izzudin Izzat, Z.A. and Abdul Aziz, A.R. and Mohamad Nor, M.N. (2013) Liquid-liquid dispersion: effects of dispersed phase viscosity on mean drop size and distribution in stirred vessel. In: Hong Kong International Conference on Engineering and Applied Science, 9-22 December 2013, Hong Kong.

Mohd Said, S. and Chow, Chee-Onn and Mokhtar, N. and Ramli, R. and Tuan Ya, T.M.Y.S. and Mohd Sabri, M.F. (2011) Accreditation of engineering programs: an evaluation of current practices in Malaysia. International Journal of Technology and Design Education. pp. 1-16. ISSN 0957-7572

Mohiuddin, A.K.M. and Saidur, R. and Sattar, M.A. and Rahman, A. (2007) Comparison of drift eliminators characteristics in evaporative condenser and spray-filled tower. International Energy Journal, 8 (3). pp. 155-162. ISSN 1513718X

Mohktar, M.S. and Ibrahim, F. (2008) Assessment of salat taraweeh and fasting effect on body composition. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Mohktar, M.S. and Ibrahim, F. and Ismail, N.A. (2005) Bioelectrical impedance analysis in assessing the chances of obtaining coronary heart disease in obese subjects. In: 2005 Asian Conference on Sensors and the International Conference on new Techniques in Pharmaceutical and Biomedical Research, 2005, Kuala Lumpur.

Mohktar, M.S. and Ibrahim, F. and Ismail, N.A. (2013) Non-invasive approach to predict the cholesterol level in blood using bioimpedance and neural network techniques. Biomedical Engineering - Applications, Basis and Communications, 25 (06). p. 1350046. ISSN 1793-7132

Mohseni, E. and Zalnezhad, E. and Bushroa, A.R. (2014) Comparative investigation on the adhesion of hydroxyapatite coating on Ti–6Al–4V implant: A review paper. International Journal of Adhesion and Adhesives, 48. pp. 238-257. ISSN 0143-7496

Mokhlis, H. and Awalin, L.J. and Bakar, A.H.A. and Illias, H.A. (2014) Fault location estimation method by considering measurement error for distribution networks. International Transactions on Electrical Energy Systems, 24 (9). pp. 1244-1262. ISSN 2050-7038

Mokhlis, H. and Bakar, A.H.A. and Illias, H.A. and Shafie, M.F. (2012) Insulation coordination study of 275kV AIS substation in Malaysia. In: 2012 Asia-Pacific Power and Energy Engineering Conference, APPEEC 2012, 2012, Shanghai.

Mokhlis, H. and Bakar, A.H.A. and Talib, D.N.A. and Mohamad, H. (2010) The improvement of voltage sags pattern approach to locate a fault in distribution network. International Review of Electrical Engineering-Iree, 5 (3). pp. 1159-1164. ISSN 1827-6660

Mokhlis, H. and Karimi, M. and Halim, A.H.A. (2013) Under-frequency load shedding for islanded distribution network. In: AUN/SEED-Net RC-EEE / ISMAC, 4-5 Feb 2013, Bangkok, Thailand.

Mokhlis, H. and Karimi, M. and Shahriari, A. and Abu Bakar, A.H. and Laghari, J.A. (2013) A new under-frequency load shedding scheme for islanded distribution network. In: IEEE PES Innovative Smart Grid Technologies (ISGT), 24-27 Feb 2013, IEEE.

Mokhlis, H. and Laghari, J.A. and Bakar, A.H.A. and Karimi, M. (2012) A fuzzy Based Under-Frequency Load Shedding Scheme for islanded distribution network connected with DG. International Review of Electrical Engineering-Iree, 7 (4). pp. 4992-5000. ISSN 1827-6660

Mokhlis, H. and Leghari, J.H. and Abu Bakar, A.H. (2013) A fuzzy based load shedding scheme for an islanded distribution network. In: Proceedings of the IASTED International Conference Power and Energy Systems (AsiaPES 2013), 10-12 Apr 2013, Phuket, Thailand.

Mokhlis, H. and Li, H.Y. (2011) Non-linear representation of voltage sag profiles for fault location in distribution networks. International Journal of Electrical Power & Energy Systems, 33 (1). pp. 124-130. ISSN 0142-0615

Mokhlis, H. and Li, H.Y. and Khalid, A.R. (2010) The application of voltage sags pattern to locate a faulted section in distribution network. International Review of Electrical Engineering-Iree, 5 (1). pp. 173-179. ISSN 1827-6660

Mokhlis, H. and Li, H.Y. and Mohamad, H. and Bakar, A.H.A. (2010) A comprehensive fault location estimation using voltage sag profile for non-homogenous distribution networks. International Review of Electrical Engineering-Iree, 5 (5). pp. 2310-2316. ISSN 1827-6660

Mokhlis, H. and Mohamad, H. and Bakar, A.H.A. and Li, H.Y. (2011) Evaluation of fault location based on voltage sags profiles: a study on the influence of voltage sags patterns. International Review of Electrical Engineering-Iree, 6 (2). pp. 874-880. ISSN 1827-6660

Mokhlis, H. and Mohamad, H. and Li, H.Y. and Abu Bakar, A. (2011) Voltage sags matching to locate faults for underground distribution networks. Advances in Electrical and Computer Engineering, 11 (2). pp. 43-48. ISSN 1582-7445

Mokhlis, H. and Nor, K.M. (2004) Implementation of UPFC model into fast decoupled load flow. In: TENCON 2004. 2004 IEEE Region 10 Conference, 2004.

Mokhlis, H. and Nor, K.M. (2003) Object oriented sparse linear solver component for power system analysis. In: Power Engineering Conference, 2003. PECon 2003. Proceedings. National, 2013.

Mokhlis, H. and Shahriari, A. and Bakar, A.H.A. and Illias, H.A. and Karimi, M. (2014) Improved Step Size Newton Raphson Method using quadratic equations properties in ill-conditioned power system. International Transactions on Electrical Energy Systems, 24 (9). pp. 1323-1342. ISSN 2050-7038

Mokhlis, Hazlie and Khalid, A.R. and Li, H.Y. (2006) Development of automated fault location software for distribution network. In: Power and Energy Conference, 2006. PECon'06. IEEE International, 2016, Putrajaya, Malaysia..

Mokhlis, Hazlie and Li, H.Y. (2007) Fault location estimation for distribution system using simulated voltage sags data. In: Universities Power Engineering Conference, 2007. UPEC 2007. 42nd International, 2007.

Mokhlis, Hazlie and Li, H.Y. and Bakar, A.H.A. and Mohamad, H. (2010) Locating fault using voltage sags profile for underground distribution system. In: Power System Technology (POWERCON), 2010 International Conference on, 2010.

Mokhtar, N. and Sugisaka, M. and Lung, L.T. and Hamzah, A. and Mubin, M. and Md Shah, N. (2008) Positioning and navigation of mobile robot. Artificial Life and Robotics, 13 (1). pp. 255-258. ISSN 1433-5298

Mokhtar, Norrima and Arof, Hamzah and Adikan, Faisal Rafiq Mahamd and Mubin, M. (2011) Real time noise-speech discrimination in time domain for speech recognition application. Scientific Research and Essays, 6 (1). pp. 18-22. ISSN 19922248

Mokhtar, Norrima and Arof, Hamzah and Iwahashi, M. (2010) One dimensional image processing for eye tracking using derivative dynamic time warping. Scientific Research and Essays, 5 (19). pp. 2947-2952. ISSN 1992-2248

Monajemi, H. and Abdul Razak, H. (2008) The effect of external wings on the behavior of suction anchor. In: 12th International Conference on Computer Methods and Advances in Geomechanics 2008, 2008, Goa.

Monajemi, H. and Abdul Razak, H. and Ismail, Z. (2012) Reliability of dynamically measured flexibility matrix on damage detection of frame structures. In: 30th IMAC, A Conference on Structural Dynamics, 2012, 2012, Jacksonville, FL.

Monajemi, H. and Mazinani, I. and Chao, O.Z. and Yee, K.S. and Kuan, K.K. and Karim, R. (2015) Using local stiffness indicator to examine the effect of honeycombs on the flexural stiffness of reinforced concrete beams. Measurement, 64. pp. 157-162. ISSN 0263-2241

Monajemi, H. and Razak, H.A. (2009) Finite element modeling of suction anchors under combined loading. Marine Structures, 22 (4). pp. 660-669. ISSN 0951-8339

Monajemi, H. and Razak, H.A. and Ismail, Z. (2013) Damage detection in frame structures using damage locating vectors. Measurement: Journal of the International Measurement Confederation, 46 (9). pp. 3541-3548. ISSN 0263-2241

Moo, E.K. and Abu Osman, Noor Azuan and Pingguan-Murphy, Belinda (2011) The metabolic dynamics of cartilage explants over a long-term culture period. Clinics, 66 (8). pp. 1431-1436. ISSN 1807-5932

Moo, E.K. and Abu Osman, Noor Azuan and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar and Spence, W.D. and Solomonidis, S.E. (2009) Interface pressure profile analysis for patellar tendon-bearing socket and hydrostatic socket. Acta of Bioengineering and Biomechanics, 11 (4). pp. 37-43. ISSN 1509-409X

Moo, E.K. and Abu Osman, Noor Azuan and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar and Spence, W.D. and Solomonidis, S.E. (2009) Interface pressure profile analysis for patellar tendon-bearing socket and hydrostatic socket. Acta of Bioengineering and Biomechanics, 11 (4). pp. 37-43. ISSN 1509-409X

Moo, E.K. and Herzog, W. and Han, S.K. and Abu Osman, Noor Azuan and Pingguan-Murphy, Belinda and Federico, S. (2012) Mechanical behaviour of in-situ chondrocytes subjected to different loading rates: a finite element study. Biomechanics and Modeling in Mechanobiology, 11 (7). pp. 983-993. ISSN 1617-7940

Mook, W.T. and Aroua, M.K. and Chakrabarti, M.H. and Low, C.T.J. and Aravind, P.V. and Brandon, N.P. (2013) The application of nano-crystalline PbO2 as an anode for the simultaneous bio-electrochemical denitrification and organic matter removal in an up-flow undivided reactor. Electrochimica Acta, 94. pp. 327-335. ISSN 0013-4686

Mook, W.T. and Aroua, Mohamed Kheireddine and Chakrabarti, M.H. and Noor, I.M. and Irfan, M.F. and Low, C.T.J. (2013) A review on the effect of bio-electrodes on denitrification and organic matter removal processes in bio-electrochemical systems. Journal of Industrial and Engineering Chemistry, 19 (1). pp. 1-13. ISSN 1226-086X

Mook, W.T. and Chakrabarti, M.H. and Aroua, M.K. and Khan, G.M.A. and Ali, B.S. and Islam, M.S. and Abu Hassan, M.A. (2012) Removal of total ammonia nitrogen (TAN), nitrate and total organic carbon (TOC) from aquaculture wastewater using electrochemical technology: A review. Desalination, 285. pp. 1-13. ISSN 0011-9164

Morshed, Muhammad Monzur and Haseeb, A.S. Md. Abdul (2004) Physical and chemical characteristics of commercially available brake shoe lining materials: a comparative study. Journal of Materials Processing Technology, 155. pp. 1422-1427. ISSN 0924-0136

Motamedi, S. and Song, K.I. and Hashim, Roslan (2013) Prediction of unconfined compressive strength of pulverized fuel ash-cement-sand mixture. Materials and Structures. pp. 1-13. ISSN 13595997

Motasemi, F. and Afzal, M.T. and Salema, A.A. and Moghavvemi, M. and Shekarchian, M. and Zarifi, F. and Mohsin, R. (2014) Energy and exergy utilization efficiencies and emission performance of Canadian transportation sector, 1990-2035. Energy, 46. pp. 355-366. ISSN 0360-5442

Mounes, S.M. and Karim, M.R. and Mahrez, A. and Khodaii, A. (2011) An overview on the use of geosynthetics in pavement structures. Scientific Research and Essays, 6 (11). pp. 2251-2258. ISSN 19922248

Mousavi, S. and Ibrahim, S. and Aroua, M.K. (2013) Effects of operational parameters on the treatment of nitrate-rich wastewater by autohydrogenotrophic denitrifying bacteria. Water and Environment Journal. pp. 1-10. ISSN 17476585

Mousavi, S. and Ibrahim, S. and Aroua, M.K. (2012) Sequential nitrification and denitrification in a novel palm shell granular activated carbon twin-chamber upflow bio-electrochemical reactor for treating ammonium-rich wastewater. Bioresource Technology, 125. pp. 256-266. ISSN 0960-8524

Mousavi, S. and Ibrahim, S. and Aroua, M.K. (2012) Sequential nitrification and denitrification in a novel palm shell granular activated carbon twin-chamber upflow bio-electrochemical reactor for treating ammonium-rich wastewater. Bioresource Technology, 125. pp. 256-266. ISSN 0960-8524

Mousavi, S. and Ibrahim, S. and Aroua, M.K. and Ghafari, S. (2012) Development of nitrate elimination by autohydrogenotrophic bacteria in bio-electrochemical reactors - A review. Biochemical Engineering Journal, 67. pp. 251-264. ISSN 1369-703X

Mousavi, S. and Ibrahim, S. and Aroua, M.K. and Ghafari, S. (2012) Development of nitrate elimination by autohydrogenotrophic bacteria in bio-electrochemical reactors - a review. Biochemical Engineering Journal, 67. pp. 251-264. ISSN 1369-703X

Mousavi, S.A.R. and Ibrahim, S. and Aroua, M.K. and Ghafari, S. (2011) Bio-electrochemical Denitrification -A review. International Journal of Chemical and Environmental Engineering, 2 (2). pp. 140-146. ISSN 2078-0737

Mousavi, Seyyed Alireza and Mehralian, Mohammad and Khashij, Maryam and Ibrahim, Shaliza (2018) Effect of air flow rate and C/N ratio on biological nitrogen removal through the CANON process treating reject water. Environmental Technology, 39 (22). pp. 2891-2899. ISSN 0959-3330

Mubarak, N.M. and Sahu, J.N. and Abdullah, E.C. and Jayakumar, N.S. and Ganesan, P. (2015) Microwave assisted multiwall carbon nanotubes enhancing Cd(II) adsorption capacity in aqueous media. Journal of Industrial and Engineering Chemistry, 24. pp. 24-33. ISSN 1226-086X

Mubin, A.S.A. and Ahmad, N. and Mamat, A. and Taha, Z. and Hasanuddin, I. (2015) CFD study of drag and lift of sepak takraw ball at different face orientations. Advances in Mechanical Engineering, 7 (1). p. 9. ISSN 1687-8132

Mubin, M. and Ouchi, S. and Kodani, N. and Mokhtar, N. and Soin, N. (2008) Stability of two-inertia system using non-linear controller: application to drive-control system of electric vehicle. In: 13th International Symposium on Artificial Life and Robotics, AROB 13th'08, 2008, Oita.

Mubin, M. and Ouchi, S. and Kodani, N. and Mokhtar, Norrima and Arof, Hamzah (2008) Control of vehicle driving model by non-linear controller. In: 2008 International Symposium on Communications and Information Technologies, ISCIT 2008, 2008, Vientiane.

Muhamad, M. and Soin, N. and Ramiah, H. and Noh, N.M. and Keat, C.W. (2011) A 0.13μm inductively degenerated cascode CMOS LNA at 2.14GHz. In: 2011 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2011, 25-28 Sep 2011, Langkawi.

Muhammad, B. and Ibrahim, Z. and Ghazali, K.H. and Ghazali, M.R. and Mubin, M. and Mokhtar, M. (2014) Performance evaluation of vector evaluated gravitational search algorithm II. In: 13th International Conference on Intelligent Software Methodologies, Tools, and Techniques, 22-24 Sep 2014, Langkawi, Malaysia.

Muhammad, B.M.Y. and Abdul Raman, A.A. (2011) Production of superlight saraline drill-in fluid. Chemistry and Technology of Fuels and Oils, 46 (6). pp. 401-404. ISSN 0009-3092

Muhammad, K.S. and Omar, A.M. and Mekhilef, S. (2007) Digital control of high DC voltage converter based on cockcroft walton voltage multiplier circuit. In: TENCON 2005 - 2005 IEEE Region 10 Conference, Melbourne.

Muhammad, K.S. and Omar, A.M. and Mekhilef, S. (2005) Single-phase single-stage high DC voltage multiplier converter. In: 2005 IEEE International Conference on Industrial Technology, ICIT 2005, Hong Kong.

Muhammad, M.Z. and Jasim, Ali Abdulhadi and Ahmad, Harith and Arof, Hamzah and Harun, Sulaiman Wadi (2013) Non-adiabatic silica microfiber for strain and temperature sensors. Sensors and Actuators A: Physical, 192. pp. 130-132. ISSN 0924-4247

Muhammad Sani, Y. and Daud, Wan Mohd Ashri Wan and Abdul Raman, A.A. (2014) Activity of solid acid catalysts for biodiesel production: A critical review. Applied Catalysis A General, 470. pp. 140-161. ISSN 0926-860X

Mujtaba, I.M. and Aziz, N. and Hussain, M.A. (2006) Neural network based modelling and control in batch reactor. Chemical Engineering Research & Design, 84 (A8). pp. 635-644. ISSN 0263-8762

Mujtaba, I.M. and Hussain, M.A. (2000) Computational-based framework for optimizing dynamic processes with plantmodel mismatch. Malaysian Journal of Computer Science, 13 (1). pp. 27-33. ISSN 01279084

Mujtaba, I.M. and Hussain, M.A. (1998) Optimal operation of dynamic processes under process-model mismatches: Application to batch distillation. Computers & Chemical Engineering, 22. S621-S624. ISSN 0098-1354

Mujtabaa, I.M. and Greaves, M.A. and Hussain, M.A. (2003) A quick efficient neural network based business decision making tool in batch reactive distillation. Computer Aided Chemical Engineering, 15. pp. 286-291. ISSN 1570-7946

Mukherjee, Sumona and Mukhopadhyay, Soumyadeep and Zafri, Muhammad Zakwan and Zhan, Xin Min and Hashim, Mohd Ali and Sen Gupta, Bhaskar (2018) Application of guar gum for the removal of dissolved lead from wastewater. Industrial Crops and Products, 111. pp. 261-269. ISSN 0926-6690

Mukhopadhyay, S. and Hashim, M.A. and Allen, M. and Sen Gupta, B. (2015) Arsenic removal from soil with high iron content using a natural surfactant and phosphate. International Journal of Environmental Science and Technology, 12 (2). pp. 617-632. ISSN 1735-1472

Mukhtar, S.R. and Shanmugam, S.A. and Ibrahim, F. (2005) Development of a control system for laser doppler imaging scanning technique using labview. In: 2005 1st International Conference on Computers, Communications and Signal Processing with Special Track on Biomedical Engineering, CCSP 2005, 2005, Kuala Lumpur.

Mukred, J.A.A. and Ibrahim, Z. and Ibrahim, I. and Adam, A. and Wan, K. and Yusof, Z.M. and Mokhtar, N. (2012) A binary particle swarm optimization approach to optimize assembly sequence planning. Advanced Science Letters, 13 (1). pp. 732-738. ISSN 19366612

Munawar, K. and Badrul, M.J. and Abdul Aziz, A.R. (2011) Preparation of a nontraditional ultralight fluid for increasing oil production using natural, ground, and acid-activated clay. Chemistry and Technology of Fuels and Oils, 46 (6). pp. 392-400. ISSN 00093092 (ISSN)

Munim, W.N.W.A. and Duran, M.J. and Che, H.S. and Bermudez, M. and Gonzalez-Prieto, I. and Rahim, N.A. (2017) A Unified Analysis of the Fault Tolerance Capability in Six-Phase Induction Motor Drives. IEEE Transactions on Power Electronics, 32 (10). pp. 7824-7836. ISSN 0885-8993

Muslimin, M. and Wilson, J.J. and Ghazali, A.R. and Braima, K.A. and Jeffery, J. and Wan-Nor, F. and Alaa-Eldin, M.E. and Mohd-Zin, S.W. and Wan-Yusoff, W.S. and Norma-Rashid, Y. and Lau, Y.L. and Rohela, M. and Abdul-Aziz, N.M. (2015) First report of brown widow spider sightings in Peninsular Malaysia and notes on its global distribution. Journal of Venomous Animals and Toxins including Tropical Diseases, 21. p. 8. ISSN 1678-9199

Mustayen, A.G.M.B. and Rahman, M.M. and Mekhilef, S. and Saidur, R. (2015) Performance evaluation of a solar powered air dryer for white oyster mushroom drying. International Journal of Green Energy, 12 (11). pp. 1113-1121. ISSN 1543-5075

N

NH, A.K. and Yahaya, N.A. and NA, A.O. and Kasim, N.L. (2008) Relationship of the light intensity of selected light curing units with varying distance and angulation of the light curing tip and lightmeter. Annals of Dentistry, 15 (1). pp. 33-39. ISSN 0128-7532

Nadia, A. and Haseeb, A.S. Md. Abdul (2012) Effects of addition of copper particles of different size to Sn-3.5Ag solder. Journal of Materials Science: Materials in Electronics, 23 (1). pp. 86-93. ISSN 0957-4522

Nadzir, Mohd Shahrul Mohd and Ashfold, Matthew J. and Khan, Md Firoz and Robinson, Andrew D. and Bolas, Conor and Latif, Mohd Talib and Wallis, Benjamin M. and Mead, Mohammed Iqbal and Hamid, Haris Hafizal Abdul and Harris, Neil R. P. and Ramly, Zamzam Tuah Ahmad and Lai, Goh Thian and Liew, Ju Neng and Ahamad, Fatimah and Uning, Royston and Samah, Azizan Abu and Maulud, Khairul Nizam and Suparta, Wayan and Zainudin, Siti Khalijah and Wahab, Muhammad Ikram Abdul and Sahani, Mazrura and Müller, Moritz and Yeok, Foong Swee and Rahman, Nasaruddin Abdul and Mujahid, Aazani and Morris, Kenobi Isima and Sasso, Nicholas Dal (2018) Spatial-temporal variations in surface ozone over Ushuaia and the Antarctic region: observations from in situ measurements, satellite data, and global models. Environmental Science and Pollution Research, 25 (3). pp. 2194-2210. ISSN 0944-1344

Naganathan, S. and Razak, H.A. and Hamid, S.N.A. (2008) Controlled low-strength material using industrial hazardous waste incinerator bottom slag and refined kaolin. In: 11th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC-11, 2008, Taipei.

Naganathan, S. and Razak, H.A. and Hamid, S.N.A. (2013) Corrosivity and leaching behavior of controlled low-strength material (CLSM) made using bottom ash and quarry dust. Journal of Environmental Management, 128. pp. 637-641. ISSN 0301-4797

Naganathan, S. and Razak, H.A. and Hamid, S.N.A. (2010) Effect of kaolin addition on the performance of controlled low-strength material using industrial waste incineration bottom ash. Waste Management & Research, 28 (9). pp. 848-860. ISSN 0734-242X

Naganathan, S. and Razak, H.A. and Hamid, S.N.A. (2012) Properties of controlled low-strength material made using industrial waste incineration bottom ash and quarry dust. Materials & Design, 33 (1). pp. 56-63. ISSN 0261-3069

Nagara, G. and Lam, W.H. and Lee, N.C.H. and Othman, F. and Shaaban, M.G. (2015) Comparative SWOT analysis for water solutions in Asia and Africa. Water Resources Management, 29 (1). pp. 125-138. ISSN 0920-4741

Nahar, Afroza and Hasanuzzaman, Md. and Rahim, Nasrudin Abd and Parvin, Salma (2019) Numerical investigation on the effect of different parameters in enhancing heat transfer performance of photovoltaic thermal systems. Renewable Energy, 132. pp. 284-295. ISSN 0960-1481

Naher, Sumsun and Haseeb, A.S. Md. Abdul (2008) Production and purification of zircon opacifier from zircon found in the coastal area of Bangladesh. Journal of Materials Processing Technology, 205 (1-3). pp. 203-206. ISSN 0924-0136

Naher, Sumsun and Haseeb, A.S. Md. Abdul (2006) A technical note on the production of zirconia and zircon brick from locally available zircon in Bangladesh. Journal of Materials Processing Technology, 172 (3). pp. 388-393. ISSN 0924-0136

Naidu, K. and Mokhlis, H. and Bakar, A.H.A. (2014) Multiobjective optimization using weighted sum Artificial Bee Colony algorithm for Load Frequency Control. International Journal of Electrical Power & Energy Systems, 55. pp. 657-667. ISSN 0142-0615

Naidu, K. and Mokhlis, H. and Bakar, A.H.A. and Terzija, V. (2014) Application of firefly algorithm with online wavelet filter in automatic generation control of an interconnected reheat thermal power system. International Journal of Electrical Power & Energy Systems, 63. pp. 401-413. ISSN 0142-0615

Naqiuddin, Nor Haziq and Saw, Lip Huat and Yew, Ming Chian and Yusof, Farazila and Poon, Hiew Mun and Cai, Zuansi and Thiam, Hui San (2018) Numerical investigation for optimizing segmented micro-channel heat sink by Taguchi-Grey method. Applied Energy, 222. pp. 437-450. ISSN 0306-2619

Narmashiri, K. and Jumaat, M.Z. (2010) Numerical study on strengthening composite bridges. Challenges, Opportunities and Solutions in Structural Engineering and Construction. pp. 241-246. ISSN 978-0-415-56809-8

Narmashiri, K. and Jumaat, M.Z. (2009) Numerical study on strengthening composite bridges. In: Proceedings of the Fifth International Structural Engineering and Construction Conference, 22-25 Sept 2009, Las Vegas, USA.

Narmashiri, K. and Jumaat, M.Z. (2011) Reinforced steel I-beams: a comparison between 2D and 3D simulation. Simulation Modelling Practice and Theory, 19 (1). pp. 564-585. ISSN 1569-190X

Narmashiri, K. and Jumaat, M.Z. and Ramli Sulong, N.H. (2011) Local stiffening of steel I-beams by using CFRP materials. Advanced Materials Research, 163. pp. 3838-3843. ISSN 0878492062

Narmashiri, K. and Jumaat, M.Z. and Sulong, N.H.R. (2011) Failure modes of CFRP flexural strengthened steel I-beams. In: 8th International Conference on Composite Science and Technology, ICCST8, 2011, Kuala Lumpur.

Narmashiri, K. and Jumaat, M.Z. and Sulong, N.H.R. (2010) Investigation on end anchoring of CFRP strengthened steel I-beams. International Journal of the Physical Sciences, 5 (9). pp. 1360-1371. ISSN 1992-1950

Narmashiri, K. and Jumaat, M.Z. and Sulong, N.H.R. (2011) Local stiffening of steel I-beams by using CFRP materials. In: 2011 International Conference on Structures and Building Materials, ICSBM 2011, 2011, Guangzhou.

Narmashiri, K. and Jumaat, M.Z. and Sulong, N.H.R. (2010) Shear strengthening of steel I-beams by using CFRP strips. Scientific Research and Essays, 5 (16). pp. 2155-2168. ISSN 1992-2248

Narmashiri, K. and Jumaat, M.Z. and Sulong, N.H.R. (2012) Strengthening of steel I-beams using CFRP strips: an investigation on CFRP bond length. Advances in Structural Engineering, 15 (12). pp. 2191-2204. ISSN 1369-4332

Narmashiri, K. and Ramli Sulong, N.H. and Jumaat, M.Z. (2011) Flexural strengthening of steel I-beams by using CFRP strips. International Journal of Physical Sciences, 6 (7). pp. 1620-1627. ISSN 19921950

Narmashiri, K. and Sulong, N.H.R. and Jumaat, M.Z. (2012) Failure analysis and structural behaviour of CFRP strengthened steel I-beams. Construction and Building Materials, 30. pp. 1-9. ISSN 0950-0618

Nasiri-Tabrizi, B. and Zalnezhad, E. and Pingguan-Murphy, Belinda and Basirun, Wan Jefrey and Hamouda, A.M.S. and Baradaran, S. (2015) Structural and morphological study of mechanochemically synthesized crystalline nanoneedles of Zr-doped carbonated chlorapatite. Materials Letters, 149. pp. 100-104. ISSN 0167-577X

Nasrin, R. and Alim, M.A. and Hasanuzzzaman, M. (2016) Assited convective heat transfer and entropy generation in a solar collector filled with nanofluid. Journal of Naval Architecture and Marine Engineering, 18 (1). pp. 795-823. ISSN 2070-8998

Nasrin, Rehena and Hasanuzzaman, Md. and Rahim, Nasrudin Abd (2018) Effect of high irradiation and cooling on power, energy and performance of a PVT system. Renewable Energy, 116. pp. 552-569. ISSN 0960-1481

Nasrin, Rehena and Hasanuzzaman, Md. and Rahim, Nasrudin Abd (2017) Effect of high irradiation on photovoltaic power and energy. International Journal of Energy Research, 42 (3). pp. 1115-1131. ISSN 0363-907X

Nasrin, Rehena and Rahim, Nasrudin Abd and Fayaz, Hussain and Hasanuzzaman, Md. (2018) Water/MWCNT nanofluid based cooling system of PVT: Experimental and numerical research. Renewable Energy, 121. pp. 286-300. ISSN 0960-1481

Nasrinahar, A. and Chuah, J.H. (2016) Effective route planning of a mobile robot for static and dynamic obstacle with fuzzy logic / Amir Nasrinahar and Joon Huang Chuah. In: 6th IEEE International Conference on Control System, Computing and Engineering , 25 - 27 November 2016, Penang, Malaysia.

Nayaka, Ramappa Ramesh and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Yusoff, Sumiani (2018) Microstructural investigation and durability performance of high volume industrial by-products-based masonry mortars. Construction and Building Materials, 189. pp. 906-923. ISSN 0950-0618

Nayaka, Ramappa Ramesh and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Yusoff, Sumiani and Alnahhal, Mohammed Fouad (2018) High volume cement replacement by environmental friendly industrial by-product palm oil clinker powder in cement – lime masonry mortar. Journal of Cleaner Production, 190. pp. 272-284. ISSN 0959-6526

Nazri, F.M. and Tan, C.G. and Ramli, M.Z. (2016) Investigation of Site-Specific Shear Wave Velocity for Geotechnical Engineering Applications Using Microtremor Array Measurement. Soil Mechanics and Foundation Engineering, 53 (5). pp. 332-335. ISSN 0038-0741

Nazri, Fadzli Mohamed and Tan, Chee Ghuan and Abdul Rashid, M.T. (2018) Investigation of Shear Wave Velocity by Using Multi-Channel Analysis of Surface Wave Method for Microzonation Map Development and Its Application to Industrial Frame Structures. Soil Mechanics and Foundation Engineering, 55 (2). pp. 110-114. ISSN 0038-0741

Nazri, Fadzli Mohamed and Tan, Chee Ghuan and Saruddin, Siti Nur Aqilah (2018) Fragility Curves of Regular and Irregular Moment-Resisting Concrete and Steel Frames. International Journal of Civil Engineering, 16 (8). pp. 917-927. ISSN 1735-0522

Nee, Chen Hon and Lee, Ming Chuan and Poh, Hun Seng and Yap, Seong Ling and Tou, Teck Yong and Yap, Seong Shan (2019) Plasma synthesis of nanodiamonds in ethanol. Composites Part B: Engineering, 162. pp. 162-166. ISSN 1359-8368

Nee, L.S. and Khalil, M. and Jan, B.M. and Ali, B.S. (2015) Lightweight biopolymer drilling fluid for underbalanced drilling: An optimization study. Journal of Petroleum Science and Engineering, 129. pp. 178-188. ISSN 0920-4105

Nee, L.S. and Mohamed Jan, B. and Si Ali, B. and Noor, I.M. (2014) The Effects of Glass Bubbles, Clay, Xanthan Gum and Starch Concentrations on the Density of Lightweight Biopolymer Drilling Fluid. Applied Mechanics and Materials, 625. pp. 526-529. ISSN 1660-9336

Ng, C.G. and Yusoff, S. (2015) Assessment of GHG emission reduction potential from source-separated organic waste (SOW) management: Case study in a higher educational institution in Malaysia. Sains Malaysiana, 44 (2). pp. 193-201. ISSN 0126-6039

Ng, C.W. and Hussain, M.A. (2004) Hybrid neural network - prior knowledge model in temperature control of a semi-batch polymerization process. Chemical Engineering and Processing: Process Intensification, 43 (4). pp. 559-570. ISSN 0255-2701

Ng, H.S. and Tan, C.P. and Mokhtar, M.N. and Ibrahim, S. and Ariff, A. and Ooi, C.W. and Ling, T.C. (2012) Recovery of Bacillus cereus cyclodextrin glycosyltransferase and recycling of phase components in an aqueous two-phase system using thermo-separating polymer. Separation and Purification Technology, 89. pp. 9-15. ISSN 1383-5866

Ng, Jen Chao and Tan, Chou Yong and Ong, Boon Hoong and Matsuda, Atsunori and Basirun, Wan Jefrey and Tan, Wai Kian and Ramesh, Singh and Yap, Boon Kar (2019) Novel palladium-guanine-reduced graphene oxide nanocomposite as efficient electrocatalyst for methanol oxidation reaction. Materials Research Bulletin, 112. pp. 213-220. ISSN 0025-5408

Ng, Y.S. and Jayakumar, N.S. and Hashim, M.A. (2011) Behavior of hydrophobic ionic liquids as liquid membranes on phenol removal: Experimental study and optimization. Desalination, 278 (1-3). pp. 250-258. ISSN 0011-9164

Ng, Y.S. and Jayakumar, N.S. and Hashim, M.A. (2010) Performance evaluation of organic emulsion liquid membrane on phenol removal. Journal of Hazardous Materials, 184 (1-3). pp. 255-260. ISSN 0304-3894

Ng, Yee Sern and Sen Gupta, B. and Hashim, Mohd Ali (2015) Effects of operating parameters on the performance of washing-electrokinetic two stage process as soil remediation method for lead removal. Separation and Purification Technology, 156 (2). pp. 403-413. ISSN 1383-5866

Nisfariza, M.N.M. and Helmi, Z.M.S. and Idris, A.S. and Steven, M. and Boyd, D. and Mior, M.H.A. (2010) CGAG46 hyperspectral sensing possibilities using continuum removal index in early detection of ganoderma in oil palm plantation. In: World Engineering Congress 2010,Malaysia Conference on Geomatics and Geographical Information Science, 2-5 August 2010, Kuching,Sarawak. (Unpublished)

Nooralishahi, Parham and Loo, Chu Kiong and Seera, Manjeevan (2018) Semi-supervised topo-Bayesian ARTMAP for noisy data. Applied Soft Computing, 62. pp. 134-147. ISSN 1568-4946

Nor, K.M. and Gani, T.A. and Mokhlis, H. (2001) The application of component-based methodology in developing visual power system analysis tool. In: Power Industry Computer Applications, 2001. PICA 2001. Innovative Computing for Power-Electric Energy Meets the Market. 22nd IEEE Power Engineering Society International Conference on, 2001.

Nor, K.M. and Mokhlis, H. and Gani, T.A. (2004) Reusability techniques in load-flow analysis computer program. IEEE Transactions on Power Systems, 19 (4). pp. 1754-1762. ISSN 0885-8950

Nor, K.M. and Mokhlis, H. and Suyono, H. and Abdel-Akher, M. and Rashid, A.H.A. and Gani, T.A. (2005) Development of power system analysis software using object components. In: TENCON 2005 2005 IEEE Region 10, 2005.

Noraini, M.Y. and Ong, H.C. and Mohamed Jan, B. and Chong, W.T. (2014) A review on potential enzymatic reaction for biofuel production from algae. Renewable and Sustainable Energy Reviews, 39. pp. 24-34. ISSN 1364-0321

Nouri, K. and Alam, M.A. and Mohammadhassani, M. and Bin Jumaat, M.Z. and Abna, A.H. (2015) Development of jute rope hybrid composite plate using carbon fibre. Structural Engineering and Mechanics, 56 (6). pp. 1095-1113. ISSN 1225-4568

Nurbaya, Z. and Wahid, M.H. and Rozana, M.D. and Alrokayan, S.A.H. and Khan, H.A. and Gan, W.C. and Majid, W.H.A. and Rusop, M. (2015) Structural and Electrical Properties of Sol-Gel-Derived Lead Titanate Nanofilms with Different Pb Contents for MIM Capacitors. JOM, 67 (12). pp. 2869-2876. ISSN 1047-4838

O

Obaydullah, M. and Jumaat, M.Z. and Alengaram, U.J. and Darain, K.M.U. and Huda, M.N. and Hosen, M.A. (2016) Prestressing of NSM steel strands to enhance the structural performance of prestressed concrete beams. Construction and Building Materials, 129. pp. 289-301. ISSN 0950-0618

Olivia Muslim, T. and Ahmed, Ali Najah and Malek, Marlinda Abdul and El-Shafie, Ahmed and El-Shafie, Amr (2019) Investigating the impact of wind on sea level rise using multilayer perceptron neural network (MLP-NN) at coastal area, Sabah. International Journal of Civil Engineering and Technology, 9 (12). pp. 646-656. ISSN 0976-6308

Omar, A.M. and Rahim, N.A. and Mekhilef, S. (2004) Three-phase synchronous PWM for flyback converter with power-factor correction using FPGA ASIC design. IEEE Transactions on Industrial Electronics, 51 (1). pp. 96-106. ISSN 0278-0046

Omar, M. and Zubir, M.B. and Moin, N.H. (2010) An alternative approach to analyze economic ordering quantity and economic production quantity inventory problems using the completing the square method. Computers & Industrial Engineering, 59 (2). pp. 362-364.

Omar, Y. and Ishak, N.H. (2009) Preventive maintenance management: an approach towards a sustainability of adaptive re-use historical buildings in kuala Lumpur, Malaysia. In: 3rd International Engineering Convention, 11-14 May 2009, Damascus, Syria..

Ong, C. and Ibrahim, S. and Gupta, B.S. (2007) A survey of tap water quality in Kuala Lumpur. Urban Water Journal, 4 (1). pp. 29-41. ISSN 1573-062X

Ong, Seng Kuan and Mo, Kim Hung and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Ling, Tung Chai (2018) Valorization of Wastes from Power Plant, Steel-Making and Palm Oil Industries as Partial Sand Substitute in Concrete. Waste and Biomass Valorization, 9 (9). pp. 1645-1654. ISSN 1877-2641

Ong, Y.H. and Lee, B.P. and Chua, A.S.M. and Ngoh, G.C. (2009) Establishment of enhanced biological phosphorus removal process by using seed sludge from a conventional activated sludge process. In: CHEMECA Conference 2009, 27-30 Sept 2009, Perth, Australia.

Onn, Chiu Chuen and Mohd, Nuruol Syuhadaa and Yuen, Choon Wah and Loo, Siaw Chuing and Koting, Suhana and Abd Rashid, Ahmad Faiz and Karim, Mohamed Rehan and Yusoff, Sumiani (2018) Greenhouse gas emissions associated with electric vehicle charging: The impact of electricity generation mix in a developing country. Transportation Research Part D: Transport and Environment, 64. pp. 15-22. ISSN 1361-9209

Ooi, C.W. and Tan, C.P. and Hii, S.L. and Ariff, A. and Ibrahim, S. and Ling, T.C. (2011) Primary recovery of lipase derived from Burkholderia sp. ST8 with aqueous micellar two-phase system. Process Biochemistry, 46 (9). pp. 1847-1852. ISSN 1359-5113

Oshkour, A. and Abu Osman, Noor Azuan and Yau, Y. and Tarlochan, F. and Wan Abas, Wan Abu Bakar (2012) Design of new generation femoral prostheses using functionally graded materials: a finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. ISSN 0954-4119

Oshkour, A.A. and Abu Osman, Noor Azuan and Davoodi, M.M. and Bayat, M. and Yau, Y.H. and Wan Abas, Wan Abu Bakar (2011) Impact load and mechanical respond of tibiofemoral joint. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Oshkour, A.A. and Abu Osman, Noor Azuan and Davoodi, M.M. and Bayat, M. and Yau, Y.H. and Wan Abas, Wan Abu Bakar (2011) Knee joint stress analysis in standing. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Oshkour, A.A. and Abu Osman, Noor Azuan and Yau, Y.H. and Tarlochan, F. and Pramanik, S. and Wan Abas, Wan Abu Bakar (2013) Internal-external circumferential crack behaviour in the cement layer of total hip replacement. Fatigue & Fracture of Engineering Materials & Structures , 36 (7). pp. 586-601. ISSN 8756-758X

Oshkour, A.A. and Davoodi, M.M. and Abu Osman, Noor Azuan and Yau, Y.H. and Tarlochan, F. and Wan Abas, Wan Abu Bakar (2013) Finite element analysis of circumferential crack behavior in cement-femoral prosthesis interface. Materials & Design, 49. pp. 96-102. ISSN 0261-3069

Oshkour, Azim Ataollahi and Abu Osman, Noor Azuan and Davoodi, M.M. and Yau, Y.H. and Tarlochan, F. and Wan Abas, Wan Abu Bakar and Bayat, M. (2013) Finite element analysis on longitudinal and radial functionally graded femoral prosthesis. International Journal for Numerical Methods in Biomedical Engineering, 29 (12). pp. 1412-1427. ISSN 2040-7939

Osman, N.A. and Abu Yahud, S. and Goh, S.Y. (2008) Development of mechanical prosthetic hand system for BCI application. European Journal of Scientific Research, 20 (4). p863.

Osman, N.A.A. and Wong, S.S. and Omar, Z. (2002) An approach for the correlation of EMG signals and the rectification of PTB sockets. Journal of Mechanics in Medicine and Biology, 2 (01). pp. 9-17. ISSN 0219-5194

Osman, N.A.A.B.U. and Ghazali, R.M.A.T. (2002) Biomechanical evaluation on gait pattern of pregnant subjects. Journal of Mechanics in Medicine and Biology, 2 (01). pp. 99-116. ISSN 0219-5194

Osman, Z. and Md. Isa, K.B. and Ahmad, A. (2009) Preparation and studies of polyacrylonitrile ion conducting polymer electrolytes. In: National Workshop on Functional Materials 2009, 16 June 2009, Centre For Ionics, University of Malaya.

Othman, Faridah and Chowdhury, Md Sadek Uddin and Wan Jaafar, Wan Zurina and Mohammad Faresh, E.M. and Shirazi, Sharif Moniruzzaman (2018) Assessing Risk and Sources of Heavy Metals in a Tropical River Basin: A Case Study of the Selangor River, Malaysia. Polish Journal of Environmental Studies, 27 (4). pp. 1659-1671. ISSN 1230-1485

Othman, R. and Binh, D.N. and Ismail, A.B. and Long, B.D. and Ariga, T. (2012) Effects of current density on the formation and microstructure of Sn–9Zn, Sn–8Zn–3Bi and Sn–3Ag–0.5Cu solder joints. Intermetallics, 22. pp. 1-6. ISSN 0966-9795

Othman, S.H. and Ibrahim, F. and Omar, S.Z. and Rahim, R.B.A. (2008) Flexion relaxation phenomenon of back muscles in discriminating between healthy and chronic low back pain women. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Otsuru, T. and Kusno, A. and Tomiku, R. and Okuzuno, T. and Okamoto, N. and Che Din, N. (2013) Humidity effect on pressure-velocity sensor examined in sound absorption measurement with ensemble averaging technique. In: Inter Noise 2013, 15-18 Sep 2013, Innsbruck, Austria. (Submitted)

Owlad, M. and Aroua, M.K. and Daud, W.M.A.W. and Baroutian, S. (2009) Removal of hexavalent chromium-contaminated water and wastewater: A review. Water Air and Soil Pollution, 200 (1-4). pp. 59-77. ISSN 0049-6979

Owlad, M. and Aroua, Mohamed Kheireddine and Daud, Wan Mohd Ashri Wan (2010) Hexavalent chromium adsorption on impregnated palm shell activated carbon with polyethyleneimine. Bioresource Technology, 101 (14). pp. 5098-5103. ISSN 0960-8524

P

Palizban, O. and Mekhilef, S. (2011) Modeling and control of photovoltaic panels base perturbation and observation MPPT method. In: 2011 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2011, Penang.

Palizban, O. and Mekhilef, S. (2011) Power optimization and static performance investigation of an island-mode doubly-fed induction generator (DFIG). In: 2011 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2011, Penang.

Palizban, O. and Rezaei, M.A. and Mekhilef, S. (2011) Active and reactive power control for a hybrid system with photovoltaic panel, wind turbine, fuel cells, electrolyzer and super capacitor in off-grid mode. In: 2011 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2011, Penang.

Pan, W.F. and Razak, H.A. (2010) Concrete performance using locally produced kaolin. Proceedings of Institution of Civil Engineers: Construction Materials, 163 (4). pp. 201-209. ISSN 1747-6518

Pang, S.W. and Yang, H.Z. and Harun, Sulaiman Wadi (2011) Simple fiber optic sensor based on tapered fiber for aliphatic alcohol detection. Journal of Optoelectronics and Advanced Materials, 13 (5-6). pp. 604-608. ISSN 1454-4164

Panjehpour, M. and Chai, H.K. and Voo, Y.L. (2015) Refinement of strut-and-tie model for reinforced concrete deep beams. PLoS ONE, 10 (6). p. 17. ISSN 1932-6203

Parker, E. and Vessillier, S. and Pingguan-Murphy, B. and Wan Abas, W.A.B. and Bader, D.L. and Chowdhury, T.T. (2013) Low oxygen tension increased fibronectin fragment induced catabolic activities - response prevented with biomechanical signals. Arthritis Research & Therapy, 15 (5). R163. ISSN 1478-6354

Parnianifard, Amir and Ahmad, Siti Azfanizam and Ariffin, Mohd Khairol Anuar Mohd and Ismail, Mohd Idris Shah and Ale Ebrahim, Nader (2019) Recent developments in metamodel based robust black-box simulation optimization: An overview. Decision Science Letters, 8 (1). pp. 17-44. ISSN 1929-5804

Parvizi, R. and Ali, N.M. and Harun, Sulaiman Wadi and Moghavvemi, Mahmoud and Arof, Hamzah and Ahmad, Harith (2011) Multi-wavelength Brillouin fiber laser using dual-cavity configuration. Laser Physics, 21 (1). pp. 205-209. ISSN 1054-660X

Parvizi, R. and Harun, Sulaiman Wadi and Ali, N.M. and Arof, Hamzah and Ahmad, Harith (2012) Investigation on threshold power of stimulated Brillouin scattering in photonic crystal fiber. Optik, 123. pp. 1149-1152. ISSN 0030-4026

Peake, N.J. and Pavlov, A.M. and D'Souza, A. and Pingguan-Murphy, B. and Sukhorukov, G.B. and Hobbs, A.J. and Chowdhury, T.T. (2015) Controlled release of C-type natriuretic peptide by microencapsulation dampens proinflammatory effects induced by IL-1 beta in cartilage explants. Biomacromolecules, 16 (2). pp. 524-531. ISSN 1525-7797

Peck, S.M. and Hua, N.T. and Seyed, M.M. (2016) Classification of urinary dielectric properties for diabetes and kidney disease using support vector machine. In: The 16th International Conference on Biomedical Engineering 2016, 7-10 December 2016, Singapore.

Peyman, J. and Akbar Nozari, A. and Soin, N. and Ibrahim, F. (2009) Evaluation of pressure changes for capillary and fishbone valves in Lab-on-CD systems. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.

Pouran, S.R. and Abdul Raman, A.A. and Daud, Wan Mohd Ashri Wan (2014) Review on the application of modified iron oxides as heterogeneous catalysts in Fenton reaction. Journal of Cleaner Production, 64. pp. 24-35. ISSN 0959-6526

Pourzolfaghar, Hamed and Abnisa, Faisal and Daud, Wan Mohd Ashri Wan and Aroua, Mohamed Kheireddine (2018) Atmospheric hydrodeoxygenation of bio-oil oxygenated model compounds: A review. Journal of Analytical and Applied Pyrolysis, 133. pp. 117-127. ISSN 0165-2370

Pramanik, S. and Pingguan-Murphy, B. and Osman, N.A.A. (2012) Progress of key strategies in development of electrospun scaffolds: bone tissue. Science and Technology of Advanced Materials, 13 (4). 043002. ISSN 1468-6996

Primasari, B. and Ibrahim, S. and Annuar, M.S.M. and Remmie, L.X.I. (2011) Aerobic treatment of oily wastewater: effect of aeration and sludge concentration to pollutant reduction and PHB accumulation. World Academy of Science, Engineering and Technology, 78. pp. 172-176. ISSN 2010376X (ISSN)

Q

Qabajeh, M. and Abdul Hashim, A.H. and Khalifa, O. and Qabajeh, L. (2009) An Efficient Multicast Routing Protocol With Quality Of Service For Mobile Ad-Hoc Networks. In: International Engineering Convention, 11-14 May 2009, Damascus, Syria. (Submitted)

Qeshta, I.M.I. and Shafigh, P. and Jumaat, M.Z. (2015) Flexural behaviour of RC beams strengthened with wire mesh-epoxy composite. Construction and Building Materials, 79. pp. 104-114. ISSN 0950-0618

Qi, H. and Huang, G.Y. and Han, Y.L. and Zhang, X.H. and Li, Y.H. and Pingguan-Murphy, B. and Lu, T.J. and Xu, F. and Wang, L. (2015) Engineering artificial machines from designable DNA materials for biomedical applications. Tissue Engineering Part B-Reviews, 21 (3). pp. 288-297. ISSN 1937-3368

R

Rad, A.G. and Karim, M.R. (2011) A robust traffic quantity measurement with video surveillance. International Journal of Physical Sciences, 6 (5). pp. 962-970. ISSN 19921950

Radjai, T. and Gaubert, J.P. and Rahmani, L. and Mekhilef, S. (2015) Experimental verification of P&O MPPT algorithm with direct control based on Fuzzy logic control using CUK converter. International Transactions on Electrical Energy Systems, 25 (12). pp. 3492-3508. ISSN 2050-7038

Radzi, N.F.M. and Mubin, M. and Rahim, N.A. and Mokhtar, N. (2012) UAV collision detection algorithm design based on circle overlapping test. In: 4th International Conference on Mechanical and Electrical Technology, ICMET 2012, 2012, Kuala Lumpur.

Rafieerad, A.R. and Zalnezhad, E. and Bushroa, A.R. and Hamouda, A.M.S. and Sarraf, M. and Nasiri-Tabrizi, B. (2015) Self-organized TiO2 nanotube layer on Ti–6Al–7Nb for biomedical application. Surface and Coatings Technology, 265. pp. 24-31. ISSN 0257-8972

Rahim, H.A. and Ibrahim, F. and Taib, M.N. (2008) Model order selection criterion for monitoring haemoglobin status in dengue patients using ARX model. In: 5th International Conference on Information Technology and Applications in Biomedicine, ITAB 2008 in conjunction with 2nd International Symposium and Summer School on Biomedical and Health Engineering, IS3BHE 2008, 2008, Shenzhen.

Rahim, H.A. and Ibrahim, F. and Taib, M.N. (2007) A novel prediction system in dengue fever using NARMAX model. In: International Conference on Control, Automation and Systems, ICCAS 2007, 2007, Seoul.

Rahim, N.A. and Mekhilef, S. and Chan, E.L. and Ping, H.W. (2006) Fuzzy-controlled battery charger state-of-charge controller. International Journal of Modelling and Simulation, 26 (2). pp. 106-110. ISSN 02286203

Rahim, N.A. and Mekhilef, S. and Islam, Z. (2007) A new approach for harmonic compensation using single- Phase hybrid active power filter. In: TENCON 2005 - 2005 IEEE Region 10 Conference, Melbourne.

Rahim, N.A. and Mekhilef, S. and Zahrul, I. (2005) Design and implementation of single-phase hybrid active power filter controller. In: Sixth International Conference on Power Electronics and Drive Systems, PEDS 2005, Kualu Lumpur.

Rahim, N.A. and Mekhilef, S. and Zahrul, I. (2005) A single-phase active power filter for harmonic compensation. In: 2005 IEEE International Conference on Industrial Technology, ICIT 2005, Hong Kong.

Rahim, N.A. and Saidur, R. and Solangi, K.H. and Othman, M. and Amin, N. (2012) Survey of grid-connected photovoltaic inverters and related systems. Clean Technologies and Environmental Policy, 14 (4). pp. 521-533. ISSN 1618-954X

Rahimi, Zhoobin and Mohd Shafri, Helmi Zulhaidi and Norman, Masayu (2018) A GNSS-based weather forecasting approach using Nonlinear Auto Regressive Approach with Exogenous Input (NARX). Journal of Atmospheric and Solar-Terrestrial Physics, 178. pp. 74-84. ISSN 1364-6826

Rahman, Azlan and Mamat, Azuddin and Wagiman, Abdullah (2009) Effect of Machining Parameters on Hole Quality of Micro Drilling for Brass. Modern Applied Science, 3 (5). pp. 221-230. ISSN 1913-1844

Rahman, H.A. and Rahim, H.R.A. and Harun, Sulaiman Wadi and Yasin, M. and Apsari, R. and Ahmad, Harith and Wan Abas, Wan Abu Bakar (2013) Detection of stain formation on teeth by oral antiseptic solution using fiber optic displacement sensor. Optics and Laser Technology, 45 (1). pp. 336-341. ISSN 0030-3992

Rahman, H.S. and Abu Osman, Noor Azuan and Yahud, S. and Ahmad, T.S. and Ng, E.S. (2007) A study of the external finger fixator to correct flexion deformity. Journal of Biomechanics, 40. S183. ISSN 0021-9290

Rahman, M.D.A. and Said, S.M. and Balamurugan, S. (2015) Blue phase liquid crystal: Strategies for phase stabilization and device development. Science and Technology of Advanced Materials, 16 (3). p. 21. ISSN 1468-6996

Rahman, M.M. and Billah, M.M. and Hasanuzzaman, M. and Saidur, R. and Rahim, N.A. (2012) Heat transfer enhancement of nanofluids in a Lid-Driven square enclosure. Numerical Heat Transfer, Part A: Applications, 62 (12). pp. 973-991. ISSN 1521-0634

Rahman, M.M. and Billah, M.M. and Mamun, M.A.H. and Saidur, R. and Hasanuzzaman, M. (2010) Reynolds and prandtl numbers effects on mhd mixed convection in a lid-driven cavity along with joule heating and a centered heat conducting circular block. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 163-170. ISSN 1823-0334

Rahman, M.M. and Billah, M.M. and Rahim, N.A. and Amin, N. and Saidur, R. and Hasanuzzaman, M. (2011) A numerical model for the simulation of double-diffusive natural convection in a right-angled triangular solar collector. International Journal of Renewable Energy Research, 1 (2). pp. 50-54. ISSN 1309-0127

Rahman, M.M. and Billah, M.M. and Rahim, N.A. and Saidur, R. and Hasanuzzaman, M. (2012) Finite element simulation of magnetohydrodynamic mixed convection in a double-lid driven enclosure with a square heat-generating block. Journal of Heat Transfer-Transactions of the Asme, 134 (6). 0022-1481. ISSN 0022-1481

Rahman, M.M. and Jumaat, M.Z. (2012) Cost minimum proportioning of non-Slump concrete mix using genetic algorithms. In: 3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012, 2012, Xiamen.

Rahman, M.M. and Jumaat, M.Z. and Hosen, M.A. (2012) Genetic algorithm for material cost minimization of external strengthening system with fiber reinforced polymer. In: 3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012, 2012, Xiamen.

Rahman, M.M. and Jumaat, M.Z. and Rahman, M.A. and Qeshta, I.M.I. (2015) Innovative hybrid bonding method for strengthening reinforced concrete beam in flexure. Construction and Building Materials, 79. pp. 370-378. ISSN 0950-0618

Rahman, M.M. and Mamun, M.A.H. and Billah, M.M. and Rahman, S. (2011) Natural convection flow in a square cavity with internal heat generation and a flush mounted heater on a side wall. Journal of Naval Architecture and Marine Engineering, 7 (2). pp. 37-50. ISSN 2070-8998

Rahman, M.M. and Mamun, M.A.H. and Saidur, R. (2011) Analysis of magnetohydrodynamic mixed convection and joule heating in lid-driven cavity having a square block. Journal of the Chinese Institute of Engineers, 34 (5). pp. 585-599. ISSN 0253-3839

Rahman, M.M. and Mamun, M.A.H. and Saidur, R. and Nagata, S. (2009) Effect of a heat conducting horizontal circular cylinder on MHD mixed convection in a lid-driven cavity along with joule heating. International Journal of Mechanical and Materials Engineering, 4 (3). pp. 256-265. ISSN 18230334

Rahman, M.M. and Oztop, H.F. and Rahim, N.A. and Saidur, R. and Al-Salem, K. (2011) Mhd mixed convection with joule heating effect in a lid-driven cavity with a heated semi-circular source using the finite element technique. Numerical Heat Transfer Part a-Applications, 60 (6). pp. 543-560. ISSN 10407782

Rahman, M.M. and Oztop, H.F. and Rahim, N.A. and Saidur, R. and Al-Salem, K. and Amin, N. and Mamun, M.A.H. and Ahsan, A. (2012) Computational analysis of mixed convection in a channel with a cavity heated from different sides. International Communications in Heat and Mass Transfer, 39 (1). pp. 78-84. ISSN 0735-1933

Rahman, M.M. and Parvin, S. and Rahim, N.A. and Hasanuzzaman, M. and Saidur, R. (2012) Simulation of mixed convection heat transfer in a horizontal channel with an open cavity containing a heated hollow cylinder. Heat Transfer - Asian Research, 41 (4). pp. 339-353. ISSN 10992871

Rahman, M.M. and Parvin, S. and Rahim, N.A. and Hasanuzzaman, M. and Saidur, R. (2012) Simulation of mixed convection heat transfer in a horizontal channel with an open cavity containing a heated hollow cylinder. Heat Transfer - Asian Research, 41 (4). pp. 339-353. ISSN 10992871

Rahman, M.M. and Parvin, S. and Rahim, N.A. and Islam, M.R. and Saidur, R. and Hasanuzzaman, M. (2012) Effects of Reynolds and Prandtl number on mixed convection in a ventilated cavity with a heat-generating solid circular block. Applied Mathematical Modelling, 36 (5). pp. 2056-2066. ISSN 0307-904X

Rahman, M.M. and Parvin, S. and Saidur, R. and Rahim, N.A. (2011) Magnetohydrodynamic mixed convection in a horizontal channel with an open cavity. International Communications in Heat and Mass Transfer, 38 (2). pp. 184-193. ISSN 0735-1933

Rahman, M.M. and Rahim, N.A. and Amin, N. and Saidur, R. (2011) A numerical model for the simulation of double-diffusive natural convection in a triangular solar collector. In: 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011, 2011, Kuala Lumpur.

Rahman, M.M. and Rahim, N.A. and Saha, S. and Billah, M.M. and Saidur, R. and Ahsan, A. (2011) Optimization of mixed convection in a lid-driven enclosure with a heat generating circular body. Numerical Heat Transfer Part a-Applications, 60 (7). pp. 629-650. ISSN 1040-7782

Rahman, M.M. and Rahim, N.A. and Saha, S. and Billah, M.M. and Saidur, R. and Ahsan, A. (2011) Optimization of mixed convection in a lid-driven enclosurewith a heat generating circular body. Numerical Heat Transfer, Part A: Applications, 60 (7). pp. 629-650. ISSN 1040-7782

Rahman, M.M. and Saidur, Rahman and Rahim, N.A. (2011) Conjugated effect of joule heating and magneto-hydrodynamic on double-diffusive mixed convection in a horizontal channel with an open cavity. International Journal of Heat and Mass Transfer, 54 (15-16). pp. 3201-3213. ISSN 0017-9310

Rahman, M.S. and Rashid, M.M. and Hussain, M.A. (2012) Thermal conductivity prediction of foods by Neural Network and Fuzzy (ANFIS) modeling techniques. Food and Bioproducts Processing, 90 (C2). pp. 333-340. ISSN 0960-3085

Rahman, M.S. and Rashid, M.M. and Hussain, M.A. (2012) Thermal conductivity prediction of foods by Neural Network and Fuzzy (ANFIS) modeling techniques. Food and Bioproducts Processing, 90 (C2). pp. 333-340. ISSN 0960-3085

Rahman, N.A. and Hussain, M.A. and Jahim, J.M. (2012) Production of fructose using recycle fixed-bed reactor and batch bioreactor. Journal of Food Agriculture & Environment, 10 (2). pp. 268-273. ISSN 1459-0255

Rajaa Shaari, H. and Sethuprakhash, V. and Basirun, Wan Jefrey (2016) Vanadium based lithium nickel aluminiumoxide system with good performance in lithium-ion batteries. Jurnal Teknologi, 78 (5-10). pp. 126-132. ISSN 0127-9696

Rajammal, K. and Kufian, M.Z. and Majid, S.R. and Arof, Abdul Kariem (2009) Synthesis and characterization Of LiNi1_xZnxV04 4. In: National Workshop on Functional Materials 2009, 16 June 2009, Centre for Ionics,University of Malaya.

Rajendran, S. and Arof, Hamzah and Ibrahim, Fatimah and Yegappan, S. (2008) Review on technical aspects of image acquisition, analysis and retrieval for leukaemia cells. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Rajendran, S. and Arof, Hamzah and Mokhtar, N. and Mubin, M. and Yegappan, S. and Ibrahim, Fatimah (2011) Dual modality search and retrieval technique analysis for leukemic information system. Scientific Research and Essays, 6 (2). pp. 247-255. ISSN 1992-2248

Rajendran, S. and Arof, Hamzah and Mokhtar, Norrima and Mubin, M. and Yegappan, S. and Ibrahim, Fatimah (2011) Dual modality search and retrieval technique analysis for leukemic information system. Scientific Research and Essays, 6 (2). pp. 247-255. ISSN 1992-2248

Rakib, M.I. and Choudhury, Imtiaz Ahmed and Hussain, S. and Abu Osman, Noor Azuan (2015) Design and biomechanical performance analysis of a user-friendly orthotic device. Materials & Design, 65. pp. 716-725. ISSN 0261-3069

Ramalingam, S. and Mohd, S. and Samsuddin, S.M. and Min, N.G.W. and Yusof, N. and Mansor, A. (2015) A retrospective study on annual evaluation of radiation processing for frozen bone allografts complying to quality system requirements. Cell and Tissue Banking, 16 (4). pp. 545-552. ISSN 1389-9333

Ramasamy, Ramesh and Ibrahim, Zainah and Chai, Hwa Kian (2018) Screening method for platform conductor integrity assessment for life extension prioritisation. Marine Structures, 58. pp. 136-153. ISSN 0951-8339

Rambely, A.S. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Usman, J. and Yusof, M.S. (2003) An innovative survey poles configuration: an alternative 3-D volume calibrating system. Jurnal Teknologi.

Ramdan, R.D. and Jauhari, I. and Izman, S. and Abdul Kadir, M.R. and Prawara, B. and Hadi, N. (2011) Shear mechanisms during cryogenic treatment of Ti6Al4V. In: Proceeding of the 12th International Conference on QiR (Quality in Research), 04-07 July 2011, Bali, Indonesia.

Ramesh, Singh and Sara Lee, K.Y. and Tan, Chou Yong and Wong, Yew Hoong and Alengaram, Ubagaram Johnson and Tarlochan, Faris and Ramesh, Subramaniam and Teng, W.D. and Sutharsini, U. and Sarhan, Ahmed Aly Diaa Mohammed (2018) Effect of microwave sintering on the properties of copper oxide doped Y-TZP ceramics. Ceramics International, 44 (16). pp. 19639-19645. ISSN 0272-8842

Ramli, N.M. and Hussain, M.A. and Mohamed Jan, B. and Abdullah, B. (2014) Composition Prediction of a Debutanizer Column using Equation Based Artificial Neural Network Model. Neurocomputing, 131. pp. 59-76. ISSN 0925-2312

Ramli, R. and Arof, Hamzah and Ibrahim, Fatimah and Idris, Mohd Yamani Idna and Khairuddin, A.S.M. (2015) Classification of eyelid position and eyeball movement using EEG signals. Malaysian Journal of Computer Science, 28 (1). pp. 28-45. ISSN 0127-9084

Ramli, R. and Mokhtar, Norrima and Arof, Hamzah and Mohd Anwar, M.S. and Meor Hamzah, N.H. and Ibrahim, Fatimah (2009) Development of brain signal processing interface software for Trackit-LabVIEW. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.

Ramli Sulong, N.H. and Elghazouli, A.Y. and Izzuddin, B.A. (2007) Behaviour and design of beam-to-column connections under fire conditions. Fire Safety Journal, 42 (6-7). pp. 437-451. ISSN 0379-7112

Ranjbar, N. and Behnia, A. and Chai, H.K. and Alengaram, U.J. and Jumaat, M.Z. (2016) Fracture evaluation of multi-layered precast reinforced geopolymer-concrete composite beams by incorporating acoustic emission into mechanical analysis. Construction and Building Materials, 127. pp. 274-283. ISSN 0950-0618

Ranville, J.F. and Sibrell, P.L. and Wildeman, T.R. and Lee, B.T. and Jang, M. and Shim, Y.S. and Ji, W.H. and Park, H.S. and Lee, H.J. (2009) Assessment for treatment options at the Young Dong Coal Mine site, South Korea. In: Joint Conference of 26th Annual Meetings of the American Society of Mining and Reclamation and 11th Billings Land Reclamation Symposium 2009, 2009, Billings, MT.

Rashid, M. and Karim, O. and Hussain, M.A. (1987) Determination of trace amounts of water in propylene carbonate using the proton isoconcentration technique. The Analyst, 112 (2). pp. 163-165. ISSN 0003-2654

Rashid, M.M. and Hussain, M.A. and Rahim, N. Abd (2006) Application of magneto-rheological damper for car suspension control. Journal of Applied Sciences, 6 (4). pp. 933-938. ISSN 18125654

Rashid, M.M. and Hussain, M.A. and Rahim, N. Abd and Momoh, J.S. (2007) Development of a semi-active car suspension control system using magneto-rheological damper model. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 93-108. ISSN 18230334

Rashid, M.M. and Hussain, M.A. and Rahim, N.A. and Momoh, J.S. (2009) Development of fuzzy logic controller for magnetorheological rotary brake system. International Journal of Mechanical and Materials Engineering, 4 (3). pp. 232-238. ISSN 18230334

Rashid, M.M. and Hussain, M.A. and Raisuddin Khan, M. (2009) Development of hybrid controller of wheeled robot for mine detection. In: 2009 International Conference on Mechanical and Electrical Technology, ICMET'09, 2009, Beijing.

Rashid, M.M. and Rahim, N.A. and Hussain, M.A. and Mohamed, F. and Rahman, M.A. (2008) Development and testing of hybrid fuzzy logic controller for car suspension system using magneto-rheological damper. In: 2008 IEEE Industry Applications Society Annual Meeting, IAS'08, 2008, Edmonton, AB.

Rashid, M.M. and Rahim, N.A. and Hussain, M.A. and Rahman, M.A. (2011) Analysis and experimental study of magnetorheological-based damper for semiactive suspension system using fuzzy hybrids. IEEE Transactions on Industry Applications, 47 (2). pp. 1051-1059. ISSN 0093-9994

Rashid, Mohd Mahbubur and Hussain, Mohd Azalan and Rahim, Nasrudin Abel and Salit, Mohd Sapuan (2008) Development of controllers for a nonlinear quarter car active suspension system. International Journal of Vehicle Autonomous Systems, 6 (3/4). pp. 376-395. ISSN 1471-0226

Raymond, W.J.K. and Illias, H.A. and Abu Bakar, A.H. and Mokhlis, H. (2015) Partial discharge classifications: Review of recent progress. Measurement, 68. pp. 164-181. ISSN 0263-2241

Raza, S. and Mokhlis, Hazlie and Arof, Hamzah and Laghari, J.A. and Wang, L. (2015) Application of signal processing techniques for islanding detection of distributed generation in distribution network : A review. Energy Conversion and Management, 96. pp. 613-624. ISSN 0196-8904

Razak, H.A. and Chai, H.K. and Wong, H.S. (2004) Near surface characteristics of concrete containing supplementary cementing materials. Cement and Concrete Composites, 26 (7). pp. 883-889. ISSN 09589465

Razak, H.A. and Choi, F.C. (2001) The effect of corrosion on the natural frequency and modal damping of reinforced concrete beams. Engineering Structures, 23 (9). pp. 1126-1133. ISSN 01410296

Razak, H.A. and Chua, C.S. and Toyoda, H. (2004) Weatherability of coated fabrics as roofing material in tropical environment. Building and Environment, 39 (1). pp. 87-92. ISSN 0360-1323

Razak, H.A. and Fayyadh, M.M. (2013) Sensitivity of Natural Frequencies to Composite Effects in Reinforced Concrete Elements. Mechanics of Advanced Materials and Structures, 20 (6). pp. 441-453. ISSN 1537-6494

Razak, H.A. and Ferdiansyah, T. (2005) Toughness characteristics of Arenga pinnata fibre concrete. Journal of Natural Fibers, 2 (2). pp. 89-103. ISSN 1544-0478

Razak, H.A. and Mahde, A.K. and Yahya, A.H. (2002) Chemical cellulation technique for lightweight clay bricks. British Ceramic Transactions, 101 (4). pp. 172-176. ISSN 0967-9782

Razak, H.A. and Naganathan, S. and Hamid, S.N.A. (2010) Controlled Low-Strength Material Using Industrial Waste Incineration Bottom Ash and Refined Kaolin. Arabian Journal for Science and Engineering, 35 (2B). pp. 53-67. ISSN 1319-8025

Razak, H.A. and Naganathan, S. and Hamid, S.N.A. (2009) Performance appraisal of industrial waste incineration bottom ash as controlled low-strength material. Journal of Hazardous Materials, 172 (2-3). pp. 862-867. ISSN 0304-3894

Razak, H.A. and Sajedi, F. (2011) The effect of heat treatment on the compressive strength of cement-slag mortars. Materials & Design, 32 (8-9). pp. 4618-4628. ISSN 0261-3069

Razak, H.A. and Teng, S.L. and Ismail, Z. and Abdul Rahman, A.G. (2001) Crack detection in a simply supported RC beam using simplified Laplacian. Proceedings of the International Modal Analysis Conference - IMAC, 2. pp. 1344-1350. ISSN 10466770

Razak, H.A. and Wong, H.S. (2005) Strength estimation model for high-strength concrete incorporating metakaolin and silica fume. Cement and Concrete Research, 35 (4). pp. 688-695. ISSN 0008-8846

Razali, R. and Abu Osman, Noor Azuan and Shasmin, H.N. and Usman, J. and Wan Abas, Wan Abu Bakar (2005) Acceptable load carriage for primary school girls. European Journal of Scientific Research, 15 (3). pp. 396-403. ISSN 1450-216X

Razali, R. and Abu Osman, Noor Azuan and Shasmin, H.N. and Usman, J. and Wan Abas, Wan Abu Bakar (2006) Acceptable load carriage for primary school girls. European Journal of Scientific Research, 15 (3). pp. 396-403. ISSN 1450216X

Razavi, S.V. and Jumaat, M.Z. and Ahmed, E.S.H. and Mohammadi, P. (2012) Using generalized regression neural network (GRNN) for mechanical strength prediction of lightweight mortar. Computers and Concrete, 10 (4). pp. 379-390. ISSN 15988198

Razavi, S.V. and Jumaat, M.Z. and Ei-Shafie, A.H. (2011) Using feed-forward back propagation (FFBP) neural networks for compressive strength prediction of lightweight concrete made with different percentage of scoria instead of sand. International Journal of Physical Sciences, 6 (6). pp. 1325-1331. ISSN 19921950

Razavi, S.V. and Jumaat, M.Z. and Ei-Shafie, A.H. and Mohammadi, P. (2011) Artificial neural networks for mechanical strength prediction of lightweight mortar. Scientific Research and Essays, 6 (16). pp. 3406-3417. ISSN 19922248

Razavi, S.V. and Jumaat, M.Z. and Ei-Shafie, A.H. and Mohammadi, P. (2011) General regression neural network (GRNN) for the first crack analysis prediction of strengthened RC one-way slab by CFRP. International Journal of Physical Sciences, 6 (10). pp. 2439-2446. ISSN 19921950

Razman, R. and Cheong, J.P.G. and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan (2012) Anthropometric and strength characteristics of tenpin bowlers with different playing abilities. Biology of Sport, 29 (1). pp. 33-38. ISSN 10.5604/20831862.979853

Razman, R. and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan and Cheong, J.P.G. (2011) Temporal characteristics of the final delivery phase and its relation to tenpin bowling performance. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Redzwan, G. and Ying, L.L.S. and Ibrahim, S. and Annuar, M.S.M. (2008) A Case Study on Bulking Problems in Paper Recycling Effluent Treatment Plant in Malaysia. Asian Journal of Water, Environment and Pollution, 5 (2). pp. 13-18. ISSN 0972-9860

Rehman, M.A. and Yusoff, I. and Alias, Y. (2015) Fluoride adsorption by doped and un-doped magnetic ferrites CuCexFe2-xO4: Preparation, characterization, optimization and modeling for effectual remediation technologies. Journal of Hazardous Materials, 299. pp. 316-324. ISSN 0304-3894

Rehman, S.K.U. and Ibrahim, Z. and Javed, M.F. and Hanif, M.U. (2017) Piezo-resistive characteristics of graphene-based cement materials. In: 24th International Congress on Sound and Vibration (ICSV24) 2017, 23-27 July 2017, Park Plaza Westminster Bridge Hotel, London, United Kingdom.

Rehman, S.K.U. and Ibrahim, Z. and Memon, S.A. and Javed, M.F. and Khushnood, R.A. (2017) A Sustainable Graphene Based Cement Composite. Sustainability, 9 (7). p. 1229. ISSN 2071-1050

Rehman, Sardar Kashif Ur and Ibrahim, Zainah and Jameel, Mohammad and Memon, Shazim Ali and Javed, Muhammad Faisal and Aslam, Muhammad and Mehmood, Kashif and Nazar, Sohaib (2018) Assessment of Rheological and Piezoresistive Properties of Graphene based Cement Composites. International Journal of Concrete Structures and Materials, 12 (1). p. 64. ISSN 1976-0485

Rifat, A.A. and Mahdiraji, Ghafour Amouzad and Chow, D.M. and Shee, Yu Gang and Ahmed, R. and Adikan, Faisal Rafiq Mahamd (2015) Photonic crystal fiber-based surface plasmon resonance sensor with selective analyte channels and graphene-silver deposited core. Sensors, 15 (5). pp. 11499-11510. ISSN 1424-8220

Rifat, Ahmmed A. and Haider, Firoz and Ahmed, Rajib Ali and Mahdiraji, Ghafour Amouzad and Adikan, Faisal Rafiq Mahamd and Miroshnichenko, Andrey E. (2018) Highly sensitive selectively coated photonic crystal fiber-based plasmonic sensor. Optics Letters, 43 (4). pp. 891-894. ISSN 0146-9592

Rismanchi, B. and Saidur, R. and Boroumandjazi, G. and Ahmed, S. (2012) Energy, exergy and environmental analysis of cold thermal energy storage (CTES) systems. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5741-5746. ISSN 13640321

Rismanchi, Behzad and Saidur, Rahman and Masjuki, Haji Hassan and Mahlia, Teuku Meurah Indra (2012) Cost-benefit analysis of using cold thermal energy storage systems in building applications. In: 2nd International Conference on Advances in Energy Engineering (ICAEE 2011), 27-28 December 2011, Bangkok.

Rismanchi, Behzad and Saidur, Rahman and Masjuki, Haji Hassan and Mahlia, Teuku Meurah Indra (2012) Energetic, economic and environmental benefits of utilizing the ice thermal storage systems for office building applications. Energy and Buildings, 50. pp. 347-354. ISSN 0378-7788

Rismanchi, Behzad and Saidur, Rahman and Masjuki, Haji Hassan and Mahlia, Teuku Meurah Indra (2012) Thermodynamic evaluation of utilizing different ice thermal energy storage systems for cooling application in office buildings in Malaysia. Energy and Buildings, 53. pp. 117-126. ISSN 0378-7788

Rodriguez, O. and Stone, W. and Schemitsch, E.H. and Zalzal, P. and Waldman, S. and Papini, M. and Towler, M.R. (2017) Titanium addition influences antibacterial activity of bioactive glass coatings on metallic implants. Heliyon, 3 (10). e00420. ISSN 2405-8440

Rolak, M. and Che, H.S. and Malinowski, M. (2015) Modelling and fault-tolerant control of 5-phase induction machine. Bulletin of the Polish Academy of Sciences Technical Sciences, 63 (4). pp. 997-1006. ISSN 0239-7528

Rosdi, A.N. and Yee, L.K. and Purushothaman, M. and Ibrahim, S. and Pichiah, S. (2015) Preparation and characterization of zeolite polymer composite proton exchange membrane. Desalination and Water Treatment, 57 (1). pp. 1-9. ISSN 1944-3994

Roslan, H. and Shervin, M. and Arniza, F. (2012) Incorporation of eco-engineering technology in coastal protection: Opportunities and challenges. In: 2nd Conference for Regional Cooperation in Ocean and Earth Science Research in the South China Sea, 21-24 October 2012, University of Malaya, Kuala Lumpur, Malaysia.

Rosli, H.M. and Mokhlis, H. and Bakar, A.H.A. (2012) Optimal measurement placement using PSO for state estimation. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Rosli, H.M. and Mokhlis, H. and Naidu, K. and Jamian, J.J. and Bakar, A.H.A. (2014) Improving State Estimation Accuracy Through Incremental Meter Placement Using New Evolutionary Strategy. Arabian Journal for Science and Engineering, 39 (11). pp. 7981-7989. ISSN 1319-8025

Roushenas, Peiman and Ong, Zhi Chao and Ismail, Zubaidah and Majidnia, Zohreh and Ang, Bee Chin and Asadsangabifard, Mohammadjavad and Onn, Chiu Chuen and Tam, Jun Hui (2018) Operational parameters effects on photocatalytic reactors of wastewater pollutant: a review. Desalination and Water Treatment, 120. pp. 109-118. ISSN 1944-3994

Rowshon, Md Kamal and Iqbal, Mohammed Cairul and Mojid, Md Abdul and Amin, Mohd Soom Mohd and Lai, Sai Hin (2018) Optimization of equitable irrigation water delivery for a large-scale rice irrigation scheme. International Journal of Agricultural and Biological Engineering, 11 (5). pp. 160-166. ISSN 1934-6344

Roy, T. and Choudhury, D. and Azuddin, M. and Pingguan-Murphy, B. (2014) Fabrication and characterization of micro-dimple array on Al2O3 surfaces by using a micro-tooling. Ceramics International, 40 (1). pp. 2381-2388. ISSN 0272-8842

Roza, A. and Adji, B.M. and Raja Abdul Aziz, R.S. and UNSPECIFIED (2011) Mode preference of intercity travel by stated preference method: A case study in Malaysia. In: Proceedings of the Eastern Asia Society for Transportation Studies, 20-23 Jun 2011, Jeju, Korea.

Rusly, S.M. and Ibrahim, S. (2010) Adsorption of textile reactive dye by palm shell activated carbon: response surface methodology. World Academy of Science, Engineering and Technology, 43. pp. 892-895. ISSN 2010376X (ISSN)

S

Saad, M. and Cheng, H.L. and Halim, A. and Abu Bakar, D. (2008) Investigation of transient performance of capacitor voltage transformer (CVT). The Institution of Engineers, Malaysia, 71 (2). pp. 44-50.

Sabri, M.F.M. and Ono, T. and Said, S.M. and Kawai, Y. and Esashi, M. (2015) Fabrication and characterization of microstacked PZT actuator for MEMS applications. Journal of Microelectromechanical Systems, 24 (1). pp. 80-90. ISSN 1057-7157

Saddique, S.M. and Moghavvemi, M. and Tamjis, M.R. (1998) Novel concept of fine-tuned QFT control applied to a robot manipulator. International Journal of Modelling and Simulation, 18 (1). pp. 1-6. ISSN 02286203

Saeed, A. and Ruthramurthy, B. and Yong, W.H. and Hoong, O.B. and Ban, T.K. and Kwang, Y.H. (2015) Structural and dielectric properties of iron doped barium strontium titanate for storage applications. Journal of Materials Science: Materials in Electronics, 26 (12, SI). pp. 9859-9864. ISSN 0957-4522

Safari, A. and Mekhilef, S. (2011) Implementation of incremental conductance method with direct control. In: 2011 IEEE Region 10 Conference: Trends and Development in Converging Technology Towards 2020, TENCON 2011, Bali.

Safari, A. and Mekhilef, S. (2011) Incremental conductance MPPT method for PV systems. In: 2011 Canadian Conference on Electrical and Computer Engineering, CCECE 2011, Niagara Falls, ON.

Safari, A. and Mekhilef, S. (2011) Simulation and hardware implementation of incremental conductance MPPT with direct control method using cuk converter. IEEE Transactions on Industrial Electronics, 58 (4). pp. 1154-1161. ISSN 0278-0046

Safarzadeh, Marjan and Ramesh, Singh and Tan, Chou Yong and Chandran, Hari and Noor, Ahmad Fauzi Mohd and Krishnasamy, Sivakumar and Alengaram, Ubagaram Johnson and Ramesh, Subramaniam (2019) Effect of multi-ions doping on the properties of carbonated hydroxyapatite bioceramic. Ceramics International, 45 (3). pp. 3473-3477. ISSN 0272-8842

Safee, M.K.M. and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan and Ibrahim, Fatimah (2011) Activity of upper body muscles during bowing and prostration tasks in healthy subjects. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Safee, M.K.M. and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan and Ibrahim, Fatimah (2011) Activity of upper body muscles during bowing and prostration tasks in healthy subjects. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Safee, M.K.M. and Wan Abas, Wan Abu Bakar and Ibrahim, Fatimah and Abu Osman, Noor Azuan and Salahuddin, M.H.R. (2012) Electromyographic activity of the lower limb muscles during salat and specific exercises. Journal of Physical Therapy Science, 24 (6). pp. 549-552. ISSN 0915-5287

Safee, M.K.M. and Wan Abas, Wan Abu Bakar and Ibrahim, Fatimah and Abu Osman, Noor Azuan and Salahuddin, M.H.R. (2012) Electromyographic activity of the lower limb muscles during salat and specific exercises. Journal of Physical Therapy Science, 24 (6). pp. 549-552. ISSN 0915-5287

Safee, M.K.M. and Wan Abas, Wan Abu Bakar and Ibrahim, Fatimah and Abu Osman, Noor Azuan and Salahuddin, M.H.R. (2012) Electromyographic activity of the lower limb muscles during salat and specific exercises. Journal of Physical Therapy Science, 24 (6). pp. 549-552. ISSN 0915-5287

Safiuddin, M. and Alengaram, U.J. and Salam, M.A. and Jumaat, M.Z. and Jaafar, F.F. and Saad, H.B. (2011) Properties of high-workability concrete with recycled concrete aggregate. Materials Research-Ibero-American Journal of Materials, 14 (2). pp. 248-255. ISSN 1516-1439

Safiuddin, M. and Jumaat, M.Z. and Salam, M.A. (2012) Flowing ability of self-consolidating concrete and its binder paste phase including palm oil fuel ash. Magazine of Concrete Research, 64 (10). pp. 931-944. ISSN 0024-9831

Safiuddin, M. and Jumaat, Mohd Zamin and Salam, M.A. and Islam, M.S. and Hashim, R. (2010) Utilization of solid wastes in construction materials. International Journal of Physical Sciences, 5 (13). pp. 1952-1963. ISSN 1992-1950

Safiuddin, M. and Jumaat, Mohd Zamin and Salam, M.A. and Islam, M.S. and Hashim, Roslan (2010) Utilization of solid wastes in construction materials. International Journal of Physical Sciences, 5 (13). pp. 1952-1963. ISSN 19921950

Safiuddin, M. and Mahmud, H.B. and Jumaat, M.Z. (2011) Efficacy of ASTM saturation techniques for measuring the water absorption of concrete. Arabian Journal for Science and Engineering, 36 (5). pp. 761-768. ISSN 1319-8025

Safiuddin, M. and Md.Isa, M.H. and Jumaat, M.Z. (2011) Fresh properties of self-consolidating concrete incorporating palm oil fuel ash as a supplementary cementing material. Chiang Mai Journal of Science, 38 (3). pp. 389-404. ISSN 01252526

Safiuddin, M. and Rahman, M.M. and Salam, M.A. and Md.Isa, M.H. and Jumaat, M.Z. (2012) Properties of self-consolidating palm oil fuel ash concrete. Advanced Science Letters, 17 (1). pp. 312-319. ISSN 19366612

Safiuddin, M. and Salam, M.A. and Jumaat, M.Z. (2012) Correlations between different hardened properties of high-strength self-consolidating concrete including palm oil fuel ash. In: 2011 International Conference on Applied Mechanics, Materials and Manufacturing, ICAMMM 2011, 2012, Shenzhen.

Safiuddin, M. and Salam, M.A. and Jumaat, M.Z. (2011) Correlations between fresh properties of self-consolidating concrete including palm oil fuel ash. In: 1st International Conference on Civil Engineering, Architecture and Building Materials, CEABM 2011, Haikou.

Safiuddin, M. and Salam, M.A. and Jumaat, M.Z. (2011) Utilization of palm oil fuel ash in concrete: a review. Journal of Civil Engineering and Management, 17 (2). pp. 234-247. ISSN 13923730

Safiuddin, M.D. and Salam, M.A. and Jumaat, M.Z. (2011) Effects of recycled concrete aggregate on the fresh properties of self-consolidating concrete. Archives of Civil and Mechanical Engineering, 11 (4). pp. 1023-1041. ISSN 16449665

Sahari, B.B. and Shahzamanian, M.M. and Bayat, M. (2010) CAME 56 - Comparsion of thermoelastic results in two types of functionally graded brake disks. In: World Engineering Congress 2010, Malaysia Conference on Aerospace and Mechanical Engineering , August 2-5, 2010, Kuching,Sarawak, Malaysia. (Unpublished)

Said, S.H. and Razak, H.A. and Othman, I. (2015) Flexural behavior of engineered cementitious composite (ECC) slabs with polyvinyl alcohol fibers. Construction and Building Materials, 75. pp. 176-188. ISSN 0950-0618

Said, S.H. and Razak, Hashim Abdul (2015) The effect of synthetic polyethylene fiber on the strain hardening behavior of engineered cementitious composite (ECC). Materials & Design, 86. pp. 447-457. ISSN 0261-3069

Said, S.M. and Adikan, Faisal Rafiq Mahamd and Mekhilef, Saad and Rahim, N.A. (2005) Implementation of the problem-based learning approach in the Department of Electrical Engineering, University of Malaya. European Journal of Engineering Education, 30 (1). pp. 129-136. ISSN 0304-3797

Said, Z. and Sajid, M.H. and Alim, M.A. and Saidur, R. (2013) Viscosity data of al203/water and al2031 (eg/water) mixture nanofluids and the hysteresis phenomenon. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Said, Z. and Sajid, M.H. and Saidur, R. and Mahdiraji, G.A. and Rahim, N.A. (2015) Evaluating the optical properties of TiO2 nanofluid for a direct absorption solar collector. Numerical Heat Transfer Part a-Applications, 67 (9). pp. 1010-1027. ISSN 1040-7782

Saidur, R. (2009) Energy consumption, energy savings, and emission analysis in Malaysian office buildings. Energy Policy, 37 (10). pp. 4104-4113. ISSN 0301-4215

Saidur, R. (2011) Energy savings and emission reductions in industrial boilers. Thermal Science, 15 (3). pp. 705-719. ISSN 0354-9836

Saidur, R. (2010) Energy, economics and environmental analysis for chillers in office buildings. Energy Education Science and Technology Part a-Energy Science and Research, 25 (1-2). pp. 1-16. ISSN 1308-772X

Saidur, R. (2010) A review on electrical motors energy use and energy savings. Renewable and Sustainable Energy Reviews, 14 (3). pp. 877-898. ISSN 1364-0321

Saidur, R. (2010) A review on electrical motors energy use and energy savings. Renewable and Sustainable Energy Reviews, 14 (3). pp. 877-898. ISSN 1364-0321

Saidur, R. and Abdelaziz, E.A. and Demirbas, A. and Hossain, M.S. and Mekhilef, S. (2011) A review on biomass as a fuel for boilers. Renewable and Sustainable Energy Reviews, 15 (5). pp. 2262-2289. ISSN 1364-0321

Saidur, R. and Abdelaziz, E.A. and Hasanuzzaman, M. and Mamun, M.A.H. (2010) A study of energy efficiency, economic and environmental benefits of a cooling tower. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 87-94. ISSN 18230334

Saidur, R. and Atabani, A.E. and Mekhilef, S. (2011) A review on electrical and thermal energy for industries. Renewable and Sustainable Energy Reviews, 15 (4). pp. 2073-2086. ISSN 1364-0321

Saidur, R. and BoroumandJazi, G. and Mekhlif, S. and Jameel, M. (2012) Exergy analysis of solar energy applications. Renewable and Sustainable Energy Reviews, 16 (1). pp. 350-356. ISSN 1364-0321

Saidur, R. and BoroumandJazi, G. and Mekhlif, S. and Jameel, M. (2012) Exergy analysis of solar energy applications. Renewable and Sustainable Energy Reviews, 16 (1). pp. 350-356. ISSN 13640321

Saidur, R. and Boroumandjazi, G. and Mekhilef, S. and Mohammed, H.A. (2012) A review on exergy analysis of biomass based fuels. Renewable and Sustainable Energy Reviews, 16 (2). pp. 1217-1222. ISSN 1364-0321

Saidur, R. and Elcevvadi, E.T. and Mekhilef, S. and Safari, A. and Mohammed, H.A. (2011) An overview of different distillation methods for small scale applications. Renewable and Sustainable Energy Reviews, 15 (9). pp. 4756-4764. ISSN 1364-0321

Saidur, R. and Elcevvadi, E.T. and Mekhilef, S. and Safari, A. and Mohammed, H.A. (2011) An overview of different distillation methods for small scale applications. Renewable and Sustainable Energy Reviews, 15 (9). pp. 4756-4764. ISSN 1364-0321

Saidur, R. and Hasanuzzaman, M. (2009) Energy and environmental analysis of electrical motor in industrial boilers. In: 2009 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability, ICEE 2009, 2009, Malacca.

Saidur, R. and Hasanuzzaman, M. and Mahlia, T.M.I. and Rahim, N.A. and Mohammed, H.A. (2011) Chillers energy consumption, energy savings and emission analysis in an institutional buildings. Energy, 36 (8). pp. 5233-5238. ISSN 0360-5442

Saidur, R. and Hasanuzzaman, M. and Rahim, N.A. (2010) Energy use, energy savings and environmental analysis of industrial boilers and compressors. International Journal of Thermal & Environmental Engineering, 1 (1). pp. 29-36. ISSN 19237308

Saidur, R. and Hasanuzzaman, M. and Yogeswaran, S. and Mohammed, H.A. and Hossain, M.S. (2010) An end-use energy analysis in a Malaysian public hospital. Energy, 35 (12). pp. 4780-4785. ISSN 0360-5442

Saidur, R. and Hossain, M.S. and Islam, M.R. and Fayaz, H. and Mohammed, H.A. (2011) A review on kiln system modeling. Renewable and Sustainable Energy Reviews, 15 (5). pp. 2487-2500. ISSN 1364-0321

Saidur, R. and Husnawan, M. and Masjuki, Haji Hassan and Jahirul, M.I. and Mahlia, T.M.I. and Nasruddin, A.R. and Mekhilef, Saad and Ping, H.W. and Zamaluddin, M.F. (2009) Energy and electricity consumption analysis of Malaysian industrial sector. In: Proceedings of the Fourth International Conference on Thermal Engineering: Theory and Applications, 12-14 Jan 2009, Dubai, UAE. (Submitted)

Saidur, R. and Islam, M.R. and Rahim, N.A. and Solangi, K.H. (2010) A review on global wind energy policy. Renewable and Sustainable Energy Reviews, 14 (7). pp. 1744-1762. ISSN 1364-0321

Saidur, R. and Kazi, S.N. and Hossain, M.S. and Rahman, M.M. and Mohammed, H.A. (2011) A review on the performance of nanoparticles suspended with refrigerants and lubricating oils in refrigeration systems. Renewable and Sustainable Energy Reviews, 15 (1). pp. 310-323. ISSN 1364-0321

Saidur, R. and Lai, Y.K. (2011) Nanotechnology in vehicle's weight reduction and associated energy savings. Energy Education Science and Technology Part a-Energy Science and Research, 26 (2). pp. 87-101. ISSN 1308-772X

Saidur, R. and Lai, Y.K. (2010) Parasitic energy savings in engines using nanolubricants. Energy Education Science and Technology Part a-Energy Science and Research, 26 (1). pp. 61-74. ISSN 1308-772X

Saidur, R. and Leong, K.Y. and Mohammad, H.A. (2011) A review on applications and challenges of nanofluids. Renewable and Sustainable Energy Reviews, 15 (3). pp. 1646-1668. ISSN 13640321

Saidur, R. and Mahlia, T.M.I. (2010) Energy, economic and environmental benefits of using high-efficiency motors to replace standard motors for the Malaysian industries. Energy Policy, 38 (8). pp. 4617-4625. ISSN 0301-4215

Saidur, R. and Mahlia, T.M.I. (2011) Impacts of energy efficiency standard on motor energy savings and emission reductions. Clean Technologies and Environmental Policy, 13 (1). pp. 103-109. ISSN 1618-954X

Saidur, R. and Mahlia, T.M.I. and Hasanuzzaman, M. (2011) Developing energy performance standard, label and test procedures and impacts analysis for commercial chillers. Energy Education Science and Technology Part a-Energy Science and Research, 27 (1). pp. 175-190. ISSN 1308-772X

Saidur, R. and Mekhilef, S. (2010) Energy use, energy savings and emission analysis in the Malaysian rubber producing industries. Applied Energy, 87 (8). pp. 2746-2758. ISSN 03062619

Saidur, R. and Mekhilef, S. and Ali, M.B. and Safari, A. and Mohammed, H.A. (2012) Applications of variable speed drive (VSD) in electrical motors energy savings. Renewable & Sustainable Energy Reviews, 16 (1). pp. 543-550. ISSN 1364-0321

Saidur, R. and Mekhilef, S. and Ali, M.B. and Safari, A. and Mohammed, H.A. (2012) Applications of variable speed drive (VSD) in electrical motors energy savings. Renewable and Sustainable Energy Reviews, 16 (1). pp. 543-550. ISSN 13640321

Saidur, R. and Rahim, N.A. and Hasanuzzaman, M. (2010) A review on compressed-air energy use and energy savings. Renewable and Sustainable Energy Reviews, 14 (4). pp. 1135-1153. ISSN 1364-0321

Saidur, R. and Rahim, N.A. and Islam, M.R. and Solangi, K.H. (2011) Environmental impact of wind energy. Renewable and Sustainable Energy Reviews, 15 (5). pp. 2423-2430. ISSN 1364-0321

Saidur, R. and Sambandam, M.T. and Hasanuzzaman, M. and Devaraj, D. and Rajakarunakaran, S. (2012) An analysis of actual energy savings in an indian cement industry through an energy efficiency index. International Journal of Green Energy, 9 (8). pp. 829-840. ISSN 1543-5075

Saidur, R. and Sambandam, M.T. and Hasanuzzaman, M. and Devaraj, D. and Rajakarunakaran, S. (2012) An analysis of actual energy savings in an indian cement industry through an energy efficiency index. International Journal of Green Energy, 9 (8). pp. 829-840. ISSN 1543-5075

Saidur, R. and Sambandam, M.T. and Hasanuzzaman, M. and Devaraj, D. and Rajakarunakaran, S. and Islam, M.D. (2012) An energy flow analysis in a paper-based industry. Clean Technologies and Environmental Policy, 14 (5). pp. 905-916. ISSN 1618954X

Saidur, R. and Sattar, M.A. and Masjuki, Haji Hassan and Jamaluddin, M.Y. (2009) Greenhouse gas emissions from refrigeration equipment in Malaysia. Energy and Environment, 20 (4). pp. 533-551. ISSN 0958305X

Saidur, Rahman (2012) MHD natural convection in an enclosure from two semi-circular heaters on the bottom wall. International Journal of Heat and Mass Transfer, 55 (7-8). pp. 1844-1854. ISSN 0017-9310

Saidur, Rahman and Ahamed, Jamal Uddin and Masjuki, Haji Hassan (2010) Energy, exergy and economic analysis of industrial boilers. Energy Policy, 38 (5). pp. 2188-2197. ISSN 0301-4215

Saidur, Rahman and Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2008) Energy-efficient optical coating for flat glass. Journal of Applied Sciences, 8 (10). pp. 1883-1890. ISSN 1812-5654

Saidur, Rahman and Hasanuzzaman, M. and Hasan, M.M. and Masjuki, Haji Hassan (2009) Overall thermal transfer value of residential buildings in Malaysia. Journal of Applied Sciences, 9 (11). pp. 2130-2136. ISSN 18125654

Saidur, Rahman and Hasanuzzaman, M. and Sattar, M.A. and Masjuki, Haji Hassan and Badruddin, I.A. and Mohiuddin, A.K.M. (2007) An analysis of energy use, energy intensity and emissions at the industrial sector of Malaysia. International Journal of Mechanical and Materials Engineering, 2 (1). pp. 84-92. ISSN 1823-0334

Saidur, Rahman and Jahirul, M.I. and Hasanuzzaman, M. and Masjuki, Haji Hassan (2008) Analysis of exhaust emissions of natural gas engine by using response surface methodology. Journal of Applied Sciences, 8 (19). pp. 3328-3339. ISSN 1812-5654

Saidur, Rahman and Jahirul, M.I. and Moutushi, T.Z. and Imtiaz, H. and Masjuki, Haji Hassan (2007) Effect of partial substitution of diesel by natural gas on performance parameters of a four cylinder diesel engine. Journal of Power and Energy, 221. pp. 1-10.

Saidur, Rahman and Jahirul, M.I. and Moutushi, T.Z. and Imtiaz, H. and Masjuki, Haji Hassan (2007) Effect of partial substitution of diesel fuel by natural gas on performance parameters of a four-cylinder diesel engine. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221 (A1). pp. 1-10. ISSN 0957-6509

Saidur, Rahman and Khaliq, A.H.A. and Masjuki, Haji Hassan (2006) Analysis of energy and exergy use for process heating in the industrial sector of Malaysia. International Journal of Exergy, 3 (2). pp. 119-149. ISSN 1742-8297

Saidur, Rahman and Leong, W.B. and Masjuki, Haji Hassan and Jahirul, I. and Tamjis, M.R. (2005) Development and validation of emission model for a petrol engine using response surface methodology (RSM). Journal - The Institution of Engineers, Malaysia, 66 (4). pp. 44-51. ISSN 0126-513X

Saidur, Rahman and Masjuki, Haji Hassan (2008) Application of artificial neural networks to investigate the energy performance of household refrigerator-freezers. Journal of Applied Sciences, 8 (11). pp. 2142-2149. ISSN 1812-5654

Saidur, Rahman and Masjuki, Haji Hassan (2005) Different methods of grading or rating refrigerator freezers. Asian Journal on Energy & Environment, 6 (1). pp. 57-69. ISSN 1513-4121

Saidur, Rahman and Masjuki, Haji Hassan (2008) Energy and associated emission analysis in office buildings. International Journal of Mechanical and Materials Engineering, 3 (1). pp. 90-96. ISSN 1823-0334

Saidur, Rahman and Masjuki, Haji Hassan and Choudhury, I.A. (2002) Role of ambient temperature, door opening, thermostat setting position and their combined effect on refrigerator-freezer energy consumption. Energy Conversion and Management, 43 (6). pp. 845-854. ISSN 0196-8904

Saidur, Rahman and Masjuki, Haji Hassan and Eow, K.F. and Jamaluddin, M.Y. (2006) Actual usage conditions and energy consumption of refrigerator-freezers. International Energy Journal, 7 (2). pp. 103-124. ISSN 1513-718X

Saidur, Rahman and Masjuki, Haji Hassan and Hasanuzzaman, M. (2009) Perfromance of an improved solar car ventilator. International Journal of Mechanical and Materials Engineering, 4 (1). pp. 24-34. ISSN 1823-0334

Saidur, Rahman and Masjuki, Haji Hassan and Hasanuzzaman, M. and Kai, G.S. (2008) Investigation of energy performance and usage behavior of domestic refrigerator freezer using clustering and segmentation. Journal of Applied Sciences, 8 (21). pp. 3957-3962. ISSN 1812-5654

Saidur, Rahman and Masjuki, Haji Hassan and Hasanuzzaman, M. and Mahlia, T.M.I. and Tan, C.Y. and Ooi, J.K. and Yoon, P.H. (2008) Performance investigation of a solar powered thermoelectric refrigerator. International Journal of Mechanical and Materials Engineering, 3 (1). pp. 7-16. ISSN 1823-0334

Saidur, Rahman and Masjuki, Haji Hassan and Jamaluddin, M.Y. (2007) An application of energy and exergy analysis in residential sector of Malaysia. Energy Policy, 35 (2). pp. 1050-1063. ISSN 0301-4215

Saidur, Rahman and Masjuki, Haji Hassan and Jamaluddin, M.Y. (2006) A new approach to investigate the energy performance of a household refrigerator-freezer. International Energy Journal, 7 (1). pp. 13-23. ISSN 1513-718X

Saidur, Rahman and Masjuki, Haji Hassan and Jamaluddin, M.Y. and Ahmed, S. (2007) Energy and associated greenhouse gas emissions from household appliances in Malaysia. Energy Policy, 35 (3). pp. 1648-1657. ISSN 0301-4215

Saidur, Rahman and Masjuki, Haji Hassan and Jamaluddin, M.Y. and Yap, F.C. (2006) Actual usage conditions, energy savings and associated emission reductions of washing machines. Transactions Hong Kong Institution of Engineers, 13 (2). pp. 16-23. ISSN 1023697X

Saidur, Rahman and Masjuki, Haji Hassan and Mahlia, T.M.I. (2005) Labeling design effort for household refrigerator-freezers in Malaysia. Energy Policy, 33 (5). pp. 611-618. ISSN 0301-4215

Saidur, Rahman and Masjuki, Haji Hassan and Mahlia, T.M.I. and Nasrudin, A.R. (2002) Factors affecting refrigerator-freezers energy consumption. ASEAN Journal on Science and Technology for Development, 19 (2). pp. 57-68. ISSN 0217-5460

Saidur, Rahman and Meng, T.C. and Said, Z. and Hasanuzzaman, M. and Kamyar, A. (2012) Evaluation of the effect of nanofluid-based absorbers on direct solar collector. International Journal of Heat and Mass Transfer, 55 (21-22). pp. 5899-5907. ISSN 0017-9310

Saidur, Rahman and Meng, T.C. and Said, Z. and Hasanuzzaman, M. and Kamyar, A. (2012) Evaluation of the effect of nanofluid-based absorbers on direct solar collector. International Journal of Heat and Mass Transfer, 55 (21-22). 5899-5907. ISSN 0017-9310

Saidur, Rahman and Nasrudin, A.R. and Masjuki, Haji Hassan and Choudhury, I.A. and Mahlia, T.M.I. and Husnawan, M. (2004) Development of energy test procedure for household refrigerator-freezers in Malaysia. International Journal of Power and Energy Systems, 24 (1). pp. 46-55. ISSN 10783466

Saidur, Rahman and Nasrudin, A.R. and Masjuki, Haji Hassan and Mahlia, T.M.I. and Tamjis, M.R. (2002) Developing energy efficiency standard and its impact on refrigerator-freezers in Malaysia. Journal Mekanikal UTM (14). pp. 63-77.

Saidur, Rahman and Rahim, N.A. and Masjuki, Haji Hassan and Mekhilef, Saad and Hew, Wooi Ping and Jamaluddin, M.F. (2009) End-use energy analysis in the Malaysian industrial sector. Energy, 34 (2). pp. 153-158. ISSN 0360-5442

Saidur, Rahman and Rahim, N.A. and Ping, H.W. and Jahirul, M.I. and Mekhilef, Saad and Masjuki, Haji Hassan (2009) Energy and emission analysis for industrial motors in Malaysia. Energy Policy, 37 (9). pp. 3650-3658. ISSN 0301-4215

Saidur, Rahman and Rezaei, Mahdi and Muzammil, Wan Khairul and Masjuki, Haji Hassan and Paria, Saman and Hasanuzzaman, Md. (2012) Technologies to recover exhaust heat from internal combustion engines. Renewable & Sustainable Energy Reviews, 16 (8). pp. 5649-5659. ISSN 1364-0321

Saidur, Rahman and Sattar, M.A. and Hasanuzzaman, M. and Cheng, C.F. and Masjuki, Haji Hassan (2007) Open and closed door moisture transport and corresponding energy consumption in household refrigerator. Journal of Energy & Environment,, 6. pp. 18-27.

Saidur, Rahman and Sattar, M.A. and Izudin, A. and Masjuki, Haji Hassan (2006) Developing a comprehensive energy guide label for household appliances through consumers research survey. Journal of Energy & Environment,, 5. pp. 77-93.

Saidur, Rahman and Sattar, M.A. and Masjuki, Haji Hassan and Ahmed, S. and Hashim, U. (2007) An estimation of the energy and exergy efficiencies for the energy resources consumption in the transportation sector in Malaysia. Energy Policy, 35 (8). pp. 4018-4026. ISSN 0301-4215

Saifizul, A.A. and Yamanaka, H. and Karim, M.R. (2011) Empirical analysis of gross vehicle weight and free flow speed and consideration on its relation with differential speed limit. Accid Anal Prev, 43 (3). pp. 1068-1073. ISSN 0001-4575

Saifizul, A.A. and Zainon, Z. and Osman, N.A.A. and Azlan, C.A. and Ibrahim, U.F.S.U. (2006) Intelligent control for self-erecting inverted pendulum via adaptive neuro-fuzzy inference system. American Journal of Applied Sciences, 3 (4). pp. 1795-1802. ISSN 1546-9239

Saiful Islam, A.B.M. and Jameel, M. and Ahmad, Syed Ishtiaq and Jumaat, M.Z. (2011) Study on corollary of seismic base isolation system on buildings with soft storey. International Journal of Physical Sciences, 6 (11). pp. 2654-2661. ISSN 19921950

Saiful Islam, A.B.M. and Jameel, M. and Jumaat, M.Z. (2011) Effect of time elapse after wave hitting on coupled spar platform. International Journal of Physical Sciences, 6 (11). pp. 2671-2680. ISSN 19921950

Saiful Islam, A.B.M. and Jameel, M. and Jumaat, M.Z. and Shirazi, S.M. (2011) Spar platform at deep water region in Malaysian sea. International Journal of Physical Sciences, 6 (30). pp. 6872-6881. ISSN 19921950

Saiful Islam, A.B.M. and Jameel, M. and Rahman, M.A. and Jumaat, M.Z. (2011) Earthquake time history for Dhaka, Bangladesh as competent seismic record. International Journal of Physical Sciences, 6 (16). pp. 3921-3926. ISSN 19921950

Sairi, N.A. and Yusoff, R. and Alias, Y. and Aroua, M.K. (2011) Solubilities of CO 2 in aqueous N-methyldiethanolamine and guanidinium trifluoromethanesulfonate ionic liquid systems at elevated pressures. Fluid Phase Equilibria, 300 (1-2). pp. 89-94. ISSN 03783812

Sairi, N.A. and Yusoff, R. and Alias, Y. and Aroua, M.K. (2011) Solubilities of CO2 in aqueous N-methyldiethanolamine and guanidinium trifluoromethanesulfonate ionic liquid systems at elevated pressures. Fluid Phase Equilibria, 300 (1-2). pp. 89-94. ISSN 0378-3812

Sajadi, A. and Sebtahmadi, S.S. and Koniaka, M. and Biczel, P. and Mekhilef, S. (2012) Distributed control scheme for voltage regulation in smart grids. International Journal of Smart Grid and Clean Energy. ISSN 2315-4462

Sajedi, F. and Abdul Razak, H. (2010) Relationship between 7 and 28 days CSS1 for HSC2 by use of ANN3 and regression methods. Asian Journal of Civil Engineering, 11 (2). pp. 207-218. ISSN 15630854

Sajedi, F. and Abdul Razak, H. (2010) Thermal activation of ordinary Portland cement-slag mortars. Materials & Design, 31 (9). pp. 4522-4527. ISSN 0261-3069

Sajedi, F. and Razak, H.A. (2011) Comparison of different methods for activation of ordinary Portland cement-slag mortars. Construction and Building Materials, 25 (1). pp. 30-38. ISSN 0950-0618

Sajedi, F. and Razak, H.A. (2011) Effects of curing regimes and cement fineness on the compressive strength of ordinary Portland cement mortars. Construction and Building Materials, 25 (4). pp. 2036-2045. ISSN 0950-0618

Sajedi, F. and Razak, H.A. (2011) Effects of thermal and mechanical activation methods on compressive strength of ordinary Portland cement-slag mortar. Materials & Design, 32 (2). pp. 984-995. ISSN 0261-3069

Sajedi, F. and Razak, H.A. (2010) The effect of chemical activators on early strength of ordinary Portland cement-slag mortars. Construction and Building Materials, 24 (10). pp. 1944-1951. ISSN 0950-0618

Sajedi, F. and Razak, H.A. and Mahmud, H.B. and Shafigh, P. (2012) Relationships between compressive strength of cement-slag mortars under air and water curing regimes. Construction and Building Materials, 31. pp. 188-196. ISSN 09500618

Sajjadi, B. and Abdul Aziz, A.R. and Baroutian, S. and Ibrahim, Shaliza (2014) Investigation of convection and diffusion during biodiesel production in packed membrane reactor using 3D simulation. Journal of Industrial and Engineering Chemistry, 20 (4). pp. 1493-1504. ISSN 1226-086X

Sajjadi, B. and Abdul Raman, A.A. and Baroutian, S. and Ibrahim, S. and Raja Ehsan Shah, R.S.S. (2014) 3D Simulation of fatty acid methyl ester production in a packed membrane reactor. Fuel Processing Technology (118). pp. 7-19.

Sajjadi, B. and Abdul Raman, A.A. and Baroutian, S. and Ibrahim, S. and Raja Ehsan Shah, R.S.S. (2014) 3D Simulation of fatty acid methyl ester production in a packed membrane reactor. Fuel Processing Technology, 118. pp. 7-19. ISSN 0378-3820

Sajjadi, B. and Abdul Raman, A.A. and Ibrahim, S. and Shah, R.S.S.R.E. (2012) Review on gas-liquid mixing analysis in multiscale stirred vessel using CFD. Reviews in Chemical Engineering, 28 (2-3). pp. 171-189. ISSN 0167-8299

Sajjadi, B. and Abdul Raman, A.A. and Shah, R.S.S.R.E. and Ibrahim, S. (2013) Review on Applicable breakup/coalescence models in turbulent liquid-liquid flows. Reviews in Chemical Engineering, 29 (3). pp. 131-158. ISSN 0167-8299

Sajjadi, B. and Abdul Raman, Abdul Aziz and Baroutian, S. and Ibrahim, Shaliza (2014) Investigation of convection and diffusion during biodiesel production in packed membrane reactor using 3D simulation. Journal of Industrial and Engineering Chemistry, 20 (4). pp. 1493-1504. ISSN 1226-086X

Sajjadi, B. and Asaithambi, P. and Abdul Aziz, A.R. and Ibrahim, S. (2016) Mathematical analysis of the effects of operating conditions and rheological behaviour of reaction medium on biodiesel synthesis under ultrasound irradiation. Fuel, 184. pp. 637-647. ISSN 0016-2361

Sajjadi, B. and Davoody, M. and Abdul Raman, Abdul Aziz and Ibrahim, Shaliza (2017) Analysis and Optimization of Ultrasound-Assisted Alkaline Palm Oil Transesterification by RSM and ANN-GA. Chemical Engineering Communications, 204 (3). pp. 365-381. ISSN 0098-6445

Sakmani, A.S. and Lam, W.H. and Hashim, Roslan and Chong, H.Y. (2013) Site selection for tidal turbine installation in the Strait of Malacca. Renewable and Sustainable Energy Reviews, 21. pp. 590-602. ISSN 13640321

Salahuddin, M.H.R. and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan and Ibrahim, Fatimah and Rahim, R.B.A. (2008) Preliminary study: The impact of moderate exercises on biomechanical response of the humans muscles. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Salahuddin, M.H.R. and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan and Ibrahim, Fatimah and Rahim, R.B.A. (2008) Preliminary study: the impact of moderate exercises on biomechanical response of the humans muscles. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Salam, Mohammed Abdus and Safiuddin, Md. and Jumaat, Mohd Zamin (2018) Durability Indicators for Sustainable Self-Consolidating High-Strength Concrete Incorporating Palm Oil Fuel Ash. Sustainability, 10 (7). p. 2345. ISSN 2071-1050

Salam, Z. and Amjad, M. and Facta, M. and Mekhilef, S. (2013) Analysis and implementation of transformerless LCL resonant power supply for ozone generation. IEEE Transactions on Power Electronics, 28 (2). pp. 650-660. ISSN 0885-8993

Salbiah, S. and Somaya, A. and Arof, Hamzah and Saleh, Z.S. and Ibrahim, Fatimah (2012) A new approach to medical image stitching using minimum average correlation energy filter and peak to side-lobe ratio. International Journal of Imaging Systems and Technology, 22 (3). pp. 166-171. ISSN 0899-9457

Salbiah, S. and Somaya, A. and Arof, Hamzah and Saleh, Z.S. and Ibrahim, Fatimah (2012) A new approach to medical image stitching using minimum average correlation energy filter and peak to side-lobe ratio. International Journal of Imaging Systems and Technology, 22 (3). pp. 166-171. ISSN 0899-9457

Saleem, M. and Chakrabarti, M.H. and Abdul Raman, A.A. and Hasan, D.B. and Daud, W.M.A.W. and Mustafa, A. (2012) Hydrogen production by Chlamydomonas reinhardtii in a two-stage process with and without illumination at alkaline pH. International Journal of Hydrogen Energy, 37 (6). pp. 4930-4934. ISSN 0360-3199

Saleem, M. and Chakrabarti, M.H. and Hasan, D.B. and Islam, M.S. and Yussof, R. and Hajimolana, S.A. and Hussain, M.A. and Khan, G.M.A. and Ali, B.S. (2012) On site electrochemical production of sodium hypochlorite disinfectant for a power plant utilizing seawater. International Journal of Electrochemical Science, 7 (5). pp. 3929-3938. ISSN 1452-3981

Saleem, M. and Chakrabarti, M.H. and Irfan, M.F. and Hajimolana, S.A. and Hussain, M.A. and Diya'uddeen, B.H. and Daud, W.M.A.W. (2011) Electrokinetic remediation of nickel from low permeability soil. International Journal of Electrochemical Science, 6 (9). pp. 4264-4275. ISSN 1452-3981

Saleem, M. and Essa, M.H. and Chakrabarti, M.H. and Low, C.T.J. and Hajimolana, S.A. and Hussain, M.A. and Hashim, M.A. and Islam, M.S. (2012) An economical means for remediating a multiple-metal contaminated soil using electro-kinetic technology under natural conditions. International Journal of Electrochemical Science, 7 (9). pp. 7809-7822. ISSN 1452-3981

Salehi, M. and Bahreininejad, A. and Nakhai, I. (2011) On-line analysis of out-of-control signals in multivariate manufacturing processes using a hybrid learning-based model. Neurocomputing, 74 (12-13). pp. 2083-2095. ISSN 0925-2312

Salih, A.L. and Moghavvemi, M. and Mohamed, H.A.F. and Gaeid, K.S. (2010) Flight PID controller design for a UAV quadrotor. Scientific Research and Essays, 5 (23). pp. 3660-3667. ISSN 19922248

Salih, A.L. and Moghavvemi, M. and Mohamed, H.A.F. and Gaeid, K.S. (2010) Modelling and PID controller design for a quadrotor unmanned air vehicle. In: 17th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2010, 28-30 May 2010, Cluj-Napoca, Romania.

Salih, Y.K. and See, O.H. and Ibrahim, R.W. (2016) An intelligent selection method based on game theory in heterogeneous wireless networks. Transactions on Emerging Telecommunications Technologies, 27 (12). pp. 1641-1652. ISSN 2161-3915

Salleh, N.A. and Lim, K.S. and Ibrahim, F. (2009) AR modeling as EEG spectral analysis on prostration. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.

Salleh, N.M. and Kamaruzzaman, S.N. and Riley, M. and Zawawi, E.M.A. and Sulaiman, R. (2015) A quantitative evaluation of indoor environmental quality in refurbished kindergarten buildings: a Malaysian case study. Building and Environment, 94 (2). pp. 723-733. ISSN 0360-1323

Salman, F.A. and Fattah, M.Y. and Mohammed, M.M. and Hashim, Roslan (2010) Numerical investigation on reinforcement requirement for piles embedded in clay. Scientific Research and Essays, 5 (18). pp. 2731-2741. ISSN 19922248

Salman, F.A. and Mohammed, M.M. and Shirazi, S.M. and Jameel, Mohammed (2010) Reinforcement in concrete piles embedded in sand. International Journal of the Physical Sciences, 5 (15). pp. 2259-2271. ISSN 1992-1950

Samsudin, S. and Adwan, S. and Arof, Hamzah and Mokhtar, Norrima and Ibrahim, F. (2012) Development of automated image stitching system for radiographic images. Journal of Digital Imaging, 26 (2). pp. 361-70. ISSN 0897-1889

Samsudin, S.S. and Mokhtar, Norrima and Arof, Hamzah and Ibrahim, F. and Iwahashi, M. (2011) Blind user indoor environment mapping system for self-localization. In: 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011, 2011, Xi'an.

Samsuri, Norhakimah Md and Harun, Sulaiman Wadi and Ahmad, Harith (2004) Comparison of performances between partial double-pass and full double-pass systems in two-stage L-band EDFA. Laser Physics Letters, 1 (12). pp. 610-612. ISSN 1612-2011

Sani, Y.M. and Daud, W.M.A.W. and Abdul Raman, A.A. (2013) Biodesel feedstock and production technologies: successes, challenges and prospects. In: Biodesel-Feedstock, Production and aplications. InTech, pp. 77-101. ISBN 978-953-51-0910-5

Sankaran, Revathy and Manickam, Sivakumar and Yap, Yee Jiun and Ling, Tau Chuan and Chang, Jo-Shu and Show, Pau Loke (2018) Extraction of proteins from microalgae using integrated method of sugaring-out assisted liquid biphasic flotation (LBF) and ultrasound. Ultrasonics Sonochemistry, 48. pp. 231-239. ISSN 1350-4177

Sarmldi, Mohamad Rojl and Aziz, Ramlan and Hussain, Mohammed Azlan and Daud, Wan Ramli Wan (2001) Overview petrochemical based industries in Malaysia. ASEAN Journal of Chemical Engineering, 1 (1). pp. 7-16. ISSN 1655-4418

Sathiyan, S. and Ahmad, Harith and Chong, W.Y. and Lee, S.H. and Sivabalan, S. (2015) Evolution of the Polarizing Effect of MoS2. IEEE Photonics Journal, 7 (6). p. 6100610. ISSN 1943-0655

Sattar, M.A. and Saidur, Rahman and Masjuki, Haji Hassan (2007) Butane, isobutane and their mixtures as an alterantives to R-134a in domestic refrigerator. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 154-160. ISSN 18230334

Sattar, M.A. and Saidur, Rahman and Masjuki, Haji Hassan (2008) Experimental investigation on the performance of domestic refrigerator using isobutane and mixture of propane, butane and isobutene. AU Journal.

Sattar, M.A. and Saidur, Rahman and Masjuki, Haji Hassan (2007) Performance investigation of domestic refrigerator using pure hydrocarbons and blends of hydrocarbons as refrigerants. In: Proceedings of World Academy of Science, Engineering and Technology, 2007.

Sattar, M.A. and Saidur, Rahman and Masjuki, Haji Hassan (2007) Pure Butane as refrigerant in domestic refrigerator freezer. Greater Mekong Subregion Academic And Research Network, 2. pp. 29-34. ISSN 1905-9094

Seera, M. and Lim, C.P. and Liew, W.S. and Lim, E. and Loo, C.K. (2015) Classification of electrocardiogram and auscultatory blood pressure signals using machine learning models. Expert Systems with Applications, 42 (7). pp. 3643-3652. ISSN 0957-4174

Sen Gupta, I. and Ibrahim, S. and Ramachandran, K.B. (2001) Production of 2,3-butanediol from blackstrap molasses. Chemie-Ingenieur-Technik, 73 (6). p. 654. ISSN 0009286X

Seon, H.T. and Mohd Rafie, J. and Iskandar, I.Y. (2013) Synthesis and characterization of nanostructured Co-Pt magnetic films electrodeposited from tartrate-stabilized chloride baths. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Sethu, V.S. and Aziz, A.R. and Aroua, M.K. (2008) Recovery and reutilisation of copper from metal hydroxide sludges. Clean Technologies and Environmental Policy, 10 (2). pp. 131-136. ISSN 1618-954X

Seyedzadeh, S. and Moghaddasi, M. and Anas, S.B.A. (2016) Effects of fibre impairments in variable weight optical code division multiple access system. IET Optoelectronics, 10 (6). pp. 221-226. ISSN 1751-8768

Seyedzadeh Kharazi, S.M.S. and Amouzad Mahdiraji, G. and Sahbudin, R.K.Z. and Mokhtar, M. and Abas, A.F. and Anas, S.B.A. (2011) Performance analysis of a variable-weight OCDMA system under the impact of fiber impairments. In: Photonics (ICP), 2011 IEEE 2nd International Conference on, 2011.

Shafeeyan, M.S. and Daud, W.M.A.W. and Houshmand, A. and Shamiri, A. (2010) A review on surface modification of activated carbon for carbon dioxide adsorption. Journal of Analytical and Applied Pyrolysis, 89. pp. 143-151.

Shafeeyan, M.S. and Daud, W.M.A.W. and Shamiri, A. (2013) A review of mathematical modeling of fixed-bed columns for carbon dioxide adsorption. Chemical Engineering Research and Design. pp. 1-28.

Shafeeyan, M.S. and Daud, W.M.A.W. and Shamiri, A. and Aghamohammadi, N. (2015) Adsorption equilibrium of carbon dioxide on ammonia-modified activated carbon. Chemical Engineering Research & Design, 104. pp. 42-52. ISSN 0263-8762

Shafigh, P. and Jumaat, M.Z. and Bin Mahmud, H. and Hamid, N.A.A. (2012) Lightweight concrete made from crushed oil palm shell: tensile strength and effect of initial curing on compressive strength. Construction and Building Materials, 27 (1). pp. 252-258. ISSN 0950-0618

Shafigh, P. and Jumaat, M.Z. and Mahmud, H. (2010) Mix design and mechanical properties of oil palm shell lightweight aggregate concrete: a review. International Journal of the Physical Sciences, 5 (14). pp. 2127-2134. ISSN 1992-1950

Shafigh, P. and Jumaat, M.Z. and Mahmud, H. (2011) Oil palm shell as a lightweight aggregate for production high strength lightweight concrete. Construction and Building Materials, 25 (4). pp. 1848-1853. ISSN 0950-0618

Shafigh, P. and Jumaat, M.Z. and Mahmud, H.B. (2012) Effect of replacement of normal weight coarse aggregate with oil palm shell on properties of concrete. Arabian Journal for Science and Engineering, 37 (4). pp. 955-964. ISSN 13198025

Shafigh, P. and Jumaat, M.Z. and Mahmud, H.B. and Alengaram, U.J. (2013) Oil palm shell lightweight concrete containing high volume ground granulated blast furnace slag. Construction and Building Materials, 40. pp. 231-238. ISSN 09500618

Shafigh, P. and Jumaat, M.Z. and Mahmud, H.B. and Alengaram, U.J. (2011) A new method of producing high strength oil palm shell lightweight concrete. Materials & Design, 32 (10). pp. 4839-4843. ISSN 0261-3069

Shafigh, P. and Jumaat, M.Z. and Mahmud, H.B. and Alengaram, U.J. (2011) A new method of producing high strength oil palm shell lightweight concrete. Materials and Design, 32 (10). pp. 4839-4843. ISSN 0261-3069

Shafigh, P. and Mahmud, H. and Jumaat, M.Z. (2011) Effect of steel fiber on the mechanical properties of oil palm shell lightweight concrete. Materials & Design, 32 (7). pp. 3926-3932. ISSN 0261-3069

Shafigh, P. and Mahmud, H.B. and Jumaat, M.Z. (2012) Oil palm shell lightweight concrete as a ductile material. Materials and Design, 36. pp. 650-654. ISSN 02613069

Shafigh, P. and Nomeli, M.A. and Alengaram, U.J. and Mahmud, H.B. and Jumaat, M.Z. (2016) Engineering properties of lightweight aggregate concrete containing limestone powder and high volume fly ash. Journal of Cleaner Production, 135. pp. 148-157. ISSN 0959-6526

Shafigh, Payam and Lee, Jin Chai and Mahmud, Hilmi and Nomeli, Mohammad A. (2018) A comparison study of the fresh and hardened properties of normal weight and lightweight aggregate concretes. Journal of Building Engineering, 15. pp. 252-260. ISSN 2352-7102

Shafigh, Payam and Salleh, Salmaliza and Ghafari, Hafez and Mahmud, Hilmi (2018) Oil palm shell as an agricultural solid waste in artificial lightweight aggregate concrete. European Journal of Environmental and Civil Engineering, 22 (2). pp. 165-180. ISSN 2116-7214

Shah, S.N.R. and Ramli Sulong, Nor Hafizah and El-Shafie, Ahmed (2018) New approach for developing soft computational prediction models for moment and rotation of boltless steel connections. Thin-Walled Structures, 133. pp. 206-215. ISSN 0263-8231

Shahabuddin, N.S. and Awang, N.A. and Ahmad, Harith and Arof, Hamzah and Dimyati, K. and Yusoff, Z. and Harun, Sulaiman Wadi (2012) Supercontinuum generation using a passive mode-locked stretched-pulse bismuth-based erbium-doped fiber laser. Optics and Laser Technology, 44. pp. 741-743. ISSN 0030-3992

Shahariari, A. and Mokhlis, H. and Bin Abu Bakar, A.H. and Karimi, M. (2011) The numerical estimation method of series FACTS compensator based on injection model of voltage source inverter. In: Industrial Electronics and Applications (ISIEA), 2011 IEEE Symposium on, 2011, Langkawi, Malaysia.

Shahidul Islam, M. and Hashim, Roslan (2009) Bearing capacity of stabilized peat column using hand operated cone penetrometer. Journal of Applied Sciences, 9 (10). pp. 1968-1973. ISSN 18125654

Shahidul Islam, M. and Hashim, Roslan (2010) Stabilization of peat soil by soil-column technique and settlement of the group columns. International Journal of Physical Sciences, 5 (9). pp. 1411-1418. ISSN 19921950

Shahla, S. and Cheng, N.G. and Yusoff, R. (2010) An overview on transesterification of natural oils and fats. Biotechnology and Bioprocess Engineering, 15 (6). pp. 891-904. ISSN 1226-8372

Shahla, S. and Ngoh, G.C. and Yusoff, R. (2012) Optimization of base-catalyzed ethyl ester production from palm oil. Asia-Pacific Journal of Chemical Engineering, 7. S20-S25. ISSN 1932-2135

Shahla, S. and Ngoh, G.C. and Yusoff, R. (2012) The evaluation of various kinetic models for base-catalyzed ethanolysis of palm oil. Bioresource Technology, 104. pp. 1-5. ISSN 0960-8524

Shahriari, A. and Bakar, A.H.A. and Mokhlis, H. (2010) Comparative studies on Non-Divergent Load flow methods in well, ill and unsolvable condition. In: Power System Technology (POWERCON), 2010 International Conference on, 2010.

Shahriari, A. and Mokhlis, H. and Bakar, A.H.A. (2012) Critical reviews of Load flow methods for well, ill and unsolvable condition. Journal of Electrical Engineering-Elektrotechnicky Casopis, 63 (3). pp. 144-152. ISSN 1335-3632

Shahriari, A. and Mokhlis, H. and Bakar, A.H.A. and Illias, H.A. (2014) Optimal multiplier load flow method using concavity theory. Applied Mathematics and Computation, 245. pp. 487-503. ISSN 0096-3003

Shahriari, A. and Mokhlis, H. and Bakar, A.H.A. and Karimi, M. and Aman, M.M. (2012) The non-divergence Newton-based Load Flow Method in ill conditioned system. International Journal of Scientific & Engineering Research, 3 (6). pp. 1-6. ISSN 2229-5518

Shahriari, A. and Mokhlis, H. and Bakar, A.H.A. and Karimi, M. and Illias, H.A. (2012) Application of state space search method to find a low voltage solution for ill-conditioned system. Przeglad Elektrotechniczny, 88 (12 A). pp. 247-250. ISSN 0033-2097

Shahriari, A. and Mokhlis, H. and Bakar, A.H.A. and Karimi, M. and Laghari, J.A. and Kazeminezad, M. (2012) The calculation of low voltage solution based on state space search method in ill-conditioned system. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Shahriari, A. and Mokhlis, H. and Karimi, M. and Abu Bakar, A.H. and Illias, H.A. and Kazeminejad, M. and Palizban, O. (2013) Numerical estimation of inter line power flow controller based on injection model of synchronous voltage sources. Przegląd Elektrotechniczny, 89 (3 A). pp. 121-125. ISSN 00332097

Shahriari, A. and Mokhlis, H. and Karimi, M. and Bakar, A.H.A. and Illias, H.A. (2014) Quadratic Discriminant Index for Optimal Multiplier Load Flow Method in ill conditioned system. International Journal of Electrical Power & Energy Systems, 60. pp. 378-388. ISSN 0142-0615

Shahzamanian, M.M. and Sahari, B.B. and Bayat, M. and Mustapha, F. and Ismarrubie, Z.N. and Shahrjerdi, A. (2010) Steady state and thermoelastic analysis of a functionally graded rotating disk. In: World Engineering Congress 2010, Malaysia Conference on Aerospace and Mechanical Engineering , August 2-5, 2010, Kuching,Sarawak, Malaysia.

Shamiri, A. and Hussain, M.A. and Mjalli, F.S. (2011) Two phase dynamic model for gas phase propylene copolymerization in fluidized bed reactor. In: 6th International Conference on Diffusion in Solids and Liquids, DSL-2010, 2011, Paris.

Shamiri, A. and Hussain, M.A. and Mjalli, F.S. and Mostoufi, N. (2010) Different hydrodynamic model for gas-phase propylene polymemation in a catalytic fluidized bed reactor. In: 2nd International Conference on Chemical, Biological and Environmental Engineering, ICBEE 2010, 2010, Cairo.

Shamiri, A. and Hussain, M.A. and Mjalli, F.S. and Mostoufi, N. (2012) Improved single phase modeling of propylene polymerization in a fluidized bed reactor. Computers & Chemical Engineering, 36 (1). pp. 35-47. ISSN 0098-1354

Shamiri, A. and Hussain, M.A. and Mjalli, F.S. and Mostoufi, N. (2010) Kinetic modeling of propylene homopolymerization in a gas-phase fluidized-bed reactor. Chemical Engineering Journal, 161 (1-2). pp. 240-249. ISSN 1385-8947

Shamiri, A. and Hussain, M.A. and Mjalli, F.S. and Mostoufi, N. and Hajimolana, S. (2013) Dynamics and predictive control of gas phase propylene polymerization in fluidized bed reactors. Chinese Journal of Chemical Engineering, 21 (9). pp. 1015-1029.

Shamiri, A. and Hussain, M.A. and Mjalli, F.S. and Mostoufi, N. and Shafeeyan, M.S. (2011) Dynamic modeling of gas phase propylene homopolymerization in fluidized bed reactors. Chemical Engineering Science. pp. 1189-1199.

Shamsudin, N.H. and Latiff, A.A. and Abas, N. and Mokhlis, H. and Awalin, L.J. (2012) Three phase fault algorithm in distribution system by using database approach and impedance based method. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Sharif, N.M. and Yusoff, N.M. and Mohd. Izhar, M.A. and Ahmad, F. and Harun, Sulaiman Wadi and Ahmad, Harith (2016) Generation of Q-switched thulium-doped fiber laser (TDFL) using differentsaturable absorbers. Jurnal Teknologi, 78 (5-9). pp. 97-103. ISSN 0127-9696

Sharizli, A.A. and Zabir, F.A. and Osman, N.A.A. and Radzi, Z. and Shaifizul, A.A. (2007) Preliminary design of an automated rapid maxillary expander for dento-facial application. Journal of Biomechanics, 40 (2). p. 459. ISSN 0021-9290

Shasmin, H.N. and Abu Osman, Noor Azuan and Latif, L.A. and Usman, J. and Wan Abas, Wan Abu Bakar (2007) A new pylon materials in transtibial prosthesis: a preliminary study. Journal of Biomechanics, 40 (2). p. 297. ISSN 0021-9290

Shasmin, H.N. and Abu Osman, Noor Azuan and Razali, R. and Usman, J. and Wan Abas, Wan Abu Bakar (2007) The effect of load carriage among primary school boys: a preliminary study. Journal of Mechanics in Medicine and Biology, 7 (3). pp. 265-274. ISSN 0219-5194

Shasmin, H.N. and Abu Osman, Noor Azuan and Razali, R. and Usman, J. and Wan Abas, Wan Abu Bakar (2007) The effect of load carriage among primary school boys: a preliminary study. Journal of Mechanics in Medicine and Biology, 7 (3). pp. 265-274. ISSN 0219-5194

Shasmin, H.N. and Abu Osman, Noor Azuan and Razali, R. and Usman, J. and Wan Abas, Wan Abu Bakar (2007) The effect of load carriage among primary school boys: a preliminary study. Journal of Mechanics in Medicine and Biology, 7 (3). pp. 265-274. ISSN 0219-5194

Shasmin, H.N. and Abu Osman, Noor Azuan and Razali, R. and Usman, J. and Wan Abas, Wan Abu Bakar (2007) A preliminary study of acceptable load carriage for primary school children. 3rd Kuala Lumpur International Conference on Biomedical Engineering 2006. pp. 171-174.

Shawon, M.J. and Mahdiraji, G.A. and Hasan, M.M. and Shakibaei, B.H. and Gang, S.Y. and Mahdy, M.R.C. and Adikan, Faisal Rafiq Mahamd (2015) Single Negative Metamaterial-Based Hollow-Core Bandgap Fiber With Multilayer Cladding. IEEE Photonics Journal, 7 (6). ISSN 1943-0655

Shekarchian, M. and Moghavvemi, M. and Mahlia, T.M.I. and Mazandarani, A. (2011) A review on the pattern of electricity generation and emission in Malaysia from 1976 to 2008. Renewable and Sustainable Energy Reviews, 15 (6). pp. 2629-2642. ISSN 13640321

Shekarchian, M. and Moghavvemi, M. and Motasemi, F. and Mahlia, T.M.I. (2012) Cost benefit analysis and energy savings of using compression and absorption chillers for air conditioners in hot and humid climates. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011, 3-4 October 2011, Melaka, Malaysia.

Shekarchian, M. and Moghavvemi, M. and Motasemi, F. and Mahlia, T.M.I. (2013) Energy savings and cost-benefit analysis of using compression and absorption chillers for air conditioners in Iran. Renewable and Sustainable Energy Reviews, 15 (4). pp. 1950-1960. ISSN 1364-0321

Shekarchian, M. and Moghavvemi, M. and Motasemi, F. and Zarifi, F. and Mahlia, T.M.I. (2012) Energy and fuel consumption forecast by retrofitting absorption cooling in Malaysia from 2012 to 2025. Renewable and Sustainable Energy Reviews, 16 (8). 6128-6141. ISSN 13640321

Shekarchian, M. and Moghavvemi, M. and Rismanchi, B. and Mahlia, T.M.I. and Olofsson, T. (2012) The cost benefit analysis and potential emission reduction evaluation of applying wall insulation for buildings in Malaysia. Renewable and Sustainable Energy Reviews, 16 (7). pp. 4708-4718. ISSN 13640321

Shekarchian, M. and Zarifi, F. and Moghavvemi, M. and Motasemi, F. and Mahlia, T.M.I. (2013) Energy, exergy, environmental and economic analysis of industrial fired heaters based on heat recovery and preheating techniques. Energy Conversion and Management, 71. pp. 51-61. ISSN 0196-8904

Shiman, F. and Molaei, F. and Oladazimi, M. and Abd Rashid, R. and Habil, H. and Ibrahim, F. (2012) Electro-acupuncture (EA) as an adjunct therapy to methadone maintenance treatment (MMT) in heroin addiction: a study of 2D EEG power spectral topography and Morlet wavelet. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Shiman, F. and Safavi, S.H. and Vaneghi, F.M. and Oladazimi, M. and Safari, M.J. and Ibrahim, F. (2012) EEG feature extraction using parametric and non-parametric models. In: IEEE-EMBS International Conference on Biomedical and Health Informatics, BHI 2012. In Conj. with the 8th Int. Symp.on Medical Devices and Biosensors and the 7th Int. Symp. on Biomedical and Health Engineering, 2012, Hong Kong and Shenzhen.

Shin, E.W. and Han, J.S. and Jang, M. and Min, S.H. and Park, J.K. and Rowell, R.M. (2004) Phosphate adsorption on aluminum-impregnated mesoporous silicates: surface structure and behavior of adsorbents. Environmental Science and Technology, 38 (3). pp. 912-917. ISSN 0013-936X

Shirazi, S.M. and Akib, S. and Salman, F.A. and Alengaram, U.J. and Jameel, M. (2010) Agroecological aspects of groundwater utilization: A case study. Scientific Research and Essays, 5 (18). pp. 2786-2795. ISSN 1992-2248

Shirazi, S.M. and Hasen, I. and Sholichin, M. and UNSPECIFIED (2011) Investigation of groundwater potential in Melaka district of Malaysia. In: International Conference on Civil Engineering, Architecture and Building Materials (CEABM 2011), 18-20 June 2011, Haikou, China. (Submitted)

Shirazi, S.M. and Islam, M.A. and Ismail, Z. and Jameel, M. and Alengaram, U.J. and Mahrez, A. (2011) Arsenic contamination of aquifers: a detailed investigation on irrigation and portability. Scientific Research and Essays, 6 (5). pp. 1089-1100. ISSN 1992-2248

Shirazi, S.M. and Sholichin, M. and Jameel, Mohammed and Akib, Shatirah and Azizi, Mokhtar (2011) Effects of different irrigation regimes and nitrogenous fertilizer on yield and growth parameters of maize. International Journal of Physical Sciences, 6 (4). pp. 677-683. ISSN 1992-1950

Sholichin, M. and Othman, F. and Shirazi, S.M. and Akib, S. and Harisuseno, D. and Sisinggih, D. (2011) Applied AVSWAT 2000 for assessment of pollutant load in Brantas River Basin, Indonesia. In: International Conference on Civil Engineering, Architecture and Building Materials (CEABM 2011), 18-20 June 2011, Haikou, China. (Submitted)

Shorowordi, Kazi Md and Haseeb, A.S. Md. Abdul and Celis, Jean Pierre (2006) Chemical and structural nature of tribo-surface of aluminium-SiC composites at nanometre and micrometre length scales. Materials Science and Engineering A, 425 (1-2). pp. 213-218. ISSN 0921-5093

Shorowordi, Kazi Md and Haseeb, A.S. Md. Abdul and Celis, Jean Pierre (2006) Tribo-surface characteristics of Al-B4C and Al-SiC composites worn under different contact pressures. Wear, 261 (5-6). pp. 634-641. ISSN 0043-1648

Shorowordi, Kazi Md and Laoui, Tahar and Haseeb, A.S. Md. Abdul and Celis, Jean Pierre and Froyen, Ludo (2003) Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: a comparative study. Journal of Materials Processing Technology, 142 (3). pp. 738-743. ISSN 0924-0136

Shuhaimi, N.E.A. and Majid, S.R. and Arof, Abdul Kariem (2009) Studies on the dielectric behavior in (tOO-x) wt, % methyl cellulose (MC) +x wt. % NH4N03 polymer electrolytes. In: National Workshop on Functional Materials 2009, 16 June 2009, Centre For Ionics, University of Malaya.

Shukri, Ahmad Azim and Shamsudin, Mohd Fazaulnizam and Ibrahim, Zainah and Alengaram, Ubagaram Johnson and Hashim, Huzaifa (2018) Simulating Intermediate Crack Debonding on RC Beams Strengthened with Hybrid Methods. Latin American Journal of Solids and Structures, 15 (9). e78. ISSN 1679-7817

Siddique, Istiaq Jamil and Bahar, Rubina and Ibrahim, Shaliza and Al Hazza, Muataz Hazza Faizi (2018) Performance of combined PTFE hydrophilic and hydrophobic membrane during laundry/detergent wastewater treatment by air gap membrane distillation (AGMD): an experimental study. Desalination and Water Treatment, 127. pp. 255-261. ISSN 1944-3994

Sim, L.C. and Leong, K.H. and Ibrahim, S. and Saravanan, P. (2014) Graphene oxide and Ag engulfed TiO2 nanotube arrays for enhanced electron mobility and visible-light-driven photocatalytic performance. Journal of Materials Chemistry A, 2 (15). pp. 5315-5322. ISSN 2050-7488

Sim, L.C. and Ng, K.W. and Ibrahim, S. and Saravanan, P. (2013) Preparation of improved p-n junction NiO/TiO2 nanotubes for solar-energy-driven light photocatalysis. International Journal of Photoenergy, 2013. ISSN 1110-662X

Sim, L.C. and Ng, K.W. and Ibrahim, S. and Saravanan, P. (2014) Synthesis, Features and Solar-Light-Driven Photocatalytic Activity of TiO2 Nanotube Arrays Loaded with SnO2. Journal of Nanoscience and Nanotechnology, 14 (9). pp. 7001-7009. ISSN 1533-4880

Sim, L.C. and Tan, W.H. and Leong, K.H. and Bashir, M.J.K. and Saravanan, P. and Surib, N.A. (2017) Mechanistic Characteristics of Surface Modified Organic Semiconductor g-C3N4 Nanotubes Alloyed with Titania. Materials, 10 (1). p. 28. ISSN 1996-1944

Simon, S. (2016) Concrete like a nation is ambitious. In: The Impossibility of Mapping (Urban Asia), 24 - 25 November 2016, Nanyang Technological University, Centre for Contemporary Art, Singapore.

Sing, W.L. and Hashim, Roslan and Ali, F. (2011) Effect of binder and silica sand on unconfined compressive strength of cemented peat. International Journal of Physical Sciences, 6 (13). pp. 3047-3053. ISSN 19921950

Sing, W.L. and Hashim, Roslan and Ali, F. (2008) Engineering behaviour of stabilized peat soil. European Journal of Scientific Research, 21 (4). pp. 581-591. ISSN 1450216X

Sing, W.L. and Hashim, Roslan and Ali, F.H. (2008) Compression rates of untreated and stabilized peat soils. Electronic Journal of Geotechnical Engineering, 13 F. ISSN 10893032

Sing, W.L. and Hashim, Roslan and Ali, F.H. (2009) Unconfined compressive strength of cemented peat. Australian Journal of Basic and Applied Sciences, 3 (4). pp. 3850-3856. ISSN 19918178

Sing, W.L. and Hashim, Roslan and Ali, F.H. (2009) A review on experimental investigations of peat stabilization. Australian Journal of Basic and Applied Sciences, 3 (4). pp. 3537-3552. ISSN 19918178

Solangi, K.H. and Islam, M.R. and Saidur, R. and Rahim, N.A. and Fayaz, H. (2011) A review on global solar energy policy. Renewable and Sustainable Energy Reviews, 15 (4). pp. 2149-2163. ISSN 1364-0321

Solangi, K.H. and Lwin, T.N.W. and Rahim, N.A. and Hossain, M.S. and Saidur, R. and Fayaz, H. (2011) Development of solar energy and present policies in Malaysia. In: 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011, 2011, Kuala Lumpur.

Solaymani, S. and Kardooni, R. and Yusoff, S. and Kari, F. (2015) The impacts of climate change policies on the transportation sector. Energy, 81. pp. 719-728. ISSN 0360-5442

Soltani, M. and Moghaddam, T.B. and Karim, M.R. and Sulong, N.H. (2013) Analysis of developed transition road safety barrier systems. Accident Analysis and Prevention, 59. pp. 240-252. ISSN 0001-4575

Soltani, M. and Moghaddam, T.B. and Karim, M.R. and Sulong, N.H.R. (2013) The safety performance of guardrail systems: review and analysis of crash tests data. International Journal of Crashworthiness, 18 (5). pp. 530-543. ISSN 1358-8265

Soltanian, M.R.K. and Amiri, I.S. and Chong, W.Y. and Alavi, S.E. and Ahmad, Harith (2015) Stable Dual-Wavelength Coherent Source With Tunable Wavelength Spacing Generated By Spectral Slicing a Mode-Locked Laser Using Microring Resonator. IEEE Photonics Journal, 7 (6). ISSN 1943-0655

Soltanian, Mohammad Reza K. and Amiri, Iraj Sadegh and Alavi, S. Ehsan and Ahmad, Harith (2015) Dual-Wavelength Erbium-Doped Fiber Laser to Generate Terahertz Radiation Using Photonic Crystal Fiber. Journal of Lightwave Technology (JLT), 33 (24). pp. 5038-5046. ISSN 0733-8724

Soo, Joshua Zheyan and Ang, Bee Chin and Ong, Boon Hoong (2018) Influence of calcination on the morphology and crystallinity of titanium dioxide nanofibers towards enhancing photocatalytic dye degradation. Materials Research Express, 6 (2). 025039. ISSN 2053-1591

Soon, C. and Wei, H.L. (2012) A study of ship's propeller jet induced scour. In: 2nd Conference for Regional Cooperation in Ocean and Earth Science Research in the South China Sea, 21-24 October 2012, University of Malaya, Kuala Lumpur, Malaysia.

Sreedharan, G. and Moghavvemi, M. (2007) Real time security assessment in national load despatch centre, Tenaga Nasional Berhad, Malaysia. In: 3rd IASTED Asian Conference on Power and Energy Systems, AsiaPES 2007, 2 - 4 April 2007, Phuket, Thailand.

Subramaniam, P. and Khan, N.A. and Ibrahim, S. (2006) The Effects of Various Parameters on Cr (VI) Adsorption by Raw Rice Husk. Malaysian Journal of Science, 25 (1). pp. 23-29. ISSN 2600-8688

Sulaiman, A. and Harun, Sulaiman Wadi and Ahmad, F. and Arof, Hamzah and Ahmad, Harith (2012) Dual-wavelength laser generation using highly concentrated erbium-doped fibre coupling with microfibre knot resonator. Electronics Letters, 48 (5). ISSN 0013-5194

Sulaiman, A. and Harun, Sulaiman Wadi and Arof, Hamzah and Ahmad, Harith (2012) Compact and tunable Erbium-Doped fiber laser with microfiber Mach–Zehnder interferometer. IEEE Journal of Quantum Electronics, 48 (9). ISSN 0018-9197

Sulaiman, N.M.N. and Ibrahim, S. and Abdullah, S.L. (2010) Membrane Bioreactor for the treatment of natural rubber wastewater. International Journal of Environmental Engineering, 2 (1-3). pp. 92-109. ISSN 1756-8463

Sulaiman, S. and Abdul Aziz, A.R. and Aroua, Mohamed Kheireddine (2013) Reactive extraction of solid coconut waste to produce biodiesel. Journal of the Taiwan Institute of Chemical Engineers, 44 (2). pp. 233-238. ISSN 1876-1070

Sulaiman, S. and Abdul Raman, A.A. and Aroua, M.K. (2010) Coconut waste as a source for biodiesel production. In: 2nd International Conference on Chemical, Biological and Environmental Engineering, ICBEE 2010, 2010, Cairo.

Sulaiman, S. and Aziz, A.R.A. and Aroua, Mohamed Kheireddine (2013) Optimization and modeling of extraction of solid coconut waste oil. Journal of Food Engineering, 114 (2). pp. 228-234. ISSN 0260-8774

Sulaiman, S.S. and Annuar, M.S.M. and Abdul Razak, N.N. and Ibrahim, S. and Bakar, B. (2013) Triarylmethane dye decolorization by pellets of pycnoporus sanguineus: statistical optimization and effects of novel impeller geometry. Bioremediation Journal, 17 (4). pp. 305-315. ISSN shaliza@um.edu.my

Sumesh, M. and Alengaram, U.J. and Jumaat, M.Z. and Mo, K.H. and Alnahhal, M.F. (2017) Incorporation of nano-materials in cement composite and geopolymer based paste and mortar – A review. Construction and Building Materials, 148. pp. 62-84. ISSN 0950-0618

Sutharsini, U. and Ramesh, S. and Wong, Y.H. and Misran, H. and Yusuf, F. and Tan, C.Y. and Purbolaksono, J. and Teng, W.D. (2014) Effect of sintering holding time on low-temperature degradation of yttria stabilised zirconia ceramics. Materials Research Innovations, 18 (S6). S6-408-S6-411. ISSN 1432-8917

Syed Yahya, S.N.N. and Mohd Ariffin, A.R. and Ismail, M.A. (2015) Energy consumption vs. users' perceptions: A quantitative study of energy and comfort in university campus. In: Passive Low Energy Architecture (PLEA) 2015: Architure in revolution, 09-11 September 2015, Bologna.Italy.

Syukri, M. and Bakar, A.A.H.A. and Mokhlis, Hazlie and Arof, Hamzah and Illias, H.A. (2013) Wavelet-based and database approach for locating faulty section of high impedance fault in a distribution system. Przegląd Elektrotechniczny, 89. pp. 211-218. ISSN 0033-2097

T

Taha, Z. and Passarella, R. and Sugiyono, . and Rahim, N.A. and Sah, J.M. and Ahmad-Yazid, A. (2011) CFD Analysis for Merdeka 2 Solar Vehicle. Advanced Science Letters, 4 (8-10). pp. 2807-2811. ISSN 1936-6612

Taifunisyam, T. and Souad A., M. and Mohd Rafie, J. and Wan Jefrey, B. and Chin, K.M. and Chia, C.C. and Tan, J.H. (2014) Optical, thermal and dielectric studies of silver-silica nanoparticles synthesized via sol-gel technique. In: 28th Regional Conference on Solid State Science and Technology 2014 (RCSSST 2014)., 25 - 27 November 2014, Cameron Highland, Pahang, Malaysia..

Tajally, Mohammad and Huda, Zainul and Masjuki, Haji Hassan (2010) A comparative analysis of tensile and impact-toughness behavior of cold-worked and annealed 7075 aluminum alloy. International Journal of Impact Engineering, 37 (4). pp. 425-432. ISSN 0734-743X

Tajul Baharuddin, M.F. and Othman, A.R. and Taib, S. and Hashim, Roslan and Zainal Abidin, M.H. and Radzuan, M.A. (2012) Evaluating freshwater lens morphology affected by seawater intrusion using chemistry-resistivity integrated technique: a case study of two different land covers in Carey Island, Malaysia. Environmental Earth Sciences, 69. pp. 1-19. ISSN 1866-6280

Tajul Baharuddin, M.F. and Taib, S. and Hashim, Roslan and Abidin, M.H.Z. and Rahman, N.I. (2013) Assessment of seawater intrusion to the agricultural sustainability at the coastal area of Carey Island, Selangor, Malaysia. Arabian Journal of Geosciences, 6 (10). pp. 3909-3928. ISSN 18667511

Tajul Baharuddin, M.F. and Taib, S. and Hashim, Roslan and Zainal Abidin, M.H. and Ishak, M.F. (2011) Time-lapse resistivity investigation of salinity changes at an ex-promontory land: a case study of Carey Island, Selangor, Malaysia. Environmental Monitoring and Assessment, 180 (1-4). pp. 345-369. ISSN 01676369

Talbi, Billel and Krim, Fateh and Rekioua, Toufik and Mekhilef, Saad and Laib, Abdelbaset and Belaout, Abdesslam (2018) A high-performance control scheme for photovoltaic pumping system under sudden irradiance and load changes. Solar Energy, 159. pp. 353-368. ISSN 0038-092X

Talib, D.N.A. and Bakar, A.H.A. and Mokhlis, H. (2012) Parameters affecting lightning backflash over pattern at 132kV double circuit transmission lines. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Tam, J.H. and Ong, Z.C. and Ismail, Z. and Ang, B.C. and Khoo, S.Y. (2017) Identification of material properties of composite materials using nondestructive vibrational evaluation approaches: A review. Mechanics of Advanced Materials & Structures (Formerly Mechanics of Composite Materials & Structures), 24 (12). pp. 971-986. ISSN 1537-6494

Tam, Jun Hui and Ong, Zhi Chao and Ismail, Zubaidah and Ang, Bee Chin and Khoo, Shin Yee (2018) Inverse Identification of Composite Material Properties by using a Two-Stage Fourier Method. Experimental Mechanics, 58 (6). pp. 963-981. ISSN 0014-4851

Tam, Jun Hui and Ong, Zhi Chao and Ismail, Zubaidah and Ang, Bee Chin and Khoo, Shin Yee and Li, Wen L. (2018) Inverse identification of elastic properties of composite materials using hybrid GA-ACO-PSO algorithm. Inverse Problems in Science and Engineering, 26 (10). pp. 1432-1463. ISSN 1741-5977

Tamin, N.M. and Zakaria, R. and Hashim, Roslan and Yin, Y. (2011) Establishment of Avicennia marina mangroves on accreting coastline at Sungai Haji Dorani, Selangor, Malaysia. Estuarine, Coastal and Shelf Science, 94 (4). pp. 334-342. ISSN 02727714

Tan, A.W. and Pingguan-Murphy, B. and Ahmad, R. and Akbar, S. (2013) Synthesis of bioactive titaniananofibrous structures via oxidation. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Tan, B.H. and Moghavvemi, M. (2000) Real time analysis of fetal phonocardiography. In: 2000 TENCON Proceedings, 24 - 27 September 2000, Kuala Lumpur, Malaysia.

Tan, H.W. and Abdul Aziz, A.R. and Aroua, M.K. (2013) Glycerol production and its applications as a raw material: a review. Renewable and Sustainable Energy Reviews. pp. 118-127. ISSN 1364-0321

Tan, K.H. and Lai, S.H. and Ibrahim, S. and Sulaiman, N.M.N. and Sharifi, M. and Abe, S. (2014) Impact of Fine Sediment on TSS and Turbidity in Retention Structure. Journal of Geoscience and Environment Protection, 2 (4). pp. 1-8. ISSN 2327-4336

Tan, K.T. and Abdul Razak, H. (2011) Assessment of risk to school buildings resulting from distant earthquakes. In: 12th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC12, 2011, Hong Kong.

Tan, Kok Tong and Suhatril, Meldi and Razak, Hashim Abdul and Lu, Dagang (2018) Seismic Vulnerability of Low- and Mid-Rise Reinforced Concrete Buildings in Malaysia Designed by Considering Only Gravity Loads. Arabian Journal for Science and Engineering, 43 (4). pp. 1641-1654. ISSN 1319-8025

Tan, L.K. and Liew , Y.M. and Lim, E. (2016) Cardiac left ventricle segmentation using convolutional neural network regression / Li Kuo Tan, Yih Miin Liew and Einly Lim. In: IEEE-EMBS Conference on Biomedical Engineering and Science (IECBES), 4 - 6 December 2016, Pullman Hotel, Bangsar, Kuala Lumpur.

Tan, S.J. and Harun, Sulaiman Wadi and Shahabuddin, N.S. and Arof, Hamzah and Ahmad, Harith (2012) Dual-cavity dual-output multi-wavelength fiber laser based on nonlinear polarization rotation effect. Laser Physics, 22 (10). pp. 1601-1605. ISSN 1054-660X

Tan, S.J. and Ismail, M.A. and Shahabuddin, N.S. and Ahmad, Harith and Arof, Hamzah and Harun, Sulaiman Wadi (2012) Effect of doped fiber length on the stretch pulses of a mode-locked erbium-doped fiber laser. Laser Physics, 22 (7). pp. 1240-1243. ISSN 1054-660X

Tan, Tong Ling and Lai, Chin Wei and Hong, Sok Lai and Rashid, Suraya Abdul (2018) New insights into the photocatalytic endocrine disruptors dimethyl phathalate esters degradation by UV/MWCNTs-TiO2 nanocomposites. Journal of Photochemistry and Photobiology A: Chemistry, 364. pp. 177-189. ISSN 1010-6030

Tan, Y.Q. and Ibrahim, F. and Moghavvemi, M. (2007) Two electrodes low voltage input EEG amplifier for brain-computer-interface. In: 2007 International Conference on Intelligent and Advanced Systems, ICIAS 2007, 25 - 28 November 2007, Kuala Lumpur, Malaysia.

Tan, Y.Q. and Ibrahim, F. and Moghavvemi, M. (2007) Two electrodes low voltage input EEG amplifier for brain-computer-interface. In: 2007 International Conference on Intelligent and Advanced Systems, ICIAS 2007, 2007, Kuala Lumpur.

Tan, Z.X. and Thambiratnam, D.P. and Chan, T.H.T. and Razak, H.A. (2017) Detecting damage in steel beams using modal strain energy based damage index and Artificial Neural Network. Engineering Failure Analysis, 79. pp. 253-262. ISSN 1350-6307

Tarek, M. and Mekhilef, S. and Rahim, N.A. (2007) Application of adaptive notch filter for harmonics currents estimation. In: 8th International Power Engineering Conference, IPEC 2007, Singapore.

Tattersall, Wade J. and Chiari, Luca and Machacek, J.R. and Anderson, Emma and White, Ron D. and Brunger, M.J. and Buckman, Stephen J. and Garcia, Gustavo and Blanco, Francisco and Sullivan, James P. (2014) Positron interactions with water–total elastic, total inelastic, and elastic differential cross section measurements. The Journal of Chemical Physics, 140 (4). 044320. ISSN 0021-9606

Tattersall, Wade J. and Cocks, Daniel G. and Boyle, Gregory J. and Buckman, Stephen J. and White, R.D. (2015) Monte Carlo study of coherent scattering effects of low-energy charged particle transport in Percus-Yevick liquids. Physical Review E (PRE), 91 (4). 042201. ISSN 1539-3755

Taufiq, B.N. and Masjuki, Haji Hassan and Mahlia, T.M.I. and Amalina, M.A. and Faizul, M.S. and Saidur, Rahman (2007) Exergy analysis of evaporative cooling for reducing energy use in a Malaysian building. Desalination, 209 (1-3). pp. 238-243. ISSN 0011-9164

Taufiq, B.N. and Masjuki, Haji Hassan and Mahlia, T.M.I. and Saidur, Rahman and Faizul, M.S. and Niza Mohamad, E. (2007) Second law analysis for optimal thermal design of radial fin geometry by convection. Applied Thermal Engineering, 27 (8-9). pp. 1363-1370. ISSN 1359-4311

Tay, S.L. and Haseeb, A.S. Md. Abdul and Johan, M.R. and Munroe, P.R. and Quadir, M.Z. (2013) Influence of Ni nanoparticle on the morphology and growth of interfacial intermetallic compounds between Sn–3.8Ag–0.7Cu lead-free solder and copper substrate. Intermetallics, 33. pp. 8-15. ISSN 0966-9795

Tay, S.L. and Wang, Y. and Wei, X. and Gao, W. (2015) Effects of bismuth addition and electrodeposition processing on Zn-based coatings. International Journal of Modern Physics B (ijmpb), 29 (10n11). p. 1540010. ISSN 0217-9792

Tee, Yun Lu and Loo, Mei Sze and Andriyana, Andri (2018) Recent advances on fatigue of rubber after the literature survey by Mars and Fatemi in 2002 and 2004. International Journal of Fatigue, 110. pp. 115-129. ISSN 0142-1123

Teh, C.Y. and Wu, T.Y. and Juan, J.C. (2015) Facile sonochemical synthesis of N,Cl-codoped TiO2: Synthesis effects, mechanism and photocatalytic performance. Catalysis Today, 256. pp. 365-374. ISSN 0920-5861

Teh, L.K. and Ismail, R. and Yusoff, R. and Hussein, A. and Isa, M.N. and Rahman, A.R.A. (2001) Heterogeneity of the CYP2D6 gene among Malays in Malaysia. Journal of Clinical Pharmacy and Therapeutics, 26 (3). pp. 205-211. ISSN 0269-4727

Teh, P.L. and Yong, C.C. and Arumugam, V. (2009) A paradigm for developing tqm-role stressors model and index. In: IEEE International Conference on Industrial Engineering and Engineering Management, 8-11 Dec 2009, Hong Kong.

Teh, S.J. and Hamid, Sharifah Bee Abd and Lai, C.W. and Lim, Y.S. (2015) ZnCl2/NaCl-Catalysed Hydrothermal Carbonization of Glucose and Oil Palm Shell Fiber. Nanoscience and Nanotechnology Letters, 7 (7). pp. 611-615. ISSN 1941-4900

TermehYousefi, A. and Tateno, K. and Bagheri, S. and Tanaka, H. (2017) Development of Frequency Based Taste Receptors Using Bioinspired Glucose Nanobiosensor. Scientific Reports, 7 (1). pp. 1-9. ISSN 2045-2322

Tham, H.J. and Hussain, M.A. and Ramachandran, K.B. (2000) Variable structure control for a continuous bioreactor. In: 2000 TENCON Proceedings, 2000, Kuala Lumpur, Malaysia.

Tham, H.J. and Ramachandran, K.B. and Hussain, M.A. (2003) Sliding mode control for a continuous bioreactor. Chemical and Biochemical Engineering Quarterly, 17 (4). pp. 267-275. ISSN 0352-9568

Tham, L.K. and Abu Osman, Noor Azuan and Lim, K.S. and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar (2011) Quantification of patellar tendon reflex by motion analysis. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Tham, L.K. and Abu Osman, Noor Azuan and Lim, K.S. and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar and Zain, N.M. (2011) Investigation to predict patellar tendon reflex using motion analysis technique. Medical Engineering & Physics, 33 (4). pp. 407-410. ISSN 1350-4533

Tham, L.K. and Abu Osman, Noor Azuan and Lim, K.S. and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar and Zain, N.M. (2011) Investigation to predict patellar tendon reflex using motion analysis technique. Medical Engineering & Physics, 33 (4). pp. 407-410. ISSN 1350-4533

Tham, L.K. and Abu Osman, Noor Azuan and Wan Abas, W.A.B. and Lim, K.S. (2013) The validity and reliability of motion analysis in patellar tendon reflex assessment. PLoS ONE, 8 (2). e55702. ISSN 1932-6203

Tharsika, T. and Haseeb, A.S. Md. Abdul and Akbar, S.A. and Sabri, M.F.M. (2014) Catalyst free single-step fabrication of SnO2/ZnO core–shell nanostructures. Ceramics International, 40 (5). pp. 7601-7605. ISSN 0272-8842

Tharsika, T. and Haseeb, A.S. Md. Abdul and Akbar, S.A. and Sabri, M.F.M. and Wong, Y.H. (2014) Enhanced Ethanol Gas Sensing Properties of SnO2-Core/ZnO-Shell Nanostructures. Sensors, 14 (8). pp. 14586-14600. ISSN 1424-8220

Tharsika, T. and Haseeb, A.S. Md. Abdul and Akbar, S.A. and Sabri, M.F.M. and Wong, Y.H. (2015) Gas sensing properties of zinc stannate (Zn2SnO4) nanowires prepared by carbon assisted thermal evaporation process. Journal of Alloys and Compounds, 618. pp. 455-462. ISSN 0925-8388

Tharsika , T. and Haseeb, A.S. Md. Abdul and Mohd Faizul, M.S. (2013) Fabrication and characterization of ZnO-Sn02 mixed nanostructures. In: 1st International Conference on the Science & Engineering of Materials, 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Thiha, A. and Ibrahim, Fatimah and Muniandy, S. and Dishaw, I.J. and Teh, S.J. and Thong, Kwai Lin and Leo, B.F. and Madou, M. (2018) All-carbon suspended nanowire sensors as a rapid highly-sensitive label-free chemiresistive biosensing platform. Biosensors and Bioelectronics, 107. pp. 145-152. ISSN 0956-5663

Thio, T. and Nozari, A.A. and Soin, N. and Kahar, M.K.B.A. and Md Dawal, Siti Zawiah and Samra, K.A. and Madou, M. and Ibrahim, F. (2011) Hybrid capillary-flap valve for vapor control in point-of-care microfluidic CD. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Thio, T.H.G. and Ibrahim, F. and Al-Faqheri, W. and Moebius, J. and Khalid, N.S. and Soin, N. and Kahar, M.K.B.A. and Madou, M. (2013) Push pull microfluidics on a multi-level 3D CD. Lab on a Chip - Miniaturisation for Chemistry and Biology, 13 (16). pp. 3199-3209. ISSN 1473-0189

Thio, T.H.G. and Ibrahim, F. and Al-Faqheri, W. and Soin, N. and Abdul Kahar, M.K.B. and Madou, M. (2013) Multi-level 3D implementation of thermo-pneumatic pumping on centrifugal microfluidic CD platforms. In: 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2013, 2013, Osaka.

Thio, T.H.G. and Soroori, S. and Ibrahim, F. and Al-Faqheri, W. and Soin, N. and Kulinsky, L. and Madou, M. (2013) Theoretical development and critical analysis of burst frequency equations for passive valves on centrifugal microfluidic platforms. Medical and Biological Engineering and Computing, 51 (5). pp. 525-535. ISSN 0140-0118

Thirugnanasambandam, M. and Hasanuzzaman, M. and Saidur, R. and Ali, M.B. and Rajakarunakaran, S. and Devaraj, D. and Rahim, N.A. (2011) Analysis of electrical motors load factors and energy savings in an Indian cement industry. Energy, 36 (7). pp. 4307-4314. ISSN 0360-5442

Thitiyasook, P. and Kittisupakorn, P. and Hussain, M.A. (2007) Dual-mode control with neural network based inverse model for a steel pickling process. Asia-Pacific Journal of Chemical Engineering, 2 (6). pp. 536-543. ISSN 19322135

Thulasimani, C. and Ramesh, S. and Ramesh, K. and Salmah, H. (2015) Fabrication and characterization of natural rubber/Imperata cylindricacellulose fiber biocomposites. Asia-Pacific Journal of Chemical Engineering, 10 (5). pp. 716-723. ISSN 1932-2135

Tiu, Zian Cheak and Suthaskumar, M. and Zarei, A. and Tan, S.J. and Ahmad, Harith and Harun, Sulaiman Wadi (2015) Generation of switchable domain wall and Cubic–Quintic nonlinear Schrödinger equation dark pulse. Optics & Laser Technology, 73. pp. 127-129. ISSN 0030-3992

Toghroli, Ali and Suhatril, Meldi and Ibrahim, Zainah and Safa, Maryam and Shariati, Mahdi and Shamshirband, Shahaboddin (2018) Potential of soft computing approach for evaluating the factors affecting the capacity of steel–concrete composite beam. Journal of Intelligent Manufacturing, 29 (8). pp. 1793-1801. ISSN 0956-5515

Tonekabonimoghadam, S. and Akikur, R.K. and Hussain, M.A. and Hajimolana, S. and Saidur, R. and Ping, H.W. and Chakrabarti, M.H. and Brandon, N.P. and Aravind, P.V. and Nayagar, J.N.S. and Hashim, M.A. (2015) Mathematical modelling and experimental validation of an anode-supported tubular solid oxide fuel cell for heat and power generation. Energy, 90. pp. 1759-1768. ISSN 0360-5442

Touri, Maria and Moztarzadeh, Fathollah and Osman, Noor Azuan Abu and Dehghan, Mohammad Mehdi and Mozafari, Masoud (2019) Optimisation and biological activities of bioceramic robocast scaffolds provided with an oxygen-releasing coating for bone tissue engineering applications. Ceramics International, 45 (1). pp. 805-816. ISSN 0272-8842

Tousizadeh, Mahdi and Che, Hang Seng and Selvaraj, Jeyraj and Rahim, Nasrudin Abd and Ooi, Boon Teck (2019) Performance Comparison of Fault-Tolerant Three-Phase Induction Motor Drives Considering Current and Voltage Limits. IEEE Transactions on Industrial Electronics, 66 (4). pp. 2639-2648. ISSN 0278-0046

Tsai, H.W. and Yaghoubi, A. and Chan, T.C. and Wang, C.C. and Liu, W.T. and Liao, C.N. and Lu, S.Y. and Chen, L.J. and Chueh, Y.L. (2015) Electrochemical synthesis of ultrafast and gram-scale surfactant-free tellurium nanowires by gas–solid transformation and their applications as supercapacitor electrodes for p-doping of graphene transistors. Nanoscale, 7 (17). pp. 7535-7539. ISSN 2040-3364

Tsukiyama, D. and Fukuda, Y. and Miyake, S. and Mekhilef, S. and Kwon, S. K. and Nakaoka, M. (2011) A new 98 soft-switching full-bridge DC-DC converter based on secondary-side LC resonant principle for PV generation systems. In: 2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011, Singapore.

Tuan, Z. and Farazila, Y. and Mohd, H. and Tadashi, A. (2013) Brazing of inconel 600 by active filler metal. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

U

Ubenthiran, S. and Ramesh, S. and Purbolaksono, J. and Tan, C.Y. and Teng, W.D. and Amiriyan, M. (2013) Low temperature degradation and defect relationship in YSZ ceramic. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Uddin, M.A. and Jameel, M. and Razak, H.A. and Saiful Islam, A.B.M. (2012) Response prediction of offshore floating structure using artificial neural network. Advanced Science Letters, 14 (1). pp. 186-189. ISSN 19367317

Uddin, Md and Jameel, Mohammed and Sobuz, Habibur Rahman and Hasan, Noor Md and Islam, Md and Amanat, Khan Mahmud (2012) The effect of curing time on compressive strength of composite cement concrete. Applied Mechanics and Materials, 204. pp. 4105-4109. ISSN 3037854847

Ul Islam, M.M. and Mo, K.H. and Alengaram, U.J. and Jumaat, M.Z. (2016) Durability properties of sustainable concrete containing high volume palm oil waste materials. Journal of Cleaner Production, 137. pp. 167-177. ISSN 0959-6526

Ullah, M.H. and Uddin, M.J. and Latef, T.A. and Mahadi, W.N.L. and Ahsan, M.R. and Islam, M.T. (2015) Constitutive parameter analysis of left-handed dual-star split-ring resonator metamaterial for homogeneous infinite slab. IET Microwaves Antennas & Propagation, 9 (15). pp. 1740-1746. ISSN 1751-8725

Uning, R. and Abu Osman, Noor Azuan and Usman, J. and Wan Abas, Wan Abu Bakar (2007) Fractal characterization of gait in parkinson's disease using detrended fluctuation analysis. Journal of Biomechanics, 40 (2). p. 82. ISSN 0021-9290

Ur Rehman, Sardar Kashif and Ibrahim, Zainah and Memon, Shazim and Aunkor, Md Toasin Hossain and Faisal Javed, Muhammad and Mehmood, Kashif and Shah, Syed (2018) Influence of Graphene Nanosheets on Rheology, Microstructure, Strength Development and Self-Sensing Properties of Cement Based Composites. Sustainability, 10 (3). p. 822. ISSN 2071-1050

Usman, J. and McIntosh, A.S. (2012) Upper limb injury in rugby union football: results of a cohort study. British Journal of Sports Medicine. ISSN 1473-0480 (Electronic) 0306-3674 (Linking)

Usman, J. and McIntosh, A.S. and Fréchède, B. (2011) An investigation of shoulder forces in active shoulder tackles in rugby union football. Journal of Science and Medicine in Sport, 14 (6). pp. 547-552. ISSN 1440-2440

Usman, J. and McIntosh, A.S. and Quarrie, K. and Targett, S. (2015) Shoulder injuries in elite rugby union football matches: Epidemiology and mechanisms. Journal of Science and Medicine in Sport, 18 (5). pp. 529-533. ISSN 1440-2440

Ustun, T.S. and Mekhilef, S. (2010) Design and implementation of static synchronous series compensator with a soft-switching H-bridge inverter with DSP-based synchronization control. International Review of Electrical Engineering-Iree, 5 (4). pp. 1347-1353. ISSN 1827-6660

Ustun, T.S. and Mekhilef, S. (2010) Effects of a static synchronous series compensator (SSSC) based on a soft switching 48-pulse PWM inverter on the power demand from the grid. Journal of Power Electronics, 10 (1). pp. 85-90. ISSN 15982092

Ustun, T.S. and Mekhilef, S. (2009) Power line compensation study of a static synchronous series compensator (SSSC) based on soft switching 48-pulse PWM inverter. Australian Journal of Basic and Applied Sciences, 3 (2). pp. 1301-1314. ISSN 19918178

Ustun, T.S. and Mekhilef, S. (2008) A quasi-resonant soft switching 48-pulse PWM inverter with closed loop current control for the realization of FACTS devices. In: 2008 Australasian Universities Power Engineering Conference, AUPEC 2008, Sydney, NSW.

Ustun, T.S. and Mekhilef, S. (2009) A quasi-resonant soft switching 48-pulse PWM inverter with closed loop current control for the realization of Static Synchronous Series Compensator (SSSC). Australian Journal of Basic and Applied Sciences, 3 (3). pp. 1814-1826. ISSN 19918178

V

Vafaeifard, M. and Lee, G. and Akib, S. and Ibrahim, S. and Yoon, Y. and Jang, M. (2016) Facile and economic one-pot synthesis of rigid functional-polyurethane for the effective treatment of heavy metal-contaminated urban storm water run-off. Desalination and Water Treatment, 57 (54). pp. 26114-26129. ISSN 1944-3994

Vaneghi, F.M. and Oladazimi, M. and Shiman, F. and Kordi, A. and Safari, M.J. and Ibrahim, F. (2012) A comparative approach to ECG feature extraction methods. In: 3rd International Conference on Intelligent Systems Modelling and Simulation, ISMS 2012, 2012, Kota Kinabalu.

Varman, M. and Ahmed, A. and Masjuki, Haji Hassan and Abul Kalam, M. and Zulkifli, N.W.M. (2017) Evaluation of tribological performance of hydrogenated DLC by surface texturing in the presence of palm BASED TMP ester at different temperatures. In: 14th International Conference (AEIC) on Engineering, Architecture & Technology 2017, 12-14 December 2017, Cairo, Egypt.

Vengadaesvaran, B. and Arun, N. and Chanthiriga, R. and Bushroa, A.R. and Rau, S.R. and Ramesh, K. and Al-Shabeeb, G.H.E. and Ramesh, S. and Arof, Abdul Kariem (2014) Effect of Silver Nanoparticles on the Mechanical and Physical Properties of Epoxy Based Silane Coupling Agent. Journal of Nano Research, 26. pp. 153-158. ISSN 1662-5250

Vengadaesvaran, B. and Arun, N. and Chanthiriga, R. and Bushroa, A.R. and Rau, S.R. and Ramesh, K. and Vikneswaran, R. and Al-Shabeeb, G.H.E. and Ramesh, S. and Arof, Abdul Kariem (2014) Scratch resistance enhancement of 3-glycidyloxypropyltrimethoxysilane coating incorporated with silver nanoparticles. Surface Engineering, 30 (3). pp. 177-182. ISSN 0267-0844

Veny, H. and Aroua, M.K. and Sulaiman, N.M.N. (2010) Solvent free enzymatic transesterification of crude jatropha oil in packed bed reactor. In: 2nd International Conference on Chemical, Biological and Environmental Engineering, ICBEE 2010, 2010, Cairo.

Veny, H. and Baroutian, S. and Aroua, M.K. and Hasan, M. and Abdul Raman, A.A. and Sulaiman, N.M.N. (2009) Density of jatropha curcas seed oil and its methyl esters: measurement and estimations. International Journal of Thermophysics, 30 (2). pp. 529-541. ISSN 0195-928X

Vidya, K.S. and Ng, E.Y.K. and Acharya, U.R. and Chou, S.M. and Tan, R.S. and Ghista, D.N. (2015) Computer-aided diagnosis of Myocardial Infarction using ultrasound images with DWT, GLCM and HOS methods: A comparative study. Computers in Biology and Medicine, 62. pp. 86-93. ISSN 0010-4825

W

Wagiman, Abdullah and Wahab, Mohd Saidin and Mohid, Zazuli and Mamat, Azuddin (2014) Effect of GMAW-CMT Heat Input on Weld Bead Profile Geometry for Freeform Fabrication of Aluminium Parts. Applied Mechanics and Materials, 465. pp. 1370-1374. ISSN 1660-9336

Wahab, A.K.A. and Hussain, M.A. and Omer, R. (2007) Temperature control of a pilot plant reactor system using a genetic algorithm model-based control approach. Asia-Pacific Journal of Chemical Engineering, 2 (6). pp. 526-535. ISSN 1932-2143

Wahab, A.K.A. and Hussain, M.A. and Sulaiman, M.Z. (2000) Temperature control for chemical reactor using adaptive neural network control strategy. In: TENCON 2000. Proceedings, 25-25 September 2000, Kuala Lumpur.

Wahab, A.K.A. and Hussain, Mohd Azlan and Sulaiman, Mohd Zaki (2000) Temperature control for chemical reactor using adaptive neural network control strategy. In: 2000 TENCON Proceedings, 2000, Kuala Lumpur, Malaysia.

Waheed, M. and Kaur, K. and Ain, N. and Sanni, S.A. (2015) Emotional attachment and multidimensional self-efficacy: extension of innovation diffusion theory in the context of eBook reader. Behaviour & Information Technology, 34 (12, SI). pp. 1147-1159. ISSN 0144-929X

Wan, K. and Aziz, A.A. and Ab, Shahriman and Zaaba, Siti Khadijah and Ibrahim, Zuwairie and Yusof, Zulkifli Md. and Ibrahim, Ismail and Mukred, Jameel Abdulla Ahmed and Mokhtar, Norrima (2012) Probability distribution of arm trajectory for motion estimation and gesture recognition. Advanced Science Letters, 13 (1). pp. 534-539. ISSN 19366612

Wan Abas, W.A.B. (1995) Stress stabilization behaviors in skin under small tensile loads in-Vitro. Bio-Medical Materials and Engineering, 5 (2). pp. 59-63. ISSN 0959-2989

Wan Abas, W.A.B. and Barbenel, J.C. (1982) Uniaxial tension test of human-skin invivo. Journal of Biomedical Engineering, 4 (1). pp. 65-71. ISSN 0141-5425

Wan Ghazali, Wan Nor Maawa and Mamat, Rizalman and Masjuki, Haji Hassan and Najafi, Gholamhassan (2015) Effects of biodiesel from different feedstocks on engine performance and emissions: A review. Renewable and Sustainable Energy Reviews, 51. pp. 585-602. ISSN 1364-0321

Wan Mohtar, Wan Hanna Melini and Afan, Haitham and El-Shafie, Ahmed and Bong, Charles Hin Joo and Ab. Ghani, Aminuddin (2018) Influence of bed deposit in the prediction of incipient sediment motion in sewers using artificial neural networks. Urban Water Journal, 15 (4). pp. 296-302. ISSN 1573-062X

Wang, C. and Abdul-Rahman, H. and Chow, P.S. (2016) Development and test run of civil engineering schedule acceleration model through ant colony optimization. Journal of Civil Engineering and Management, 22 (8). pp. 1009-1020. ISSN 1392-3730

Wang, C. and Abdul-Rahman, H. and Rao, S.P. (2010) Development and testing of a fluorescent fiber solar concentrator for remote daylighting. Journal of Energy Engineering-ASCE, 136 (3). pp. 76-86.

Wang, C. and Abdul-Rahman, H. and Wang, H. (2010) Delivering the Beijing national aquatics center. Proceedings of The Institution of Civil Engineers-Civil Engineering , 163 (4). pp. 170-177.

Wang, Chen and Alashwal, Ali Mohammed and Asef, Arash and Abdul-Rahman, Hamzah and Wood, Lincoln Christopher (2018) Moderating role of organisational learning and firm size on risk management maturity in construction firms. South African Journal of Business Management, 49 (1). a320. ISSN 2078-5585

Wang, Chin Tsan and Sangeetha, Thangavel and Yan, Wei Mon and Chong, Wen Tong and Saw, Lip Huat and Zhao, Feng and Chang, Chung Ta and Wang, Chen Hao (2019) Application of interface material and effects of oxygen gradient on the performance of single-chamber sediment microbial fuel cells (SSMFCs). Journal of Environmental Sciences, 75. pp. 163-168. ISSN 1001-0742

Wang, J.G. and Karim, M.R. and Lin, P.Z. (2007) Analysis of seabed instability using element free Galerkin method. Ocean Engineering, 34 (2). pp. 247-260. ISSN 0029-8018

Wardah, T. and Sharifah Nurul Huda, Y.S. and Suzana, R. and Hamzah, A. (2014) WRF model input for improved radar rainfall estimates using kalman filter. In: 2014 International Symposium on Technology Management and Emerging Technologies (ISTMET 2014), 27-29 May 2014, Bandung, Indonesia.

Wazed, M.A. and Ahmed, S. and Nukman, Y. (2010) A review of manufacturing resources planning models under different uncertainties: State-of-the-art and future directions. South African Journal of Industrial Engineering, 21 (1). pp. 17-33.

Wazed, M.A. and Ahmed, S. and Yusoff, N. (2009) Component commonality in multistage production system: Models with capacity constraints. In: 3rd International Engineering Convention 2009, 11-14 May 2009, Damascus, Syria..

Wee, L.L. and Annuar, M.S.B.M. and Ibrahim, Shaliza (2011) Short communication: energetics of glucoamylase-catalyzed hydrolysis of commercial sago starch. Asia Pacific Journal of Molecular Biology and Biotechnology, 19 (4). pp. 117-120. ISSN 0128-7451

Wee, L.L. and Annuar, M.S.M. and Ibrahim, Shaliza and Chisti, Y. (2011) Enzyme-mediated production of sugars from sago starch: statistical process optimization. Chemical Engineering Communications, 198 (11). pp. 1339-1353. ISSN 0098-6445

Wee, W.H. and Li, Z. and Hu, J. and Kadri, N.A. and Xu, F. and Liu, F. and Pingguan-Murphy, B. (2015) Fabrication of dielectrophoretic microfluidic chips using a facile screen-printing technique for microparticle trapping. Journal of Micromechanics and Microengineering, 25 (10). p. 105015. ISSN 0960-1317

Wei, N.C. and Hussain, M.A. and Wahab, A.K.A. (2007) Control of a batch polymerization system using hybrid neural network first principle model. Canadian Journal of Chemical Engineering, 85 (6). pp. 936-945. ISSN 0008-4034

Wei, X.J. and Yang, Z.D. and See, L.T. and Silva, F.V.M. and Wei, G. (2013) A novel polymer based antimicrobial coating with embedded copper or copper salt particles. In: 1st International conference on the Science & Engineering of Materials , Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Whaad, A.M. and Adam, N.M. and Sapuan, S.M. and Saidur, R. (2010) Effect of selected shading devices on office room temperature. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 236-243. ISSN 18230334

Wirba, A.V. and Abubakar Mas'ud, A. and Muhammad-Sukki, F. and Ahmad, S. and Mat Tahar, R. and Abdul Rahim, R. and Munir, A.B. and Karim, M.E. (2015) Renewable energy potentials in Cameroon: Prospects and challenges. Renewable Energy, 76. pp. 560-565. ISSN 0960-1481

Wong, H.S. and Razak, H.A. (2005) Efficiency of calcined kaolin and silica fume as cement replacement material for strength performance. Cement and Concrete Research, 35 (4). pp. 696-702. ISSN 0008-8846

Wong, K.T. and Eu, N.C. and Ibrahim, Shaliza and Kim, H. and Yoon, Y. and Jang, Min (2016) Recyclable magnetite-loaded palm shell-waste based activated carbon for the effective removal of methylene blue from aqueous solution. Journal of Cleaner Production, 115. pp. 337-342. ISSN 0959-6526

Wong, L.S. and Hashim, R. and Ali, F. (2013) Improved strength and reduced permeability of stabilized peat: focus on application of kaolin as a pozzolanic additive. Construction and Building Materials, 40.

Wong, L.S. and Hashim, Roslan and Ali, F. (2013) Improved strength and reduced permeability of stabilized peat: Focus on application of kaolin as a pozzolanic additive. Construction and Building Materials, 40. pp. 783-792. ISSN 09500618

Wong, L.S. and Hashim, Roslan and Ali, F. (2011) Unconfined compressive strength characteristics of stabilized peat. Scientific Research and Essays, 6 (9). pp. 1915-1921. ISSN 19922248

Wong, L.S. and Hashim, Roslan and Ali, F. (2013) Utilization of sodium bentonite to maximize the filler and pozzolanic effects of stabilized peat. Engineering Geology, 152. pp. 56-66. ISSN 00137952

Wong, L.S. and Hashim, Roslan and Ali, F.H. (2008) Strength and permeability of stabilized peat soil. Journal of Applied Sciences, 8 (21). pp. 3986-3990. ISSN 18125654

Wong, L.S. and Hashim, Roslan and Ali, F.H. (2009) A review on hydraulic conductivity and compressibility of peat. Journal of Applied Sciences, 9 (18). pp. 3207-3218. ISSN 18125654

Wong, S.D. and Ibrahim, S. and Zamzam, Z. and Kato, Y. and Sato, M. (2015) Effect of Impeller-To-Tank Geometry on Particles Distribution and Just-Suspension Speeds for a Range of Solids Loadings. Journal of Chemical Engineering of Japan, 48 (5). pp. 374-380. ISSN 0021-9592

Wong, S.P. and Gan, C.Y. and Lim, K.H. and Ting, K.N. and Low, Y.Y. and Kam, T.S. (2015) Arboridinine, a Pentacyclic Indole Alkaloid with a New Cage Carbon–Nitrogen Skeleton Derived from a Pericine Precursor. Organic Letters, 17 (14). pp. 3628-3631. ISSN 1523-7060

Wong, W.H. and Lee, W.X. and Ramanan, R.N. and Tee, L.H. and Kong, K.W. and Galanakis, C.M. and Sun, J. and Prasad, K.N. (2015) Two level half factorial design for the extraction of phenolics, flavonoids and antioxidants recovery from palm kernel by-product. Industrial Crops and Products, 63. pp. 238-248. ISSN 0926-6690

Wong, Y.H. and Atuchin, V.V. and Kruchinin, V.N. and Cheong, K.Y. (2014) Physical and dispersive optical characteristics of ZrON/Si thin-film system. Applied Physics A: Materials Science & Processing, 115 (3). pp. 1069-1072. ISSN 0947-8396

Wong, Y.H. and Cheong, K.Y. (2011) Band alignment and enhanced breakdown field of simultaneously oxidized and nitrided Zr film on Si. Nanoscale Research Letters, 6 (489). ISSN 1931-7573

Wong, Y.H. and Cheong, K.Y. (2013) Comparison of oxidized/nitrided Zr thin films on Si and SiC substrates. Ceramics International, 39 (Spp. 1). S475-S479. ISSN 0272-8842

Wong, Y.H. and Cheong, K.Y. (2012) Effects of oxidation and nitridation temperatures on electrical properties of sputtered Zr thin film based on Si in N2O ambient. Electronic Materials Letters, 8 (1). pp. 47-51. ISSN 1738-8090

Wong, Y.H. and Cheong, K.Y. (2011) Electrical Characteristics of Oxidized/Nitrided Zr Thin Film on Si. Journal of The Electrochemical Society (JES), 158 (12). H1270-H1278. ISSN 0013-4651

Wong, Y.H. and Cheong, K.Y. (2013) Electrical study of ZrO2/Si system formed at different oxidation/nitridation temperatures for extended duration in N2O ambient. Journal of Materials Research, 28 (21). pp. 2985-2989. ISSN 0884-2914

Wong, Y.H. and Cheong, K.Y. (2012) Formation of Zr- oxynitride thin films on 4H-SiC substrate. Thin Solid Films, 520 (22). pp. 6822-6829. ISSN 0040-6090

Wong, Y.H. and Cheong, K.Y. (2012) Metal-Oxide-Semiconductor Characteristics of Zr-Oxynitride Thin Film on 4H-SiC Substrate. Journal of The Electrochemical Society (JES), 159 (3). H293-H299. ISSN 0013-4651

Wong, Y.H. and Cheong, K.Y. (2012) Properties of thermally oxidized and nitrided Zr-oxynitride thin film on 4H–SiC in diluted N2O ambient. Materials Chemistry and Physics, 136 (2-3). pp. 624-637. ISSN 0254-0584

Wong, Y.H. and Cheong, K.Y. (2011) Thermal oxidation and nitridation of sputtered Zr thin film on Si via N2O gas. Journal of Alloys and Compounds, 509 (35). pp. 8728-8737. ISSN 0925-8388

Wong, Y.H. and Cheong, K.Y. (2010) ZrO2 thin films on Si substrate. Journal of Materials Science: Materials in Electronics, 21 (10). pp. 980-993. ISSN 0957-4522

Wong, Y.H. and Ramesh, S. and Tan, C.Y. and Projjal, B. (2014) Development of Sn–Cu–Sb alloys for making lead- and bismuth-free pewter. International Journal of Materials Research, 105 (2). pp. 183-187. ISSN 1862-5282

Wong, Yee Meng and Wu, Ta Yeong and Ling, Tau Chuan and Show, Pau Loke and Lee, Sze Ying and Chang, Jo-Shu and Ibrahim, Shaliza and Juan, Joon Ching (2018) Evaluating new bio-hydrogen producers: Clostridium perfringens strain JJC, Clostridium bifermentans strain WYM and Clostridium sp. strain Ade.TY. Journal of Bioscience and Bioengineering, 125 (5). pp. 590-598. ISSN 1389-1723

Wren, A.W. and Hassanzadeh, P. and Placek, L.M. and Keenan, T.J. and Coughlan, A. and Boutelle, L.R. and Towler, M.R. (2015) Silver Nanoparticle Coated Bioactive Glasses - Composites with Dex/CMC Hydrogels: Characterization, Solubility, and In Vitro Biological Studies. Macromolecular Bioscience, 15 (8). pp. 1146-1158. ISSN 1616-5187

X

Xu, X.Y. and Akay, A. and Wei, H.L. and Wang, S.Q. and Pingguan-Murphy, B. and Erlandsson, B.E. and Li, X.J. and Lee, W. and Hu, J. and Wang, L. and Xu, F. (2015) Advances in smartphone-based point-of-care diagnostics. Proceedings of the IEEE, 103 (2). pp. 236-247. ISSN 0018-9219

Y

Yafouz, B. and Kadri, N.A. and Ibrahim, F. (2012) The design and simulation of a planar microarray dot electrode for a dielectrophoretic lab-on-chip device. International Journal of Electrochemical Science, 7 (12). pp. 12054-12063. ISSN 1452-3981

Yafouz, B. and Kadri, N.A. and Ibrahim, F. (2012) A numerical analysis of electric field strength over planar microarray dot electrode for dielectrophoretic lab-on-chip device. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Yaghmaie, Mahkameh and Bahreininejad, Ardeshir (2011) A context-aware adaptive learning system using agents. Expert Systems with Applications, 38 (4). pp. 3280-3286. ISSN 0957-4174

Yahya, S. and Moghavvemi, M. and Almurib, H.A.F. (2012) Geometrically bounded singularities and joint limits prevention of a three dimensional planar redundant manipulator using artificial neural networks. In: 8th International Conference on Emerging Intelligent Computing Technology and Applications, ICIC 2012, 25-29 July 2012, Huangshan, China.

Yahya, S. and Moghavvemi, M. and Almurib, H.A.F. (2012) Joint torque reduction of a three dimensional redundant planar manipulator. Sensors (Switzerland), 12 (6). pp. 6869-6892. ISSN 14248220

Yahya, S. and Moghavvemi, M. and Mohamed, H.A.F. (2011) Geometrical approach of planar hyper-redundant manipulators: inverse kinematics, path planning and workspace. Simulation Modelling Practice and Theory, 19 (1). pp. 406-422. ISSN 1569190X

Yahya, S. and Moghavvemi, M. and Mohamed, H.A.F. (2012) Improvement of singularity avoidance for three dimensional planar manipulators by increasing their degrees of freedom. In: 2012 International Symposium on Computer, Consumer and Control, IS3C 2012, 4-6 June 2012, Taichung, Taiwan.

Yahya, S. and Moghavvemi, M. and Mohamed, H.A.F. (2012) Manipulability constraint locus for a six degrees of freedom redundant planar manipulator. In: 2012 International Symposium on Computer, Consumer and Control, IS3C 2012, 4-6 June 2012, Taichung, Taiwan.

Yahya, S. and Moghavvemi, M. and Mohamed, H.A.F. (2011) Redundant manipulators kinematics inversion. Scientific Research and Essays, 6 (26). pp. 5462-5470. ISSN 19922248

Yahya, S. and Moghavvemi, M. and Mohamed, H.A.F. (2012) Singularity avoidance of a six degree of freedom three dimensional redundant planar manipulator. Computers and Mathematics with Applications, 64 (5). pp. 856-868. ISSN 08981221

Yahya, S. and Mohamed, H.A.F. and Moghavvemi, M. (2009) A geometrical motion planning approach for redundant planar manipulators. Australian Journal of Basic and Applied Sciences, 3 (4). pp. 3757-3770. ISSN 19918178

Yahya, S. and Mohamed, H.A.F. and Moghavvemi, M. and Yang, S.S. (2009) Inverse kinematics of an equal length links planar hyper redundant manipulator using neural networks. In: ICROS-SICE International Joint Conference 2009, ICCAS-SICE 2009, 18-21 August 2009, Fukuoka, Japan.

Yahya, S. and Mohamed, H.A.F. and Moghavvemi, M. and Yang, S.S. (2009) Motion planning of hyper redundant manipulators based on a new geometrical method. In: 2009 IEEE International Conference on Industrial Technology, ICIT 2009, 10-13 February 2009, Churchill, VIC, Australia.

Yahya, S. and Mohamed, H.A.F. and Moghavvemi, M. and Yang, S.S. (2008) A geometrical inverse kinematics method for hyper-redundant manipulators. In: 2008 10th International Conference on Control, Automation, Robotics and Vision, ICARCV 2008, 17 - 20 December 2008, Hanoi, Viet Nam..

Yahya, S. and Mohamed, H.A.F. and Moghavvemi, M. and Yang, S.S. (2009) A new geometrical inverse kinematics method for planar hyper redundant manipulators. In: Conference on Innovative Technologies in Intelligent Systems and Industrial Applications, 25-26 July 2009, Kuala Lumpur.

Yang, S.S. and Chen, J. and Mohamed, H.A.F. and Moghavvemi, M. (2008) Sensor fault tolerant controller for a double inverted pendulum system. In: 17th World Congress, International Federation of Automatic Control, IFAC, 6 - 11 July 2008, Seoul, South Korea.

Yang, S.S. and Mid, E.C. and Mohamed, H.A.F. and Moghavvemi, M. (2008) Practical sensor fault tolerant control system. In: SICE Annual Conference 2008 - International Conference on Instrumentation, Control and Information Technology, 20 - 22 August 2008, Tokyo, Japan.

Yang, S.S. and Mid, E.C. and Mohamed, H.A.F. and Moghavvemi, M. and Chen, J. (2008) Modified feedback configuration for sensor fault tolerant control. In: 2008 10th International Conference on Control, Automation, Robotics and Vision, ICARCV 2008 , 17 - 20 December 2008, Hanoi, Viet Nam.

Yang, S.S. and Moghavvemi, M. and Tolman, J.D. (2000) Modeling of robot inverse kinematics using two ANN paradigms. In: IEEE Region 10 Annual International Conference, Proceedings/TENCON, 24 September 2000 through 27 September 2000, Kuala Lumpur, Malaysia..

Yang, S.S. and Mohamed, H.A.F. and Moghavvemi, M. and Goh, Y.H. (2008) Leakage detection via model based method. In: 2008 IEEE International Conference on Robotics, Automation and Mechatronics, RAM 2008, 21- 24 September 2008, Chengdu, China.

Yang, S.S. and Mohamed, H.A.F. and Moghavvemi, M. and Ng, P.H. (2009) Real-time model based sensor fault tolerant control system on a chip. In: ICROS-SICE International Joint Conference 2009, ICCAS-SICE 2009, 18-21 August 2009, Fukuoka, Japan.

Yap, K.S. and Teo, L.P. and Sim, L.N. and Majid, S.R. and Arof, Abdul Kariem (2009) Characteristics of PMMA-grafted natural rubber doped with LiCF3S03. In: National Workshop on Functional Materials 2009, 16 June 2009, Centre for Ionics,University of Malaya.

Yap, P.S. and Ibrahim, S. and Ang, K.B. (2013) Treatment of rubber glove wastewater by ultrafiltration. Malaysian Journal of Science, 32 (1). pp. 61-65. ISSN 2600-8688

Yap, S.P. and Alengaram, U.J. and Jumaat, M.Z. and Khaw, K.R. (2016) Torsional and cracking characteristics of steel fiber-reinforced oil palm shell lightweight concrete. Journal of Composite Materials, 50 (1). pp. 115-128. ISSN 0021-9983

Yap, S.P. and Alengaram, U.J. and Mo, K.H. and Jumaat, M.Z. (2017) High strength oil palm shell concrete beams reinforced with steel fibres. Materiales de Construcción, 67 (328). p. 142. ISSN 0465-2746

Yap, S.P. and Khaw, K.R. and Alengaram, U.J. and Jumaat, M.Z. (2015) Effect of fibre aspect ratio on the torsional behaviour of steel fibre-reinforced normal weight concrete and lightweight concrete. Engineering Structures, 101. pp. 24-33. ISSN 0141-0296

Yap, S.S. and Nee, C.H. and Yap, S.L. and Tou, T.Y. (2015) Nanostructured Diamond-Like Carbon Films Grown by Off-Axis Pulsed Laser Deposition. Journal of Nanomaterials (JNM), 2015. pp. 1-6. ISSN 1687-4110

Yap, Soon Poh and Chen, Paul Zhao Chiat and Goh, Yingxin and Ibrahim, Hussein Adebayo and Mo, Kim Hung and Yuen, Choon Wah (2018) Characterization of pervious concrete with blended natural aggregate and recycled concrete aggregates. Journal of Cleaner Production, 181. pp. 155-165. ISSN 0959-6526

Yaseen, Z.M. and Ebtehaj, I. and Bonakdari, H. and Deo, R.C. and Danandeh Mehr, A. and Mohtar, W.H.M.W. and Diop, L. and El-Shafie, A. and Singh, V.P. (2017) Novel approach for streamflow forecasting using a hybrid ANFIS-FFA model. Journal of Hydrology, 554. pp. 263-276. ISSN 0022-1694

Yaseen, Z.M. and Jaafar, O. and Deo, R.C. and Kisi, O. and Adamowski, J. and Quilty, J. and El-Shafie, A. (2016) Stream-flow forecasting using extreme learning machines: A case study in a semi-arid region in Iraq. Journal of Hydrology, 542. pp. 603-614. ISSN 0022-1694

Yaseen, Zaher and Ehteram, Mohammad and Sharafati, Ahmad and Shahid, Shamsuddin and Al-Ansari, Nadhir and El-Shafie, Ahmed (2018) The Integration of Nature-Inspired Algorithms with Least Square Support Vector Regression Models: Application to Modeling River Dissolved Oxygen Concentration. Water, 10 (9). p. 1124. ISSN 2073-4441

Yaseen, Zaher Mundher and Allawi, Mohammed Falah and Yousif, Ali A. and Jaafar, Othman and Hamzah, Firdaus Mohamad and El-Shafie, Ahmed (2018) Non-tuned machine learning approach for hydrological time series forecasting. Neural Computing and Applications, 30 (5). pp. 1479-1491. ISSN 0941-0643

Yaseen, Zaher Mundher and Fu, Minglei and Wang, Chen and Mohtar, Wan Hanna Melini Wan and Deo, Ravinesh C. and El-Shafie, Ahmed (2018) Application of the Hybrid Artificial Neural Network Coupled with Rolling Mechanism and Grey Model Algorithms for Streamflow Forecasting Over Multiple Time Horizons. Water Resources Management, 32 (5). pp. 1883-1899. ISSN 0920-4741

Yaseen, Zaher Mundher and Karami, Hojat and Ehteram, Mohammad and Mohd, Nuruol Syuhadaa and Mousavi, Sayed Farhad and Lai, Sai Hin and Kisi, Ozgur and Farzin, Saeed and Kim, Sungwon and El-Shafie, Ahmed (2018) Optimization of Reservoir Operation using New Hybrid Algorithm. KSCE Journal of Civil Engineering, 22 (11). pp. 4668-4680. ISSN 1226-7988

Yatongchai, C. and Placek, L.M. and Curran, D.J. and Towler, M.R. and Wren, A.W. (2015) Investigating the addition of SiO2–CaO–ZnO–Na2O–TiO2 bioactive glass to hydroxyapatite: Characterization, mechanical properties and bioactivity. Journal of Biomaterials Applications, 30 (5). pp. 495-511. ISSN 0885-3282

Yau, X.H. and Yew, K.Y. and Khe, C.S. and Rajalingam, S. and Lai, C.W. and Liu, W.W. (2017) Facile one pot synthesis of highly stable L-ascorbic acid coated magnetite nanoparticles dispersion. Digest Journal of Nanomaterials and Biostructures, 12 (2). pp. 401-413. ISSN 1842-3582

Yau, Y.H. (2008) A preliminary thermal comfort study in tropical buildings Located in Malaysia. International Journal of Mechanical and Materials Engineering, 3 (2). pp. 119-126. ISSN 1823-0334

Yau, Y.H. and Foo, Y.W. and Mohyi, M.H.H. (2008) A preliminary study on HVAC systems and thermal comfort in a Tropical university building in Malaysia. International Journal of Mechanical and Materials Engineering, 3 (2). pp. 160-175. ISSN 1823-0334

Yau, Y.H. and Ghazali, N.N.N. and Badarudin, A. and Goh, F.C. (2009) CFD simulation on the thermal comfort in a library building in the tropics. In: International Symposium on Computational Mechanics and 12th International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science, 29 Nov-3 Dec 2009, Macau, Hong Kong. (Submitted)

Yau, Y.H. and Heng, K.L. (2016) Modeling of a hybrid solar radiant cooling system in a high-rise building in Malaysia. In: The 14th International Conference of Indoor Air Quality., 03 - 08 July 2016, Ghent, Belgium.

Yau, Yat Huang and Tam, Jun Hao (2018) A comparison study for active chilled beam and variable air volume systems for an office building. Energy Procedia, 152. pp. 378-383. ISSN 1876-6102

Yazdi, H.M. and Ramli Sulong, N.H. (2009) Eccentricity Optimization of NGB System by using Multi-Objective Genetic Algorithm. Journal of Applied Sciences, 9 (19). pp. 3502-3512. ISSN 1812-5654

Yazdi, Hassanali Mosalman and Ramli Sulong, Nor Hafizah (2018) On the behaviour of mid-connection in off-centre bracing system. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 171 (8). pp. 598-610. ISSN 0965-0911

Yazid, H. and Arof, Hamzah and Mohd Isa, H. (2012) Automated identification of exudates and optic disc based on inverse surface thresholding. Journal of Medical Systems, 36. pp. 1997-2004.

Yazid, H. and Arof, Hamzah and Mokhtar, Norrima (2010)