Items where Division is "Faculty of Engineering" and Year is 2012

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 393.

Yasin, M.; Harun, S.W.; Arof, H., eds. (2012) Fiber optic sensors. InTech. ISBN 978-953-307-922-6

Yasin, M.; Harun, S.W.; Arof, H., eds. (2012) Optical fiber communications and devices. InTech. ISBN 978-953-307-954-7

Yasin, M.; Harun, S.W.; Arof, H., eds. (2012) Selected topics on optical fiber technology. InTech. ISBN 978-953-51-0091-1

Abd Razak, N.A.; Abu Osman, N.A.; Wan Abas, W.A.B. (2012) Kinematic comparison of the wrist movements that are possible with a biomechatronics wrist prosthesis and a body-powered prosthesis: a preliminary study. Disability and Rehabilitation: Assistive Technology (00). pp. 1-6. ISSN 1748-3107

Abdolrasol, M.G.M.; Mekhilef, S. (2012) Development of hybrid anti-islanding based on distributed generation interconnection. International Review on Modelling and Simulations, 5 (1). pp. 60-68. ISSN 19749821

Abdul Hakim, S.R. (2012) Laminar mixed convection in inclined triangular enclosures filled with water based cu nanofluid. Industrial and Engineering Chemistry Research, 51 (10). pp. 4090-4100. ISSN 0888-5885

Abdul Wahab, M.J.; Jumaat, M.Z.; Mohamad Khaidzir, M.O. (2012) Statistical technique for grouping tropical timbers into similar strength groups. Modern Applied Science, 6 (3). pp. 73-80. ISSN 1913-1852

Abdullah, M.A.; Yatim, A.H.M.; Tan, C.W.A.; Saidur, R. (2012) A review of maximum power point tracking algorithms for wind energy systems. Renewable and Sustainable Energy Reviews, 16 (5). pp. 3220-3227. ISSN 1364-0321

Abioye, O.P.; Agamuthu, P.; Abdul Aziz, A.R. (2012) Biodegradation of used motor oil in soil using organic waste amendments. Biotechnol Res Int, 2012. p. 587041. ISSN 2090-3146 (Electronic)

Abioye, O.P.; Agamuthu, P.; Abdul Aziz, A.R. (2012) Phytotreatment of soil contaminated with used lubricating oil using Hibiscus cannabinus. Biodegradation, 23 (2). pp. 277-286. ISSN 1572-9729 (Electronic) 0923-9820 (Linking)

Aboodarda, S.J.; Yosuf, A.; Abu Osman, N.A.; Thompson, M.W.; Mokhtar, A.H. (2012) The contribution of elasticresistance during the eccentric phase of a countermovement jump enhances performance. Int J Sports Physiol Perform. ISSN 1555-0265

Adikan, F.R.M.; Abu Hassan, M.R.; Abu Bakar, M.H.; Dambul, K.D. (2012) Optical-based sensors for monitoring corrosion of reinforcement rebar via an etched cladding Bragg grating. Sensors, 12 (11). pp. 15820-15826. ISSN 1424-8220

Adikan, F.R.M.; Al-Fakih, E.; Abu Osman, N.A. (2012) The use of fiber Bragg grating sensors in biomechanics and rehabilitation applications: the state-of-the-art and ongoing research topics. Sensors, 12 (10). pp. 12890-12926. ISSN 1424-8220

Adikan, F.R.M.; Hisham, H.K.; Mahdiraji, G.A.; Abas, A.F.; Mahdi, M.A. (2012) Characterization of transient response in fiber grating Fabry–Perot lasers. IEEE Photonics Journal, 4 (6). pp. 2353-2371. ISSN 1943-0655

Adikan, F.R.M.; Sandoghchi, S.R.; Yi, C.W.; Simpson, R.E.; Mahdi, M.A.; Webb, A.S.; Gates, J.C.; Holmes, C. (2012) Direct UV written optical waveguides in flexible glass flat fiber chips. Ieee Journal of Selected Topics in Quantum Electronics, 18 (5). pp. 1534-1539. ISSN 1077-260X

Adwan, S.; Arof, H. (2012) On improving dynamic time warping for pattern matching. Measurement, 45. pp. 1609-1620. ISSN 0263-2241

Adzila, S.; Sopyan, I.; Hamdi, M. (2012) Mechanochemical synthesis of hydroxyapatite nanopowder: effects of rotation speed and milling time on powder properties. Applied Mechanics and Materials, 110. pp. 3639-3644. ISSN 3037852623

Aeinehvand, M.M.; Moebius, J.; Harun, S.W.; Abd Rahman, N.; Madou, M.; Ibrahim, F. (2012) The effects of placement and geometry on thermo-pneumatic pumping on centrifugal microfluidic compact disc (CD) platforms. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Afshar, O.; Saidur, R.; Hasanuzzaman, M.; Jameel, M. (2012) A review of thermodynamics and heat transfer in solar refrigeration system. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5639-5648. ISSN 13640321

Ahamed, J.U.; Madlool, N.A.; Saidur, R.; Shahinuddin, M.I.; Kamyar, A.; Masjuki, H.H. (2012) Assessment of energy and exergy efficiencies of a grate clinker cooling system through the optimization of its operational parameters. Energy, 46 (1). pp. 664-674. ISSN 03605442

Ahamed, J.U.; Saidur, R.; Masjuki, H.H.; Sattar, M.A. (2012) Energy and thermodynamic performance of LPG as an alternative refrigerant to R-134a in a domestic refrigerator. Energy Education Science and Technology Part a-Energy Science and Research, 29 (1). pp. 597-610. ISSN 1308-772X

Ahamed, J.U.; Saidur, R.; Masjuki, H.H.; Sattar, M.A. (2012) An analysis of energy, exergy, and sustainable development of a vapor compression refrigeration system using hydrocarbon. International Journal of Green Energy, 9 (7). pp. 702-717. ISSN 1543-5075

Ahmad, J.; Rahman, M.M.; Zuhairi, M.H.A.; Ramesh, S.; Hassan, M.A.; Purbolaksono, J. (2012) High operating steam pressure and localized overheating of a primary superheater tube. Engineering Failure Analysis, 26. pp. 344-348. ISSN 1350-6307

Ahmad, S.; M.A., H.; Sabri, M.F.; Navid, M. (2012) Comparative simulation study of gas-phase propylene polymerization in fluidized bed reactors using aspen polymers and two phase models. Chemical Industry and Chemical Engineering Quarterly (00). p. 38. ISSN 1451-9372

Ahmadinia, E.; Zargar, M.; Karim, M.R.; Abdelaziz, M.; Ahmadinia, E. (2012) Performance evaluation of utilization of waste Polyethylene Terephthalate (PET) in stone mastic asphalt. Construction and Building Materials, 36. pp. 984-989. ISSN 09500618

Ahmady, A.; Hashim, M.A.; Aroua, M.K. (2012) Kinetics of carbon dioxide absorption into aqueous MDEA+bmimBF 4 solutions from 303 to 333K. Chemical Engineering Journal, 200-20. pp. 317-328. ISSN 1385-8947

Ahmed, R.A.; Mekhilef, S.; Ping, H.W. (2012) Asymmetrical multilevel inverter topology with reduced number of switches. International Review of Electrical Engineering, 7 (4). pp. 4761-4767. ISSN 18276660

Al-Dabbagh, R.D.; Baba, M.S.; Mekhilef, S.; Kinsheel, A. (2012) The compact genetic algorithm for likelihood estimator of first order moving average model. In: 2012 2nd International Conference on Digital Information and Communication Technology and its Applications, DICTAP 2012, Bangkok.

Al-Fakih, E.; Abu Osman, N.A.; Mahamd Adikan, F.R. (2012) The sse of fiber bragg grating sensors in biomechanics and rehabilitation applications: the state-of-the-art and ongoing research topics. Sensors, 12 (10). pp. 12890-12926. ISSN 1424-8220

Alam, M.A.; Jumaat, M.Z. (2012) Experimental investigations on U- and L-shaped end anchored CFRP laminate strengthened reinforced concrete beams. Arabian Journal for Science and Engineering, 37 (4). pp. 905-919. ISSN 1319-8025

Ale Ebrahim, N. (2012) Virtual R&D teams definition. Nader Ale Ebrahim's White Papers, 1 (1). pp. 1-2.

Ale Ebrahim, N.; Ahmed, S.; Abdul Rashid, S.H.; Taha, Z. (2012) Effective virtual teams for new product development. Scientific Research and Essay, 7 (21). pp. 1971-1985. ISSN 1992-2248

Ale Ebrahim, N.; Ahmed, S.; Abdul Rashid, S.H.; Taha, Z. (2012) Technology use in the virtual R&D teams. American Journal of Engineering and Applied Sciences, 5 (1). pp. 9-14. ISSN 1793-8244

Ale Ebrahim, N.; Ahmed, S.; Abdul Rashid, S.H.; Taha, Z.; Mohammadjafari, M. (2012) Process construct in the virtual R&D teams. Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2012. pp. 1822-1828.

Ali, B.S.; Ali, B.H.; Yusoff, R.; Aroua, M.K. (2012) Carbon steel corrosion behaviors in carbonated aqueous mixtures of monoethanolamine and 1-n-butyl-3-methylimidazolium tetrafluoroborate. International Journal of Electrochemical Science, 7 (5). pp. 3835-3853. ISSN 1452-3981

Ali, M.B.; Saidur, R.; Hasanuzzaman, M.; Ward, T.A. (2012) Energy and emission analysis in the malaysian food industries. Environmental Progress and Sustainable Energy, 27 (4). n/a-n/a. ISSN 1944-7450

Ali, M.S.; Abu Bakar, A.H.; Mokhlis, H.; Aroff, H.; Illias, H.A.; Aman, M.M. (2012) High impedance fault localization in a distribution network using the discrete wavelet transform. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Ali, S.; Osman, N.A.A.; Mortaza, N.; Eshraghi, A.; Gholizadeh, H.; Wan Abas, W.A.B. (2012) Clinical investigation of the interface pressure in the trans-tibial socket with Dermo and Seal-In X5 liner during walking and their effect on patient satisfaction. Clinical Biomechanics, 27 (9). pp. 943-948. ISSN 0268-0033

Ali, S.; Osman, N.A.A.; Naqshbandi, M.M.; Eshraghi, A.; Kamyab, M.; Gholizadeh, H. (2012) Qualitative study of prosthetic suspension systems on individuals with transtibial amputations aatisfaction and perceived problems with their prosthetic devices. Archives of Physical Medicine and Rehabilitation, 93 (11). pp. 1919-1923. ISSN 0003-9993

Aman, M.M.; Jasmon, G.; Mokhlis, H.; Khan, Q.A.; Bakar, A.H.A.; Karimi, M. (2012) Modeling and simulation of digital frequency relay for generator protection. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Aman, M.M.; Jasmon, G.B.; Bakar, A.H.A.; Mokhlis, H. (2012) Optimum capacitor placement and sizing for distribution system based on an improved voltage stability index. International Review of Electrical Engineering-Iree, 7 (3). pp. 4622-4630. ISSN 1827-6660

Aman, M.M.; Jasmon, G.B.; Mokhlis, H.; Bakar, A.H.A. (2012) Analysis of the performance of domestic lighting lamps. Energy Policy, 52. pp. 482-500. ISSN 0301-4215

Aman, M.M.; Jasmon, G.B.; Mokhlis, H.; Bakar, A.H.A. (2012) Optimal placement and sizing of a DG based on a new power stability index and line losses. International Journal of Electrical Power & Energy Systems, 43 (1). pp. 1296-1304. ISSN 0142-0615

Ambran, S.; Holmes, C.; Gates, J.C.; Webb, A.S.; Carpenter, L.G.; Adikan, F.R.M.; Smith, P.G.R.; Sahu, J.K. (2012) Fabrication of a multimode interference device in a low-loss flat-fiber platform using physical micromachining technique. Journal of Lightwave Technology, 30 (17). pp. 2870-2875. ISSN 0733-8724

Amindoust, A.; Ahmed, S.; Saghafinia, A. (2012) A taxonomy and review on supplier selection methods under uncertainty. Science, 7 (1). ISSN 1095-9203

Amindoust, A.; Ahmed, S.; Saghafinia, A.; Bahreininejad, A. (2012) Sustainable supplier selection: a ranking model based on fuzzy inference system. Applied Soft Computing, 12 (6). pp. 1668-1677. ISSN 1568-4946

Amiriyan, M.; Chew, W.J.; Ramesh, S.; Tolouei, R.; Hassan, M.A.; Hossain, A.; Sopyan, I.; Meenaloshini, S. (2012) Mechanical and electrical properties of Y-TZP/ZrB2 composite. Advanced Materials Research, 576. pp. 228-231.

Ananthanathorn, K.; Nukman, Y.; Tamrin, K.F. (2012) Employment of automation system in food canning of corn products. 5th AUN/SEED-Net Regional Conference on Manufacturing Engineering. (In Press)

Arafat, M.M.; Dinan, B.; Akbar, S.A.; Haseeb, A.S.M.A. (2012) Gas sensors based on one dimensional nanostructured metal-oxides: a review. Sensors, 12. pp. 7207-7258. ISSN 1424-8220

Armstrong, D.E.J.; Haseeb, A.S.M.A.; Roberts, S.G.; Wilkinson, A.J.; Bade, K. (2012) Nanoindentation and micro-mechanical fracture toughness of electrodeposited nanocrystalline Ni-W alloy films. Thin Solid Films, 520 (13). pp. 4369-4372. ISSN 0040-6090

Askari, E.; Mehrali, M.; Metselaar, I.H.S.C.; Kadri, N.A.; Rahman, M.M. (2012) Fabrication and mechanical properties of Al2O3/SiC/ZrO2 functionally graded material by electrophoretic deposition. Journal of the Mechanical Behavior of Biomedical Materials, 12. pp. 144-150. ISSN 1751-6161

Askari, E.; Mehrali, M.; Metselaar, I.H.S.C.; Kadri, NA; Rahman, M.M. (2012) Fabrication and mechanical properties of functionally graded material by electrophoretic deposition. Journal of the Mechanical Behavior of Biomedical Materials, 12. pp. 144-150. ISSN 1751-6161

Asli, H.; Ahmadinia, E.; Zargar, M.; Karim, M.R. (2012) Investigation on physical properties of waste cooking oil - Rejuvenated bitumen binder. Construction and Building Materials, 37. pp. 398-405. ISSN 0950-0618

Atabani, A.E.; Saidur, R.; Silitonga, A.S.; Mahlia, T.M.I. (2012) Energy economical and environmental analysis of industrial boilers using VSD. Applied Mechanics and Materials, 110. pp. 3223-3233. ISSN 3037852623

Atadashi, I.M.; Aroua, M.K.; Abdul Aziz, A.R.; Sulaiman, N.M.N. (2012) High quality biodiesel obtained through membrane technology. Journal of Membrane Science, 421-42. pp. 154-164. ISSN 03767388 (ISSN)

Atadashi, I.M.; Aroua, M.K.; Abdul Aziz, A.R.; Sulaiman, N.M.N. (2012) The effects of catalysts in biodiesel production: a review. Journal of Industrial and Engineering Chemistry. ISSN 1226086X (ISSN)

Atadashi, I.M.; Aroua, M.K.; Abdul Aziz, A.R.; Sulaiman, N.M.N. (2012) The effects of water on biodiesel production and refining technologies: A review. Renewable and Sustainable Energy Reviews, 16 (5). pp. 3456-3470. ISSN 13640321 (ISSN)

Atadashi, I.M.; Aroua, M.K.; Aziz, A.R.A.; Sulaiman, N.M.N. (2012) Production of biodiesel using high free fatty acid feedstocks. Renewable & Sustainable Energy Reviews, 16 (5). pp. 3275-3285. ISSN 1364-0321

Attaran, A.; Moghavvemi, M.; Jamuar, S.S. (2012) FGMOS-based NMC-RC frequency compensation differential amplifier for low power low voltage applications. In: 2012 1st International Conference on Informatics, Electronics and Vision, ICIEV 2012, 18 - 19 May 2012, Dhaka, Bangladesh.

Awalin, L.J.; Mokhlis, H.; Bakar, A.H.A. (2012) Recent developments in fault location methods for distribution networks. Przeglad Elektrotechniczny, 88 (12 A). pp. 206-212. ISSN 0033-2097

Awalin, L.J.; Mokhlis, H.; Halim, A.H.A. (2012) Improved fault location on distribution network based on multiple measurements of voltage sags pattern. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Aziz, A.A.; Cheng, C.K.; Ibrahim, S.; Matheswaran, M.; Saravanan, P. (2012) Visible light improved, photocatalytic activity of magnetically separable titania nanocomposite. Chemical Engineering Journal, 183. pp. 349-356. ISSN 13858947

Aziz, A.A.; Yong, K.S.; Ibrahim, S.; Pichiah, S. (2012) Enhanced magnetic separation and photocatalytic activity of nitrogen doped titania photocatalyst supported on strontium ferrite. Journal of Hazardous Materials, 199-20. pp. 143-150. ISSN 0304-3894

Aziz, N.; Yusoff, R.; Aroua, M.K. (2012) Absorption of CO 2 in aqueous mixtures of N-methyldiethanolamine and guanidinium tris(pentafluoroethyl)trifluorophosphate ionic liquid at high-pressure. Fluid Phase Equilibria, 322-32. pp. 120-125. ISSN 03783812

Aziz, N.; Yusoff, R.; Aroua, M.K. (2012) Absorption of CO2 in aqueous mixtures of N-methyldiethanolamine and guanidinium tris (pentafluoroethyl) trifluorophosphate ionic liquid at high-pressure. Fluid Phase Equilibria, 322-32. pp. 120-125. ISSN 03783812

Babaei, A; Faraji, G; Mashhadi, MM; Hamdi, M (2012) Repetitive forging (RF) using inclined punches as a new bulk severe plastic deformation method. Materials Science and Engineering: A, 558. pp. 150-157. ISSN 0921-5093

Baghaee Moghaddam, T.; Karim, M.R.; Syammaun, T. (2012) Dynamic properties of stone mastic asphalt mixtures containing waste plastic bottles. Construction and Building Materials, 34. pp. 236-242. ISSN 09500618

Bahari, H.; Abd Aziz, S.H.; Kamari, H.M.; Yunus, W.M.M.; Adikan, F.R.M. (2012) The effect of bismuth on the structure and mechanical properties of GeO2-PbO-Bi2O3 ternary bulk glass system. Journal of the Ceramic Society of Japan, 120 (1403). pp. 280-285. ISSN 1882-0743

Bahari, H.R.; Sidek, H.A.A.; Adikan, F.R.M.; Yunus, W.M.M.; Halimah, M.K. (2012) Infrared Study of Er3+/Yb3+ Co-Doped GeO2-PbO-Bi2O3 Glass. International Journal of Molecular Sciences, 13 (7). pp. 8609-8614. ISSN 1661-6596

Bakar, A.H.A.; Mokhlis, H.; Illias, N.A.; Chong, P.L. (2012) The study of directional overcurrent relay and directional earth-fault protection application for 33 kV underground cable system in Malaysia. International Journal of Electrical Power & Energy Systems, 40 (1). pp. 113-119. ISSN 0142-0615

Bani Hashim, A.Y.; Abu Osman, N.A.; Wan Abas, W.A.B.; Abdul Latif, L. (2012) Approximating the relationship among the degree of the reaction forces and the nodes on footprint during a stance phase. Applied Mathematical Modelling. ISSN 0307-904X

Baroutian, S.; Aroua, M.K.; Abdul Aziz, A.R.; Sulaiman, N.M.N. (2012) TiO 2/Al 2O 3 membrane reactor equipped with a methanol recovery unit to produce palm oil biodiesel. International Journal of Energy Research, 36 (1). pp. 120-129. ISSN 0363907X (ISSN)

Basir, S.M.; Mahdiraji, G.A.; Malekmohammadi, A.; Ibrahim, N.H.; Abas, A.F.; Abdullah, M.K.; Mohamed, N.; Idrus, S.M.; Mohammad, A.B.; Harun, H. (2012) Proof-of-concept experiment of duty cycle division multiplexing with bit error rate analysis. Open Electrical & Electronic Engineering Journal, 6. pp. 1-6. ISSN 1874-1290

Bhuiya, M.M.K.; Ahamed, J.U.; Chowdhury, M.S.U.; Sarkar, M.A.R.; Salam, B.; Saidur, R.; Masjuki, H.H.; Kalam, M.A. (2012) Heat transfer enhancement and development of correlation for turbulent flow through a tube with triple helical tape inserts. International Communications in Heat and Mass Transfer, 39 (1). pp. 94-101. ISSN 0735-1933

Bhuiya, M.M.K.; Ahamed, J.U.; Sarkar, M.A.R.; Salam, B.; Masjuki, H.H.; Kalam, M.A.; Saidur, R.; Sayem, A.S.M. (2012) Heat transfer and pressure drop characteristics in turbulent flow through a tube. Experimental Heat Transfer, 25 (4). pp. 301-322. ISSN 1521-0480

Bonab, R.S.; Rahman, S. (2012) Clean automotive technology: Hydraulic hybrid vehicles (HHVs). Applied Mechanics and Materials, 165. pp. 12-15. ISSN 1662-7482

Chakrabarti, M.H.; Ali, M.; Usmani, J.N.; Khan, N.A.; Hasan, D.B.; Islam, M.S.; Abdul Raman, A.A.; Yusoff, R.; Irfan, M.F. (2012) Status of biodiesel research and development in Pakistan. Renewable and Sustainable Energy Reviews, 16 (7). pp. 4396-4405. ISSN 13640321

Chan, C.H.; Ngoh, G.C.; Yusoff, R. (2012) A brief review on anti diabetic plants: global distribution, active ingredients, extraction techniques and acting mechanisms. Pharmacognosy Reviews, 6 (11). pp. 22-28. ISSN 0976-2787

Cheng, X.S.; Hamida, B.A.; Naji, A.W.; Arof, H.; Ahmad, H.; Harun, S.W. (2012) Compact and wide-band bismuth-based erbium-doped fibre amplifier based on two-stage and double-pass approaches. IET Optoelectronics, 6 (3). pp. 127-130.

Chong, W.Y.; Lim, K.S.; Lim, W.H.; Harun, S.W.; Adikan, F.R.M.; Ahmad, H. (2012) Spreading profile of evaporative liquid drops in thin porous layer. Physical Review E, 85 (1). 016314. ISSN 1539-3755

Choudhury, I. A.; Lawal, S.A.; Nukman, Y. (2012) Developments in the formulation and application of vegetable oil-based metalworking fluids in turning process. The International Journal of Advanced Manufacturing Technology. pp. 1-12. ISSN 0268-3768

Choudhury, I.A.; Bhuiyan, M.S.H.; Nukman, Y. (2012) An innovative approach to monitor the chip formation effect on tool state using acoustic emission in turning. International Journal of Machine Tools and Manufacture, 58. pp. 19-28. ISSN 0890-6955

Choudhury, I.A.; Bhuiyan, M.S.H.; Nukman, Y. (2012) A new approach to investigate tool condition using dummy tool holder and sensor setup. The International Journal of Advanced Manufacturing Technology, 61 (5-8). pp. 465-479. ISSN 0268-3768

Cui, M.; Jang, M.; Cho, S.H.; Khim, J.; Cannon, F.S. (2012) A continuous pilot-scale system using coal-mine drainage sludge to treat acid mine drainage contaminated with high concentrations of Pb, Zn, and other heavy metals. Journal of Hazardous Materials, 215-21. pp. 122-128. ISSN 0304-3894

Cui, M.; Jang, M.; Lee, S.; Khim, J. (2012) Sonochemical oxidation of cyanide using potassium peroxydisulfate as an oxidizing agent. Japanese Journal of Applied Physics, 51 (7). ISSN 0021-4922

Dahalan, W.M.; Mokhlis, H. (2012) Network reconfiguration for loss reduction with distributed generations using PSO. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Dahari, M.; Liu, Y. (2012) A review of auto-guided-vehicles routing algorithms. Advanced Materials Research, 479. pp. 443-456.

Davoodi, M.M.; Sapuan, S.M.; Aidy, A.; Abu Osman, N.A.; Oshkour, A.A.; Abas, W.A.B.W. (2012) Development process of new bumper beam for passenger car: a review. Materials & Design, 40. pp. 304-313. ISSN 0261-3069

Dhakshyani, R.; Nukman, Y.; Abu Osman, N.A. (2012) Rapid prototyping models for dysplastic hip surgeries in Malaysia. European Journal of Orthopaedic Surgery and Traumatology, 22 (1). pp. 41-46. ISSN 1633-8065

Dhakshyani, R.; Nukman, Y.; Azuan, A.N. (2012) FDM models and FEA in dysplastic hip. Rapid Prototyping Journal, 18 (3). pp. 215-221. ISSN 1355-2546

Diya'Uddeen, B.H.; Abdul Aziz, A.R.; Daud, W.M.A.W.; Chakrabarti, M.H. (2012) Performance evaluation of biodiesel from used domestic waste oils: a review. Process Safety and Environmental Protection, 90 (3). pp. 164-179. ISSN 09575820 (ISSN)

Doufesh, H.; Faisal, T.; Lim, K.S.; Ibrahim, F. (2012) EEG spectral analysis on muslim prayers. Applied Psychophysiology Biofeedback, 37 (1). pp. 11-18. ISSN 1090-0586

Endut, Z.; Hamdi, M.; Basirun, W.J. (2012) Pseudocapacitive performance of vertical copper oxide nanoflakes. Thin Solid Films. ISSN 0040-6090

Endut, Z.; Hamdi, M.; Basirun, W.J. (2012) Supercapacitance of bamboo-type anodic titania nanotube arrays. Surface and Coatings Technology. ISSN 0257-8972

Eshraghi, A.; Abu Osman, N.A.; Karimi, M.T.; Gholizadeh, H.; Ali, S.; Wan Abas, W.A.B. (2012) Quantitative and qualitative comparison of a new prosthetic suspension system with two existing suspension systems for lower limb amputees. American Journal of Physical Medicine and Rehabilitation, 91 (12). pp. 1028-1038. ISSN 0894-9115

Eshraghi, A.; Maroufi, N.; Sanjari, M.A.; Saeedi, H.; Keyhani, M.R.; Gholizadeh, H.; Osman, N.A.A. (2012) Effect of Milwaukee brace on static and dynamic balance of female hyperkyphotic adolescents. Prosthetics and Orthotics International. ISSN 0309-3646

Fadli, A.; Sopyan, I.; Ramesh, S. (2012) Porous alumina from protein foaming-consolidation method containing hydrothermal derived hydroxyapatite powder. Applied Mechanics and Materials, 117-11. pp. 782-785. ISSN 3037852801

Faisal, T.; Taib, M.N.; Ibrahim, F. (2012) Adaptive Neuro-Fuzzy Inference System for diagnosis risk in dengue patients. Expert Systems with Applications, 39 (4). pp. 4483-4495. ISSN 0957-4174

Faisal, T.; Taib, M.N.; Ibrahim, F. (2012) Neural network diagnostic system for dengue patients risk classification. Journal of Medical Systems, 36 (2). pp. 661-676. ISSN 0148-5598

Faraji, G; Abrinia, K; Mashhadi, MM; Hamdi, M (2012) An upper-bound analysis for frictionless TCAP process. Archive of Applied Mechanics. pp. 1-11. ISSN 0939-1533

Fayyadh, M. M.; Abdul Razak, H. (2012) Assessment of adhesive setting time in reinforced concrete beams strengthened with carbon fibre reinforced polymer laminates. Materials & Design, 37. pp. 64-72. ISSN 0261-3069

Fayyadh, M. M.; Abdul Razak, H. (2012) Assessment of effectiveness of CFRP repaired RC beams under different damage levels based on flexural stiffness. Construction and Building Materials, 37. pp. 125-134. ISSN 09500618

Fayyadh, M. M.; Abdul Razak, H. (2012) Condition assessment of elastic bearing supports using vibration data. Construction and Building Materials, 30. pp. 616-628. ISSN 0950-0618

Fazal, M.A.; Haseeb, A.S.M.A.; Masjuki, H.H. (2012) Degradation of automotive materials in palm biodiesel. Energy, 40 (1). pp. 76-83. ISSN 0360-5442

Fuad, M.N.M.; Hussain, M.A.; Zakaria, A. (2012) Optimization strategy for long-term catalyst deactivation in a fixed-bed reactor for methanol synthesis process. Computers & Chemical Engineering, 44. pp. 104-126. ISSN 0098-1354

Gamil, A.A.A.; Mekhilef, S.; Said, S.M. (2012) Techno economic analysis of using solar water heaters with evacuated tubes in Khartoum, Sudan. Energy Education Science and Technology Part A: Energy Science and Research, 28 (2). pp. 611-622. ISSN 1308772X

Ghani, A.R.A.; Hassan, M.A.; Taha, Z.; Hamdi, M. (2012) Effect of slot geometry on the impact response of square column. Advanced Science Letters, 13 (1). pp. 1-7. ISSN 1936-6612

Gholizadeh, H.; Abu Osman, N.A.; Kamyab, M.; Eshraghi, A.; Abas, W.A.; Azam, M.N. (2012) Transtibial prosthetic socket pistoning: Static evaluation of Seal-In (R) X5 and Dermo (R) Liner using motion analysis system. Clinical Biomechanics, 27 (1). pp. 34-39. ISSN 0268-0033

Gholizadeh, H.; Abu Osman, N.A.; Kamyab, M.; Eshraghi, A.; Abas, W.A.B.W.; Azam, M.N. (2012) Transtibial prosthetic socket pistoning: static evaluation of Seal-In((R)) X5 and Dermo((R)) Liner using motion analysis system. Clinical Biomechanics, 27 (1). pp. 34-39. ISSN 0268-0033

Gholizadeh, H.; Abu Osman, N.A.; Kamyab, M.; Eshraghi, A.; Luviksdottir, A.G.; Wan Abas, W.A. (2012) Clinical evaluation of two prosthetic suspension systems in a bilateral transtibial amputee. American Journal of Physical Medicine & Rehabilitation, 91 (10). pp. 894-898. ISSN 0894-9115

Gholizadeh, H.; Abu Osman, N.A.; Kamyab, M.; Eshraghi, A.; Lúvíksdóttir, A.G.; Wan Abas, W.A.B. (2012) Clinical evaluation of two prosthetic suspension systems in a bilateral transtibial amputee. American Journal of Physical Medicine and Rehabilitation, 91 (10). pp. 894-898. ISSN 0894-9115

Gholizadeh, H.; Osman, N.A.A.; Eshraghi, A.; Ali, S.; Sævarsson, S.K.; Wan Abas, W.A.B.; Pirouzi, G.H. (2012) Transtibial prosthetic suspension: less pistoning versus easy donning and doffing. Journal of Rehabilitation Research and Development, 49 (9). pp. 1321-1330. ISSN 0748-7711

Gurung, A.; Kim, S.H.; Joo, J.H.; Jang, M.; Oh, S.E. (2012) Assessing toxicities of industrial effluents and 1,4-dioxane using sulphur-oxidising bacteria in a batch test. Water and Environment Journal, 26 (2). pp. 224-234. ISSN 1747-6585

Hajimolana, S.; Hussain, M.A.; Soroush, M.; Wan Daud, W.A.; Chakrabarti, M.H. (2012) Multilinear-model predictive control of a tubular solid oxide fuel cell system. Industrial & Engineering Chemistry Research, 52 (1). pp. 430-441. ISSN 0888-5885

Hajimolana, S.A.; Hussain, M.A.; Daud, W.M.A.W.; Chakrabarti, M.H. (2012) Dynamic modelling and sensitivity analysis of a tubular SOFC fuelled with NH3 as a possible replacement for H2. Chemical Engineering Research and Design, 90 (11). pp. 1871-1882. ISSN 02638762

Hajimolana, S.A.; Hussain, M.A.; Daud, W.M.A.W.; Chakrabarti, M.H. (2012) Neural network predictive control of a SOFC fuelled with ammonia. International Journal of Electrochemical Science, 7 (4). pp. 3737-3749. ISSN 1452-3981

Hajimolana, S.A.; Hussain, M.A.; Natesan, J.; Tonekaboni Moghaddam, S.M. (2012) Neural network predictive control of a tubular solid oxide fuel cell. Computer Aided Chemical Engineering, 31. pp. 390-394. ISSN 15707946

Hajimolana, S.A.; Hussain, M.A.; Soroush, M.; Daud, W.M.A.W.; Chakrabarti, M.H. (2012) Modeling of a tubular-SOFC: the effect of the thermal radiation of fuel components and CO participating in the electrochemical process. Fuel Cells, 12 (5). pp. 761-772. ISSN 1615-6846

Hakim, S.J.S.; Abdul Razak, H. (2012) Damage detection of steel bridge girder using Artificial Neural Networks. In: 5th International Conference on Emerging Technologies in Non-Destructive Testing, NDT, 2012, Ioannina.

Hakim, S.J.S.; Razak, H.A. (2012) Damage identification using experimental modal analysis and adaptive neuro-fuzzy interface system (ANFIS). In: 30th IMAC, A Conference on Structural Dynamics, 2012, 2012, Jacksonville, FL.

Hamdan, Ahmad; Sarhan, Ahmed AD; Hamdi, Mohd (2012) An optimization method of the machining parameters in high-speed machining of stainless steel using coated carbide tool for best surface finish. The International Journal of Advanced Manufacturing Technology, 58 (1-4). pp. 81-91. ISSN 0268-3768

Hamida, B.A.; Cheng, X.S.; Harun, S.W.; Naji, A.W.; Arof, H.; Al-Khateeb, W.; Khan, S.; Ahmad, H. (2012) Wideband and flat-gain amplifier based on high concentration erbium-doped fibres in parallel double-pass configuration. Quantum Electronics, 42 (3). pp. 241-243. ISSN 1063-7818

Hamida, B.A.; Cheng, X.S.; Harun, S.W.; Naji, A.W.; Arof, H.; Khan, S.; Alkhateeb, W.; Ahmad, H. (2012) Wideband and compact erbium-doped fiber amplifier using parallel double-pass configuration. Quantum Electronics, 54 (3). pp. 629-631. ISSN 1063-7818

Haque, A.; Lim, B.H.; Haseeb, A.S.M.A.; Masjuki, H.H. (2012) Die attach properties of Zn-Al-Mg-Ga based high-temperature lead-free solder on Cu lead-frame. Journal of Materials Science-Materials in Electronics, 23 (1). pp. 115-123. ISSN 0957-4522

Harizam, M.Z.; Nukman, Y.; Anis, M.; Tamrin, K.F. (2012) Investigation of surface roughness in machining oil palm wood. In: MPOB International Oil Palm Biomass Conference 2012, 20-21 September 2012, Kuala Lumpur, Malaysia. (In Press)

Hasan, D.B.; Abdul Aziz, A.R.; Daud, W.M. (2012) Using D-optimal experimental design to optimise remazol black B mineralisation by Fenton-like peroxidation. Environmental Technology, 33 (10-12). pp. 1111-1121. ISSN 09593330

Hasan, D.B.; Aziz, A.R.A.; Daud, W.M.A.W. (2012) Oxidative mineralisation of petroleum refinery effluent using Fenton-like process. Chemical Engineering Research & Design, 90 (2). pp. 298-307. ISSN 0263-8762

Haseeb, A.S.M.A.; Arafat, M.M.; Johan, M.R. (2012) Stability of molybdenum nanoparticles in Sn-3.8Ag-0.7Cu solder during multiple reflow and their influence on interfacial intermetallic compounds. Materials Characterization, 64. pp. 27-35. ISSN 1044-5803

Hashimoto, S.; Ohmura, N.; Kim, S.J.; Ibrahim, S.B. (2012) Advances in mixing technology: recent advances in mixing research and development. International Journal of Chemical Engineering, 2012. pp. 1-2. ISSN 1687-8078

Hassan, L.H.; Moghavvemi, M.; Almurib, H.A.F; Muttaqi, K.M.; Du, H. (2012) Damping of low-frequency oscillations and improving power system stability via auto-tuned PI stabilizer using Takagi-Sugeno fuzzy logic. International Journal of Electrical Power and Energy Systems, 38 (1). pp. 72-83. ISSN 01420615

Hassan, L.H.; Moghavvemi, M.; Almurib, H.A.F. (2012) Modeling UPFC into multi-machine power systems. Arabian Journal for Science and Engineering, 37 (6). pp. 1613-1624. ISSN 13198025

Hassan, M.A.; Abouel-Kasem, A.; El-Sharief, M.A.; Yusof, F. (2012) Evaluation of the material constants of Nitrile Butadiene Rubbers (NBR) with different Carbon Black loading (CB): FE-simulation and experimental. Polymer. ISSN 0032-3861

Hassan, M.A.; El-Sharief, M.A.; Aboul-Kasem, A.; Ramesh, S.; Purbolaksono, J. (2012) A fuzzy model for evaluation and prediction of slurry erosion of 5127 steels. Materials & Design, 39. pp. 186-191. ISSN 0261-3069

Hassan, M.A.; Hamdi, M.; Naderi, S.; Zahedi, F. (2012) Effect of curvature and thickness of aluminum shells on the energy absorption in low velocity impact. Advanced Materials Research, 488. pp. 40-45. ISSN 3037853824

Hassan, M.A.; Hamdi, M.; Noma, A. (2012) The nonlinear elastic and viscoelastic passive properties of left ventricular papillary muscle of a guinea pig heart. Journal of the Mechanical Behavior of Biomedical Materials, 5 (1). pp. 99-109. ISSN 1751-6161

Hassan, M.A.; Saleh, M.A.E.; Takakura, N.; Ramesh, S.; Purbolaksono, J. (2012) Effect of bulge shape on wrinkling formation and strength of stainless steel thin sheet. Materials & Design.

Hassan, M.A.; Saleh, M.A.E.; Takakura, N.; Ramesh, S.; Purbolaksono, J. (2012) Effect of bulge shape on wrinkling formation and strength of stainless steel thin sheet. Materials & Design, 42. pp. 37-45. ISSN 0261-3069

Hassan, MA; El-Sharief, MA; Aboul-Kasem, A.; Ramesh, S.; Purbolaksono, J. (2012) A fuzzy model for evaluation and prediction of slurry erosion of 5127 steels. Materials & Design, 39. pp. 186-191.

Hassan, N.H.N.; Bakar, A.H.A.; Mokhlis, H.; Illias, H.A. (2012) Analysis of arrester energy for 132kV overhead transmission line due to back flashover and shielding failure. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Hisham, H.; Amouzad Mahdiraji, G.; Abas, A.; Mahdi, M.A.; Mahamd Adikan, F.R. (2012) Characterization of transient response in a fiber grating fabry-perot lasers. Photonics Journal, IEEE, 4 (6). 2353 - 2371 . ISSN 1943-0655

Hisham, H.K.; Abas, A.F.; Mahdiraji, G.A.; Mahdi, M.A.; Muhammad Noor, A.S. (2012) Characterization of small-signal intensity modulation of single-mode fiber grating fabry–perot laser source. Optical Review, 19 (2). pp. 64-70. ISSN 1340-6000

Hisham, H.K.; Abas, A.F.; Mahdiraji, G.A.; Mahdi, M.A.; Muhammad Noor, A.S. (2012) "Theoretical calculation of turn-on delay time of VCSEL and effect of carriers recombination". Optics and Laser Technology, 44. pp. 1995-1998. ISSN 0030-3992

Hisham, H.K.; Abas, A.F.; Mahdiraji, G.A.; Mahdi, M.A.; Noor, A.S.M. (2012) Characterization of phase noise in a single-mode fiber grating Fabry Perot laser. Journal of Modern Optics, 59 (4). pp. 393-401. ISSN 0950-0340

Hisham, H.K.; Abas, A.F.; Mahdiraji, G.A.; Mahdi, M.A.; Noor, A.S.M. (2012) Characterization of small-signal intensity modulation of single-mode fiber grating fabry-perot laser source. Optical Review, 19 (2). pp. 64-70. ISSN 1340-6000

Hisham, H.K.; Abas, A.F.; Mahdiraji, G.A.; Mahdi, M.A.; Noor, A.S.M. (2012) Improving the characteristics of the modulation response for fiber Bragg grating Fabry-Perot lasers by optimizing model parameters. Optics and Laser Technology, 44 (6). pp. 1698-1705. ISSN 0030-3992

Hisham, H.K.; Abas, A.F.; Mahdiraji, G.A.; Mahdi, M.A.; Noor, A.S.M. (2012) Relative intensity noise reduction by optimizing fiber grating fabry-perot laser parameters. Ieee Journal of Quantum Electronics, 48 (3). pp. 375-383. ISSN 0018-9197

Hisham, H.K.; Abas, A.F.; Mahdiraji, G.A.; Mandi, M.A. (2012) Effect of temperature and external optical feedback on intensity and phase noise characteristics in single-mode fiber grating Fabry-Perot laser. Photonics (ICP). pp. 370-376. ISSN 978146731463

Hisham, H.K.; Mahdiraji, G.A.; Abas, A.F.; Mahdi, M.A.; Adikan, F.R.M. (2012) Characterization of turn-on time delay in a fiber grating fabry-perot lasers. Ieee Photonics Journal, 4 (5). pp. 1662-1678. ISSN 1943-0655

Hisham, H.K.; Mahdiraji, G.A.; Abas, A.F.; Mahdi, M.A.; Mahamd Adikan, F.R. (2012) Characterization of turn-on time delay in a fiber grating fabry–perot lasers. IEEE Photonics Journal, 4 (5). pp. 1661-1678. ISSN 1943-0655

Ho, Y.K.; Shamiri, A.; Mjalli, F.S.; Hussain, M.A. (2012) Control of industrial gas phase propylene polymerization in fluidized bed reactors. Journal of Process Control, 22 (6). pp. 947-958. ISSN 0959-1524

Hosen, M.A.; Hussain, M.A. (2012) Optimization and control of polystyrene batch reactor using hybrid based model. Computer Aided Chemical Engineering, 31. pp. 760-764. ISSN 15707946

Hussain, M.A.; Manan, Z.A.; Aziz, N. (2012) Recent developments on pse education and research in Malaysia. Computer Aided Chemical Engineering, 31. pp. 70-74. ISSN 15707946

Ibrahim, F.; Ahmad, S.A. (2012) Assessment of upper body muscle activity during salat and stretching exercise: a pilot study. In: IEEE-EMBS International Conference on Biomedical and Health Informatics, BHI 2012. In Conj. with the 8th Int. Symp.on Medical Devices and Biosensors and the 7th Int. Symp. on Biomedical and Health Engineering, 2012, Hong Kong and Shenzhen.

Ibrahim, F.; Ahmad, S.A. (2012) Investigation of electromyographic activity during Salat and stretching exercise. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Ibrahim, F.; Ahmad, S.A.; Woo, P.J.; Wan, W.A.B.A. (2012) Biomechanical response of the upper body during prostration in salat and the child's pose: a preliminary study. Journal of Physical Therapy Science, 24 (10). pp. 1021-1024. ISSN 0915-5287

Ibrahim, I.; Ibrahim, Z.; Khalil, K.; Mokji, M.M.; Abu Bakar, S.A.R.S.; Mokhtar, N.; Ahmad, W.K.W. (2012) An improved defect classification algorithm for six printing defects and its implementation on real printed circuit board images. International Journal of Innovative Computing Information and Control, 8 (5A). pp. 3239-3250. ISSN 1349-4198

Ibrahim, S.; Jasnin, S.N.; Wong, S.D.; Baker, I.F. (2012) Zwietering's equation for the suspension of porous particles and the use of curved blade impellers. International Journal of Chemical Engineering, 2012. pp. 1-13. ISSN 1687-8078

Ibrahim, Z.; Khalid, N.K.; Mukred, J.A.A.; Buyamin, S.; Yusof, Z.M.; Saaid, M.F.M.; Mokhtar, N.; Engelbrecht, A.R. (2012) A DNA sequence design for DNA computation based on binary vector evaluated particle swarm optimization. International Journal of Unconventional Computing, 8 (2). pp. 119-137. ISSN 15487199

Ibrehem, A.S.; Hussain, M.A.; Ghasem, N.M. (2012) Decentralized advanced model predictive controller of fluidized-bed for polymerization process. Iranian Journal of Chemistry & Chemical Engineering-International English Edition, 31 (4). pp. 91-117. ISSN 1021-9986

Ijam, A.; Saidur, R. (2012) Nanofluid as a coolant for electronic devices (cooling of electronic devices). Applied Thermal Engineering, 32. pp. 76-82. ISSN 1359-4311

Ijam, A.; Saidur, R.; Ganesan, P. (2012) Cooling of minichannel heat sink using nanofluids. International Communications in Heat and Mass Transfer, 39 (8). pp. 1188-1194. ISSN 0735-1933

Illias, H.; Low, T.J.; Bakar, A.H.A.; Mokhlis, H. (2012) Partial discharge simulation under various applied voltage waveforms. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Illias, H.; Teo, S.Y.; Bakar, A.H.A.; Mokhlis, H.; Chen, G.; Lewin, P. L. (2012) Partial discharge patterns in high voltage insulation. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Illias, H.; Tunio, M.A.; Bakar, A.H.A.; Mokhlis, H. (2012) Distribution of electric field in capacitor and surge arrester bushings. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Illias, H.A.; Bakar, A.H.A.; Mokhlis, H.; Halim, S.A. (2012) Calculation of inductance and capacitance in power system transmission lines using finite element analysis method. Obliczenia indukcyjności i pojemności linii przesyłowej z wykorzystaniem metody elementu skończonego, 88 (10 A). pp. 278-283. ISSN 00332097

Illias, H.A.; Bakar, A.H.A.; Mokhlis, H.; Tunio, M.A.; Chen, G.; Lewin, P.L.; Ariffin, A.M. (2012) Simulation of partial discharge within a void under square waveform applied voltage. In: 2012 IEEE Conference on Electrical Insulation and Dielectric Phenomena, CEIDP 2012, 2012, Montreal, QC.

Illias, H.A.; Lee, Z.H.; Bakar, A.H.A.; Mokhlis, H.; Ariffin, A.M. (2012) Distribution of electric field in medium voltage cable joint geometry. In: 2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012, 2012, Bali.

Illias, H.A.; Lee, Z.H.; Bakar, A.H.A.; Mokhlis, H.; Chen, G.; Lewin, P.L. (2012) Electric field distribution in 132 kV one piece premolded cable joint structures. In: 2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012, 2012, Bali.

Illias, H.A.; Ng, Q.L.; Bakar, A.H.A.; Mokhlis, H.; Ariffin, A.M. (2012) Electric field distribution in 132 kV XLPE cable termination model from finite element method. In: 2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012, 2012, Bali.

Ishaque, K.; Salam, Z.; Amjad, M.; Mekhilef, S. (2012) An improved particle swarm optimization (PSO) based MPPT for PV With reduced steady-state oscillation. Power Electronics, IEEE Transactions on, 27 (8). pp. 3627-3638. ISSN 0885-8993

Ishaque, K.; Salam, Z.; Mekhilef, S.; Shamsudin, A. (2012) Parameter extraction of solar photovoltaic modules using penalty-based differential evolution. Applied Energy, 99. pp. 297-308. ISSN 03062619

Islam, A.B.M.S.; Hussain, R.R.; Jameel, M.; Jumaat, M.Z. (2012) Non-linear time domain analysis of base isolated multi-storey building under site specific bi-directional seismic loading. Automation in Construction, 22. pp. 554-566. ISSN 0926-5805

Islam, A.B.M.S.; Hussain, R.R.; Jameel, M.; Jumaat, M.Z. (2012) Non-linear time domain analysis of base isolated multi-storey building under site specific bi-directional seismic loading. Automation in Construction, 22. pp. 554-566. ISSN 0926-5805

Islam, A.B.M.S.; Jameel, M.; Jumaat, M.Z. (2012) Oil and gas energy potential at Malaysian seabed and spar platform for deepwater installation. International Journal of Green Energy, 9 (2). pp. 111-120. ISSN 1543-5075

Islam, ABM; Jameel, Mohammed; Jumaat, Mohd Zamin; Shirazi, SM; Salman, Firas A (2012) Review of offshore energy in Malaysia and floating spar platform for sustainable exploration. Renewable and Sustainable Energy Reviews, 16 (8). pp. 6268-6284. ISSN 1364-0321

Islam, ABM; Jameel, Mohammed; Uddin, Md Alhaz; Jumaat, Mohd Zamin (2012) Competent building elevation for incorporating base isolation in aseismic structure. Procedia EngineeringInternational Conference on Advances Science and Contemporary Engineering 2012, 50. pp. 882-892. ISSN 1877-7058

Islam, M.R.; Rahim, N.A.; Solangi, K.H.; Saidur, R. (2012) Assessing wind energy potentiality for selected sites in Malaysia. Energy Education Science and Technology Part a-Energy Science and Research, 29 (1). pp. 611-626. ISSN 1308-772X

Ismail, M.A.; Tan, S.J.; Shahabuddin, N.S.; Harun, S.W.; Arof, H.; Ahmad, H. (2012) Performance comparison of mode-locked erbium-doped fiber laser with nonlinear polarization rotation and saturable absorber approaches. Chinese Physics Letters, 29 (5). ISSN 0256-307X

Jameel, A.B.M.M.; Islam, S.; Khaleel, M.; Jumaat, M.Z (2012) Nonlinear finite element analysis of spar platform. Advanced Science Letters, 13 (1). pp. 723-726. ISSN 19366612

Jameel, M.; Islam, A.B.M.; Salman, F.A.; Khaleel, M.; Jumaat, M.Z. (2012) Wave data for shallow and deep water sedimentary basins of Malaysia. Advanced Science Letters, 14 (1). pp. 360-364. ISSN 1936-6612

Jameel, Mohammed; Saiful Islam, ABM; Hussain, Raja Rizwan; Khaleel, M; Zaheer, MM (2012) Optimum structural modelling for tall buildings. The Structural Design of Tall and Special Buildings. ISSN 1541-7808

Jamian, J.J.; Aman, M.M.; Mustafa, M.W.; Jasmon, G.B.; Mokhlis, H.; Bakar, A.H.A.; Abdullah, M.N. (2012) Optimum multi DG units placement and sizing based on voltage stability index and PSO. In: 2012 47th International Universities Power Engineering Conference, UPEC 2012, 2012, London.

Jamian, J.J.; Lim, Z.J.; Dahalan, W.M.; Mokhlis, H.; Mustafa, M.W.; Abdullah, M.N. (2012) Reconfiguration distribution network with multiple distributed generation operation types using simplified artificial bees colony. International Review of Electrical Engineering, 7 (4). pp. 5108-5118. ISSN 1827-6660

Jamian, J.J.; Mustafa, M.W.; Mokhlis, H.; Abdullah, M.N. (2012) Comparative study on distributed generator sizing using three types of Particle Swarm Optimization. In: Intelligent Systems, Modelling and Simulation (ISMS), 2012 Third International Conference on, 2012.

Jamian, J.J.; Mustafa, M.W.; Mokhlis, H.; Usman, J. (2012) Distributed generator sizing: an iteration Particle Swarm Optimization approach. In: Proceedings of the IASTED International Conference Power and Energy Systems, AsiaPES, 2012.

Jamian, J.J.; Mustafa, M.W.; Muda, Z.; Mokhlis, H.; Aman, M.M. (2012) Effect of load models on Battery-Switching Station allocation in distribution network. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Jamil, Z.; Annuar, M.S.M.; Ibrahim, S.; Vikineswary, S. (2012) Kinetic modeling of batch photofermentation hydrogen gas production by Rhodopseudomonas palustris PBUM001. Journal of Renewable and Sustainable Energy, 4 (4). ISSN 1941-7012

Jasim, A.A.; Lim, K.S.; Muhammad, M.Z.; Arof, H.; Ahmad, H.; Harun, S.W. (2012) Transmission characteristic of multi-turn microfiber coil resonator. Optics and Laser Technology, 44. pp. 1791-1795. ISSN 0030-3992

Jeirani, Z.; Yusuf, M.M.; Jan, B.M.; Raman, A.A.A. (2012) Rheological study of saraline-based super light weight completion fluid in underbalanced perforation. Oil Gas-European Magazine, 38 (1). pp. 18-21.

Jumaat, S.A.; Musirin, I; Othman, M.M.; Moklis, H. (2012) Comparison of FACTS device installation in power transmission system. International Review on Modelling & Simulations, 5 (4). p. 1679.

Jumaat, S.A.; Musirin, I.; Othman, M.M.; Mokhlis, H. (2012) Computational intelligence based technique in multiple facts devices installation for power system security. Journal of Theoretical and Applied Information Technology, 46 (2). pp. 537-549. ISSN 1992-8645

Jumaat, S.A.; Musirin, I.; Othman, M.M.; Mokhlis, H. (2012) Optimal placement and sizing of multiple FACTS devices installation. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Jumaat, S.A.; Musirin, I.; Othman, M.M.; Mokhlis, H. (2012) Particle Swarm Optimization techniques for optimal location and sizing of thyristor controlled series capacitor. In: 2012 International Conference on Innovation, Management and Technology Research, ICIMTR 2012, 2012, Malacca.

Jumaat, S.A.; Musirin, I.; Othman, M.M.; Mokhlis, H. (2012) Placement and sizing of thyristor controlled series compensator using PSO based technique for loss minimization. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Kadri, N.A.; Razak, M.A.A.; Ibrahim, F. (2012) Near real-time electrochemical analysis of carcinogenic cell lines using planar microelectrodes. International Journal of Electrochemical Science, 7 (6). pp. 5633-5642. ISSN 1452-3981

Kadri, N.A.; Razak, M.A.A.; Ibrahim, F. (2012) Near real-time electrochemical analysis of carcinogenic cell lines using planar microelectrodes. International Journal of Electrochemical Science, 7 (6). pp. 5633-5642. ISSN 14523981

Kalantar, Z.N.; Karim, M.R.; Mahrez, A. (2012) A review of using waste and virgin polymer in pavement. Construction and Building Materials, 33. pp. 55-62. ISSN 0950-0618

Kamyar, A.; Saidur, R.; Hasanuzzaman, M. (2012) Application of computational fluid dynamics (CFD) for nanofluids. International Journal of Heat and Mass Transfer, 55 (15-16). pp. 4104-4115. ISSN 0017-9310

Karim, M.R.; Gnanendran, C.T.; Lo, S.C.R. (2012) Effect of geosynthetic reinforcement creep on the long term performance of an embankment. In: GeoCongress 2012: State of the Art and Practice in Geotechnical Engineering, 2012, Oakland, CA.

Karimi, M.; Mohamad, H.; Mokhlis, H.; Bakar, A.H.A. (2012) Under-Frequency Load Shedding scheme for islanded distribution network connected with mini hydro. International Journal of Electrical Power & Energy Systems, 42 (1). pp. 127-138. ISSN 0142-0615

Karimi, M.; Mohamad, H.; Mokhlis, H.; Bakar, A.H.A. (2012) A new approach of under-frequency load shedding technique in an islanded distribution network. International Review of Electrical Engineering, 7 (2). pp. 4155-4162. ISSN 18276660

Karimi, M.; Mokhlis, H.; Bakar, A.H.A.; Laghari, J.A.; Shahriari, A.; Aman, M.M. (2012) Combination of adaptive and intelligent load shedding techniques for distribution network. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Karimi, M.; Mokhlis, H.; Bakar, A.H.A.; Shahriari, A.; Faradonbeh, M.A.; Rosli, H.M. (2012) Impact of load modeling in distribution state estimation. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Karimi, M.; Mokhlis, H.; Bakar, A.H.A.; Shahriari, A.; Kazeminejad, M. (2012) Distribution state estimation incorporating load modelling. Przeglad Elektrotechniczny, 88 (11 A). pp. 166-169. ISSN 00332097

Khaleel, O. R.; Abdul Razak, H. (2012) The effect of powder type on the setting time and self compactability of mortar. Construction and Building Materials, 36. pp. 20-26. ISSN 0950-0618

Khalil, M.; Jan, B.M.; Raman, A.A.A. (2012) The viscosity of nontraditional lightweight completion fluid at elevated temperature and pressure. Petroleum Science and Technology. pp. 1939-1945. ISSN 1091-6466

Khalil, S.H.; Aroua, M.K.; Daud, W.M.A.W. (2012) Study on the improvement of the capacity of amine-impregnated commercial activated carbon beds for Co-2 adsorbing. Chemical Engineering Journal, 183. pp. 15-20. ISSN 1385-8947

Krabbenhoft, K.; Karim, M.R.; Lyamin, A.V.; Sloan, S.W. (2012) Associated computational plasticity schemes for nonassociated frictional materials. International Journal for Numerical Methods in Engineering, 90 (9). pp. 1089-1117. ISSN 0029-5981

Krishnan, S.; Haseeb, A.S.M.A.; Johan, M.R. (2012) Preparation and low-temperature sintering of cu nanoparticles for high-power devices. IEEE Transactions on Components, Packaging, and Manufacturing Technology, 2 (4). pp. 587-592. ISSN 2156-3950

Ku, P.X.; Abu Osman, N.A.; Yusof, A.; Wan Abas, W.A. (2012) Biomechanical evaluation of the relationship between postural control and body mass index. Journal of Biomechanics, 45 (9). pp. 1638-1642. ISSN 0021-9290

Ku , P.X.; Abu Osman, N.A.; Yusof, A.; Wan Abas, W.A.B. (2012) Biomechanical evaluation of the relationship between postural control and body mass index. Journal of Biomechanics, 45 (9). pp. 1638-1642. ISSN 0021-9290

Ku , P.X.; Abu Osman , N.A.; Yusof , A.; Wan Abas , W.A. (2012) The effect on human balance of standing with toe-extension. PLoS One., 7 (7).

Kubba, H.; Mokhlis, H. (2012) An enhanced RCGA for a rapid and reliable load flow solution of electrical power systems. International Journal of Electrical Power & Energy Systems, 43 (1). pp. 304-312. ISSN 0142-0615

Laghari, J.A.; Mokhlis, H.; Halim Abu Bakar, A.B.; Karimi, M.; Shahriari, A. (2012) An intelligent under frequency load shedding scheme for islanded distribution network. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Lee, B.T.; Ranville, J.F.; Wildeman, T.R.; Jang, M.; Shim, Y.S.; Ji, W.H.; Park, H.S.; Lee, H.J. (2012) Assessment of Young Dong tributary and Imgok Creek impacted by Young Dong coal mine, South Korea. Environmental Geochemistry and Health, 34 (SUPPL.). pp. 95-103. ISSN 0269-4042

Lee, K.Y.; Chin, K.M.; Ramesh, S.; Tan, C.Y.; Hassan, M.A.; Purbolaksono, J.; Teng, W.D.; Sopyan, I. (2012) Effect of ultrasonication on synthesis of forsterite ceramics. Advanced Materials Research, 576. pp. 252-255.

Lee, K.Y.; Chin, K.M.; Ramesh, S.; Tan, C.Y.; Hassan, M.A.; Purbolaksono, J.; Teng, W.D.; Sopyan, I. (2012) Effect of ultrasonication on synthesis of forsterite ceramics. Advanced Materials Research, 576. pp. 252-255. ISSN 3037854987

Lee, K.Y.; Chin, K.M.; Ramesh, S.; Tan, C.Y.; Teng, W.D.; Sopyan, I. (2012) Characterization of forsterite bioceramics. Advanced Materials Research, 576. pp. 195-198.

Leong, K. Y.; Saidur, R.; Khairulmaini, M.; Michael, Z.; Kamyar, A. (2012) Heat transfer and entropy analysis of three different types of heat exchangers operated with nanofluids. International Communications in Heat and Mass Transfer, 39 (6). pp. 838-843. ISSN 0735-1933

Leong, K.Y.; Saidur, R.; Mahlia, T.M.I.; Yau, Y.H. (2012) Entropy generation analysis of nanofluid flow in a circular tube subjected to constant wall temperature. International Communications in Heat and Mass Transfer, 39 (8). pp. 1169-1175. ISSN 0735-1933

Leong, K.Y.; Saidur, R.; Mahlia, T.M.I.; Yau, Y.H. (2012) Modeling of shell and tube heat recovery exchanger operated with nanofluid based coolants. International Journal of Heat and Mass Transfer, 55 (4). pp. 808-816. ISSN 0017-9310

Leong, K.Y.; Saidur, R.; Mahlia, T.M.I.; Yau, Y.H. (2012) Performance investigation of nanofluids as working fluid in a thermosyphon air preheater. International Communications in Heat and Mass Transfer, 39 (4). pp. 523-529. ISSN 07351933

Liaquat, A.M.; Masjuki, H.H.; Kalam, M.A.; Varman, M. (2012) Impact of biodiesel on injector deposit formation. In: The 5th Regional Conference on New and Renewable Energy (RCNRE 2012), 26-27, September, 2012, Hanoi, Vietnam.

M., Hasanuzzaman; N.A., Rahim; M., Hosenuzzaman; R., Saidur; I.M., Mahbubul; M.M., Rashid (2012) Energy savings in the combustion based process heating in industrial sector. Renewable and Sustainable Energy Reviews, 16 (7). pp. 4527-4536. ISSN 1364-0321

Madlool, N.A.; Saidur, R.; Rahim, N.A.; Islam, M.R.; Hossian, M.S. (2012) An exergy analysis for cement industries: an overview. Renewable and Sustainable Energy Reviews, 16 (1). pp. 921-932. ISSN 1364-0321

Mahbubul, I.M.; Saidur, R.; Amalina, M.A. (2012) Investigation of viscosity of R123-TIO 2 nanorefrigerant. International Journal of Mechanical and Materials Engineering, 7 (2). pp. 146-151. ISSN 18230334

Mahbubul, I.M.; Saidur, R.; Amalina, M.A. (2012) Latest developments on the viscosity of nanofluids. International Journal of Heat and Mass Transfer, 55 (4). pp. 874-885. ISSN 0017-9310

Mahdi, EM; Hamdi, M; Meor Yusoff, MS (2012) The effect of sintering on the physical and optical properties of Nano-TiO 2 synthesized via a modified hydrothermal route. Arabian Journal for Science and Engineering. pp. 1-11. ISSN 1319-8025

Mahdiraji, G.A.; Abas, A.F. (2012) Improving the performance of electrical duty-cycle division multiplexing with optimum signal level spacing. Optics Communications, 285 (7). pp. 1819-1824. ISSN 0030-4018

Mahdiraji, G.A.; Abas, A.F. (2012) Self-Phase modulation effect on performance of 40 Gbit/s optical duty-cycle division multiplexing technique. Journal of Optical Communications. —. ISSN 2191-6322

Mahdiraji, G.A.; Abas, A.F. (2012) Self-phase modulation effect on performance of 40 Gbit=s Optical duty-cycle division multiplexing technique. Optics Communications, 33. pp. 1-7. ISSN 0030-4018

Mahdiraji, G.A.; Mohamed, A. (2012) A fuzzy expert system for classification of short duration voltage disturbances. Jurnal Teknologi, 45. pp. 41-57. ISSN 2180-3722

Mahlia, T.M.I.; Yong, J.H.; Safari, A.; Mekhilef, S. (2012) Techno-economic analysis of palm oil mill wastes to generate power for grid-connected utilization. Energy Education Science and Technology Part A: Energy Science and Research, 28 (2). pp. 1111-1130. ISSN 11308-772X

Mahmodian, M.S.; Rahmani, R.; E., Taslimi; Mekhilef., S. (2012) Step by step analyzing, modeling and simulation of single and double array PV system in different environmental variability. 2012 International Conference on Future Environment and Energy IPCBEE, 28. pp. 37-42.

Mahmoodian, R.; Rahbari, R.G.; Hamdi, M.; Sparham, M. (2012) Another attempt to adopt a machine for SHS lining ceramics inside pipes. High Temperature Material Processes. ISSN 1093-3611 (In Press)

Mashaan, N.S.; Ali, A.H.; Karim, M.R.; Abdelaziz, M. (2012) An overview of crumb rubber modified asphalt. International Journal of Physical Sciences, 7 (2). pp. 166-170. ISSN 19921950

Mekhilef, S.; Khudhur, H. I.; Belkamel, H. (2012) DC link capacitor voltage balancing in three level neutral point clamped inverter. In: 2012 IEEE 13th Workshop on Control and Modeling for Power Electronics, COMPEL 2012, 2012, Kyoto.

Mekhilef, S.; Safari, A.; Chandrasegaran, D. (2012) Feasibility study of off-shore wind farms in Malaysia. Energy Education Science and Technology Part A: Energy Science and Research, 29 (1). pp. 519-530. ISSN 1308772X

Mekhilef, S.; Safari, A.; Mustaffa, W.E.S.; Saidur, R.; Omar, R.; Younis, M.A.A. (2012) Solar energy in Malaysia: current state and prospects. Renewable and Sustainable Energy Reviews, 16 (1). pp. 386-396. ISSN 1364-0321

Mekhilef, S.; Safari, A.; Mustaffa, W.E.S.; Saidur, R.; Omar, R.; Younis, M.A.A. (2012) Solar energy in Malaysia: current state and prospects. Renewable and Sustainable Energy Reviews, 16 (1). pp. 386-396. ISSN 1364-0321

Mekhilef, S.; Saidur, R.; Kamalisarvestani, M. (2012) Effect of dust, humidity and air velocity on efficiency of photovoltaic cells. Renewable & Sustainable Energy Reviews, 16 (5). pp. 2920-2925. ISSN 1364-0321

Mekhilef, S.; Saidur, R.; Kamalisarvestani, M. (2012) Effect of dust, humidity and air velocity on efficiency of photovoltaic cells. Renewable and Sustainable Energy Reviews, 16 (5). pp. 2920-2925. ISSN 1364-0321

Mekhilef, S.; Saidur, R.; Safari, A. (2012) Comparative study of different fuel cell technologies. Renewable and Sustainable Energy Reviews, 16 (1). pp. 981-989. ISSN 1364-0321

Mekhilef, S.; Saidur, R.; Safari, A. (2012) Comparative study of different fuel cell technologies. Renewable & Sustainable Energy Reviews, 16 (1). pp. 981-989. ISSN 1364-0321

Misran, H.; Yarmo, M.A.; Ramesh, S. (2012) Synthesis and characterization of silica nanospheres using nonsurfactant template. Ceramics International.

Moghavvemi, M.; Jamuar, S.S.; Gan, E.H.; Yap, Y.C. (2012) Design of low cost flexible RGB color sensor. In: 2012 1st International Conference on Informatics, Electronics and Vision, ICIEV 2012, 18 - 19 May 2012, Dhaka, Bangladesh.

Mohammadhassani, M.; Jumaat, M.Z.; Jameel, M. (2012) Experimental investigation to compare the modulus of rupture in high strength self compacting concrete deep beams and high strength concrete normal beams. Construction and Building Materials, 30. pp. 265-273. ISSN 0950-0618

Mohammadhassani, M.; Jumaat, M.Z.; Jameel, M.; Badiee, H.; Arumugam, A.M.S. (2012) Ductility and performance assessment of high strength self compacting concrete (HSSCC) deep beams: an experimental investigation. Nuclear Engineering and Design, 250. pp. 116-124. ISSN 0029-5493

Mohammadhassani, M.; Jumaat, M.Z.; Jameel, M.; Hakim, S.J.S.; Abdollahi, N. (2012) Experimental study on the strain contribution of horizontal and vertical web reinforced bar of HSSCC deep beams. In: 5th International Conference on Emerging Technologies in Non-Destructive Testing, NDT, 2012, Ioannina.

Mohammadi, P.; Ibrahim, S.; Annuar, M.S.M. (2012) Comparative study on the effect of various pretreatment methods on the enrichment of hydrogen producing bacteria in anaerobic granulated sludge from brewery wastewater. Korean Journal of Chemical Engineering, 29 (10). pp. 1347-1351. ISSN 0256-1115

Mohammadi, P.; Ibrahim, S.; Annuar, M.S.M.; Ghafari, S.; Vikineswary, S.; Zinatizadeh, A.A. (2012) Influences of environmental and operational factors on dark fermentative hydrogen production: a review. Clean-Soil Air Water, 40 (11). pp. 1297-1305. ISSN 1863-0650

Mohammadi, P.; Ibrahim, S.; Mohamad Annuar, M.S. (2012) Effects of biomass, COD and bicarbonate concentrations on fermentative hydrogen production from POME by granulated sludge in a batch culture. International Journal of Hydrogen Energy, 37 (23). pp. 17801-17808. ISSN 0360-3199

Mohammadjafari, M.; Ahmed, S.; Dawal, S.Z.M.; Zayandehroodi, H. (2012) The role of project manager in smes for developing new product by e-collaboration. Advanced Materials Research, 433. pp. 1637-1645. ISSN 3037853190

Mohammadjafari Dr, M.; Ahmed, S.; Zawiah Md, S.; Zayandehroodi, H. (2012) A framework for sharing knowledge in product development by e-collaboration through project management. Research Journal of Applied Sciences, Engineering and Technology, 4 (6). pp. 649-659.

Mohammed, H.A.; Al-Aswadi, A.A.; Yusoff, M.Z.; Saidur, R. (2012) Buoyancy-assisted mixed convective flow over backward-facing step in a vertical duct using nanofluids. Thermophysics and Aeromechanics, 19 (1). pp. 33-52. ISSN 0869-8643

Mohammed, H.A.; Al-aswadi, A.A.; Yusoff, M.Z.; Saidur, R. (2012) Buoyancy-assisted mixed convective flow over backward-facing step in a vertical duct using nanofluids. Thermophysics and Aeromechanics, 19 (1). pp. 33-52. ISSN 0869-8643

Mohammed, H.A.; Bhaskaran, G.; Shuaib, N.H.; Abu-Mulaweh, H.I.; Saidur, R. (2012) Thermal and hydrodynamic performance analysis of circular microchannel heat exchanger utilizing nanofluids. International Journal of Numerical Methods for Heat & Fluid Flow, 22 (6-7). pp. 907-927. ISSN 0961-5539

Mokhlis, H.; Bakar, A.H.A.; Illias, H.A.; Shafie, M.F. (2012) Insulation coordination study of 275kV AIS substation in Malaysia. In: 2012 Asia-Pacific Power and Energy Engineering Conference, APPEEC 2012, 2012, Shanghai.

Mokhlis, H.; Laghari, J.A.; Bakar, A.H.A.; Karimi, M. (2012) A fuzzy Based Under-Frequency Load Shedding Scheme for islanded distribution network connected with DG. International Review of Electrical Engineering-Iree, 7 (4). pp. 4992-5000. ISSN 1827-6660

Monajemi, H.; Abdul Razak, H.; Ismail, Z. (2012) Reliability of dynamically measured flexibility matrix on damage detection of frame structures. In: 30th IMAC, A Conference on Structural Dynamics, 2012, 2012, Jacksonville, FL.

Moo, E.K.; Herzog, W.; Han, S.K.; Abu Osman, N.; Pingguan-Murphy, B.; Federico, S. (2012) Mechanical behaviour of in-situ chondrocytes subjected to different loading rates: a finite element study. Biomechanics and Modeling in Mechanobiology, 11 (7). pp. 983-993. ISSN 1617-7940

Mook, W.T.; Chakrabarti, M.H.; Aroua, M.K.; Khan, G.M.A.; Ali, B.S.; Islam, M.S.; Abu Hassan, M.A. (2012) Removal of total ammonia nitrogen (TAN), nitrate and total organic carbon (TOC) from aquaculture wastewater using electrochemical technology: A review. Desalination, 285. pp. 1-13. ISSN 0011-9164

Mousavi, S.; Ibrahim, S.; Aroua, M.K. (2012) Sequential nitrification and denitrification in a novel palm shell granular activated carbon twin-chamber upflow bio-electrochemical reactor for treating ammonium-rich wastewater. Bioresour Technol, 125. pp. 256-266. ISSN 0960-8524

Mousavi, S.; Ibrahim, S.; Aroua, M.K. (2012) Sequential nitrification and denitrification in a novel palm shell granular activated carbon twin-chamber upflow bio-electrochemical reactor for treating ammonium-rich wastewater. Bioresource Technology, 125. pp. 256-266. ISSN 0960-8524

Mousavi, S.; Ibrahim, S.; Aroua, M.K.; Ghafari, S. (2012) Development of nitrate elimination by autohydrogenotrophic bacteria in bio-electrochemical reactors - A review. Biochemical Engineering Journal, 67. pp. 251-264. ISSN 1369-703X

Mousavi, S.; Ibrahim, S.; Aroua, M.K.; Ghafari, S. (2012) Development of nitrate elimination by autohydrogenotrophic bacteria in bio-electrochemical reactors - a review. Biochemical Engineering Journal, 67. pp. 251-264. ISSN 1369-703X

Mukred, J.A.A.; Ibrahim, Z.; Ibrahim, I.; Adam, A.; Wan, K.; Yusof, Z.M.; Mokhtar, N. (2012) A binary particle swarm optimization approach to optimize assembly sequence planning. Advanced Science Letters, 13 (1). pp. 732-738. ISSN 19366612

Nadia, A.; Haseeb, A.S.M.A. (2012) Effects of addition of copper particles of different size to Sn-3.5Ag solder. Journal of Materials Science-Materials in Electronics, 23 (1). pp. 86-93. ISSN 0957-4522

Naganathan, S.; Razak, H. A.; Hamid, S. N. A. (2012) Properties of controlled low-strength material made using industrial waste incineration bottom ash and quarry dust. Materials & Design, 33 (1). pp. 56-63. ISSN 0261-3069

Narmashiri, K.; Jumaat, MZ.; Sulong, N.H.R. (2012) Strengthening of steel I-beams using CFRP strips: an investigation on CFRP bond length. Advances in Structural Engineering, 15 (12). pp. 2191-2204. ISSN 1369-4332

Narmashiri, K.; Sulong, N.H.R.; Jumaat, M.Z. (2012) Failure analysis and structural behaviour of CFRP strengthened steel I-beams. Construction and Building Materials, 30. pp. 1-9. ISSN 0950-0618

Ng, H.S.; Tan, C.P.; Mokhtar, M.N.; Ibrahim, S.; Ariff, A.; Ooi, C.W.; Ling, T.C. (2012) Recovery of Bacillus cereus cyclodextrin glycosyltransferase and recycling of phase components in an aqueous two-phase system using thermo-separating polymer. Separation and Purification Technology, 89. pp. 9-15. ISSN 1383-5866

Ong , Y.H.; Chua , A.S.; Lee , B.P.; Ngoh , G.C.; Hashim , M.A. (2012) An observation on sludge granulation in an enhanced biological phosphorus removal process. Water Environment Research, 84 (1). pp. 3-8.

Oshkour, A.; Abu Osman, N.; Yau, Y.; Tarlochan, F.; Wan Abas, W. (2012) Design of new generation femoral prostheses using functionally graded materials: a finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. ISSN 0954-4119

Pa, Nik Masmiati Nik; Sarhan, Ahmed Aly Diaa; Shukor, Mohd Hamdi Abd (2012) Optimizing the cutting parameters for better surface quality in 2.5 D cutting utilizing titanium coated carbide ball end mill. International Journal of Precision Engineering and Manufacturing, 13 (12). pp. 2097-2102. ISSN 2234-7593

Parvizi, R.; Harun, S.W.; Ali, N.M.; Arof, H.; Ahmad, H. (2012) Investigation on threshold power of stimulated Brillouin scattering in photonic crystal fiber. Optik, 123. pp. 1149-1152. ISSN 0030-4026

Pramanik, S.; Pingguan-Murphy, B.; Osman, N.A.A. (2012) Progress of key strategies in development of electrospun scaffolds: bone tissue. Science and Technology of Advanced Materials, 13 (4). 043002. ISSN 1468-6996

Radzi, N.F.M.; Mubin, M.; Rahim, N.A.; Mokhtar, N. (2012) UAV collision detection algorithm design based on circle overlapping test. In: 4th International Conference on Mechanical and Electrical Technology, ICMET 2012, 2012, Kuala Lumpur.

Rahim, N.A.; Saidur, R.; Solangi, K.H.; Othman, M.; Amin, N. (2012) Survey of grid-connected photovoltaic inverters and related systems. Clean Technologies and Environmental Policy, 14 (4). pp. 521-533. ISSN 1618-954X

Rahman, M. M.; Parvin, S.; Rahim, N. A.; Islam, M. R.; Saidur, R.; Hasanuzzaman, M. (2012) Effects of Reynolds and Prandtl number on mixed convection in a ventilated cavity with a heat-generating solid circular block. Applied Mathematical Modelling, 36 (5). pp. 2056-2066. ISSN 0307-904X

Rahman, M. S.; Rashid, M.M.; Hussain, M.A. (2012) Thermal conductivity prediction of foods by Neural Network and Fuzzy (ANFIS) modeling techniques. Food and Bioproducts Processing, 90 (C2). pp. 333-340. ISSN 0960-3085

Rahman, M.M.; Billah, M.M.; Hasanuzzaman, M.; Saidur, R.; Rahim, N.A. (2012) Heat transfer enhancement of nanofluids in a Lid-Driven square enclosure. Numerical Heat Transfer, Part A: Applications, 62 (12). pp. 973-991. ISSN 1521-0634

Rahman, M.M.; Billah, M.M.; Rahim, N.A.; Saidur, R.; Hasanuzzaman, M. (2012) Finite element simulation of magnetohydrodynamic mixed convection in a double-lid driven enclosure with a square heat-generating block. Journal of Heat Transfer-Transactions of the Asme, 134 (6). 0022-1481. ISSN 0022-1481

Rahman, M.M.; Jumaat, M.Z. (2012) Cost minimum proportioning of non-Slump concrete mix using genetic algorithms. In: 3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012, 2012, Xiamen.

Rahman, M.M.; Jumaat, M.Z.; Hosen, M.A. (2012) Genetic algorithm for material cost minimization of external strengthening system with fiber reinforced polymer. In: 3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012, 2012, Xiamen.

Rahman, M.M.; Oztop, H.F.; Rahim, N.A.; Saidur, R.; Al-Salem, K.; Amin, N.; Mamun, M.A.H.; Ahsan, A. (2012) Computational analysis of mixed convection in a channel with a cavity heated from different sides. International Communications in Heat and Mass Transfer, 39 (1). pp. 78-84. ISSN 0735-1933

Rahman, M.M.; Parvin, S.; Rahim, N.A.; Hasanuzzaman, M.; Saidur, R. (2012) Simulation of mixed convection heat transfer in a horizontal channel with an open cavity containing a heated hollow cylinder. Heat Transfer - Asian Research, 41 (4). pp. 339-353. ISSN 10992871

Rahman, M.M.; Parvin, S.; Rahim, N.A.; Hasanuzzaman, M.; Saidur, R. (2012) Simulation of mixed convection heat transfer in a horizontal channel with an open cavity containing a heated hollow cylinder. Heat Transfer - Asian Research, 41 (4). pp. 339-353. ISSN 10992871

Rahman, M.S.; Rashid, M.M.; Hussain, M.A. (2012) Thermal conductivity prediction of foods by Neural Network and Fuzzy (ANFIS) modeling techniques. Food and Bioproducts Processing, 90 (C2). pp. 333-340. ISSN 0960-3085

Rahman, N.A.; Hussain, M.A.; Jahim, J.M. (2012) Production of fructose using recycle fixed-bed reactor and batch bioreactor. Journal of Food Agriculture & Environment, 10 (2). pp. 268-273. ISSN 1459-0255

Ramesh, S.; Aw, K.L.; Tolouei, R.; Amiriyan, M.; Tan, C.Y.; Hamdi, M.; Purbolaksonoa, J.; Hassana, M.A.; Tengd, W.D. (2012) Sintering properties of hydroxyapatite powders prepared using different methods. Ceramics International. ISSN 0272-8842

Ramesh, S.; Purbolaksono, J.; Hamdi, M.; Sopyan, I.; Tolouei, R.; Amiriyan, M.; Tarlochan, F.; Teng, W.D. (2012) Low-temperature degradation (LTD) behaviour of CuO-Doped tetragonal zirconia ceramic. Ceramics-Silikáty, 56 (1). pp. 15-19. ISSN 0862-5468

Ramesh, S.; Tan, C.Y.; Tolouei, R.; Amiriyan, M.; Purbolaksono, J.; Sopyan, I.; Teng, W.D. (2012) Sintering behavior of hydroxyapatite prepared from different routes. Materials & Design, 34. pp. 148-154. ISSN 0261-3069

Razavi, S.V.; Jumaat, M.Z.; Ahmed, E.S.H.; Mohammadi, P. (2012) Using generalized regression neural network (GRNN) for mechanical strength prediction of lightweight mortar. Computers and Concrete, 10 (4). pp. 379-390. ISSN 15988198

Razman, R.; Cheong, J.P.G.; Wan Abas, W.A.B.; Abu Osman, N.A. (2012) Anthropometric and strength characteristics of tenpin bowlers with different playing abilities. Biology of Sport, 29 (1). pp. 33-38. ISSN 10.5604/20831862.979853

Rismanchi, B.; Saidur, R.; BoroumandJazi, G.; Ahmed, S. (2012) Energy, exergy and environmental analysis of cold thermal energy storage (CTES) systems. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5741-5746. ISSN 1364-0321

Rismanchi, B.; Saidur, R.; Boroumandjazi, G.; Ahmed, S. (2012) Energy, exergy and environmental analysis of cold thermal energy storage (CTES) systems. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5741-5746. ISSN 13640321

Rismanchi, B.; Saidur, R.; Masjuki, H.H.; Mahlia, T.M.I. (2012) Cost-benefit analysis of using cold thermal energy storage systems in building applications. In: 2011 2nd International Conference on Advances in Energy Engineering, ICAEE 2011, 2012, Bangkok.

Rismanchi, B.; Saidur, R.; Masjuki, H.H.; Mahlia, T.M.I. (2012) Energetic, economic and environmental benefits of utilizing the ice thermal storage systems for office building applications. Energy and Buildings, 50. pp. 347-354. ISSN 0378-7788

Rismanchi, B.; Saidur, R.; Masjuki, H.H.; Mahlia, T.M.I. (2012) Thermodynamic evaluation of utilizing different ice thermal energy storage systems for cooling application in office buildings in Malaysia. Energy and Buildings, 53. pp. 117-126. ISSN 0378-7788

Rosli, H.M.; Mokhlis, H.; Bakar, A.H.A. (2012) Optimal measurement placement using PSO for state estimation. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Roslin, E.N.; Ahmed, S. (2012) Strategies for the successful lean manufacturing implementation: a case study in a Malaysian automotive parts manufacturing. International Journal of Engineering, 1 (9).

Sadollah, Ali; Bahreininejad, Ardeshir; Eskandar, Hadi; Hamdi, Mohd (2012) Mine blast algorithm for optimization of truss structures with discrete variables. Computers & Structures, 102. pp. 49-63. ISSN 0045-7949

Safee, M.K.M.; Abas, W.; Ibrahim, F.; Abu Osman, N.A.; Salahuddin, M.H.R. (2012) Electromyographic activity of the lower limb muscles during salat and specific exercises. Journal of Physical Therapy Science, 24 (6). pp. 549-552. ISSN 0915-5287

Safee, M.K.M.; Abas, W.A.B.W.; Ibrahim, F.; Abu Osman, N.A.; Salahuddin, M.H.R. (2012) Electromyographic activity of the lower limb muscles during salat and specific exercises. Journal of Physical Therapy Science, 24 (6). pp. 549-552. ISSN 0915-5287

Safee, M.K.M.; Abas, W.A.B.W.; Ibrahim, F.; Osman, N.A.A.; Salahuddin, M.H.R. (2012) Electromyographic activity of the lower limb muscles during salat and specific exercises. Journal of Physical Therapy Science, 24 (6). pp. 549-552. ISSN 0915-5287

Safiuddin, M.; Jumaat, M.Z.; Salam, M.A. (2012) Flowing ability of self-consolidating concrete and its binder paste phase including palm oil fuel ash. Magazine of Concrete Research, 64 (10). pp. 931-944. ISSN 0024-9831

Safiuddin, M.; Rahman, M.M.; Salam, M.A.; Md.Isa, M.H.; Jumaat, M.Z. (2012) Properties of self-consolidating palm oil fuel ash concrete. Advanced Science Letters, 17 (1). pp. 312-319. ISSN 19366612

Safiuddin, M.; Salam, M.A.; Jumaat, M.Z. (2012) Correlations between different hardened properties of high-strength self-consolidating concrete including palm oil fuel ash. In: 2011 International Conference on Applied Mechanics, Materials and Manufacturing, ICAMMM 2011, 2012, Shenzhen.

Saidur, R. (2012) MHD natural convection in an enclosure from two semi-circular heaters on the bottom wall. International Journal of Heat and Mass Transfer, 55 (7-8). pp. 1844-1854. ISSN 00179310

Saidur, R.; BoroumandJazi, G.; Mekhlif, S.; Jameel, M. (2012) Exergy analysis of solar energy applications. Renewable and Sustainable Energy Reviews, 16 (1). pp. 350-356. ISSN 1364-0321

Saidur, R.; BoroumandJazi, G.; Mekhlif, S.; Jameel, M. (2012) Exergy analysis of solar energy applications. Renewable and Sustainable Energy Reviews, 16 (1). pp. 350-356. ISSN 13640321

Saidur, R.; Boroumandjazi, G.; Mekhilef, S.; Mohammed, H.A. (2012) A review on exergy analysis of biomass based fuels. Renewable and Sustainable Energy Reviews, 16 (2). pp. 1217-1222. ISSN 1364-0321

Saidur, R.; Hasanuzzaman, M.; Rahim, N.A. (2012) Energy, economic, and environmental analysis of the Malaysian industrial compressed-air systems. Clean Technologies and Environmental Policy, 14 (2). pp. 195-210. ISSN 1618-954X

Saidur, R.; Mekhilef, S.; Ali, M.B.; Safari, A.; Mohammed, H.A. (2012) Applications of variable speed drive (VSD) in electrical motors energy savings. Renewable & Sustainable Energy Reviews, 16 (1). pp. 543-550. ISSN 1364-0321

Saidur, R.; Mekhilef, S.; Ali, M.B.; Safari, A.; Mohammed, H.A. (2012) Applications of variable speed drive (VSD) in electrical motors energy savings. Renewable and Sustainable Energy Reviews, 16 (1). pp. 543-550. ISSN 13640321

Saidur, R.; Meng, T.C.; Said, Z.; Hasanuzzaman, M.; Kamyar, A. (2012) Evaluation of the effect of nanofluid-based absorbers on direct solar collector. International Journal of Heat and Mass Transfer, 55 (21-22). pp. 5899-5907. ISSN 0017-9310

Saidur, R.; Meng, T.C.; Said, Z.; Hasanuzzaman, M.; Kamyar., A. (2012) Evaluation of the effect of nanofluid-based absorbers on direct solar collector. International Journal of Heat and Mass Transfer, 55 (21-22). 5899-5907. ISSN 0017-9310

Saidur, R.; Rezaei, M.; Muzammil, W.K.; Hassan, M.H.; Paria, S.; Hasanuzzaman, M. (2012) Technologies to recover exhaust heat from internal combustion engines. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5649-5659. ISSN 13640321

Saidur, R.; Sambandam, M.T.; Hasanuzzaman, M.; Devaraj, D.; Rajakarunakaran, S. (2012) An analysis of actual energy savings in an indian cement industry through an energy efficiency index. International Journal of Green Energy, 9 (8). pp. 829-840. ISSN 1543-5075

Saidur, R.; Sambandam, M.T.; Hasanuzzaman, M.; Devaraj, D.; Rajakarunakaran, S.; Islam, M.D. (2012) An energy flow analysis in a paper-based industry. Clean Technologies and Environmental Policy, 14 (5). pp. 905-916. ISSN 1618954X

Saidur, R.; Sambandam, M.T.; Hasanuzzaman, M.; Devaraj, D.; Rajakarunakaran., S. (2012) An analysis of actual energy savings in an indian cement industry through an energy efficiency index. International Journal of Green Energy, 9 (8). pp. 829-840. ISSN 1543-5075

Sajadi, A.; Sebtahmadi, S.S.; Koniaka, M.; Biczel, P.; Mekhilef., S. (2012) Distributed control scheme for voltage regulation in smart grids. International Journal of Smart Grid and Clean Energy. ISSN 2315-4462

Sajedi, F.; Razak, H.A.; Mahmud, H.B.; Shafigh, P. (2012) Relationships between compressive strength of cement-slag mortars under air and water curing regimes. Construction and Building Materials, 31. pp. 188-196. ISSN 09500618

Sajjadi, B.; Raman, A.A.A.; Ibrahim, S.; Shah, R.S.S.R.E. (2012) Review on gas-liquid mixing analysis in multiscale stirred vessel using CFD. Reviews in Chemical Engineering, 28 (2-3). pp. 171-189. ISSN 0167-8299

Salbiah, S.; Somaya, A.; Arof, H.; Saleh, Z.S.; Ibrahim, F. (2012) A new approach to medical image stitching using minimum average correlation energy filter and peak to side-lobe ratio. International Journal of Imaging Systems and Technology, 22 (3). pp. 166-171. ISSN 0899-9457

Saleem, M.; Chakrabarti, M.H.; Hasan, D.B.; Islam, M.S.; Yussof, R.; Hajimolana, S.A.; Hussain, M.A.; Khan, G.M.A.; Ali, B.S. (2012) On site electrochemical production of sodium hypochlorite disinfectant for a power plant utilizing seawater. International Journal of Electrochemical Science, 7 (5). pp. 3929-3938. ISSN 1452-3981

Saleem, M.; Essa, M.H.; Chakrabarti, M.H.; Low, C.T.J.; Hajimolana, S.A.; Hussain, M.A.; Hashim, M.A.; Islam, M.S. (2012) An economical means for remediating a multiple-metal contaminated soil using electro-kinetic technology under natural conditions. International Journal of Electrochemical Science, 7 (9). pp. 7809-7822. ISSN 1452-3981

Samsudin, S.; Adwan, S.; Arof, H.; Mokhtar, N.; Ibrahim, F. (2012) Development of automated image stitching system for radiographic images. Journal of Digital Imaging, 26 (2). pp. 361-70. ISSN 0897-1889

Sandu, V; Chee, Ching Yern (2012) On the scaling law of the pinning force in MgB 2 superconducting composites with magnetic nanoinclusions. Journal of Superconductivity and Novel Magnetism. pp. 1-7. ISSN 1557-1939

Sarhan, A.A.D.; Sayuti, M.; Hamdi, M. (2012) Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system. The International Journal of Advanced Manufacturing Technology, 63 (5-8). pp. 505-512. ISSN 0268-3768

Sarhan, Ahmed AD; Sayuti, M; Hamdi, M (2012) Reduction of power and lubricant oil consumption in milling process using a new SiO 2 nanolubrication system. International Journal of Advanced Manufacturing Technology. pp. 1-8. ISSN 0268-3768

Sarhan, Ahmed AD; Zalnezhad, E; Hamdi, M (2012) The influence of higher surface hardness on fretting fatigue life of hard anodized aerospace AL7075-T6 alloy. Materials Science and Engineering: A. ISSN 0921-5093

Sarmani, A.R.; Abu Bakar, M.H.; Adikan, F.R.M.; Mahdi, M.A. (2012) Laser parameter variations in a rayleigh scattering-based raman fiber laser with single fiber bragg grating reflector. Ieee Photonics Journal, 4 (2). pp. 461-466. ISSN 1943-0655

Sayuti, M; Sarhan, Ahmed AD; Hamdi, M (2012) An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy. The International Journal of Advanced Manufacturing Technology. pp. 1-17. ISSN 0268-3768

Sayuti, M.; Sarhan, A.A.D.; Fadzil, M.; Hamdi, M. (2012) Enhancement and verification of a machined surface quality for glass milling operation using CBN grinding tool Taguchi approach. The International Journal of Advanced Manufacturing Technology. pp. 1-12. ISSN 0268-3768

Sayuti, M.; Sarhan, A.A.D.; Fadzil, M.; Hamdi, M. (2012) Enhancement and verification of a machined surface quality for glass milling operation using CBN grinding tool-Taguchi approach. The International Journal of Advanced Manufacturing Technology, 60 (9-12). pp. 939-950. ISSN 0268-3768

Sayuti, M.; Sarhan, A.A.D.; Tanaka, T.; Hamdi, M; Saito, Y. (2012) Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system. The International Journal of Advanced Manufacturing Technology. pp. 1-8. ISSN 0268-3768

Shafigh, P.; Jumaat, M.Z.; Bin Mahmud, H.; Hamid, N.A.A. (2012) Lightweight concrete made from crushed oil palm shell: tensile strength and effect of initial curing on compressive strength. Construction and Building Materials, 27 (1). pp. 252-258. ISSN 0950-0618

Shafigh, P.; Jumaat, M.Z.; Mahmud, H.B. (2012) Effect of replacement of normal weight coarse aggregate with oil palm shell on properties of concrete. Arabian Journal for Science and Engineering, 37 (4). pp. 955-964. ISSN 13198025

Shafigh, P.; Mahmud, H.B.; Jumaat, M.Z. (2012) Oil palm shell lightweight concrete as a ductile material. Materials and Design, 36. pp. 650-654. ISSN 02613069

Shahabuddin, N.S.; Awang, N.A.; Ahmad, H.; Arof, H.; Dimyati, K.; Yusoff, Z.; Harun, S.W. (2012) Supercontinuum generation using a passive mode-locked stretched-pulse bismuth-based erbium-doped fiber laser. Optics and Laser Technology, 44. pp. 741-743. ISSN 0030-3992

Shahla, S.; Ngoh, G.C.; Yusoff, R. (2012) Optimization of base-catalyzed ethyl ester production from palm oil. Asia-Pacific Journal of Chemical Engineering, 7. S20-S25. ISSN 1932-2135

Shahla, S.; Ngoh, G.C.; Yusoff, R. (2012) The evaluation of various kinetic models for base-catalyzed ethanolysis of palm oil. Bioresource Technology, 104. pp. 1-5. ISSN 0960-8524

Shahriari, A.; Mokhlis, H.; Bakar, A.H.A. (2012) Critical reviews of Load flow methods for well, ill and unsolvable condition. Journal of Electrical Engineering-Elektrotechnicky Casopis, 63 (3). pp. 144-152. ISSN 1335-3632

Shahriari, A.; Mokhlis, H.; Bakar, A.H.A.; Karimi, M.; Aman, M.M. (2012) The non-divergence Newton-based Load Flow Method in ill conditioned system. International Journal of Scientific & Engineering Research, 3 (6). pp. 1-6. ISSN 2229-5518

Shahriari, A.; Mokhlis, H.; Bakar, A.H.A.; Karimi, M.; Illias, H.A. (2012) Application of state space search method to find a low voltage solution for ill-conditioned system. Przeglad Elektrotechniczny, 88 (12 A). pp. 247-250. ISSN 0033-2097

Shahriari, A.; Mokhlis, H.; Bakar, A.H.A.; Karimi, M.; Laghari, J.A.; Kazeminezad, M. (2012) The calculation of low voltage solution based on state space search method in ill-conditioned system. In: 2012 IEEE International Power Engineering and Optimization Conference, PEOCO 2012, 2012, Melaka.

Shamiri, A.; Hussain, M.A.; Mjalli, F.S.; Mostoufi, N. (2012) Improved single phase modeling of propylene polymerization in a fluidized bed reactor. Computers & Chemical Engineering, 36 (1). pp. 35-47. ISSN 0098-1354

Shamsudin, N.H.; Latiff, A.A.; Abas, N.; Mokhlis, H.; Awalin, L.J. (2012) Three phase fault algorithm in distribution system by using database approach and impedance based method. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Shee, Y.G.; Al-Mansoori, M.H.; Yaakob, S.; Man, A.; Zamzuri, A.K.; Adikan, F.R.M.; Mahdi, M.A. (2012) Millimeter wave carrier generation based on a double-Brillouin-frequency spaced fiber laser. Optics Express, 20 (12). pp. 13402-13408. ISSN 1094-4087

Shekarchian, M.; Moghavvemi, M.; Motasemi, F.; Mahlia, T.M.I. (2012) Cost benefit analysis and energy savings of using compression and absorption chillers for air conditioners in hot and humid climates. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011, 3 -4 October 2011, Melaka, Malaysia.

Shekarchian, M.; Moghavvemi, M.; Motasemi, F.; Zarifi, F.; Mahlia, T.M.I (2012) Energy and fuel consumption forecast by retrofitting absorption cooling in Malaysia from 2012 to 2025. Renewable and Sustainable Energy Reviews, 16 (8). 6128-6141. ISSN 13640321

Shekarchian, m.; Moghavvemi, M.; Rismanchi, B.; Mahlia, T.M.I.; Olofsson, T. (2012) The cost benefit analysis and potential emission reduction evaluation of applying wall insulation for buildings in Malaysia. Renewable and Sustainable Energy Reviews, 16 (7). pp. 4708-4718. ISSN 13640321

Shiman, F.; Molaei, F.; Oladazimi, M.; Abd Rashid, R.; Habil, H.; Ibrahim, F. (2012) Electro-acupuncture (EA) as an adjunct therapy to methadone maintenance treatment (MMT) in heroin addiction: a study of 2D EEG power spectral topography and Morlet wavelet. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Shiman, F.; Safavi, S.H.; Vaneghi, F.M.; Oladazimi, M.; Safari, M.J.; Ibrahim, F. (2012) EEG feature extraction using parametric and non-parametric models. In: IEEE-EMBS International Conference on Biomedical and Health Informatics, BHI 2012. In Conj. with the 8th Int. Symp.on Medical Devices and Biosensors and the 7th Int. Symp. on Biomedical and Health Engineering, 2012, Hong Kong and Shenzhen.

Sopyan, I.; Mardziah, C.M.; Ramesh, S. (2012) Fabrication of porous ceramic scaffolds via polymeric sponge method using sol-gel derived strontium doped hydroxyapatite. Applied Mechanics and Materials, 117-11. pp. 829-832. ISSN 3037852801

Sulaiman, A.; Harun, S.W.; Ahmad, F.; Arof, H.; Ahmad, H. (2012) Dual-wavelength laser generation using highly concentrated erbium-doped fibre coupling with microfibre knot resonator. Electronics Letters, 48 (5). ISSN 0013-5194

Sulaiman, A.; Harun, S.W.; Arof, H.; Ahmad, H. (2012) Compact and tunable Erbium-Doped fiber laser with microfiber Mach–Zehnder interferometer. IEEE Journal of Quantum Electronics, 48 (9). ISSN 0018-9197

Tajul Baharuddin, M.F.; Othman, A.R.; Taib, S.; Hashim, R.; Zainal Abidin, M.H.; Radzuan, M.A. (2012) Evaluating freshwater lens morphology affected by seawater intrusion using chemistry-resistivity integrated technique: a case study of two different land covers in Carey Island, Malaysia. Environmental Earth Sciences, 69. pp. 1-19. ISSN 18666280

Talib, D.N.A.; Bakar, A.H.A.; Mokhlis, H. (2012) Parameters affecting lightning backflash over pattern at 132kV double circuit transmission lines. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Tan, K.H.; Johan, M.R.; Ahmad, R.; Kadri, N.A.; Zain, N.M.; Arof, A.K. (2012) Mechanical analysis of the effects of different mechanical alloying periods on Ni3Al intermetallic compound fabrication quality. International Journal of Electrochemical Science, 7 (4). pp. 3765-3772. ISSN 1452-3981

Tan, S.J.; Harun, S.W.; Shahabuddin, N.S.; Arof, H.; Ahmad, H. (2012) Dual-cavity dual-output multi-wavelength fiber laser based on nonlinear polarization rotation effect. Laser Physics, 22 (10). pp. 1601-1605. ISSN 1054-660X

Tan, S.J.; Ismail, M.A.; Shahabuddin, N.S.; Ahmad, H.; Arof, H.; Harun, S.W. (2012) Effect of doped fiber length on the stretch pulses of a mode-locked erbium-doped fiber laser. Laser Physics, 22 (7). pp. 1240-1243. ISSN 1054-660X

Tarlochan, F.; Ramesh, S.; Harpreet, S. (2012) Advanced composite sandwich structure design for energy absorption applications: blast protection and crashworthiness. Composites Part B: Engineering, 48 (5). pp. 2198-2208. ISSN 1359-8368

Tee, D.C.; Kambayashi, T.; Sandoghchi, S.R.; Tamchek, N.; Adikan, F.R.M. (2012) Efficient, wide angle, structure tuned 1 x 3 photonic crystal power splitter at 1550 nm for triple play applications. Journal of Lightwave Technology, 30 (17). pp. 2818-2823. ISSN 0733-8724

Ting, H.N.; Chia, S.Y.; Manap, H.H.; Ho, A.H.; Tiu, K.Y.; Abdul Hamid, B. (2012) Fundamental frequency and perturbation measures of sustained vowels in Malaysian Malay children between 7 and 12 years old. The Journal of Voice. ISSN 0892-1997

Ting, H.N.; Zourmand, A.; Chia, S.Y.; Yong, B.F.; Abdul Hamid, B. (2012) Formant frequencies of Malay vowels produced by Malay children aged between 7 and 12 years. The Journal of Voice. ISSN 0892-1997

Uddin, M.A.; Jameel, M.; Razak, H.A.; Saiful Islam, A.B.M. (2012) Response prediction of offshore floating structure using artificial neural network. Advanced Science Letters, 14 (1). pp. 186-189. ISSN 19367317

Uddin, Md; Jameel, Mohammed; Sobuz, Habibur Rahman; Hasan, Noor Md; Islam, Md; Amanat, Khan Mahmud (2012) The effect of curing time on compressive strength of composite cement concrete. Applied Mechanics and Materials, 204. pp. 4105-4109. ISSN 3037854847

Usman, J.; McIntosh, A.S. (2012) Upper limb injury in rugby union football: results of a cohort study. British Journal of Sports Medicine. ISSN 1473-0480 (Electronic) 0306-3674 (Linking)

Vaneghi, F.M.; Oladazimi, M.; Shiman, F.; Kordi, A.; Safari, M.J.; Ibrahim, F. (2012) A comparative approach to ECG feature extraction methods. In: 3rd International Conference on Intelligent Systems Modelling and Simulation, ISMS 2012, 2012, Kota Kinabalu.

Wan, K.; Aziz, A.A.; Ab, S.; Zaaba, S.K.; Ibrahim, Z.; Yusof, Z.M.; Ibrahim, I.; Mukred, J.A.A.; Mokhtar, N. (2012) Probability distribution of arm trajectory for motion estimation and gesture recognition. Advanced Science Letters, 13 (1). pp. 534-539. ISSN 19366612

Wazed, M.A.; Ahmed, S.; Nukman, Y.; Ale Ebrahim, N. (2012) Models for component commonality in multistage production. Applied Mechanics and Materials, 110-11. pp. 258-266.

Wee, W.H.; Azhar Abdul Razak, M.; Kadri, N.A. (2012) Dielectrophoretic K562 cell entrapment device using benchtop microfluidics fabrication. Advanced Science Letters, 15 (1). pp. 1-4. ISSN 19366612 (ISSN)

Wee, W.H.; Razak, M.A.A.; Kadri, N.A. (2012) Electrochemical cell entrapment device for BioMEMS applications using benchtop fabrication techniques. International Journal of Electrochemical Science, 7. pp. 11588-11595.

Yafouz, B.; Kadri, N.A.; Ibrahim, F. (2012) The design and simulation of a planar microarray dot electrode for a dielectrophoretic lab-on-chip device. International Journal of Electrochemical Science, 7 (12). pp. 12054-12063. ISSN 1452-3981

Yafouz, B.; Kadri, N.A.; Ibrahim, F. (2012) A numerical analysis of electric field strength over planar microarray dot electrode for dielectrophoretic lab-on-chip device. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Yahya, S.; Moghavvemi, M.; Almurib, H.A.F. (2012) Geometrically bounded singularities and joint limits prevention of a three dimensional planar redundant manipulator using artificial neural networks. In: 8th International Conference on Emerging Intelligent Computing Technology and Applications, ICIC 2012, 25 - 29 July 2012, Huangshan, China.

Yahya, S.; Moghavvemi, M.; Almurib, H.A.F. (2012) Joint torque reduction of a three dimensional redundant planar manipulator. Sensors (Switzerland), 12 (6). pp. 6869-6892. ISSN 14248220

Yahya, S.; Moghavvemi, M.; Mohamed, H.A.F. (2012) Improvement of singularity avoidance for three dimensional planar manipulators by increasing their degrees of freedom. In: 2012 International Symposium on Computer, Consumer and Control, IS3C 2012, 4 - 6 June 2012, Taichung,Taiwan.

Yahya, S.; Moghavvemi, M.; Mohamed, H.A.F. (2012) Manipulability constraint locus for a six degrees of freedom redundant planar manipulator. In: 2012 International Symposium on Computer, Consumer and Control, IS3C 2012, 4 -6 June 2012, Taichung,Taiwan.

Yahya, S.; Moghavvemi, M.; Mohamed, H.A.F. (2012) Singularity avoidance of a six degree of freedom three dimensional redundant planar manipulator. Computers and Mathematics with Applications, 64 (5). pp. 856-868. ISSN 08981221

Yazid, H.; Arof, H.; Mohd Isa, H. (2012) Automated identification of exudates and optic disc based on inverse surface thresholding. Journal of Medical Systems, 36. pp. 1997-2004.

Yazid, H.; Arof, H.; Mohd Isa, H. (2012) Exudates segmentation using inverse surface adaptive thresholding. Measurement, 45. pp. 1599-1608. ISSN 0263-2241

Yazid, H.; Arof, H.; Yazid, H. (2012) Automated thresholding in radiographic image for welded joints. Nondestructive Testing and Evaluation, 27 (1). pp. 69-80. ISSN 1058-9759

YernChee, C.; Ching, Y.C.; Yaacob, I. (2012) Weathering resistance of solventborne polyurethane/nanosilica composite. Advanced Science Letters, 12 (1). pp. 165-169. ISSN 1936-6612

Yusof, F.; Yukio, M.; Yoshiharu, M.; Abdul Shukor, M.H. (2012) Effect of anodizing on pulsed Nd: YAG laser joining of polyethylene terephthalate (PET) and aluminium alloy (A5052). Materials & Design, 37. pp. 410-415. ISSN 0261-3069

Yusof, N.A.; Sapari, N.M.; Mokhlis, H.; Selvaraj, J. (2012) A comparative study of 5-level and 7-level multilevel inverter connected to the grid. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu.

Zalnezhad, E; Sarhan, Ahmed AD; Hamdi, M (2012) Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy. Materials Science and Engineering: A. ISSN 0921-5093

Zalnezhad, Erfan; Sarhan, Ahmed Aly Diaa Mohammed; Hamdi, Mohd (2012) Prediction of TiN coating adhesion strength on aerospace AL7075-T6 alloy using fuzzy rule based system. International Journal of Precision Engineering and Manufacturing, 13 (8). pp. 1453-1459. ISSN 1229-8557

Zargar, M.; Ahmadinia, E.; Asli, H.; Karim, M.R. (2012) Investigation of the possibility of using waste cooking oil as a rejuvenating agent for aged bitumen. Journal of Hazardous Materials, 233-23. pp. 254-258. ISSN 0304-3894

Zuhdi, A.S.M.; Ismail, M.D.; Undok, A.W.; Abidin, I.Z.; Naser, M.N.M.; Yaakob, Z.H.; Singh, R.; Singh, R.; Nordin, A.J.; Ahmad, W.A.W. (2012) Extracorporeal shockwave myocardial reperfusion (ESMR) therapy improves left ventricular dyssynchrony. Circulation, 125 (19). E747-E747.

This list was generated on Thu Nov 27 20:40:30 2014 MYT.