 | Up a level |
Zhou, Ding and Haseeb, A.S. Md. Abdul and Andriyana, Andri (2022) Mechanical performance of advanced multicomponent lead-free solder alloy under thermal aging. Materials Today Communications, 33. ISSN 2352-4928, DOI https://doi.org/10.1016/j.mtcomm.2022.104430.
Zamiri, Golnoush and Haseeb, A.S. Md. Abdul and Jagadish, Priyanka and Khalid, Mohammad and Kong, Ing and Krishnan, Syam G. (2022) Three-dimensional Graphene-TiO2-SnO2Ternary Nanocomposites for high-performance asymmetric supercapacitors. ACS Omega, 7 (48). 43981 -43991. ISSN 24701343, DOI https://doi.org/10.1021/acsomega.2c05343.
Zhou, Ding and Haseeb, A.S. Md. Abdul and Andriyana, Andri and Wong, Yew Hoong and Sabri, Mohd Faizul Mohd and Low, B.Y. and Pang, X.S. and Eu, Poh Leng and Tan, L.C. (2021) A parametric study of thermal stress and analysis of creep strain under thermal cyclic loading in a hybrid quad flat package. IEEE Transactions on Components, Packaging and Manufacturing Technology, 11 (3). pp. 435-443. ISSN 2156-3950, DOI https://doi.org/10.1109/TCPMT.2020.3046750.
Zahri, Nur Amirah Mohd and Yusof, Farazila and Miyashita, Yukio and Ariga, Tadashi and Haseeb, A.S. Md. Abdul and Jamadon, Nashrah Hani and Sukiman, Nazatul Liana (2020) Brazing of porous copper foam/copper with amorphous Cu-9.7Sn-5.7Ni-7.0P (wt%) filler metal: interfacial microstructure and diffusion behavior. Welding in the World, 64 (1). pp. 209-217. ISSN 0043-2288, DOI https://doi.org/10.1007/s40194-019-00804-2.
Zhou, Ding and Haseeb, A.S. Md. Abdul and Andriyana, Andri and Wong, Yew Hoong and Sabri, Mohd Faizul Mohd and Low, B.Y. and Pang, X.S. and Eu, P.L. and Tan, L.C. (2020) Performance of a hybrid fine pitch quad flat package mounted with a new flux on printed circuit board in surface insulation resistance test. Materialwissenschaft und Werkstofftechnik, 51 (10). pp. 1353-1363. ISSN 0933-5137, DOI https://doi.org/10.1002/mawe.202000064.
Quadir, M.Z. and Singh, Gurbinder and Rickard, W.D.A. and Haseeb, A.S. Md. Abdul (2020) Substructural phenomena in Cu wire bond after laser assisted manufacturing in electronic packaging. Materials Letters, 259. p. 126833. ISSN 0167-577X, DOI https://doi.org/10.1016/j.matlet.2019.126833.
Inderan, Vicinisvarri and Arafat, M.M. and Haseeb, A.S. Md. Abdul and Sudesh, Kumar and Lee, Hooi Ling (2019) A Comparative Study of Structural and Ethanol Gas Sensing Properties of Pure, Nickel and Palladium Doped SnO2 Nanorods Synthesised by the Hydrothermal Method. Journal of Physical Science, 30 (1). pp. 127-143. ISSN 1675-3402, DOI https://doi.org/10.21315/jps2019.30.1.10.
Tharsika, Thabothanayakam and Thanihaichelvan, Murugathas and Haseeb, A.S. Md. Abdul and Akbar, Sheikh Ali (2019) Highly Sensitive and Selective Ethanol Sensor Based on ZnO Nanorod on SnO2 Thin Film Fabricated by Spray Pyrolysis. Frontiers in Materials, 6. p. 122. ISSN 2296-8016, DOI https://doi.org/10.3389/fmats.2019.00122.
Singh, Gurbinder and Haseeb, A.S. Md. Abdul (2019) Influence of laser power on bonding strength for low purity copper wire bonding technology. Microelectronic Engineering, 211. pp. 1-4. ISSN 0167-9317, DOI https://doi.org/10.1016/j.mee.2019.03.018.
Zahri, Nur Amirah Mohd and Yusof, Farazila and Ariga, Tadashi and Haseeb, A.S. Md. Abdul and Mansoor, Muhammad Adil and Sukiman, Nazatul Liana (2019) Open-cell copper foam joining: joint strength and interfacial behaviour. Materials Science and Technology, 35 (16). pp. 2004-2012. ISSN 0267-0836, DOI https://doi.org/10.1080/02670836.2019.1661649.
Singh, Gurbinder and Haseeb, A.S. Md. Abdul (2018) Application of laser heating and its effects on bonding strengths for varied copper wire purity levels. Journal of Laser Applications, 30 (2). 022004. ISSN 1042-346X, DOI https://doi.org/10.2351/1.5008639.
Goh, Yingxin and Goh, Yi Sing and Lee, Ee Lynn and Ong, Meng Teck and Haseeb, A.S. Md. Abdul (2018) Formation and characterization of intermetallic compounds in electroplated cobalt–tin multilayers. Journal of Materials Science: Materials in Electronics, 29 (7). pp. 5791-5798. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-018-8550-1.
Bashir, Muhammad Nasir and Haseeb, A.S. Md. Abdul (2018) Improving mechanical and electrical properties of Cu/SAC305/Cu solder joints under electromigration by using Ni nanoparticles doped flux. Journal of Materials Science: Materials in Electronics, 29 (4). pp. 3182-3188. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-017-8252-0.
Fazal, M.A. and Suhaila, N.R. and Haseeb, A.S. Md. Abdul and Rubaiee, Saeed and Al-Zahrani, A. (2018) Influence of copper on the instability and corrosiveness of palm biodiesel and its blends: An assessment on biodiesel sustainability. Journal of Cleaner Production, 171. pp. 1407-1414. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2017.10.144.
Haseeb, A.S. Md. Abdul and Rahman, Abu Zayed Mohammad Saliqur and Chia, Pay Ying (2018) Nanoindentation creep on Cu3Sn, Cu6Sn5 and (Cu, Ni)6Sn5 intermetallic compounds grown in electrodeposited multilayered thin film. Journal of Materials Science: Materials in Electronics, 29 (2). pp. 1258-1263. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-017-8030-z.
Liyana, N.K. and Fazal, M.A. and Haseeb, A.S. Md. Abdul (2018) Polarization and EIS studies to evaluate the effect of aluminum concentration on the corrosion behavior of SAC105 solder alloy. Materials Science-Poland, 35 (4). pp. 694-701. ISSN 2083-1331, DOI https://doi.org/10.1515/msp-2017-0097.
Arafat, M.M. and Ong, Ji Yan and Haseeb, A.S. Md. Abdul (2018) Selectivity shifting behavior of Pd nanoparticles loaded zinc stannate/zinc oxide (Zn2SnO4/ZnO) nanowires sensors. Applied Surface Science, 435. pp. 928-936. ISSN 0169-4332, DOI https://doi.org/10.1016/j.apsusc.2017.10.211.
Fazal, M.A. and Suhaila, N.R. and Haseeb, A.S. Md. Abdul and Rubaiee, Saeed (2018) Sustainability of additive-doped biodiesel: Analysis of its aggressiveness toward metal corrosion. Journal of Cleaner Production, 181. pp. 508-516. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2018.01.248.
Fazal, M.A. and Jakeria, M.R. and Haseeb, A.S. Md. Abdul and Rubaiee, S. (2017) Effect of antioxidants on the stability and corrosiveness of palm biodiesel upon exposure of different metals. Energy, 135. pp. 220-226. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2017.06.128.
Goh, K.H. and Haseeb, A.S. Md. Abdul and Wong, Y.H. (2017) Lanthanide rare earth oxide thin film as an alternative gate oxide. Materials Science in Semiconductor Processing, 68. pp. 302-315. ISSN 1369-8001, DOI https://doi.org/10.1016/j.mssp.2017.06.037.
Quazi, M.M. and Fazal, M.A. and Haseeb, A.S. Md. Abdul and Yusof, F. and Masjuki, Haji Hassan and Arslan, A. (2017) Laser Composite Surfacing of Ni-WC Coating on AA5083 for Enhancing Tribomechanical Properties. Tribology Transactions, 60 (2). pp. 249-259. ISSN 1040-2004, DOI https://doi.org/10.1080/10402004.2016.1158891.
Goh, K.H. and Haseeb, A.S. Md. Abdul and Wong, Y.H. (2017) Structural characteristics of samarium oxynitride on silicon substrate. Journal of Alloys and Compounds, 722. pp. 729-739. ISSN 0925-8388, DOI https://doi.org/10.1016/j.jallcom.2017.06.179.
Bashir, M.N. and Haseeb, A.S. Md. Abdul and Rahman, A.Z.M.S. and Fazal, M.A. (2016) Effect of Cobalt Doping on the Microstructure and Tensile Properties of Lead Free Solder Joint Subjected to Electromigration. Journal of Materials Science and Technology, 32 (11). pp. 1129-1136. ISSN 1005-0302, DOI https://doi.org/10.1016/j.jmst.2016.09.007.
Goh, K.H. and Haseeb, A.S. Md. Abdul and Wong, Y.H. (2016) Effect of Oxidation Temperature on Physical and Electrical Properties of Sm2O3 Thin-Film Gate Oxide on Si Substrate. IEEE/TMS Journal of Electronic Materials, 45 (10). pp. 5302-5312. ISSN 0361-5235, DOI https://doi.org/10.1007/s11664-016-4694-z.
Singh, G. and Haseeb, A.S. Md. Abdul (2016) Effect of Pedestal Temperature on Bonding Strength and Deformation Characteristics for 5N Copper Wire Bonding. IEEE/TMS Journal of Electronic Materials, 45 (6). pp. 3244-3248. ISSN 0361-5235, DOI https://doi.org/10.1007/s11664-016-4403-y.
Fayeka, M. and Fazal, M.A. and Haseeb, A.S. Md. Abdul (2016) Effect of aluminum addition on the electrochemical corrosion behavior of Sn–3Ag–0.5Cu solder alloy in 3.5 wt% NaCl solution. Journal of Materials Science: Materials in Electronics, 27 (11). pp. 12193-12200. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-016-5374-8.
Quazi, M.M. and Fazal, M.A. and Haseeb, A.S. Md. Abdul and Yusof, F. and Masjuki, Haji Hassan and Arslan, A. (2016) Effect of rare earth elements and their oxides on tribo-mechanical performance of laser claddings: A review. Journal of Rare Earths, 34 (6). pp. 549-564. ISSN 1002-0721, DOI https://doi.org/10.1016/S1002-0721(16)60061-3.
Rahman, A.Z.M.S. and Haseeb, A.S. Md. Abdul and Xu, Q. and Evslin, J. and Cinausero, M. (2016) Laser excited novel near-infrared photoluminescence bands in fast neutron-irradiated MgO·nAl2O3. Radiation Physics and Chemistry, 125. pp. 122-126. ISSN 0969-806X, DOI https://doi.org/10.1016/j.radphyschem.2016.04.001.
Quazi, M.M. and Fazal, M.A. and Haseeb, A.S. Md. Abdul and Yusof, F. and Masjuki, Haji Hassan and Arslan, A. (2016) Laser-based Surface Modifications of Aluminum and its Alloys. Critical Reviews in Solid State and Materials Sciences, 41 (2). pp. 106-131. ISSN 1040-8436, DOI https://doi.org/10.1080/10408436.2015.1076716.
Goh, K.H. and Haseeb, A.S. Md. Abdul and Wong, Y.H. (2016) Physical and electrical properties of thermal oxidized Sm2O3 gate oxide thin film on Si substrate: Influence of oxidation durations. Thin Solid Films, 606. pp. 80-86. ISSN 0040-6090, DOI https://doi.org/10.1016/j.tsf.2016.03.051.
Chia, P.Y. and Haseeb, A.S. Md. Abdul and Mannan, S.H. (2016) Reactions in Electrodeposited Cu/Sn and Cu/Ni/Sn Nanoscale Multilayers for Interconnects. Materials, 9 (6). p. 430. ISSN 1996-1944, DOI https://doi.org/10.3390/ma9060430.
Sazzad, B.S. and Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2016) Retardation of oxidation and material degradation in biodiesel: a review. RSC Advances, 6 (65). pp. 60244-60263. ISSN 2046-2069, DOI https://doi.org/10.1039/C6RA10016C.
Leong, Y.M. and Haseeb, A.S. Md. Abdul (2016) Soldering Characteristics and Mechanical Properties of Sn-1.0Ag-0.5Cu Solder with Minor Aluminum Addition. Materials, 9 (7). p. 522. ISSN 1996-1944, DOI https://doi.org/10.3390/ma9070522.
Goh, Y. and Haseeb, A.S. Md. Abdul (2016) Studies on electrodeposition behavior of Sn–Bi alloys in plating baths modified by hydroquinone and gelatin. Journal of Materials Science, 51 (12). pp. 5823-5833. ISSN 0022-2461, DOI https://doi.org/10.1007/s10853-016-9883-x.
Rahman, A.M.S. and Chia, P.Y. and Haseeb, A.S. Md. Abdul (2015) Mechanical properties of intermetallic compounds in electrodeposited multilayered thin film at small scale by nanoindentation. Materials Letters, 147. pp. 50-53. ISSN 0167-577X, DOI https://doi.org/10.1016/j.matlet.2015.01.127.
Arafat, M.M. and Haseeb, A.S. Md. Abdul and Akbar, S.A. (2015) Growth and characterization of the oxide scales and core/shell nanowires on Ti-6Al-4 V particles during thermal oxidation. Ceramics International, 41 (3). pp. 4401-4409. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2014.11.130.
Tharsika, T. and Haseeb, A.S. Md. Abdul and Akbar, S.A. and Thanihaichelvan, M. (2015) Tailoring ZnO nanostructures by spray pyrolysis and thermal annealing. Ceramics International, 41 (3). pp. 5205-5211. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2014.12.062.
Tharsika, T. and Haseeb, A.S. Md. Abdul and Akbar, S.A. and Sabri, M.F.M. and Wong, Y.H. (2015) Gas sensing properties of zinc stannate (Zn2SnO4) nanowires prepared by carbon assisted thermal evaporation process. Journal of Alloys and Compounds, 618. pp. 455-462. ISSN 0925-8388, DOI https://doi.org/10.1016/j.jallcom.2014.08.192.
Tharsika, T. and Haseeb, A.S. Md. Abdul and Akbar, S.A. and Sabri, M.F.M. and Wong, Y.H. (2015) Gas sensing properties of zinc stannate (Zn2SnO4) nanowires prepared by carbon, assisted thermal evaporation process. Journal of Alloys and Compounds, 618. pp. 455-462. ISSN 0925-8388, DOI https://doi.org/10.1016/j.jallcom.2014.08.192.
Chia, P.Y. and Haseeb, A.S. Md. Abdul (2015) Intermixing reactions in electrodeposited Cu/Sn and Cu/Ni/Sn multilayer interconnects during room temperature and high temperature aging. Journal of Materials Science: Materials in Electronics, 26 (1). pp. 294-299. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-014-2398-9.
Goh, Y. and Haseeb, A.S. Md. Abdul and Liew, H.L. and Sabri, M.F.M. (2015) Deformation and fracture behaviour of electroplated Sn–Bi/Cu solder joints. Journal of Materials Science, 50 (12). pp. 4258-4269. ISSN 0361-5235, DOI https://doi.org/10.1007/s10853-015-8978-0.
Chew, C.S. and Durairaj, R. and Haseeb, A.S. Md. Abdul and Beake, B. (2015) Mechanical properties of interfacial phases between Sn-3.5 Ag solder and Ni-18 at. W barrier film by nanoindentation. Soldering & Surface Mount Technology, 27 (2). pp. 90-94. ISSN 0954-0911, DOI https://doi.org/10.1108/Ssmt-01-2015-0001.
Tharsika, T. and Haseeb, A.S. Md. Abdul and Akbar, S.A. and Sabri, M.F.M. (2014) Catalyst free single-step fabrication of SnO2/ZnO core–shell nanostructures. Ceramics International, 40 (5). pp. 7601-7605. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2013.11.124.
Tharsika, T. and Haseeb, A.S. Md. Abdul and Akbar, S.A. and Sabri, M.F.M. and Wong, Y.H. (2014) Enhanced Ethanol Gas Sensing Properties of SnO2-Core/ZnO-Shell Nanostructures. Sensors, 14 (8). pp. 14586-14600. ISSN 1424-8220, DOI https://doi.org/10.3390/s140814586.
Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2013) Investigation of friction and wear characteristics of palm biodiesel. Energy Conversion and Management, 67. pp. 251-256. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2012.12.002.
Goh, Y. and Haseeb, A.S. Md. Abdul and Sabri, Mohd Faizul Mohd (2013) Effects of hydroquinone and gelatin on the electrodeposition of Sn–Bi low temperature Pb-free solder. Electrochimica Acta, 90. pp. 265-273. ISSN 0013-4686, DOI https://doi.org/10.1016/j.electacta.2012.12.036.
Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2013) Corrosion mechanism of copper in palm biodiesel. Corrosion Science, 67. pp. 50-59. ISSN 0010-938X, DOI https://doi.org/10.1016/j.corsci.2012.10.006.
Tay, S.L. and Haseeb, A.S. Md. Abdul and Johan, M.R. and Munroe, P.R. and Quadir, M.Z. (2013) Influence of Ni nanoparticle on the morphology and growth of interfacial intermetallic compounds between Sn–3.8Ag–0.7Cu lead-free solder and copper substrate. Intermetallics, 33. pp. 8-15. ISSN 0966-9795, DOI https://doi.org/10.1016/j.intermet.2012.09.016.
Liza, S. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Abbas, A.A. (2013) The Wear Behavior of Cross-Linked UHMWPE under Dry and Bovine Calf Serum–Lubricated Conditions. Tribology Transactions, 56 (1). pp. 130-140. ISSN 0569-8197, DOI https://doi.org/10.1080/10402004.2012.732199.
Krishnan, S. and Haseeb, A.S. Md. Abdul and Johan, Mohd Rafie (2013) Synthesis and growth kinetics of spindly CuO nanocrystals via pulsed wire explosion in liquid medium. Journal of Nanoparticle Research, 15 (1410). pp. 1-9. ISSN 1388-0764, DOI https://doi.org/10.1007/s11051-012-1410-7.
Goh, Y. and Haseeb, A.S. Md. Abdul and Sabri, M.F.M. (2013) Electrodeposition of lead‐free solder alloys. Soldering & Surface Mount Technology, 25 (2). pp. 76-90. ISSN 0954-0911, DOI https://doi.org/10.1108/09540911311309031.
Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2012) Degradation of automotive materials in palm biodiesel. Energy, 40 (1). pp. 76-83. ISSN 0360-5442,
Haque, A. and Lim, B.H. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2012) Die attach properties of Zn-Al-Mg-Ga based high-temperature lead-free solder on Cu lead-frame. Journal of Materials Science: Materials in Electronics, 23 (1). pp. 115-123. ISSN 0957-4522,
Nadia, A. and Haseeb, A.S. Md. Abdul (2012) Effects of addition of copper particles of different size to Sn-3.5Ag solder. Journal of Materials Science: Materials in Electronics, 23 (1). pp. 86-93. ISSN 0957-4522,
Arafat, M.M. and Dinan, B. and Akbar, S.A. and Haseeb, A.S. Md. Abdul (2012) Gas sensors based on one dimensional nanostructured metal-oxides: a review. Sensors, 12. pp. 7207-7258. ISSN 1424-8220, DOI https://doi.org/10.3390/s120607207.
Armstrong, D.E.J. and Haseeb, A.S. Md. Abdul and Roberts, S.G. and Wilkinson, A.J. and Bade, K. (2012) Nanoindentation and micro-mechanical fracture toughness of electrodeposited nanocrystalline Ni-W alloy films. Thin Solid Films, 520 (13). pp. 4369-4372. ISSN 0040-6090,
Krishnan, S. and Haseeb, A.S. Md. Abdul and Johan, M.R. (2012) Preparation and low-temperature sintering of cu nanoparticles for high-power devices. IEEE Transactions on Components, Packaging, and Manufacturing Technology, 2 (4). pp. 587-592. ISSN 2156-3950,
Haseeb, A.S. Md. Abdul and Arafat, M.M. and Johan, M.R. (2012) Stability of molybdenum nanoparticles in Sn-3.8Ag-0.7Cu solder during multiple reflow and their influence on interfacial intermetallic compounds. Materials Characterization, 64. pp. 27-35. ISSN 1044-5803,
Tay, S.L. and Haseeb, A.S. Md. Abdul and Johan, M.R. (2011) Addition of cobalt nanoparticles into Sn-3.8Ag-0.7Cu lead-free solder by paste mixing. Soldering & Surface Mount Technology, 23 (1). pp. 10-14. ISSN 0954-0911,
Haseeb, A.S. Md. Abdul and Jun, T.S. and Fazal, M.A. and Masjuki, Haji Hassan (2011) Degradation of physical properties of different elastomers upon exposure to palm biodiesel. Energy, 36 (3). pp. 1814-1819.
Chai, A.B. and Andriyana, A. and Verron, E. and Johan, M.R. and Haseeb, A.S. Md. Abdul (2011) Development of a compression test device for investigating interaction between diffusion of biodiesel and large deformation in rubber. Polymer Testing, 30 (8). pp. 867-875. ISSN 0142-9418,
Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2011) Effect of different corrosion inhibitors on the corrosion of cast iron in palm biodiesel. Fuel Processing Technology, 92 (11). pp. 2154-2159. ISSN 0378-3820,
Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2011) Effect of temperature on the corrosion behavior of mild steel upon exposure to palm biodiesel. Energy, 36 (5). pp. 3328-3334. ISSN 0360-5442,
Haseeb, A.S. Md. Abdul and Leng, T.S. (2011) Effects of Co nanoparticle addition to Sn-3.8Ag-0.7Cu solder on interfacial structure after reflow and ageing. Intermetallics, 19 (5). pp. 707-712. ISSN 0966-9795,
Liza, S. and Haseeb, A.S. Md. Abdul and Abbas, A.A. and Masjuki, Haji Hassan (2011) Failure analysis of retrieved UHMWPE tibial insert in total knee replacement. Engineering Failure Analysis, 18 (6). pp. 1415-1423. ISSN 1350-6307,
Haseeb, A.S. Md. Abdul (2011) Implementation of micro-level problem based learning in a course on electronic materials. Journal of Materials Education, 33 (5-6). pp. 273-282. ISSN 0738-7989,
Arafat, M.M. and Haseeb, A.S. Md. Abdul and Johan, M.R. (2011) Interfacial reaction and dissolution behavior of Cu substrate in molten Sn-3.8Ag-0.7Cu in the presence of Mo nanoparticles. Soldering & Surface Mount Technology, 23 (3). pp. 140-149. ISSN 0954-0911,
Haseeb, A.S. Md. Abdul and Chew, C.S. and Johan, M.R. (2011) Interfacial reactions between Sn-3.5 Ag solder and Ni-W alloy films. Journal of Materials Science: Materials in Electronics, 22 (9). pp. 1372-1377. ISSN 0957-4522,
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2011) Intermixing of metal oxide/Ag/metal oxide nanoscale multilayers prepared by rf reactive magnetron sputtering. Surface Engineering, 27 (5). pp. 382-388. ISSN 0267-0844, DOI https://doi.org/10.1179/1743294410Y.0000000014.
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, Rahman (2010) Adhesion and wear behavior of nanostructured titanium oxide thin films. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 5-10. ISSN 1823-0334,
Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2010) Comparative corrosive characteristics of petroleum diesel and palm biodiesel for automotive materials. Fuel Processing Technology, 91 (10). pp. 1308-1315.
Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Siang, C.T. and Fazal, M.A. (2010) Compatibility of elastomers in palm biodiesel. Renewable Energy, 35 (10). pp. 2356-2361. ISSN 0960-1481,
Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Ann, L.J. and Fazal, M.A. (2010) Corrosion characteristics of copper and leaded bronze in palm biodiesel. Fuel Processing Technology, 91 (3). pp. 329-334. ISSN 0378-3820,
Haseeb, A.S. Md. Abdul and Sia, S.Y. and Fazal, M.A. and Masjuki, Haji Hassan (2010) Effect of temperature on tribological properties of palm biodiesel. Energy, 35 (3). pp. 1460-1464. ISSN 0360-5442,
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Abd Shukor, Mohd Hamdi (2010) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO2 thin films. Optical Materials, 32 (6). pp. 690-695. ISSN 0925-3467, DOI https://doi.org/10.1016/j.optmat.2009.07.011.
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, Rahman and Abd Shukor, Mohd Hamdi (2010) Influence of substrate temperatures on structural, morphological and optical properties of RF-sputtered anatase Tio 2 films. Arabian Journal for Science and Engineering, 35 (1 C). pp. 147-156. ISSN 1319-8025,
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, R. and Hamdi, M. (2010) Influence of substrate temperatures on structural, morphological and optical properties of rf-sputtered anatase TiO2 films. Arabian Journal for Science and Engineering, 35 (1C). pp. 147-156. ISSN 1319-8025,
Kow, S.T. and Yap, Y. and Pua, C.H. and Chong, W.Y. and Law, A.W.P. and Adikan, Faisal Rafiq Mahamd and Haseeb, A.S. Md. Abdul and Ahmad, Harith (2010) Selective area rare-earth doping of planar glass samples for monolithic integration of optically passive and active waveguides. Optik, 121 (8). pp. 722-725. ISSN 0030-4026, DOI https://doi.org/10.1016/j.ijleo.2008.11.003.
Haseeb, A.S. Md. Abdul and Hasan, M.M. and Masjuki, Haji Hassan (2010) Structural and mechanical properties of nanostructured TiO2 thin films deposited by RF sputtering. Surface and Coatings Technology, 205 (2). pp. 338-344. ISSN 0257-8972, DOI https://doi.org/10.1016/j.surfcoat.2010.06.058.
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan (2009) Effects of annealing treatment on optical properties of anatase TiO 2 thin films. World Academy of Science, Engineering and Technology, 40. pp. 221-225. ISSN 2010-376X,
Leong, W.C. and Tho, S.Y. and Law, A.W.P. and Chong, W.Y. and Pua, C.H. and Ahmad, Harith and Haseeb, A.S. Md. Abdul and Adikan, Faisal Rafiq Mahamd (2009) Spreading profile of dopant solution on pre-sintered silica layers for selective area doping of integrated optic planar glass samples. Thin Solid Films, 518 (1). pp. 378-382. ISSN 0040-6090, DOI https://doi.org/10.1016/j.tsf.2009.06.060.
Klimenkov, Michael and Haseeb, A.S. Md. Abdul and Bade, Klaus (2009) Structural investigations on nanocrystalline Ni-W alloy films by transmission electron microscopy. Thin Solid Films, 517 (24). pp. 6593-6598. ISSN 0040-6090, DOI https://doi.org/10.1016/j.tsf.2009.04.039.
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Johan, Mohd Rafie (2009) Structural, optical and morphological properties of TiO2/Ag/TiO2 multilayer films. AIP Conference Proceedings, 1136 (1). pp. 229-233. ISSN 0094-243X,
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Hamdi, M. (2009) Synthesis and annealing of nanostructured TiO2 films by radio-frequency magnetron sputtering. Journal of Applied Sciences, 9 (15). pp. 2815-2821. ISSN 1812-5654, DOI https://doi.org/10.3923/jas.2009.2815.2821.
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan (2008) Effects of annealing treatment on optical properties of anatase TiO2 thin films. International Journal of Chemical and Biological Engineering, 1. pp. 1-5. ISSN 2010-3867,
Saidur, Rahman and Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2008) Energy-efficient optical coating for flat glass. Journal of Applied Sciences, 8 (10). pp. 1883-1890. ISSN 1812-5654,
Haseeb, A.S. Md. Abdul and Albers, U. and Bade, Klaus (2008) Friction and wear characteristics of electrodeposited nanocrystalline nickel-tungsten alloy films. Wear, 264 (1-2). pp. 106-112. ISSN 0043-1648, DOI https://doi.org/10.1016/j.wear.2007.02.004.
Haseeb, A.S. Md. Abdul and Bade, Klaus (2008) LIGA fabrication of nanocrystalline Ni–W alloy micro specimens from ammonia-citrate bath. Microsystem Technologies, 14 (3). pp. 379-388. ISSN 0946-7076, DOI https://doi.org/10.1007/s00542-007-0447-5.
Naher, Sumsun and Haseeb, A.S. Md. Abdul (2008) Production and purification of zircon opacifier from zircon found in the coastal area of Bangladesh. Journal of Materials Processing Technology, 205 (1-3). pp. 203-206. ISSN 0924-0136, DOI https://doi.org/10.1016/j.jmatprotec.2007.05.063.
Haj-Taieb, M. and Haseeb, A.S. Md. Abdul and Caulfield, J. and Bade, Klaus and Aktaa, J. and Hemker, K.J. (2008) Thermal stability of electrodeposited LIGA Ni-W alloys for high temperature MEMS applications. Microsystem Technologies, 14 (9-11). pp. 1531-1536. ISSN 0946-7076, DOI https://doi.org/10.1007/s00542-007-0536-5.
Ahmed, Shafaat and Haseeb, A.S. Md. Abdul and Kurny, A.S.W. (2007) Study of the wear behaviour of Al–4.5% Cu–3.4% Fe in situ composite: Effect of thermal and mechanical processing. Journal of Materials Processing Technology, 182 (1-3). pp. 327-332. ISSN 0924-0136, DOI https://doi.org/10.1016/j.jmatprotec.2006.08.009.
Shorowordi, Kazi Md and Haseeb, A.S. Md. Abdul and Celis, Jean Pierre (2006) Chemical and structural nature of tribo-surface of aluminium-SiC composites at nanometre and micrometre length scales. Materials Science and Engineering: A, 425 (1-2). pp. 213-218. ISSN 0921-5093, DOI https://doi.org/10.1016/j.msea.2006.03.058.
Haseeb, A.S. Md. Abdul (2006) Modeling of the effects of athermal flow strength and activation energy for dislocation glide an the nanoindentation creep of nickel thin film at room temperature. Computational Materials Science, 37 (3). pp. 278-283. ISSN 0927-0256, DOI https://doi.org/10.1016/j.commatsci.2005.07.006.
Shorowordi, Kazi Md and Haseeb, A.S. Md. Abdul and Celis, Jean Pierre (2006) Tribo-surface characteristics of Al-B4C and Al-SiC composites worn under different contact pressures. Wear, 261 (5-6). pp. 634-641. ISSN 0043-1648, DOI https://doi.org/10.1016/j.wear.2006.01.023.
Naher, Sumsun and Haseeb, A.S. Md. Abdul (2006) A technical note on the production of zirconia and zircon brick from locally available zircon in Bangladesh. Journal of Materials Processing Technology, 172 (3). pp. 388-393. ISSN 0924-0136, DOI https://doi.org/10.1016/j.jmatprotec.2005.10.013.
Morshed, Muhammad Monzur and Haseeb, A.S. Md. Abdul (2004) Physical and chemical characteristics of commercially available brake shoe lining materials: a comparative study. Journal of Materials Processing Technology, 155. pp. 1422-1427. ISSN 0924-0136, DOI https://doi.org/10.1016/j.jmatprotec.2004.04.232.
Haseeb, A.S. Md. Abdul and Celis, Jean Pierre and Roos, Jozef R. (2003) Fretting wear of metallic multilayer films. Thin Solid Films, 444 (1-2). pp. 199-207. ISSN 0040-6090, DOI https://doi.org/10.1016/S0040-6090(03)01089-7.
Shorowordi, Kazi Md and Laoui, Tahar and Haseeb, A.S. Md. Abdul and Celis, Jean Pierre and Froyen, Ludo (2003) Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: a comparative study. Journal of Materials Processing Technology, 142 (3). pp. 738-743. ISSN 0924-0136, DOI https://doi.org/10.1016/S0924-0136(03)00815-X.
Haseeb, A.S. Md. Abdul and Hayashi, Y. and Masuda, M. and Arita, M. (2003) Study on the nature of the electrochemically synthesized hard Fe-15.4 mass Ni-0.70 mass C alloy film. Journal of Materials Research, 18 (4). pp. 840-847. ISSN 0884-2914, DOI https://doi.org/10.1557/JMR.2003.0115.
Ahsan, Q. and Haseeb, A.S. Md. Abdul and Haque, E. and Celis, Jean Pierre (2003) Wear failure of a leaded bronze bearing: correlation between plant experience and laboratory wear test data. Journal of Materials Engineering and Performance, 12 (3). pp. 304-311. ISSN 1059-9495, DOI https://doi.org/10.1361/105994903770343150.
Haseeb, A.S. Md. Abdul and Hayashi, Y. and Masuda, M. and Arita, M. (2002) On the nature of the electrochemically synthesized hard Fe-0.96 mass pct C alloy film. Metallurgical and Materials Transactions B, 33 (6). pp. 921-927. ISSN 1073-5615, DOI https://doi.org/10.1007/s11663-002-0076-4.
Alam, Md. Ohidul and Haseeb, A.S. Md. Abdul (2002) Response of Ti-6Al-4V and Ti-24Al-11Nb alloys to dry sliding wear against hardened steel. Tribology International, 35 (6). pp. 357-362. ISSN 0301-679X, DOI https://doi.org/10.1016/S0301-679X(02)00015-4.
Bolzan, A.E. and Haseeb, A.S. Md. Abdul and Schilardi, P.L. and Piatti, Roberto C.V. and Salvarezza, Roberto Carlos and Arvia, Alejandro Jorge (2001) Anodisation of copper in thiourea- and formamidine disulphide-containing acid solution. part I. identification of products and reaction pathway. Journal of Electroanalytical Chemistry, 500 (1-2). pp. 533-542. ISSN 0022-0728, DOI https://doi.org/10.1016/S0022-0728(00)00217-5.
Haseeb, A.S. Md. Abdul and Schilardi, P.L. and Bolzan, A.E. and Piatti, R.C.V. and Salvarezza, R.C. and Arvia, A.J. (2001) Anodisation of copper in thiourea-containing acid solution - part II. in situ transversal imaging observations. kinetics of anodic film growth. Journal of Electroanalytical Chemistry, 500 (1-2). pp. 543-553. ISSN 0022-0728, DOI https://doi.org/10.1016/S0022-0728(00)00216-3.
Haseeb, A.S. Md. Abdul and Nishida, Tetsuaki and Masuda, Masataka and Hayashi, Yukio (2001) Mössbauer investigation on electrodeposited Fe-C and Fe-Ni-C alloys. Scripta Materialia, 44 (3). pp. 519-523. ISSN 1359-6462, DOI https://doi.org/10.1016/S1359-6462(00)00629-1.
Haseeb, A.S. Md. Abdul and Arita, M. and Hayashi, Y. (2001) Thermal decomposition study of electrodeposited Fe-C and Fe-Ni-C alloys by differential scanning calorimetry. Journal of Materials Science, 36 (19). pp. 4739-4743. ISSN 0022-2461, DOI https://doi.org/10.1023/A:1017931106376.
Maleque, Md Abdul and Masjuki, Haji Hassan and Haseeb, A.S. Md. Abdul (2000) Effect of mechanical factors on tribological properties of palm oil methyl ester blended lubricant. Wear, 239 (1). pp. 117-125. ISSN 0043-1648, DOI https://doi.org/10.1016/S0043-1648(00)00319-7.
Haseeb, A.S. Md. Abdul and Islam, Md. Aminul and Bepari, Md. Mohar Ali (2000) Tribological behaviour of quenched and tempered, and austempered ductile iron at the same hardness level. Wear, 244 (1-2). pp. 15-19. ISSN 0043-1648, DOI https://doi.org/10.1016/S0043-1648(00)00404-X.
Tharsika, Thabothanayakam and Haseeb, A.S. Md. Abdul and Mohd Faizul, M.S. (2013) Fabrication and characterization of ZnO-Sn02 mixed nanostructures. In: 1st International Conference on the Science & Engineering of Materials, 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.
Mahdavifard, M.H. and Haseeb, A.S. Md. Abdul and Arafat, M.M. (2013) Reflow of Sn-3.8Ag-O.7Cu solder on Ni substrate in presence of Mo nanoparticles. In: 1st International Conference on the Science & Engineering of Materials, 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.
Jakeria, M.R. and Fazal, M.A. and Haseeb, A.S. Md. Abdul (2013) Influence of copper and mild steel on stability of palm biodiesel. In: 1st International Conference on the Science & Engineering of Materials, 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.
Tay, S.L. and Haseeb, A.S. Md. Abdul and Johan, Mohd Rafie (2010) Effect of addition cobalt nanoparticles on Sn-Ag-Cu lead-free solder. In: Electronics Packaging Technology Conference, 9-10 December 2010, Singapore.
Haque, A. and Won, Y.S. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2010) Investigations on Zn-Al-Ge alloys as high temperature die attach material. In: Electronics System Integration Technologies Conference, 13-16 September 2010, Berlin, Germany.
