Items where Division is "Faculty of Engineering" and Year is 2011

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Y
Number of items: 345.

A

Ab Karim, Mohd Sayuti; Aly Diaa Mohammed Sarhan, Ahmed; Hamdi Abd Shukor, Mohd (2011) Experimental study on minimizing edge chipping in glass milling operation using an internal CBN grinding tool. Materials and Manufacturing Processes, 26 (8). pp. 969-976. ISSN 1042-6914

Abd Razak, N.A.; Abu Osman, N.A.; Wan Abas, W.A.B.; Ahmad Fu'ad, A.N. (2011) Comparison study of the transradial prosthetics and biological hand using motion analysis approach. In: International MultiConference of Engineers and Computer Scientists 2011, IMECS 2011, 2011, Kowloon.

Abdelaziz, E.A.; Saidur, R.; Mekhilef, S. (2011) A review on energy saving strategies in industrial sector. Renewable and Sustainable Energy Reviews, 15 (1). pp. 150-168. ISSN 1364-0321

Abdul Rahim, H.; Taib, M.N.; Ibrahim, F.; Abdul Rahim, Z. (2011) Bioelectrical impedance analysis device: measurement of bioelectrical tissue conductivity in dengue patients. Sensors and Transducers, 125 (2). pp. 256-265. ISSN 17265479 (ISSN)

Aboodarda, S.J.; Shariff, M.A.H.; Muhamed, A.M.C.; Ibrahim, F.; Yusof, A. (2011) Electromyographic activity and applied load during high intensity elastic resistance and nautilus machine exercises. Journal of Human Kinetics, 30 (1). pp. 5-12. ISSN 1640-5544

Aboodarda, S.J.; Yusof, A.; Abu Osman, N.A.; Ibrahim, F. (2011) Two practical strategies for developing resultant muscle torque production using elastic resistance device. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Abu Bakar, M.H.; Sheih, S.J.; Adikan, F.R.M.; Mahdi, M.A. (2011) Variable gain-flattened L-band erbium-doped fiber amplifier. Laser Physics, 21 (9). pp. 1638-1644. ISSN 1054-660X

Adzila, S.; Sopyan, I.; Hamdi, M.; Ramesh, S. (2011) Mechanochemical synthesis of nanosized hydroxyapatite powder and its conversion to dense bodies. Materials Science Forum, 694 . Engineering, pp. 118-122.

Aghamohammadi, N.; Sulaiman, N.M.N.; Aroua, M.K. (2011) Combustion characteristics of biomass in SouthEast Asia. Biomass & Bioenergy, 35 (9). 3884-3890 . ISSN 0961-9534

Ahamed, J.U.; Saidur, R.; Masjuki, H.H. (2011) Prospect of hydrocarbon uses based on exergy analysis in the vapor compression refrigeration system. In: 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011, 2011, Kuala Lumpur.

Ahamed, J.U.; Saidur, R.; Masjuki, H.H. (2011) A review on exergy analysis of vapor compression refrigeration system. Renewable and Sustainable Energy Reviews, 15 (3). pp. 1593-1600. ISSN 1364-0321

Ahamed, J.U.; Saidur, R.; Masjuki, H.H.; Mekhilef, S.; Ali, M.B.; Furqon, M.H. (2011) An application of energy and exergy analysis in agricultural sector of Malaysia. Energy Policy, 39 (12). pp. 7922-7929. ISSN 0301-4215

Ahmadinia, E.; Zargar, M.; Karim, M.R.; Abdelaziz, M.; Shafigh, P. (2011) Using waste plastic bottles as additive for stone mastic asphalt. Materials & Design, 32 (10). pp. 4844-4849. ISSN 0261-3069

Ahmady, A.; Hashim, M.A.; Aroua, M.K. (2011) Absorption of carbon dioxide in the aqueous mixtures of methyldiethanolamine with three types of imidazolium-based ionic liquids. Fluid Phase Equilibria, 309 (1). pp. 76-82. ISSN 0378-3812

Ahmady, A.; Hashim, M.A.; Aroua, M.K. (2011) Density, viscosity, physical solubility and diffusivity of CO 2 in aqueous MDEA+bmimBF 4 solutions from 303 to 333K. Chemical Engineering Journal, 172 (2-3). pp. 763-770. ISSN 1385-8947

Al-Asadi, H.A.; Bakar, A.A.A.; Adikan, F.R.M.; Mahdi, M.A. (2011) Analytical study of nonlinear phase shift through stimulated Brillouin scattering in single mode fiber with the pump power recycling technique. Journal of Optics, 13 (10). ISSN 2040-8978

Al-Zuhair, S.; Ramachandran, K.B.; Farid, M.; Aroua, M.K.; Vadlani, P.; Ramakrishnan, S.; Gardossi, L. (2011) Enzymes in biofuels production. Enzyme Research, 2011 (1). p. 658263. ISSN 2090-0414

Ale Ebrahim, N.; Abdul Rashid, S.H.; Ahmed, S.; Taha, Z. (2011) The effectiveness of virtual R&D teams in SMEs: experiences of Malaysian SMEs. Industrial Engineering and Management Systems, 10 (2). pp. 109-114. ISSN 1598-7248

Ale Ebrahim, N.; Ahmed, S.; Abdul Rashid, S.H.; Taha, Z. (2011) Virtual collaborative R&D teams in Malaysia manufacturing SMEs. In: 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011), February 26-28, Hotel Royal, Singapore.

Alengaram, U.J.; Mahmud, H.; Jumaat, M.Z. (2011) Enhancement and prediction of modulus of elasticity of palm kernel shell concrete. Materials & Design, 32 (4). pp. 2143-2148. ISSN 0261-3069

Ali, M.B.; Saidur, R.; Hossain, M.S. (2011) A review on emission analysis in cement industries. Renewable and Sustainable Energy Reviews, 15 (5). pp. 2252-2261. ISSN 1364-0321

Alias, A.; Rahim, N.A.; Hussain, M.A. (2011) Bidirectional three phase power converter. In: 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011, 2011, Kuala Lumpur.

Almurib, H.A.F.; Askari, M.; Moghavvemi, M. (2011) Model predictive control of quadruple tanks system. In: 50th Annual Conference on Society of Instrument and Control Engineers, SICE 2011, 13 - 18 September 2011, Tokyo,Japan.

Almurib, H.A.F.; Hassan, L.H.; Moghavvemi, M. (2011) Design of robust power system stabilizers for Iraqi power network. In: 50th Annual Conference on Society of Instrument and Control Engineers, SICE 2011, 13 - 18 September 2011, Tokyo, Japan.

Amiri-Khorasani, M.; Abu Osman, N.A.; Yusof, A. (2011) Acute effect of static and dynamic stretching on hip dynamic range of motion during instep kicking in professional soccer players. Journal of Strength and Conditioning Research, 25 (6). pp. 1647-1652. ISSN 1064-8011

Amiri-Khorasani, M.; Abu Osman, N.A.; Yusof, A. (2011) Biomechanical responses of thigh and lower leg during 10 consecutive soccer instep kicks. Journal of Strength and Conditioning Research, 25 (4). pp. 1177-1181. ISSN 1064-8011

Amiriyan, M.; Singh, R.; Sopyan, I.; Satgunam, M.; Tolouei, R.; Dung, T.W. (2011) Pressureless sintering of electro-conductive zirconia composites. Materials Science Forum, 694 . Engineering, pp. 304-308.

An, J.; Kim, J.Y.; Kim, K.W.; Park, J.Y.; Lee, J.S.; Jang, M. (2011) Natural attenuation of arsenic in the wetland system around abandoned mining area. Environmental Geochemistry and Health, 33 (SUPPL.). pp. 71-80. ISSN 0269-4042

Arafat, M.M.; Haseeb, A.S M.A.; Johan, M.R. (2011) Interfacial reaction and dissolution behavior of Cu substrate in molten Sn-3.8Ag-0.7Cu in the presence of Mo nanoparticles. Soldering & Surface Mount Technology, 23 (3). pp. 140-149. ISSN 0954-0911

Atabani, A.E.; Rahman, S.; Silitonga, A.S.; Sebayang, A.H. (2011) Energy Economical and Environmental Analysis of Industrial Boilers Using Fuel Switching. International Journal on Advanced Science, Engineering and Information Technology, 1 (5). pp. 501-506. ISSN 978-983-42366-4-9

Atadashi, I.M.; Aroua, M.K.; Aziz, A.A. (2011) Biodiesel separation and purification: A review. Renewable Energy, 36 (2). pp. 437-443. ISSN 0960-1481

Atadashi, I.M.; Aroua, M.K.; Aziz, A.R.A.; Sulaiman, N.M.N. (2011) Membrane biodiesel production and refining technology: a critical review. Renewable & Sustainable Energy Reviews, 15 (9). pp. 5051-5062.

Atadashi, I.M.; Aroua, M.K.; Aziz, A.R.A.; Sulaiman, N.M.N. (2011) Refining technologies for the purification of crude biodiesel. Applied Energy, 88 (12). pp. 4239-4251. ISSN 0306-2619

Ayat, F.L.; Moghavvemi, M.; Attaran, A. (2011) Thickness effect of micro speaker copper coil fabrication process. Sensors and Transducers, 130 (7). pp. 127-135. ISSN 17265479

B

Bani Hashim, A.Y.; Abu Osman, N.A.; Wan Abas, W.A.B.; Abdul Latif, L. (2011) Approximation technique for prosthetic design using numerical foot profiling. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Bani Hashim, A.Y.; Abu Osman, N.A.; Wan Abas, W.A.B.; Abdul Latif, L. (2011) Prosthetic foot design: the significance of the normalized ground reaction force. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Barham, H.A.; Brahim, S.A.; Rozita, Y.; Mohamed, K.A. (2011) Carbon steel corrosion behaviour in aqueous carbonated solution of MEA/bmim DCA. International Journal of Electrochemical Science, 6 (1). pp. 181-198. ISSN 1452-3981

Baroutian, S.; Aroua, M.K.; Raman, A.A.A.; Sulaiman, N.M.N. (2011) A packed bed membrane reactor for production of biodiesel using activated carbon supported catalyst. Bioresource Technology, 102 (2). pp. 1095-1102. ISSN 0960-8524

Billah, M.M.; Rahman, M.M.; Saidur, R.; Hasanuzzaman, M. (2011) Simulation of mhd mixed convection heat transfer enhancement in a double lid-driven obstructed enclosure. International Journal of Mechanical and Materials Engineering, 6 (1). pp. 18-30. ISSN 1823-0334

Billah, M.M.; Rahman, M.M.; Sharif, U.M.; Rahim, N.A.; Saidur, R.; Hasanuzzaman, M. (2011) Numerical analysis of fluid flow due to mixed convection in a lid-driven cavity having a heated circular hollow cylinder. International Communications in Heat and Mass Transfer, 38 (8). pp. 1093-1103. ISSN 0735-1933

C

Cha, J.; Cui, M.; Jang, M.; Cho, S.H.; Moon, D.H.; Khim, J. (2011) Kinetic and mechanism studies of the adsorption of lead onto waste cow bone powder (WCBP) surfaces. Environmental Geochemistry and Health, 33 (SUPPL.). pp. 81-89. ISSN 0269-4042

Chai, A.B.; Andriyana, A.; Verron, E.; Johan, M.R.; Haseeb, A.S.M.A. (2011) Development of a compression test device for investigating interaction between diffusion of biodiesel and large deformation in rubber. Polymer Testing, 30 (8). pp. 867-875. ISSN 0142-9418

Chan, C.H.; Yusoff, R.; Ngoh, G.C.; Kung, F.W. (2011) Microwave-assisted extractions of active ingredients from plants. Journal of Chromatography A, 1218 (37). pp. 6213-6225. ISSN 0021-9673

Cui, M.; Jang, M.; Cho, S.H.; Elena, D.; Khim, J. (2011) Enhancement in mineralization of a number of natural refractory organic compounds by the combined process of sonolysis and ozonolysis (US/O3). Ultrasonics Sonochemistry, 18 (3). pp. 773-780. ISSN 1350-4177

Cui, M.; Jang, M.; Cho, S.H.; Khim, J. (2011) Potential application of sludge produced from coal mine drainage treatment for removing Zn(II) in an aqueous phase. Environmental Geochemistry and Health, 33 (SUPPL.). pp. 103-112. ISSN 0269-4042

Cui, M.; Jang, M.; Lee, S.; Kweon, B.; Yun, S.T.; Khim, J. (2011) Arsenite oxidation and treatment by ultrasound/iron in aqueous solutions. Japanese Journal of Applied Physics, 50 (7). ISSN 0021-4922

Cui, M.; Lee, S.; Jang, M.; Kweon, B.; Jo, H.; Khim, J. (2011) Sonochemical oxidation of arsenite in aqueous phase. Japanese Journal of Applied Physics, 50 (7 PART). ISSN 00214922

D

Deboucha, S.; Hashim, R. (2011) Correlation between total water absorption and wet compressive strength of compressed stabilised peat bricks. International Journal of Physical Sciences, 6 (10). pp. 2432-2438. ISSN 19921950

Deboucha, S.; Hashim, R. (2011) A review on bricks and stabilized compressed earth blocks. Scientific Research and Essays, 6 (3). pp. 499-506. ISSN 1992-2248

Deboucha, S.; Hashim, R.; Aziz, A.A. (2011) Engineering properties of cemented peat bricks. Scientific Research and Essays, 6 (8). pp. 1732-1739. ISSN 19922248

Dhakshyani, R.; Nukman, Y.; Abu Osman, N.A.; Vijay, C. (2011) Preliminary report: rapid prototyping models for Dysplastic hip surgery. Central European Journal of Medicine, 6 (3). pp. 266-270. ISSN 1895-1058

Diya'uddeen, B.H.; Daud, W.M.A.W.; Abdul Aziz, A.R. (2011) Treatment technologies for petroleum refinery effluents: a review. Process Safety and Environmental Protection, 89 (2). pp. 95-105. ISSN 09575820 (ISSN)

Doufesh, H.; Faisal, T.; Lim, K.S.; Ibrahim, F. (2011) EEG Spectral Analysis on Muslim Prayers. Applied Psychophysiology and Biofeedback.

E

Eshraghi, A.; Gholizadeh, H.; Abu Osman, N.A. (2011) Comments on "assessment of amputee socket-stump-residual bone kinematics during strenuous activities using Dynamic Roentgen stereogrammetric analysis". Journal of Biomechanics, 44 (16). pp. 2851-2852. ISSN 0021-9290

F

Far, M.R.H.; Jumaat, M.Z.; Vahid Razavi T., S.; Mohammadi, P.; Mohammadi, H. (2011) Nonlinear analysis of load-deflection testing of reinforced one-way slab strengthened by carbon fiber reinforced polymer (CFRP) and using artificial neural network (ANN) for prediction. International Journal of Physical Sciences, 6 (13). pp. 3054-3061. ISSN 19921950

Faradonbeh, M.A.; Bin Mokhlis, H. (2011) Unbalance fault location in electrical distribution system. In: Electrical Power Distribution Networks (EPDC), 2011 16th Conference on, 2011.

Faradonbeh, M.A.; Bin Mokhlis, H.; Karimi, M.; Shahariari, A. (2011) Balance and single line to ground fault location in electrical distribution system. In: Power Engineering and Optimization Conference (PEOCO), 2011 5th International, 2011, Shah Alam, Selangor (Malaysia).

Fatoyinbo, H.O.; Kadri, N.A.; Gould, D.H.; Hoettges, K.F.; Labeed, F.H. (2011) Real-time cell electrophysiology using a multi-channel dielectrophoretic-dot microelectrode array. Electrophoresis, 32 (18). pp. 2541-2549. ISSN 01730835 (ISSN)

Fayaz, H.; Rahim, N.A.; Saidur, R.; Solangi, K.H.; Niaz, H.; Hossain, M.S. (2011) Solar energy policy: Malaysia vs developed countries. In: 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011, 2011, Kuala Lumpur.

Fayyadh, M.M.; Abdul Razak, H. (2011) Application of weighted average on modal parameters for damage detection algorithms: Case study on steel beam. International Journal of Physical Sciences, 6 (25). pp. 5912-5921. ISSN 19921950

Fayyadh, M.M.; Abdul Razak, H. (2011) Detection of damage location using mode shape deviation: Numerical study. International Journal of Physical Sciences, 6 (24). pp. 5688-5698. ISSN 19921950

Fayyadh, M.M.; Abdul Razak, H. (2011) Weighting method for modal parameter based damage detection algorithms. International Journal of Physical Sciences, 6 (20). pp. 4816-4825. ISSN 19921950

Fayyadh, M.M.; Abdul Razak, H.; Khaleel, O.R. (2011) Differential effects of support conditions on dynamic parameters. In: 12th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC12, 2011, Hong Kong.

Fayyadh, M.M.; Akib, S.; Othman, I.; Razak, H.A. (2011) Experimental investigation and finite element modelling of the effects of flow velocities on a skewed integral bridge. Simulation Modelling Practice and Theory, 19 (9). pp. 1795-1810. ISSN 1569-190X

Fayyadh, M.M.; Razak, H.A. (2011) Modified damage location indices in beam-like structure: Analytical study. Scientific Research and Essays, 6 (32). pp. 6605-6621. ISSN 19922248

Fayyadh, M.M.; Razak, H.A. (2011) Stiffness reduction index for detection of damage location: Analytical study. International Journal of Physical Sciences, 6 (9). pp. 2194-2204. ISSN 19921950

Fayyadh, M.M.; Razak, H.A.; Ismail, Z. (2011) Combined modal parameters-based index for damage identification in a beamlike structure: theoretical development and verification. Archives of Civil and Mechanical Engineering, 11 (3). pp. 587-609. ISSN 1644-9665

Fazal, M.A.; Haseeb, A.S.M.A.; Masjuki, H.H. (2011) Effect of different corrosion inhibitors on the corrosion of cast iron in palm biodiesel. Fuel Processing Technology, 92 (11). pp. 2154-2159. ISSN 0378-3820

Fazal, M.A.; Haseeb, A.S.M.A.; Masjuki, H.H. (2011) Effect of temperature on the corrosion behavior of mild steel upon exposure to palm biodiesel. Energy, 36 (5). pp. 3328-3334. ISSN 0360-5442

Ferdiansyah, T.; Razak, H. A. (2011) Mechanical properties of black sugar palm fiber-reinforced concrete. Journal of Reinforced Plastics and Composites, 30 (11). pp. 994-1004. ISSN 0731-6844

G

Ghadimi, A.; Saidur, R.; Metselaar, H.S.C. (2011) A review of nanofluid stability properties and characterization in stationary conditions. International Journal of Heat and Mass Transfer, 54 (17-18). pp. 4051-4068. ISSN 0017-9310

Ghafarirad, H; Rezaei, SM; Zareinejad, M; Hamdi, M (2011) A robust adaptive control for micro-positioning of piezoelectric actuators with environment force estimation. Transactions of the Institute of Measurement and Control. ISSN 0142-3312

Ghazali, M.; Kadri, N.A. (2011) Preliminary investigation of tensile properties of welded type I collagen to be used as surgical sealant. International Journal of Physical Sciences, 6 (36). pp. 8057-8062. ISSN 19921950 (ISSN)

Gholizadeh, H.; Abu Osman, N.A.; Luviksdottir, A.; Eshraghi, A.; Kamyab, M.; Abas, W. (2011) A new approach for the pistoning measurement in transtibial prosthesis. Prosthetics and Orthotics International, 35 (4). pp. 360-364. ISSN 0309-3646

Gholizadeh, H.; Abu Osman, N.A.; Luviksdottir, A.G.; Kamyab, M.; Eshraghi, A.; Ali, S.; Wan Abas, W.A.B. (2011) A new method for measuring pistoning in lower limb prosthetic. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Gholizadeh, H.; Osman, N.A.A.; Kamyab, M.; Eshraghi, A.; Abas, W.A.B.W.; Azam, M.N. (2011) Transtibial prosthetic socket pistoning: Static evaluation of Seal-In(®) X5 and Dermo(®) Liner using motion analysis system. Clinical Biomechanics (Bristol, Avon). ISSN 1879-1271

Gholizadeh, H.; Osman, N.A.A.; Luviksdottir, A.G.; Eshraghi, A.; Kamyab, M.; Wan Abas, W.A.B. (2011) A new approach for the pistoning measurement in transtibial prosthesis. Prosthetics and Orthotics International, 35 (4). pp. 360-364. ISSN 0309-3646

Goyal , R.K.; Jayakumar , N.S.; Hashim , M.A. (2011) Emulsion stabilization using ionic liquid [BMIM](+)[NTf(2)](-) and performance evaluation on the extraction of chromium. Journal of Hazardous Materials.

H

Haider, H.A.M.; Yusoff, R.; Aroua, M.K. (2011) Equilibrium solubility of carbon dioxide in 2(methylamino)ethanol. Fluid Phase Equilibria, 303 (2). pp. 162-167. ISSN 0378-3812

Hajimolana, S.A.; Hussain, M.A.; Daud, W.M.A.W.; Soroush, M.; Shamiri, A. (2011) Mathematical modeling of solid oxide fuel cells: A review. Renewable & Sustainable Energy Reviews, 15 (4). pp. 1893-1917. ISSN 1364-0321

Hakim, S. J. S.; Abdul Razak, H. (2011) Application of artificial neural network on vibration test data for damage identification in bridge girder. International Journal of the Physical Sciences, 6 (35). pp. 7991-8001. ISSN 19921950

Hamah-Ali, B.; Ali, B.S.; Yusoff, R.; Aroua, M.K. (2011) Corrosion of carbon steel in aqueous carbonated solution of MEA/bmimDCA. International Journal of Electrochemical Science, 6. pp. 181-198. ISSN 1452-3981

Hambali, A; Sapuan , SM; Rahim , AS; Ismail, N; Nukman, Y (2011) Concurrent Decisions on Design Concept and Material Using Analytical Hierarchy Process at the Conceptual Design Stage. Concurrent Engineering-Research and Application, 19 (2). pp. 111-121. ISSN 1063-293X

Hambali, A.; Sapuan, S.M.; Rahim, A.S.; Ismail, N.; Nukman, Y. (2011) Concurrent decisions on design concept and material using analytical hierarchy process at the conceptual design stage. Concurrent Engineering-Research and Applications, 19 (2). pp. 111-121. ISSN 1063-293X

Han, J.; Annuar, M.S.M.; Ariffin, M.F.K.; Gumel, A.M.; Ibrahim, S.; Heidelberg, T.; Bakar, B.; Hossain, A.B.M.S.; Sharifuddin, Y. (2011) Lipase-catalyzed synthesis of 6-o-d-glucosyldecanoate in tert-butanol: reaction optimization and effect of mixing power input. Biotechnology & Biotechnological Equipment, 25 (4). pp. 2642-2651. ISSN 1310-2818

Hasan, D.B.; Abdul Aziz, A.R.; Daud, W.M.A.W. (2011) Application of response surface methodology in process parameters optimization for phenol mineralization using Fenton's peroxidation. African Journal of Biotechnology, 10 (50). pp. 10218-10231. ISSN 16845315 (ISSN)

Hasan, M.M.; Haseeb, A.S.M.A.; Masjuki, H.H. (2011) Intermixing of metal oxide/Ag/metal oxide nanoscale multilayers prepared by rf reactive magnetron sputtering. Surface Engineering, 27 (5). pp. 382-388. ISSN 0267-0844

Hasanuzzaman, M.; Rahim, N. A.; Saidur, R.; Kazi, S. N. (2011) Energy savings and emissions reductions for rewinding and replacement of industrial motor. Energy, 36 (1). pp. 233-240. ISSN 0360-5442

Hasanuzzaman, M.; Rahim, N.A.; Saidur, R. (2011) Analysis of energy, exergy and energy savings of a fire tube boiler. In: 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011, 2011, Kuala Lumpur.

Hasanuzzaman, M.; Saidur, R.; Masjuki, H.H. (2011) Effects of different variables on moisture transfer of household refrigerator-freezer. Energy Education Science and Technology Part A : Energy Science and Research, 27 (2). pp. 401-418. ISSN 1308-772X

Hasanuzzaman, M.; Saidur, R.; Rahim, N. A. (2011) Energy, exergy and economic analysis of an annealing furnace. International Journal of Physical Sciences, 6 (7). pp. 1257-1266. ISSN 1992-1950

Hasanuzzaman, M.; Saidur, R.; Rahim, N.A. (2011) Effectiveness enchancement of heat exchanger by using nanofluids. In: 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011, 2011, Kuala Lumpur.

Haseeb, A.S.M.A. (2011) Implementation of micro-level problem based learning in a course on electronic materials. Journal of Materials Education, 33 (5-6). pp. 273-282. ISSN 0738-7989

Haseeb, A.S.M.A.; Chew, C.S.; Johan, M.R. (2011) Interfacial reactions between Sn-3.5 Ag solder and Ni-W alloy films. Journal of Materials Science-Materials in Electronics, 22 (9). pp. 1372-1377. ISSN 0957-4522

Haseeb, A.S.M.A.; Jun, T.S.; Fazal, M.A.; Masjuki, H.H. (2011) Degradation of physical properties of different elastomers upon exposure to palm biodiesel. Energy, 36 (3). pp. 1814-1819.

Haseeb, A.S.M.A.; Leng, T.S. (2011) Effects of Co nanoparticle addition to Sn-3.8Ag-0.7Cu solder on interfacial structure after reflow and ageing. Intermetallics, 19 (5). pp. 707-712. ISSN 0966-9795

Hashim , M.A.; Mukhopadhyay , S.; Sahu , J.N.; Sengupta , B. (2011) Remediation technologies for heavy metal contaminated groundwater. Journal of Environmental Management, 92 (10). ISSN 03014797

Hassan, A.; Ibrahim, F. (2011) Development of a kidney teleultrasound consultation system. Journal of Digital Imaging, 24 (2). pp. 308-313. ISSN 08971889

Hassan, L.H.; Moghavvemi, M.; Mohamed, H.A.F. (2011) Impact of UPFC-based damping controller on dynamic stability of Iraqi power network. Scientific Research and Essays, 6 (1). pp. 136-145. ISSN 19922248

Hassan, M.A.; Ahmed, K.I.E.; Takakura, N. (2011) A developed process for deep drawing of metal foils square cups. Journal of Materials Processing Technology.

Hassan, M.R.A.; Tamchek, N.; Abas, A.F.; Johar, R.M.; Adikan, F.R.M. (2011) Dual-phase sensing for early detection of prepreg structural failures via etched cladding Bragg grating. Sensors and Actuators A Physical, 171 (2). pp. 126-130. ISSN 0924-4247

Hosen, M.A.; Hussain, M.A.; Mjalli, F.S. (2011) Control of polystyrene batch reactors using neural network based model predictive control (NNMPC): an experimental investigation. Control Engineering Practice, 19 (5). pp. 454-467. ISSN 0967-0661

Hosen, M.A.; Hussain, M.A.; Mjalli, F.S. (2011) Hybrid modelling and kinetic estimation for polystyrene batch reactor using Artificial Neutral Network (ANN) approach. Asia-Pacific Journal of Chemical Engineering, 6 (2). pp. 274-287. ISSN 1932-2135

Hossain, M.S.; Rahim, N.A.; Solangi, K.H.; Saidur, R.; Fayaz, H.; Madlool, N.A. (2011) Global solar energy use and social viability in Malaysia. In: 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011, 2011, Kuala Lumpur.

Hossain, M.S.; Saidur, R.; Fayaz, H.; Rahim, N.A.; Islam, M.R.; Ahamed, J.U.; Rahman, M.M. (2011) Review on solar water heater collector and thermal energy performance of circulating pipe. Renewable and Sustainable Energy Reviews, 15 (8). pp. 3801-3812. ISSN 1364-0321

Hussain, M. A.; Mahmoud, K. M. (2011) Determination of quercetin in some natural products using reversed FIA-CL method. Der Pharma Chemica, 3 (2). pp. 321-329. ISSN 0975413X

Hussin, F.; Aroua, M.K.; Daud, W.M.A.W. (2011) Textural characteristics, surface chemistry and activation of bleaching earth: A review. Chemical Engineering Journal, 170 (1). pp. 90-106. ISSN 1385-8947

I

Illias, H.A.; Chen, G.; Lewin, P. (2011) Partial discharge behavior within a spherical cavity in a solid dielectric material as a function of frequency and amplitude of the applied voltage. IEEE Transactions on Dielectrics and Electrical Insulation, 18 (2). pp. 432-443. ISSN 1070-9878

Iqbal, S.M.A.; Mekhilef, S.; Soin, N.; Omar, R. (2011) Buck and boost converter design optimization parameters in modern VLSI technology. In: 12th International Conference and Seminar on Micro/Nanotechnologies and Electron Devices, EDM'2011, Erlagol, Altai.

Iqbal, S.M.A.; Mekhilef, S.; Soin, N.; Omar, R. (2011) Dc-Dc buck and boost converter design issues in recent VLSI platform. In: 2011 IEEE Regional Symposium on Micro and Nano Electronics, RSM 2011, Kota Kinabalu, Sabah.

Islam, A.; Jameel, M.; Ahmad, S.I.; Salman, F.A.; Jumaat, M.Z. (2011) Engendering earthquake response spectra for Dhaka region usable in dynamic analysis of structures. Scientific Research and Essays, 6 (16). pp. 3519-3530. ISSN 1992-2248

Islam, A.; Jameel, M.; Jumaat, M.Z. (2011) Seismic isolation in buildings to be a practical reality: behavior of structure and installation technique. Journal of Engineering and Technology Research, 3 (4). pp. 99-117. ISSN 2006-9790

Islam, A.B.M.S.; Jameel, M.; Uddin, M.A.; Ahmad, Syed Ishtiaq (2011) Simplified design guidelines for seismic base isolation in multi-storey buildings for Bangladesh National Building Code (BNBC). International Journal of Physical Sciences, 6 (23). pp. 5467-5486. ISSN 1992 - 1950

Islam, M.R.; Saidur, R.; Rahim, N.A. (2011) Assessment of wind energy potentiality at Kudat and Labuan, Malaysia using Weibull distribution function. Energy, 36 (2). pp. 985-992. ISSN 0360-5442

Islam, M.S.; Yusoff, R.; Ali, B.S.; Islam, M.N.; Chakrabarti, M.H. (2011) Degradation studies of amines and alkanolamines during sour gas treatment process. International Journal of Physical Sciences, 6 (25). pp. 5883-5896. ISSN 19921950

Ismail, L.; Darusalam, G. (2011) Higher educational attainment among female than male students: the intervention to increase enrolment of male students in Malaysian tertiary institution. Proceedings : International Conference : Future Education in Global Challenges. pp. 231-236.

Ismail, M.A.; Tamchek, N.; Abu Hassan, M.R.; Dambul, K.D.; Selvaraj, J.; Abd Rahim, N.; Sandoghchi, S.R.; Adikan, F.R.M. (2011) A fiber bragg grating-bimetal temperature sensor for solar panel inverters. Sensors, 11 (9). pp. 8665-8673. ISSN 1424-8220

Ismail, N.A.; Annuar, M.S.M.; Ibrahim, S. (2011) Dye decolorization by immobilized laccase: statistical optimization and effect of impeller geometry. International Journal of Chemical Reactor Engineering, 9. ISSN 1542-6580

Issabayeva, G.; Aroua, M.K. (2011) Removal of copper and zinc ions onto biomodified palm shell activated carbon. World Academy of Science, Engineering and Technology, 76. pp. 259-262. ISSN 2010-376X

J

Jameel, M.; Ahmad, S.; Asme, M (2011) Fatigue reliability assessment of coupled spar-mooring system. Omae2011: Proceedings of the Asme 30th International Conference on Ocean, Offshore and Arctic Engineering, Vol 2: Structures, Safety and Reliability . Amer Soc Mechanical Engineers, New York, pp. 497-505.

Jameel, M.; Ahmad, S.; Islam, A.; Jumaat, M.Z. (2011) Nonlinear analysis of fully coupled integrated spar-mooring line system. In: Int. Offshore Polar Engineering Conference (ISOPE 2011). Maui, Hawii, 2011, Maui, Hawaii, USA.

Jamian, J.J.; Musa, H.; Mustafa, M.W.; Mokhlis, H.; Adamu, S.S. (2011) Combined voltage stability index for charging station effect on distribution network. International Review of Electrical Engineering-Iree, 6 (7). pp. 3175-3184. ISSN 1827-6660

Jamian, J.J.; Mustafa, M.W.; Mokhlis, H.; Bahamdin, M.A. (2011) Conceptual data management and communication for smart distribution system. In: Clean Energy and Technology (CET), 2011 IEEE First Conference on, 2011.

Jamian, J.J.; Mustafa, M.W.; Mokhlis, H.; Baharudin, M.A. (2011) Smart grid communication concept for frequency control in distribution system. In: Power Engineering and Optimization Conference (PEOCO), 2011 5th International, 2011, Shah Alam, Selangor (Malaysia).

Jang, M.; Kwon, H. (2011) Pilot-scale tests to optimize the treatment of net-alkaline mine drainage. Environmental Geochemistry and Health, 33 (SUPPL.). pp. 91-101. ISSN 0269-4042

Johnson Alengaram, U.; Jumaat, M.Z.; Mahmud, H.; Fayyadh, M.M. (2011) Shear behaviour of reinforced palm kernel shell concrete beams. Construction and Building Materials, 25 (6). pp. 2918-2927. ISSN 09500618

Jumaat, M.Z.; Alam, M.A. (2011) Optimization of intermediate anchors to eliminate premature shear failure of CFRP laminate flexurally strengthened R.C beams. International Journal of Physical Sciences, 6 (2). pp. 182-192. ISSN 19921950

Jumaat, M.Z.; Rahman, M.A.; Alam, M.A.; Rahman, M.M. (2011) Premature failures in plate bonded strengthened RC beams with an emphasis on premature shear: a review. International Journal of Physical Sciences, 6 (2). pp. 156-168. ISSN 19921950

Jumaat, M.Z.; Rahman, M.M.; Rahman, M.A. (2011) Review on bonding techniques of CFRP in strengthening concrete structures. International Journal of Physical Sciences, 6 (15). pp. 3567-3575. ISSN 19921950

Jumaat, S.A.; Musirin, I.; Murtadha, O.M.; Mokhlis, H. (2011) PSO Based technique for loss minimization considering voltage profile and cost function. In: Power Engineering and Optimization Conference (PEOCO), 2011 5th International, 2011, Shah Alam, Selangor (Malaysia).

Jumaat, S.A.; Musirin, I.; Othman, M.M.; Mokhlis, H. (2011) Optimal location and sizing of SVC using Particle Swarm Optimization technique. In: Informatics and Computational Intelligence (ICI), 2011 First International Conference on, 2011.

Jumaat, S.A.; Musirin, I.; Othman, M.M.; Mokhlis, H. (2011) Transmission loss minimization using SVC based on particle swarm optimization. In: Industrial Electronics and Applications (ISIEA), 2011 IEEE Symposium on, 2011, Langkawi, Malaysia.

K

Kadri, N.A.; Raha, M.G.; Murphy, B.P. (2011) Polyvinyl alcohol as a viable membrane in artificial tissue design and development. Clinics, 66 (8). pp. 1489-1493. ISSN 18075932 (ISSN)

Kamali, B.; Hashim, R. (2011) Mangrove restoration without planting. Ecological Engineering, 37 (2). pp. 387-391. ISSN 0925-8574

Karim, M.R.; Manivannan, G.; Gnanendran, C.T.; Lo, S.C.R. (2011) Predicting the long-term performance of a geogrid-reinforced embankment on soft soil using two-dimensional finite element analysis. Canadian Geotechnical Journal, 48 (5). pp. 741-753. ISSN 00083674

Karman, S.; Hasikin, K.; Ting, H.N.; Ng, S.C.; Abdul Wahab, A.K.; Lim, E.; Hamzaid, N.A.; Wan Abas, W.A.B. (2011) OBE implementation and design of continual quality improvement (CQI) for accreditation of biomedical engineering program University of Malaya. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Khalaj-Amirhosseini, M.; Moghavvemi, M.; Attaran, A. (2011) A triangular Wilkinson power divider with spaced output ports. Iranian Journal of Electrical and Electronic Engineering, 7 (4). 213-216. ISSN 17352827

Khaleel, O.R.; Al-Mishhadani, S.A.; Abdul Razak, H. (2011) The effect of coarse aggregate on fresh and hardened properties of self-compacting concrete (SCC). In: 12th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC12, 2011, Hong Kong.

Khalil, M.; Jan, B.M.; Raman, A.A.A. (2011) Rheological and statistical evaluation of nontraditional lightweight completion fluid and its dependence on temperature. Journal of Petroleum Science and Engineering, 77 (1). pp. 27-33. ISSN 0920-4105

Kobraei, M.; Jumaat, M.Z.; Shafigh, P. (2011) An experimental study on shear reinforcement in RC beams using CFRP-bars. Scientific Research and Essays, 6 (16). pp. 3447-3460. ISSN 19922248

Kong, P.S.; Aroua, M.K.; Ir, A.A.R. (2011) Kinetics study of Esterification Reaction of 2-Methyl-4-Chlorophenoxyacetic acid (MCPA Acid). International Journal of Chemical Reactor Engineering, 9. ISSN 1542-6580

Kwon, H.H.; Shim, Y.S.; Lee, J.; Jang, M.; Kim, K. (2011) Preface: a special issue on mine reclamation and suitable management for heavy metals. Environmental Geochemistry and Health, 33 (SUPPL.). pp. 1-2. ISSN 0269-4042

L

Laghari, J.; Mokhlis, H.; Bakar, A.B.A.; Mohammad, H. (2011) Comparative studies on load frequency control for islanded distribution network connected with mini hydro. In: Power Engineering and Optimization Conference (PEOCO), 2011 5th International, 2011, Shah Alam, Selangor (Malaysia).

Laghari, J.; Mokhlis, H.; Bakar, A.B.H.A.; Mohammad, H. (2011) Comparative studies on load frequency control for islanded distribution network connected with mini hydro. In: Power Engineering and Optimization Conference (PEOCO), 2011 5th International, 2011, Selangor, Malaysia.

Liza, S.; Haseeb, A.S.M.A.; Abbas, A.A.; Masjuki, H.H. (2011) Failure analysis of retrieved UHMWPE tibial insert in total knee replacement. Engineering Failure Analysis, 18 (6). pp. 1415-1423. ISSN 1350-6307

M

Madlool, N. A.; Saidur, R.; Hossain, M. S.; Rahim, N. A. (2011) A critical review on energy use and savings in the cement industries. Renewable and Sustainable Energy Reviews, 15 (4). pp. 2042-2060. ISSN 1364-0321

Mahlia, T. M. I.; Razak, H. A.; Nursahida, M. A. (2011) Life cycle cost analysis and payback period of lighting retrofit at the University of Malaya. Renewable & Sustainable Energy Reviews, 15 (2). pp. 1125-1132. ISSN 1364-0321

Mahlia, T. M. I.; Taufiq, B. N.; Ong, K. P.; Saidur, R. (2011) Exergy analysis for day lighting, electric lighting and space cooling systems for a room space in a tropical climate. Energy and Buildings, 43 (7). pp. 1676-1684. ISSN 0378-7788

Mahlia, T.M.I.; Razak, H. Abdul; Nursahida, M.A. (2011) Life cycle cost analysis and payback period of lighting retrofit at the University of Malaya. Renewable and Sustainable Energy Reviews, 15 (2). pp. 1125-1132. ISSN 13640321

Mahlia, T.M.I.; Saidur, R.; Yanti, P.A.A.; Masjuki, H.H. (2011) Role of energy guide labels in consumers purchase decision for household electrical appliances. Energy Education Science and Technology Part a-Energy Science and Research, 27 (1). pp. 95-104. ISSN 1308-772X

Mahmoodian, Reza; Rahbari, Reza; Hamdi, Mohammad (2011) Safety issues improvement in ceramic lined composite pipe produced using SHS method. In: 2011 International Conference on Industrial Engineering and Operations Management , January 22 – 24, 2011, Kuala Lumpur, Malaysia.

Mahmoud, S.S.; Jusoff, K.; Li, K. (2011) Effective induction motor controller based Voltage/frequency. In: International Conference on Electronic Computer Technology , FEB 20-22, 2009, Macau.

Manivannan, G.; Karim, M.R.; Gnanendran, C.T.; Lo, S.C.R. (2011) Calculated and observed long term performance of Leneghans embankment. Geomechanics and Geoengineering, 6 (3). pp. 195-207. ISSN 1748-6033

Mashaan, N.S.; Ali, A.H.; Karim, M.R.; Abdelaziz, M. (2011) Effect of blending time and crumb rubber content on properties of crumb rubber modified asphalt binder. International Journal of Physical Sciences, 6 (9). pp. 2189-2193. ISSN 19921950

Mashaan, N.S.; Ali, A.H.; Karim, M.R.; Abdelaziz, M. (2011) Effect of crumb rubber concentration on the physical and rheological properties of rubberised bitumen binders. International Journal of the Physical Sciences, 6 (4). pp. 684-690.

Matsumoto, T.; Takahashi, T.; Iwahashi, M.; Kimura, T.; Salbiah, S.; Mokhtar, N. (2011) Visual compensation in localization of a robot on a ceiling map. Scientific Research and Essays, 6 (1). pp. 131-135. ISSN 1992-2248

Mazandarani, A.; Mahlia, T.M.I.; Chong, W.T.; Moghavvemi, M. (2011) Fuel consumption and emission prediction by Iranian power plants until 2025. Renewable and Sustainable Energy Reviews, 15 (3). pp. 1575-1592. ISSN 13640321

Mazlan, M.H.; Abu Osman, N.A.; Wan Abas, W.A.B. (2011) Hip 3D joint mechanics analysis of normal and obese individuals' gait. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Mekhilef, S. (2011) Three phase hybrid multilevel inverter control using vector transformation. In: 2011 Canadian Conference on Electrical and Computer Engineering, CCECE 2011, Niagara Falls, ON.

Mekhilef, S.; Chandrasegaran, D. (2011) Assessment of off-shore wind farms in Malaysia. In: 2011 IEEE Region 10 Conference: Trends and Development in Converging Technology Towards 2020, TENCON 2011, Bali.

Mekhilef, S.; Kadir, M.N.A. (2011) Novel vector control method for three-stage hybrid cascaded multilevel inverter. Ieee Transactions on Industrial Electronics, 58 (4). pp. 1339-1349. ISSN 0278-0046

Mekhilef, S.; Saidur, R.; Safari, A. (2011) A review on solar energy use in industries. Renewable and Sustainable Energy Reviews, 15 (4). pp. 1777-1790. ISSN 1364-0321

Mekhilef, S.; Saidur, R.; Safari, A. (2011) A review on solar energy use in industries. Renewable and Sustainable Energy Reviews, 15 (4). pp. 1777-1790. ISSN 13640321

Mekhilef, S.; Saidur, R.; Safari, A.; Mustaffa, W.E.S.B. (2011) Biomass energy in Malaysia: current state and prospects. Renewable and Sustainable Energy Reviews, 15 (7). pp. 3360-3370. ISSN 1364-0321

Mekhilef, S.; Saidur, R.; Safari, A.; Mustaffa, W.E.S.B. (2011) Biomass energy in Malaysia: current state and prospects. Renewable and Sustainable Energy Reviews, 15 (7). pp. 3360-3370. ISSN 1364-0321

Mekhilef, S.; Siga, S.; Saidur, R. (2011) A review on palm oil biodiesel as a source of renewable fuel. Renewable and Sustainable Energy Reviews, 15 (4). pp. 1937-1949. ISSN 1364-0321

Mekhilef, S.; Siga, S.; Saidur, R. (2011) A review on palm oil biodiesel as a source of renewable fuel. Renewable and Sustainable Energy Reviews, 15 (4). pp. 1937-1949. ISSN 1364-0321

Mekhilef, S.; Tarek, M.; Abd. Rahim, N. (2011) Single-phase hybrid active power filter with adaptive notch filter for harmonic current estimation. IETE Journal of Research, 57 (1). pp. 20-28. ISSN 0377-2063

Menshawi, K.M.; Abdulkader, M.N.; Mekhilef, S. (2011) Voltage vector approximation control of multistage - Multilevel inverter using simplified logic implementation. In: 2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011, Singapore.

Menshawi, M.K.; Kadir, M.N.A.; Mekhilef, S. (2011) Two-dimensional hysteresis comparators to control multistage inverters with maximum number of levels. In: 8th International Conference on Power Electronics - ECCE Asia: "Green World with Power Electronics", ICPE 2011-ECCE Asia, Jeju.

Ming, C.C.; Hussain, M.A.; Aroua, M.K. (2011) Neural network based controller for Cr 6+-Fe 2+ batch reduction process. Neurocomputing, 74 (18). pp. 3773-3784. ISSN 0925-2312

Ming, C.C.; Hussain, M.A.; Aroua, M.K. (2011) Neural network based controller for Cr6+–Fe2+ batch reduction process. Neurocomputing, 74 (18). pp. 3773-3784. ISSN 09252312

Misran, H.; Aminuddin, A.M.; Zini, F.A.M.; Singh, R. (2011) Synthesis and structural consideration of metal-organic framework (MOF) coordination polymer with various metal linker ratios. Key Engineering Materials, 462-46 . Engineering, pp. 1103-1108.

Misran, H.; Singh, R.; Ghazali, M.J. (2011) Palm oil based fatty alcohols templated mesoporous silica and silica spheres. International Journal of Nanoscience, 10 (06). pp. 1275-1281.

Moghaddam, T.B.; Karim, M.R.; Abdelaziz, M. (2011) A review on fatigue and rutting performance of asphalt mixes. Scientific Research and Essays, 6 (4). pp. 670-682. ISSN 19922248

Moghavvemi, M.; Attaran, A. (2011) Design and analysis of a SAW gas sensor based LF RFID tag in 0.18 um CMOS process. Sensors and Transducers, 130 (7). pp. 155-162. ISSN 17265479

Moghavvemi, M.; Attaran, A. (2011) Design of a low voltage 0.18 um CMOS Surface Acoustic Wave gas sensor. Sensors and Transducers, 125 (2). pp. 22-29. ISSN 17265479

Moghavvemi, M.; Attaran, A. (2011) Performance review of high-quality-factor, low-noise, and wideband radio-frequency LC-VCO for wireless communication. IEEE Microwave Magazine, 12 (4). pp. 130-146.

Moghavvemi, M.; Attaran, A. (2011) Recent advances in delay cell VCOs [application notes]. IEEE Microwave Magazine, 12 (5). pp. 110-118. ISSN 15273342

Moghavvemi, M.; Attaran, A.; Moshrefpour Esfahani, M.H. (2011) EEG artifact signals tracking and filtering in real time for command control application. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 20 - 23 June 2011, Kuala Lumpur.

Moghavvemi, M.; Chiang, C.Y. (2011) Insulation coordination associated with distributed generation connected at distribution level. International Journal of Electrical Power and Energy Systems, 33 (4). pp. 1077-1091. ISSN 01420615

Mohamad, H.; Mokhlis, H.; Abu Bakar, A.; Ping, H.W. (2011) A review on islanding operation and control for distribution network connected with small hydro power plant. Renewable & Sustainable Energy Reviews, 15 (8). pp. 3952-3962. ISSN 1364-0321

Mohamed Saaid, M.F.; Wan Abas, W.A.B.; Aroff, H.; Mokhtar, N.; Ramli, R.; Ibrahim, Z. (2011) Change point detection of EEG signals based on particle swarm optimization. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Mohamed Saaid, M.F.; Wan Abas, W.A.B.; Aroff, H.; Mokhtar, N.; Ramli, R.; Ibrahim, Z. (2011) Change point detection of EEG signals based on particle swarm optimization. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Mohammad, M.; Jumaat, M.Z.; Chemrouk, M.; Ghasemi, A.; Hakim, S.J.S.; Najmeh, R. (2011) An experimental investigation of the stress-strain distribution in high strength concrete deep beams. In: 12th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC12, 2011, Hong Kong.

Mohammadhassani, M.; Jumaat, M.Z.; Ashour, A.; Jameel, M. (2011) Failure modes and serviceability of high strength self compacting concrete deep beams. Engineering Failure Analysis, 18 (8). pp. 2272-2281. ISSN 1350-6307

Mohammadhassani, M.; Jumaat, M.Z.; Chemrouk, M.; Maghsoudi, A.A.; Jameel, M.; Akib, S. (2011) An experimental investigation on bending stiffness and neutral axis depth variation of over-reinforced high strength concrete beams. Nuclear Engineering and Design, 241 (6). pp. 2060-2067. ISSN 0029-5493

Mohammadhassani, M.; Jumaat, M.Z.; Maghsoudi, A.A.; Akib, S.; Mohamed, J.; Najmeh, R.; Amin, M.; Hamid, S.; Esmaeil, H.R.; Farhad, G. (2011) Bending stiffness and neutral axis depth variation of high strength concrete beams in seismic hazardous areas: experimental investigation. International Journal of the Physical Sciences, 6 (3). pp. 482-494. ISSN 19921950

Mohammadi, P.; Ibrahim, S.; Annuar, M.S.M.; Law, S. (2011) Effects of different pretreatment methods on anaerobic mixed microflora for hydrogen production and COD reduction from palm oil mill effluent. Journal of Cleaner Production, 19 (14). pp. 1654-1658. ISSN 0959-6526

Mohammadjafari, M.; Ahmed, S.; Md Dawal, S.Z.; Zayandehroodi, H. (2011) The importance of project management in SMEs for the development of new products through E-Collaboration. African Journal of Business Management, 5 (30). pp. 11844-11855. ISSN 1993-8233

Mohammadjafari, Marjan; Ahmed, Shamsuddin; Md Dawal, Siti Zawiah; Zayandehroodi, H. (2011) A conceptual model for creating a favorable environment to reduce the production time and cost of production by e_collaboration. Australian Journal of Basic and Applied Sciences, 5 (6). pp. 1020-1025. ISSN 1991-8178

Mohammadnejad, M.; Ghazvini, M.; Javadi, F.S.; Saidur, R. (2011) Estimating the exergy efficiency of engine using nanolubricants. Energy Education Science and Technology Part A: Energy Science and Research, 27 (2). pp. 447-454. ISSN 1308-772X

Mohammed, H. A.; Bhaskaran, G.; Shuaib, N. H.; Saidur, R. (2011) Heat transfer and fluid flow characteristics in microchannels heat exchanger using nanofluids: A review. Renewable and Sustainable Energy Reviews, 15 (3). pp. 1502-1512. ISSN 1364-0321

Mohammed, H.A.; Al-Aswadi, A.A.; Shuaib, N.H.; Saidur, R. (2011) Convective heat transfer and fluid flow study over a step using nanofluids: A review. Renewable and Sustainable Energy Reviews, 15 (6). pp. 2921-2939. ISSN 1364-0321

Mohammed, H.A.; Bhaskaran, G.; Shuaib, N.H.; Saidur, R. (2011) Numerical study of heat transfer enhancement of counter nanofluids flow in rectangular microchannel heat exchanger. Superlattices and Microstructures, 50 (3). pp. 215-233. ISSN 0749-6036

Mohammed, H.A.; Om, N.I.; Shuaib, N.H.; Hussein, A.K.; Saidur, R. (2011) The application of nanofluids on three dimensional mixed convection heat transfer in equilateral triangular duct. International Journal of Heat and Technology, 29 (2). pp. 3-12. ISSN 03928764

Mohammed, H.A.; Om, N.I.; Shuaib, N.H.; Saidur, R. (2011) Heat transfer enhancement for combined convection flow of nanofluids in a vertical rectangular duct considering radiation effects. Heat Transfer - Asian Research, 40 (5). pp. 448-463. ISSN 10992871

Mohammed, M. M.; Hashim, R.; Salman, F. A. (2011) Improvement in physical properties for ground treated with rapid impact compaction. International Journal of Physical Sciences, 6 (22). pp. 5133-5140. ISSN 19921950

Mohammed, S.A.; Abdullah, E.C.; Geldart, D.; Raman, A.A.A. (2011) Measuring powder flowability with a modified Warren Spring cohesion tester. Particuology, 9 (2). pp. 148-154. ISSN 1674-2001

Mohd Said, S.; Chow, Chee-Onn; Mokhtar, N.; Ramli, R.; Tuan Ya, T.M.Y.S.; Mohd Sabri, M.F. (2011) Accreditation of engineering programs: an evaluation of current practices in Malaysia. International Journal of Technology and Design Education. pp. 1-16. ISSN 0957-7572

Mokhlis, H.; Li, H.Y. (2011) Non-linear representation of voltage sag profiles for fault location in distribution networks. International Journal of Electrical Power & Energy Systems, 33 (1). pp. 124-130. ISSN 0142-0615

Mokhlis, H.; Mohamad, H.; Bakar, A.H.A.; Li, H.Y. (2011) Evaluation of fault location based on voltage sags profiles: a study on the influence of voltage sags patterns. International Review of Electrical Engineering-Iree, 6 (2). pp. 874-880. ISSN 1827-6660

Mokhlis, H.; Mohamad, H.; Li, H.Y.; Abu Bakar, A. (2011) Voltage sags matching to locate faults for underground distribution networks. Advances in Electrical and Computer Engineering, 11 (2). pp. 43-48. ISSN 1582-7445

Mokhtar, N.; Arof, H.; Adikan, F.R.M.; Mubin, M. (2011) Real time noise-speech discrimination in time domain for speech recognition application. Scientific Research and Essays, 6 (1). pp. 18-22. ISSN 1992-2248

Mokhtar, N.; Arof, H.; Adikan, F.R.M.; Mubin, M. (2011) Real time noise-speech discrimination in time domain for speech recognition application. Scientific Research and Essays, 6 (1). pp. 18-22. ISSN 19922248

Mokhtar, N.B.; Arof, H.; Iwahashi, M. (2011) Real time eyeball tracking via derivative dynamic time warping for human-machine interface. International Journal of Innovative Computing Information and Control, 7 (7B). pp. 4335-4346. ISSN 1349-4198

Moo, E.K.; Abu Osman, N.A.; Pingguan-Murphy, B. (2011) The metabolic dynamics of cartilage explants over a long-term culture period. Clinics, 66 (8). pp. 1431-1436. ISSN 1807-5932

Mounes, S.M.; Karim, M.R.; Mahrez, A.; Khodaii, A. (2011) An overview on the use of geosynthetics in pavement structures. Scientific Research and Essays, 6 (11). pp. 2251-2258. ISSN 19922248

Muhammad, B.M.Y.; Raman, A.A.A. (2011) Production of superlight saraline drill-in fluid. Chemistry and Technology of Fuels and Oils, 46 (6). pp. 401-404. ISSN 0009-3092

Munawar, K.; Badrul, M.J.; Abdul Aziz, A.R. (2011) Preparation of a nontraditional ultralight fluid for increasing oil production using natural, ground, and acid-activated clay. Chemistry and Technology of Fuels and Oils, 46 (6). pp. 392-400. ISSN 00093092 (ISSN)

N

Narmashiri, K.; Jumaat, M.Z. (2011) Reinforced steel I-beams: a comparison between 2D and 3D simulation. Simulation Modelling Practice and Theory, 19 (1). pp. 564-585. ISSN 1569-190X

Narmashiri, K.; Jumaat, M.Z.; Ramli Sulong, N.H. (2011) Local stiffening of steel I-beams by using CFRP materials. Advanced Materials Research, 163. pp. 3838-3843. ISSN 0878492062

Narmashiri, K.; Jumaat, M.Z.; Sulong, N.H.R. (2011) Failure modes of CFRP flexural strengthened steel I-beams. In: 8th International Conference on Composite Science and Technology, ICCST8, 2011, Kuala Lumpur.

Narmashiri, K.; Jumaat, M.Z.; Sulong, N.H.R. (2011) Local stiffening of steel I-beams by using CFRP materials. In: 2011 International Conference on Structures and Building Materials, ICSBM 2011, 2011, Guangzhou.

Narmashiri, K.; Ramli Sulong, N.H.; Jumaat, M.Z. (2011) Flexural strengthening of steel I-beams by using CFRP strips. International Journal of Physical Sciences, 6 (7). pp. 1620-1627. ISSN 19921950

Nawawi, N.A.; Sopyan, I.; Ramesh, S.; Afzeri, F (2011) Phase behaviour of manganese-doped biphasic calcium phosphate ceramics synthesized via sol-gel method. Asia-Pacific Journal of Chemical Engineering, 6 (6). pp. 823-831. ISSN 1932-2143

Ng, Y.S.; Jayakumar, N.S.; Hashim, M.A. (2011) Behavior of hydrophobic ionic liquids as liquid membranes on phenol removal: Experimental study and optimization. Desalination, 278 (1-3). pp. 250-258. ISSN 0011-9164

Norhirni, MZ; Hamdi, M; Nurmaya Musa, S; Saw, LH; Mardi, NA; Hilman, N (2011) Load and stress analysis for the swash plate of an axial piston pump/motor. Journal of dynamic systems, measurement, and control-Transactions of the Asme, 133 (6). ISSN 0022-0434

Nosrati , S.; Jayakumar , N.S.; Hashim , M.A. (2011) Performance evaluation of supported ionic liquid membrane for removal of phenol. Journal of Hazardous Materials. ISSN 03043894

O

Ooi, C.W.; Tan, C.P.; Hii, S.L.; Ariff, A.; Ibrahim, S.; Ling, T.C. (2011) Primary recovery of lipase derived from Burkholderia sp. ST8 with aqueous micellar two-phase system. Process Biochemistry, 46 (9). pp. 1847-1852. ISSN 1359-5113

Oshkour, A.A.; Abu Osman, N.A.; Davoodi, M.M.; Bayat, M.; Yau, Y.H.; Wan Abas, W.A.B. (2011) Impact load and mechanical respond of tibiofemoral joint. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Oshkour, A.A.; Abu Osman, N.A.; Davoodi, M.M.; Bayat, M.; Yau, Y.H.; Wan Abas, W.A.B. (2011) Knee joint stress analysis in standing. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

P

Palizban, O.; Mekhilef, S. (2011) Modeling and control of photovoltaic panels base perturbation and observation MPPT method. In: 2011 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2011, Penang.

Palizban, O.; Mekhilef, S. (2011) Power optimization and static performance investigation of an island-mode doubly-fed induction generator (DFIG). In: 2011 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2011, Penang.

Palizban, O.; Rezaei, M. A.; Mekhilef, S. (2011) Active and reactive power control for a hybrid system with photovoltaic panel, wind turbine, fuel cells, electrolyzer and super capacitor in off-grid mode. In: 2011 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2011, Penang.

Parvizi, R.; Ali, N.M.; Harun, S.W.; Moghavvemi, M.; Arof, H.; Ahmad, H. (2011) Multi-wavelength Brillouin fiber laser using dual-cavity configuration. Laser Physics, 21 (1). pp. 205-209. ISSN 1054660X

Prihandana, Gunawan Setia; Mahardika, Muslim; Hamdi, M; Mitsui, Kimiyuki (2011) Effect of low-frequency vibration on workpiece in EDM processes. Journal of mechanical science and technology, 25 (5). pp. 1231-1234. ISSN 1738-494X

Prihandana, Gunawan Setia; Mahardika, Muslim; Hamdi, M.; Wong, Y.S.; Mitsui, Kimiyuki (2011) Accuracy improvement in nanographite powder-suspended dielectric fluid for micro-electrical discharge machining processes. The International Journal of Advanced Manufacturing Technology, 56 (1-4). pp. 143-149. ISSN 0268-3768

Prihandana, Gunawan Setia; Sriani, Tutik; Prihandana, Kei; Prihandana, Yuta; Mahardika, Muslim; Hamdi bin Abdul Shukor, M; Mitsui, Kimiyuki (2011) Study on the effect of nano and micro MoS2 powder in micro-electrical discharge machining. Advanced Materials Research, 264. pp. 1450-1455. ISSN 3037850531

Primasari, B.; Ibrahim, S.; Annuar, M.S.M.; Remmie, L.X.I. (2011) Aerobic treatment of oily wastewater: effect of aeration and sludge concentration to pollutant reduction and PHB accumulation. World Academy of Science, Engineering and Technology, 78. pp. 172-176. ISSN 2010376X (ISSN)

R

Rad, A. G.; Karim, M. R. (2011) A robust traffic quantity measurement with video surveillance. International Journal of Physical Sciences, 6 (5). pp. 962-970. ISSN 19921950

Rahbari, R.G.; Abu Kasim, N.H.; Madfa, A.A.; Hamdi, M.; Bayat, M. (2011) Porosity reduction model in titanium hydroxyapatite FGM composites using shrinkage measurement. Materials Research Innovations, 15 (Supple). s110-s113. ISSN 1432-8917

Rahman, M. M.; Parvin, S.; Saidur, R.; Rahim, N. A. (2011) Magnetohydrodynamic mixed convection in a horizontal channel with an open cavity. International Communications in Heat and Mass Transfer, 38 (2). pp. 184-193. ISSN 0735-1933

Rahman, M.M.; Billah, M.M.; Rahim, N.A.; Amin, N.; Saidur, R.; Hasanuzzaman, M. (2011) A numerical model for the simulation of double-diffusive natural convection in a right-angled triangular solar collector. International Journal of Renewable Energy Research, 1 (2). pp. 50-54. ISSN 1309-0127

Rahman, M.M.; Mamun, M.A.H.; Billah, M.M.; Rahman, S. (2011) Natural convection flow in a square cavity with internal heat generation and a flush mounted heater on a side wall. Journal of Naval Architecture and Marine Engineering, 7 (2). pp. 37-50. ISSN 2070-8998

Rahman, M.M.; Mamun, M.A.H.; Saidur, R. (2011) Analysis of magnetohydrodynamic mixed convection and joule heating in lid-driven cavity having a square block. Journal of the Chinese Institute of Engineers, 34 (5). pp. 585-599. ISSN 0253-3839

Rahman, M.M.; Oztop, H.F.; Rahim, N.A.; Saidur, R.; Al-Salem, K. (2011) Mhd mixed convection with joule heating effect in a lid-driven cavity with a heated semi-circular source using the finite element technique. Numerical Heat Transfer Part a-Applications, 60 (6). pp. 543-560. ISSN 10407782

Rahman, M.M.; Rahim, N.A.; Amin, N.; Saidur, R. (2011) A numerical model for the simulation of double-diffusive natural convection in a triangular solar collector. In: 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011, 2011, Kuala Lumpur.

Rahman, M.M.; Rahim, N.A.; Saha, S.; Billah, M.M.; Saidur, R.; Ahsan, A. (2011) Optimization of mixed convection in a lid-driven enclosure with a heat generating circular body. Numerical Heat Transfer Part a-Applications, 60 (7). pp. 629-650. ISSN 1040-7782

Rahman, M.M.; Rahim, N.A.; Saha, S.; Billah, M.M.; Saidur, R.; Ahsan, A. (2011) Optimization of mixed convection in a lid-driven enclosurewith a heat generating circular body. Numerical Heat Transfer, Part A: Applications, 60 (7). pp. 629-650. ISSN 1040-7782

Rahman, M.M.; Saidur, R.; Rahim, N.A. (2011) Conjugated effect of joule heating and magneto-hydrodynamic on double-diffusive mixed convection in a horizontal channel with an open cavity. International Journal of Heat and Mass Transfer, 54 (15-16). pp. 3201-3213. ISSN 0017-9310

Rajendran, S.; Arof, H.; Mokhtar, N.; Mubin, M.; Yegappan, S.; Ibrahim, F. (2011) Dual modality search and retrieval technique analysis for leukemic information system. Scientific Research and Essays, 6 (2). pp. 247-255. ISSN 1992-2248

Rajendran, S.; Arof, H.; Mokhtar, N.; Mubin, M.; Yegappan, S.; Ibrahim, F. (2011) Dual modality search and retrieval technique analysis for leukemic information system. Scientific Research and Essays, 6 (2). pp. 247-255. ISSN 1992-2248

Ramesh, S.; Amiriyan, M.; Meenaloshini, S.; Tolouei, R.; Hamdi, M.; Pruboloksono, J.; Teng, W.D. (2011) Densification behaviour and properties of manganese oxide doped Y-TZP ceramics. Ceramics International, 37 (8). pp. 3583-3590. ISSN 0272-8842

Ramesh, S.; Amiriyan, M.; Meenaloshini, S.; Tolouei, R.; Hamdi, M.; Pruboloksono, J.; Teng, W.D. (2011) Densification behaviour and properties of manganese oxide doped Y-TZP ceramics. Ceramics International, 37 (8). pp. 3583-3590. ISSN 0272-8842

Ramesh, S.; Tolouei, R.; Hamdi, M.; Purbolaksono, J.; Y. Tan, C.; Amiriyan, M.; D. Teng, W. (2011) Sintering behavior of nanocrystalline hydroxyapatite produced by wet chemical method. Current Nanoscience, 7 (6). pp. 845-849.

Ramesh, S.; Tolouei, R.; Hamdi, M.; Purbolaksono, J.; Y. Tan, C.; Amiriyan, M.; D. Teng, W. (2011) Sintering behavior of nanocrystalline hydroxyapatite produced by wet chemical method. Current Nanoscience, 7 (6). pp. 845-849. ISSN 1573-4137

Rashid, A.Z.; Purbolaksono, J.; Ramesh, S.; Hamdi, M.; Ahmad, A.; Tarlochan, F. (2011) Role of physical and mechanical properties of stainless steels in expected thermal fatigue life of plenum barrier plate of a gas turbine frame. Engineering Failure Analysis, 18 (8). pp. 2336-2342.

Rashid, M.M.; Rahim, N.A.; Hussain, M.A.; Rahman, M.A. (2011) Analysis and experimental study of magnetorheological-based damper for semiactive suspension system using fuzzy hybrids. IEEE Transactions on Industry Applications, 47 (2). pp. 1051-1059. ISSN 0093-9994

Razak, H. A.; Sajedi, F. (2011) The effect of heat treatment on the compressive strength of cement-slag mortars. Materials & Design, 32 (8-9). pp. 4618-4628. ISSN 0261-3069

Razavi, S.V.; Jumaat, M.Z.; Ei-Shafie, A.H. (2011) Using feed-forward back propagation (FFBP) neural networks for compressive strength prediction of lightweight concrete made with different percentage of scoria instead of sand. International Journal of Physical Sciences, 6 (6). pp. 1325-1331. ISSN 19921950

Razavi, S.V.; Jumaat, M.Z.; Ei-Shafie, A.H.; Mohammadi, P. (2011) Artificial neural networks for mechanical strength prediction of lightweight mortar. Scientific Research and Essays, 6 (16). pp. 3406-3417. ISSN 19922248

Razavi, S.V.; Jumaat, M.Z.; Ei-Shafie, A.H.; Mohammadi, P. (2011) General regression neural network (GRNN) for the first crack analysis prediction of strengthened RC one-way slab by CFRP. International Journal of Physical Sciences, 6 (10). pp. 2439-2446. ISSN 19921950

Razman, R.; Wan Abas, W.A.B.; Abu Osman, N.A.; Cheong, J.P.G. (2011) Temporal characteristics of the final delivery phase and its relation to tenpin bowling performance. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

S

Safari, A.; Mekhilef, S. (2011) Implementation of incremental conductance method with direct control. In: 2011 IEEE Region 10 Conference: Trends and Development in Converging Technology Towards 2020, TENCON 2011, Bali.

Safari, A.; Mekhilef, S. (2011) Incremental conductance MPPT method for PV systems. In: 2011 Canadian Conference on Electrical and Computer Engineering, CCECE 2011, Niagara Falls, ON.

Safari, A.; Mekhilef, S. (2011) Simulation and hardware implementation of incremental conductance MPPT with direct control method using cuk converter. IEEE Transactions on Industrial Electronics, 58 (4). pp. 1154-1161. ISSN 0278-0046

Safee, M.K.M.; Wan Abas, W.A.B.; Abu Osman, N.A.; Ibrahim, F. (2011) Activity of upper body muscles during bowing and prostration tasks in healthy subjects. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Safee, M.K.M.; Wan Abas, W.A.B.; Abu Osman, N.A.; Ibrahim, F. (2011) Activity of upper body muscles during bowing and prostration tasks in healthy subjects. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Safiuddin, M.; Alengaram, U.J.; Salam, M.A.; Jumaat, M.Z.; Jaafar, F.F.; Saad, H.B. (2011) Properties of high-workability concrete with recycled concrete aggregate. Materials Research-Ibero-American Journal of Materials, 14 (2). pp. 248-255. ISSN 1516-1439

Safiuddin, M.; Mahmud, H.B.; Jumaat, M.Z. (2011) Efficacy of ASTM saturation techniques for measuring the water absorption of concrete. Arabian Journal for Science and Engineering, 36 (5). pp. 761-768. ISSN 1319-8025

Safiuddin, M.; Md.Isa, M.H.; Jumaat, M.Z. (2011) Fresh properties of self-consolidating concrete incorporating palm oil fuel ash as a supplementary cementing material. Chiang Mai Journal of Science, 38 (3). pp. 389-404. ISSN 01252526

Safiuddin, M.; Salam, M.A.; Jumaat, M.Z. (2011) Correlations between fresh properties of self-consolidating concrete including palm oil fuel ash. In: 1st International Conference on Civil Engineering, Architecture and Building Materials, CEABM 2011, Haikou.

Safiuddin, M.; Salam, M.A.; Jumaat, M.Z. (2011) Utilization of palm oil fuel ash in concrete: a review. Journal of Civil Engineering and Management, 17 (2). pp. 234-247. ISSN 13923730

Safiuddin, M.D.; Salam, M.A.; Jumaat, M.Z. (2011) Effects of recycled concrete aggregate on the fresh properties of self-consolidating concrete. Archives of Civil and Mechanical Engineering, 11 (4). pp. 1023-1041. ISSN 16449665

Saidur, R. (2011) Energy savings and emission reductions in industrial boilers. Thermal Science, 15 (3). pp. 705-719. ISSN 0354-9836

Saidur, R.; Abdelaziz, E.A.; Demirbas, A.; Hossain, M.S.; Mekhilef, S. (2011) A review on biomass as a fuel for boilers. Renewable and Sustainable Energy Reviews, 15 (5). pp. 2262-2289. ISSN 1364-0321

Saidur, R.; Atabani, A.E.; Mekhilef, S. (2011) A review on electrical and thermal energy for industries. Renewable and Sustainable Energy Reviews, 15 (4). pp. 2073-2086. ISSN 1364-0321

Saidur, R.; Elcevvadi, E.T.; Mekhilef, S.; Safari, A.; Mohammed, H.A. (2011) An overview of different distillation methods for small scale applications. Renewable and Sustainable Energy Reviews, 15 (9). pp. 4756-4764. ISSN 1364-0321

Saidur, R.; Elcevvadi, E.T.; Mekhilef, S.; Safari, A.; Mohammed, H.A. (2011) An overview of different distillation methods for small scale applications. Renewable and Sustainable Energy Reviews, 15 (9). pp. 4756-4764. ISSN 1364-0321

Saidur, R.; Hasanuzzaman, M.; Mahlia, T.M.I.; Rahim, N.A.; Mohammed, H.A. (2011) Chillers energy consumption, energy savings and emission analysis in an institutional buildings. Energy, 36 (8). pp. 5233-5238. ISSN 0360-5442

Saidur, R.; Hossain, M.S.; Islam, M.R.; Fayaz, H.; Mohammed, H.A. (2011) A review on kiln system modeling. Renewable and Sustainable Energy Reviews, 15 (5). pp. 2487-2500. ISSN 1364-0321

Saidur, R.; Kazi, S.N.; Hossain, M.S.; Rahman, M.M.; Mohammed, H.A. (2011) A review on the performance of nanoparticles suspended with refrigerants and lubricating oils in refrigeration systems. Renewable and Sustainable Energy Reviews, 15 (1). pp. 310-323. ISSN 1364-0321

Saidur, R.; Lai, Y.K. (2011) Nanotechnology in vehicle's weight reduction and associated energy savings. Energy Education Science and Technology Part a-Energy Science and Research, 26 (2). pp. 87-101. ISSN 1308-772X

Saidur, R.; Leong, K.Y.; Mohammad, H.A. (2011) A review on applications and challenges of nanofluids. Renewable and Sustainable Energy Reviews, 15 (3). pp. 1646-1668. ISSN 13640321

Saidur, R.; Mahlia, T. M. I. (2011) Impacts of energy efficiency standard on motor energy savings and emission reductions. Clean Technologies and Environmental Policy, 13 (1). pp. 103-109. ISSN 1618-954X

Saidur, R.; Mahlia, T.M.I.; Hasanuzzaman, M. (2011) Developing energy performance standard, label and test procedures and impacts analysis for commercial chillers. Energy Education Science and Technology Part a-Energy Science and Research, 27 (1). pp. 175-190. ISSN 1308-772X

Saidur, R.; Rahim, N.A.; Islam, M.R.; Solangi, K.H. (2011) Environmental impact of wind energy. Renewable and Sustainable Energy Reviews, 15 (5). pp. 2423-2430. ISSN 1364-0321

Saifizul, A.A.; Yamanaka, H.; Karim, M.R. (2011) Empirical analysis of gross vehicle weight and free flow speed and consideration on its relation with differential speed limit. Accid Anal Prev, 43 (3). pp. 1068-1073. ISSN 0001-4575

Saiful Islam, A.B.M.; Jameel, M.; Ahmad, S.I.; Jumaat, M.Z. (2011) Study on corollary of seismic base isolation system on buildings with soft storey. International Journal of Physical Sciences, 6 (11). pp. 2654-2661. ISSN 19921950

Saiful Islam, A.B.M.; Jameel, M.; Jumaat, M.Z. (2011) Effect of time elapse after wave hitting on coupled spar platform. International Journal of Physical Sciences, 6 (11). pp. 2671-2680. ISSN 19921950

Saiful Islam, A.B.M.; Jameel, M.; Rahman, M.A.; Jumaat, M.Z. (2011) Earthquake time history for Dhaka, Bangladesh as competent seismic record. International Journal of Physical Sciences, 6 (16). pp. 3921-3926. ISSN 19921950

Saiful Islam., A.B.M.; Jameel, M.; Jumaat, M.Z.; Shirazi, S.M. (2011) Spar platform at deep water region in Malaysian sea. International Journal of Physical Sciences, 6 (30). pp. 6872-6881. ISSN 19921950

Sairi, N.A.; Yusoff, R.; Alias, Y.; Aroua, M.K. (2011) Solubilities of CO 2 in aqueous N-methyldiethanolamine and guanidinium trifluoromethanesulfonate ionic liquid systems at elevated pressures. Fluid Phase Equilibria, 300 (1-2). pp. 89-94. ISSN 03783812

Sairi, N.A.; Yusoff, R.; Alias, Y.; Aroua, M.K. (2011) Solubilities of CO2 in aqueous N-methyldiethanolamine and guanidinium trifluoromethanesulfonate ionic liquid systems at elevated pressures. Fluid Phase Equilibria, 300 (1-2). pp. 89-94. ISSN 0378-3812

Sajedi, F.; Razak, H.A. (2011) Comparison of different methods for activation of ordinary Portland cement-slag mortars. Construction and Building Materials, 25 (1). pp. 30-38. ISSN 0950-0618

Sajedi, F.; Razak, H.A. (2011) Effects of curing regimes and cement fineness on the compressive strength of ordinary Portland cement mortars. Construction and Building Materials, 25 (4). pp. 2036-2045. ISSN 0950-0618

Sajedi, F.; Razak, H.A. (2011) Effects of thermal and mechanical activation methods on compressive strength of ordinary Portland cement-slag mortar. Materials & Design, 32 (2). pp. 984-995. ISSN 0261-3069

Saleem, M.; Chakrabarti, M.H.; Irfan, M.F.; Hajimolana, S.A.; Hussain, M.A.; Diya'uddeen, B.H.; Daud, W.M.A.W. (2011) Electrokinetic remediation of nickel from low permeability soil. International Journal of Electrochemical Science, 6 (9). pp. 4264-4275. ISSN 1452-3981

Salehi, M; Bahreininejad, A.; Nakhai, I (2011) On-line analysis of out-of-control signals in multivariate manufacturing processes using a hybrid learning-based model. Neurocomputing, 74 (12-13). pp. 2083-2095. ISSN 0925-2312

Salehi, M.; Bahreininejad, A.; Nakhai, I. (2011) On-line analysis of out-of-control signals in multivariate manufacturing processes using a hybrid learning-based model. Neurocomputing, 74 (12-13). pp. 2083-2095. ISSN 0925-2312

Samsudin, S.S.; Mokhtar, N.; Arof, H.; Ibrahim, F.; Iwahashi, M. (2011) Blind user indoor environment mapping system for self-localization. In: 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011, 2011, Xi'an.

Sankar, U.; Satgunam, M.; Amiriyan, M.; Singh, R.; Teng, W.D. (2011) Sintering and densification behavior of ZnO-doped Y-TZP ceramics. Applied Mechanics and Materials, 83. pp. 197-203. ISSN 3037852216

Sarhan, A.A.D.; El-Zahry, R.M. (2011) Monitoring of tool wear and surface roughness in end milling for intelligent machining. International Journal of the Physical Sciences, 6 (10). pp. 2380-2392. ISSN 1992 - 1950

Sarhan, A.A.D.; Hassan, M.A.; Matsubara, A.; Hamdi, M. (2011) Compensation of machine tool spindle error motions in the radial direction for accurate monitoring of cutting forces utilizing sensitive displacement sensors. In: Proceedings of the World Congress on Engineering, 2011, London.

Sarhan, A.A.D.; Matsubara, A.; Hassan, M.A. (2011) High-precision machining by measuring and compensating the error motion of spindleâs axis of rotation in radial direction. Electrical Engineering and Intelligent Systems. pp. 347-359.

Sarhan, Ahmed AD; Matsubara, Atsushi (2011) Compensation method of the machine tool spindle thermal displacement for accurate monitoring of cutting forces. Materials and Manufacturing Processes, 26 (12). pp. 1511-1521.

Sarmani, A.R.; Sheih, S.J.; Adikan, F.R.M.; Mahdi, M.A. (2011) Spectral hole burning effects initiated by uniform signal intensities in a gain-flattened EDFA. Chinese Optics Letters, 9 (2). ISSN 1671-7694

Sayuti, M.; Sarhan, M.; Diaa, A.A.; Hamdi, M. (2011) Optimizing the machining parameters in glass grinding operation on the CNC milling machine for best surface roughness. Advanced Materials Research, 154. pp. 721-726. ISSN 0878492046

Sayuti, Mohd; Sarhan, Mohammed; Diaa, Ahmed Aly; Hamdi, Mohd (2011) Optimizing the machining parameters in glass grinding operation on the CNC milling machine for best surface roughness. Advanced Materials Research, 154-15. pp. 721-726. ISSN 0878492046

Seyedzadeh Kharazi, S.M.S.; Amouzad Mahdiraji, G.; Sahbudin, R.K.Z.; Mokhtar, M.; Abas, A.F.; Anas, S.B.A. (2011) Performance analysis of a variable-weight OCDMA system under the impact of fiber impairments. In: Photonics (ICP), 2011 IEEE 2nd International Conference on, 2011.

Shafigh, P.; Jumaat, M.Z.; Bin Mahmud, H.; Alengaram, U.J. (2011) A new method of producing high strength oil palm shell lightweight concrete. Materials and Design, 32 (10). pp. 4839-4843. ISSN 0261-3069

Shafigh, P.; Jumaat, M.Z.; Mahmud, H. (2011) Oil palm shell as a lightweight aggregate for production high strength lightweight concrete. Construction and Building Materials, 25 (4). pp. 1848-1853. ISSN 0950-0618

Shafigh, P.; Jumaat, M.Z.; Mahmud, H.B.; Alengaram, U.J. (2011) A new method of producing high strength oil palm shell lightweight concrete. Materials & Design, 32 (10). pp. 4839-4843. ISSN 0261-3069

Shafigh, P.; Mahmud, H.; Jumaat, M.Z. (2011) Effect of steel fiber on the mechanical properties of oil palm shell lightweight concrete. Materials & Design, 32 (7). pp. 3926-3932. ISSN 0261-3069

Shahariari, A.; Mokhlies, H.; Bin Abu Bakar, A.H.; Karimi, M. (2011) The numerical estimation method of series FACTS compensator based on injection model of voltage source inverter. In: Industrial Electronics and Applications (ISIEA), 2011 IEEE Symposium on, 2011, Langkawi, Malaysia.

Shamiri, A.; Hussain, M.A.; Mjalli, F.S. (2011) Two phase dynamic model for gas phase propylene copolymerization in fluidized bed reactor. In: 6th International Conference on Diffusion in Solids and Liquids, DSL-2010, 2011, Paris.

Shamiri, A.; Hussain, M.A.; Mjalli, F.S.; Mostoufi, N.; Shafeeyan, M.S. (2011) Dynamic modeling of gas phase propylene homopolymerization in fluidized bed reactors. Chemical Engineering Science. pp. 1189-1199.

Shekarchian, M.; Moghavvemi, M.; Mahlia, T.M.I.; Mazandarani, A. (2011) A review on the pattern of electricity generation and emission in Malaysia from 1976 to 2008. Renewable and Sustainable Energy Reviews, 15 (6). pp. 2629-2642. ISSN 13640321

Shirazi, SM; Sholichin, M; Jameel, Mohammed; Akib, Shatirah; Azizi, Mokhtar (2011) Effects of different irrigation regimes and nitrogenous fertilizer on yield and growth parameters of maize. International Journal of Physical Sciences, 6 (4). pp. 677-683. ISSN 1992-1950

Sing, W.L.; Hashim, R.; Ali, F. (2011) Effect of binder and silica sand on unconfined compressive strength of cemented peat. International Journal of Physical Sciences, 6 (13). pp. 3047-3053. ISSN 19921950

Sivakumar, S.; Ramesh, S.; Chin, K.L.; Tan, C.Y.; Teng, W.D. (2011) Effect of sintering profiles on the properties and ageing resistance of Y-TZP ceramic. International Journal of Automotive and Mechanical Engineering (IJAME), 4. pp. 405-413. ISSN 2180-1606

Solangi, K.H.; Islam, M.R.; Saidur, R.; Rahim, N.A.; Fayaz, H. (2011) A review on global solar energy policy. Renewable and Sustainable Energy Reviews, 15 (4). pp. 2149-2163. ISSN 1364-0321

Solangi, K.H.; Lwin, T.N.W.; Rahim, N.A.; Hossain, M.S.; Saidur, R.; Fayaz, H. (2011) Development of solar energy and present policies in Malaysia. In: 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011, 2011, Kuala Lumpur.

Sopyan, I.; Nawawi, N.A.; Shah, Q.H.; Ramesh, S.; Tan, C.Y.; Hamdi, M (2011) Sintering and properties of dense manganese-doped calcium phosphate bioceramics prepared using sol-gel derived nanopowders. Materials and Manufacturing Processes, 26 (7). pp. 908-914. ISSN 1042-6914

Sopyan, I.; Ramesh, S.; Nawawi, N.A.; Tampieri, A.; Sprio, S. (2011) Effects of manganese doping on properties of sol gel derived biphasic calcium phosphate ceramics. Ceramics International, 37 (8). pp. 3703-3715.

T

Taha, Z.; Tang, Y.R.; Yap, K.C. (2011) Development of an onboard system for flight data collection of a small-scale UAV helicopter. Mechatronics, 21 (1). pp. 132-144. ISSN 0957-4158

Tajul Baharuddin, M.F.; Taib, S.; Hashim, R.; Zainal Abidin, M.H.; Ishak, M.F. (2011) Time-lapse resistivity investigation of salinity changes at an ex-promontory land: a case study of Carey Island, Selangor, Malaysia. Environmental Monitoring and Assessment, 180 (1-4). pp. 345-369. ISSN 01676369

Tamin, N.M.; Zakaria, R.; Hashim, R.; Yin, Y. (2011) Establishment of Avicennia marina mangroves on accreting coastline at Sungai Haji Dorani, Selangor, Malaysia. Estuarine, Coastal and Shelf Science, 94 (4). pp. 334-342. ISSN 02727714

Tan, K.T.; Abdul Razak, H. (2011) Assessment of risk to school buildings resulting from distant earthquakes. In: 12th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC12, 2011, Hong Kong.

Tarlochan, F.; Ramesh, S. (2011) Composite sandwich structures with nested inserts for energy absorption application. Composite Structures.

Tay, S.L.; Haseeb, A.S.M.A.; Johan, M.R. (2011) Addition of cobalt nanoparticles into Sn-3.8Ag-0.7Cu lead-free solder by paste mixing. Soldering & Surface Mount Technology, 23 (1). pp. 10-14. ISSN 0954-0911

Tham, L.K.; Abu Osman, N.A.; Lim, K.S.; Pingguan-Murphy, B.; Abas, W.A.B.W.; Zain, N.M. (2011) Investigation to predict patellar tendon reflex using motion analysis technique. Medical Engineering & Physics, 33 (4). pp. 407-410. ISSN 1350-4533

Tham, L.K.; Abu Osman, N.A.; Lim, K.S.; Pingguan-Murphy, B.; Wan Abas, W.A.B. (2011) Quantification of patellar tendon reflex by motion analysis. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Thio, T.; Nozari, A.A.; Soin, N.; Kahar, M.K.B.A.; Dawal, S.Z.M.; Samra, K.A.; Madou, M.; Ibrahim, F. (2011) Hybrid capillary-flap valve for vapor control in point-of-care microfluidic CD. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Thirugnanasambandam, M.; Hasanuzzaman, M.; Saidur, R.; Ali, M.B.; Rajakarunakaran, S.; Devaraj, D.; Rahim, N.A. (2011) Analysis of electrical motors load factors and energy savings in an Indian cement industry. Energy, 36 (7). pp. 4307-4314. ISSN 0360-5442

Tolouei, R.; Ramesh, S.; Tan, C.Y.; Amiriyan, M.; Teng, W.D. (2011) Sintering effects on the densification of nanocrystalline hydroxyapatite. Science. ISSN 1095-9203

Tolouei, R.; Singh, R.; Sopyan, I.; Yong, T.C.; Amiriyan, M.; Dung, T.W. (2011) Dependence of the fracture toughness on the sintering time of dense hydroxyapatite bioceramics. Materials Science Forum, 694 . International Conference on Frontier of Nanoscience and Technology (ICFNST 2011), pp. 391-395.

Tolouei, R.; Singh, R.; Tan, C.Y.; Amiriyan, M.; Teng, W.D. (2011) Effect of grain size on vickers microhardness and fracture toughness in calcium phosphate bioceramics. Applied Mechanics and Materials, 83. pp. 237-243.

Tsukiyama, D.; Fukuda, Y.; Miyake, S.; Mekhilef, S.; Kwon, S. K.; Nakaoka, M. (2011) A new 98 soft-switching full-bridge DC-DC converter based on secondary-side LC resonant principle for PV generation systems. In: 2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011, Singapore.

U

Usman, J.; McIntosh, A.S.; Fréchède, B. (2011) An investigation of shoulder forces in active shoulder tackles in rugby union football. Journal of Science and Medicine in Sport, 14 (6). pp. 547-552. ISSN 1440-2440

V

Varman, M.; Saka, S. (2011) A comparative study of oil palm and Japanese beech on their fractionation and characterization as treated by supercritical water. Waste and Biomass Valorization, 2 (3). pp. 309-315. ISSN 1877-2641

W

Wazed, M.A.; Ahmed, S; Nukman, Y (2011) Application of Taguchi Method to analyze the impacts of commonality in multistage production under uncertainty. Advanced Science Letters, 4 (2). pp. 415-423. ISSN 1936-6612

Wazed, M.A.; Ahmed, S. (2011) Extraction of fuel from municipality solid wastes using an updraft gasifier. International Journal of Renewable Energy Technology, 2 (2). pp. 105-119. ISSN 1757-3971

Wazed, M.A.; Ahmed, S.; Nukman, Y. (2011) Application of Taguchi method to analyse the impacts of common process and batch size in multistage production system under uncertain conditions. European Journal of Industrial Engineering, 5 (2). pp. 215-231. ISSN 1751-5254

Wee, L.L.; Annuar, M.S.B.M.; Ibrahim, S. (2011) Short communication: energetics of glucoamylase-catalyzed hydrolysis of commercial sago starch. Asia-Pacific Journal of Molecular Biology and Biotechnology, 19 (4). pp. 117-120. ISSN 01287451

Wee, L.L.; Annuar, M.S.M.; Ibrahim, S.; Chisti, Y. (2011) Enzyme-mediated production of sugars from sago starch: statistical process optimization. Chemical Engineering Communications, 198 (11). pp. 1339-1353. ISSN 0098-6445

Wong, L.S.; Hashim, R.; Ali, F. (2011) Unconfined compressive strength characteristics of stabilized peat. Scientific Research and Essays, 6 (9). pp. 1915-1921. ISSN 19922248

Y

Yaghmaie, M.; Bahreininejad, A. (2011) A context-aware adaptive learning system using agents. Expert Systems With Applications, 38 (4). pp. 3280-3286. ISSN 0957-4174

Yahya, S.; Moghavvemi, M.; Mohamed, H.A.F. (2011) Geometrical approach of planar hyper-redundant manipulators: inverse kinematics, path planning and workspace. Simulation Modelling Practice and Theory, 19 (1). pp. 406-422. ISSN 1569190X

Yahya, S.; Moghavvemi, M.; Mohamed, H.A.F. (2011) Redundant manipulators kinematics inversion. Scientific Research and Essays, 6 (26). pp. 5462-5470. ISSN 19922248

Younis, M.A.A.; Rahim, N.A.; Mekhilef, S. (2011) DSP controlled isolated DC-DC converter for distributed generation system. International Review of Electrical Engineering, 6 (4). pp. 1570-1580. ISSN 18276660

Younis, M.A.A.; Rahim, N.A.; Mekhilef, S. (2011) Simulation of grid connected THIPWM-three-phase inverter using SIMULINK. In: 2011 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2011, Langkawi.

Yusoff, N.; Abu Osman, N.A.; Pingguan-Murphy, B. (2011) Design and validation of a bi-axial loading bioreactor for mechanical stimulation of engineered cartilage. Medical Engineering & Physics, 33 (6). pp. 782-788. ISSN 1350-4533

This list was generated on Tue Dec 23 06:10:16 2014 MYT.