Number of items: 127.
A
Abdelaziz, E.A.; Saidur, R.; Mekhilef, S. (2011) A review on energy saving strategies in industrial sector. Renewable and Sustainable Energy Reviews, 15 (1). pp. 150-168. ISSN 1364-0321
Abu Bakar, M.H.; Sheih, S.J.; Adikan, F.R.M.; Mahdi, M.A. (2011) Variable gain-flattened L-band erbium-doped fiber amplifier. Laser Physics, 21 (9). pp. 1638-1644. ISSN 1054-660X
Aghamohammadi, N.; Sulaiman, N.M.N.; Aroua, M.K. (2011) Combustion characteristics of biomass in SouthEast Asia. Biomass & Bioenergy, 35 (9). 3884-3890 . ISSN 0961-9534
Ahamed, J.U.; Saidur, R.; Masjuki, H.H.; Mekhilef, S.; Ali, M.B.; Furqon, M.H. (2011) An application of energy and exergy analysis in agricultural sector of Malaysia. Energy Policy, 39 (12). pp. 7922-7929. ISSN 0301-4215
Al-Asadi, H.A.; Bakar, A.A.A.; Adikan, F.R.M.; Mahdi, M.A. (2011) Analytical study of nonlinear phase shift through stimulated Brillouin scattering in single mode fiber with the pump power recycling technique. Journal of Optics, 13 (10). ISSN 2040-8978
Ale Ebrahim, N.; Abdul Rashid, S.H.; Ahmed, S.; Taha, Z. (2011) The effectiveness of virtual R&D teams in SMEs: experiences of Malaysian SMEs. Industrial Engineering and Management Systems, 10 (2). pp. 109-114. ISSN 1598-7248
Ale Ebrahim, N.; Ahmed, S.; Abdul Rashid, S.H.; Taha, Z. (2011) Virtual collaborative R&D teams in Malaysia manufacturing SMEs. In: 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011), February 26-28, Hotel Royal, Singapore.
Alengaram, U.J.; Mahmud, H.; Jumaat, M.Z. (2011) Enhancement and prediction of modulus of elasticity of palm kernel shell concrete. Materials & Design, 32 (4). pp. 2143-2148. ISSN 0261-3069
Amiri-Khorasani, M.; Abu Osman, N.A.; Yusof, A. (2011) Acute effect of static and dynamic stretching on hip dynamic range of motion during instep kicking in professional soccer players. Journal of Strength and Conditioning Research, 25 (6). pp. 1647-1652. ISSN 1064-8011
Amiri-Khorasani, M.; Abu Osman, N.A.; Yusof, A. (2011) Biomechanical responses of thigh and lower leg during 10 consecutive soccer instep kicks. Journal of Strength and Conditioning Research, 25 (4). pp. 1177-1181. ISSN 1064-8011
Arafat, M. M.; Haseeb, A. S. M. A.; Johan, M. R. (2011) Interfacial reaction and dissolution behavior of Cu substrate in molten Sn-3.8Ag-0.7Cu in the presence of Mo nanoparticles. Soldering & Surface Mount Technology, 23 (3). pp. 140-149. ISSN 0954-0911
Atadashi, I.M.; Aroua, M.K.; Aziz, A.R.A.; Sulaiman, N.M.N. (2011) Membrane biodiesel production and refining technology: a critical review. Renewable & Sustainable Energy Reviews, 15 (9). pp. 5051-5062.
Atadashi, I.M.; Aroua, M.K.; Aziz, A.R.A.; Sulaiman, N.M.N. (2011) Refining technologies for the purification of crude biodiesel. Applied Energy, 88 (12). pp. 4239-4251. ISSN 0306-2619
B
Baroutian, S.; Aroua, M.K.; Raman, A.A.A.; Sulaiman, N.M.N. (2011) A packed bed membrane reactor for production of biodiesel using activated carbon supported catalyst. Bioresource Technology, 102 (2). pp. 1095-1102. ISSN 0960-8524
C
Chai, A.B.; Andriyana, A.; Verron, E.; Johan, M.R.; Haseeb, A.S.M.A. (2011) Development of a compression test device for investigating interaction between diffusion of biodiesel and large deformation in rubber. Polymer Testing, 30 (8). pp. 867-875. ISSN 0142-9418
Chan, C.H.; Yusoff, R.; Ngoh, G.C.; Kung, F.W. (2011) Microwave-assisted extractions of active ingredients from plants. Journal of Chromatography A, 1218 (37). pp. 6213-6225. ISSN 0021-9673
D
Dhakshyani, R.; Nukman, Y.; Abu Osman, N.A.; Vijay, C. (2011) Preliminary report: rapid prototyping models for Dysplastic hip surgery. Central European Journal of Medicine, 6 (3). pp. 266-270. ISSN 1895-1058
Diya'Uddeen, B.H.; Daud, W.M.A.W.; Abdul Aziz, A.R. (2011) Treatment technologies for petroleum refinery effluents: a review. Process Safety and Environmental Protection, 89 (2). pp. 95-105. ISSN 09575820 (ISSN)
Doufesh, H; Faisal , T; Lim, K S; Ibrahim, F (2011) EEG Spectral Analysis on Muslim Prayers. Applied Psychophysiology and Biofeedback.
E
Eshraghi, A.; Gholizadeh, H.; Abu Osman, N.A. (2011) Comments on "assessment of amputee socket-stump-residual bone kinematics during strenuous activities using Dynamic Roentgen stereogrammetric analysis". Journal of Biomechanics, 44 (16). pp. 2851-2852. ISSN 0021-9290
F
Far, M.R.H.; Jumaat, M.Z.; Vahid Razavi T, S.; Mohammadi, P.; Mohammadi, H. (2011) Nonlinear analysis of load-deflection testing of reinforced one-way slab strengthened by carbon fiber reinforced polymer (CFRP) and using artificial neural network (ANN) for prediction. International Journal of Physical Sciences, 6 (13). pp. 3054-3061. ISSN 19921950
Fatoyinbo, H.O.; Kadri, N.A.; Gould, D.H.; Hoettges, K.F.; Labeed, F.H. (2011) Real-time cell electrophysiology using a multi-channel dielectrophoretic-dot microelectrode array. Electrophoresis, 32 (18). pp. 2541-2549. ISSN 01730835 (ISSN)
Fazal, M.A.; Haseeb, A.S.M.A.; Masjuki, H.H. (2011) Effect of different corrosion inhibitors on the corrosion of cast iron in palm biodiesel. Fuel Processing Technology, 92 (11). pp. 2154-2159. ISSN 0378-3820
Fazal, M.A.; Haseeb, A.S.M.A.; Masjuki, H.H. (2011) Effect of temperature on the corrosion behavior of mild steel upon exposure to palm biodiesel. Energy, 36 (5). pp. 3328-3334. ISSN 0360-5442
G
Ghazali, M.; Kadri, N.A. (2011) Preliminary investigation of tensile properties of welded type I collagen to be used as surgical sealant. International Journal of Physical Sciences, 6 (36). pp. 8057-8062. ISSN 19921950 (ISSN)
Gholizadeh, H.; Abu Osman, N. A.; Luviksdottir, A.; Eshraghi, A.; Kamyab, M.; Abas, W. (2011) A new approach for the pistoning measurement in transtibial prosthesis. Prosthetics and Orthotics International, 35 (4). pp. 360-364. ISSN 0309-3646
Gholizadeh, H.; Osman, N.A.A.; Kamyab, M.; Eshraghi, A.; Abas, W.A.B.W.; Azam, M.N. (2011) Transtibial prosthetic socket pistoning: Static evaluation of Seal-In(®) X5 and Dermo(®) Liner using motion analysis system. Clinical Biomechanics (Bristol, Avon). ISSN 1879-1271
Goyal , R.K.; Jayakumar , N.S.; Hashim , M.A. (2011) Emulsion stabilization using ionic liquid [BMIM](+)[NTf(2)](-) and performance evaluation on the extraction of chromium. Journal of Hazardous Materials.
H
Haider, H.A.M.; Yusoff, R.; Aroua, M.K. (2011) Equilibrium solubility of carbon dioxide in 2(methylamino)ethanol. Fluid Phase Equilibria, 303 (2). pp. 162-167. ISSN 0378-3812
Hamah-Ali, B.; Ali, B.S.; Yusoff, R.; Aroua, M.K. (2011) Corrosion of carbon steel in aqueous carbonated solution of MEA/bmimDCA. International Journal of Electrochemical Science, 6. pp. 181-198. ISSN 1452-3981
Hambali, A; Sapuan , SM; Rahim , AS; Ismail, N; Nukman, Y (2011) Concurrent Decisions on Design Concept and Material Using Analytical Hierarchy Process at the Conceptual Design Stage. Concurrent Engineering-Research and Application, 19 (2). pp. 111-121. ISSN 1063-293X
Hambali, A.; Sapuan, S.M.; Rahim, A.S.; Ismail, N.; Nukman, Y. (2011) Concurrent decisions on design concept and material using analytical hierarchy process at the conceptual design stage. Concurrent Engineering-Research and Applications, 19 (2). pp. 111-121. ISSN 1063-293X
Hasan, D.B.; Abdul Aziz, A.R.; Daud, W.M.A.W. (2011) Application of response surface methodology in process parameters optimization for phenol mineralization using Fenton's peroxidation. African Journal of Biotechnology, 10 (50). pp. 10218-10231. ISSN 16845315 (ISSN)
Hasan, M.M.; Haseeb, A.S.M.A.; Masjuki, H.H. (2011) Intermixing of metal oxide/Ag/metal oxide nanoscale multilayers prepared by rf reactive magnetron sputtering. Surface Engineering, 27 (5). pp. 382-388. ISSN 0267-0844
Haseeb, A.S.M.A. (2011) Implementation of micro-level problem based learning in a course on electronic materials. Journal of Materials Education, 33 (5-6). pp. 273-282. ISSN 0738-7989
Haseeb, A.S.M.A.; Chew, C.S.; Johan, M.R. (2011) Interfacial reactions between Sn-3.5 Ag solder and Ni-W alloy films. Journal of Materials Science-Materials in Electronics, 22 (9). pp. 1372-1377. ISSN 0957-4522
Haseeb, A.S.M.A.; Jun, T.S.; Fazal, M.A.; Masjuki, H.H. (2011) Degradation of physical properties of different elastomers upon exposure to palm biodiesel. Energy, 36 (3). pp. 1814-1819.
Haseeb, A.S.M.A.; Leng, T.S. (2011) Effects of Co nanoparticle addition to Sn-3.8Ag-0.7Cu solder on interfacial structure after reflow and ageing. Intermetallics, 19 (5). pp. 707-712. ISSN 0966-9795
Hashim , M.A.; Mukhopadhyay , S.; Sahu , J.N.; Sengupta , B. (2011) Remediation technologies for heavy metal contaminated groundwater. Journal of Environmental Management, 92 (10). ISSN 03014797
Hassan, M.R.A.; Tamchek, N.; Abas, A.F.; Johar, R.M.; Adikan, F.R.M. (2011) Dual-phase sensing for early detection of prepreg structural failures via etched cladding Bragg grating. Sensors and Actuators A Physical, 171 (2). pp. 126-130. ISSN 0924-4247
I
Illias, H.A.; Chen, G.; Lewin, P. (2011) Partial discharge behavior within a spherical cavity in a solid dielectric material as a function of frequency and amplitude of the applied voltage. IEEE Transactions on Dielectrics and Electrical Insulation, 18 (2). pp. 432-443. ISSN 1070-9878
Iqbal, S.M.A.; Mekhilef, S.; Soin, N.; Omar, R. (2011) Buck and boost converter design optimization parameters in modern VLSI technology. In: 12th International Conference and Seminar on Micro/Nanotechnologies and Electron Devices, EDM'2011, Erlagol, Altai.
Iqbal, S.M.A.; Mekhilef, S.; Soin, N.; Omar, R. (2011) Dc-Dc buck and boost converter design issues in recent VLSI platform. In: 2011 IEEE Regional Symposium on Micro and Nano Electronics, RSM 2011, Kota Kinabalu, Sabah.
Islam, A.; Jameel, M.; Ahmad, SI; Salman, FA; Jumaat, M.Z. (2011) Engendering earthquake response spectra for Dhaka region usable in dynamic analysis of structures. Scientific Research and Essays, 6 (16). pp. 3519-3530. ISSN 1992-2248
Islam, A.; Jameel, M.; Jumaat, M.Z. (2011) Seismic isolation in buildings to be a practical reality: behavior of structure and installation technique. Journal of Engineering and Technology Research, 3 (4). pp. 99-117. ISSN 2006-9790
Islam, M.S.; Yusoff, R.; Ali, B.S.; Islam, M.N.; Chakrabarti, M.H. (2011) Degradation studies of amines and alkanolamines during sour gas treatment process. International Journal of Physical Sciences, 6 (25). pp. 5883-5896. ISSN 19921950
Ismail, M.A.; Tamchek, N.; Abu Hassan, M.R.; Dambul, K.D.; Selvaraj, J.; Abd Rahim, N.; Sandoghchi, S.R.; Adikan, F.R.M. (2011) A fiber bragg grating-bimetal temperature sensor for solar panel inverters. Sensors, 11 (9). pp. 8665-8673. ISSN 1424-8220
J
Johnson Alengaram, U.; Jumaat, M.Z.; Mahmud, H.; Fayyadh, M.M. (2011) Shear behaviour of reinforced palm kernel shell concrete beams. Construction and Building Materials, 25 (6). pp. 2918-2927. ISSN 09500618
Jumaat, M.Z.; Alam, M.A. (2011) Optimization of intermediate anchors to eliminate premature shear failure of CFRP laminate flexurally strengthened R.C beams. International Journal of Physical Sciences, 6 (2). pp. 182-192. ISSN 19921950
Jumaat, M.Z.; Rahman, M.A.; Alam, M.A.; Rahman, M.M. (2011) Premature failures in plate bonded strengthened RC beams with an emphasis on premature shear: a review. International Journal of Physical Sciences, 6 (2). pp. 156-168. ISSN 19921950
Jumaat, M.Z.; Rahman, M.M.; Rahman, M.A. (2011) Review on bonding techniques of CFRP in strengthening concrete structures. International Journal of Physical Sciences, 6 (15). pp. 3567-3575. ISSN 19921950
K
Kadri, N.A.; Raha, M.G.; Murphy, B.P. (2011) Polyvinyl alcohol as a viable membrane in artificial tissue design and development. Clinics, 66 (8). pp. 1489-1493. ISSN 18075932 (ISSN)
Khalaj-Amirhosseini, M; Moghavvemi, M; Ameri, H (2011) Multifrequency Wilkinson Power Divider Using Microstrip Nonuniform Transmission Lines. International Journal of RF and Microwave Computer-Aided Engineering, 21 (3). pp. 295-299. ISSN 1096-4290
Khalil, M.; Jan, B.M.; Raman, A.A.A. (2011) Rheological and statistical evaluation of nontraditional lightweight completion fluid and its dependence on temperature. Journal of Petroleum Science and Engineering, 77 (1). pp. 27-33. ISSN 0920-4105
Kobraei, M.; Jumaat, M.Z.; Shafigh, P. (2011) An experimental study on shear reinforcement in RC beams using CFRP-bars. Scientific Research and Essays, 6 (16). pp. 3447-3460. ISSN 19922248
Kong, P.S.; Aroua, M.K.; Ir, A.A.R. (2011) Kinetics study of Esterification Reaction of 2-Methyl-4-Chlorophenoxyacetic acid (MCPA Acid). International Journal of Chemical Reactor Engineering, 9. ISSN 1542-6580
L
Liza, S.; Haseeb, A.S.M.A.; Abbas, A.A.; Masjuki, H.H. (2011) Failure analysis of retrieved UHMWPE tibial insert in total knee replacement. Engineering Failure Analysis, 18 (6). pp. 1415-1423. ISSN 1350-6307
M
Mahlia, T.M.I.; Razak, H. Abdul; Nursahida, M.A. (2011) Life cycle cost analysis and payback period of lighting retrofit at the University of Malaya. Renewable and Sustainable Energy Reviews, 15 (2). pp. 1125-1132. ISSN 13640321
Mahmoodian, Reza; Rahbari, Reza; Hamdi, Mohammad (2011) Safety issues improvement in ceramic lined composite pipe produced using SHS method. In: 2011 International Conference on Industrial Engineering and Operations Management , January 22 – 24, 2011, Kuala Lumpur, Malaysia.
Mahmoud, S.S.; Jusoff, K.; Li, K. (2011) Effective induction motor controller based Voltage/frequency. In: International Conference on Electronic Computer Technology , FEB 20-22, 2009, Macau.
Matsumoto, T.; Takahashi, T.; Iwahashi, M.; Kimura, T.; Salbiah, S.; Mokhtar, N. (2011) Visual compensation in localization of a robot on a ceiling map. Scientific Research and Essays, 6 (1). pp. 131-135. ISSN 1992-2248
Mekhilef, S. (2011) Three phase hybrid multilevel inverter control using vector transformation. In: 2011 Canadian Conference on Electrical and Computer Engineering, CCECE 2011, Niagara Falls, ON.
Mekhilef, S.; Chandrasegaran, D. (2011) Assessment of off-shore wind farms in Malaysia. In: 2011 IEEE Region 10 Conference: Trends and Development in Converging Technology Towards 2020, TENCON 2011, Bali.
Mekhilef, S.; Kadir, M.N.A. (2011) Novel vector control method for three-stage hybrid cascaded multilevel inverter. Ieee Transactions on Industrial Electronics, 58 (4). pp. 1339-1349. ISSN 0278-0046
Mekhilef, S.; Saidur, R.; Safari, A. (2011) A review on solar energy use in industries. Renewable and Sustainable Energy Reviews, 15 (4). pp. 1777-1790. ISSN 1364-0321
Mekhilef, S.; Saidur, R.; Safari, A.; Mustaffa, W.E.S.B. (2011) Biomass energy in Malaysia: current state and prospects. Renewable and Sustainable Energy Reviews, 15 (7). pp. 3360-3370. ISSN 1364-0321
Mekhilef, S.; Siga, S.; Saidur, R. (2011) A review on palm oil biodiesel as a source of renewable fuel. Renewable and Sustainable Energy Reviews, 15 (4). pp. 1937-1949. ISSN 1364-0321
Mekhilef, S.; Tarek, M.; Abd. Rahim, N. (2011) Single-phase hybrid active power filter with adaptive notch filter for harmonic current estimation. IETE Journal of Research, 57 (1). pp. 20-28. ISSN 0377-2063
Menshawi, K.M.; Abdulkader, M.N.; Mekhilef, S. (2011) Voltage vector approximation control of multistage - Multilevel inverter using simplified logic implementation. In: 2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011, Singapore.
Menshawi, M.K.; Kadir, M.N.A.; Mekhilef, S. (2011) Two-dimensional hysteresis comparators to control multistage inverters with maximum number of levels. In: 8th International Conference on Power Electronics - ECCE Asia: "Green World with Power Electronics", ICPE 2011-ECCE Asia, Jeju.
Mohamed Saaid, M.F.; Wan Abas, W.A.B.; Aroff, H.; Mokhtar, N.; Ramli, R.; Ibrahim, Z. (2011) Change point detection of EEG signals based on particle swarm optimization. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.
Mohammad, M.; Jumaat, M.Z.; Chemrouk, M.; Ghasemi, A.; Hakim, S.J.S.; Najmeh, R. (2011) An experimental investigation of the stress-strain distribution in high strength concrete deep beams. In: 12th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC12, 2011, Hong Kong.
Mohammadhassani, M.; Jumaat, M.Z.; Ashour, A.; Jameel, M. (2011) Failure modes and serviceability of high strength self compacting concrete deep beams. Engineering Failure Analysis, 18 (8). pp. 2272-2281. ISSN 1350-6307
Mohammadhassani, M.; Jumaat, M.Z.; Chemrouk, M.; Maghsoudi, A.A.; Jameel, M.; Akib, S. (2011) An experimental investigation on bending stiffness and neutral axis depth variation of over-reinforced high strength concrete beams. Nuclear Engineering and Design, 241 (6). pp. 2060-2067. ISSN 0029-5493
Mohammadhassani, M.; Jumaat, M.Z.; Maghsoudi, A.A.; Akib, S.; Mohamed, J.; Najmeh, R.; Amin, M.; Hamid, S.; Esmaeil, H.R.; Farhad, G. (2011) Bending stiffness and neutral axis depth variation of high strength concrete beams in seismic hazardous areas: experimental investigation. International Journal of the Physical Sciences, 6 (3). pp. 482-494. ISSN 19921950
Mohammed, S.A.; Abdullah, E.C.; Geldart, D.; Raman, A.A.A. (2011) Measuring powder flowability with a modified Warren Spring cohesion tester. Particuology, 9 (2). pp. 148-154. ISSN 1674-2001
Mohd Said, S.; Chow, Chee-Onn; Mokhtar, N.; Ramli, R.; Tuan Ya, T.M.Y.S.; Mohd Sabri, M.F. (2011) Accreditation of engineering programs: an evaluation of current practices in Malaysia. International Journal of Technology and Design Education. pp. 1-16. ISSN 0957-7572
Mokhtar, N.; Arof, H.; Adikan, F.R.M.; Mubin, M. (2011) Real time noise-speech discrimination in time domain for speech recognition application. Scientific Research and Essays, 6 (1). pp. 18-22. ISSN 1992-2248
Mokhtar, N.; Arof, H.; Adikan, F.R.M.; Mubin, M. (2011) Real time noise-speech discrimination in time domain for speech recognition application. Scientific Research and Essays, 6 (1). pp. 18-22. ISSN 19922248
Mokhtar, N.B.; Arof, H.; Iwahashi, M. (2011) Real time eyeball tracking via derivative dynamic time warping for human-machine interface. International Journal of Innovative Computing Information and Control, 7 (7B). pp. 4335-4346. ISSN 1349-4198
Moo, E.K.; Abu Osman, N.A.; Pingguan-Murphy, B. (2011) The metabolic dynamics of cartilage explants over a long-term culture period. Clinics, 66 (8). pp. 1431-1436. ISSN 1807-5932
Muhammad, B.M.Y.; Raman, A.A.A. (2011) Production of superlight saraline drill-in fluid. Chemistry and Technology of Fuels and Oils, 46 (6). pp. 401-404. ISSN 0009-3092
Munawar, K.; Badrul, M.J.; Abdul Aziz, A.R. (2011) Preparation of a nontraditional ultralight fluid for increasing oil production using natural, ground, and acid-activated clay. Chemistry and Technology of Fuels and Oils, 46 (6). pp. 392-400. ISSN 00093092 (ISSN)
N
Narmashiri, K.; Jumaat, M.Z. (2011) Reinforced steel I-beams: a comparison between 2D and 3D simulation. Simulation Modelling Practice and Theory, 19 (1). pp. 564-585. ISSN 1569-190X
Narmashiri, K.; Jumaat, M.Z.; Ramli Sulong, N.H. (2011) Local stiffening of steel I-beams by using CFRP materials. Advanced Materials Research, 163. pp. 3838-3843. ISSN 0878492062
Narmashiri, K.; Jumaat, M.Z.; Sulong, N.H.R. (2011) Failure modes of CFRP flexural strengthened steel I-beams. In: 8th International Conference on Composite Science and Technology, ICCST8, 2011, Kuala Lumpur.
Narmashiri, K.; Jumaat, M.Z.; Sulong, N.H.R. (2011) Local stiffening of steel I-beams by using CFRP materials. In: 2011 International Conference on Structures and Building Materials, ICSBM 2011, 2011, Guangzhou.
Narmashiri, K.; Ramli Sulong, N.H.; Jumaat, M.Z. (2011) Flexural strengthening of steel I-beams by using CFRP strips. International Journal of Physical Sciences, 6 (7). pp. 1620-1627. ISSN 19921950
Nosrati , S.; Jayakumar , N.S.; Hashim , M.A. (2011) Performance evaluation of supported ionic liquid membrane for removal of phenol. Journal of Hazardous Materials. ISSN 03043894
P
Palizban, O.; Mekhilef, S. (2011) Modeling and control of photovoltaic panels base perturbation and observation MPPT method. In: 2011 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2011, Penang.
Palizban, O.; Mekhilef, S. (2011) Power optimization and static performance investigation of an island-mode doubly-fed induction generator (DFIG). In: 2011 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2011, Penang.
Palizban, O.; Rezaei, M. A.; Mekhilef, S. (2011) Active and reactive power control for a hybrid system with photovoltaic panel, wind turbine, fuel cells, electrolyzer and super capacitor in off-grid mode. In: 2011 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2011, Penang.
R
Rajendran, S.; Arof, H.; Mokhtar, N.; Mubin, M.; Yegappan, S.; Ibrahim, F. (2011) Dual modality search and retrieval technique analysis for leukemic information system. Scientific Research and Essays, 6 (2). pp. 247-255. ISSN 1992-2248
Razavi, S.V.; Jumaat, M.Z.; Ei-Shafie, A.H. (2011) Using feed-forward back propagation (FFBP) neural networks for compressive strength prediction of lightweight concrete made with different percentage of scoria instead of sand. International Journal of Physical Sciences, 6 (6). pp. 1325-1331. ISSN 19921950
Razavi, S.V.; Jumaat, M.Z.; Ei-Shafie, A.H.; Mohammadi, P. (2011) Artificial neural networks for mechanical strength prediction of lightweight mortar. Scientific Research and Essays, 6 (16). pp. 3406-3417. ISSN 19922248
Razavi, S.V.; Jumaat, M.Z.; Ei-Shafie, A.H.; Mohammadi, P. (2011) General regression neural network (GRNN) for the first crack analysis prediction of strengthened RC one-way slab by CFRP. International Journal of Physical Sciences, 6 (10). pp. 2439-2446. ISSN 19921950
S
Safari, A.; Mekhilef, S. (2011) Implementation of incremental conductance method with direct control. In: 2011 IEEE Region 10 Conference: Trends and Development in Converging Technology Towards 2020, TENCON 2011, Bali.
Safari, A.; Mekhilef, S. (2011) Incremental conductance MPPT method for PV systems. In: 2011 Canadian Conference on Electrical and Computer Engineering, CCECE 2011, Niagara Falls, ON.
Safari, A.; Mekhilef, S. (2011) Simulation and hardware implementation of incremental conductance MPPT with direct control method using cuk converter. IEEE Transactions on Industrial Electronics, 58 (4). pp. 1154-1161. ISSN 0278-0046
Safiuddin, M.; Alengaram, U.J.; Salam, M.A.; Jumaat, M.Z.; Jaafar, F.F.; Saad, H.B. (2011) Properties of high-workability concrete with recycled concrete aggregate. Materials Research-Ibero-American Journal of Materials, 14 (2). pp. 248-255. ISSN 1516-1439
Safiuddin, M.; Mahmud, H.B.; Jumaat, M.Z. (2011) Efficacy of ASTM saturation techniques for measuring the water absorption of concrete. Arabian Journal for Science and Engineering, 36 (5). pp. 761-768. ISSN 1319-8025
Safiuddin, M.; Md.Isa, M.H.; Jumaat, M.Z. (2011) Fresh properties of self-consolidating concrete incorporating palm oil fuel ash as a supplementary cementing material. Chiang Mai Journal of Science, 38 (3). pp. 389-404. ISSN 01252526
Safiuddin, M.; Salam, M.A.; Jumaat, M.Z. (2011) Correlations between fresh properties of self-consolidating concrete including palm oil fuel ash. In: 1st International Conference on Civil Engineering, Architecture and Building Materials, CEABM 2011, Haikou.
Safiuddin, M.; Salam, M.A.; Jumaat, M.Z. (2011) Utilization of palm oil fuel ash in concrete: a review. Journal of Civil Engineering and Management, 17 (2). pp. 234-247. ISSN 13923730
Safiuddin, M.D.; Salam, M.A.; Jumaat, M.Z. (2011) Effects of recycled concrete aggregate on the fresh properties of self-consolidating concrete. Archives of Civil and Mechanical Engineering, 11 (4). pp. 1023-1041. ISSN 16449665
Saidur, R.; Atabani, A.E.; Mekhilef, S. (2011) A review on electrical and thermal energy for industries. Renewable and Sustainable Energy Reviews, 15 (4). pp. 2073-2086. ISSN 1364-0321
Saidur, R.; Elcevvadi, E.T.; Mekhilef, S.; Safari, A.; Mohammed, H.A. (2011) An overview of different distillation methods for small scale applications. Renewable and Sustainable Energy Reviews, 15 (9). pp. 4756-4764. ISSN 1364-0321
Saiful Islam, A.B.M.; Jameel, M.; Jumaat, M.Z. (2011) Effect of time elapse after wave hitting on coupled spar platform. International Journal of Physical Sciences, 6 (11). pp. 2671-2680. ISSN 19921950
Saiful Islam, A.B.M.; Jameel, M.; Rahman, M.A.; Jumaat, M.Z. (2011) Earthquake time history for Dhaka, Bangladesh as competent seismic record. International Journal of Physical Sciences, 6 (16). pp. 3921-3926. ISSN 19921950
Saiful Islam., A.B.M.; Jameel, M.; Jumaat, M.Z.; Shirazi, S.M. (2011) Spar platform at deep water region in Malaysian sea. International Journal of Physical Sciences, 6 (30). pp. 6872-6881. ISSN 19921950
Saiful Islam., A.B.M.; Jameel., M.; Ahmad., S.I.; Jumaat., M.Z. (2011) Study on corollary of seismic base isolation system on buildings with soft storey. International Journal of Physical Sciences, 6 (11). pp. 2654-2661. ISSN 19921950
Sairi, N.A.; Yusoff, R.; Alias, Y.; Aroua, M.K. (2011) Solubilities of CO 2 in aqueous N-methyldiethanolamine and guanidinium trifluoromethanesulfonate ionic liquid systems at elevated pressures. Fluid Phase Equilibria, 300 (1-2). pp. 89-94. ISSN 03783812
Salehi, M; Bahreininejad, A; Nakhai, I (2011) On-line analysis of out-of-control signals in multivariate manufacturing processes using a hybrid learning-based model. Neurocomputing, 74 (12-13). pp. 2083-2095. ISSN 0925-2312
Salehi, M; Bahreininejad, A.; Nakhai, I (2011) On-line analysis of out-of-control signals in multivariate manufacturing processes using a hybrid learning-based model. Neurocomputing, 74 (12-13). pp. 2083-2095. ISSN 0925-2312
Samsudin, S.S.; Mokhtar, N.; Arof, H.; Ibrahim, F.; Iwahashi, M. (2011) Blind user indoor environment mapping system for self-localization. In: 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011, 2011, Xi'an.
Sarmani, A.R.; Sheih, S.J.; Adikan, F.R.M.; Mahdi, M.A. (2011) Spectral hole burning effects initiated by uniform signal intensities in a gain-flattened EDFA. Chinese Optics Letters, 9 (2). ISSN 1671-7694
Shafigh, P.; Jumaat, M.Z.; Bin Mahmud, H.; Alengaram, U.J. (2011) A new method of producing high strength oil palm shell lightweight concrete. Materials and Design, 32 (10). pp. 4839-4843. ISSN 0261-3069
Shafigh, P.; Jumaat, M.Z.; Mahmud, H. (2011) Oil palm shell as a lightweight aggregate for production high strength lightweight concrete. Construction and Building Materials, 25 (4). pp. 1848-1853. ISSN 0950-0618
Shafigh, P.; Jumaat, M.Z.; Mahmud, H.B.; Alengaram, U.J. (2011) A new method of producing high strength oil palm shell lightweight concrete. Materials & Design, 32 (10). pp. 4839-4843. ISSN 0261-3069
Shafigh, P.; Mahmud, H.; Jumaat, M.Z. (2011) Effect of steel fiber on the mechanical properties of oil palm shell lightweight concrete. Materials & Design, 32 (7). pp. 3926-3932. ISSN 0261-3069
T
Taha, Z.; Tang, Y.R.; Yap, K.C. (2011) Development of an onboard system for flight data collection of a small-scale UAV helicopter. Mechatronics, 21 (1). pp. 132-144. ISSN 0957-4158
Tay, S.L.; Haseeb, A.S.M.A.; Johan, M.R. (2011) Addition of cobalt nanoparticles into Sn-3.8Ag-0.7Cu lead-free solder by paste mixing. Soldering & Surface Mount Technology, 23 (1). pp. 10-14. ISSN 0954-0911
Tsukiyama, D.; Fukuda, Y.; Miyake, S.; Mekhilef, S.; Kwon, S. K.; Nakaoka, M. (2011) A new 98 soft-switching full-bridge DC-DC converter based on secondary-side LC resonant principle for PV generation systems. In: 2011 IEEE 9th International Conference on Power Electronics and Drive Systems, PEDS 2011, Singapore.
Y
Yaghmaie, M; Bahreininejad, A (2011) A context-aware adaptive learning system using agents. Expert Systems With Applications, 38 (4). pp. 3280-3286. ISSN 0957-4174
Younis, M.A.A.; Rahim, N.A.; Mekhilef, S. (2011) DSP controlled isolated DC-DC converter for distributed generation system. International Review of Electrical Engineering, 6 (4). pp. 1570-1580. ISSN 18276660
Younis, M.A.A.; Rahim, N.A.; Mekhilef, S. (2011) Simulation of grid connected THIPWM-three-phase inverter using SIMULINK. In: 2011 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2011, Langkawi.
Yusoff, N.; Abu Osman, N.A.; Pingguan-Murphy, B. (2011) Design and validation of a bi-axial loading bioreactor for mechanical stimulation of engineered cartilage. Medical Engineering & Physics, 33 (6). pp. 782-788. ISSN 1350-4533
This list was generated on Sun May 26 03:02:57 2013 MYT.
