 | Up a level |
Abbas, Hazzim F. and Daud, Wan Mohd Ashri Wan (2010) Influence of reactor material and activated carbon on the thermocatalytic decomposition of methane for hydrogen production. Applied Catalysis A: General, 388 (1-2). pp. 232-239. ISSN 0926-860X, DOI https://doi.org/10.1016/j.apcata.2010.08.057.
Abd Shukor, Mohd Hamdi and Toque, J.A. and Ide-Ektessabi, A. (2010) Wear characteristics and adhesion behavior of calcium phosphate thin-films. Key Engineering Materials, 443. pp. 469-474. ISSN 0878492674,
Abdelaziz, Mahrez and Mohamed Rehan, Karim (2010) Rheological evaluation of bituminous binder modified with waste plastic material. In: 5th International Symposium on Hydrocarbons & Chemistry (ISHC5), Sidi Fredj, Algiers, 23 - 25 May 2010. (Unpublished)
Abdolrasol, M.G.M. and Mekhilef, Saad (2010) Robust hybrid anti-islanding method for inverter-based distributed generation. In: 2010 IEEE Region 10 Conference, TENCON 2010, Fukuoka.
Abdolrasol, M.G.M. and Mekhilef, Saad (2010) Three phase grid connected anti-islanding controller based on distributed generation interconnection. In: 2010 IEEE International Conference on Power and Energy, PECon2010, Kuala Lumpur.
Abdul Rahim, H. and Ibrahim, F. and Taib, M.N. (2010) System identification of nonlinear autoregressive models in monitoring dengue infection. International Journal on Smart Sensing and Intelligent Systems, 3 (4). pp. 783-806. ISSN 11785608,
Abdullah, Nadia and Abu Talib, Abd Rahim and Saiah, Helmey Ramdhaney Mohd and Jaafar, Abdul Aziz and Salleh, Mohamad Amran Mohd (2010) Erratum to “Film thickness effects on calibrations of a narrowband thermochromic liquid crystal” [Experimental Thermal and Fluid Science 33 (2009) 561–578]. Experimental Thermal and Fluid Science, 34 (6). p. 812. ISSN 0894-1777, DOI https://doi.org/10.1016/j.expthermflusci.2010.04.002.
Abioye, O.P. and Agamuthu, Pariatamby and Abdul Raman, Abdul Aziz (2010) Phytoaccumulation of zinc and iron by jatropha curcas grown in used lubricating oil-contaminated soil. Malaysian Journal of Science, 29 (3). pp. 207-213. ISSN 1394-3065,
Abioye, P.O. and Abdul Raman, Abdul Aziz and Agamuthu, P. (2010) Enhanced biodegradation of used engine oil in soil amended with organic wastes. Water Air and Soil Pollution, 209 (1-4). pp. 173-179. ISSN 0049-6979,
Abu Osman, Noor Azuan and Spence, W.D. and Solomonidis, S.E. and Paul, J.P. and Weir, A.M. (2010) Transducers for the determination of the pressure and shear stress distribution at the stump-socket interface of trans-tibial amputees. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 224 (8). pp. 1239-1250. ISSN 2041-2975, DOI https://doi.org/10.1243/09544054jem1820.
Abu Osman, Noor Azuan and Spence, W.D. and Solomonidis, S.E. and Paul, J.P. and Weir, A.M. (2010) The patellar tendon bar! Is it a necessary feature? Medical Engineering & Physics, 32 (7). pp. 760-765. ISSN 1350-4533, DOI https://doi.org/10.1016/j.medengphy.2010.04.020.
Affandi, N.A.M. and Kamali, B. and Mz, R. and Tamin, N.M. and Hashim, Roslan (2010) Early growth and survival of Avicennia alba seedlings under excessive sedimentation. Scientific Research and Essays, 5 (18). pp. 2801-2805. ISSN 1992-2248,
Agamuthu, Pariatamby and Abioye, O.P. and Abdul Raman, Abdul Aziz (2010) Phytoremediation of soil contaminated with used lubricating oil using Jatropha curcas. Journal of Hazardous Materials, 179 (1-3). pp. 891-894. ISSN 0304-3894, DOI https://doi.org/10.1016/j.jhazmat.2010.03.088.
Ahamed, J.U. and Bhuiya, M.M.K. and Saidur, Rahman and Masjuki, Haji Hassan and Sarkar, M.A.R. and Sayem, A.S.M. and Islam, M. (2010) Forced convection heat transfer performance of porous twisted tape insert. Engineering e-Transaction, 5 (2). pp. 67-79. ISSN 1823-6379,
Ahamed, Jamal Uddin and Saidur, Rahman and Masjuki, Haji Hassan (2010) Thermodynamic performance analysis of R-600 and R-600a as refrigerant. Engineering e-Transaction, 5 (1). pp. 11-18. ISSN 1823-6379,
Ahmad, Harith and Cheng, Xiau San and Tamjis, Mohamad Rom and Harun, Sulaiman Wadi (2010) Effects of Pumping Scheme and Double-Propagation on the Performance of ASE Source using Dual-Stage Bismuth-Based Erbium-Doped Fiber. Journal of Electromagnetic Waves and Applications, 24 (2-3). pp. 373-381. ISSN 0920-5071, DOI https://doi.org/10.1163/156939310790735660.
Ahmad, Harith and Parvizi, R. and Shahabuddin, N.S. and Yusoff, Z. and Harun, Sulaiman Wadi (2010) Effect of gain medium on the performance of brillouin fiber laser. Microwave and Optical Technology Letters, 52 (9). pp. 2158-2160. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.25386.
Ahmad, Harith and Parvizi, Roghaieh and Dimyati, Kaharudin and Tamjis, Mohamad Rom and Harun, Sulaiman Wadi (2010) FWM-based multi-wavelength erbium-doped fiber laser using Bi-EDF. Laser Physics, 20 (6). pp. 1414-1417. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X10110010.
Ahmad, Harith and Shahi, S. and Harun, Sulaiman Wadi (2010) Bismuth-based erbium-doped fiber as a gain medium for L-band amplification and Brillouin fiber laser. Laser Physics, 20 (3). pp. 716-719. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X10050014.
Ahmad, Harith and Shahi, Sharifeh and Harun, Sulaiman Wadi (2010) PCF-based Multi-wavelength Laser using Four-wave Mixing Effect. Journal of Optical Communications, 31 (2). pp. 85-87. ISSN 0173-4911, DOI https://doi.org/10.1515/JOC.2010.31.2.85.
Ahmad, Harith and Zulkifli, M.Z. and Latif, A.A. and Harun, Sulaiman Wadi (2010) Novel O-band tunable fiber laser using an array waveguide grating. Laser Physics Letters, 7 (2). pp. 164-167. ISSN 1612-2011, DOI https://doi.org/10.1002/lapl.200910118.
Ahmad, Harith and Zulkifli, M.Z. and Latif, A.A. and Harun, Sulaiman Wadi (2010) O-band multi-wavelength fiber laser. Journal of Nonlinear Optical Physics & Materials, 19 (2). pp. 229-236. ISSN 0218-8635, DOI https://doi.org/10.1142/S0218863510005261.
Ahmad, Harith and Zulkifli, M.Z. and Latif, A.A. and Hassan, N.A. and Ghani, Z.A. and Harun, Sulaiman Wadi (2010) 120 nm wide band switchable fiber laser. Optics Communications, 283 (21). pp. 4333-4337. ISSN 0030-4018, DOI https://doi.org/10.1016/j.optcom.2010.06.040.
Ahmady, A. and Hashim, M.A. and Aroua, Mohamed Kheireddine (2010) Experimental investigation on the solubility and initial rate of absorption of CO2 in aqueous mixtures of methyldiethanolamine with the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate. Journal of Chemical and Engineering Data, 55 (12). pp. 5733-5738. ISSN 0021-9568, DOI https://doi.org/10.1021/Je1006949.
Ahmed, R.A. and Mekhilef, Saad and Ping, H.W. (2010) New multilevel inverter topology with minimum number of switches. In: 2010 IEEE Region 10 Conference, TENCON 2010, Fukuoka.
Aizura, A.B. and Mahlia, T.M.I. and Masjuki, Haji Hassan (2010) Potential fuel savings and emissions reduction from fuel economy standards implementation for motor-vehicles. Clean Technologies and Environmental Policy, 12 (3). pp. 255-263. ISSN 1618-954X,
Akib, S. and Fayyadh, M.M. and Razak, H.A. (2010) Review of bridge vibration and future direction. In: 17th International Congress on Sound and Vibration 2010, ICSV 2010, 2010.
Al-Alimi, A.W. and Al-Mansoori, M.H. and Abas, A.F. and Mahdi, M.A. and Ajiya, M. and Adikan, Faisal Rafiq Mahamd (2010) Efficient technique for intracavity loss optimization in a dual-wavelength erbium-doped fiber laser. Laser Physics, 20 (11). pp. 2001-2005. ISSN 1054-660X,
Al-Gumaei, Y.A. and Dimyati, Kaharudin (2010) Optimal power control game for primary-secondary user in cognitive radio network. International Journal of Physical Sciences, 5 (4). pp. 345-351. ISSN 1992-1950,
Ale Ebrahim, N. and Ahmed, S. and Abdul Rashid, S.H. and Taha, Zahari (2010) Virtual R&D teams: a potential growth of education-industry collaboration. In: 2nd International Congress on Engineering Education (ICEED 2010), 8th - 9th December, Sunway Resort Hotel & Spa, Kuala Lumpur, Malaysia.
Ale Ebrahim, N. and Ahmed, S. and Abdul Rashid, S.H. and Taha , Z. (2010) Virtual teams: a new opportunity to develop a business. In: International Conference on Entrepreneurship Across Boundaries, 5 - 6 AUGUST, Section For Co-curricular Courses, External Faculty Electives and TITAS, University of Malaya, Kuala Lumpur, Malaysia.
Ale Ebrahim, N. and Ahmed, S. and Taha, Z. (2010) Critical factors for new product developments in SMEs virtual team. African Journal of Business Management, 4 (11). pp. 2247-2257. ISSN 1993-8233,
Ale Ebrahim, N. and Ahmed, S. and Taha, Z. (2010) Virtual R&D teams and SMEs growth: A comparative study between Iranian and Malaysian SMEs. African Journal of Business Management, 4 (11). pp. 2368-2379. ISSN 1993-8233,
Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2010) Benefits and pitfalls of virtual R&D teams: an empirical study. In: 6th International Communication & Information Technology Management Conference (ICTM 2010) , February. 23-24, Tehran, Iran.
Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2010) Envisages of new product developments in small and medium enterprises through virtual team. In: International Conference on Industrial Engineering and Operations Management (IEOM2010) , January 9-10, Dhaka, Bangladesh.
Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2010) SMEs, virtual research and development (R&D) teams and new product development: a literature review. International Journal of the Physical Sciences, 5 (7). pp. 916-930. ISSN 1992-1950,
Alengaram, Ubagaram Johnson and Mahmud, Hilmi and Jumaat, Mohd Zamin (2010) Comparison of mechanical and bond properties of oil palm kernel shell concrete with normal weight concrete. International Journal of the Physical Sciences, 5 (8). pp. 1231-1239. ISSN 1992-1950,
Alengaram, Ubagaram Johnson and Mahmud, Hilmi and Jumaat, Mohd Zamin (2010) Development of lightweight concrete using industrial waste material, palm kernel shell as lightweight aggregate and its properties. In: Chemical, Biological and Environmental Engineering (ICBEE), 2010 2nd International Conference on.
Alengaram, Ubagaram Johnson and Mahmud, Hilmi and Jumaat, Mohd Zamin and Shirazi, S.M. (2010) Effect of aggregate size and proportion on strength properties of palm kernel shell concrete. International Journal of the Physical Sciences, 5 (12). pp. 1848-1856. ISSN 1992-1950,
Ali, F.H. and Sing, W.L. and Hashim, Roslan (2010) Engineering properties of improved fibrous peat. Scientific Research and Essays, 5 (2). pp. 154-169. ISSN 1992-2248,
Almurib, H.A.F. and Askari, M. and Moghavvemi, M. (2010) Hard constraints explicit model predictive control of an inverted pendulum. In: 2010 1st International Conference on Energy, Power and Control, EPC-IQ01 2010, 30 November-2 December 2010, Basrah, Iraq.
Amiri-Khorasani, M. and Abu Osman, Noor Azuan and Yusof, A. (2010) Electromyography assessments of the vastus medialis muscle during soccer instep kicking between dynamic and static stretching. Journal of Human Kinetics, 24. pp. 35-41. ISSN 1640-5544,
Amiri-Khorasani, M. and Abu Osman, Noor Azuan and Yusof, A. (2010) Kinematics analysis: Number of trials necessary to achieve performance stability during soccer instep kicking. Journal of Human Kinetics, 23. pp. 15-19. ISSN 1640-5544,
Ar-Rawi, A.H. and Moghavvemi, Mahmoud and Ibrahim, W. (2010) Novel idea to monitor and measure blood hemoglobin noninvasively. African Journal of Biotechnology, 9 (54). pp. 9295-9305. ISSN 1684-5315,
Atadashi, I.M. and Aroua, Mohamed Kheireddine and Abdul Raman, Abdul Aziz (2010) High quality biodiesel and its diesel engine application: a review. Renewable and Sustainable Energy Reviews, 14 (7). pp. 1999-2008. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2010.03.020.
Awang, N.A. and Zulkifli, M.Z. and Norizan, S.F. and Harun, Sulaiman Wadi and Ghani, Z.A. and Ahmad, Harith (2010) Highly efficient and high output power of erbium doped fiber laser in a linear cavity configuration. Laser Physics, 20 (10). pp. 1894-1898. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X10190011.
Awang, Noor Azura and Ahmad, Harith and Latif, Amirah Abdul and Zulkifli, Mohd Zamani and Ghani, Zawajer Abd and Harun, Sulaiman Wadi (2010) O-band to C-band wavelength converter by using four-wave mixing effect in 1310 nm SOA. Journal of Modern Optics, 57 (21). pp. 2147-2153. ISSN 0950-0340, DOI https://doi.org/10.1080/09500340.2010.529953.
Bakar, A.H.A. and Mokhlis, Hazlie and Ling, L.A. and Ping, H.W. (2010) Lightning over voltage performance of 132kV GIS substation in Malaysia. In: Power System Technology (POWERCON), 2010 International Conference on, 2010.
Baroutian, S. and Aroua, M.K. and Abdul Raman, Abdul Aziz and Sulaiman, N.M.N. (2010) Viscosities and densities of binary and ternary blends of palm oil plus palm biodiesel plus diesel fuel at different temperatures. Journal of Chemical and Engineering Data, 55 (1). pp. 504-507. ISSN 0021-9568, DOI https://doi.org/10.1021/je900299x.
Baroutian, S. and Aroua, Mohamed Kheireddine and Abdul Raman, Abdul Aziz and Sulaiman, N.M.N. (2010) Potassium hydroxide catalyst supported on palm shell activated carbon for transesterification of palm oil. Fuel Processing Technology, 91 (11). pp. 1378-1385. ISSN 0378-3820, DOI https://doi.org/10.1016/j.fuproc.2010.05.009.
Baroutian, Saeid and Aroua, Mohamed Kheireddine and Abdul Raman, Abdul Aziz and Sulaiman, Nik Meriam Nik (2010) Methanol recovery during transesterification of palm oil in a TiO2/Al2O3 membrane reactor: Experimental study and neural network modeling. Separation and Purification Technology, 76 (1). pp. 58-63. ISSN 1383-5866, DOI https://doi.org/10.1016/j.seppur.2010.09.020.
Che Hassan, C.R. and Puvaneswaran, B. and Abdul Raman, Abdul Aziz and Noor Zalina, M. and Hung, F.C. and Sulaiman, N.M. (2010) Quantitative risk assessment for the transport for ammonia by rail. Journal of Process Safety Progress, 29 (1). pp. 61-63. DOI https://doi.org/10.1002/prs.10345.
Cheng, X.S. and Ahmad, Harith and Harun, Sulaiman Wadi (2010) Broadband ase source using bismuth-based erbium-doped fibers in double-pass set-up. Microwave and Optical Technology Letters, 52 (7). pp. 1636-1638. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.25239.
Chitsazan, I. and Kobraei, M. and Jumaat, Mohd Zamin and Shafigh, P. (2010) An experimental study on the flexural behaviour of FRP RC bemas and comparison of the ultimate moment capacity with ACI. Journal of Civil Engineering and Construction Technology, 1 (2). pp. 27-42. ISSN 2141-2634,
Choudhury, I.A. and Lee, C.Y. and Bhuiyan, M.S.H. and Nukman, Y. (2010) CETE91 tool condition monitoring using ae signal in turning of ASSAB-705 steel. In: World Engineering Congress 2010,Conference on Manufacturing Technology and Management, 2-5 August 2010, Kuching,Sarawak. (Unpublished)
Choudhury, I.A. and Lee, C.Y. and Bhuiyan, M.S.H. and Nukman, Y. (2010) Tool condition monitoring using ae signal in turning of assab-705 steel. In: World Engineering Congress 2010,Conference on Manufacturing Technology and Management, 2-5 August 2010, Kuching,Sarawak.
Choudhury, Imtiaz Ahmed and Shirley, S. (2010) Laser cutting of polymeric materials: An experimental investigation. Optics & Laser Technology, 42 (3). pp. 503-508. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2009.09.006.
Cui, M. and Jang, M. and Cho, S.H. and Khim, J. (2010) Kinetic and thermodynamic studies of the adsorption of heavy metals on to a new adsorbent: coal mine drainage sludge. Environmental Technology, 31 (11). pp. 1203-1211. ISSN 0959-3330, DOI https://doi.org/10.1080/09593330903573215.
Dahalan, Wardiah Mohd and Mokhlis, Hazlie (2010) Techniques of network reconfiguration for service restoration in shipboard power system: a review. Australian Journal of Basic and Applied Sciences, 4 (11). pp. 5556-5563. ISSN 1991-8178,
Deboucha, S. and Hashim, Roslan (2010) Effect of OPC and PFA cement on stabilised peat bricks. International Journal of the Physical Sciences, 5 (11). pp. 1671-1677. ISSN 1992-1950,
Dhakshyani, R. and Nukman, Y. and Abu Osman, Noor Azuan and Merican, A.M. and George, J. (2010) Rapid prototyping medical models for dysplastic hip orthopaedic surgery. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 224 (B5). pp. 769-776. ISSN 0954-4054, DOI https://doi.org/10.1243/09544054jem1785.
Dhananjaya, H.R. and Nagabhushanam, J. and Pandey, P.C. and Jumaat, Mohd Zamin (2010) New twelve node serendipity quadrilateral plate bending element based on mindlin-reissner theory using integrated force method. Structural Engineering and Mechanics, 36 (5). pp. 625-642. ISSN 1225-4568,
Emami, S.D. and Hajireza, P. and Abd-Rahman, F. and Abdul-Rashid, H.A. and Ahmad, Harith and Harun, Sulaiman Wadi (2010) Application of high concentration thulium-doped fiber for achieving S-band gain flattened hybrid optical amplifier. Journal of Optoelectronics and Advanced Materials, 12 (7). pp. 1446-1451. ISSN 1454-4164,
Emami, Siamak Dawazdah and Hajireza, Parsin and Abd-Rahman, Faidz and Abdul-Rashid, Hairul Azhar and Ahmad, Harith and Harun, Sulaiman Wadi (2010) Wide-band hybrid amplifier operating in S-band region. Progress In Electromagnetics Research, 102. pp. 301-313. ISSN 1559-8985, DOI https://doi.org/10.2528/PIER10012303.
Emami, Siamak Dawazdah and Harun, Sulaiman Wadi and Abd-Rahman, Faidz and Abdul-Rashid, Hairul Azhar and Daud, S.A. and Ghani, Zawajer Abd and Ahmad, Harith (2010) A theoretical study of double-pass thulium-doped fiber amplifiers. Optik, 121 (14). pp. 1257-1262. ISSN 0030-4026, DOI https://doi.org/10.1016/j.ijleo.2009.01.017.
Faisal, T. and Ibrahim, F. and Taib, M.N. (2010) A noninvasive intelligent approach for predicting the risk in dengue patients. Expert Systems with Applications, 37 (3). pp. 2175-2181. ISSN 0957-4174, DOI https://doi.org/10.1016/j.eswa.2009.07.060.
Faisal, T. and Taib, M.N. and Ibrahim, F. (2010) Reexamination of risk criteria in dengue patients using the self-organizing map. Medical and Biological Engineering and Computing, 48 (3). pp. 293-301. ISSN 0140-0118, DOI https://doi.org/10.1007/s11517-009-0561-x.
Fayyadh, M.M. and Razak, H.A. (2010) The effect of support condition on dynamic parameters. In: 17th International Congress on Sound and Vibration 2010, ICSV 2010, 2010, Cairo.
Fayyadh, M.M. and Razak, Hashim Abdul and Akib, S. (2010) Ultimate capacity and reinforcement area requirement for bridge girder using various FRP re-bars. International Journal of the Physical Sciences, 5 (17). pp. 2635-2641. ISSN 1992-1950,
Fazal, M.A. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2010) Comparative corrosive characteristics of petroleum diesel and palm biodiesel for automotive materials. Fuel Processing Technology, 91 (10). pp. 1308-1315.
Gaeid, K.S. and Ping, H.W. (2010) Induction motor fault detection and isolation through unknown input observer. Scientific Research and Essays, 5 (20). pp. 3152-3159. ISSN 1992-2248,
Ghafari, S. and Aroua, M.K. and Hasan, M. (2010) Control of pH during water denitrification in an upflow bio-electrochemical reactor (UBER) using a pumparound system. Separation and Purification Technology, 72 (3). pp. 401-405. ISSN 1383-5866, DOI https://doi.org/10.1016/j.seppur.2010.03.014.
Ghafari, S. and Hasan, M. and Aroua, M.K. (2010) A kinetic study of autohydrogenotrophic denitrification at the optimum pH and sodium bicarbonate dose. Bioresource Technology, 101 (7). pp. 2236-2242. ISSN 0960-8524, DOI https://doi.org/10.1016/j.biortech.2009.11.068.
Gunnasegaran, P. and Mohammed, H.A. and Shuaib, N.H. and Saidur, Rahman (2010) The effect of geometrical parameters on heat transfer characteristics of microchannels heat sink with different shapes. International Communications in Heat and Mass Transfer, 37 (8). pp. 1078-1086. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2010.06.014.
Hajireza, P. and Emami, S.D. and Abbasizargaleh, S. and Harun, Sulaiman Wadi and Abdul-Rashid, H.A. (2010) Optimization of gain flattened C-band EDFA using macro-bending. Laser Physics, 20 (6). pp. 1433-1437. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X10110071.
Hajireza, P. and Emami, S.D. and Cham, C.L. and Kumar, D. and Harun, Sulaiman Wadi and Abdul-Rashid, H.A. (2010) Linear all-fiber temperature sensor based on macro-bent erbium doped fiber. Laser Physics Letters, 7 (10). pp. 739-742. ISSN 1612-2011, DOI https://doi.org/10.1002/lapl.201010054.
Hajireza, Parsin and Emami, Siamak Dawazdah and Abbasizargaleh, Soroush and Harun, Sulaiman Wadi and Kumar, Deepak and Abdul-Rashid, Hairul Azhar (2010) Application of macro-bending for flat and broad gain EDFA. Journal of Modern Optics, 57 (16). pp. 1534-1541. ISSN 0950-0340, DOI https://doi.org/10.1080/09500340.2010.507882.
Hajireza, Parsin and Emami, Siamak Dawazdah and Abbasizargaleh, Soroush and Harun, Sulaiman Wadi and Kumar, Deepak and Abdul-Rashid, Hairul Azhar (2010) Temperature insensitive broad and flat gain C-band EDFA based on macro-bending. Progress In Electromagnetics Research C, 15. pp. 37-48. ISSN 1937-8718, DOI https://doi.org/10.2528/PIERC10061607.
Hamzah, A. and Paul, M.C. and Harun, Sulaiman Wadi and Huri, N.A.D. and Lokman, A. and Sen, R. and Pal, M. and Das, S. and Bhadra, S.K. and Ahmad, Harith (2010) Dual-wavelength Erbium-doped fiber laser based on Erbium-doped Zirconia fiber. Optoelectronics and Advanced Materials-Rapid Communications, 4 (8). pp. 1099-1101. ISSN 1842-6573,
Hamzah, Amirah and Harun, Sulaiman Wadi and Huri, N.A.D. and Lokman, Asiah and Arof, Hamzah and Paul, M.C. and Pal, Manimala and Das, S. and Bhadra, S.K. and Ahmad, Harith and Yoo, S. and Kalita, M.P. and Boyland, A.J. and Sahu, Jayanta Kumar (2010) Multi-wavelength fiber laser with erbium doped zirconia fiber and semiconductor optical amplifier. Optoelectronics and Advanced Materials-Rapid Communications, 4 (10). pp. 1431-1434. ISSN 1842-6573,
Hamzah, Azura and Huri, N.A.D. and Emami, Siamak Dawazdah and Harun, Sulaiman Wadi and Ahmad, Harith (2010) Investigation on the Effect of Gain Medium on the Performance of Double-pass Raman Amplifier. Journal of Optical Communications, 31 (1). ISSN 0173-4911, DOI https://doi.org/10.1515/JOC.2010.31.1.7.
Haque, A. and Won, Y.S. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2010) Investigations on Zn-Al-Ge alloys as high temperature die attach material. In: Electronics System Integration Technologies Conference, 13-16 September 2010, Berlin, Germany.
Harun, Sulaiman Wadi and Ahmad, Harith and Lim, E.L. and Alam, S.U. and Richardson, D.J. (2010) Single mode erbium ytterbium-doped fiber laser with multimode pumping. Journal of Nonlinear Optical Physics & Materials, 19 (2). pp. 203-208. ISSN 0218-8635, DOI https://doi.org/10.1142/S0218863510005212.
Harun, Sulaiman Wadi and Lim, K.S. and Jasim, A.A. and Ahmad, Harith (2010) Fabrication of tapered fiber based ring resonator. Laser Physics, 20 (7). pp. 1629-1631. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X10130050.
Harun, Sulaiman Wadi and Lim, Kok Sing and Jasim, Ali Abdulhadi and Ahmad, Harith (2010) Dual wavelength erbium-doped fiber laser using a tapered fiber. Journal of Modern Optics, 57 (21). pp. 2111-2113. ISSN 0950-0340, DOI https://doi.org/10.1080/09500340.2010.522740.
Harun, Sulaiman Wadi and Moghaddam, M.R.A. and Ahmad, Harith (2010) High output power erbium-ytterbium doped cladding pumped fiber amplifier. Laser Physics Letters, 20 (10). pp. 1899-1901. ISSN 1612-2011, DOI https://doi.org/10.1134/S1054660X10190072.
Harun, Sulaiman Wadi and Parvizi, R. and Cheng, X.S. and Parvizi, A. and Emami, S.D. and Arof, Hamzah and Ahmad, Harith (2010) Experimental and theoretical studies on a double-pass C-band bismuth-based erbium-doped fiber amplifier. Optics & Laser Technology, 42 (5). pp. 790-793. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2009.12.004.
Harun, Sulaiman Wadi and Parvizi, Roghaieh and Shahabuddin, Nurul Shahrizan and Yusoff, Zulfadzli and Ahmad, Harith (2010) Semiconductor optical amplifier-based multi-wavelength ring laser utilizing photonic crystal fiber. Journal of Modern Optics, 57 (8). pp. 637-640. ISSN 0950-0340, DOI https://doi.org/10.1080/09500340.2010.486078.
Harun, Sulaiman Wadi and Paul, M.C. and Moghaddam, M.R.A. and Das, S. and Sen, R. and Dhar, A. and Pal, M. and Bhadra, S.K. and Ahmad, Harith (2010) Diode-pumped 1028 nm Ytterbium-doped fiber laser with near 90% slope efficiency. Laser Physics, 20 (3). pp. 656-660. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X10050051.
Harun, Sulaiman Wadi and Paul, M.C. and Moghaddam, M.R.A. and Das, S. and Sen, R. and Dhar, A. and Pal, M. and Bhadra, S.K. and Ahmad, Harith (2010) Efficient diode pumped ytterbium-doped fibre laser. Electronics Letters, 46 (1). 68-U97. ISSN 0013-5194, DOI https://doi.org/10.1049/el.2010.2128.
Harun, Sulaiman Wadi and Shahi, Sharifeh and Ahmad, Harith (2010) Brillouin fiber laser with a 49 cm long Bismuth-based erbium-doped fiber. Laser Physics Letters, 7 (1). pp. 60-62. ISSN 1612-2011, DOI https://doi.org/10.1002/lapl.200910101.
Harun, Sulaiman Wadi and Yang, H.Z. and Yasin, M. and Ahmad, Harith (2010) Theoretical and experimental study on the fiber optic displacement sensor with two receiving fibers. Microwave and Optical Technology Letters, 52 (2). pp. 373-375. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.24900.
Harun, Sulaiman Wadi and Yasin, M. and Yang, H.Z. and Kusminarto, - and Karyono, - and Ahmad, Harith (2010) Estimation of metal surface roughness using fiber optic displacement sensor. Laser Physics, 20 (4). pp. 904-909. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X10070091.
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, R. and Hamdi, M. (2010) Influence of substrate temperatures on structural, morphological and optical properties of rf-sputtered anatase TiO2 films. Arabian Journal for Science and Engineering, 35 (1C). pp. 147-156. ISSN 1319-8025,
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, Rahman (2010) Adhesion and wear behavior of nanostructured titanium oxide thin films. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 5-10. ISSN 1823-0334,
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, Rahman and Abd Shukor, Mohd Hamdi (2010) Influence of substrate temperatures on structural, morphological and optical properties of RF-sputtered anatase Tio 2 films. Arabian Journal for Science and Engineering, 35 (1 C). pp. 147-156. ISSN 1319-8025,
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Abd Shukor, Mohd Hamdi (2010) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO2 thin films. Optical Materials, 32 (6). pp. 690-695. ISSN 0925-3467, DOI https://doi.org/10.1016/j.optmat.2009.07.011.
Hasanuzzaman, M. and Rahim, N.A. and Saidur, Rahman (2010) Analysis of energy savings for rewinding and replacement of industrial motor. In: 2010 IEEE International Conference on Power and Energy, PECon2010, 2010, Kuala Lumpur.
Haseeb, A.S. Md. Abdul and Hasan, M.M. and Masjuki, Haji Hassan (2010) Structural and mechanical properties of nanostructured TiO2 thin films deposited by RF sputtering. Surface and Coatings Technology, 205 (2). pp. 338-344. ISSN 0257-8972, DOI https://doi.org/10.1016/j.surfcoat.2010.06.058.
Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Ann, L.J. and Fazal, M.A. (2010) Corrosion characteristics of copper and leaded bronze in palm biodiesel. Fuel Processing Technology, 91 (3). pp. 329-334. ISSN 0378-3820,
Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Siang, C.T. and Fazal, M.A. (2010) Compatibility of elastomers in palm biodiesel. Renewable Energy, 35 (10). pp. 2356-2361. ISSN 0960-1481,
Haseeb, A.S. Md. Abdul and Sia, S.Y. and Fazal, M.A. and Masjuki, Haji Hassan (2010) Effect of temperature on tribological properties of palm biodiesel. Energy, 35 (3). pp. 1460-1464. ISSN 0360-5442,
Hashim, Roslan and Kamali, B. and Tamin, N.M. and Zakaria, R. (2010) An integrated approach to coastal rehabilitation: Mangrove restoration in Sungai Haji Dorani, Malaysia. Estuarine Coastal and Shelf Science, 86 (1). pp. 118-124. ISSN 0272-7714, DOI https://doi.org/10.1016/j.ecss.2009.10.021.
Hasikin, K. and Soin, N. and Ibrahim, F. (2010) Micro-diaphragm performance analysis for polyimide diaphragm. In: 2010 IEEE International Conference on Semiconductor Electronics, ICSE 2010, 2010, Melaka .
Hassan, L.H. and Moghavvemi, M. and Mohamed, H.A.F. (2010) Power system oscillations damping using unified power flow controller-based stabilizer. American Journal of Applied Sciences, 7 (10). pp. 1393-1395. ISSN 15469239, DOI https://doi.org/10.3844/ajassp.2010.1393.1395.
Hassan, L.H. and Moghavvemi, M. and Mohamed, H.A.F. (2010) Takagi-sugeno fuzzy gains scheduled PI controller for enhancement of power system stability. American Journal of Applied Sciences, 7 (1). pp. 145-152. ISSN 1546-9239,
Hatanaka, N. and Iizuka, T. and Takakura, N. and Yamaguchi, K. and Hassan, M.A. (2010) Friction aided deep drawing of aluminum sheet using blank holder divided into four segments. Keikinzoku/Journal of Japan Institute of Light Metals, 60 (7). pp. 315-320. ISSN 1880-8018,
Heryanto, Rudi and Abdullah, Ezzat Chan and Hasan, Masitah (2010) Solubility of isoniazid in supercritical carbon dioxide. Journal of Chemical and Engineering Data, 55 (6). pp. 2306-2309. ISSN 0021-9568, DOI https://doi.org/10.1021/je900622h.
Ho, Y.K. and Mjalli, F.S. and Yeoh, H.K. (2010) Multivariable adaptive predictive model based control of a biodiesel transesterification reactor. Journal of Applied Sciences, 10 (12). pp. 1019-1027. ISSN 1812-5654,
Husain, N.M. and Mahmud, H.B. and Karim, M.R. and Hamid, N.B.A.A. (2010) Effects of aggregate gradations on properties of grouted Macadam composite pavement. In: 2nd International Conference on Chemical, Biological and Environmental Engineering, ICBEE 2010, 2010, Cairo.
Hussain, Mohd Azlan and Aroua, Mohamed Kheireddine and Yin, Chun Yang and Rahman, Ramzalina Abd and Ramli, Noor Asriah (2010) Hybrid neural network for prediction of CO2 solubility in monoethanolamine and diethanolamine solutions. Korean Journal of Chemical Engineering, 27 (6). pp. 1864-1867. ISSN 0256-1115, DOI https://doi.org/10.1007/s11814-010-0270-z.
Ibrahim, F. and Faisal, T. and Mohamad Salim, M.I. and Taib, M.N. (2010) Non-invasive diagnosis of risk in dengue patients using bioelectrical impedance analysis and artificial neural network. Medical and Biological Engineering and Computing, 48 (11). pp. 1141-1148. ISSN 0140-0118, DOI https://doi.org/10.1007/s11517-010-0669-z.
Ibrahim, F. and Jahanshahi, P. and Abd Rahman, N. and Abdul Kahar, M.K.B. and Madou, M. and Nozari, A.A. and Soin, N. and Md Dawal, S.Z. and Abi Samra, K. (2010) Analysis and experiment of centrifugal force for microfluidic ELISA CD platform. In: 2010 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2010, 2010, Kuala Lumpur.
Ibrahim, Shaliza and Nienow, A.W. (2010) The effect of viscosity on particle suspension in an aerated stirred vessel with different impellers and bases. Chemical Engineering Communications, 197 (4). pp. 434-454. ISSN 0098-6445, DOI https://doi.org/10.1080/00986440903245914.
Igroufa, Samira and Hashim, Roslan and Taib, Samsudin (2010) Mapping of salt-water intrusion by geoelectrical imaging in Carey Islands. In: 5th International Symposium on Hydrocarbons & Chemistry (ISHC5), Sidi Fredj, Algiers, 23 - 25 May 2010. (Unpublished)
Islam, A.B.M.S. and Ahmad, Syed Ishtiaq and Jameel, M. and Jumaat, Mohd Zamin (2010) Seismic base isolation for buildings in regions of low to moderate seismicity: practical alternative design. Practice Periodical on Structural Design and Construction, 17 (1). pp. 13-20. ISSN 1084-0680, DOI https://doi.org/10.1061/(ASCE)SC.1943-5576.0000093 .
Islam, M.R. and Saidur, Rahman and Rahim, N.A. and Solangi, K.H. (2010) Usage of solar energy and its status in Malaysia. Engineering e-Transaction, 5 (1). pp. 6-10. ISSN 1823-6379,
Islam, M.S. and Hashim, Roslan (2010) Behaviour of stabilised peat: a field study. Scientific Research and Essays, 5 (17). pp. 2366-2374. ISSN 1992-2248,
Ismail, N.A. and Kasim, L.M. and Mokhtar, N.F. and Yaakub, T.S.T. and Mokhlis, Hazlie (2010) Digital analysis and development of ride-through capability of ac contactor with respect to voltage sag characteristics. In: Computer and Automation Engineering (ICCAE), 2010 The 2nd International Conference on, 2010.
Issabayeva, G. and Aroua, M.K. and Sulaiman, N.M. (2010) Study on palm shell activated carbon adsorption capacity to remove copper ions from aqueous solutions. Desalination, 262 (1-3). pp. 94-98. ISSN 0011-9164, DOI https://doi.org/10.1016/j.desal.2010.05.051.
Jahanshahi, P. and Md Dawal, S.Z. and Ibrahim, F. and Nozari, A.A. and Soin, N. (2010) Development of a low-cost and portable device controller for point-of-care medical diagnostics. In: 2010 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2010, 2010, Kuala Lumpur.
Jahirul, M.I. and Masjuki, Haji Hassan and Saidur, Rahman and Kalam, M.A. and Jayed, M.H. and Wazed, M.A. (2010) Comparative engine performance and emission analysis of CNG and gasoline in a retrofitted car engine. Applied Thermal Engineering, 30 (14-15). pp. 2219-2226. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2010.05.037.
Jahirul, M.I. and Saidur, Rahman and Masjuki, Haji Hassan (2010) Predictability of artificial neural network (ANN) in performance prediction of a retrofitted CNG engine. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 268-275. ISSN 1823-0334,
Jang, M. (2010) Application of portable X-ray fluorescence (pXRF) for heavy metal analysis of soils in crop fields near abandoned mine sites. Environmental Geochemistry and Health, 32 (3). pp. 207-216. ISSN 0269-4042, DOI https://doi.org/10.1007/s10653-009-9276-z.
Jang, M. and Lee, H.J. and Shim, Y. (2010) Rapid removal of fine particles from mine water using sequential processes of coagulation and flocculation. Environmental Technology, 31 (4). pp. 423-432. ISSN 0959-3330 , DOI https://doi.org/10.1080/09593330903513245.
Jayakumar, Natesan Subramanian and Hashim, Mohd Ali and Thomas, M.T. (2010) Input multiplicity analysis in a non-isothermal CSTR for acid-catalyzed hydrolysis of acetic anhydride. Chemical Engineering & Technology, 33 (3). pp. 499-507. ISSN 0930-7516, DOI https://doi.org/10.1002/ceat.200900220.
Johan, Mohd Rafie and Suan, Mohd Shahadan Mohd and Hawari, Nor Liza and Ching, Hee Ay (2010) Annealing effects on the properties of copper oxide thin films prepared by chemical deposition. International Journal of Electrochemical Science, 6 (12). pp. 6094-6104. ISSN 1452-3981,
Jumaat, Mohd Zamin and Alam, Md Ashraful (2010) Experimental and numerical analysis of end anchored steel plate and CFRP laminate flexurally strengthened r. c. beams. International Journal of the Physical Sciences, 5 (2). pp. 132-144. ISSN 1992-1950,
Jumaat, Mohd Zamin and Kabir, M.H. and Obaydullah, M. (2010) Structural performance of reinforced concrete beams repairing from spalling. European Journal of Scientific Research, 45 (1). pp. 89-102. ISSN 1450216X,
Jumaat, Mohd Zamin and Rahman, M.M. and Alam, M.A. (2010) Flexural strengthening of RC continuous T beam using CFRP laminate: a review. International Journal of the Physical Sciences, 5 (6). pp. 619-625. ISSN 1992-1950,
Kadir, M.N.A. and Mekhilef, Saad and Ping, H.W. (2010) Dual vector control strategy for a three-stage hybrid cascaded multilevel inverter. Journal of Power Electronics, 10 (2). pp. 155-164. ISSN 1598-2092,
Kadir, M.N.A. and Mekhilef, Saad and Ping, H.W. (2010) Voltage vector control of a hybrid three-stage 18-level inverter by vector decomposition. IET Power Electronics, 3 (4). pp. 601-611. ISSN 1755-4543, DOI https://doi.org/10.1049/iet-pel.2009.0085.
Kadri, Nahrizul Adib and Ng, K.H. (2010) BIIJ embracing social media. Biomedical Imaging and Intervention Journal, 6 (1). ISSN 1823-5530,
Kalam, M.A. and Masjuki, Haji Hassan and Liaquat, A.M. and Jayed, M.H. and Nurul, F.M. (2010) Experimental study on jatrophapalm diesel blends as alternative fuels. In: 3rd International Symposium on Energy from Biomass and Waste, 08-11 Nov 2010, Venice, Italy.
Kamali, B. and Hashim, Roslan (2010) Bamboo foundation mat for rubble mound breakwaters on mud deposits. International Journal of the Physical Sciences, 5 (9). pp. 1406-1410. ISSN 1992-1950,
Kamali, B. and Hashim, Roslan and Akib, S. (2010) Efficiency of an integrated habitat stabilisation approach to coastal erosion management. International Journal of the Physical Sciences, 5 (9). pp. 1401-1405. ISSN 1992-1950,
Kareem, Mukhtar A. and Mjalli, Farouq Sabri and Hashim, Mohd Ali and AlNashef, Inas M. (2010) Phosphonium-based ionic liquids analogues and their physical properties. Journal of Chemical and Engineering Data, 55 (11). pp. 4632-4637. ISSN 0021-9568, DOI https://doi.org/10.1021/je100104v.
Karim, M.R. and Gnanendran, C.T. and Lo, S.C.R. and Mak, J. (2010) Predicting the long-term performance of a wide embankment on soft soil using an elastic-viscoplastic model. Canadian Geotechnical Journal, 47 (2). pp. 244-257. ISSN 0008-3674, DOI https://doi.org/10.1139/T09-087.
Karim, M.R. and Krabbenhoft, K. (2010) Extraction of effective cement paste diffusivities from X-ray microtomography scans. Transport in Porous Media, 84 (2). pp. 371-388. ISSN 0169-3913, DOI https://doi.org/10.1007/s11242-009-9506-y.
Karim, M.R. and Krabbenhoft, K. (2010) New renormalization schemes for conductivity upscaling in heterogeneous media. Transport in Porous Media, 85 (3). pp. 677-690. ISSN 0169-3913, DOI https://doi.org/10.1007/s11242-010-9585-9.
Karim, M.R. and Oka, F. (2010) An automatic time increment selection scheme for simulation of elasto-viscoplastic consolidation of clayey soils. Geomechanics and Geoengineering, 5 (3). pp. 153-177. ISSN 1748-6025, DOI https://doi.org/10.1080/17486020903576226.
Karim, Mohamed Rehan and Dehghani, A. (2010) Vehicle speed detection in video image sequences using CVS method. International Journal of the Physical Sciences, 5 (17). pp. 2555-2563. ISSN 1992-1950,
Kasman, M. and Ibrahim, S. (2010) Application of response surface methodology in optimization of cadmium adsorption by raw rice husk. In: 2010 International Conference on Environmental and Agriculture Engineering, ICEAE 2010, 2010, Kyoto.
Khalil, M. and Jan, B.M. and Abdul Raman, Abdul Aziz (2010) Fractional factorial design optimization of nontraditional completion fluid for perforation with underbalance. Chemistry and Technology of Fuels and Oils, 46 (5). pp. 340-350. ISSN 0009-3092,
Khan, M.M.A. and Ismail, M.F.B. and Dimyati, Kaharudin (2010) Interworking between WiMAX and UMTS to provide seamless services. International Journal of the Physical Sciences, 5 (6). pp. 852-864. ISSN 1992-1950,
Kow, S.T. and Yap, Y. and Pua, C.H. and Chong, W.Y. and Law, A.W.P. and Adikan, Faisal Rafiq Mahamd and Haseeb, A.S. Md. Abdul and Ahmad, Harith (2010) Selective area rare-earth doping of planar glass samples for monolithic integration of optically passive and active waveguides. Optik, 121 (8). pp. 722-725. ISSN 0030-4026, DOI https://doi.org/10.1016/j.ijleo.2008.11.003.
Kumoro, A.C. and Hasan, M. and Singh, H. (2010) Extraction of Sarawak black pepper essential oil using supercritical carbon dioxide. Arabian Journal for Science and Engineering, 35 (2B). pp. 7-16. ISSN 1319-8025,
Latif, A.A. and Zulkifli, M.Z. and Awang, N.A. and Harun, Sulaiman Wadi and Ahmad, Harith (2010) A simple linear cavity dual-wavelength fiber laser using AWG as wavelength selective mechanism. Laser Physics, 20 (11). pp. 2006-2010. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X10210061.
Latif, A.A. and Zulkifli, M.Z. and Hassan, N.A. and Harun, Sulaiman Wadi and Ghani, Z.A. and Ahmad, Harith (2010) A compact O-plus C-band switchable quad-wavelength fiber laser using arrayed waveguide grating. Laser Physics Letters, 7 (8). pp. 597-602. ISSN 1612-2011, DOI https://doi.org/10.1002/lapl.201010029.
Lau, C.K. and Heng, Y.S. and Hussain, Mohd Azlan and Mohamad Nor, M.I. (2010) Fault diagnosis of the polypropylene production process (UNIPOL PP) using ANFIS. ISA Trans, 49 (4). pp. 559-566. ISSN 1879-2022, DOI https://doi.org/10.1016/j.isatra.2010.06.007.
Leong, K.Y. and Saidur, Rahman and Kazi, S.N. and Mamun, A.H. (2010) Performance investigation of an automotive car radiator operated with nanofluid-based coolants (nanofluid as a coolant in a radiator). Applied Thermal Engineering, 30 (17-18). pp. 2685-2692. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2010.07.019.
Leow, R.S. and Moghavvemi, M. and Ibrahim, F. (2010) An efficient low-cost real-time brain computer interface system based on SSVEP. IEICE Electronics Express, 7 (5). pp. 326-331. ISSN 1349-2543, DOI https://doi.org/10.1587/Elex.7.326.
Liaquat, A.M. and Kalam, M.A. and Masjuki, Haji Hassan and Rezza, A. (2010) Emission characteristics of using different alternative fuels with petroleum diesel in a compression ignition (ci) engine. In: International Conference on Applied Energy (ICAE 2010), 21-23 Apr 2010, Singapore.
Lim, J.S. and Hussain, Mohd Azlan and Aroua, M.K. (2010) Control of a hydrolyzer in an oleochemical plant using neural network based controllers. Neurocomputing, 73 (16-18). pp. 3242-3255. ISSN 0925-2312, DOI https://doi.org/10.1016/j.neucom.2010.04.021.
Lim, Kok Sing and Moghaddam, M.R.A. and Harun, Sulaiman Wadi and Ahmad, Harith (2010) Tunable-spacing multi-wavelength yb-doped fiber laser (YDFL) based on temperature sensitive loop mirror. Lasers in Engineering, 20 (1-2). pp. 39-45. ISSN 0898-1507,
Lim, Kok Sing and Pua, Chang Hong and Harun, Sulaiman Wadi and Ahmad, Harith (2010) Temperature-sensitive dual-segment polarization maintaining fiber Sagnac loop mirror. Optics & Laser Technology, 42 (2). pp. 377-381. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2009.08.015.
Lokman, A. and Hamzah, A. and Huri, N.A.D. and Arof, Hamzah and Ahmad, F. and Ahmad, Harith and Harun, Sulaiman Wadi (2010) Single frequency erbium doped fiber laser with a highly doped erbium-doped fiber. Optoelectronics and Advanced Materials-Rapid Communications, 4 (11). pp. 1643-1646. ISSN 1842-6573,
Mahdiraji, Ghafour Amouzad and Abdullah, M.K. and Mohammadi, A.M. and Abas, A.F. and Mokhtar, M. and Zahedi, E. (2010) Duty-cycle division multiplexing (DCDM). Optics & Laser Technology, 42 (2). pp. 289-295. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2009.07.007.
Mahlia, Teuku Meurah Indra and Hor, C.G. and Masjuki, Haji Hassan and Husnawan, M. and Varman, M. and Mekhilef, Saad (2010) Clothes drying from room air conditioning waste heat: thermodynamics investigation. Arabian Journal for Science and Engineering, 35 (1B). pp. 339-351. ISSN 1319-8025,
Mahlia, Teuku Meurah Indra and Saidur, Rahman (2010) A review on test procedure, energy efficiency standards and energy labels for room air conditioners and refrigerator-freezers. Renewable and Sustainable Energy Reviews, 14 (7). pp. 1888-1900. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2010.03.037.
Mahlia, Teuku Meurah Indra and Saidur, Rahman and Husnawan, M. and Masjuki, Haji Hassan and Kalam, M.A. (2010) An approach to estimate the life-cycle cost of energy efficiency improvement of room air conditioners. Energy Education Science and Technology Part A: Energy Science and Research, 26 (1). pp. 1-11. ISSN 1308-772X,
Mahlia, Teuku Meurah Indra and Saidur, Rahman and Memon, Liaquat Ali and Zulkifli, N.W.M. and Masjuki, Haji Hassan (2010) A review on fuel economy standard for motor vehicles with the implementation possibilities in Malaysia. Renewable and Sustainable Energy Reviews, 14 (9). pp. 3092-3099. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2010.07.053.
Mahlia, Teuku Meurah Indra and Yanti, Padli Abdul Azis (2010) Cost efficiency analysis and emission reduction by implementation of energy efficiency standards for electric motors. Journal of Cleaner Production, 18 (4). pp. 365-374. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2009.11.005.
Mahrez, A. and Karim, Mohamed Rehan (2010) Fatigue characteristics of stone mastic asphalt mix reinforced with fiber glass. International Journal of the Physical Sciences, 5 (12). pp. 1840-1847. ISSN 1992-1950,
Malekmohammadi, A. and Abdullah, M.K. and Abas, A.F. and Mahdiraji, G.A. (2010) Effect of guard band on the performance of AP-DCDM technique in 40 Gb/s optical fiber communication system. In: Photonics (ICP), 2010 International Conference on, 2010.
Malekmohammadi, A. and Al-Mansoori, M.H. and Mahdiraji, G.A. and Abas, A.F. and Abdullah, M.K. (2010) Performance enhancement of absolute polar duty cycle division multiplexing with dual-drive mach zehnder-modulator in 40Gbit/s optical fiber communication systems. Optics Communications, 283 (16). pp. 3145-3148. ISSN 0030-4018, DOI https://doi.org/10.1016/j.optcom.2010.04.026.
Mamun, M.A.H. and Rahman, M.M. and Billah, M.M. and Saidur, Rahman (2010) A numerical study on the effect of a heated hollow cylinder on mixed convection in a ventilated cavity. International Communications in Heat and Mass Transfer, 37 (9). pp. 1326-1334. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2010.07.019.
Mamun, M.A.H. and Tanim, T.R. and Rahman, M.M. and Saidur, Rahman and Nagata, S. (2010) Mixed convection analysis in trapezoidal cavity with a moving lid. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 18-28. ISSN 1823-0334,
Mariappan, Saravanan and Ali, Faisal and Mohamad, Ashaari and Abdullah, Che Hassandi Abdullah and Hassan, N.R.N. and Chong, S. and Huat, Low Tian (2010) Undertaking loss reduction measures to prevent slope failures. Scientific Research and Essays, 5 (2). pp. 119-129. ISSN 1992-2248,
Matsumoto, T. and Takahashi, T. and Iwahashi, M. and Kimura, T. and Salbiah, S. and Mokhtar, Norrima (2010) Reduction of data size for transmission in localization of mobile robots. International Journal of the Physical Sciences, 5 (17). pp. 2652-2657. ISSN 1992-1950,
Mazandarani, A. and Mahlia, T.M.I. and Chong, W.T. and Moghavvemi, Mahmoud (2010) A review on the pattern of electricity generation and emission in Iran from 1967 to 2008. Renewable and Sustainable Energy Reviews, 14 (7). pp. 1814-1829. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2010.03.014.
Md Dawal, S.Z. (2010) CMTM10 investigation on upper limb and lower back muscles activities during sedentary work. In: World Engineering Congress 2010,Conference on Manufacturing Technology and Management, 2-5 August 2010, Kuching,Sarawak. (Unpublished)
Mekhilef, Saad (2010) Renewable energy resources and technologies practice in Malaysia. In: 5th International Symposium on Hydrocarbons & Chemistry (ISHC5), 23-25 May 2010, Sidi Fredj, Algiers.
Mekhilef, Saad and Chard, T.R. and Ramachandramurthy, V.K. (2010) Voltage rise due to inter-connection of embedded generators to distribution network. Journal of Scientific & Industrial Research, 69 (6). pp. 433-438. ISSN 0022-4456,
Mekhilef, Saad and Kadir, M.N.A. (2010) Voltage control of three-stage hybrid multilevel inverter using vector transformation. IEEE Transactions on Power Electronics, 25 (10). pp. 2599-2606. ISSN 0885-8993, DOI https://doi.org/10.1109/TPEL.2010.2051040.
Mjalli, Farouq Sabri and Al-Mfargi, A. (2010) Neural network-based heat and mass transfer coefficients for the hybrid modeling of fluidized reactors. Chemical Engineering Communications, 197 (3). pp. 318-342. ISSN 0098-6445, DOI https://doi.org/10.1080/00986440903088819.
Moghaddam, M.R.A. and Harun, Sulaiman Wadi and Shahi, S. and Lim, K.S. and Ahmad, Harith (2010) Comparisons of multi-wavelength oscillations using sagnac loop mirror and mach-zehnder interferometer for ytterbium doped fiber lasers. Laser Physics, 20 (2). pp. 516-521. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X10030138.
Mohamad, H. and Bakar, A.H.A. and Ping, H.W. and Mokhlis, Hazlie (2010) An adaptive controller of hydro generators for smart grid application in Malaysia. In: Power System Technology (POWERCON), 2010 International Conference on, 2010.
Mohamad Dom, Adibah Haneem and Jauhari, Iswadi and Yazdanparast, Sanaz and Mohd Khalid, Hidayah (2010) Embedment of HA/Ti composite on superplastic titanium alloy (Ti-6Al-4V). Materials Science and Engineering: A, 527 (21-22). pp. 5831-5836. ISSN 0921-5093, DOI https://doi.org/10.1016/j.msea.2010.05.064.
Mohammad Jafari, M. and Ahmed, S. and Md Dawal, S.Z. (2010) The relationship between project management and e-collaboration. In: International Conference on Industrial Engineering and Operations Management (IEOM2010) , January 9-10, Dhaka, Bangladesh.
Mohammed, H.A. and Campo, A. and Saidur, Rahman (2010) Experimental study of forced and free convective heat transfer in the thermal entry region of horizontal concentric annuli. International Communications in Heat and Mass Transfer, 37 (7). pp. 739-747. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2010.04.007.
Mohammed Mohammed, M. and Hashim, Roslan and Firas Salman, A. (2010) Effective improvement depth for ground treated with rapid impact compaction. Scientific Research and Essays, 5 (18). pp. 2686-2693. ISSN 19922248,
Mohd Ali, Darmawaty and Dimyati, Kaharudin (2010) On the Modelling of the Mobile WiMAX (IEEE 802.16e) Uplink Scheduler. Modelling and Simulation in Engineering, 2010. pp. 1-7. ISSN 1687-5591, DOI https://doi.org/10.1155/2010/804939.
Mokhlis, Hazlie and Bakar, A.H.A. and Talib, D.N.A. and Mohamad, H. (2010) The improvement of voltage sags pattern approach to locate a fault in distribution network. International Review of Electrical Engineering, 5 (3). pp. 1159-1164. ISSN 1827-6660,
Mokhlis, Hazlie and Li, H.Y. and Bakar, A.H.A. and Mohamad, H. (2010) Locating fault using voltage sags profile for underground distribution system. In: Power System Technology (POWERCON), 2010 International Conference on, 2010.
Mokhlis, Hazlie and Li, H.Y. and Khalid, A.R. (2010) The application of voltage sags pattern to locate a faulted section in distribution network. International Review of Electrical Engineering, 5 (1). pp. 173-179. ISSN 1827-6660,
Mokhlis, Hazlie and Li, H.Y. and Mohamad, H. and Bakar, A.H.A. (2010) A comprehensive fault location estimation using voltage sag profile for non-homogenous distribution networks. International Review of Electrical Engineering, 5 (5). pp. 2310-2316. ISSN 1827-6660,
Mokhtar, Norrima and Arof, Hamzah and Iwahashi, M. (2010) One dimensional image processing for eye tracking using derivative dynamic time warping. Scientific Research and Essays, 5 (19). pp. 2947-2952. ISSN 1992-2248,
Mustafa, Z. and Amin, I. and Nukman, Y. and Haider, N. and Haq, I. (2010) Laser cutting quality control of melamine using artificial neural networks. Asia Pacific Industrial Engineering and Management Systems Conference .
Naganathan, S. and Razak, H.A. and Hamid, S.N.A. (2010) Effect of kaolin addition on the performance of controlled low-strength material using industrial waste incineration bottom ash. Waste Management & Research, 28 (9). pp. 848-860. ISSN 0734-242X, DOI https://doi.org/10.1177/0734242x10355073.
Narmashiri, K. and Jumaat, Mohd Zamin (2010) Numerical study on strengthening composite bridges. Challenges, Opportunities and Solutions in Structural Engineering and Construction. pp. 241-246. ISSN 978-0-415-56809-8, DOI https://doi.org/10.1201/9780203859926.ch37.
Narmashiri, K. and Jumaat, Mohd Zamin and Sulong, N.H.R. (2010) Investigation on end anchoring of CFRP strengthened steel I-beams. International Journal of the Physical Sciences, 5 (9). pp. 1360-1371. ISSN 1992-1950,
Narmashiri, K. and Jumaat, Mohd Zamin and Sulong, N.H.R. (2010) Shear strengthening of steel I-beams by using CFRP strips. Scientific Research and Essays, 5 (16). pp. 2155-2168. ISSN 1992-2248,
Ng, Y.S. and Jayakumar, N.S. and Hashim, M.A. (2010) Performance evaluation of organic emulsion liquid membrane on phenol removal. Journal of Hazardous Materials, 184 (1-3). pp. 255-260. ISSN 0304-3894,
Nukman, Y. and Abu Osman, Noor Azuan and Khairi, S.O. and Harizam, M.Z. (2010) A study on laser cutting of textiles. International Congress on Applications of Lasers & Electro Optics.
Owlad, M. and Aroua, Mohamed Kheireddine and Daud, Wan Mohd Ashri Wan (2010) Hexavalent chromium adsorption on impregnated palm shell activated carbon with polyethyleneimine. Bioresource Technology, 101 (14). pp. 5098-5103. ISSN 0960-8524, DOI https://doi.org/10.1016/j.biortech.2010.01.135.
Pan, W.F. and Razak, H.A. (2010) Concrete performance using locally produced kaolin. Proceedings of Institution of Civil Engineers: Construction Materials, 163 (4). pp. 201-209. ISSN 1747-6518, DOI https://doi.org/10.1680/coma.900021.
Parvizi, R. and Harun, Sulaiman Wadi and Ali, N.M. and Ahmad, Harith (2010) Investigation on stimulated Brillouin scattering characteristics in a highly doped Bismuth-based Erbium-doped fiber. Laser Physics, 20 (11). pp. 1973-1977. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X10210103.
Parvizi, R. and Harun, Sulaiman Wadi and Shahabuddin, N.S. and Yusoff, Z. and Ahmad, Harith (2010) Multi-wavelength bismuth-based erbium-doped fiber laser based on four-wave mixing effect in photonic crystal fiber. Optics & Laser Technology, 42 (8). pp. 1250-1252. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2010.03.018.
Paul, M.C. and Harun, Sulaiman Wadi and Huri, N.A.D. and Hamzah, A. and Das, S. and Pal, M. and Bhadra, S.K. and Ahmad, Harith and Yoo, S. and Kalita, M.P. and Boyland, A.J. and Sahu, J.K. (2010) Performance comparison of Zr-based and Bi-based erbium-doped fiber amplifiers. Optics Letters, 35 (17). pp. 2882-2884. ISSN 0146-9592, DOI https://doi.org/10.1364/OL.35.002882.
Paul, M.C. and Harun, Sulaiman Wadi and Huri, N.A.D. and Hamzah, A. and Das, S. and Pal, M. and Bhadra, S.K. and Ahmad, Harith and Yoo, S. and Kalita, M.P. and Boyland, A.J. and Sahu, J.K. (2010) Wideband EDFA based on erbium doped crystalline zirconia yttria alumino silicate fiber. Journal of Lightwave Technology, 28 (20). pp. 2919-2924. ISSN 0733-8724, DOI https://doi.org/10.1109/JLT.2010.2070486.
Rahman, M.M. and Billah, M.M. and Mamun, M.A.H. and Saidur, Rahman and Hasanuzzaman, M. (2010) Reynolds and prandtl numbers effects on mhd mixed convection in a lid-driven cavity along with joule heating and a centered heat conducting circular block. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 163-170. ISSN 1823-0334 ,
Raval, R.R. and Ale Ebrahim, N. and Ahmed, S. and Taha, Z. (2010) Work together… when apart challenges and what is need for effective virtual teams. Journal of Information, Knowledge and Research in Business Management and Administration, 1 (1). pp. 1-3. ISSN 0975 – 671X,
Razak, H.A. and Naganathan, S. and Hamid, S.N.A. (2010) Controlled Low-Strength Material Using Industrial Waste Incineration Bottom Ash and Refined Kaolin. Arabian Journal for Science and Engineering, 35 (2B). pp. 53-67. ISSN 1319-8025,
Rusly, S.M. and Ibrahim, S. (2010) Adsorption of textile reactive dye by palm shell activated carbon: response surface methodology. World Academy of Science, Engineering and Technology, 43. pp. 892-895. ISSN 2010376X (ISSN),
Safiuddin, Md. and Jumaat, Mohd Zamin and Salam, M.A. and Islam, M.S. and Hashim, Roslan (2010) Utilization of solid wastes in construction materials. International Journal of Physical Sciences, 5 (13). pp. 1952-1963. ISSN 1992-1950,
Sahari, B.B. and Shahzamanian, M.M. and Bayat, M. (2010) CAME 56 - Comparsion of thermoelastic results in two types of functionally graded brake disks. In: World Engineering Congress 2010, Malaysia Conference on Aerospace and Mechanical Engineering , August 2-5, 2010, Kuching,Sarawak, Malaysia. (Unpublished)
Saidur, R. and Hasanuzzaman, M. and Rahim, N.A. (2010) Energy consumption, energy savings and emission analysis for industrial motors. In: International Conference on Industrial Engineering and Operations Management (IEOM2010) , January 9-10, Dhaka, Bangladesh.
Saidur, R. and Mekhilef, Saad (2010) Energy use, energy savings and emission analysis in the Malaysian rubber producing industries. Applied Energy, 87 (8). pp. 2746-2758. ISSN 0306-2619, DOI https://doi.org/10.1016/j.apenergy.2009.12.018.
Saidur, Rahman (2010) Energy, economics and environmental analysis for chillers in office buildings. Energy Education Science and Technology Part a-Energy Science and Research, 25 (1-2). pp. 1-16. ISSN 1308-772X,
Saidur, Rahman (2010) A review on electrical motors energy use and energy savings. Renewable and Sustainable Energy Reviews, 14 (3). pp. 877-898. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2009.10.018.
Saidur, Rahman and Abdelaziz, E.A. and Hasanuzzaman, M. and Mamun, M.A.H. (2010) A study of energy efficiency, economic and environmental benefits of a cooling tower. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 87-94. ISSN 18230334,
Saidur, Rahman and Ahamed, Jamal Uddin and Masjuki, Haji Hassan (2010) Energy, exergy and economic analysis of industrial boilers. Energy Policy, 38 (5). pp. 2188-2197. ISSN 0301-4215, DOI https://doi.org/10.1016/j.enpol.2009.11.087.
Saidur, Rahman and Hasanuzzaman, M. and Rahim, N.A. (2010) Energy use, energy savings and environmental analysis of industrial boilers and compressors. International Journal of Thermal & Environmental Engineering, 1 (1). pp. 29-36. ISSN 19237308, DOI https://doi.org/10.5383/ijtee.01.01.005.
Saidur, Rahman and Hasanuzzaman, M. and Yogeswaran, S. and Mohammed, H.A. and Hossain, M.S. (2010) An end-use energy analysis in a Malaysian public hospital. Energy, 35 (12). pp. 4780-4785. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2010.09.012.
Saidur, Rahman and Islam, M.R. and Rahim, N.A. and Solangi, K.H. (2010) A review on global wind energy policy. Renewable and Sustainable Energy Reviews, 14 (7). pp. 1744-1762. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2010.03.007.
Saidur, Rahman and Lai, Y.K. (2010) Parasitic energy savings in engines using nanolubricants. Energy Education Science and Technology Part a-Energy Science and Research, 26 (1). pp. 61-74. ISSN 1308-772X,
Saidur, Rahman and Mahlia, Teuku Meurah Indra (2010) Energy, economic and environmental benefits of using high-efficiency motors to replace standard motors for the Malaysian industries. Energy Policy, 38 (8). pp. 4617-4625. ISSN 0301-4215, DOI https://doi.org/10.1016/j.enpol.2010.04.017.
Saidur, Rahman and Rahim, N.A. and Hasanuzzaman, M. (2010) A review on compressed-air energy use and energy savings. Renewable and Sustainable Energy Reviews, 14 (4). pp. 1135-1153. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2009.11.013.
Sajedi, F. and Abdul Razak, H. (2010) Relationship between 7 and 28 days CSS1 for HSC2 by use of ANN3 and regression methods. Asian Journal of Civil Engineering, 11 (2). pp. 207-218. ISSN 15630854 ,
Sajedi, F. and Razak, Hashim Abdul (2010) The effect of chemical activators on early strength of ordinary Portland cement-slag mortars. Construction and Building Materials, 24 (10). pp. 1944-1951. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2010.04.006.
Sajedi, Fathollah and Razak, Hashim Abdul (2010) Thermal activation of ordinary Portland cement-slag mortars. Materials & Design, 31 (9). pp. 4522-4527. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2010.04.011.
Salih, A.L. and Moghavvemi, M. and Mohamed, H.A.F. and Gaeid, K.S. (2010) Flight PID controller design for a UAV quadrotor. Scientific Research and Essays, 5 (23). pp. 3660-3667. ISSN 19922248,
Salih, A.L. and Moghavvemi, M. and Mohamed, H.A.F. and Gaeid, K.S. (2010) Modelling and PID controller design for a quadrotor unmanned air vehicle. In: 17th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2010, 28-30 May 2010, Cluj-Napoca, Romania.
Salman, F.A. and Fattah, M.Y. and Mohammed, M.M. and Hashim, Roslan (2010) Numerical investigation on reinforcement requirement for piles embedded in clay. Scientific Research and Essays, 5 (18). pp. 2731-2741. ISSN 19922248,
Sarmani, A.R. and Sheih, S.J. and Adikan, Faisal Rafiq Mahamd and Mahdi, M.A. (2010) Spectral gain characteristics induced by 980 nm pumping band in a gain-Flattened EDFA. Laser Physics, 20 (9). pp. 1824-1828. ISSN 1054-660X,
Seeme, Fatima Bilkis and Arafat, Abdullah Omar and Dimyati, Kaharudin (2010) QoS improvement for multimedia traffic in WLANs with TTN approach. International Journal of the Physical Sciences, 5 (6). pp. 847-851. ISSN 1992-1950,
Shafeeyan, M.S. and Daud, Wan Mohd Ashri Wan and Houshmand, A. and Shamiri, Ahmad (2010) A review on surface modification of activated carbon for carbon dioxide adsorption. Journal of Analytical and Applied Pyrolysis, 89. pp. 143-151. ISSN 0165-2370, DOI https://doi.org/10.1016/j.jaap.2010.07.006.
Shafigh, P. and Jumaat, Mohd Zamin and Mahmud, H. (2010) Mix design and mechanical properties of oil palm shell lightweight aggregate concrete: a review. International Journal of the Physical Sciences, 5 (14). pp. 2127-2134. ISSN 1992-1950,
Shahi, S. and Harun, Sulaiman Wadi and Norizan, S.F. and Moghaddam, M.R.A. and Ahmad, Harith (2010) Brillouin-raman multi-wavelength laser comb generation based on BI-EDF by using dual-wavelength in dispersion compensating fiber. Journal of Nonlinear Optical Physics & Materials, 19 (1). pp. 123-130. ISSN 0218-8635, DOI https://doi.org/10.1142/S0218863510005108.
Shahi, Sharifeh and Harun, Sulaiman Wadi and Dimyati, Kaharudin and Tamjis, Mohamad Rom and Ahmad, Harith (2010) Multiple brillouin stokes generation with bismuth-based erbium-doped fiber. Microwave and Optical Technology Letters, 52 (6). pp. 1416-1418. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.25207.
Shahi, Sharifeh and Khorvash, M. and Harun, Sulaiman Wadi and Ahmad, Harith and Golnabi, Hossein (2010) The temperature distribution eximer laser source (193 nm) within a human eye and review on some side-effects. Australian Journal of Basic and Applied Sciences, 4 (5). pp. 724-730. ISSN 1991-8178,
Shahidul Islam, M. and Hashim, Roslan (2010) Stabilization of peat soil by soil-column technique and settlement of the group columns. International Journal of Physical Sciences, 5 (9). pp. 1411-1418. ISSN 19921950,
Shahla, Sanaz and Ngoh, Gek Cheng and Yusoff, Rozita (2010) An overview on transesterification of natural oils and fats. Biotechnology and Bioprocess Engineering, 15 (6). pp. 891-904. ISSN 1226-8372, DOI https://doi.org/10.1007/s12257-009-3157-2.
Shahriari, Amidaddin and Bakar, Ab Halim Abu and Mokhlis, Hazlie (2010) Comparative studies on Non-Divergent Load flow methods in well, ill and unsolvable condition. In: Power System Technology (POWERCON), 2010 International Conference on, 2010.
Shamiri, A. and Hussain, Mohd Azlan and Mjalli, F.S. and Mostoufi, N. (2010) Different hydrodynamic model for gas-phase propylene polymemation in a catalytic fluidized bed reactor. In: 2nd International Conference on Chemical, Biological and Environmental Engineering, ICBEE 2010, 2010, Cairo.
Shamiri, A. and Hussain, Mohd Azlan and Mjalli, F.S. and Mostoufi, N. (2010) Kinetic modeling of propylene homopolymerization in a gas-phase fluidized-bed reactor. Chemical Engineering Journal, 161 (1-2). pp. 240-249. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2010.04.037.
Sisamouth, L. and Abd Shukor, Mohd Hamdi and Ariga, T. (2010) Investigation of gap filling ability of Ag-Cu-In brazing filler metals. Journal of Alloys and Compounds, 504 (2). pp. 325-329. ISSN 0925-8388,
Sua, Y.M. and Chong, W.Y. and Tan, C.C. and Ahmad, Harith and Adikan, Faisal Rafiq Mahamd (2010) Effect of using aqueous/alcohol solution during solution doping on the physical and chemical characteristics of pre-sintered silica soot and the resultant native glass species concentration. Materials Chemistry and Physics, 124 (2-3). pp. 1077-1082. ISSN 0254-0584,
Sulaiman, N.M.N. and Ibrahim, S. and Abdullah, S.L. (2010) Membrane Bioreactor for the treatment of natural rubber wastewater. International Journal of Environmental Engineering, 2 (1-3). pp. 92-109. ISSN 1756-8463, DOI https://doi.org/10.1504/IJEE.2010.029823.
Sulaiman, S. and Abdul Raman, Abdul Aziz and Aroua, Mohamed Kheireddine (2010) Coconut waste as a source for biodiesel production. In: 2nd International Conference on Chemical, Biological and Environmental Engineering, ICBEE 2010, 2010, Cairo.
Taha, Z. and Passarella, R. and How, H.X. and Md Sah, J. and Ahmad, N. and Ghazilla, R. and Yap, H.J. (2010) Application of data acquisition and telemetry system into a solar vehicle. In: 2010 Second International Conference on Computer Engineering and Applications, 19-21 March 2010, Bali, Indonesia.
Tajally, Mohammad and Huda, Zainul and Masjuki, Haji Hassan (2010) A comparative analysis of tensile and impact-toughness behavior of cold-worked and annealed 7075 aluminum alloy. International Journal of Impact Engineering, 37 (4). pp. 425-432. ISSN 0734-743X,
Tay, S.L. and Haseeb, A.S. Md. Abdul and Johan, Mohd Rafie (2010) Effect of addition cobalt nanoparticles on Sn-Ag-Cu lead-free solder. In: Electronics Packaging Technology Conference, 9-10 December 2010, Singapore.
Ustun, T.S. and Mekhilef, Saad (2010) Design and implementation of static synchronous series compensator with a soft-switching H-bridge inverter with DSP-based synchronization control. International Review of Electrical Engineering, 5 (4). pp. 1347-1353. ISSN 1827-6660,
Ustun, T.S. and Mekhilef, Saad (2010) Effects of a static synchronous series compensator (SSSC) based on a soft switching 48-pulse PWM inverter on the power demand from the grid. Journal of Power Electronics, 10 (1). pp. 85-90. ISSN 15982092,
Varman, M. and Miyafuji, H. and Saka, S. (2010) Fractionation and characterization of oil palm (Elaeis guineensis) as treated by supercritical water. Journal of Wood Science, 56 (6). pp. 484-494. DOI https://doi.org/10.1007/s10086-010-1124-3.
Veny, H. and Aroua, M.K. and Sulaiman, N.M.N. (2010) Solvent free enzymatic transesterification of crude jatropha oil in packed bed reactor. In: 2nd International Conference on Chemical, Biological and Environmental Engineering, ICBEE 2010, 2010, Cairo.
Wazed, M.A. and Ahmed, Shamsuddin and Yusoff, Nukman (2010) Impacts of common components in multistage production system under uncertain conditions. In: International Conference on Industrial Engineering and Operations Management (IEOM2010), 9-10 January 2010, Dhaka, Bangladesh.
Wazed, M.A. and Ahmed, Shamsuddin and Yusoff, Nukman (2010) Impacts of common processes in multistage production system under machine breakdown and quality uncertainties. African Journal of Business Management, 4 (6). pp. 979-986. ISSN 1993-8233,
Whaad, A.M. and Adam, N.M. and Sapuan, S.M. and Saidur, Rahman (2010) Effect of selected shading devices on office room temperature. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 236-243. ISSN 18230334,
Wong, Y.H. and Cheong, K.Y. (2010) ZrO2 thin films on Si substrate. Journal of Materials Science: Materials in Electronics, 21 (10). pp. 980-993. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-010-0144-5.
Yang, H.Z. and Harun, Sulaiman Wadi and Ahmad, Harith (2010) Displacement sensing with two asymmetrical inclined fibers. Microwave and Optical Technology Letters, 52 (6). pp. 1271-1274. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.25173.
Yang, Hang Zhou and Lim, Kok Sing and Harun, Sulaiman Wadi and Dimyati, Kaharudin and Ahmad, Harith (2010) Enhanced bundle fiber displacement sensor based on concave mirror. Sensors and Actuators A: Physical, 162 (1). pp. 8-12. ISSN 0924-4247, DOI https://doi.org/10.1016/j.sna.2010.05.029.
Yasin, M. and Harun, Sulaiman Wadi and Apsari, R. and Suhariningsih, - and Kusminarto, - and Karyono, - and Ahmad, Harith (2010) Detection of tea concentration macerated onto the artificial teeth using fiber optic displacement sensor. Optoelectronics and Advanced Materials, Rapid Communications, 4 (2). pp. 141-143. ISSN 1842-6573,
Yasin, M. and Harun, Sulaiman Wadi and Kusminarto, - and Karyono, - and Lelono, D. and Samian, - and Zaidan, A.H. and Ahmad, Harith (2010) Effect of tilting angles on the performance of reflective and transmitting types of fiber optic-based displacement sensors. Laser Physics, 20 (4). pp. 824-829. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X10070352.
Yasin, M. and Harun, Sulaiman Wadi and Kusminarto, D. and Ahmad, Harith (2010) A simple design of vibration sensor using fiber optic displacement sensor. Optoelectronics and Advanced Materials, Rapid Communications, 4 (11). pp. 1795-1797. ISSN 1842-6573,
Yasin, M. and Harun, Sulaiman Wadi and Pujiyanto, A. and Ghani, Z.A. and Ahmad, Harith (2010) Performance comparison between plastic-based fiber bundle and multimode fused coupler as probes in displacement sensors. Laser Physics, 20 (10). pp. 1890-1893. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X10190199.
Yasin, M. and Harun, Sulaiman Wadi and Yang, H.Z. and Ahmad, Harith (2010) Fiber optic displacement sensor for measurement of glucose concentration in distilled water. Optoelectronics and Advanced Materials, Rapid Communications, 4 (8). pp. 1063-1065. ISSN 1842-6573,
Yau, Y.H. (2010) Development and application of an indoor environmental quality audit to hospital ward in the tropics. In: International on Indoor Air Quality Ventilation and Energy Conservation in Buildings, 15-18 Aug 2010, New York, USA.
Yau, Yat Huang and Ahmadzadehtalatapeh, M. (2010) Experimental investigation of the thermal performance of an air-to-air horizontal heat pipe heat exchanger. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 29-35. ISSN 1823-0334,
Yazid, H. and Arof, Hamzah and Mokhtar, Norrima (2010) Edge sharpening for diabetic retinopathy detection. In: 2010 IEEE International Conference on Cybernetics and Intelligent Systems, CIS 2010, 2010, Singapore.
Yin, C.Y. and Aroua, M.K. and Daud, W.M.A.W. (2010) Metal-polyethyleneimine-activated carbon interaction parameter at equilibrium adsorption capacity. Journal of Applied Sciences, 10 (12). pp. 1192-1195. ISSN 1812-5654,
Yong, T.C. and Singh, R. and Liang, A.K. and Hong, Y.W. (2010) Sintering behavior of hydroxyapatite ceramics prepared by different routes. Ceramic Engineering and Science Proceedings, 30 . Engineering, pp. 127-137.
Younis, M.A.A. and Rahim, N.A. and Mekhilef, Saad (2010) High efficiency THIPWM three-phase inverter for grid connected system. In: 2010 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2010, Penang.
Yusoff, N.M. and Abu Bakar, M.H. and Sheih, S.J. and Adikan, Faisal Rafiq Mahamd and Mahdi, M.A. (2010) Gain-flattened erbium-doped fiber amplifier with flexible selective band for optical networks. Laser Physics, 20 (8). pp. 1747-1751. ISSN 1054-660X,
Zabeti, M. and Daud, W.M.A.W. and Aroua, M.K. (2010) Biodiesel production using alumina-supported calcium oxide: An optimization study. Fuel Processing Technology, 91 (2). pp. 243-248. ISSN 0378-3820, DOI https://doi.org/10.1016/j.fuproc.2009.10.004.
Zainudin, H.N. and Mekhilef, S. (2010) Comparison study of maximum power point tracker techniques for PV systems. In: Proceedings of the 14th International Middle East Power Systems Conference (MEPCON'10), Cairo University, Egypt, Cairo University, Egypt.
Zehra, E.J.A. and Moghavvemi, M. and Hashim, M.M.I. and Kashem, M. (2010) Network reconfiguration using PSAT for loss reduction in distribution systems. In: 2010 1st International Conference on Energy, Power and Control, EPC-IQ01 2010, 30 November 2010 - 2 December 2010, Basrah, Iraq.
Zulkifli, M.Z. and Hassan, N.A. and Awang, N.A. and Ghani, Z.A. and Harun, Sulaiman Wadi and Ahmad, Harith (2010) Multi-wavelength fiber laser in the S-band region using a Sagnac loop mirror as a comb generator in an SOA gain medium. Laser Physics Letters, 7 (9). pp. 673-676. ISSN 1612-2011, DOI https://doi.org/10.1002/lapl.201010046.
