Items where Division is "Faculty of Engineering" and Year is 2010

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 184.

Article

Abdul Rahim, H.; Ibrahim, F.; Taib, M.N. (2010) System identification of nonlinear autoregressive models in monitoring dengue infection. International Journal on Smart Sensing and Intelligent Systems, 3 (4). pp. 783-806. ISSN 11785608

Abioye, O.P.; Agamuthu, P.; Abdul Aziz, A. (2010) Phytoaccumulation of zinc and iron by jatropha curcas grown in used lubricating oil-contaminated soil. Malaysian Journal of Science, 29 (3). pp. 207-213. ISSN 13943065 (ISSN)

Abioye, P.O.; Aziz, A.A.; Agamuthu, P. (2010) Enhanced biodegradation of used engine oil in soil amended with organic wastes. Water Air and Soil Pollution, 209 (1-4). pp. 173-179. ISSN 0049-6979

Abu Osman, N.A.; Spence, W.D.; Solomonidis, S.E.; Paul, J.P.; Weir, A.M. (2010) Transducers for the determination of the pressure and shear stress distribution at the stump-socket interface of trans-tibial amputees. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 224 (8). pp. 1239-1250. ISSN 2041-2975

Abu Osman, N.A.; Spence, W.D.; Solomonidis, S.E.; Paul, J.P.; Weir, A.M. (2010) The patellar tendon bar! Is it a necessary feature? Medical Engineering & Physics, 32 (7). pp. 760-765. ISSN 1350-4533

Affandi, N.A.M.; Kamali, B.; Mz, R.; Tamin, N.M.; Hashim, R. (2010) Early growth and survival of Avicennia alba seedlings under excessive sedimentation. Scientific Research and Essays, 5 (18). pp. 2801-2805. ISSN 1992-2248

Agamuthu, P.; Abioye, O.P.; Aziz, A.A. (2010) Phytoremediation of soil contaminated with used lubricating oil using Jatropha curcas. Journal of Hazardous Materials, 179 (1-3). pp. 891-894. ISSN 0360-3199

Ahamed, J.U.; Bhuiya, M.M.K.; Saidur, R.; Masjuki, H.H.; Sarkar, M.A.R.; Sayem, A.S.M.; Islam, M. (2010) Forced convection heat transfer performance of porous twisted tape insert. Engineering e-Transaction, 5 (2). pp. 67-79. ISSN 1823-6379

Ahamed, J.U.; Saidur, R.; Masjuki, H.H. (2010) Thermodynamic performance analysis of R-600 and R-600a as refrigerant. Engineering e-Transaction, 5 (1). pp. 11-18. ISSN 1823-6379

Ahmady, A.; Hashim, M.A.; Aroua, M.K. (2010) Experimental investigation on the solubility and initial rate of absorption of CO2 in aqueous mixtures of methyldiethanolamine with the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate. Journal of Chemical and Engineering Data, 55 (12). pp. 5733-5738. ISSN 00219568

Al-Alimi, A.W.; Al-Mansoori, M.H.; Abas, A.F.; Mahdi, M.A.; Ajiya, M.; Adikan, F.R.M. (2010) Efficient technique for intracavity loss optimization in a dual-wavelength erbium-doped fiber laser. Laser Physics, 20 (11). pp. 2001-2005. ISSN 1054-660X

Ale Ebrahim, N.; Ahmed, S.; Taha, Z. (2010) Critical factors for new product developments in SMEs virtual team. African Journal of Business Management, 4 (11). pp. 2247-2257. ISSN 1993-8233

Ale Ebrahim, N.; Ahmed, S.; Taha, Z. (2010) Virtual R&D teams and SMEs growth: A comparative study between Iranian and Malaysian SMEs. African Journal of Business Management, 4 (11). pp. 2368-2379. ISSN 1993-8233

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2010) SMEs, virtual research and development (R&D) teams and new product development: a literature review. International Journal of the Physical Sciences, 5 (7). pp. 916-930. ISSN 1992-1950

Alengaram, U.J.; Mahmud, H.; Jumaat, M.Z. (2010) Comparison of mechanical and bond properties of oil palm kernel shell concrete with normal weight concrete. International Journal of the Physical Sciences, 5 (8). pp. 1231-1239. ISSN 1992-1950

Alengaram, U.J.; Mahmud, H.; Jumaat, M.Z.; Shirazi, S.M. (2010) Effect of aggregate size and proportion on strength properties of palm kernel shell concrete. International Journal of the Physical Sciences, 5 (12). pp. 1848-1856. ISSN 1992-1950

Ali, F.H.; Sing, W.L.; Hashim, R. (2010) Engineering properties of improved fibrous peat. Scientific Research and Essays, 5 (2). pp. 154-169. ISSN 1992-2248

Amiri-Khorasani, M.; Osman, N.A.A.; Yusof, A. (2010) Electromyography assessments of the vastus medialis muscle during soccer instep kicking between dynamic and static stretching. Journal of Human Kinetics, 24. pp. 35-41. ISSN 1640-5544

Ar-Rawi, A.H.; Moghavvemi, M.; Ibrahim, W. (2010) Novel idea to monitor and measure blood hemoglobin noninvasively. African Journal of Biotechnology, 9 (54). pp. 9295-9305. ISSN 16845315

Atadashi, I.M.; Aroua, M.K.; Aziz, A.A. (2010) High quality biodiesel and its diesel engine application: a review. Renewable & Sustainable Energy Reviews, 14 (7). pp. 1999-2008.

Baroutian, S.; Aroua, M.K.; Raman, A.A.A.; Sulaiman, N.M.N. (2010) Methanol recovery during transesterification of palm oil in a TiO 2/Al2O3 membrane reactor: Experimental study and neural network modeling. Separation and Purification Technology, 76 (1). pp. 58-63. ISSN 1383-5866

Baroutian, S.; Aroua, M.K.; Raman, A.A.A.; Sulaiman, N.M.N. (2010) Methanol recovery during transesterification of palm oil in a TiO2/Al2O3 membrane reactor: experimental study and neural network modeling. Separation and Purification Technology, 76 (1). pp. 58-63.

Baroutian, S.; Aroua, M.K.; Raman, A.A.A.; Sulaiman, N.M.N. (2010) Potassium hydroxide catalyst supported on palm shell activated carbon for transesterification of palm oil. Fuel Processing Technology, 91 (11). pp. 1378-1385. ISSN 0378-3820

Baroutian, S.; Aroua, M.K.; Raman, A.A.A.; Sulaiman, N.M.N. (2010) Viscosities and densities of binary and ternary blends of palm oil plus palm biodiesel plus diesel fuel at different temperatures. Journal of Chemical and Engineering Data, 55 (1). pp. 504-507.

Che Hassan, C.R.; Puvaneswaran, B.; Raman, A.A.A.; Noor Zalina, M.; Hung, F.C.; Sulaiman, N.M. (2010) Quantitative risk assessment for the transport for ammonia by rail. Journal of Process Safety Progress, 29 (1). pp. 61-63.

Chitsazan, I.; Kobraei, M.; Jumaat, M.Z.; Shafigh., P. (2010) An experimental study on the flexural behaviour of FRP RC bemas and comparison of the ultimate moment capacity with ACI. Journal of Civil Engineering and Construction Technology, 1 (2). pp. 27-42. ISSN 2141-2634

Cui, M.; Jang, M.; Cho, S.H.; Khim, J. (2010) Kinetic and thermodynamic studies of the adsorption of heavy metals on to a new adsorbent: coal mine drainage sludge. Environmental Technology, 31 (11). pp. 1203-1211. ISSN 0959-3330

Dahalan, W.M.; Mokhlis, H.B (2010) Techniques of network reconfiguration for service restoration in shipboard power system: a review. Australian Journal of Basic and Applied Sciences, 4 (11). pp. 5556-5563. ISSN 1991-8178

Deboucha, S.; Hashim, R. (2010) Effect of OPC and PFA cement on stabilised peat bricks. International Journal of the Physical Sciences, 5 (11). pp. 1671-1677. ISSN 1992-1950

Dhakshyani, R.; Nukman, Y.; Abu Osman, N.A.; Merican, A.M.; George, J. (2010) Rapid prototyping medical models for dysplastic hip orthopaedic surgery. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 224 (B5). pp. 769-776. ISSN 0954-4054

Dhananjaya, H.R.; Nagabhushanam, J.; Pandey, P.C.; Jumaat, M.Z. (2010) New twelve node serendipity quadrilateral plate bending element based on mindlin-reissner theory using integrated force method. Structural Engineering and Mechanics, 36 (5). pp. 625-642. ISSN 1225-4568

Faisal, T.; Ibrahim, F.; Taib, M.N. (2010) A noninvasive intelligent approach for predicting the risk in dengue patients. Expert Systems with Applications, 37 (3). pp. 2175-2181. ISSN 0957-4174

Faisal, T.; Taib, M.N.; Ibrahim, F. (2010) Reexamination of risk criteria in dengue patients using the self-organizing map. Medical and Biological Engineering and Computing, 48 (3). pp. 293-301. ISSN 0140-0118

Fayyadh, M. M.; Razak, H. A.; Akib, S. (2010) Ultimate capacity and reinforcement area requirement for bridge girder using various FRP re-bars. International Journal of the Physical Sciences, 5 (17). pp. 2635-2641. ISSN 1992-1950

Fazal, M.A.; Haseeb, A.S.M.A.; Masjuki, H.H. (2010) Comparative corrosive characteristics of petroleum diesel and palm biodiesel for automotive materials. Fuel Processing Technology, 91 (10). pp. 1308-1315.

Ghafari, S.; Aroua, M.K.; Hasan, M. (2010) Control of pH during water denitrification in an upflow bio-electrochemical reactor (UBER) using a pumparound system. Separation and Purification Technology, 72 (3). pp. 401-405. ISSN 1383-5866

Ghafari, S.; Hasan, M.; Aroua, M.K. (2010) A kinetic study of autohydrogenotrophic denitrification at the optimum pH and sodium bicarbonate dose. Bioresource Technology, 101 (7). pp. 2236-2242. ISSN 0960-8524

Gunnasegaran, P.; Mohammed, H.A.; Shuaib, N.H.; Saidur, R. (2010) The effect of geometrical parameters on heat transfer characteristics of microchannels heat sink with different shapes. International Communications in Heat and Mass Transfer, 37 (8). pp. 1078-1086. ISSN 0735-1933

Hamdi bin Abdul Shukor, M; Toque, JA; Ide-Ektessabi, A (2010) Wear characteristics and adhesion behavior of calcium phosphate thin-films. Key Engineering Materials, 443. pp. 469-474. ISSN 0878492674

Hasan, M. M.; Haseeb, A. S. M. A.; Saidur, R.; Masjuki, H. H.; Hamdi, M. (2010) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO 2 thin films. Optical Materials, 32 (6). pp. 690-695. ISSN 0925-3467

Hasan, M. M.; Haseeb, A.S.M.A.; Masjuki, H. H.; Saidur, R.; Hamdi, M. (2010) Influence of substrate temperatures on structural, morphological and optical properties of rf-sputtered anatase TiO2 films. Arabian Journal for Science and Engineering, 35 (1C). pp. 147-156. ISSN 1319-8025

Hasan, M.M.; Haseeb, A.S.M.A.; Masjuki, H.H.; Saidur, R. (2010) Adhesion and wear behavior of nanostructured titanium oxide thin films. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 5-10. ISSN 1823-0334

Hasan, M.M.; Haseeb, A.S.M.A.; Masjuki, H.H.; Saidur, R.; Hamdi, M. (2010) Influence of substrate temperatures on structural, morphological and optical properties of RF-sputtered anatase Tio 2 films. Arabian Journal for Science and Engineering, 35 (1 C). pp. 147-156. ISSN 1319-8025

Hasan, M.M.; Haseeb, A.S.M.A.; Saidur, R.; Masjuki, H.H.; Hamdi, M. (2010) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO2 thin films. Optical Materials, 32 (6). pp. 690-695. ISSN 0925-3467

Hasan, MM; Haseeb, A.; Saidur, R.; Masjuki, HH; Hamdi, M. (2010) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO< sub> 2</sub> thin films. Optical Materials, 32 (6). pp. 690-695. ISSN 0925-3467

Hasan, MM; Haseeb, ASMA; Saidur, R; Masjuki, HH; Hamdi, M. (2010) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO thin films. Optical Materials, 32 (6). pp. 690-695. ISSN 0925-3467

Haseeb, A.S.M.A.; Hasan, M.M.; Masjuki, H.H. (2010) Structural and mechanical properties of nanostructured TiO2 thin films deposited by RF sputtering. Surface & Coatings Technology, 205 (2). pp. 338-344. ISSN 0257-8972

Haseeb, A.S.M.A.; Masjuki, H.H.; Ann, L.J.; Fazal, M.A. (2010) Corrosion characteristics of copper and leaded bronze in palm biodiesel. Fuel Processing Technology, 91 (3). pp. 329-334. ISSN 0378-3820

Haseeb, A.S.M.A.; Masjuki, H.H.; Siang, C.T.; Fazal, M.A. (2010) Compatibility of elastomers in palm biodiesel. Renewable Energy, 35 (10). pp. 2356-2361. ISSN 0960-1481

Haseeb, A.S.M.A.; Sia, S.Y.; Fazal, M.A.; Masjuki, H.H. (2010) Effect of temperature on tribological properties of palm biodiesel. Energy, 35 (3). pp. 1460-1464. ISSN 0360-5442

Hashim, R.; Kamali, B.; Tamin, N.M.; Zakaria, R. (2010) An integrated approach to coastal rehabilitation: Mangrove restoration in Sungai Haji Dorani, Malaysia. Estuarine Coastal and Shelf Science, 86 (1). pp. 118-124. ISSN 0272-7714

Hassan, L.H; Moghavvemi, M.; Mohamed, H.A.F (2010) Takagi-sugeno fuzzy gains scheduled PI controller for enhancement of power system stability. American Journal of Applied Sciences, 7 (1). pp. 145-152. ISSN 15469239

Hassan, L.H.; Moghavvemi, M.; Mohamed, H.A.F. (2010) Power system oscillations damping using unified power flow controller-based stabilizer. American Journal of Applied Sciences, 7 (10). pp. 1393-1395. ISSN 15469239

Hatanaka, N.; IIzuka, T.; IIzuka, T.; Takakura, N.; Yamaguchi, K.; Hassan, M.A. (2010) Friction aided deep drawing of aluminum sheet using blank holder divided into four segments. Keikinzoku/Journal of Japan Institute of Light Metals, 60 (7). pp. 315-320. ISSN 1880-8018

Hussain, M.A.; Aroua, M.K.; Yin, Chun-Yang; Rahman, R.A.; Ramli, N.A. (2010) Hybrid neural network for prediction of CO 2 solubility in monoethanolamine and diethanolamine solutions. Korean Journal of Chemical Engineering, 27 (6). pp. 1864-1867. ISSN 0256-1115

Hussain, Mohd Azlan; Aroua, Mohamed Kheireddine; Yin, Chun-Yang; Rahman, Ramzalina Abd; Ramli, Noor Asriah (2010) Hybrid neural network for prediction of CO2 solubility in monoethanolamine and diethanolamine solutions. Korean Journal of Chemical Engineering, 27 (6). pp. 1864-1867. ISSN 0256-1115

Ibrahim, F.; Faisal, T.; Mohamad Salim, M. I.; Taib, M. N. (2010) Non-invasive diagnosis of risk in dengue patients using bioelectrical impedance analysis and artificial neural network. Medical and Biological Engineering and Computing, 48 (11). pp. 1141-1148. ISSN 0140-0118

Islam, A.B.M.S.; Ahmad, S.I.; Jameel, M.; Jumaat, M.Z. (2010) Seismic base isolation for buildings in regions of low to moderate seismicity: practical alternative design. Practice Periodical on Structural Design and Construction, 17 (1). pp. 13-20. ISSN 1084-0680

Islam, M.S.; Hashim, R. (2010) Behaviour of stabilised peat: a field study. Scientific Research and Essays, 5 (17). pp. 2366-2374. ISSN 1992-2248

Islam, MR; Saidur, R.; Rahim, NA; Solangi, KH (2010) Usage of solar energy and its status in Malaysia. Engineering e-Transaction, 5 (1). pp. 6-10. ISSN 1823-6379

Issabayeva, G.; Aroua, M.K.; Sulaiman, N.M. (2010) Study on palm shell activated carbon adsorption capacity to remove copper ions from aqueous solutions. Desalination, 262 (1-3). pp. 94-98. ISSN 0011-9164

Jahirul, M. I.; Masjuki, H. H.; Saidur, R.; Kalam, M. A.; Jayed, M. H.; Wazed, M. A. (2010) Comparative engine performance and emission analysis of CNG and gasoline in a retrofitted car engine. Applied Thermal Engineering, 30 (14-15). pp. 2219-2226. ISSN 1359-4311

Jahirul, M. I.; Saidur, R.; Masjuki, H. H. (2010) Predictability of artificial neural network (ANN) in performance prediction of a retrofitted CNG engine. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 268-275. ISSN 1823-0334

Jang, M. (2010) Application of portable X-ray fluorescence (pXRF) for heavy metal analysis of soils in crop fields near abandoned mine sites. Environmental Geochemistry and Health, 32 (3). pp. 207-216. ISSN 0269-4042

Jang, M.; Lee, H.J.; Shim, Y. (2010) Rapid removal of fine particles from mine water using sequential processes of coagulation and flocculation. Environmental Technology, 31 (4). pp. 423-432. ISSN 0959-3330

Jumaat, M.Z.; Alam, M.D.A. (2010) Experimental and numerical analysis of end anchored steel plate and CFRP laminate flexurally strengthened reinforced concrete (rc) beams. International Journal of the Physical Sciences, 5 (2). pp. 132-144. ISSN 1992 - 1950

Jumaat, M.Z.; Kabir, M.H.; Obaydullah, M. (2010) Structural performance of reinforced concrete beams repairing from spalling. European Journal of Scientific Research, 45 (1). pp. 89-102. ISSN 1450216X

Jumaat, M.Z.; Rahman, M.M.; Alam, M.A. (2010) Flexural strengthening of RC continuous T beam using CFRP laminate: a review. International Journal of the Physical Sciences, 5 (6). pp. 619-625. ISSN 1992-1950

Kadir, M.N.A.; Mekhilef, S.; Ping, H.W. (2010) Dual vector control strategy for a three-stage hybrid cascaded multilevel inverter. Journal of Power Electronics, 10 (2). pp. 155-164. ISSN 1598-2092

Kadir, M.N.A.; Mekhilef, S.; Ping, H.W. (2010) Voltage vector control of a hybrid three-stage 18-level inverter by vector decomposition. Iet Power Electronics, 3 (4). pp. 601-611. ISSN 1755-4535

Kadri, N.A.; Ng, K.H. (2010) BIIJ embracing social media. Biomedical Imaging and Intervention Journal, 6 (1). ISSN 18235530 (ISSN)

Kamali, B.; Hashim, R. (2010) Bamboo foundation mat for rubble mound breakwaters on mud deposits. International Journal of the Physical Sciences, 5 (9). pp. 1406-1410. ISSN 19921950

Kamali, B.; Hashim, R.; Akib, S. (2010) Efficiency of an integrated habitat stabilisation approach to coastal erosion management. International Journal of the Physical Sciences, 5 (9). pp. 1401-1405. ISSN 1992-1950

Karim, M.R.; Dehghani, A. (2010) Vehicle speed detection in video image sequences using CVS method. International Journal of the Physical Sciences, 5 (17). pp. 2555-2563. ISSN 1992-1950

Karim, M.R.; Gnanendran, C.T.; Lo, S.C.R.; Mak, J. (2010) Predicting the long-term performance of a wide embankment on soft soil using an elastic-viscoplastic model. Canadian Geotechnical Journal, 47 (2). pp. 244-257. ISSN 0008-3674

Karim, M.R.; Krabbenhoft, K. (2010) Extraction of effective cement paste diffusivities from X-ray microtomography scans. Transport in Porous Media, 84 (2). pp. 371-388. ISSN 0169-3913

Karim, M.R.; Krabbenhoft, K. (2010) New renormalization schemes for conductivity upscaling in heterogeneous media. Transport in Porous Media, 85 (3). pp. 677-690. ISSN 0169-3913

Karim, M.R.; Oka, F. (2010) An automatic time increment selection scheme for simulation of elasto-viscoplastic consolidation of clayey soils. Geomechanics and Geoengineering, 5 (3). pp. 153-177. ISSN 1748-6025

Khalil, M.; Jan, B.M.; Raman, A.A.A. (2010) Fractional factorial design optimization of nontraditional completion fluid for perforation with underbalance. Chemistry and Technology of Fuels and Oils, 46 (5). pp. 340-350. ISSN 0009-3092

Kow, S.T.; Yap, Y.; Pua, C.H.; Chong, W.Y.; Law, A.W.P.; Adikan, F.R.M.; Haseeb, A.; Ahmad, H. (2010) Selective area rare-earth doping of planar glass samples for monolithic integration of optically passive and active waveguides. Optik, 121 (8). pp. 722-725. ISSN 0030-4026

Lau, C. K.; Heng, Y. S.; Hussain, M. A.; Mohamad Nor, M. I. (2010) Fault diagnosis of the polypropylene production process (UNIPOL PP) using ANFIS. ISA Trans, 49 (4). pp. 559-566. ISSN 1879-2022

Leong, K.Y.; Saidur, R.; Kazi, S.N.; Mamun, A.H. (2010) Performance investigation of an automotive car radiator operated with nanofluid-based coolants (nanofluid as a coolant in a radiator). Applied Thermal Engineering, 30 (17-18). pp. 2685-2692. ISSN 1359-4311

Leow, R.S.; Moghavvemi, M.; Ibrahim, F. (2010) An efficient low-cost real-time brain computer interface system based on SSVEP. IEICE Electronics Express, 7 (5). pp. 326-331. ISSN 1349-2543

Lim, J.S.; Hussain, M.A.; Aroua, M.K. (2010) Control of a hydrolyzer in an oleochemical plant using neural network based controllers. Neurocomputing, 73 (16-18). pp. 3242-3255. ISSN 0925-2312

Mahdiraji, G.A.; Abdullah, M.K.; Mohammadi, A.M.; Abas, A.F.; Mokhtar, M.; Zahedi, E. (2010) Duty-cycle division multiplexing (DCDM). Optics and Laser Technology, 42 (2). pp. 289-295. ISSN 0030-3992

Mahlia, T. M. I.; Saidur, R. (2010) A review on test procedure, energy efficiency standards and energy labels for room air conditioners and refrigerator-freezers. Renewable and Sustainable Energy Reviews, 14 (7). pp. 1888-1900. ISSN 1364-0321

Mahlia, T. M. I.; Saidur, R.; Memon, L. A.; Zulkifli, N. W. M.; Masjuki, H. H. (2010) A review on fuel economy standard for motor vehicles with the implementation possibilities in Malaysia. Renewable and Sustainable Energy Reviews, 14 (9). pp. 3092-3099. ISSN 1364-0321

Mahlia, T.M.I.; Hor, C.G.; Masjuki, H.H.; Husnawan, M.; Varman, M.; Mekhilef, S. (2010) Clothes drying from room air conditioning waste heat: thermodynamics investigation. Arabian Journal for Science and Engineering, 35 (1B). pp. 339-351. ISSN 1319-8025

Mahlia, T.M.I.; Saidur, R.; Husnawan, M.; Masjuki, H.H.; Kalam, M.A. (2010) An approach to estimate the life-cycle cost of energy efficiency improvement of room air conditioners. Energy Education Science and Technology Part a-Energy Science and Research, 26 (1). pp. 1-11. ISSN 1308-772X

Mahrez, A.; Karim, M.R. (2010) Fatigue characteristics of stone mastic asphalt mix reinforced with fiber glass. International Journal of the Physical Sciences, 5 (12). pp. 1840-1847. ISSN 1992-1950

Malekmohammadi, A.; Al-Mansoori, M.H.; Mahdiraji, G.A.; Abas, A.F.; Abdullah, M.K. (2010) Performance enhancement of absolute polar duty cycle division multiplexing with dual-drive mach zehnder-modulator in 40Gbit/s optical fiber communication systems. Optics Communications, 283 (16). pp. 3145-3148. ISSN 0030-4018

Mamun, M. A. H.; Tanim, T. R.; Rahman, M. M.; Saidur, R.; Nagata, S. (2010) Mixed convection analysis in trapezoidal cavity with a moving lid. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 18-28. ISSN 1823-0334

Mamun, M.A.H.; Rahman, M.M.; Billah, M.M.; Saidur, R. (2010) A numerical study on the effect of a heated hollow cylinder on mixed convection in a ventilated cavity. International Communications in Heat and Mass Transfer, 37 (9). pp. 1326-1334. ISSN 0735-1933

Matsumoto, T.; Takahashi, T.; Iwahashi, M.; Kimura, T.; Salbiah, S.; Mokhtar, N. (2010) Reduction of data size for transmission in localization of mobile robots. International Journal of the Physical Sciences, 5 (17). pp. 2652-2657. ISSN 19921950

Mazandarani, A.; Mahlia, T.M.I.; Chong, W.T.; Moghavvemi, M. (2010) A review on the pattern of electricity generation and emission in Iran from 1967 to 2008. Renewable and Sustainable Energy Reviews, 14 (7). pp. 1814-1829. ISSN 13640321

Mekhilef, S.; Chard, T.R.; Ramachandramurthy, V.K. (2010) Voltage rise due to inter-connection of embedded generators to distribution network. Journal of Scientific & Industrial Research, 69 (6). pp. 433-438. ISSN 0022-4456

Mekhilef, S.; Kadir, M.N.A. (2010) Voltage control of three-stage hybrid multilevel inverter using vector transformation. IEEE Transactions on Power Electronics, 25 (10). pp. 2599-2606. ISSN 08858993

Mohammed, H. A.; Campo, A.; Saidur, R. (2010) Experimental study of forced and free convective heat transfer in the thermal entry region of horizontal concentric annuli. International Communications in Heat and Mass Transfer, 37 (7). pp. 739-747. ISSN 0735-1933

Mohammed Mohammed, M.; Hashim, R.; Firas Salman, A. (2010) Effective improvement depth for ground treated with rapid impact compaction. Scientific Research and Essays, 5 (18). pp. 2686-2693. ISSN 19922248

Mokhlis, H.; Bakar, A.H.A.; Talib, D.N.A.; Mohamad, H. (2010) The improvement of voltage sags pattern approach to locate a fault in distribution network. International Review of Electrical Engineering-Iree, 5 (3). pp. 1159-1164. ISSN 1827-6660

Mokhlis, H.; Li, H.Y.; Khalid, A.R. (2010) The application of voltage sags pattern to locate a faulted section in distribution network. International Review of Electrical Engineering-Iree, 5 (1). pp. 173-179. ISSN 1827-6660

Mokhlis, H.; Li, H.Y.; Mohamad, H.; Bakar, A.H.A. (2010) A comprehensive fault location estimation using voltage sag profile for non-homogenous distribution networks. International Review of Electrical Engineering-Iree, 5 (5). pp. 2310-2316. ISSN 1827-6660

Mokhtar, N.; Arof, H.; Iwahashi, M. (2010) One dimensional image processing for eye tracking using derivative dynamic time warping. Scientific Research and Essays, 5 (19). pp. 2947-2952. ISSN 1992-2248

Mustafa, Z.; Amin, I.; Nukman, Y.; Haider, N.; Haq, I. (2010) Laser cutting quality control of melamine using artificial neural networks. Asia Pacific Industrial Engineering and Management Systems Conference.

Naganathan, S.; Razak, H. A.; Hamid, S. N. A. (2010) Effect of kaolin addition on the performance of controlled low-strength material using industrial waste incineration bottom ash. Waste Management & Research, 28 (9). pp. 848-860. ISSN 0734-242X

Narmashiri, K.; Jumaat, M.Z. (2010) Numerical study on strengthening composite bridges. Challenges, Opportunities and Solutions in Structural Engineering and Construction. pp. 241-246. ISSN 978-0-415-56809-8

Narmashiri, K.; Jumaat, M.Z.; Sulong, N.H.R. (2010) Investigation on end anchoring of CFRP strengthened steel I-beams. International Journal of the Physical Sciences, 5 (9). pp. 1360-1371. ISSN 1992-1950

Narmashiri, K.; Jumaat, M.Z.; Sulong, N.H.R. (2010) Shear strengthening of steel I-beams by using CFRP strips. Scientific Research and Essays, 5 (16). pp. 2155-2168. ISSN 1992-2248

Nukman, Y.; Abu Osman, N.A.; Khairi, S.O.; Harizam, M.Z. (2010) A study on laser cutting of textiles. International Congress on Applications of Lasers & Electro Optics.

Owlad, M.; Aroua, M.K.; Wan Daud, W.M. (2010) Hexavalent chromium adsorption on impregnated palm shell activated carbon with polyethyleneimine. Bioresource Technology, 101 (14). pp. 5098-5103. ISSN 1873-2976

Pan, W. F.; Razak, H. A. (2010) Concrete performance using locally produced kaolin. Proceedings of Institution of Civil Engineers: Construction Materials, 163 (4). pp. 201-209. ISSN 1747-6518

Rahman, M.M.; Billah, M.M.; Mamun, M.A.H.; Saidur, R.; Hasanuzzaman, M. (2010) Reynolds and prandtl numbers effects on mhd mixed convection in a lid-driven cavity along with joule heating and a centered heat conducting circular block. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 163-170. ISSN 1823-0334

Raval, R. R.; Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2010) Work together… when apart challenges and what is need for effective virtual teams. Journal of Information, Knowledge and Research in Business Management and Administration, 1 (1). pp. 1-3. ISSN 0975 – 671X

Razak, H. A.; Naganathan, S.; Hamid, S. N. A. (2010) Controlled Low-Strength Material Using Industrial Waste Incineration Bottom Ash and Refined Kaolin. Arabian Journal for Science and Engineering, 35 (2B). pp. 53-67. ISSN 1319-8025

Rusly, S.M.; Ibrahim, S. (2010) Adsorption of textile reactive dye by palm shell activated carbon: response surface methodology. World Academy of Science, Engineering and Technology, 43. pp. 892-895. ISSN 2010376X (ISSN)

Safiuddin, M.; Jumaat, M.Z.; Salam, M.A.; Islam, M.S.; Hashim, R. (2010) Utilization of solid wastes in construction materials. International Journal of Physical Sciences, 5 (13). pp. 1952-1963. ISSN 1992-1950

Safiuddin, M.; Jumaat, M.Z.; Salam, M.A.; Islam, M.S.; Hashim, R. (2010) Utilization of solid wastes in construction materials. International Journal of Physical Sciences, 5 (13). pp. 1952-1963. ISSN 19921950

Saidur, R. (2010) Energy, economics and environmental analysis for chillers in office buildings. Energy Education Science and Technology Part a-Energy Science and Research, 25 (1-2). pp. 1-16. ISSN 1308-772X

Saidur, R. (2010) A review on electrical motors energy use and energy savings. Renewable and Sustainable Energy Reviews, 14 (3). pp. 877-898. ISSN 1364-0321

Saidur, R. (2010) A review on electrical motors energy use and energy savings. Renewable and Sustainable Energy Reviews, 14 (3). pp. 877-898. ISSN 1364-0321

Saidur, R.; Abdelaziz, E.A.; Hasanuzzaman, M.; Mamun, M.A.H. (2010) A study of energy efficiency, economic and environmental benefits of a cooling tower. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 87-94. ISSN 18230334

Saidur, R.; Ahamed, J.U.; Masjuki, H.H. (2010) Energy, exergy and economic analysis of industrial boilers. Energy Policy, 38 (5). pp. 2188-2197. ISSN 0301-4215

Saidur, R.; Hasanuzzaman, M.; Rahim, NA (2010) Energy use, energy savings and environmental analysis of industrial boilers and compressors. International Journal of Thermal & Environmental Engineering, 1 (1). pp. 29-36. ISSN 19237308

Saidur, R.; Hasanuzzaman, M.; Yogeswaran, S.; Mohammed, H.A.; Hossain, M.S. (2010) An end-use energy analysis in a Malaysian public hospital. Energy, 35 (12). pp. 4780-4785. ISSN 0360-5442

Saidur, R.; Islam, M. R.; Rahim, N. A.; Solangi, K. H. (2010) A review on global wind energy policy. Renewable and Sustainable Energy Reviews, 14 (7). pp. 1744-1762. ISSN 1364-0321

Saidur, R.; Lai, Y. K. (2010) Parasitic energy savings in engines using nanolubricants. Energy Education Science and Technology Part a-Energy Science and Research, 26 (1). pp. 61-74. ISSN 1308-772X

Saidur, R.; Mahlia, T. M. I. (2010) Energy, economic and environmental benefits of using high-efficiency motors to replace standard motors for the Malaysian industries. Energy Policy, 38 (8). pp. 4617-4625. ISSN 0301-4215

Saidur, R.; Mekhilef, S. (2010) Energy use, energy savings and emission analysis in the Malaysian rubber producing industries. Applied Energy, 87 (8). pp. 2746-2758. ISSN 03062619

Saidur, R.; Rahim, N. A.; Hasanuzzaman, M. (2010) A review on compressed-air energy use and energy savings. Renewable and Sustainable Energy Reviews, 14 (4). pp. 1135-1153. ISSN 1364-0321

Sajedi, F.; Abdul Razak, H. (2010) Relationship between 7 and 28 days CSS1 for HSC2 by use of ANN3 and regression methods. Asian Journal of Civil Engineering, 11 (2). pp. 207-218. ISSN 15630854

Sajedi, F.; Abdul Razak, H. (2010) Thermal activation of ordinary Portland cement-slag mortars. Materials & Design, 31 (9). pp. 4522-4527. ISSN 0261-3069

Sajedi, F.; Razak, H.A. (2010) The effect of chemical activators on early strength of ordinary Portland cement-slag mortars. Construction and Building Materials, 24 (10). pp. 1944-1951. ISSN 0950-0618

Salih, A.L.; Moghavvemi, M.; Mohamed, H.A.F.; Gaeid, K.S. (2010) Flight PID controller design for a UAV quadrotor. Scientific Research and Essays, 5 (23). pp. 3660-3667. ISSN 19922248

Salman, F.A.; Fattah, M.Y.; Mohammed, M.M.; Hashim, R. (2010) Numerical investigation on reinforcement requirement for piles embedded in clay. Scientific Research and Essays, 5 (18). pp. 2731-2741. ISSN 19922248

Sarmani, A.R.; Sheih, S.J.; Adikan, F.R.M.; Mahdi, M.A. (2010) Spectral gain characteristics induced by 980 nm pumping band in a gain-Flattened EDFA. Laser Physics, 20 (9). pp. 1824-1828. ISSN 1054-660X

Shafeeyan, M.S.; Daud, W.M.A.W.; Houshmand, A.; Shamiri, A. (2010) A review on surface modification of activated carbon for carbon dioxide adsorption. Journal of Analytical and Applied Pyrolysis, 89. pp. 143-151.

Shafigh, P.; Jumaat, M.Z.; Mahmud, H. (2010) Mix design and mechanical properties of oil palm shell lightweight aggregate concrete: a review. International Journal of the Physical Sciences, 5 (14). pp. 2127-2134. ISSN 1992-1950

Shahidul Islam, M.; Hashim, R. (2010) Stabilization of peat soil by soil-column technique and settlement of the group columns. International Journal of Physical Sciences, 5 (9). pp. 1411-1418. ISSN 19921950

Shahla, S.; Cheng, N.G.; Yusoff, R. (2010) An overview on transesterification of natural oils and fats. Biotechnology and Bioprocess Engineering, 15 (6). pp. 891-904. ISSN 1226-8372

Shamiri, A.; Hussain, M.A.; Mjalli, F.S.; Mostoufi, N. (2010) Kinetic modeling of propylene homopolymerization in a gas-phase fluidized-bed reactor. Chemical Engineering Journal, 161 (1-2). pp. 240-249. ISSN 1385-8947

Sisamouth, L; Hamdi, M; Ariga, T (2010) Investigation of gap filling ability of Ag-Cu-In brazing filler metals. Journal of alloys and compounds, 504 (2). pp. 325-329. ISSN 0925-8388

Sua, Y.M.; Chong, W.Y.; Tan, C.C.; Ahmad, H.; Adikan, F.R.M. (2010) Effect of using aqueous/alcohol solution during solution doping on the physical and chemical characteristics of pre-sintered silica soot and the resultant native glass species concentration. Materials Chemistry and Physics, 124 (2-3). pp. 1077-1082. ISSN 0254-0584

Ustun, T.S.; Mekhilef, S. (2010) Design and implementation of static synchronous series compensator with a soft-switching H-bridge inverter with DSP-based synchronization control. International Review of Electrical Engineering-Iree, 5 (4). pp. 1347-1353. ISSN 1827-6660

Ustun, T.S.; Mekhilef, S. (2010) Effects of a static synchronous series compensator (SSSC) based on a soft switching 48-pulse PWM inverter on the power demand from the grid. Journal of Power Electronics, 10 (1). pp. 85-90. ISSN 15982092

Whaad, A.M.; Adam, N.M.; Sapuan, S.M.; Saidur, R. (2010) Effect of selected shading devices on office room temperature. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 236-243. ISSN 18230334

Yin, C.Y.; Aroua, M.K.; Daud, W.M.A.W. (2010) Metal-polyethyleneimine-activated carbon interaction parameter at equilibrium adsorption capacity. Journal of Applied Sciences, 10 (12). pp. 1192-1195. ISSN 1812-5654

Yusoff, N.M.; Abu Bakar, M.H.; Sheih, S.J.; Adikan, F.R.M.; Mahdi, M.A. (2010) Gain-flattened erbium-doped fiber amplifier with flexible selective band for optical networks. Laser Physics, 20 (8). pp. 1747-1751. ISSN 1054-660X

Zabeti, M.; Daud, W.M.A.W.; Aroua, M.K. (2010) Biodiesel production using alumina-supported calcium oxide: An optimization study. Fuel Processing Technology, 91 (2). pp. 243-248. ISSN 0378-3820

Book

Yong, T.C.; Singh, R.; Liang, A.K.; Hong, Y.W. (2010) Sintering behavior of hydroxyapatite ceramics prepared by different routes. Ceramic Engineering and Science Proceedings, 30 . Engineering, pp. 127-137.

Conference or Workshop Item

Abdelaziz, Mahrez; Mohamed Rehan , Karim (2010) Rheological evaluation of bituminous binder modified with waste plastic material. In: 5th International Symposium on Hydrocarbons & Chemistry (ISHC5), Sidi Fredj, Algiers, 23 - 25 May 2010. (Unpublished)

Abdolrasol, M.G.M.; Mekhilef, S. (2010) Robust hybrid anti-islanding method for inverter-based distributed generation. In: 2010 IEEE Region 10 Conference, TENCON 2010, Fukuoka.

Abdolrasol, M.G.M.; Mekhilef, S. (2010) Three phase grid connected anti-islanding controller based on distributed generation interconnection. In: 2010 IEEE International Conference on Power and Energy, PECon2010, Kuala Lumpur.

Ahmed, R.A.; Mekhilef, S.; Ping, H.W. (2010) New multilevel inverter topology with minimum number of switches. In: 2010 IEEE Region 10 Conference, TENCON 2010, Fukuoka.

Akib, S.; Fayyadh, M.M.; Razak, H.A. (2010) Review of bridge vibration and future direction. In: 17th International Congress on Sound and Vibration 2010, ICSV 2010, 2010.

Ale Ebrahim, N.; Ahmed, S.; Abdul Rashid, S.H.; Taha, Zahari (2010) Virtual R&D teams: a potential growth of education-industry collaboration. In: 2nd International Congress on Engineering Education (ICEED 2010), 8th - 9th December, Sunway Resort Hotel & Spa, Kuala Lumpur, Malaysia.

Ale Ebrahim, N.; Ahmed, S.; Abdul Rashid, S.H.; Taha , Z. (2010) Virtual teams: a new opportunity to develop a business. In: International Conference on Entrepreneurship Across Boundaries, 5 - 6 AUGUST, Section For Co-curricular Courses, External Faculty Electives and TITAS, University of Malaya, Kuala Lumpur, Malaysia.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2010) Benefits and pitfalls of virtual R&D teams: an empirical study. In: 6th International Communication & Information Technology Management Conference (ICTM 2010) , February. 23-24, Tehran, Iran.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2010) Envisages of new product developments in small and medium enterprises through virtual team. In: International Conference on Industrial Engineering and Operations Management (IEOM2010) , January 9-10, Dhaka, Bangladesh.

Alengaram, U.J.; Mahmud, H.; Jumaat, M.Z. (2010) Development of lightweight concrete using industrial waste material, palm kernel shell as lightweight aggregate and its properties. In: Chemical, Biological and Environmental Engineering (ICBEE), 2010 2nd International Conference on.

Almurib, H.A.F.; Askari, M.; Moghavvemi, M. (2010) Hard constraints explicit model predictive control of an inverted pendulum. In: 2010 1st International Conference on Energy, Power and Control, EPC-IQ01 2010, 30 November - 2 December 2010, Basrah,Iraq.

Bakar, A.H.A.; Mokhlis, H.; Ling, L.A.; Ping, H.W. (2010) Lightning over voltage performance of 132kV GIS substation in Malaysia. In: Power System Technology (POWERCON), 2010 International Conference on, 2010.

Choudhury, I.A.; Lee, C.Y.; Bhuiyan, M.S.H.; Nukman, Y. (2010) CETE91 tool condition monitoring using ae signal in turning of ASSAB-705 steel. In: World Engineering Congress 2010,Conference on Manufacturing Technology and Management, 2-5 August 2010, Kuching,Sarawak. (Unpublished)

Fayyadh, M.M.; Razak, H.A. (2010) The effect of support condition on dynamic parameters. In: 17th International Congress on Sound and Vibration 2010, ICSV 2010, 2010, Cairo.

Hasanuzzaman, M.; Rahim, N.A.; Saidur, R. (2010) Analysis of energy savings for rewinding and replacement of industrial motor. In: 2010 IEEE International Conference on Power and Energy, PECon2010, 2010, Kuala Lumpur.

Hasikin, K.; Soin, N.; Ibrahim, F. (2010) Micro-diaphragm performance analysis for polyimide diaphragm. In: 2010 IEEE International Conference on Semiconductor Electronics, ICSE 2010, 2010, Melaka .

Husain, N.M.; Mahmud, H.B.; Karim, M.R.; Hamid, N.B.A.A. (2010) Effects of aggregate gradations on properties of grouted Macadam composite pavement. In: 2nd International Conference on Chemical, Biological and Environmental Engineering, ICBEE 2010, 2010, Cairo.

Ibrahim, F.; Jahanshahi, P.; Abd Rahman, N.; Abdul Kahar, M.K.B.; Madou, M.; Nozari, A.A.; Soin, N.; Md Dawal, S.Z.; Abi Samra, K. (2010) Analysis and experiment of centrifugal force for microfluidic ELISA CD platform. In: 2010 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2010, 2010, Kuala Lumpur.

Igroufa, Samira; Hashim, Roslan; Taib, Samsudin (2010) Mapping of salt-water intrusion by geoelectrical imaging in Carey Islands. In: 5th International Symposium on Hydrocarbons & Chemistry (ISHC5), Sidi Fredj, Algiers, 23 - 25 May 2010. (Unpublished)

Ismail, N.A.; Kasim, L.M.; Mokhtar, N.F.; Yaakub, T.S.T.; Mokhlis, H. (2010) Digital analysis and development of ride-through capability of ac contactor with respect to voltage sag characteristics. In: Computer and Automation Engineering (ICCAE), 2010 The 2nd International Conference on, 2010.

Jahanshahi, P.; Md Dawal, S.Z.; Ibrahim, F.; Nozari, A.A.; Soin, N. (2010) Development of a low-cost and portable device controller for point-of-care medical diagnostics. In: 2010 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2010, 2010, Kuala Lumpur.

Kasman, M.; Ibrahim, S. (2010) Application of response surface methodology in optimization of cadmium adsorption by raw rice husk. In: 2010 International Conference on Environmental and Agriculture Engineering, ICEAE 2010, 2010, Kyoto.

Malekmohammadi, A.; Abdullah, M.K.; Abas, A.F.; Mahdiraji, G.A. (2010) Effect of guard band on the performance of AP-DCDM technique in 40 Gb/s optical fiber communication system. In: Photonics (ICP), 2010 International Conference on, 2010.

Md Dawal, S.Z. (2010) CMTM10 investigation on upper limb and lower back muscles activities during sedentary work. In: World Engineering Congress 2010,Conference on Manufacturing Technology and Management, 2-5 August 2010, Kuching,Sarawak. (Unpublished)

Mekhilef, S. (2010) Renewable energy resources and technology practices in Malaysia. In: 5th International Symposium on Hydrocarbons & Chemistry (ISHC5), Sidi Fredj, Algiers, 23 - 25 May 2010. (Unpublished)

Mohamad, H.; Bakar, A.H.A.; Ping, H.W.; Mokhlis, H. (2010) An adaptive controller of hydro generators for smart grid application in Malaysia. In: Power System Technology (POWERCON), 2010 International Conference on, 2010.

Mokhlis, H.; Li, H.Y.; Bakar, A.H.A.; Mohamad, H. (2010) Locating fault using voltage sags profile for underground distribution system. In: Power System Technology (POWERCON), 2010 International Conference on, 2010.

Sahari, B.B.; Shahzamanian, M.M.; Bayat, M. (2010) CAME 56 - Comparsion of thermoelastic results in two types of functionally graded brake disks. In: World Engineering Congress 2010, Malaysia Conference on Aerospace and Mechanical Engineering , August 2-5, 2010, Kuching,Sarawak, Malaysia. (Unpublished)

Salih, A.L.; Moghavvemi, M.; Mohamed, H.A.F.; Gaeid , K.S. (2010) Modelling and PID controller design for a quadrotor unmanned air vehicle. In: 17th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2010 , 28 - 30 May 2010, Cluj-Napoca, Romania..

Shahriari, A.; Bakar, A.H.A.; Mokhlis, H. (2010) Comparative studies on Non-Divergent Load flow methods in well, ill and unsolvable condition. In: Power System Technology (POWERCON), 2010 International Conference on, 2010.

Veny, H.; Aroua, M.K.; Sulaiman, N.M.N. (2010) Solvent free enzymatic transesterification of crude jatropha oil in packed bed reactor. In: 2nd International Conference on Chemical, Biological and Environmental Engineering, ICBEE 2010, 2010, Cairo.

Yazid, H.; Arof, H.; Mokhtar, N. (2010) Edge sharpening for diabetic retinopathy detection. In: 2010 IEEE International Conference on Cybernetics and Intelligent Systems, CIS 2010, 2010, Singapore.

Younis, M.A.A.; Rahim, N.A.; Mekhilef, S. (2010) High efficiency THIPWM three-phase inverter for grid connected system. In: 2010 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2010, Penang.

Zainudin, H.N.; Mekhilef, S. (2010) Comparison study of maximum power point tracker techniques for PV systems. In: Proceedings of the 14th International Middle East Power Systems Conference (MEPCON�10), Cairo University, Egypt, Cairo University, Egypt,.

Zehra, E.J.A.; Moghavvemi, M.; Hashim, M.M.I.; Kashem, M. (2010) Network reconfiguration using PSAT for loss reduction in distribution systems. In: 2010 1st International Conference on Energy, Power and Control, EPC-IQ01 2010, 30 November 2010 - 2 December 2010, Basrah, Iraq.

This list was generated on Wed Aug 20 22:38:14 2014 MYT.