Number of items: 64.
Abdelaziz, Mahrez; Mohamed Rehan , Karim (2010) Rheological evaluation of bituminous binder modified with waste plastic material. In: 5th International Symposium on Hydrocarbons & Chemistry (ISHC5), Sidi Fredj, Algiers, 23 - 25 May 2010. (Unpublished)
Abdolrasol, M.G.M.; Mekhilef, S. (2010) Robust hybrid anti-islanding method for inverter-based distributed generation. In: 2010 IEEE Region 10 Conference, TENCON 2010, Fukuoka.
Abdolrasol, M.G.M.; Mekhilef, S. (2010) Three phase grid connected anti-islanding controller based on distributed generation interconnection. In: 2010 IEEE International Conference on Power and Energy, PECon2010, Kuala Lumpur.
Abioye, O.P.; Agamuthu, P.; Abdul Aziz, A. (2010) Phytoaccumulation of zinc and iron by jatropha curcas grown in used lubricating oil-contaminated soil. Malaysian Journal of Science, 29 (3). pp. 207-213. ISSN 13943065 (ISSN)
Abioye, P.O.; Aziz, A.A.; Agamuthu, P. (2010) Enhanced biodegradation of used engine oil in soil amended with organic wastes. Water Air and Soil Pollution, 209 (1-4). pp. 173-179. ISSN 0049-6979
Abu Osman, N.A.; Spence, W.D.; Solomonidis, S.E.; Paul, J.P.; Weir, A.M. (2010) Transducers for the determination of the pressure and shear stress distribution at the stump-socket interface of trans-tibial amputees. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 224 (8). pp. 1239-1250. ISSN 2041-2975
Abu Osman, N.A.; Spence, W.D.; Solomonidis, S.E.; Paul, J.P.; Weir, A.M. (2010) The patellar tendon bar! Is it a necessary feature? Medical Engineering & Physics, 32 (7). pp. 760-765. ISSN 1350-4533
Agamuthu, P.; Abioye, O.P.; Aziz, A.A. (2010) Phytoremediation of soil contaminated with used lubricating oil using Jatropha curcas. Journal of Hazardous Materials, 179 (1-3). pp. 891-894. ISSN 0360-3199
Ahmed, R.A.; Mekhilef, S.; Ping, H.W. (2010) New multilevel inverter topology with minimum number of switches. In: 2010 IEEE Region 10 Conference, TENCON 2010, Fukuoka.
Al-Alimi, A.W.; Al-Mansoori, M.H.; Abas, A.F.; Mahdi, M.A.; Ajiya, M.; Adikan, F.R.M. (2010) Efficient technique for intracavity loss optimization in a dual-wavelength erbium-doped fiber laser. Laser Physics, 20 (11). pp. 2001-2005. ISSN 1054-660X
Ale Ebrahim, N.; Ahmed, S.; Abdul Rashid, S.H.; Taha, Zahari (2010) Virtual R&D teams: a potential growth of education-industry collaboration. In: 2nd International Congress on Engineering Education (ICEED 2010), 8th - 9th December, Sunway Resort Hotel & Spa, Kuala Lumpur, Malaysia.
Ale Ebrahim, N.; Ahmed, S.; Abdul Rashid, S.H.; Taha , Z. (2010) Virtual teams: a new opportunity to develop a business. In: International Conference on Entrepreneurship Across Boundaries, 5 - 6 AUGUST, Section For Co-curricular Courses, External Faculty Electives and TITAS, University of Malaya, Kuala Lumpur, Malaysia.
Ale Ebrahim, N.; Ahmed, S.; Taha, Z. (2010) Critical factors for new product developments in SMEs virtual team. African Journal of Business Management, 4 (11). pp. 2247-2257. ISSN 1993-8233
Ale Ebrahim, N.; Ahmed, S.; Taha, Z. (2010) Virtual R&D teams and SMEs growth: A comparative study between Iranian and Malaysian SMEs. African Journal of Business Management, 4 (11). pp. 2368-2379. ISSN 1993-8233
Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2010) Benefits and pitfalls of virtual R&D teams: an empirical study. In: 6th International Communication & Information Technology Management Conference (ICTM 2010) , February. 23-24, Tehran, Iran.
Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2010) Envisages of new product developments in small and medium enterprises through virtual team. In: International Conference on Industrial Engineering and Operations Management (IEOM2010) , January 9-10, Dhaka, Bangladesh.
Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2010) SMEs, virtual research and development (R&D) teams and new product development: a literature review. International Journal of the Physical Sciences, 5 (7). pp. 916-930. ISSN 1992-1950
Alengaram, U.J.; Mahmud, H.; Jumaat, M.Z. (2010) Comparison of mechanical and bond properties of oil palm kernel shell concrete with normal weight concrete. International Journal of the Physical Sciences, 5 (8). pp. 1231-1239. ISSN 1992-1950
Alengaram, U.J.; Mahmud, H.; Jumaat, M.Z. (2010) Development of lightweight concrete using industrial waste material, palm kernel shell as lightweight aggregate and its properties. In: Chemical, Biological and Environmental Engineering (ICBEE), 2010 2nd International Conference on.
Alengaram, U.J.; Mahmud, H.; Jumaat, M.Z.; Shirazi, S.M. (2010) Effect of aggregate size and proportion on strength properties of palm kernel shell concrete. International Journal of the Physical Sciences, 5 (12). pp. 1848-1856. ISSN 1992-1950
Amiri-Khorasani, M.; Osman, N.A.A.; Yusof, A. (2010) Electromyography assessments of the vastus medialis muscle during soccer instep kicking between dynamic and static stretching. Journal of Human Kinetics, 24. pp. 35-41. ISSN 1640-5544
Atadashi, I.M.; Aroua, M.K.; Aziz, A.A. (2010) High quality biodiesel and its diesel engine application: a review. Renewable & Sustainable Energy Reviews, 14 (7). pp. 1999-2008.
Baroutian, S.; Aroua, M.K.; Raman, A.A.A.; Sulaiman, N.M.N. (2010) Methanol recovery during transesterification of palm oil in a TiO2/Al2O3 membrane reactor: experimental study and neural network modeling. Separation and Purification Technology, 76 (1). pp. 58-63.
Baroutian, S.; Aroua, M.K.; Raman, A.A.A.; Sulaiman, N.M.N. (2010) Viscosities and densities of binary and ternary blends of palm oil plus palm biodiesel plus diesel fuel at different temperatures. Journal of Chemical and Engineering Data, 55 (1). pp. 504-507.
Chitsazan, I.; Kobraei, M.; Jumaat, M.Z.; Shafigh., P. (2010) An experimental study on the flexural behaviour of FRP RC bemas and comparison of the ultimate moment capacity with ACI. Journal of Civil Engineering and Construction Technology, 1 (2). pp. 27-42. ISSN 2141-2634
Dhakshyani, R.; Nukman, Y.; Abu Osman, N.A.; Merican, A.M.; George, J. (2010) Rapid prototyping medical models for dysplastic hip orthopaedic surgery. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 224 (B5). pp. 769-776. ISSN 0954-4054
Dhananjaya, H.R.; Nagabhushanam, J.; Pandey, P.C.; Jumaat, M.Z. (2010) New twelve node serendipity quadrilateral plate bending element based on mindlin-reissner theory using integrated force method. Structural Engineering and Mechanics, 36 (5). pp. 625-642. ISSN 1225-4568
Fazal, M.A.; Haseeb, A.S.M.A.; Masjuki, H.H. (2010) Comparative corrosive characteristics of petroleum diesel and palm biodiesel for automotive materials. Fuel Processing Technology, 91 (10). pp. 1308-1315.
Hasan, M. M.; Haseeb, A.S.M.A.; Masjuki, H. H.; Saidur, R.; Hamdi, M. (2010) Influence of substrate temperatures on structural, morphological and optical properties of rf-sputtered anatase TiO2 films. Arabian Journal for Science and Engineering, 35 (1C). pp. 147-156. ISSN 1319-8025
Hasan, M.M.; Haseeb, A.S.M.A.; Saidur, R.; Masjuki, H.H.; Hamdi, M. (2010) Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO2 thin films. Optical Materials, 32 (6). pp. 690-695. ISSN 0925-3467
Haseeb, A.S.M.A.; Hasan, M.M.; Masjuki, H.H. (2010) Structural and mechanical properties of nanostructured TiO2 thin films deposited by RF sputtering. Surface & Coatings Technology, 205 (2). pp. 338-344. ISSN 0257-8972
Haseeb, A.S.M.A.; Masjuki, H.H.; Ann, L.J.; Fazal, M.A. (2010) Corrosion characteristics of copper and leaded bronze in palm biodiesel. Fuel Processing Technology, 91 (3). pp. 329-334. ISSN 0378-3820
Haseeb, A.S.M.A.; Masjuki, H.H.; Siang, C.T.; Fazal, M.A. (2010) Compatibility of elastomers in palm biodiesel. Renewable Energy, 35 (10). pp. 2356-2361. ISSN 0960-1481
Haseeb, A.S.M.A.; Sia, S.Y.; Fazal, M.A.; Masjuki, H.H. (2010) Effect of temperature on tribological properties of palm biodiesel. Energy, 35 (3). pp. 1460-1464. ISSN 0360-5442
Igroufa, Samira; Hashim, Roslan; Taib, Samsudin (2010) Mapping of salt-water intrusion by geoelectrical imaging in Carey Islands. In: 5th International Symposium on Hydrocarbons & Chemistry (ISHC5), Sidi Fredj, Algiers, 23 - 25 May 2010. (Unpublished)
Islam, A.B.M.S.; Ahmad, S.I.; Jameel, M.; Jumaat, M.Z. (2010) Seismic base isolation for buildings in regions of low to moderate seismicity: practical alternative design. Practice Periodical on Structural Design and Construction, 17 (1). pp. 13-20. ISSN 1084-0680
Jumaat, M.Z.; Alam, M.D.A. (2010) Experimental and numerical analysis of end anchored steel plate and CFRP laminate flexurally strengthened reinforced concrete (rc) beams. International Journal of the Physical Sciences, 5 (2). pp. 132-144. ISSN 1992 - 1950
Jumaat, M.Z.; Kabir, M.H.; Obaydullah, M. (2010) Structural performance of reinforced concrete beams repairing from spalling. European Journal of Scientific Research, 45 (1). pp. 89-102. ISSN 1450216X
Jumaat, M.Z.; Rahman, M.M.; Alam, M.A. (2010) Flexural strengthening of RC continuous T beam using CFRP laminate: a review. International Journal of the Physical Sciences, 5 (6). pp. 619-625. ISSN 1992-1950
Kadir, M.N.A.; Mekhilef, S.; Ping, H.W. (2010) Dual vector control strategy for a three-stage hybrid cascaded multilevel inverter. Journal of Power Electronics, 10 (2). pp. 155-164. ISSN 1598-2092
Kadir, M.N.A.; Mekhilef, S.; Ping, H.W. (2010) Voltage vector control of a hybrid three-stage 18-level inverter by vector decomposition. Iet Power Electronics, 3 (4). pp. 601-611. ISSN 1755-4535
Kadri, N.A.; Ng, K.H. (2010) BIIJ embracing social media. Biomedical Imaging and Intervention Journal, 6 (1). ISSN 18235530 (ISSN)
Khalil, M.; Jan, B.M.; Raman, A.A.A. (2010) Fractional factorial design optimization of nontraditional completion fluid for perforation with underbalance. Chemistry and Technology of Fuels and Oils, 46 (5). pp. 340-350. ISSN 0009-3092
Kow, S.T.; Yap, Y.; Pua, C.H.; Chong, W.Y.; Law, A.W.P.; Adikan, F.R.M.; Haseeb, A.; Ahmad, H. (2010) Selective area rare-earth doping of planar glass samples for monolithic integration of optically passive and active waveguides. Optik, 121 (8). pp. 722-725. ISSN 0030-4026
Mahlia, T.M.I.; Hor, C.G.; Masjuki, H.H.; Husnawan, M.; Varman, M.; Mekhilef, S. (2010) Clothes drying from room air conditioning waste heat: thermodynamics investigation. Arabian Journal for Science and Engineering, 35 (1B). pp. 339-351. ISSN 1319-8025
Md Dawal, S.Z. (2010) CMTM10 investigation on upper limb and lower back muscles activities during sedentary work. In: World Engineering Congress 2010,Conference on Manufacturing Technology and Management, 2-5 August 2010, Kuching,Sarawak. (Unpublished)
Mekhilef, S. (2010) Renewable energy resources and technology practices in Malaysia. In: 5th International Symposium on Hydrocarbons & Chemistry (ISHC5), Sidi Fredj, Algiers, 23 - 25 May 2010. (Unpublished)
Mekhilef, S.; Chard, T.R.; Ramachandramurthy, V.K. (2010) Voltage rise due to inter-connection of embedded generators to distribution network. Journal of Scientific & Industrial Research, 69 (6). pp. 433-438. ISSN 0022-4456
Mekhilef, S.; Kadir, M.N.A. (2010) Voltage control of three-stage hybrid multilevel inverter using vector transformation. IEEE Transactions on Power Electronics, 25 (10). pp. 2599-2606. ISSN 08858993
Narmashiri, K.; Jumaat, M.Z. (2010) Numerical study on strengthening composite bridges. Challenges, Opportunities and Solutions in Structural Engineering and Construction. pp. 241-246. ISSN 978-0-415-56809-8
Narmashiri, K.; Jumaat, M.Z.; Sulong, N.H.R. (2010) Investigation on end anchoring of CFRP strengthened steel I-beams. International Journal of the Physical Sciences, 5 (9). pp. 1360-1371. ISSN 1992-1950
Narmashiri, K.; Jumaat, M.Z.; Sulong, N.H.R. (2010) Shear strengthening of steel I-beams by using CFRP strips. Scientific Research and Essays, 5 (16). pp. 2155-2168. ISSN 1992-2248
Raval, R. R.; Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2010) Work together… when apart challenges and what is need for effective virtual teams. Journal of Information, Knowledge and Research in Business Management and Administration, 1 (1). pp. 1-3. ISSN 0975 – 671X
Safiuddin, M.; Jumaat, M.Z.; Salam, M.A.; Islam, M.S.; Hashim, R. (2010) Utilization of solid wastes in construction materials. International Journal of Physical Sciences, 5 (13). pp. 1952-1963. ISSN 1992-1950
Saidur, R.; Mekhilef, S. (2010) Energy use, energy savings and emission analysis in the Malaysian rubber producing industries. Applied Energy, 87 (8). pp. 2746-2758. ISSN 03062619
Sarmani, A.R.; Sheih, S.J.; Adikan, F.R.M.; Mahdi, M.A. (2010) Spectral gain characteristics induced by 980 nm pumping band in a gain-Flattened EDFA. Laser Physics, 20 (9). pp. 1824-1828. ISSN 1054-660X
Shafigh, P.; Jumaat, M.Z.; Mahmud, H. (2010) Mix design and mechanical properties of oil palm shell lightweight aggregate concrete: a review. International Journal of the Physical Sciences, 5 (14). pp. 2127-2134. ISSN 1992-1950
Shahla, S.; Cheng, N.G.; Yusoff, R. (2010) An overview on transesterification of natural oils and fats. Biotechnology and Bioprocess Engineering, 15 (6). pp. 891-904. ISSN 1226-8372
Sua, Y.M.; Chong, W.Y.; Tan, C.C.; Ahmad, H.; Adikan, F.R.M. (2010) Effect of using aqueous/alcohol solution during solution doping on the physical and chemical characteristics of pre-sintered silica soot and the resultant native glass species concentration. Materials Chemistry and Physics, 124 (2-3). pp. 1077-1082. ISSN 0254-0584
Ustun, T.S.; Mekhilef, S. (2010) Design and implementation of static synchronous series compensator with a soft-switching H-bridge inverter with DSP-based synchronization control. International Review of Electrical Engineering-Iree, 5 (4). pp. 1347-1353. ISSN 1827-6660
Ustun, T.S.; Mekhilef, S. (2010) Effects of a static synchronous series compensator (SSSC) based on a soft switching 48-pulse PWM inverter on the power demand from the grid. Journal of Power Electronics, 10 (1). pp. 85-90. ISSN 15982092
Younis, M.A.A.; Rahim, N.A.; Mekhilef, S. (2010) High efficiency THIPWM three-phase inverter for grid connected system. In: 2010 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2010, Penang.
Yusoff, N.M.; Abu Bakar, M.H.; Sheih, S.J.; Adikan, F.R.M.; Mahdi, M.A. (2010) Gain-flattened erbium-doped fiber amplifier with flexible selective band for optical networks. Laser Physics, 20 (8). pp. 1747-1751. ISSN 1054-660X
Zainudin, H.N.; Mekhilef, S. (2010) Comparison study of maximum power point tracker techniques for PV systems. In: Proceedings of the 14th International Middle East Power Systems Conference (MEPCON�10), Cairo University, Egypt, Cairo University, Egypt,.
This list was generated on Wed May 22 03:21:52 2013 MYT.
