Items where Division is "Faculty of Engineering" and Year is 2008

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | D | F | G | H | I | J | K | M | N | O | R | S | T | U | W | Y
Number of items: 130.

A

Abd Rahman, H. S.; Abu Osman, N. A.; Wan Abas, W. A. B.; Tunku Ahmad, T. S.; Ng, E. S. (2008) Validation of finite element analysis for a new external finger fixator to correct flexion deformity - a preliminary result. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Abdesselam, H.; Masjuki, H.H.; Saidur, R.; Sattar, M.A.; Guellal., M. (2008) Performance study of water-to-water heat pump using non-azeotropic refrigerant mixtures R407C. International Energy Journal, 9 (4).

Abdul Kadir, M.N.; Mekhilef, S.; Ping, H.W. (2008) Direct torque control permanent magnet synchronous motor drive with asymmetrical multilevel inverter supply. In: 7th Internatonal Conference on Power Electronics, ICPE'07, Daegu.

Abdul Rahim, H.; Ibrahim, F.; Taib, M.N.; Abdul Rahim, R.; Mad Sam, Y. (2008) Monitoring haemoglobin status in dengue patients using ARMAX model. In: International Symposium on Information Technology 2008, ITSim, 2008, Kuala Lumpur.

Abdul Wahab, A.K.; Hussain, M.A.; Omar, R. (2008) An artificial intelligence software-based controller for temperature control of a partially simulated chemical reactor system. Chemical Product and Process Modeling, 3 (1). ISSN 19342659

Abdullah, M.K.; Mahdiraji, G.A.; Abas, A.F.; Mokhtar, M. (2008) Absolute polar duty cycle division multiplexing: an economical and spectral efficient multiplexing technique. In: Wireless and Optical Communications Networks, 2008. WOCN'08. 5th IFIP International Conference on, 2008.

Abdullah, M.K.; Mahdiraji, G.A.; Mohammadi, A.M.; Mokhtar, M.; Abas, A.F. (2008) Duty Cycle Division Multiplexing (DCDM); a new electrical multiplexing technique for high speed optical communication systems. In: Telecommunication Technologies 2008 and 2008 2nd Malaysia Conference on Photonics. NCTT-MCP 2008. 6th National Conference on, 2008.

Adikan, F.R.M.; Gates, J.C.; Gawith, C.B.E.; Smith, P.G.R.; Jaque, D. (2008) Confocal luminescence investigations of two-beam direct-uv-written silica-on-silicon waveguides. Ieee Journal of Quantum Electronics, 44 (11-12). pp. 1219-1224. ISSN 0018-9197

Ahmad, M.A.; Daud, W.M.A.W.; Aroua, M.K. (2008) Adsorption kinetics of various gases in carbon molecular sieves (CMS) produced from palm shell. Colloids and Surfaces a-Physicochemical and Engineering Aspects, 312 (2-3). pp. 131-135. ISSN 0927-7757

Ahmad, M.A.; Daud, W.m.a.w; Aroua, M.K. (2008) CO(2)/CH(4) and O(2)/N(2) kinetic selectivities of oil palm shell-based carbon molecular sieves. Journal of Oil Palm Research, 20. pp. 453-460. ISSN 1511-2780

Ahmad, M.A.; Ma Wan Daud, W.; Aroua, M.K. (2008) C02/Ch4 And 02/N2 kinetic selectivities of oil palm shell-based carbon molecular sieves. Journal of Oil Palm Research, 20 (JUNE). pp. 453-460. ISSN 15112780

Ahmad, R.; Jamaluddin, H.; Hussain, M. A. (2008) Application of memetic algorithm in modelling discrete-time multivariable dynamics systems. Mechanical Systems and Signal Processing, 22 (7). pp. 1595-1609. ISSN 0888-3270

Ahmed, M.; Mekhilef, S. (2008) A three-phase three-level voltage source inverter with a three-phase two-level inverter as a main circuit. In: 4th IET International Conference on Power Electronics, Machines and Drives, PEMD 2008, York.

Ahmed, M.E.; Mekhilef, S. (2008) Three-phase three-level nine switches inverter employing space vector modulation. In: 2008 12th International Middle East Power System Conference, MEPCON 2008, Aswan.

Alam, A.; Jumaat, M.Z. (2008) "Experimental and analytical investigations on the structural behavoiur of steel plate and cfrp laminate flexurally strengthened r.c. beams". Journal of Applied Sciences, 8 (23). 4383-4389. ISSN 1812-5654

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2008) Concurrent collaboration in research and development. In: National Conference on Design and Concurrent Engineering (DECON) 2008, 28-29 October 2008, Melaka, Malaysia.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2008) Dealing with virtual R&D teams in new product development. In: The 9th Asia Pacific Industrial Engineering & Management Systems Conference and the 11th Asia Pacific Regional Meeting of the International Foundation for Production Research, 3 - 5 December, Nusa Dua, Bali - Indonesia.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2008) Literature, principle and the basics of network value creation in R&D: the relationship with economy. In: Seventh conference of Industries and Mines R&D Centers- R&D and Network Value Creation, 29-30 June, IRIB Int'l. Conference Center, Tehran, Iran.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2008) New product development in virtual environment. In: 2008 International Conference on Technology Management and Innovation in China: Challenges and Opportunities in the 21st Century, 21st – 23rd October, UIBE, Beijing, China.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2008) R&D networking and value creation in SMEs. In: Seventh conference of Industries and Mines R&D Centers- R&D and Network Value Creation, 29-30 June, IRIB Int'l. Conference Center, Tehran, Iran.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2008) Virtual R&D Teams for NPD in SMEs: Past, Present and Future Trend. In: APCMOTTE2008 (Asia pacific Conference on Management of Technology and Technology Entrepreneurship) , 29-30 October, Melaka, Malaysia.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2008) Virtual R&D teams: a sustainable infrastructure for promoting SMEs. In: 2nd Engineering Conference (EnCon 2008), 18-19 December, Crowne Plaza Riverside Hotel, Kuching, Sarawak, Malaysia.

Ale Ebrahim, N.; Ahmed, S.; Taha , Z. (2008) Virtual environments innovation and R&D activities: management challenges. In: Proceedings of the International Graduate on Engineering and Science (IGCES'08), 23 - 24 December, Universiti Teknologi Malaysia, Johor Bahru, Malaysia.

Alengaram, U.J.; Jumaat, M.Z.; Mahmud, H. (2008) Ductility behaviour of reinforced palm kernel shell concrete beams. European Journal of Scientific Research, 23 (3). pp. 406-420. ISSN 1450216X

Alengaram, U.J.; Jumaat, M.Z.; Mahmud, H. (2008) Influence of cementitious materials and aggregates content on compressive strength of palm kernel shell concrete. Journal of Applied Sciences, 8 (18). pp. 3207-3213. ISSN 18125654

Annuar, M.S.M.; Tan, I.K.P.; Ibrahim, S.; Ramachandran, K.B. (2008) A kinetic model for growth and biosynthesis of medium-chain-length poly-(3-hydroxyalkanoates) in Pseudomonas putida. Brazilian Journal of Chemical Engineering, 25 (2). pp. 217-228. ISSN 0104-6632

Aroua, M.K.; Daud, W.M.A.W.; Yin, C.Y.; Adinata, D. (2008) Adsorption capacities of carbon dioxide, oxygen, nitrogen and methane on carbon molecular basket derived from polyethyleneimine impregnation on microporous palm shell activated carbon. Separation and Purification Technology, 62 (3). pp. 609-613. ISSN 1383-5866

Aroua, M.K.; Leong, S.P.P.; Teo, L.Y.; Yin, C.Y.; Daud, W.M.A.W. (2008) Real-time determination of kinetics of adsorption of lead(II) onto palm shell-based activated carbon using ion selective electrode. Bioresource Technology, 99 (13). pp. 5786-5792. ISSN 0960-8524

B

Baroutian, S.; Aroua, M.K.; Abdul Raman, A.A.; Nik Sulaiman, N.M. (2008) Estimation of vegetable oil-based Ethyl esters biodiesel densities using artificial neural networks. Journal of Applied Sciences, 8 (17). pp. 3005-3011. ISSN 18125654 (ISSN)

Baroutian, S.; Aroua, M.K.; Raman, A.A.A.; Sulaiman, N.M.N. (2008) Densities of ethyl esters produced from different vegetable oils. Journal of Chemical and Engineering Data, 53 (9). pp. 2222-2225. ISSN 0021-9568

Baroutian, S.; Aroua, M.K.; Raman, A.A.A.; Sulaiman, N.M.N. (2008) Density of palm oil-based methyl ester. Journal of Chemical and Engineering Data, 53 (3). pp. 877-880. ISSN 0021-9568

Baroutian, S.; Aroua, M.K.; Raman, A.A.A.; Sulaiman, N.M.N. (2008) Prediction of palm oil-based methyl ester biodiesel density using artificial neural networks. Journal of Applied Sciences, 8 (10). pp. 1938-1943. ISSN 18125654 (ISSN)

Benamor, A.; Ali, B.S.; Aroua, M.K. (2008) Kinetic of CO2 absorption and carbamate formation in aqueous solutions of diethanolamine. Korean Journal of Chemical Engineering, 25 (3). pp. 451-460. ISSN 0256-1115

D

Deboucha, S.; Hashim, R.; Alwi, A. (2008) Engineering properties of stabilized tropical peat soils. Electronic Journal of Geotechnical Engineering, 13 E. pp. 1-9. ISSN 10893032

F

Faisal, T.; Ibrahim, F.; Taib, M.N. (2008) Analysis of significant factors for dengue infection prognosis using the self organizing map. Conference proceedings : Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference, 2008. pp. 5140-5143. ISSN 1557170X

Faisal, T.; Ibrahim, F.; Taib, M.N. (2008) Determination of the bioimpedance analysis parameters in dengue patients using the self organizing map. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

G

Ghafari, S.; Hasan, M.; Aroua, M.K. (2008) Bio-electrochemical removal of nitrate from water and wastewater-A review. Bioresour Technol, 99 (10). pp. 3965-3974. ISSN 0960-8524

Ghasem, N.M.; Ang, W.L.; Hussain, M.A. (2008) Dynamic model for polyethylene production in a multizone circulating reactor. Chemical Product and Process Modeling, 3 (1). ISSN 19342659

H

Haj-Taieb, M.; Haseeb, A.S.M.A.; Caulfield, J.; Bade, K.; Aktaa, J.; Hemker, K.J. (2008) Thermal stability of electrodeposited LIGA Ni-W alloys for high temperature MEMS applications. Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems, 14 (9-11). pp. 1531-1536. ISSN 0946-7076

Hasan, MM; Haseeb, A.; Saidur, R.; Masjuki, HH (2008) Effects of annealing treatment on optical properties of anatase TiO2 thin films. International Journal of Chemical and Biological Engineering, 1. p. 2.

Hasanuzzaman, M.; Saidur, R.; Masjuki, H. H. (2008) Investigation of energy consumption and energy savings of refrigerator-freezer during open and closed door condition. Journal of Applied Sciences, 8 (10). pp. 1822-1831. ISSN 1812-5654

Hasanuzzaman, M.; Saidur, R.; Masjuki., H.H. (2008) Moisture transfer and energy losses of household refrigeratorfreezer during the closed door operation. International Journal of Mechanical and Materials Engineering, 3 (1). 30-37..

Haseeb, A.S.M.A.; Albers, U.; Bade, K. (2008) Friction and wear characteristics of electrodeposited nanocrystalline nickel-tungsten alloy films. Wear, 264 (1-2). pp. 106-112. ISSN 0043-1648

Haseeb, A.S.M.A.; Bade, K. (2008) LIGA fabrication of nanocrystalline Ni-Walloy micro specimens from ammonia-citrate bath. Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems, 14 (3). pp. 379-388. ISSN 0946-7076

Hashim, R.; Islam, M.S. (2008) Properties of stabilized peat by soil-cement column method. Electronic Journal of Geotechnical Engineering, 13 J. pp. 1-9. ISSN 10893032

Hashim, R.; Islam, M.S. (2008) A model study to determine engineering properties of peat soil and effect on strength after stabilisation. European Journal of Scientific Research, 22 (2). pp. 205-215. ISSN 1450216X

Hashim, R.; Islam, S. (2008) Engineering properties of peat soils in peninsular, Malaysia. Journal of Applied Sciences, 8 (22). pp. 4215-4219. ISSN 18125662

Hasikin, K.; Ibrahim, F.; Soin, N. (2008) Determination of design parameters of a biosensor for human artery pulse wave detection. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Hasikin, K.; Ibrahim, F.; Soin, N. (2008) Modeling of a micro-diaphragm biosensor for human artery pulse wave detection. In: 2008 IEEE International Conference on Semiconductor Electronics, ICSE 2008, 2008, Johor Bahru, Johor.

Hasikin, K.; Soin, N.; Ibrahim, F. (2008) Modeling of an optical diaphragm for human pulse pressure detection. WSEAS Transactions on Electronics, 5 (11). pp. 447-456. ISSN 11099445 (ISSN)

I

Ibrahim, F.; Ahmad, W.A.W. (2008) Study of heart rate changes in different salat's positions. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Ibrahim, M.N.M.; Ibrahim, F.; Razack, A.H. (2008) Web based online diagnosis for erectile dysfunction using International Index of Erectile Function (IIEF). In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Ibrahim, M.R.; Karim, M.R.; Kidwai, F.A. (2008) The effect of digital count-down display on signalized junction performance. American Journal of Applied Sciences, 5 (5). pp. 479-482. ISSN 15469239

Ibrehem, A. S.; Hussain, M. A.; Ghasem, N. M. (2008) Mathematical model and advanced control for gas-phase olefin polymerization in fluidized-bed catalytic reactors. Chinese Journal of Chemical Engineering, 16 (1). pp. 84-89. ISSN 1004-9541

Islam, S.; Hashim, R. (2008) Stabilization of peat by deep mixing method: a critical review of the state of practics. Electronic Journal of Geotechnical Engineering, 13 H. ISSN 10893032

Issabayeva, G.; Aroua, M.K.; Sulaiman, N.M. (2008) Continuous adsorption of lead ions in a column packed with palm shell activated carbon. Journal of Hazardous Materials, 155 (1-2). pp. 109-113. ISSN 0304-3894

J

Jang, M.; Chen, W.; Cannon, F.S. (2008) Preloading hydrous ferric oxide into granular activated carbon for arsenic removal. Environmental Science and Technology, 42 (9). pp. 3369-3374. ISSN 0013936X

Jing, L.; Mekhilef, S. (2008) DSP based implementation of adaptive speed controller for three-phase induction motor. In: 2008 IEEE Region 10 Conference, TENCON 2008, Hyderabad.

Jumaat, M.Z.; Alam, M.A. (2008) Behaviour of U and L shaped end anchored steel plate strengthened reinforced concrete beams. European Journal of Scientific Research, 22 (2). pp. 184-196. ISSN 1450216X

Jumaat, M.Z.; Alam, M.A. (2008) Strengthening of RC beams using externally bonded plates and anchorages. Australian Journal of Basic and Applied Sciences, 3 (3). pp. 2207-2211. ISSN 1991-8178

Jumaat, M.Z.; Razali, F.M.; Rahim, A.H.A. (2008) Development of limit state design method for Malaysian bolted timber joints. In: 10th World Conference on Timber Engineering 2008, Miyazaki.

Jumaat, M.Z.; Tosee, V.R. (2008) An inestigation in mechanical properties and workability of lightweight concrete with various percentages of scoria instead of sand. In: 11th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC-11, Taipei.

K

Kadri, N.A.; Raha, M.G.; Abu Osman, N.A.; Wan Abas, W.A.B. (2008) The first decade of biomedical engineering degree program at the University of Malaya: experiences and achievements. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Kim, T.H.; Jang, M.; Park, J.K. (2008) Bifunctionalized mesoporous molecular sieve for perchlorate removal. Microporous and Mesoporous Materials, 108 (1-3). pp. 22-28. ISSN 1387-1811

M

Mahdiraji, G.A.; Abdullah, M.K.; Abas, A.F.; Mokhtar, M.; Mohammadi, A.M. (2008) Analysis of the transmission performance of optical signals based on duty cycle division multiplexing (DCDM). In: Telecommunication Technologies 2008 and 2008 2nd Malaysia Conference on Photonics. NCTT-MCP 2008. 6th National Conference on, 2008.

Malekmohammadi, A.; Abdullah, M.K.; Abas, A.F.; Mahdiraji, G.A.; Mokhtar, M. (2008) Absolute Polar Duty Cycle Division Multiplexing (APDCDM); technique for wireless communications. In: Computer and Communication Engineering, 2008. ICCCE 2008. International Conference on, 2008.

Malekmohammadi, A.; Abdullah, M.K.; Mahdiraji, G.A.; Abas, A.F.; Mokhtar, M. (2008) 30Gb/s absolute polar duty cycle division multiplexing in dispersion uncompensated optical systems. In: Telecommunication Technologies 2008 and 2008 2nd Malaysia Conference on Photonics. NCTT-MCP 2008. 6th National Conference on.

Malekmohammadi, A.; Abdullah, M.K.; Mahdiraji, G.A.; Abas, A.F.; Mokhtar, M.; Rasid, M.F.A.; Basir, S.M. (2008) Decision circuit and bit error rate estimation for absolute polar duty cycle division multiplexing. International Review of Electrical Engineering-Iree, 3 (4). pp. 592-599. ISSN 1827-6660

Malekmohammadi, A.; Mahdiraji, G.A.; Abas, A.F.; Abdullah, M.K.; Mokhtar, M.; Fadlee, M.; Rasid, A. (2008) Performance analysis on transmission of multilevel optical pulses using Absolute Polar Duty Cycle Division multiplexing. In: Electronic Design, 2008. ICED 2008. International Conference on, 2008.

Mardziah, CM; Sopyan, I; Hamdi, M.; Ramesh, S (2008) Synthesis and characterization of strontium-doped hydroxyapatite powder via sol-gel method. The Medical journal of Malaysia, 63. pp. 79-80. ISSN 0300-5283

Mekhilef, S.; Ahmed, M.E.; Younis, M.A.A. (2008) Performance of grid connected photovoltaic inverter with maximum power point tracker and power factor control. In: IEEE Canadian Conference on Electrical and Computer Engineering, CCECE 2008, Niagara Falls, ON.

Messikh, T.; Mekhilef, S.; Rahim, N.A. (2008) Adaptive notch filter for harmonic current mitigation. International Journal of Electrical and Electronics Engineering, 1 (4). p. 240.

Misran, H.; Singh, R.; Yarmo, M.A. (2008) Nonsurfactant route of fatty alcohols decomposition for templating of mesoporous silica. Microporous and Mesoporous Materials, 112 (1-3). pp. 243-253. ISSN 1387-1811

Mohamed, A.H.; Moghavvemi, M.; Ibrahim, W.M.A.W. (2008) A new device to measure the changes in blood volume during pulseatile cycle non-invasively. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 25 - 28 June 2008, Kuala Lumpur, Malaysia.

Mohamed, A.H.; Moghavvemi, M.; Wan Ibrahim, W.M.A. (2008) Measurement of Artery Stiffness Index (ASI) using blood volume pulse. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 25 - 28 June 2008, Kuala Lumpur, Malaysia.

Mohamed, H.A.F.; Askari, M.; Moghavvemi, M.; Yang, S.S. (2008) Nonlinear system identification by fuzzy piecewise affine models. In: SICE Annual Conference 2008 - International Conference on Instrumentation, Control and Information Technology, 20 - 22 August 2008, Tokyo, Japan.

Mohamed, H.A.F.; Hassan, L.H.; Moghavvemi, M.; Yang, S.S. (2008) Load frequency controller design for Iraqi National Super Grid System using Fuzzy logic controller. In: SICE Annual Conference 2008 - International Conference on Instrumentation, Control and Information Technology, 20 - 22 August 2008, Tokyo,Japan.

Mohamed, H.A.F.; Lau, E.L.; Moghavvemi, M.; Yang, S.S. (2008) Reduced chatter bang-bang-like SMC flux and speed control of induction motor. In: SICE Annual Conference 2008 - International Conference on Instrumentation, Control and Information Technology, 20 - 22 August 2008, Tokyo, Japan.

Mohamed, H.A.F.; Lau, E.L.; Yang, S.S.; Moghavvemi, M. (2008) Fuzzy-SMC-PI flux and speed control for induction motors. In: 2008 IEEE International Conference on Robotics, Automation and Mechatronics, RAM 2008, 21 - 24 September 2008, Chengdu,China.

Mohamed, H.A.F.; Yang, S.S.; Moghavvemi, M. (2008) Design and real-time implementation of an internal model speed control for an induction motor. In: 2008 IEEE International Conference on Robotics, Automation and Mechatronics, RAM 2008, 21 - 24 September 2008, Chengdu,China.

Mohamed, H.A.F.; Yang, S.S.; Moghavvemi, M. (2008) Integral sliding mode control for improved robustness and accuracy of induction motors. In: 17th World Congress, International Federation of Automatic Control, IFAC, 6 - 11 July 2008, Seoul,South Korea.

Mohamed, H.A.F.; Yang, S.S.; Moghavvemi, M. (2008) Sliding mode sensor fault tolerant control structure for induction motor. In: SICE Annual Conference 2008 - International Conference on Instrumentation, Control and Information Technology, 20 - 22 August 2008, Tokyo, Japan.

Mohammadi, A.M.; Abdullah, M.K.; Mahdiraji, G.A.; Abas, A.F.; Mokhtar, M. (2008) Complementary unipolar duty cycle division multiplexing (CUDCDM) technique for wireless communications. In: Proceedings of the Fifth IASTED International Conference on Communication Systems and Networks, 2008.

Mohktar, M.S.; Ibrahim, F. (2008) Assessment of salat taraweeh and fasting effect on body composition. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Mokhtar, N.; Sugisaka, M.; Lung, L.T.; Hamzah, A.; Mubin, M.; Md Shah, N. (2008) Positioning and navigation of mobile robot. Artificial Life and Robotics, 13 (1). pp. 255-258. ISSN 1433-5298

Monajemi, H.; Abdul Razak, H. (2008) The effect of external wings on the behavior of suction anchor. In: 12th International Conference on Computer Methods and Advances in Geomechanics 2008, 2008, Goa.

Mubin, M.; Ouchi, S.; Kodani, N.; Mokhtar, N.; Arof, H. (2008) Control of vehicle driving model by non-linear controller. In: 2008 International Symposium on Communications and Information Technologies, ISCIT 2008, 2008, Vientiane.

Mubin, M.; Ouchi, S.; Kodani, N.; Mokhtar, N.; Soin, N. (2008) Stability of two-inertia system using non-linear controller: application to drive-control system of electric vehicle. In: 13th International Symposium on Artificial Life and Robotics, AROB 13th'08, 2008, Oita.

N

NH, A.K.; Yahaya, N.A.; NA, A.O.; Kasim, N.L. (2008) Relationship of the light intensity of selected light curing units with varying distance and angulation of the light curing tip and lightmeter. Annals of Dentistry, 15 (1). pp. 33-39. ISSN 0128-7532

Naher, S.; Haseeb, A.S.M.A. (2008) Production and purification of zircon opacifier from zircon found in the coastal area of Bangladesh. Journal of Materials Processing Technology, 205 (1-3). pp. 203-206. ISSN 0924-0136

Ng, K.H.; Abdullah, B.J.J.; Kadri, N.A. (2008) A concern about plagiarism. Biomedical Imaging and Intervention Journal, 4 (2). ISSN 18235530 (ISSN)

Ng, K.H.; Abdullah, B.J.J.; Kadri, N.A. (2008) The journey so far. Biomedical Imaging and Intervention Journal, 4 (1). ISSN 18235530 (ISSN)

O

Osman, N.A.; Abu; Yahud, S.; Goh, S.Y. (2008) Development of mechanical prosthetic hand system for BCI application. European Journal of Scientific Research, 20 (4). p863.

Othman, S.H.; Ibrahim, F.; Omar, S.Z.; Rahim, R.B.A. (2008) Flexion relaxation phenomenon of back muscles in discriminating between healthy and chronic low back pain women. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

R

Rahim, H.A.; Ibrahim, F.; Taib, M.N. (2008) Model order selection criterion for monitoring haemoglobin status in dengue patients using ARX model. In: 5th International Conference on Information Technology and Applications in Biomedicine, ITAB 2008 in conjunction with 2nd International Symposium and Summer School on Biomedical and Health Engineering, IS3BHE 2008, 2008, Shenzhen.

Rajendran, S.; Arof, H.; Ibrahim, F.; Yegappan, S. (2008) Review on technical aspects of image acquisition, analysis and retrieval for leukaemia cells. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Rashid, M. M.; Rahim, N. A.; Hussain, M. A.; Mohamed, F.; Rahman, M. A. (2008) Development and testing of hybrid fuzzy logic controller for car suspension system using magneto-rheological damper. In: 2008 IEEE Industry Applications Society Annual Meeting, IAS'08, 2008, Edmonton, AB.

Rashid, Mohd Mahbubur; Hussain, Mohd Azalan; Rahim, Nasrudin Abel; Salit, Mohd Sapuan (2008) Development of controllers for a nonlinear quarter car active suspension system. International Journal of Vehicle Autonomous Systems, 6 (3/4). pp. 376-395. ISSN 1471-0226

S

Saad, M.; Cheng, H.L.; Halim, A.; Abu Bakar, D. (2008) Investigation of transient performance of capacitor voltage transformer (CVT). The Institution of Engineers, Malaysia, 71 (2). pp. 44-50.

Saidur, R.; Hasan, MM; Haseeb, A.; Masjuki, HH (2008) Energy-efficient optical coating for flat glass. Journal of Applied Sciences, 8 (10). pp. 1883-1890. ISSN 1812-5654

Saidur, R.; Jahirul, M.I.; Hasanuzzaman, M.; Masjuki, H.H. (2008) Analysis of exhaust emissions of natural gas engine by using response surface methodology. Journal of Applied Sciences, 8 (19). pp. 3328-3339. ISSN 18125654

Saidur, R.; Masjuki, H. H. (2008) Energy and associated emission analysis in office buildings. International Journal of Mechanical and Materials Engineering, 3 (1). pp. 90-96. ISSN 1823-0334

Saidur, R.; Masjuki, H. H.; Hasanuzzaman, M.; Kai, G. S. (2008) Investigation of energy performance and usage behavior of domestic refrigerator freezer using clustering and segmentation. Journal of Applied Sciences, 8 (21). pp. 3957-3962. ISSN 1812-5654

Saidur, R.; Masjuki, H.H. (2008) Application of artificial neural networks to investigate the energy performance of household refrigerator-freezers. Journal of Applied Sciences, 8 (11). pp. 2142-2149. ISSN 1812-5654

Saidur, R.; Masjuki, H.H.; Hasanuzzaman, M.; Mahlia, T.M.I.; Tan , C.Y.; Ooi, J.K.; Yoon, P.H. (2008) Performance investigation of a solar powered thermoelectric refrigerator. International Journal of Mechanical and Materials Engineering, 3 (1). pp. 7-16. ISSN 1823-0334

Salahuddin, M.H.R.; Wan Abas, W.A.B.; Abu Osman, N.A.; Ibrahim, F.; Rahim, R.B.A. (2008) Preliminary study: The impact of moderate exercises on biomechanical response of the humans muscles. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Salahuddin, M.H.R.; Wan Abas, W.A.B.; Abu Osman, N.A.; Ibrahim, F.; Rahim, R.B.A. (2008) Preliminary study: the impact of moderate exercises on biomechanical response of the humans muscles. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Sattar, M.A.; Saidur, R.; Masjuki, H.H. (2008) Experimental investigation on the performance of domestic refrigerator using isobutane and mixture of propane, butane and isobutene. AU Journal.

Sethu, V.S.; Aziz, A.R.; Aroua, M.K. (2008) Recovery and reutilisation of copper from metal hydroxide sludges. Clean Technologies and Environmental Policy, 10 (2). pp. 131-136. ISSN 1618-954X

Sing, W. L.; Hashim, R.; Ali, F. (2008) Engineering behaviour of stabilized peat soil. European Journal of Scientific Research, 21 (4). pp. 581-591. ISSN 1450216X

Sing, W.L.; Hashim, R.; Ali, F.H. (2008) Compression rates of untreated and stabilized peat soils. Electronic Journal of Geotechnical Engineering, 13 F. ISSN 10893032

Soh, C.S.; Raveendran, P.; Mukundan, R. (2008) Mathematical models for prediction of active substance content in pharmaceutical tablets and moisture in wheat. Chemometrics and Intelligent Laboratory Systems, 93 (1). pp. 63-69. ISSN 0169-7439

Sopyan, I.; Singh, R.; Hamdi, M. (2008) Synthesis of nano sized hydroxyapatite powder using sol-gel technique and its conversion to dense and porous bodies. Indian Journal of Chemistry Section a-Inorganic Bio-Inorganic Physical Theoretical & Analytical Chemistry, 47 (11). pp. 1626-1631. ISSN 0376-4710

T

Tan, C.Y.; Ramesh, S; Aw, K.L.; Yeo, W.H; Hamdi, M.; Sopyan, I (2008) Effect of powder calcination on the sintering of hydroxyapatite. Medical Journal of Malaysia, 63. pp. 87-88. ISSN 0300-5283

U

Ustun, T.S.; Mekhilef, S. (2008) A quasi-resonant soft switching 48-pulse PWM inverter with closed loop current control for the realization of FACTS devices. In: 2008 Australasian Universities Power Engineering Conference, AUPEC 2008, Sydney, NSW.

W

Wahab, A.K.A.; Mohd Azlan, H.; Omar, R. (2008) Fuzzy logic controller for a partially simulated chemical reactor system. UNSPECIFIED.

Wahab, Abdul; Khairi, Ahmad; Hussain, Mohamed Azlan; Omar, Rosli (2008) An artificial intelligence software-based controller for temperature control of a partially simulated chemical reactor system. Chemical Product and Process Modeling, 3 (1).

Wazed, M.A.; Ahmed, S.; Bin Yusoff, N. (2008) A review of commonality models in manufacturing resources planning: state-of-the-art and future directions. In: International Conference Technology Management and Innovation in China: Challenges and Opportunities in the 21st Century, 2008.

Wong, L.S.; Hashim, R.; Ali, F.H. (2008) Strength and permeability of stabilized peat soil. Journal of Applied Sciences, 8 (21). pp. 3986-3990. ISSN 18125654

Y

Yahya, S.; Mohamed, H.A.F.; Moghavvemi, M.; Yang, S.S. (2008) A geometrical inverse kinematics method for hyper-redundant manipulators. In: 2008 10th International Conference on Control, Automation, Robotics and Vision, ICARCV 2008, 17 - 20 December 2008, Hanoi, Viet Nam..

Yang, S.S.; Chen, J.; Mohamed, H.A.F.; Moghavvemi, M. (2008) Sensor fault tolerant controller for a double inverted pendulum system. In: 17th World Congress, International Federation of Automatic Control, IFAC, 6 - 11 July 2008, Seoul, South Korea.

Yang, S.S.; Mid, E.C.; Mohamed, H.A.F.; Moghavvemi, M. (2008) Practical sensor fault tolerant control system. In: SICE Annual Conference 2008 - International Conference on Instrumentation, Control and Information Technology, 20 - 22 August 2008, Tokyo, Japan.

Yang, S.S.; Mid, E.C.; Mohamed, H.A.F.; Moghavvemi, M.; Chen, J. (2008) Modified feedback configuration for sensor fault tolerant control. In: 2008 10th International Conference on Control, Automation, Robotics and Vision, ICARCV 2008 , 17 - 20 December 2008, Hanoi, Viet Nam.

Yang, S.S.; Mohamed, H.A.F.; Moghavvemi, M.; Goh, Y.H. (2008) Leakage detection via model based method. In: 2008 IEEE International Conference on Robotics, Automation and Mechatronics, RAM 2008, 21- 24 September 2008, Chengdu, China.

Yau, Y.H. (2008) A preliminary thermal comfort study in tropical buildings Located in Malaysia. International Journal of Mechanical and Materials Engineering, 3 (2). pp. 119-126. ISSN 1823-0334

Yau, Y.H.; Foo, Y.W.; Mohyi , M.H.H. (2008) A preliminary study on HVAC systems and thermal comfort in a Tropical university building in Malaysia. International Journal of Mechanical and Materials Engineering, 3 (2). pp. 160-175. ISSN 1823-0334

Yin, C.Y.; Aroua, M.K.; Daud, W.M.A.W. (2008) Enhanced adsorption of metal ions onto polyethyleneimine-impregnated palm shell activated carbon: Equilibrium studies. Water Air and Soil Pollution, 192 (1-4). pp. 337-348. ISSN 0049-6979

Yin, C.Y.; Aroua, M.K.; Daud, W.M.A.W. (2008) Polyethyleneimine impregnation on activated carbon: Effects of impregnation amount and molecular number on textural characteristics and metal adsorption capacities. Materials Chemistry and Physics, 112 (2). pp. 417-422. ISSN 0254-0584

Yogarajan, M.P.; Ibrahim, F.; Soin, N. (2008) Effect of electrode geometric parameters on droplet translocation in digital micro-fluidic biosensor. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Younis, M.A.A.; Rahim, N.A.; Mekhilef, S. (2008) Dynamic and control of fuel cell system. In: 2008 3rd IEEE Conference on Industrial Electronics and Applications, ICIEA 2008, Singapore.

This list was generated on Sat Sep 20 12:06:22 2014 MYT.