Enhanced adsorption of metal ions onto polyethyleneimine-impregnated palm shell activated carbon: Equilibrium studies

Yin, C.Y. and Aroua, M.K. and Daud, W.M.A.W. (2008) Enhanced adsorption of metal ions onto polyethyleneimine-impregnated palm shell activated carbon: Equilibrium studies. Water Air and Soil Pollution, 192 (1-4). pp. 337-348. ISSN 0049-6979

Full text not available from this repository. (Request a copy)
Official URL: http://link.springer.com/article/10.1007/s11270-00...

Abstract

In this study, palm shell activated carbon was impregnated with polyethyleneimine (PEI) and the effect of impregnation on batch adsorption of Ni2+, Cd2+or Pb2+ as well as the equilibrium behavior of adsorption of metal ions on PEI-impregnated AC were investigated. PEI impregnation evidently increased the single metal adsorption capacities of Ni2+ or Cd2+except for Pb2+, where its adsorption capacities were reduced by 16.67 and 19.55 for initial solution pH of 3 and 5 respectively. This suggested that PEI-impregnated AC could be used for selective separation of Pb2+ ions from other metal ions. The adsorption data of all the metal ions on both virgin and PEI-impregnated AC for both initial solution pH of 3 and 5 generally fitted the Langmuir and Redlich-Peterson isotherms considerably better than the Freundlich isotherm.

Item Type: Article
Additional Information: Cited By (since 1996):6 Export Date: 21 April 2013 Source: Scopus CODEN: WAPLA :doi 10.1007/s11270-008-9660-9 Language of Original Document: English Correspondence Address: Yin, C. Y.; Faculty of Chemical Engineering, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia; email: yinyang@salam.uitm.edu.my : Chemicals/CASactivated carbon, 64365-11-3, 82228-96-4; cadmium, 22537-48-0, 7440-43-9; lead, 7439-92-1; nickel, 7440-02-0; polyethyleneimine, 74913-72-7 References: Ali, U.F.M., Aroua, M.K., Daud, W.M.A.W., Modification of a granular palm shell based activated carbon by acid pre-treatment for enhancement of copper adsorption (2004) Third Technical Postgraduate Symposium, , Paper presented at the, Kuala Lumpur, Malaysia, December; Brown, P., Jefcoat, I.A., Parrish, D., Gill, S., Graham, E., Evaluation of the adsorptive capacity of peanut hull pellets for heavy metals in solution (2000) Advances in Environmental Science, 4, pp. 19-29; Chingombe, P., Saha, B., Wakeman, R.J., Effect of surface modification of an engineered activated carbon on the sorption of 2,4-dichlorophenoxy acetic acid and benazolin from water (2006) Journal of Colloid and Interface Science, 297, pp. 434-442; Dastgheib, S.A., Rockstraw, D.A., A model for the adsorption of single metal ion solutes in aqueous solution onto activated carbon produced from pecan shells (2002) Carbon, 40, pp. 1843-1851; Daud, W.M.A.W., Ali, W.S.W., Sulaiman, M.Z., Effect of activation temperature on pore development in activated carbon produced from palm shell (2002) Journal of Chemical Technology and Biotechnology, 78, pp. 1-5; Demirbas, E., Kobya, M., �ncel, S., Sencan, S., Removal of Ni(II) from aqueous solution by adsorption onto hazelnut shell activated carbon: Equilibrium studies (2002) Bioresource Technology, 84, pp. 291-293; (2002) Malaysian Environmental Quality Report, , Department of Environment (DOE) ISSN 0127-6433; Freundlich, H., Adsorption in solution (1906) Physical Chemistry Society, 40, pp. 1361-1368; Gustafsson, J.P., (2006) VMINTEQ 2.50 Software Manual, , http://www.lwr.kth.se/English/OurSoftware/vminteq, Retrieved January 2006 from; Hawari, A.H., Mulligan, C.N., Biosorption of lead(II), cadmium(II), copper(II) and nickel(II) by anaerobic granular biomass (2006) Bioresource Technology, 97, pp. 692-700; Hussein, M.Z., Tarmizi, R.S.H., Zainal, Z., Ibrahim, R., Badri, M., Preparation and characterization of active carbons from oil palm shells (1996) Carbon, 34, pp. 1447-1454; Issabayeva, G., (2005) Adsorption and Electroreduction of Copper and Lead Ions on Palm Shell Activated Carbon, , Dissertation, University of Malaya; Issabayeva, G., Aroua, M.K., Sulaiman, N.M.N., Removal of lead from aqueous solutions on palm shell activated carbon (2006) Bioresource Technology, 97, pp. 2350-2355; Jia, Y.F., Thomas, K.M., Adsorption of cadmium ions on oxygen surface sites in activated carbon (2000) Langmuir, 16, pp. 1114-1122; Kislenko, V.N., Oliynyk, L.P., Complex formation of polyethyleneimine with copper(II), nickel(II), and cobalt(II) ions (2002) Journal of Polymer Science a, 40, pp. 914-922; Kobya, M., Demirbas, E., Senturk, E., Ince, M., Adsorption of heavy metal ions from aqueous solutions by activated carbon prepared from apricot stone (2005) Bioresource Technology, 96, pp. 1518-1521; Kokorin, A.I., Lymar, S.V., Parmon, V.N., Structure of the polymer coil of branched polyethyleneimine in solution in the presence of copper ions (1981) Polymer Science USSR, 23, pp. 2209-2214; Kumar, K.V., Sivanesan, S., Sorption isotherm for safranin onto rice husk (2007) Dyes and Pigments, 72, pp. 130-133; Langmuir, I., The adsorption of gases on plane surfaces of glass, mica, and platinum (1918) Journal of the American Chemical Society, 40, pp. 1361-1368; Lopez-Ramon, M.V., Stoeckli, F., Moreno-Castilla, C., Carasco-Martin, F., On the characterisation of acidic and basic surface sites on carbons by various techniques (1999) Carbon, 37, pp. 1215-1221; Lua, A.C., Guo, J., Preparation and characterization of chars from oil palm waste (1998) Carbon, 36, pp. 1663-1670; Maroto-Valer, M.M., Tang, Z., Zhang, Y., CO2 capture by activated and impregnated anthracites (2005) Fuel Processing Technology, 86, pp. 1487-1502; Monser, L., Adhoum, N., Modified activated carbon for the removal of copper, zinc, chromium and cyanide from wastewater (2002) Separation and Purification Technology, 26, pp. 137-146; Mullet, M., Fievet, P., Szymczyk, A., Foissy, A., Reggiani, J.C., Pagetti, J., A simple and accurate determination of the point of zero charge of ceramic membranes (1999) Desalination, 121, pp. 41-48; Ozkaya, B., Adsorption and desorption of phenol on activated carbon and a comparison of isotherm models (2006) Journal of Hazardous Materials, 129, pp. 158-163; Park, S.J., Jang, Y.S., Pore structure and surface properties of chemically modified activated carbons for adsorption mechanism and rate of Cr(IV) (2002) Journal of Colloid and Interface Science, 249, pp. 458-463; Redlich, O., Peterson, D.L., A useful adsorption isotherm (1959) Journal of Physical Chemistry, 63, p. 1024; Saygideger, S., Gulnaz, O., Istifli, E.S., Yucel, N., Adsorption of Cd(II), Cu(II) and Ni(II) ions by Lemna minor L.: Effect of physicochemical environment (2005) Journal of Hazardous Materials, 126, pp. 96-104; Suen, S.Y., A comparison of isotherm and kinetic models for binary solute adsorption to affinity membranes (1996) Journal of Chemical Technology and Biotechnology, 65, pp. 249-257; Ucer, A., Uyanik, A., Aygun, S.F., Adsorption of Cu(II), Cd(II), Zn(II), Mn(II) and Fe(III) ions by tannic acid immobilised activated carbon (2006) Separation and Purification Technology, 47, pp. 113-118; Vladimir, S.J., Malik, D., Characterization and metal sorptive properties of oxidized active carbon (2002) Journal of Colloid and Interface Science, 250, pp. 213-220; Wu, S.N., Chen, P.J., Modification of a commercial activated carbon for metal adsorption by several approaches (2001) International Containment & Remediation Technology Conference and Exhibition, , Paper presented at, Orlando, Florida, June; Xu, X., Song, C., Andresen, J.M., Miller, B.G., Scaroni, A.W., Novel polyethylenimine-modified mesoporous molecular sieve of MCM-41 type as high-capacity adsorbent for CO2 capture (2002) Energy and Fuels, 16, pp. 1463-1469; Yin, C.Y., Aroua, M.K., Daud, W.M.A.W., Modification of granular activated carbon using low molecular weight polymer for enhanced removal of Cu 2+ from aqueous solution (2007) International Conference on Water Management and Technology Applications in Developing Countries, , Paper presented at, Kuala Lumpur, Malaysia, May; Yin, C.Y., Aroua, M.K., Daud, W.M.A.A., Impregnation of palm shell activated carbon with polyethyleneimine and its effect on Cd2+ adsorption (2007) Colloids and Surfaces A: Physicochemical and Engineering Aspects, 307, pp. 128-136
Uncontrolled Keywords: Adsorption; Isotherms; Metal ions; Palm shell activated carbon; Polyethyleneimine; Carbon Charcoal; Nickel; Shells (structures); Batch adsorption; Equilibrium studies; Palm shell; Polyethylene imine (PEI); Activated carbon; cadmium; lead; metal ion; cation; equilibrium; isotherm; nut; pH; polymer; shell; article; Langmuir Blodgett film.
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
T Technology > TP Chemical technology
Divisions: Faculty of Engineering
Depositing User: Mr Jenal S
Date Deposited: 16 Jul 2013 08:15
Last Modified: 08 Nov 2017 08:36
URI: http://eprints.um.edu.my/id/eprint/7446

Actions (login required)

View Item View Item