 | Up a level |
Abbas, Hazzim F. and Daud, Wan Mohd Ashri Wan (2009) Deactivation of palm shell-based activated carbon catalyst used for hydrogen production by thermocatalytic decomposition of methane. International Journal of Hydrogen Energy, 34 (15). pp. 6231-6241. ISSN 0360-3199, DOI https://doi.org/10.1016/j.ijhydene.2009.05.143.
Abbas, Hazzim F. and Daud, Wan Mohd Ashri Wan (2009) Thermocatalytic decomposition of methane for hydrogen production using activated carbon catalyst: Regeneration and characterization studies. International Journal of Hydrogen Energy, 34 (19). pp. 8034-8045. ISSN 0360-3199, DOI https://doi.org/10.1016/j.ijhydene.2009.08.014.
Abbas, Hazzim F. and Daud, Wan Mohd Ashri Wan (2009) Thermocatalytic decomposition of methane using palm shell based activated carbon: Kinetic and deactivation studies. Fuel Processing Technology, 90 (9). pp. 1167-1174. ISSN 0378-3820, DOI https://doi.org/10.1016/j.fuproc.2009.05.024.
Abdul Mutalib, M.I. and Dahari, M. and Hisam, N.A. and Ramlan, R. (2009) Use of suitable equation of state for the conversion of volumetric to mass flowrate in ngv refueling measurement. Journal-The Institution of Engineers, Malaysia, 7 (2). pp. 5-12.
Abdul-Wahab, Ahmad Khairi and Hussain, Mohd Azlan and Omar, Rosli (2009) Development of PARS-EX pilot plant to study control strategies. Control Engineering Practice, 17 (10). pp. 1220-1233. ISSN 0967-0661, DOI https://doi.org/10.1016/j.conengprac.2009.05.008.
Abioye, O.P. and Abdul Raman, Abdul Aziz and Agamuthu, Pariatamby (2009) Stimulated biodegradation of used lubricating oil in soil using organic wastes. Malaysian Journal of Science, 28 (2). pp. 127-133. ISSN 1394-3065,
Ahmad, Harith and Chong, Wu Yi and Thambiratnam, Kavintheran and Zulklifi, Mohd Zamani and Poopalan, Prabakaran and Thant, Muang Muang Myo and Harun, Sulaiman Wadi (2009) High Sensitivity Fiber Bragg Grating Pressure Sensor Using Thin Metal Diaphragm. IEEE Sensors Journal, 9 (12). pp. 1654-1659. ISSN 1530-437X, DOI https://doi.org/10.1109/JSEN.2009.2030388.
Ahmad, Harith and Norizan, Siti Fatimah and Zulkifli, Mohd Zamani and Harun, Sulaiman Wadi (2009) Dual-Wavelength Erbium Fiber Laser in a Simple Ring Cavity. Fiber and Integrated Optics, 28 (6). pp. 430-439. ISSN 0146-8030, DOI https://doi.org/10.1080/01468030903312130.
Ahmad, Harith and Shahabuddin, Nurul Shahrizan and Harun, Sulaiman Wadi (2009) Multi-wavelength source based on SOA and loop mirror. Optoelectronics and Advanced Materials-Rapid Communications, 3 (1). pp. 1-3. ISSN 1842-6573,
Ahmad, Harith and Shahi, Sharifeh and Harun, Sulaiman Wadi (2009) Multi-wavelength laser generation with Bismuthbased Erbium-doped fiber. Optics Express, 17 (1). pp. 203-207. ISSN 1094-4087, DOI https://doi.org/10.1364/OE.17.000203.
Ahmad, Harith and Zulkifli, Mohd Zamani and Latif, Amirah Abdul and Harun, Sulaiman Wadi (2009) Tunable dual wavelength fiber laser incorporating AWG and optical channel selector by controlling the cavity loss. Optics Communications, 282 (24). pp. 4771-4775. ISSN 0030-4018, DOI https://doi.org/10.1016/j.optcom.2009.08.066.
Ahmad, Harith and Zulkifli, Mohd Zamani and Latif, Amirah Abdul and Thambiratnam, Kavintheran and Harun, Sulaiman Wadi (2009) 17-channels S band multiwavelength Brillouin/Erbium Fiber Laser co-pump with Raman source. Laser Physics, 19 (12). pp. 2188-2193. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X09230054.
Ahmad, Harith and Zulkifli, Mohd Zamani and Latif, Amirah Abdul and Thambiratnam, Kavintheran and Harun, Sulaiman Wadi (2009) Bidirectional S-band continuous wave operation in a depressed-cladding erbium doped fiber amplifier. Journal of Optoelectronics and Advanced Materials, 11 (5). pp. 547-553. ISSN 1454-4164,
Ahmad, Harith and Zulkifli, Mohd Zamani and Latif, Amirah Abdul and Thambiratnam, Kavintheran and Harun, Sulaiman Wadi (2009) Dual wavelength fibre laser with tunable channel spacing using an SOA and dual AWGs. Journal of Modern Optics, 56 (16). pp. 1768-1773. ISSN 0950-0340, DOI https://doi.org/10.1080/09500340903289136.
Ahmad, Harith and Zulkifli, Mohd Zamani and Norizan, Siti Fatimah and Latif, Amirah Abdul and Harun, Sulaiman Wadi (2009) Controllable wavelength channels for Multiwavelength Brillouin Bismuth/Erbium based fiber Laser. Progress In Electromagnetics Research Letters, 9. pp. 9-18. ISSN 1937-6480, DOI https://doi.org/10.2528/PIERL09031905.
Ahmad, Harith and Zulkifli, Mohd Zamani and Thambiratnam, Kavintheran and Latif, S.F. and Harun, Sulaiman Wadi (2009) High power and compact switchable bismuth based multiwavelength fiber laser. Laser Physics Letters, 6 (5). pp. 380-383. ISSN 1612-2011, DOI https://doi.org/10.1002/lapl.200910007.
Ahmad, Harith and Zulkifli, Mohd Zamani and Thambiratnam, Kavintheran and Latiff, Anas Abdul and Harun, Sulaiman Wadi (2009) Switchable semiconductor optical fiber laser incorporating AWG and broadband FBG with high SMSR. Laser Physics Letters, 6 (7). pp. 539-543. ISSN 1612-2011, DOI https://doi.org/10.1002/lapl.200910024.
Ahmed, Mahrous E. and Mekhilef, Saad (2009) Design and implementation of a multi level three-phase inverter with less switches and low output voltage distortion. Journal of Power Electronics, 9 (4). pp. 593-603. ISSN 1598-2092,
Al-Alimi, A.W. and Al-Mansoori, M.H. and Abas, A.F. and Mahdi, M.A. and Adikan, Faisal Rafiq Mahamd and Ajiya, M. (2009) A stabilized tunable dual wavelength erbium-doped fiber laser with equal output power. Laser Physics, 19 (8). pp. 1850-1853. ISSN 1054-660X,
Alam, A. and Jumaat, Mohd Zamin (2009) Effects of intermediate anchors on end anchored carbon fibre reinforced polymer laminate flexurally strengthened reinforced concrete beams. Journal of Applied Sciences, 9 (1). pp. 142-148. ISSN 18125654, DOI https://doi.org/10.3923/jas.2009.142.148.
Alam, M.A. and Jumaat, Mohd Zamin (2009) Eliminating premature end peeling of flexurally strengthened reinforced concrete beams. Journal of Applied Sciences, 9 (6). pp. 1106-1113. ISSN 18125654, DOI https://doi.org/10.3923/jas.2009.1106.1113.
Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) Innovation and R&D activities in virtual team. European Journal of Scientific Research, 34 (3). pp. 297-307. ISSN 1450-216X,
Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) Modified stage-gate: a conceptual model of virtual product development process. African Journal of Marketing Management, 1 (9). pp. 211-219. ISSN 1993-8233,
Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) Virtual R&D teams in small and medium enterprises: a literature review. Scientific Research and Essays, 4 (13). pp. 1575-1590. ISSN 1992-2248,
Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) Virtual teams for new product development – an innovative experience for R&D engineers. European Journal of Educational Studies, 1 (3). pp. 109-123. ISSN 19446-6331,
Amouzad Mahdiraji, G. and Abdullah, M.K. and Mokhtar, M. and Mohammadi, A.M. and Abas, A.F. and Basir, S.M. and Abdullah, R.S.A.R. (2009) 70-Gb/s amplitude-shift-keyed system with 10-GHz clock recovery circuit using duty cycle division multiplexing. Photonic Network Communications, 19 (3). pp. 233-239. ISSN 1572-8188, DOI https://doi.org/10.1007/s11107-009-0228-4.
Aroua, M.K. and Chew, C.M. and Hussain, Mohd Azlan (2009) Modelling of chromium hexavalent reduction by ferrous ion in a batch stirred tank. Chemical Product and Process Modeling, 4 (1). ISSN 1934-2659, DOI https://doi.org/10.2202/1934-2659.1222.
Aroua, M.K. and Yin, C.Y. and Lim, F.N. and Kan, W.L. and Daud, W.M.A.W. (2009) Effect of impregnation of activated carbon with chelating polymer on adsorption kinetics of Pb2+. Journal of Hazardous Materials, 166 (2-3). pp. 1526-1529. ISSN 03043894, DOI https://doi.org/10.1016/j.jhazmat.2008.11.033.
Azuddin, M. and Rosli, M.A.M. (2009) Development and Analysis of Taper Tool Path for Micro Turning Operation. Modern Applied Science, 3 (1). pp. 176-186. ISSN 1913-1844, DOI https://doi.org/10.5539/mas.v3n1p176.
Baharuddin, M.F.T. and Hashim, Roslan and Taib, S. (2009) Electrical imaging resistivity study at the coastal area of Sungai Besar, Selangor, Malaysia. Journal of Applied Sciences, 9 (16). pp. 2897-2906. ISSN 18125654, DOI https://doi.org/10.3923/jas.2009.2897.2906.
Bani Hashim, A.Y. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Abdul Latif, L. (2009) Evaluation of a bio-mechanism by graphed static equilibrium forces. World Academy of Science, Engineering and Technology, 36. pp. 807-810. ISSN 2010376X,
Baroutian, S. and Aroua, M.K. and Abdul Raman, Abdul Aziz and Sulaiman, N.M. (2009) RBD palm olein-based methyl/ethyl esters. Journal of Oil Palm Research, 21. pp. 659-666. ISSN 1511-2780,
Che Hassan, Che Rosmani and Balasubramaniam, Puvaneswaran and Abdul Raman, Abdul Aziz and Mahmood, Noor Zalina and Foo, Chee Hong and Nik Sulaiman, Nik Meriam (2009) Inclusion of human errors assessment in failure frequency analysis-a case study for the transportation of ammonia by rail in Malaysia. Process Safety Progress, 28 (1). pp. 60-67. ISSN 1066-8527, DOI https://doi.org/10.1002/prs.10268.
Cheng, Xiau S. and Parvizi, Roghaieh and Ahmad, Harith and Harun, Sulaiman Wadi (2009) Wide-Band Bismuth-Based Erbium-Doped Fiber Amplifier With a Flat-Gain Characteristic. IEEE Photonics Journal, 1 (5). pp. 259-264. ISSN 1943-0655, DOI https://doi.org/10.1109/JPHOT.2009.2037725.
Deboucha, S. and Hashim, Roslan (2009) Durability and swelling of tropical stabilized peat soils. Journal of Applied Sciences, 9 (13). pp. 2480-2484. ISSN 18125654, DOI https://doi.org/10.3923/jas.2009.2480.2484.
Dharma, I. and Budi, Gusti Bagus and Abd Shukor, Mohd Hamdi and Ariga, Tadashi (2009) Wettability of low silver content lead-free solder alloy. Materials transactions, 50 (5). pp. 1135-1138. ISSN 1347-5320,
Dharma, I.G.B. and Abd Shukor, Mohd Hamdi and Ariga, T. (2009) The effects of adding silver and indium to lead-free solders. Welding Journal, 88 (4). pp. 45-48. ISSN 0043-2296,
Ebrahim, Nader Ale and Ahmed, Shamsuddin and Taha, Zahari (2009) Virtual teams: a literature review. Australian Journal of Basic and Applied Sciences, 3 (3). pp. 2653-2669. ISSN 1991-8178,
Emami, Siamak Dawazdah and Harun, Sulaiman Wadi and Abd-Rahman, Faidz and Abdul-Rashid, Hairul Azhar and Daud, Siti Aida and Ahmad, Harith (2009) Optimization of the 1050 nm pump power and fiber length in single-pass and double-pass thulium doped fiber amplifiers. Progress In Electromagnetics Research B, 14. pp. 431-448. ISSN 1937-6472, DOI https://doi.org/10.2528/PIERB09022503.
Fariborzi, H. and Moghavvemi, M. (2009) EAMTR: Energy aware multi-tree routing for wireless sensor networks. IET Communications, 3 (5). pp. 733-739. ISSN 17518628, DOI https://doi.org/10.1049/iet-com.2008.0238.
Fariborzi, H. and Moghavvemi, M. (2009) Wireless monitoring of cardiac activity: a critical review. International Journal of Biomedical Engineering and Technology, 2 (1). pp. 4-28. ISSN 17526418, DOI https://doi.org/10.1504/IJBET.2009.021905.
Ghafari, S. and Hasan, M. and Aroua, M.K. (2009) Effect of carbon dioxide and bicarbonate as inorganic carbon sources on growth and adaptation of autohydrogenotrophic denitrifying bacteria. Journal of Hazardous Materials, 162 (2-3). pp. 1507-1513. ISSN 0304-3894, DOI https://doi.org/10.1016/j.jhazmat.2008.06.039.
Ghafari, S. and Hasan, M. and Aroua, M.K. (2009) Improvement of autohydrogenotrophic nitrite reduction rate through optimization of pH and sodium bicarbonate dose in batch experiments. Journal of Bioscience and Bioengineering, 107 (3). pp. 275-280. ISSN 1389-1723, DOI https://doi.org/10.1016/j.jbiosc.2008.11.008.
Ghafari, S. and Hasan, M. and Aroua, M.K. (2009) Nitrate remediation in a novel upflow bio-electrochemical reactor (UBER) using palm shell activated carbon as cathode material. Electrochimica Acta, 54 (17). pp. 4164-4171. ISSN 0013-4686, DOI https://doi.org/10.1016/j.electacta.2009.02.062.
Ghasem, N.M. and Ang, W.L. and Hussain, Mohd Azlan (2009) Dynamics and stability of ethylene polymerization in multizone circulating reactors. Korean Journal of Chemical Engineering, 26 (3). pp. 603-611. ISSN 0256-1115, DOI https://doi.org/10.1007/s11814-009-0102-1.
Hamsin, M.R. and Azuddin, M. and Ahmad-Yazid, A. (2009) Design and analysis of multi-cavity traditional and H-branching runners for plastic injection mold. IEM Journal, 71 (2). pp. 22-35. ISSN 0126-513X,
Harun, Sulaiman Wadi and Moghaddam, M.R.A. and Dimyati, Kaharudin and Ahmad, Harith (2009) The performance of double-clad ytterbium-doped fiber laser with different pumping wavelengths. Laser Physics Letters, 6 (6). pp. 458-460. ISSN 1612-2011, DOI https://doi.org/10.1002/lapl.200910018.
Harun, Sulaiman Wadi and Parvizi, Roghaieh and Shahi, Sharifeh and Ahmad, Harith (2009) Compact Bi-EDF-Based Brillouin Erbium Fiber Laser Operating at the 1560-nm Region. IEEE Photonics Journal, 1 (5). pp. 254-258. ISSN 1943-0655, DOI https://doi.org/10.1109/JPHOT.2009.2037246.
Harun, Sulaiman Wadi and Parvizi, Roghaieh and Shahi, Sharifeh and Ahmad, Harith (2009) Multi-wavelength erbium-doped fiber laser assisted by four-wave mixing effect. Laser Physics Letters, 6 (11). pp. 813-815. ISSN 1612-2011, DOI https://doi.org/10.1002/lapl.200910072.
Harun, Sulaiman Wadi and Shahi, Sharifeh and Ahmad, Harith (2009) Bismuth erbium-doped fiber based multi-wavelength laser assisted by four-wave mixing process. IEICE Electronics Express, 6 (1). pp. 40-43. ISSN 1349-2543, DOI https://doi.org/10.1587/elex.6.40.
Harun, Sulaiman Wadi and Shahi, Sharifeh and Ahmad, Harith (2009) Compact Brillouin–erbium fiber laser. Optics Letters, 34 (1). p. 46. ISSN 0146-9592, DOI https://doi.org/10.1364/OL.34.000046.
Harun, Sulaiman Wadi and Yang, Hang Zhou and Lim, Kok Sing and Tamjis, Mohamad Rom and Dimyati, Kaharudin and Ahmad, Harith (2009) Fiber optic displacement sensor based on concave mirror. Optoelectronics and Advanced Materials, Rapid Communications, 3 (11). pp. 1139-1141. ISSN 1842-6573,
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan (2009) Effects of annealing treatment on optical properties of anatase TiO 2 thin films. World Academy of Science, Engineering and Technology, 40. pp. 221-225. ISSN 2010-376X,
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Hamdi, M. (2009) Synthesis and annealing of nanostructured TiO2 films by radio-frequency magnetron sputtering. Journal of Applied Sciences, 9 (15). pp. 2815-2821. ISSN 1812-5654, DOI https://doi.org/10.3923/jas.2009.2815.2821.
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Johan, Mohd Rafie (2009) Structural, optical and morphological properties of TiO2/Ag/TiO2 multilayer films. AIP Conference Proceedings, 1136 (1). pp. 229-233. ISSN 0094-243X,
Hasanuzzaman, Md and Saidur, Rahman and Masjuki, Haji Hassan (2009) Effects of operating variables on heat transfer and energy consumption of a household refrigerator-freezer during closed door operation. Energy, 34 (2). pp. 196-198. ISSN 1823-0334, DOI https://doi.org/10.1016/j.energy.2008.11.003.
Hashim, Roslan and Mohd Din, M.A. (2009) Implementing outcome based education using project based learning at University of Malaya. European Journal of Scientific Research, 26 (1). pp. 80-86. ISSN 1450216X,
Herliansyah, M.K. and Abd Shukor, Mohd Hamdi and Ide-Ektessabi, A. and Wildan, M.W. and Toque, J.A. (2009) The influence of sintering temperature on the properties of compacted bovine hydroxyapatite. Materials Science and Engineering: C, 29 (5). pp. 1674-1680. ISSN 0928-4931,
Hezam, L.M.A. and Hassan, M.A. and Hassab-Allah, I.M. and El-Sebaie, M.G. (2009) Development of a new process for producing deep square cups through conical dies. International Journal of Machine Tools and Manufacture, 49 (10). pp. 773-780. ISSN 0890-6955,
Husnawan, M. and Masjuki, Haji Hassan and Mahlia, T.M.I. and Mekhilef, Saad and Saifullah, M.G. (2009) Use of post flame metal-based and oxygenated additive combination for biodiesel-diesel blends. Journal of Scientific and Industrial Research, 68 (12). pp. 1049-1052. ISSN 0022-4456,
Ibrehem, A.S. and Hussain, Mohd Azlan (2009) Prediction of bubble size in bubble columns using artificial neural network. Journal of Applied Sciences, 9 (17). pp. 3196-3198. ISSN 1812-5654, DOI https://doi.org/10.3923/jas.2009.3196.3198.
Ibrehem, A.S. and Hussain, Mohd Azlan and Ghasem, N.M. (2009) Modified mathematical model for gas phase olefin polymerization in fluidized-bed catalytic reactor. Chemical Engineering Journal, 149 (1-3). pp. 353-362. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2008.05.014.
Ibrehem, Ahmmed S. and Hussain, Mohd Azlan and Ghasem, Nayef M. (2009) Advanced control of a fluidized bed using a model-predictive controller. Australian Journal of Basic and Applied Sciences, 3 (4). pp. 3954-3974. ISSN 1991-8178,
Islam, M.R. and Saidur, Rahman and Rahim, N.A. and Solangi, K.H. (2009) Renewable energy research in Malaysia. Engineering e-Transaction, 4 (2). pp. 69-72. ISSN 1823-6379,
Islam, Md. Shahidul and Hashim, Roslan (2009) Bearing capacity of stabilised tropical peat by deep mixing method. Australian Journal of Basic and Applied Sciences, 3 (2). pp. 682-688. ISSN 1991-8178,
Jahirul, M.I. and Saidur, Rahman and Masjuki, Haji Hassan (2009) Application of artificial neural network to predict brake specific fuel consumption of retrofitted cng engine. International Journal of Mechanical and Materials Engineering, 4 (3). pp. 249-255. ISSN 1823-0334,
Jamil, Z. and Mohamad Annuar, M.S. and Ibrahim, S. and Vikineswary, S. (2009) Optimization of phototrophic hydrogen production by Rhodopseudomonas palustris PBUM001 via statistical experimental design. International Journal of Hydrogen Energy, 34 (17). pp. 7502-7512. ISSN 0360-3199, DOI https://doi.org/10.1016/j.ijhydene.2009.05.116.
Jang, M. and Cannon, F.S. and Parette, R.B. and Yoon, S.J. and Chen, W. (2009) Combined hydrous ferric oxide and quaternary ammonium surfactant tailoring of granular activated carbon for concurrent arsenate and perchlorate removal. Water Research, 43 (12). pp. 3133-3143. ISSN 0043-1354, DOI https://doi.org/10.1016/j.watres.2009.04.021.
Jayed, M.H. and Masjuki, Haji Hassan and Saidur, Rahman and Kalam, M.A. and Jahirul, M.I. (2009) Environmental aspects and challenges of oilseed produced biodiesel in Southeast Asia. Renewable and Sustainable Energy Reviews, 13 (9). pp. 2452-2462. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2009.06.023.
Jumaat, Mohd Zamin and Alam, Md Ashraful (2009) Strengthening of R.C. beams using externally bonded plates and anchorages. Australian Journal of Basic and Applied Sciences, 3 (3). pp. 2207-2211. ISSN 1991-8178,
Jumaat, Mohd Zamin and Alengaram, Ubagaram Johnson and Mahmud, Hilmi (2009) Shear strength of oil palm shell foamed concrete beams. Materials & Design, 30 (6). pp. 2227-2236. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2008.09.024.
Kadri, Nahrizul Adib and Tan, L.K. and Ng, K.H. (2009) Riding on the crest of electronic publishing wave. Biomedical Imaging and Intervention Journal, 5 (1). ISSN 1823-5530,
Kamali, Babak and Hashim, Roslan (2009) Recent advances in stability formulae and damage description of breakwater armour layer. Australian Journal of Basic and Applied Sciences, 3 (3). pp. 2817-2827. ISSN 1991-8178,
Kamarulzaman, N. and Yusoff, R. and Kamarudin, N. and Shaari, N.H. and Aziz, N.A.A. and Bustam, M.A. and Blagojevic, N. and Elcombe, M. and Blackford, M. and Avdeev, M. and Arof, Abdul Kariem (2009) Investigation of cell parameters, microstructures and electrochemical behaviour of LiMn(2)O(4) normal and nano powders. Journal of Power Sources, 188 (1). pp. 274-280. ISSN 0378-7753, DOI https://doi.org/10.1016/j.jpowsour.2008.10.139.
Khorasani, M.A. and Abu Osman, Noor Azuan and Yusof, A. (2009) Biomechanical responds of instep kick between different positions in professional soccer players. Journal of Human Kinetics, 22. pp. 21-27. ISSN 1640-5544,
Kittisupakorn, P. and Thitiyasook, P. and Hussain, Mohd Azlan and Daosud, W. (2009) Neural network based model predictive control for a steel pickling process. Journal of Process Control, 19 (4). pp. 579-590. ISSN 0959-1524, DOI https://doi.org/10.1016/j.jprocont.2008.09.003.
Klimenkov, Michael and Haseeb, A.S. Md. Abdul and Bade, Klaus (2009) Structural investigations on nanocrystalline Ni-W alloy films by transmission electron microscopy. Thin Solid Films, 517 (24). pp. 6593-6598. ISSN 0040-6090, DOI https://doi.org/10.1016/j.tsf.2009.04.039.
Kow, Kien Woh and Abdullah, Ezzat Chan and Abdul Raman, Abdul Aziz (2009) Effects of ultrasound in coating nano-precipitated CaCO3 with stearic acid. Asia-Pacific Journal of Chemical Engineering, 4 (5). pp. 807-813. ISSN 1932-2135, DOI https://doi.org/10.1002/apj.342.
Laouar, L. and Hamadache, H. and Saad, S. and Bouchelaghem, A. and Mekhilef, Saad (2009) Mechanical surface treatment of steel-optimization parameters of regime. Proceedings of the Jmsm 2008 Conference, 2 (3). pp. 1213-1221. ISSN 18753884, DOI https://doi.org/10.1016/j.phpro.2009.11.084.
Leong, W.C. and Tho, S.Y. and Law, A.W.P. and Chong, W.Y. and Pua, C.H. and Ahmad, Harith and Haseeb, A.S. Md. Abdul and Adikan, Faisal Rafiq Mahamd (2009) Spreading profile of dopant solution on pre-sintered silica layers for selective area doping of integrated optic planar glass samples. Thin Solid Films, 518 (1). pp. 378-382. ISSN 0040-6090, DOI https://doi.org/10.1016/j.tsf.2009.06.060.
Lim, Kok Sing and Harun, Sulaiman Wadi and Yang, Hang Zhou and Dimyati, Kaharudin and Ahmad, Harith (2009) Analytical and experimental studies on asymmetric bundle fiber displacement sensors. Journal of Modern Optics, 56 (17). pp. 1838-1842. ISSN 0950-0340, DOI https://doi.org/10.1080/09500340903366009.
Mahdi, M.A. and Sheih, S.J. and Adikan, Faisal Rafiq Mahamd (2009) Simplified ASE correction algorithm for variable gain-flattened erbium-doped fiber amplifier. Optics Express, 17 (12). pp. 10069-10075. ISSN 1094-4087,
Mahdiraji, G.A. and Abdullah, M.K. and Mokhtar, M. and Malekmohammadi, A. and Abas, A.F. (2009) Duty-cycle-division-multiplexing: bit error rate estimation and performance evaluation. Optical Review, 16 (4). pp. 422-425. ISSN 1340-6000, DOI https://doi.org/10.1007/s10043-009-0081-9.
Mahdiraji, G.A. and Malekmohammadi, A. and Abas, A.F. and Mokhtar, M. (2009) A novel economical duty cycle division multiplexing with electrical multiplexer and demultiplexer for optical communication systems. International Journal of Information and Communication Technology, 2 (1). pp. 31-40. ISSN 1466-6642, DOI https://doi.org/10.1504/IJICT.2009.026427.
Mahmud, Hilmi and Jumaat, Mohd Zamin and Alengaram, U.J. (2009) Influence of sand/cement ratio on mechanical properties of palm kernel shell concrete. Journal of Applied Sciences, 9 (9). pp. 1764-1769. ISSN 18125654, DOI https://doi.org/10.3923/jas.2009.1764.1769.
Malekmohammadi, A. and Abas, A.F. and Abdullah, M.K. and Mahdiraji, G.A. and Mokhtar, M. and Rasid, M.F.A. (2009) Absolute polar duty cycle division multiplexing over wavelength division multiplexing system. Optics Communications, 282 (21). pp. 4233-4241. ISSN 0030-4018, DOI https://doi.org/10.1016/j.optcom.2009.07.049.
Malekmohammadi, A. and Abdullah, M.K. and Mahdiraji, G.A. and Abas, A.F. and Mokhtar, M. and Rasid, M.F.A. and Basir, S.M. (2009) Analysis of return-to-zero-on-off-keying over absolute polar duty cycle division multiplexing in dispersive transmission medium. IET Optoelectronics, 3 (4). pp. 197-206. ISSN 1751-8768, DOI https://doi.org/10.1049/iet-opt.2008.0050.
Malekmohammadi, A. and Mahdiraji, G.A. and Abas, A.F. and Abdullah, M.K. and Mokhtar, M. and Rasid, M.F.A. (2009) Realization of high capacity transmission in fiber optic communication systems using absolute polar duty cycle division multiplexing (AP-DCDM) technique. Optical Fiber Technology, 15 (4). pp. 337-343. ISSN 1068-5200, DOI https://doi.org/10.1016/j.yofte.2009.03.001.
Mallick, Z. and Badruddin, I.A. and Khaleed Hussain, M.T. and Salman Ahmed, N.J. and Kanesan, J. (2009) Noise characteristics of grass-trimming machine engines and their effect on operators. Noise & health, 11 (43). pp. 98-102. ISSN 1463-1741, DOI 19414929.
Md Dawal, Siti Zawiah and Taha, Zahari and Ismail, Zubaidah (2009) Effect of job organization on job satisfaction among shop floor employees in automotive industries in Malaysia. International Journal of Industrial Ergonomics, 39 (1). pp. 1-6. ISSN 0169-8141, DOI https://doi.org/10.1016/j.ergon.2008.06.005.
Mjalli, F.S. and Hussain, Mohd Azlan (2009) Approximate predictive versus self-tuning adaptive control strategies of biodiesel reactors. Industrial & Engineering Chemistry Research, 48 (24). pp. 11034-11047. ISSN 0888-5885, DOI https://doi.org/10.1021/Ie900930k.
Mjalli, F.S. and San, L.K. and Yin, K.C. and Hussain, Mohd Azlan (2009) Dynamics and control of a biodiesel transesterification reactor. Chemical Engineering & Technology, 32 (1). pp. 13-26. ISSN 0930-7516, DOI https://doi.org/10.1002/ceat.200800243.
Moghaddam, M.R.A. and Harun, Sulaiman Wadi and Paul, Mukul Chandra and Pal, Mrinmay and Dhar, Anirban and Sen, Ranjan and Das, Sumita and Bhadra, Shyamal Kumar and Ahmad, Harith (2009) Multiwavelength ytterbium-doped fiber ring laser. Microwave and Optical Technology Letters, 51 (10). pp. 2511-2512. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.24605.
Moghaddam, M.R.A. and Harun, Sulaiman Wadi and Tamjis, Mohamad Rom and Ahmad, Harith (2009) Double-clad erbium/ytterbium-doped fiber laser with a fiber Bragg grating. Laser Physics Letters, 6 (8). pp. 586-589. ISSN 1612-2011, DOI https://doi.org/10.1002/lapl.200910035.
Moghavvemi, M. and Mehrkanoon, S. (2009) Detection of the onset of epileptic seizure signal from scalp EEG using blind signal separation. Biomedical Engineering - Applications, Basis and Communications, 21 (4). pp. 287-290. ISSN 10162372, DOI https://doi.org/10.4015/S1016237209001301.
Monajemi, H. and Razak, H.A. (2009) Finite element modeling of suction anchors under combined loading. Marine Structures, 22 (4). pp. 660-669. ISSN 0951-8339, DOI https://doi.org/10.1016/j.marstruc.2009.02.001.
Moo, E.K. and Abu Osman, Noor Azuan and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar and Spence, W.D. and Solomonidis, S.E. (2009) Interface pressure profile analysis for patellar tendon-bearing socket and hydrostatic socket. Acta of Bioengineering and Biomechanics, 11 (4). pp. 37-43. ISSN 1509-409X, DOI 20405814.
Owlad, M. and Aroua, M.K. and Daud, W.M.A.W. and Baroutian, S. (2009) Removal of hexavalent chromium-contaminated water and wastewater: A review. Water Air and Soil Pollution, 200 (1-4). pp. 59-77. ISSN 0049-6979, DOI https://doi.org/10.1007/s11270-008-9893-7.
Parvizi, Roghaieh and Emami, Siamak Dawazdah and Shahi, Sharifeh and Harun, Sulaiman Wadi and Ahmad, Harith (2009) Experimental and theoretical studies on C-band bismuthbased erbium doped fiber amplifier. Optoelectronics and Advanced Materials-Rapid Communications, 3 (10). pp. 971-974. ISSN 1842-6573,
Paul, Mukul Chandra and Harun, Sulaiman Wadi and Moghaddam, M.R.A. and Das, Sagnik and Sen, Ranjan and Dhar, Anirban and Pal, Mrinmay and Bhadra, Shyamal Kumar and Ahmad, Harith (2009) 1028 nm single mode Ytterbium-doped fiber laser. Laser Physics, 19 (5). pp. 1021-1025. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X09050247.
Prihandana, Gunawan Setia and Mahardika, M. and Abd Shukor, Mohd Hamdi and Mitsui, K. (2009) Effect of m micro MoS2 powder mixed dielectric fluid on surface quality and material removal rate in micro EDM-processes. Transaction Material Research Society of Japan, 34 (2). pp. 329-332.
Rahman, Azlan and Mamat, Azuddin and Wagiman, Abdullah (2009) Effect of Machining Parameters on Hole Quality of Micro Drilling for Brass. Modern Applied Science, 3 (5). pp. 221-230. ISSN 1913-1844, DOI https://doi.org/10.5539/mas.v3n5p221.
Rahman, M.M. and Mamun, M.A.H. and Saidur, Rahman and Nagata, S. (2009) Effect of a heat conducting horizontal circular cylinder on MHD mixed convection in a lid-driven cavity along with joule heating. International Journal of Mechanical and Materials Engineering, 4 (3). pp. 256-265. ISSN 18230334,
Rashid, M.M. and Hussain, Mohd Azlan and Rahim, N.A. and Momoh, J.S. (2009) Development of fuzzy logic controller for magnetorheological rotary brake system. International Journal of Mechanical and Materials Engineering, 4 (3). pp. 232-238. ISSN 18230334 , DOI https://doi.org/10.1109/08IAS.2008.166.
Razak, H.A. and Naganathan, S. and Hamid, S.N.A. (2009) Performance appraisal of industrial waste incineration bottom ash as controlled low-strength material. Journal of Hazardous Materials, 172 (2-3). pp. 862-867. ISSN 0304-3894, DOI https://doi.org/10.1016/j.jhazmat.2009.07.070.
Saidur, R. and Sattar, M.A. and Masjuki, Haji Hassan and Jamaluddin, M.Y. (2009) Greenhouse gas emissions from refrigeration equipment in Malaysia. Energy and Environment, 20 (4). pp. 533-551. ISSN 0958305X , DOI https://doi.org/10.1260/095830509788707266.
Saidur, Rahman (2009) Energy consumption, energy savings, and emission analysis in Malaysian office buildings. Energy Policy, 37 (10). pp. 4104-4113. ISSN 0301-4215, DOI https://doi.org/10.1016/j.enpol.2009.04.052.
Saidur, Rahman and Hasanuzzaman, M. and Hasan, M.M. and Masjuki, Haji Hassan (2009) Overall thermal transfer value of residential buildings in Malaysia. Journal of Applied Sciences, 9 (11). pp. 2130-2136. ISSN 18125654, DOI https://doi.org/10.3923/jas.2009.2130.2136.
Saidur, Rahman and Masjuki, Haji Hassan and Hasanuzzaman, M. (2009) Perfromance of an improved solar car ventilator. International Journal of Mechanical and Materials Engineering, 4 (1). pp. 24-34. ISSN 1823-0334,
Saidur, Rahman and Rahim, N.A. and Masjuki, Haji Hassan and Mekhilef, Saad and Hew, Wooi Ping and Jamaluddin, M.F. (2009) End-use energy analysis in the Malaysian industrial sector. Energy, 34 (2). pp. 153-158. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2008.11.004.
Saidur, Rahman and Rahim, N.A. and Ping, H.W. and Jahirul, M.I. and Mekhilef, Saad and Masjuki, Haji Hassan (2009) Energy and emission analysis for industrial motors in Malaysia. Energy Policy, 37 (9). pp. 3650-3658. ISSN 0301-4215, DOI https://doi.org/10.1016/j.enpol.2009.04.033.
Saw, L.H. and Rahbari, R.G. and Abd Shukor, Mohd Hamdi and Yahya, Rosiyah (2009) Correlations between reaction wave propagation and phase formations in combustion of diluted TiO2–Al–C mixture. Materials Research Innovations, 13 (3). pp. 171-175. ISSN 1432-8917, DOI https://doi.org/10.1179/143307509X437536.
Sen Gupta, B. and Chatterjee, S. and Rott, U. and Kauffman, H. and Bandopadhyay, A. and DeGroot, W. and Nag, N.K. and Carbonell-Barrachina, A.A. and Mukhopadhyay, S. (2009) A simple chemical free arsenic removal method for community water supply - A case study from West Bengal, India. Environmental Pollution, 157 (12). pp. 3351-3353. ISSN 0269-7491,
Shahi, Sharifeh and Harun, Sulaiman Wadi and Ahmad, Harith (2009) Multi-wavelength Brillouin fiber laser using Brillouin-Rayleigh scatterings in distributed Raman amplifier. Laser Physics Letters, 6 (10). pp. 737-739. ISSN 1612-2011, DOI https://doi.org/10.1002/lapl.200910070.
Shahi, Sharifeh and Harun, Sulaiman Wadi and Ahmad, Harith (2009) Multi-wavelength Brillouin fiber laser using a holey fiber and a bismuth-oxide based erbium-doped fiber. Laser Physics Letters, 6 (6). pp. 454-457. ISSN 1612-2011, DOI https://doi.org/10.1002/lapl.200910014.
Shahi, Sharifeh and Harun, Sulaiman Wadi and Dimyati, Kaharudin and Ahmad, Harith (2009) Brillouin fiber laser with significantly reduced gain medium length operating in L-band region. Progress In Electromagnetics Research Letters, 8. pp. 143-149. ISSN 1937-6480, DOI https://doi.org/10.2528/PIERL09032501.
Shahi, Sharifeh and Harun, Sulaiman Wadi and Shahabuddin, Nurul Shahrizan and Shirazi, Mohammadreza Rezazadeh and Ahmad, Harith (2009) Multi-wavelength generation using a bismuth-based EDF and Brillouin effect in a linear cavity configuration. Optics & Laser Technology, 41 (2). pp. 198-201. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2008.05.009.
Shahi, Sharifeh and Harun, Sulaiman Wadi and Sulaiman, Abdul Hadi and Thambiratnam, Kavintheran and Ahmad, Harith (2009) Multiwavelength source based on SOA and EDFA in a ring-cavity resonator. Microwave and Optical Technology Letters, 51 (1). pp. 110-113. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.23970.
Shahi, Sharifeh and Moghaddam, M.R.A. and Harun, Sulaiman Wadi and Ahmad, Harith (2009) The comparison nonlinearity behaviors of photonic crystal fiber by two reduced lengths of bi-edf in ring cavity. Journal of Nonlinear Optical Physics & Materials, 18 (03). pp. 521-527. ISSN 0218-8635, DOI https://doi.org/10.1142/S0218863509004749.
Shahidul Islam, M. and Hashim, Roslan (2009) Bearing capacity of stabilized peat column using hand operated cone penetrometer. Journal of Applied Sciences, 9 (10). pp. 1968-1973. ISSN 18125654, DOI https://doi.org/10.3923/jas.2009.1968.1973.
Snow, B.D. and Adikan, Faisal Rafiq Mahamd and Gates, J.C. and Gawith, C.B.E. and Dyadyusha, A. and Major, H.E. and Kaczmarek, M. and Smith, P.G.R. (2009) Direct optical observation of walls and disclination effects in active photonic devices. Molecular Crystals and Liquid Crystals, 502. pp. 178-184. ISSN 1542-1406,
Suhailin, Fariza H. and Ali, Jalil and Yupapin, Preecha Promphan and Fujii, Yusaku and Ahmad, Harith and Harun, Sulaiman Wadi (2009) Stopping and storing light pulses within a fiber optic ring resonator. Chinese Optics Letters, 7 (9). pp. 778-780. ISSN 1671-7694, DOI https://doi.org/10.3788/COL20090709.0778.
Tamchek, Nizam and Harun, Sulaiman Wadi and Chong, Wu Yi and Ahmad, Harith (2009) Study on bismuth-based erbium-doped fiber for optical amplification. Optoelectronics and Advanced Materials, Rapid Communications, 3 (1). pp. 24-28. ISSN 1842-6573,
Thepsonthi, T. and Abd Shukor, Mohd Hamdi and Mitsui, K. (2009) Investigation into minimal-cutting-fluid application in high-speed milling of hardened steel using carbide mills. International Journal of Machine Tools and Manufacture, 49 (2). pp. 156-162.
Toque, Jay Arre and Abd Shukor, Mohd Hamdi and Ide-Ektessabi, A. and Sopyan, Iis (2009) Effect of the processing parameters on the integrity of calcium phosphate coatings produced by RF-magnetron sputtering. International Journal of Modern Physics B, 23 (31). pp. 5811-5818. ISSN 0217-9792,
Ustun, Taha Selim and Mekhilef, Saad (2009) Power line compensation study of a static synchronous series compensator (SSSC) based on soft switching 48-pulse PWM inverter. Australian Journal of Basic and Applied Sciences, 3 (2). pp. 1301-1314. ISSN 1991-8178,
Ustun, Taha Selim and Mekhilef, Saad (2009) A quasi-resonant soft switching 48-pulse PWM inverter with closed loop current control for the realization of Static Synchronous Series Compensator (SSSC). Australian Journal of Basic and Applied Sciences, 3 (3). pp. 1814-1826. ISSN 1991-8178,
Veny, H. and Baroutian, S. and Aroua, M.K. and Hasan, M. and Abdul Raman, Abdul Aziz and Sulaiman, N.M.N. (2009) Density of jatropha curcas seed oil and its methyl esters: measurement and estimations. International Journal of Thermophysics, 30 (2). pp. 529-541. ISSN 0195-928X,
Wong, L.S. and Hashim, Roslan and Ali, F.H. (2009) A review on hydraulic conductivity and compressibility of peat. Journal of Applied Sciences, 9 (18). pp. 3207-3218. ISSN 18125654, DOI https://doi.org/10.3923/jas.2009.3207.3218.
Wong, Leong Sing and Hashim, Roslan and Ali, Faisal (2009) Unconfined compressive strength of cemented peat. Australian Journal of Basic and Applied Sciences, 3 (4). pp. 3850-3856. ISSN 1991-8178,
Wong, Leong Sing and Hashim, Roslan and Ali, Faisal (2009) A review on experimental investigations of peat stabilization. Australian Journal of Basic and Applied Sciences, 3 (4). pp. 3537-3552. ISSN 1991-8178,
Yahya, Samer and Mohamed, Haider A.F. and Moghavvemi, Mahmoud (2009) A geometrical motion planning approach for redundant planar manipulators. Australian Journal of Basic and Applied Sciences, 3 (4). pp. 3757-3770. ISSN 1991-8178,
Yasin, Moh and Harun, Sulaiman Wadi and Fawzi, W.A. and Kusminarto, - and Karyono, - and Ahmad, Harith (2009) Lateral and axial displacements measurement using fiber optic sensor based on beam-through technique. Microwave and Optical Technology Letters, 51 (9). pp. 2038-2040. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.24584.
Yasin, Moh and Harun, Sulaiman Wadi and Kusminarto, - and Karyono, - and Warsono, - and Zaidan, Andi H. and Ahmad, Harith (2009) Study of bundled fiber based displacement sensors using theoretical model and fitting function approaches. Journal of Optoelectronics and Advanced Materials, 11 (3). pp. 302-307. ISSN 1454-4164,
Yasin, Moh and Harun, Sulaiman Wadi and Kusminarto, - and Karyono, - and Zaidan, Andi H. and Thambiratnam, Kavintheran and Ahmad, Harith (2009) Design and Operation of a Concentric-Fiber Displacement Sensor. Fiber and Integrated Optics, 28 (4). pp. 301-309. ISSN 0146-8030, DOI https://doi.org/10.1080/01468030902842673.
Yasin, Moh and Harun, Sulaiman Wadi and Samian, - and Kusminarto, - and Ahmad, Harith (2009) Simple design of optical fiber displacement sensor using a multimode fiber coupler. Laser Physics, 19 (7). pp. 1446-1449. ISSN 1054-660X, DOI https://doi.org/10.1134/S1054660X09070123.
Yazdi, H.M. and Ramli Sulong, N.H. (2009) Eccentricity Optimization of NGB System by using Multi-Objective Genetic Algorithm. Journal of Applied Sciences, 9 (19). pp. 3502-3512. ISSN 1812-5654, DOI https://doi.org/10.3923/jas.2009.3502.3512.
Yin, C.Y. and Aroua, M.K. and Daud, W.M.A.W. (2009) Fixed-bed adsorption of metal ions from aqueous solution on polyethyleneimine-impregnated palm shell activated carbon. Chemical Engineering Journal, 148 (1). pp. 8-14. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2008.07.032.
Younis, M.A.A. and Rahim, N.A. and Mekhilef, Saad (2009) Distributed generation system using parallel inverters supplied by unstable DC source. Journal of Applied Sciences, 9 (11). pp. 2045-2055. ISSN 18125654, DOI https://doi.org/10.3923/jas.2009.2045.2055.
Younis, M.A.A. and Rahim, N.A. and Mekhilef, Saad (2009) Harmonic reduction in three-phase parallel connected inverter. World Academy of Science, Engineering and Technology, 38. pp. 1035-1040. ISSN 2010376X,
Zabeti, M. and Daud, W.M.A.W. and Aroua, M.K. (2009) Activity of solid catalysts for biodiesel production: A review. Fuel Processing Technology, 90 (6). pp. 770-777. ISSN 0378-3820, DOI https://doi.org/10.1016/j.fuproc.2009.03.010.
Zabeti, M. and Daud, Wan Mohd Ashri Wan and Aroua, Mohamed Kheireddine (2009) Optimization of the activity of CaO/Al2O3 catalyst for biodiesel production using response surface methodology. Applied Catalysis A: General, 366 (1). pp. 154-159. ISSN 0926-860X, DOI https://doi.org/10.1016/j.apcata.2009.06.047.
Zubir, Mohd Nashrul Mohd and Shirinzadeh, Bijan and Tian, Yanling (2009) A new design of piezoelectric driven compliant-based microgripper for micromanipulation. Mechanism and Machine Theory, 44 (12). pp. 2248-2264. ISSN 0094-114X, DOI https://doi.org/10.1016/j.mechmachtheory.2009.07.006.
Abdolrasol, M.G.M. and Mekhilef, Saad (2009) Hybrid anti-islanding algorithm for utility interconnection of distributed generation. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, Kuala Lumpur.
Abdul Kadir, M.N. and Mekhilef, Saad (2009) Eighteen-level inverter control with minimum switching losses. In: 2009 13th European Conference on Power Electronics and Applications, EPE '09, Barcelona.
Aboodarda, S.J. and Muhamed, A.M.C. and Ibrahim, F. and Hamid, M.S.B.A. (2009) Electromyographic activity using elastic resistance and nautilus machine exercises. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.
Adikan, Faisal Rafiq Mahamd and Ali, N.M. and Mokhtar, Norrima and Mubin, Marizan (2009) Recent Findings Pertaining To Factors Contributing To The Poor Academic Performance Of Undergraduate Students In The Department Of Electrical Engineering, University Of Malaya, Kuala Lumpur, Malaysia. In: International Engineering Education Conference, 16-19 May 2009, Madinah, Saudi Arabia. (Submitted)
Ahmad, N. and Taha, Z. and Ujihashi, S. and Tanaka, K. (2009) An experimental study of the impact of a sepak takraw ball on a flat surface. In: 4th Asia-Pacific Congress on Sports Technology 2009, 21-23 Sep 2009, Honolulu,Hawaii.
Ahmed, R.A. and Mekhilef, Saad and Ping, H.W. (2009) A three-Phase shunt active power filter with unified constant frequency integration control with RLC connection circuit. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009.
Al-maqtari, M.T. and Taha, Z. and Moghavvemi, M. (2009) Steady state-VEP based BCI for control gripping of a Robotic hand. In: International Conference for Technical Postgraduates, TECHPOS 2009, 14-15 December 2009, Kuala Lumpur, Malaysia.
Albaker, B.M. and Rahim, N.A. (2009) Intelligent conflict detection and awareness for UAVs. In: Conference on Innovative Technologies in Intelligent Systems and Industrial Applications, JUL 25-26, 2009, Kuala Lumpur.
Albaker, B.M. and Rahim, N.A. (2009) Straight projection conflict detection and cooperative avoidance for autonomous unmanned aircraft systems. In: 4th IEEE Conference on Industrial Electronics and Applications, MAY 25-27, 2009 , China.
Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) SMEs and virtual R&D teams: a motive channel for relationship between SMEs. In: The International Conference for Technical Postgraduates (TECHPOS 2009), 14-15 December, The Legend Hotel, Kuala Lumpur, Malaysia.
Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) SMEs: ERP or virtual collaboration teams. In: First Enterprise Resource Planning conference, January 27-28, Tehran, Iran.
Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) Virtual R&D teams: innovation and technology facilitator. In: Engineering Education in 2025, 11-12 May, School of Engineering and Technology, University of Tehran, Tehran, Iran.
Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) Virtual teams and management challenges. In: 1st Executive MBA Conference, 18-19, May, Tehran, Iran.
Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) Virtual teams for NPD – an innovative experience for R&D engineers. In: International Conference on Advances in Mechanical Engineering, 24-25, June, Concorde Hotel, Shah Alam, Malaysia.
Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) Virtuality, innovation and R&D activities. In: 14th International Conference on Thinking (2009 Malaysia) -Theme "Thinking Minds: Nurturing the Design of a Better Future", 22-26 June, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia.
Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) A conceptual model of virtual product development process. In: 2nd Seminar on Engineering and Information Technology, (SEIT 2009), 8th - 9th July, Universiti Malaysia Sabah, Kota Kinabalu, Sabah, Malaysia.
Amouzad Mahdiraji, G. and Malekmohammadi, A. and Fauzi Abas, A. and Khazani Abdullah, M. (2009) 40 Gbit/s on-off-keyed system with 5.71 GHz clock recovery circuit using duty cycle division multiplexing. In: 2009 Asia Communications and Photonics Conference and Exhibition, ACP 2009, 2009, Shanghai.
Ang, T.N. and Ngoh, G.C. and Chua, A.S.M. (2009) Pre-treatment of rice husks for fungal fermentation. In: CHEMECA Conference 2009, 27-30 Sept 2009, Perth, Australia.
Ar-Rawi, A.H. and Moghavvemi, M. and Wan-Ibrahim, W.M.A. (2009) Comparing between three current source circuits for using in bio electrical impedance design. In: International Conference for Technical Postgraduates, TECHPOS 2009, 14-15 December 2009, Kuala Lumpur, Malaysia.
Ar-Rawi, A.H. and Moghavvemi, M. and Wan-Ibrahim, W.M.A. (2009) Wide Band frequency fixed current source for BIT and BIA. In: World Congress on Medical Physics and Biomedical Engineering,Diagnostic Imaging , 7 -12 September 2009, Munich, Germany.
Askari, M. and Mohamed, H.A.F. and Moghavvemi, M. and Yang, S.S. (2009) Application of modified model predictive control to a gantry system. In: ICROS-SICE International Joint Conference 2009, ICCAS-SICE 2009, 18-21 August 2009, Fukuoka, Japan.
Askari, M. and Mohamed, H.A.F. and Moghavvemi, M. and Yang, S.S. (2009) Model predictive control of an inverted pendulum. In: International Conference for Technical Postgraduates, TECHPOS 2009, 14-15 December 2009, Kuala Lumpur, Malaysia.
Ayusoff, N. and Soin, N. and Abd Rahman, N. and Raja Abd Rahman, R.N.Z. and Abd Kahar, M.K.B. and Ibrahim, F. (2009) Binding characteristics study for dengue virus non-structural protein 1 of antigen and Its antibody by using circular dichroism technique. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.
Basir, S.M. and Mahdiraji, G.A. and Malekmohammadi, A. and Ibrahim, N.H. and Abas, A.F. and Abdullah, M.K. (2009) Demonstration of duty cycle division multiplexing with bit error rate estimation. In: Communications (MICC), 2009 IEEE 9th Malaysia International Conference on, 2009.
Ghafari, S. and Hasan, M. and Aroua, M.K. (2009) Denitrification of surface and ground water applying autohydrogenotrophic bacteria in a novel upflow bio-electrochemical reactor(UBER). In: CHEMECA Conference 2009, 27-30 Sept 2009, Perth, Australia.
Ghazali, N.N.N. and Yau, Y.H. and Badarudin, A. and Lim, Y.C. (2009) Computational fluid dynamics simulation of drag reduction by riblets on automobile. In: International Symposium on Computational Mechanics and 12th International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science, 29 Nov-3 Dec 2009, Macau, Hong Kong.
Gheitasi, A. and Moghavvemi, M. and Omar, R. (2009) Automatic protection system for slow rate events in power systems. In: 2009 IEEE Student Conference on Research and Development, SCOReD 2009, 16-18 November 2009, Serdang, Malaysia.
Gheitasi, A. and Moghavvemi, M. and Omar , R. (2009) Speed variant motor fault diagnosis applying significant frequency bands. In: 2009 IEEE Student Conference on Research and Development, SCOReD 2009, 16-18 November 2009, Serdang, Malaysia.
Goh, Y.H. and Paramesran, Raveendran (2009) HMM-Based speech recognition using adaptive framing. In: IEEE Region 10 Conference 2009, NOV 23-26, 2009 , Singapore.
Guellal, M. and Touabti, A. and Abdesselam, H. (2009) A parametric study of convective heat transfer on LNG tank by numerical simulations. In: Proceedings of the Fourth International Conference on Thermal Engineering: Theory and Applications, 12-14 Jan 2009, Dubai, UAE. (Submitted)
Hartomo, - and Taha, Z. and Hastutiningsih, E.D. (2009) Analysis of ergonomics workstation layout design using analytical hierarchy process. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)
Hashim, M.A. and Mjalli, F.S. and Hayyan, M. and Al-Nashef, I.M. (2009) Application of low cost ionic liquids for the separation of glycerine from palm oil-based biodiesel. In: CHEMECA Conference 2009, 27-30 Sept 2009, Perth, Australia.
Hasikin, K. and Soin, N. and Ibrahim, F. (2009) Modeling an optical diaphragm for human pulse pressure detection. In: Advances in Microelectronics, Nanoelectronics and Optoelectronics, 30 May-1 June 2009, Istanbul, Turkey. (Submitted)
Hasikin, K. and Soin, N. and Ibrahim, F. (2009) Modeling of a polyimide diaphragm for an optical pulse pressure sensor. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.
Hassan, L.H. and Moghavvemi, M. and Mohamed, H.A.F. (2009) Dynamic stability assessment of the Iraqi power system network. In: International Conference for Technical Postgraduates, TECHPOS 2009, 14-15 December 2009, Kuala Lumpur, Malaysia.
Hassan, L.H. and Moghavvemi, M. and Mohamed, H.A.F. (2009) Power system stabilization based on artificial intelligent techniques: a review. In: International Conference for Technical Postgraduates, TECHPOS 2009, 14-15 December 2009, Kuala Lumpur, Malaysia.
Hassan, L.H. and Mohamed, H.A.F. and Moghavvemi, M. and Yang, S.S. (2009) Load frequency control of power systems with Sugeno fuzzy gain scheduling PID controller. In: ICROS-SICE International Joint Conference 2009, ICCAS-SICE 2009, 18-21 August 2009, Fukuoka, Japan.
Husnawan, M. and Masjuki, Haji Hassan and Mahlia, Teuku Meurah Indra and Saidur, Rahman and Kalam, Md. Abul (2009) Performance and emissions characterization of diesel engine running with re-formulated palm oil methyl ester-diesel blended fuel. In: Proceedings of the Fourth International Conference on Thermal Engineering: Theory and Applications, 12-14 Jan 2009, Abu Dhabi, UAE. (Submitted)
Hussain, Mohd Azlan and Aroua, Mohamed Kheireddine and Lim, J.S. (2009) Control of a hydrolyzer using neural-network based controller. In: CHEMECA Conference 2009, 27-30 Sept 2009, Perth, Australia.
Jafar, N. and Soin, N. (2009) Analog and short channel effects performance of sub-100 nm graded channel fully depleted silicon on insulator (SOI). In: Advances in Microelectronics, Nanoelectronics and Optoelectronics, 30 May-1 June 2009, Istanbul, Turkey. (Submitted)
Kadir, M.N.A. and Mekhilef, Saad and Ping, H.W. (2009) Novel control strategy for three-stage 18-level hybrid multilevel inverter. In: Systems, Signals and Devices, 2009. SSD'09. 6th International Multi-Conference on.
Kamali, S.K. and Mekhilef, Saad (2009) Evaluation study on grid-connected PV system at University of Malaya. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, Kuala Lumpur.
Karim, M.R. and Gnanendran, C.T. (2009) Settlement analysis of foundation soil over a long time and comparison with field performance. In: 17th International Conference on Soil Mechanics and Geotechnical Engineering, ICSMGE 2009, 2009, Alexandria.
Khalil, M. and Mohamed Jan, B. and Abdul Raman, Abdul Aziz (2009) The effect of clay in the formulation of non-traditional completion fluid for underbalance perforation. In: CHEMECA Conference 2009, 27-30 Sept 2009, Perth, Australia.
Masjuki, Haji Hassan and Kalam, Md. Abul and Ishak, A. and Khair, M. and Shahrir, A. and Yusof, A. (2009) Experimental test of a new dedicated natural gas engine. In: International Engineering Convention, 11-14 May 2009, Damascus, Syria. (Submitted)
Masjuki, Haji Hassan and Sattar, M.A. and Mahlia, Teuku Meurah Indra and Kalam, Md. Abul and Husnawan, M. and Saidur, Rahman (2009) Significance of journal paper publication and guideline in postgraduate study. In: International Engineering Education Conference 2009, 16-19 May 2009, Madinah, Saudi Arabia.
Md Dawal, Siti Zawiah and Taha, Z. (2009) Job satisfaction model for manufacturing industry: focus on ergonomics and human factors in work design. In: IEEE Toronto International Conference on Science and Technology for Humanity, SEP 26-27, 2009 , Toronto.
Mekhilef, Saad and Chard, T.R. and Ramachandramurthy, V.K. (2009) Voltage rise due to inter-connection of embedded generators to distribution network on weak feeder. In: 2009 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2009, Kuala Lumpur.
Mekhilef, Saad and Hassani, M. and Mehbodniya, A. and Tebianian, H. (2009) Design and implementation of a level detector. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009.
Mohamed, H.A.F. and Yahya, S. and Moghavvemi, M. and Yang, S.S. (2009) A new inverse kinematics method for three dimensional redundant manipulators. In: ICROS-SICE International Joint Conference 2009, ICCAS-SICE 2009, 18-21 August 2009, Fukuoka, Japan.
Mohamed, H.A.F. and Yang, S.S. and Moghavvemi, M. (2009) Improving induction motors speed and flux control using Fuzzy-SMC-PI. In: 2009 IEEE International Conference on Industrial Technology, ICIT 2009, 10-13 February 2009, Churchill, VIC, Australia.
Mohamed, H.A.F. and Yang, S.S. and Moghavvemi, M. (2009) Sensorless fuzzy SMC for a permanent magnet synchronous motor. In: ICROS-SICE International Joint Conference 2009, ICCAS-SICE 2009, 18-21 August 2009, Fukuoka, Japan.
Mohamed, H.A.F. and Yang, S.S. and Moghavvemi, M. (2009) Sliding mode controller design for a flying quadrotor with simplified action planner. In: ICROS-SICE International Joint Conference 2009, ICCAS-SICE 2009, 18-21 August 2009, Fukuoka, Japan.
Nur, N.M. and Md Dawal, Siti Zawiah (2009) Upper limb and lower back muscle activity during prolonged sitting. In: IEEE Toronto International Conference on Science and Technology for Humanity, SEP 26-27, 2009 , Toronto.
Ong, Y.H. and Lee, B.P. and Chua, A.S.M. and Ngoh, G.C. (2009) Establishment of enhanced biological phosphorus removal process by using seed sludge from a conventional activated sludge process. In: CHEMECA Conference 2009, 27-30 Sept 2009, Perth, Australia.
Peyman, J. and Akbar Nozari, A. and Soin, N. and Ibrahim, F. (2009) Evaluation of pressure changes for capillary and fishbone valves in Lab-on-CD systems. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.
Raja Ghazilla, R.A. and Taha, Z. (2009) Development of a framework for disassemblability design optimization for sustainable manufacturing. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)
Ramli, R. and Mokhtar, Norrima and Arof, Hamzah and Mohd Anwar, M.S. and Meor Hamzah, N.H. and Ibrahim, Fatimah (2009) Development of brain signal processing interface software for Trackit-LabVIEW. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.
Ranville, J.F. and Sibrell, P.L. and Wildeman, T.R. and Lee, B.T. and Jang, M. and Shim, Y.S. and Ji, W.H. and Park, H.S. and Lee, H.J. (2009) Assessment for treatment options at the Young Dong Coal Mine site, South Korea. In: Joint Conference of 26th Annual Meetings of the American Society of Mining and Reclamation and 11th Billings Land Reclamation Symposium 2009, 2009, Billings, MT.
Rashid, M.M. and Hussain, Mohd Azlan and Raisuddin Khan, M. (2009) Development of hybrid controller of wheeled robot for mine detection. In: 2009 International Conference on Mechanical and Electrical Technology, ICMET'09, 2009, Beijing.
Raza, R.G. and Mohd, H.I. (2009) Ceramic lined steel pipe production using SHS method. In: AUN/SEED Net 1st regional Conference on Materials RCM2009 Materials: Leading the Path of Engineers, USM, Penang, Malaysia, 2009, 16,17 Feb 2009, Penang, Malaysia.
Saidur, R. and Husnawan, M. and Masjuki, Haji Hassan and Jahirul, M.I. and Mahlia, T.M.I. and Nasruddin, A.R. and Mekhilef, Saad and Ping, H.W. and Zamaluddin, M.F. (2009) Energy and electricity consumption analysis of Malaysian industrial sector. In: Proceedings of the Fourth International Conference on Thermal Engineering: Theory and Applications, 12-14 Jan 2009, Dubai, UAE. (Submitted)
Saidur, Rahman and Hasanuzzaman, M. (2009) Energy and environmental analysis of electrical motor in industrial boilers. In: 2009 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability, ICEE 2009, 2009, Malacca.
Salleh, N.A. and Lim, K.S. and Ibrahim, F. (2009) AR modeling as EEG spectral analysis on prostration. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.
Taha, Z. and Muhammad, M.Z. (2009) Evaluation of corporate initiatives in ergonomics: Effectiveness of ergonomics training in an oil and gas refinery company. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)
Taha, Z. and Sakundarini, N. and Raja Ghazilla, R.A. and Gonzalez, J. (2009) An intelligent approach to recyclability evaluation in automobile design. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)
Taha, Z. and Yap, H.J. and Raja Ghazilla, R.A. and Ahmad, N. (2009) The ergonomics virtual reality station design (ErgoVR). In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)
Touabti, M.C.A. and Guellal, M. and Abdesselam, H. (2009) Dynamic and thermal behaviour study of a complex network of gas pipeline in transient flow. In: Proceedings of the Fourth International Conference on Thermal Engineering: Theory and Applications, 12-14 Jan 2009, Dubai, UAE. (Submitted)
Tukimin, R. and Wan Mahadi, W.N.L. and M Ali, M.Y. and M Thari, M.N. (2009) Public awareness on electromagnetic field in Malaysia. In: International Engineering Convention, 11-14 May 2009, Damascus, Syria.. (Submitted)
Wahab, Ahmad Khairi Abdul and Hussain, M.A. and Omar, R. (2009) Development of partially simulated chemical reactor for the implementation of advanced control systems. In: CHEMECA Conference 2009, 27-30 Sept 2009, Perth, Australia.
Wahab, Ahmad Khairi Abdul and Hussain, Mohd Azlan and Omar, Rosli (2009) Fuzzy logic controller for a partially simulated chemical reactor system. In: 2nd Regional Conference on Chemical Engineering, 23-24 October 2009, Ho Chi Minh City, Vietnam.
Wazed, M.A. and Ahmed, S. and Yusoff, N. (2009) Component commonality in multistage production system: Models with capacity constraints. In: 3rd International Engineering Convention 2009, 11-14 May 2009, Damascus, Syria..
Yahya, S. and Mohamed, H.A.F. and Moghavvemi, M. and Yang, S.S. (2009) Inverse kinematics of an equal length links planar hyper redundant manipulator using neural networks. In: ICROS-SICE International Joint Conference 2009, ICCAS-SICE 2009, 18-21 August 2009, Fukuoka, Japan.
Yahya, S. and Mohamed, H.A.F. and Moghavvemi, M. and Yang, S.S. (2009) Motion planning of hyper redundant manipulators based on a new geometrical method. In: 2009 IEEE International Conference on Industrial Technology, ICIT 2009, 10-13 February 2009, Churchill, VIC, Australia.
Yang, S.S. and Mohamed, H.A.F. and Moghavvemi, M. and Ng, P.H. (2009) Real-time model based sensor fault tolerant control system on a chip. In: ICROS-SICE International Joint Conference 2009, ICCAS-SICE 2009, 18-21 August 2009, Fukuoka, Japan.
Yap, H.J. and Taha, Z. and Eng, T.H. and Chew, J.Y. (2009) Design and development of a marker-based augmented reality system using OpenCV and OpenGL. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)
Yap, Hwa Jen and Taha, Zahari and Ng, Sock Wee and Chew, Jouh Yeong (2009) Low cost head tracking system for a desktop-based VR system using webcam. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 December 2009, Kitakyushu, Japan. (Submitted)
Yau, Y.H. and Ghazali, N.N.N. and Badarudin, A. and Goh, F.C. (2009) CFD simulation on the thermal comfort in a library building in the tropics. In: International Symposium on Computational Mechanics and 12th International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science, 29 Nov-3 Dec 2009, Macau, Hong Kong. (Submitted)
Yau, Y.H. and Lim, C.B. (2009) The use of heat recovery devices for reducing energy consumption of treating ventilation air in a tropical operating theatre. In: 5th International Workshop on Energy and Environment of Resident Buildings & 3rd International Conference on Built Environment and Public Helath, 29-31 May 2009, Guilin, China.
Younis, U.A.A. and Rahirn, N.A. and Mekhilef, Saad (2009) Distributed generation with parallel connected inverter. In: 2009 4th IEEE Conference on Industrial Electronics and Applications, ICIEA 2009, Xi'an.
Yusoff, N.A. and Soin, N. and Ibrahim, F. (2009) Lab-on-a-disk as a potential microfluidic platform for dengue NS1-ELISA. In: 2009 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2009, 2009, Kuala Lumpur.
Yusuf, K. and Edi, P. and Radzi, A. and Ghani, A. (2009) Shape reconstruction of specular surface using normal vectors. In: 2nd WSEAS International Conference on Engineering Mechanics, Structures and Engineering Geology, JUL 22-24, 2009 , Rhodes, GREECE.
Zadry, H.R. and Md Dawal, Siti Zawiah and Taha, Z. (2009) Investigation of upper limb muscle activity during repetitive light task using surface electromyography (SEMG). In: IEEE Toronto International Conference on Science and Technology for Humanity, SEP 26-27, 2009 , Toronto.
Mahmoodian, R. (2009) Development of a test rig for ceramic-lined steel pipes production by self-propagating high-temperature synthesis (SHS). Masters thesis, University of Malaya.
