 | Up a level |
Abd Aziz, N.A. and Ibrahim, Z. and Nawawi, S.W. and Sudin, S. and Mubin, M. and Abd Aziz, K. (2014) Synchronous gravitational search algorithm vs asynchronous gravitational search algorithm: a statistical analysis. In: 13th International Conference on Intelligent Software Methodologies, Tools, and Techniques, 22-24 Sep 2014, Langkawi, Malaysia.
Abd Razak, N.A. and Abu Osman, Noor Azuan and Kamyab, M. and Wan Abas, W.A.B. and Gholizadeh, H. (2014) Satisfaction and problems experienced with wrist movements: comparison between a common body-powered prosthesis and a new biomechatronics prosthesis. American Journal of Physical Medicine & Rehabilitation. ISSN 0894-9115, DOI https://doi.org/10.1097/PHM.0b013e3182a51fc2.
Abdullah, M.N. and Bakar, Ab Halim Abu and Rahim, N.A. and Mokhlis, Hazlie and Illias, Hazlee Azil and Jamian, J.J. (2014) Modified Particle Swarm Optimization with Time Varying Acceleration Coefficients for Economic Load Dispatch with Generator Constraints. Journal of Electrical Engineering & Technology, 9 (1). pp. 15-26. ISSN 1975-0102,
Abedin, M.J. and Masjuki, Haji Hassan and Kalam, M.A. and Varman, Mahendra and Arbab, M.I. and Rizwanul Fattah, I.M. and Masum, B.M. (2014) Experimental investigation of a multicylinder unmodified diesel engine performance, emission, and heat loss characteristics using different biodiesel blends: Rollout of B10 in Malaysia. Scientific World Journal, 2014. p. 349858. ISSN 2356-6140, DOI https://doi.org/10.1155/2014/349858.
Afrasiab, M. and Faraji, G. and Tavakkoli, V. and Mashhadi, M.M. and Bushroa, Abdul Razak (2014) Excellent energy absorption capacity of nanostructured Cu–Zn thin-walled tube. Materials Science and Engineering: A, 599. pp. 141-144. ISSN 0921-5093, DOI https://doi.org/10.1016/j.msea.2014.01.081.
Afshar-Mohajer, M. and Yaghoubi, A. and Ramesh, S. and Bushroa, A.R. and Chin, K.M.C. and Tin, C.C. and Chiu, W.S. (2014) Electrophoretic deposition of magnesium silicates on titanium implants: Ion migration and silicide interfaces. Applied Surface Science, 301. pp. 1-6. ISSN 0169-4332, DOI https://doi.org/10.1016/j.apsusc.2014.04.033.
Ahirwal, M.K. and Kumar, A. and Singh, G.K. (2014) Adaptive filtering of EEG/ERP through bounded range artificial Bee Colony (BR-ABC) algorithm. Digital Signal Processing, 25. pp. 164-172. ISSN 1051-2004,
Ahirwal, M.K. and Kumar, A. and Singh, G.K. (2014) A new approach for utilisation of single ERP to control multiple commands in BCI. International Journal of Electronics Letters. ISSN 2168-1724,
Ahmad, F. and Harun, Sulaiman Wadi and Nor, Roslan Md and Zulkepely, N.R. and Muhammad, F.D. and Arof, Hamzah and Ahmad, Harith (2014) Mode-locked soliton erbium-doped fiber laser using a single-walled carbon nanotubes embedded in polyethylene oxide thin film saturable absorber. Journal of Modern Optics, 61 (6). pp. 541-545. ISSN 0950-0340, DOI https://doi.org/10.1080/09500340.2014.899644.
Akbari, M. and Reza, A.W. and Noordin, K.A. and Manesh, M.R. and Hindia, M.N. (2014) Summary of best efficient algorithms on cognitive radio cooperative spectrum sensing to improve QoS. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.
Al-Masoodi, A.H.H. and Ismail, M.F. and Ahmad, F. and Kasim, N. and Munajat, Y. and Ahmad, Harith and Harun, Sulaiman Wadi (2014) Q-switched Yb-doped fiber laser operating at 1073 nm using a carbon nanotubes saturable absorber. Microwave and Optical Technology Letters, 56 (8). pp. 1770-1773. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.28447.
Alam, M. and Choudhury, I.A. and Azuddin, M. (2014) Mechanism and Design Analysis of Articulated Ankle Foot Orthoses for Drop-Foot. Scientific World Journal, 2014. pp. 1-14. ISSN 2356-6140, DOI https://doi.org/10.1155/2014/867869.
Ale Ebrahim, N. and Salehi, H. and Embi, M.A. and Danaee, M. and Mohammadjafari, M. and Zavvari, A. and Shakiba, M. and Shahbazi-Moghadam, M. (2014) Equality of Google scholar with web of science citations: case of Malaysian engineering highly cited papers. Modern Applied Science, 8 (5). pp. 63-69. ISSN 1913-1844, DOI https://doi.org/10.5539/mas.v8n5p63.
Ale Ebrahim, N. and Salehi, H. and Embi, M.A. and Habibi Tanha, F. and Gholizadeh, H. and Motahar, S.M. (2014) Visibility and citation impact. International Education Studies, 7 (4). pp. 120-125. ISSN 1913-9039 (Online), DOI https://doi.org/10.5539/ies.v7n4p120 .
Ali, M.S. and Bakar, Ab Halim Abu and Mokhlis, Hazlie and Arof, Hamzah and Illias, Hazlee Azil (2014) High-impedance fault location using matching technique and wavelet transform for underground cable distribution network. IEEJ Transactions on Electrical and Electronic Engineering, 9 (2). pp. 176-182. ISSN 1931-4973, DOI https://doi.org/10.1002/tee.21953.
Aman, M.M. and Jasmon, G.B. and Bakar, A.H.A. and Mokhlis, Hazlie (2014) Optimum network reconfiguration based on maximization of system loadability using continuation power flow theorem. International Journal of Electrical Power & Energy Systems, 54. pp. 123-133. ISSN 0142-0615, DOI https://doi.org/10.1016/j.ijepes.2013.06.026.
Aman, M.M. and Jasmon, G.B. and Bakar, Ab Halim Abu and Mokhlis, Hazlie (2014) A new approach for optimum simultaneous multi-DG distributed generation Units placement and sizing based on maximization of system loadability using HPSO (hybrid particle swarm optimization) algorithm. Energy, 66. pp. 202-215. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2013.12.037.
Aman, M.M. and Jasmon, G.B. and Bakar, Ab Halim Abu and Mokhlis, Hazlie and Karimi, M. (2014) Optimum shunt capacitor placement in distribution system—A review and comparative study. Renewable and Sustainable Energy Reviews, 30. pp. 429-439. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2013.10.002.
Ang, B.C. and Yaacob, I.I. and Wong, Y.H. (2014) Phase and surface area studies of maghemite nanoparticles dispersed in silica gel. Materials Research Innovations, 18 (S6). S6-32-S6-35. ISSN 1432-8917, DOI https://doi.org/10.1179/1432891714Z.000000000927.
Ashrafur Rahman, S.M. and Masjuki, Haji Hassan and Kalam, M.A. and Varman, Mahendra and Sanjid, A. and Abedin, M.J. (2014) Assessing effect of idling on compression ignition engine operated with palm, jatropha and calophyllum biodiesel blends. Journal of the Institute of Industrial Applications Engineers, 2 (3). pp. 122-126. ISSN 2187-8811,
Attaran, A. and Emami, S.D. and Soltanian, M.R.K. and Penny, R. and Behbahani, F. and Harun, Sulaiman Wadi and Ahmad, Harith and Abdul-Rashid, H.A. and Moghavvemi, Mahmoud (2014) Circuit Model of Fano Resonance on Tetramers, Pentamers, and Broken Symmetry Pentamers. Plasmonics, 9 (6). pp. 1303-1313. ISSN 1557-1955, DOI https://doi.org/10.1007/s11468-014-9743-y.
Aziz, A. and Yau, Y.H. and Puma, G.L. and Fischer, C. and Ibrahim, S. and Pichiah, S. (2014) Highly efficient magnetically separable TiO2-graphene oxide supported SrFe12O19 for direct sunlight-driven photoactivity. Chemical Engineering Journal, 235. pp. 264-274. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2013.09.043.
Azooz, S.M. and Hamida, B.A. and Khan, S. and Eltaif, T. and Jasim, A.A. and Ahmad, Harith and Harun, Sulaiman Wadi (2014) Аll-fibre dual-wavelength thulium-doped fibre laser based on spatial filtering effect. Ukrainian Journal of Physical Optics, 15 (2). pp. 79-83. ISSN 1609-1833, DOI https://doi.org/10.3116/16091833/15/2/79/2014.
Bakar, A.H.A. and Khan, S.A. and Tan, C.K. and Rahim, N.A. (2014) A review of ferroresonance in capacitive voltage transformer. IEEJ Transactions on Electrical and Electronic Engineering, 10 (1). pp. 28-35. ISSN 1931-4973, DOI https://doi.org/10.1002/tee.22074.
Bakar, Ab Halim Abu and Ali, M.S. and Tan, Chia Kwang and Mokhlis, Hazlie and Arof, Hamzah (2014) High impedance fault location in 11 kV underground distribution systems using wavelet transforms. International Journal of Electrical Power & Energy Systems, 55. pp. 723-730. ISSN 0142-0615, DOI https://doi.org/10.1016/j.ijepes.2013.10.003.
Bakar, Ab Halim Abu and Ooi, B.J. and Tan, Chia Kwang and Illias, Hazlee Azil and Mokhlis, Hazlie (2014) Directional overcurrent and earth-fault protections for a biomass microgrid system in Malaysia. International Journal of Electrical Power & Energy Systems, 55. pp. 581-591. ISSN 0142-0615, DOI https://doi.org/10.1016/j.ijepes.2013.10.004.
Bakhtiyari, K. and Salehi, H. and Embi, M.A. and Shakiba, M. and Zavvari, A. and Shahbazi-Moghadam, M. and Ale Ebrahim, N. and Mohammadjafari, M. (2014) Ethical and unethical methods of plagiarism prevention in academic writing. International Education Studies, 7 (7). pp. 52-62. ISSN 1913-9020, DOI https://doi.org/10.5539/ies.v7n7p52.
Bang, L.T. and Long, B.D. and Othman, R. (2014) Carbonate Hydroxyapatite and Silicon-Substituted Carbonate Hydroxyapatite: Synthesis, Mechanical Properties, and Solubility Evaluations. Scientific World Journal, 2014. pp. 1-9. ISSN 2356-6140, DOI https://doi.org/10.1155/2014/969876.
Barman, S.D. and Reza, A.W. and Kumar, N. (2014) Efficiency maximization of resonant coupled wireless power transfer system via impedance matching based on coupling tuning. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.
Batumalay, M. and Rahman, H.A. and Kam, W. and Ong, Y.S. and Ahmad, F. and Zakaria, Rozalina and Harun, Sulaiman Wadi and Ahmad, Harith (2014) Evaluation of the tapered PMMA fiber sensor response due to the ionic interaction within electrolytic solutions. Journal of Modern Optics, 61 (2). pp. 154-160. ISSN 0950-0340, DOI https://doi.org/10.1080/09500340.2013.850541.
Batumalay, Malathy and Ahmad, F. and Lokman, A. and Jasim, Ali Abdulhadi and Harun, Sulaiman Wadi and Ahmad, Harith (2014) Tapered plastic optical fiber coated with single wall carbon nanotubes polyethylene oxide composite for measurement of uric acid concentration. Sensor Review, 34 (1). pp. 75-79. ISSN 0260-2288, DOI https://doi.org/10.1108/SR-09-2012-699.
Beniddir, M.A.A. and Le Borgne, E.A. and Iorga, B.L.A. and Loaëc, N.B.C. and Lozach, O.B. and Meijer, L.B.C. and Awang, K.D. and Litaudon, M.A. (2014) Acridone alkaloids from Glycosmis chlorosperma as DYRK1A inhibitors. Journal of Natural Products, 77 (5). pp. 1117-1122. ISSN 15206025, DOI https://doi.org/10.1021/np400856h.
Bhandari, A.K. and Singh, V.K, and Kumar, A. and Singh, G.K. (2014) Cuckoo search algorithm and wind driven optimization based study of satellite image segmentation for multilevel thresholding using Kapur’s entropy. Expert Systems with Applications (41). pp. 3538-3560. ISSN 0957-4174,
Bhandari, A.K. and Soni, V. and Kumar, A. and Singh, G.K. (2014) Artificial Bee Colony-based satellite image contrast and brightness enhancement technique using DWT-SVD. International Journal of Remote Sensing, 35 (5). pp. 1601-1624. ISSN 0143-1161,
Che Sulaiman, N.S. (2014) Pulsed laser ablation of CU2ZNSNS4. In: 22th Annual International Conference on Composite/Nano Engineering, 13-19 July 2014, Saint Julian's, Malta.
Chew, W.J. and Ramesh, S. and Wong, Y.H. and Misran, H. and Yusuf, F. and Tan, C.Y. and Amiriyan, M. and Tolouei, R. and Teng, W.D. (2014) Sintering properties of zirconia-based ceramic composite. Materials Research Innovations, 18 (S6). S6-105-S6-108. ISSN 1432-8917, DOI https://doi.org/10.1179/1432891714Z.000000000939.
Ching, K.S. and Ching, Yern Chee and Ng, C.A. and Ishenny, N. and Beg, M.T.H. (2014) Effect of polyurethane/nanosilica composite coating on water resistance of paper substrate. Materials Research Innovations, 18 (S6). pp. 368-371. ISSN 1432-8917, DOI https://doi.org/10.1179/1432891714Z.0000000001009.
Ching, K.S. and Ealid, M. and Ching, Yern Chee and Haniff, M. and Khalid, M. and Beg, M.T.H. (2014) Preparation and characterisation of polyvinyl alcohol/oil palm empty fruit bunch fibre composite. Materials Research Innovations, 18 (S6). pp. 364-367. ISSN 1432-8917, DOI https://doi.org/10.1179/1432891714Z.0000000001008.
Cui, M. and Jang, M. and Ibrahim, S. and Park, B. and Cho, E. and Khim, J. (2014) Arsenite removal using a pilot system of ultrasound and ultraviolet followed by microfiltration. Ultrasonics Sonochemistry, 21 (4). pp. 1527-1534. ISSN 1350-4177, DOI https://doi.org/10.1016/j.ultsonch.2014.01.001.
Dahalan, W.M. and Mokhlis, Hazlie and Ahmad, R. and Bakar, Ab Halim Abu and Musirin, I. (2014) Simultaneous Network Reconfiguration and DG Sizing Using Evolutionary Programming and Genetic Algorithm to Minimize Power Losses. Arabian Journal for Science and Engineering, 39 (8). pp. 6327-6338. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-014-1299-9.
El-Sayed, Amr M. and Hamzaid, Nur Azah and Abu Osman, Noor Azuan (2014) Piezoelectric bimorphs' characteristics as in-socket sensors for transfemoral amputees. Sensors, 14 (12). pp. 23724-23741. ISSN 1424-8220, DOI https://doi.org/10.3390/s141223724.
Emami, S.D. and Muhammad, A.R. and Muhamad-Yasin, S.Z. and Mat-Sharif, K.A. and Zulkifli, M.I. and Adikan, Faisal Rafiq Mahamd and Ahmad, Harith and Abdul-Rashid, H.A. (2014) S-Band Gain Improvement Using a Thulium–Aluminum Co-Doped Photonic Crystal Fiber Amplifier. IEEE Photonics Journal, 6 (6). ISSN 1943-0655, DOI https://doi.org/10.1109/JPHOT.2014.2366158 .
Eryanti, Y.A.B. and Herlina, T.A. and Zamri, A.B. and Abdul Halim, S.N.C. and Shiono, Y.D. and Syah, Y.M.E. and Awang, K.C. and Supratman, U.A. (2014) 3,5-Bis(2-hydroxybenzylidene)piperidin-4-one. MolBank, 2014 (2). ISSN 14228599,
Estigoni, Eduardo H. and Fornusek, Che and Hamzaid, Nur Azah and Hasnan, Nazirah and Smith, Richard M. and Davis, Glen M. (2014) Evoked EMG versus muscle torque during fatiguing functional electrical stimulation-evoked muscle contractions and short-term recovery in individuals with spinal cord injury. Sensors, 14 (12). pp. 22907-22920. ISSN 1424-8220, DOI https://doi.org/10.3390/s141222907.
Fallahpour, A. and Olugu, E.U. and Musa, S.N. and Khezrimotlagh, D. and Singh, S. (2014) Supplier selection under fuzzy environment: A hybrid model using kam in DEA. In: Proceedings of the 12th International Conference of DEA, 14-17 Apr 2014, Kuala Lumpur.
Faraji, G. and Ebrahimi, M. and Bushroa, Abdul Razak (2014) Ultrasonic assisted tubular channel angular pressing process. Materials Science and Engineering: A, 599. pp. 10-15. ISSN 0921-5093, DOI https://doi.org/10.1016/j.msea.2014.01.069.
Faridah, O. and Alaa Eldin, M.E. (2014) Linking the water quality model with the real-time map and ambient phenomena. In: International Conference on Innovative Trends in Multidisciplinary Academic Research, 20 – 21 October 2014, Istanbul, Turkey.
Fattah, I.M.R. and Masjuki, Haji Hassan and Kalam, M.A. and Masum, B.M. (2014) Effect of synthetic antioxidants on storage stability of calophyllum inophyllum biodiesel. Materials Research Innovations, 18 (S6). pp. 90-94. ISSN 1432-8917, DOI https://doi.org/10.1179/1432891714Z.000000000936.
Gholizadeh, H. and Abu Osman, Noor Azuan and Eshraghi, A. and Ali, S. and Arifin, N. and Wan Abas, Wan Abu Bakar (2014) Evaluation of new suspension system for limb prosthetics. BioMedical Engineering OnLine, 13 (1). pp. 1-13. ISSN 1475-925X, DOI https://doi.org/10.1186/1475-925X-13-1.
Gholizadeh, H. and Salehi, H. and Embi, M.A. and Danaee, M. and Motahar, S.M. and Ale Ebrahim, N. and Tanha, F.H. and Abu Osman, Noor Azuan (2014) Relationship among economic growth, internet usage and publication productivity: comparison among ASEAN and world's best countries. Modern Applied Science, 8 (2). pp. 160-170. ISSN 1913-1852, DOI https://doi.org/10.5539/mas.v8n2p160.
Hassan, L.H. and Moghavvemi, M. and Almurib, H.A.F. and Muttaqi, K.M. and Ganapathy, V.G. (2014) Optimization of power system stabilizers using participation factor and genetic algorithm. International Journal of Electrical Power & Energy Systems, 55. pp. 668-679. ISSN 0142-0615, DOI https://doi.org/10.1016/j.ijepes.2013.10.026.
Hassan, Mohamed Mohsen Abdel-Naeim and Naderi, Sadjad and Bushroa, Abdul Razak (2014) Low-velocity impact damage of woven fabric composites: Finite element simulation and experimental verification. Materials & Design, 53. pp. 706-718. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2013.07.068.
Hindia, M.N. and Reza, A.W. and Dakkak, O. and Awang Nor, S. and Noordin, K.A. (2014) Cloud computing applications and platforms: a survey. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.
Hisyam, H.K. and Mahdiraji, G.A. and Abas, A.F. and Mahdi, M.A. and Adikan, Faisal Rafiq Mahamd (2014) Linewidth optimization in fiber grating Fabry–Perot laser. Optical Engineering, 53 (2). 026107. ISSN 0091-3286, DOI https://doi.org/10.1117/1.OE.53.2.026107.
Ibitoye, Morufu Olusola and Hamzaid, Nur Azah and Zuniga, Jorge M. and Hasnan, Nazirah and Wahab, Ahmad Khairi Abdul (2014) Mechanomyographic parameter extraction methods: An appraisal for clinical applications. Sensors, 14 (12). pp. 22940-22970. ISSN 1424-8220, DOI https://doi.org/10.3390/s141222940.
Ikhsan, N. and Ramli, R. and Alias, A. (2014) Analysis of kinematic and compliance of passive suspension system using Adams car. In: International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) 2014, 26-27 Aug 2014, Kuantan, Pahang.
Illias, Hazlee Azil and Tunio, M.A. and Bakar, Ab Halim Abu and Mokhlis, Hazlie and Chen, G. (2014) Partial discharge behaviours within a void-dielectric system under square waveform applied voltage stress. IET Science, Measurement & Technology, 8 (2). pp. 81-88. ISSN 1751-8822, DOI https://doi.org/10.1049/iet-smt.2013.0018.
Imtenan, S. and Masjuki, Haji Hassan and Varman, Mahendra and Arbab, M.I. and Sajjad, H. and Fattah, I.M.R. and Abedin, M.J. and Hasib, Abu Saeed Md. (2014) Emission and performance improvement analysis of biodiesel-diesel blends with additives. Procedia Engineering, 90. 472 - 477. ISSN 1877-7058, DOI https://doi.org/10.1016/j.proeng.2014.11.759.
Ismail, M.A. and Ahmad, Harith and Harun, Sulaiman Wadi (2014) Soliton Mode-Locked Erbium-Doped Fiber Laser Using Non-Conductive Graphene Oxide Paper. IEEE Journal of Quantum Electronics, 50 (2). pp. 85-87. ISSN 0018-9197, DOI https://doi.org/10.1109/JQE.2013.2295199 .
Jafar, N. and Soin, N. (2014) Analog and short channel effects performance of Sub-100 nm graded channel fully depleted silicon on insulator (SOI). In: WSEAS International Conference on Microelectronics, Nanoelectronics, Optoelectronics, May 30 - June 1 2009, Istanbul, Turkey. (Submitted)
Jamian, J.J. and Abdullah, M.N. and Mokhlis, Hazlie and Mustafa, M.W. and Bakar, Ab Halim Abu (2014) Global Particle Swarm Optimization for High Dimension Numerical Functions Analysis. Journal of Applied Mathematics, 2014. pp. 1-14. ISSN 1110-757X, DOI https://doi.org/10.1155/2014/329193.
Jusoh, Z. and Harun, Sulaiman Wadi and Shahabuddin, N.S. and Ahmad, Harith and Paul, Mukul Chandra and Das, S. and Dhar, A. and Pal, M. (2014) Dual-wavelength erbium-ytterbium co-doped fibre laser operating at 1064 and 1534 nm. Ukrainian Journal of Physical Optics, 15 (3). pp. 118-122. ISSN 1609-1833, DOI https://doi.org/10.3116/16091833/15/3/118/2014.
Kabir, H. and Kanesan, J. and Reza, A.W. and Ramiah, H. (2014) A hybrid algorithm of source localization based on hyperbolic technique in WSN. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.
Kadivar, M.A. and Akhbari, J. and Yousefid, R. and Rahi, A. and Ghahramani Nick, M. (2014) Investigating the effects of vibration method on ultrasonic-assisted drilling of Al/SiCp metal matrix composites. Elsevier, 30. pp. 344-3450.
Kanadasan, Jegathish and Razak, Hashim Abdul (2014) Mix design for self-compacting palm oil clinker concrete based on particle packing. Materials & Design, 56. pp. 9-19. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2013.10.086.
Karim, M.R. and SaifizuI, A.A. and Yamanaka, H. (2014) The effect of gross vehicle weight on platoon speed and size characteristics on two-lane road. In: International Conference on Innovative Trends in Multidisciplinary Academic Research, 20 – 21 October 2014, Istanbul, Turkey.
Khairul, M.A. and Hossain, A. and Saidur, R. and Alim, M.A. (2014) Prediction of heat transfer performance of CuO/water nanofluids flow in spirally corrugated helically coiled heat exchanger using fuzzy logic technique. Computers and Fluids, 100. pp. 123-129. ISSN 00457930, DOI https://doi.org/10.1016/j.compfluid.2014.05.007.
Khalaj, N. and Abu Osman, Noor Azuan and Mokhtar, A.H. and George, J. and Wan Abas, W.A.B. (2014) Effect of Intra-Articular Hyaluronic Injection on Postural Stability and Risk of Fall in Patients with Bilateral Knee Osteoarthritis. Scientific World Journal, 2014. pp. 1-6. ISSN 2356-6140, DOI https://doi.org/10.1155/2014/815184.
Khalaj, N. and Abu Osman, Noor Azuan and Mokhtar, A.H. and Mehdikhani, M. and Wan Abas, W.A.B. (2014) Balance and Risk of Fall in Individuals with Bilateral Mild and Moderate Knee Osteoarthritis. PLoS ONE, 9 (3). e92270. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0092270.
Khalaj, N. and Abu Osman, Noor Azuan and Mokhtar, A.H. and Wan Abas, W.A.B. (2014) Postural stability and pain in obese ladies with mild knee osteoarthritis after intra-articular hyalgan injection. Osteoarthritis and Cartilage, 22 (Supp.). S100-S101. ISSN 1063-4584, DOI https://doi.org/10.1016/j.joca.2014.02.191.
Khaleel, O.R. and Razak, Hashim Abdul (2014) Mix design method for self compacting metakaolin concrete with different properties of coarse aggregate. Materials & Design, 53. pp. 691-700. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2013.07.072.
Khan, M.M. and Ramesh, S. and Bang, L.T. and Wong, Y.H. and Ubenthiran, S. and Tan, C.Y. and Purbolaksono, J. and Misran, H. (2014) Effect of Copper Oxide and Manganese Oxide on Properties and Low Temperature Degradation of Sintered Y-TZP Ceramic. Journal of Materials Engineering and Performance, 23 (12). pp. 4328-4335. ISSN 1059-9495, DOI https://doi.org/10.1007/s11665-014-1231-1.
Ku, P.X. and Abu Osman, Noor Azuan and Wan Abas, W.A.B. (2014) Balance control in lower extremity amputees during quiet standing: a systematic review. Gait and Posture, 39 (2). pp. 672-682. ISSN 09666362 , DOI https://doi.org/10.1016/j.gaitpost.2013.07.006.
Kumar, A. and Suman, S. and Singh, G.K. (2014) A new closed form method for design of variable bandwidth linearphase FIR filter using different polynomials. AEU - International Journal of Electronics and Communications, 68. pp. 351-360. ISSN 1434-8411,
Laghari, J.A. and Mokhlis, Hazlie and Karimi, M. and Bakar, Ab Halim Abu and Mohamad, H. (2014) Computational Intelligence based techniques for islanding detection of distributed generation in distribution network: A review. Energy Conversion and Management, 88. pp. 139-152. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2014.08.024.
Law, K.H. and Othman, S.Z. and Hashim, Roslan and Ismail, Z. (2014) Determination of soil stiffness parameters at a deep excavation construction site in Kenny Hill Formation. Measurement: Journal of the International Measurement Confederation, 47 (1). pp. 645-650. ISSN 02632241, DOI https://doi.org/10.1016/j.measurement.2013.09.030.
Leong, K.H. and Gana, B.L. and Ibrahim, S. and Saravanan, P. (2014) Synthesis of surface plasmon resonance (SPR) triggered Ag/TiO2 photocatalyst for degradation of endocrine disturbing compounds. Applied Surface Science, 319. pp. 128-135. ISSN 0169-4332, DOI https://doi.org/10.1016/j.apsusc.2014.06.153.
Leong, K.H. and Monash, P. and Ibrahim, S. and Saravanan, P. (2014) Solar photocatalytic activity of anatase TiO2 nanocrystals synthesized by non-hydrolitic sol–gel method. Solar Energy, 101. pp. 321-332. ISSN 0038-092X, DOI https://doi.org/10.1016/j.solener.2014.01.006.
Lokman, A. and Nodehi, S. and Batumalay, Malathy and Arof, Hamzah and Ahmad, Harith and Harun, Sulaiman Wadi (2014) Optical fiber humidity sensor based on a tapered fiber with hydroxyethylcellulose/polyvinylidenefluoride composite. Microwave and Optical Technology Letters, 56 (2). pp. 380-382. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.28091.
Long, B.D. and Othman, R. and Zuhailawati, H. and Umemoto, M. (2014) Comparison of Two Powder Processing Techniques on the Properties of Cu-NbC Composites. Advances in Materials Science and Engineering, 2014. pp. 1-6. ISSN 1687-8434, DOI https://doi.org/10.1155/2014/160580.
Mahbubul, I.M. and Chong, T.H. and Khaleduzzaman, S.S. and Shahrul, I.M. and Saidur, Rahman and Long, B.D. and Amalina, Muhammad Afifi (2014) Effect of Ultrasonication Duration on Colloidal Structure and Viscosity of Alumina–Water Nanofluid. Industrial and Engineering Chemistry Research, 53 (16). pp. 6677-6684. ISSN 0888-5885, DOI https://doi.org/10.1021/ie500705j.
Mahbubul, I.M. and Khaleduzzaman, S.S. and Saidur, R. and Amalina, M.A. (2014) Rheological behavior of Al2O3/R141b nanorefrigerant. International Journal of Heat and Mass Transfer, 73. pp. 118-123. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2014.01.073.
Mahmoodian, R.A.B. and Hassan, M.A.A.C. and Ghadirian, S.B. and Hamdi, M.A. (2014) Study of Ti+C combustion synthesis reaction in a controlled declining temperature state. Combustion Science and Technology, 186 (6). pp. 737-746. ISSN 1563521X, DOI https://doi.org/10.1080/00102202.2013.878705.
Mekhilef, Saad and Saleh, Y.I. and Ghazi, S. and Shadman, F. (2014) Technical issues of grid connected renewable energy sources: A new areas of research. In: World Renewable Energy Congress - WREC XIII, 03-08 Aug 2014, Kingston University. (Submitted)
Mesbah, M. and Faraji, G. and Bushroa, Abdul Razak (2014) Characterization of nanostructured pure aluminum tubes produced by tubular channel angular pressing (TCAP). Materials Science and Engineering: A, 590. pp. 289-294. ISSN 0921-5093, DOI https://doi.org/10.1016/j.msea.2013.10.036.
Mirhassani, S.M. and Zourmand, A. and Ting, H.N. (2014) Fuzzy based multi-source data fusion for children's age estimation. In: Asia Pacific Conference on Medical and Biological Engineering, 09-12 Oct 2014, Tainan, Taiwan. (Submitted)
Moghaddam, Taher Baghaee and Soltani, Mehrtash and Karim, Mohamed Rehan (2014) Evaluation of permanent deformation characteristics of unmodified and Polyethylene Terephthalate modified asphalt mixtures using dynamic creep test. Materials & Design, 53. pp. 317-324. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2013.07.015.
Mohammadi, P. and Ibrahim, S. and Annuar, M.S.M. (2014) High-rate fermentative hydrogen production from palm oil mill effluent in an up-flow anaerobic sludge blanket-fixed film reactor. Chemical Engineering Research and Design, 92 (10). pp. 1811-1817. ISSN 0263-8762, DOI https://doi.org/10.1016/j.cherd.2014.04.023.
Mohd Fakharuzi, M.H.A. and Syed Omar, S.M.H. and Ward, T.A. and Sheng, O.C. and Hanapi, S. and Sainan, K.I. (2014) Design and testing of inertia dynamometer for prototype fuel cell electric vehicle. In: International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) 2014, 26-27 Aug 2014, Kuantan, Pahang.
Mohd Said, S. and Rahman, M.A. and Yamana, I. and Kimura, M. (2014) Investigation of host liquid crystal composition on polymer stabilised blue phase properties. In: Liquid Crystals XVIII, 17-21 Aug 2014, California, USA. (Submitted)
Mohseni, E. and Zalnezhad, E. and Bushroa, A.R. (2014) Comparative investigation on the adhesion of hydroxyapatite coating on Ti–6Al–4V implant: A review paper. International Journal of Adhesion and Adhesives, 48. pp. 238-257. ISSN 0143-7496, DOI https://doi.org/10.1016/j.ijadhadh.2013.09.030.
Mokhlis, Hazlie and Shahriari, A. and Bakar, Ab Halim Abu and Illias, Hazlee Azil and Karimi, M. (2014) Improved Step Size Newton Raphson Method using quadratic equations properties in ill-conditioned power system. International Transactions on Electrical Energy Systems, 24 (9). pp. 1323-1342. ISSN 2050-7038, DOI https://doi.org/10.1002/etep.1786.
Motasemi, F. and Afzal, M.T. and Salema, A.A. and Moghavvemi, M. and Shekarchian, M. and Zarifi, F. and Mohsin, R. (2014) Energy and exergy utilization efficiencies and emission performance of Canadian transportation sector, 1990-2035. Energy, 46. pp. 355-366. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2013.09.064.
Muhammad, B. and Ibrahim, Z. and Ghazali, K.H. and Ghazali, M.R. and Mubin, M. and Mokhtar, M. (2014) Performance evaluation of vector evaluated gravitational search algorithm II. In: 13th International Conference on Intelligent Software Methodologies, Tools, and Techniques, 22-24 Sep 2014, Langkawi, Malaysia.
Muhammad Sani, Y. and Daud, Wan Mohd Ashri Wan and Abdul Raman, Abdul Aziz (2014) Activity of solid acid catalysts for biodiesel production: A critical review. Applied Catalysis A: General, 470. pp. 140-161. ISSN 0926-860X, DOI https://doi.org/10.1016/j.apcata.2013.10.052.
Mukherjee, S. and Mukhopadhyay, S. and Agamuthu, Pariatamby and Hashim, Mohd Ali and Sahu, J.N. and Sen Gupta, B. (2014) A comparative study of biopolymers and alum in the separation and recovery of pulp fibres from paper mill effluent by flocculation. Journal of Environmental Sciences, 26 (9). pp. 1851-1860. ISSN 1001-0742, DOI https://doi.org/10.1016/j.jes.2014.06.029.
Mukhopadhyay, S. and Hashim, M.A. and Allen, M. and Sen Gupta, B. (2014) Arsenic removal from soil with high iron content using a natural surfactant and phosphate. International Journal of Environmental Science and Technology. pp. 1-16. DOI https://doi.org/10.1007/s13762-013-0441-7. (In Press)
Naidu, K. and Mokhlis, Hazlie and Bakar, Ab Halim Abu (2014) Multiobjective optimization using weighted sum Artificial Bee Colony algorithm for Load Frequency Control. International Journal of Electrical Power & Energy Systems, 55. pp. 657-667. ISSN 0142-0615, DOI https://doi.org/10.1016/j.ijepes.2013.10.022.
Naidu, K. and Mokhlis, Hazlie and Bakar, Ab Halim Abu and Terzija, V. (2014) Application of firefly algorithm with online wavelet filter in automatic generation control of an interconnected reheat thermal power system. International Journal of Electrical Power & Energy Systems, 63. pp. 401-413. ISSN 0142-0615, DOI https://doi.org/10.1016/j.ijepes.2014.05.055.
Nee, L.S. and Mohamed Jan, B. and Si Ali, B. and Noor, I.M. (2014) The Effects of Glass Bubbles, Clay, Xanthan Gum and Starch Concentrations on the Density of Lightweight Biopolymer Drilling Fluid. Applied Mechanics and Materials, 625. pp. 526-529. ISSN 1660-9336, DOI https://doi.org/10.4028/www.scientific.net/AMM.625.526.
Ng, T.S. and Ching, Yern Chee and Awanis, N. and Ishenny, N. and Rahman, M.R. (2014) Effect of bleaching condition on thermal properties and UV transmittance of PVA/cellulose biocomposites. Materials Research Innovations, 18 (S6). pp. 400-404. ISSN 1432-8917, DOI https://doi.org/10.1179/1432891714Z.000000000986.
Noraini, M.Y. and Ong, Hwai Chyuan and Mohamed Jan, Badrul and Chong, W.T. (2014) A review on potential enzymatic reaction for biofuel production from algae. Renewable and Sustainable Energy Reviews, 39. pp. 24-34. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2014.07.089.
Omar, S.M.H.S. and Arshad, N.M. and Yassin, I.M. and Fakharuzi, M.H.A.M. and Ward, T.A. (2014) Design and optimization of powertrain system for automated controlling system on prototype fuel cell electric vehicle. In: International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) 2014, 26-27 Aug 2014, Kuantan, Pahang.
Pouran, S.R. and Abdul Raman, Abdul Aziz and Daud, Wan Mohd Ashri Wan (2014) Review on the application of modified iron oxides as heterogeneous catalysts in Fenton reaction. Journal of Cleaner Production, 64. pp. 24-35. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2013.09.013.
Rahman, H.A. and Harun, Sulaiman Wadi and Arof, Hamzah and Irawati, Ninik and Musirin, I. and Ibrahim, Fatimah and Ahmad, Harith (2014) Classification of reflected signals from cavitated tooth surfaces using an artificial intelligence technique incorporating a fiber optic displacement sensor. Journal of Biomedical Optics (JBO), 19 (5). 057009. ISSN 1083-3668, DOI https://doi.org/10.1117/1.JBO.19.5.057009.
Raja Ghazilla, R.A. and Sakundarini, N. and Abdul Rashid, S.H. and Ayub, N.S. and Olugu, E. and Musa, S.N. (2014) Drivers and barriers analysis for green manufacturing practices in Malaysian SMEs : A preliminary findings. In: Global Conference on Sustainable Manufacturing, 22-24 Sep 2014, Johor Bahru.
Rosli, H.M. and Mokhlis, Hazlie and Naidu, K. and Jamian, J.J. and Bakar, Ab Halim Abu (2014) Improving State Estimation Accuracy Through Incremental Meter Placement Using New Evolutionary Strategy. Arabian Journal for Science and Engineering, 39 (11). pp. 7981-7989. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-014-1397-8.
Roy, S. and Ramiah, H. and Reza, A.W. (2014) Designing a sustaining amplifier for a 17.22 MHz electrostatic resonator based reference oscillator. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.
Roy, T. and Choudhury, D. and Azuddin, Mamat and Pingguan-Murphy, Belinda (2014) Fabrication and characterization of micro-dimple array on Al2O3 surfaces by using a micro-tooling. Ceramics International, 40 (1). pp. 2381-2388. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2013.08.009.
Sadollah, A. and Bahreininejad, A. and Abd Shukor, Mohd Hamdi and Purbolaksono, J. (2014) Optimum mechanical behavior of calcium phosphate cement/hydroxyl group functionalized multi-walled carbon nanotubes/bovine serum albumin composite using metaheuristic algorithms. Neural Computing and Applications. pp. 1-8. ISSN 0941-0643,
Sajjad, H. and Masjuki, Haji Hassan and Varman, Mahendra and Kalam, Md. Abul and Arbab, M.I. and Imtenan, S. and Ashrafur Rahman, S.M. (2014) Engine Combustion, performance and emission characteristics of gas to liquid (GTL) fuels and its blends with diesel and bio-diesel. Renewable and Sustainable Energy Reviews, 30. pp. 961-986. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2013.11.039.
Sajjad, H. and Masjuki, Haji Hassan and Varman, Mahendra and Khan, Mohammad Mahmudur Rahman and Arbab, M.I. and Imtenan, S. and Sanjid, A. (2014) Comparative study of biodiesel, GTL fuel and their blends in context of engine performance and exhaust emission. Procedia Engineering, 90. 466 - 471. ISSN 1877-7058, DOI https://doi.org/10.1016/j.proeng.2014.11.758.
Sajjadi, Baharak and Abdul Raman, Abdul Aziz and Baroutian, Saeid and Ibrahim, Shaliza (2014) Investigation of convection and diffusion during biodiesel production in packed membrane reactor using 3D simulation. Journal of Industrial and Engineering Chemistry, 20 (4). pp. 1493-1504. ISSN 1226-086X, DOI https://doi.org/10.1016/j.jiec.2013.07.038.
Sajjadi, Baharak and Abdul Raman, Abdul Aziz and Baroutian, Saeid and Ibrahim, Shaliza and Raja Ehsan Shah, Raja Shazrin Shah (2014) 3D Simulation of fatty acid methyl ester production in a packed membrane reactor. Fuel Processing Technology, 118. pp. 7-19. ISSN 0378-3820, DOI https://doi.org/10.1016/j.fuproc.2013.07.015.
Sakundarini, N. and Raja Ghazilla, R.A. and Abdul Rashid, S.H. and Taha, Z. (2014) Development of method for optimizing product end of life strategies in modular design. In: International Symposium on Green Manufacturing and Applications (ISGMA 2014), 24-28 June 2014, Busan, Korea.
Sarhan, Ahmed Aly Diaa Mohammed and Ooi, M.E. and Sayuti, M. and Abd Shukor, Mohd Hamdi (2014) Investigate the possibility of using carbon onion nanolubrication with DLC cutting tool to reduce the machining power consumption. In: Proceedings of the International Conference Advances in Mechanical & Automation Engineering, 07-08 June 2014, Rome, Italy.
Shafie, S.M. and Masjuki, Haji Hassan and Mahlia, Teuku Meurah Indra (2014) Rice straw supply chain for electricity generation in Malaysia: Economical and environmental assessment. Applied Energy, 135. pp. 299-308. ISSN 0306-2619, DOI https://doi.org/10.1016/j.apenergy.2014.08.101.
Shafie, S.M.A. and Masjuki, Haji Hassan and Mahlia, Teuku Meurah Indra (2014) Life cycle assessment of rice straw-based power generation in Malaysia. Energy, 70. pp. 401-410. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2014.04.014.
Shahriari, A. and Mokhlis, Hazlie and Bakar, Ab Halim Abu and Illias, Hazlee Azil (2014) Optimal multiplier load flow method using concavity theory. Applied Mathematics and Computation, 245. pp. 487-503. ISSN 0096-3003, DOI https://doi.org/10.1016/j.amc.2014.07.113.
Shahriari, A. and Mokhlis, Hazlie and Karimi, M. and Bakar, Ab Halim Abu and Illias, Hazlee Azil (2014) Quadratic Discriminant Index for Optimal Multiplier Load Flow Method in ill conditioned system. International Journal of Electrical Power & Energy Systems, 60. pp. 378-388. ISSN 0142-0615, DOI https://doi.org/10.1016/j.ijepes.2014.03.028.
Shirazi, M.R. and Harun, Sulaiman Wadi and Ahmad, Harith (2014) Multi-wavelength Brillouin Raman erbium-doped fiber laser generation in a linear cavity. Journal of Optics, 16 (3). pp. 1-4. ISSN 2040-8978, DOI https://doi.org/10.1088/2040-8978/16/3/035203.
Siddiqui, M.F. and Reza, A.W. and Kanesan, J. and Omer, H. (2014) A new parameterized architectural design for SENSE reconstruction. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.
Sim, L.C. and Leong, K.H. and Ibrahim, S. and Saravanan, P. (2014) Graphene oxide and Ag engulfed TiO2 nanotube arrays for enhanced electron mobility and visible-light-driven photocatalytic performance. Journal of Materials Chemistry A, 2 (15). pp. 5315-5322. ISSN 2050-7488, DOI https://doi.org/10.1039/C3TA14857B.
Sim, L.C. and Ng, K.W. and Ibrahim, Shaliza and Saravanan, P. (2014) Synthesis, Features and Solar-Light-Driven Photocatalytic Activity of TiO2 Nanotube Arrays Loaded with SnO2. Journal of Nanoscience and Nanotechnology, 14 (9). pp. 7001-7009. ISSN 1533-4880, DOI https://doi.org/10.1166/jnn.2014.8931.
Sulaiman, Azlan and Harun, Sulaiman Wadi and Ahmad, F. and Ahmad, Harith (2014) Nonadiabatic microfiber based mode-locked erbium-doped fiber laser using graphene. Microwave and Optical Technology Letters, 56 (7). pp. 1670-1673. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.28414.
Sulaiman, Azlan and Harun, Sulaiman Wadi and Ahmad, Harith (2014) Ring microfiber coupler erbium-doped fiber laser analysis. Chinese Optics Letters, 12 (2). 021403. ISSN 1671-7694,
Sutharsini, U. and Ramesh, S. and Wong, Y.H. and Misran, H. and Yusuf, F. and Tan, C.Y. and Purbolaksono, J. and Teng, W.D. (2014) Effect of sintering holding time on low-temperature degradation of yttria stabilised zirconia ceramics. Materials Research Innovations, 18 (S6). S6-408-S6-411. ISSN 1432-8917, DOI https://doi.org/10.1179/1432891714Z.000000000988.
Tahriri, F. and Dabbagh, M. and Ale Ebrahim, N. (2014) Supplier assessment and selection using fuzzy analytic hierarchy process in a steel manufacturing company. Journal of Scientific Research and Reports, 3 (10). pp. 1319-1338. ISSN 2320–0227, DOI https://doi.org/10.5281/zenodo.8612.
Tan, B.K. and Ching, Yern Chee and Gan, Seng Neon and Ramesh, Singh and Rahman, M.R. (2014) Water absorption properties of kenaf fibre-poly(vinyl alcohol) composites. Materials Research Innovations, 18 (S6). pp. 144-146. ISSN 1432-8917, DOI https://doi.org/10.1179/1432891714Z.000000000946.
Tan, K.H. and Lai, S.H. and Ibrahim, S. and Sulaiman, N.M.N. and Sharifi, M. and Abe, S. (2014) Impact of Fine Sediment on TSS and Turbidity in Retention Structure. Journal of Geoscience and Environment Protection, 2 (4). pp. 1-8. ISSN 2327-4336, DOI https://doi.org/10.4236/gep.2014.24001.
Tharsika, T. and Haseeb, A.S. Md. Abdul and Akbar, S.A. and Sabri, M.F.M. and Wong, Y.H. (2014) Enhanced Ethanol Gas Sensing Properties of SnO2-Core/ZnO-Shell Nanostructures. Sensors, 14 (8). pp. 14586-14600. ISSN 1424-8220, DOI https://doi.org/10.3390/s140814586.
Tiu, Z.C. and Tan, S.J. and Ahmad, Harith and Harun, Sulaiman Wadi (2014) Dark pulse emission in nonlinear polarization rotation-based multiwavelength mode-locked erbium-doped fiber laser. Chinese Optics Letters, 12 (11). p. 113202. ISSN 1671-7694,
Wagiman, Abdullah and Wahab, Mohd Saidin and Mohid, Zazuli and Mamat, Azuddin (2014) Effect of GMAW-CMT Heat Input on Weld Bead Profile Geometry for Freeform Fabrication of Aluminium Parts. Applied Mechanics and Materials, 465. pp. 1370-1374. ISSN 1660-9336, DOI https://doi.org/10.4028/www.scientific.net/AMM.465-466.1370.
Wardah, T. and Sharifah Nurul Huda, Y.S. and Suzana, R. and Hamzah, A. (2014) WRF model input for improved radar rainfall estimates using kalman filter. In: 2014 International Symposium on Technology Management and Emerging Technologies (ISTMET 2014), 27-29 May 2014, Bandung, Indonesia.
Wong, Y.H. and Ramesh, S. and Tan, C.Y. and Projjal, B. (2014) Development of Sn–Cu–Sb alloys for making lead- and bismuth-free pewter. International Journal of Materials Research, 105 (2). pp. 183-187. ISSN 1862-5282, DOI https://doi.org/10.3139/146.111011.
Wong, Yew Hoong and Atuchin, V.V. and Kruchinin, V.N. and Cheong, K.Y. (2014) Physical and dispersive optical characteristics of ZrON/Si thin-film system. Applied Physics A, 115 (3). pp. 1069-1072. ISSN 0947-8396, DOI https://doi.org/10.1007/s00339-013-7947-1.
Yau, Y.H. and Chuah, K.H. and Tey, M.R. and Yip, P.N. and Lim, C.S. and Chong, T.H. and Krishnan, R. (2014) Feasibility study of using heat recovery devices in HVAC systems in a building in the tropics. In: The 13th International Conference on Indoor Air Quality and Climate, 07-12 July 2014, Hong Kong.
Yuen, C.W. and Karim, M.R. and Saifizul, A. (2014) Analysis of Motorcyclist Riding Behaviour on Speed Table. Scientific World Journal, 2014. pp. 1-9. ISSN 2356-6140, DOI https://doi.org/10.1155/2014/236396.
Yuen, C.W. and Karim, M.R. and Saifizul, A. (2014) Investigation on Motorcyclist Riding Behaviour at Curve Entry Using Instrumented Motorcycle. Scientific World Journal, 2014. pp. 1-9. ISSN 2356-6140, DOI https://doi.org/10.1155/2014/968946.
Zainah, I. and Ahmad Fahmy, K. and Adiza, J. and Azmi, I. and Mohd Effendi, D. and Aziman, M. (2014) Ambient vibration testing of damaged RC building structure. In: International Conference on Innovative Trends in Multidisciplinary Academic Research, 20-21 October 2014, Istanbul, Turkey.
Zarei, A. and Rosdin, R.Z.R.R. and Ali, N.M. and Ahmad, Harith and Harun, Sulaiman Wadi (2014) Brillouin Lasing with a Reduced Self-Pulsing Characteristic Using a Short-Length Erbium-Doped Fiber as the Nonlinear Gain Medium. Chinese Physics Letters, 31 (5). pp. 1-4. ISSN 0256-307X, DOI https://doi.org/10.1088/0256-307X/31/5/054202.
Zavareh, M.A. and Sarhan, Ahmed A.D. and Bushroa, Abdul Razak and Basirun, Wan Jefrey (2014) Plasma thermal spray of ceramic oxide coating on carbon steel with enhanced wear and corrosion resistance for oil and gas applications. Ceramics International, 40 (9). pp. 14267-14277. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2014.06.017.
Zourmand, Alireza and Mirhassani, Seyed Mostafa and Ting, Hua Nong and Bux, Shaik Ismail and Ng, Kwan Hoong and Bilgen, Mehmet and Jalaludin, Mohd Amin (2014) A magnetic resonance imaging study on the articulatory and acoustic speech parameters of Malay vowels. BioMedical Engineering OnLine, 13 (1). p. 103. ISSN 1475-925X, DOI https://doi.org/10.1186/1475-925X-13-103.
Zulkifley, Mohamad Tarmizi Mohamad and Ng, Tham Fatt and Raj, John Kuna and Hashim, Roslan and Ashraf, Muhammad Aqeel (2014) Effects of Lateral Variation in Vegetation and Basin ‘Dome’ Shape on Tropical Lowland Peat Stabilisation in the Kota Samarahan-Asajaya Area, West Sarawak, Malaysia. Acta Geologica Sinica - English Edition, 88 (3). pp. 894-914. ISSN 1755-6724, DOI https://doi.org/10.1111/1755-6724.12245.
Zulkifli, Nurin Wahidah Mohd and Kalam, Md. Abul and Masjuki, Haji Hassan and Al Mahmud, K.A.H. and Yunus, R. (2014) The Effect of Temperature on Tribological Properties of Chemically Modified Bio-Based Lubricant. Tribology Transactions, 57 (3). pp. 408-415. ISSN 1040-2004, DOI https://doi.org/10.1080/10402004.2013.878777.
Zulkifli, Nurin Wahidah Mohd and Kalam, Md. Abul and Masjuki, Haji Hassan and Al Mahmud, K.A.H. and Yunus, R. (2014) The effect of palm oil trimethylolpropane ester on extreme pressure lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 228 (2). pp. 160-169. ISSN 1350-6501, DOI https://doi.org/10.1177/1350650113500945.
