 | Up a level |
Abd Shukor, Mohd Hamdi and Ide-Ektessabi, A. (2007) Dissolution behavior of simultaneous vapor deposited calcium phosphate coatings in vitro. Materials Science and Engineering: C, 27 (4). pp. 670-674. ISSN 0928-4931,
Abd Shukor, Mohd Hamdi and Ide-Ektessabi, A. and Toque, J.A. (2007) In vitro study of electron beam deposited calcium phosphate coating in simulated body fluid. Journal of Materials Research, 22 (03). pp. 621-626. ISSN 0884-2914,
Abdul Raman, Abdul Aziz and Nik Sulaiman, Nik Meriam and Ibrahim, Shaliza and Sethu, Vasanthi (2007) Bubble size distribution: comparison between six-bladed curve blade impeller and Rushton Turbine. Malaysian Journal of Chemical Engineering, 1. pp. 163-170. ISSN 1985-3564,
Abidin, M.S.Z. and Naji, A.W. and Al-Mansoori, M.H. and Adikan, Faisal Rafiq Mahamd and Mahdi, M.A. (2007) Optimisation of remotely-pumped EDFA location for unrepeatered transmission systems. Electrical Engineering, 89 (4). pp. 349-352. ISSN 0948-7921,
Abou-El-Hossein, K.A. and Kadirgama, K. and Abd Shukor, Mohd Hamdi and Benyounis, K.Y. (2007) Prediction of cutting force in end-milling operation of modified AISI P20 tool steel. Journal of Materials Processing Technology, 182 (1). pp. 241-247.
Adinata, D. and Daud, W.M.A.W. and Aroua, M.K. (2007) Production of carbon molecular sieves from palm shell based activated carbon by pore sizes modification with benzene for methane selective separation. Fuel Processing Technology, 88 (6). pp. 599-605. ISSN 0378-3820, DOI https://doi.org/10.1016/j.fuproc.2007.01.009.
Adinata, D. and Daud, Wan Mohd Ashri Wan and Aroua, M.K. (2007) Preparation and characterization of activated carbon from palm shell by chemical activation with K2CO3. Bioresource Technology, 98 (1). pp. 145-149. ISSN 0960-8524, DOI https://doi.org/10.1016/j.biortech.2005.11.006.
Adinata, D. and Daud, Wan Mohd Ashri Wan and Aroua, Mohamed Kheireddine (2007) Carbon modified silica based adsorbent for potential application. Journal of Nanoparticle Research, 9 (4). pp. 555-559. ISSN 1388-0764, DOI https://doi.org/10.1007/s11051-005-8795-5.
Ahmad, Harith and Harun, Sulaiman Wadi and Chong, Wu Yi and Zulkifli, Mohd Zamani and Thant, Muang Muang Myo and Yusof, Zainun and Poopalan, Prabakaran (2007) High-sensitivity pressure sensor using a polymer-embedded FBG. Microwave and Optical Technology Letters, 50 (1). pp. 60-61. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.23021.
Ahmad, Harith and Shahabuddin, Nurul Shahrizan and Dimyati, Kaharudin and Jusoh, Zulzilawati and Harun, Sulaiman Wadi (2007) An Enhanced Bismuth-Based Brillouin/Erbium Fiber Laser with Linear Cavity Configuration. Fiber and Integrated Optics, 27 (1). pp. 35-40. ISSN 0146-8030, DOI https://doi.org/10.1080/01468030701679037.
Ahmad, M.A. and Daud, Wan Mohd Ashri Wan and Aroua, Mohamed Kheireddine (2007) Synthesis of carbon molecular sieves from palm shell by carbon vapor deposition. Journal of Porous Materials, 14 (4). pp. 393-399. ISSN 1380-2224, DOI https://doi.org/10.1007/s10934-006-9032-z.
Ahmed, Shafaat and Haseeb, A.S. Md. Abdul and Kurny, A.S.W. (2007) Study of the wear behaviour of Al–4.5% Cu–3.4% Fe in situ composite: Effect of thermal and mechanical processing. Journal of Materials Processing Technology, 182 (1-3). pp. 327-332. ISSN 0924-0136, DOI https://doi.org/10.1016/j.jmatprotec.2006.08.009.
Aroua, M.K. and Zuki, F.M. and Sulaiman, N.M. (2007) Removal of chromium ions from aqueous solutions by polymer-enhanced ultrafiltration. Journal of Hazardous Materials, 147 (3). pp. 752-758. ISSN 0304-3894,
Benamor, A. and Aroua, M.K. (2007) An experimental investigation on the rate of CO2 absorption into aqueous methyldiethanolamine solutions. Korean Journal of Chemical Engineering, 24 (1). pp. 16-23. ISSN 0256-1115, DOI https://doi.org/10.1007/s11814-007-5003-6.
Cheng, Xiau San and Harun, Sulaiman Wadi and Ahmad, Harith (2007) Effects of output coupler reflectivity on the performance of a linear cavity Brillouin/erbium fiber laser. Pramana, 68 (3). pp. 451-456. ISSN 0304-4289, DOI https://doi.org/10.1007/s12043-007-0048-y.
Cho, J. and Choi, J. and Nam, T. and Park, J. and Park-Ko, I. and Ibrahim, F. (2007) Development of tilt table with visual feedback function for hemiplegia patients. Conference proceedings : Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference, 2007. pp. 4782-4785. ISSN 1557-170X , DOI https://doi.org/10.1109/IEMBS.2007.4353409.
Daud, W.M.A.W. and Ahmad, M.A. and Aroua, M.K. (2007) Carbon molecular sieves from palm shell: Effect of the benzene deposition times on gas separation properties. Separation and Purification Technology, 57 (2). pp. 289-293. ISSN 1383-5866, DOI https://doi.org/10.1016/j.seppur.2007.04.006.
Dihayati, Y. and Abdul Raman, Abdul Aziz and Abdullah, E.C. and Leong, Y.C. and Harcharan, S. (2007) Encapsulation method for CaCO3 nanoparticles. Journal of Applied Sciences, 7 (15). pp. 2046-2050.
Ghasem, N.M. and Sata, S.A. and Hussain, Mohd Azlan (2007) Temperature control of a bench-scale batch polymerization reactor for polystyrene production. Chemical Engineering & Technology, 30 (9). pp. 1193-1202. ISSN 0930-7516, DOI https://doi.org/10.1002/ceat.200700165.
Harun, Sulaiman Wadi and Ahmad, Harith (2007) Gain and noise figure improvements in double-pass S-band EDFA. Optics & Laser Technology, 39 (5). pp. 935-938. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2006.06.017.
Harun, Sulaiman Wadi and Cheng, Xiau San and Ahmad, Harith (2007) An efficient S-band brillouin erbium fiber laser with additional EDFA. Optics & Laser Technology, 39 (3). pp. 616-618. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2005.09.003.
Harun, Sulaiman Wadi and Cheng, Xiau San and Poopalan, Prabakaran and Ahmad, Harith (2007) Self-excited brillouin-erbium fiber laser for DWDM applications. Optics & Laser Technology, 39 (1). pp. 94-97. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2005.05.008.
Hasanuzzaman, M. and Saidur, Rahman and Ali, M. and Masjuki, Haji Hassan (2007) Effects of variables on natural convective heat transfer through V-corrugated vertical plates. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 109-117. ISSN 18230334,
Huat, Bujang B.K. and Ali, Faisal and Choong, F.H. (2007) Effect of stress history on the volume change behavior of unsaturated residual soil. Electronic Journal of Geotechnical Engineering, 12 (D). ISSN 1089-3032,
Hussain, Mohd Azlan and Aroua, Mohamed Kheireddine (2007) Special issue on process systems engineering. Asia-Pacific Journal of Chemical Engineering, 2 (6). pp. 499-500. ISSN 1932-2135, DOI https://doi.org/10.1002/apj.104.
Hussin, I.H. and Usman, Juliana and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan (2007) Body performance standards of healthy Malaysians: adult range of fitness level. Journal of Biomechanics, 40 (2). p. 767. ISSN 0021-9290,
Ibrahim, F. and Wan Abas, W.A.B. and Taib, M.N. and Guan, C.C. and Sulaiman, S. (2007) A new approach to classify risk in dengue infection using bioelectrical impedance analysis. Dengue Bulletin, 31. pp. 58-74. ISSN 1020895X,
Ibrahim, S. (2007) Mixing in the mechanically agitated bioreactor: ‘a matter of being stirred, not shaken’. Journal of the Institution of Engineers, Malaysia, 68 (3). pp. 43-47. ISSN 0126-513X,
Ismail, Z. and Aziz, N.A. and Hashim, Roslan (2007) Seawater intrusion into groundwater, peninsular Malaysia. Journal of Environmental Hydrology, 15. pp. 1-8. ISSN 10583912,
Jahirul, M.I. and Saidur, Rahman and Hasanuzzaman, M. and Masjuki, Haji Hassan and Kalam, M.A. (2007) A comparison of the air pollution of gasoline and CNG driven car for Malaysia. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 130-138. ISSN 18230334 ,
Jahirul, M.I. and Saidur, Rahman and Masjuki, Haji Hassan and Ahmed, S. and Kalam, M.A. (2007) Environmental effects of conversion of petroleum fuel-based motor cars to natural gas vehicles (NGVs). International Journal of Mechanical and Materials Engineering. pp. 35-43.
Jang, M. and Min, S.H. and Park, J.K. and Tlachac, E.J. (2007) Hydrous ferric oxide incorporated diatomite for remediation of arsenic contaminated groundwater. Environmental Science and Technology, 41 (9). pp. 3322-3328. ISSN 0013-936X, DOI https://doi.org/10.1021/es062359e.
Jang, Min and Hwang, J.S. and Choi, S.I. (2007) Sequential soil washing techniques using hydrochloric acid and sodium hydroxide for remediating arsenic-contaminated soils in abandoned iron-ore mines. Chemosphere, 66 (1). pp. 8-17. ISSN 0045-6535, DOI https://doi.org/10.1016/j.chemosphere.2006.05.056.
Kadri, Nahrizul Adib and Ahamad, A.R. and Abdul-Latip, E.N. and Azlan, C.A. and Raha, M.G. and Mohd-Nasir, N.F. (2007) Temperature modeling of therapeutic ultrasound: a preliminary finding. Biomeds. pp. 594-597.
Kho, F.W.L. and Law, P.L. and Ibrahim, Shaliza and Sentian, J. (2007) Carbon monoxide levels along roadway. International Journal of Environmental Science and Technology, 4 (1). pp. 27-34. ISSN 1735-1472,
Liew Abdullah, A.G. and Sulaiman, N.M. and Aroua, M.K. and Megat Mohd Noor, M.J. (2007) Response surface optimization of conditions for clarification of carambola fruit juice using a commercial enzyme. Journal of Food Engineering, 81 (1). pp. 65-71. ISSN 0260-8774, DOI https://doi.org/10.1016/j.jfoodeng.2006.10.013.
Mahdi, M.A. and Adikan, Faisal Rafiq Mahamd and Subramaniam, T. and Ahmad, Harith (2007) Characterization of lasing-oscillation direction in optical gain-clamped erbium-doped fiber amplifiers. Optics & Laser Technology, 39 (5). pp. 1020-1024. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2006.05.006.
Mekhilef, Saad and Omar, A.M. and Rahim, N.A. (2007) Modeling of three-phase uniform symmetrical sampling digital PWM for power converter. IEEE Transactions on Industrial Electronics, 54 (1). pp. 427-432. ISSN 0278-0046, DOI https://doi.org/10.1109/TIE.2006.885151.
Min, S.H. and Eberhardt, T.L. and Jang, M. (2007) Base-treated juniper fiber media for removing heavy metals in stormwater runoff. Polish Journal of Environmental Studies, 16 (5). pp. 731-738. ISSN 12301485,
Misran, H. and Singh, R. and Begum, S. and Yarmo, M.A. (2007) Processing of mesoporous silica materials (MCM-41) from coal fly ash. Journal of Materials Processing Technology, 186 (1-3). pp. 8-13.
Mohiuddin, A.K.M. and Saidur, Rahman and Sattar, M.A. and Rahman, A. (2007) Comparison of drift eliminators characteristics in evaporative condenser and spray-filled tower. International Energy Journal, 8 (3). pp. 155-162. ISSN 1513718X,
Muhd-Yassin, Shahrin Zen and Harun, Sulaiman Wadi and Abdul-Rashid, Hairul Azhar and Abd-Rahman, Mohd Kamil and Rahman, Faidz Abd and Ahmad, Harith (2007) An efficient EYDFA with a 54 dB small signal gain. Microwave and Optical Technology Letters, 49 (10). pp. 2337-2339. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.22750.
Muhd-Yassin, Shahrin Zen and Harun, Sulaiman Wadi and Ahmad, Harith and Abd-Rahman, Mohd Kamil (2007) Highly saturated EDFA for gain clamping operation. Microwave and Optical Technology Letters, 49 (8). pp. 1815-1816. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.22635.
Naji, A.W. and Abidin, M.S.Z. and Al-Mansoori, M.H. and Adikan, Faisal Rafiq Mahamd and Mahdi, M.A. (2007) Optimisation of remotely-pumped Er3+-doped fibre amplifier location in repeaterless transmission systems. Optics Communications, 272 (1). pp. 205-210. ISSN 0030-4018,
Ong, C. and Ibrahim, S. and Gupta, B.S. (2007) A survey of tap water quality in Kuala Lumpur. Urban Water Journal, 4 (1). pp. 29-41. ISSN 1573-062X, DOI https://doi.org/10.1080/15730620601145923.
Ooi, C.Y. and Abd Shukor, Mohd Hamdi and Ramesh, S. (2007) Properties of hydroxyapatite produced by annealing of bovine bone. Ceramics International, 33 (7). pp. 1171-1177. ISSN 0272-8842,
Pua, Chang Hong and Harun, Sulaiman Wadi and Chong, Wu Yi and Jayapalan, Kanesh Kumar and Ahmad, Harith (2007) Dynamic dispersing technique for PR coating process in planar lightwave circuit fabrication. Microwave and Optical Technology Letters, 49 (8). pp. 1993-1995. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.22609.
Rahman, Herman Shah and Abu Osman, Noor Azuan and Yahud, S. and Tunku Yahya, T.S. and Ng, Eng Seng (2007) A study of the external finger fixator to correct flexion deformity. Journal of Biomechanics, 40 (Spp.2). S183. ISSN 0021-9290, DOI https://doi.org/10.1016/S0021-9290(07)70179-3.
Ramesh, S. and Tan, C.Y. and Sopyan, I. and Abd Shukor, Mohd Hamdi and Teng, W.D. (2007) Consolidation of nanocrystalline hydroxyapatite powder. Science and Technology of Advanced Materials, 8 (1-2). pp. 124-130.
Ramli Sulong, N.H. and Elghazouli, A.Y. and Izzuddin, B.A. (2007) Behaviour and design of beam-to-column connections under fire conditions. Fire Safety Journal, 42 (6-7). pp. 437-451. ISSN 0379-7112, DOI https://doi.org/10.1016/j.firesaf.2006.09.003.
Rashid, M.M. and Hussain, Mohd Azlan and Rahim, N. Abd and Momoh, J.S. (2007) Development of a semi-active car suspension control system using magneto-rheological damper model. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 93-108. ISSN 18230334,
Saidur, Rahman and Hasanuzzaman, M. and Sattar, M.A. and Masjuki, Haji Hassan and Badruddin, I.A. and Mohiuddin, A.K.M. (2007) An analysis of energy use, energy intensity and emissions at the industrial sector of Malaysia. International Journal of Mechanical and Materials Engineering, 2 (1). pp. 84-92. ISSN 1823-0334,
Saidur, Rahman and Jahirul, M.I. and Moutushi, T.Z. and Imtiaz, H. and Masjuki, Haji Hassan (2007) Effect of partial substitution of diesel fuel by natural gas on performance parameters of a four-cylinder diesel engine. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221 (1). pp. 1-10. ISSN 0957-6509, DOI https://doi.org/10.1243/09576509JPE182.
Saidur, Rahman and Masjuki, Haji Hassan and Jamaluddin, M.Y. (2007) An application of energy and exergy analysis in residential sector of Malaysia. Energy Policy, 35 (2). pp. 1050-1063. ISSN 0301-4215, DOI https://doi.org/10.1016/j.enpol.2006.02.006.
Saidur, Rahman and Masjuki, Haji Hassan and Jamaluddin, M.Y. and Ahmed, S. (2007) Energy and associated greenhouse gas emissions from household appliances in Malaysia. Energy Policy, 35 (3). pp. 1648-1657. ISSN 0301-4215, DOI https://doi.org/10.1016/j.enpol.2006.05.006.
Saidur, Rahman and Sattar, M.A. and Hasanuzzaman, M. and Cheng, C.F. and Masjuki, Haji Hassan (2007) Open and closed door moisture transport and corresponding energy consumption in household refrigerator. Journal of Energy & Environment,, 6. pp. 18-27.
Saidur, Rahman and Sattar, M.A. and Masjuki, Haji Hassan and Ahmed, S. and Hashim, U. (2007) An estimation of the energy and exergy efficiencies for the energy resources consumption in the transportation sector in Malaysia. Energy Policy, 35 (8). pp. 4018-4026. ISSN 0301-4215, DOI https://doi.org/10.1016/j.enpol.2007.02.008.
Sattar, M.A. and Saidur, Rahman and Masjuki, Haji Hassan (2007) Butane, isobutane and their mixtures as an alterantives to R-134a in domestic refrigerator. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 154-160. ISSN 18230334 ,
Sattar, M.A. and Saidur, Rahman and Masjuki, Haji Hassan (2007) Pure Butane as refrigerant in domestic refrigerator freezer. Greater Mekong Subregion Academic And Research Network, 2. pp. 29-34. ISSN 1905-9094,
Sharizli, A.A. and Zabir, F.A. and Abu Osman, Noor Azuan and Radzi, Z. and Shaifizul, A.A. (2007) Preliminary design of an automated rapid maxillary expander for dento-facial application. Journal of Biomechanics, 40 (2). p. 459. ISSN 0021-9290,
Shasmin, H.N. and Abu Osman, Noor Azuan and Latif, L.A. and Usman, J. and Wan Abas, Wan Abu Bakar (2007) A new pylon materials in transtibial prosthesis: a preliminary study. Journal of Biomechanics, 40 (2). p. 297. ISSN 0021-9290,
Shasmin, H.N. and Abu Osman, Noor Azuan and Razali, R. and Usman, J. and Wan Abas, Wan Abu Bakar (2007) A preliminary study of acceptable load carriage for primary school children. 3rd Kuala Lumpur International Conference on Biomedical Engineering 2006. pp. 171-174.
Shasmin, Hanie Nadia and Abu Osman, Noor Azuan and Razali, R. and Usman, Juliana and Wan Abas, Wan Abu Bakar (2007) The effect of load carriage among primary school boys: a preliminary study. Journal of Mechanics in Medicine and Biology, 7 (3). pp. 265-274. ISSN 0219-5194, DOI https://doi.org/10.1142/S0219519407002285.
Shirazi, M.R. and Harun, Sulaiman Wadi and Thambiratnam, K. and Biglary, Mozhgun and Ahmad, Harith (2007) New Brillouin fiber laser configuration with high output power. Microwave and Optical Technology Letters, 49 (11). pp. 2656-2658. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.22805.
Snow, B.D. and Adikan, Faisal Rafiq Mahamd and Gates, J.C. and Gawith, C.B.E. and Dyadyusha, A. and Kaczmarek, M. and Smith, P.G.R. (2007) Line defects and temperature effects in liquid crystal tunable planar Bragg gratings. Optics Express, 15 (25). pp. 17129-17135. ISSN 1094-4087,
Taufiq, B.N. and Masjuki, Haji Hassan and Mahlia, T.M.I. and Amalina, M.A. and Faizul, M.S. and Saidur, Rahman (2007) Exergy analysis of evaporative cooling for reducing energy use in a Malaysian building. Desalination, 209 (1-3). pp. 238-243. ISSN 0011-9164,
Taufiq, B.N. and Masjuki, Haji Hassan and Mahlia, T.M.I. and Saidur, Rahman and Faizul, M.S. and Niza Mohamad, E. (2007) Second law analysis for optimal thermal design of radial fin geometry by convection. Applied Thermal Engineering, 27 (8-9). pp. 1363-1370. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2006.10.024.
Thitiyasook, Piyanuch and Kittisupakorn, Paisan and Hussain, Mohd Azlan (2007) Dual-mode control with neural network based inverse model for a steel pickling process. Asia-Pacific Journal of Chemical Engineering, 2 (6). pp. 536-543. ISSN 1932-2135, DOI https://doi.org/10.1002/apj.98.
Uning, R. and Abu Osman, Noor Azuan and Usman, J. and Wan Abas, Wan Abu Bakar (2007) Fractal characterization of gait in parkinson's disease using detrended fluctuation analysis. Journal of Biomechanics, 40 (2). p. 82. ISSN 0021-9290,
Wahab, Ahmad Khairi Abdul and Hussain, Mohd Azlan and Omer, Rosli (2007) Temperature control of a pilot plant reactor system using a genetic algorithm model‐based control approach. Asia-Pacific Journal of Chemical Engineering, 2 (6). pp. 526-535. ISSN 1932-2135, DOI https://doi.org/10.1002/apj.97.
Wang, J.G. and Karim, M.R. and Lin, P.Z. (2007) Analysis of seabed instability using element free Galerkin method. Ocean Engineering, 34 (2). pp. 247-260. ISSN 0029-8018, DOI https://doi.org/10.1016/j.oceaneng.2006.01.004.
Wei, N.C. and Hussain, Mohd Azlan and Wahab, Ahmad Khairi Abdul (2007) Control of a batch polymerization system using hybrid neural network first principle model. Canadian Journal of Chemical Engineering, 85 (6). pp. 936-945. ISSN 0008-4034,
Yin, C.Y. and Aroua, M.K. and Daud, W.M.A.W. (2007) Impregnation of palm shell activated carbon with polyethyleneimine and its effects on Cd2+ adsorption. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 307 (1-3). pp. 128-136. ISSN 0927-7757, DOI https://doi.org/10.1016/j.colsurfa.2007.05.012.
Yin, C.Y. and Aroua, M.K. and Daud, W.M.A.W. (2007) Review of modifications of activated carbon for enhancing contaminant uptakes from aqueous solutions. Separation and Purification Technology, 52 (3). pp. 403-415. ISSN 1383-5866, DOI https://doi.org/10.1016/j.seppur.2006.06.009.
Yin, C.Y. and Aroua, Mohamed Kheireddine and Daud, Wan Mohd Ashri Wan (2007) Modification of granular activated carbon using low molecular weight polymer for enhanced removal of Cu2+ from aqueous solution. Water Science and Technology, 56 (9). pp. 95-101. ISSN 0273-1223, DOI https://doi.org/10.2166/wst.2007.682.
Zakaria, Hidayatul Aini and Kadri, Nahrizul Adib (2007) Development of wireless patient data management system. Journal of Sustainability Science and Management, 2 (1). pp. 86-89. ISSN 1823-8556,
Abdullah, M.K. and Abdalla, M.F. and Abas, A.F. and Amouzad, G. (2007) Duty-cycle division multiplexing (DCDM): a novel and economical optical multiplexing and electrical demultiplexing technique for high speed fiber optics networks. In: Wireless and Optical Communications Networks, 2007. WOCN'07. IFIP International Conference on, 2007.
Abdullah, M.K. and Mahdiraji, G.A. and Elhag, M.F. (2007) A new duty cycle based digital multiplexing technique. In: Telecommunications and Malaysia International Conference on Communications, 2007. ICT-MICC 2007. IEEE International Conference on, 2007.
Fariborzi, H. and Moghavvemi, M. (2007) Architecture of a wireless sensor network for vital signs transmission in hospital setting. In: 2nd International Conference on Convergent Information Technology, ICCIT 07, 21 - 23 November 2007, Gyongju, South Korea..
Fariborzi, H. and Moghavvemi, M. and Mehrkanoon, S. (2007) Design of a low-power microcontroller-based wireless ECG monitoring system. In: 2007 5th Student Conference on Research and Development, SCORED , 11-12 December 2007, Selangor, Malaysia.
Fariborzi, H. and Moghavvemi, M. and Mehrkanoon, S. (2007) The design of an intelligent wireless sensor network for ubiquitous healthcare. In: 2007 International Conference on Intelligent and Advanced Systems, ICIAS 2007 , 25 - 28 November 2007, Kuala Lumpur, Malaysia..
Ibrahim, F. and Chae, J.H. and Arifin, N. and Zarmani, N.M. and Cho, J. (2007) EMG analysis of facial muscles exercise using oral cavity rehabilitative device. In: 2006 IEEE Region 10 Conference, TENCON 2006, 2007, Hong Kong.
Kadir, M.N.A. and Mekhilef, Saad and Hew, W.P. (2007) Comparison of basic direct torque control designs for permanent magnet synchronous motor. In: 7th International Conference on Power Electronics and Drive Systems, PEDS 2007, Bangkok.
Karim, M.R. and Wei, S. (2007) Antenna arrays in multi-user detection of spread spectrum signals. In: Department of Civil Engineering, Faculty of Engineering Building, University of Malaya, 50603 Kuala Lumpur, MALAYSIA, 2007, Orlando, FL.
Leow, R.S. and Ibrahim, F. and Moghavvemi, M. (2007) Development of a steady state visual evoked potential (SSVEP)-based brain computer interface (BCI) system. In: 2007 International Conference on Intelligent and Advanced Systems, ICIAS 2007, 2007, Kuala Lumpur.
Mahdiraji, G.A. and Abdullah, M.K. and Elhag, M.F. and Abas, A.F. and Zahedi, E. and Mokhtar, M. (2007) Duty cycle division multiplexing technique for wireless communications. In: Wireless and Optical Communications Networks, 2007. WOCN'07. IFIP International Conference on, 2007.
Mehrkanoon, S. and Moghavvemi, M. and Fariborzi, H. (2007) Real time De-mixing system based on LMS adaptive algorithm for blind two source signals separation. In: 2007 5th Student Conference on Research and Development, SCORED, 11 - 12 December 2007, Selangor, Malaysia.
Mehrkanoon, S. and Moghavvemi, M. and Fariborzi, H. (2007) Real time ocular and facial muscle artifacts removal from EEG signals using LMS adaptive algorithm. In: 2007 International Conference on Intelligent and Advanced Systems, ICIAS 2007, 25 - 28 November 2007, Kuala Lumpur, Malaysia.
Mokhlis, Hazlie and Li, H.Y. (2007) Fault location estimation for distribution system using simulated voltage sags data. In: Universities Power Engineering Conference, 2007. UPEC 2007. 42nd International, 2007.
Muhammad, K.S. and Omar, A.M. and Mekhilef, Saad (2007) Digital control of high DC voltage converter based on cockcroft walton voltage multiplier circuit. In: TENCON 2005 - 2005 IEEE Region 10 Conference, Melbourne.
Rahim, H.A. and Ibrahim, F. and Taib, M.N. (2007) A novel prediction system in dengue fever using NARMAX model. In: International Conference on Control, Automation and Systems, ICCAS 2007, 2007, Seoul.
Rahim, N.A. and Mekhilef, Saad and Islam, Z. (2007) A new approach for harmonic compensation using single- Phase hybrid active power filter. In: TENCON 2005 - 2005 IEEE Region 10 Conference, Melbourne.
Sattar, M.A. and Saidur, Rahman and Masjuki, Haji Hassan (2007) Performance investigation of domestic refrigerator using pure hydrocarbons and blends of hydrocarbons as refrigerants. In: Proceedings of World Academy of Science, Engineering and Technology, 2007.
Sreedharan, G. and Moghavvemi, M. (2007) Real time security assessment in national load despatch centre, Tenaga Nasional Berhad, Malaysia. In: 3rd IASTED Asian Conference on Power and Energy Systems, AsiaPES 2007, 2 - 4 April 2007, Phuket, Thailand.
Tan, Y.Q. and Ibrahim, Fatimah and Moghavvemi, Mahmoud (2007) Two electrodes low voltage input EEG amplifier for brain-computer-interface. In: International Conference on Intelligent and Advanced Systems (ICIAS 2007), 25-28 November 2007, Kuala Lumpur.
Tarek, M. and Mekhilef, Saad and Rahim, N.A. (2007) Application of adaptive notch filter for harmonics currents estimation. In: 8th International Power Engineering Conference, IPEC 2007, Singapore.
Misran, H. and Yarmo, M.A. and Singh, R. (2007) Hydrocarbon templated sol-gel synthesis and characterizations of mesoporous silica xerogel. Studies in Surface Science and Catalysis, 165 . Engineering, pp. 21-24.
