 | Up a level |
Liu, Jingjing and Naeem, Muhammad Awais and Al Kouzbary, Mouaz and Al Kouzbary, Hamza and Shasmin, Hanie Nadia and Arifin, Nooranida and Abd Razak, Nasrul Anuar and Abu Osman, Noor Azuan (2023) Effect of infill parameters on the compressive strength of 3d-printed nylon-based material. Polymers, 15 (2). ISSN 2073-4360, DOI https://doi.org/10.3390/polym15020255.
Al Kouzbary, Hamza and Al Kouzbary, Mouaz and Tham, Lai Kuan and Liu, Jingjing and Shasmin, Hanie Nadia and Abu Osman, Noor Azuan (2022) Generating an adaptive and robust walking pattern for a prosthetic ankle-foot by utilizing a nonlinear autoregressive network with exogenous inputs. IEEE Transactions on Neural Networks and Learning Systems, 33 (11). pp. 6297-6305. ISSN 2162-237X, DOI https://doi.org/10.1109/TNNLS.2021.3076060.
Ibrahim, Norzuria and Abu Osman, Noor Azuan and Mokhtar, Abdul Halim and Arifin, Nooranida and Usman, Juliana and Shasmin, Hanie Nadia (2022) Contribution of the arm segment rotations towards the horizontal ball and racket head velocities during forehand long shot and drop shot services in table tennis. Sports Biomechanics, 21 (9). pp. 1065-1081. ISSN 1476-3141, DOI https://doi.org/10.1080/14763141.2020.1726995.
Al Kouzbary, Mouaz and Al Kouzbary, Hamza and Liu, Jingjing and Khamis, Taha and Al-Hashimi, Zaina and Shasmin, Hanie Nadia and Arifin, Nooranida and Abu Osman, Noor Azuan (2022) Robotic knee prosthesis with cycloidal gear and four-bar mechanism optimized using particle swarm algorithm. Actuators, 11 (9). ISSN 2076-0825, DOI https://doi.org/10.3390/act11090253.
Musa, Rabiu Muazu and Hassan, Isyaku and Abdullah, Mohamad Razali and Azmi, Mohd Nazri Latiff and Majeed, Anwar P. P. Abdul and Abu Osman, Noor Azuan (2022) A longitudinal analysis of injury characteristics among elite and amateur tennis players at different tournaments from electronic newspaper reports. Frontiers in Public Health, 10. ISSN 2296-2565, DOI https://doi.org/10.3389/fpubh.2022.835119.
Liu, Jingjing and Abu Osman, Noor Azuan and Al Kouzbary, Mouaz and Al Kouzbary, Hamza and Abd Razak, Nasrul Anuar and Shasmin, Hanie Nadia and Arifin, Nooranida (2022) Stiffness estimation of planar spiral spring based on Gaussian process regression. Scientific Reports, 12 (1). ISSN 2045-2322, DOI https://doi.org/10.1038/s41598-022-15421-1.
Ngah, Abdul Hafaz and Kamalrulzaman, Nurul Izni and Mohamad, Mohamad Firdaus Halimi and Abdul Rashid, Rosyati and Harun, Nor Omaima and Ariffin, Nur Asma and Abu Osman, Noor Azuan (2022) The sequential mediation model of students’ willingness to continue online learning during the COVID-19 pandemic. Research and Practice in Technology Enhanced Learning, 17 (1). ISSN 1793-7078, DOI https://doi.org/10.1186/s41039-022-00188-w.
Liu, Jingjing and Abu Osman, Noor Azuan and Al Kouzbary, Mouaz and Al Kouzbary, Hamza and Abd Razak, Nasrul Anuar and Shasmin, Hanie Nadia and Arifin, Nooranida (2022) Optimization and comparison of typical elastic actuators in powered ankle-foot prosthesis. International Journal of Control Automation and Systems, 20 (1). pp. 232-242. ISSN 1598-6446, DOI https://doi.org/10.1007/s12555-020-0980-x.
Sobh, Khaled Nedal Mahmoud and Abd Razak, Nasrul Anuar and Abu Osman, Noor Azuan (2022) A FSR sensor cuff to measure muscle activation during strength and gait cycle for lower limb. IEEE Access, 10. pp. 106135-106147. ISSN 2169-3536, DOI https://doi.org/10.1109/ACCESS.2022.3207497.
Ngah, Abdul Hafaz and Abdul Rashid, Rosyati and Ariffin, Nur Asma and Ibrahim, Fauzayani and Abu Osman, Noor Azuan and Kamalrulzaman, Nurul Izni and Mohamad, Mohamad Firdaus Halimi and Harun, Nor Omaima (2022) Fostering students’ attitude towards online learning: The mediation effect of satisfaction and perceived performance. Lecture Notes in Networks and Systems, 299. 290 – 302. ISSN 2367-3370, DOI https://doi.org/10.1007/978-3-030-82616-1_26.
Musa, Rabiu Muazu and Hassan, Isyaku and Abdullah, Mohamad Razali and Azmi, Mohd Nazri Latiff and P. P. Abdul Majeed, Anwar and Abu Osman, Noor Azuan (2021) Surveillance of injury types, locations, and intensities in male and female tennis players: A content analysis of online newspaper reports. International Journal of Environmental Research and Public Health, 18 (23). ISSN 1660-4601, DOI https://doi.org/10.3390/ijerph182312686.
Mohd Safee, Mohd Khairuddin and Abu Osman, Noor Azuan (2021) Effect of lower limb muscle fatigue on fall risk for transfemoral amputee: A pilot study. Occupational Therapy International, 2021. ISSN 0966-7903, DOI https://doi.org/10.1155/2021/4357473.
Nizam, Mohamed Afifuddeen Bin Mohamed and Abd Razak, Nasrul Anuar and Abu Osman, Noor Azuan (2021) Biomechanical analysis of an improvement of prosthetic liner using polyurethane focusing at the anterior-distal part of residual limb: A case study. Sains Malaysiana, 50 (9). pp. 2713-2725. ISSN 0126-6039, DOI https://doi.org/10.17576/jsm-2021-5009-18.
Abdullah, Muhammad Amirul and Ibrahim, Muhammad Ar Rahim and Shapiee, Muhammad Nur Aiman and Zakaria, Muhammad Aizzat and Razman, Mohd Azraai Mohd and Musa, Rabiu Muazu and Abu Osman, Noor Azuan and Majeed, Anwar P. P. Abdul (2021) The classification of skateboarding tricks via transfer learning pipelines. PeerJ Computer Science, 7. ISSN 2376-5992, DOI https://doi.org/10.7717/peerj-cs.680.
Tripathy, Ashis and Sharma, Priyaranjan and Pramanik, Sumit and Silva, Filipe Samuel and Abu Osman, Noor Azuan (2021) Armalcolite nanocomposite: A new paradigm for flexible capacitive humidity sensor. IEEE Sensors Journal, 21 (13). pp. 14685-14692. ISSN 1530-437X, DOI https://doi.org/10.1109/JSEN.2021.3072162.
Sobh, Khaled Nedal Mahmoud and Abd Razak, Nasrul Anuar and Abu Osman, Noor Azuan (2021) Investigation of EMG parameter for transtibial prosthetic user with flexion and extension of the knee and normal walking gait: A preliminary study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 235 (4). pp. 419-427. ISSN 0954-4119, DOI https://doi.org/10.1177/0954411920985753.
Tham, Lai Kuan and Abu Osman, Noor Azuan and Al Kouzbary, Mouaz and Aminian, Kamiar (2021) Biomechanical ambulatory assessment of 3D knee angle using novel inertial sensor-based technique. IEEE Access, 9. pp. 36559-36570. ISSN 2169-3536, DOI https://doi.org/10.1109/ACCESS.2021.3062978.
Liu, Jingjing and Abu Osman, Noor Azuan and Al Kouzbary, Mouaz and Al Kouzbary, Hamza and Abd Razak, Nasrul Anuar and Shasmin, Hanie Nadia and Arifin, Nooranida (2021) Classification and comparison of mechanical design of powered ankle-foot prostheses for transtibial amputees developed in the 21st Century: A systematic review. Journal of Medical Devices-Transactions of the ASME, 15 (1). ISSN 1932-6181, DOI https://doi.org/10.1115/1.4049437.
Hashim, Nur Afiqah and Abd Razak, Nasrul Anuar and Abu Osman, Noor Azuan (2021) Comparison of conventional and virtual reality box and blocks tests in upper limb amputees: A case-control study. IEEE Access, 9. pp. 76983-76990. ISSN 2169-3536, DOI https://doi.org/10.1109/ACCESS.2021.3072988.
Hashim, Nur Afiqah and Abd Razak, Nasrul Anuar and Gholizadeh, Helia and Abu Osman, Noor Azuan (2021) Video game-based rehabilitation approach for individuals who have undergone upper limb amputation: Case-control study. JMIR Serious Games, 9 (1). ISSN 2291-9279, DOI https://doi.org/10.2196/17017.
Mok, Chun Fah and Ching, Yern Chee and Abu Osman, Noor Azuan and Muhamad, Farina and Hai, Nguyen Dai and Choo, J. H. and Che Hassan, Che Rosmani (2020) Adsorbents for removal of cationic dye: Nanocellulose reinforced biopolymer composites. Journal of Polymer Research, 27 (12). ISSN 1022-9760, DOI https://doi.org/10.1007/s10965-020-02347-3.
Mok, Chun Fah and Ching, Yern Chee and Muhamad, Farina and Abu Osman, Noor Azuan and Hai, Nguyen Dai and Che Hassan, Che Rosmani (2020) Adsorption of dyes using Poly(vinyl alcohol) (PVA) and PVA-based polymer composite adsorbents: A review. Journal of Polymers and the Environment, 28 (3). pp. 775-793. ISSN 1566-2543, DOI https://doi.org/10.1007/s10924-020-01656-4.
Ahmad, Asliza and Abu Osman, Noor Azuan and Mokhtar, Abdul Halim and Mehmood, Waqas and Kadri, Nahrizul Adib (2019) Analysis of the interface pressure exerted by the Chêneau brace in patients with double-curve adolescent idiopathic scoliosis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 233 (9). pp. 901-908. ISSN 0954-4119, DOI https://doi.org/10.1177/0954411919856144.
Mehmood, Waqas and Abd Razak, Nasrul Anwar and Lau, M.S. and Chung, Tze Yang and Gholizadeh, Hossein and Abu Osman, Noor Azuan (2019) Comparative study of the circumferential and volumetric analysis between conventional casting and three-dimensional scanning methods for transtibial socket: A preliminary study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 233 (2). pp. 181-192. ISSN 0954-4119, DOI https://doi.org/10.1177/0954411918816124.
Sakeran, Hamzah and Abu Osman, Noor Azuan and Abdul Majid, Mohd Shukry and Rahiman, Mohd Hafiz Fazalul and Wan Muhamad, Wan Zuki Azman and Mustafa, Wan Azani (2019) Gait Analysis and Mathematical Index-Based Health Management Following Anterior Cruciate Ligament Reconstruction. Applied Sciences, 9 (21). p. 4680. ISSN 2076-3417, DOI https://doi.org/10.3390/app9214680.
Sakeran, Hamzah and Abu Osman, Noor Azuan and Abdul Majid, Mohd Shukry (2019) Gait Classification Using Mahalanobis–Taguchi System for Health Monitoring Systems Following Anterior Cruciate Ligament Reconstruction. Applied Sciences, 9 (16). p. 3306. ISSN 2076-3417, DOI https://doi.org/10.3390/app9163306.
Touri, Maria and Moztarzadeh, Fathollah and Abu Osman, Noor Azuan and Dehghan, Mohammad Mehdi and Mozafari, Masoud (2019) Optimisation and biological activities of bioceramic robocast scaffolds provided with an oxygen-releasing coating for bone tissue engineering applications. Ceramics International, 45 (1). pp. 805-816. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2018.09.247.
Touri, Maria and Moztarzadeh, Fathollah and Abu Osman, Noor Azuan and Dehghan, Mohammad Mehdi and Mozafari, Masoud (2018) 3D–printed biphasic calcium phosphate scaffolds coated with an oxygen generating system for enhancing engineered tissue survival. Materials Science and Engineering: C, 84. pp. 236-242. ISSN 0928-4931, DOI https://doi.org/10.1016/j.msec.2017.11.037.
Ghazali, Mohd Fazli and Razak, Nasrul Anuar Abd and Abu Osman, Noor Azuan and Gholizadeh, Hossein (2018) Awareness, potential factors, and post-amputation care of stump flexion contractures among transtibial amputees. Turkish Journal of Physical Medicine and Rehabilitation, 64 (3). pp. 268-276. ISSN 2587-0823, DOI https://doi.org/10.5606/tftrd.2018.1668.
Khan, Saad Jawaid and Khan, Soobia Saad and Usman, Juliana and Mokhtar, Abdul Halim and Abu Osman, Noor Azuan (2018) Combined effects of knee brace, laterally wedged insoles and toe-in gait on knee adduction moment and balance in moderate medial knee osteoarthritis patients. Gait & Posture, 61. pp. 243-249. ISSN 0966-6362, DOI https://doi.org/10.1016/j.gaitpost.2018.01.024.
Khan, Saad Jawaid and Khan, Soobia Saad and Usman, Juliana and Mokhtar, Abdul Halim and Abu Osman, Noor Azuan (2018) Effects of different foot progression angles and platform settings on postural stability and fall risk in healthy and medial knee osteoarthritic adults. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 232 (2). pp. 163-171. ISSN 0954-4119, DOI https://doi.org/10.1177/0954411917750409.
Shaari, Ida Hasni and Abu Osman, Noor Azuan and Shasmin, Hanie Nadia (2018) Interface Pressure of Lycra Orthosis at Different Postures in Children with Cerebral Palsy (CP). Sains Malaysiana, 47 (4). pp. 763-771. ISSN 0126-6039, DOI https://doi.org/10.17576/jsm-2018-4704-15.
Asadi-Eydivand, Mitra and Solati-Hashjin, Mehran and Abu Osman, Noor Azuan (2018) Mechanical behavior of calcium sulfate scaffold prototypes built by solid free-form fabrication. Rapid Prototyping Journal, 24 (8). pp. 1392-1400. ISSN 1355-2546, DOI https://doi.org/10.1108/RPJ-06-2015-0077.
Tripathy, Ashis and Sharma, Priyaranjan and Sahoo, Narayan and Pramanik, Sumit and Abu Osman, Noor Azuan (2018) Moisture sensitive inimitable Armalcolite/PDMS flexible sensor: A new entry. Sensors and Actuators B: Chemical, 262. pp. 211-220. ISSN 0925-4005, DOI https://doi.org/10.1016/j.snb.2018.01.207.
Al Kouzbary, Mouaz and Abu Osman, Noor Azuan and Wahab, Ahmad Khairi Abdul (2018) Sensorless control system for assistive robotic ankle-foot. International Journal of Advanced Robotic Systems, 15 (3). p. 172988141877585. ISSN 1729-8814, DOI https://doi.org/10.1177/1729881418775854.
Tripathy, Ashis and Pramanik, Sumit and Manna, Ayan and Radzi, Zamri and Abu Osman, Noor Azuan (2017) Dielectric and AC conductivity studies of novel porous armalcolite nanocomposite-based humidity sensor. Journal of the American Ceramic Society, 100 (11). pp. 5131-5140. ISSN 0002-7820, DOI https://doi.org/10.1111/jace.15033.
Al-Fakih, E.A. and Abu Osman, Noor Azuan and Adikan, Faisal Rafiq Mahamd and Eshraghi, A. and Jahanshahi, P. (2016) Development and Validation of Fiber Bragg Grating Sensing Pad for Interface Pressure Measurements Within Prosthetic Sockets. IEEE Sensors Journal, 16 (4). pp. 965-974. ISSN 1530-437X, DOI https://doi.org/10.1109/JSEN.2015.2495323.
Asadi-Eydivand, M. and Solati-Hashjin, M. and Farzad, A. and Abu Osman, Noor Azuan (2016) Effect of technical parameters on porous structure and strength of 3D printed calcium sulfate prototypes. Robotics and Computer-Integrated Manufacturing, 37. pp. 57-67. ISSN 0736-5845, DOI https://doi.org/10.1016/j.rcim.2015.06.005.
Asadi-Eydivand, M. and Solati-Hashjin, M. and Fathi, A. and Padashi, M. and Abu Osman, Noor Azuan (2016) Optimal design of a 3D-printed scaffold using intelligent evolutionary algorithms. Applied Soft Computing, 39. pp. 36-47. ISSN 1568-4946, DOI https://doi.org/10.1016/j.asoc.2015.11.011.
Asadi-Eydivand, M. and Solati-Hashjin, M. and Shafiei, S.S. and Mohammadi, S. and Hafezi, M. and Abu Osman, Noor Azuan (2016) Structure, properties, and in vitro behavior of heat-treated calcium sulfate scaffolds fabricated by 3D printing. PLoS ONE, 11 (3). e0151216. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0151216.
Ku, P.X. and Abu Osman, Noor Azuan and Wan Abas, W.A.B. (2016) The limits of stability and muscle activity in middle-aged adults during static and dynamic stance. Journal of Biomechanics, 49 (16). pp. 3943-3948. ISSN 0021-9290, DOI https://doi.org/10.1016/j.jbiomech.2016.11.006.
Oshkour, Azim Ataollahi and Pramanik, Sumit and Mehrali, Mehdi and Yau, Yat Huang and Tarlochan, Faris and Abu Osman, Noor Azuan (2015) Mechanical and physical behavior of newly developed functionally graded materials and composites of stainless steel 316L with calcium silicate and hydroxyapatite. Journal of the Mechanical Behavior of Biomedical Materials, 49. pp. 321-331. ISSN 1751-6161, DOI https://doi.org/10.1016/j.jmbbm.2015.05.020.
Farzadi, A. and Waran, V. and Solati-Hashjin, M. and Rahman, Z.A.A. and Asadi, M. and Abu Osman, Noor Azuan (2015) Effect of layer printing delay on mechanical properties and dimensional accuracy of 3D printed porous prototypes in bone tissue engineering. Ceramics International, 41 (7). pp. 8320-8330. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2015.03.004.
Ataollahi, F. and Pramanik, S. and Moradi, A. and Dalilottojari, A. and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan (2015) Endothelial cell responses in terms of adhesion, proliferation, and morphology to stiffness of polydimethylsiloxane elastomer substrates. Journal of Biomedical Materials Research Part A, 103 (7). pp. 2203-2213. ISSN 1549-3296, DOI https://doi.org/10.1002/jbm.a.35186.
Arifin, N. and Abu Osman, Noor Azuan and Ali, S. and Gholizadeh, H. and Wan Abas, Wan Abu Bakar (2015) Evaluation of postural steadiness in below-knee amputees when wearing different prosthetic feet during various sensory conditions using the biodex (R) stability system. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 229 (7). pp. 491-498. ISSN 0954-4119, DOI https://doi.org/10.1177/0954411915587595.
Oshkour, A.A. and Talebi, H. and Shirazi, S.F.S. and Yau, Y.H. and Pramanik, S. and Tarlochan, F. and Abu Osman, Noor Azuan (2015) Parametric study of radial functionally graded femoral prostheses with different geometries. Meccanica, 50 (7). pp. 1657-1678. ISSN 0025-6455, DOI https://doi.org/10.1007/s11012-015-0121-4.
Ghavimi, S.A.A. and Ebrahimzadeh, M.H. and Solati-Hashjin, M. and Abu Osman, Noor Azuan (2015) Polycaprolactone/starch composite: Fabrication, structure, properties, and applications. Journal of Biomedical Materials Research Part A, 103 (7). pp. 2482-2498. ISSN 1549-3296, DOI https://doi.org/10.1002/jbm.a.35371.
Chan, B.T. and Lim, Einly and Ong, C.W. and Abu Osman, Noor Azuan (2015) Effect of spatial inlet velocity profiles on the vortex formation pattern in a dilated left ventricle. Computer Methods in Biomechanics and Biomedical Engineering, 18 (1). pp. 90-96. ISSN 1025-5842, DOI https://doi.org/10.1080/10255842.2013.779683.
Rakib, Muhammad Iftekharul and Choudhury, Imtiaz Ahmed and Hussain, Sajjad and Abu Osman, Noor Azuan (2015) Design and biomechanical performance analysis of a user-friendly orthotic device. Materials & Design, 65. pp. 716-725. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2014.09.075.
Eshraghi, A. and Abu Osman, Noor Azuan and Gholizadeh, H. and Ali, S. and Wan Abas, Wan Abu Bakar (2015) Interface stress in socket/residual limb with transtibial prosthetic suspension systems during locomotion on slopes and stairs. American Journal of Physical Medicine & Rehabilitation, 94 (1). pp. 1-10. ISSN 0894-9115, DOI https://doi.org/10.1097/PHM.0000000000000134.
Asadi-Eydivand, Mitra and Ebadzadeh, Mohammad Mehdi and Solati-Hashjin, Mehran and Darlot, Christian and Abu Osman, Noor Azuan (2015) Cerebellum-inspired neural network solution of the inverse kinematics problem. Biological Cybernetics, 109 (6). pp. 561-574. ISSN 0340-1200, DOI https://doi.org/10.1007/s00422-015-0661-7.
Shirazi, F.S. and Mehrali, M. and Oshkour, A.A. and Metselaar, H.S.C. and Kadri, Nahrizul Adib and Abu Osman, Noor Azuan (2015) Characterization and mechanical properties of calcium silicate/citric acid-based polymer composite materials. International Journal of Applied Ceramic Technology, 12 (2). pp. 371-376. ISSN 1546-542X, DOI https://doi.org/10.1111/Ijac.12151.
Abd Razak, N.A. and Abu Osman, Noor Azuan and Ali, S. and Gholizadeh, H. and Wan Abas, Wan Abu Bakar (2015) Comparison study of the prosthetics interface pressure profile of air splint socket and ICRC polypropylene socket for upper limb prosthetics. Biocybernetics and Biomedical Engineering, 35 (2). pp. 100-105. ISSN 0208-5216, DOI https://doi.org/10.1016/j.bbe.2014.08.003.
Khalaj, N. and Abu Osman, Noor Azuan and Mokhtar, A.H. and Wan Abas, W.A.B. (2014) Postural stability and pain in obese ladies with mild knee osteoarthritis after intra-articular hyalgan injection. Osteoarthritis and Cartilage, 22 (Supp.). S100-S101. ISSN 1063-4584, DOI https://doi.org/10.1016/j.joca.2014.02.191.
Gholizadeh, H. and Salehi, H. and Embi, M.A. and Danaee, M. and Motahar, S.M. and Ale Ebrahim, N. and Tanha, F.H. and Abu Osman, Noor Azuan (2014) Relationship among economic growth, internet usage and publication productivity: comparison among ASEAN and world's best countries. Modern Applied Science, 8 (2). pp. 160-170. ISSN 1913-1852, DOI https://doi.org/10.5539/mas.v8n2p160.
Khalaj, N. and Abu Osman, Noor Azuan and Mokhtar, A.H. and Mehdikhani, M. and Wan Abas, W.A.B. (2014) Balance and Risk of Fall in Individuals with Bilateral Mild and Moderate Knee Osteoarthritis. PLoS ONE, 9 (3). e92270. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0092270.
Khalaj, N. and Abu Osman, Noor Azuan and Mokhtar, A.H. and Mehdikhani, M. and Wan Abas, W.A.B. (2014) Effect of exercise and gait retraining on knee adduction moment in people with knee osteoarthritis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228 (2). pp. 190-199. ISSN 0954-4119, DOI https://doi.org/10.1177/0954411914521155.
Ku, P.X. and Abu Osman, Noor Azuan and Wan Abas, W.A.B. (2014) Balance control in lower extremity amputees during quiet standing: a systematic review. Gait and Posture, 39 (2). pp. 672-682. ISSN 09666362 , DOI https://doi.org/10.1016/j.gaitpost.2013.07.006.
Khalaj, N. and Abu Osman, Noor Azuan and Mokhtar, A.H. and George, J. and Wan Abas, W.A.B. (2014) Effect of Intra-Articular Hyaluronic Injection on Postural Stability and Risk of Fall in Patients with Bilateral Knee Osteoarthritis. Scientific World Journal, 2014. pp. 1-6. ISSN 2356-6140, DOI https://doi.org/10.1155/2014/815184.
Gholizadeh, H. and Abu Osman, Noor Azuan and Eshraghi, A. and Ali, S. and Arifin, N. and Wan Abas, Wan Abu Bakar (2014) Evaluation of new suspension system for limb prosthetics. BioMedical Engineering OnLine, 13 (1). pp. 1-13. ISSN 1475-925X, DOI https://doi.org/10.1186/1475-925X-13-1.
El-Sayed, Amr M. and Hamzaid, Nur Azah and Abu Osman, Noor Azuan (2014) Piezoelectric bimorphs' characteristics as in-socket sensors for transfemoral amputees. Sensors, 14 (12). pp. 23724-23741. ISSN 1424-8220, DOI https://doi.org/10.3390/s141223724.
Abd Razak, N.A. and Abu Osman, Noor Azuan and Kamyab, M. and Wan Abas, W.A.B. and Gholizadeh, H. (2014) Satisfaction and problems experienced with wrist movements: comparison between a common body-powered prosthesis and a new biomechatronics prosthesis. American Journal of Physical Medicine & Rehabilitation. ISSN 0894-9115, DOI https://doi.org/10.1097/PHM.0b013e3182a51fc2.
Eshraghi, A. and Abu Osman, Noor Azuan and Gholizadeh, H. and Ali, S. and Shadgan, B. (2013) 100 top-cited scientific papers in limb prosthetics. BioMedical Engineering OnLine, 12. p. 119. ISSN 1475-925X, (In Press)
Aboodarda, S.J. and Yusof, A. and Abu Osman, Noor Azuan and Thompson, M.W. and Mokhtar, A.H. (2013) Enhanced Performance With Elastic Resistance During the Eccentric Phase of a Countermovement Jump. International Journal of Sports Physiology and Performance, 8 (2). pp. 181-187. ISSN 1555-0265,
Bani Hashim, A.Y. and Abu Osman, Noor Azuan and Wan Abas, W.A.B. and Abdul Latif, L. (2013) Approximating the relationship among the degree of the reaction forces and the nodes on footprint during a stance phase. Applied Mathematical Modelling, 37 (1-2). pp. 258-264. ISSN 0307904X, DOI https://doi.org/10.1016/j.apm.2011.11.089.
Eshraghi, Arezoo and Abu Osman, Noor Azuan and Gholizadeh, Hossein and Ahmadian, Jalil and Rahmati, Bizhan and Wan Abas, Wan Abu Bakar (2013) Development and evaluation of new coupling system for lower limb prostheses with acoustic alarm system. Scientific Reports, 3. p. 2270. ISSN 2045-2322, DOI https://doi.org/10.1038/srep02270.
Ataollahi, F. and Mohri, M. and Seifi, H.A. and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan (2013) Evaluation of copper concentration in subclinical cases of white muscle disease and its relationship with cardiac troponin I. PLoS ONE, 8 (2). pp. 1-5. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0056163.
Oshkour, A.A. and Davoodi, M.M. and Abu Osman, Noor Azuan and Yau, Y.H. and Tarlochan, F. and Wan Abas, Wan Abu Bakar (2013) Finite element analysis of circumferential crack behavior in cement-femoral prosthesis interface. Materials & Design, 49. pp. 96-102. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2013.01.037.
Oshkour, Azim Ataollahi and Abu Osman, Noor Azuan and Davoodi, M.M. and Yau, Y.H. and Tarlochan, F. and Wan Abas, Wan Abu Bakar and Bayat, M. (2013) Finite element analysis on longitudinal and radial functionally graded femoral prosthesis. International Journal for Numerical Methods in Biomedical Engineering, 29 (12). pp. 1412-1427. ISSN 2040-7939, DOI https://doi.org/10.1002/cnm.2583.
Chandrasekhar, A. and Abu Osman, Noor Azuan and Tham, L.K. and Lim, K.S. and Wan Abas, Wan Abu Bakar (2013) Influence of age on patellar tendon reflex response. PLoS ONE, 8 (11). ISSN 1932-6203, DOI PMID: 24260483.
Ali, S. and Abu Osman, Noor Azuan and Eshraghi, A. and Gholizadeh, H. and Abd Razak, N.A.B. and Wan Abas, Wan Abu Bakar (2013) Interface pressure in transtibial socket during ascent and descent on stairs and its effect on patient satisfaction. Clinical Biomechanics, 28 (9-10). pp. 994-999. ISSN 02680033, DOI https://doi.org/10.1016/j.clinbiomech.2013.09.004.
Oshkour, A.A. and Abu Osman, Noor Azuan and Yau, Y.H. and Tarlochan, F. and Pramanik, S. and Wan Abas, Wan Abu Bakar (2013) Internal-external circumferential crack behaviour in the cement layer of total hip replacement. Fatigue & Fracture of Engineering Materials & Structures, 36 (7). pp. 586-601. ISSN 8756-758X, DOI https://doi.org/10.1111/Ffe.12026.
Abd Razak, N.A. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar (2013) Kinematic comparison of the wrist movements that are possible with a biomechatronics wrist prosthesis and a body-powered prosthesis: a preliminary study. Disability and Rehabilitation: Assistive Technology, 8 (3). pp. 255-260. ISSN 1748-3107, DOI https://doi.org/10.3109/17483107.2012.704654.
Makinejad, M.D. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Bayat, M. (2013) Preliminary analysis of knee stress in full extension landing. Clinics, 68 (9). pp. 1180-1188. ISSN 1807-5932, DOI https://doi.org/10.6061/clinics/2013(09)02.
Eshraghi, A. and Abu Osman, Noor Azuan and Gholizadeh, H. and Ali, S. and Sævarsson, S.K. and Wan Abas, Wan Abu Bakar (2013) An experimental study of the interface pressure profile during level walking of a new suspension system for lower limb amputees. Clinical Biomechanics, 28 (1). pp. 55-60. ISSN 0268-0033 , DOI https://doi.org/10.1016/j.clinbiomech.2012.10.002.
Tham, Lai Kuan and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Lim, Kheng Seang (2013) The validity and reliability of motion analysis in patellar tendon reflex assessment. PLoS ONE, 8 (2). e55702. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0055702.
Adikan, Faisal Rafiq Mahamd and Al-Fakih, E. and Abu Osman, Noor Azuan (2012) The use of fiber Bragg grating sensors in biomechanics and rehabilitation applications: the state-of-the-art and ongoing research topics. Sensors, 12 (10). pp. 12890-12926. ISSN 1424-8220, DOI https://doi.org/10.3390/s121012890.
Razman, R. and Cheong, J.P.G. and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan (2012) Anthropometric and strength characteristics of tenpin bowlers with different playing abilities. Biology of Sport, 29 (1). pp. 33-38. ISSN 10.5604/20831862.979853,
Bani Hashim, A.Y. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Abdul Latif, L. (2012) Approximating the relationship among the degree of the reaction forces and the nodes on footprint during a stance phase. Applied Mathematical Modelling. ISSN 0307-904X, DOI https://doi.org/10.1016/j.apm.2011.11.089.
Ku, Pei Xuan and Abu Osman, Noor Azuan and Yusof, Ashril and Wan Abas, Wan Abu Bakar (2012) Biomechanical evaluation of the relationship between postural control and body mass index. Journal of Biomechanics, 45 (9). pp. 1638-1642. ISSN 0021-9290, DOI https://doi.org/10.1016/j.jbiomech.2012.03.029.
Gholizadeh, Hossein and Abu Osman, Noor Azuan and Kamyab, Mojtaba and Eshraghi, Arezoo and Luviksdottir, Asa Gulaug and Wan Abas, Wan Abu Bakar (2012) Clinical evaluation of two prosthetic suspension systems in a bilateral transtibial amputee. American Journal of Physical Medicine & Rehabilitation, 91 (10). pp. 894-898. ISSN 0894-9115, DOI https://doi.org/10.1097/PHM.0b013e31823c74d7.
Ali, S. and Abu Osman, Noor Azuan and Mortaza, N. and Eshraghi, A. and Gholizadeh, H. and Wan Abas, Wan Abu Bakar (2012) Clinical investigation of the interface pressure in the trans-tibial socket with Dermo and Seal-In X5 liner during walking and their effect on patient satisfaction. Clinical Biomechanics, 27 (9). pp. 943-948. ISSN 0268-0033, DOI https://doi.org/10.1016/j.clinbiomech.2012.06.004.
Oshkour, A. and Abu Osman, Noor Azuan and Yau, Y. and Tarlochan, F. and Wan Abas, Wan Abu Bakar (2012) Design of new generation femoral prostheses using functionally graded materials: a finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. ISSN 0954-4119,
Davoodi, M.M. and Sapuan, S.M. and Aidy, Ali and Abu Osman, Noor Azuan and Oshkour, Azim Ataollahi and Wan Abas, Wan Abu Bakar (2012) Development process of new bumper beam for passenger car: a review. Materials & Design, 40. pp. 304-313. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2012.03.060.
Eshraghi, A. and Maroufi, N. and Sanjari, M.A. and Saeedi, H. and Keyhani, M.R. and Gholizadeh, H. and Abu Osman, Noor Azuan (2012) Effect of Milwaukee brace on static and dynamic balance of female hyperkyphotic adolescents. Prosthetics and Orthotics International. ISSN 0309-3646, DOI https://doi.org/10.1177/0309364612448805.
Safee, M.K.M. and Wan Abas, Wan Abu Bakar and Ibrahim, Fatimah and Abu Osman, Noor Azuan and Salahuddin, M.H.R. (2012) Electromyographic activity of the lower limb muscles during salat and specific exercises. Journal of Physical Therapy Science, 24 (6). pp. 549-552. ISSN 0915-5287,
Abd Razak, N.A. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar (2012) Kinematic comparison of the wrist movements that are possible with a biomechatronics wrist prosthesis and a body-powered prosthesis: a preliminary study. Disability and Rehabilitation: Assistive Technology (00). pp. 1-6. ISSN 1748-3107, DOI https://doi.org/10.3109/17483107.2012.704654.
Moo, E.K. and Herzog, W. and Han, S.K. and Abu Osman, Noor Azuan and Pingguan-Murphy, Belinda and Federico, S. (2012) Mechanical behaviour of in-situ chondrocytes subjected to different loading rates: a finite element study. Biomechanics and Modeling in Mechanobiology, 11 (7). pp. 983-993. ISSN 1617-7940,
Eshraghi, Arezoo and Abu Osman, Noor Azuan and Gholizadeh, Hossein and Karimi, Mohammad Hossein and Ali, Sadeeq (2012) Pistoning assessment in lower limb prosthetic sockets. Prosthetics and Orthotics International, 36 (1). pp. 15-24. ISSN 0309-3646, DOI https://doi.org/10.1177/0309364611431625.
Pramanik, Sumit and Pingguan-Murphy, Belinda and Abu Osman, Noor Azuan (2012) Progress of key strategies in development of electrospun scaffolds: bone tissue. Science and Technology of Advanced Materials, 13 (4). 043002. ISSN 1468-6996,
Ali, S. and Abu Osman, Noor Azuan and Naqshbandi, M.M. and Eshraghi, A. and Kamyab, M. and Gholizadeh, H. (2012) Qualitative study of prosthetic suspension systems on individuals with transtibial amputations aatisfaction and perceived problems with their prosthetic devices. Archives of Physical Medicine and Rehabilitation, 93 (11). pp. 1919-1923. ISSN 0003-9993, DOI https://doi.org/10.1016/j.apmr.2012.04.024.
Eshraghi, A. and Abu Osman, Noor Azuan and Karimi, M.T. and Gholizadeh, H. and Ali, S. and Wan Abas, Wan Abu Bakar (2012) Quantitative and qualitative comparison of a new prosthetic suspension system with two existing suspension systems for lower limb amputees. American Journal of Physical Medicine & Rehabilitation, 91 (12). pp. 1028-1038. ISSN 0894-9115, DOI https://doi.org/10.1097/PHM.0b013e318269d82a.
Dhakshyani, R. and Nukman, Y. and Abu Osman, Noor Azuan (2012) Rapid prototyping models for dysplastic hip surgeries in Malaysia. European Journal of Orthopaedic Surgery and Traumatology, 22 (1). pp. 41-46. ISSN 1633-8065, DOI https://doi.org/10.1007/s00590-011-0778-x.
Gholizadeh, Hossein and Abu Osman, Noor Azuan and Kamyab, Mojtaba and Eshraghi, Arezoo and Wan Abas, Wan Abu Bakar and Azam, M.N. (2012) Transtibial prosthetic socket pistoning: Static evaluation of Seal-In® X5 and Dermo® Liner using motion analysis system. Clinical Biomechanics, 27 (1). pp. 34-39. ISSN 0268-0033, DOI https://doi.org/10.1016/j.clinbiomech.2011.07.004.
Gholizadeh, H. and Abu Osman, Noor Azuan and Eshraghi, A. and Ali, S. and Sævarsson, S.K. and Wan Abas, Wan Abu Bakar and Pirouzi, G.H. (2012) Transtibial prosthetic suspension: less pistoning versus easy donning and doffing. Journal of Rehabilitation Research and Development, 49 (9). pp. 1321-1330. ISSN 0748-7711 , DOI https://doi.org/10.1682/JRRD.2011.11.0221.
Aboodarda, S.J. and Yosuf, A. and Abu Osman, Noor Azuan and Thompson, M.W. and Mokhtar, A.H. (2012) The contribution of elasticresistance during the eccentric phase of a countermovement jump enhances performance. International Journal of Sports Physiology and Performance. ISSN 1555-0265, DOI 22904117.
Ku, P.X. and Abu Osman, Noor Azuan and Yusof, A. and Wan Abas, Wan Abu Bakar (2012) The effect on human balance of standing with toe-extension. PLoS ONE, 7 (7). ISSN 1932-6203, DOI PMID: 22848523.
Al-Fakih, E. and Abu Osman, Noor Azuan and Adikan, Faisal Rafiq Mahamd (2012) The sse of fiber bragg grating sensors in biomechanics and rehabilitation applications: the state-of-the-art and ongoing research topics. Sensors, 12 (10). pp. 12890-12926. ISSN 1424-8220, DOI https://doi.org/10.3390/s121012890.
Amiri-Khorasani, M. and Abu Osman, Noor Azuan and Yusof, A. (2011) Acute effect of static and dynamic stretching on hip dynamic range of motion during instep kicking in professional soccer players. Journal of Strength and Conditioning Research, 25 (6). pp. 1647-1652. ISSN 1064-8011, DOI https://doi.org/10.1519/JSC.0b013e3181db9f41.
Amiri-Khorasani, M. and Abu Osman, Noor Azuan and Yusof, A. (2011) Biomechanical responses of thigh and lower leg during 10 consecutive soccer instep kicks. Journal of Strength and Conditioning Research, 25 (4). pp. 1177-1181. ISSN 1064-8011, DOI https://doi.org/10.1519/JSC.0b013e3181d6508c.
Eshraghi, A. and Gholizadeh, H. and Abu Osman, Noor Azuan (2011) Comments on "assessment of amputee socket-stump-residual bone kinematics during strenuous activities using Dynamic Roentgen stereogrammetric analysis". Journal of Biomechanics, 44 (16). pp. 2851-2852. ISSN 0021-9290, DOI https://doi.org/10.1016/j.jbiomech.2011.05.042.
Yusoff, N. and Abu Osman, Noor Azuan and Pingguan-Murphy, Belinda (2011) Design and validation of a bi-axial loading bioreactor for mechanical stimulation of engineered cartilage. Medical Engineering & Physics, 33 (6). pp. 782-788. ISSN 1350-4533 , DOI https://doi.org/10.1016/j.medengphy.2011.01.013.
Tham, Lai Kuan and Abu Osman, Noor Azuan and Lim, Kheng Seang and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar and Mohd Zain, Norita (2011) Investigation to predict patellar tendon reflex using motion analysis technique. Medical Engineering & Physics, 33 (4). pp. 407-410. ISSN 1350-4533, DOI https://doi.org/10.1016/j.medengphy.2010.11.002.
Dhakshyani, R. and Nukman, Y. and Abu Osman, Noor Azuan and Vijay, C. (2011) Preliminary report: rapid prototyping models for Dysplastic hip surgery. Central European Journal of Medicine, 6 (3). pp. 266-270. ISSN 1895-1058, DOI https://doi.org/10.2478/s11536-011-0012-6.
Moo, E.K. and Abu Osman, Noor Azuan and Pingguan-Murphy, Belinda (2011) The metabolic dynamics of cartilage explants over a long-term culture period. Clinics, 66 (8). pp. 1431-1436. ISSN 1807-5932, DOI https://doi.org/10.1590/s1807-59322011000800021.
Gholizadeh, Hossein and Abu Osman, Noor Azuan and Luviksdottir, Asa Gulaug and Eshraghi, Arezoo and Kamyab, Mojtaba and Wan Abas, Wan Abu Bakar (2011) A new approach for the pistoning measurement in transtibial prosthesis. Prosthetics and Orthotics International, 35 (4). pp. 360-364. ISSN 0309-3646, DOI https://doi.org/10.1177/0309364611423130.
Nukman, Y. and Abu Osman, Noor Azuan and Khairi, S.O. and Harizam, M.Z. (2010) A study on laser cutting of textiles. International Congress on Applications of Lasers & Electro Optics.
Amiri-Khorasani, M. and Abu Osman, Noor Azuan and Yusof, A. (2010) Electromyography assessments of the vastus medialis muscle during soccer instep kicking between dynamic and static stretching. Journal of Human Kinetics, 24. pp. 35-41. ISSN 1640-5544,
Amiri-Khorasani, M. and Abu Osman, Noor Azuan and Yusof, A. (2010) Kinematics analysis: Number of trials necessary to achieve performance stability during soccer instep kicking. Journal of Human Kinetics, 23. pp. 15-19. ISSN 1640-5544,
Dhakshyani, R. and Nukman, Y. and Abu Osman, Noor Azuan and Merican, A.M. and George, J. (2010) Rapid prototyping medical models for dysplastic hip orthopaedic surgery. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 224 (B5). pp. 769-776. ISSN 0954-4054, DOI https://doi.org/10.1243/09544054jem1785.
Abu Osman, Noor Azuan and Spence, W.D. and Solomonidis, S.E. and Paul, J.P. and Weir, A.M. (2010) Transducers for the determination of the pressure and shear stress distribution at the stump-socket interface of trans-tibial amputees. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 224 (8). pp. 1239-1250. ISSN 2041-2975, DOI https://doi.org/10.1243/09544054jem1820.
Abu Osman, Noor Azuan and Spence, W.D. and Solomonidis, S.E. and Paul, J.P. and Weir, A.M. (2010) The patellar tendon bar! Is it a necessary feature? Medical Engineering & Physics, 32 (7). pp. 760-765. ISSN 1350-4533, DOI https://doi.org/10.1016/j.medengphy.2010.04.020.
Khorasani, M.A. and Abu Osman, Noor Azuan and Yusof, A. (2009) Biomechanical responds of instep kick between different positions in professional soccer players. Journal of Human Kinetics, 22. pp. 21-27. ISSN 1640-5544,
Bani Hashim, A.Y. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Abdul Latif, L. (2009) Evaluation of a bio-mechanism by graphed static equilibrium forces. World Academy of Science, Engineering and Technology, 36. pp. 807-810. ISSN 2010376X,
Moo, E.K. and Abu Osman, Noor Azuan and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar and Spence, W.D. and Solomonidis, S.E. (2009) Interface pressure profile analysis for patellar tendon-bearing socket and hydrostatic socket. Acta of Bioengineering and Biomechanics, 11 (4). pp. 37-43. ISSN 1509-409X, DOI 20405814.
Abu Osman, Noor Azuan and Abu Yahud, S. and Goh, S.Y. (2008) Development of mechanical prosthetic hand system for BCI application. European Journal of Scientific Research, 20 (4). p863.
Zabir, F.A. and Abdullah, A.S. and Abu Osman, Noor Azuan and Radzi, Z. and Yahya, N.A. and Abu Kasim, Noor Hayaty (2008) Finite element analysis of an automated rapid maxillary expander (ARME). 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Vols 1 and 2, 21 (21). pp. 417-419. ISSN 1680-0737, DOI 978-3-540-69138-9.
Radzi, Zamri and Abu Kasim, Noor Hayaty and Yahya, Noor Azlin and Abu Osman, Noor Azuan and Abu Kassim, Noor Lide (2008) Relationship of the light intensity of selected light curing units with varying distance and angulation of the light curing tip and lightmeter. Annals of Dentistry University of Malaya, 15 (1). pp. 33-39. ISSN 0128-7532,
Radzi, Z. and Yahya, N.A. and Abu Kasim, Noor Hayaty and Abu Osman, Noor Azuan and Yusof, Z.Y.M. and Mohd, F.N. and Noor, N.H.M. and Jamaludin, M. and Othman, S.A. and Obaidellah, U.H. and Mohamed, N.H. and Kadir, R. and Nambiar, P. (2008) Validation of cone beam CT scan for measurement of palatal depth in study casts. 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Vols 1 and 2, 21 (1-2). pp. 758-761. ISSN 1680-0737 978-3-540-69138-9,
Obaidellah, U.H. and Merican, Amir Feisal and Abu Osman, Noor Azuan and Yahya, N.A. and Radzi, Z. (2008) The facial soft tissue simulation of orthognathic surgery using biomechanical model. 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Vols 1 and 2, 21 (1-2). pp. 751-757. ISSN 1680-0737,
Hussin, I.H. and Usman, Juliana and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan (2007) Body performance standards of healthy Malaysians: adult range of fitness level. Journal of Biomechanics, 40 (2). p. 767. ISSN 0021-9290,
Uning, R. and Abu Osman, Noor Azuan and Usman, J. and Wan Abas, Wan Abu Bakar (2007) Fractal characterization of gait in parkinson's disease using detrended fluctuation analysis. Journal of Biomechanics, 40 (2). p. 82. ISSN 0021-9290,
Sharizli, A.A. and Zabir, F.A. and Abu Osman, Noor Azuan and Radzi, Z. and Shaifizul, A.A. (2007) Preliminary design of an automated rapid maxillary expander for dento-facial application. Journal of Biomechanics, 40 (2). p. 459. ISSN 0021-9290,
Shasmin, Hanie Nadia and Abu Osman, Noor Azuan and Razali, R. and Usman, Juliana and Wan Abas, Wan Abu Bakar (2007) The effect of load carriage among primary school boys: a preliminary study. Journal of Mechanics in Medicine and Biology, 7 (3). pp. 265-274. ISSN 0219-5194, DOI https://doi.org/10.1142/S0219519407002285.
Shasmin, H.N. and Abu Osman, Noor Azuan and Latif, L.A. and Usman, J. and Wan Abas, Wan Abu Bakar (2007) A new pylon materials in transtibial prosthesis: a preliminary study. Journal of Biomechanics, 40 (2). p. 297. ISSN 0021-9290,
Shasmin, H.N. and Abu Osman, Noor Azuan and Razali, R. and Usman, J. and Wan Abas, Wan Abu Bakar (2007) A preliminary study of acceptable load carriage for primary school children. 3rd Kuala Lumpur International Conference on Biomedical Engineering 2006. pp. 171-174.
Rahman, Herman Shah and Abu Osman, Noor Azuan and Yahud, S. and Tunku Yahya, T.S. and Ng, Eng Seng (2007) A study of the external finger fixator to correct flexion deformity. Journal of Biomechanics, 40 (Spp.2). S183. ISSN 0021-9290, DOI https://doi.org/10.1016/S0021-9290(07)70179-3.
Razali, R. and Abu Osman, Noor Azuan and Shasmin, H.N. and Usman, J. and Wan Abas, Wan Abu Bakar (2006) Acceptable load carriage for primary school girls. European Journal of Scientific Research, 15 (3). pp. 396-403. ISSN 1450216X,
Saifizul, A.A. and Zainon, Z. and Abu Osman, Noor Azuan and Azlan, C.A. and Ibrahim, U.F.S.U. (2006) Intelligent control for self-erecting inverted pendulum via adaptive neuro-fuzzy inference system. American Journal of Applied Sciences, 3 (4). pp. 1795-1802. ISSN 1546-9239,
Razali, R. and Abu Osman, Noor Azuan and Shasmin, H.N. and Usman, J. and Wan Abas, Wan Abu Bakar (2005) Acceptable load carriage for primary school girls. European Journal of Scientific Research, 15 (3). pp. 396-403. ISSN 1450-216X,
Rambely, A.S. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Usman, J. and Yusof, M.S. (2003) An innovative survey poles configuration: an alternative 3-D volume calibrating system. Jurnal Teknologi.
Abu Osman, Noor Azuan and Wong, S.S. and Omar, Z. (2002) An approach for the correlation of EMG signals and the rectification of PTB sockets. Journal of Mechanics in Medicine and Biology, 2 (01). pp. 9-17. ISSN 0219-5194,
Zabir, F.A. and Abdullah, A.S. and Abu Osman, Noor Azuan and Radzi, Z. and Yahya, N.A. and Abu Kasim, Noor Hayaty (2008) Acquiring anatomical representation of human maxilla for rapid maxillary expansion. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008. Springer Berlin Heidelberg, pp. 387-389.
Rahman, H.S.A. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Ahmad, T.S. and Ng, E.S. (2008) Validation of finite element analysis for a new external finger fixator to Correct flexion deformity – a preliminary result. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Vols 1 and 2. IFMBE Proceedings, 1-2 (21). Springer-Verlag Berlin Heidelberg 2008, Kuala Lumpur, pp. 465-468. ISBN 1680-0737
Nizam, M. A. Mohamed and Abd Razak, Nasrul Anuar and Abu Osman, Noor Azuan and Jaladin, R. A. Mohd (2022) Qualitative study of prosthetic liner materials on transtibial amputees’ satisfaction in term of positional pain and discomfort. In: 6th Kuala Lumpur International Conference on Biomedical Engineering, BioMed 2021.
Ong, C.W. and Chan, B.T. and Lim, E. and Abu Osman, Noor Azuan and Abed, A.A. and Dokos, S. and Lovell, N.H. (2012) Fluid structure interaction simulation of left ventricular flow dynamics under left ventricular assist device support. In: International Conference of the IEEE Engineering in Medicine and Biology Society, 28 Aug - 1 Sep 2012, San Diego, California.
Chan, B.T. and Ong, C.W. and Lim, N. and Abu Osman, Noor Azuan and Al Abed, A. and Lovell, N.H. and Dokos, S. (2012) Simulation of left ventricle flow dynamics with dilated cardiomyopathy during the filling phase. In: International Conference of the IEEE Engineering in Medicine and Biology Society, 28 Aug - 1 Sep 2012, San Diego, California.
Azaman, A. and Kadri, Nahrizul Adib and Abu Osman, Noor Azuan (2012) Electromagnetic flux modeling of ac field over planar microarray dot electrodes used in dielectrophoretic lab-on-chip device. In: World Congress on Medical Physics and Biomedical Engineering, 26-31 May 2012, Beijing, China.
Safee, M.K.M. and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan and Ibrahim, Fatimah (2011) Activity of upper body muscles during bowing and prostration tasks in healthy subjects. In: 5th Kuala Lumpur International Conference on Biomedical Engineering (BioMed2011), 20-23 June 2011, Kuala Lumpur, Malaysia.
Bani Hashim, A.Y. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Abdul Latif, L. (2011) Approximation technique for prosthetic design using numerical foot profiling. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.
Abd Razak, N.A. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Ahmad Fu'ad, A.N. (2011) Comparison study of the transradial prosthetics and biological hand using motion analysis approach. In: International MultiConference of Engineers and Computer Scientists 2011, IMECS 2011, 2011, Kowloon.
Mazlan, M.H. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar (2011) Hip 3D joint mechanics analysis of normal and obese individuals' gait. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.
Oshkour, A.A. and Abu Osman, Noor Azuan and Davoodi, M.M. and Bayat, M. and Yau, Y.H. and Wan Abas, Wan Abu Bakar (2011) Impact load and mechanical respond of tibiofemoral joint. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.
Oshkour, A.A. and Abu Osman, Noor Azuan and Davoodi, M.M. and Bayat, M. and Yau, Y.H. and Wan Abas, Wan Abu Bakar (2011) Knee joint stress analysis in standing. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.
Bani Hashim, A.Y. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Abdul Latif, L. (2011) Prosthetic foot design: the significance of the normalized ground reaction force. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.
Tham, L.K. and Abu Osman, Noor Azuan and Lim, K.S. and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar (2011) Quantification of patellar tendon reflex by motion analysis. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.
Razman, R. and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan and Cheong, J.P.G. (2011) Temporal characteristics of the final delivery phase and its relation to tenpin bowling performance. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.
Aboodarda, S.J. and Yusof, A. and Abu Osman, Noor Azuan and Ibrahim, Fatimah (2011) Two practical strategies for developing resultant muscle torque production using elastic resistance device. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.
Gholizadeh, H. and Abu Osman, Noor Azuan and Luviksdottir, A.G. and Kamyab, M. and Eshraghi, A. and Ali, S. and Wan Abas, Wan Abu Bakar (2011) A new method for measuring pistoning in lower limb prosthetic. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.
Salahuddin, Mohd Helmi Rizal and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan and Ibrahim, Fatimah and Rahim, R.B.A. (2008) Preliminary study: The impact of moderate exercises on biomechanical response of the humans muscles. In: 4th Kuala Lumpur International Conference on Biomedical Engineering (BioMed 2008), 25-28 June 2008, Kuala Lumpur, Malaysia.
Abd Rahman, H.S. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Tunku Ahmad, T.S. and Ng, E.S. (2008) Validation of finite element analysis for a new external finger fixator to correct flexion deformity - a preliminary result. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.
Yusoff, U.A. and Abu Kasim, Noor Hayaty and Yahya, N.A. and Abu Osman, Noor Azuan and Radzi, Z. (2008) The effect of light curing tip angulations on the shear bond strength of an orthodontic adhesive. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Vols 1 and 2, 2008, Kuala Lumpur.
Kadri, Nahrizul Adib and Raha, M.G. and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar (2008) The first decade of biomedical engineering degree program at the University of Malaya: experiences and achievements. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.
Radzi, Z. and Abu Kasim, Noor Hayaty and Yahya, N.A. and Abu Osman, Noor Azuan and Kassim, N.L. (2007) Standardization of distance and angulation of light curing unit tip using distometer. In: 3rd Kuala Lumpur International Conference on Biomedical Engineering 2006, 2006, Kuala Lumpur.
