 | Up a level |
Abdul Rashid, Erfan Suryani and Julkapli, Nurhidayatullaili Muhd and Yehya, Wageeh Abdulhadi (2018) Reinforcement effect of nanocellulose on thermal stability of nitrile butadiene rubber (NBR) composites. Journal of Applied Polymer Science, 135 (32). p. 46594. ISSN 0021-8995, DOI https://doi.org/10.1002/app.46594.
Abdulwahid, Rebar T. and Aziz, Shujahadeen Bakr and Abdul Kadir, Mohd Fakhrul Zamani (2022) Design of proton conducting solid biopolymer blend electrolytes based on chitosan-potato starch biopolymers: Deep approaches to structural and ion relaxation dynamics of H+ ion. Journal of Applied Polymer Science, 139 (37). ISSN 0021-8995, DOI https://doi.org/10.1002/app.52892.
Al-Namnam, N.M.N. and Kim, K.H. and Chai, W.L. and Ha, K.O. and Siar, Chong Huat and Ngeow, Wei Cheong (2016) Modified poly(caprolactone trifumarate) with embedded gelatin microparticles as a functional scaffold for bone tissue engineering. Journal of Applied Polymer Science, 133 (30). p. 43711. ISSN 0021-8995, DOI https://doi.org/10.1002/app.43711.
Aziz, Shujahadeen B. and Abidin, Zul Hazrin Zainal (2015) Ion-transport study in nanocomposite solid polymer electrolytes based on chitosan: electrical and dielectric analysis. Journal of Applied Polymer Science, 132 (15). p. 41774. ISSN 0021-8995, DOI https://doi.org/10.1002/app.41774.
Bidin, Mohd Zikrilhakim and Ng, Hon Ming and Omar, Fatin Saiha and Ramesh, Kasi and Ramesh, Subramaniam (2017) Solid terpolymer electrolyte based on poly(vinyl butyral-co -vinyl alcohol-co -vinyl acetate) incorporated with lithium salt and tetraglyme for EDLCs. Journal of Applied Polymer Science, 135 (8). p. 45902. ISSN 0021-8995, DOI https://doi.org/10.1002/app.45902.
Chan, Jia Xin and Wong, Joon Fatt and Hassan, Azman and Othman, Norhayani and Abd Razak, Jeefferie and Nirmal, Umar and Hashim, Shahrir and Ching, Yern Chee and Yunos, Muhamad Zaini and Yahaya, Ridwan and Gunathilake, T. M. Sampath U. (2023) Mechanical, thermal, tribological, and flammability properties of polybutylene terephthalate composites: Comparing the effects of synthetic wollastonite nanofibers, natural wollastonite, and graphene oxide. Journal of Applied Polymer Science, 140 (6). ISSN 0021-8995, DOI https://doi.org/10.1002/app.53463.
Fakir, M.S. and Supangat, Azzuliani and Sulaiman, Khaulah (2016) Fabrication of PFO-DBT:OXCBA nanostructured composite via hard template. Journal of Applied Polymer Science, 133 (47). ISSN 0021-8995, DOI https://doi.org/10.1002/app.44228.
Gumel, A.M. and Annuar, M.S.M. (2014) Poly-3-hydroxyalkanoates-co-polyethylene Glycol Methacrylate Copolymers for pH Responsive and Shape Memory Hydrogel. Journal of Applied Polymer Science, 131 (23). ISSN 0021-8995,
Gumel, Ahmad Mohammed and Annuar, Mohamad Suffian Mohamad and Heidelberg, T. (2013) Current application of controlled degradation processes in polymer modification and functionalization. Journal of Applied Polymer Science. pp. 3079-3088. ISSN 0021-8995, DOI https://doi.org/10.1002/APP.39006.
Lee, S.Y. and Hassan, A. and Tan, I.K.P. and Terakawa, K. and Ichikawa, N. and Gan, S.N. (2010) Reactions of Palm Oil-Based mcl-PHAs with Epoxidized Natural Rubber. Journal of Applied Polymer Science, 115 (4). pp. 2039-2043. ISSN 0021-8995, DOI https://doi.org/10.1002/app.31236.
Lim, Boon-Leong and Ang, Desmond Teck-Chye (2022) Development of poly(butyl acrylate-co-oleic acid) as biobased polymeric dispersant and its application in preparation of pigment concentrate. Journal of Applied Polymer Science, 139 (42). ISSN 0021-8995, DOI https://doi.org/10.1002/app.53022.
Ng, P.L. and Mohamad, A.A. and Ahmad, Z.A. and Basirun, Wan Jefrey and Alias, Y. and Jamaludin, A. (2012) Effect of KOH concentration in the gel polymer electrolyte for direct borohydride fuel cell. Journal of Applied Polymer Science, 123 (5). pp. 2662-2666. ISSN 0021-8995, DOI https://doi.org/10.1002/app.34666.
Nguyen-Huu, Anh-Minh and Le, Ngoc Thuy Trang and Yen, Pham Nguyen Dong and Ching, Yern Chee and Nguyen, Dai Hai (2022) Self-assembly of methoxy poly(ethylene glycol)-cholesterol micelles for controlled quercetin delivery with toxicity test in Danio rerio model. Journal of Applied Polymer Science, 139 (37). ISSN 0021-8995, DOI https://doi.org/10.1002/app.52855.
Rizwan, Muhammad and Yahya, Rosiyah and Hassan, Aziz and Yar, Muhammad and Omar, Ros Anita and Azari, Pedram and Azzahari, Ahmad Danial and Selvanathan, Vidhya and Al-Maleki, Anis Rageh and Venkatraman, Gopinath (2017) Synthesis of a novel organosoluble, biocompatible, and antibacterial chitosan derivative for biomedical applications. Journal of Applied Polymer Science, 135 (9). p. 45905. ISSN 0021-8995, DOI https://doi.org/10.1002/app.45905.
Saidi, Norshahirah Mohamad and Ng, Hong Ming and Omar, Fatin Saiha and Bashir, Shahid and Ramesh, Kasi and Ramesh, Subramaniam (2019) Polyacrylonitrile–poly(1‐vinyl pyrrolidone‐co‐vinyl acetate) blend based gel polymer electrolytes incorporated with sodium iodide salt for dye‐sensitized solar cell applications. Journal of Applied Polymer Science, 136 (32). p. 47810. ISSN 0021-8995, DOI https://doi.org/10.1002/app.47810.
Saleem, Mehvish and Zahid, Saba and Ghafoor, Sarah and Khalid, Hina and Iqbal, Haffsah and Zeeshan, Rabia and Ahmad, Sarfraz and Asif, Anila and Khan, Abdul Samad (2021) Physical, mechanical, and in vitro biological analysis of bioactive fibers-based dental composite. Journal of Applied Polymer Science, 138 (18). ISSN 0021-8995, DOI https://doi.org/10.1002/app.50336.
Sambasevam, K.P. and Mohamad, S. and Phang, Sook Wai (2015) Enhancement of polyaniline properties by different polymerization temperatures in hydrazine detection. Journal of Applied Polymer Science, 132 (13). ISSN 0021-8995,
Shahapurkar, Kiran and Soudagar, Manzoore Elahi M. and Shahapurkar, Pavan and Mathapathi, Mahantayya and Khan, T. M. Yunus and Mujtaba, M. A. and Ali, M. D. Irfan and Thanaiah, Kumara and Siddiqui, Md Irfanul Haque and Ali, Masood Ashraf (2022) Effect of crump rubber on the solid particle erosion response of epoxy composites. Journal of Applied Polymer Science, 139 (2). ISSN 0021-8995, DOI https://doi.org/10.1002/app.51470.
Shamsuddin, Muhamad Syukri Mohamed and Othman, Ainur Hanim and Nasir, Ramdziah Md and Hassan, Aziz and Senawi, Rozaimi and Thirmizir, Mohd Zharif Ahmad and Ishak, Zainal Arifin Mohd (2021) Influence of PTFE as a solid lubricant on the mechanical, electrical, and tribological properties of CF-reinforced PC composites. Journal of Applied Polymer Science, 138 (18). ISSN 0021-8995, DOI https://doi.org/10.1002/app.50346.
Shariful, Md Islam and Sepehr, T. and Mehrali, Mohammad and Ang, Bee Chin and Amalina, Muhammad Afifi (2017) Adsorption capability of heavy metals by chitosan/poly(ethylene oxide)/activated carbon electrospun nanofibrous membrane. Journal of Applied Polymer Science, 135 (7). p. 45851. ISSN 0021-8995, DOI https://doi.org/10.1002/app.45851.
Sin, M.C. and Tan, I.K.P. and Annuar, M.S.M. and Gan, S.N. (2012) Kinetics of Thermodegradation of Palm Kernel Oil Derived Medium-Chain-Length Polyhydroxyalkanoates. Journal of Applied Polymer Science. ISSN 0021-8995, DOI https://doi.org/10.1002/app.38033.
Syawal, Hilmi and Farhana, Nur Khuzaimah and Goh, Zhi Ling and Bashir, Shahid and Saidi, Norshahirah Mohamad and Rachagan, Elizer and Ramesh, T. Subramaniam and Kasi, Ramesh (2021) Highly efficient dye-sensitized solar cells: A comparative study with two different system of solvent-free binary room-temperature ionic liquid-based electrolytes. Journal of Applied Polymer Science, 138 (44). ISSN 0021-8995, DOI https://doi.org/10.1002/app.51312.
Tan, Chin Joo and Lee, Jacky Jia Li and Ang, Bee Chin and Andriyana, Andri and Chagnon, Grégory and Sukiman, Muhamad Shafiq (2019) Design of polyurethane fibers: Relation between the spinning technique and the resulting fiber topology. Journal of Applied Polymer Science, 136 (26). p. 47706. ISSN 0021-8995, DOI https://doi.org/10.1002/app.47706.
Theerthagiri, J. and Senthil, R.A. and Buraidah, Mohd Hamdi and Madhavan, J. and Arof, Abdul Kariem (2015) Studies of solvent effect on the conductivity of 2-mercaptopyridine-doped solid polymer blend electrolytes and its application in dye-sensitized solar cells. Journal of Applied Polymer Science, 132 (35). p. 42489. ISSN 0021-8995, DOI https://doi.org/10.1002/app.42489.
Then, S. and Neon, G.S. and Abu Kasim, Noor Hayaty (2011) Performance of melamine modified urea-formaldehyde microcapsules in a dental host material. Journal of Applied Polymer Science, 122 (4). pp. 2557-2562. ISSN 0021-8995, DOI https://doi.org/10.1002/app.34361.
Tiew, S.X. and Misran, M. (2017) Encapsulation of salicylic acid in acylated low molecular weight chitosan for sustained release topical application. Journal of Applied Polymer Science, 134 (36). p. 44849. ISSN 0021-8995, DOI https://doi.org/10.1002/app.45273.
Velayutham, T.S. and Abd Majid, Wan Haliza and Ahmad, A.B. and Gam, Y.K. and Gan, S.N. (2009) The physical and mechanical properties of polyurethanes from oleic acid polyols. Journal of Applied Polymer Science, 112 (6). pp. 3554-3559. ISSN 0021-8995, DOI https://doi.org/10.1002/app.29758.
Velayutham, T.S. and Abd Majid, Wan Haliza and Gan, S.N. (2011) Electrical Behavior of Polyurethane Derived from Polyols Synthesized with Glycerol, Phthalic Anhydride, and Oleic Acid. Journal of Applied Polymer Science, 121 (3). pp. 1796-1803. ISSN 0021-8995, DOI https://doi.org/10.1002/app.33468.
Yeoh, F.H. and Lee, Choy Sin and Kang, Yew Beng and Wong, S.F. and Cheng, Sit Foon (2018) One-pot synthesis of palm oil-based polyester polyol for production of biodegradable and biocompatible polyurethane. Journal of Applied Polymer Science, 135 (44). p. 46861. ISSN 0021-8995, DOI https://doi.org/10.1002/app.46861.
