Browse by Journal

A

Abdulkareem-Alsultan, G. and Asikin-Mijan, N. and Lee, H.V. and Taufiq-Yap, Y.H. (2016) A new route for the synthesis of La-Ca oxide supported on nano activated carbon via vacuum impregnation method for one pot esterification-transesterification reaction. Chemical Engineering Journal, 304. pp. 61-71. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2016.05.116.

Abo-Hamad, A. and Hayyan, M. and AlSaadi, M.A. and Hashim, M.A. (2015) Potential applications of deep eutectic solvents in nanotechnology. Chemical Engineering Journal, 273. pp. 551-567. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2015.03.091.

Ahmad, Fisal and Daud, Wan Mohd Ashri Wan and Ahmad, Mohd Azmier and Radzi, Rosinah (2011) Using cocoa (Theobroma cacao) shell-based activated carbon to remove 4-nitrophenol from aqueous solution: Kinetics and equilibrium studies. Chemical Engineering Journal, 178. pp. 461-467. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2011.10.044.

Ahmady, A. and Hashim, M.A. and Aroua, M.K. (2011) Density, viscosity, physical solubility and diffusivity of CO 2 in aqueous MDEA+bmimBF 4 solutions from 303 to 333K. Chemical Engineering Journal, 172 (2-3). pp. 763-770. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2011.06.059.

Ahmady, A. and Hashim, M.A. and Aroua, M.K. (2012) Kinetics of carbon dioxide absorption into aqueous MDEA+bmimBF 4 solutions from 303 to 333K. Chemical Engineering Journal, 200-20. pp. 317-328. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2012.06.037.

Amiri, A. and Shanbedi, M. and Chew, B.T. and Kazi, S.N. and Solangi, K.H. (2016) Toward improved engine performance with crumpled nitrogen-doped graphene based water-ethylene glycol coolant. Chemical Engineering Journal, 289. pp. 583-595. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2015.12.083.

Amiri, A. and Zubir, M.N.M. and Dimiev, A.M. and Teng, K.H. and Shanbedi, M. and Kazi, S.N. and Rozali, S. (2017) Facile, environmentally friendly, cost effective and scalable production of few-layered graphene. Chemical Engineering Journal, 326. pp. 1105-1115. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2017.06.046.

Aziz, A. and Yau, Y.H. and Puma, G.L. and Fischer, C. and Ibrahim, S. and Pichiah, S. (2014) Highly efficient magnetically separable TiO2-graphene oxide supported SrFe12O19 for direct sunlight-driven photoactivity. Chemical Engineering Journal, 235. pp. 264-274. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2013.09.043.

Aziz, A.A. and Cheng, C.K. and Ibrahim, S. and Matheswaran, M. and Saravanan, P. (2012) Visible light improved, photocatalytic activity of magnetically separable titania nanocomposite. Chemical Engineering Journal, 183. pp. 349-356. ISSN 13858947, DOI https://doi.org/10.1016/j.cej.2012.01.006.

C

Chiu, W.S. and Khiew, P.S. and Isa, D. and Cloke, M. and Radiman, S. and Abd-Shukor, R. and Abdullah, M.H. and Huang, N.M. (2008) Synthesis of two-dimensional ZnO nanopellets by pyrolysis of zinc oleate. Chemical Engineering Journal, 142 (3). pp. 337-343. ISSN 13858947 , DOI https://doi.org/10.1016/j.cej.2008.04.034.

D

Din, Israf Ud and Shaharun, Maizatul Shima and Naeem, A. and Tasleem, S. and Johan, Mohd Rafie (2018) Carbon nanofibers based copper/zirconia catalysts for carbon dioxide hydrogenation to methanol: Effect of copper concentration. Chemical Engineering Journal, 334. pp. 619-629. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2017.10.087.

G

Golsheikh, A.M. and Huang, N.M. and Lim, H.N. and Chia, C.H. and Harrison, I. and Muhamad, M.R. (2012) One-Pot hydrothermal synthesis and characterization of FeS2(Pyrite)/graphene nanocomposite. Chemical Engineering Journal, 218. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2012.09.082.

H

Huang, N.M. and Chiu, W.S. and Khiew, P.S. and Cloke, M. and Isa, D. and Tan, T.K. and Radiman, S. and Abd-Shukor, R. and Hamid, M.A. Abd and Lim, H.N. and Chia, C.H. (2010) Photocatalytic study of two-dimensional ZnO nanopellets in the decomposition of methylene blue. Chemical Engineering Journal, 158 (2). pp. 345-352. ISSN 13858947, DOI https://doi.org/10.1016/j.cej.2010.01.052.

Huang, N.M. and Radiman, S. and Lim, H.N. and Khiew, P.S. and Chiu, W.S. and Lee, K.H. and Syahida, A. and Hashim, R. and Chia, C.H. (2009) Gamma-Ray assisted synthesis of silver nanoparticles in chitosan solution and the antibacterial properties. Chemical Engineering Journal, 155 (1-2). pp. 499-507. ISSN 1385-8947,

Huang, N.M. and Radiman, S. and Lim, H.N. and Yeong, S.K. and Khiew, P.S. and Chiu, W.S. and Saeed, G.H.M. and Nadarajah, K. (2009) Gamma-Ray assisted synthesis of Ni3Se2 nanoparticles stabilized by natural polymer. Chemical Engineering Journal, 147 (2-3). pp. 399-404. ISSN 1385-8947,

Hussin, F. and Aroua, M.K. and Daud, W.M.A.W. (2011) Textural characteristics, surface chemistry and activation of bleaching earth: A review. Chemical Engineering Journal, 170 (1). pp. 90-106. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2011.03.065.

I

Ibrehem, A.S. and Hussain, Mohd Azlan and Ghasem, N.M. (2009) Modified mathematical model for gas phase olefin polymerization in fluidized-bed catalytic reactor. Chemical Engineering Journal, 149 (1-3). pp. 353-362. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2008.05.014.

K

Kang, K. and Jang, M. and Cui, M. and Qiu, P. and Na, S. and Son, Y. and Khim, J. (2015) Enhanced sonocatalytic treatment of ibuprofen by mechanical mixing and reusable magnetic core titanium dioxide. Chemical Engineering Journal, 264. pp. 522-530. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2014.10.106.

Khalil, S.H. and Aroua, M.K. and Daud, W.M.A.W. (2012) Study on the improvement of the capacity of amine-impregnated commercial activated carbon beds for Co-2 adsorbing. Chemical Engineering Journal, 183. pp. 15-20. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2011.12.011.

Kumar, L. Harish and Kazi, S. N. and Masjuki, H. H. and Mohd Zubir, Mohd Nashrul (2022) A review of recent advances in green nanofluids and their application in thermal systems. Chemical Engineering Journal, 429. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2021.132321.

L

Lee, C.S. and Ong, Y.L. and Aroua, M.K. and Daud, W.M.A.W. (2013) Impregnation of palm shell-based activated carbon with sterically hindered amines for CO2 adsorption. Chemical Engineering Journal, 219. pp. 558-564. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2012.10.064.

Lee, W.S. and Chua, A.S.M. and Yeoh, H.K. and Nittami, T. and Ngoh, G.C. (2015) Strategy for the biotransformation of fermented palm oil mill effluent into biodegradable polyhydroxyalkanoates by activated sludge. Chemical Engineering Journal, 269. pp. 288-297. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2015.01.103.

N

Ng, Wai Lun and Chua, Adeline Seak May and Low, Jiun Hor and Yoon, Li Wan (2024) Mixed culture resource recovery from industrial waste glycerin pitch: Microbial analysis and production of bio-flocculants extracellular polymeric substances. Chemical Engineering Journal, 482. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2024.149074.

Ng, Wai Lun and Chua, Adeline Seak May and Low, Jiun Hor and Yoon, Li Wan (2024) Mixed culture resource recovery from industrial waste glycerin pitch: Microbial analysis and production of bio-flocculants extracellular polymeric substances. Chemical Engineering Journal, 482. p. 149074. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2024.149074.

Nguyenhuynh, Thaothy and Yoon, Li Wan and Chow, Yin Hui and Chua, Adeline Seak May (2021) An insight into enrichment strategies for mixed culture in polyhydroxyalkanoate production: Feedstocks, operating conditions and inherent challenges. Chemical Engineering Journal, 420 (3). ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2021.130488.

P

Putra, Putri Humairah Monashofian and Rozali, Shaifulazuar and Patah, Muhamad Fazly Abdul and Ghazali, Nik Nazri Nik and Ahmad, Roslina and Idris, Aida (2024) Effect of metal powder and coil on microwave pyrolysis of mixed plastic. Chemical Engineering Journal, 487. p. 150530. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2024.150530.

S

Shamiri, A. and Hussain, Mohd Azlan and Mjalli, F.S. and Mostoufi, N. (2010) Kinetic modeling of propylene homopolymerization in a gas-phase fluidized-bed reactor. Chemical Engineering Journal, 161 (1-2). pp. 240-249. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2010.04.037.

Shamiri, Ahmad and Wong, S.W. and Zanil, M.F. and Hussain, Mohd Azlan and Mostoufi, N. (2015) Modified two-phase model with hybrid control for gas phase propylene copolymerization in fluidized bed reactors. Chemical Engineering Journal, 264. pp. 706-719. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2014.11.104.

Supramaniam, Janarthanan and Low, Darren Yi Sern and Wong, See Kiat and Leo, Bey Fen and Goh, Bey Hing and Tang, Siah Ying (2022) Nano-engineered ZnO/CNF-based epoxidized natural rubber with enhanced strength for novel self-healing glove fabrication. Chemical Engineering Journal, 437 (2). DOI https://doi.org/10.1016/j.cej.2022.135440.

V

Vijay Kumar, S. and Huang , N.M. and Lim, H.N. and Marlinda, A.R. and Harrison, I. and Chia, C.H. (2012) One-step size-controlled synthesis of functional graphene oxide/silver nanocomposites at room temperature. Chemical Engineering Journal, 219. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2012.09.063.

W

Wang, Jian and Cui, Jing and Li, Zhaojin and Zhang, Di and Sun, Huilan and Wang, Huan and Wang, Qiujun and Woo, Haw Jiunn and Wang, Bo (2023) Polysulfide-derived anion heterogeneous interfaces engineering to facilitate high-efficiency sodium ion storage. Chemical Engineering Journal, 464. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2023.142764.

Y

Yin, C.Y. and Aroua, M.K. and Daud, W.M.A.W. (2009) Fixed-bed adsorption of metal ions from aqueous solution on polyethyleneimine-impregnated palm shell activated carbon. Chemical Engineering Journal, 148 (1). pp. 8-14. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2008.07.032.

Z

Zabed, H. and Faruq, G. and Sahu, J.N. and Boyce, A.N. and Ganesan, P. (2016) A comparative study on normal and high sugary corn genotypes for evaluating enzyme consumption during dry-grind ethanol production. Chemical Engineering Journal, 287. pp. 691-703. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2015.11.082.