 | Up a level |
Abd Shukor, Mohd Hamdi and Ektessabi, Ari-Ide (2006) Calcium phosphate coatings: a comparative study between simultaneous vapor deposition and electron beam deposition techniques. Surface and Coatings Technology, 201 (6). pp. 3123-3128. ISSN 0257-8972,
Abdullah, A.S. and Hai, L.K. and Osman, N.A.A. and Zainon, M.Z. (2006) Vision based automatic steering control using a PID controller. Jurnal Teknologi (A), 44 (A). pp. 97-114. ISSN 0127-9696,
Adikan, Faisal Rafiq Mahamd and Gates, J.C. and Gawith, C.B.E. and Smith, P.G.R. (2006) Coupling ratio tuning of direct UV-written X-couplers for cascaded power splitters in WDM networks. Electronics Letters, 42 (24). pp. 1397-1398. ISSN 0013-5194,
Adikan, Faisal Rafiq Mahamd and Gawith, Corin B.E. and Smith, Peter G.R. and Sparrow, Ian J.G. and Emmerson, Gregory D. and Riziotis, Christos and Ahmad, Harith (2006) Design and demonstration of direct UV-written small angle X couplers in silica-on-silicon for broadband operation. Applied Optics, 45 (24). pp. 6113-6118. ISSN 0003-6935, DOI https://doi.org/10.1364/AO.45.006113.
Ahmad, Harith and Harun, Sulaiman Wadi (2006) Double pass S-band EDFA. Journal of Nonlinear Optical Physics & Materials, 15 (03). pp. 303-307. ISSN 0218-8635, DOI https://doi.org/10.1142/S0218863506003347.
Al-Mansoori, M.H. and Adikan, Faisal Rafiq Mahamd and Naji, A.W. and Abdullah, M.K. and Mahdi, M.A. (2006) Multi-wavelength fabry-perot brillouin-erbium fibre laser. Optik, 117 (3). pp. 128-130. ISSN 0030-4026,
Azwar, - and Hussain, Mohd Azlan and Ramachandran, K.B. (2006) The study of neural network-based controller for controlling dissolved oxygen concentration in a sequencing batch reactor. Bioprocess and Biosystems Engineering, 28 (4). pp. 251-265. ISSN 1615-7591, DOI https://doi.org/10.1007/s00449-005-0031-2.
Bakar, A.H.A. and Lim, C.H. and Mekhilef, Saad (2006) Investigation of transient performance of capacitor voltage transformer. In: 1st International Power and Energy Conference, PECon 2006, Putrajaya.
Bakar, A.H.A. and Yusof, S. and Satchiananda, M. and Mekhilef, Saad (2006) Load response towards voltage in TNB power system using the measurement approach. In: 1st International Power and Energy Conference, PECon 2006, Putrajaya.
Ghasem, N.M. and Hussain, Mohd Azlan and Sata, S.A. (2006) Application of model predictive control to batch polymerization reactor. Revista de la Facultad de Ciencias, 11 (1). pp. 49-58. ISSN 0122-7483,
Harun, Sulaiman Wadi and Abdul-Rashid, Hairul Azhar and Muhd-Yassin, S.Z. and Abd-Rahman, Mohd Kamil and Tamjis, Mohamad Rom and Ahmad, Harith (2006) Dual-stage Er/Yb doped fiber amplifier for gain and noise figure enhancements. IEICE Electronics Express, 3 (23). pp. 517-521. ISSN 1349-2543, DOI https://doi.org/10.1587/elex.3.517.
Harun, Sulaiman Wadi and Cheng, Xiau San and Ahmad, Harith (2006) S-band Brillouin/erbium fiber laser for DWDM application. Journal of Nonlinear Optical Physics & Materials, 15 (03). pp. 309-313. ISSN 0218-8635, DOI https://doi.org/10.1142/S0218863506003311.
Harun, Sulaiman Wadi and Chong, Wu Yi and Subramaniam, T. and Ahmad, Harith (2006) Effect of Output Coupling Reflectivity on Performance of L-band Erbium-doped Fiber Laser. Journal of Optical Communications, 27 (1). pp. 8-10. ISSN 0173-4911, DOI https://doi.org/10.1515/JOC.2006.27.1.8.
Harun, Sulaiman Wadi and Samsuri, Norhakimah Md and Ahmad, Harith (2006) Gain-clamping techniques in two-stage double-pass L-band EDFA. Pramana, 66 (3). pp. 539-545. ISSN 0304-4289, DOI https://doi.org/10.1007/BF02704497.
Harun, Sulaiman Wadi and Zulkifli, Mohd Zamani and Ahmad, Harith (2006) A linear cavity S-band Brillouin/Erbium fiber laser. Laser Physics Letters, 3 (7). pp. 369-371. ISSN 1612-2011, DOI https://doi.org/10.1002/lapl.200610017.
Haseeb, A.S. Md. Abdul (2006) Modeling of the effects of athermal flow strength and activation energy for dislocation glide an the nanoindentation creep of nickel thin film at room temperature. Computational Materials Science, 37 (3). pp. 278-283. ISSN 0927-0256, DOI https://doi.org/10.1016/j.commatsci.2005.07.006.
Hassan, M.A. and Kanno, I. and Kotera, H. (2006) Compound two-dimensional thermo-elastic and thermodynamic analysis for axis-oriented epitaxial lead titanate thin films. Vacuum, 81 (4). pp. 459-465. ISSN 0042-207X,
Ibrahim, S. and Vikineswary, S. and Al-Azad, S. and Chong, L.L. (2006) The effects of light intensity, inoculum size, and cell immobilisation on the treatment of sago effluent with Rhodopseudomonas palustris strain B1. Biotechnology and Bioprocess Engineering, 11 (5). pp. 377-381. ISSN 1226-8372, DOI https://doi.org/10.1007/Bf02932303.
Ichikawa, Y. and Matsunaga, T. and Hassan, M. and Kanno, I. and Suzuki, T. and Wasa, K. (2006) Growth and structure of heteroepitaxial lead titanate thin films constrained by miscut strontium titanate substrates. Journal of Materials Research, 21 (05). pp. 1261-1268. ISSN 0884-2914,
Ismail, Z. and Abdul Razak, H. and Abdul Rahman, A.G. (2006) Determination of damage location in RC beams using mode shape derivatives. Engineering Structures, 28 (11). pp. 1566-1573. ISSN 0141-0296, DOI https://doi.org/10.1016/j.engstruct.2006.02.010.
Ismail, Z. and Hashim, Roslan (2006) Seepage of contaminants from waste containment. Journal of Environmental Hydrology, 14. pp. 1-9. ISSN 10583912, DOI http://connection.ebscohost.com/c/articles/24653479/seepage-contaminants-from-waste-containment.
Issabayeva, G. and Aroua, M.K. and Sulaiman, N.M. (2006) Electrodeposition of copper and lead on palm shell activated carbon in a flow-through electrolytic cell. Desalination, 194 (1-3). pp. 192-201. ISSN 1476-914X, DOI https://doi.org/10.1016/j.desal.2005.09.029.
Issabayeva, G. and Aroua, M.K. and Sulaiman, N.M.N. (2006) Removal of lead from aqueous solutions on palm shell activated carbon. Bioresource Technology, 97 (18). pp. 2350-2355. ISSN 0960-8524, DOI https://doi.org/10.1016/j.biortech.2005.10.023.
Jang, M. and Min, S.H. and Kim, T.H. and Park, J.K. (2006) Removal of arsenite and arsenate using hydrous ferric oxide incorporated into naturally occurring porous diatomite. Environmental Science and Technology, 40 (5). pp. 1636-1643. ISSN 0013936X, DOI https://doi.org/10.1021/es051501t.
Jumaat, Mohd Zamin and Alam, M.A. (2006) Problems associated with plate bonding methods of strengthening reinforced concrete beams. Journal of Applied Sciences Research, 2 (10). pp. 703-708. DOI https://www.aensiweb.com/jasr/jasr/2006/703-708.pdf.
Jumaat, Mohd Zamin and Bakar, Aishah Abu and Razali, Fadini Mohamad and Rahim, Ahmad Hazim Abdul and Othman, Johari (2006) The determination of the embedment strength of Malaysian hardwood. In: 9th World Conference on Timber Engineering 2006, WCTE 2006, 2006, Portland, OR.
Jumaat, Mohd Zamin and Kabir, M.H. and Obaydullah, M. (2006) A review of the repair of reinforced concrete beams. Journal of Applied Science Research, 2 (6). pp. 317-326.
Jumaat, Mohd Zamin and Rahim, A.H.A. and Othman, J. and Midon, M.S. (2006) Strength evaluation of oil palm stem trussed rafters. Construction and Building Materials, 20 (9). pp. 812-818. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2005.01.049.
Jumaat, Mohd Zamin and Rahim, Ahmad Hazim Abdul and Othman, Johari and Razali, Fadini Mohamad (2006) Timber engineering research and education in Malaysia. In: 9th World Conference on Timber Engineering 2006, WCTE 2006, 2006, Portland, OR.
Kadri, Nahrizul Adib and Raha, M.G. (2006) Creating animated medical images (Part 1). Biomedical Imaging and Intervention Journal, 2 (2).
Kadri, Nahrizul Adib and Raha, M.G. (2006) Creating animated medical images (Part 2). Biomedical Imaging and Intervention Journal, 2 (3). ISSN 1823-5530,
Khalid, A.R. and Mokhlis, Hazlie and Li, H. (2006) Fault section detection and location on distribution network using analytical voltage sags database. In: 2006 China International Conference on Electricity Distribution (CICED 2006), 2006.
Mahdi, M.A. and Adikan, Faisal Rafiq Mahamd and Ahmad, Harith (2006) Single-mode pumping scheme for EDFA with high-power conversion efficiency using a 980-nm Ti : S laser. Microwave and Optical Technology Letters, 48 (1). pp. 71-74. ISSN 0895-2477,
Mahdiraji, G.A. and Mohamed, A. (2006) Classifying short duration voltage disturbances using fuzzy expert system. In: 4th Student Conference on Research and Development, 2006. SCOReD 2006. , 2006.
Mahdiraji, G.A. and Zahedi, E. (2006) Comparison of selected digital modulation schemes (OOK, PPM and DPIM) for wireless optical communications. In: Research and Development, 2006. SCOReD 2006. 4th Student Conference on, 2006.
Masjuki, Haji Hassan and Kalam, M.A. and Syazly, M. and Mahlia, T.M.I. and Rahman, A.H. and Redzuan, M. and Varman, M. and Saidur, Rahman and Yau, Y.H. (2006) Experimental evaluation of an unmodified diesel engine using biodiesel with fuel additive. In: 1st International Forum On Strategic Technology "e-Vehicle Technology", IFOST 2006, 2006, Ulsan.
Meau, Y.P. and Ibrahim, F. and Narainasamy, S.A.L. and Omar, R. (2006) Intelligent classification of electrocardiogram (ECG) signal using extended Kalman Filter (EKF) based neuro fuzzy system. Computer Methods and Programs in Biomedicine, 82 (2). pp. 157-168. ISSN 0169-2607, DOI https://doi.org/10.1016/j.cmpb.2006.03.003.
Mekhilef, Saad and Masaoud, A. (2006) Xilinx FPGA based multilevel PWM single phase inverter. In: 2006 IEEE International Conference on Industrial Technology, ICIT, Mumbai.
Mekhilef, Saad and Omar, A.M. and Muhammad, K.S. (2006) An improved topology of digitally-controlled single-phase single-stage high DC voltage converter. In: 37th IEEE Power Electronics Specialists Conference 2006, PESC'06, Jeju.
Mekhilef, Saad and Rahim, N.A. and Ping, H.W. (2006) Performance of maximum power point tracker in tropical climate. In: 37th IEEE Power Electronics Specialists Conference 2006, PESC'06, Jeju.
Mokhlis, Hazlie and Khalid, A.R. and Li, H.Y. (2006) Development of automated fault location software for distribution network. In: Power and Energy Conference, 2006. PECon'06. IEEE International, 2016, Putrajaya, Malaysia..
Mujtaba, I.M. and Aziz, N. and Hussain, Mohd Azlan (2006) Neural network based modelling and control in batch reactor. Chemical Engineering Research and Design, 84 (A8). pp. 635-644. ISSN 0263-8762, DOI https://doi.org/10.1205/Cherd.05096.
Naher, Sumsun and Haseeb, A.S. Md. Abdul (2006) A technical note on the production of zirconia and zircon brick from locally available zircon in Bangladesh. Journal of Materials Processing Technology, 172 (3). pp. 388-393. ISSN 0924-0136, DOI https://doi.org/10.1016/j.jmatprotec.2005.10.013.
Nasir, N.F.M. and Raha, M.G. and Kadri, K.N. and Rampado, M. and Azlan, C.A. (2006) The study of morphological structure, phase structure and molecular structure of collagen-PEO 600K blends for tissue engineering application. American Journal of Biochemistry and Biotechnology, 2 (4). pp. 175-179.
Ng, K.H. and Tan, L.K. and Kadri, Nahrizul Adib and Lee, S.E. and Siow, H.L. (2006) Web-based educational portal on EMF for children. Bioengine. pp. 377-380.
Rahim, N.A. and Mekhilef, Saad and Chan, E.L. and Ping, H.W. (2006) Fuzzy-controlled battery charger state-of-charge controller. International Journal of Modelling and Simulation, 26 (2). pp. 106-110. ISSN 02286203,
Rashid, M.M. and Hussain, Mohd Azlan and Rahim, N. Abd (2006) Application of magneto-rheological damper for car suspension control. Journal of Applied Sciences, 6 (4). pp. 933-938. ISSN 18125654, DOI https://doi.org/10.3923/jas.2006.933.938.
Razali, R. and Abu Osman, Noor Azuan and Shasmin, H.N. and Usman, J. and Wan Abas, Wan Abu Bakar (2006) Acceptable load carriage for primary school girls. European Journal of Scientific Research, 15 (3). pp. 396-403. ISSN 1450216X,
Saidur, Rahman and Khaliq, A.H.A. and Masjuki, Haji Hassan (2006) Analysis of energy and exergy use for process heating in the industrial sector of Malaysia. International Journal of Exergy, 3 (2). pp. 119-149. ISSN 1742-8297, DOI https://doi.org/10.1504/ijex.2006.009041.
Saidur, Rahman and Masjuki, Haji Hassan and Eow, K.F. and Jamaluddin, M.Y. (2006) Actual usage conditions and energy consumption of refrigerator-freezers. International Energy Journal, 7 (2). pp. 103-124. ISSN 1513-718X,
Saidur, Rahman and Masjuki, Haji Hassan and Jamaluddin, M.Y. (2006) A new approach to investigate the energy performance of a household refrigerator-freezer. International Energy Journal, 7 (1). pp. 13-23. ISSN 1513-718X,
Saidur, Rahman and Masjuki, Haji Hassan and Jamaluddin, M.Y. and Yap, F.C. (2006) Actual usage conditions, energy savings and associated emission reductions of washing machines. Transactions Hong Kong Institution of Engineers, 13 (2). pp. 16-23. ISSN 1023697X ,
Saidur, Rahman and Sattar, M.A. and Izudin, A. and Masjuki, Haji Hassan (2006) Developing a comprehensive energy guide label for household appliances through consumers research survey. Journal of Energy & Environment,, 5. pp. 77-93.
Saifizul, A.A. and Zainon, Z. and Abu Osman, Noor Azuan and Azlan, C.A. and Ibrahim, U.F.S.U. (2006) Intelligent control for self-erecting inverted pendulum via adaptive neuro-fuzzy inference system. American Journal of Applied Sciences, 3 (4). pp. 1795-1802. ISSN 1546-9239,
Sarhan, Ahmed Aly Diaa and Matsubara, Atsushi and Sugihara, Motoyuki and Saraie, Hidenori and Ibaraki, Soichi and Kakino, Yoshiaki (2006) Monitoring method of cutting force by using additional spindle sensors. JSME International Journal Series C, 49 (2). pp. 307-315. ISSN 1344-7653,
Shorowordi, Kazi Md and Haseeb, A.S. Md. Abdul and Celis, Jean Pierre (2006) Chemical and structural nature of tribo-surface of aluminium-SiC composites at nanometre and micrometre length scales. Materials Science and Engineering: A, 425 (1-2). pp. 213-218. ISSN 0921-5093, DOI https://doi.org/10.1016/j.msea.2006.03.058.
Shorowordi, Kazi Md and Haseeb, A.S. Md. Abdul and Celis, Jean Pierre (2006) Tribo-surface characteristics of Al-B4C and Al-SiC composites worn under different contact pressures. Wear, 261 (5-6). pp. 634-641. ISSN 0043-1648, DOI https://doi.org/10.1016/j.wear.2006.01.023.
Subramaniam, P. and Khan, N.A. and Ibrahim, S. (2006) The Effects of Various Parameters on Cr (VI) Adsorption by Raw Rice Husk. Malaysian Journal of Science, 25 (1). pp. 23-29. ISSN 1394-3065,
Yaacob, H. and Wahab, N.A. and Abdullah, Ramli and Ibrahim, Shaliza (2006) Internationalisation of postgraduate education: University of Malaya's experience. In: Postgraduate education : trends and future directions. Institute of Postgraduate Studies, University of Malaya, Kuala Lumpur, pp. 47-57. ISBN 9789839576344
Younis, M.A.A. and Rahim, N.A. and Mekhilef, Saad (2006) Fuel cell model for three-phase inverter. In: 1st International Power and Energy Conference, PECon 2006, Putrajaya.
