 | Up a level |
AbdRabbuh, O. Almatar and Kazi, S.N. and Zubir, Mohd Nashrul Mohd and Chowdhury, Zaira Zaman and Abdelrazek, Ali H. (2024) Heat transfer inside annular passages: A comparison of noncircular and fully circular passages using eco-friendly graphene nanofluid. Case Studies in Thermal Engineering, 60. p. 104659. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2024.104659.
Ahmed, Waqar and Kazi, S.N. and Chowdhury, Z.Z. and Johan, Mohd Rafie (2021) One-pot sonochemical synthesis route for the synthesis of ZnO@TiO2/DW hybrid/composite nanofluid for enhancement of heat transfer in a square heat exchanger. Journal of Thermal Analysis and Calorimetry, 143 (2). pp. 1139-1155. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-020-09362-y.
Khan, G. and Basirun, Wan Jefrey and Kazi, S.N. and Ahmed, P. and Magaji, L. and Ahmed, S.M. and Khan, G.M. and Rehman, M.A. (2017) Electrochemical investigation on the corrosion inhibition of mild steel by Quinazoline Schiff base compounds in hydrochloric acid solution. Journal of Colloid and Interface Science, 502. pp. 134-145. ISSN 0021-9797, DOI https://doi.org/10.1016/j.jcis.2017.04.061.
Sadri, R. and Zangeneh Kamali, K. and Hosseini, M. and Zubir, M.N.M. and Kazi, S.N. and Ahmadi, G. and Dahari, M. and Huang, N.M. and Golsheikh, A.M. (2017) Experimental study on thermo-physical and rheological properties of stable and green reduced graphene oxide nanofluids: Hydrothermal assisted technique. Journal of Dispersion Science and Technology, 38 (9). pp. 1302-1310. ISSN 0193-2691, DOI https://doi.org/10.1080/01932691.2016.1234387.
Amiri, A. and Zubir, M.N.M. and Dimiev, A.M. and Teng, K.H. and Shanbedi, M. and Kazi, S.N. and Rozali, S. (2017) Facile, environmentally friendly, cost effective and scalable production of few-layered graphene. Chemical Engineering Journal, 326. pp. 1105-1115. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2017.06.046.
Sadri, R. and Hosseini, M. and Kazi, S.N. and Bagheri, S. and Zubir, M.N.M. and Solangi, K.H. and Zaharinie, T. and Badarudin, A. (2017) A bio-based, facile approach for the preparation of covalently functionalized carbon nanotubes aqueous suspensions and their potential as heat transfer fluids. Journal of Colloid and Interface Science, 504. pp. 115-123. ISSN 0021-9797, DOI https://doi.org/10.1016/j.jcis.2017.03.051.
Amiri, A. and Arzani, H.K. and Kazi, S.N. and Chew, B.T. and Badarudin, A. (2016) Backward-facing step heat transfer of the turbulent regime for functionalized graphene nanoplatelets based water-ethylene glycol nanofluids. International Journal of Heat and Mass Transfer, 97. pp. 538-546. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2016.02.042.
Oon, C.S. and Ateeq, M. and Shaw, A. and Wylie, S. and Al-Shamma'a, A. and Kazi, S.N. (2016) Detection of the gas–liquid two-phase flow regimes using non-intrusive microwave cylindrical cavity sensor. Journal of Electromagnetic Waves and Applications, 30 (17). pp. 2241-2255. ISSN 0920-5071, DOI https://doi.org/10.1080/09205071.2016.1244019.
Yarmand, H. and Gharehkhani, S. and Shirazi, S.F.S. and Amiri, A. and Alehashem, M.S. and Dahari, M. and Kazi, S.N. (2016) Experimental investigation of thermo-physical properties, convective heat transfer and pressure drop of functionalized graphene nanoplatelets aqueous nanofluid in a square heated pipe. Energy Conversion and Management, 114. pp. 38-49. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2016.02.008.
Arzani, H.K. and Amiri, A. and Kazi, S.N. and Chew, B.T. and Badarudin, A. (2016) Experimental investigation of thermophysical properties and heat transfer rate of covalently functionalized MWCNT in an annular heat exchanger. International Communications in Heat and Mass Transfer, 75. pp. 67-77. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2016.03.015.
Zubir, M.N.M. and Badarudin, A. and Kazi, S.N. and Misran, M. and Ibrahim, R. and Amiri, A. and Sadri, R. (2016) Exploration of the environmentally benign and highly effective approach for improving carbon nanotube homogeneity in aqueous system. Journal of Thermal Analysis and Calorimetry, 124 (2). pp. 815-825. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-015-5135-6.
Amiri, A. and Ahmadi, G. and Shanbedi, M. and Etemadi, M. and Zubir, M.N.M. and Chew, B.T. and Kazi, S.N. (2016) Heat transfer enhancement of water-based highly crumpled few-layer graphene nanofluids. RSC Advances, 6 (107). pp. 105508-105527. ISSN 2046-2069, DOI https://doi.org/10.1039/c6ra22365f.
Arzani, H.K. and Amiri, A. and Kazi, S.N. and Badarudin, A. and Chew, B.T. (2016) Heat transfer performance of water-based tetrahydrofurfuryl polyethylene glycol-treated graphene nanoplatelet nanofluids. RSC Advances, 6 (70). pp. 65654-65669. ISSN 2046-2069, DOI https://doi.org/10.1039/c6ra13301k.
Amiri, A. and Shanbedi, M. and Ahmadi, G. and Eshghi, H. and Kazi, S.N. and Chew, B.T. and Savari, M. and Zubir, M.N.M. (2016) Mass production of highly-porous graphene for high-performance supercapacitors. Scientific Reports, 6. p. 32686. ISSN 2045-2322, DOI https://doi.org/10.1038/srep32686.
Yarmand, H. and Gharehkhani, S. and Shirazi, S.F.S. and Amiri, A. and Montazer, E. and Arzani, H.K. and Sadri, R. and Dahari, M. and Kazi, S.N. (2016) Nanofluid based on activated hybrid of biomass carbon/graphene oxide: Synthesis, thermo-physical and electrical properties. International Communications in Heat and Mass Transfer, 72. pp. 10-15. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2016.01.004.
Yarmand, H. and Gharehkhani, S. and Shirazi, S.F.S. and Goodarzi, M. and Amiri, A. and Sarsam, W.S. and Alehashem, M.S. and Dahari, M. and Kazi, S.N. (2016) Study of synthesis, stability and thermo-physical properties of graphene nanoplatelet/platinum hybrid nanofluid. International Communications in Heat and Mass Transfer, 77. pp. 15-21. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2016.07.010.
Amiri, A. and Shanbedi, M. and Chew, B.T. and Kazi, S.N. and Solangi, K.H. (2016) Toward improved engine performance with crumpled nitrogen-doped graphene based water-ethylene glycol coolant. Chemical Engineering Journal, 289. pp. 583-595. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2015.12.083.
Zubir, M.N.M. and Badarudin, A. and Kazi, S.N. and Misran, M. and Amiri, A. and Sadri, R. and Khalid, S. (2015) Experimental investigation on the use of highly charged nanoparticles to improve the stability of weakly charged colloidal system. Journal of Colloid and Interface Science, 454. pp. 245-255. ISSN 0021-9797, DOI https://doi.org/10.1016/j.jcis.2015.05.019.
Kazi, S.N. and Teng, K.H. and Zakaria, M.S. and Sadeghinezhad, E. and Bakar, M.A. (2015) Study of mineral fouling mitigation on heat exchanger surface. Desalination, 367. pp. 248-254. ISSN 0011-9164, DOI https://doi.org/10.1016/j.desal.2015.04.011.
Kazi, S.N. and Duffy, G.G. and Chen, X.D. (2015) Heat transfer coefficient of flowing wood pulp fibre suspensions to monitor fibre and paper quality. Applied Thermal Engineering, 78. pp. 172-184. ISSN 1359-4311,
Kazi, S.N. and Badarudin, A. and Zubir, M.N.M. and Ming, H.N. and Misran, M. and Sadeghinezhad, E. and Mehrali, M. and Syuhada, N.I. (2015) Investigation on the use of graphene oxide as novel surfactant to stabilize weakly charged graphene nanoplatelets. Nanoscale Research Letters, 10. p. 15. ISSN 1931-7573, DOI https://doi.org/10.1186/s11671-015-0882-7.
Gharehkhani, S. and Sadeghinezhad, E. and Kazi, S.N. and Yarmand, H. and Badarudin, A. and Safaei, M.R. and Zubir, M.N. (2015) Basic effects of pulp refining on fiber properties- a review. Carbohydrate Polymers, 115. pp. 785-803. ISSN 0144-8617, DOI https://doi.org/10.1016/j.carbpol.2014.08.047.
Zubir, M.N.M. and Badarudin, A. and Kazi, S.N. and Huang, N.M. and Misran, M. and Sadeghinezhad, E. and Mehrali, M. and Syuhada, N.I. and Gharehkhani, S. (2015) Experimental investigation on the use of reduced graphene oxide and its hybrid complexes in improving closed conduit turbulent forced convective heat transfer. Experimental Thermal and Fluid Science, 66. pp. 290-303. ISSN 0894-1777, DOI https://doi.org/10.1016/j.expthermflusci.2015.03.022.
Yarmand, H. and Gharehkhani, S. and Ahmadi, G. and Shirazi, S.F.S. and Baradaran, S. and Montazer, E. and Zubir, M.N.M. and Alehashem, M.S. and Kazi, S.N. and Dahari, M. (2015) Graphene nanoplatelets–silver hybrid nanofluids for enhanced heat transfer. Energy Conversion and Management, 100. pp. 419-428. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.05.023.
Zare-Zardini, H. and Amiri, A. and Shanbedi, M. and Taheri-Kafrani, A. and Kazi, S.N. and Chew, B.T. and Razmjou, A. (2015) In vitroandin vivostudy of hazardous effects of Ag nanoparticles and Arginine-treated multi walled carbon nanotubes on blood cells: Application in hemodialysis membranes. Journal of Biomedical Materials Research Part A, 103 (9). pp. 2959-2965. ISSN 1549-3296, DOI https://doi.org/10.1002/jbm.a.35425.
Amiri, A. and Ahmadi, G. and Shanbedi, M. and Savari, M. and Kazi, S.N. and Chew, B.T. (2015) Microwave-Assisted Synthesis of Highly-Crumpled, Few-Layered Graphene and Nitrogen-Doped Graphene for Use as High-Performance Electrodes in Capacitive Deionization. Scientific Reports, 5. ISSN 2045-2322,
Amiri, A. and Shanbedi, M. and Ahmadi, G. and Eshghi, H. and Chew, B.T. and Kazi, S.N. (2015) Microwave-assisted direct coupling of graphene nanoplatelets with poly ethylene glycol and 4-phenylazophenol molecules for preparing stable-colloidal system. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 487. pp. 131-141. ISSN 0927-7757,
Amiri, A. and Sadri, R. and Ahmadi, G. and Chew, B.T. and Kazi, S.N. and Shanbedi, M. and Alehashem, M.S. (2015) Synthesis of polyethylene glycol-functionalized multi-walled carbon nanotubes with a microwave-assisted approach for improved heat dissipation. RSC Advances, 5 (45). pp. 35425-35434. ISSN 2046-2069, DOI https://doi.org/10.1039/c5ra02736e.
Sarsam, W.S. and Kazi, S.N. and Badarudin, A. (2015) A review of studies on using nanofluids in flat-plate solar collectors. Solar Energy, 122. pp. 1245-1265. ISSN 0038-092X, DOI https://doi.org/10.1016/j.solener.2015.10.032.
Rahmanian, B. and Safaei, M.R. and Kazi, S.N. and Ahmadi, G. and Oztop, H.F. and Vafai, K. (2014) Investigation of pollutant reduction by simulation of turbulent non-premixed pulverized coal combustion. Applied Thermal Engineering, 73 (1). pp. 1222-1235.
Hassan, M. and Sadri, R. and Ahmadi, G. and Dahari, M.B. and Kazi, S.N. and Safaei, M.R. and Sadeghinezhad, E. (2013) Numerical study of entropy generation in a flowing nanofluid used in micro-and minichannels. Entropy, 15 (1). pp. 144-155.
Hasanuzzaman, M. and Rahim, N.A. and Saidur, Rahman and Kazi, S.N. (2011) Energy savings and emissions reductions for rewinding and replacement of industrial motor. Energy, 36 (1). pp. 233-240. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2010.10.046.
Saidur, Rahman and Kazi, S.N. and Hossain, M.S. and Rahman, M.M. and Mohammed, H.A. (2011) A review on the performance of nanoparticles suspended with refrigerants and lubricating oils in refrigeration systems. Renewable and Sustainable Energy Reviews, 15 (1). pp. 310-323. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2010.08.018.
Kazi, S.N. and Duffy, G.G. and Chen, X.D. (2010) Mineral scale formation and mitigation on metals and a polymeric heat exchanger surface. Applied Thermal Engineering, 30 (14-15). pp. 2236-2242.
Leong, K.Y. and Saidur, Rahman and Kazi, S.N. and Mamun, A.H. (2010) Performance investigation of an automotive car radiator operated with nanofluid-based coolants (nanofluid as a coolant in a radiator). Applied Thermal Engineering, 30 (17-18). pp. 2685-2692. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2010.07.019.
Chew, B.T. and Kazi, S.N. and Amiri, A. (2015) Adaptive thermal comfort model for air-conditioned lecture halls in Malaysia. In: International Conference on Air Pollution and Control, 23-24 Feb 2015, Paris, France.
