Up a level |
Hosen, Md. Akter and Jumaat, Mohd Zamin and Islam, A. B. M. Saiful and Al Kaaf, Khalid Ahmed and Shammas, Mahaad Issa and Hakeem, Ibrahim Y. and Ul Islam, Mohammad Momeen (2023) Potential side-NSM strengthening approach to enhance the flexural performance of RC beams: Experimental, numerical and analytical investigations. Structural Engineering and Mechanics, 85 (2). pp. 179-195. ISSN 1225-4568, DOI https://doi.org/10.12989/sem.2023.85.2.179.
Teh, Tzyy Wooi and Tan, Chee Ghuan and Jumaat, Mohd Zamin (2022) Feasibility evaluation of novel high-damping rubbers as energy-dissipation material under axial dynamic load for damper devices. Buildings, 12 (11). ISSN 2075-5309, DOI https://doi.org/10.3390/buildings12111917.
Soong, Looi Sing and Liu, Michael Yong Jing and Yap, Soon Poh and Mo, Kim Hung and Jumaat, Mohd Zamin and Goh, Yingxin (2022) The potential of geopolymer in development of green coating materials: A review. Arabian Journal for Science and Engineering, 47 (10). pp. 12289-12299. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-022-06882-7.
Bashar, Iftekhair Ibnul and Alengaram, U. Johnson and Jumaat, Mohd Zamin (2022) Enunciation of embryonic palm oil clinker based geopolymer concrete and its engineering properties. Construction and Building Materials, 318. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2021.125975.
Hosen, Md. Akter and Shammas, Mahaad Issa and Shill, Sukanta Kumer and Al-Deen, Safat and Jumaat, Mohd Zamin and Hashim, Huzaifa (2022) Ductility enhancement of sustainable fibrous-reinforced high-strength lightweight concrete. Polymers, 14 (4). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14040727.
Alsubari, Belal and Shafigh, Payam and Jumaat, Mohd Zamin and Ghayeb, Haider Hamad and Alqawzai, Shagea (2022) Self-compacting concrete containing high volume palm oil fuel ash: cost, sustainability, and applications. International Journal of Sustainable Building Technology and Urban Development, 13 (2). 148 – 154. ISSN 2093761X, DOI https://doi.org/10.22712/susb.20220012.
Sumesh, Mathialagan and Alengaram, U. Johnson and Jumaat, Mohd Zamin and Mo, Kim Hung and Singh, Ramesh and Nayaka, Ramappa Ramesh and Srinivas, Karthick (2021) Chemo-physico-mechanical characteristics of high-strength alkali-activated mortar containing non-traditional supplementary cementitious materials. Journal of Building Engineering, 44. ISSN 2352-7102, DOI https://doi.org/10.1016/j.jobe.2021.103368.
Hosen, Md Akter and Shammas, Mahaad Issa and Shill, Sukanta Kumer and Jumaat, Mohd Zamin and Alengaram, U. Johnson and Ahmmad, Rasel and Althoey, Fadi and Islam, A. B. M. Saiful and Lin, Ying (2021) Investigation of structural characteristics of palm oil clinker based high-strength lightweight concrete comprising steel fibers. Journal of Materials Research and Technology-JMR&T, 15. pp. 6736-6746. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2021.11.105.
Nayaka, R. Ramesh and Alengaram, U. Johnson and Jumaat, Mohd Zamin and Fonseca, Fernando S. and Banerjee, Anish (2021) Structural performance of masonry prisms, wallettes and walls containing high volume of industrial by-products-Sustainable housing perspective. Construction and Building Materials, 303. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2021.124439.
Hosen, Md. Akter and Althoey, Fadi and Jumaat, Mohd Zamin and Alengaram, U. Johnson and Sulong, N. H. Ramli (2021) Flexural performance of RC beams strengthened with externally-side bonded reinforcement (E-SBR) technique using CFRP composites. Materials, 14 (11). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14112809.
Nayaka, Ramappa Ramesh and Alengaram, U. Johnson and Jumaat, Mohd Zamin and Yusoff, Sumiani and Ganasan, Reventheran (2021) Performance evaluation of engineering properties, radiation shielding, and sustainability of hollow masonry blocks produced using a high volume of industrial by-products. Journal of Materials in Civil Engineering, 33 (3). ISSN 0899-1561, DOI https://doi.org/10.1061/(ASCE)MT.1943-5533.0003558.
Obaydullah, M. and Jumaat, Mohd Zamin and Alengaram, U. Johnson and Kabir, Md Humayun and Rashid, Muhammad Harunur (2021) Combining EBR CFRP sheet with prestressed NSM steel strands to enhance the structural behavior of prestressed concrete beams. Journal of Civil Engineering and Management, 27 (8). pp. 637-650. ISSN 1392-3730, DOI https://doi.org/10.3846/jcem.2021.14905.
Obaydullah, M. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Kabir, Md Humayun and Rashid, Muhammad Harunur (2021) Strengthening of prestressed concrete beams using prestressed NSM CFRP bars to enhance structural performance. Jordan Journal of Civil Engineering, 15 (2). pp. 318-328. ISSN 1993-0461,
Mokhtar, Rohani and Ibrahim, Zainah and Jumaat, Mohd Zamin and Abd Hamid, Zuhairi and Rahim, Ahmad Hazim Abdul (2020) Behaviour of semi-rigid precast beam-to-column connection determined using static and reversible load tests. Measurement: Journal of the International Measurement Confederation, 164. ISSN 02632241, DOI https://doi.org/10.1016/j.measurement.2020.108007.
Hosen, MdAkter and Jumaat, Mohd Zamin and Alsubari, Belal and Sulong, N. H. Ramli and Ibrahim, Zainah and Alengaram, U. Johnson and Hashim, Huzaifa (2020) Effect of bonding materials on the flexural improvement in RC beams strengthened with SNSM technique using GFRP bars. Journal of Building Engineering, 32. ISSN 2352-7102, DOI https://doi.org/10.1016/j.jobe.2020.101777.
Yap, Soon Poh and Alengaram, Ubagaram Johnson and Mo, Kim Hung and Jumaat, Mohd Zamin (2019) Ductility behaviours of oil palm shell steel fibre-reinforced concrete beams under flexural loading. European Journal of Environmental and Civil Engineering, 23 (7). pp. 866-878. ISSN 2116-7214, DOI https://doi.org/10.1080/19648189.2017.1320234.
Jamadin, Adiza and Ibrahim, Zainah and Jumaat, Mohd Zamin and Wahab, Ezahtul Shahreen Ab (2019) Effect of High-cyclic Loads on Dynamic Response of Reinforced Concrete Slabs. KSCE Journal of Civil Engineering, 23 (3). pp. 1293-1301. ISSN 1226-7988, DOI https://doi.org/10.1007/s12205-019-0889-1.
Kamruzzaman, Mohamed and Jumaat, Mohd Zamin and Ramli Sulong, Nor Hafizah and Narmashiri, Kambiz and Ghaedi, Khaled and Hosen, Md Akter (2019) Experimental Investigation on Fatigue Behavior of Wide-Flange Steel I-Beams Strengthened Using Different CFRP End Cutting Shapes. International Journal of Steel Structures, 19 (3). pp. 760-768. ISSN 1598-2351, DOI https://doi.org/10.1007/s13296-018-0160-5.
Sumesh, Mathialagan and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Mo, Kim Hung (2019) Microstructural and Strength Characteristics of High-Strength Mortar Using Nontraditional Supplementary Cementitious Materials. Journal of Materials in Civil Engineering, 31 (4). 04019017. ISSN 0899-1561, DOI https://doi.org/10.1061/(ASCE)MT.1943-5533.0002626.
Nayaka, Ramappa Ramesh and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Yusoff, Sumiani and Ganasan, Reventheran (2019) Performance evaluation of masonry grout containing high volume of palm oil industry by-products. Journal of Cleaner Production, 220. pp. 1202-1214. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2019.02.134.
Alnahhal, Mohammed Fouad and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Abutaha, Fuad and Alqedra, Mamoun A. and Nayaka, Ramappa Ramesh (2018) Assessment on engineering properties and CO2 emissions of recycled aggregate concrete incorporating waste products as supplements to Portland cement. Journal of Cleaner Production, 203. pp. 822-835. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2018.08.292.
Mo, Kim Hung and Yeap, Kee Wei and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Bashar, Iftekhair Ibnul (2018) Bond strength evaluation of palm oil fuel ash-based geopolymer normal weight and lightweight concretes with steel reinforcement. Journal of Adhesion Science and Technology, 32 (1). pp. 19-35. ISSN 0169-4243, DOI https://doi.org/10.1080/01694243.2017.1336195.
Hosen, Md Akter and Jumaat, Mohd Zamin and Alengaram, Ubagaram Johnson and Ramli Sulong, Nor Hafizah (2018) CFRP strips for enhancing flexural performance of RC beams by SNSM strengthening technique. Construction and Building Materials, 165. pp. 28-44. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2017.12.052.
Hoque, Nusrat and Jumaat, Mohd Zamin (2018) Debonding failure analysis of prestressed FRP strengthened RC beams. Structural Engineering and Mechanics, 66 (4). pp. 543-555. ISSN 1225-4568, DOI https://doi.org/10.12989/sem.2018.66.4.543.
Aslam, Muhammad and Shafigh, Payam and Jumaat, Mohd Zamin (2018) Drying Shrinkage Strain of Palm-oil by-products Lightweight Concrete: A Comparison between Experimental and Prediction Models. KSCE Journal of Civil Engineering, 22 (12). pp. 4997-5008. ISSN 1226-7988, DOI https://doi.org/10.1007/s12205-017-0630-x.
Salam, Mohammed Abdus and Safiuddin, Md. and Jumaat, Mohd Zamin (2018) Durability Indicators for Sustainable Self-Consolidating High-Strength Concrete Incorporating Palm Oil Fuel Ash. Sustainability, 10 (7). p. 2345. ISSN 2071-1050, DOI https://doi.org/10.3390/su10072345.
Alnahhal, Mohammed Fouad and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Alsubari, Belal and Alqedra, Mamoun A. and Mo, Kim Hung (2018) Effect of aggressive chemicals on durability and microstructure properties of concrete containing crushed new concrete aggregate and non-traditional supplementary cementitious materials. Construction and Building Materials, 163. pp. 482-495. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2017.12.106.
Alsubari, Belal and Shafigh, Payam and Ibrahim, Zainah and Jumaat, Mohd Zamin (2018) Heat-treated palm oil fuel ash as an effective supplementary cementitious material originating from agriculture waste. Construction and Building Materials, 167. pp. 44-54. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2018.01.134.
Nayaka, Ramappa Ramesh and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Yusoff, Sumiani and Alnahhal, Mohammed Fouad (2018) High volume cement replacement by environmental friendly industrial by-product palm oil clinker powder in cement – lime masonry mortar. Journal of Cleaner Production, 190. pp. 272-284. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2018.03.291.
Nayaka, Ramappa Ramesh and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Yusoff, Sumiani (2018) Microstructural investigation and durability performance of high volume industrial by-products-based masonry mortars. Construction and Building Materials, 189. pp. 906-923. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2018.09.020.
Huda, Md Nazmul and Jumaat, Mohd Zamin and Islam, Abul Bashar Mohammad Saiful and Al-Kutti, Walid Abubaker (2018) Performance of high strength lightweight concrete using palm wastes. IIUM Engineering Journal, 19 (2). pp. 30-42. ISSN 1511-788X, DOI https://doi.org/10.31436/iiumej.v19i2.919.
Alsubari, Belal and Shafigh, Payam and Ibrahim, Zainah and Alnahhal, Mohammed Fouad and Jumaat, Mohd Zamin (2018) Properties of eco-friendly self-compacting concrete containing modified treated palm oil fuel ash. Construction and Building Materials, 158. pp. 742-754. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2017.09.174.
Mo, Kim Hung and Mohd Anor, Fatin Amirah and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Rao, K. Jagannadha (2018) Properties of metakaolin-blended oil palm shell lightweight concrete. European Journal of Environmental and Civil Engineering, 22 (7). pp. 852-868. ISSN 2116-7214, DOI https://doi.org/10.1080/19648189.2016.1229222.
Ong, Seng Kuan and Mo, Kim Hung and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Ling, Tung Chai (2018) Valorization of Wastes from Power Plant, Steel-Making and Palm Oil Industries as Partial Sand Substitute in Concrete. Waste and Biomass Valorization, 9 (9). pp. 1645-1654. ISSN 1877-2641, DOI https://doi.org/10.1007/s12649-017-9937-6.
Alnahhal, M.F. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Alqedra, M.A. and Mo, Kim Hung and Sumesh, M. (2017) Evaluation of Industrial By-Products as Sustainable Pozzolanic Materials in Recycled Aggregate Concrete. Sustainability, 9 (5). p. 767. ISSN 2071-1050, DOI https://doi.org/10.3390/su9050767.
Yap, Soon Poh and Alengaram, Ubagaram Johnson and Mo, Kim Hung and Jumaat, Mohd Zamin (2017) High strength oil palm shell concrete beams reinforced with steel fibres. Materiales de Construcción, 67 (328). p. 142. ISSN 0465-2746, DOI https://doi.org/10.3989/mc.2017.11616.
Sumesh, M. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Mo, Kim Hung and Alnahhal, M.F. (2017) Incorporation of nano-materials in cement composite and geopolymer based paste and mortar – A review. Construction and Building Materials, 148. pp. 62-84. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2017.04.206.
Aslam, M. and Shafigh, P. and Nomeli, M.A. and Jumaat, Mohd Zamin (2017) Manufacturing of high-strength lightweight aggregate concrete using blended coarse lightweight aggregates. Journal of Building Engineering, 13. pp. 53-62. ISSN 2352-7102, DOI https://doi.org/10.1016/j.jobe.2017.07.002.
Kabir, S.M.A. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Yusoff, Sumiani and Sharmin, A. and Bashar, I.I. (2017) Performance evaluation and some durability characteristics of environmental friendly palm oil clinker based geopolymer concrete. Journal of Cleaner Production, 161. pp. 477-492. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2017.05.002.
Mo, Kim Hung and Yeoh, K.H. and Bashar, I.I. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin (2017) Shear behaviour and mechanical properties of steel fibre-reinforced cement-based and geopolymer oil palm shell lightweight aggregate concrete. Construction and Building Materials, 148. pp. 369-375. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2017.05.017.
Aslam, M. and Shafigh, Payam and Jumaat, Mohd Zamin and Lachemi, M. (2016) Benefits of using blended waste coarse lightweight aggregates in structural lightweight aggregate concrete. Journal of Cleaner Production, 119. pp. 108-117. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2016.01.071.
Mo, Kim Hung and Visintin, P. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin (2016) Bond stress-slip relationship of oil palm shell lightweight concrete. Engineering Structures, 127. pp. 319-330. ISSN 0141-0296, DOI https://doi.org/10.1016/j.engstruct.2016.08.064.
Aslam, M. and Shafigh, Payam and Jumaat, Mohd Zamin (2016) Drying shrinkage behaviour of structural lightweight aggregate concrete containing blended oil palm bio-products. Journal of Cleaner Production, 127. pp. 183-194. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2016.03.165.
Ul Islam, M.M. and Mo, Kim Hung and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin (2016) Durability properties of sustainable concrete containing high volume palm oil waste materials. Journal of Cleaner Production, 137. pp. 167-177. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2016.07.061.
Bashar, I.I. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Islam, A. and Santhi, H. and Sharmin, A. (2016) Engineering properties and fracture behaviour of high volume palm oil fuel ash based fibre reinforced geopolymer concrete. Construction and Building Materials, 111. pp. 280-297. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.02.022.
Shafigh, Payam and Nomeli, M.A. and Alengaram, Ubagaram Johnson and Mahmud, Hilmi and Jumaat, Mohd Zamin (2016) Engineering properties of lightweight aggregate concrete containing limestone powder and high volume fly ash. Journal of Cleaner Production, 135. pp. 148-157. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2016.06.082.
Huda, M.N. and Jumaat, Mohd Zamin and Islam, A.B.M.S. (2016) Flexural performance of reinforced oil palm shell & palm oil clinker concrete (PSCC) beam. Construction and Building Materials, 127. pp. 18-25. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.09.106.
Ranjbar, N. and Behnia, A. and Chai, H.K. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin (2016) Fracture evaluation of multi-layered precast reinforced geopolymer-concrete composite beams by incorporating acoustic emission into mechanical analysis. Construction and Building Materials, 127. pp. 274-283. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.09.144.
Alam, M.A. and Alriyami, K. and Muda, Z.C. and Jumaat, Mohd Zamin (2016) Hybrid kenaf fibre composite plates for potential application in shear strengthening of reinforced concrete structure. Indian Journal of Science and Technology, 9 (6). pp. 1-7. ISSN 0974-6846, DOI https://doi.org/10.17485/ijst/2016/v9i6/77483.
Huda, M.N. and Jumaat, Mohd Zamin and Islam, A.B.M.S. and Soeb, M.R. (2016) Influence of palm oil factory wastes as coarse aggregate species for green lightweight concrete. Revista de la Construccion, 15 (3). pp. 133-139. ISSN 0717-7925, DOI https://doi.org/10.4067/s0718-915x2016000300013.
Ahmmad, R. and Jumaat, Mohd Zamin and Alengaram, Ubagaram Johnson and Bahri, S. and Rehman, M.A. and Hashim, H. (2016) Performance evaluation of palm oil clinker as coarse aggregate in high strength lightweight concrete. Journal of Cleaner Production, 112 (Part 1). pp. 566-574. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2015.08.043.
Obaydullah, M. and Jumaat, Mohd Zamin and Alengaram, Ubagaram Johnson and Darain, K.M.U. and Huda, M.N. and Hosen, M.A. (2016) Prestressing of NSM steel strands to enhance the structural performance of prestressed concrete beams. Construction and Building Materials, 129. pp. 289-301. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.10.077.
Alengaram, Ubagaram Johnson and Mohottige, N.H.W. and Wu, C. and Jumaat, Mohd Zamin and Yap, Soon Poh and Wang, Z. (2016) Response of oil palm shell concrete slabs subjected to quasi-static and blast loads. Construction and Building Materials, 116. pp. 391-402. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.04.103.
Yap, Soon Poh and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Khaw, K.R. (2016) Torsional and cracking characteristics of steel fiber-reinforced oil palm shell lightweight concrete. Journal of Composite Materials, 50 (1). pp. 115-128. ISSN 0021-9983, DOI https://doi.org/10.1177/0021998315571431.
Alsubari, B. and Shafigh, P. and Jumaat, Mohd Zamin (2016) Utilization of high-volume treated palm oil fuel ash to produce sustainable self-compacting concrete. Journal of Cleaner Production, 137. pp. 982-996. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2016.07.133.
Nouri, K. and Alam, M.A. and Mohammadhassani, M. and Jumaat, Mohd Zamin and Abna, A.H. (2015) Development of jute rope hybrid composite plate using carbon fibre. Structural Engineering and Mechanics, 56 (6). pp. 1095-1113. ISSN 1225-4568, DOI https://doi.org/10.12989/sem.2015.56.6.1095.
Alam, M.A. and Jumaat, Mohd Zamin (2015) Prevention of debonding failure of intermediate anchor to eliminate premature shear failure of flexurally strengthened reinforced concrete beams. Arabian Journal for Science and Engineering, 40 (8). pp. 2219-2232. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-015-1739-1.
Mo, K.H. and Alengaram, Ubagaram Johnson and Visintin, P. and Goh, S.H. and Jumaat, Mohd Zamin (2015) Influence of lightweight aggregate on the bond properties of concrete with various strength grades. Construction and Building Materials, 84. pp. 377-386. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.03.040.
Aslam, M. and Shafigh, P. and Jumaat, Mohd Zamin and Shah, S.N.R. (2015) Strengthening of RC beams using prestressed fiber reinforced polymers - A review. Construction and Building Materials, 82. pp. 235-256. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.02.051.
Alsubari, B. and Shafigh, P. and Jumaat, Mohd Zamin (2015) Development of self-consolidating high strength concrete incorporating treated palm oil fuel ash. Materials, 8 (5). pp. 2154-2173. ISSN 1996-1944, DOI https://doi.org/10.3390/ma8052154.
Qeshta, I.M.I. and Shafigh, P. and Jumaat, Mohd Zamin (2015) Flexural behaviour of RC beams strengthened with wire mesh-epoxy composite. Construction and Building Materials, 79. pp. 104-114. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.01.013.
Rahman, M.M. and Jumaat, Mohd Zamin and Rahman, M.A. and Qeshta, I.M.I. (2015) Innovative hybrid bonding method for strengthening reinforced concrete beam in flexure. Construction and Building Materials, 79. pp. 370-378. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2014.12.081.
Mo, K.H. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Yap, S.P. (2015) Feasibility study of high volume slag as cement replacement for sustainable structural lightweight oil palm shell concrete. Journal of Cleaner Production, 91. pp. 297-304. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2014.12.021.
Darain, K.M.U. and Jumaat, Mohd Zamin and Hossain, M.A. and Hosen, M.A. and Obaydullah, M. and Huda, M.N. and Hossain, I. (2015) Automated serviceability prediction of NSM strengthened structure using a fuzzy logic expert system. Expert Systems with Applications, 42 (1). pp. 376-389. ISSN 0957-4174, DOI https://doi.org/10.1016/j.eswa.2014.07.058.
Darain, K.M.U. and Jumaat, Mohd Zamin and Hossain, M.A. and Hosen, M.A. and Obaydullah, M. and Huda, M.N. and Hossain, I. (2015) Automated serviceability prediction of NSM strengthened structure using a fuzzy logic expert system. Expert Systems with Applications, 42 (1). pp. 376-389. ISSN 0957-4174, DOI https://doi.org/10.1016/j.eswa.2014.07.058.
Foong, K.Y. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Mo, K.H. (2015) Enhancement of the mechanical properties of lightweight oil palm shell concrete using rice husk ash and manufactured sand. Journal of Zhejiang University Science A, 16 (1). pp. 59-69. ISSN 1673-565X, DOI https://doi.org/10.1631/jzus.A1400175.
Jumaat, Mohd Zamin and Alengaram, Ubagaram Johnson and Ahmmad, R. and Bahri, S. and Islam, A.B.M.S. (2015) Characteristics of palm oil clinker as replacement for oil palm shell in lightweight concrete subjected to elevated temperature. Construction and Building Materials, 101 (pt.1). pp. 942-951. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.10.104.
Behnia, A. and Chai, Hwa Kian and Ranjbar, N. and Jumaat, Mohd Zamin (2015) Damage detection of SFRC concrete beams subjected to pure torsion by integrating acoustic emission and Weibull damage function. Structural Control and Health Monitoring, 23 (1). pp. 51-68. ISSN 1545-2255, DOI https://doi.org/10.1002/stc.1753.
Yap, Soon Poh and Khaw, K.R. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin (2015) Effect of fibre aspect ratio on the torsional behaviour of steel fibre-reinforced normal weight concrete and lightweight concrete. Engineering Structures, 101. pp. 24-33. ISSN 0141-0296, DOI https://doi.org/10.1016/j.engstruct.2015.07.007.
Hosen, M.A. and Jumaat, Mohd Zamin and Islam, A.B.M.S. and Kamruzzaman, M. and Huda, M.N. and Soeb, M.R. (2015) Eliminating concrete cover separation of NSM strengthened beams by CFRP end anchorage. Structural Engineering and Mechanics, 56 (6). pp. 899-916. ISSN 1225-4568, DOI https://doi.org/10.12989/sem.2015.56.6.899.
Islam, A. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Bashar, I.I. and Kabir, S.M.A. (2015) Engineering properties and carbon footprint of ground granulated blast-furnace slag-palm oil fuel ash-based structural geopolymer concrete. Construction and Building Materials, 101 (1). pp. 503-521. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.10.026.
Hosen, M.A. and Jumaat, Mohd Zamin and Islam, A.B.M.S. (2015) Inclusion of CFRP - epoxy composite for end anchorage in NSM-epoxy strengthened beams. Advances in Materials Science and Engineering. p. 10. ISSN 1687-8434,
Kabir, S.M.A. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Sharmin, A. and Islam, A. (2015) Influence of molarity and chemical composition on the development of compressive strength in POFA based geopolymer mortar. Advances in Materials Science and Engineering. p. 15. ISSN 1687-8434, DOI https://doi.org/10.1155/2015/647071.
Yap, Soon Poh and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Khaw, Kuan Ren (2015) Torsional behaviour of steel fibre-reinforced oil palm shell concrete beams. Materials & Design, 87. pp. 854-862. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2015.08.078.
Shafigh, P. and Jumaat, Mohd Zamin and Mahmud, Hilmi and Alengaram, Ubagaram Johnson (2013) Oil palm shell lightweight concrete containing high volume ground granulated blast furnace slag. Construction and Building Materials, 40. pp. 231-238. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.10.007.
Islam, A.B.M.S. and Jameel, Mohammed and Jumaat, Mohd Zamin and Rahman, M.M. (2013) Optimization in structural altitude for seismic base isolation at medium risk earthquake disaster region. Disaster Advances, 6 (1). pp. 23-34. ISSN 0974-262X,
Alengaram, Ubagaram Johnson and Muhit, B.A.A and Jumaat, Mohd Zamin (2013) Utilization of oil palm kernel shell as lightweight aggregate in concrete - a review. Construction and Building Materials, 38. pp. 161-172. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.08.026.
Islam, A.B.M. and Jameel, Mohammed and Uddin, Md Alhaz and Jumaat, Mohd Zamin (2012) Competent building elevation for incorporating base isolation in aseismic structure. Procedia EngineeringInternational Conference on Advances Science and Contemporary Engineering 2012, 50. pp. 882-892. ISSN 1877-7058,
Mohammadhassani, M. and Jumaat, Mohd Zamin and Jameel, M. and Badiee, H. and Arumugam, A.M.S. (2012) Ductility and performance assessment of high strength self compacting concrete (HSSCC) deep beams: an experimental investigation. Nuclear Engineering and Design, 250. pp. 116-124. ISSN 0029-5493, DOI https://doi.org/10.1016/j.nucengdes.2012.05.005.
Shafigh, P. and Jumaat, Mohd Zamin and Mahmud, H.B. (2012) Effect of replacement of normal weight coarse aggregate with oil palm shell on properties of concrete. Arabian Journal for Science and Engineering, 37 (4). pp. 955-964. ISSN 13198025, DOI https://doi.org/10.1007/s13369-012-0233-2.
Mohammadhassani, M. and Jumaat, Mohd Zamin and Jameel, M. (2012) Experimental investigation to compare the modulus of rupture in high strength self compacting concrete deep beams and high strength concrete normal beams. Construction and Building Materials, 30. pp. 265-273. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2011.12.004.
Alam, M.A. and Jumaat, Mohd Zamin (2012) Experimental investigations on U- and L-shaped end anchored CFRP laminate strengthened reinforced concrete beams. Arabian Journal for Science and Engineering, 37 (4). pp. 905-919. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-012-0213-6.
Narmashiri, K. and Ramli Sulong, Nor Hafizah and Jumaat, Mohd Zamin (2012) Failure analysis and structural behaviour of CFRP strengthened steel I-beams. Construction and Building Materials, 30. pp. 1-9. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2011.11.009.
Safiuddin, M. and Jumaat, Mohd Zamin and Salam, M.A. (2012) Flowing ability of self-consolidating concrete and its binder paste phase including palm oil fuel ash. Magazine of Concrete Research, 64 (10). pp. 931-944. ISSN 0024-9831, DOI https://doi.org/10.1680/macr.11.00135.
Shafigh, P. and Jumaat, Mohd Zamin and Bin Mahmud, H. and Hamid, N.A.A. (2012) Lightweight concrete made from crushed oil palm shell: tensile strength and effect of initial curing on compressive strength. Construction and Building Materials, 27 (1). pp. 252-258. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2011.07.051.
Islam, A.B.M.S. and Hussain, Raja Rizwan and Jameel, Mohammed and Jumaat, Mohd Zamin (2012) Non-linear time domain analysis of base isolated multi-storey building under site specific bi-directional seismic loading. Automation in Construction, 22. pp. 554-566. ISSN 0926-5805, DOI https://doi.org/10.1016/j.autcon.2011.11.017.
Jameel, A.B.M.M. and Islam, S. and Khaleel, M. and Jumaat, Mohd Zamin (2012) Nonlinear finite element analysis of spar platform. Advanced Science Letters, 13 (1). pp. 723-726. ISSN 19366612, DOI https://doi.org/10.1166/asl.2012.3851.
Islam, A.B.M.S. and Jameel, M. and Jumaat, Mohd Zamin (2012) Oil and gas energy potential at Malaysian seabed and spar platform for deepwater installation. International Journal of Green Energy, 9 (2). pp. 111-120. ISSN 1543-5075, DOI https://doi.org/10.1080/15435075.2011.621493.
Shafigh, Payam and Mahmud, Hilmi and Jumaat, Mohd Zamin (2012) Oil palm shell lightweight concrete as a ductile material. Materials & Design, 36. pp. 650-654. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.12.003.
Safiuddin, M. and Rahman, M.M. and Salam, M.A. and Md.Isa, M.H. and Jumaat, Mohd Zamin (2012) Properties of self-consolidating palm oil fuel ash concrete. Advanced Science Letters, 17 (1). pp. 312-319. ISSN 19366612, DOI https://doi.org/10.1166/asl.2012.4268.
Islam, A.B.M. and Jameel, Mohammed and Jumaat, Mohd Zamin and Shirazi, S.M. and Salman, Firas A. (2012) Review of offshore energy in Malaysia and floating spar platform for sustainable exploration. Renewable and Sustainable Energy Reviews, 16 (8). pp. 6268-6284. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.07.012.
Abdul Wahab, M.J. and Jumaat, Mohd Zamin and Mohamad Khaidzir, M.O. (2012) Statistical technique for grouping tropical timbers into similar strength groups. Modern Applied Science, 6 (3). pp. 73-80. ISSN 1913-1852, DOI https://doi.org/10.5539/mas.v6n3p73.
Narmashiri, Kambiz and Jumaat, Mohd Zamin and Ramli Sulong, Nor Hafizah (2012) Strengthening of steel I-beams using CFRP strips: an investigation on CFRP bond length. Advances in Structural Engineering, 15 (12). pp. 2191-2204. ISSN 1369-4332, DOI https://doi.org/10.1260/1369-4332.15.12.2191.
Razavi, S.V. and Jumaat, Mohd Zamin and Ahmed, E.S.H. and Mohammadi, P. (2012) Using generalized regression neural network (GRNN) for mechanical strength prediction of lightweight mortar. Computers and Concrete, 10 (4). pp. 379-390. ISSN 15988198,
Jameel, M. and Islam, A.B.M. and Salman, F.A. and Khaleel, M. and Jumaat, Mohd Zamin (2012) Wave data for shallow and deep water sedimentary basins of Malaysia. Advanced Science Letters, 14 (1). pp. 360-364. ISSN 1936-6612, DOI https://doi.org/10.1166/asl.2012.3964.
Razavi, S.V. and Jumaat, Mohd Zamin and Ei-Shafie, A.H. and Mohammadi, P. (2011) Artificial neural networks for mechanical strength prediction of lightweight mortar. Scientific Research and Essays, 6 (16). pp. 3406-3417. ISSN 19922248, DOI https://doi.org/10.5897/SRE11.311.
Mohammadhassani, M. and Jumaat, Mohd Zamin and Maghsoudi, A.A. and Akib, S. and Mohamed, J. and Najmeh, R. and Amin, M. and Hamid, S. and Esmaeil, H.R. and Farhad, G. (2011) Bending stiffness and neutral axis depth variation of high strength concrete beams in seismic hazardous areas: experimental investigation. International Journal of the Physical Sciences, 6 (3). pp. 482-494. ISSN 1992-1950, DOI https://doi.org/10.5897/IJPS10.694.
Saiful Islam, A.B.M. and Jameel, M. and Rahman, M.A. and Jumaat, Mohd Zamin (2011) Earthquake time history for Dhaka, Bangladesh as competent seismic record. International Journal of Physical Sciences, 6 (16). pp. 3921-3926. ISSN 19921950, DOI https://doi.org/10.5897/IJPS11.702.
Shafigh, Payam and Mahmud, Hilmi and Jumaat, Mohd Zamin (2011) Effect of steel fiber on the mechanical properties of oil palm shell lightweight concrete. Materials & Design, 32 (7). pp. 3926-3932. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.02.055.
Saiful Islam, A.B.M. and Jameel, M. and Jumaat, Mohd Zamin (2011) Effect of time elapse after wave hitting on coupled spar platform. International Journal of Physical Sciences, 6 (11). pp. 2671-2680. ISSN 19921950, DOI https://doi.org/10.5897/AJBM11.454.
Safiuddin, M.D. and Salam, M.A. and Jumaat, Mohd Zamin (2011) Effects of recycled concrete aggregate on the fresh properties of self-consolidating concrete. Archives of Civil and Mechanical Engineering, 11 (4). pp. 1023-1041. ISSN 16449665,
Safiuddin, M. and Mahmud, H.B. and Jumaat, Mohd Zamin (2011) Efficacy of ASTM saturation techniques for measuring the water absorption of concrete. Arabian Journal for Science and Engineering, 36 (5). pp. 761-768. ISSN 1319-8025, DOI https://doi.org/10.1007/s13369-011-0080-6.
Islam, A. and Jameel, M. and Ahmad, Syed Ishtiaq and Salman, F.A. and Jumaat, Mohd Zamin (2011) Engendering earthquake response spectra for Dhaka region usable in dynamic analysis of structures. Scientific Research and Essays, 6 (16). pp. 3519-3530. ISSN 1992-2248, DOI https://doi.org/10.5897/SRE11.218.
Alengaram, Ubagaram Johnson and Mahmud, Hilmi and Jumaat, Mohd Zamin (2011) Enhancement and prediction of modulus of elasticity of palm kernel shell concrete. Materials & Design, 32 (4). pp. 2143-2148. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2010.11.035.
Mohammadhassani, M. and Jumaat, Mohd Zamin and Ashour, A. and Jameel, M. (2011) Failure modes and serviceability of high strength self compacting concrete deep beams. Engineering Failure Analysis, 18 (8). pp. 2272-2281. ISSN 1350-6307, DOI https://doi.org/10.1016/j.engfailanal.2011.08.003.
Narmashiri, K. and Ramli Sulong, Nor Hafizah and Jumaat, Mohd Zamin (2011) Flexural strengthening of steel I-beams by using CFRP strips. International Journal of Physical Sciences, 6 (7). pp. 1620-1627. ISSN 19921950, DOI https://doi.org/10.5897/IJPS11.140.
Safiuddin, M. and Md. Isa, M.H. and Jumaat, Mohd Zamin (2011) Fresh properties of self-consolidating concrete incorporating palm oil fuel ash as a supplementary cementing material. Chiang Mai Journal of Science, 38 (3). pp. 389-404. ISSN 01252526 ,
Razavi, S.V. and Jumaat, Mohd Zamin and Ei-Shafie, A.H. and Mohammadi, P. (2011) General regression neural network (GRNN) for the first crack analysis prediction of strengthened RC one-way slab by CFRP. International Journal of Physical Sciences, 6 (10). pp. 2439-2446. ISSN 19921950, DOI https://doi.org/10.5897/IJPS10.578.
Narmashiri, K. and Jumaat, Mohd Zamin and Ramli Sulong, Nor Hafizah (2011) Local stiffening of steel I-beams by using CFRP materials. Advanced Materials Research, 163. pp. 3838-3843. ISSN 0878492062, DOI https://doi.org/10.4028/www.scientific.net/AMR.163-167.3838.
Far, M.R.H. and Jumaat, Mohd Zamin and Vahid Razavi T., S. and Mohammadi, P. and Mohammadi, H. (2011) Nonlinear analysis of load-deflection testing of reinforced one-way slab strengthened by carbon fiber reinforced polymer (CFRP) and using artificial neural network (ANN) for prediction. International Journal of Physical Sciences, 6 (13). pp. 3054-3061. ISSN 19921950, DOI https://doi.org/10.5897/IJPS11.553.
Shafigh, P. and Jumaat, Mohd Zamin and Mahmud, H. (2011) Oil palm shell as a lightweight aggregate for production high strength lightweight concrete. Construction and Building Materials, 25 (4). pp. 1848-1853. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2010.11.075.
Jumaat, Mohd Zamin and Alam, M.A. (2011) Optimization of intermediate anchors to eliminate premature shear failure of CFRP laminate flexurally strengthened R.C beams. International Journal of Physical Sciences, 6 (2). pp. 182-192. ISSN 19921950, DOI https://doi.org/10.5897/IJPS10.158.
Jumaat, Mohd Zamin and Rahman, M.A. and Alam, M.A. and Rahman, M.M. (2011) Premature failures in plate bonded strengthened RC beams with an emphasis on premature shear: a review. International Journal of Physical Sciences, 6 (2). pp. 156-168. ISSN 19921950, DOI https://doi.org/10.5897/IJPS10.369.
Safiuddin, M. and Alengaram, Ubagaram Johnson and Salam, M.A. and Jumaat, Mohd Zamin and Jaafar, F.F. and Saad, H.B. (2011) Properties of high-workability concrete with recycled concrete aggregate. Materials Research-Ibero-American Journal of Materials, 14 (2). pp. 248-255. ISSN 1516-1439, DOI https://doi.org/10.1590/S1516-14392011005000039.
Narmashiri, K. and Jumaat, Mohd Zamin (2011) Reinforced steel I-beams: a comparison between 2D and 3D simulation. Simulation Modelling Practice and Theory, 19 (1). pp. 564-585. ISSN 1569-190X, DOI https://doi.org/10.1016/j.simpat.2010.08.012.
Jumaat, Mohd Zamin and Rahman, M.M. and Rahman, M.A. (2011) Review on bonding techniques of CFRP in strengthening concrete structures. International Journal of Physical Sciences, 6 (15). pp. 3567-3575. ISSN 19921950, DOI https://doi.org/10.5897/IJPS10.376.
Islam, A. and Jameel, M. and Jumaat, Mohd Zamin (2011) Seismic isolation in buildings to be a practical reality: behavior of structure and installation technique. Journal of Engineering and Technology Research, 3 (4). pp. 99-117. ISSN 2006-9790,
Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Mahmud, H. and Fayyadh, M.M. (2011) Shear behaviour of reinforced palm kernel shell concrete beams. Construction and Building Materials, 25 (6). pp. 2918-2927. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2010.12.032.
Saiful Islam, A.B.M. and Jameel, M. and Jumaat, Mohd Zamin and Shirazi, S.M. (2011) Spar platform at deep water region in Malaysian sea. International Journal of Physical Sciences, 6 (30). pp. 6872-6881. ISSN 19921950, DOI https://doi.org/10.5897/IJPS11.571.
Saiful Islam, A.B.M. and Jameel, M. and Ahmad, Syed Ishtiaq and Jumaat, Mohd Zamin (2011) Study on corollary of seismic base isolation system on buildings with soft storey. International Journal of Physical Sciences, 6 (11). pp. 2654-2661. ISSN 19921950, DOI https://doi.org/10.5897/AJBM10.516.
Islam, A.B.M.S. and Jameel, Mohammed and Ahmad, Syed Ishtiaq and Jumaat, Mohd Zamin (2011) Study on corollary of seismic base isolation system on buildings with soft story. International Journal of the Physical Sciences, 6 (11). pp. 2654-2661. ISSN 1992-1950,
Razavi, S.V. and Jumaat, Mohd Zamin and Ei-Shafie, A.H. (2011) Using feed-forward back propagation (FFBP) neural networks for compressive strength prediction of lightweight concrete made with different percentage of scoria instead of sand. International Journal of Physical Sciences, 6 (6). pp. 1325-1331. ISSN 19921950, DOI https://doi.org/10.5897/IJPS11.204.
Safiuddin, M. and Salam, M.A. and Jumaat, Mohd Zamin (2011) Utilization of palm oil fuel ash in concrete: a review. Journal of Civil Engineering and Management, 17 (2). pp. 234-247. ISSN 13923730, DOI https://doi.org/10.3846/13923730.2011.574450.
Mohammadhassani, M. and Jumaat, Mohd Zamin and Chemrouk, M. and Maghsoudi, A.A. and Jameel, M. and Akib, S. (2011) An experimental investigation on bending stiffness and neutral axis depth variation of over-reinforced high strength concrete beams. Nuclear Engineering and Design, 241 (6). pp. 2060-2067. ISSN 0029-5493, DOI https://doi.org/10.1016/j.nucengdes.2011.02.022.
Kobraei, M. and Jumaat, Mohd Zamin and Shafigh, P. (2011) An experimental study on shear reinforcement in RC beams using CFRP-bars. Scientific Research and Essays, 6 (16). pp. 3447-3460. ISSN 19922248, DOI https://doi.org/10.5897/SRE11.650.
Shafigh, Payam and Jumaat, Mohd Zamin and Mahmud, Hilmi and Alengaram, Ubagaram Johnson (2011) A new method of producing high strength oil palm shell lightweight concrete. Materials & Design, 32 (10). pp. 4839-4843. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.06.015.
Alengaram, Ubagaram Johnson and Mahmud, Hilmi and Jumaat, Mohd Zamin (2010) Comparison of mechanical and bond properties of oil palm kernel shell concrete with normal weight concrete. International Journal of the Physical Sciences, 5 (8). pp. 1231-1239. ISSN 1992-1950,
Alengaram, Ubagaram Johnson and Mahmud, Hilmi and Jumaat, Mohd Zamin and Shirazi, S.M. (2010) Effect of aggregate size and proportion on strength properties of palm kernel shell concrete. International Journal of the Physical Sciences, 5 (12). pp. 1848-1856. ISSN 1992-1950,
Jumaat, Mohd Zamin and Alam, Md Ashraful (2010) Experimental and numerical analysis of end anchored steel plate and CFRP laminate flexurally strengthened r. c. beams. International Journal of the Physical Sciences, 5 (2). pp. 132-144. ISSN 1992-1950,
Jumaat, Mohd Zamin and Rahman, M.M. and Alam, M.A. (2010) Flexural strengthening of RC continuous T beam using CFRP laminate: a review. International Journal of the Physical Sciences, 5 (6). pp. 619-625. ISSN 1992-1950,
Narmashiri, K. and Jumaat, Mohd Zamin and Sulong, N.H.R. (2010) Investigation on end anchoring of CFRP strengthened steel I-beams. International Journal of the Physical Sciences, 5 (9). pp. 1360-1371. ISSN 1992-1950,
Shafigh, P. and Jumaat, Mohd Zamin and Mahmud, H. (2010) Mix design and mechanical properties of oil palm shell lightweight aggregate concrete: a review. International Journal of the Physical Sciences, 5 (14). pp. 2127-2134. ISSN 1992-1950,
Dhananjaya, H.R. and Nagabhushanam, J. and Pandey, P.C. and Jumaat, Mohd Zamin (2010) New twelve node serendipity quadrilateral plate bending element based on mindlin-reissner theory using integrated force method. Structural Engineering and Mechanics, 36 (5). pp. 625-642. ISSN 1225-4568,
Narmashiri, K. and Jumaat, Mohd Zamin (2010) Numerical study on strengthening composite bridges. Challenges, Opportunities and Solutions in Structural Engineering and Construction. pp. 241-246. ISSN 978-0-415-56809-8, DOI https://doi.org/10.1201/9780203859926.ch37.
Islam, A.B.M.S. and Ahmad, Syed Ishtiaq and Jameel, M. and Jumaat, Mohd Zamin (2010) Seismic base isolation for buildings in regions of low to moderate seismicity: practical alternative design. Practice Periodical on Structural Design and Construction, 17 (1). pp. 13-20. ISSN 1084-0680, DOI https://doi.org/10.1061/(ASCE)SC.1943-5576.0000093 .
Narmashiri, K. and Jumaat, Mohd Zamin and Sulong, N.H.R. (2010) Shear strengthening of steel I-beams by using CFRP strips. Scientific Research and Essays, 5 (16). pp. 2155-2168. ISSN 1992-2248,
Jumaat, Mohd Zamin and Kabir, M.H. and Obaydullah, M. (2010) Structural performance of reinforced concrete beams repairing from spalling. European Journal of Scientific Research, 45 (1). pp. 89-102. ISSN 1450216X,
Safiuddin, Md. and Jumaat, Mohd Zamin and Salam, M.A. and Islam, M.S. and Hashim, Roslan (2010) Utilization of solid wastes in construction materials. International Journal of Physical Sciences, 5 (13). pp. 1952-1963. ISSN 1992-1950,
Chitsazan, I. and Kobraei, M. and Jumaat, Mohd Zamin and Shafigh, P. (2010) An experimental study on the flexural behaviour of FRP RC bemas and comparison of the ultimate moment capacity with ACI. Journal of Civil Engineering and Construction Technology, 1 (2). pp. 27-42. ISSN 2141-2634,
Alam, A. and Jumaat, Mohd Zamin (2009) Effects of intermediate anchors on end anchored carbon fibre reinforced polymer laminate flexurally strengthened reinforced concrete beams. Journal of Applied Sciences, 9 (1). pp. 142-148. ISSN 18125654, DOI https://doi.org/10.3923/jas.2009.142.148.
Alam, M.A. and Jumaat, Mohd Zamin (2009) Eliminating premature end peeling of flexurally strengthened reinforced concrete beams. Journal of Applied Sciences, 9 (6). pp. 1106-1113. ISSN 18125654, DOI https://doi.org/10.3923/jas.2009.1106.1113.
Mahmud, Hilmi and Jumaat, Mohd Zamin and Alengaram, U.J. (2009) Influence of sand/cement ratio on mechanical properties of palm kernel shell concrete. Journal of Applied Sciences, 9 (9). pp. 1764-1769. ISSN 18125654, DOI https://doi.org/10.3923/jas.2009.1764.1769.
Jumaat, Mohd Zamin and Alengaram, Ubagaram Johnson and Mahmud, Hilmi (2009) Shear strength of oil palm shell foamed concrete beams. Materials & Design, 30 (6). pp. 2227-2236. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2008.09.024.
Jumaat, Mohd Zamin and Alam, Md Ashraful (2009) Strengthening of R.C. beams using externally bonded plates and anchorages. Australian Journal of Basic and Applied Sciences, 3 (3). pp. 2207-2211. ISSN 1991-8178,
Jumaat, Mohd Zamin and Alam, M.A. (2008) Behaviour of U and L shaped end anchored steel plate strengthened reinforced concrete beams. European Journal of Scientific Research, 22 (2). pp. 184-196. ISSN 1450216X,
Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Mahmud, H. (2008) Ductility behaviour of reinforced palm kernel shell concrete beams. European Journal of Scientific Research, 23 (3). pp. 406-420. ISSN 1450216X,
Alam, A. and Jumaat, Mohd Zamin (2008) "Experimental and analytical investigations on the structural behavoiur of steel plate and cfrp laminate flexurally strengthened r.c. beams". Journal of Applied Sciences, 8 (23). 4383-4389. ISSN 1812-5654, DOI https://doi.org/10.3923/jas.2008.4383.4389 .
Alengaram, U.J. and Jumaat, Mohd Zamin and Mahmud, H. (2008) Influence of cementitious materials and aggregates content on compressive strength of palm kernel shell concrete. Journal of Applied Sciences, 8 (18). pp. 3207-3213. ISSN 18125654, DOI https://doi.org/10.3923/jas.2008.3207.3213.
Jumaat, Mohd Zamin and Alam, Md Ashraful (2008) Strengthening of RC beams using externally bonded plates and anchorages. Australian Journal of Basic and Applied Sciences, 3 (3). pp. 2207-2211. ISSN 1991-8178,
Jumaat, Mohd Zamin and Alam, M.A. (2006) Problems associated with plate bonding methods of strengthening reinforced concrete beams. Journal of Applied Sciences Research, 2 (10). pp. 703-708. DOI https://www.aensiweb.com/jasr/jasr/2006/703-708.pdf.
Jumaat, Mohd Zamin and Rahim, A.H.A. and Othman, J. and Midon, M.S. (2006) Strength evaluation of oil palm stem trussed rafters. Construction and Building Materials, 20 (9). pp. 812-818. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2005.01.049.
Jumaat, Mohd Zamin and Kabir, M.H. and Obaydullah, M. (2006) A review of the repair of reinforced concrete beams. Journal of Applied Science Research, 2 (6). pp. 317-326.
Jumaat, Mohd Zamin and Murty, B. (2004) Yield load prediction of nailed timber joints using nail diameter and timber specific gravity. Wood Science and Technology, 38 (8). pp. 599-615. ISSN 0043-7719, DOI https://doi.org/10.1007/s00226-004-0261-5.
Al-Kubaisy, M.A. and Jumaat, Mohd Zamin (2000) Ferrocement laminate strengthens RC beams. Concrete International, 22 (10). pp. 37-43. ISSN 0162-4075,
Al-Kubaisy, M.A. and Jumaat, Mohd Zamin (2000) Flexural behaviour of reinforced concrete slabs with ferrocement tension zone cover. Construction and Building Materials, 14 (5). pp. 245-252. ISSN 0950-0618, DOI https://doi.org/10.1016/S0950-0618(00)00019-2.
Jumaat, Mohd Zamin (1991) Analysis of built-up timber columns using matrix progression method. Journal of Structural Engineering, 117 (7). pp. 1911-1928. ISSN 0733-9445, DOI https://doi.org/10.1061/(ASCE)0733-9445(1991)117:7(1911).
Nayaka, R. Ramesh and Alengaram, U. Johnson and Jumaat, Mohd Zamin and Rao, K. Balakrishna (2021) Eco-friendly masonry products for affordable housing—perspective of positive social impact. In: 2019 International Conference on Sustainable Design, Engineering, Management and Sciences, ICSDEMS 2019, 16-17 October 2019, Kuala Lumpur.
Alengaram, Ubagaram Johnson and Mohottige, H.W.N. and Wu, C.Q. and Jumaat, Mohd Zamin and Yap, Soon Poh and Wang, Z.Q. (2016) Ductile behaviour of oil palm shell concrete slabs subjected to blast loads. In: Proceedings of the 4th International Conference on Protective Structures, 18 - 21 October 2016, Beijing, China.
Safiuddin, M. and Salam, M.A. and Jumaat, Mohd Zamin (2012) Correlations between different hardened properties of high-strength self-consolidating concrete including palm oil fuel ash. In: 2011 International Conference on Applied Mechanics, Materials and Manufacturing, ICAMMM 2011, 2012, Shenzhen.
Rahman, M.M. and Jumaat, Mohd Zamin (2012) Cost minimum proportioning of non-Slump concrete mix using genetic algorithms. In: 3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012, 2012, Xiamen.
Mohammadhassani, M. and Jumaat, Mohd Zamin and Jameel, M. and Hakim, S.J.S. and Abdollahi, N. (2012) Experimental study on the strain contribution of horizontal and vertical web reinforced bar of HSSCC deep beams. In: 5th International Conference on Emerging Technologies in Non-Destructive Testing, NDT, 2012, Ioannina.
Rahman, M.M. and Jumaat, Mohd Zamin and Hosen, M.A. (2012) Genetic algorithm for material cost minimization of external strengthening system with fiber reinforced polymer. In: 3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012, 2012, Xiamen.
Safiuddin, M. and Salam, M.A. and Jumaat, Mohd Zamin (2011) Correlations between fresh properties of self-consolidating concrete including palm oil fuel ash. In: 1st International Conference on Civil Engineering, Architecture and Building Materials, CEABM 2011, Haikou.
Narmashiri, K. and Jumaat, Mohd Zamin and Sulong, N.H.R. (2011) Failure modes of CFRP flexural strengthened steel I-beams. In: 8th International Conference on Composite Science and Technology, ICCST8, 2011, Kuala Lumpur.
Narmashiri, K. and Jumaat, Mohd Zamin and Sulong, N.H.R. (2011) Local stiffening of steel I-beams by using CFRP materials. In: 2011 International Conference on Structures and Building Materials, ICSBM 2011, 2011, Guangzhou.
Jameel, Mohammed and Ahmad, Suhail and Islam, Abul Bashar Mohammad Saiful and Jumaat, Mohd Zamin (2011) Nonlinear analysis of fully coupled integrated spar-mooring line system. In: Int. Offshore Polar Engineering Conference (ISOPE 2011). Maui, Hawii, 2011, Maui, Hawaii, USA.
Mohammad, M. and Jumaat, Mohd Zamin and Chemrouk, M. and Ghasemi, A. and Hakim, S.J.S. and Najmeh, R. (2011) An experimental investigation of the stress-strain distribution in high strength concrete deep beams. In: 12th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC12, 2011, Hong Kong.
Alengaram, Ubagaram Johnson and Mahmud, Hilmi and Jumaat, Mohd Zamin (2010) Development of lightweight concrete using industrial waste material, palm kernel shell as lightweight aggregate and its properties. In: Chemical, Biological and Environmental Engineering (ICBEE), 2010 2nd International Conference on.
Narmashiri, K. and Jumaat, Mohd Zamin (2009) Numerical study on strengthening composite bridges. In: Proceedings of the Fifth International Structural Engineering and Construction Conference, 22-25 Sept 2009, Las Vegas, USA.
Alengaram, U.J. and Jumaat, Mohd Zamin and Mahmud, Hilmi (2009) Structural behaviour of reinforced palm kernel shell foamed concrete beams. In: Proceedings of the Fifth International Structural Engineering and Construction Conference, 22-25 Sept 2009, Las Vegas, USA.
Jumaat, Mohd Zamin and Alam, M.A. (2009) Performance of End Anchored Steel Plate and Cfrp Laminate Flexurally Strengthened R.C. Beams. In: International Engineering Convention, 11-14 May 2009, Damascus, Syria. (Submitted)
Jumaat, Mohd Zamin and Mahmud, Hilmi and Alengaram, Ubagaram Johnson (2009) Structural Behaviour Of Oil Palm Shell Concrete Beams. In: International Engineering Convention, 11-14 May 2009, Damascus, Syria. (Submitted)
Jumaat, Mohd Zamin and Razali, Fadini Mohamad and Rahim, Ahmad Hazim Abdul (2008) Development of limit state design method for Malaysian bolted timber joints. In: 10th World Conference on Timber Engineering 2008, Miyazaki.
Jumaat, Mohd Zamin and Tosee, V.R. (2008) An inestigation in mechanical properties and workability of lightweight concrete with various percentages of scoria instead of sand. In: 11th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC-11, Taipei.
Jumaat, Mohd Zamin and Rahim, Ahmad Hazim Abdul and Othman, Johari and Razali, Fadini Mohamad (2006) Timber engineering research and education in Malaysia. In: 9th World Conference on Timber Engineering 2006, WCTE 2006, 2006, Portland, OR.
Jumaat, Mohd Zamin and Bakar, Aishah Abu and Razali, Fadini Mohamad and Rahim, Ahmad Hazim Abdul and Othman, Johari (2006) The determination of the embedment strength of Malaysian hardwood. In: 9th World Conference on Timber Engineering 2006, WCTE 2006, 2006, Portland, OR.