Browse by Journal

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | D | E | F | H | J | K | M | N | O | R | S | Y | Z
Number of items: 41.

A

Abu Bakar, Nurfatimah and Ching, Yern Chee and Abdullah, Luqman Chuah and Ratnam, Chantara Thevy and Ibrahim, Nor Azowa (2015) Thermal and dynamic mechanical properties of grafted kenaf filled poly (vinyl chloride)/ethylene vinyl acetate composites. Materials & Design, 65. pp. 204-211. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2014.09.027.

Ahmadinia, Esmaeil and Zargar, Majid and Karim, Mohamed Rehan and Abdelaziz, Mahrez and Shafigh, Payam (2011) Using waste plastic bottles as additive for stone mastic asphalt. Materials & Design, 32 (10). pp. 4844-4849. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.06.016.

Akinwekomi, Akeem Damilola and Tang, Chak Yin and Tsui, Gary Chi Pong and Law, Wing Cheung and Chen, Ling and Yang, Xu Sheng and Abd Shukor, Mohd Hamdi (2018) Synthesis and characterisation of floatable magnesium alloy syntactic foams with hybridised cell morphology. Materials & Design, 160. pp. 591-600. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2018.10.004.

Alengaram, Ubagaram Johnson and Mahmud, Hilmi and Jumaat, Mohd Zamin (2011) Enhancement and prediction of modulus of elasticity of palm kernel shell concrete. Materials & Design, 32 (4). pp. 2143-2148. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2010.11.035.

Aminuddin, N.I. and Ahmad, Roslina and Ansari, H.M. and Mohd Zain, Norita and Akbar, S.A. and Pingguan-Murphy, Belinda (2016) Human fetal osteoblast cell response to self-assembled nanostructures on YSZ-(110) single crystal substrates. Materials & Design, 94. pp. 274-279. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2015.12.173.

B

Bang, L.T. and Ramesh, Singh and Purbolaksono, Judha and Ching, Yern Chee and Long, B.D. and Chandran, Hari and Ramesh, Subramaniam and Othman, R. (2015) Effects of silicate and carbonate substitution on the properties of hydroxyapatite prepared by aqueous co-precipitation method. Materials & Design, 87. pp. 788-796. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2015.08.069.

Bang, L.T. and Ramesh, Singh and Purbolaksono, Judha and Ching, Yern Chee and Long, B.D. and Chandran, Hari and Ramesh, Subramaniam and Othman, R. (2015) Effects of silicate and carbonate substitution on the properties of hydroxyapatite prepared by aqueous co-precipitation method. Materials & Design, 87. pp. 788-796. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2015.08.069.

D

Davoodi, M.M. and Sapuan, S.M. and Aidy, Ali and Abu Osman, Noor Azuan and Oshkour, Azim Ataollahi and Wan Abas, Wan Abu Bakar (2012) Development process of new bumper beam for passenger car: a review. Materials & Design, 40. pp. 304-313. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2012.03.060.

E

Ezazi, M.A. and Yusof, Farazila and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi and Fadzil, M. (2015) Employment of fiber laser technology to weld austenitic stainless steel 304 l with aluminum alloy 5083 using pre-placed activating flux. Materials & Design, 87. pp. 105-123. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2015.08.014.

F

Fayyadh, Moatasem M. and Razak, Hashim Abdul (2012) Assessment of adhesive setting time in reinforced concrete beams strengthened with carbon fibre reinforced polymer laminates. Materials & Design, 37. pp. 64-72. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.12.031.

H

Hassan, Mohamed Mohsen Abdel-Naeim and El-Sharief, Mahmoud A. and Aboul-Kasem, Ahmed and Ramesh, Singh and Purbolaksono, Judha (2012) A fuzzy model for evaluation and prediction of slurry erosion of 5127 steels. Materials & Design, 39. pp. 186-191. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2012.02.012.

Hassan, Mohamed Mohsen Abdel-Naeim and Naderi, Sadjad and Bushroa, Abdul Razak (2014) Low-velocity impact damage of woven fabric composites: Finite element simulation and experimental verification. Materials & Design, 53. pp. 706-718. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2013.07.068.

Hassan, Mohamed Mohsen Abdel-Naeim and Saleh, M.A.E. and Takakura, Norio and Ramesh, Singh and Purbolaksono, Judha (2012) Effect of bulge shape on wrinkling formation and strength of stainless steel thin sheet. Materials & Design, 42. pp. 37-45. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2012.05.035.

J

Jafarlou, D.M. and Zalnezhad, E. and Ezazi, M.A. and Mardi, N.A. and Hassan, Mohamed Mohsen Abdel-Naeim (2015) The application of equal channel angular pressing to join dissimilar metals, aluminium alloy and steel, using an Ag-Cu-Sn interlayer. Materials & Design, 87. pp. 553-566. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2015.08.062.

Jafarlou, D.M. and Zalnezhad, E. and Ezazi, M.A. and Mardi, N.A. and Hassan, Mohamed Mohsen Abdel-Naeim (2015) The application of equal channel angular pressing to join dissimilar metals, aluminium alloy and steel, using an Ag-Cu-Sn interlayer. Materials & Design, 87. pp. 553-566. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2015.08.062.

Jumaat, Mohd Zamin and Alengaram, Ubagaram Johnson and Mahmud, Hilmi (2009) Shear strength of oil palm shell foamed concrete beams. Materials & Design, 30 (6). pp. 2227-2236. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2008.09.024.

K

Kanadasan, Jegathish and Razak, Hashim Abdul (2014) Mix design for self-compacting palm oil clinker concrete based on particle packing. Materials & Design, 56. pp. 9-19. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2013.10.086.

Kanlayasiri, Kannachai and Ariga, Tadashi (2015) Physical properties of Sn58Bi-xNi lead-free solder and its interfacial reaction with copper substrate. Materials & Design, 86. pp. 371-378. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2015.07.108.

Khaleel, O.R. and Razak, Hashim Abdul (2014) Mix design method for self compacting metakaolin concrete with different properties of coarse aggregate. Materials & Design, 53. pp. 691-700. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2013.07.072.

M

Moghaddam, Taher Baghaee and Soltani, Mehrtash and Karim, Mohamed Rehan (2014) Evaluation of permanent deformation characteristics of unmodified and Polyethylene Terephthalate modified asphalt mixtures using dynamic creep test. Materials & Design, 53. pp. 317-324. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2013.07.015.

Moghaddam, Taher Baghaee and Soltani, Mehrtash and Karim, Mohamed Rehan (2015) Stiffness modulus of Polyethylene Terephthalate modified asphalt mixture: A statistical analysis of the laboratory testing results. Materials & Design, 68. pp. 88-96. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2014.11.044.

Moshwan, R. and Yusof, F. and Hassan, M.A. and Rahmat, S.M. (2015) Effect of tool rotational speed on force generation, microstructure and mechanical properties of friction stir welded Al-Mg-Cr-Mn (AA 5052-O) alloy. Materials & Design, 66 (Pt.A). pp. 118-128. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2014.10.043.

Moshwan, Raza and Yusof, Farazila and Hassan, Mohamed Mohsen Abdel-Naeim and Rahmat, Sahifulddin M. (2015) Effect of tool rotational speed on force generation, microstructure and mechanical properties of friction stir welded Al-Mg-Cr-Mn (AA 5052-O) alloy. Materials & Design, 66. pp. 118-128. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2014.10.043.

N

Naderi, Sadjad and Hassan, Mohamed Mohsen Abdel-Naeim and Bushroa, Abdul Razak (2015) Alternative methods to determine the elastoplastic properties of sintered hydroxyapatite from nanoindentation testing. Materials & Design, 67. pp. 360-368. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2014.11.030.

Naganathan, Sivakumar and Razak, Hashim Abdul and Hamid, Siti Nadzriah Abdul (2012) Properties of controlled low-strength material made using industrial waste incineration bottom ash and quarry dust. Materials & Design, 33 (1). pp. 56-63. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.07.014.

O

Oshkour, A.A. and Davoodi, M.M. and Abu Osman, Noor Azuan and Yau, Y.H. and Tarlochan, F. and Wan Abas, Wan Abu Bakar (2013) Finite element analysis of circumferential crack behavior in cement-femoral prosthesis interface. Materials & Design, 49. pp. 96-102. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2013.01.037.

R

Rakib, Muhammad Iftekharul and Choudhury, Imtiaz Ahmed and Hussain, Sajjad and Abu Osman, Noor Azuan (2015) Design and biomechanical performance analysis of a user-friendly orthotic device. Materials & Design, 65. pp. 716-725. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2014.09.075.

Ramesh, Singh and Tan, C.Y. and Tolouei, R. and Amiriyan, M. and Purbolaksono, J. and Sopyan, I. and Teng, W.D. (2012) Sintering behavior of hydroxyapatite prepared from different routes. Materials & Design, 34. pp. 148-154. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.08.011.

Razak, Hashim Abdul and Sajedi, Fathollah (2011) The effect of heat treatment on the compressive strength of cement-slag mortars. Materials & Design, 32 (8-9). pp. 4618-4628. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.04.038.

Razali, Shaifulazuar and Majid, Siti Rohana (2018) Electrochemical performance of binder-free NiO-PANI on etched carbon cloth as active electrode material for supercapacitor. Materials & Design, 153. pp. 24-35. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2018.04.074.

S

Said, S.H. and Razak, Hashim Abdul (2015) The effect of synthetic polyethylene fiber on the strain hardening behavior of engineered cementitious composite (ECC). Materials & Design, 86. pp. 447-457. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2015.07.125.

Sajedi, Fathollah and Razak, Hashim Abdul (2011) Effects of thermal and mechanical activation methods on compressive strength of ordinary Portland cement-slag mortar. Materials & Design, 32 (2). pp. 984-995. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2010.08.038.

Sajedi, Fathollah and Razak, Hashim Abdul (2010) Thermal activation of ordinary Portland cement-slag mortars. Materials & Design, 31 (9). pp. 4522-4527. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2010.04.011.

Sarraf, Masoud and Dabbagh, Ali and Bushroa, Abdul Razak and Nasiri-Tabrizi, Bahman and Hosseini, Hamid Reza Madaah and Saber-Samandari, Saeed and Abu Kasim, Noor Hayaty and Lum, Kah Yean and Sukiman, Nazatul Liana (2018) Silver oxide nanoparticles-decorated tantala nanotubes for enhanced antibacterial activity and osseointegration of Ti6Al4V. Materials & Design, 154. pp. 28-40. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2018.05.025.

Shafigh, Payam and Jumaat, Mohd Zamin and Mahmud, Hilmi and Alengaram, Ubagaram Johnson (2011) A new method of producing high strength oil palm shell lightweight concrete. Materials & Design, 32 (10). pp. 4839-4843. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.06.015.

Shafigh, Payam and Mahmud, Hilmi and Jumaat, Mohd Zamin (2011) Effect of steel fiber on the mechanical properties of oil palm shell lightweight concrete. Materials & Design, 32 (7). pp. 3926-3932. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.02.055.

Shafigh, Payam and Mahmud, Hilmi and Jumaat, Mohd Zamin (2012) Oil palm shell lightweight concrete as a ductile material. Materials & Design, 36. pp. 650-654. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.12.003.

Shahzamanian, M.M. and Sahari, B.B. and Bayat, Mehdi and Ismarrubie, Z.N. and Mustapha, F. (2010) Transient and thermal contact analysis for the elastic behavior of functionally graded brake disks due to mechanical and thermal loads. Materials & Design, 31 (10). pp. 4655-4665. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2010.05.032.

Y

Yap, Soon Poh and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Khaw, Kuan Ren (2015) Torsional behaviour of steel fibre-reinforced oil palm shell concrete beams. Materials & Design, 87. pp. 854-862. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2015.08.078.

Yusof, Farazila and Yukio, Miyashita and Yoshiharu, Mutoh and Abd Shukor, Mohd Hamdi (2012) Effect of anodizing on pulsed Nd: YAG laser joining of polyethylene terephthalate (PET) and aluminium alloy (A5052). Materials & Design, 37. pp. 410-415. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2012.01.006.

Z

Zeimaran, E. and Mohan, S. and Pourshahrestani, S. and Pingguan-Murphy, Belinda and Kadri, Nahrizul Adib and Murali, M.R. and Raghavendran, Hanumanth Rao Balaji and Hasikin, Khairunnisa and Kamarul, Tunku and Towler, M.R. (2016) Osteogenic differentiation of mesenchymal stem cells on a poly (octanediol citrate)/bioglass composite scaffold in vitro. Materials & Design, 109. pp. 434-442. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2016.07.096.

This list was generated on Mon Mar 4 10:44:33 2024 +08.