 | Up a level |
Ahmad, Waqas and Jabbar, Bushra and Ahmad, Imtiaz and Mohamed Jan, Badrul and Stylianakis, Minas M. and Kenanakis, George and Ikram, Rabia (2021) Highly sensitive humidity sensors based on polyethylene oxide/cuo/multi walled carbon nanotubes composite nanofibers. Materials, 14 (4). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14041037.
Ahmad, Waqas and Qaiser, Shanif and Ullah, Rahman and Mohamed Jan, Badrul and Karakassides, Michael A. and Salmas, Constantinos E. and Kenanakis, George and Ikram, Rabia (2021) Utilization of tires waste-derived magnetic-activated carbon for the removal of hexavalent chromium from wastewater. Materials, 14 (1). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14010034.
Al-Mansob, Ramez A. and Katman, Herda Yati and Al-Sabaeei, Abdulnaser M. and Zamzami, Muhammad and Al-Fakih, Amin and Wei, Willy Kuay and Jassam, Taha M. and Alsharef, Jamal and Surol, Salihah B. and Yusof, Nurul H. and Koting, Suhana (2022) Effect of carbon nanofibers on physical, adhesion and rheological properties of liquid epoxidized natural rubber modified asphalt. Materials, 15 (11). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15113870.
Ali, Abdelrahman and Salem, Ayman M. H. and Muthalif, Asan G. A. and Ramli, Rahizar and Julai, Sabariah (2022) Development of a performance-enhanced hybrid magnetorheological elastomer-fluid for semi-active vibration isolation: Static and dynamic experimental characterization. Materials, 15 (9). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15093238.
Ali, Salman and Tahir, Muhammad and Mehboob, Nasir and Wahab, Fazal and Langford, Steven J. and Said, Suhana Mohd and Sarker, Mahidur R. and Julai, Sabariah and Ali, Sawal Hamid Md (2020) Amino anthraquinone: Synthesis, characterization, and its application as an active material in environmental sensors. Materials, 13 (4). ISSN 1996-1944, DOI https://doi.org/10.3390/ma13040960.
Aljohani, Faizah S. and Elsafi, Mohamed and Ghoneim, Nourhan I. and Toderas, M. and Sayyed, M. I. and Mohafez, Hamidreza and Islam, Mohammad Aminul and Khandaker, Mayeen Uddin and El-Khatib, Mostafa (2021) Water treatment from MB using Zn-Ag MWCNT synthesized by double arc discharge. Materials, 14 (23). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14237205.
Alsubari, B. and Shafigh, P. and Jumaat, Mohd Zamin (2015) Development of self-consolidating high strength concrete incorporating treated palm oil fuel ash. Materials, 8 (5). pp. 2154-2173. ISSN 1996-1944, DOI https://doi.org/10.3390/ma8052154.
Ansari, Akhalakur Rahman and Ansari, Sajid Ali and Parveen, Nazish and Ansari, Mohammad Omaish and Osman, Zurina (2021) Silver nanoparticles embedded on reduced graphene oxide@copper oxide nanocomposite for high performance supercapacitor applications. Materials, 14 (17). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14175032.
Ashrafi, Negin and Ariff, Azmah Hanim Mohamed and Jung, Dong-Won and Sarraf, Masoud and Foroughi, Javad and Sulaiman, Shamsuddin and Hong, Tang Sai (2022) Magnetic, electrical, and physical properties evolution in fe3o4 nanofiller reinforced aluminium matrix composite produced by powder metallurgy method. Materials, 15 (12). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15124153.
Aziz, Shujahadeen B. and Nofal, Muaffaq M. and Kadir, M. F. Z. and Dannoun, Elham M. A. and Brza, Mohamad A. and Hadi, Jihad M. and Abdullah, Ranjdar M. (2021) Bio-based plasticized PVA based polymer blend electrolytes for energy storage EDLC devices: Ion transport parameters and electrochemical properties. Materials, 14 (8). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14081994.
Bie, Hongling and Chen, Honghao and Shan, Lijun and Tan, C. Y. and Al-Furjan, M. S. H. and Ramesh, S. and Gong, Youping and Liu, Y. F. and Zhou, R. G. and Yang, Weibo and Wang, Honghua (2023) 3D printing and performance study of porous artificial bone based on HA-ZrO2-PVA composites. Materials, 16 (3). ISSN 1996-1944, DOI https://doi.org/10.3390/ma16031107.
Binazadeh, Mojtaba and Rasouli, Jamal and Sabbaghi, Samad and Mousavi, Seyyed Mojtaba and Hashemi, Seyyed Alireza and Lai, Chin Wei (2023) An Overview of Photocatalytic Membrane Degradation Development. Materials, 16 (9). ISSN 1996-1944, DOI https://doi.org/10.3390/ma16093526.
Boudouh, Djahida and Ikram, Rabia and Mohamed Jan, Badrul and Simon Cornelis Metselaar, Hendrik and Hamana, Djamel and Kenanakis, George (2021) Synthesis, characterization and filtration properties of ecofriendly fe3o4 nanoparticles derived from olive leaves extract. Materials, 14 (15). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14154306.
Cahyanto, Arief and Liemidia, Michella and Karlina, Elin and Zakaria, Myrna Nurlatifah and Shariff, Khairul Anuar and Sukotjo, Cortino and El-Ghannam, Ahmed (2023) Bioactive carbonate apatite Cement with enhanced compressive strength via incorporation of silica calcium phosphate composites and calcium hydroxide. Materials, 16 (5). ISSN 1996-1944, DOI https://doi.org/10.3390/ma16052071.
Ch'ng, S.Y. and Andriyana, A. and Tee, Y.L. and Verron, E. (2015) Effects of carbon black and the presence of static mechanical strain on the swelling of elastomers in solvent. Materials, 8 (3). pp. 884-898. ISSN 1996-1944, DOI https://doi.org/10.3390/Ma8030884.
Channa, Iftikhar Ahmed and Chandio, Ali Dad and Rizwan, Muhammad and Shah, Aqeel Ahmed and Bhatti, Jahanzeb and Shah, Abdul Karim and Hussain, Fayaz and Shar, Muhammad Ali and AlHazaa, Abdulaziz (2021) Solution processed PVB/mica flake coatings for the encapsulation of organic solar cells. Materials, 14 (10). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14102496.
Cheah, Chia Wei and Al-Namnam, Nisreen Mohammed and Lau, May Nak and Lim, Ghee Seong and Raman, Renukanth and Fairbairn, Peter and Ngeow, Wei Cheong (2021) Synthetic material for bone, periodontal, and dental tissue regeneration: Where Are we now, and where are we heading next? Materials, 14 (20). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14206123.
Chen, Y.W. and Tan, T.H. and Lee, H.V. and Hamid, Sharifah Bee Abd (2017) Easy Fabrication of Highly Thermal-Stable Cellulose Nanocrystals Using Cr(NO3)3 Catalytic Hydrolysis System: A Feasibility Study from Macro- to Nano-Dimensions. Materials, 10 (1). p. 42. ISSN 1996-1944, DOI https://doi.org/10.3390/ma10010042.
Chia, P.Y. and Haseeb, A.S. Md. Abdul and Mannan, S.H. (2016) Reactions in Electrodeposited Cu/Sn and Cu/Ni/Sn Nanoscale Multilayers for Interconnects. Materials, 9 (6). p. 430. ISSN 1996-1944, DOI https://doi.org/10.3390/ma9060430.
Choo, Min-Yee and Oi, Lee Eng and Daou, T. Jean and Ling, Tau Chuan and Lin, Yu-Chuan and Centi, Gabriele and Ng, Eng-Poh and Juan, Joon Ching (2020) Deposition of NiO nanoparticles on nanosized zeolite NaY for production of biofuel via yydrogen-free deoxygenation. Materials, 13 (14). ISSN 19961944, DOI https://doi.org/10.3390/ma13143104.
Choukimath, Mantesh C. and Banapurmath, Nagaraj R. and Riaz, Fahid and Patil, Arun Y. and Jalawadi, Arun R. and Mujtaba, M. A. and Shahapurkar, Kiran and Khan, T. M. Yunus and Alsehli, Mishal and Soudagar, Manzoore Elahi M. and Fattah, I. M. R. (2022) Experimental and computational study of mechanical and thermal characteristics of h-BN and GNP infused polymer composites for elevated temperature applications. Materials, 15 (15). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15155397.
Dai, Li and Wu, Xu and Zhou, Meirong and Ahmad, Waqas and Ali, Mujahid and Sabri, Mohanad Muayad Sabri and Salmi, Abdelatif and Ewais, Dina Yehia Zakaria (2022) Using machine learning algorithms to estimate the compressive property of high strength fiber reinforced concrete. Materials, 15 (13). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15134450.
Farade, Rizwan A. and Wahab, Noor Izzri Abdul and Mansour, Diaa-Eldin A. and Azis, Norhafiz and Jasni, Jasronita and Soudagar, Manzoore Elahi M. and Siddappa, Vasudevamurthy (2020) Development of graphene oxide-based nonedible cottonseed nanofluids for power transformers. Materials, 13 (11). ISSN 19961944,
Hosen, Md. Akter and Althoey, Fadi and Jumaat, Mohd Zamin and Alengaram, U. Johnson and Sulong, N. H. Ramli (2021) Flexural performance of RC beams strengthened with externally-side bonded reinforcement (E-SBR) technique using CFRP composites. Materials, 14 (11). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14112809.
Hossain, M.I. and Faruque, M.R.I. and Islam, M.T. and Ullah, M.H. (2015) A new wide-band double-negative metamaterial for C- and S-band applications. Materials, 8 (1). pp. 57-71. ISSN 1996-1944, DOI https://doi.org/10.3390/ma8010057.
Ikram, Rabia and Jan, Badrul Mohamed and Sidek, Akhmal and Kenanakis, George (2021) Utilization of eco-friendly waste generated nanomaterials in water-based drilling fluids: State of the art review. Materials, 14 (15). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14154171.
Imaduddin, Ibnu Syafiq and Majid, Siti Rohana and Aziz, Shujahadeen B. and Brevik, Iver and Yusuf, Siti Nor Farhana and Brza, M. A. and Saeed, Salah R. and Kadir, Mohd Fakhrul Zamani Abdul (2021) Fabrication of co3o4 from cobalt/2,6-napthalenedicarboxylic acid metal-organic framework as electrode for supercapacitor application. Materials, 14 (3). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14030573.
Kallannavar, Vinayak and Kattimani, Subhaschandra and Soudagar, Manzoore Elahi M. and Mujtaba, M. A. and Alshahrani, Saad and Imran, Muhammad (2021) Neural network-based prediction model to investigate the influence of temperature and moisture on vibration characteristics of skew laminated composite sandwich plates. Materials, 14 (12). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14123170.
Kanadasan, J. and Razak, H.A. (2015) Utilization of Palm Oil Clinker as Cement Replacement Material. Materials, 8 (12). pp. 8817-8838. ISSN 1996-1944, DOI https://doi.org/10.3390/ma8125494.
Kee, S.Y. and Munusamy, Y. and Ong, K.S. and Metselaar, H.S.C. and Chee, S.Y. and Lai, K.C. (2017) Thermal Performance Study of Composite Phase Change Material with Polyacrylicand Conformal Coating. Materials, 10 (8). p. 873. ISSN 1996-1944, DOI https://doi.org/10.3390/ma10080873.
Khan, Muhammad Imran and Sutanto, Muslich Hartadi and Yusoff, Nur Izzi Md. and Zoorob, Salah E. and Rafiq, Waqas and Ali, Mujahid and Fediuk, Roman and Vatin, Nikolai Ivanovich (2022) Cementitious grouts for semi-flexible pavement surfaces-A review. Materials, 15 (15). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15155466.
Khan, Safdar and Yap, Soon Poh and Tan, Chee Ghuan and Ganasan, Reventheran and Sherif, Muhammad M. and El-Shafie, Ahmed (2021) Torsional crack localization in palm oil clinker concrete using acoustic emission method. Materials, 14 (18). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14185446.
Khanis, N.H. and Ritikos, R. and Kamal, S.A.A. and Rahman, S.A. (2017) Investigations on the Role of N2:(N2 + CH4) Ratio on the Growth of Hydrophobic Nanostructured Hydrogenated Carbon Nitride Thin Films by Plasma Enhanced Chemical Vapor Deposition at Low Temperature. Materials, 10 (2). p. 102. ISSN 1996-1944, DOI https://doi.org/10.3390/ma10020102.
Leong, Y.M. and Haseeb, A.S. Md. Abdul (2016) Soldering Characteristics and Mechanical Properties of Sn-1.0Ag-0.5Cu Solder with Minor Aluminum Addition. Materials, 9 (7). p. 522. ISSN 1996-1944, DOI https://doi.org/10.3390/ma9070522.
Msebawi, Muntadher Sabah and Leman, Zulkiflle and Shamsudin, Shazarel and Tahir, Suraya Mohd and Jaafar, Che Nor Aiza and Ariff, Azmah Hanim Mohamed and Zahari, Nur Ismarrubie and Abdellatif, Abdallah (2021) Production of aluminum aa6061 hybrid nanocomposite from waste metal using hot extrusion process: Strength performance and prediction by RSM and random forest. Materials, 14 (20). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14206102.
Mydin, Md Azree Othuman and Nawi, Mohd Nasrun Mohd and Mohamed, Othman and Sari, Marti Widya (2022) Mechanical properties of lightweight foamed concrete modified with magnetite (Fe3O4) nanoparticles. Materials, 15 (17). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15175911.
Nagaraja, Santhosh and Kodandappa, Ramesha and Ansari, Khalid and Kuruniyan, Mohamed Saheer and Afzal, Asif and Kaladgi, Abdul Razak and Aslfattahi, Navid and Saleel, C. Ahamed and Gowda, Ashwin C. and Bindiganavile Anand, Praveena (2021) Influence of heat treatment and reinforcements on tensile characteristics of aluminium AA 5083/silicon carbide/fly ash composites. Materials, 14 (18). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14185261.
Nazir, M.H. and Khan, Z.A. and Saeed, A. and Bakolas, V. and Braun, W. and Bajwa, R. and Rafique, S. (2017) Analyzing and Modelling the Corrosion Behavior of Ni/Al2O3, Ni/SiC, Ni/ZrO2 and Ni/Graphene Nanocomposite Coatings. Materials, 10 (11). p. 1225. ISSN 1996-1944, DOI https://doi.org/10.3390/ma10111225.
Nofal, Muaffaq M. and Hadi, Jihad M. and Aziz, Shujahadeen B. and Brza, Mohamad A. and Asnawi, Ahmad S. F. M. and Dannoun, Elham M. A. and Abdullah, Aziz M. and Kadir, Mohd F. Z. (2021) A study of methylcellulose-based polymer electrolyte impregnated with potassium ion-conducting carrier: Impedance, EEC modeling, FTIR, dielectric, and device characteristics. Materials, 14 (17). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14174859.
Parveez, Bisma and Jamal, Nur Ayuni and Aabid, Abdul and Baig, Muneer and Yusof, Farazila (2023) Experimental analysis and parametric optimization on compressive properties of diamond-reinforced porous Al composites. Materials, 16 (1). ISSN 1996-1944, DOI https://doi.org/10.3390/ma16010091.
Rashid, Bushra and Anwar, Ayaz and Shahabuddin, Syed and Mohan, Gokula and Saidur, Rahman and Aslfattahi, Navid and Sridewi, Nanthini (2021) A comparative study of cytotoxicity of ppg and peg surface-modified 2-d ti3c2 mxene flakes on human cancer cells and their photothermal response. Materials, 14 (16). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14164370.
Rusdi, Hashlina and Rusdi, Roshidah and Aziz, Shujahadeen B. and Alsubaie, Abdullah Saad and Mahmoud, Khaled H. and Abdul Kadir, Mohd Fakhrul Zamani (2021) The role of sintering temperature and dual metal substitutions (Al3+, Ti4+) in the development of NASICON-structured electrolyte. Materials, 14 (23). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14237342.
Sarir, Payam and Armaghani, Danial Jahed and Jiang, Huanjun and Sabri, Mohanad Muayad Sabri and He, Biao and Ulrikh, Dmitrii Vladimirovich (2022) Prediction of bearing capacity of the square concrete-filled steel tube columns: An application of metaheuristic-based neural network models. Materials, 15 (9). DOI https://doi.org/10.3390/ma15093309.
Sayed, Ahmed M. and Alanazi, Hani and Abadel, Aref A. and Alharbi, Yousef R. and Shamsudin, Mohd Fazaulnizam (2023) Experimental analysis of channel steel member under tension load with damage in the unconnected legs. Materials, 16 (2). ISSN 1996-1944, DOI https://doi.org/10.3390/ma16020527.
Shan, L. and Tan, Chou Yong and Shen, X. and Ramesh, S. and Kolahchi, R. and Hajmohammad, M. H. and Rajak, D. K. (2022) Creep behavior of A356 aluminum alloy reinforced with multi-walled carbon nanotubes by stir casting. Materials, 15 (24). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15248959.
Sharath, Ballupete Nagaraju and Venkatesh, Channarayapattana Venkataramaiah and Afzal, Asif and Aslfattahi, Navid and Aabid, Abdul and Baig, Muneer and Saleh, Bahaa (2021) Multi ceramic particles inclusion in the aluminium matrix and wear characterization through experimental and response surface-artificial neural networks. Materials, 14 (11). ISSN EISSN 1996-1944, DOI https://doi.org/10.3390/ma14112895.
Siburian, Rikson and Hutagalung, Fajar and Silitonga, Oktavian and Paiman, Suriati and Simatupang, Lisnawaty and Simanjuntak, Crystina and Aritonang, Sri Pratiwi and Alias, Yatimah and Jing, Lin and Goei, Ronn and Tok, Alfred Iing Yoong (2023) The new materials for battery electrode prototypes. Materials, 16 (2). ISSN 1996-1944, DOI https://doi.org/10.3390/ma16020555.
Sim, L.C. and Tan, W.H. and Leong, K.H. and Bashir, M.J.K. and Saravanan, P. and Surib, N.A. (2017) Mechanistic Characteristics of Surface Modified Organic Semiconductor g-C3N4 Nanotubes Alloyed with Titania. Materials, 10 (1). p. 28. ISSN 1996-1944, DOI https://doi.org/10.3390/ma10010028.
Singh, Jasbir and Ching, Yern Chee and Liu, De and Ching, Kuan and Razali, Shaifulazuar and Gan, Seng Neon (2018) Effects of PTFE Micro-Particles on the Fiber-Matrix Interface of Polyoxymethylene/Glass Fiber/Polytetrafluoroethylene Composites. Materials, 11 (11). p. 2164. ISSN 1996-1944, DOI https://doi.org/10.3390/ma11112164.
Skhirtladze, Levani and Bezvikonnyi, Oleksandr and Keruckiene, Rasa and Dvylys, Lukas and Mahmoudi, Malek and Labanauskas, Linas and Ariffin, Azhar and Grazulevicius, Juozas V. V. (2023) Derivatives of Pyridazine with Phenoxazine and 9,9-Dimethyl-9,10-dihydroacridine Donor Moieties Exhibiting Thermally Activated Delayed Fluorescence. Materials, 16 (3). ISSN 1996-1944, DOI https://doi.org/10.3390/ma16031294.
Suhaimy, Syazwan Hanani Meriam and Lai, Chin Wei and Tajuddin, Hairul Anuar and Samsudin, Emy Marlina and Johan, Mohd Rafie (2018) Impact of TiO2 Nanotubes’ Morphology on the Photocatalytic Degradation of Simazine Pollutant. Materials, 11 (11). p. 2066. ISSN 1996-1944, DOI https://doi.org/10.3390/ma11112066.
Ullah, Rahman and Ahmad, Waqas and Yaseen, Muhammad and Khan, Mansoor and Khattak, Mehmood Iqbal and Jan, Badrul Mohamed and Ikram, Rabia and Kenanakis, George (2021) Fabrication of MNPs/rGO/PMMA composite for the removal of hazardous Cr(VI) from tannery wastewater through batch and continuous mode adsorption. Materials, 14 (22). DOI https://doi.org/10.3390/ma14226923.
Umarfarooq, M. A. and Gouda, P. S. Shivakumar and Banapurmath, N. R. and Kittur, Mohammed Ibrahim and Khan, Tabrej and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Hussien, Mohamed (2022) On the residual stresses and fracture toughness of glass/carbon epoxy composites. Materials, 15 (20). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15207135.
Wong, C.P.P. and Lai, Chin Wei and Lee, K.M. and Hamid, Sharifah Bee Abd (2015) Advanced Chemical Reduction of Reduced Graphene Oxide and Its Photocatalytic Activity in Degrading Reactive Black 5. Materials, 8 (10). pp. 7118-7128. ISSN 1996-1944, DOI https://doi.org/10.3390/ma8105363.
Yazid, Muhd Hafizuddin and Faris, Meor Ahmad and Abdullah, Mohd Mustafa Al Bakri and Ibrahim, Muhammad Shazril Idris and Razak, Rafiza Abdul and Nergis, Dumitru Doru Burduhos and Nergis, Diana Petronela Burduhos and Benjeddou, Omrane and Nguyen, Khanh-Son (2022) Mechanical properties of fly ash-based geopolymer concrete incorporation nylon66 fiber. Materials, 15 (24). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15249050.
Zahid, Rehan and Bhutta, Muhammad Usman and Mufti, Riaz Ahmad and Abdullah, Muhammad Usman and Masjuki, Haji Hassan and Varman, Mahendra and Kalam, Muhammad Abul and Ali, Mian Ashfaq and Aslam, Jawad and Akhtar, Khalid (2021) Friction and Wear Performance Evaluation of Bio-Lubricants and DLC Coatings on Cam/Tappet Interface of Internal Combustion Engines. Materials, 14 (23). ISSN EISSN 1996-1944, DOI https://doi.org/10.3390/ma14237206.
Zhang, Qiaozhen and Chen, Mingzhu and Liu, Huiling and Zhao, Xiangyong and Qin, Xiaomei and Wang, Feifei and Tang, Yanxue and Yeoh, Keat Hoe and Chew, Khian-Hooi and Sun, Xiaojuan (2021) Deposition, characterization, and modeling of scandium-doped aluminum nitride thin film for piezoelectric devices. Materials, 14 (21). ISSN EISSN 1996-1944, DOI https://doi.org/10.3390/ma14216437.
