Browse by Journal

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: B | H | J | M | R | S | W | Y
Number of items: 25.

B

Billah, M.M. and Rahman, M.M. and Saidur, Rahman and Hasanuzzaman, M. (2011) Simulation of mhd mixed convection heat transfer enhancement in a double lid-driven obstructed enclosure. International Journal of Mechanical and Materials Engineering, 6 (1). pp. 18-30. ISSN 1823-0334,

Bushroa, Abdul Razak and Masjuki, Haji Hassan and Muhamad, M.R. (2011) Parameter optimization of sputtered Ti interlayer using Taguchi method. International Journal of Mechanical and Materials Engineering, 6 (2). pp. 140-146. ISSN 1823-0334,

H

Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, Rahman (2010) Adhesion and wear behavior of nanostructured titanium oxide thin films. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 5-10. ISSN 1823-0334,

Hasanuzzaman, M. and Saidur, Rahman and Ali, M. and Masjuki, Haji Hassan (2007) Effects of variables on natural convective heat transfer through V-corrugated vertical plates. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 109-117. ISSN 18230334,

Hasanuzzaman, M. and Saidur, Rahman and Masjuki, Haji Hassan (2008) Moisture transfer and energy losses of household refrigeratorfreezer during the closed door operation. International Journal of Mechanical and Materials Engineering, 3 (1). 30-37..

J

Jahirul, M.I. and Saidur, Rahman and Hasanuzzaman, M. and Masjuki, Haji Hassan and Kalam, M.A. (2007) A comparison of the air pollution of gasoline and CNG driven car for Malaysia. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 130-138. ISSN 18230334 ,

Jahirul, M.I. and Saidur, Rahman and Masjuki, Haji Hassan (2009) Application of artificial neural network to predict brake specific fuel consumption of retrofitted cng engine. International Journal of Mechanical and Materials Engineering, 4 (3). pp. 249-255. ISSN 1823-0334,

Jahirul, M.I. and Saidur, Rahman and Masjuki, Haji Hassan (2010) Predictability of artificial neural network (ANN) in performance prediction of a retrofitted CNG engine. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 268-275. ISSN 1823-0334,

Jahirul, M.I. and Saidur, Rahman and Masjuki, Haji Hassan and Ahmed, S. and Kalam, M.A. (2007) Environmental effects of conversion of petroleum fuel-based motor cars to natural gas vehicles (NGVs). International Journal of Mechanical and Materials Engineering. pp. 35-43.

M

Mahbubul, I.M. and Saidur, Rahman and Amalina, M.A. (2012) Investigation of viscosity of R123-TIO 2 nanorefrigerant. International Journal of Mechanical and Materials Engineering, 7 (2). pp. 146-151. ISSN 18230334,

Mamun, M.A.H. and Tanim, T.R. and Rahman, M.M. and Saidur, Rahman and Nagata, S. (2010) Mixed convection analysis in trapezoidal cavity with a moving lid. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 18-28. ISSN 1823-0334,

R

Rahman, M.M. and Billah, M.M. and Mamun, M.A.H. and Saidur, Rahman and Hasanuzzaman, M. (2010) Reynolds and prandtl numbers effects on mhd mixed convection in a lid-driven cavity along with joule heating and a centered heat conducting circular block. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 163-170. ISSN 1823-0334 ,

Rahman, M.M. and Mamun, M.A.H. and Saidur, Rahman and Nagata, S. (2009) Effect of a heat conducting horizontal circular cylinder on MHD mixed convection in a lid-driven cavity along with joule heating. International Journal of Mechanical and Materials Engineering, 4 (3). pp. 256-265. ISSN 18230334,

Rashid, M.M. and Hussain, Mohd Azlan and Rahim, N. Abd and Momoh, J.S. (2007) Development of a semi-active car suspension control system using magneto-rheological damper model. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 93-108. ISSN 18230334,

Rashid, M.M. and Hussain, Mohd Azlan and Rahim, N.A. and Momoh, J.S. (2009) Development of fuzzy logic controller for magnetorheological rotary brake system. International Journal of Mechanical and Materials Engineering, 4 (3). pp. 232-238. ISSN 18230334 , DOI https://doi.org/10.1109/08IAS.2008.166.

S

Saidur, Rahman and Abdelaziz, E.A. and Hasanuzzaman, M. and Mamun, M.A.H. (2010) A study of energy efficiency, economic and environmental benefits of a cooling tower. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 87-94. ISSN 18230334,

Saidur, Rahman and Hasanuzzaman, M. and Sattar, M.A. and Masjuki, Haji Hassan and Badruddin, I.A. and Mohiuddin, A.K.M. (2007) An analysis of energy use, energy intensity and emissions at the industrial sector of Malaysia. International Journal of Mechanical and Materials Engineering, 2 (1). pp. 84-92. ISSN 1823-0334,

Saidur, Rahman and Masjuki, Haji Hassan (2008) Energy and associated emission analysis in office buildings. International Journal of Mechanical and Materials Engineering, 3 (1). pp. 90-96. ISSN 1823-0334, DOI https://doi.org/10.1016/j.apenergy.2007.11.002.

Saidur, Rahman and Masjuki, Haji Hassan and Hasanuzzaman, M. (2009) Perfromance of an improved solar car ventilator. International Journal of Mechanical and Materials Engineering, 4 (1). pp. 24-34. ISSN 1823-0334,

Saidur, Rahman and Masjuki, Haji Hassan and Hasanuzzaman, M. and Mahlia, T.M.I. and Tan, C.Y. and Ooi, J.K. and Yoon, P.H. (2008) Performance investigation of a solar powered thermoelectric refrigerator. International Journal of Mechanical and Materials Engineering, 3 (1). pp. 7-16. ISSN 1823-0334,

Sattar, M.A. and Saidur, Rahman and Masjuki, Haji Hassan (2007) Butane, isobutane and their mixtures as an alterantives to R-134a in domestic refrigerator. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 154-160. ISSN 18230334 ,

W

Whaad, A.M. and Adam, N.M. and Sapuan, S.M. and Saidur, Rahman (2010) Effect of selected shading devices on office room temperature. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 236-243. ISSN 18230334,

Y

Yau, Y.H. (2008) A preliminary thermal comfort study in tropical buildings Located in Malaysia. International Journal of Mechanical and Materials Engineering, 3 (2). pp. 119-126. ISSN 1823-0334,

Yau, Y.H. and Foo, Y.W. and Mohyi, M.H.H. (2008) A preliminary study on HVAC systems and thermal comfort in a Tropical university building in Malaysia. International Journal of Mechanical and Materials Engineering, 3 (2). pp. 160-175. ISSN 1823-0334, DOI 10368.

Yau, Yat Huang and Ahmadzadehtalatapeh, M. (2010) Experimental investigation of the thermal performance of an air-to-air horizontal heat pipe heat exchanger. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 29-35. ISSN 1823-0334,

This list was generated on Sat Mar 2 11:53:27 2024 +08.