 | Up a level |
Abbas, M. K. G. and Kuldip Singh, Ramesh Singh. and Lee, K. Y. Sara and Wong, Y. H. and Tan, Chou Yong and Alengaram, Ubagaram Johnson and Ganesan, P. and Musharavati, Farayi and Zalnezhad, Erfan (2022) Densification of copper oxide doped alumina toughened zirconia by conventional sintering. Ceramics International, 48 (5). pp. 6287-6293. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2021.11.171.
Abdul Rahman, Fariza and Basirun, Wan Jefrey and Johan, Mohd Rafie and Ghazali, Nadiah and Ladan, Magaji (2022) Corrosion protection of mild steel by polyaniline/tin-doped titania nanocomposite. Journal of Nano Research, 75. 81 -97. ISSN 16625250, DOI https://doi.org/10.4028/p-0c9315.
Abdulghafor, Rawad and Abdelmohsen, Abdelrahman and Turaev, Sherzod and Ali, Mohammed A. H. and Wani, Sharyar (2022) An analysis of body language of patients using artificial intelligence. Healthcare, 10 (12). ISSN 2227-9032, DOI https://doi.org/10.3390/healthcare10122504.
Abdulghafor, Rawad and Turaev, Sherzod and Ali, Mohammed A. H. (2022) Body language analysis in healthcare: An overview. Healthcare, 10 (7). ISSN 2227-9032, DOI https://doi.org/10.3390/healthcare10071251.
Adeleke, Sakiru Adekunle (2022) The effects of different bioceramics-incorporated oxide films on titanium implant by plasma electrolytic oxidation. JOURNAL OF MATERIALS RESEARCH, 37 (23). pp. 4348-4359. ISSN 2044-5326, DOI https://doi.org/10.1557/s43578-022-00804-x.
Afzal, Asif and Islam, Md Tariqul and Kaladgi, Abdul Razak and Manokar, A. Muthu and Samuel, Olusegun D. and Mujtaba, M. A. and Soudagar, Manzoore Elahi M. and Fayaz, H. and Ali, Hafiz Muhammad (2022) Experimental investigation on the thermal performance of inserted helical tube three-fluid heat exchanger using graphene/water nanofluid. Journal of Thermal Analysis and Calorimetry, 147 (8). pp. 5087-5100. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-021-10869-1.
Ahmad, Farah B. and Kalam, M.A. and Zhang, Zhanying and Masjuki, H.H. (2022) Sustainable production of furan-based oxygenated fuel additives from pentose-rich biomass residues. Energy Conversion and Management: X, 14. ISSN 2590-1745, DOI https://doi.org/10.1016/j.ecmx.2022.100222.
Ahmad, Muhammad Shakeel and Shahid, M. M. and Shahabuddin, Syed and Munawar, Khadija and Abd Rahim, Nasrudin and Ahmed, Waqar (2022) Effect of concentration of MoS2 on the TCO-Pt free polyaniline nano-rod based counter electrode for dye sensitised solar cell application. Materials Technology, 37 (10). pp. 1366-1374. ISSN 1066-7857, DOI https://doi.org/10.1080/10667857.2021.1949526.
Ahmad, Siti Nursyahirah and Manurung, Yupiter H. P. and Adenan, Mohd Shahriman and Yusof, Farazila and Mat, Muhd Faiz and Prajadhiana, Keval P. and Minggu, Zaidi and Leitner, Martin and Saidin, Salina (2022) Experimental validation of numerical simulation on deformation behaviour induced by wire arc additive manufacturing with feedstock SS316L on substrate S235. The International Journal of Advanced Manufacturing Technology, 119 (3-4). pp. 1951-1964. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-021-08340-4.
Ahmad, Siti Nursyahirah and Yahaya, Nor Afifah and Bahsan, Rosnadiah and Rozali, Shaifulazuar (2022) A study on the effect of gold nanoparticles for dye sensitized solar cell using Hibiscus Rosa-Sinensis as photosensitizer. International Journal of Integrated Engineering, 14 (5). 238 – 244. ISSN 2229-838X, DOI https://doi.org/10.30880/ijie.2022.14.05.027.
Ahmed, Ibrahim Abdulrab and Senan, Ebrahim Mohammed and Rassem, Taha H. and Hashem Ali, Mohammed Abdo and Shatnawi, Hamzeh Salameh Ahmad and Alwazer, Salwa Mutahar and Alshahrani, Mohammed (2022) Eye tracking-based diagnosis and early detection of autism spectrum disorder using machine learning and deep learning techniques. Electronics, 11 (4). ISSN 2079-9292, DOI https://doi.org/10.3390/electronics11040530.
Ahmed, Waqar and Amin, Muhammad and Ahmed, Khaleeq and Mehmood, Shahid and Fayaz, H. and Mujtaba, M. A. and Soudagar, Manzoore Elahi M. and Gul, Mustabshirha (2022) Characteristics investigation of silicone rubber-based RTV/mu ATH@nSiO(2) micro/nano composites for outdoor high voltage insulation. Journal of Dispersion Science and Technology, 43 (9). pp. 1346-1358. ISSN 0193-2691, DOI https://doi.org/10.1080/01932691.2020.1857262.
Ahmed, Waqar and Sidik, Nor Azwadi Che and Mehmood, Shahid and Alam, Mir Waqas and Fayaz, H. and Hussain, Muhammad Iqbal and Alawi, Omer A. and Ahmed, Syed Muzamil and Shah, Syed Nadeem Abbas and Kazi, S. N. (2022) Effects of thermophysical, hydrodynamics and thermal characteristics of well stable metallic nanofluids on energy transportation. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 147 (23). pp. 13879-13900. ISSN 1588-2926, DOI https://doi.org/10.1007/s10973-022-11696-8.
Akram, Naveed and Hosseini, Maryam and Sadri, Rad and Kazi, Salim Newaz and Kasaeian, Alibakhsh and Yarmand, Hooman and Hooman, Kamel and Ahmad, Roslina (2022) A facile, green fabrication of aqueous nanofluids containing hydrophilic functionalized carbon nanotubes toward improving heat transfer in a closed horizontal flow passage. Powder Technology, 404. ISSN 0032-5910, DOI https://doi.org/10.1016/j.powtec.2022.117451.
Al-Dahiree, Omar Sabah and Raja Ghazilla, Raja Ariffin and Tokhi, Mohammad Osman and Yap, Hwa Jen and Albaadani, Emad Abdullah (2022) Design of a compact energy storage with rotary series elastic actuator for lumbar support exoskeleton. Machines, 10 (7). ISSN 2075-1702, DOI https://doi.org/10.3390/machines10070584.
Al-Dahiree, Omar Sabah and Tokhi, Mohammad Osman and Hadi, Nabil Hassan and Hmoad, Nassar Rasheid and Ghazilla, Raja Ariffin Raja and Yap, Hwa Jen and Albaadani, Emad Abdullah (2022) Design and shape optimization of strain gauge load cell for axial force measurement for test benches. Sensors, 22 (19). ISSN 1424-8220, DOI https://doi.org/10.3390/s22197508.
Al-Furjan, M. S. H. and Shan, L. and Shen, X. and Kolahchi, R. and Rajak, Dipen Kumar (2022) Combination of FEM-DQM for nonlinear mechanics of porous GPL-reinforced sandwich nanoplates based on various theories. Thin-Walled Structures, 178. ISSN 0263-8231, DOI https://doi.org/10.1016/j.tws.2022.109495.
Al-Hartomy, Omar A. and Mujtaba, M. A. and Al-Ghamdi, Ahmed and Iqbal, Javed and Wageh, S. (2022) Combined effect of Phoenix dactylifera biodiesel and multiwalled carbon nanotube-titanium dioxide nanoparticles for modified diesel engines. International Journal of Environmental Science and Technology, 19 (1). pp. 515-540. ISSN 1735-1472, DOI https://doi.org/10.1007/s13762-021-03152-1.
Al-Ta'ii, Hassan M. Jaber and Ijam, Ali (2022) Investigating the impact of alpha particles energy level on the DNA-Schottky diode behavior. Physica B-Condensed Matter, 640. ISSN 0921-4526, DOI https://doi.org/10.1016/j.physb.2022.414004.
Alawi, Omer A. and Kamar, Haslinda Mohamed and Abdelrazek, Ali H. and Mallah, A. R. and Mohammed, Hussein A. and Abdulla, Aziz Ibrahim and Gatea, Hamed Alwan and Khiadani, Mehdi and Kazi, Salim Newaz and Yaseen, Zaher Mundher (2022) Hydrothermal and energy analysis of flat plate solar collector using copper oxide nanomaterials with different morphologies: Economic performance. Sustainable Energy Technologies and Assessments, 49. ISSN 2213-1388, DOI https://doi.org/10.1016/j.seta.2021.101772.
Alawi, Omer A. and Kamar, Haslinda Mohamed and Hussein, Omar A. and Mallah, A. R. and Mohammed, Hussein A. and Khiadani, Mehdi and Roomi, Ali B. and Kazi Md., Salim Newaz and Yaseen, Zaher Mundher (2022) Effects of binary hybrid nanofluid on heat transfer and fluid flow in a triangular-corrugated channel: An experimental and numerical study. Powder Technology, 395. pp. 267-279. ISSN 0032-5910, DOI https://doi.org/10.1016/j.powtec.2021.09.046.
Aldaghri, O. and Salih, E. Y. and Ramizy, A. and Mohd Sabri, Mohd Faizul and Madkhali, N. and Alinad, T. and Ibnaouf, K. H. and Eisa, M. H. (2022) Morphological characteristics of beta-irradiated lead oxide nano-sized particles. Digest Journal of Nanomaterials and Biostructures, 17 (1). pp. 29-37. ISSN 1842-3582,
Ali, Abdelrahman and Salem, Ayman M. H. and Muthalif, Asan G. A. and Ramli, Rahizar and Julai, Sabariah (2022) Development of a performance-enhanced hybrid magnetorheological elastomer-fluid for semi-active vibration isolation: Static and dynamic experimental characterization. Materials, 15 (9). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15093238.
Ali, Mohammed A. H. and Mekhilef, Saad and Yusoff, Nukman and Abd Razak, Bushroa (2022) Laser simulator logic: A novel inference system for highly overlapping of linguistic variable in membership functions. JOURNAL OF KING SAUD UNIVERSITY-COMPUTER AND INFORMATION SCIENCES, 34 (10, A). pp. 8019-8040. ISSN 2213-1248, DOI https://doi.org/10.1016/j.jksuci.2022.07.017.
Ambarwati, Neneng Siti Silfi and Elya, Berna and Malik, Amarila and Hanafi, Muhammad and Awang, Muhamad Sharul Nizam (2022) Isolation, identification, and antibacterial of amentoflavone from garcinia latissima miq. Leaves. International Journal of Applied Pharmaceutics, 14 (Specia). 67 -73. ISSN 0975-7058, DOI https://doi.org/10.22159/ijap.2022.v14s3.13.
Aqilah, Nur and Faizal, W.M. and Khor, C.Y. and Nik Ghazali, Nik Nazri and Zainon, Mohd Zamri and Ismail, Muhammad Aiman (2022) Computational fluid dynamic study of the pharyngeal airway characteristics before and after mandibular setback surgery in patients with mandibular prognathism. CFD Letters, 14 (3). 68 -78. ISSN 2180-1363, DOI https://doi.org/10.37934/cfdl.14.3.6878.
Arif, Muhammad Naveed and Waqas, Adeel and Butt, Faaz Ahmed and Mahmood, Mariam and Khoja, Asif Hussain and Ali, Majid and Ullah, Kafait and Mujtaba, M. A. and Kalam, M. A. (2022) Techno-economic assessment of solar water heating systems for sustainable tourism in northern Pakistan. Alexandria Engineering Journal, 61 (7). pp. 5485-5499. ISSN 1110-0168, DOI https://doi.org/10.1016/j.aej.2021.11.006.
Aslfattahi, Navid and Saidur, R. and Arifutzzaman, A. and Abdelrazik, A. S. and Samylingam, L. and Sabri, Mohd Faizul Mohd and Sidik, Nor Azwadi Che (2022) Improved thermo-physical properties and energy efficiency of hybrid PCM/graphene-silver nanocomposite in a hybrid CPV/thermal solar system. Journal of Thermal Analysis and Calorimetry, 147 (2). pp. 1125-1142. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-020-10390-x.
Athani, Abdulgaphur and Ghazali, Nik Nazri Nik and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Anqi, Ali E. and Algahtani, Ali (2022) Investigation of two-way fluid-structure interaction of blood flow in a patient-specific left coronary artery. Bio-Medical Materials and Engineering, 33 (1). pp. 13-30. ISSN 0959-2989, DOI https://doi.org/10.3233/BME-201171.
Awang, Muhamad S. N. and Mohd Zulkifli, Nurin Wahidah and Abbas, Muhammad M. and Zulkifli, Syahir A. and Yusoff, Mohd N. A. M. and Ahmad, Muhammad H. and Lokman NolHakim, Muhammad A. H. and Wan Daud, Wan Mohd Ashri (2022) Effect of addition of plastic pyrolytic oil and waste cooking oil biodiesel in palm oil biodiesel-commercial diesel blends on diesel engine performance, emission, and lubricity. Energy & Environment, 33 (6). pp. 1061-1089. ISSN 0958-305X, DOI https://doi.org/10.1177/0958305X211034822.
Awang, Muhamad Sharul Nizam and Zulkifli, Nurin Wahidah Mohd and Abbas, Muhammad Mujtaba and Zulkifli, Syahir Amzar and Abul Kalam, Md and Yusoff, Mohd Nur Ashraf Mohd and Daud, Wan Mohd Ashri Wan and Ahmad, Muhammad Hazwan (2022) Effect of diesel-palm biodiesel fuel with plastic pyrolysis oil and waste cooking biodiesel on tribological characteristics of lubricating oil. Alexandria Engineering Journal, 61 (9). pp. 7221-7231. ISSN 1110-0168, DOI https://doi.org/10.1016/j.aej.2021.12.0621110-0168.
Bang, L.T. and Ramesh, S. and Long, Bui Duc and Son, Nguyen Anh and Trung, Tran Bao and Sivakumar, S. (2022) Effect of temperature on the characteristics of beta-tricalcium phosphate for use as bone substitute material. Journal of Engineering Science and Technology, 17 (2). pp. 1577-1588. ISSN 1823-4690,
Barrinaya, Muhammad Akbar and Alfiyuranda, Muhammad Nayomi and Ramezani, Mohammadkasem and Putra, Ichsan Setya and Ramesh, Singh and Kadarno, Purwo and Hastuty, Sri and Purbolaksono, Judha (2022) Modes I-II-III stress intensity factors of a semi-elliptical surface crack at a round bar under torsion loading by FEM and DBEM. Engineering Solid Mechanics, 10 (4). 399 – 406. ISSN 22918744, DOI https://doi.org/10.5267/j.esm.2022.6.099.
Basha, J. Sadhik and Al Balushi, Montaha and Soudagar, Manzoore Elahi M. and Safaei, Mohammad Reza and Mujtaba, M. A. and Khan, T. M. Yunus and Hossain, Nazia and Elfasakhany, Ashraf (2022) Applications of nano-additives in internal combustion engines: A critical review. Journal of Thermal Analysis and Calorimetry, 147 (17). pp. 9383-9403. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-022-11199-6.
Bashir, M. Nasir and Haseeb, A. S. M. A. (2022) Grain size stability of interfacial intermetallic compound in Ni and Co nanoparticle-doped SAC305 solder joints under electromigration. Journal of Materials Science: Materials in Electronics, 33 (17). pp. 14240-14248. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-022-08352-0.
Bashir, Mohamed Bashir Ali and Salih, Ethar Yahya and Rajpar, Altaf Hussain and Bahmanrokh, Ghazaleh and Mohd Sabri, Mohd Faizul (2022) The impact of laser energy on the photoresponsive characteristics of CdO/Si visible light photodetector. Journal of Micromechanics and Microengineering, 32 (8). ISSN 0960-1317, DOI https://doi.org/10.1088/1361-6439/ac7d93.
Bashir, Muhammad Nasir and Butt, Sajid Ullah and Mansoor, Muhammad Adil and Khan, Niaz Bahadur and Bashir, Shahid and Wong, Yew Hoong and Alamro, Turki and Eldin, Sayed Mohamed and Jameel, Mohammed (2022) Role of crystallographic orientation of β-sn grain on electromigration failures in lead-free solder joint: An overview. Coatings, 12 (11). ISSN 2079-6412, DOI https://doi.org/10.3390/coatings12111752.
bin Ariffin, Mohammad Ashraf and bin Muhamad, Mohd Ridha and Raja, Sufian and Jamaludin, Mohd Fadzil and Yusof, Farazila and Suga, Tetsuo and Liu, Huihong and Morisada, Yoshiaki and Fujii, Hidetoshi (2022) Friction stir alloying of AZ61 and mild steel with Cu-CNT additive. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 21. pp. 2400-2415. ISSN 2214-0697, DOI https://doi.org/10.1016/j.jmrt.2022.10.082.
Cao, Yijuan and Pan, Song and Liu, Yiqiao and Yu, Haowei and Wang, Xinru and Chang, Li and Ni, Minrui and Liu, Hongwei (2022) The window opening behavior of infant families: A case study during transition season in the cold region of China. Energy and Buildings, 254. ISSN 0378-7788, DOI https://doi.org/10.1016/j.enbuild.2021.111588.
Choukimath, Mantesh C. and Banapurmath, Nagaraj R. and Riaz, Fahid and Patil, Arun Y. and Jalawadi, Arun R. and Mujtaba, M. A. and Shahapurkar, Kiran and Khan, T. M. Yunus and Alsehli, Mishal and Soudagar, Manzoore Elahi M. and Fattah, I. M. R. (2022) Experimental and computational study of mechanical and thermal characteristics of h-BN and GNP infused polymer composites for elevated temperature applications. Materials, 15 (15). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15155397.
Ding, Huizhe and Raja Ghazilla, Raja Ariffin and Kuldip Singh, Ramesh Singh and Wei, Lina (2022) Vehicle driving risk prediction model by reverse artificial intelligence neural network. Computational Intelligence and Neuroscience, 2022. ISSN 1687-5265, DOI https://doi.org/10.1155/2022/3100509.
Dwivedi, Kavya Arun and Kumar, Vicky and Wang, Chin-Tsan and Chong, Wen Tong and Ong, Hwai Chyuan (2022) Design and feasibility study of novel swirler incorporated microbial fuel cell for enhancing power generation and domestic wastewater treatment. Journal of Cleaner Production, 337. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2022.130382.
Eid, Mohamed Moustafa Abdelhalim Ahmed and Zubir, Mohd Nashrul Mohd and Muhamad, Mohd Ridha Bin and Newaz, Kazi Md. Salim and Ahmadi, Goodarz and Rony, Md. Mehedy Hasan and Ibrahim, Farah Arina and Alam, Md Shadab and Abdullah, Shekh (2022) Passive heat transfer augmentation in conduits by surface modification: A review. Journal of Thermal Analysis and Calorimetry, 147 (24). pp. 14601-14620. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-022-11642-8.
Equbal, Azhar and Equbal, Md Asif and Equbal, Md Israr and Ravindrannair, Pranav and Khan, Zahid A. and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Tirth, Vineet and Javed, Syed and Kittur, M. (2022) Evaluating CNC milling performance for machining AISI 316 stainless steel with carbide cutting tool insert. MATERIAL, 15 (22). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15228051.
Fayaz, H. and Afzal, Asif and Samee, A. D. Mohammed and Soudagar, Manzoore Elahi M. and Akram, Naveed and Mujtaba, M. A. and Jilte, R. D. and Islam, Md. Tariqul and Agbulut, Umit and Saleel, C. Ahamed (2022) Optimization of thermal and structural design in lithium-ion batteries to obtain energy efficient battery Thermal Management System (BTMS): A critical review. Archives Of Computational Methods In Engineering, 29 (1). pp. 129-194. ISSN 1134-3060, DOI https://doi.org/10.1007/s11831-021-09571-0.
Ganesan, Poo Balan and Noor, Fathiah and Varman, Mahendra (2022) An experimental study of heat exchanger based on metal foam, fin, and thermal interface material (TIM). In: International Sustainable Energy Summit (ISES) 2022, 29/08/2022 to 30/08/2022, Kuala Lumpur, Malaysia. (Unpublished)
Goh, K. W. and Wong, Yew Hoong and Singh, R. S. K. and Chandran, Hari and Wong, S. K. and Lee, K. Y. Sara (2022) Irradiation time-dependent study of eggshell-derived hydroxyapatite powder synthesized by microwave-assisted wet chemical precipitation method. Journal of Ceramic Processing Research, 23 (2). pp. 158-164. ISSN 1229-9162, DOI https://doi.org/10.36410/jcpr.2022.23.2.158.
Gordan, Meisam and Ong, Zhi Chao and Sabbagh-Yazdi, Saeed-Reza and Lai, Khin Wee and Ghaedi, Khaled and Ismail, Zubaidah (2022) From cognitive bias toward advanced computational intelligence for smart infrastructure monitoring. Frontiers in Psychology, 13. ISSN 1664-1078, DOI https://doi.org/10.3389/fpsyg.2022.846610.
Gordan, Meisam and Siow, Pei Yi and Deifalla, Ahmed Farouk and Ong, Zhi Chao and Ismail, Zubaidah and Khoo, Shin Yee (2022) Implementation of a secure storage using Blockchain for PCA-FRF sensor data of plate-like structures. IEEE Access, 10. pp. 84837-84852. ISSN 2169-3536, DOI https://doi.org/10.1109/ACCESS.2022.3197776.
Gul, Mustabshirha and Kalam, Md. Abul and Mohd Zulkifli, Nurin Wahidah and Hj. Hassan, Masjuki and Abbas, Md. Mujtaba and Yousuf, Sumra and Al-Dahiree, Omar Sabah and Gaffar Abbas, Md. Kamaleldin and Ahmed, Waqar and Imran, Shahab (2022) Enhancing AW/EP tribological characteristics of biolubricant synthesized from chemically modified cotton methyl-esters by using nanoparticle as additives. Industrial Lubrication and Tribology, 74 (4, SI). pp. 411-420. ISSN 0036-8792, DOI https://doi.org/10.1108/ILT-07-2021-0253.
Hashim, Syaza Ahmad and Shameli, Kamyar and Md Akhir, Fazreena Nadia and Salleh, Madihah Md and Ismail, Norliana and Hassan, Noraryana and Hara, Hirofumi and Mohamad, Edzrol Niza and Mohamad, Shaza Eva (2022) Identification of flavour chemicals and potentially harmful compounds in refill e-liquids sold in Malaysia. Journal of Advanced Research in Applied Sciences and Engineering Technology, 26 (1). 15 -22. ISSN 24621943, DOI https://doi.org/10.37934/araset.26.1.1522.
Hayyan, Adeeb and Ng, Yee-Sern and Hadj-Kali, Mohamed K. and Mohd Junaidi, Mohd Usman and Ali, Emad and Aldeehani, Ahmaad Kadmouse and Alkandari, Khaled H. and Alajmi, Falah Dh and Yeow, Andrew T. H. and Zulkifli, M. Y. and Kai, Lim Zhi and Hashim, Mohd Ali (2022) Natural and low-cost deep eutectic solvent for soap removal from crude biodiesel using low stirring extraction system. Biomass Conversion and Biorefinery, 12 (SUPPL). S113-S121. ISSN 2190-6815, DOI https://doi.org/10.1007/s13399-021-02124-2.
Huq, Tahsinul and Ong, Hwai Chyuan and Chew, Bee Teng and Leong, Kin Yuen and Kazi, Salim Newaz (2022) Review on aqueous graphene nanoplatelet nanofluids: preparation, Stability, thermophysical properties, and applications in heat exchangers and solar thermal collectors. Applied Thermal Engineering, 210. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2022.118342.
Jahan, Farheen and Soni, Manoj and Wakeel, Saif and Ahmad, Shafi and Bingol, Sedat (2022) Selection of automotive brake material using different MCDM techniques and their comparisons. Journal of Engineering Science and Technology Review, 15 (1). 24 -33. ISSN 1791-9320, DOI https://doi.org/10.25103/jestr.151.04.
Jamshaid, M. and Masjuki, H. H. and Kalam, M. A. and Zulkifli, N. W. M. and Arslan, A. and Qureshi, A. A. (2022) Experimental investigation of performance, emissions and tribological characteristics of B20 blend from cottonseed and palm oil biodiesels. Energy, 239 (A). ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2021.121894.
Jathar, Laxmikant D. and Ganesan, S. and Shahapurkar, Kiran and Soudagar, Manzoore Elahi M. and Mujtaba, M. A. and Anqi, Ali E. and Farooq, Muhammad and Khidmatgar, Abdulqhadar and Goodarzi, Marjan and Safaei, Mohammad Reza (2022) Effect of various factors and diverse approaches to enhance the performance of solar stills: a comprehensive review. Journal of Thermal Analysis and Calorimetry, 147 (7). pp. 4491-4522. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-021-10826-y.
Jatoi, Abdul Sattar and Hashmi, Zubair and Mazari, Shaukat Ali and Mubarak, Nabisab Mujawar and Karri, Rama Rao and Ramesh, Singh and Rezakazemi, Mashallah (2022) A comprehensive review of microbial desalination cells for present and future challenges. Desalination, 535. ISSN 0011-9164, DOI https://doi.org/10.1016/j.desal.2022.115808.
Javadi, Farhood Sarrafzadeh and Metselaar, Hendrik Simon Cornelis and Ganesan, Poo Balan (2022) Experimental investigation on prototype latent heat thermal battery charging and discharging function integrated with solar collector. Energy Engineering: Journal of the Association of Energy Engineering, 119 (4). 1587 -1610. ISSN 0199-8595, DOI https://doi.org/10.32604/ee.2022.020304.
Kamarudin, Yasmin and Mohd Nor, Nor Azlida and Libamin, Ann Carnelian and Suriani, Ameerah Nur Hidayah and Marhazlinda, Jamaludin and Bramantoro, Taufan and Ramadhani, Aulia and Neville, Patricia (2022) Social media use, professional behaviors online, and perceptions toward e-professionalism among dental students. Journal of Dental Education, 86 (8). pp. 958-967. ISSN 0022-0337, DOI https://doi.org/10.1002/jdd.12912.
Katta, Vamsi Krishna and Katari, Naresh Kumar and Dutta, Dimple P. and Mohd Sabri, Mohd Faizul and Ravuri, Balaji Rao (2022) Enhanced long cycle life stability and high storage reversible capacity retention of a sodium vanadate zinc glass-ceramic network. Energy & Fuels, 36 (12). pp. 6492-6501. ISSN 0887-0624, DOI https://doi.org/10.1021/acs.energyfuels.2c00597.
Khamis, Abd Alghani and Salleh, Siti Zuliana and Ab Karim, Mohd Sayuti and Mohd Rom, Noor Ashikin and Janasekaran, Shamini and Idris, Aida and Abd Rashid, Rusdi (2022) Alcohol consumption patterns: A systematic review of demographic and sociocultural influencing factors. International Journal of Environmental Research and Public Health, 19 (13). ISSN 1660-4601, DOI https://doi.org/10.3390/ijerph19138103.
Kittur, M. I. and Andriyana, Andri and Ang, Bee Chin and Ch'ng, S. Y. and Verron, E. (2022) Inelastic response of thermo-oxidatively aged carbon black filled polychloroprene rubber. Part I: Viscoelasticity. Polymer Degradation and Stability, 205. ISSN 0141-3910, DOI https://doi.org/10.1016/j.polymdegradstab.2022.110118.
Kumar, L. Harish and Kazi, S. N. and Masjuki, H. H. and Mohd Zubir, Mohd Nashrul (2022) A review of recent advances in green nanofluids and their application in thermal systems. Chemical Engineering Journal, 429. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2021.132321.
Kumar, L. Harish and Kazi, S. N. and Masjuki, H. H. and Zubir, M. N. M. and Jahan, Afrin and Sean, Oon Cheen (2022) Experimental study on the effect of bio-functionalized graphene nanoplatelets on the thermal performance of liquid flat plate solar collector. Journal of Thermal Analysis and Calorimetry, 147 (2). pp. 1657-1674. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-020-10527-y.
Kurniawan, Fajar and Musa, Siti Nurmaya and Moin, Noor Hasnah and Sahroni, Taufik Roni (2022) A systematic review on factors influencing container terminal's performance. Operations and Supply Chain Management, 15 (2). 174 – 192. ISSN 19793561, DOI https://doi.org/10.31387/oscm0490339.
Kusumo, Fitranto and Mahlia, T.M.I. and Shamsuddin, Abdul Halim and Ahmad, Abdul Rahim and Silitonga, Arridina Susan and Dharma, Surya and Mofijur, M. and Ideris, Fazril and Ong, Hwai Chyuan and Sebayang, R. and Milano, Jassinnee and Hassan, Masjuki Haji and Varman, M. (2022) Optimisation of biodiesel production from mixed Sterculia foetida and rice bran oil. International Journal of Ambient Energy, 43 (1). 4380 – 4390. ISSN 0143-0750, DOI https://doi.org/10.1080/01430750.2021.1888802.
Lah, Nurul Akmal Che and Murthy, Puhanes and Mohd Zubir, Mohd Nashrul (2022) The physical and optical investigations of the tannic acid functionalised Cu-based oxide nanostructures. Scientific Reports, 12 (1). ISSN 2045-2322, DOI https://doi.org/10.1038/s41598-022-14281-z.
Lee, Xin Jiat and Ong, Hwai Chyuan and Ooi, Jecksin and Yu, Kai Ling and Tham, Thing Chai and Chen, Wei-Hsin and Ok, Yong Sik (2022) Engineered macroalgal and microalgal adsorbents: Synthesis routes and adsorptive performance on hazardous water contaminants. Journal of Hazardous Materials, 423 (A). ISSN 0304-3894, DOI https://doi.org/10.1016/j.jhazmat.2021.126921.
Li, Hai and Khoo, Selina Phaik Lin and Yap, Hwa Jen (2022) Implementation of sequence-based classification methods for motion assessment and recognition in a traditional Chinese sport (Baduanjin). International Journal of Environmental Research and Public Health, 19 (3). ISSN 1660-4601, DOI https://doi.org/10.3390/ijerph19031744.
Li, Yongchuan and Raja Ghazilla, Raja Ariffin and Abdul-Rashid, Salwa Hanim (2022) QFD-based research on sustainable user experience optimization design of smart home products for the elderly: A case study of smart refrigerators. International Journal of Environmental Research and Public Health, 19 (21). ISSN 1660-4601, DOI https://doi.org/10.3390/ijerph192113742.
Lim, Bing Yan and Lai, Khin Wee and Hasikin, Khairunnisa and Kulathilake, K. A. Saneera Hemantha and Ong, Zhi Chao and Hum, Yan Chai and Dhanalakshmi, Samiappan and Wu, Xiang and Zuo, Xiaowei (2022) Deep learning model for prediction of progressive mild cognitive impairment to Alzheimer's disease using structural MRI. Frontiers in Aging Neuroscience, 14. ISSN 1663-4365, DOI https://doi.org/10.3389/fnagi.2022.876202.
Lin, Keyong and Musa, S. Nurmaya and Yap, Hwa Jen (2022) Vehicle Routing Optimization for Pandemic Containment: A Systematic Review on Applications and Solution Approaches. Sustainability, 14 (4). ISSN 2071-1050, DOI https://doi.org/10.3390/su14042053.
Lin, W. T. and Lin, Z. W. and Kuo, T. Y. and Chien, C. S. and Huang, J. W. and Chung, Y. L. and Chang, C. P. and Ibrahim, Mahmoud Zakaria and Lee, H. T. (2022) Mechanical and biological properties of atmospheric plasma-sprayed carbon nanotube-reinforced tantalum pentoxide composite coatings on Ti6Al4V alloy. Surface and Coatings Technology, 437. ISSN 0257-8972, DOI https://doi.org/10.1016/j.surfcoat.2022.128356.
Ling, L. C. and Buthiyappan, Archina and Abdul Raman, Abdul Aziz and Jabar, Noorul Huda Abdul and Kuldip Singh, Ramesh Singh (2022) Performance investigation of electrocoagulation and Electro-Fenton processes for high strength landfill leachate: operational parameters and kinetics. Chemical Papers, 76 (5). pp. 2991-3003. ISSN 2585-7290, DOI https://doi.org/10.1007/s11696-021-02052-5.
Liu, Yiqiao and Chong, Wen Tong and Cao, Yijuan and Liu, Hongwei and Yu, Haowei and Cui, Tong and Chang, Li and Pan, Song (2022) Characteristics analysis and modeling of occupants' window operation behavior in hot summer and cold winter region, China. Building and Environment, 216. ISSN 0360-1323, DOI https://doi.org/10.1016/j.buildenv.2022.108998.
Liu, Yiqiao and Chong, Wen Tong and Yau, Yat Huang and Chang, Li and Cui, Tong and Yu, Haowei and Cui, Ying and Pan, Song (2022) Rethinking the limitations of research on occupants? window-opening behavior: A review. ENERGY AND BUILDINGS, 277. ISSN 1872-6178,
Liu, Yunpeng and Dong, Lin and Zheng, Jiangshan and Ibrahim, Suriani and Mohd Sabri, Mohd Faizul and Abdul Majid, Nazia (2022) Switchable absorbing, reflecting, and transmitting metasurface by employing vanadium dioxide on the same frequency. Superlattices and Microstructures, 162. ISSN 0749-6036, DOI https://doi.org/10.1016/j.spmi.2021.107109.
Masoud, Fathi and Sapuan, S. M. and Ariffin, Mohd Khairol Anuar Mohd and Nukman, Yusoff and Bayraktar, Emin (2022) Experimental investigation on dimensional stability and cutting quality in cutting process of sugar palm fiber reinforced unsaturated polyester composites with laser beam and abrasive water jet cutting technologies. FIBERS AND POLYMERS, 23 (11). pp. 3179-3187. ISSN 1875-0052, DOI https://doi.org/10.1007/s12221-022-0165-8.
Moghadasi, Kaveh and Isa, Mohammad Syahid Mohd and Ariffin, Mohammad Ashraf and Jamil, Muhammad Zulhiqmi Mohd and Raja, Sufian and Wu, Bo and Yamani, Mehrdad and Muhamad, Mohd Ridha and Yusof, Farazila and Jamaludin, Mohd Fadzil and Ab Karim, Mohd Sayuti and Abdul Razak, Bushroa and Yusoff, Nukman (2022) A review on biomedical implant materials and the effect of friction stir based techniques on their mechanical and tribological properties. Journal of Materials Research and Technology-JMR&T, 17. pp. 1054-1121. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2022.01.050.
Mohammad Yusof, Nabilah and Ibrahim, Suriani and Rozali, Shaifulazuar (2022) Advances on graphene-based gas sensors for acetone detection based on its physical and chemical attributes. Journal of Materials Research, 37 (2). pp. 405-423. ISSN 0884-2914, DOI https://doi.org/10.1557/s43578-021-00456-3.
Mohd Mazlan, Muhamad Farhan and Salleh, Siti Zuliana and Ab Karim, Mohd Sayuti and Mohd Amran, Nor Amirah and Abd Rashid, Rusdi and Abd Razak, Nasrul Anuar and Kadri, Nahrizul Adib and Zahari, Zalina (2022) Development and performance evaluation of automated methadone dispenser for drug addiction therapy. Journal of Testing and Evaluation, 50 (3, SI). pp. 1299-1312. ISSN 0090-3973, DOI https://doi.org/10.1520/JTE20210709.
Mohd Shatar, Nursyahirah and Mohd Salleh, Mohd Faiz and Ani, Mohd Hanafi and Sabri, Mohd Faizul Mohd (2022) Mix wettability surface on solar still cover for freshwater productivity enhancement. Desalination, 534. ISSN 0011-9164, DOI https://doi.org/10.1016/j.desal.2022.115797.
Muhammad, Aisha and Ali, Mohammed A. H. and Turaev, Sherzod and Abdulghafor, Rawad and Shanono, Ibrahim Haruna and Alzaid, Zaid and Alruban, Abdulrahman and Alabdan, Rana and Dutta, Ashit Kumar and Almotairi, Sultan (2022) A generalized laser simulator algorithm for mobile robot path planning with obstacle avoidance. Sensors, 22 (21). ISSN 1424-8220, DOI https://doi.org/10.3390/s22218177.
Muhammad, Aisha and Ali, Mohammed A. H. and Turaev, Sherzod and Shanono, Ibrahim Haruna and Hujainah, Fadhl and Mohd Zubir, Mohd Nashrul and Ahmad Hairuddin, Muhammad Khairi Faiz and Faizal, Erma Rahayu Mohd and Abdulghafor, Rawad (2022) Novel algorithm for mobile robot path planning in constrained environment. CMC-Computers Materials & Continua, 71 (2). pp. 2697-2719. ISSN 1546-2218, DOI https://doi.org/10.32604/cmc.2022.020873.
Muzhaimey, Syarif Syahrul Syazwan and Ghazali, Nik Nazri Nik and Zainon, Mohd Zamri and Badruddin, Irfan Anjum and Hussien, Mohamed and Kamangar, Sarfaraz and Ahammad, N. Ameer (2022) Numerical investigation of heat transfer enhancement in a microchannel with conical-shaped reentrant cavity. Mathematics, 10 (22). ISSN 2227-7390, DOI https://doi.org/10.3390/math10224330.
Nair, S. R. and Oon, C. S. and Tan, M. K. and Mahalingam, Savisha and Manap, Abreeza and Kazi, Md. Salim Newaz (2022) Investigation of heat transfer performance within annular geometries with swirl-inducing fins using clove-treated graphene nanoplatelet colloidal suspension. Journal of Thermal Analysis and Calorimetry, 147 (24). pp. 14873-14890. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-022-11733-6.
Nasiri, Hossein and Delprete, Cristiana and Brusa, Eugenio and Razavykia, Abbas and Esmaeilzadeh, Alireza (2022) Analytical simulation of influential parameters affecting grooved wet clutches performance underdisengagement condition. Proceedings Of The Institution Of Mechanical Engineers Part J-journal Of Engineering Tribology, 236 (6). pp. 1113-1122. ISSN 1350-6501, DOI https://doi.org/10.1177/13506501211047783.
Naskar, Jishnu and Boatemaa, Mercy Adusei and Rumjit, Nelson Pynadathu and Thomas, George and George, P. J. and Lai, Chin Wei and Mousavi, Seyyed Mojtaba and Wong, Yew Hoong (2022) Recent advances of nanotechnology in mitigating emerging pollutants in water and wastewater: Status, challenges, and opportunities. Water Air and Soil Pollution, 233 (5). ISSN 0049-6979, DOI https://doi.org/10.1007/s11270-022-05611-y.
Naskar, Jishnu and Boatemaa, Mercy Adusei and Rumjit, Nelson Pynadathu and Thomas, George and George, P. J. and Lai, Chin Wei and Mousavi, Seyyed Mojtaba and Wong, Yew Hoong (2022) Recent advances of nanotechnology in mitigating emerging pollutants in water and wastewater: status, challenges, and opportunities. Water Air And Soil Pollution, 233 (5). ISSN ISSN 0049-6979, DOI https://doi.org/10.1007/s11270-022-05611-y.
Nezhad, Erfan Zal and Sarraf, Masoud and Musharavati, Farayi and Jaber, Fadi and Wang, Ji and Hosseini, Hamid Reza Madaah and Bae, Sungchul and Chowdhury, Muhammad and So, Hongyun and Sukiman, Nazatul Liana (2022) Effect of zirconia nanotube coating on the hydrophilicity and mechanochemical behavior of zirconium for biomedical applications. Surfaces and Interfaces, 28. ISSN 2468-0230, DOI https://doi.org/10.1016/j.surfin.2021.101623.
Ng, Yi Sheng and Yau, Zhi Yong and Ooi, Poh Choon and Auliya, Rahmat Zaki and Kurian, Thiresamary and Xie, Mengying and Tan, Sin Tee and Wong, Yew Hoong and Haniff, Muhammad Aniq Shazni Mohammad and Gan, Wee Chen and Tan, Chun Hui and Al-Bati, Sameer and Ibtehaj, Khatatbeh and Hamzah, Azrul Azlan and Dee, Chang Fu (2022) Effects of electrode materials on solution-processed polyvinylidene fluoride-based piezoelectric nanogenerators: Do they matter? Solid-State Electronics, 190. DOI https://doi.org/10.1016/j.sse.2022.108252.
Nordin, Hilman and Abdul Razak, Bushroa and Mokhtar, Norrima and Jamaludin, Mohd Fadzil (2022) A derivative oriented thresholding approach for feature extraction of mold defects on fine arts painting. In: International Conference on Artificial Life and Robotics.
Nordin, N. H. Diyana and Muthalif, Asan G. A. and Razali, M. Khusyaie M. and Ali, Abdelrahman and Salem, Ayman Mustafa (2022) Development and Implementation of Energy-Efficient Magnetorheological Fluid Bypass Damper for Prosthetics Limbs Using a Fuzzy-Logic Controller. IEEE Access, 10. pp. 18978-18987. ISSN 2169-3536, DOI https://doi.org/10.1109/ACCESS.2022.3149893.
Odesanya, Kazeem Olabisi and Ahmad, Roslina and Andriyana, Andri and Bingol, Sedat and Cetinkaya, Ridvan and Wong, Yew Hoong (2022) Thermal characterization and stress analysis of Ho2O3 thin film on 4H-SiC substrate. Materials Science in Semiconductor Processing, 152. ISSN 1369-8001, DOI https://doi.org/10.1016/j.mssp.2022.107110.
Odesanya, Kazeem Olabisi and Ahmad, Roslina and Andriyana, Andri and Bingol, Sedat and Wong, Yew Hoong (2022) Review-gate oxide thin films based on silicon carbide. ECS Journal of Solid State Science and Technology, 11 (8). ISSN 2162-8769, DOI https://doi.org/10.1149/2162-8777/ac84ff.
Odesanya, Kazeem Olabisi and Ahmad, Roslina and Andriyana, Andri and Wong, Yew Hoong (2022) Effects of oxidation duration on the structural and electrical characteristics of Ho2O3 gate oxide on 4H-SiC substrate. Journal of Electronic Materials, 51 (8, SI). pp. 4357-4367. ISSN 0361-5235, DOI https://doi.org/10.1007/s11664-022-09686-5.
Odesanya, Kazeem Olabisi and Onik, Tahsin Ahmed Mozaffor and Ahmad, Roslina and Andriyana, Andri and Ramesh, S. and Tan, Chou Yong and Wong, Yew Hoong (2022) Physical and electrical characteristics of Ho2O3 thin film based on 4H-SiC wide bandgap semiconductor. Thin Solid Films, 741. ISSN 0040-6090, DOI https://doi.org/10.1016/j.tsf.2021.138997.
Okomoda, V. T. and Ikhwanuddin, M. and Oladimeji, A. S. and Najiah, M. and Alabi, K. and Abd Salam, A. and Jauhari, Iswadi and Kasan, N. A. (2022) Rearing water quality and zootechnical parameters of Litopenaeus vannamei in rapid Biofloc (R) and conventional intensive culture system. Journal of King Saud University Science, 34 (1). ISSN 1018-3647, DOI https://doi.org/10.1016/j.jksus.2021.101729.
Onal, Busra Selenay and Kirkar, Safak Metin and Akgul, Dogan and Celen, Ali and Acikgoz, Ozgen and Dalkilic, Ahmet Selim and Kazi, Salim Newaz and Wongwises, Somchai (2022) Heat transfer and pressure drop characteristics of two phase flow in helical coils. Thermal Science and Engineering Progress, 27. ISSN 2451-9049, DOI https://doi.org/10.1016/j.tsep.2021.101143.
Parveez, Bisma and Kittur, Mohammed Ibrahim and Badruddin, Irfan Anjum and Kamangar, Sarfaraz and Hussien, Mohamed and Umarfarooq, M. A. (2022) Scientific advancements in composite materials for aircraft applications: A review. Polymers, 14 (22). ISSN 2073-4360, DOI https://doi.org/10.3390/polym14225007.
Prihandana, Gunawan Setia and Sururi, Ahmad and Sriani, Tutik and Yusof, Farazila and Jamaludin, Mohd Fadzil and Mahardika, Muslim (2022) Facile fabrication of low-cost activated carbon bonded polyethersulfone membrane for efficient bacteria and turbidity removal. Water Practice and Technology, 17 (1). 102 -111. ISSN 1751-231X, DOI https://doi.org/10.2166/wpt.2021.116.
Qureshi, Sundus Saeed and Shah, Vaishali and Nizamuddin, Sabzoi and Mubarak, N. M. and Karri, Rama Rao and Dehghani, Mohammad Hadi and Ramesh, S. and Khalid, Mohammad and Rahman, Muhammad Ekhlasur (2022) Microwave-assisted synthesis of carbon nanotubes for the removal of toxic cationic dyes from textile wastewater. Journal of Molecular Liquids, 356. DOI https://doi.org/10.1016/j.molliq.2022.119045.
Raja, Sufian and Muhamad, Mohd Ridha and Yusof, Farazila and Jamaludin, Mohd Fadzil and Suga, Tetsuo and Liu, Huihong and Morisada, Yoshiaki and Fujii, Hidetoshi (2022) Friction stir alloying of AZ61 and mild steel with Al-CNT additive. Science and Technology of Welding and Joining, 27 (7). pp. 533-540. ISSN 1362-1718, DOI 0.1080/13621718.2022.2080449.
Safarzadeh, Marjan and Chee, Chin Fei and Ramesh, Singh (2022) Effect of carbonate content on the in vitro bioactivity of carbonated hydroxyapatite. Ceramics International, 48 (13). pp. 18174-18179. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2022.03.076.
Salami, Erfan and Montazer, Elham and Ward, Thomas A. and Nik Ghazali, Nik Nazri and Badruddin, Irfan Anjum (2022) Aerodynamic performance of a dragonfly-inspired tandem wing system for a biomimetic micro air vehicle. Frontiers in Bioengineering And Biotechnology, 10. ISSN 2296-4185, DOI https://doi.org/10.3389/fbioe.2022.787220.
Salleh, Siti Zuliana and Bushroa, Abd Razak (2022) Bibliometric and content analysis on publications in digitization technology implementation in cultural heritage for recent five years (2016–2021). Digital Applications in Archaeology and Cultural Heritage, 25. ISSN 2212-0548, DOI https://doi.org/10.1016/j.daach.2022.e00225.
Sandu, V and Aldica, G. and Grigoroscuta, M. A. and Burdusel, M. and Pasuk, I and Ching, Y. C. and Ionescu, A. M. and Badica, P. (2022) Effect of polysilane addition on spark plasma sintering and superconducting properties of MgB2 bulks. CERAMICS INTERNATIONAL, 48 (21). pp. 31914-31922. ISSN 1873-3956, DOI https://doi.org/10.1016/j.ceramint.2022.07.127.
Sanjeevannavar, Mallesh B. and Banapurmath, N. R. and Soudagar, Manzoore Elahi M. and Atgur, Vinay and Hossain, Nazia and Mujtaba, M. A. and Khan, T. M. Yunus and Rao, B. Nageswar and Ismail, Khadiga Ahmed and Elfasakhany, Ashraf (2022) Performance indicators for the optimal BTE of biodiesels with additives through engine testing by the Taguchi approach. Chemosphere, 288 (2). ISSN 0045-6535, DOI https://doi.org/10.1016/j.chemosphere.2021.132450.
Sarraf, Masoud and Rezvani Ghomi, Erfan and Alipour, Saeid and Ramakrishna, Seeram and Sukiman, Nazatul Liana (2022) A state-of-the-art review of the fabrication and characteristics of titanium and its alloys for biomedical applications. Bio-Design and Manufacturing, 5 (2). pp. 371-395. ISSN 2096-5524, DOI https://doi.org/10.1007/s42242-021-00170-3.
Sarsam, Wail Sami and Kazi, S. N. and Badarudin, A. (2022) Thermal performance of a flat-plate solar collector using aqueous colloidal dispersions of multi-walled carbon nanotubes with different outside diameters. Experimental Heat Transfer, 35 (3). pp. 258-281. ISSN 0891-6152, DOI https://doi.org/10.1080/08916152.2020.1847215.
Sathish, T. and Mohanavel, V. and Arunkumar, M. and Rajan, K. and Soudagar, Manzoore Elahi M. and Mujtaba, M. A. and Salmen, Saleh H. and Al Obaid, Sami and Fayaz, H. and Sivakumar, S. (2022) Utilization of Azadirachta indica biodiesel, ethanol and diesel blends for diesel engine applications with engine emission profile. Fuel, 319. DOI https://doi.org/10.1016/j.fuel.2022.123798.
Shan, L. and Tan, Chou Yong and Shen, X. and Ramesh, S. and Kolahchi, R. and Hajmohammad, M. H. and Rajak, D. K. (2022) Creep behavior of A356 aluminum alloy reinforced with multi-walled carbon nanotubes by stir casting. Materials, 15 (24). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15248959.
Sivarao, S. and Sivakumar, S. and Ramesh, S. and Lee, K.Y. Sara and Salleh, M.S. and Ali, M.A.M. and Rao, Dharsyanth and Kumaran, K. and Pujari, S. and Vatesh, U.K. (2022) Finite element analysis of stress distribution on high-heeled shoes. Journal of Engineering Science and Technology, 17 (6). 4082 -4091. ISSN 18234690,
Soo, Yew Hang and Ng, Chai Yan and Jun, Hieng Kiat and Ng, Soo Ai and Wong, Yew Hoong (2022) Metal oxide sol annealing on perovskite MAPbI(3) film with thermal stability enhanced by caffeine additive and PMMA interlayer. Journal of Materials Science, 57 (22, SI). pp. 10242-10259. ISSN 0022-2461, DOI https://doi.org/10.1007/s10853-022-07335-0.
Soudagar, Manzoore Elahi M. and Afzal, Asif and Safaei, Mohammad Reza and Manokar, A. Muthu and EL-Seesy, Ahmed and Mujtaba, M. A. and Samuel, Olusegun David and Badruddin, Irfan Anjum and Ahmed, Waqar and Shahpurkar, Kiran and Goodarzi, Marjan (2022) Investigation on the effect of cottonseed oil blended with different percentages of octanol and suspended MWCNT nanoparticles on diesel engine characteristics. Journal of Thermal Analysis and Calorimetry, 147 (1). pp. 525-542. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-020-10293-x.
Su, Guangcan and Mohd Zulkifli, Nurin Wahidah and Ong, Hwai Chyuan and Ibrahim, Shaliza and Bu, Quan and Zhu, Ruonan (2022) Pyrolysis of oil palm wastes for bioenergy in Malaysia: A review. Renewable & Sustainable Energy Reviews, 164. ISSN 1364-0321, DOI 0.1016/j.rser.2022.112554.
Su, Guangcan and Ong, Hwai Chyuan and Cheah, Mei Yee and Chen, Wei-Hsin and Lam, Su Shiung and Huang, Yuhan (2022) Microwave-assisted pyrolysis technology for bioenergy recovery: Mechanism, performance, and prospect. Fuel, 326. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2022.124983.
Su, Guangcan and Ong, Hwai Chyuan and Fattah, I. M. Rizwanul and Ok, Yong Sik and Jang, Jer-Huan and Wang, Chin-Tsan (2022) State-of-the-art of the pyrolysis and co-pyrolysis of food waste: Progress and challenges. Science of The Total Environment, 809. ISSN 0048-9697, DOI https://doi.org/10.1016/j.scitotenv.2021.151170.
Su, Guangcan and Ong, Hwai Chyuan and Mofijur, M. and Mahlia, T. M. Indra and Ok, Yong Sik (2022) Pyrolysis of waste oils for the production of biofuels: A critical review. Journal of Hazardous Materials, 424 (B). ISSN 0304-3894, DOI https://doi.org/10.1016/j.jhazmat.2021.127396.
Su, Guangcan and Ong, Hwai Chyuan and Mohd Zulkifli, Nurin Wahidah and Ibrahim, Shaliza and Chen, Wei Hsin and Chong, Cheng Tung and Ok, Yong Sik (2022) Valorization of animal manure via pyrolysis for bioenergy: A review. Journal of Cleaner Production, 343. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2022.130965.
Sulthana, Razia and Taqui, Syed Noeman and Syed, Usman Taqui and Soudagar, Manzoore Elahi M. and Mujtaba, M.A. and Mir, Rayees Afzal and Shahapurkar, Kiran and Khidmatgar, Abdulqhadar and Mohanavel, V. and Syed, Akheel Ahmed and Hossain, Nazia (2022) Biosorption of crystal violet by nutraceutical industrial fennel seed spent equilibrium, kinetics, and thermodynamic studies. Biocatalysis and Agricultural Biotechnology, 43. ISSN 1878-8181, DOI https://doi.org/10.1016/j.bcab.2022.102402.
Sunil, Kumar S and Londe, Neelakantha V and Dilip, Kumar K and Kittur, M.I. and Badruddin, Irfan Anjum and Faheem, Mohammed and Khan, Sher Afghan (2022) On mechanical response of aluminum alloys in corrosive environment. International Journal of Integrated Engineering, 14 (1). 48 – 56. ISSN 2229-838X, DOI https://doi.org/10.30880/ijie.2022.14.01.005.
Tam, Jun Hui (2022) Overview of performing shore-to-ship and ship-to-ship compatibility studies for LNG bunker vessels. Journal Of Marine Engineering And Technology, 21 (5). pp. 257-270. ISSN 2046-4177, DOI https://doi.org/10.1080/20464177.2020.1827489.
Tan, Huiyi and Wong, Keng Yinn and Nyakuma, Bemgba Bevan and Kamar, Haslinda Mohamed and Chong, Wen Tong and Luing Wong, Syie and Kang, Hooi Siang (2022) Systematic study on the relationship between particulate matter and microbial counts in hospital operating rooms. Environmental Science and Pollution Research, 29 (5). pp. 6710-6721. ISSN 0944-1344, DOI https://doi.org/10.1007/s11356-021-16171-9.
Thakur, Amrit Kumar and Sathyamurthy, Ravishankar and Saidur, R. and Velraj, R. and Lynch, Iseult and Aslfattahi, Navid (2022) Exploring the potential of MXene-based advanced solar-absorber in improving the performance and efficiency of a solar-desalination unit for brackish water purification. Desalination, 526. ISSN 0011-9164, DOI https://doi.org/10.1016/j.desal.2021.115521.
Thi, Bang Le and Long, Bui Duc and Trung, Trinh Van and Thanh, Nguyen T Van and Ramesh, S. (2022) Nanocrystalline hydroxyapatite prepared at different precursor concentrations: thermal stability, morphology and in vitro cellular response. Ceramics-Silik�ty, 66 (1). pp. 19-27. ISSN 0862-5468, DOI https://doi.org/10.13168/cs.2021.0048.
Tuan Zaharinie, Tuan Zahari and Huda, Zainul and Ibrahim, Suriani and Yusof, Farazila and Abd Shukor, Mohd Hamdi and Rehan, Mohammad and Ariga, Tadashi (2022) Analysis of the reaction layer formed during Sapphire-Sapphire brazing using a Ag-Cu-Ti filler metal for gas-pressure sensors. ACS Applied Electronic Materials, 4 (5). pp. 2405-2412. ISSN 2637-6113, DOI https://doi.org/10.1021/acsaelm.2c00213.
Ung, Shern-Khai and Chong, Wen-Tong and Mat, Shabudin and Ng, Jo-Han and Kok, Yin-Hui and Wong, Kok-Hoe (2022) Investigation into the aerodynamic performance of a vertical axis wind turbine with endplate design. Energies, 15 (19). ISSN 1996-1073, DOI https://doi.org/10.3390/en15196925.
Uppin, Vinayak S. and Gouda, P. S. Shivakumar and Kittur, M. I. and Andriyana, Andri and Ang, Bee Chin and Parveez, Bisma and Badruddin, Irfan Anjum and Javed, Syed and Kamangar, Sarfaraz (2022) Mechanical Response of Glass-Epoxy Composites with Graphene Oxide Nanoparticles. MATERIALS, 15 (23). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15238545.
Van Toan, Nguyen and Ito, Keisuke and Tuoi, Truong Thi Kim and Toda, Masaya and Chen, Po -Hung and Mohd Sabri, Mohd Faizul and Li, Jinhua and Ono, Takahito (2022) Micro-heat sink based on silicon nanowires formed by metal-assisted chemical etching for heat dissipation enhancement to improve performance of micro-thermoelectric generator. Energy Conversion and Management, 267. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2022.115923.
Wang, Chin-Tsan and Lan, Tzu-Hsuan and Chong, Wen-Tong and Ong, Hwai-Chyuan and Chen, Shi-Xun (2022) An optimal inlet flow angle design of vascular-type micromixer. Journal of the Chinese Society of Mechanical Engineers, 43 (1). pp. 57-62. ISSN 0257-9731,
Wang, Chin-Tsan and Lan, Tzu-Hsuan and Ubando, Aristotle T. and Chong, Wen Tong and Culaba, Alvin B. and Yang, Yung-Chin (2022) Effect of nanowire conductive transfer on the performance of batch-microbial fuel cells. International Journal of Energy Research, 46 (5). pp. 6919-6928. ISSN 0363-907X, DOI https://doi.org/10.1002/er.7568.
Wang, Xiao Hang and Wong, Kok Hoe and Chong, Wen Tong and Ng, Jo Han and Qiu, Cheng Jun and Khor, Chong Shen (2022) Performance evaluation of a downwind diffuser on vertical axis wind turbine. International Journal of Energy Research, 46 (1, SI). pp. 351-369. ISSN 0363-907X, DOI https://doi.org/10.1002/er.6890.
Wang, Xinru and Xia, Liang and Pei, Fei and Chang, Li and Chong, Wen Tong and Wang, Zu and Pan, Song (2022) Particulate matter (PM2.5 and PM10) concentration of subway transfer stations in Beijing, China. Sustainability, 14 (3). ISSN 2071-1050, DOI https://doi.org/10.3390/su14031552.
Wen, Baohua and Liang, Lihua and Xu, Feng and Yan, Jianwei and Yan, Xiangqi and Ramesh, Singh (2022) Framework for updating green building rating tools for developing countries. Journal of Green Building, 17 (4). pp. 41-77. DOI https://doi.org/10.3992/jgb.17.4.41.
Win, Lai Lai and Aziz, Faieza Abdul and Hairuddin, Abdul Aziz and Abdullah, Lili Nurliyana and Yap, Hwa Jen and Saito, Hideo and Seyajah, Norhisham (2022) Effectiveness on training method using virtual reality and augmented reality applications in automobile engine assembly. ASEAN Engineering Journal, 12 (4). 83 -88. ISSN 25869159, DOI https://doi.org/10.11113/aej.V12.18009.
Wong, C. M. and Yau, Y. H. and Ong, H. C. and Chin, W. M. (2022) Study of climate change impacts on the lifespan of a bin weather data set in Senai, Malaysia. Urban Climate, 44. ISSN 2212-0955, DOI https://doi.org/10.1016/j.uclim.2022.101219.
Yang, Fan and Liu, Qiulin and Li, Guodong and Zhang, Xiaofan and Rozali, Shaifulazuar and Nik Ghazali, Nik Nazri and Mohd Sabri, Mohd Faizul and Zhao, Huaizhou (2022) Effect of additives and optimized Cyclic voltammetry parameters on the morphology of electrodeposited Tellurium thin film. Journal of Electroanalytical Chemistry, 925. ISSN 1572-6657, DOI https://doi.org/10.1016/j.jelechem.2022.116872.
Yap, Soon Poh and Goh, Yingxin and Goh, Wan Xien and Mo, Kim Hung and Liu, Michael Yong Jing and Ibrahim, Hussein Adebayo (2022) Relationship between microstructure and performance of polypropylene fibre reinforced cement composites subjected to elevated temperature. European Journal Of Environmental And Civil Engineering, 26 (5). pp. 1792-1806. ISSN 1964-8189, DOI https://doi.org/10.1080/19648189.2020.1734489.
Yau, Yat Huang and Poh, H. H. (2022) Novel numerical modeling of concentric and lateral capillary tube suction line heat exchangers. Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, 46 (3). pp. 693-704. ISSN 2228-6187, DOI https://doi.org/10.1007/s40997-022-00495-z.
Yau, Yat Huang and Poh, Kai Sin and Badarudin, Ahmad (2022) A techno-economical study of a solar-assisted under-floor air distribution system for buildings in the tropics. Sustainable Energy Technologies and Assessments, 51. ISSN 2213-1388, DOI https://doi.org/10.1016/j.seta.2021.101915.
Yau, Yat Huang and Rajput, Umair Ahmed (2022) Thermal comfort assessment and design guidelines of a VRF-Integrated stratum ventilation system for a large tropical building. Arabian Journal for Science and Engineering, 47 (12). pp. 16149-16170. ISSN 2191-4281, DOI https://doi.org/10.1007/s13369-022-06823-4.
Yau, Yat Huang and Rajput, Umair Ahmed and Rajpar, Altaf Hussain and Lastovets, Natalia (2022) Effects of air supply terminal devices on the performance of variable refrigerant flow integrated stratum ventilation system: An experimental study. Energies, 15 (4). ISSN 1996-1073, DOI https://doi.org/10.3390/en15041265.
Yau, Yat Huang and Toh, Hui Sin and Chew, Bee Teng and Ghazali, Nik Nazri Nik (2022) A review of human thermal comfort model in predicting human-environment interaction in non-uniform environmental conditions. Journal of Thermal Analysis and Calorimetry, 147 (24). pp. 14739-14763. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-022-11585-0.
Yip, Sook Yee and Che, Hang Seng and Tan, Chee Pin and Chong, Wen Tong (2022) An improved look-up table-based direct torque control for permanent magnet synchronous generator using Vienna rectifier. International Journal of Electrical Power & Energy Systems, 138. ISSN 0142-0615, DOI https://doi.org/10.1016/j.ijepes.2021.107875.
Yit, Jing Ee and Yau, Yat Huang and Chew, Bee Teng (2022) Empirical modelling of filtration performance for the fibrous air filters with final resistance recommendation. Results in Engineering, 16. ISSN 25901230, DOI https://doi.org/10.1016/j.rineng.2022.100732.
Yusoff, M. N. A. M. and MOHD ZULKIFLI, NURIN WAHIDAH and Sukiman, NAZATUL LIANA and Kalam, M. A. and Masjuki, H. H. and Syahir, A. Z. and Awang, M. S. N. and Mujtaba, M. A. and Milano, J. and Shamsuddin, A. H. (2022) Microwave irradiation-assisted transesterification of ternary oil mixture of waste cooking oil - Jatropha curcas - Palm oil: Optimization and characterization. Alexandria Engineering Journal, 61 (12). pp. 9569-9582. ISSN 1110-0168, DOI https://doi.org/10.1016/j.aej.2022.03.040.
Zahri, Nur Amirah Mohd and Yusof, Farazila and Miyashita, Yukio and Ariga, Tadashi and Abdul, Haseeb and Sukiman, Nazatul Liana (2022) Effect of porous copper pore density on joint interface: microstructure and mechanical analysis. Journal of Harbin Institute of Technology (New Series), 29 (1). 24 – 31. ISSN 10059113, DOI https://doi.org/10.11916/j.issn.1005-9113.2020056.
Zakaria, Nurul Zariah Jakaria and Rozali, Shaifulazuar and Mubarak, Nabisab Mujawar and Khalid, Mohammad (2022) Synthesis of magnetic nanocarbon using palm oil as the green precursor via microwave-assisted arc for wastewater treatment. SCIENTIFIC REPORTS, 12 (1). DOI https://doi.org/10.1038/s41598-022-21982-y.
Zulkeflee, Muhammad Fauzan and Dzulkifli, Norazkifni Faizura and Mamat, Azuddin (2022) Water-in-sunflower seed oil emulsion as a dielectric fluid for micro electrical discharge machining (mu EDM). Revista Materia, 27 (4). DOI https://doi.org/10.1590/1517-7076-RMAT-2022-0208.
Zuo, Zhaoyang and Haowei, Ma and Yarigarravesh, Mahdireza and Assari, Amir Hossein and Tayyebi, Moslem and Tayebi, Morteza and Hamawandi, Bejan (2022) Microstructure, fractography, and mechanical properties of Hardox 500 steel TIG-welded joints by using different filler weld wires. MATERIAL, 15 (22). ISSN 1996-1944, DOI https://doi.org/10.3390/ma15228196.
