 | Up a level |
Ibrahim, Mahmoud Z. and Halilu, Ahmed and Sarhan, Ahmed A. D. and Kuo, T. Y. and Yusuf, Farazila and Shaikh, M. O. and Hamdi, M. (2022) In-vitro viability of laser cladded Fe-based metallic glass as a promising bioactive material for improved osseointegration of orthopedic implants. Medical Engineering & Physics, 102. ISSN 1350-4533, DOI https://doi.org/10.1016/j.medengphy.2022.103782.
Sarhan, Ahmed A. D. and Maher, Ibrahem and Hamdi, M. (2021) Development of a new cost performance index (CPI) for selecting the most suitable wire electrode in Wire-EDM machining. Arabian Journal for Science and Engineering, 46 (12). pp. 12465-12478. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-021-05989-7.
Ibrahim, Mahmoud Z. and Sarhan, Ahmed A. D. and Kuo, T. Y. and Yusof, Farazila and Hamdi, M. and Lee, T. M. (2020) Developing a new laser cladded FeCrMoCB metallic glass layer on nickel-free stainless-steel as a potential superior wear-resistant coating for joint replacement implants. Surface & Coatings Technology, 392. ISSN 02578972, DOI https://doi.org/10.1016/j.surfcoat.2020.125755.
Baradaran, S. and Moghaddam, E. and Nasiri-Tabrizi, B. and Basirun, Wan Jefrey and Mehrali, M. and Sookhakian, M. and Hamdi, M. and Alias, Y. (2015) Characterization of nickel-doped biphasic calcium phosphate/graphene nanoplatelet composites for biomedical application. Materials Science and Engineering: C, 49. pp. 656-668. ISSN 0928-4931, DOI https://doi.org/10.1016/j.msec.2015.01.050.
Moshwan, R. and Rahmat, S.M. and Yusof, F. and Hassan, M.A. and Hamdi, M. and Fadzil, M. (2015) Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy. International Journal of Materials Research, 106 (3). pp. 258-266. ISSN 1862-5282, DOI https://doi.org/10.3139/146.111172.
Maher, I. and Sarhan, A.A.D. and Hamdi, M. (2015) Review of improvements in wire electrode properties for longer working time and utilization in wire EDM machining. The International Journal of Advanced Manufacturing Technology, 76 (1-4). pp. 329-351. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-014-6243-3.
Marashi, H. and Sarhan, A.A.D. and Hamdi, M. (2015) Employing Ti nano-powder dielectric to enhance surface characteristics in electrical discharge machining of AISI D2 steel. Applied Surface Science, 357 (A). pp. 892-907. ISSN 0169-4332, DOI https://doi.org/10.1016/j.apsusc.2015.09.105.
Maher, I. and Sarhan, A.A.D. and Barzani, M.M. and Hamdi, M. (2015) Increasing the productivity of the wire-cut electrical discharge machine associated with sustainable production. Journal of Cleaner Production, 108 (A). pp. 247-255. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2015.06.047.
Mahmoodian, R. and Yahya, R. and Dabbagh, A. and Hamdi, M. and Hassan, M.A. (2015) Investigation of Embedded Si/C System Exposed to a Hybrid Reaction of Centrifugal-Assisted Thermite Method. PLoS ONE, 10 (12). ISSN 1932-6203,
Mahmoodian, R. and Hamdi, M. and Hassan, M.A. and Akbari, A. (2015) Mechanical and chemical characterization of a TiC/C system synthesized using a focus plasma arc. PLoS ONE, 10 (6). p. 10. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0130836.
Lutfi, M. and Rahbari, R.G. and Hamdi, M. and Fadzil, M. and Yusof, F. (2014) Characteristics of hybrid microwave sintering of Zn-Al-Cu-Mg alloy. Materials Research Innovations, 18 (S6). pp. 78-83.
Krishnamurithy, G. and Murali, M.R. and Hamdi, M. and Abbas, A.A. and Raghavendran, H.B. and Kamarul, Tunku (2014) Characterization of bovine-derived porous hydroxyapatite scaffold and its potential to support osteogenic differentiation of human bone marrow derived mesenchymal stem cells. Ceramics International, 40 (1). pp. 771-777. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2013.06.067.
Zaharinie, T. and Yusof, F. and Fadzil, M. and Hamdi, M. and Ariga, T. (2014) Microstructural analysis of brazing sapphire and inconel 600 for sensor applications. Materials Research Innovations, 18 (S6). pp. 68-72.
Rahmat, S.M. and Hamdi, M. and Yusof, F. and Moshwan, R. (2014) Preliminary study on the feasibility of friction stir welding in 7075 aluminium alloy and polycarbonate sheet. Materials Research Innovations, 18 (S6). pp. 515-519.
Fessi, B.A. and Benabdallah, S. and Boudriga, N. and Hamdi, M. (2014) A multi-attribute decision model for intrusion response system. Information Sciences, 270. pp. 237-254. ISSN 00200255, DOI https://doi.org/10.1016/j.ins.2014.02.139.
Adzila, S. and Sopyan, I. and Yong, T.C. and Ramesh, Singh and Wong, Yew Hoong and Purbolaksono, J. and Hamdi, M. (2013) Mechanochemical synthesis of nanohydroxyapatite bioceramics. Indian Journal of Chemistry : A, 52A. pp. 1570-1575. ISSN 0376-4710,
Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2013) Investigating the effects of hard anodizing parameters on surface hardness of hard anodized aerospace AL7075-T6 alloy using fuzzy logic approach for fretting fatigue application. The International Journal of Advanced Manufacturing Technology. pp. 1-12.
Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2013) Optimizing the PVD TiN thin film coating as parameters on aerospace AL7075-T6 alloy for higher coating hardness and adhesion with better tribological properties of the coating surface. The International Journal of Advanced Manufacturing Technology, 64 (1-4). pp. 281-290. ISSN 0268-3768,
Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2013) Surface hardness prediction of CrN thin film coating on AL7075-T6 alloy using fuzzy logic system. International Journal of Precision Engineering and Manufacturing, 14 (3). pp. 467-473. ISSN 2234-7593,
Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2013) A fuzzy logic based model to predict surface hardness of thin film TiN coating on aerospace AL7075-T6 alloy. The International Journal of Advanced Manufacturing Technology. pp. 1-9. ISSN 0268-3768,
Hassan, Mohamed Mohsen Abdel-Naeim and Hamdi, M. and Naderi, S. and Zahedi, F. (2012) Effect of curvature and thickness of aluminum shells on the energy absorption in low velocity impact. Advanced Materials Research, 488. pp. 40-45. ISSN 3037853824,
Ghani, A.R.A. and Hassan, Mohamed Mohsen Abdel-Naeim and Taha, Z. and Hamdi, M. (2012) Effect of slot geometry on the impact response of square column. Advanced Science Letters, 13 (1). pp. 1-7. ISSN 1936-6612,
Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2012) Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy. Materials Science and Engineering: A. ISSN 0921-5093,
Ramesh, Singh and Purbolaksono, J. and Hamdi, M. and Sopyan, I. and Tolouei, R. and Amiriyan, M. and Tarlochan, F. and Teng, W.D. (2012) Low-temperature degradation (LTD) behaviour of CuO-Doped tetragonal zirconia ceramic. Ceramics-Silikáty, 56 (1). pp. 15-19. ISSN 0862-5468,
Ramesh, S. and Aw, K.L. and Tolouei, R. and Amiriyan, M. and Tan, C.Y. and Hamdi, M. and Purbolaksonoa, J. and Hassan, Mohamed Mohsen Abdel-Naeim and Teng, W.D. (2012) Sintering properties of hydroxyapatite powders prepared using different methods. Ceramics International. ISSN 0272-8842,
Sarhan, Ahmed Aly Diaa Mohammed and Zalnezhad, E. and Hamdi, M. (2012) The influence of higher surface hardness on fretting fatigue life of hard anodized aerospace AL7075-T6 alloy. Materials Science and Engineering: A. ISSN 0921-5093,
Sayuti, M. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2012) An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy. The International Journal of Advanced Manufacturing Technology. pp. 1-17. ISSN 0268-3768,
Hassan, Mohamed Mohsen Abdel-Naeim and Hamdi, M. and Noma, A. (2012) The nonlinear elastic and viscoelastic passive properties of left ventricular papillary muscle of a guinea pig heart. Journal of the Mechanical Behavior of Biomedical Materials, 5 (1). pp. 99-109. ISSN 1751-6161,
Abu Kasim, Noor Hayaty and Madfa, A.A. and Hamdi, M. and Rahbari, G.R. (2011) 3D-FE analysis of functionally graded structured dental posts. Dental Materials Journal, 30 (6). pp. 869-880. ISSN 0287-4547,
Ramesh, Singh and Amiriyan, M. and Meenaloshini, S. and Tolouei, R. and Hamdi, M. and Pruboloksono, J. and Teng, W.D. (2011) Densification behaviour and properties of manganese oxide doped Y-TZP ceramics. Ceramics International, 37 (8). pp. 3583-3590. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2011.06.014.
Rahbari, R.G. and Abu Kasim, Noor Hayaty and Madfa, A.A. and Hamdi, M. and Bayat, M. (2011) Porosity reduction model in titanium–hydroxyapatite FGM composites using shrinkage measurement. Materials Research Innovations, 15 (Sup.2). s110-s113. ISSN 1432-8917, DOI https://doi.org/10.1179/143307511X13031890748281.
Rashid, A.Z. and Purbolaksono, J. and Ramesh, Singh and Hamdi, M. and Ahmad, A. and Tarlochan, F. (2011) Role of physical and mechanical properties of stainless steels in expected thermal fatigue life of plenum barrier plate of a gas turbine frame. Engineering Failure Analysis, 18 (8). pp. 2336-2342.
Ramesh, Singh and Tolouei, R. and Hamdi, M. and Purbolaksono, J. and Tan, C.Y. and Amiriyan, M. and Teng, W.D. (2011) Sintering behavior of nanocrystalline hydroxyapatite produced by wet chemical method. Current Nanoscience, 7 (6). pp. 845-849. ISSN 1573-4137, DOI https://doi.org/10.2174/157341311798220538.
Toque, J.A. and Herliansyah, M.K. and Hamdi, M. and Ide-Ektessabi, A. and Sopyan, I. (2010) Adhesion failure behavior of sputtered calcium phosphate thin film coatings evaluated using microscratch testing. Journal of the Mechanical Behavior of Biomedical Materials, 3 (4). pp. 324-330. ISSN 1751-6161,
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan and Saidur, R. and Hamdi, M. (2010) Influence of substrate temperatures on structural, morphological and optical properties of rf-sputtered anatase TiO2 films. Arabian Journal for Science and Engineering, 35 (1C). pp. 147-156. ISSN 1319-8025,
Madfa, A. and Abu Kasim, Noor Hayaty and Hamdi, M. and Rahbari, R.G. and Bayat, M. (2010) Thermo-mechanical stress in multilayered dental post due to temperature gradient. University of Malaya, Kuala Lumpur, Malaysia.
Madfa, A.A. and Abu Kasim, Noor Hayaty and Hamdi, M. and Rahbari G, R. and Latifi, M.H. (2009) A finite element study of the multilayered structured dental post. 2nd Meeting of IADR Pan Asian Pacific Federation (PAPF) and the 1st Meeting of IADR Asia/Pacific Region (APR).
Rahbari G, R. and Saw, L.H. and Hamdi, M. and Yahya, Rosiyah (2009) Combustion synthesis of TiO 2-Al-C/Al 2O 3 mixture in the presence of oxygen. Journal of Physics: Conference Series, 152 (1). 012055. ISSN 1742-6588, DOI https://doi.org/10.1088/1742-6596/152/1/012055.
Hasan, M.M. and Haseeb, A.S. Md. Abdul and Saidur, Rahman and Masjuki, Haji Hassan and Hamdi, M. (2009) Synthesis and annealing of nanostructured TiO2 films by radio-frequency magnetron sputtering. Journal of Applied Sciences, 9 (15). pp. 2815-2821. ISSN 1812-5654, DOI https://doi.org/10.3923/jas.2009.2815.2821.
Sopyan, I. and Ramesh, Singh and Hamdi, M. (2008) Synthesis of nano sized hydroxyapatite powder using sol-gel technique and its conversion to dense and porous bodies. Indian Journal of Chemistry Section a-Inorganic Bio-Inorganic Physical Theoretical & Analytical Chemistry, 47 (11). pp. 1626-1631. ISSN 0376-4710,
