Laboratory assessment of the performance and elastic behavior of asphalt mixtures containing steel slag aggregate and synthetic fibers

Alnadish, A.M. and Aman, M.Y. and Katman, H.Y.B. and Ibrahim, Mohd Rasdan (2021) Laboratory assessment of the performance and elastic behavior of asphalt mixtures containing steel slag aggregate and synthetic fibers. International Journal of Pavement Research and Technology, 14 (4). pp. 473-481. ISSN 19966814, DOI https://doi.org/10.1007/s42947-020-1149-y.

Full text not available from this repository.
Official URL: https://www.scopus.com/inward/record.uri?eid=2-s2....

Abstract

This study focused on the assessment of the performance of fiber-modified asphalt mixtures containing steel slag aggregates. The asphalt mixtures incorporating coarse steel slag aggregate were reinforced with three types of synthetic fibers polyvinyl alcohol, acrylic and polyester at the dosage of 0.3 by weight of the aggregates. The performance tests were resilient modulus, rutting resistance, moisture sensitivity and cracking resistance. The results showed that the resilient modulus of the reinforced mixtures was slightly lower than the reference mixtures at all frequencies. Additionally, the rut depth of the reinforced mixtures was lower than the reference mixtures due to the densification. Otherwise, the reinforced asphalt mixtures showed better resistance to rutting than the control mixtures after excluding the deformation caused by the densification. The indirect tensile strength and tensile strength ratio of the reinforced asphalt mixtures were higher than the mixture containing steel slag aggregate. The cracking resistance of the reinforced mixture was the best in comparison with the other mixtures at the applied load at the high frequencies. While the reinforced asphalt mixtures showed the worst resistance to cracking at the applied load with low frequency of 2.5 Hz. © 2020, Chinese Society of Pavement Engineering. Production and hosting by Springer Nature.

Item Type: Article
Funders: UNSPECIFIED
Uncontrolled Keywords: Acrylic; Cracking; Elastic behavior; Permanent deformation; Polyester; Polyvinyl alcohol; Steel slag
Subjects: T Technology > T Technology (General)
T Technology > TA Engineering (General). Civil engineering (General)
Divisions: Faculty of Engineering
Faculty of Engineering > Department of Civil Engineering
Depositing User: Ms Zaharah Ramly
Date Deposited: 27 Nov 2023 04:38
Last Modified: 29 Nov 2023 03:42
URI: http://eprints.um.edu.my/id/eprint/35756

Actions (login required)

View Item View Item