Items where Subject is "T Technology > T Technology (General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 1124.

A

A. Aziz, U. (1983) Harmony between rigorous empiricism and creative insight leads to excellence in research for development. In: International Symposium on Technology, Culture and Development, 12-14 Dec 1983, University of Malaya.

Abadullah, N. and Ghazal, G. (2014) Technology and literacy in a synergy: Understanding children techno-literacy for e-book design. In: Fourth Asian Literature and Librarianship, 03-06 Apr 2014, Osaka, Japan. (Submitted)

Abd Aziz, N. and Musa, G. and Sulaiman, A. (2010) The influence of predictors on travel web site adoption among Malaysian travellers. African Journal of Marketing Management, 2 (6). pp. 107-122.

Abd Rahman, H.S. and Abu Osman, N.A. and Wan Abas, Wan Abu Bakar and Tunku Ahmad, T.S. and Ng, E.S. (2008) Validation of finite element analysis for a new external finger fixator to correct flexion deformity - a preliminary result. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Abd Rashid, A.F. and Yusoff, S. (2015) A review of life cycle assessment method for building industry. Renewable & Sustainable Energy Reviews, 45. pp. 244-248. ISSN 1364-0321

Abd Razak, N.A. and Abu Osman, N.A. and Ali, S. and Gholizadeh, H. and Wan Abas, Wan Abu Bakar (2015) Comparison study of the prosthetics interface pressure profile of air splint socket and ICRC polypropylene socket for upper limb prosthetics. Biocybernetics and Biomedical Engineering, 35 (2). pp. 100-105. ISSN 0208-5216

Abd Razak, N.A. and Abu Osman, N.A. and Kamyab, M. and Wan Abas, W.A.B. and Gholizadeh, H. (2014) Satisfaction and problems experienced with wrist movements: comparison between a common body-powered prosthesis and a new biomechatronics prosthesis. American Journal of Physical Medicine and Rehabilitation. ISSN 0894-9115

Abd Razak, N.A. and Abu Osman, N.A. and Wan Abas, W.A.B. (2013) Kinematic comparison of the wrist movements that are possible with a biomechatronics wrist prosthesis and a body-powered prosthesis: a preliminary study. Disability and Rehabilitation: Assistive Technology, 8 (3). pp. 255-260. ISSN 1748-3107

Abd Razak, N.A. and Abu Osman, N.A. and Wan Abas, W.A.B. and Ahmad Fu'ad, A.N. (2011) Comparison study of the transradial prosthetics and biological hand using motion analysis approach. In: International MultiConference of Engineers and Computer Scientists 2011, IMECS 2011, 2011, Kowloon.

Abd Sukor, J. and Mohktar, M.S. and Redmond, S.J. and Lovell, N.H. (2015) Signal quality measures on pulse oximetry and blood pressure signals acquired from self-measurement in a home environment. IEEE Journal of Biomedical and Health Informatics, 19 (1). pp. 102-108. ISSN 2168-2194

Abdollahi, Y. and Sairi, N.A. and Aroua, M.K. and Masoumi, H.R.F. and Jahangirian, H. and Alias, Y. (2015) Fabrication modeling of industrial CO2 ionic liquids absorber by artificial neural networks. Journal of Industrial and Engineering Chemistry, 25. pp. 168-175. ISSN 1226-086X

Abdolvand, H. and Sohrabi, H. and Faraji, G. and Yusof, F. (2015) A novel combined severe plastic deformation method for producing thin-walled ultrafine grained cylindrical tubes. Materials Letters, 143. pp. 167-171. ISSN 0167-577X

Abdul Ghani, S. and Lee, Y.F. (2015) Exploring the perception of lifestyle housing development in Malaysia. In: The Asia Pacific Network for Housing Research (APNHR) 2015., 09 - 12 April 2015, Asia Cultural Complex, Gwangju, South Korea..

Abdul Murad, M.H.S. (2013) Academic Right 101: an introduction in a Malaysian context. Academic Right 101: An Introduction in a Malaysian Context, 55 (2). pp. 105-110.

Abdul Rahim, H. and Ibrahim, F. and Taib, M.N. (2010) System identification of nonlinear autoregressive models in monitoring dengue infection. International Journal on Smart Sensing and Intelligent Systems, 3 (4). pp. 783-806. ISSN 11785608

Abdul Rahim, H. and Ibrahim, F. and Taib, M.N. and Abdul Rahim, R. and Mad Sam, Y. (2008) Monitoring haemoglobin status in dengue patients using ARMAX model. In: International Symposium on Information Technology 2008, ITSim, 2008, Kuala Lumpur.

Abdul Rahim, H. and Taib, M.N. and Ibrahim, F. and Abdul Rahim, Z. (2011) Bioelectrical impedance analysis device: measurement of bioelectrical tissue conductivity in dengue patients. Sensors and Transducers, 125 (2). pp. 256-265. ISSN 17265479 (ISSN)

Abdul Sani, S.F. and Grime, G.W. and Palitsin, V. and Mahdiraji, G.A. and Abdul Rashid, H.A. and Maah, M.J. and Bradley, D.A. (2015) Micro-PIXE analysis of doped SiO2 fibres intended as TL dosimeters for radiation measurements. X-Ray Spectrometry, 44 (2). pp. 33-40. ISSN 0049-8246

Abdul-Kareem, S. and Baba, S. and Wahid, M.I.A. (2000) Research in medical informatics. Health Informatics Journal, 6 (2). pp. 110-115. ISSN 1460-4582

Abdul-Kareem, S. and Baba, S. and Zubairi, Y.Z. and Prasad, U. and Wahid, M.I.A. (2002) Prognostic Systems for NPC: A comparison of the Neural Network Model and The Cox Proportional Hazards Model. Advances in Neural Network World.

Abdul-Kareem, S. and Baba, S. and Zubairi, Y.Z. and Wahid, M.I.A. (2000) ANN as a tool for medical prognosis. Health Informatics Journal, 6 (3). pp. 162-165. ISSN 1460-4582

Abdul-Rahman, - and Wang, C. and Rahim, A.M. and Loo, S.C. and Miswan, N. (2014) Vertical greenery systems (VGS) in urban tropics. Open House International, 39 (4). pp. 42-52.

Abdulalla, S.M. and Kiah, L.M. and Zakaria, O. (2010) A biological model to improve PE malware detection: review. International Journal of Physical Sciences, 5 (15). pp. 2236-2247. ISSN 1992-1950

Abdullah, A. and Mohd, P. (2016) Internet use and e-Health literacy levels among patients attending a hospital based primary care clinic In Malaysia. In: The 4th International Health Literacy Conference 2016, 07 - 09 November 2016, Haiphong City, Vietnam.

Abdullah, N. and Gazelle, G. (2014) Technology and literacy in a synergy: Understanding children techno-literacy for e-book design. In: Fourth Asian Literature and Librarianship, 03-06 April 2014, Osaka, Japan. (Submitted)

Abdullah, Norbani and Elsheikh, Mohamed Hamid and Ibrahim, Nik Muhd Jazli Nik and Said, Suhana Mohd and Sabri, Mohd Faizul Mohd and Masjuki, Haji Hassan and Marlina, Anita (2015) Magnetic, thermal, mesomorphic and thermoelectric properties of mononuclear, dimeric and polymeric iron(II) complexes with conjugated ligands. RSC Advances, 5 (63). pp. 50999-51007. ISSN 2046-2069

Abdullah, S. and Muhammad, A. (2008) The development of entrepreneurship in Malaysia: State-led initiatives. In: ASIALICS International Conference, 2-4 April 2008, Bangalore, India. (Submitted)

Abeyrathna, P.H.A.S. and Zainab, A.N. (2004) The status of reading habit and interests among secondary school children in Sri Lanka. Malaysian Journal of Library & Information Science , 9 (2). pp. 107-121. ISSN 1394-6234

Abidin, M.Z.Z. and Firdaus, A.S. (2016) Cabaran dan pengadaptasian warga emas dalam persekitaran jaringan digital = Challenges and adaptation of older adults in a networked digital environment. Jurnal Komunikasi: Malaysian Journal of Communication, 32 (1). pp. 581-606. ISSN 2289-151X

Abidin, N.I.Z. and Da Forno, A. and Bestetti, M. and Martin, D. and Beer, A. and Atrens, A. (2015) Evaluation of coatings for Mg alloys for biomedical applications. Advanced Engineering Materials, 17 (1). pp. 58-67. ISSN 1438-1656

Abnisa, F. and Daud, W.M.A.W. (2015) Optimization of fuel recovery through the stepwise co-pyrolysis of palm shell and scrap tire. Energy Conversion and Management, 99. pp. 334-345. ISSN 0196-8904

Abo-Hamad, A. and Hayyan, M. and AlSaadi, M.A. and Hashim, M.A. (2015) Potential applications of deep eutectic solvents in nanotechnology. Chemical Engineering Journal, 273. pp. 551-567. ISSN 1385-8947

Abomhara, Mohamed and Khalifa, Othman O. and Zaidan, A.A. and Zaidan, B.B. and Zakaria, Omar and Gani, Abdullah (2011) An experiment of scalable video security solution using H. 264/AVC and advanced encryption standard (AES): selective cryptography. International Journal of the Physical Sciences, 6 (16). pp. 4053-4063. ISSN 1992-1950

Aboodarda, S.J. and Hamid, M.S.A. and Che Muhamed, A.M. and Ibrahim, F. and Thompson, M. (2013) Resultant muscle torque and electromyographic activity during high intensity elastic resistance and free weight exercises. European Journal of Sport Science, 13 (2). pp. 155-163. ISSN 17461391

Aboodarda, S.J. and Muhamed, A.M.C. and Ibrahim, F. and Hamid, M.S.B.A. (2009) Electromyographic activity using elastic resistance and nautilus machine exercises. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.

Aboodarda, S.J. and Shariff, M.A.H. and Muhamed, A.M.C. and Ibrahim, F. and Yusof, A. (2011) Electromyographic activity and applied load during high intensity elastic resistance and nautilus machine exercises. Journal of Human Kinetics, 30 (1). pp. 5-12. ISSN 1640-5544

Aboodarda, S.J. and Yusof, A. and Abu Osman, N.A. and Ibrahim, F. (2011) Two practical strategies for developing resultant muscle torque production using elastic resistance device. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Abramian, M. and Lovell, N.H. and Morley, J.W. and Suaning, G.J. and Dokos, S. (2015) Activation and inhibition of retinal ganglion cells in response to epiretinal electrical stimulation: A computational modelling study. Journal of Neural Engineering, 12 (1). 016002. ISSN 1741-2560

Abramowicz, H. and Abt, I. and Adamczyk, L. and Adamus, M. and Antonelli, S. and Antonioli, P. and Antonov, A. and Arneodo, M. and Aushev, V. and Aushev, Y. and Bachynska, O. and Bamberger, A. and Barakbaev, A.N. and Barbagli, G. and Bari, G. and Barreiro, F. and Bartsch, D. and Basile, M. and Behnke, O. and Behr, J. and Behrens, U. and Bellagamba, L. and Bertolin, A. and Bhadra, S. and Bindi, M. and Blohm, C. and Bold, T. and Boos, E.G. and Borodin, M. and Borras, K. and Boscherini, D. and Bot, D. and Boutle, S.K. and Brock, I. and Brownson, E. and Brugnera, R. and Bruemmer, N. and Bruni, A. and Bruni, G. and Brzozowska, B. and Bussey, P.J. and Butterworth, J.M. and Bylsma, B. and Caldwell, A. and Capua, M. and Carlin, R. and Catterall, C.D. and Chekanov, S. and Chwastowski, J. and Ciborowski, J. and Ciesielski, R. and Cifarelli, L. and Cindolo, F. and Contin, A. and Cooper-Sarkar, A.M. and Coppola, N. and Corradi, M. and Corriveau, F. and Costa, M. and D'Agostini, G. and Dal Corso, F. and de Favereau, J. and del Peso, J. and Dementiev, R.K. and De Pasquale, S. and Derrick, M. and Devenish, R.C.E. and Dobur, D. and Dolgoshein, B.A. and Doyle, A.T. and Drugakov, V. and Durkin, L.S. and Dusini, S. and Eisenberg, Y. and Ermolov, P.F. and Eskreys, A. and Fang, S. and Fazio, S. and Ferrando, J. and Ferrero, M.I. and Figiel, J. and Forrest, M. and Fourletov, S. and Galas, A. and Gallo, E. and Garfagnini, A. and Geiser, A. and Gialas, I. and Gladilin, L.K. and Gladkov, D. and Glasman, C. and Gogota, O. and Golubkov, Y.A. and Goettlicher, P. and Grabowska-Bold, I. and Grebenyuk, J. and Gregor, I. and Grigorescu, G. and Grzelak, G. and Gwenlan, C. and Haas, T. and Hain, W. and Hamatsu, R. and Hart, J.C. and Hartmann, H. and Hartner, G. and Hilger, E. and Hochman, D. and Holm, U. and Hori, R. and Horton, K. and Huettmann, A. and Ibrahim, Z.A. and Iga, Y. and Ingbir, R. and Ishitsuka, M. and Jakob, H.P. and Januschek, F. and Jimenez, M. and Jones, T.W. and Juengst, M. and Kadenko, I. and Kahle, B. and Kamaluddin, B. and Kananov, S. and Kanno, T. and Karshon, U. and Karstens, F. and Katkov, I.I. and Kaur, M. and Kaur, P. and Keramidas, A. and Khein, L.A. and Kim, J.Y. and Kisielewska, D. and Kitamura, S. and Klanner, R. and Klein, U. and Koffeman, E. and Kollar, D. and Kooijman, P. and Korol, I. and Kotanski, A. and Koetz, U. and Kowalski, H. and Kulinski, P. and Kuprash, O. and Kuze, M. and Kuzmin, V.A. and Lee, A. and Levchenko, B.B. and Levy, A. and Libov, V. and Limentani, S. and Ling, T.Y. and Lisovyi, M. and Lohmann, W. and Loehr, B. and Lohrmann, E. and Loizides, J.H. and Long, K.R. and Longhin, A. and Lontkovskyi, D. and Lukasik, J. and Lukina, O.Y. and Luzniak, P. and Maeda, J. and Magill, S. and Makarenko, I. and Malka, J. and Mankel, R. and Margotti, A. and Marini, G. and Martin, J.F. and Mastroberardino, A. and Matsumoto, T. and Mattingly, M.C.K. and Idris, F.M. and Monaco, V. and Montanari, A. and Morris, J.D. and Musgrave, B. and Nagano, K. and Namsoo, T. and Nania, R. and Nicholass, D. and Nigro, A. and Ning, Y. and Noor, U. and Notz, D. and Nowak, R.J. and Oh, B.Y. and Okazaki, N. and Oliver, K. and Olkiewicz, K. and Ota, O. and Papageorgiu, K. and Paul, E. and Pawlak, J.M. and Pawlik, B. and Pelfer, P.G. and Pellegrino, A. and Perlanski, W. and Perrey, H. and Piotrzkowski, K. and Plucinski, P. and Pokrovskiy, N.S. and Polini, A. and Proskuryakov, A.S. and Raval, A. and Reeder, D.D. and Reisert, B. and Ren, Z. and Ri, Y.D. and Robertson, A. and Roloff, P. and Ron, E. and Rubinsky, I. and Ruspa, M. and Sacchi, R. and Salii, A. and Samson, U. and Sartorelli, G. and Savin, A.A. and Saxon, D.H. and Schioppa, M. and Schleper, P. and Schmidke, W.B. and Schonberg, V. and Schwartz, J. and Sciulli, F. and Shcheglova, L.M. and Shehzadi, R. and Shimizu, S. and Singh, I. and Skillicorn, I.O. and Slominski, W. and Smith, W.H. and Sola, V. and Solano, A. and Solomin, A. and Son, D. and Sosnovtsev, V. and Spiridonov, A. and Stadie, H. and Stanco, L. and Stern, A. and Stewart, T.P. and Stifutkin, A. and Stopa, P. and Suchkov, S. and Susinno, G. and Suszycki, L. and Sztuk, J. and Szuba, D. and Szuba, J. and Tapper, A.D. and Tassi, E. and Terron, J. and Theedt, T. and Tiecke, H. and Tokushuku, K. and Tomalak, O. and Tomaszewska, J. and Tsurugai, T. and Turcato, M. and Tymieniecka, T. and Vazquez, M. and Verbytskyi, A. and Viazlo, V. and Vlasov, N.N. and Volynets, O. and Walczak, R. and Abdullah, W.A.T.W. and Whitmore, J.J. and Whyte, J. and Wing, M. and Wlasenko, M. and Wolf, G. and Wolfe, H. and Wrona, K. and Yamada, S. and Yamazaki, Y. and Yoshida, R. and Youngman, C. and Zarnecki, A.F. and Zenaiev, O. and Zhautykov, B.O. and Zhmak, N. and Zhou, C. and Zichichi, A. and Zolko, M. and Zotkin, D.S. and Collaboration, ZEUS (2010) Scaled momentum spectra in deep inelastic scattering at HERA. Journal of High Energy Physics (6).

Abrizah, A. and Noorhidawati, A. and Kiran, K. (2010) Global visibility of Asian universities' open access institutional repositories. Malaysian Journal of Library & Information Science, 15 (3). pp. 53-73. ISSN 1394-6234

Abrizah , A. and Zainab, A.N. (2005) Internet usage and information seeking behaviour of students conducting history projects: Determining the need of a digital library for historical resources. Jurnal Persatuan Pustakawan Malaysia, 1. pp. 1-19.

Abu Bakar, N. and Chee, C.Y. and Abdullah, L.C. and Ratnam, C.T. and Ibrahim, N.A. (2015) Thermal and dynamic mechanical properties of grafted kenaf filled poly (vinyl chloride)/ethylene vinyl acetate composites. Materials & Design, 65. pp. 204-211. ISSN 0261-3069

Abu Bakar, Z. and Zainol, Z. (2010) The design of a DSS for the selection of ERP system and consultant. In: International Symposium on Information Technologies and Applications in Education, 23-25 Nov 2007, Kunming, China.

Acharya, U.R. and Faust, O. and Molinari, F. and Sree, S.V. and Junnarkar, S.P. and Sudarshan, V. (2015) Ultrasound-based tissue characterization and classification of fatty liver disease: A screening and diagnostic paradigm. Knowledge-Based Systems, 75. pp. 66-77. ISSN 0950-7051

Acharya, U.R. and Molinari, F. and Sree, S.V. and Swapna, G. and Saba, L. and Guerriero, S. and Suri, J.S. (2015) Ovarian tissue characterization in ultrasound: A Review. Technology in Cancer Research & Treatment, 14 (3). pp. 251-261. ISSN 1533-0338

Acharya, U.R. and Ng, E.Y.K. and Eugene, L.W.J. and Noronha, K.P. and Min, L.C. and Nayak, K.P. and Bhandary, S.V. (2015) Decision support system for the glaucoma using Gabor transformation. Biomedical Signal Processing and Control, 15. pp. 18-26. ISSN 1746-8094

Acharya, U.R. and Sree, S.V. and Molinari, F. and Saba, L. and Nicolaides, A. and Suri, J.S. (2015) An automated technique for carotid far wall classification using grayscale features and wall thickness variability. Journal of Clinical Ultrasound, 43 (5). pp. 302-311. ISSN 0091-2751

Acharya, U.R. and Sudarshan, V.K. and Adeli, H. and Santhosh, J. and Koh, J.E.W. and Adeli, A. (2015) Computer-aided diagnosis of depression using EEG signals. European Neurology, 73 (5-6). pp. 329-336. ISSN 0014-3022

Acharya, U.R. and Sudarshan, V.K. and Ghista, D.N. and Lim, W.J.E. and Molinari, F. and Sankaranarayanan, M. (2015) Computer-aided diagnosis of diabetic subjects by heart rate variability signals using discrete wavelet transform method. Knowledge-Based Systems, 81. pp. 56-64.

Adib Kadri, N. (2012) The ABCs of XMLs journal publishing for digital age and beyond. In: Asia Pacific Association of Medical Editors Convention 2012, 31 August - 03 Sep 2012, Kuala Lumpur.

Adikan, Faisal Rafiq Mahamd and Ali, N.M. and Mokhtar, Norrima and Mubin, Marizan (2009) Recent Findings Pertaining To Factors Contributing To The Poor Academic Performance Of Undergraduate Students In The Department Of Electrical Engineering, University Of Malaya, Kuala Lumpur, Malaysia. In: International Engineering Education Conference, 16-19 May 2009, Madinah, Saudi Arabia. (Submitted)

Aeinehvand, Mohammad Mahdi and Moebius, Jacob and Harun, Sulaiman Wadi and Abd Rahman, Noorsaadah and Madou, Marc and Ibrahim, Fatimah (2012) The effects of placement and geometry on thermo-pneumatic pumping on centrifugal microfluidic compact disc (CD) platforms. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Afiqah, S. and Mohammad Naqib, H. and Mohd Anuar, R. (2015) Penggunaan teknologi pengesanan halal terhadap produk makanan: Kajian menurut perspektif hukum Islam. In: The 2nd International Convention on Islamic Management 2015, 4-5 November 2015, Academy of Islamic Studies, University of Malaya, Kuala Lumpur.

Afiqah, S. and Mohd Anuar, R. (2015) Isu-isu halal dalam produk berasaskan daging. In: Prosiding Seminar Fiqh Semasa (SeFis)2015, 10 Jun 2015, Dewan Kuliah Utama, Fakulti Pengajian Quran dan Sunnah (FPQS), Universiti Sains Islam Malaysia (USIM).

Afshar Ghotli, R. and Abdul Aziz, A.R. and Ibrahim, S. and Baroutian, S. and Arami-Niya, A. (2013) Study of various curved-blade impeller geometries on power consumption in stirred vessel using response surface methodology. Journal of the Taiwan Institute of Chemical Engineers, 44 (2). pp. 192-201. ISSN 18761070

Afshar Ghotli, R. and Abdul Raman, A.A. and Ibrahim, S. and Baroutian, S. (2013) Liquid-liquid mixing in stirred vessels: a review. Chemical Engineering Communications, 200 (5). pp. 595-627. ISSN 1563-5201

Aghabozorgi, S.R. and Teh, Y.W. (2009) Dynamic modeling by usage data for personalization systems. In: 13th International Conference Information Visualisation, 15-17 July 2009, Barcelona, Spain.

Ahmad, A. and Salim, S.S. and Zainuddin, R. (2008) A cognitive tool to support mathematical communication in fraction word problem solving. WSEAS Transactions on Computers, 7 (4). ISSN 1109-2750

Ahmad, M. and Aziz, A.R.A. (2015) Elemental distribution and porosity enhancement in advanced nano bimetallic catalyst. Powder Technology, 280. pp. 42-52. ISSN 0032-5910

Ahmad, R. and Hin, K.W. (2007) Interactive Software Engineering Learning Environment. In: Research Excellence and Knowledge Enrichment in ICT: Proceeding of the 2nd International Conference on Informatics, 27th - 28th November 2007, Petaling Jaya, Selangor, Malaysia..

Ahmad, Raja Wasim and Gani, Abdullah and Ab Hamid, Siti Hafizah and Xia, Feng and Shiraz, Muhammad (2015) A Review on mobile application energy profiling: Taxonomy, state-of-the-art, and open research issues. Journal of Network and Computer Applications, 58. pp. 42-59. ISSN 1084-8045

Ahmad, Z. and Abdullah, S.M. and Zafar, Q. and Sulaiman, K. (2014) Investigation of charge transport in organic polymer donor/acceptor photovoltaic materials. Journal of Modern Optics, 61 (21, SI). pp. 1730-1734. ISSN 0950-0340

Ahmed, M.A. and Kiah, M.L.M. and Zaidan, B.B. and Zaidan, A.A. (2010) A novel embedding method to increase capacity and robustness of low-bit encoding audio steganography technique using noise gate software logic algorithm. Journal of Applied Sciences, 10 (1). pp. 59-64. ISSN 1812-5654

Ahmed, M.H.M. and Ali, N.M. and Salleh, Z.S. and Rahman, A.A. and Harun, Sulaiman Wadi and Manaf, M. and Arof, Hamzah (2015) Q-switched erbium doped fiber laser based on single and multiple walled carbon nanotubes embedded in polyethylene oxide film as saturable absorber. Optics and Laser Technology, 65. pp. 25-28. ISSN 0030-3992

Ahmed, M.M. and Huda, A.S.N. and Isa, N.A.M. (2015) Recursive construction of output-context fuzzy systems for the condition monitoring of electrical hotspots based on infrared thermography. Engineering Applications of Artificial Intelligence, 39. pp. 120-131. ISSN 0952-1976

Ahmed, S. and Hassan, M. (2002) Action plans for implementation of total productive maintenance. International Journal of Engineering Science & Technology, 2 (1). pp. 51-68.

Ahmed, T. and Mekhilef, S. (2015) Semi-Z-source inverter topology for grid-connected photovoltaic system. IET Power Electronics, 8 (1). pp. 63-75. ISSN 1755-4535

Ahsan, M.R. and Islam, M.T. and Ullah, M.H. (2015) Computational and experimental analysis of high gain antenna for WLAN/WiMAX applications. Journal of Computational Electronics, 14 (2). pp. 634-641. ISSN 1569-8025

Ahsan, M.R. and Islam, M.T. and Ullah, M.H. (2015) A new low-profile inverted A-shaped patch antenna for multi-band operations. Wireless Personal Communications, 81 (2). pp. 519-529. ISSN 0929-6212

Ahsan, M.R. and Islam, M.T. and Ullah, M.H. (2015) A new meandered-stripline fed dual band patch antenna. Applied Computational Electromagnetics Society Journal, 30 (2). pp. 213-221. ISSN 1054-4887

Ahsan, M.R. and Islam, M.T. and Ullah, M.H. and Singh, M.J. and Ali, M.T. (2015) Metasurface reflector (MSR) loading for high performance small microstrip antenna design. PLoS ONE, 10 (5). p. 20. ISSN 1932-6203

Ai-Ling, Y. (2009) Continuous professional development for librarians. Jurnal Persatuan Pustakawan Malaysia, 3. pp. 1-12.

Ainin, S. and Kamarulzaman, Y. and Farinda, A.G. (2010) An assessment of technological competencies on professional service firms business performance. In: International Conference on Education and Information Technologies, 28-30 Jun 2010, Paris,France.

Aishah, A.B. (2015) Reinstating the soul in engineering laboratory work: Direct observation assessment method. In: International Conference on Engineering Education and Research 2015, 19-21 December 2015, Madinah, Kingdom of Saudi Arabia.

Ajeel, M.A. and Aroua, M.K. and Daud, W.M.A.W. (2015) P-Benzoquinone anodic degradation by carbon black diamond composite electrodes. Electrochimica Acta, 169. pp. 46-51. ISSN 0013-4686

Ajeel, M.A. and Aroua, M.K. and Daud, W.M.A.W. (2015) Preparation and characterization of carbon black diamond composite electrodes for anodic degradation of phenol. Electrochimica Acta, 153. pp. 379-384. ISSN 0013-4686

Akbari, V. and Borhani, T.N.G. and Shamiri, A. and Aramesh, R. and Hussain, M.A. and Abd Hamid, M.K. (2015) 2D CFD-PBM simulation of hydrodynamic and particle growth in an industrial gas phase fluidized bed polymerization reactor. Chemical Engineering Research & Design, 104. pp. 53-67. ISSN 0263-8762

Akter, M.P. and Mekhilef, S. and Tan, N.M.L. and Akagi, H. (2015) Model predictive control of bidirectional AC-DC converter for energy storage system. Journal of Electrical Engineering & Technology, 10 (1). pp. 165-175. ISSN 1975-0102

Akter, M.P. and Mekhilef, S. and Tan, N.M.L. and Akagi, H. (2015) Stability and performance investigations of model predictive controlled active-front-end (AFE) rectifiers for energy storage systems. Journal of Power Electronics, 15 (1). pp. 202-215. ISSN 1598-2092

Akter, P. and Uddin, M. and Mekhilef, S. and Tan, N.M.L. and Akagi, H. (2015) Model predictive control of bidirectional isolated DC–DC converter for energy conversion system. International Journal of Electronics, 102 (8). pp. 1407-1427. ISSN 1362-3060

Al Mahmud, K.A.H. and Kalam, M.A. and Masjuki, Haji Hassan and Mobarak, H.M. and Zulkifli, N.W.M. (2015) An updated overview of diamond-like carbon coating in tribology. Critical Reviews in Solid State and Materials Sciences, 40 (2). pp. 90-118. ISSN 1040-8436

Al Mamun, A. and Ahmed, Y.M. and AlKhatib, M.F.R. and Jameel, A.T. and AlSaadit, M. (2015) Lead sorption by carbon nanofibers grown on powdered activated carbon - kinetics and equilibrium. Nano, 10 (2). p. 8. ISSN 1793-2920

Al-Bakri, S.H. and Mat Kiah, M.L. (2010) A novel peer-to-peer SMS security solution using a hybrid technique of NTRU and AES-Rijndael. Scientific Research and Essays, 5 (22). pp. 3455-3466. ISSN 1992-2248

Al-Bakri, S.H. and Mat Kiah, M.L. and Zaidan, A.A. and Zaidan, B.B. and Alam, G.M. (2011) Securing peer-to-peer mobile communications using public key cryptography: New security strategy. International Journal of the Physical Sciences, 6 (4). pp. 930-938. ISSN 1992-1950

Al-Faqheri, W. and Ibrahim, F. and Thio, T.H.G. and Arof, Hamzah and Madou, M. (2013) Novel liquid equilibrium valving on centrifugal microfluidic CD platform. In: 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2013, 2013, Osaka.

Al-Faqheri, W. and Ibrahim, Fatimah and Thio, T.H.G. and Aeinehvand, M.M. and Arof, Hamzah and Madou, M. (2015) Development of novel passive check valves for the microfluidic CD platfor. Sensors and Actuators a-Physical, 222. pp. 245-254. ISSN 0924-4247

Al-Faqheri, W. and Ibrahim, Fatimah and Thio, T.H.G. and Bahari, N. and Arof, Hamzah and Rothan, Hussin A. and Yusof, Rohana and Madou, M. (2015) Development of a passive liquid valve (PLV) utilizing a pressure equilibrium phenomenon on the centrifugal microfluidic platform. Sensors, 15 (3). pp. 4658-4676. ISSN 1424-8220

Al-Faqheri, Wisam and Ibrahim, Fatimah and Thio, Tzer Hwai Gilbert and Moebius, Jacob and Joseph, Karunan and Arof, Hamzah and Madou, Marc (2013) Vacuum/Compression Valving (VCV) using parrafin-wax on a centrifugal microfluidic CD platform. PLoS ONE, 8 (3). e58523. ISSN 1932-6203

Al-Frajat, A.K. and Jalab, H.A. and Kasirun, Z.M. and Zaidan, A.A. and Zaidan, B.B. (2010) Hiding data in video file: an overview. Journal of Applied Sciences, 10 (15). pp. 1644-1649. ISSN 1812-5654

Al-Hamadani, Y.A.J. and Chu, K.H. and Son, A. and Heo, J. and Her, N. and Jang, Min and Park, C.M. and Yoon, Y. (2015) Stabilization and dispersion of carbon nanomaterials in aqueous solutions: A review. Separation and Purification Technology, 156 (2). pp. 861-874. ISSN 1383-5866

Al-Qazwini, Yusser and Noor, A.S.M. and Yaacob, M.H. and Harun, Sulaiman Wadi and Mahdi, M.A. (2015) Experimental realization and performance evaluation of refractive index SPR sensor based on unmasked short tapered multimode-fiber operating in aqueous environments. Sensors and Actuators A Physical, 236. pp. 38-43. ISSN 0924-4247

Al-Saeedi, S. and Sarhan, A.A.D. and Bushroa, A.R. (2015) Investigating the surface tribology of roller-burnished polymer using the fuzzy rule-based approach. Tribology Transactions, 58 (2). pp. 240-246. ISSN 1040-2004

Alam, G.M. and Mat Kiah, M.L. and Zaidan, B.B. and Zaidan, A.A. and Alanazi, H.O. (2010) Using the features of mosaic image and AES cryptosystem to implement an extremely high rate and high secure data hidden: analytical study. Scientific Research and Essays, 5 (21). pp. 3254-3260. ISSN 1992-2248

Alam, G.M. and Oloruntegbe, O.K. and Oluwatelure, A.T. and Alake, E.M. and Ayeni, A.E. (2010) Is 3D just an addition of 1 to 2 or is it more enhancing than 2D visualizations? Scientific Research and Essays, 5 (12). pp. 1536-1539. (In Press)

Alam, M.A. and Jumaat, M.Z. (2015) Prevention of debonding failure of intermediate anchor to eliminate premature shear failure of flexurally strengthened reinforced concrete beams. Arabian Journal for Science and Engineering, 40 (8). pp. 2219-2232. ISSN 1319-8025

Alam, M.G.R. and Haw, R. and Kim, S.S. and Azad, A.K. and Abedin, S.F. and Hong, C.S. (2016) EM-Psychiatry: An Ambient Intelligent System for Psychiatric Emergency. IEEE Transactions on Industrial Informatics, 12 (6). pp. 2321-2330. ISSN 1551-3203

Alamolhoda, F. and Shamiri, A. and Hussain, M.A. and Sotudeh-Gharebagh, R. and Mostoufi, N. (2015) Early detection of agglomeration in a polyethylene fluidized bed at high temperature and pressure by vibration signature analysis. Chemical Engineering Research & Design, 104. pp. 156-163. ISSN 0263-8762

Alanazi, H. and Noor, R.M. and Zaidan, B.B. and Zaidan, A.A. (2010) Intrusion detection system: overview. Journal of Computing, 2 (2). pp. 130-133. ISSN 2151-9617

Alanazi, H.O. and Mat Kiah, M.L. and Zaidan, A.A. and Zaidan, B.B. and Alam, G.M. (2010) Secure topology for electronic medical record transmissions. International Journal of Pharmacology, 6 (6). pp. 954-958. ISSN 1811-7775

Alanazi, H.O. and Noor, R.M. (2010) The guide of implementing chat protocol: study case on using the socket programming concept and object-oriented programming. Journal of Computing, 2 (10). pp. 18-26. ISSN 2151-9617

Alavi, S.M.A. and Safaei, M.R. and Mahian, O. and Goodarzi, M. and Yarmand, H. and Dahari, M. and Wongwises, S. (2015) A hybrid finite-element/finite-difference scheme for solving the 3-D energy equation in transient nonisothermal fluid flow over a staggered tube bank. Numerical Heat Transfer Part B-Fundamentals, 68 (2). pp. 169-183. ISSN 1040-7790

Alawiah, A. and Alina, M.S. and Bauk, S. and Abdul-Rashid, H.A. and Gieszczyk, W. and Noramaliza, M.N. and Mandiraji, G.A. and Tamchek, N. and Zulkifli, M.I. and Bradley, D.A. and Marashdeh, M.W. (2015) The thermoluminescence characteristics and the glow curves of Thulium doped silica fiber exposed to 10 MV photon and 21 MeV electron radiation. Applied Radiation and Isotopes, 98. pp. 80-86. ISSN 0969-8043

Alawiah, A. and Bauk, S. and Abdul-Rashid, H.A. and Gieszczyk, W. and Hashim, S. and Mandiraji, G.A. and Tamchek, N. and Bradley, D.A. (2015) Potential application of pure silica optical flat fibers for radiation therapy dosimetry. Radiation Physics and Chemistry, 106. pp. 73-76. ISSN 0969-806X

Alawiah, A. and Bauk, S. and Marashdeh, M.W. and Ng, K.S. and Abdul-Rashid, H.A. and Yusoff, Z. and Gieszczyk, W. and Noramaliza, M.N. and Mahdiraji, G.A. and Tamchek, N. and Muhd-Yassin, S.Z. and Mat-Sharif, K.A. and Zulkifli, M.I. and Maah, M.J. and Omar, S.S.C. and Bradley, D.A. (2015) Thermoluminescence glow curves and deconvoluted glow peaks of Ge doped flat fibers at ultra-high doses of electron radiation. Radiation Physics and Chemistry, 113. pp. 53-58. ISSN 0969-806X

Albatsh, F.M. and Ahmad, S. and Mekhilef, S. and Mokhlis, H. and Hassan, M.A. (2015) Optimal placement of unified power flow controllers to improve dynamic voltage stability using power system variable based voltage stability indices. PLoS ONE, 10 (4). p. 32. ISSN 1932-6203

Ale Ebrahim, N. (2013) Introduction to the research tools mind map. Research World, 10 (4). pp. 1-3. ISSN 0974-2379

Ale Ebrahim, N. (2012) Virtual R&D teams definition. Nader Ale Ebrahim's White Papers, 1 (1). pp. 1-2.

Ale Ebrahim, N. (2015) Virtual R&D teams: A new model for product development. International Journal of Innovation, 3 (2). pp. 1-27. ISSN 2318-9975

Ale Ebrahim, N. and Abdul Rashid, S.H. and Ahmed, S. and Taha, Z. (2011) The effectiveness of virtual R&D teams in SMEs: experiences of Malaysian SMEs. Industrial Engineering and Management Systems, 10 (2). pp. 109-114. ISSN 1598-7248

Ale Ebrahim, N. and Ahmed, S. and Abdul Rashid, S.H. and Taha, Z. (2012) Effective virtual teams for new product development. Scientific Research and Essays, 7 (21). pp. 1971-1985. ISSN 1992-2248

Ale Ebrahim, N. and Ahmed, S. and Abdul Rashid, S.H. and Taha, Z. (2012) Technology use in the virtual R&D teams. American Journal of Engineering and Applied Sciences, 5 (1). pp. 9-14. ISSN 1793-8244

Ale Ebrahim, N. and Ahmed, S. and Abdul Rashid, S.H. and Taha, Z. (2011) Virtual collaborative R&D teams in Malaysia manufacturing SMEs. In: 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011), February 26-28, Hotel Royal, Singapore.

Ale Ebrahim, N. and Ahmed, S. and Abdul Rashid, S.H. and Taha, Z. and Mohammadjafari, M. (2012) Process construct in the virtual R&D teams. Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2012. pp. 1822-1828.

Ale Ebrahim, N. and Ahmed, S. and Abdul Rashid, S.H. and Taha, Zahari (2010) Virtual R&D teams: a potential growth of education-industry collaboration. In: 2nd International Congress on Engineering Education (ICEED 2010), 8th - 9th December, Sunway Resort Hotel & Spa, Kuala Lumpur, Malaysia.

Ale Ebrahim, N. and Ahmed, S. and Abdul Rashid, S.H. and Taha , Z. (2010) Virtual teams: a new opportunity to develop a business. In: International Conference on Entrepreneurship Across Boundaries, 5 - 6 AUGUST, Section For Co-curricular Courses, External Faculty Electives and TITAS, University of Malaya, Kuala Lumpur, Malaysia.

Ale Ebrahim, N. and Ahmed, S. and Taha, Z. (2010) Critical factors for new product developments in SMEs virtual team. African Journal of Business Management, 4 (11). pp. 2247-2257. ISSN 1993-8233

Ale Ebrahim, N. and Ahmed, S. and Taha, Z. (2010) Virtual R&D teams and SMEs growth: A comparative study between Iranian and Malaysian SMEs. African Journal of Business Management, 4 (11). pp. 2368-2379. ISSN 1993-8233

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2010) Benefits and pitfalls of virtual R&D teams: an empirical study. In: 6th International Communication & Information Technology Management Conference (ICTM 2010) , February. 23-24, Tehran, Iran.

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2008) Concurrent collaboration in research and development. In: National Conference on Design and Concurrent Engineering (DECON) 2008, 28-29 October 2008, Melaka, Malaysia.

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2008) Dealing with virtual R&D teams in new product development. In: The 9th Asia Pacific Industrial Engineering & Management Systems Conference and the 11th Asia Pacific Regional Meeting of the International Foundation for Production Research, 3 - 5 December, Nusa Dua, Bali - Indonesia.

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2010) Envisages of new product developments in small and medium enterprises through virtual team. In: International Conference on Industrial Engineering and Operations Management (IEOM2010) , January 9-10, Dhaka, Bangladesh.

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) Innovation and R&D activities in virtual team. European Journal of Scientific Research, 34 (3). pp. 297-307. ISSN 1450-216X

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2008) Literature, principle and the basics of network value creation in R&D: the relationship with economy. In: Seventh conference of Industries and Mines R&D Centers- R&D and Network Value Creation, 29-30 June, IRIB Int'l. Conference Center, Tehran, Iran.

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) Modified stage-gate: a conceptual model of virtual product development process. African Journal of Marketing Management, 1 (9). pp. 211-219. ISSN 1993-8233

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2008) New product development in virtual environment. In: 2008 International Conference on Technology Management and Innovation in China: Challenges and Opportunities in the 21st Century, 21st – 23rd October, UIBE, Beijing, China.

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2008) R&D networking and value creation in SMEs. In: Seventh conference of Industries and Mines R&D Centers- R&D and Network Value Creation, 29-30 June, IRIB Int'l. Conference Center, Tehran, Iran.

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) SMEs and virtual R&D teams: a motive channel for relationship between SMEs. In: The International Conference for Technical Postgraduates (TECHPOS 2009), 14-15 December, The Legend Hotel, Kuala Lumpur, Malaysia.

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2010) SMEs, virtual research and development (R&D) teams and new product development: a literature review. International Journal of the Physical Sciences, 5 (7). pp. 916-930. ISSN 1992-1950

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) SMEs: ERP or virtual collaboration teams. In: First Enterprise Resource Planning conference, January 27-28, Tehran, Iran.

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2008) Virtual R&D Teams for NPD in SMEs: Past, Present and Future Trend. In: APCMOTTE2008 (Asia pacific Conference on Management of Technology and Technology Entrepreneurship) , 29-30 October, Melaka, Malaysia.

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) Virtual R&D teams in small and medium enterprises: a literature review. Scientific Research and Essays, 4 (13). pp. 1575-1590. ISSN 1992-2248

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2008) Virtual R&D teams: a sustainable infrastructure for promoting SMEs. In: 2nd Engineering Conference (EnCon 2008), 18-19 December, Crowne Plaza Riverside Hotel, Kuching, Sarawak, Malaysia.

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) Virtual R&D teams: innovation and technology facilitator. In: Engineering Education in 2025, 11-12 May, School of Engineering and Technology, University of Tehran, Tehran, Iran.

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2008) Virtual environments innovation and R&D activities: management challenges. In: Proceedings of the International Graduate on Engineering and Science (IGCES'08), 23 - 24 December, Universiti Teknologi Malaysia, Johor Bahru, Malaysia.

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) Virtual teams and management challenges. In: 1st Executive MBA Conference, 18-19, May, Tehran, Iran.

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) Virtual teams for NPD – an innovative experience for R&D engineers. In: International Conference on Advances in Mechanical Engineering, 24-25, June, Concorde Hotel, Shah Alam, Malaysia.

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) Virtual teams for new product development – an innovative experience for R&D engineers. European Journal of Educational Studies, 1 (3). pp. 109-123. ISSN 19446-6331

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) Virtual teams: a literature review. Australian Journal of Basic and Applied Sciences, 3 (3). pp. 2653-2669. ISSN 1991-8178

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) Virtuality, innovation and R&D activities. In: 14th International Conference on Thinking (2009 Malaysia) -Theme "Thinking Minds: Nurturing the Design of a Better Future", 22-26 June, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia.

Ale Ebrahim, N. and Ahmed, S. and Taha , Z. (2009) A conceptual model of virtual product development process. In: 2nd Seminar on Engineering and Information Technology, (SEIT 2009), 8th - 9th July, Universiti Malaysia Sabah, Kota Kinabalu, Sabah, Malaysia.

Ale Ebrahim, N. and Ebrahimian, H. and Mousavi, M. and Tahriri, F. (2015) Does a long reference list guarantee more citations? Analysis of Malaysian highly cited and review papers. [Dataset]

Alengaram, U.J. and Mohottige, H.W.N. and Wu, C.Q. and Jumaat, M.Z. and Yap, S.P. and Wang, Z.Q. (2016) Ductile behaviour of oil palm shell concrete slabs subjected to blast loads. In: Proceedings of the 4th International Conference on Protective Structures, 18 - 21 October 2016, Beijing, China.

Alhalawani, A.M.F. and Rodriguez, O. and Curran, D.J. and Co, R. and Kieran, S. and Arshad, S. and Keenan, T.J. and Wren, A.W. and Crasto, G. and Peel, S.A.F. and Towler, M.R. (2015) A glass polyalkenoate cement carrier for bone morphogenetic proteins. Journal of Materials Science-Materials in Medicine, 26 (3). p. 151. ISSN 0957-4530

Ali, A.S. and Au-Yong, C.P. and Ling, S.C. (2014) Managing refurbishment projects through selection of procurement system: The case of Malaysia. In: Proceedings of the 2nd International Conference on Sustainable Development, 26-27 Sep 2014, Rome, Italy.

Ali, Azlan-Shah (2010) Design information in managing refurbishment projects in Malaysia. International Journal of the Physical Sciences, 5 (6). pp. 768-773.

Ali, B.S. and Kasirun, Z.M. (2008) Crosscutting concern identification at requirements level. Malaysian Journal of Computer Science, 21 (2). pp. 78-87. ISSN 0127-9084

Ali, B.S. and Kasirun, Z.M.D. (2011) An approach for crosscutting concern identification at requirements level using NLP. International Journal of the Physical Sciences, 6 (11). pp. 2718-2730.

Ali, J.M. and Hoang, N.H. and Hussain, M.A. and Dochain, D. (2015) Review and classification of recent observers applied in chemical process systems. Computers & Chemical Engineering, 76. pp. 27-41. ISSN 0098-1354

Ali, J.M. and Hussain, M.A. and Tade, M.O. and Zhang, J. (2015) Artificial intelligence techniques applied as estimator in chemical process systems - A literature survey. Expert Systems with Applications, 42 (14). pp. 5915-5931. ISSN 0957-4174

Ali, S. and Abu Osman, N.A. and Eshraghi, A. and Gholizadeh, H. and Abd Razak, N.A.B. and Wan Abas, W.A.B. (2013) Interface pressure in transtibial socket during ascent and descent on stairs and its effect on patient satisfaction. Clinical Biomechanics, 28 (9-10). pp. 994-999. ISSN 02680033

Ali, S. and Abu Osman, N.A. and Mortaza, N. and Eshraghi, A. and Gholizadeh, H. and Wan Abas, W.A.B. (2012) Clinical investigation of the interface pressure in the trans-tibial socket with Dermo and Seal-In X5 liner during walking and their effect on patient satisfaction. Clinical Biomechanics, 27 (9). pp. 943-948. ISSN 0268-0033

Alibeigi, A. and Asemi, A. and Munir, A.B. and Obaidellah, U.H. (2014) Adequacy assessment of time of dispatch rules using fuzzy TOPSIS method. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.

Alibeigi, A. and Munir, A.B. (2016) Electronic contracts, the Malaysian perspective. In: 10th International Conference on E-Commerce with Focusing on e-Tourism (ECDC), 15-16 April 2016, Isfahan, Iran.

Alicia Tang, Y. and Zain, S. and Abdul Rahman, N. and Abdullah, R. (2007) An ontology-based reasoning framework for reaction mechanisms simulation. Knowledge Science, Engineering and Management. pp. 18-29.

Alsubari, B. and Shafigh, P. and Jumaat, M.Z. (2015) Development of self-consolidating high strength concrete incorporating treated palm oil fuel ash. Materials, 8 (5). pp. 2154-2173. ISSN 1996-1944

Ambran, S. and Holmes, C. and Gates, J.C. and Webb, A.S. and Adikan, Faisal Rafiq Mahamd and Smith, P.G.R. and Sahu, J.K. (2010) Micromachined multimode interference device in flat-fiber. In: Photonics Global Conference 2010, 14-16 Dec 2010, Singapore.

Amini, H. and Dabbagh, V. and Rezaei, S.M. and Zareinejad, M. and Mardi, N.A. and Sarhan, A.A.D. (2015) Robust control-based linear bilateral teleoperation system without force sensor. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 37 (2). pp. 579-587. ISSN 1678-5878

Amini, H. and Rezaei, S.M. and Sarhan, A.A.D. and Akbari, J. and Mardi, N.A. (2015) Transparency improvement by external force estimation in a time-delayed nonlinear bilateral teleoperation system. Journal of Dynamic Systems Measurement and Control-Transactions of the Asme, 137 (5). p. 15. ISSN 0022-0434

Amir, Z. and Jan, B.M. and Khalil, M. and Wahab, A.K.A. and Hassan, Z. (2015) Rheological behavior and temperature dependency study of Sara line-based super lightweight completion fluid. Journal of Petroleum Science and Engineering, 130. pp. 106-113. ISSN 0920-4105

Amiri, A. and Ahmadi, G. and Shanbedi, M. and Savari, M. and Kazi, S.N and Chew, B.T (2015) Microwave-Assisted Synthesis of Highly-Crumpled, Few-Layered Graphene and Nitrogen-Doped Graphene for Use as High-Performance Electrodes in Capacitive Deionization. Scientific Reports, 5. ISSN 2045-2322

Amiri, A. and Sadri, R. and Ahmadi, G. and Chew, B.T. and Kazi, S.N. and Shanbedi, M. and Alehashem, M.S. (2015) Synthesis of polyethylene glycol-functionalized multi-walled carbon nanotubes with a microwave-assisted approach for improved heat dissipation. RSC Advances, 5 (45). pp. 35425-35434. ISSN 2046-2069

Amiri, A. and Sadri, R. and Shanbedi, M. and Ahmadi, G. and Chew, B.T. and Kazi, S.N. and Dahari, M. (2015) Performance dependence of thermosyphon on the functionalization approaches: An experimental study on thermo-physical properties of graphene nanoplatelet-based water nanofluids. Energy Conversion and Management, 92. pp. 322-330. ISSN 0196-8904

Anari, N. and Saboohi, H. and Ahakian, G. (2014) A comparative study of testing semantic web services. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.

Andrews, S. and Palaniappan, R. and Teoh, A. and Chu Kiong, L. (2008) Enhancing P300 component by spectral power ratio principal components for a single trial brain-computer interface. American Journal of Applied Sciences, 5 (6). pp. 639-644. ISSN 1546-9239

Ang, B.C. and Yaacob, I.I. and Wong, Y.H. (2014) Phase and surface area studies of maghemite nanoparticles dispersed in silica gel. Materials Research Innovations, 18 (S6). S6-32-S6-35. ISSN 1432-8917

Ang, T. and Tan, A.W. and Loo, C. and Wong, W. (2012) Wavelet mach filter for omnidirectional human activity recognition. International Journal of Innovative Computing, Information and Control, 8 (5). pp. 3565-3584. ISSN 1349-4198

Ang, T.F. and Ling, T.C. and Phang, K.K. and Por, L.Y. (2009) Automatic web services deployment. In: World Congress on Computer Science and Information Engineering, 31 Mar - 2 Apr 2009, Los Angeles, USA. (Submitted)

Anisur, M.R. and Kibria, M.A. and Mahfuz, M.H. and Saidur, R. and Metselaar, I.H.S.C. (2014) Cooling of air using heptadecane phase change material in shell and tube arrangement: Analytical and experimental study. Energy and Buildings, 85. pp. 98-106.

Annuar, M.S.M. and Tan, I.K.P. and Ibrahim, S. and Ramachandran, K.B. (2006) Ammonium uptake and growth kinetics of pseudomonas putida PGA1. Asia-Pacific Journal of Molecular Biology and Biotechnology, 14 (1). pp. 1-10. ISSN 01287451 (ISSN)

Annuar, M.S.M. and Tan, I.K.P. and Ibrahim, S. and Ramachandran, K.B. (2008) A kinetic model for growth and biosynthesis of medium-chain-length poly-(3-hydroxyalkanoates) in Pseudomonas putida. Brazilian Journal of Chemical Engineering, 25 (2). pp. 217-228. ISSN 0104-6632

Annuar, N.Z.M. and Sabri, M.F.M. and Abu Bakar, A.S. (2015) Modeling and simulation of metal organic halide vapor phase epitaxy (MOHVPE) growth chamber. Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems, 21 (1). pp. 309-318. ISSN 0946-7076

Anuar, N.B. and Azlan, I.M. and Wahid, A.W.A. and Zakaria, O. (2008) SANAsms: Secure short messaging system for secure GSM mobile communication. In: European Conference on Information Warfare and Security, 30 Jun-1 Julai 2008, University of Plymouth, UK. (Submitted)

Anuar, N.B. and Kuen, L.N. and Zakaria, O. and Gani, Abdullah and Wahab, A.W.A. (2008) GSM mobile SMS/MMS using public key infrastructure: m-PKI. WSEAS Transactions on Computers, 7 (8). pp. 1219-1229. ISSN 1109-2750

Anuar, N.B. and Kuen, L.N. and Zakaria, O. and Gani, Abdullah and Wahab, A.W.A. (2009) Usability and performance of secure mobile messaging: M-PKI. WSEAS Transactions on Information Science and Applications, 6 (2). pp. 179-189. ISSN 1790-0832

Anuar, N.B. and Sallehudin, H. and Gani, Abdullah and Zakari, O. (2008) Identifying false alarm for network intrusion detection system using hybrid data mining and decision tree. Malaysian Journal of Computer Science, 21 (2). pp. 101-115. ISSN 0127-9084

Aprianti, E. and Shafigh, P. and Bahri, S. and Farahani, J.N. (2015) Supplementary cementitious materials origin from agricultural wastes - A review. Construction and Building Materials, 74. pp. 176-187. ISSN 0950-0618

Arafat, M.M. and Haseeb, A.S. Md. Abdul and Akbar, S.A. (2015) Growth and characterization of the oxide scales and core/shell nanowires on Ti-6Al-4 V particles during thermal oxidation. Ceramics International, 41 (3). pp. 4401-4409. ISSN 0272-8842

Arbab, M.I. and Varman, M. and Masjuki, Haji Hassan and Kalam, M.A. and Imtenan, S. and Sajjad, H. and Fattah, I.M.R. (2015) Evaluation of combustion, performance, and emissions of optimum palm-coconut blend in turbocharged and non-turbocharged conditions of a diesel engine. Energy Conversion and Management, 90. pp. 111-120. ISSN 0196-8904

Ardi, M.S. and Aroua, M.K. and Hashim, N.A. (2015) Progress, prospect and challenges in glycerol purification process: A review. Renewable & Sustainable Energy Reviews, 42. pp. 1164-1173. ISSN 1364-0321

Arifin, A. and Sun, L.C. (2007) Issues of Establishing GeRaNIUM Grid Portal in the GeRaNIUM Project. In: Research Excellence and Knowledge Enrichment in ICT: Proceeding of the 2nd International Conference on Informatics, 27th - 28th November 2007, Petaling Jaya, Selangor, Malaysia..

Arifin, N. and Abu Osman, Noor Azuan and Ali, S. and Gholizadeh, H. and Wan Abas, Wan Abu Bakar (2015) Evaluation of postural steadiness in below-knee amputees when wearing different prosthetic feet during various sensory conditions using the biodex (R) stability system. Proceedings of the Institution of Mechanical Engineers Part H-Journal of Engineering in Medicine, 229 (7). pp. 491-498. ISSN 0954-4119

Aris, H. and Salim, S.S. (2011) Framework for component model selection. Let Software, 5 (5). pp. 474-486. ISSN 1751-8806

Aris, H. and Salim, S.S. (2008) Issues on the application of component-oriented software development: formulation of research areas. Information Technology Journal, 7 (8). pp. 1149-1155. ISSN 1812-5638

Aris, H. and Salim, S.S. (2011) Properties for component model: the definition perspective. Computing and Informatics, 30 (5). pp. 987-1010. ISSN 1335-9150

Aris, H. and Salim, S.S. (2007) The development of a simplified process model for CBSD. The International Arab Journal of Information Technology, 4 (2). pp. 89-96.

Ariyapala, P.G. and Edzan, N.N. (2002) Foreign postgraduate students and the online catalogue at the University of Malaya library. Malaysian Journal of Library & Information Science, 7 (1). pp. 57-67.

Arumugam, M.S. and Murthy, G.R. and Loo, C.K. (2009) On the optimal control of the steel annealing processes as a two-stage hybrid systems via PSO algorithms. International Journal of Bio-Inspired Computation, 1 (3). pp. 198-209. ISSN 1758-0366

Asadieraghi, M. and Daud, W.M.A.W. (2015) In-situ catalytic upgrading of biomass pyrolysis vapor: Co-feeding with methanol in a multi-zone fixed bed reactor. Energy Conversion and Management, 92. pp. 448-458. ISSN 0196-8904

Asemi, A. and Baba, M.S. and Asemi, A. and Haji Abdullah, R. and Idris, N. (2014) Fuzzy multi criteria decision making applications: a review study. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.

Asghar, A. and Abdul Raman, A.A. and Daud, W.M.A.W. (2015) Advanced oxidation processes for in-situ production of hydrogen peroxide/hydroxyl radical for textile wastewater treatment: A review. Journal of Cleaner Production, 87. pp. 826-838. ISSN 0959-6526

Asghar, A. and Abdul Raman, A.A. and Daud, W.M.A.W. (2015) Challenges and recommendations for using membranes in wastewater-based microbial fuel cells for in situ Fenton oxidation for textile wastewater treatment. Reviews in Chemical Engineering, 31 (1). pp. 45-67. ISSN 0167-8299

Ashik, U.P.M. and Daud, W.M.A.W. (2015) Nanonickel catalyst reinforced with silicate for methane decomposition to produce hydrogen and nanocarbon: Synthesis by co-precipitation cum modified Stober method. RSC Advances, 5 (58). pp. 46735-46748. ISSN 2046-2069

Ashik, U.P.M. and Daud, W.M.A.W. and Abbas, H.F. (2015) Production of greenhouse gas free hydrogen by thermocatalytic decomposition of methane – A review. Renewable and Sustainable Energy Reviews, 44. pp. 221-256. ISSN 1364-0321

Askari, E. and Mehrali, M. and Metselaar, I.H.S.C. and Kadri, N.A. and Rahman, M.M. (2012) Fabrication and mechanical properties of Al2O3/SiC/ZrO2 functionally graded material by electrophoretic deposition. Journal of the Mechanical Behavior of Biomedical Materials, 12. pp. 144-150. ISSN 1751-6161

Askari, E. and Mehrali, M. and Metselaar, I.H.S.C. and Kadri, N.A. and Rahman, M.M. (2012) Fabrication and mechanical properties of functionally graded material by electrophoretic deposition. Journal of the Mechanical Behavior of Biomedical Materials, 12. pp. 144-150. ISSN 1751-6161

Aslam, M. and Shafigh, P. and Jumaat, M.Z. and Shah, S.N.R. (2015) Strengthening of RC beams using prestressed fiber reinforced polymers - A review. Construction and Building Materials, 82. pp. 235-256. ISSN 0950-0618

Atabani, A.E. and Badruddin, I.A. and Masjuki, Haji Hassan and Chong, W.T. and Lee, K.T. (2015) Pangium edule reinw: A promising non-edible oil feedstock for biodiesel production. Arabian Journal for Science and Engineering, 40 (2). pp. 583-594. ISSN 1319-8025

Atabani, A.E. and Badruddin, I.A. and Mekhilef, S. and Silitonga, A.S. (2011) A review on global fuel economy standards, labels and technologies in the transportation sector. Renewable & Sustainable Energy Reviews, 15 (9). pp. 4586-4610.

Ataollahi, F. and Mohri, M. and Seifi, H.A. and Pingguan-Murphy, B. and Wan Abas, W.A.B. and Abu Osman, N.A. (2013) Evaluation of copper concentration in subclinical cases of white muscle disease and its relationship with cardiac troponin I. PLoS ONE, 8 (2). pp. 1-5. ISSN 19326203

Ataollahi, F. and Pramanik, S. and Moradi, A. and Dalilottojari, A. and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar and Abu Osman, Noor Azuan (2015) Endothelial cell responses in terms of adhesion, proliferation, and morphology to stiffness of polydimethylsiloxane elastomer substrates. Journal of Biomedical Materials Research Part A, 103 (7). pp. 2203-2213. ISSN 1549-3296

Attia, H. and Sagafinia, A. (2016) Novel Discrete Components Based Speed Controller for Induction Motor. International Journal of Power Electronics and Drive Systems (IJPEDS), 7 (4). p. 1075. ISSN 2088-8694

Ayodele, O.B. and Farouk, H.U. and Mohammed, J. and Uemura, Y. and Daud, W.M.A.W. (2015) Effect of precursor acidity on zeolite supported Pd catalyst properties and hydrodeoxygenation activity for the production of biofuel. Journal of Molecular Catalysis a-Chemical, 400. pp. 179-186. ISSN 1381-1169

Ayodele, O.B. and Farouk, H.U. and Mohammed, J. and Uemura, Y. and Daud, W.M.A.W. (2015) Hydrodeoxygenation of oleic acid into n- and iso-paraffin biofuel using zeolite supported fiuoro-oxalate modified molybdenum catalyst: Kinetics study. Journal of the Taiwan Institute of Chemical Engineers, 50. pp. 142-152. ISSN 1876-1070

Ayusoff, N. and Soin, N. and Abd Rahman, N. and Raja Abd Rahman, R.N.Z. and Abd Kahar, M.K.B. and Ibrahim, F. (2009) Binding characteristics study for dengue virus non-structural protein 1 of antigen and Its antibody by using circular dichroism technique. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.

Azari, P. and Luan, N.S. and Gan, S.N. and Yahya, R. and Wong, C.S. and Chua, K.H. and Pingguan-Murphy, B. (2015) Electrospun biopolyesters as drug screening platforms for corneal keratocytes. International Journal of Polymeric Materials and Polymeric Biomaterials, 64 (15). pp. 785-791. ISSN 0091-4037

Azimah, E. and Zainal, N. and Hassan, Z. and Shuhaimi, A. and Bahrin, A. (2013) Electrical and optical characterization of Mg doping in GaN. Advanced Materials Research, 620. pp. 453-457.

Aziz, A. and Mohamad, J. (2013) Urban public transport in Penang: Some policy considerations. Proceedings of the Eastern Asia Society for Transportation Studies, 9. pp. 1-19. ISSN 1881-1132

Aziz, A. and Yau, Y.H. and Puma, G.L. and Fischer, C. and Ibrahim, S. and Pichiah, S. (2014) Highly efficient magnetically separable TiO2-graphene oxide supported SrFe12O19 for direct sunlight-driven photoactivity. Chemical Engineering Journal, 235. pp. 264-274. ISSN 1385-8947

Aziz, A.A. (2014) Investigating the robustness of the TSP routes through the recognition of special structured matrices. In: Conference of the International Federation of Operational Research Societies, 13-18 July 2014, Barcelona, Spain. (Submitted)

Aziz, A.A. and Cheng, C.K. and Ibrahim, S. and Matheswaran, M. and Saravanan, P. (2012) Visible light improved, photocatalytic activity of magnetically separable titania nanocomposite. Chemical Engineering Journal, 183. pp. 349-356. ISSN 13858947

Aziz, A.A. and Puma, G.L. and Ibrahim, S. and Saravanan, P. (2013) Preparation, characterisation and solar photoactivity of titania supported strontium ferrite nanocomposite photocatalyst. Journal of Experimental Nanoscience, 8 (3). pp. 295-310. ISSN 1745-8080

Aziz, A.A. and Yong, K.S. and Ibrahim, S. and Pichiah, S. (2012) Enhanced magnetic separation and photocatalytic activity of nitrogen doped titania photocatalyst supported on strontium ferrite. Journal of Hazardous Materials, 199-20. pp. 143-150. ISSN 0304-3894

Aziz, A.R. and Ibrahim, S. and Parthasarathy, R. (1999) Determination of just-suspension speed for Rushton Turbine using tank bottom pressure measurements. Institution of Chemical Engineers Symposium Series (146). pp. 325-335. ISSN 03070492 (ISSN)

Aziz, F. and Arof, Hamzah and Mokhtar, Norrima and Mubin, Marizan and Abu Talip, Mohamad Sofian (2015) Rotation invariant bin detection and solid waste level classification. Measurement, 65. pp. 19-28. ISSN 0263-2241

Aziz, S.B. and Abidin, Z.H.Z. (2015) Ion-transport study in nanocomposite solid polymer electrolytes based on chitosan: electrical and dielectric analysis. Journal of Applied Polymer Science, 132 (15).

Azooz, S.M. and Ahmad, F. and Ahmad, Harith and Harun, Sulaiman Wadi and Hamida, B.A. and Khan, S. and Halder, A. and Paul, M.C. and Pal, M. and Bhadra, S.K. (2015) Mode-locked 2 mu m fiber laser with a multi-walled carbon nanotube as a saturable absorber. Chinese Optics Letters, 13 (3). p. 4. ISSN 1671-7694

Azooz, S.M. and Harun, Sulaiman Wadi and Ahmad, Harith and Halder, A. and Paul, M.C. and Das, S. and Bhadra, S.K. (2015) A Q-switched fibre laser operating in the 2 mu m region based on nonlinear polarization rotation technique. Ukrainian Journal of Physical Optics, 16 (1). pp. 32-37. ISSN 1609-1833

Azooz, S.M. and Harun, Sulaiman Wadi and Ahmad, Harith and Halder, A. and Paul, Mukul Chandra and Pal, M. and Bhadra, S.K. (2015) Mode-locked thulium ytterbium co-doped fiber laser with graphene oxide paper saturable absorber. Chinese Physics Letters, 32 (1). ISSN 0256-307X

Azri, M. and Abd Rahim, N. and Abd Halim, W. (2015) A highly efficient single-phase transformerless h-bridge inverter for reducing leakage ground current in photovoltaic grid-connected system. Electric Power Components and Systems, 43 (8-10). pp. 928-938. ISSN 1532-5008

Azuddin, M. and Choudhury, I.A. and Taha, Z. (2015) Development and performance evaluation of a low-cost custom-made vertical injection molding machine. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 37 (1). pp. 79-86. ISSN 1678-5878

B

Bagh, F.S.G. and Shahbaz, K. and Mjalli, F.S. and Hashim, M.A. and AlNashef, I.M. (2015) Zinc (II) chloride-based deep eutectic solvents for application as electrolytes: Preparation and characterization. Journal of Molecular Liquids, 204. pp. 76-83. ISSN 0167-7322

Bahadori, L. and Chakrabarti, M.H. and Manan, N.S.A. and Hashim, M.A. and Mjalli, F.S. and AlNashef, I.M. and Brandon, N. (2015) The Effect of Temperature on Kinetics and Diffusion Coefficients of Metallocene Derivatives in Polyol-Based Deep Eutectic Solvents. PLoS ONE, 10 (12). ISSN 1932-6203

Baharuddin, N.H. and Sulaiman, N.M.N. and Aroua, M.K. (2015) Removal of heavy metal Ions from mixed solutions via polymer-enhanced ultrafiltration using starch as a water-soluble biopolymer. Environmental Progress & Sustainable Energy, 34 (2). pp. 359-367. ISSN 1944-7442

Baharuddin, N.H. and Sulaiman, N.M.N. and Aroua, M.K. (2015) Removal of zinc and lead ions by polymer-enhanced ultrafiltration using unmodified starch as novel binding polymer. International Journal of Environmental Science and Technology, 12 (6). pp. 1825-1834. ISSN 1735-1472

Bahri, S. (2010) Enhancing the delivery of library’s services through the implementation of an emerging information technology: a process framework. In: Pacific Asia Conference in Information System, 9-12 July 2010, Taipei,Taiwan.

Bahri, S. and Jaafar, N.I. (2014) Against all odds: how a government's open source software (OSS) implementation survived. In: 25'h Australasian Conference on Information Systems, 08-10 Dec 2014, Auckland, New Zealand. (Submitted)

Balakrishnan, V. (2014) Learning via a social media enabled tool: Do learning styles make a difference? In: International Conference on Distance Learning and Education, 08-09 Oct 2014, Switzerland.

Balakrishnan, V. (2011) An intelligent diagnostic system for diabetes using rule based reasoning and object-oriented methodology. In: IADIS Multi Conference on Computer Science and Information Systems, 24-26 Jul 2011, Rome, Italy.

Balakrishnan, V. and Lloyd-Yemoh, E. (2014) Stemming and lemmatization: A comparison of retrieval performances. In: Proceedings of SCEI Seoul Conferences, 10-11 Apr 2014, Seoul, Korea.

Bani Hashim, A.Y. and Abu Osman, N.A. and Wan Abas, W.A.B. and Abdul Latif, L. (2013) Approximating the relationship among the degree of the reaction forces and the nodes on footprint during a stance phase. Applied Mathematical Modelling, 37 (1-2). pp. 258-264. ISSN 0307904X

Bani Hashim, A.Y. and Abu Osman, N.A. and Wan Abas, W.A.B. and Abdul Latif, L. (2011) Approximation technique for prosthetic design using numerical foot profiling. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Bani Hashim, A.Y. and Abu Osman, N.A. and Wan Abas, W.A.B. and Abdul Latif, L. (2009) Evaluation of a bio-mechanism by graphed static equilibrium forces. World Academy of Science, Engineering and Technology, 36. pp. 807-810. ISSN 2010376X

Bani Hashim, A.Y. and Abu Osman, N.A. and Wan Abas, Wan Abu Bakar and Abdul Latif, L. (2011) Prosthetic foot design: the significance of the normalized ground reaction force. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Banu, L.J. and Balasubramaniam, P. and Ratnavelu, K. (2015) Robust stability analysis for discrete-time uncertain neural networks with leakage time-varying delay. Neurocomputing, 151 (2). pp. 808-816.

Baradaran, S. and Moghaddam, E. and Nasiri-Tabrizi, B. and Basirun, W.J. and Mehrali, M. and Sookhakian, M. and Hamdi, M. and Alias, Y. (2015) Characterization of nickel-doped biphasic calcium phosphate/graphene nanoplatelet composites for biomedical application. Materials Science & Engineering C-Materials for Biological Applications, 49. pp. 656-668. ISSN 0928-4931

Baranitharan, E. and Khan, M.R. and Yousuf, A. and Teo, W.F.A. and Tan, G.Y.A. and Cheng, C.K. (2015) Enhanced power generation using controlled inoculum from palm oil mill effluent fed microbial fuel cell. Fuel, 143. pp. 72-79.

Barzani, M.M. and Sarhan, A.A.D. and Farahany, S. and Ramesh, S. and Maher, I. (2015) Investigating the Machinability of Al-Si-Cu cast alloy containing bismuth and antimony using coated carbide insert. Measurement, 62. pp. 170-178. ISSN 0263-2241

Barzani, M.M. and Zalnezhad, E. and Sarhan, A.A.D. and Farahany, S. and Ramesh, S. (2015) Fuzzy logic based model for predicting surface roughness of machined Al-Si-Cu-Fe die casting alloy using different additives-turning. Measurement, 61. pp. 150-161. ISSN 0263-2241

Batumalay, M. and Harun, Sulaiman Wadi and Irawati, Ninik and Ahmad, Harith and Arof, Hamzah (2015) A study of relative humidity fiber-optic sensors. IEEE Sensors Journal, 15 (3). pp. 1945-1950. ISSN 1530-437X

Besharati, S.R. and Dabbagh, V. and Amini, H. and Sarhan, A.A.D. and Akbari, J. (2015) Nonlinear dynamic analysis of a new antibacklash gear mechanism design for reducing dynamic transmission error. Journal of Mechanical Design, 137 (5). p. 3. ISSN 1050-0472

Beshkar, F. and Zinatloo-Ajabshir, S. and Bagheri, S. and Salavati-Niasari, M. (2017) Novel preparation of highly photocatalytically active copper chromite nanostructured material via a simple hydrothermal route. PLoS ONE, 12 (6). e0158549. ISSN 1932-6203

Bhattacharyya, A. and Pachori, R.B. and Upadhyay, A. and Acharya, U.R. (2017) Tunable-Q Wavelet Transform Based Multiscale Entropy Measure for Automated Classification of Epileptic EEG Signals. Applied Sciences, 7 (4). p. 385. ISSN 2076-3417

Bhuiyan, M.H.U. and Saidur, R. and Mostafizur, R.M. and Mahbubul, I.M. and Amalina, M.A. (2015) Experimental investigation on surface tension of metal oxide-water nanofluids. International Communications in Heat and Mass Transfer, 65. pp. 82-88. ISSN 0735-1933

Bhuiyan, M.S.H. and Choudhury, I.A. (2015) Investigation of tool wear and surface finish by analyzing vibration signals in turning assab-705 steel. Machining Science and Technology, 19 (2). pp. 236-261. ISSN 1091-0344

Bhuiyan, M.S.H. and Choudhury, I.A. and Dahari, M. (2015) Development of a control system for artificially rehabilitated limbs: A review. Biological Cybernetics, 109 (2). pp. 141-162. ISSN 0340-1200

Bimba, A. and Ismail, M.A. and Idris, N. and Jaafar, S. and Mahmud, R. (2015) Towards enhancing the compilation of Al-Hadith text in Malay. In: International Conference on World Islamic Studies (ICWIS 2015), 08-09 Mac 2015, Seoul, South Korea.

Bouafass, A. and Rahmani, L. and Mekhilef, S. (2015) Design and real time implementation of single phase boost power factor correction converter. Isa Transactions, 55. pp. 267-274. ISSN 0019-0578

Bradley, D.A. and Mandiraji, G.A. and Ghomeishi, M. and Dermosesian, E. and Adikan, Faisal Rafiq Mahamd and Rashid, H.A.A. and Maah, M.J. (2015) Enhancing the radiation dose detection sensitivity of optical fibres. Applied Radiation and Isotopes, 100. pp. 43-49. ISSN 0969-8043

Bulgiba, A.M. and Hairuliza, R. and Rasiah, R.I. (2001) Improving internet access in the University of Malaya Medical Centre: A NADI IT innovation. Journal of the University of Malaya Medical Centre (JUMMEC), 5 (2). pp. 93-97. ISSN 1823-7339

Buthiyappan, A. and Aziz, A.R.A. and Daud, W. (2015) Degradation performance and cost implication of UV-integrated advanced oxidation processes for wastewater treatments. Reviews in Chemical Engineering, 31 (3). pp. 263-302. ISSN 0167-8299

C

Ch'ng, S.Y. and Andriyana, A. and Tee, Y.L. and Verron, E. (2015) Effects of carbon black and the presence of static mechanical strain on the swelling of elastomers in solvent. Materials, 8 (3). pp. 884-898. ISSN 1996-1944

Chai, C.H. and Khadijah, R. and Chan, L.K. (2015) A phantom study on factors influencing exposure indicator (EI). In: 20th Asia Australasia Conference of Radiological Technologists in Conjuction with 2nd Southeast Asia Radiographers Conference and 3rd Asia Radiation Therapy Symposium, 20 - 23 August 2015, Singapore Suntec Convention and Exhibition Centre.

Chan, B.T. and Lim, E. and Ong, C.W. and Abu Osman, N.A. (2015) Effect of spatial inlet velocity profiles on the vortex formation pattern in a dilated left ventricle. Computer Methods in Biomechanics and Biomedical Engineering, 18 (1). pp. 90-96. ISSN 1025-5842

Chan, C.H. and Lim, J.J. and Yusoff, R. and Ngoh, G.C. (2015) A generalized energy-based kinetic model for microwave-assisted extraction of bioactive compounds from plants. Separation and Purification Technology, 143. pp. 152-160. ISSN 1383-5866

Chan, C.H. and Yusoff, R. and Ngoh, G.C. (2015) Assessment of scale-up parameters of microwave-assisted extraction via the extraction of flavonoids from cocoa leaves. Chemical Engineering & Technology, 38 (3). pp. 489-496. ISSN 0930-7516

Chan, C.S. and Coghill, G.M. and Liu, H. (2011) Recent advances in fuzzy qualitative reasoning. International Journal of Uncertainty Fuzziness and Knowledge-based Systems, 19 (3). pp. 417-422.

Chan, C.S. and Liu, H. and Brown, D. (2007) Adapting robot kinematics for human-arm motion recognition. International Journal of Knowledge-based and Intelligent Engineering Systems, 11 (4). pp. 207-217. ISSN 1327-2314

Chan, C.S. and Liu, H.H. (2009) Fuzzy qualitative human motion analysis. IEEE Transactions on Fuzzy Systems, 17 (4). pp. 851-862. ISSN 1063-6706

Chang, Kah-Hyong and Paramesran, R. (2015) A configurable architecture for fast moments computation. Journal of Signal Processing Systems for Signal Image and Video Technology, 78 (2). pp. 179-186. ISSN 1939-8018

Chang, R.K.Y. and Loo, C.K. and Rao, M.V.C. (2009) Enhanced probabilistic neural network with data imputation capabilities for machine-fault slassification. Neural Computing & Applications, 18 (7). pp. 791-800. ISSN 0941-0643

Chang, R.K.Y. and Loo, C.K. and Rao, M.V.C. (2008) A global k-means approach for autonomous cluster initialization of probabilistic neural network. Informatica, 32. pp. 219-225. ISSN 0350-5596

Chang, Siow-Wee and Sameem, A.K. and Zain, R.B. and Merican, A.F.M.A. (2010) A bootstrap-ANFIS framework for oral cancer prognosis based on clinical and genomic markers. Computer Science and Information Technology (ICCSIT), 2010 3rd IEEE International Conference on, 6. pp. 487-491. ISSN 978-1-4244-5537-9

Chekanov, S. and Derrick, M. and Magill, S. and Musgrave, B. and Nicholass, D. and Repond, J. and Yoshida, R. and Mattingly, M.C.K. and Antonioli, P. and Bari, G. and Bellagamba, L. and Boscherini, D. and Bruni, A. and Bruni, G. and Cindolo, F. and Corradi, M. and Iacobucci, G. and Margotti, A. and Nania, R. and Polini, A. and Antonelli, S. and Basile, M. and Bindi, M. and Cifarelli, L. and Contin, A. and De Pasquale, S. and Sartorelli, G. and Zichichi, A. and Bartsch, D. and Brock, I. and Hartmann, H. and Hilger, E. and Jakob, H.P. and Juengst, M. and Nuncio-Quiroz, A.E. and Paul, E. and Samson, U. and Schoenberg, V. and Shehzadi, R. and Wlasenko, M. and Morris, J.D. and Kaur, M. and Kaur, P. and Singh, I. and Capua, M. and Fazio, S. and Mastroberardino, A. and Schioppa, M. and Susinno, G. and Tassi, E. and Kim, J.Y. and Ibrahim, Z.A. and Idris, F.M. and Kamaluddin, B. and Abdullah, W.A.T.W. and Ning, Y. and Ren, Z. and Sciulli, F. and Chwastowski, J. and Eskreys, A. and Figiel, J. and Galas, A. and Olkiewicz, K. and Pawlik, B. and Stopa, P. and Zawiejski, L. and Adamczyk, L. and Bold, T. and Grabowska-Bold, I. and Kisielewska, D. and Lukasik, J. and Przybycien, M. and Suszycki, L. and Kotanski, A. and Slominski, W. and Bachynska, O. and Behnke, O. and Behr, J. and Behrens, U. and Blohm, C. and Borras, K. and Bot, D. and Ciesielski, R. and Coppola, N. and Fang, S. and Geiser, A. and Goettlicher, P. and Grebenyuk, J. and Gregor, I. and Haas, T. and Hain, W. and Huettmann, A. and Januschek, F. and Kahle, B. and Katkov, I.I. and Klein, U. and Koetz, U. and Kowalski, H. and Libov, V. and Lisovyi, M. and Lobodzinska, E. and Loehr, B. and Mankel, R. and Melzer-Pellmann, I.A. and Miglioranzi, S. and Montanari, A. and Namsoo, T. and Notz, D. and Parenti, A. and Raval, A. and Roloff, P. and Rubinsky, I. and Schneekloth, U. and Spiridonov, A. and Szuba, D. and Szuba, J. and Theedt, T. and Tomaszewska, J. and Verbytskyi, A. and Wolf, G. and Wrona, K. and Yaguees-Molina, A.G. and Youngman, C. and Zeuner, W. and Drugakov, V. and Lohmann, W. and Schlenstedt, S. and Barbagli, G. and Gallo, E. and Pelfer, P.G. and Bamberger, A. and Dobur, D. and Karstens, F. and Vlasov, N.N. and Bussey, P.J. and Doyle, A.T. and Forrest, M. and Saxon, D.H. and Skillicorn, I.O. and Gialas, I. and Papageorgiu, K. and Holm, U. and Klanner, R. and Lohrmann, E. and Perrey, H. and Schleper, P. and Schoerner-Sadenius, T. and Sztuk, J. and Stadie, H. and Turcato, M. and Long, K.R. and Tapper, A.D. and Matsumoto, T. and Nagano, K. and Tokushuku, K. and Yamada, S. and Yamazaki, Y. and Barakbaev, A.N. and Boos, E.G. and Pokrovskiy, N.S. and Zhautykov, B.O. and Aushev, V. and Borodin, M. and Kadenko, I. and Korol, Ie. and Kuprash, O. and Lontkovskyi, D. and Makarenko, I. and Onishchuk, Y. and Salii, A. and Sorokin, I. and Viazlo, V. and Volynets, O. and Zenaiev, O. and Zolko, M. and Son, D. and de Favereau, J. and Piotrzkowski, K. and Barreiro, F. and Glasman, C. and Jimenez, M. and del Peso, J. and Ron, E. and Terron, J. and Uribe-Estrada, C. and Corriveau, F. and Schwartz, J. and Zhou, C. and Tsurugai, T. and Antonov, A. and Dolgoshein, B.A. and Gladkov, D. and Sosnovtsev, V. and Stifutkin, A. and Suchkov, S. and Dementiev, R.K. and Ermolov, P.F. and Gladilin, L.K. and Golubkov, Y.A. and Khein, L.A. and Korzhavina, I.A. and Kuzmin, V.A. and Levchenko, B.B. and Lukina, O.Y. and Proskuryakov, A.S. and Shcheglova, L.M. and Zotkin, D.S. and Abt, I. and Caldwell, A. and Kollar, D. and Reisert, B. and Schmidke, W.B. and Grigorescu, G. and Keramidas, A. and Koffeman, E. and Kooijman, P. and Pellegrino, A. and Tiecke, H. and Vazquez, M. and Wiggers, L. and Bruemmer, N. and Bylsma, B. and Durkin, L.S. and Lee, A. and Ling, T.Y. and Cooper-Sarkar, A.M. and Devenish, R.C.E. and Ferrando, J. and Foster, B. and Gwenlan, C. and Horton, K. and Oliver, K. and Robertson, A. and Walczak, R. and Bertolin, A. and Dal Corso, F. and Dusini, S. and Longhin, A. and Stanco, L. and Brugnera, R. and Carlin, R. and Garfagnini, A. and Limentani, S. and Oh, B.Y. and Whitmore, J.J. and Iga, Y. and D'Agostini, G. and Marini, G. and Nigro, A. and Hart, J.C. and Abramowicz, H. and Ingbir, R. and Kananov, S. and Levy, A. and Stern, A. and Ishitsuka, M. and Kanno, T. and Kuze, M. and Maeda, J. and Hori, R. and Okazaki, N. and Shimizu, S. and Hamatsu, R. and Kitamura, S. and Ota, O. and Ri, Y.D. and Costa, M. and Ferrero, M.I. and Monaco, V. and Sacchi, R. and Sola, V. and Solano, A. and Arneodo, M. and Ruspa, M. and Fourletov, S. and Martin, J.F. and Stewart, T.P. and Boutle, S.K. and Butterworth, J.M. and Jones, T.W. and Loizides, J.H. and Wing, M. and Brzozowska, B. and Ciborowski, J. and Grzelak, G. and Kulinski, P. and Luzniak, P. and Malka, J. and Nowak, R.J. and Pawlak, J.M. and Perlanski, W. and Zarnecki, A.F. and Adamus, M. and Plucinski, P. and Tymieniecka, T. and Eisenberg, Y. and Hochman, D. and Karshon, U. and Brownson, E. and Reeder, D.D. and Savin, A.A. and Smith, W.H. and Wolfe, H. and Bhadra, S. and Catterall, C.D. and Hartner, G. and Noor, U. and Whyte, J. and Collaboration, ZEUS (2010) A QCD analysis of ZEUS diffractive data. Nuclear Physics B, 831 (1-2). pp. 1-25. ISSN 0550-3213

Chen, L. and Lam, Wei-Haur (2015) A review of survivability and remedial actions of tidal current turbines. Renewable & Sustainable Energy Reviews, 43. pp. 891-900. ISSN 1364-0321

Chen, Y.W. and Tan, T.H. and Lee, H.V. and Hamid, Sharifah Bee Abd (2017) Easy Fabrication of Highly Thermal-Stable Cellulose Nanocrystals Using Cr(NO3)3 Catalytic Hydrolysis System: A Feasibility Study from Macro- to Nano-Dimensions. Materials, 10 (1). p. 42. ISSN 1996-1944

Cheong, L.S. and Abdullah, H.S.L. and Yusop, F.D. and Muhamad, A.S. and Tsuey, C.S. and Wei, C.S. (2012) Challenges among individuals with visual impairment in an institution of higher learning in Malaysia. Journal of Special Needs Education, 2. pp. 99-107.

Chew, C.M. and Aroua, M.K. and Hussain, M.A. and Wan Ismail, W.M.Z. (2015) Practical performance analysis of an industrial-scale ultrafiltration membrane water treatment plant. Journal of the Taiwan Institute of Chemical Engineers, 46. pp. 132-139. ISSN 1876-1070

Chew, C.S. and Durairaj, R. and Haseeb, A.S. Md. Abdul and Beake, B. (2015) Mechanical properties of interfacial phases between Sn-3.5 Ag solder and Ni-18 at. W barrier film by nanoindentation. Soldering & Surface Mount Technology, 27 (2). pp. 90-94. ISSN 0954-0911

Chia, P.Y. and Haseeb, A.S. Md. Abdul (2015) Intermixing reactions in electrodeposited Cu/Sn and Cu/Ni/Sn multilayer interconnects during room temperature and high temperature aging. Journal of Materials Science-Materials in Electronics, 26 (1). pp. 294-299. ISSN 0957-4522

Chiang, A. and Baba, M.S. (2006) Developing an intelligent system to acquire meeting knowledge in problem-based learning environments. International Journal of Innovative Computing Information and Control, 2 (2). pp. 465-479. ISSN 1349-4198

Chiew, T.K. and Salim, S.S. (2003) Webuse: website usability evaluation tool. Malaysian Journal of Computer Science, 16 (1). pp. 47-57. ISSN 0127-9084

Cho, J. and Choi, J. and Nam, T. and Park, J. and Park-Ko, I. and Ibrahim, F. (2007) Development of tilt table with visual feedback function for hemiplegia patients. Conference proceedings : Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference, 2007. pp. 4782-4785. ISSN 1557-170X

Choi, J.R. and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar and Yong, K.W. and Poon, C.T. and Noor Azmi, M.A. and Omar, S.Z. and Chua, K.H. and Xu, F. and Safwani, W.K.Z.W. (2015) In situ normoxia enhances survival and proliferation rate of human adipose tissue-derived stromal cells without increasing the risk of tumourigenesis. PLoS ONE, 10 (1). e0115034. ISSN 1932-6203

Chong, T. and Pan, S.L. and Leong, C. and Bahri, S. and Ahmad Khan, A.F. (2014) Use of social media in disaster relief during the Kuantan (Malaysia) flood. In: 35th International Conference on Information Systems, 14-17 Dec 2014, Auckland, New Zealand. (Submitted)

Chong, W.T. and Muzammil, W.K. and Fazlizan, A. and Hassan, M.R. and Taheri, H. and Gwani, M. and Kothari, H. and Poh, S.C. (2015) Urban eco-greenergy (TM) hybrid wind-solar photovoltaic energy system and its applications. International Journal of Precision Engineering and Manufacturing, 16 (7). pp. 1263-1268. ISSN 2234-7593

Choo, S.W. and Ang, M.Y. and Dutta, A. and Tan, S.Y. and Siow, C.C. and Heydari, H. and Mutha, N.V.R. and Wee, W.Y. and Wong, G.J. (2015) MycoCAP - Mycobacterium Comparative Analysis Platform. Scientific Reports, 5. ISSN 2045-2322

Choudhury, D. and Roy, T. and Krupka, I. and Hartl, M. and Mootanah, R. (2015) Tribological investigation of ultra-high molecular weight polyethylene against advanced ceramic surfaces in total hip joint replacement. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 229 (4). pp. 410-419. ISSN 1350-6501

Chu Kiong, L. and Rajeswari, M. and Rao, M.V.C. (2003) Extrapolation detection and novelty-based node insertion for sequential growing multi-experts network. Applied Soft Computing, 3 (2). pp. 159-175. ISSN 1568-4946

Chu Kiong, L. and Rajeswari, M. and Rao, M.V.C. (2003) Nonlinear dynamic system identification and control via constructivism inspired neural network. Applied Soft Computing, 3 (3). pp. 237-257. ISSN 1568-4946

D

Dahlui, M. and Azahar, N. and Bulgiba, A. and Zaki, R. and Oche, O.M. and Adekunjo, F.O. and Chinna, K. (2015) HIV/AIDS Related Stigma and Discrimination against PLWHA in Nigerian Population. PLoS ONE, 10 (12). ISSN 1932-6203

Daniel, E.G.S. and Abualrob, M.M.A. (2011) The Delphi technique in identifying learning objectives for the development of science, technology and society modules for Palestinian ninth grade science curriculum. International Journal of Science Education. pp. 1-21. ISSN 0950-0693

Darain, K.M.U. and Jumaat, M.Z. and Hossain, M.A. and Hosen, M.A. and Obaydullah, M. and Huda, M.N. and Hossain, I. (2015) Automated serviceability prediction of NSM strengthened structure using a fuzzy logic expert system. Expert Systems with Applications, 42 (1). pp. 376-389. ISSN 0957-4174

Darain, K.M.U. and Jumaat, M.Z. and Hossain, M.A. and Hosen, M.A. and Obaydullah, M. and Huda, M.N. and Hossain, I. (2015) Automated serviceability prediction of NSM strengthened structure using a fuzzy logic expert system. Expert Systems with Applications, 42 (1). pp. 376-389. ISSN 0957-4174

Datta, R.S. and Said, S.M. and Shahrir, S.R. and Abdullah, N. and Sabri, M.F.M. and Balamurugan, S. and Miyazaki, Y. and Hayashi, K. and Hashim, N.A. and Habiba, U. and Afifi, A.M. (2015) Ionic liquid entrapment by an electrospun polymer nanofiber matrix as a high conductivity polymer electrolyte. RSC Advances, 5 (60). pp. 48217-48223. ISSN 2046-2069

Davoodi, M.M. and Sapuan, S.M. and Aidy, A. and Abu Osman, N.A. and Oshkour, A.A. and Wan Abas, W.A.B. (2012) Development process of new bumper beam for passenger car: a review. Materials and Design, 40. pp. 304-313. ISSN 0261-3069

Dawal, S. and Tahriri, F. and Jen, Y. and Case, K. and Tho, N. and Zuhdi, A. and Mousavi, M. and Amindoust, A. and Sakundarini, N. (2015) Empirical evidence of AMT practices and sustainable environmental initiatives in malaysian automotive SMEs. International Journal of Precision Engineering and Manufacturing, 16 (6). pp. 1195-1203. ISSN 2234-7593

Dawal, S.Z.M. and Ismail, Z. and Yusuf, K. and Abdul-Rashid, S.H. and Shalahim, N.S.M. and Abdullah, N.S. and Kamil, N.S.M. (2015) Determination of the significant anthropometry dimensions for user-friendly designs of domestic furniture and appliances - Experience from a study in Malaysia. Measurement, 59. pp. 205-215. ISSN 0263-2241

Dezdar, S. and Ainin, S. (2010) ERP implementation success in Iran: Examining the role of system environment factors. In: International Conference on Education and Information Technologies, 28-30 Jun 2010, Paris,France.

Dian, L.Y. and Johan, M.R. (2015) Electrical conductivity and transport properties of gold decorated amorphous carbon nanotubes/Epoxy Composites. Fullerenes Nanotubes and Carbon Nanostructures, 23 (2). pp. 120-124. ISSN 1536-383X

Dian, L.Y. and Johan, M.R. (2015) Functionalization of amorphous carbon nanotubes for au nanoparticles hybridization. Fullerenes Nanotubes and Carbon Nanostructures, 23 (2). pp. 181-186. ISSN 1536-383X

Din, M.M.A. and Rasouli, A.A. (2010) Application of the object-oriented technique to monitor coastline changes- case study: Caspian sea. Disaster Advances, 3 (2). pp. 56-63.

Doufesh, H. and Faisal, T. and Lim, K.S. and Ibrahim, F. (2011) EEG Spectral Analysis on Muslim Prayers. Applied Psychophysiology and Biofeedback.

Doufesh, H. and Faisal, T. and Lim, K.S. and Ibrahim, F. (2012) EEG spectral analysis on muslim prayers. Applied Psychophysiology Biofeedback, 37 (1). pp. 11-18. ISSN 1090-0586

Doufesh, H. and Ibrahim, F. and Ismail, N.A. and Wan Ahmad, W.A. (2013) Assessment of heart rates and blood pressure in different Salat positions. Journal of Physical Therapy Science, 25 (2). pp. 211-214. ISSN 0915-5287

Dumanig, F.P. and David, M.K. and Jubilado, R. (2011) Computer-Mediated reading and its impact on learners' reading comprehension skills. In: Proceedings of the 10th European Conference on E-Learning, 10-11 Nov 2011, United Kingdom.

E

Ebrahimi, M. and Rahman, H.A. and Mohd-Rahim, F.A. and Chen, W. (2014) Lifecycle framework for sustainable residential buildings in Malaysia. Open House International, 39 (4). pp. 14-27.

Edzan, N.N. (2010) Are you on Facebook? we are. In: Emerging Trends and Technologies in Libraries and Information Services , June 3-5, 2010, India.

Edzan, N.N. (2012) Enhancing information discovery through mobile technologies country report: Malaysia. In: 8th Meeting of the ASEAN University Network Inter-Library Online (AUNILO), 1-2 June 2012, National University of Singapore, Singapore.

Edzan, N.N. (2011) Increasing the visibility of our electronic resources. In: iGroup Online Conference 2011.

Edzan, N.N. (2009) Institutional repositories. In: 3-Day Institutional Repository Workshop Using DSPACE for members of AUNILO, 25-27 MAY 2009.

Edzan, N.N. (2012) Institutional repositories and libraries: being visible. In: Asia-Pacific Association of Medical Editors Convention 2012.

Edzan, N.N. (2000) Malaysian legal sources: Print. Malaysian Journal of Library & Information Science, 5 (1). pp. 19-36.

Edzan, N.N. (2007) Tracing information literacy of computer science undergraduates: A content analysis of students' academic exercise. Malaysian Journal of library & Information Science, 12 (1). pp. 97-109.

Edzan, N.N. (2015) University libraries as archives: The Malaysian experience. In: International Conference on Library and Information Science, 23-25 August 2015, Osaka, Japan.

Edzan, N.N. (1996) The use of CD-ROM databases by Malaysian postgraduate students in Leeds. Malaysian Journal of Library & Information Science, 1 (1). pp. 37-55.

Edzan, N.N. and Mohd Sharif, M.S. (2005) Nila: A national information literacy agenda for Malaysia. Malaysian Journal of Library & Information Science, 10 (1). pp. 91-103.

Elham, M. and Vimala, B. (2015) Evaluating reputation of agents in e-commerce multi-agent environments. In: Proceedings of the 4th International Conference on Computer Science & Computational Mathematics (ICCSCM 2015), 7-8 May 2015,, Langkawi, Malaysia.

Elsayed, B.A. and Hassan, M.A. and Mekhilef, S. (2015) Fuzzy swinging-up with sliding mode control for third order cart-inverted pendulum system. International Journal of Control Automation and Systems, 13 (1). pp. 238-248. ISSN 1598-6446

Emami, S.D. and Soltanian, M.R.K. and Attaran, A. and Abdul-Rashid, H.A. and Penny, R. and Moghavvemi, Mahmoud and Harun, Sulaiman Wadi and Ahmad, Harith and Mohammed, W.S. (2015) Application of fano resonance effects in optical antennas formed by regular clusters of nanospheres. Applied Physics A: Materials Science & Processing, 118 (1). pp. 139-150. ISSN 0947-8396

Esfe, Mohammad Hemmat and Saedodin, Seyfolah and Naderi, Ali and Alirezaie, Ali and Karimipour, Arash and Wongwises, Somchai and Goodarzi, Marjan and Dahari, Mahidzal (2015) Modeling of thermal conductivity of ZnO-EG using experimental data and ANN methods. International Communications in Heat and Mass Transfer, 63. pp. 35-40. ISSN 0735-1933

Eshraghi, A. and Abu Osman, N.A. and Gholizadeh, H. and Ahmadian, J. and Rahmati, B. and Wan Abas, W.A.B. (2013) Development and evaluation of new coupling system for lower limb prostheses with acoustic alarm system. Scientific Reports, 3. p. 2270. ISSN 2045-2322

Eshraghi, A. and Abu Osman, N.A. and Gholizadeh, H. and Ali, S. and Sævarsson, S.K. and Wan Abas, W.A.B. (2013) An experimental study of the interface pressure profile during level walking of a new suspension system for lower limb amputees. Clinical Biomechanics, 28 (1). pp. 55-60. ISSN 0268-0033

Eshraghi, A. and Abu Osman, N.A. and Karimi, M.T. and Gholizadeh, H. and Ali, S. and Wan Abas, W.A.B. (2012) Quantitative and qualitative comparison of a new prosthetic suspension system with two existing suspension systems for lower limb amputees. American Journal of Physical Medicine and Rehabilitation, 91 (12). pp. 1028-1038. ISSN 0894-9115

Eshraghi, A. and Abu Osman, Noor Azuan and Gholizadeh, H. and Ali, S. and Wan Abas, Wan Abu Bakar (2015) Interface stress in socket/residual limb with transtibial prosthetic suspension systems during locomotion on slopes and stairs. American Journal of Physical Medicine & Rehabilitation, 94 (1). pp. 1-10. ISSN 0894-9115

F

Fahami, A. and Beall, G.W. and Nasiri-Tabrizi, B. and Pingguan-Murphy, B. (2015) Effect of high-energy ball milling on the formation and microstructural features of carbonated chlorapatite nanopowders. Ceramics International, 41 (3). pp. 4750-4758. ISSN 0272-8842

Fahami, A. and Nasiri-Tabrizi, B. and Beall, G.W. and Pingguan-Murphy, B. (2015) Effect of ion concentration on mechanosynthesis of carbonated chlorapatite nanopowders. Materials Letters, 146. pp. 16-19. ISSN 0167-577X

Faisal, T. and Ibrahim, F. and Taib, M.N. (2008) Analysis of significant factors for dengue infection prognosis using the self organizing map. Conference proceedings : Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference, 2008. pp. 5140-5143. ISSN 1557170X

Faisal, T. and Ibrahim, F. and Taib, M.N. (2008) Determination of the bioimpedance analysis parameters in dengue patients using the self organizing map. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Faisal, T. and Ibrahim, F. and Taib, M.N. (2010) A noninvasive intelligent approach for predicting the risk in dengue patients. Expert Systems with Applications, 37 (3). pp. 2175-2181. ISSN 0957-4174

Faisal, T. and Taib, M.N. and Ibrahim, F. (2012) Adaptive Neuro-Fuzzy Inference System for diagnosis risk in dengue patients. Expert Systems with Applications, 39 (4). pp. 4483-4495. ISSN 0957-4174

Faisal, T. and Taib, M.N. and Ibrahim, F. (2012) Neural network diagnostic system for dengue patients risk classification. Journal of Medical Systems, 36 (2). pp. 661-676. ISSN 0148-5598

Faisal, T. and Taib, M.N. and Ibrahim, F. (2010) Reexamination of risk criteria in dengue patients using the self-organizing map. Medical and Biological Engineering and Computing, 48 (3). pp. 293-301. ISSN 0140-0118

Faizal, M. and Saidur, R. and Mekhilef, S. and Hepbasli, A. and Mahbubul, I.M. (2015) Energy, economic, and environmental analysis of a flat-plate solar collector operated with SiO2 nanofluid. Clean Technologies and Environmental Policy, 17 (6). pp. 1457-1473. ISSN 1618-954X

Farhadi, H. and Salehi, H. and Yunus, M.M. and Aghaei Chadegani, A. and Farhadi, M. and Fooladi, M. and Ale Ebrahim, N. (2013) Does it matter which citation tool is used to compare the h-index of a group of highly cited researchers? Australian Journal of Basic and Applied Sciences, 7 (4). pp. 198-202. ISSN 1991-8178

Farhadi, M. and Salehi, H. and Embi, M.A. and Fooladi, M. and Farhadi, H. and Aehaei Chadegani, A. and Ale Ebrahim, N. (2013) Contribution of information and communication technology (ICT) in country'S H-index. Journal of Theoretical and Applied Information Technology, 57 (1). pp. 122-127. ISSN 1992-8645

Fariborzi, H. and Moghavvemi, M. (2009) EAMTR: Energy aware multi-tree routing for wireless sensor networks. IET Communications, 3 (5). pp. 733-739. ISSN 17518628

Faridah, O. and Alaa Eldin, M.E. (2014) Linking the water quality model with the real-time map and ambient phenomena. In: International Conference on Innovative Trends in Multidisciplinary Academic Research, 20 – 21 October 2014, Istanbul, Turkey.

Farzadi, A. and Waran, V. and Solati-Hashjin, M. and Rahman, Z.A.A. and Asadi, M. and Abu Osman, N.A. (2015) Effect of layer printing delay on mechanical properties and dimensional accuracy of 3D printed porous prototypes in bone tissue engineering. Ceramics International, 41 (7). pp. 8320-8330. ISSN 0272-8842

Fatoyinbo, H.O. and Kadri, N.A. and Gould, D.H. and Hoettges, K.F. and Labeed, F.H. (2011) Real-time cell electrophysiology using a multi-channel dielectrophoretic-dot microelectrode array. Electrophoresis, 32 (18). pp. 2541-2549. ISSN 01730835 (ISSN)

Fauzi, H. and Metselaar, H.S.C. and Mahlia, T.M.I. and Silakhori, M. and Ong, H.C. (2015) Thermal characteristic reliability of fatty acid binary mixtures as phase change materials (PCMs) for thermal energy storage applications. Applied Thermal Engineering, 80. pp. 127-131. ISSN 1359-4311

Foong, K.Y. and Alengaram, U.J. and Jumaat, M.Z. and Mo, K.H. (2015) Enhancement of the mechanical properties of lightweight oil palm shell concrete using rice husk ash and manufactured sand. Journal of Zhejiang University Science A, 16 (1). pp. 59-69. ISSN 1673-565X

Forooghi, P. and Abdi, I.A. and Dahari, M. and Hooman, K. (2015) Buoyancy induced heat transfer deterioration in vertical concentric and eccentric annuli. International Journal of Heat and Mass Transfer, 81. pp. 222-233. ISSN 0017-9310

Freddy, T.K.S. and Rahim, N.A. and Hew, W.P. and Che, H.S. (2015) Modulation techniques to reduce leakage current in three-phase transformerless H7 photovoltaic inverter. IEEE Transactions on Industrial Electronics, 62 (1). pp. 322-331. ISSN 0278-0046

Furuoka, F. (2015) Financial development and energy consumption: evidence from a heterogeneous panel of Asian countries. Renewable & Sustainable Energy Reviews, 52. pp. 430-444. ISSN 1364-0321

Furuoka, F. and Hoque, M.Z. (2015) Determinants of antiretroviral therapy coverage in Sub-Saharan Africa. PeerJ, 3. ISSN 2167-8359

G

Gaeid, K.S. and Ping, H.W. (2010) Induction motor fault detection and isolation through unknown input observer. Scientific Research and Essays, 5 (20). pp. 3152-3159. ISSN 1992-2248

Gan, G.K.W. and Yeo, K.S. and Adikan, Faisal Rafiq Mahamd and Shee, Yu Gang (2015) Four-wave-mixing-assisted brillouin fiber laser with double-brillouin-frequency spacing. Optical Fiber Technology, 21. pp. 198-201. ISSN 1068-5200

Gani, Abdullah and Abouzakhar, N. and Manson, G. (2003) UMAS learning requirement for controlling network resources. Developments in Applied Artificial Intelligence, 2718. pp. 487-494. ISSN 0302-9743

Gani, Abdullah and Han, Q. and Anuar, N.B. and Zakaria, O. (2009) Enhancing DSR protocol performance in mobile ad hoc network using ACK reply. WSEAS Transactions on Communications, 8 (2). pp. 227-236. ISSN 1109-2742

Gani, Abdullah and Hassan, M.K. and Zaidan, A.A. and Zaidan, B.B. (2011) Intelligent routing information protocol using full triggered update mechanism. International Journal of the Physical Sciences, 6 (11). pp. 2750-2761. ISSN 1992-1950

Gani, Abdullah and Li, X. and Yang, L. and Zakaria, O. (2008) Radio frequency combination for TCP/IP suite protocol improvement in 4G mobile internet networks. International Journal of Communications, 2 (1). pp. 27-36.

Gani, Abdullah and Li, X. and Yang, L. and Zakaria, O. and Anuar, N.B. (2009) Multi-bandwidth data path design for 5G wireless mobile internets. WSEAS Transactions on Information Science and Applications, 6 (2). pp. 159-168. ISSN 1790-0832

Gani, Abdullah and Mouratidis, H. and Abouzakhar, N.S. and Manson, G.A. (2002) Developing an intelligent user manager system for controlling smart school network resources. Malaysian Journal of Computer Science, 15 (2). pp. 56-69. ISSN 0127-9084

Gani, Abdullah and Yang, L. and Anuar, N.B. and Zakaria, O. and Taher, R.S. (2009) Implementing lightweight reservation protocol for mobile network using hybrid schema. WSEAS Transactions on Computers, 8 (3). pp. 417-428. ISSN 1109-2750

Gani, Abdullah and Zakaria, O. and Jumaat, N.B. (2004) A Markov Decision Process model for traffic prioritisation provisioning. Issues in Informing Science and Information Technology, 1. pp. 905-913.

Gareth Jones, E.B. (2012) Distribution of marine fungi, and fungal-like organisms, in the South China Sea , and their potential commercial use in industry and pharmaceutical application. In: 2nd Conference for Regional Cooperation in Ocean and Earth Science Research in the South China Sea, 21-24 October 2012, University of Malaya, Kuala Lumpur, Malaysia.

Garoosi, F. and Safaei, M.R. and Dahari, M. and Hooman, K. (2015) Eulerian-Lagrangian analysis of solid particle distribution in an internally heated and cooled air-filled cavity. Applied Mathematics and Computation, 250. pp. 28-46. ISSN 0096-3003

Ghafarirad, H. and Rezaei, S.M. and Sarhan, A.A.D. and Zareinejad, M. (2015) Continuous dynamic modelling of bimorph piezoelectric cantilevered actuators considering hysteresis effect and dynamic behaviour analysis. Mathematical and Computer Modelling of Dynamical Systems, 21 (2). pp. 130-152. ISSN 1387-3954

Ghafarirad, H. and Rezaei, S.M. and Sarhan, A.A.D.M. and Mardi, N.A. (2015) Modified robust external force control with disturbance rejection with application to piezoelectric actuators. Transactions of the Institute of Measurement and Control, 37 (1). pp. 131-143. ISSN 0142-3312

Gharehkhani, S. and Sadeghinezhad, E. and Kazi, S.N. and Yarmand, H. and Badarudin, A. and Safaei, M.R. and Zubir, M.N. (2015) Basic effects of pulp refining on fiber properties- a review. Carbohydrate Polymers, 115. pp. 785-803. ISSN 0144-8617

Ghauth, K.I. and Abdullah, N.A. (2010) Learning materials recommendation using good learners ratings and content-based filtering. Educational Technology Research and Development, 58 (6). pp. 711-727. ISSN 1042-1629

Ghauth, K.I. and Abdullah, N.A. (2010) Measuring learner's performance in e-learning recommender systems. Australasian Journal of Educational Technology, 26 (6). pp. 764-774. ISSN 1449-5554

Ghauth, K.I. and Abdullah, N.A. (2011) The effect of incorporating good learners' ratings in e-learning content-based recommender system. Educational Technology & Society, 14 (2). pp. 248-257. ISSN 1436-4522

Ghauth, K.I. and Abdullah, N.A. (2010) An empirical evaluation of learner performance in e-learning recommender systems and an adaptive hypermedia system. Malaysian Journal of Computer Science, 23 (3). pp. 141-152. ISSN 0127-9084

Ghavimi, S.A.A. and Ebrahimzadeh, M.H. and Solati-Hashjin, M. and Abu Osman, N.A. (2015) Polycaprolactone/starch composite: Fabrication, structure, properties, and applications. Journal of Biomedical Materials Research Part A, 103 (7). pp. 2482-2498. ISSN 1549-3296

Ghazali, M. and Kadri, N.A. (2011) Preliminary investigation of tensile properties of welded type I collagen to be used as surgical sealant. International Journal of Physical Sciences, 6 (36). pp. 8057-8062. ISSN 19921950 (ISSN)

Ghazilla, R.A.R. and Sakundarini, N. and Taha, Z. and Abdul-Rashid, S.H. and Yusoff, S. (2015) Design for environment and design for disassembly practices in Malaysia: a practitioner's perspectives. Journal of Cleaner Production, 108 (A). pp. 331-342. ISSN 0959-6526

Ghiyamat, A. and Shafri, H.Z.M. and Mahdiraji, G.A. and Ashurov, R. and Shariff, A.R.M. and Mansor, S. (2015) Airborne hyperspectral discrimination of tree species with different ages using discrete wavelet transform. International Journal of Remote Sensing, 36 (1). pp. 318-342. ISSN 0143-1161

Gholizadeh, H. and Abu Osman, N.A. and Eshraghi, A. and Ali, S. and Arifin, N. and Wan Abas, W.A.B. (2014) Evaluation of new suspension system for limb prosthetics. BioMedical Engineering Online, 13 (1). pp. 1-13. ISSN 1475-925X

Gholizadeh, H. and Abu Osman, N.A. and Eshraghi, A. and Ali, S. and Sævarsson, S.K. and Wan Abas, W.A.B. and Pirouzi, G.H. (2012) Transtibial prosthetic suspension: less pistoning versus easy donning and doffing. Journal of Rehabilitation Research and Development, 49 (9). pp. 1321-1330. ISSN 0748-7711

Gholizadeh, H. and Abu Osman, N.A. and Kamyab, M. and Eshraghi, A. and Lúvíksdóttir, A.G. and Wan Abas, W.A.B. (2012) Clinical evaluation of two prosthetic suspension systems in a bilateral transtibial amputee. American Journal of Physical Medicine and Rehabilitation, 91 (10). pp. 894-898. ISSN 0894-9115

Gholizadeh, H. and Abu Osman, N.A. and Kamyab, M. and Eshraghi, A. and Wan Abas, W.A.B. and Azam, M.N. (2012) Transtibial prosthetic socket pistoning: static evaluation of Seal-In((R)) X5 and Dermo((R)) Liner using motion analysis system. Clinical Biomechanics, 27 (1). pp. 34-39. ISSN 0268-0033

Gholizadeh, H. and Abu Osman, N.A. and Luviksdottir, A.G. and Eshraghi, A. and Kamyab, M. and Wan Abas, W.A.B. (2011) A new approach for the pistoning measurement in transtibial prosthesis. Prosthetics and Orthotics International, 35 (4). pp. 360-364. ISSN 0309-3646

Gholizadeh, H. and Abu Osman, N.A. and Luviksdottir, A.G. and Kamyab, M. and Eshraghi, A. and Ali, S. and Wan Abas, Wan Abu Bakar (2011) A new method for measuring pistoning in lower limb prosthetic. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Gondos, A.S. and Al-Moyed, K.A. and Al-Robasi, A.B.A. and Al-Shamahy, H.A. and Alyousefi, N.A. (2015) Urinary Tract Infection among Renal Transplant Recipients in Yemen. PLoS ONE, 10 (12). ISSN 1932-6203

Gopal, K. and Gowtham, M. and Sachin, S. and Ram, M.R. and Shankar, E.M. and Kamarul, Tunku (2015) Attrition of Hepatic Damage Inflicted by Angiotensin II with alpha-Tocopherol and beta-Carotene in Experimental Apolipoprotein E Knock-out Mice. Scientific Reports, 5. p. 18300. ISSN 2045-2322

Gopinath, V. and Priyadarshini, S. and Loke, M.F. and Arunkumar, J. and Marsili, E. and MubarakAli, D. and Velusamy, P. and Vadivelu, J. (2017) Biogenic synthesis, characterization of antibacterial silver nanoparticles and its cell cytotoxicity. Arabian Journal of Chemistry, 10 (8). pp. 1107-1117. ISSN 1878-5352

Gu, Y. and Zainab, A.N. (2000) Channels of published research communication used by Malaysian authors in computer science and information technology. Malaysian Journal of Library & Information Science, 5 (1). pp. 105-118. ISSN 1394-6234

Gulzar, M. and Masjuki, Haji Hassan and Kalam, M.A. and Varman, M. and Rizwanul Fattah, I.M. (2015) Oil filter modification for biodiesel–fueled engine: A pathway to lubricant sustainability and exhaust emissions reduction. Energy Conversion and Management, 91. pp. 168-175. ISSN 0196-8904

Gunasegaran, M.K. and Tan, C.K. and Bakar, A.H.A. and Mokhlis, H. and Illias, H.A. (2015) Progress on power swing blocking schemes and the impact of renewable energy on power swing characteristics: a review. Renewable & Sustainable Energy Reviews, 52. pp. 280-288. ISSN 1364-0321

Gupta, B.M and Lal, K. and Zainab, A.N. (2002) India's collaboration in science and technology with South East Asian countries. lrlalaysian Journal of Lihrary & Information Science, 7 (2). pp. 69-89.

H

Hafeez Khokhar, R. and Md Noor, R. and Zrar Ghafoor, K. and Ke, C.H. and Ngadi, M.A. (2011) Fuzzy-assisted social-based routing for urban vehicular environments. EURASIP Journal on Wireless Communications and Networking, 2011 (1). pp. 1-15. ISSN 1687-1499

Haghshenasfard, M. and Yeoh, G.H. and Dahari, M. and Hooman, K. (2015) On numerical study of calcium sulphate fouling under sub-cooled flow boiling conditions. Applied Thermal Engineering, 81. pp. 18-27. ISSN 1359-4311

Halim, H. and Kaur, K. (2006) Malaysian web search engines: a critical analysis. Malaysian Journal of Library & Information Science, 11 (1). pp. 103-122. (Unpublished)

Hamdan, M.N. and Ramli, M.A. (2017) Konsep taghyir khalqillah menurut muhaddithin: Analisis terhadap hadith larangan al-wasl, al-washm, al-nams dan al-tafalluj. In: 4th International Conference on Sunnah Nabawiah IV (MUSNAD IV), 10-11 October 2017, Block A, Academy of Islamic Studies, University of Malaya.

Hamid, S. (2011) Making sense of the use of online social networking in higher education: An analysis of Empirical data using activity theory. In: 6th Mediterranean Conference on Information Systems, 03-05 Sep 2011, Cyprus.

Han, J. and Annuar, M.S.M. and Ariffin, M.F.K. and Gumel, A.M. and Ibrahim, S. and Heidelberg, T. and Bakar, B. and Hossain, A.B.M.S. and Sharifuddin, Y. (2011) Lipase-catalyzed synthesis of 6-o-d-glucosyldecanoate in tert-butanol: reaction optimization and effect of mixing power input. Biotechnology & Biotechnological Equipment, 25 (4). pp. 2642-2651. ISSN 1310-2818

Hanafiah, M. and Kasirun, Z.M. (2007) Using rule-based technique in developing the tool for finding suitable software methodology. Malaysian Journal of Computer Science, 20 (2). p. 209.

Haque, A. and Won, Y.S. and Haseeb, A.S. Md. Abdul and Masjuki, Haji Hassan (2010) Investigations on Zn-Al-Ge alloys as high temperature die attach material. In: Electronics System Integration Technologies Conference, 13-16 September 2010, Berlin, Germany.

Haris, H. and Anyi, C.L. and Muhammad, A.R. and Ahmad, F. and Nor, R.M. and Zulkepely, N.R. and Ali, N.M. and Harun, Sulaiman Wadi and Arof, Hamzah (2015) Performance of passively Q-switched ring erbium-doped fiber laser using a multiwalled carbon nanotubes polyethylene oxide (PEO) polymer composite-based saturable absorber. Microwave and Optical Technology Letters, 57 (8). pp. 1897-1901. ISSN 0895-2477

Hartomo, - and Taha, Z. and Hastutiningsih, E.D. (2009) Analysis of ergonomics workstation layout design using analytical hierarchy process. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)

Harun, Sulaiman Wadi and Lim, K.S. and Jasim, A.A. and Ahmad, Harith (2010) Fabrication of tapered fiber based ring resonator. Laser Physics, 20 (7). pp. 1629-1631. ISSN 1054-660X

Harun, Sulaiman Wadi and Paul, M.C. and Moghaddam, M.R.A. and Das, S. and Sen, R. and Dhar, A. and Pal, M. and Bhadra, S.K. and Ahmad, Harith (2010) Efficient diode pumped ytterbium-doped fibre laser. Electronics Letters, 46 (1). 68-U97. ISSN 0013-5194

Hasbullah, M. and Mamat, M.Z. and Ghaffar, M.A.A. (2018) Islamic revivalism and halal institutionalization: Tracking the influence of modern science and technology. In: International Halal Management Conference (IHMC 2018), 17-18 July 2018, Maldives National University, Male.

Hasbullah, M. and Sadri, R. and Shah, M.H. and Azizan, S.A. and Mohd Noor, S.N. (2014) Teaching the Islamic worldview of environmental ethics to students of science in Malaysia. In: Asian Bioethics Conference, 01-09 Nov 2014, Kumamoto, Japan.

Haseeb, A.S. Md. Abdul and Nishida, Tetsuaki and Masuda, Masataka and Hayashi, Yukio (2001) Mössbauer investigation on electrodeposited Fe-C and Fe-Ni-C alloys. Scripta Materialia, 44 (3). pp. 519-523. ISSN 1359-6462

Hashemi, S.S.G. and Bin Mahmud, H. and Ashraf, M.A. (2015) Performance of green roofs with respect to water quality and reduction of energy consumption in tropics: a review. Renewable & Sustainable Energy Reviews, 52. pp. 669-679. ISSN 1364-0321

Hashim, H.A. and Abdul Hamid, S.H. and Wan Rozali, W.A. (2007) A survey on mobile games usage among the Institute of Higher Learning (IHL) students in Malaysia. In: International Symposium on Information Technologies and Applications in Education, 23-25 Nov 2007, Kunming, China.

Hashim, S. and Omar, S.S.C. and Ibrahim, S.A. and Hassan, W.M.S.W. and Ung, N.M. and Mandiraji, G.A. and Bradley, D.A. and Alzimami, K. (2015) Thermoluminescence response of flat optical fiber subjected to 9 MeV electron irradiations. Radiation Physics and Chemistry, 106. pp. 46-49. ISSN 0969-806X

Hashimoto, S. and Ohmura, N. and Kim, S.J. and Ibrahim, S. (2012) Advances in mixing technology: recent advances in mixing research and development. International Journal of Chemical Engineering, 2012. pp. 1-2. ISSN 1687-8078

Hasikin, K. and Ibrahim, F. and Soin, N. (2008) Determination of design parameters of a biosensor for human artery pulse wave detection. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Hasikin, K. and Ibrahim, F. and Soin, N. (2008) Modeling of a micro-diaphragm biosensor for human artery pulse wave detection. In: 2008 IEEE International Conference on Semiconductor Electronics, ICSE 2008, 2008, Johor Bahru, Johor.

Hasikin, K. and Soin, N. and Ibrahim, F. (2010) Micro-diaphragm performance analysis for polyimide diaphragm. In: 2010 IEEE International Conference on Semiconductor Electronics, ICSE 2010, 2010, Melaka .

Hasikin, K. and Soin, N. and Ibrahim, F. (2009) Modeling of a polyimide diaphragm for an optical pulse pressure sensor. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.

Hasikin, K. and Soin, N. and Ibrahim, F. (2008) Modeling of an optical diaphragm for human pulse pressure detection. WSEAS Transactions on Electronics, 5 (11). pp. 447-456. ISSN 11099445 (ISSN)

Hassan, A. and Ibrahim, F. (2011) Development of a kidney teleultrasound consultation system. Journal of Digital Imaging, 24 (2). pp. 308-313. ISSN 08971889

Hassan, S.N. and Sani, Y.M. and Abdul Raman, A.A. and Sulaiman, N.M.N. and Daud, W.M.A.W. (2015) Biogasoline: An out-of-the-box solution to the food-for-fuel and land-use competitions. Energy Conversion and Management, 89. pp. 349-367. ISSN 0196-8904

Hayyan, A. and Hashim, M.A. and Hayyan, M. (2015) Application of a novel catalyst in the esterification of mixed industrial palm oil for biodiesel production. Bioenergy Research, 8 (1). pp. 459-463. ISSN 1939-1234

Hayyan, M. and Aissaoui, T. and Hashim, M.A. and AlSaadi, M.A. and Hayyan, A. (2015) Triethylene glycol based deep eutectic solvents and their physical properties. Journal of the Taiwan Institute of Chemical Engineers, 50. pp. 24-30. ISSN 1876-1070

Hayyan, M. and Hashim, M.A. and AlNashef, I.M. (2015) Kinetics of superoxide ion in dimethyl sulfoxide containing ionic liquids. Ionics, 21 (3). pp. 719-728. ISSN 0947-7047

Hazidah, N.A. and Edzan, N.N. and Mahbob, Y. and Hasmawati, I. (2012) UM in the news: Marketing and promotion on social media platforms. Jurnal Persatuan Pustakawan Malaysia, 6. pp. 1-10.

Hedges, L. and Morrant, D.S. and Campos-Arceiz, A. and Clements, G.R. (2015) Feasibility of using scent-baited hair traps to monitor carnivore populations in Peninsular Malaysia. Tropical Conservation Science, 8 (4). pp. 975-982. ISSN 1940-0829

Heng, L.C. and Al-Amin, A.Q. and Saidur, R. and Ward, T.A. (2015) Renewable energy choice: Cost and energy analysis of grid connected photovoltaic system in Malaysia. Environmental Progress & Sustainable Energy, 34 (3). pp. 866-880. ISSN 1944-7442

Hidayatul, A.B.Z. and Nahrizul, A.B.I.N.K. (2007) Development of wireless patient data management system. Journal of Sustainability Science and Management, 2. ISSN 1823-8556

Hidayatul, A.B.Z. and Nahrizul, A.B.I.N.K. (2007) Development of wireless patient data management system. Journal of Sustainability Science and Management, 2.

Hindia, M.N. and Reza, A.W. and Dakkak, O. and Awang Nor, S. and Noordin, K.A. (2014) Cloud computing applications and platforms: a survey. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.

Hindia, M.N. and Reza, A.W. and Noordin, K.A. (2015) A novel scheduling algorithm based on game theory and multicriteria decision making in LTE network. International Journal of Distributed Sensor Networks. p. 8. ISSN 1550-1329

Hindia, M.N. and Reza, A.W. and Noordin, K.A. and Chayon, M.H.R. (2015) A novel LTE scheduling algorithm for green technology in smart grid. PLoS ONE, 10 (4). p. 18. ISSN 1932-6203

Hisham, H.K. and Abas, A.F. and Mahdiraji, G.A. and Mahdi, M.A. and Adikan, Faisal Rafiq Mahamd (2015) Optimizing the external optical cavity parameters for performance improvement of a fiber grating fabry-perot laser. Optical Review, 22 (2). pp. 278-288. ISSN 1340-6000

Hizaddin, H.F. and Sarwono, M. and Hashim, M.A. and AlNashef, I.M. and Hadj-Kali, M.K. (2015) Coupling the capabilities of different complexing agents into deep eutectic solvents to enhance the separation of aromatics from aliphatics. The Journal of Chemical Thermodynamics, 84. pp. 67-75. ISSN 0021-9614

Hmood, A.K. and Jalab, H.A. and Kasirun, Z.M. and Zaidan, A.A. and Zaidan, B.B. (2010) On the capacity and security of steganography approaches: an overview. Journal of Applied Sciences, 10 (16). pp. 1825-1833. ISSN 1812-5654

Hmood, A.K. and Kasirun, Z.M. and Jalab, H.A. and Alam, G.M. and Zaidan, A.A. and Zaidan, B.B. (2010) On the accuracy of hiding information metrics: counterfeit protection for education and important certificates. International Journal of the Physical Sciences, 5 (7). pp. 1054-1062. ISSN 1992-1950

Hmood, J.K. and Emami, S.D. and Noordin, K.A. and Ahmad, Harith and Harun, Sulaiman Wadi and Shalaby, H.M.H. (2015) Optical frequency comb generation based on chirping of Mach-Zehnder modulators. Optics Communications, 344. pp. 139-146. ISSN 0030-4018

Homayounfar, M. and Zomorodian, M. and Martinez, C.J. and Lai, S.H. (2015) Two Monthly Continuous Dynamic Model Based on Nash Bargaining Theory for Conflict Resolution in Reservoir System. PLoS ONE, 10 (12). ISSN 1932-6203

Hoo, C.S. and Kanesan, J. and Ramiah, H. (2015) Cost reduction in bottom-up hierarchical-based VLSI floorplanning designs. International Journal of Circuit Theory and Applications, 43 (3). pp. 286-306. ISSN 0098-9886

Hoo, W.L. and Chan, C.S. (2015) Recognizing unknown objects with attributes relationship model. Expert Systems With Applications, 42 (23). pp. 9279-9283. ISSN 0957-4174

Hooman, K. and Sauret, E. and Dahari, M. (2015) Theoretical modelling of momentum transfer function of bi-disperse porous media. Applied Thermal Engineering, 75. pp. 867-870. ISSN 1359-4311

Hosen, M.A. and Jumaat, M.Z. and Islam, A.B.M.S. (2015) Inclusion of CFRP - epoxy composite for end anchorage in NSM-epoxy strengthened beams. Advances in Materials Science and Engineering. p. 10. ISSN 1687-8434

Hossain, A. and Choudhury, I.A. and Nahar, N. and Hossain, I. and Bin Mamat, A. (2015) Experimental and theoretical investigation of powder-binder mixing mechanism for metal injection molding. Materials and Manufacturing Processes, 30 (1). pp. 41-46. ISSN 1042-6914

Hossain, M.I. and Faruque, M.R.I. and Islam, M.T. and Ullah, M.H. (2015) A new wide-band double-negative metamaterial for C- and S-band applications. Materials, 8 (1). pp. 57-71. ISSN 1996-1944

Hossain, M.S. and Saidur, R. and Sabri, M.F.M. and Said, Z. and Hassani, S. (2015) Spotlight on available optical properties and models of nanofluids: A review. Renewable & Sustainable Energy Reviews, 43. pp. 750-762. ISSN 1364-0321

Hossain, S. and Masjuki, Haji Hassan and Varman, Mahendra and Kalam, M.A. and Rahman, S.M.A. (2015) Comparative evaluation of the blends of gas-to-liquid (GTL) fuels and biodiesels with diesel at high idling conditions: an in-depth analysis on engine performance and environment pollutants. RSC Advances, 5 (17). pp. 13068-13077. ISSN 2046-2069

Hosseini, S. and Azari, P. and Farahmand, E. and Gan, S.N. and Rothan, H.A. and Yusof, R. and Koole, L.H. and Djordjevic, I. and Ibrahim, F. (2015) Polymethacrylate coated electrospun PHB fibers: An exquisite outlook for fabrication of paper-based biosensors. Biosensors and Bioelectronics, 69. pp. 257-264. ISSN 0956-5663

Hosseini, S. and Ibrahim, F. and Rothan, H.A. and Yusof, R. and van der Marel, C. and Djordjevic, I. and Koole, L.H. (2015) Aging effect and antibody immobilization on -COOH exposed surfaces designed for dengue virus detection. Biochemical Engineering Journal, 99. pp. 183-192. ISSN 1369-703X

Hosseini, S. and Mahmud, N.H.M.E. and Yahya, R.B. and Ibrahim, F. and Djordjevic, I. (2015) Polypyrrole conducting polymer and its application in removal of copper ions from aqueous solution. Materials Letters, 149. pp. 77-80. ISSN 0167-577X

Hourmand, M. and Farahany, S. and Sarhan, A.A.D. and Noordin, M.Y. (2015) Investigating the electrical discharge machining (EDM) parameter effects on Al-Mg2Si metal matrix composite (MMC) for high material removal rate (MRR) and less EWR–RSM approach. The International Journal of Advanced Manufacturing Technology, 77 (5-8). pp. 831-838. ISSN 0268-3768

Huang, S.L. and Yin, C.Y. and Yap, S.Y. (2010) Particle size and metals concentrations of dust from a paint manufacturing plant. Journal of Hazardous Materials, 174 (1-3). pp. 839-842.

Huda, Z. and Zaharinie, T. and Min, G.J. (2010) Temperature effects on material behavior of aerospace aluminum alloys for subsonic and supersonic aircraft. Journal of Aerospace Engineering, 23 (2). pp. 124-128.

Hussain, M. and Abdul Wahab, A.W. and Anuar, N.B. and Salleh, R. and Md Noor, R. (2015) Pixel value differencing steganography techniques: Analysis and open challenge. In: IEEE International Conference on Consumer Electric, 06-08 June 2015, Taiwan, China. (Submitted)

I

Ibrahim, A.A.A. and Salim, S.S. (2004) Designing software for child users: a case study of a web page construction kit for children. Malaysian Journal of Computer Science, 17 (1). pp. 32-41. ISSN 0127-9084

Ibrahim, F. and Ahmad, S.A. (2012) Assessment of upper body muscle activity during salat and stretching exercise: a pilot study. In: IEEE-EMBS International Conference on Biomedical and Health Informatics, BHI 2012. In Conj. with the 8th Int. Symp.on Medical Devices and Biosensors and the 7th Int. Symp. on Biomedical and Health Engineering, 2012, Hong Kong and Shenzhen.

Ibrahim, F. and Ahmad, S.A. (2012) Investigation of electromyographic activity during Salat and stretching exercise. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Ibrahim, F. and Ahmad, S.A. and Woo, P.J. and Wan, W.A.B.A. (2012) Biomechanical response of the upper body during prostration in salat and the child's pose: a preliminary study. Journal of Physical Therapy Science, 24 (10). pp. 1021-1024. ISSN 0915-5287

Ibrahim, F. and Ahmad, W.A.W. (2008) Study of heart rate changes in different salat's positions. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Ibrahim, F. and Arifin, N. and Rahim, Z.H.A. (2013) Effect of orofacial myofunctional exercise using an oral rehabilitation tool on labial closure strength, tongue elevation strength and skin elasticity. Journal of Physical Therapy Science, 25 (1). pp. 11-14. ISSN 0915-5287

Ibrahim, F. and Basheer Ali, J. and Jaais, F. and Nasir Taib, M. (2001) Expert system for early diagnosis of eye diseases infecting the Malaysian population. In: IEEE Region 10 International Conference on Electrical and Electronic Technology, 2001, Singapore.

Ibrahim, F. and Chae, J.H. and Arifin, N. and Zarmani, N.M. and Cho, J. (2007) EMG analysis of facial muscles exercise using oral cavity rehabilitative device. In: 2006 IEEE Region 10 Conference, TENCON 2006, 2007, Hong Kong.

Ibrahim, F. and Faisal, T. and Mohamad Salim, M.I. and Taib, M.N. (2010) Non-invasive diagnosis of risk in dengue patients using bioelectrical impedance analysis and artificial neural network. Medical and Biological Engineering and Computing, 48 (11). pp. 1141-1148. ISSN 0140-0118

Ibrahim, F. and Ismail, N.A. and Taib, M.N. and Wan Abas, W.A.B. (2004) Modeling of hemoglobin in dengue fever and dengue hemorrhagic fever using bioelectrical impedance. Physiological Measurement, 25 (3). pp. 607-615. ISSN 1361-6579

Ibrahim, F. and Ismail, N.A. and Taib, M.N. and Wan Abas, W.A.B. (2004) Modeling of hemoglobin in dengue fever and dengue hemorrhagic fever using bioelectrical impedance. Physiological Measurement, 25 (3). pp. 607-615. ISSN 0967-3334

Ibrahim, F. and Jahanshahi, P. and Abd Rahman, N. and Abdul Kahar, M.K.B. and Madou, M. and Nozari, A.A. and Soin, N. and Md Dawal, S.Z. and Abi Samra, K. (2010) Analysis and experiment of centrifugal force for microfluidic ELISA CD platform. In: 2010 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2010, 2010, Kuala Lumpur.

Ibrahim, F. and Taib, M.N. and Wan Abas, W.A.B. and Guan, C.C. and Sulaiman, S. (2005) A novel approach to classify risk in dengue hemorrhagic fever (DHF) using bioelectrical impedance analysis (BIA). IEEE Transactions on Instrumentation and Measurement, 54 (1). pp. 237-244. ISSN 0018-9456

Ibrahim, F. and Taib, M.N. and Wan Abas, W.A.B. and Guan, C.C. and Sulaiman, S. (2005) A novel dengue fever (DF) and dengue haemorrhagic fever (DHF) analysis using artificial neural network (ANN). Computer Methods and Programs in Biomedicine, 79 (3). pp. 273-281. ISSN 01692607

Ibrahim, F. and Thio, T.H.G. and Faisal, T. and Neuman, M. (2015) The application of biomedical engineering techniques to the diagnosis and management of tropical diseases: A review. Sensors, 15 (3). pp. 6947-6995. ISSN 1424-8220

Ibrahim, F. and Tiong, C.K. and Ismail, N.A. and Taib, M.N. (2005) Analysis of mass distribution in dengue patients using bioelectrical impedance. In: 2005 Asian Conference on Sensors and the International Conference on new Techniques in Pharmaceutical and Biomedical Research, 2005, Kuala Lumpur.

Ibrahim, F. and Wan Abas, W.A.B. and Taib, M.N. and Guan, C.C. and Sulaiman, S. (2007) A new approach to classify risk in dengue infection using bioelectrical impedance analysis. Dengue Bulletin, 31. pp. 58-74. ISSN 1020895X

Ibrahim, Fatimah and Ooi, K.F. and Ismail, N.A. and Taib, M.N. and Wan Abas, Wan Abu Bakar (2005) Analysis of water compartment in dengue patients. In: 2005 27th Annual International Conference of the Engineering in Medicine and Biology Society, IEEE-EMBS 2005, 2005, Shanghai.

Ibrahim, Fatimah and Ooi, K.F. and Ismail, N.A. and Taib, M.N. and Wan Abas, Wan Abu Bakar (2005) Analysis of water compartment in dengue patients. In: 2005 27th Annual International Conference of the Engineering in Medicine and Biology Society, IEEE-EMBS 2005, 2005, Shanghai.

Ibrahim, Fatimah and Wan Abas, Wan Abu Bakar and Taib, M.N. (2004) Analysis of bioelectrical tissue conductivity in Malaysian adults. In: IEEE TENCON 2004 - 2004 IEEE Region 10 Conference: Analog and Digital Techniques in Electrical Engineering, 2004, Chiang Mai.

Ibrahim, I. and Ibrahim, Z. and Ahmad, Hamzah and Jusof, M.F.M. and Yusof, Z.M. and Nawawi, S.W. and Mubin, M. (2015) An assembly sequence planning approach with a rule-based multi-state gravitational search algorithm. International Journal of Advanced Manufacturing Technology, 79 (5-8). pp. 1363-1376. ISSN 0268-3768

Ibrahim, M.N.M. and Ibrahim, F. and Razack, A.H. (2008) Web based online diagnosis for erectile dysfunction using International Index of Erectile Function (IIEF). In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Ibrahim, N.J. and Mohd Yusoff, M.Y.Z. and Razak, Z. and Raja Yusof, R.J. (2012) Mobile application of Quran and Arabic language for interactive and self learning assistant: A review. In: The 2nd Annual International Qur'anic Conference 2012, 22-23 Feb 2012, University of Malaya.

Ibrahim, S. and Jasnin, S.N. and Wong, S.D. and Baker, I.F. (2012) Zwietering's equation for the suspension of porous particles and the use of curved blade impellers. International Journal of Chemical Engineering, 2012. pp. 1-13. ISSN 1687-8078

Ibrahim, S. and Nienow, A.W. (1999) Comparing impeller performance for solid-suspension in the transitional flow regime with Newtonian fluids. Chemical Engineering Research & Design, 77 (A8). pp. 721-727. ISSN 0263-8762

Ibrahim, S. and Nienow, A.W. (1996) Particle suspension in the turbulent regime: the effect of impeller type and impeller/vessel configuration. Chemical Engineering Research & Design, 74 (A6). pp. 679-688. ISSN 0263-8762

Ibrahim, S. and Nienow, A.W. (1995) Power curves and flow patterns for a range of impellers in Newtonian fluids: 40<Re<5×10(5). Chemical Engineering Research and Design, 73 (A5). pp. 485-491. ISSN 0263-8762

Ibrahim, S. and Nienow, A.W. (2004) Suspension of microcarriers for cell culture with axial flow impellers. Chemical Engineering Research & Design, 82 (A9). pp. 1082-1088. ISSN 0263-8762

Ibrahim, S. and Nienow, A.W. (2010) The effect of viscosity on particle suspension in an aerated stirred vessel with different impellers and bases. Chemical Engineering Communications, 197 (4). pp. 434-454. ISSN 0098-6445

Ibrahim, S. and Vikineswary, S. and Al-Azad, S. and Chong, L.L. (2006) The effects of light intensity, inoculum size, and cell immobilisation on the treatment of sago effluent with Rhodopseudomonas palustris strain B1. Biotechnology and Bioprocess Engineering, 11 (5). pp. 377-381. ISSN 1226-8372

Idris, N. and Baba, S. and Abdullah, R. (2011) IDENTIFYING STUDENTS'SUMMARY WRITING STRATEGIES USING SUMMARY SENTENCE DECOMPOSITION ALGORITHM. Malaysian Journal of Computer Science, 24 (4). pp. 180-194.

Idris, N. and Baba, S. and Abdullah, R. (2011) Identifying Students' Summary Writing Strategies Using Summary Sentence Decomposition Algorithm. Malaysian Journal of Computer Science, 24 (4). pp. 180-194. ISSN 0127-9084

Idris, N. and Baba, S. and Abdullah, R. (2009) A Summary Sentence Decomposition Algorithm for Summarizing Strategies Identification. Computer and Information Science, 2 (1). pp. 200-210. ISSN 1913-8997

Idris, N. and Baba, S. and Abdullah, R. (2008) Using Heuristic Rules from Sentence Decomposition of Experts' Summaries to Detect Students' Summarizing Strategies. International Journal of Human and Social Sciences, 2 (1). pp. 347-351.

Idris, N. and Loh, S.C. and Mohd Nor, N. (2008) Classroom assessment system for teaching and learning (CASTLe). In: Conference on Research in Education 2008 , 22-23 Dec 2008, Auditorium Perdanasiswa, UM.

Idris, N. and Mohd Sapiyan, B. and Abdullah, R. (2008) An Algorithm for Summarizing Strategies Identification. Asia-Pacific Society for Computers in Education.

Ijam, A. and Saidur, R. and Ganesan, P. and Golsheikh, A.M. (2015) Stability, therrno-physical properties, and electrical conductivity of graphene oxide-deionized water/ethylene glycol based nanofluid. International Journal of Heat and Mass Transfer, 87. pp. 92-103. ISSN 0017-9310

Ilham, Z. (2015) Green Energy towards Sustainability from the Islamic Perspective / Nur Hidayah Abdul Jabar, Zul Ilham, Shaikh Mohd Saifuddeen and Noor Naemah Abdul Rahman. International Journal of Sustainable Future for Human Security, 3 (2). pp. 31-34. ISSN 2187 - 4506

Illias, H.A. and Chai, X.R. and Abu Bakar, A.H. and Mokhlis, H. (2015) Transformer incipient fault prediction using combined artificial neural network and various particle swarm optimisation techniques. PLoS ONE, 10 (6). p. 16. ISSN 1932-6203

Imran, M. and Lim, S.F.E. and Putra, I.S. and Ariffin, A.K. and Tan, C.J. and Purbolaksono, J. (2015) Assessment of a planar inclusion in a solid cylinder. Engineering Failure Analysis, 48. pp. 236-246. ISSN 1350-6307

Imtenan, S. and Masjuki, Haji Hassan and Varman, M. and Fattah, I.M.R. (2015) Evaluation of n-butanol as an oxygenated additive to improve combustion-emission-performance characteristics of a diesel engine fuelled with a diesel-calophyllum inophyllum biodiesel blend. RSC Advances, 5 (22). pp. 17160-17170. ISSN 2046-2069

Imtenan, S. and Masjuki, Haji Hassan and Varman, M. and Fattah, I.M.R. and Sajjad, H. and Arbab, M.I. (2015) Effect of n-butanol and diethyl ether as oxygenated additives on combustion-emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel-jatropha biodiesel blend. Energy Conversion and Management, 94. pp. 84-94. ISSN 0196-8904

Imtenan, S. and Rahman, S.M.A. and Masjuki, Haji Hassan and Varman, M. and Kalam, M.A. (2015) Effect of dynamic injection pressure on performance, emission and combustion characteristics of a compression ignition engine. Renewable & Sustainable Energy Reviews, 52. pp. 1205-1211. ISSN 1364-0321

Iqbal, Md. Arbab and Varman, Mahendra and Masjuki, Haji Hassan and Kalam, M.A. and Hossain, Sajjad and Sayeed, Imtenan (2015) Tailoring fuel properties using jatropha, palm and coconut biodiesel to improve CI engine performance and emission characteristics. Journal of Cleaner Production, 101. pp. 262-270. ISSN 0959-6526

Irawati, Ninik and Suthaskumar, M. and John, V. and Ali, N.M. and Ahmad, Harith and Harun, Sulaiman Wadi (2015) Fabrication of polymer microfiber by direct drawing. Microwave and Optical Technology Letters, 57 (4). pp. 820-823. ISSN 0895-2477

Islam, A. and Alengaram, U.J. and Jumaat, M.Z. and Bashar, I.I. and Kabir, S.M.A. (2015) Engineering properties and carbon footprint of ground granulated blast-furnace slag-palm oil fuel ash-based structural geopolymer concrete. Construction and Building Materials, 101 (1). pp. 503-521. ISSN 0950-0618

Islam, M. and Mekhilef, S. (2015) H6-type transformerless single-phase inverter for grid-tied photovoltaic system. IET Power Electronics, 8 (4). pp. 636-644. ISSN 1755-4543

Islam, M. and Mekhilef, S. and Hasan, M. (2015) Single phase transformerless inverter topologies for grid-tied photovoltaic system: A review. Renewable & Sustainable Energy Reviews, 45. pp. 69-86. ISSN 1364-0321

Islam, M.D. and Reza, C.M.F.S. and Mekhilef, S. (2015) Modeling and experimental validation of 5-level hybrid H-bridge multilevel inverter fed DTC-IM drive. Journal of Electrical Engineering & Technology, 10 (2). pp. 574-585. ISSN 1975-0102

Islam, M.J. and Reza, A.W. and Noordin, K.A. and Dimyati, K. and Kausar, A.M.Z. (2015) An accelerated and accurate three-dimensional ray tracing using red-black tree with facet mining and object bouncing techniques. Turkish Journal of Electrical Engineering and Computer Sciences, 23 (2). pp. 580-588. ISSN 1300-0632

Islam, M.T. and Ahsan, M.R. and Ullah, M.H. (2015) A new biopolymer substrate-based compact monopole antenna covering RFID, WiMAX, and C/X-band. Microwave and Optical Technology Letters, 57 (9). pp. 2002-2005. ISSN 0895-2477

Islam, M.T. and Ganesan, P. and Cheng, J. (2015) A pair of bubbles' rising dynamics in a xanthan gum solution: a CFD study. RSC Advances, 5 (11). pp. 7819-7831. ISSN 2046-2069

Ismail, M. and Yaacob, M. and Abdulkareem, S. and Nasaruddin, F. and Abdullah, N. (2012) Support system for novice researchers (SSNR): usability evaluation of the first use. The International Arab Journal of Information Technology, 9 (4). pp. 361-367.

Ismail, M.A. and Kareem, S.A. (2011) Identifying how novice researchers search, locate, choose and use web resources at the early stage of research. Malaysian Journal of Library & Information Science, 16 (3). pp. 67-85.

Ismail, M.A. and Md-Noor, R. and Othman, M. (2004) Short message service (SMS) and its applications. Mobile Commerce Applications. pp. 179-202.

Ismail, M.S. and Moghavvemi, M. and Mahlia, T.M.I. and Muttaqi, K.M. and Moghavvemi, S. (2015) Effective utilization of excess energy in standalone hybrid renewable energy systems for improving comfort ability and reducing cost of energy: A review and analysis. Renewable & Sustainable Energy Reviews, 42. pp. 726-734. ISSN 1364-0321

Ismail, M.S. and Purbolaksono, J. and Andriyana, A. and Tan, C.J. and Muhammad, N. and Liew, H.L. (2015) The use of initial imperfection approach in design process and buckling failure evaluation of axially compressed composite cylindrical shells. Engineering Failure Analysis, 51. pp. 20-28. ISSN 1350-6307

Ismail, N.A. and Annuar, M.S.M. and Ibrahim, S. (2011) Dye decolorization by immobilized laccase: statistical optimization and effect of impeller geometry. International Journal of Chemical Reactor Engineering, 9. ISSN 1542-6580

Ismail, N.A. and Bagheri, S. (2017) Lube Oil Wear Reduction via Organic Tribofilms. Lubricants, 5 (3). p. 30. ISSN 2075-4442

Ismail, Z. and Othman, S.Z. and Law, K.H. and Sulaiman, A.H. and Hashim, R. (2015) Comparative performance of water hyacinth (Eichhornia crassipes) and water lettuce (Pista stratiotes) in preventing nutrients build-up in municipal wastewater. Clean-Soil Air Water, 43 (4). pp. 521-531. ISSN 1863-0650

Iwahashi, M. and Yoshida, T. and Mokhtar, N.B. and Kiya, H. (2015) Bit-depth scalable lossless coding for high dynamic range images. Eurasip Journal on Advances in Signal Processing. pp. 1-15. ISSN 1687-6180

J

Jafarlou, D.M. and Zalnezhad, E. and Hamouda, A.S. and Faraji, G. and Bin Mardi, N.A. and Mohamed, M.A.H. (2015) Evaluation of the mechanical properties of AA 6063 processed by severe plastic deformation. Metallurgical and Materials Transactions A, 46A (5). pp. 2172-2184. ISSN 1073-5623

Jahangirzadeh, A. and Akib, S. (2015) Experimental study for determination of collar dimensions around bridge pier. Baltic Journal of Road and Bridge Engineering, 10 (1). pp. 89-96. ISSN 1822-427X

Jahanirad, M. and Yahya, A.L.N. and Noor, R.M. (2012) Comprehensive network security approach: security breaches at retail company-a case study. International Journal of Computer Science and Network Security, 12 (8). p. 107.

Jahanirad, M. and Yahya, A.L.N. and Noor, R.M. (2011) Security measures for VoIP application: a state of the art review. Scientific Research and Essays, 6 (23). pp. 4950-4959. ISSN 1992-2248

Jahanshahi, P. and Md Dawal, S.Z. and Ibrahim, F. and Nozari, A.A. and Soin, N. (2010) Development of a low-cost and portable device controller for point-of-care medical diagnostics. In: 2010 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2010, 2010, Kuala Lumpur.

Jahirul, M.I. and Saidur, Rahman and Masjuki, Haji Hassan and Ahmed, S. and Kalam, M.A. (2007) Environmental effects of conversion of petroleum fuel-based motor cars to natural gas vehicles (NGVs). International journal of Mechanical and Materials Engineering. pp. 35-43.

Jamaludin, J. and Abd Rahim, N. and Ping, H.W. (2015) Multilevel voltage source inverter with optimised usage of bidirectional switches. IET Power Electronics, 8 (3). pp. 378-390. ISSN 1755-4543

Jamian, J.J. and Mustafa, M.W. and Mokhlis, H. (2015) Optimal multiple distributed generation output through rank evolutionary particle swarm optimization. Neurocomputing, 152. pp. 190-198. ISSN 0925-2312

Jamil, Z. and Annuar, M.S.M. and Ibrahim, S. and Vikineswary, S. (2012) Kinetic modeling of batch photofermentation hydrogen gas production by Rhodopseudomonas palustris PBUM001. Journal of Renewable and Sustainable Energy, 4 (4). ISSN 1941-7012

Jamil, Z. and Mohamad Annuar, M.S. and Ibrahim, S. and Vikineswary, S. (2009) Optimization of phototrophic hydrogen production by Rhodopseudomonas palustris PBUM001 via statistical experimental design. International Journal of Hydrogen Energy, 34 (17). pp. 7502-7512. ISSN 0360-3199

Jamil, Z. and Yunus, N.A.M. and Suffian, M. and Ibrahim, S. (2013) Anaerobic co-digestion of food waste for biohydrogen production. In: 2013 IEEE Business Engineering and Industrial Applications Colloquium, BEIAC 2013, 2013, Langkawi.

Jayatissa , B. and Edzan, N.N. (2002) Information marketing in Sri Lankan academic libraries. Malaysian Journal of Library & Information Science, 7 (2). pp. 87-100.

Jeirani, Z. and Mohamed Jan, B. and Noor, I.M. and See, C.H. and Saphanuchart, W. (2013) The Effect of Polymer on Triglyceride Microemulsion Formulation for Tertiary Oil Recovery. Industrial and Engineering Chemistry Research, 52 (44). pp. 15589-15593. ISSN 0888-5885

Jeirani, Z. and Mohamed Jan, B. and Si Ali, B. and Noor, I.M. and See, C.H. and Saphanuchart, W. (2013) Correlations between interfacial tension and cumulative tertiary oil recovery in a triglyceride microemulsion flooding. Journal of Industrial and Engineering Chemistry, 19 (4). pp. 1310-1314. ISSN 1226-086X

Jeirani, Z. and Mohamed Jan, B. and Si Ali, B. and Noor, I.M. and See, C.H. and Saphanuchart, W. (2013) Formulation and phase behavior study of a nonionic triglyceride microemulsion to increase hydrocarbon production. Industrial Crops and Products, 43. pp. 15-24. ISSN 0926-6690

Jeirani, Z. and Mohamed Jan, B. and Si Ali, B. and Noor, I.M. and See, C.H. and Saphanuchart, W. (2013) Formulation, optimization and application of triglyceride microemulsion in enhanced oil recovery. Industrial Crops and Products, 43. pp. 6-14. ISSN 0926-6690

Jeirani, Z. and Mohamed Jan, B. and Si Ali, B. and Noor, I.M. and See, C.H. and Saphanuchart, W. (2013) Prediction of Phase-Inversion Temperature of a Triglyceride Microemulsion Using Design of Experiments. Industrial & Engineering Chemistry Research, 52 (2). pp. 744-750. ISSN 0888-5885

Jeirani, Z. and Mohamed Jan, B. and Si Ali, B. and Noor, I.M. and See, C.H. and Saphanuchart, W. (2013) Prediction of the optimum aqueous phase composition of a triglyceride microemulsion using response surface methodology. Journal of Industrial and Engineering Chemistry, 19 (4). pp. 1304-1309. ISSN 1226-086X

Jeirani, Z. and Mohamed Jan, B. and Si Ali, B. and Noor, I.M. and See, C.H. and Saphanuchart, W. (2013) Prediction of water and oil percolation thresholds of a microemulsion by modeling of dynamic viscosity using response surface methodology. Journal of Industrial and Engineering Chemistry, 19 (2). pp. 554-560. ISSN 1226-086X

Jeirani, Z. and Mohamed Jan, B. and Si Ali, B. and Noor, I.M. and See, C.H. and Saphanuchart, W. (2012) The optimal mixture design of experiments: Alternative method in optimizing the aqueous phase composition of a microemulsion. Chemometrics and Intelligent Laboratory Systems, 112. pp. 1-7. ISSN 0169-7439

Jeong, J.H. and Din, N.C. and Otsuru, T. and Kim, H.C. (2010) An application of a noise maps for construction and road traffic noise in Korea. International Journal of The Physical Sciences, 5 (7). pp. 1063-1073.

Jeyabalan, V. and Samraj, A. and Kiong, L.C. (2008) Motor imaginary signal classification using adaptive recursive bandpass filter and adaptive autoregressive models for brain machine interface designs. International Journal of Biological and Medical Sciences, 3 (4). pp. 231-238.

Jeyabalan, V. and Samraj, A. and Loo, C.K. (2010) Motor imaginary-based brain machine interface design using programmable logic controllers for the disabled. Computer Methods in Biomechanics and Biomedical Engineering, 13 (5). pp. 617-623. ISSN 1025-5842

Joshi, A. and Ismail, S. and Taqa, A. and Ng, L.S. (2011) High performance system for the interactive rendering of a 3D model into MPEG-4. International Journal of Advanced Engineering Sciences and Technologies, 4 (2). pp. 54-58. ISSN 2230-7818

Jumaat, M.Z. and Alengaram, U.J. and Ahmmad, R. and Bahri, S. and Islam, A.B.M.S. (2015) Characteristics of palm oil clinker as replacement for oil palm shell in lightweight concrete subjected to elevated temperature. Construction And Building Materials, 101 (1). pp. 942-951. ISSN 0950-0618

Jung, C. and Phal, N. and Oh, J. and Chu, K.H. and Jang, M. and Yoon, Y. (2015) Removal of humic and tannic acids by adsorption-coagulation combined systems with activated biochar. Journal of Hazardous Materials, 300. pp. 808-814. ISSN 0304-3894

K

Kabir, S.M.A. and Alengaram, U.J. and Jumaat, M.Z. and Sharmin, A. and Islam, A. (2015) Influence of molarity and chemical composition on the development of compressive strength in POFA based geopolymer mortar. Advances in Materials Science and Engineering. p. 15. ISSN 1687-8434

Kadri, N.A. and Ahamad, A.R. and Abdul-Latip, E.N. and Azlan, C.A. and Raha, M.G. and Mohd-Nasir, N.F. (2007) Temperature modeling of therapeutic ultrasound: a preliminary finding. Biomeds. pp. 594-597.

Kadri, N.A. and Hoettges, K.F. and Hughes, M.P. (2008) Microelectrode fabrication using Indium Tin Oxide (ITO) for microfluidic devices employing dielectrophoresis. Biomeds, 21 IFM. pp. 719-722. ISSN 16800737 (ISSN)

Kadri, N.A. and Ng, K.H. (2010) BIIJ embracing social media. Biomedical Imaging and Intervention Journal, 6 (1). ISSN 18235530 (ISSN)

Kadri, N.A. and Raha, M.G. (2006) Creating animated medical images (Part 1). Biomedical Imaging and Intervention Journal, 2 (2).

Kadri, N.A. and Raha, M.G. (2006) Creating animated medical images (Part 2). Biomedical Imaging and Intervention Journal, 2 (3). ISSN 1823-5530

Kadri, N.A. and Raha, M.G. and Abu Osman, N.A. and Wan Abas, Wan Abu Bakar (2008) The first decade of biomedical engineering degree program at the University of Malaya: experiences and achievements. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Kadri, N.A. and Raha, M.G. and Murphy, B.P. (2011) Polyvinyl alcohol as a viable membrane in artificial tissue design and development. Clinics, 66 (8). pp. 1489-1493. ISSN 18075932 (ISSN)

Kadri, N.A. and Razak, M.A.A. and Ibrahim, F. (2012) Near real-time electrochemical analysis of carcinogenic cell lines using planar microelectrodes. International Journal of Electrochemical Science, 7 (6). pp. 5633-5642. ISSN 1452-3981

Kadri, N.A. and Razak, M.A.A. and Ibrahim, F. (2012) Near real-time electrochemical analysis of carcinogenic cell lines using planar microelectrodes. International Journal of Electrochemical Science, 7 (6). pp. 5633-5642. ISSN 14523981

Kadri, N.A. and Tan, L.K. and Ng, K.H. (2009) Riding on the crest of electronic publishing wave. Biomedical Imaging and Intervention Journal, 5 (1). ISSN 18235530 (ISSN)

Kahourzade, S. and Mahmoudi, A. and Bin Mokhlis, H. (2015) A comparative study of multi-objective optimal power flow based on particle swarm, evolutionary programming, and genetic algorithm. Electrical Engineering, 97 (1). pp. 1-12. ISSN 0948-7921

Kalwar, Kafeel Ahmed and Aamir, Muhammad and Mekhilef, Saad (2015) Inductively coupled power transfer (ICPT) for electric vehicle charging - A review. Renewable & Sustainable Energy Reviews, 47. pp. 462-475. ISSN 1364-0321

Kamaralzaman, S. and Kaur, K. (2009) Quality management of reference services in Malaysian public university libraries. Libri, 59 (2). pp. 104-113. ISSN 1865-8423

Kamil, N.S.M. and Dawal, S.Z.M. (2015) Effect of postural angle on back muscle activities in aging female workers performing computer tasks. Journal of Physical Therapy Science, 27 (6). pp. 1967-1970. ISSN 0915-5287

Kanadasan, J. and Razak, H.A. (2015) Engineering and sustainability performance of self-compacting palm oil mill incinerated waste concrete. Journal of Cleaner Production, 89. pp. 78-86. ISSN 0959-6526

Kanagasabi, S. and Kang, Y.L. and Manickam, M. and Ibrahim, S. and Pichiah, S. (2013) Intimate coupling of electro and biooxidation of tannery wastewater. Desalination and Water Treatment, 51 (34-36). pp. 6617-6623. ISSN 1944-3994

Kang, K. and Jang, M. and Cui, M. and Qiu, P. and Na, S. and Son, Y. and Khim, J. (2015) Enhanced sonocatalytic treatment of ibuprofen by mechanical mixing and reusable magnetic core titanium dioxide. Chemical Engineering Journal, 264. pp. 522-530. ISSN 1385-8947

Kang, Y.L. and Poon, M.Y. and Monash, P. and Ibrahim, S. and Saravanan, P. (2013) Surface chemistry and adsorption mechanism of cadmium ion on activated carbon derived from Garcinia mangostana shell. Korean Journal of Chemical Engineering, 30 (10). pp. 1904-1910. ISSN 0256-1115

Kang, Y.L. and Toh, S.K.S. and Monash, P. and Ibrahim, S. and Saravanan, P. (2013) Adsorption isotherm, kinetic and thermodynamic studies of activated carbon prepared from Garcinia mangostana shell. Asia-Pacific Journal of Chemical Engineering, 8 (6). pp. 811-818. ISSN 1932-2135

Kareem, S.A. and Raviraja, S. and Awadh, N.A. and Kamaruzaman, A. and Kajindran, A. (2010) Classification and regression tree in prediction of survival of AIDS patients. Malaysian Journal of Computer Science, 23 (3). pp. 153-165.

Karim, M.E. and Munir, A. and Reza, A.W. and Muhammad-Sukki, F. and Yasin, S.H.M. and Abu-Bakar, S.H. and Rahim, R.A. (2015) Too enthusiastic to care for safety: Present status and recent developments of nanosafety in ASEAN countries. Technological Forecasting and Social Change, 92. pp. 168-181. ISSN 0040-1625

Karim, M.R. and SaifizuI, A.A. and Yamanaka, H. (2014) The effect of gross vehicle weight on platoon speed and size characteristics on two-lane road. In: International Conference on Innovative Trends in Multidisciplinary Academic Research, 20 – 21 October 2014, Istanbul, Turkey.

Karman, S. and Hasikin, K. and Ting, H.N. and Ng, S.C. and Abdul Wahab, A.K. and Lim, E. and Hamzaid, N.A. and Wan Abas, Wan Abu Bakar (2011) OBE implementation and design of continual quality improvement (CQI) for accreditation of biomedical engineering program University of Malaya. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Kasirun, Z.M. (2005) A Survey on the requirements elicitation practices among courseware developers. Malaysian Journal of Computer Science, 18 (1). pp. 70-77.

Kasirun, Z.M. and Amirudin, B. (2000) ISAT903, an assessment tool on the quality system for software industry. Malaysian Journal of Computer Science, 13 (1). pp. 34-47.

Kasirun, Z.M. and Salim, S.S. (2008) Assessing the needs of CSCL tool and its impacts in Malaysian context. WSEAS Transactions on Computer Research, 3 (5). pp. 300-310. ISSN 1991-8755

Kasirun, Z.M. and Salim, S.S. (2004) Potential of computer-supported collaborative learning application use in Malaysian schools. The International Arab Journal of Information Technology, 1 (2). pp. 187-195.

Kasirun, Z.M. and Salim, S.S. (2002) A survey on requirements elicitation for computer-supported collaborative learning (cscl) application development among software developers - a Malaysian perspective. International Journal of Information Technology, 3. pp. 89-102.

Kasman, M. and Ibrahim, S. (2010) Application of response surface methodology in optimization of cadmium adsorption by raw rice husk. In: 2010 International Conference on Environmental and Agriculture Engineering, ICEAE 2010, 2010, Kyoto.

Katiyar, P. and Mahadi, W.N.L.W. (2015) Impact analysis on distance variation between patch antenna and metamaterial. Microwave and Optical Technology Letters, 57 (1). pp. 178-183. ISSN 0895-2477

Katiyar, P.R. and Mahadi, W.N.L.B.W. (2015) Gain improvement of microstrip patch antenna using CLS split ring resonator metamaterial. Frequenz, 69 (3-4). pp. 95-103. ISSN 0016-1136

Kaur, K. (2000) Citation analysis of journal of natural rubber research, 1988-1997. Malaysian Journal of Library & Information Science, 5 (2). pp. 45-56.

Kaur, K. (2009) Marketing the academic library on the web. Library Management, 30 (6/7). pp. 454-468. ISSN 0143-5124

Kaur, K. and Ali, H. (2015) Examining children as web users: Methodological considerations. In: International Conference on Qualitative and Quantitative Methods in Libraries , 26-29 May 2015, Paris, France. (Submitted)

Kaur, K. and Diljit, S. (2011) Antecedents of customer loyalty: Does service quality suffice? Malaysian Journal of Library & Information Science, 16 (2). ISSN 1394-6234

Kaur, W. and Vimala, B. (2016) Sentiment analysis technique: A look into support vector machine and naive bayes. In: International Conference on IT, Mechanical & Communication Engineering (ICIME 2016), 02-03 January 2016, Pattaya, Thailand.

Kaviani, S. and Hassanli, A.M. and Homayounfar, M. (2015) Optimal crop water allocation based on constraint-state method and nonnormal stochastic variable. Water Resources Management, 29 (4). pp. 1003-1018. ISSN 0920-4741

Kazemzadeh, A. and Ganesan, P. and Ibrahim, F. and He, S. and Madou, M.J. (2013) The effect of contact angles and capillary dimensions on the burst frequency of super hydrophilic and hydrophilic centrifugal microfluidic platforms, a CFD study. PLoS ONE, 8 (9). pp. 1-12. ISSN 19326203

Kazemzadeh, A. and Ganesan, P. and Ibrahim, F. and Kulinsky, L. and Madou, M.J. (2015) Guided routing on spinning microfluidic platforms. RSC Advances, 5 (12). pp. 8669-8679. ISSN 2046-2069

Kazi, S.N. and Badarudin, A. and Zubir, M.N.M. and Ming, H.N. and Misran, M. and Sadeghinezhad, E. and Mehrali, M. and Syuhada, N.I. (2015) Investigation on the use of graphene oxide as novel surfactant to stabilize weakly charged graphene nanoplatelets. Nanoscale Research Letters, 10. p. 15. ISSN 1556-276X

Kazi, S.N. and Duffy, G.G. and Chen, X.D. (2015) Heat transfer coefficient of flowing wood pulp fibre suspensions to monitor fibre and paper quality. Applied Thermal Engineering, 78. pp. 172-184. ISSN 1359-4311

Kazi, S.N. and Teng, K.H. and Zakaria, M.S. and Sadeghinezhad, E. and Bakar, M.A. (2015) Study of mineral fouling mitigation on heat exchanger surface. Desalination, 367. pp. 248-254. ISSN 0011-9164

Keshavarz, Hassan and Sattari, Mohammad Reza Jabbarpour and Noor, Rafidah Md (2012) Session initiation protocol attacks and challenges. In: 2012 International Conference on Security Science and Technology (ICSST 2012), 10-12 March 2012, Hong Kong.

Khamis, N. and Idris, S. and Ahmad, R. and Idris, N. (2008) Assessing object-oriented programming skills in the core education of computer science and information technology: Introducing new possible approach. WSEAS Transactions on Computers, 7 (9). pp. 1427-1436. ISSN 1109-2750

Khamis, N.A. and Chin Yang, L. and Nordin, A. (2014) Automated call receiving and forwarding mechanism for supporting integrated disaster management system. In: Proceedings of SCEI Seoul Conferences, 10-11 Apr 2014, Seoul, Korea.

Khan, A.N. and Mat Kiah, M.L. and Khan, S.U. and Madani, S.A. (2012) Towards secure mobile cloud computing: a survey. Future Generation Computer Systems. ISSN 0167-739X

Khan, M.M.A. and Ismail, M.F.B. and Dimyati, Kaharudin (2010) Interworking between WiMAX and UMTS to provide seamless services. International Journal of the Physical Sciences, 5 (6). pp. 852-864. ISSN 1992-1950

Khan, M.N. and Ismail, E. and Yusof, N.S.M. (2010) A new empirical kinetic method for the determination of ion-exchange constants for the counterions of cationic micelles: The rate of piperidinolysis and hydrolysis of anionic phenyl salicylate as the kinetic probes. Colloids and Surfaces A-Physicochemical and Engineering Aspects, 361 (1-3). pp. 150-161.

Khan, S. and Gani, Abdullah and Abdul Wahab, A.W. and Bagiwa, M.A. (2015) SIDNFF: Source identification network forensics framework for cloud computing. In: IEEE International Conference on Consumer Electric, 06-08 Jun 2015, Taiwan, China. (Submitted)

Khan, S. and Gani, Abdullah and Sreekandath, M. (2011) The routing performance of Logarithmic-hop Structured P2P overlay. In: 2011 IEEE Conference on Open Systems (ICOS2011), 25-28 Sep 2011, Langkawi.

Khan, Saiful and Gani, Abdullah (2012) Model of complex searching over structured P2P overlay under dynamic environment. International Journal of Information and Electronics Engineering, 2 (2). pp. 146-150. ISSN 2010-3719

Khanlou, H.M. and Ang, B.C. and Talebian, S. and Afifi, A.M. and Andriyana, A. (2015) Electrospinning of polymethyl methacrylate nanofibers: Optimization of processing parameters using the Taguchi design of experiments. Textile Research Journal, 85 (4). pp. 356-368. ISSN 0040-5175

Khanlou, H.M. and Ang, B.C. and Talebian, S. and Barzani, M.M. and Silakhori, M. and Fauzi, H. (2015) A systematic study of maghemite/PMMA nano-fibrous composite via an electrospinning process: Synthesis and characterization. Measurement, 70. pp. 179-187. ISSN 0263-2241

Khanmirzaei, M.H. and Ramesh, S. and Ramesh, K. (2015) Hydroxypropyl Cellulose Based Non-Volatile Gel Polymer Electrolytes for Dye-Sensitized Solar Cell Applications using 1-methyl-3-propylimidazolium iodide ionic liquid. Scientific Reports, 5. ISSN 2045-2322

Kho, F.W.L. and Law, P.L. and Ibrahim, S.H. and Sentian, J. (2007) Carbon monoxide levels along roadway. International Journal of Environmental Science and Technology, 4 (1). pp. 27-34. ISSN 1735-1472

Khor, W.C. and Puah, S.M. and Tan, J.A.M.A and Puthucheary, S.D. and Chua, K.H. (2015) Phenotypic and genetic diversity of Aeromonas Species isolated from fresh water lakes in Malaysia. PLoS ONE, 10 (12). ISSN 1932-6203

Khorramian, K. and Maleki, S. and Shariati, M. and Sulong, N.H.R (2015) Behavior of Tilted Angle Shear Connectors. PLoS ONE, 10 (12). ISSN 1932-6203

Kiah, M.L.M. and Martin, K.M. (2008) Host mobility protocol for secure group communication in wireless mobile environments. International Journal of Security and its Applications, 2 (1). pp. 100-107.

Kiah, M.L.M. and Qabajeh, L.K. and Qabajeh, M.M. (2010) Unicast position-based routing protocols for ad-hoc networks. Acta Polytechnica Hungarica, 7 (5). pp. 19-46.

Kibria, M.A. and Anisur, M.R. and Mahfuz, M.H. and Saidur, R. and Metselaar, I.H.S.C. (2015) A review on thermophysical properties of nanoparticle dispersed phase change materials. Energy Conversion and Management, 95. pp. 69-89. ISSN 0196-8904

Kim, K. and Cho, E. and Thokchom, B. and Cui, M. and Jang, M. and Khim, J. (2015) Synergistic sonoelectrochemical removal of substituted phenols: Implications of ultrasonic parameters and physicochemical properties. Ultrasonics Sonochemistry, 24. pp. 172-177. ISSN 1350-4177

Kiong, L.C. and Rajeswari, M. and Rao, M.V.C. (2003) Nonlinear dynamic system identification and control via self-regulating modular neural network. Neural Network World, 13 (4). ISSN 1210-0552

Kiran, K. (2010) Service quality and customer satisfaction in academic libraries: Perspectives from a Malaysian university. Library Review, 59 (4). pp. 261-273. ISSN 0024-2535

Kiran, K. and Diljit, S. (2012) Modeling web-based library service quality. Library & Information Science Research, 34 (3). pp. 184-196. ISSN 0740-8188

Krishnasamy, Kemalatha and Lee, Sai and Palaniappan, Sellappan (2003) Effective design of e-learning application incorporating multiple intelligences. Digital Libraries: Technology and Management of Indigenous Knowledge for Global Access, 2911. pp. 693-694. ISSN 0302-9743

Krishnasamy, Kemalatha and Lee, Sai Peck and Palaniappan, Ananda Kumar (2006) Alternative learning approaches for electronic learning environments in smart schools: survey results. The International Arab Journal of Information Technology, 3 (2). pp. 149-156.

Kristmundsson, Árni and Erlingsdottir, Ásthildur and Freeman, Mark Andrew (2015) Is an Apicomplexan Parasite Responsible for the Collapse of the Iceland Scallop (Chlamys islandica) Stock? PLoS ONE, 10 (12). e0144685. ISSN 1932-6203

Ku, P.X. and Abu Osman, N.A. and Wan Abas, W.A.B. (2014) Balance control in lower extremity amputees during quiet standing: a systematic review. Gait and Posture, 39 (2). pp. 672-682. ISSN 09666362

Ku , P.X. and Abu Osman, N.A. and Yusof, A. and Wan Abas, W.A.B. (2012) Biomechanical evaluation of the relationship between postural control and body mass index. Journal of Biomechanics, 45 (9). pp. 1638-1642. ISSN 0021-9290

Kuan, C.S. and Yew, S.M. and Toh, Y.F. and Chan, C.L. and Lim, S.K. and Lee, K.W. and Na, S.L. and Hoh, C.C. and Yee, W.Y. and Ng, K.P. (2015) Identification and characterization of a rare fungus, quambalana cyanescens, isolated from the peritoneal fluid of a patient after nocturnal intermittent peritoneal dialysis. PLoS ONE, 10 (12). ISSN 1932-6203

Kum, Lee Ching and Lee, Sai Peck (2005) Integrating XML with relational databases using middleware approach. Malaysian Journal of Computer Science, 18 (2). pp. 1-10. ISSN 0127-9084

Kumar, N. and Anand, L. (2015) Broadband high performance laterally diffused metal-oxide-semiconductor power amplifier for mobile two-way radio applications. IET Circuits, Devices and Systems, 9 (4). pp. 283-289. ISSN 1751-858X

Kumaran, S. (2018) Social media metrics analytics: Study on B2C (Business to Consumer) Brand's Page. In: International Conference on Management, Technology and Social Sciences 2018, 7 May 2018, Geneva Business School, Geneva, Switzerland .

Kundu, A. and Sen Gupta, B. and Hashim, M.A. and Sahu, J.N. and Mujaware, M. and Redzwan, G. (2015) Optimisation of the process variables in production of activated carbon by microwave heating. RSC Advances, 5 (45). pp. 35899-35908. ISSN 2046-2069

Kwek, L.C. and Kang, C.C. and Loo, C.K. and Wong, E.K. (2005) Implementation of evolutionary active force control in a 5-link biped robot. Intelligent Automation and Soft Computing, 11 (3). pp. 167-178. ISSN 1079-8587

Kwek, L.C. and Wong, E.K. and Loo, C.K. and Rao, M.V.C. (2003) Application of active force control and iterative learning in a 5-link biped robot. Journal of Intelligent & Robotic Systems, 37 (2). pp. 143-162.

L

Laghari, J.A. and Mokhlis, H. and Karimi, M. and Bakar, A.H.A. and Mohamad, H. (2015) An islanding detection strategy for distribution network connected with hybrid DG resources. Renewable & Sustainable Energy Reviews, 45. pp. 662-676. ISSN 1364-0321

Lahsasna, A. and Ainon, R.N. and Teh, Y.W. (2010) Credit scoring models using soft computing methods: A survey. International Arab Journal of Information Technology, 7 (2). pp. 115-123.

Lam, W.H. and Chen, L. and Hashim, R. (2015) Analytical wake model of tidal current turbine. Energy, 79. pp. 512-521. ISSN 0360-5442

Larsson, H.M. and Vythilingam, G. and Pinnagoda, K. and Vardar, E. and Engelhardt, E.M. and Sothilingam, S. and Thambidorai, R.C. and Kamarul, Tunku and Hubbell, J.A. and Frey, P. (2018) Fiber density of collagen grafts impacts rabbit urethral regeneration. Scientific Reports, 8 (1). pp. 1-8. ISSN 2045-2322

Lashkari, Arash Habibi and Gani, Abdullah and Sabet, Leila Ghasemi and Farmand, Samaneh (2010) A new algorithm on Graphical User Authentication (GUA) based on multi-line grids. Scientific Research and Essays, 5 (24). pp. 3865-3875. ISSN 1992-2248

Latef, T.A. and Khamas, S. and Reza, A.W. (2015) Gain enhancement for circularly polarized double layered printed hemispherical helical antenna arrays. Journal of Electromagnetic Waves and Applications, 29 (10). pp. 1342-1353. ISSN 0920-5071

Latibari, S.T. and Mehrali, M. and Mahlia, T.M.I. and Afifi, A.B.M. and Akhiani, A.R. and Metselaar, H.S.C. (2015) Facile synthesis and thermal performances of stearic acid/titania core/shell nanocapsules by sol-gel method. Energy, 85. pp. 635-644. ISSN 0360-5442

Lee, C. and Baba, M.S. (2005) The Intelligent Web-Based Tutoring System using the C++ Standard Template Library. Malaysian Online Journal of Instructional Technology, 2 (3). pp. 34-42. ISSN 1823-1144

Lee, C.S. and Aroua, M.K. and Daud, W.M.A.W. and Cognet, P. and Peres-Lucchese, Y. and Fabre, P.L. and Reynes, O. and Latapie, L. (2015) A review: Conversion of bioglycerol into 1,3-propanediol via biological and chemical method. Renewable & Sustainable Energy Reviews, 42. pp. 963-972. ISSN 1364-0321

Lee, G.C. and Loo, C.K. and Chockalingam, L. (2012) An integrated approach for head gesture based interface. Applied Soft Computing, 12 (3). pp. 1101-1114. ISSN 1568-4946

Lee, H.V. and Juan, J.C. and Taufiq-Yap, Y.H. and Kong, P.S. and Rahman, N.A. (2015) Advancement in heterogeneous base catalyzed technology: An efficient production of biodiesel fuels. Journal of Renewable and Sustainable Energy, 7 (3). p. 46. ISSN 1941-7012

Lee, J.S. and Chan, C.S. and Chang, C.C. (2009) Non-iterative privacy preservation for online lotteries. IET Information Security, 3 (4). pp. 139-147. ISSN 1751-8709

Lee, K.H. and Teh, K.H. (2001) Evaluation of academic library web sites in Malaysia. Malaysian Journal of Library & Information Science, 5 (2). pp. 95-108.

Lee, S.L. and Saidur, R. and Sabri, M.F.M. and Min, T.K. (2015) Molecular dynamic simulation on the thermal conductivity of nanofluids in aggregated and non-aggregated states. Numerical Heat Transfer Part a-Applications, 68 (4). pp. 432-453. ISSN 1040-7782

Lee, S.P. and Zildzic, D. (2006) Oracle database workload performance measurement and tuning toolkit. Issues in Informing Science and Information Technology, 3. ISSN 1547-5840

Lee, Sai Peck and Rolland, Colette (2000) Achieving reuse via a generic model of reusable components. International Journal of Modelling and Simulation, 20 (1). pp. 12-19. ISSN 0228-6203

Lee, Sai Peck and Thin, Siew Khim and Liu, Hong Song (2000) Object-oriented application framework on manufacturing domain. Malaysian Journal of Computer Science, 13 (1). pp. 56-64. ISSN 0127-9084

Lee, W.S. and Chua, A.S.M. and Yeoh, H.K. and Nittami, T. and Ngoh, G.C. (2015) Strategy for the biotransformation of fermented palm oil mill effluent into biodegradable polyhydroxyalkanoates by activated sludge. Chemical Engineering Journal, 269. pp. 288-297. ISSN 1385-8947

Leong, H.Y. and Yap, B.K. and Navas, K. and Mohd Rusli, I. and Tan, L.C. and Faiz, M. (2013) Development of insulated cu wire stitch bonding. In: 1st International Conference on the Science & Engineering Materials , Sunway Putra Hotel, Kuala lumpur, Malaysia.

Leong, H.Y. and Yap, B.K. and Navas, K. and Mohd Rusli, I. and Tan, L.C. and Muhammad, F. (2013) In-depth study and characterization of insulated Cu wire ball bonding. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Leong, K.E. and Alexander, N. (2014) College students attitude and mathematics achievement using web based homework. Eurasia Journal of Mathematics Science and Technology Education, 10 (6). pp. 609-615.

Leow, R.S. and Ibrahim, F. and Moghavvemi, M. (2007) Development of a steady state visual evoked potential (SSVEP)-based brain computer interface (BCI) system. In: 2007 International Conference on Intelligent and Advanced Systems, ICIAS 2007, 2007, Kuala Lumpur.

Leow, R.S. and Moghavvemi, M. and Ibrahim, F. (2010) An efficient low-cost real-time brain computer interface system based on SSVEP. IEICE Electronics Express, 7 (5). pp. 326-331. ISSN 1349-2543

Liau, K.F. and Shoji, T. and Ong, Y.H. and Chua, A.S.M. and Yeoh, H.K. and Ho, P.Y. (2015) Kinetic and stoichiometric characterization for efficient enhanced biological phosphorus removal (EBPR) process at high temperatures. Bioprocess and Biosystems Engineering, 38 (4). pp. 729-737. ISSN 1615-7591

Liew, W.S. and Seera, M. and Loo, C.K. and Lim, E. (2015) Affect classification using genetic-optimized ensembles of fuzzy ARTMAPs. Applied Soft Computing, 27. pp. 53-63. ISSN 1568-4946

Liew, Y.M. and McLaughlin, R.A. and Chan, B.T. and Aziz, Y.F.A. and Chee, K.H. and Ung, N.M. and Tan, L.K. and Lai, K.W. and Ng, S. and Lim, E. (2015) Motion corrected LV quantification based on 3D modelling for improved functional assessment in cardiac MRI. Physics in Medicine and Biology, 60 (7). pp. 2715-2733. ISSN 0031-9155

Lim, A.C.O. and Chong, V.C. and Wong, C.S. and Muniandy, S.V. (2015) Sound signatures and production mechanisms of three species of pipefishes (Family: Syngnathidae). PeerJ, 3. ISSN 2167-8359

Lim, C.H. and Chan, C.S. (2012) A fuzzy qualitative approach for scene classification. In: World Congress on Computational Intelligence , 10-15 June 2012, Brisbane, Australia.

Lim, C.K. and Chan, C.S. (2011) Logical connectives and operativeness of BK sub-triangle product in fuzzy inferencing. International Journal of Fuzzy Systems, 13 (4). pp. 237-245. ISSN 1562-2479

Lim, K.M. and Loo, C.K. and Lim, W.S. (2010) Autonomous and deterministic supervised fuzzy clustering. Neural Network World, 20 (6). pp. 705-721. ISSN 1210-0552

Lim, M.W. and Lau, E.V. and Poh, P.E. and Chong, W.T. (2015) Interaction studies between high-density oil and sand particles in oil flotation technology. Journal of Petroleum Science and Engineering, 131. pp. 114-121. ISSN 0920-4105

Lim, P.K. and Ng, S.C. and Jassim, W.A. and Redmond, S.J. and Zilany, M. and Avolio, A. and Lim, E. and Tan, M.P. and Lovell, N.H. (2015) Improved measurement of blood pressure by extraction of characteristic features from the cuff oscillometric waveform. Sensors, 15 (6). pp. 14142-14161. ISSN 14142-14161

Lim, Tong and Lee, Sai (2003) Object-to-Multidimensional database mapping algorithms. Digital Libraries: Technology and Management of Indigenous Knowledge for Global Access, 2911. pp. 556-562. ISSN 0302-9743

Lim, Tong Ming and Lee, Sai Peck (2002) A proposed object schema management tool. Malaysian Journal of Computer Science, 15 (1). pp. 77-83. ISSN 0127-9084

Liza, S. and Ohtake, N. and Akasaka, H. and Munoz-Guijosa, J.M. (2015) Tribological and thermal stability study of nanoporous amorphous boron carbide films prepared by pulsed plasma chemical vapor deposition. Science and Technology of Advanced Materials, 16 (3). p. 13. ISSN 1468-6996

Loh, K.K. and Yeo, K.S. and Shee, Y.G. and Adikan, Faisal Rafiq Mahamd and Mahdi, M.A. (2015) Microwave photonic filter using multiwavelength brillouin-erbium fiber laser. IEEE Photonics Technology Letters, 27 (1). pp. 65-68. ISSN 1041-1135

Lokman, A. and Arof, Hamzah and Harun, Sulaiman Wadi (2015) Dumbbell shaped inline Mach-Zehnder interferometer for glucose detection. Measurement, 59. pp. 167-170. ISSN 0263-2241

Lokman, A. and Arof, Hamzah and Harun, Sulaiman Wadi (2015) Tapered fiber coated with hydroxyethyl cellulose/polyvinylidene fluoride composite for relative humidity sensor. Sensors and Actuators a-Physical, 225. pp. 128-132. ISSN 0924-4247

Loo, C. and Bardia, Y. (2012) Sparse F-IncSFA for action recognition. In: JSME Conference on Robotics and Mechatronics, 27-29 May 2012, Hamamatsu, Japan.

Loo, C.K. and Law, A. and Lim, W.S. and Rao, M.V.C. (2006) Probabilistic ensemble simplified fuzzy ARTMAP for sonar target differentiation. Neural Computing & Applications, 15 (1). pp. 79-90. ISSN 0941-0643

Loo, C.K. and Liew, W.S. and Sayeed, M.S. (2012) Genetic ensemble biased ARTMAP method of ECG-Based emotion classification. In: International Conference on Intelligent Interactive Multimedia Systems and Services, 23-25 May 2012, Gifu, Japan.

Loo, C.K. and Liew, W.S. and Seera, M. and Lim, E. (2015) Probabilistic ensemble fuzzy ARTMAP optimization using hierarchical parallel genetic algorithms. Neural Computing & Applications, 26 (2). pp. 263-276. ISSN 0941-0643

Loo, C.K. and Perus, M. and Bischof, H. (2005) Object recognition using quantum holography with neural-net preprocessing. Journal of Optical Technology (JOT), 72 (5). pp. 358-363. ISSN 1070-9762

Loo, C.K. and Peruš, M. and Bischof, H. (2004) Associative memory based image and object recognition by quantum holography. Open Systems & Information Dynamics, 11 (3). pp. 277-289. ISSN 1230-1612

Loo, C.K. and Peruš, M. and Bischof, H. (2005) Simulated quantum-optical object recognition from high-resolution images. Optics and Spectroscopy, 99 (2). pp. 218-223. ISSN 0030-400X

Loo, C.K. and Rajeswari, M. and Rao, M.V.C. (2004) Novel direct and self-regulating approaches to determine optimum growing multi-experts network structure. Neural Networks, IEEE Transactions on Neural Networks, 15 (6). pp. 1378-1395. ISSN 1045-9227

Loo, C.K. and Rajeswari, M. and Rao, M.V.C. (2006) Robust incremental growing multi-experts network. Applied Soft Computing, 6 (2). pp. 139-153. ISSN 1568-4946

Loo, C.K. and Rajeswari, M. and Wong, E.K. and RaoTask, M.V.C. (2004) Mobile robot path planning using hybrid genetic algorithm and traversability vectors method. Intelligent Automation and Soft Computing, 10 (1). pp. 51-64. ISSN 1079-8587

Loo, C.K. and Rao, M.V.C. (2005) Accurate and reliable diagnosis and classification using probabilistic ensemble simplified fuzzy ARTMAP. IEEE Transactions on Knowledge and Data Engineering , 17 (11). pp. 1589-1593. ISSN 1041-4347

Loo, C.K. and Samraj, A. and Lee, G.C. (2011) Evaluation of methods for estimating fractal dimension in motor imagery-based brain computer interface. Discrete Dynamics in Nature and Society, 2011. ISSN 1026-0226

Loo, M.S. and Le Cam, J.B. and Andriyana, A. and Robin, E. and Afifi, A.M. (2015) Fatigue of swollen elastomers. International Journal of Fatigue, 74. pp. 132-141. ISSN 0142-1123

Loo, P.L. and Chong, V.C. and Ibrahim, S. and Sabaratnam, V. (2015) Manipulating culture conditions and feed quality to increase the survival of larval marble goby oxyeleotris marmorata. North American Journal of Aquaculture, 77 (2). pp. 149-159. ISSN 1522-2055

Low, W.S. and Wan Abas, Wan Abu Bakar (2015) Benchtop technologies for circulating tumor cells separation based on biophysical properties. BioMed Research International. p. 22. ISSN 2314-6133

Lu, T. and Wu, L. and Ma, X. and Shivakumara, P. and Tan, C.L. (2014) Anomaly detection through spatio-temporal context modeling in crowded scenes. In: International Conference on Pattern Recognition (ICPR) , 24-28 Aug 2014, Stockholm, Sweden. (Submitted)

Lwin, N. and Ahmad Fauzi, M.N. and Sreekantan, S. and Othman, R. (2015) Physical and electromagnetic properties of nanosized Gd substituted Mg–Mn ferrites by solution combustion method. Physica B: Condensed Matter, 461. pp. 134-139. ISSN 0921-4526

Lwin, N. and Othman, R. and Sreekantan, S. and Fauzi, M.N.A. (2015) Study on the structural and electromagnetic properties of Tm-substituted Mg-Mn ferrites by a solution combustion method. Journal of Magnetism and Magnetic Materials, 385. pp. 433-440. ISSN 0304-8853

M

Maah, M.J. and Edzan, N.N. (2009) Persepsi pengguna terhadap perpustakaan digital. In: Persidangan Perpustakaan Digital ke-5, 20-22 Julai 2009, Kuala Lumpur.

Maghami, M. and Navabi Asl, S. and Rezadad, M.i. and Ale Ebrahim, N. and Gomes, C. (2015) Qualitative and quantitative analysis of solar hydrogen generation literature from 2001 to 2014. Scientometrics, 105 (2). pp. 759-771.

Mahbubul, I.M. and Saadah, A. and Saidur, R. and Khairul, M.A. and Kamyar, A. (2015) Thermal performance analysis of Al2O3/R-134a nanorefrigerant. International Journal of Heat and Mass Transfer, 85. pp. 1034-1040. ISSN 0017-9310

Mahbubul, I.M. and Saidur, R. and Amalina, M.A. and Elcioglu, E.B. and Okutucu-Ozyurt, T. (2015) Effective ultrasonication process for better colloidal dispersion of nanofluid. Ultrasonics Sonochemistry, 26. pp. 361-369. ISSN 1350-4177

Mahdavi, S.H. and Razak, H.A. (2015) A comparative study on optimal structural dynamics using wavelet functions. Mathematical Problems in Engineering. p. 10. ISSN 1024-123X

Mahdavi, S.H. and Razak, H.A. (2015) An efficient iterative scheme using family of chebyshev's operations. Mathematical Problems in Engineering. p. 10. ISSN 1024-123X

Mahdavifard, M.H. and Haseeb, A.S. Md. Abdul and Arafat, M.M. (2013) Reflow of Sn-3.8Ag-O.7Cu solder on Ni substrate in presence of Mo nanoparticles. In: 1st International Conference on the Science & Engineering of Materials, 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Mahdiraji, G.A. and Adikan, Faisal Rafiq Mahamd and Bradley, D.A. (2015) Collapsed optical fiber: A novel method for improving thermoluminescence response of optical fiber. Journal of Luminescence, 161. pp. 442-447. ISSN 0022-2313

Maher, I. and Eltaib, M.E.H. and Sarhan, A.A.D. and El-Zahry, R.M. (2015) Cutting force-based adaptive neuro-fuzzy approach for accurate surface roughness prediction in end milling operation for intelligent machining. International Journal of Advanced Manufacturing Technology, 76 (5-8). pp. 1459-1467. ISSN 0268-3768

Maher, I. and Sarhan, A.A.D. and Barzani, M.M. and Hamdi, M. (2015) Increasing the productivity of the wire-cut electrical discharge machine associated with sustainable production. Journal of Cleaner Production, 108 (A). pp. 247-255. ISSN 0959-6526

Maher, I. and Sarhan, A.A.D. and Hamdi, M. (2015) Review of improvements in wire electrode properties for longer working time and utilization in wire EDM machining. International Journal of Advanced Manufacturing Technology, 76 (1-4). pp. 329-351. ISSN 0268-3768

Mahlia, T.M.I. and Yanti, P.A.A. (2010) Cost efficiency analysis and emission reduction by implementation of energy efficiency standards for electric motors. Journal of Cleaner Production, 18 (4). pp. 365-374.

Mahmoodian, R. and Hamdi, M. and Hassan, M.A. and Akbari, A. (2015) Mechanical and chemical characterization of a TiC/C system synthesized using a focus plasma arc. PLoS ONE, 10 (6). p. 10. ISSN 1932-6203

Mahmoodian, R. and Yahya, R. and Dabbagh, A. and Hamdi, M. and Hassan, M.A. (2015) Investigation of Embedded Si/C System Exposed to a Hybrid Reaction of Centrifugal-Assisted Thermite Method. PLoS ONE, 10 (12). ISSN 1932-6203

Mahshuri, Y. and Amalina, M.A. (2013) Hardness and compressive properties of calcium carbonate derived from clam shell filled unsaturated polyester composites. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Mahyiddin, W.A.W.M. and Martin, P.A. and Smith, P.J. (2015) Performance of Synchronized and Unsynchronized Pilots in Finite Massive MIMO Systems. IEEE Transactions On Wireless Communications , 14 (12). pp. 6763-6776. ISSN 1536-1276

Mahzan, N. (2014) Examining navigators' job satisfaction in royal Malaysian air force through the lenses of Herzberg's motivation- hygiene theory. In: International Conference on Computer and Business Management (ICCBM 2014), 02-03 June 2014, London, UK. (Submitted)

Maisarah, L. and Rahbari, R.G. and Hamdi, M. and Fadzil, M. and Farazila, Y. (2013) Characteristics of hybrid microwave sintering of Zn-AI-Cu-Mg alloy. In: 1st International Conference on the Science & Engineering Materials, 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur.

Majeed, A. and Mat Kiah, M.L. and Madhloom, H.T. and Zaidan, B.B. and Zaidan, A.A. (2009) Novel approach for high secure and high rate data hidden in the image using image texture analysis. International Journal of Engineering and Technology, 1 (2). pp. 63-69. ISSN 0975-4024

Makinejad, M.D. and Abu Osman, N.A. and Wan Abas, W.A.B. and Bayat, M. (2013) Preliminary analysis of knee stress in full extension landing. Clinics, 68 (9). pp. 1180-1188. ISSN 1807-5932

Malakooti, H. and Jalooli, A. and Jabbarpour, M.R. and Marefat, A. and Md Noor, R. (2014) Opportunistic XOR-coding content propagation in VANET. In: Proceedings of SCEI Seoul Conferences, 10-11 Apr 2014, Seoul, Korea.

Malek, S. and Salleh, A. and Milow, P. and Baba, M.S. and Sharifah, S.A. (2012) Applying artificial neural network theory to exploring diatom abundance at tropical Putrajaya Lake, Malaysia. Journal of Freshwater Ecology, 27 (2). pp. 211-227. ISSN 0270-5060

Mamun, N. and Jassim, W.A. and Zilany, M.S.A. (2015) Prediction of speech intelligibility using a neurogram orthogonal polynomial measure (NOPM). IEEE/ACM Transactions on Audio, Speech and Language Processing, 23 (4). pp. 760-773. ISSN 2329-9290

Mandiraji, G.A. and Ghomeishi, M. and Dermosesian, E. and Hashim, S. and Ung, N.M. and Adikan, Faisal Rafiq Mahamd and Bradley, D.A. (2015) Optical fiber based dosimeter sensor: Beyond TLD-100 limits. Sensors and Actuators A: Physical, 222. pp. 48-57. ISSN 0924-4247

Mansoori, Masood and Zakaria, Omar and Gani, Abdullah (2012) Improving exposure of intrusion deception system through implementation of hybrid honeypot. The International Arab Journal of Information Technology, 9 (5). pp. 436-444. ISSN 1683-3198

Mansouri, M. and Salamonsen, R.F. and Lim, E. and Akmeliawati, R. and Lovell, N.H. (2015) Preload-based starling-like control for rotary blood pumps: Numerical comparison with pulsatility control and constant speed operation. PLoS ONE, 10 (4). p. 16. ISSN 1932-6203

Mansourvar, M. and Raj, R.G. and Ismail, M. and Kareem, S.A. and Shanmugam, S. and Wahid, S. and Mahmud, R. and Abdullah, R. and Nasaruddin, F. and Idris, N. (2012) Automated Web Based System for Bone Age Assessment Using Histogram Technique. Malaysian Journal of Computer Science, 25 (3). pp. 107-121. ISSN 0127-9084

Mansourvara, M. and Raj, R.G. and Ismail, M.A. and Kareem, S.A. and Shanmugam, S. and Wahid, S. and Mahmud, R. and Abdullah, R.H. and Nasaruddin, F.H. and Idris, N. (2012) Automated web based system for bone age assessment using historam technique. Malaysian Journal of Computer Science, 25 (3). pp. 107-121.

Maryam, K.A. and Tehereh, M. (2014) Avant Garde modernization and new technology : Conceptual review of literature. In: International Conference on Innovative Trends in Multidisciplinary Academic Research, 20-21 October 2014, Istanbul, Turkey.

Masmiati, N. and Sarhan, A.A.D. (2015) Optimizing cutting parameters in inclined end milling for minimum surface residual stress - Taguchi approach. Measurement, 60. pp. 267-275. ISSN 0263-2241

Masum, S.M. and Masjuki, Haji Hassan and Kalam, M.A. and Palash, S.M. and Habibullah, M. (2015) Effect of alcohol-gasoline blends optimization on fuel properties, performance and emissions of a SI engine. Journal of Cleaner Production, 86. pp. 230-237. ISSN 0959-6526

Mat Kiah, M.L. and Zaidan, B.B. and Zaidan, A.A. and Mohammed Ahmed, A. and Al-Bakri, S.H. (2011) A review of audio based steganography and digital watermarking. International Journal of Physical Sciences, 6 (16). pp. 3837-3850. ISSN 1992-1950

Maul, T. and Baba, S. (2011) Unsupervised learning in second-order neural networks for motion analysis. Neurocomputing, 74 (6). pp. 884-895. ISSN 0925-2312

Maul, T. and Baba, S. and Yusof, A. (2005) Dynamic inputs and attraction force analysis for visual invariance and transformation estimation. Advances in Natural Computation. pp. 407-408.

Mazari, S.A. and Si Ali, B. and Jan, B.M. and Saeed, I.M. and Nizamuddin, S. (2015) An overview of solvent management and emissions of amine-based CO2 capture technology. International Journal of Greenhouse Gas Control, 34. pp. 129-140. ISSN 1750-5836

Mazlan, M.H. and Abu Osman, N.A. and Wan Abas, W.A.B. (2011) Hip 3D joint mechanics analysis of normal and obese individuals' gait. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Md Noor, R. and Syed Jamal, S.N.S. and Zakaria, K.H. (2012) Parental mobile control system for children’s internet use. In: International Conference on Information Society, 25-28 June 2012, London, UK.

Meau, Y.P. and Ibrahim, F. and Narainasamy, S.A.L. and Omar, R. (2006) Intelligent classification of electrocardiogram (ECG) signal using extended Kalman Filter (EKF) based neuro fuzzy system. Computer Methods and Programs in Biomedicine, 82 (2). pp. 157-168. ISSN 0169-2607

Medani, A. and Gani, Abdullah and Zakaria, O. and Zaidan, A.A. and Zaidan, B.B. (2011) Review of mobile short message service security issues and techniques towards the solution. Scientific Research and Essays, 6 (6). pp. 1147-1165. ISSN 1992-2248

Mehdi, A. and Rozainah, M.Z. and Pozi, M. (2012) A review of methods of participatory management of mangrove forest conservation. In: 2nd Conference for Regional Cooperation in Ocean and Earth Science Research in the South China Sea, 21-24 October 2012, University of Malaya, Kuala Lumpur, Malaysia.

Mehrali, M. and Sadeghinezhad, E. and Rashidi, M.M. and Akhiani, A.R. and Latibari, S.T. and Mehrali, M. and Metselaar, H.S.C. (2015) Experimental and numerical investigation of the effective electrical conductivity of nitrogen-doped graphene nanofluids. Journal of Nanoparticle Research, 17 (6). p. 17. ISSN 1388-0764

Mehran, Q.M. and Bushroa, A.R. and Fazal, M.A. (2015) Evaluation of CrAlN multilayered coatings deposited by PVD magnetron sputtering. Journal of Adhesion Science and Technology, 29 (19). pp. 2076-2089. ISSN 0169-4243

Mekhilef, S. (2010) Renewable energy resources and technology practices in Malaysia. In: 5th International Symposium on Hydrocarbons & Chemistry (ISHC5), Sidi Fredj, Algiers, 23 - 25 May 2010. (Unpublished)

Ming, Lim Tong and Lee, Sai Peck (2004) Extended object languages for the extolware persistence framework. Issues in Informing Science and Information Technology, 1. pp. 407-416. ISSN 1547-5840

Mirhassani, S. and Ong, H.C. and Chong, W.T. and Leong, K.Y. (2015) Advances and challenges in grid tied photovoltaic systems. Renewable & Sustainable Energy Reviews, 49. pp. 121-131. ISSN 1364-0321

Mirhassani, S.M. and Golroodbari, S.Z.M and Goiroodbari, S.M.M. and Mekhilef, S. (2015) An improved particle swarm optimization based maximum power point tracking strategy with variable sampling time. International Journal of Electrical Power & Energy Systems, 64. pp. 761-770. ISSN 0142-0615

Mirzaei, M. and Huang, Y.F. and El-Shafie, A. and Shatirah, A. (2015) Application of the generalized likelihood uncertainty estimation (GLUE) approach for assessing uncertainty in hydrological models: A review. Stochastic Environmental Research and Risk Assessment, 29 (5). pp. 1265-1273. ISSN 1436-3240

Mo, K.H. and Alengaram, U.J. and Jumaat, M.Z. and Yap, S.P. (2015) Feasibility study of high volume slag as cement replacement for sustainable structural lightweight oil palm shell concrete. Journal of Cleaner Production, 91. pp. 297-304. ISSN 0959-6526

Mo, K.H. and Alengaram, U.J. and Visintin, P. and Goh, S.H. and Jumaat, M.Z. (2015) Influence of lightweight aggregate on the bond properties of concrete with various strength grades. Construction and Building Materials, 84. pp. 377-386. ISSN 0950-0618

Mofachirul, I. and Roslan, H. and Saiful Islam, A.B.M. (2013) Behaviour of peat-added composite bricks in low cost building construction. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Mofijur, M. and Masjuki, Haji Hassan and Kalam, M.A. and Rahman, S.M.A. and Mahmudul, H.M. (2015) Energy scenario and biofuel policies and targets in ASEAN countries. Renewable & Sustainable Energy Reviews, 46. pp. 51-61. ISSN 1364-0321

Mohamed, A. and Lee, S.P. and Salim, S.S. (2005) LiSER: a software experience management tool to support organisational learning in software development organisations. The International Arab Journal of Information Technology, 2 (1). pp. 10-16. ISSN 1683-3198

Mohamed, Habibah and Irawati, Ninik and Ahmad, Fauzan and Ibrahim, Mohd Haniff and Ambran, Sumiaty and Rahman, Mohd Azizi Abdul and Harun, Sulaiman Wadi (2017) Optical Humidity Sensor Based on Tapered Fiber with Multi-walled Carbon Nanotubes Slurry. Indonesian Journal of Electrical Engineering and Computer Science, 6 (1). p. 97. ISSN 2502-4752

Mohamed Saaid, M.F. and Wan Abas, Wan Abu Bakar and Arof, Hamzah and Mokhtar, N. and Ramli, R. and Ibrahim, Z. (2011) Change point detection of EEG signals based on particle swarm optimization. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Mohameda, A.H. and Leeb, S.P. and Salim, S.S. (2004) An ontology-based knowledge model for software experience management. International Journal of The Computer, 14 (4). pp. 79-88.

Mohammad Aizat, J. and Mohd Mahyeddin, M.S. and Mohd Anuar, R. (2015) Penggunaan alkohol dalam penghasilan produk minuman dan makanan menurut perspektif fiqh. In: Prosiding Seminar Fiqh Semasa (SeFis)2015, 10 Jun 2015, Dewan Kuliah Utama, Fakulti Pengajian Quran dan Sunnah (FPQS), Universiti Sains Islam Malaysia (USIM).

Mohammad Naqib, H. and Nur Hidayati, Z. and Mohd Anuar, R. (2015) Kesan perkembangan sains dan teknologi kepada perubahan ijtihad fiqh: Analisis terhadap tempoh maksimum kehamilan dan darah haid perempuan mengandung. In: Prosiding Seminar Fiqh Semasa (SeFis) 2015, 10 Jun 2015, Dewan Kuliah Utama, Fakulti Pengajian Quran dan Sunnah (FPQS), Universiti Sains Islam Malaysia (USIM).

Mohammadi, M. and Musa, S.N. and Bahreininejad, A. (2015) Optimization of economic lot scheduling problem with backordering and shelf-life considerations using calibrated metaheuristic algorithms. Applied Mathematics and Computation, 251. pp. 404-422. ISSN 0096-3003

Mohammadi, P. and Ibrahim, S. and Annuar, M.S.M. (2012) Comparative study on the effect of various pretreatment methods on the enrichment of hydrogen producing bacteria in anaerobic granulated sludge from brewery wastewater. Korean Journal of Chemical Engineering, 29 (10). pp. 1347-1351. ISSN 0256-1115

Mohammadi, P. and Ibrahim, S. and Annuar, M.S.M. and Ghafari, S. and Vikineswary, S. and Zinatizadeh, A.A. (2012) Influences of environmental and operational factors on dark fermentative hydrogen production: a review. Clean-Soil Air Water, 40 (11). pp. 1297-1305. ISSN 1863-0650

Mohammadi, P. and Ibrahim, S. and Annuar, M.S.M. and Law, S. (2011) Effects of different pretreatment methods on anaerobic mixed microflora for hydrogen production and COD reduction from palm oil mill effluent. Journal of Cleaner Production, 19 (14). pp. 1654-1658. ISSN 0959-6526

Mohammadi, P. and Ibrahim, S. and Mohamad Annuar, M.S. (2012) Effects of biomass, COD and bicarbonate concentrations on fermentative hydrogen production from POME by granulated sludge in a batch culture. International Journal of Hydrogen Energy, 37 (23). pp. 17801-17808. ISSN 0360-3199

Mohammadian, E. and Hamidi, H. and Asadullah, M. and Azdarpour, A. and Motamedi, S. and Junin, R. (2015) Measurement of CO2 solubility in NaCl brine solutions at different temperatures and pressures using the potentiometric titration method. Journal of Chemical and Engineering Data, 60 (7). pp. 2042-2049. ISSN 1932-6203

Mohammadnejad, M. and Ghazvini, M. and Mahlia, T.M.I. and Andriyana, A. (2015) A review on energy scenario and sustainable energy in Iran. Renewable & Sustainable Energy Reviews, 15 (9). pp. 4652-4658.

Mohd, M.A. (2012) Safe packaging for health food products. In: National Food Technology Seminar 2012 " Food for Wellness Trendsetter for Modern Lifestyle", 6 - 8 March 2012, Renaissance Melaka Hotel, Melaka.

Mohd Din, M.A. and Karim, M.R. and Saritha, P. and Mokhtar Azizi, N.Z. (2010) Development of GIS-based Kuala Lumpur transit information system. In: 3rd International Conference on Geoinformation Technology for Natural Disaster Management, 19-20 Oct 2010, Chiang Mai, Thailand. (Submitted)

Mohd Faizal, H. (2015) UM Research Repository : Guideline for depositor (2015). [Teaching Resource] (Unpublished)

Mohd Faizal, H. and Ilina Syazwani, M. (2015) Students Repository: Online archive for academic exercise, dissertation and theses. In: 7th Qualitative and Quantitative Methods in Libraries International Conference (QQML2015), 26-29 May 2015, Paris, France.

Mohd Faizal, H. and Juhaida, A.R. and Zanaria, S.U. (2016) Pembentangan perincian pembelian perisian mengedit dokumen: Perpustakaan Universiti Malaya. Project Report. PerpustakaanUniversiti Malaya. (Unpublished)

Mohd Rum, S.N. and Ismail, M.A. (2014) Ontology development of metacognitive support system for novice programmers (MSSNP). In: 2014 International Symposium on Technology Management and Emerging Technologies (ISTMET 2014), 27-29 May 2014, Bandung, Indonesia.

Mohd Sharif, M.S. and Zainab, A.N. (2004) Undergraduates in computer science and information technology using the internet as a resource. Malaysian Journal of Library & Information Science, 9 (1). pp. 1-16.

Mohebali, A. and Chiew, T.K. (2014) Redefining game engine architecture through concurrency. In: 13th International Conference on Intelligent Software Methodologies, Tools, and Techniques, 22-24 Sep 2014, Langkawi, Malaysia.

Mohktar, M.S. and Ibrahim, F. (2008) Assessment of salat taraweeh and fasting effect on body composition. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Mohktar, M.S. and Ibrahim, F. and Ismail, N.A. (2005) Bioelectrical impedance analysis in assessing the chances of obtaining coronary heart disease in obese subjects. In: 2005 Asian Conference on Sensors and the International Conference on new Techniques in Pharmaceutical and Biomedical Research, 2005, Kuala Lumpur.

Mohktar, M.S. and Ibrahim, F. and Ismail, N.A. (2013) Non-invasive approach to predict the cholesterol level in blood using bioimpedance and neural network techniques. Biomedical Engineering - Applications, Basis and Communications, 25 (06). p. 1350046. ISSN 1793-7132

Monajemi, H. and Mazinani, I. and Chao, O.Z. and Yee, K.S. and Kuan, K.K. and Karim, R. (2015) Using local stiffness indicator to examine the effect of honeycombs on the flexural stiffness of reinforced concrete beams. Measurement, 64. pp. 157-162. ISSN 0263-2241

Moo, E.K. and Abu Osman, N.A. and Pingguan-Murphy, B. and Wan Abas, W.A.B. and Spence, W.D. and Solomonidis, S.E. (2009) Interface pressure profile analysis for patellar tendon-bearing socket and hydrostatic socket. Acta of Bioengineering and Biomechanics, 11 (4). pp. 37-43. ISSN 1509-409X

Moshwan, R. and Rahmat, S.M. and Yusof, F. and Hassan, M.A. and Hamdi, M. and Fadzil, M. (2015) Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy. International Journal of Materials Research, 106 (3). pp. 258-266. ISSN 1862-5282

Moshwan, R. and Yusof, F. and Hassan, M.A. and Rahmat, S.M. (2015) Effect of tool rotational speed on force generation, microstructure and mechanical properties of friction stir welded Al-Mg-Cr-Mn (AA 5052-O) alloy. Materials & Design, 66. pp. 118-128. ISSN 0261-3069

Mostafizur, R.M. and Saidur, R. and Aziz, A.R.A. and Bhuiyan, M.H.U. (2015) Thermophysical properties of methanol based Al2O3 nanofluids. International Journal of Heat and Mass Transfer, 85. pp. 414-419. ISSN 0017-9310

Mousavi, S. and Ibrahim, S. and Aroua, M.K. (2013) Effects of operational parameters on the treatment of nitrate-rich wastewater by autohydrogenotrophic denitrifying bacteria. Water and Environment Journal. pp. 1-10. ISSN 17476585

Mousavi, S. and Ibrahim, S. and Aroua, M.K. (2012) Sequential nitrification and denitrification in a novel palm shell granular activated carbon twin-chamber upflow bio-electrochemical reactor for treating ammonium-rich wastewater. Bioresource Technology, 125. pp. 256-266. ISSN 0960-8524

Mousavi, S. and Ibrahim, S. and Aroua, M.K. and Ghafari, S. (2012) Development of nitrate elimination by autohydrogenotrophic bacteria in bio-electrochemical reactors - a review. Biochemical Engineering Journal, 67. pp. 251-264. ISSN 1369-703X

Mubarak, N.M. and Sahu, J.N. and Abdullah, E.C. and Jayakumar, N.S. and Ganesan, P. (2015) Microwave assisted multiwall carbon nanotubes enhancing Cd(II) adsorption capacity in aqueous media. Journal of Industrial and Engineering Chemistry, 24. pp. 24-33. ISSN 1226-086X

Mubin, A.S.A. and Ahmad, N. and Mamat, A. and Taha, Z. and Hasanuddin, I. (2015) CFD study of drag and lift of sepak takraw ball at different face orientations. Advances in Mechanical Engineering, 7 (1). p. 9. ISSN 1687-8132

Mueen, A. and Baba, M.S. and Zainuddin, R. (2007) Multilevel feature extraction and X-ray image classification. Applied Sciences, 7 (8). pp. 1224-1229. ISSN 1812-5654

Mueen, A. and Zainuddin, R. and Baba, M.S. (2008) Automatic multilevel medical image annotation and retrieval. Journal of Digital Imaging, 21 (3). pp. 290-295. ISSN 0897-1889

Mueen, A. and Zainuddin, R. and Baba, M.S. (2010) MIARS: A Medical Image Retrieval System. Journal of Medical Systems, 34 (5). pp. 859-864. ISSN 0148-5598

Muhamad, H. and Zainudin, B.H. and Zulhilmi, Z.A.M. and Abu Bakar, N.K. (2015) A rapid and cost effective ultrasonic solvent extraction method for determination of lambda-cyhalothrin and cypermethrin residues in soil. Journal of Oil Palm Research , 27 (4). pp. 377-386. ISSN 1511-2780

Muhammad, F.F. and Yahya, M.Y. and Hameed, S.S. and Aziz, F. and Sulaiman, K. and Rasheed, M.A. and Ahmad, Z. (2017) Employment of single-diode model to elucidate the variations in photovoltaic parameters under different electrical and thermal conditions. PLoS ONE, 12 (8). e0182925. ISSN 1932-6203

Mukherjee, S. and Mukhopadhyay, S. and Hashim, M.A. and Sen Gupta, B. (2015) Contemporary environmental issues of landfill leachate: Assessment and remedies. Contemporary environmental issues of landfill leachate: assessment & remedies, 45 (5). pp. 472-590. ISSN 1064-3389

Mukherjee, S. and Mukhopadhyay, S. and Pariatamby, A. and Hashim, M.A. and Sahu, J.N. and Sen Gupta, B. (2014) A comparative study of biopolymers and alum in the separation and recovery of pulp fibres from paper mill effluent by flocculation. Journal of Environmental Sciences (China), 26 (9). pp. 1851-1860. ISSN 1001-0742

Mukhlif, F. and Al-Gumaei, Y.A. and Noordin, K.A. (2018) Energy harvesting for efficient 5G networks. In: IEEE International Conference on Smart Computing and Electronic Enterprise (IEEE ICSCEE2018), 11-12 July 2018, Impiana KLCC Hotel, Kuala Lumpur, Malaysia..

Mukhopadhyay, S. and Hashim, M.A. and Allen, M. and Sen Gupta, B. (2014) Arsenic removal from soil with high iron content using a natural surfactant and phosphate. International Journal of Environmental Science and Technology. pp. 1-16. (In Press)

Mukhopadhyay, S. and Hashim, M.A. and Allen, M. and Sen Gupta, B. (2015) Arsenic removal from soil with high iron content using a natural surfactant and phosphate. International Journal of Environmental Science and Technology, 12 (2). pp. 617-632. ISSN 1735-1472

Mukhopadhyay, S. and Hashim, M.A. and Sahu, J.N. and Yusoff, I. and Sen Gupta, B. (2013) Comparison of a plant based natural surfactant with SDS for washing of As(V) from Fe rich soil. Comparison of a plant based natural surfactant with SDS for washing of As(V) from Fe rich soil, 25 (11). pp. 2247-2256. ISSN 1001-0742

Mukhopadhyay, S. and Mukherjee, S. and Hashim, M.A. and Sen Gupta, B. (2015) Application of colloidal gas aphron suspensions produced from Sapindus mukorossi for arsenic removal from contaminated soil. Chemosphere, 119. pp. 355-362.

Mukhtar, S.R. and Shanmugam, S.A. and Ibrahim, F. (2005) Development of a control system for laser doppler imaging scanning technique using labview. In: 2005 1st International Conference on Computers, Communications and Signal Processing with Special Track on Biomedical Engineering, CCSP 2005, 2005, Kuala Lumpur.

Munusamy, K. and Selamat, H. and Ibrahim, S. and Baba, M.S. (2011) A comparative study of process mediator components that support behavioral incompatibility. International Journal on Web Service Computing (IJWSC), 2 (3). pp. 11-30.

Murthy, G.R. and Arumugam, M.S. and Loo, C.K. (2009) Hybrid particle swarm optimization algorithm with fine tuning operators. International Journal of Bio-Inspired Computation, 1 (1-2). pp. 14-31. ISSN 1758-0366

Murugan, D. and Lau, Y.S. and Lau, W.C. and Mustafa, M.R. and Huang, Y. (2015) Angiotensin 1-7 protects against Angiotensin II-Induced Endoplasmic Reticulum Stress and Endothelial Dysfunction via Mas Receptor. PLoS ONE, 10 (12). ISSN 1932-6203

Muslimin, M. and Wilson, J.J. and Ghazali, A.R. and Braima, K.A. and Jeffery, J. and Wan-Nor, F. and Alaa-Eldin, M.E. and Mohd-Zin, S.W. and Wan-Yusoff, W.S. and Norma-Rashid, Y. and Lau, Y.L. and Rohela, M. and Abdul-Aziz, N.M. (2015) First report of brown widow spider sightings in Peninsular Malaysia and notes on its global distribution. Journal of Venomous Animals and Toxins Including Tropical Diseases, 21. p. 8. ISSN 1678-9199

Mustafa, M. and Ainon, R.N. and Zainuddin, R. and Md Don, Z. and Knowles, G. (2011) Assessing the naturalness of Malay emotional voice corpora. In: International Conference on Speech Database and Assessments, 26-28 Oct 2011, Hsinchu, Taiwan.

Mustayen, A.G.M.B. and Rahman, M.M. and Mekhilef, S. and Saidur, R. (2015) Performance evaluation of a solar powered air dryer for white oyster mushroom drying. International Journal of Green Energy, 12 (11). pp. 1113-1121. ISSN 1543-5075

N

Naderi, S. and Hassan, M.A. and Bushroa, A.R. (2015) Alternative methods to determine the elastoplastic properties of sintered hydroxyapatite from nanoindentation testing. Materials & Design, 67. pp. 360-368. ISSN 0261-3069

Nagara, G. and Lam, W.H. and Lee, N.C.H. and Othman, F. and Shaaban, M.G. (2015) Comparative SWOT analysis for water solutions in Asia and Africa. Water Resources Management, 29 (1). pp. 125-138. ISSN 0920-4741

Naji, Sinan and Zainuddin, Roziati and A. Jallb, Hamid and Zaid, Masoud Abou and Eldouber, Amar (2011) Neural network-based face detection with partial face pattern. In: International Arab Conference on Information Technology, 11-14 Dec 2011, Riyadh, Arab Saudi.

Nam, H.Y. and Raghavendran, H.R.B. and Pingguan-Murphy, Belinda and Abbas, A.A. and Merican, A.M. and Kamarul, Tunku (2017) Fate of tenogenic differentiation potential of human bone marrow stromal cells by uniaxial stretching affected by stretch-activated calcium channel agonist gadolinium. PLoS ONE, 12 (6). e0178117. ISSN 1932-6203

Narrein, K. and Sivasankaran, S. and Ganesan, P. (2015) TWO-PHASE ANALYSIS OF A HELICAL MICROCHANNEL HEAT SINK USING NANOFLUIDS. Numerical Heat Transfer Part A-Applications, 68 (11). pp. 1266-1279. ISSN 1040-7782

Narrein, K. and Sivasankaran, S. and Ganesan, P. (2015) Two-phase analysis of a helical microchannel heat sink using nanofluids. Numerical Heat Transfer Part a-Applications, 68 (11). pp. 1266-1279. ISSN 1040-7782

Nasir, M.H.N.M. and Hamid, S.S. and Noor, M.K.M. and Kasirun, Z.M. and Othman, M.K. (2011) Using agents to improve the usability of the PSP automated tool. International Journal of the Physical Sciences, 6 (21). pp. 4977-4989. ISSN 1992-1950

Nasir, N.F.M. and Raha, M.G. and Kadri, K.N. and Rampado, M. and Azlan, C.A. (2006) The study of morphological structure, phase structure and molecular structure of collagen-PEO 600K blends for tissue engineering application. American Journal of Biochemistry and Biotechnology, 2 (4). pp. 175-179.

Nasir, N.F.M. and Zain, N.M. and Raha, M.G. and Kadri, N.A. (2005) Characterization of chitosan-poly (ethylene oxide) blends as haemodialysis membrane. American Journal of Applied Sciences, 2 (12). pp. 1578-1583.

Nasiri-Tabrizi, B. and Zalnezhad, E. and Pingguan-Murphy, B. and Basirun, W.J. and Hamouda, A.M.S. and Baradaran, S. (2015) Structural and morphological study of mechanochemically synthesized crystalline nanoneedles of Zr-doped carbonated chlorapatite. Materials Letters, 149. pp. 100-104. ISSN 0167-577X

Nasrinahar, A. and Chuah, J.H. (2016) Effective route planning of a mobile robot for static and dynamic obstacle with fuzzy logic / Amir Nasrinahar and Joon Huang Chuah. In: 6th IEEE International Conference on Control System, Computing and Engineering , 25 - 27 November 2016, Penang, Malaysia.

Nee, L.S. and Khalil, M. and Jan, B.M. and Ali, B.S. (2015) Lightweight biopolymer drilling fluid for underbalanced drilling: An optimization study. Journal of Petroleum Science and Engineering, 129. pp. 178-188. ISSN 0920-4105

Neyamadpour, A. and Abdullah, W.A.T.W. and Taib, S. (2010) Inversion of quasi-3D DC resistivity imaging data using artificial neural networks. Journal of Earth System Science, 119 (1). pp. 27-40.

Neyamadpour, A. and Abdullah, W.A.T.W. and Taib, S. and Neyamadpour, B. (2010) Comparison of Wenner and dipole-dipole arrays in the study of an underground three-dimensional cavity. Journal of Geophysics and Engineering, 7 (1). pp. 30-40.

Ng, B.K. and Mohamad, Z.F. and Chandran, V.G.R. (2018) Public policy for grassroots innovations initiatives: lessons learned from Malaysia. In: Asialics Conference & Cialics Workshop 2018, 25-26 August 2018, ZijinGang Campus, Zhejiang University, Hangzhou, China.

Ng, C.G. and Yusoff, S. (2015) Assessment of GHG emission reduction potential from source-separated organic waste (SOW) management: Case study in a higher educational institution in Malaysia. Sains Malaysiana, 44 (2). pp. 193-201. ISSN 0126-6039

Ng, H.S. and Tan, C.P. and Mokhtar, M.N. and Ibrahim, S. and Ariff, A. and Ooi, C.W. and Ling, T.C. (2012) Recovery of Bacillus cereus cyclodextrin glycosyltransferase and recycling of phase components in an aqueous two-phase system using thermo-separating polymer. Separation and Purification Technology, 89. pp. 9-15. ISSN 1383-5866

Ng, K.H. (2012) The evolving landscape of scholarly publishing. In: Asia Pacific Association of Medical Editors Convention 2012, 31 August - 03 Sep 2012, Kuala Lumpur.

Ng, K.H. and Abdullah, B.J.J. and Kadri, N.A. (2008) A concern about plagiarism. Biomedical Imaging and Intervention Journal, 4 (2). ISSN 18235530 (ISSN)

Ng, K.H. and Abdullah, B.J.J. and Kadri, N.A. (2008) The journey so far. Biomedical Imaging and Intervention Journal, 4 (1). ISSN 18235530 (ISSN)

Ng, K.H. and Tan, L.K. and Kadri, N.A. and Lee, S.E. and Siow, H.L. (2006) Web-based educational portal on EMF for children. Bioengine. pp. 377-380.

Ng, Yee Sern and Sen Gupta, B. and Hashim, Mohd Ali (2015) Effects of operating parameters on the performance of washing-electrokinetic two stage process as soil remediation method for lead removal. Separation and Purification Technology, 156 (2). pp. 403-413. ISSN 1383-5866

Noor, M.B. and Ismail, M.A. and Khyasudeen, M.F. and Shariffuddin, A. and Kamel, N.I. and Azzuhri, Saaidal Razalli (2017) Autonomous precision landing for commercial UAV: A review. In: 7th International Conference on Electronic, Communication and Networks (CECNet 2017), 24-27 November 2017, National Dong Hwa University, Hualien, Taiwan.

Noor, R.M. and Edwards, C. (2011) Evaluating user class approach for network mobility protocol. Malaysian Journal of Computer Science, 24 (3). p. 131.

Noor, R.M. and Edwards, C. (2010) User class mechanisms for quality of service in network mobility. Scientific Research and Essays, 5 (24). pp. 3926-3931. ISSN 1992-2248

Noor, R.M. and Edwards, C. (2011) A comparative performance analysis on NEMO-QoS and MIPv6-QoS in heterogeneous environments. Journal of Applied Sciences, 11. pp. 3130-3141. ISSN 1812-5654

Noor, R.M. and Edwards, C. (2006) A dynamic QoS provisioning model for network mobility. The 7th Annual PostGraduate Symposium on The Convergence of Telecommunications, Networking and Broadcasting. pp. 26-27.

Noor, R.M. and Khorsandroo, S. (2011) Quality of experience key metrics framework for network mobility user. International Journal of the Physical Sciences, 6 (28). pp. 6521-6528. ISSN 1992 - 1950

Noraini, M.Y. and Ong, H.C. and Mohamed Jan, B. and Chong, W.T. (2014) A review on potential enzymatic reaction for biofuel production from algae. Renewable and Sustainable Energy Reviews, 39. pp. 24-34. ISSN 1364-0321

Norman, A.A. and Yasin, N.M. (2009) An analysis of information systems security management (issm): the hierarchical organizations vs. emergent organization. In: 4th International Conference for Internet Technology and Secured Transactions , 9-12 Nov 2009, London,UK.

Nosrati, S. and Jayakumar, N.S. and Hashim, M.A. and Mukhopadhyay, S. (2013) Performance evaluation on vanadium transport through supported liquid membrane by TOMAC as carrier. Performance evaluation on vanadium transport through supported liquid membrane by TOMAC as carrier, 44 (3). pp. 337-342. ISSN 1876-1070

Nouri, K. and Alam, M.A. and Mohammadhassani, M. and Bin Jumaat, M.Z. and Abna, A.H. (2015) Development of jute rope hybrid composite plate using carbon fibre. Structural Engineering and Mechanics, 56 (6). pp. 1095-1113. ISSN 1225-4568

Nur Farhani, Z. and Mohd Anuar, R. and Shaikh Mohd Saifuddeen, S.M.S. (2015) Ke arah pembangunan industri peranti perubatan halal: Isu-isu dalam rantaian bekalan halal. In: Prosiding Seminar Fiqh Semasa (SeFis), 10 Jun 2015, Dewan Kuliah Utama, Fakulti Pengajian Quran dan Sunnah (FPQS), Universiti Sains Islam Malaysia (USIM).

O

Ong, K.S. (1974) A finite-difference method to evaluate the thermal performance of a solar water heater. Solar Energy, 16 (3-4). pp. 137-147. ISSN 0038092X

Ooi, C.W. and Tan, C.P. and Hii, S.L. and Ariff, A. and Ibrahim, S. and Ling, T.C. (2011) Primary recovery of lipase derived from Burkholderia sp. ST8 with aqueous micellar two-phase system. Process Biochemistry, 46 (9). pp. 1847-1852. ISSN 1359-5113

Ooi, M.E. and Sayuti, M. and Sarhan, A.A.D. (2015) Fuzzy logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of aerospace AL tempered grade 6061. Journal of Cleaner Production, 89. pp. 286-295. ISSN 0959-6526

Oshkour, A.A. and Abu Osman, N.A. and Davoodi, M.M. and Bayat, M. and Yau, Y.H. and Wan Abas, W.A.B. (2011) Impact load and mechanical respond of tibiofemoral joint. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Oshkour, A.A. and Abu Osman, N.A. and Davoodi, M.M. and Bayat, M. and Yau, Y.H. and Wan Abas, W.A.B. (2011) Knee joint stress analysis in standing. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Oshkour, A.A. and Abu Osman, N.A. and Yau, Y.H. and Tarlochan, F. and Pramanik, S. and Wan Abas, W.A.B. (2013) Internal-external circumferential crack behaviour in the cement layer of total hip replacement. Fatigue & Fracture of Engineering Materials & Structures , 36 (7). pp. 586-601. ISSN 8756-758X

Oshkour, A.A. and Davoodi, M.M. and Abu Osman, N.A. and Yau, Y.H. and Tarlochan, F. and Wan Abas, W.A.B. (2013) Finite element analysis of circumferential crack behavior in cement-femoral prosthesis interface. Materials & Design, 49. pp. 96-102. ISSN 0261-3069

Oshkour, A.A. and Talebi, H. and Shirazi, S.F.S. and Yau, Y.H. and Pramanik, S. and Tarlochan, F. and Abu Osman, N.A. (2015) Parametric study of radial functionally graded femoral prostheses with different geometries. Meccanica, 50 (7). pp. 1657-1678. ISSN 0025-6455

Oshkour, Azim Ataollahi and Abu Osman, Noor Azuan and Davoodi, M.M. and Yau, Y.H. and Tarlochan, F. and Wan Abas, Wan Abu Bakar and Bayat, M. (2013) Finite element analysis on longitudinal and radial functionally graded femoral prosthesis. International Journal for Numerical Methods in Biomedical Engineering, 29 (12). pp. 1412-1427. ISSN 2040-7939

Othman, M.F. and Bushroa, A.R. and Abdullah, W.N.R. (2015) Evaluation techniques and improvements of adhesion strength for tin coating in tool applications: A review. Journal of Adhesion Science And Technology, 29 (7). pp. 569-591.

Othman, S.H. and Ibrahim, F. and Omar, S.Z. and Rahim, R.B.A. (2008) Flexion relaxation phenomenon of back muscles in discriminating between healthy and chronic low back pain women. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Ow, S.H. and Lim, P.S (2008) Development of e-sign dictionary using 3D technology for the deaf community. In: International Business Information Management Association Conference, 4-6 Jan 2008, Marrakech, Morocco.

P

Pai, Y.S. and Yap, H.J. and Singh, R. (2015) Augmented reality-based programming, planning and simulation of a robotic work cell. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 229 (6). pp. 1029-1045. ISSN 0954-4054

Palash, S.M. and Masjuki, Haji Hassan and Kalam, M.A. and Atabani, A.E. and Fattah, I.M.R. and Sanjid, Ahmed (2015) Biodiesel production, characterization, diesel engine performance, and emission characteristics of methyl esters from aphanamixis polystachya oil of Bangladesh. Energy Conversion and Management, 91. pp. 149-157. ISSN 0196-8904

Palavalli, N.D. and Yaghoubi, A. and Lai, C.C. and Tin, C.C. and Javey, A. and Chueh, Y.L. (2015) Catalyst-dependent morphological evolution by interfacial stress in crystalline-amorphous core-shell germanium nanowires. RSC Advances, 5 (36). pp. 28454-28459. ISSN 2046-2069

Panjehpour, M. and Chai, H.K. and Voo, Y.L. (2015) Refinement of strut-and-tie model for reinforced concrete deep beams. PLoS ONE, 10 (6). p. 17. ISSN 1932-6203

Parker, E. and Vessillier, S. and Pingguan-Murphy, B. and Wan Abas, W.A.B. and Bader, D.L. and Chowdhury, T.T. (2013) Low oxygen tension increased fibronectin fragment induced catabolic activities - response prevented with biomechanical signals. Arthritis Research & Therapy, 15 (5). R163. ISSN 1478-6354

Paul, M.C. and Dhar, A. and Das, S. and Latiff, A.A. and Ahmad, M.T. and Harun, Sulaiman Wadi (2015) Development of nanoengineered thulium-doped fiber laser with low threshold pump power and tunable operating wavelength. IEEE Photonics Journal, 7 (1). ISSN 1943-0655

Peake, N.J. and Pavlov, A.M. and D'Souza, A. and Pingguan-Murphy, B. and Sukhorukov, G.B. and Hobbs, A.J. and Chowdhury, T.T. (2015) Controlled release of C-type natriuretic peptide by microencapsulation dampens proinflammatory effects induced by IL-1 beta in cartilage explants. Biomacromolecules, 16 (2). pp. 524-531. ISSN 1525-7797

Peruš, M. and Bischof, H. and Caulfield, H.J. and Loo, C.K. (2004) Quantum-implementable selective reconstruction of high-resolution images. Applied Optics, 43 (33). pp. 6134-6138. ISSN 1539-4522

Peruš, M. and Bischof, H. and Loo, C.K. (2005) Bio-computational model of object-recognition: quantum Hebbian processing with neurally shaped Gabor wavelets. Biosystems, 82 (2). pp. 116-126. ISSN 0303-2647

Peyman, J. and Akbar Nozari, A. and Soin, N. and Ibrahim, F. (2009) Evaluation of pressure changes for capillary and fishbone valves in Lab-on-CD systems. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.

Por, L.Y. (2007) IDD personalization framework for e-learning. In: International Symposium on Information Technologies and Applications in Education, 23-25 Nov 2007, Kunming, China.

Poznanski, R.R. and Ng, L.S. and Woo, C.S. (2010) A method for estimating gap-junctional conductance between ca3 hippocampal pyramidal neurons. Journal of Integrative Neuroscience, 9 (01). pp. 49-64. ISSN 0219-6352

Primasari, B. and Ibrahim, S. and Annuar, M.S.M. and Remmie, L.X.I. (2011) Aerobic treatment of oily wastewater: effect of aeration and sludge concentration to pollutant reduction and PHB accumulation. World Academy of Science, Engineering and Technology, 78. pp. 172-176. ISSN 2010376X (ISSN)

Q

Qabajeh, L.K. and Kiah, M.L.M. and Qabajeh, M. (2009) A qualitative comparison of position-based routing protocols for ad-hoc networks. International Journal of Computer Science and Network, 9 (2). pp. 131-140.

Qabajeh, L.K. and Kiah, M.L.M. and Qabajeh, M.M. (2011) Secure unicast position-based routing protocols for Ad-Hoc networks. Acta Polytechnica Hungarica, 8 (6). pp. 191-214.

Qabajeh, L.K. and Kiah, M.L.M. and Qabajeh, M.M. (2012) A more secure and scalable routing protocol for mobile ad hoc networks. Security and Communication Networks. ISSN 1939-0122

Qabajeh, L.K. and Kiah, M.L.M. and Qabajeh, M.M. (2009) A scalable and secure position-based routing protocols for ad-hoc networks. Malaysian Journal of Computer Science, 22 (2). pp. 99-120. ISSN 0127-9084

Qeshta, I.M.I. and Shafigh, P. and Jumaat, M.Z. (2015) Flexural behaviour of RC beams strengthened with wire mesh-epoxy composite. Construction and Building Materials, 79. pp. 104-114. ISSN 0950-0618

Qi, H. and Huang, G.Y. and Han, Y.L. and Zhang, X.H. and Li, Y.H. and Pingguan-Murphy, B. and Lu, T.J. and Xu, F. and Wang, L. (2015) Engineering artificial machines from designable DNA materials for biomedical applications. Tissue Engineering Part B-Reviews, 21 (3). pp. 288-297. ISSN 1937-3368

Quek, L.X and Ghani, A.A. and Badruldin, M.H. and Saidin, M. and Harith, Z.Z.T. and Roselee, M.H. (2015) Platinum group elements in proximal impactites of the Bukit Bunuh impact structure, Malaysia. Current Science, 109 (12). pp. 2303-2308. ISSN 0011-3891

Qurashi, A. and Irfan, M.F. and Alam, M.W. (2010) In2O3 nanostructures and their chemical and biosensor applications. Arabian Journal for Science and Engineering, 35 (1C). pp. 125-145.

R

Rad, S.K. and Kanthimathi, M.S. and Abd Malek, S.N. and Lee, G.S. and Looi, C.Y. and Wong, W.F. (2015) Cinnamomum cassia Suppresses Caspase-9 through Stimulation of AKT1 in MCF-7 Cells but Not in MDA-MB-231 Cells. PLoS ONE, 10 (12). ISSN 1932-6203

Radjai, T. and Gaubert, J.P. and Rahmani, L. and Mekhilef, S. (2015) Experimental verification of P&O MPPT algorithm with direct control based on Fuzzy logic control using CUK converter. International Transactions on Electrical Energy Systems, 25 (12). pp. 3492-3508. ISSN 2050-7038

Radjai, T. and Rahmani, L. and Mekhilef, S. and Gaubert, J.P. (2014) Implementation of a modified incremental conductance MPPT algorithm with direct control based on a fuzzy duty cycle change estimator using dSPACE. Solar Energy, 110. pp. 325-337.

Rafieerad, A.R. and Zalnezhad, E. and Bushroa, A.R. and Hamouda, A.M.S. and Sarraf, M. and Nasiri-Tabrizi, B. (2015) Self-organized TiO2 nanotube layer on Ti–6Al–7Nb for biomedical application. Surface & Coatings Technology, 265. pp. 24-31. ISSN 0257-8972

Rahim, H.A. and Ibrahim, F. and Taib, M.N. (2008) Model order selection criterion for monitoring haemoglobin status in dengue patients using ARX model. In: 5th International Conference on Information Technology and Applications in Biomedicine, ITAB 2008 in conjunction with 2nd International Symposium and Summer School on Biomedical and Health Engineering, IS3BHE 2008, 2008, Shenzhen.

Rahim, H.A. and Ibrahim, F. and Taib, M.N. (2007) A novel prediction system in dengue fever using NARMAX model. In: International Conference on Control, Automation and Systems, ICCAS 2007, 2007, Seoul.

Rahim, N.A. and Radzi, M.A.M. (2010) DSP-based flexible digital hysteresis in switched capacitor active power filter. IEICE Electronics Express, 7 (9). pp. 621-627.

Rahim, R. and Abdul Raman, A.A. (2015) Cleaner production implementation in a fruit juice production plant. Journal of Cleaner Production, 101. pp. 215-221. ISSN 0959-6526

Rahimifar, M. and Salim, S.S. (2012) Structuring persistent chat conversations: experimental results of the chatsistance tool. Knowledge and Information Systems. pp. 1-21. ISSN 0219-1377

Rahman, A.M.S. and Chia, P.Y. and Haseeb, A.S. Md. Abdul (2015) Mechanical properties of intermetallic compounds in electrodeposited multilayered thin film at small scale by nanoindentation. Materials Letters, 147. pp. 50-53. ISSN 0167-577X

Rahman, H.A. and Rahim, H.R.A. and Harun, Sulaiman Wadi and Yasin, M. and Apsari, R. and Ahmad, Harith and Wan Abas, Wan Abu Bakar (2013) Detection of stain formation on teeth by oral antiseptic solution using fiber optic displacement sensor. Optics and Laser Technology, 45 (1). pp. 336-341. ISSN 0030-3992

Rahman, M.D.A. and Said, S.M. and Balamurugan, S. (2015) Blue phase liquid crystal: Strategies for phase stabilization and device development. Science and Technology of Advanced Materials, 16 (3). p. 21. ISSN 1468-6996

Rahman, M.M. and Jumaat, M.Z. and Rahman, M.A. and Qeshta, I.M.I. (2015) Innovative hybrid bonding method for strengthening reinforced concrete beam in flexure. Construction and Building Materials, 79. pp. 370-378. ISSN 0950-0618

Rahman, M.M. and Mustayen, A.G.M.B. and Mekhilef, S. and Saidur, R. (2015) The optimization of solar drying of grain by using a genetic algorithm. International Journal of Green Energy, 12 (12). pp. 1222-1231. ISSN 1543-5075

Rahman, M.M. and Oztop, H.F. and Mekhilef, S. and Saidur, R. and Orfi, J. (2015) Simulation of unsteady heat and mass transport with heatline and massline in a partially heated open cavity. Applied Mathematical Modelling, 39 (5-6). pp. 1597-1615. ISSN 0307-904X

Rahman, M.M. and Saha, S. and Mojumder, S. and Naim, A.G. and Saidur, R. and Ibrahim, T.A. (2015) Effect of sine-squared thermal boundary condition on augmentation of heat transfer in a triangular solar collector filled with different nanofluids. Numerical Heat Transfer Part B-Fundamentals, 68 (1). pp. 53-74. ISSN 1040-7790

Rahman, Mohammad Zahidur and Lee, Sai Peck (2000) Sealed-bid auction protocol implementation over CORBA architecture. Malaysian Journal of Computer Science, 14 (2). pp. 95-105.

Raja, J.E. and Loo, C.K. and Rao, M.V.C. (2007) The necessity of a non-linear & non-stationary data processing in engineering and the new Hilbert Huang Transform (HHT). Journal of College Science in India, 1 (3).

Raja Ghazilla, R.A. and Taha, Z. (2009) Development of a framework for disassemblability design optimization for sustainable manufacturing. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)

Raja Yusof, R.J. and Zainuddin, R. and Mohd Yusoff, Z. (2010) Parallel versus perpendicular plots. In: Trends in Electronics Conference, 21-24 Nov 2010, Fukuoka, Japan.

Rajendran, S. and Arof, Hamzah and Ibrahim, Fatimah and Yegappan, S. (2008) Review on technical aspects of image acquisition, analysis and retrieval for leukaemia cells. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Rajendran, S. and Arof, Hamzah and Mokhtar, N. and Mubin, M. and Yegappan, S. and Ibrahim, Fatimah (2011) Dual modality search and retrieval technique analysis for leukemic information system. Scientific Research and Essays, 6 (2). pp. 247-255. ISSN 1992-2248

Rakhshandehroo, M. and Yusof, M.J.M. and Ale Ebrahim, N. and Sharghi, A. and Arabi, R. (2015) 100 most cited articles in urban green and open spaces: A bibliometric analysis. Current World Environment, 10 (2). pp. 445-455. ISSN 0973-4929

Rakib, M.I. and Choudhury, I.A. and Hussain, S. and Abu Osman, N.A (2015) Design and biomechanical performance analysis of a user-friendly orthotic device. Materials & Design, 65. pp. 716-725. ISSN 0261-3069

Ramakrishnan, K. and Yasin, N.M. (2012) Employment issues among Malaysian information and communication technology (ICT) graduates: a case study. African Journal of Business Management, 6 (16). pp. 5615-5621. ISSN 1993-8233

Ramesh, S. and Gan, C.J. and Bang, L.T. and Niakan, A. and Tan, C.Y. and Purbolaksono, J. and Chandran, H. and Ramesh, S. and Yap, B.K. and Teng, W.D. (2015) Effects of two-step sintering on the properties of hydroxyapatite bioceramic. Journal of Ceramic Processing Research , 16 (6). pp. 683-689. ISSN 1229-9162

Ramesh, S. and Tan, S.S. and Bang, L.T. and Tan, C.Y. and Purbolaksono, J. and Ramesh, S. and Teng, W.D. (2015) Effects of sintering profile on the densification behaviour of forsterite ceramics. Journal of Ceramic Processing Research , 16 (6). pp. 722-728. ISSN 1229-9162

Ramli, R. and Arof, Hamzah and Ibrahim, Fatimah and Idris, Mohd Yamani Idna and Khairuddin, A.S.M. (2015) Classification of eyelid position and eyeball movement using EEG signals. Malaysian Journal of Computer Science, 28 (1). pp. 28-45. ISSN 0127-9084

Ramli, R. and Arof, Hamzah and Ibrahim, Fatimah and Mokhtar, Norrima and Idris, Mohd Yamani Idna (2015) Using finite state machine and a hybrid of EEG signal and EOG artifacts for an asynchronous wheelchair navigation. Expert Systems with Applications, 42 (5). pp. 2451-2463. ISSN 0957-4174

Ranathunga, L. and Zainuddin, R. and Abdullah, N.A. (2010) Compacted dither pattern codes over MPEG-7 dominant colour descriptor in video visual depiction. Malaysian Journal of Computer Science, 23 (2). pp. 68-84. ISSN 0127-9084

Rashidi, H.R. and Sulaiman, N.M.N. and Hashim, N.A. and Hassan, C.R.C. and Ramli, M.R. (2015) Synthetic reactive dye wastewater treatment by using nano-membrane filtration. Desalination and Water Treatment, 55 (1). pp. 86-95. ISSN 1944-3994

Rasiah, R. (2008) Electronic clustering and technological intensities in Indonesia and Malaysia. In: ASIALICS International Conference, 2-4 April 2008, Bangalore, India. (Submitted)

Ratnavelu, K. and Kalpana, M. and Balasubramaniam, P. and Wong, K. and Raveendran, P. (2017) Image encryption method based on chaotic fuzzy cellular neural networks. Signal Processing, 140. pp. 87-96. ISSN 0165-1684

Raval, R.R. and Ale Ebrahim, N. and Ahmed, S. and Taha, Z. (2010) Work together… when apart challenges and what is need for effective virtual teams. Journal of Information, Knowledge and Research in Business Management and Administration, 1 (1). pp. 1-3. ISSN 0975 – 671X

Raymond, W.J.K. and Illias, H.A. and Abu Bakar, A.H. and Mokhlis, H. (2015) Partial discharge classifications: Review of recent progress. Measurement, 68. pp. 164-181. ISSN 0263-2241

Raza, S. and Mokhlis, Hazlie and Arof, Hamzah and Laghari, J.A. and Wang, L. (2015) Application of signal processing techniques for islanding detection of distributed generation in distribution network : A review. Energy Conversion and Management, 96. pp. 613-624. ISSN 0196-8904

Razali, R. and Abu Osman, N.A. and Shasmin, H.N. and Usman, J. and Wan Abas, W.A.B. (2006) Acceptable load carriage for primary school girls. European Journal of Scientific Research, 15 (3). pp. 396-403. ISSN 1450216X

Razavi, A.M. and Ahamad, R. (2011) Dealing with human issues throughout systems implementation: Guidelines from a psychodynamic perspective. In: 3rd International Conference on Information and Financial Engineering, 19-21 Aug 2011, Shanghai, China.

Razman, R. and Wan Abas, Wan Abu Bakar and Abu Osman, N.A. and Cheong, J.P.G. (2011) Temporal characteristics of the final delivery phase and its relation to tenpin bowling performance. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Refai, M. and Sharieh, A. and Alshammari, F. (2010) Leader election algorithm in 2D torus networks with the presence of one link failure. International Arab Journal of Information Technology, 7 (2). pp. 105-114.

Reham, S.S. and Masjuki, Haji Hassan and Kalam, M.A. and Shancita, I. and Fattah, I.M.R. and Ruhul, A.M. (2015) Study on stability, fuel properties, engine combustion, performance and emission characteristics of biofuel emulsion. Renewable & Sustainable Energy Reviews, 52. pp. 1566-1579. ISSN 1364-0321

Rehman, M.A. and Yusoff, I. and Alias, Y. (2015) Fluoride adsorption by doped and un-doped magnetic ferrites CuCexFe2-xO4: Preparation, characterization, optimization and modeling for effectual remediation technologies. Journal of Hazardous Materials, 299. pp. 316-324. ISSN 0304-3894

Rifat, A.A. and Mahdiraji, Ghafour Amouzad and Chow, D.M. and Shee, Yu Gang and Ahmed, R. and Adikan, Faisal Rafiq Mahamd (2015) Photonic crystal fiber-based surface plasmon resonance sensor with selective analyte channels and graphene-silver deposited core. Sensors, 15 (5). pp. 11499-11510. ISSN 1424-8220

Rizwanul Fattah, M. and Masjuki, Haji Hassan and Kalam, M.A. and Masum, B.M. (2013) Effect of synthetic antioxidants on storage stability of calophyllum inophyllum biodiesel. In: 1st International Conference on the Science & Engineering of Materials, 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Rosdin, R.Z.R. and Ali, N.M. and Arof, Hamzah and Harun, Sulaiman Wadi (2015) A passively harmonically mode-locked soliton erbium-doped fiber laser with low pumping threshold using a single-walled carbon nanotubes. Microwave and Optical Technology Letters, 57 (4). pp. 799-803. ISSN 0895-2477

Roslah , J. and Zainab, A.N. (2007) Identifying what services need to be improved by measuring the library's performance. Malaysian Journal of Library & Information Science, 12 (1). pp. 35-53.

Roy, S. and Ramiah, H. and Reza, A.W. (2015) Designing a new high gain CMOS amplifier towards a 17.22 MHz MEMS based Si oscillator for a cost effective clock generator IC. IEICE Electronics Express, 12 (10). p. 8. ISSN 1349-2543

Ruiz Estrada, M.A. and Yap, S.F. (2010) The openness growth monitoring model (OGM-Model): A note for JPM readers. Journal of Policy Modeling, 32 (4). pp. 589-592.

Rusly, S.M. and Ibrahim, S. (2010) Adsorption of textile reactive dye by palm shell activated carbon: response surface methodology. World Academy of Science, Engineering and Technology, 43. pp. 892-895. ISSN 2010376X (ISSN)

Ruthiraan, M. and Mubarak, N.M. and Thines, R.K. and Abdullah, E.C. and Sahu, J.N. and Jayakumar, N.S. and Ganesan, P. (2015) Comparative kinetic study of functionalized carbon nanotubes and magnetic biochar for removal of Cd2+ ions from wastewater. Korean Journal of Chemical Engineering, 32 (3). pp. 446-457. ISSN 0256-1115

S

Sabran, M.B.S. and Jusoh, Z. and Babar, I.M. and Ahmad, Harith and Harun, Sulaiman Wadi (2015) Dual-wavelength passively Q-switched erbium ytterbium codoped fiber laser based on a nonlinear polarization rotation technique. Microwave and Optical Technology Letters, 57 (3). pp. 530-533. ISSN 0895-2477

Sabri, M.F.M. and Ono, T. and Said, S.M. and Kawai, Y. and Esashi, M. (2015) Fabrication and characterization of microstacked PZT actuator for MEMS applications. Journal of Microelectromechanical Systems, 24 (1). pp. 80-90. ISSN 1057-7157

Sabzoi, N. and Yong, E.K. and Jayakumar, N.S. and Sahu, J.N. and Ganesan, P. and Mubarak, N.M. and Mazari, S.A. (2015) An optimisation study for catalytic hydrolysis of oil palm shell using response surface methodology. Journal of Oil Palm Research , 27 (4). pp. 339-351. ISSN 1511-2780

Sadeghinezhad, E. and Togun, H. and Mehrali, M. and Nejad, P.S. and Latibari, S.T. and Abdulrazzaq, T. and Kazi, S.N. and Metselaar, H.S.C. (2015) An experimental and numerical investigation of heat transfer enhancement for graphene nanoplatelets nanofluids in turbulent flow conditions. International Journal of Heat and Mass Transfer, 81. pp. 41-51. ISSN 0017-9310

Safahieh, H. and Sanni, S.A. and Zainab, A.N. (2011) International Contribution to Nipah Virus Research 1999-2010. Malaysian Journal of Library & Information Science, 17 (3). pp. 35-47.

Safee, M.K.M. and Wan Abas, W.A.B. and Abu Osman, N.A. and Ibrahim, F. (2011) Activity of upper body muscles during bowing and prostration tasks in healthy subjects. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Safee, M.K.M. and Wan Abas, W.A.B. and Abu Osman, N.A. and Ibrahim, F. (2011) Activity of upper body muscles during bowing and prostration tasks in healthy subjects. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Safee, M.K.M. and Wan Abas, W.A.B. and Ibrahim, F. and Abu Osman, N.A. and Salahuddin, M.H.R. (2012) Electromyographic activity of the lower limb muscles during salat and specific exercises. Journal of Physical Therapy Science, 24 (6). pp. 549-552. ISSN 0915-5287

Safee, M.K.M. and Wan Abas, W.A.B. and Ibrahim, F. and Abu Osman, N.A. and Salahuddin, M.H.R. (2012) Electromyographic activity of the lower limb muscles during salat and specific exercises. Journal of Physical Therapy Science, 24 (6). pp. 549-552. ISSN 0915-5287

Said, S.H. and Razak, H.A. and Othman, I. (2015) Flexural behavior of engineered cementitious composite (ECC) slabs with polyvinyl alcohol fibers. Construction and Building Materials, 75. pp. 176-188. ISSN 0950-0618

Said, Z. and Sabiha, M.A. and Saidur, R. and Hepbasli, A. and Rahim, N.A. and Mekhilef, S. and Ward, T.A. (2015) Performance enhancement of a flat plate solar collector using titanium dioxide nanofluid and polyethylene glycol dispersant. Journal of Cleaner Production, 92. pp. 343-353. ISSN 0959-6526

Said, Z. and Sajid, M.H. and Alim, M.A. and Saidur, R. (2013) Viscosity data of al203/water and al2031 (eg/water) mixture nanofluids and the hysteresis phenomenon. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Said, Z. and Sajid, M.H. and Saidur, R. and Mahdiraji, G.A. and Rahim, N.A. (2015) Evaluating the optical properties of TiO2 nanofluid for a direct absorption solar collector. Numerical Heat Transfer Part a-Applications, 67 (9). pp. 1010-1027. ISSN 1040-7782

Saidin, N. and Harun, Sulaiman Wadi and Ahmad, Harith and Ali, S.M.M. and Damanhuri, S.S.A. and Halder, A. and Paul, M.C. and Das, S. and Pal, M. and Bhadra, S.K. (2015) Enhancement of thulium-Ytterbium doped fiber laser efficiency using dual-pumping method. Microwave and Optical Technology Letters, 57 (2). pp. 285-287. ISSN 0895-2477

Sairi, N.A. and Abd Ghani, N. and Aroua, M.K. and Yusoff, R. and Alias, Y. (2015) Low pressure solubilities of CO2 in guanidinium trifluoromethanesulfonate-MDEA systems. Fluid Phase Equilibria, 385. pp. 79-91. ISSN 0378-3812

Sajjadi, B. and Abdul Aziz, A.R. and Baroutian, S. and Ibrahim, S. (2013) Investigation of convection and diffusion during biodiesel production in packed membrane reactor using 3D simulation. Journal of Industrial and Engineering Chemistry. pp. 1-12. ISSN 1226086X

Sajjadi, B. and Abdul Raman, A.A. and Baroutian, S. and Ibrahim, S. and Raja Ehsan Shah, R.S.S. (2014) 3D Simulation of fatty acid methyl ester production in a packed membrane reactor. Fuel Processing Technology, 118. pp. 7-19. ISSN 0378-3820

Sajjadi, B. and Abdul Raman, A.A. and Ibrahim, S. (2015) Influence of ultrasound power on acoustic streaming and micro-bubbles formations in a low frequency sono-reactor: Mathematical and 3D computational simulation. Ultrasonics Sonochemistry, 24. pp. 193-203. ISSN 1350-4177

Sajjadi, B. and Abdul Raman, A.A. and Ibrahim, S. and Shah, R.S.S.R.E. (2012) Review on gas-liquid mixing analysis in multiscale stirred vessel using CFD. Reviews in Chemical Engineering, 28 (2-3). pp. 171-189. ISSN 0167-8299

Sajjadi, B. and Abdul Raman, A.A. and Shah, R.S.S.R.E. and Ibrahim, S. (2013) Review on Applicable breakup/coalescence models in turbulent liquid-liquid flows. Reviews in Chemical Engineering, 29 (3). pp. 131-158. ISSN 0167-8299

Sajjadi, B. and Aziz, A.R.A. and Ibrahim, S. (2015) Mechanistic analysis of cavitation assisted transesterification on biodiesel characteristics. Ultrasonics Sonochemistry, 22. pp. 463-473. ISSN 1350-4177

Saka, S. and Munusamy, M.V. and Shibata, M. and Tono, Y. and Miyafuji, H. (2008) Chemical constituents of the different anatomical parts of the oil palm (Elaeis guineensis) for their sustainable utilization. In: Seminar Proceedings - Natural Resources & Energy Environment JSPS-VCC Program on Environmental Science, Engineering and Ethics (Group IX), 24-25 November 2008, Kyoto, Japan.

Salaheldeen, M. and Aroua, M.K. and Mariod, A.A. and Cheng, S.F. and Abdelrahman, M.A. and Atabani, A.E. (2015) Physicochemical characterization and thermal behavior of biodiesel and biodiesel diesel blends derived from crude Moringa peregrina seed oil. Energy Conversion and Management, 92. pp. 535-542. ISSN 0196-8904

Salahuddin, M.H.R. and Wan Abas, Wan Abu Bakar and Abu Osman, N.A. and Ibrahim, Fatimah and Rahim, R.B.A. (2008) Preliminary study: The impact of moderate exercises on biomechanical response of the humans muscles. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Salahuddin, M.H.R. and Wan Abas, Wan Abu Bakar and Abu Osman, N.A. and Ibrahim, Fatimah and Rahim, R.B.A. (2008) Preliminary study: the impact of moderate exercises on biomechanical response of the humans muscles. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Salbiah, S. and Somaya, A. and Arof, Hamzah and Saleh, Z.S. and Ibrahim, Fatimah (2012) A new approach to medical image stitching using minimum average correlation energy filter and peak to side-lobe ratio. International Journal of Imaging Systems and Technology, 22 (3). pp. 166-171. ISSN 0899-9457

Salim, S.S. and Asemi, A. and Champiri, Z.D. and Shahamiri, S.R. (2014) Multi-Criteria impact assessment of MVML in performance of interactive systems for people with disabilities. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.

Salim, S.S. and Raja Zainal Abidin, R.N.A.Z. (2006) Eliciting specification for a web-based distance-learning system from lecturers and students in Malaysia. Asian Journal of Distance Education, 4 (1). pp. 56-66. ISSN 1347-9008

Salleh, N.A. and Lim, K.S. and Ibrahim, F. (2009) AR modeling as EEG spectral analysis on prostration. In: International Conference for Technical Postgraduates 2009, TECHPOS 2009, 2009, Kuala Lumpur.

Samsudin, S. and Adwan, S. and Arof, Hamzah and Mokhtar, Norrima and Ibrahim, F. (2012) Development of automated image stitching system for radiographic images. Journal of Digital Imaging, 26 (2). pp. 361-70. ISSN 0897-1889

Sanjid, A. and Masjuki, Haji Hassan and Kalam, M.A. and Rahman, S.M.A. and Abedin, M.J. and Fattah, I.M.R. (2015) Characterization and prediction of blend properties and evaluation of engine performance and emission parameters of a CI engine operated with various biodiesel blends. RSC Advances, 5 (17). pp. 13246-13255. ISSN 2046-2069

Sanni, S.A. and Zainab, A.N. (2011) Evaluating the influence of a medical journal using Google Scholar. Learned Publishing, 24 (2). pp. 145-154. ISSN 0953-1513

Sanni, S.A. and Zainab, A.N. (2011) Measuring the influence of a journal using impact and diffusion factors. Malaysian Journal of Library & Information Science, 16 (2). pp. 127-140. ISSN 1394-6234

Sardareh, S.A. and Aghabozorgi, S. and Dutt, A. (2014) Reflective dialogues and students’ problem solving ability analysis using clustering. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.

Sarhan, A.A.D. and Matsubara, A. (2015) Investigation about the characterization of machine tool spindle stiffness for intelligent CNC end milling. Robotics and Computer-Integrated Manufacturing, 34. pp. 133-139. ISSN 0736-5845

Sattari, Mohammad Reza Jabbarpour and Noor, Rafidah Md and Keshavarz, Hassan (2012) A taxonomy for congestion control algorithms in vehicular ad hoc networks. In: 2012 IEEE International Conference on Communication, Networks and Satellite (COMNETSAT 2012), 12-14 July 2012, Bali, Indonesia.

Sayeed, S. and Andrews, S. and Besar, R. and Kiong, L.C. (2008) Forgery detection in dynamic signature verification by entailing principal component analysis. Discrete Dynamics in Nature and Society, 2007. ISSN 1026-0226

Seeme, Fatima Bilkis and Arafat, Abdullah Omar and Dimyati, Kaharudin (2010) QoS improvement for multimedia traffic in WLANs with TTN approach. International Journal of the Physical Sciences, 5 (6). pp. 847-851. ISSN 1992-1950

Seera, M. and Lim, C.P. and Liew, W.S. and Lim, E. and Loo, C.K. (2015) Classification of electrocardiogram and auscultatory blood pressure signals using machine learning models. Expert Systems with Applications, 42 (7). pp. 3643-3652. ISSN 0957-4174

Seiffert, J. and Hussain, F. and Wiegman, C. and Li, F. and Bey, L. and Baker, W. and Porter, A. and Ryan, M.P. and Chang, Y. and Gow, A. and Zhang, J.F. and Zhu, J. and Tetley, T.D. and Chung, K.F. (2015) Pulmonary toxicity of instilled silver nanoparticles: Influence of size, coating and rat strain. PLoS ONE, 10 (3). p. 17. ISSN 1932-6203

Sen, B.K. (1996) An enquiry into the information retrieval efficiency of LISA plus database. Malaysian Journal of Library & Information Science, 1 (1). pp. 67-84.

Sen Gupta, I. and Ibrahim, S. and Ramachandran, K.B. (2001) Production of 2,3-butanediol from blackstrap molasses. Chemie-Ingenieur-Technik, 73 (6). p. 654. ISSN 0009286X

Senanayake, S.M.N. and Kiong, L.C. and Gouwanda, D. (2011) Real-time stability measurement system for postural control. Journal of Bodywork and Movement Therapies, 15 (4). pp. 453-464. ISSN 1360-8592

Seng, W.C. and Chitsaz, M. (2010) Handgrip strength evaluation using neuro fuzzy approach. Malaysian Journal of Computer Science, 23 (3). p. 166. ISSN 0127-9084

Seng, W.C. and Chitsaz, M. (2013) Medical image segmentation using a multi-agent system. International Arab Journal of Information Technology, 10 (33).

Seng, W.C. and Fong, L.L. and Shing, N.L. and Noudeh, S.A.H. (2011) Robust watermarking using hand gesture for enhanced authentication. Malaysian Journal of Computer Science, 24 (2). p. 98. ISSN 0127-9084

Seng, W.C. and Mirisaee, S.H. (2011) A simple approach for education using virtual human dataset. International Arab Journal of e-Technology , 2 (1). pp. 29-35. ISSN 1997-6364

Shafie, S.M. and Mahlia, Teuku Meurah Indra and Masjuki, Haji Hassan and Andriyana, Andri (2011) Current energy usage and sustainable energy in Malaysia: A review. Renewable & Sustainable Energy Reviews, 15 (9). pp. 4370-4377. ISSN 1364-0321

Shafie, S.M. and Masjuki, Haji Hassan and Mahlia, Teuku Meurah Indra (2014) Rice straw supply chain for electricity generation in Malaysia: Economical and environmental assessment. Applied Energy, 135. pp. 299-308. ISSN 0306-2619

Shahi, S. and Harun, Sulaiman Wadi and Norizan, S.F. and Moghaddam, M.R.A. and Ahmad, Harith (2010) Brillouin-raman multi-wavelength laser comb generation based on BI-EDF by using dual-wavelength in dispersion compensating fiber. Journal of Nonlinear Optical Physics & Materials, 19 (1). pp. 123-130. ISSN 0218-8635

Shahmohamadi, P. and Che-Ani, A.I. and Ramly, A. and Maulud, K.N.A. and Mohd-Nor, M.F.I. (2010) Reducing urban heat island effects: A systematic review to achieve energy consumption balance. International Journal of the Physical Sciences, 5 (6). pp. 626-636.

Shaikha, Z. (1982) Program lawatan sambil belajar di University of Washington, Amerika Syarikat. KEKAL ABADI - Berita Perpustakaan Universiti Malaya, 1 (1). pp. 1-6.

Shakib, M.N. and Moghavvemi, M. and Mahadi, W.N.L. (2015) Design of a compact planar antenna for ultra-wideband operation. Applied Computational Electromagnetics Society Journal, 30 (2). pp. 222-229. ISSN 1054-4887

Shamiri, A. and Wong, S.W. and Zanil, M.F. and Hussain, M.A. and Mostoufi, N. (2015) Modified two-phase model with hybrid control for gas phase propylene copolymerization in fluidized bed reactors. Chemical Engineering Journal, 264. pp. 706-719. ISSN 1385-8947

Shamshirband, Shahaboddin and Petkovic, Dalibor and Javidnia, Hossein and Gani, A. (2015) Sensor data fusion by support vector regression methodology-A comparative study. IEEE Sensors Journal, 15 (2). pp. 850-854. ISSN 1530-437X

Shamsulaman, K. and Abdullah, F. (2007) Study of Insect pest in mangifera indica plantation, Chuping, Perlis, Malaysia. In: The 12th Biological Sciences Graduate Congress 2007, 17-19 December 2007, Institute of Biological Sciences, Faculty of Science, University of Malaya.

Sharifah Noor Nazim, S.Y. and Ati Rosemary, M.A. and Muhammad Azzam, I. (2014) Building energy index and students’ perceived performance in public university buildings. In: World Renewable Energy Congress 2014., August 2014, London, United Kingdom..

Sharifah Noor Nazim, S.Y. and Ati Rosemary, M.A. and Muhammad Azzam, I. (2014) Conventional buildings versus green buildings: Perception of building occupants. In: 14th SCA International Conference., June 2014, Kuala Lumpur, Malaysia..

Sharifah Noor Nazim, S.Y. and Ati Rosemary, M.A. and Muhammad Azzam, I. (2014) Factors contributing to occupants’ comfort : A survey among occupants of academic buildings in a public university. In: Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management., 07 - 09 January 2014, Bali, Indonesia..

Sharifah Noor Nazim, S.Y. and Ati Rosemary, M.A. and Muhammad Azzam, I. (2014) Green potential rating tool: An assessment of green potential for conventional buildings. Journal of Buildings Performance., 5 (1). pp. 1-12.

Sharifah Noor Nazim, S.Y. and Ati Rosemary, M.A. and MuhammazAzzam, I. (2014) Green buildings in campus: An assessment of green potential for existing conventional buildings. In: 1st Regional Conference on Campus Sustainability., April 2014, Sabah, Malaysia.

Sharma, R.K. and Ganesan, P. and Tyagi, V.V. and Metselaar, H.S.C. and Sandaran, S.C. (2015) Developments in organic solid-liquid phase change materials and their applications in thermal energy storage. Energy Conversion and Management, 95. pp. 193-228. ISSN 0196-8904

Sharouny, H. and Omar, R. (2014) Iatrogenic aspiration of custom-made keel: A case report. Iranian Red Crescent Medical Journal, 16 (12).

Shasmin, H.N. and Abu Osman, N.A. and Razali, R. and Usman, J. and Wan Abas, W.A.B. (2007) The effect of load carriage among primary school boys: a preliminary study. Journal of Mechanics in Medicine and Biology, 7 (3). pp. 265-274. ISSN 0219-5194

Shi, M. and Ling, K. and Yong, K.W. and Li, Y. and Feng, S. and Zhang, X. and Pingguan-Murphy, B. and Lu, T.J. and Xu, F. (2015) High-Throughput Non-Contact Vitrification of Cell-Laden Droplets Based on Cell Printing. Scientific Reports, 5. ISSN 2045-2322

Shiman, F. and Molaei, F. and Oladazimi, M. and Abd Rashid, R. and Habil, H. and Ibrahim, F. (2012) Electro-acupuncture (EA) as an adjunct therapy to methadone maintenance treatment (MMT) in heroin addiction: a study of 2D EEG power spectral topography and Morlet wavelet. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Shiman, F. and Safavi, S.H. and Vaneghi, F.M. and Oladazimi, M. and Safari, M.J. and Ibrahim, F. (2012) EEG feature extraction using parametric and non-parametric models. In: IEEE-EMBS International Conference on Biomedical and Health Informatics, BHI 2012. In Conj. with the 8th Int. Symp.on Medical Devices and Biosensors and the 7th Int. Symp. on Biomedical and Health Engineering, 2012, Hong Kong and Shenzhen.

Shirazi, F.S. and Mehrali, M. and Oshkour, A.A. and Metselaar, H.S.C. and Kadri, N.A. and Abu Osman, N.A. (2015) Characterization and mechanical properties of calcium silicate/citric acid-based polymer composite materials. International Journal of Applied Ceramic Technology, 12 (2). pp. 371-376. ISSN 1546-542X

Shirazi, M.R. and Harun, Sulaiman Wadi and Ahmad, Harith (2015) Effective use of an EDFA and Raman pump residual powers via a Bi-EDF in L-band multi-wavelength fiber laser generation. Laser Physics, 25 (1). ISSN 1054-660X

Shirkhorshidi, A.S. and Aghabozorgi, S. and Wah, T.Y. (2015) A Comparison Study on Similarity and Dissimilarity Measures in Clustering Continuous Data. PLoS ONE, 10 (12). ISSN 1932-6203

Shivakumara, P. and Sharma, N. and Pal, U. and Blumenstein, M. and Tan, C.L. (2014) Gradient-angular-features for word-wise video script identification. In: International Conference on Pattern Recognition (ICPR), 24-28 Aug 2014, Stockholm, Sweden. (Submitted)

Shnawah, D.A. and Sabri, M.F.M. and Badruddin, I.A. and Said, S.M. and Bashir, M.B.A. and Sharif, N.M. and Elsheikh, M.H. (2015) Study on coarsening of Ag3Sn intermetallic compound in the Fe-modified Sn-1Ag-0.5Cu solder alloys. Journal of Alloys and Compounds, 622. pp. 184-188. ISSN 0925-8388

Shokripour, R. and Anvik, J. and Kasirun, Z.M. and Zamani, S. (2014) Improving automatic bug assignment using time-metadata in term-weighting. IETsoftware, 8 (6). pp. 269-278.

Shuib, A.S. and Siraj, Saedah and Abdullah, M.R.T.L. (2010) M-learning curriculum design for secondary school: A needs analysis. In: International Conference on Education and Information Technologies, 28-30 Jun 2010, Paris,France.

Shuib, L. and Normadhi, A.B.A. (2015) Reading material personalization searching in e-learning. In: Global Conference on Teaching and Learning With Technology, 10-11 June 2015, Orchard Road, Singapore. (Submitted)

Silitonga, A.S. and Atabani, A.E. and Mahlia, T.M.I. and Sebayang, A.H. (2011) Techno-economic analysis and environmental impact of fuel economy labels for passenger cars in Indonesia. Renewable & Sustainable Energy Reviews, 15 (9). pp. 5212-5217.

Sim, L.C. and Ng, K.W. and Ibrahim, S. and Saravanan, P. (2013) Preparation of improved p-n junction NiO/TiO2 nanotubes for solar-energy-driven light photocatalysis. International Journal of Photoenergy, 2013. ISSN 1110-662X

Simon, S. (2016) Concrete like a nation is ambitious. In: The Impossibility of Mapping (Urban Asia), 24 - 25 November 2016, Nanyang Technological University, Centre for Contemporary Art, Singapore.

Solaymani, S. and Kardooni, R. and Yusoff, S. and Kari, F. (2015) The impacts of climate change policies on the transportation sector. Energy, 81. pp. 719-728. ISSN 0360-5442

Soltanian, Mohammad Reza K. and Amiri, Iraj Sadegh and Alavi, S. Ehsan and Ahmad, Harith (2015) Dual-Wavelength Erbium-Doped Fiber Laser to Generate Terahertz Radiation Using Photonic Crystal Fiber. Journal of Lightwave Technology (JLT), 33 (24). pp. 5038-5046. ISSN 0733-8724

Soon, C. and Wei, H.L. (2012) A study of ship's propeller jet induced scour. In: 2nd Conference for Regional Cooperation in Ocean and Earth Science Research in the South China Sea, 21-24 October 2012, University of Malaya, Kuala Lumpur, Malaysia.

Sorayya, M. and Baba, M.S. (2012) Supervised and unsupervised artificial neural networks for analysis of diatom abundance in tropical Putrajaya Lake, Malaysia. Sains Malaysiana, 41 (8). pp. 939-947. ISSN 0126-6039

Sulaiman, A. and Soo, M.J. and Yoon, M.M.L. and Farid, M. and Silva, F.V.M. (2015) Modeling the polyphenoloxidase inactivation kinetics in pear, apple and strawberry purees after high pressure processing. Journal of Food Engineering, 147. pp. 89-94. ISSN 0260-8774

Sulaiman, K. and Fakir, M.S. and Yusli, M.N. and Abd. Wahab, F. (2011) Organic photovoltaic devices incorporating nanostructures in the photoactive layer: Towards clean solar energy generation. In: SET 2011, 10th International Conference on Sustainable Energy Technologies, 04-07 Sep 2011, Istanbul, Turkey.

Sulaiman, S.S. and Annuar, M.S.M. and Abdul Razak, N.N. and Ibrahim, S. and Bakar, B. (2013) Triarylmethane dye decolorization by pellets of pycnoporus sanguineus: statistical optimization and effects of novel impeller geometry. Bioremediation Journal, 17 (4). pp. 305-315. ISSN shaliza@um.edu.my

Sun, Zhen Tao and Gani, Abdullah and Sun, Xiu Ying and Liu, Ning (2011) Improving QoS Of WiMAX By ondemand bandwidth allocation based on PMP mode. Journal of Computers, 6 (10). pp. 2187-2195. ISSN 1796-203X

Sunil, W. and Zainab, A.N. (2002) An exploratory study of collection development of selected school resource centres in Sri Lanka. Malaysian Journal of Library & Information Science, 7 (1). pp. 31-42. ISSN 1394-6234

Swee, T.L. and Abrizah, A. (2005) The status of school library automation in Malaysian Chinese secondary schools: A national survey. Malaysian Journal of Library & Information Science , 10 (1). pp. 29-48.

Syaima, M.T.S. and Ong, K.H. and Noor, I.M. and Zamratul, M.I.M. and Brahim, S.A. and Hafizul, M.M. (2015) The synthesis of bio-lubricant based oil by hydrolysis and non-catalytic of palm oil mill effluent (POME) using lipase. Renewable and Sustainable Energy Reviews, 44. pp. 669-675. ISSN 1364-0321

Syed Abdul Kadir, S.L. and Husin, S. and Nadarajah, D. (2014) The impact of ICT on quality of life. In: Advances In Business Related Scientific Research Conference 2014, 10-12 Dec 2014, Milan, Italy. (Submitted)

Syed Ali, B. (2015) A systematic review of ADS-B performance monitoring methods. In: 2015 ATRS World Conference, 02-05 July 2015, University Town, National University of Singapore. (Submitted)

Syed Yahya, S.N.N. and Ariffin, A.R.M. and Ismail, M.A. (2015) Building energy index and student’s perceived performance in public university buildings. In: Renewable Energy in the Service of Mankind. Springer International Publishing., Switzerland, pp. 1-7.

Syed Yahya, S.N.N. and Mohd Ariffin, A.R. and Ismail, M.A. (2015) Energy consumption vs. users' perceptions: A quantitative study of energy and comfort in university campus. In: Passive Low Energy Architecture (PLEA) 2015: Architure in revolution, 09-11 September 2015, Bologna.Italy.

T

Taha, Z. and Deboucha, A. and Dahari, M. (2010) Small-scale helicopter system identification model using recurrent neural networks. In: Trends in Electronics Conference, 21-24 Nov 2010, Fukuoka, Japan.

Taha, Z. and Muhammad, M.Z. (2009) Evaluation of corporate initiatives in ergonomics: Effectiveness of ergonomics training in an oil and gas refinery company. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)

Taha, Z. and Sakundarini, N. and Raja Ghazilla, R.A. and Gonzalez, J. (2009) An intelligent approach to recyclability evaluation in automobile design. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)

Taha, Z. and Yap, H.J. and Raja Ghazilla, R.A. and Ahmad, N. (2009) The ergonomics virtual reality station design (ErgoVR). In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)

Tahir, A. and Ahmad, R. and Kasirun, Z.M. (2010) Maintainability dynamic metrics data collection based on aspect-oriented technology. Malaysian Journal of Computer Science, 23 (3). pp. 177-194. ISSN 0127-9084

Tahriri, F. and Dabbagh, M. and Ale Ebrahim, N. (2014) Supplier assessment and selection using fuzzy analytic hierarchy process in a steel manufacturing company. Journal of Scientific Research and Reports, 3 (10). pp. 1319-1338. ISSN 2320–0227

Tahriri, F. and Mousavi, M. and Yap, H.J. and Zawiah, M.D.S. and Taha, Z. (2015) Optimizing the robot arm movement time using virtual reality robotic teaching system. International Journal of Simulation Modelling, 14 (1). pp. 28-38. ISSN 1726-4529

Tam, S.S. and Kan, N.H. and Ng, L.L. (2010) Low proficiency learners in synchronous computer-assisted and face-to-face interactions. Turkish Online Journal of Educational Technology, 9 (3). pp. 61-75.

Tamrin, K.F. and Nukman, Y. and Choudhury, I.A. and Shirley, S. (2015) Multiple-objective optimization in precision laser cutting of different thermoplastics. Optics and Lasers in Engineering, 67. pp. 57-65. ISSN 0143-8166

Tan, C.Y. and Ramesh, S. and Teh, Y.C. and Tan, Y.M. and Yap, B.K. (2015) The effects of calcium-to-phosphorus ratio on the densification and mechanical properties of hydroxyapatite ceramic. International Journal of Applied Ceramic Technology, 12 (1). pp. 223-227. ISSN 1546-542X

Tan, K.H. and Johan, M.R. and Ahmad, R. and Kadri, N.A. and Zain, N.M. and Arof, Abdul Kariem (2012) Mechanical analysis of the effects of different mechanical alloying periods on Ni3Al intermetallic compound fabrication quality. International Journal of Electrochemical Science, 7 (4). pp. 3765-3772. ISSN 1452-3981

Tan, K.S. and Wong, Y.H. and Cheong, K.Y. (2015) Thermal characteristic of sintered Ag-Cu nanopaste for high-temperature die-attach application. International Journal of Thermal Sciences, 87. pp. 169-177. ISSN 1290-0729

Tan, W.R. and Chan, C.S. and Yogarajah, P. and Condell, J. (2012) A fusion approach for efficient human skin detection. IEEE Transactions on Industrial Informatics, 8 (1). pp. 138-147. ISSN 1551-3203

Tan, Y.Q. and Ibrahim, F. and Moghavvemi, M. (2007) Two electrodes low voltage input EEG amplifier for brain-computer-interface. In: 2007 International Conference on Intelligent and Advanced Systems, ICIAS 2007, 2007, Kuala Lumpur.

Tang, A. and Zain, S. and Abdullah, R. (2010) Development and evaluation of a chemistry educational software for learning organic reactions using qualitative reasoning. International Journal of Education and Information Technologies, 4 (3). pp. 129-138.

Tang, A.Y.C. and Abdullah, R. and Zain, S.M. and Rahman, N.A. (2009) Generating qualitative causal graph using modeling constructs of qualitative process theory for explaining organic chemistry reactions. International Journal of Information Technology, 5 (1). pp. 1-11.

Tang, A.Y.C. and Abdullah, R.H. and Zain, S.M. (2011) Development of a simulator for explaining organic chemical reactions based on qualitative process theory. World Academy of Science, Engineering and Technology, 57. pp. 22-27.

Tang, A.Y.C. and Zain, S.M. and Rahman, N.A. and Abdullah, R. (2009) Deriving causal explanation from qualitative model reasoning. Proceedings of the World Academy of Science, Engineering And Technology, 59. pp. 29-36.

Taur, A. and Doshi, P. and Yeoh, H.K. (2015) Dripping dynamics of Newtonian liquids from a tilted nozzle. European Journal of Mechanics B-Fluids, 51. pp. 8-15. ISSN 0997-7546

Tay, N.W. and Loo, C.K. and Perus, M. (2010) Application of gabor wavelet in Quantum Holography for image recognition. International Journal of Nanotechnology and Molecular Computation (IJNMC), 2 (1). pp. 44-61.

Tay, N.W. and Loo, C.K. and Perus, M. (2010) Face recognition with quantum associative networks using overcomplete gabor wavelet. Cognitive Computation, 2 (4). pp. 297-302. ISSN 1866-9956

Tay, S.L. and Chen, Wei-wei and Wei, Xiao-jin and Yao, Cai-zhen and Gao, W. (2015) Properties of Zn-Bi composite coatings prepared by ionic co-discharge deposition. Transactions of Nonferrous Metals Society of China, 25 (1). pp. 199-205. ISSN 1003-6326

Tay, S.L. and Haseeb, A.S. Md. Abdul and Johan, M.R. (2011) Addition of cobalt nanoparticles into Sn-3.8Ag-0.7Cu lead-free solder by paste mixing. Soldering & Surface Mount Technology, 23 (1). pp. 10-14. ISSN 0954-0911

Teh, K.H. and Wong, S.F. (1996) Developing a CDS ISIS-based online cataloguing and information retrieval interfaces for use in small libraries. Malaysian Journal of Library & Information Science, 1 (1). pp. 1-20. ISSN 1394-6234

Teh, Y.W. and Ng, H.P. and Ching, S.H. (2009) Design and development of collaborative workflow for lean production in a repair and overhaul industry. In: 8th Proceedings of the WSEAS International Conference on Applied Computer and Applied Computational Science , 20-22 May 2009, Hangzhou, China.

TermehYousefi, A. and Tateno, K. and Bagheri, S. and Tanaka, H. (2017) Development of Frequency Based Taste Receptors Using Bioinspired Glucose Nanobiosensor. Scientific Reports, 7 (1). pp. 1-9. ISSN 2045-2322

Tham, L.K. and Abu Osman, N.A. and Lim, K.S. and Pingguan-Murphy, B. and Wan Abas, W.A.B. and Zain, N.M. (2011) Investigation to predict patellar tendon reflex using motion analysis technique. Medical Engineering & Physics, 33 (4). pp. 407-410. ISSN 1350-4533

Tham, L.K. and Abu Osman, N.A. and Lim, K.S. and Pingguan-Murphy, Belinda and Wan Abas, Wan Abu Bakar (2011) Quantification of patellar tendon reflex by motion analysis. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Tham, L.K. and Abu Osman, N.A. and Wan Abas, W.A.B. and Lim, K.S. (2013) The validity and reliability of motion analysis in patellar tendon reflex assessment. PLoS ONE, 8 (2). e55702. ISSN 1932-6203

Tham, M.L. and Chow, C.O. and Xu, Y.H. (2015) Impact of Random Packet Arrival on the Performance of Video Streaming over OFDMA Downlink Systems. Wireless Personal Communications, 85 (3). pp. 655-669. ISSN 0929-6212

Thangalazhy-Gopakumar, S. and Al-Nadheri, W.M.A. and Jegarajan, D. and Sahu, J.N. and Mubarak, N.M. and Nizamuddin, S. (2015) Utilization of palm oil sludge through pyrolysis for bio-oil and bio-char production. Bioresource Technology, 178. pp. 65-69. ISSN 0960-8524

Tharsika, T. and Haseeb, A.S. Md. Abdul and Akbar, S.A. and Sabri, M.F.M. and Wong, Y.H. (2015) Gas sensing properties of zinc stannate (Zn2SnO4) nanowires prepared by carbon, assisted thermal evaporation process. Journal of Alloys and Compounds, 618. pp. 455-462. ISSN 0925-8388

Tharsika, T. and Haseeb, A.S. Md. Abdul and Akbar, S.A. and Thanihaichelvan, M. (2015) Tailoring ZnO nanostructures by spray pyrolysis and thermal annealing. Ceramics International, 41 (3). pp. 5205-5211. ISSN 0272-8842

Tharsika , T. and Haseeb, A.S. Md. Abdul and Mohd Faizul, M.S. (2013) Fabrication and characterization of ZnO-Sn02 mixed nanostructures. In: 1st International Conference on the Science & Engineering of Materials, 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Thiam, K.C. and Renaud, K.V. (2009) A component-based reverse engineering approach: decomposing web pages to facilitate maintenance and reusability. In: Proceedings of the IASK International Conferences E-Activity and Leading Technologies & InterTIC 2009, 22-24 June 2009, Seville, Spain.

Thio, T. and Nozari, A.A. and Soin, N. and Kahar, M.K.B.A. and Dawal, S.Z.M. and Samra, K.A. and Madou, M. and Ibrahim, F. (2011) Hybrid capillary-flap valve for vapor control in point-of-care microfluidic CD. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 2011, Kuala Lumpur.

Thio, T.H.G. and Ibrahim, F. and Al-Faqheri, W. and Moebius, J. and Khalid, N.S. and Soin, N. and Kahar, M.K.B.A. and Madou, M. (2013) Push pull microfluidics on a multi-level 3D CD. Lab on a Chip - Miniaturisation for Chemistry and Biology, 13 (16). pp. 3199-3209. ISSN 1473-0189

Thio, T.H.G. and Ibrahim, F. and Al-Faqheri, W. and Soin, N. and Abdul Kahar, M.K.B. and Madou, M. (2013) Multi-level 3D implementation of thermo-pneumatic pumping on centrifugal microfluidic CD platforms. In: 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2013, 2013, Osaka.

Thio, T.H.G. and Soroori, S. and Ibrahim, F. and Al-Faqheri, W. and Soin, N. and Kulinsky, L. and Madou, M. (2013) Theoretical development and critical analysis of burst frequency equations for passive valves on centrifugal microfluidic platforms. Medical and Biological Engineering and Computing, 51 (5). pp. 525-535. ISSN 0140-0118

Thirucelvam, K. and Ahmad, K.Z. and Mat Zin, M. (2008) Attracting talent from abroad: Malaysia's experience. In: ASIALICS International Conference, 2-4 April 2008, Bangalore, India. (Submitted)

Ting, T.O. and Rao, M.V.C. and Loo, C.K. (2006) A novel approach for unit commitment problem via an effective hybrid particle swarm optimization. IEEE Transactions on Power Systems, 21 (1). pp. 411-418. ISSN 0885-8950

Ting, T.O. and Rao, M.V.C. and Loo, C.K. and Ngu, S.S. (2003) Solving unit commitment problem using hybrid particle swarm optimization. Journal of Heuristics, 9 (6). pp. 507-520. ISSN 1381-1231

Tiu, Zian Cheak and Aidit, S.N. and Hassan, N.A. and Ismail, Mohammad Faizal and Ahmad, Harith (2016) Single and Double Brillouin Frequency Spacing Multi-Wavelength Brillouin Erbium Fiber Laser With Micro-Air Gap Cavity. IEEE Journal of Quantum Electronics, 52 (9). pp. 1-5. ISSN 0018-9197

Tong, G.B. and Ab. Ghani, S.M. and Abdul Rahman, S. (2007) Crystallinity and Si-H bonding configuration of nc-Si:H films grown by Layer-by-layer (LBL) deposition technique at different RF power. In: International Workshop and Conference on Nanotechnology , 12-15 June 2007, Bangi, Malaysia. (Submitted)

Tripathi, M. and Sahu, J.N. and Ganesan, P. and Monash, P. and Dey, T.K. (2015) Effect of microwave frequency on dielectric properties of oil palm shell (OPS) and OPS char synthesized by microwave pyrolysis of OPS. Journal of Analytical and Applied Pyrolysis, 112. pp. 306-312. ISSN 0165-2370

Tuan, Z. and Farazila, Y. and Mohd, H. and Tadashi, A. (2013) Brazing of inconel 600 by active filler metal. In: 1st International Conference on the Science & Engineering of Materials , 13-14 November 2013, Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Tun, S. and Ithoi, I. and Mahmud, R. and Samsudin, N.I. and Heng, C.K. and Ling, L.Y. (2015) Detection of Helminth Eggs and Identification of Hookworm Species in Stray Cats, Dogs and Soil from Klang Valley, Malaysia. PLoS ONE, 10 (12). ISSN 1932-6203

U

Uddin, M. and Mekhilef, S. and Rivera, M. (2015) Experimental validation of minimum cost function-based model predictive converter control with efficient reference tracking. IET Power Electronics, 8 (2). pp. 278-287. ISSN 1755-4543

Uddin, M. and Mekhilef, S. and Rivera, M. and Rodriguez, J. (2015) Imposed weighting factor optimization method for torque ripple reduction of IM fed by indirect matrix converter with predictive control algorithm. Journal of Electrical Engineering & Technology, 10 (1). pp. 227-242. ISSN 1975-0102

Uddin, M.N. and Daud, W.M.A.W. and Abbas, H.F. (2015) Co-production of hydrogen and carbon nanofibers from methane decomposition over zeolite Y supported Ni catalysts. Energy Conversion and Management, 90. pp. 218-229. ISSN 0196-8904

Ugochi Isika, N. and Ismail, M.A. (2012) SemKnow: A semantic knowledge management system for scholarly repositories. In: International Conference on Information Society, 25-28 June 2012, London, UK.

Ullah, K.R. and Akikur, R.K. and Ping, H.W. and Saidur, R. and Hajimolana, S.A. and Hussain, M.A. (2015) An experimental investigation on a single tubular SOFC for renewable energy based cogeneration system. Energy Conversion and Management, 94. pp. 139-149. ISSN 0196-8904

Ullah, M.H. and Ahsan, M.R. and Mahadi, W.N.L.W. and Latef, T.A. and Uddin, M.J. (2015) Isolation improvement of dual feed patch antenna by assimilating metasurface ground. Microwave and Optical Technology Letters, 57 (6). pp. 1406-1409. ISSN 0895-2477

Ullah, M.H. and Uddin, M.J. and Latef, T.A. and Mahadi, W.N.L. and Ahsan, M.R. and Islam, M.T. (2015) Constitutive parameter analysis of left-handed dual-star split-ring resonator metamaterial for homogeneous infinite slab. IET Microwaves Antennas & Propagation, 9 (15). pp. 1740-1746. ISSN 1751-8725

Usman, M. and Daud, W. and Abbas, H.F. (2015) Dry reforming of methane: Influence of process parameters-A review. Renewable & Sustainable Energy Reviews, 45. pp. 710-744. ISSN 710-744

Usop, Z. and Sarhan, A.A.D. and Mardi, N.A. and Wahab, M.N.A. (2015) Measuring of positioning, circularity and static errors of a CNC vertical machining centre for validating the machining accuracy. Flow Measurement and Instrumentation, 61. pp. 39-50. ISSN 0263-2241

V

Vaneghi, F.M. and Oladazimi, M. and Shiman, F. and Kordi, A. and Safari, M.J. and Ibrahim, F. (2012) A comparative approach to ECG feature extraction methods. In: 3rd International Conference on Intelligent Systems Modelling and Simulation, ISMS 2012, 2012, Kota Kinabalu.

Varman, M. and Miyafuji, H. and Saka, S. (2010) Fractionation and characterization of oil palm (Elaeis guineensis) as treated by supercritical water. Journal of Wood Science, 56 (6). pp. 484-494.

Varman, M. and Saka, S. (2015) A comparative evaluation of phenolic hydroxyl content of oil palm. Journal of Oil Palm Research , 27 (4). pp. 360-365. ISSN 1511-2780

Varman, M. and Saka, S. (2011) A comparative study of oil palm and Japanese beech on their fractionation and characterization as treated by supercritical water. Waste and Biomass Valorization, 2 (3). pp. 309-315. ISSN 1877-2641

Vijayaletchumy, M. (2012) Before and after knowledge management initiatives: After action review. Jurnal Persatuan Pustakawan Malaysia, 6. pp. 1-8.

Vimala, B. and Chin Lay, G. (2015) Mobile technology and interactive lectures: The key adoption factors. In: Proceedings of the International Mobile Learning Festival 2015: Mobile Learning , MOOCs and 21st Century Learning, 21-23 May, 2015, Hong Kong SAR China.

Vimala, B. and Kaur, W. (2016) Bilingual sentiment detection - Investigating impact of tweet translation. In: Seventh International Conference on the Applications Digital Information and Web Technologies (ICADIWT 2016), 28 - 31 March 2016, Taipei, Taiwan.

W

Wakil, M.A. and Kalam, M.A. and Masjuki, Haji Hassan and Atabani, A.E. and Fattah, I.M.R. (2015) Influence of biodiesel blending on physicochemical properties and importance of mathematical model for predicting the properties of biodiesel blend. Energy Conversion and Management, 94. pp. 51-67. ISSN 0196-8904

Wan Abas, W.A.B. (1995) Stress stabilization behaviors in skin under small tensile loads in-Vitro. Bio-Medical Materials and Engineering, 5 (2). pp. 59-63. ISSN 0959-2989

Wan Abas, W.A.B. and Barbenel, J.C. (1982) Uniaxial tension test of human-skin invivo. Journal of Biomedical Engineering, 4 (1). pp. 65-71. ISSN 0141-5425

Wan Mohamed Radzi, C.W.J. and Jenatabadi, H.S. and Hasbullah, M. (2015) Firm Sustainability Performance Index Modeling. Sustainability, 7 (12). pp. 16196-16212. ISSN 2071-1050

Wang, H.C. and He, Y.T. and Sun, H.Y. and Qiu, Z.R. and Xie, D. and Mei, T. and Tin, C.C. and Feng, Z.C. (2015) Temperature dependence of raman scattering in 4H-SiC films under different growth conditions. Chinese Physics Letters, 32 (4). p. 5. ISSN 0256-307X

Wazed, M.A. and Ahmed, S. and Bin Yusoff, N. (2008) A review of commonality models in manufacturing resources planning: state-of-the-art and future directions. In: International Conference Technology Management and Innovation in China: Challenges and Opportunities in the 21st Century, 2008.

Wazed, M.A. and Ahmed, S. and Nukman, Y. (2010) Impacts of quality and processing time uncertainties in multistage production system. International Journal of The Physical Sciences, 5 (6). pp. 814-825.

Wazed, M.A. and Ahmed, S. and Nukman, Y. (2010) A review of manufacturing resources planning models under different uncertainties: State-of-the-art and future directions. South African Journal of Industrial Engineering, 21 (1). pp. 17-33.

Wazed, M.A. and Ahmed, S. and Yusoff, N. (2010) Impacts of common components in multistage production system under uncertain conditions. In: International Conference on Industrial Engineering and Operations Management (IEOM2010) , January 9-10, Dhaka, Bangladesh.

Wee, L.L. and Annuar, M.S.B.M. and Ibrahim, S. (2011) Short communication: energetics of glucoamylase-catalyzed hydrolysis of commercial sago starch. Asia-Pacific Journal of Molecular Biology and Biotechnology, 19 (4). pp. 117-120. ISSN 01287451

Wee, L.L. and Annuar, M.S.M. and Ibrahim, S. and Chisti, Y. (2011) Enzyme-mediated production of sugars from sago starch: statistical process optimization. Chemical Engineering Communications, 198 (11). pp. 1339-1353. ISSN 0098-6445

Wee, W.H. and Azhar Abdul Razak, M. and Kadri, N.A. (2012) Dielectrophoretic K562 cell entrapment device using benchtop microfluidics fabrication. Advanced Science Letters, 15 (1). pp. 1-4. ISSN 19366612 (ISSN)

Wee, W.H. and Razak, M.A.A. and Kadri, N.A. (2012) Electrochemical cell entrapment device for BioMEMS applications using benchtop fabrication techniques. International Journal of Electrochemical Science, 7. pp. 11588-11595.

Wei, X.J. and Yang, Z.D. and See, L.T. and Silva, F.V.M. and Wei, G. (2013) A novel polymer based antimicrobial coating with embedded copper or copper salt particles. In: 1st International conference on the Science & Engineering of Materials , Sunway Putra Hotel, Kuala Lumpur, Malaysia.

Wong, C.Y. and Fung, H.N. (2016) Mapping the dynamic co-evolution of technological convergence. In: International Workshop University-Industry Linkages and Innovation , 18 February 2016, Centre for Science, Technology and Innovation Policy Studies, Kyushu University, Japan.

Wong, C.Y. and Hu, M.C. and Shiu, J.W. (2015) Collaboration between Public Research Institutes and Universities: A Study of Industrial Technology Research Institute, Taiwan. Science, Technology and Society, 20 (2). pp. 161-181. ISSN 0971-7218

Wong, C.Y. and Hu, M.C. and Shiu, J.W. (2015) Governing the Economic Transition: How Taiwan Transformed its Industrial System to Attain Virtuous Cycle Development. Review of Policy Research, 32 (3). pp. 365-387. ISSN 1541-132X

Wong, C.Y. and Wang, L. (2015) Trajectories of science and technology and their co-evolution in BRICS: Insights from publication and patent analysis. Journal of Informetrics, 9 (1). pp. 90-101. ISSN 1751-1577

Wong, S.Y. and Yap, K.S. and Yap, H.J. and Tan, S.C. (2015) A Truly Online Learning Algorithm using Hybrid Fuzzy ARTMAP and Online Extreme Learning Machine for Pattern Classification. Neural Processing Letters, 42 (3). pp. 585-602. ISSN 1370-4621

Wong, W.K. and Choo, C.W. and Loo, C.K. and Teh, J.P. (2010) FPGA implementation of log-polar mapping. International Journal of Computer Applications in Technology, 39 (1). pp. 12-18. ISSN 1741-5047

Wong, W.K. and Loo, C.K. and Lim, W.S. (2010) Optical approach based omnidirectional thermal visualization. International Journal of Image Processing (IJIP), 4 (3). p. 263. ISSN 1985-2304

Wong, W.K. and Loo, C.K. and Lim, W.S. and Tan, P.N. (2010) Thermal condition monitoring system using log-polar mapping, quaternion correlation and max-product fuzzy neural network classification. Neurocomputing, 74 (1-3). pp. 164-177. ISSN 0925-2312

Wong, W.K. and Tan, P.N. and Loo, C.K. and Lim, W.S. (2010) Omnidirectional surveillance system using thermal camera. Journal of Computer Science and Engineering, 3 (2). pp. 42-51.

Woo, C.S. and Jiang, D. and Binh, P. (2009) Semi fragile watermark with self authentication and self recovery. Malaysian Journal of Computer Science, 22 (1). pp. 64-84. ISSN 0127-9084

X

Xu, J. and Shivakumara, P. and Lu, T. and Phan, T.Q. and Tan, C.L. (2014) Graphics and scene text classification in video. In: International Conference on Pattern Recognition (ICPR), 24-28 Aug 2014, Stockholm, Sweden. (Submitted)

Xu, J. and Shivakumara, P. and Lu, T. and Tan, C.L. (2014) 2D and 3D video scene text classification. In: International Conference on Pattern Recognition (ICPR) , 24-28 Aug 2014, Stockholm, Sweden. (Submitted)

Xu, X.Y. and Akay, A. and Wei, H.L. and Wang, S.Q. and Pingguan-Murphy, B. and Erlandsson, B.E. and Li, X.J. and Lee, W. and Hu, J. and Wang, L. and Xu, F. (2015) Advances in smartphone-based point-of-care diagnostics. Proceedings of the IEEE, 103 (2). pp. 236-247. ISSN 0018-9219

Xu, Y. and Yu, S. and Zou, J.W. and Hu, G. and Rahman, N.A. and Othman, R. and Tao, X. and Huang, M. (2015) Identification of Peptide Inhibitors of Enveloped Viruses Using Support Vector Machine. PLoS ONE, 10 (12). ISSN 1932-6203

Y

Yaacob, M. and Zainab, A.N. and Edzan, N.N. (2002) Teknologi Maklumat dan Komunikasi (ICT) pengupaya masyarakat Melayu berasaskan pengetahuan. In: Seminar Kebangsaan Bahasa & Pemikiran Melayu: Kecemerlangan Melayu dalam Era Teknologi Maklumat dan Komunikasi, 18-19 Jun 2002, Akademi Pengajian Melayu, Universiti Malaya.

Yafouz, B. and Kadri, N.A. and Ibrahim, F. (2012) The design and simulation of a planar microarray dot electrode for a dielectrophoretic lab-on-chip device. International Journal of Electrochemical Science, 7 (12). pp. 12054-12063. ISSN 1452-3981

Yafouz, B. and Kadri, N.A. and Ibrahim, F. (2012) A numerical analysis of electric field strength over planar microarray dot electrode for dielectrophoretic lab-on-chip device. In: 2012 2nd IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2012, 2012, Langkawi.

Yahya, A.M. and Hussain, M.A. and Wahab, A.K.A. (2015) Modeling, optimization, and control of microbial electrolysis cells in a fed-batch reactor for production of renewable biohydrogen gas. International Journal of Energy Research, 39 (4). pp. 557-572. ISSN 0363-907X

Yang, S.S. and Chen, J. (2008) Design and Assessment of a Multiple Sensor Fault Tolerant Robust Control System. Journal of Control Science and Engineering (JCSE), 2008. pp. 1-10. ISSN 1687-5249

Yap, H.J. and Taha, Z. and Eng, T.H. and Chew, J.Y. (2009) Design and development of a marker-based augmented reality system using OpenCV and OpenGL. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 Dec 2009, Kitakyushu, Japan. (Submitted)

Yap, Hwa Jen and Taha, Zahari and Ng, Sock Wee and Chew, Jouh Yeong (2009) Low cost head tracking system for a desktop-based VR system using webcam. In: Asia Pacific Industrial Engineering and Management Systems Conference, 14-16 December 2009, Kitakyushu, Japan. (Submitted)

Yau, Y.H. and Hasbi, S. (2015) Field analysis of indoor air quality in high rise and low rise green offices with radiant slab cooling systems in Malaysia. Indoor and Built Environment, 24 (2). pp. 174-184. ISSN 1420-326X

Yau, Y.H. and Pean, H.L. (2011) The climate change impact on air conditioner system and reliability in Malaysia-A review. Renewable & Sustainable Energy Reviews, 15 (9). pp. 4939-4949.

Yee, P.L. and Kiah, M.L.M. (2010) Shoulder surfing resistance using penup event and neighbouring connectivity manipulation. Malaysian Journal of Computer Science, 23 (2). pp. 121-140. ISSN 0127-9084

Yeoh, K.H. and Kaur, K. (2008) Subject support in collection development: using the bibliometric tool. Collection Building, 27 (4). pp. 157-166. ISSN 0160-4953

Yeow, E. and Chiam, Y.K. (2014) Integration of safety risk assessment techniques into requirement elicitation. In: 13th International Conference on Intelligent Software Methodologies, Tools, and Techniques, 22-24 Sep 2014, Langkawi, Malaysia.

Yew, M.C. and Sulong, N.H.R. and Yew, M.K. and Amalina, M.A. and Johan, M.R. (2015) Eggshells: A novel bio-filler for intumescent flame-retardant coatings. Progress in Organic Coatings, 81. pp. 116-124. ISSN 0300-9440

Yew, M.C. and Sulong, N.H.R. and Yew, M.K. and Amalina, M.A. and Johan, M.R. (2015) Influences of flame-retardant fillers on fire protection and mechanical properties of intumescent coatings. Progress in Organic Coatings, 78. pp. 59-66. ISSN 0300-9440

Yew, M.K. and Ang, B.C. and Mahmud, H.B. and Yew, M.C. (2013) Enhancement of polypropylene twisted bundle fiber on the mechanical properties of high strength oil palm shell lightweight concrete. In: 1st International Conference on Science and Engineering of Materials, 13 - 14 November 2013, Sunway Putra Hotel, Kuala Lumpur.

Yogarajan, M.P. and Ibrahim, F. and Soin, N. (2008) Effect of electrode geometric parameters on droplet translocation in digital micro-fluidic biosensor. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, Biomed 2008, 2008, Kuala Lumpur.

Yong, Y.L. and Tan, L.K. and McLaughlin, R.A. and Chee, K.H. and Liew, Y.M. (2017) Linear-regression convolutional neural network for fully automated coronary lumen segmentation in intravascular optical coherence tomography. Journal of Biomedical Optics (JBO), 22 (12). p. 1.

Yousefi, A.T. and Bagheri, S. and Kadri, N.A. (2015) Integration of biosensors based on microfluidic: A review. Sensor Review, 35 (2). pp. 190-199. ISSN 0260-2288

Yousefi, A.T. and Bagheri, S. and Kadri, N.A. and Elfghi, F.M. and Mahmood, M.R. and Ikeda, S. (2015) Synthesis of well-crystalline lattice carbon nanotubes via neutralized cooling method. Materials and Manufacturing Processes, 30 (1). pp. 59-62. ISSN 1042-6914

Yousefi, A.T. and Bagheri, S. and Kadri, N.A. and Mahmood, M.R. and Ikeda, S. (2015) Constant glucose biosensor based on vertically aligned carbon nanotube composites. International Journal of Electrochemical Science, 10 (5). pp. 4183-4192. ISSN 1452-3981

Yousoof, M. and Sapiyan, M. and Kamaluddin, K. (2007) Measuring cognitive load-a solution to ease learning of programming. In: World Academy of Science, Engineering and Technology.

Yousoof, M. and Sapiyan, M. and Kamaluddin, K. (2006) A Proposed Framework for Visualization to Teach Computer Science. Proceedings of World Academy of Science, Engineering and Technology, 12. pp. 266-269. ISSN 1307-6884

Yun, S.C. and Parasuraman, S. and Ganapathy, V. (2011) Dynamic path planning algorithm in mobile robot navigation. In: 2011 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2011, 25-28 Sep 2011, Langkawi.

Yunus Khan, T.M. and Atabani, A.E. and Badruddin, I.A. and Ankalgi, R.F. and Khan, T.K.M. and Badarudin, A. (2015) Ceiba pentandra, Nigella sativa and their blend as prospective feedstocks for biodiesel. Industrial Crops and Products, 65. pp. 367-373. ISSN 0926-6690

Yunus Khan, T.M. and Badruddin, I.A. and Badarudin, A. and Banapurmath, N.R. and Salman Ahmed, N.J. and Quadir, G.A. and Al-Rashed, A.A.A.A. and Khaleed, H.M.T. and Kamangar, S. (2015) Effects of engine variables and heat transfer on the performance of biodiesel fueled IC engines. Renewable and Sustainable Energy Reviews, 44. pp. 682-691. ISSN 1364-0321

Yuso, R.J.R. and Zainuddin, R. and Baba, M.S. and Jomhari, N. and Yusoff, Z.M. (2012) Visualizing Quranic Words With Parallel Plot. Malaysian Journal of Computer Science, 25 (2). pp. 90-106. ISSN 0127-9084

Yusof, R.J.R. and Zainuddin, R. and Baba, M.S. and Yusoff, Z.M. (2010) Qur'anic words stemming. Arabian Journal for Science and Engineering, 35 (2 C). pp. 37-49.

Yusof, R.J.R. and Zainuddin, R. and Baba, M.S. and Yusoff, Z.M. (2009) T-Test for visualizing frequently used Arabic words. Journal of Applied Sciences, 9 (5). pp. 988-992. ISSN 1812-5654

Yusof, R.J.R. and Zainuddin, R. and Baba, M.S. and Yusoff, Z.M. (2009) Visualization systems supporting the reading of arabic document for non arabic speakers. Information Technology Journal, 8 (1). pp. 16-27. ISSN 1812-5638

Yusoff, N.A. and Soin, N. and Ibrahim, F. (2009) Lab-on-a-disk as a potential microfluidic platform for dengue NS1-ELISA. In: 2009 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2009, 2009, Kuala Lumpur.

Yusoff, N.M. and Salim, S.S. (2012) Investigating cognitive task difficulties and expert skills in e-Learning storyboards using a cognitive task analysis technique. Computers & Education, 58 (1). pp. 652-665. ISSN 0360-1315

Yusoff, S. and Syafiq Rosli, A. (2015) The implication of feed-in tariff funding structureand the sustainability of renewable energy in Malaysia. In: 9th International Conference on Researches in Engineering Technology and Sciences (ICRETS), 17-18 September 2015, London Imperial College, United Kingdom.

Yusop, F.D. (2013) Curriculum and design analysis of a mathematics-based educational television program: a case study of Cyberchase animated television series. Malaysian Online Journal of Educational Technology, 2 (1).

Yusop, F.D. (2013) The benefits and challenges of implementing service-learning in an advanced instructional design and technology curricula: implications for teaching professional courses. The New Educational Review.

Yusop, F.D. and Baharin, Y. (2011) Pembelajaran kolaboratif menggunakan blog dalam pembelajaran mata pelajaran ekonomi asas. Jurnal Pendidikan, 31. (Unpublished)

Yusop, F.D. and Chin, Y.L. (2011) Potential use of social networking tool to assist reading comprehension: implications for practice and future research. Jurnal Pendidikan, 31 (1).

Yusop, F.D. and Correia, A-P. (2013) On becoming a civic-minded instructional designer: an ethnographic study of an instructional design experience. British Journal of Educational Technology. ISSN 0007-1013

Yusuf, K. and Nukman, Y. and Yusof, T.M. and Dawal, S.Z. and Yang, H.Q. and Mahlia, T.M.I. and Tamrin, K.F. (2010) Effect of cutting parameters on the surface roughness of titanium alloys using end milling process. Scientific Research and Essays, 5 (11). pp. 1284-1293.

Z

Za'balawi, I.I. and Kiong, L.C. and Kiong, W.E. and Senanayake, S.M.N.A. (2009) Global entrainment effect on biped robot locomotion energy. International Journal of Robotics and Automation, 24 (6). ISSN 0826-8185

Zadry, H.R. and Dawal, S.Z.M. and Taha, Z. (2016) Development of statistical models for predicting muscle and mental activities during repetitive precision tasks. International Journal of Occupational Safety and Ergonomics, 22 (3). pp. 374-383. ISSN 1080-3548

Zaharinie, T. and Huda, Z. and Izuan, M.F. and Hamdi, M. (2015) Development of optimum process parameters and a study of the effects of surface roughness on brazing of copper. Applied Surface Science, 331. pp. 127-131. ISSN 0169-4332

Zahidah, Z. and Noorhidawati, A. and Zainab, A.N. (2011) Exploring the needs of Malay manuscript studies community for an e-learning platform. Malaysian Journal of Library & Information Science, 16 (3). pp. 31-47. ISSN 1394-6234

Zaidan, A.A. and Zaidan, B.B. and Alanazi, Owaid Hamdan and Gani, Abdullah and Zakaria, Omar and Alam, Gazi Mahabubul (2010) Novel approach for high (secure and rate) data hidden within triplex space for executable file. Scientific Research and Essays, 5 (15). pp. 1965-1977. ISSN 1992-2248

Zaidan, B.B. and Zaidan, A.A. and Mat Kiah, M.L. (2011) Impact of data privacy and confidentiality on developing telemedicine applications: a review participates opinion and expert concerns. International Journal of Pharmacology, 7 (3). pp. 382-387. ISSN 1811-7775

Zaidan, B.B. and Zaidan, A.A. and Taqa, A. and Alam, G.M. and Kiah, M.L.M. and Jalab, A.H. (2010) StegoMos: a secure novel approach of high rate data hidden using mosaic image and ANN-BMP cryptosystem. International Journal of Physical Sciences, 5 (11). pp. 1796-1806. ISSN 1992-1950

Zailani, S. and Govindan, K. and Iranmanesh, M. and Shaharudin, M.R. and Chong, Y.S. (2015) Green innovation adoption in automotive supply chain: the Malaysian case. Journal of Cleaner Production, 108 (A). pp. 1115-1122. ISSN 0959-6526

Zainab, A.N. (2000) Publication productivity, focus on institutional, collaborative and communicational correlates: A review of literature. Malaysian Journal of Library & Information Science, 5 (1). pp. 53-94.

Zainab, A.N. and Abrizah, A. and Edzan, N.N. (2002) An information and communication technology (ICT) enabled knowledge-based Malay society. Malaysian Journal of Library & Information Science, 7 (1). pp. 1-15. ISSN 1394-6234

Zainab, A.N. and Nor Eliza, M.Z. (1996) Introducing MAKLUM - the general reference expert adviser developed for a university library. Malaysian Journal of Library & Information Science, 1 (1). pp. 93-107.

Zainah, I. and Ahmad Fahmy, K. and Adiza, J. and Azmi, I. and Mohd Effendi, D. and Aziman, M. (2014) Ambient vibration testing of damaged RC building structure. In: International Conference on Innovative Trends in Multidisciplinary Academic Research, 20-21 October 2014, Istanbul, Turkey.

Zainal Abidin, M.I.I. and Abdul Raman, A.A. and Mohamad Nor, M.I. (2013) Review on measurement techniques for drop size distribution in a stirred vessel. Industrial & Engineering Chemistry Research. pp. 16085-16094.

Zainol, R. and Maidin, S.L. (2011) The use of GIS application in identifying youth recreational area in Subang Jaya, Selangor. In: International Conference on Urban Planning, Regional Development and Information Society, 18-20 May 2011, Essen, Germany.

Zainol, R. and Yacob, S.P. (2014) Embedding web-based geographic information system (web-based gis) in teaching and learning of history. In: 6th International Conference on Education and New Learning Technologies, 07-09 July 2014, Barcelona, Spain.

Zairul Nisham, M. and Abdul Ghani, S. and Wan Nor Azriyati, W.A. and Hanif, N.R. and Al-Sadat, Z. and Tedong, P.A. (2015) Issues in managing vertical residential building in Malaysia: Homeowners perspective. In: Asia Pacific Network for Housing Research Conference (APNHR)., 09 - 12 April 2015, Gwangju, South Korea..

Zanaria, S.U. and Mohd Faizal, H. (2011) UM Research Repository : guideline for depositor. [Teaching Resource] (Unpublished)

Zaqout, I. and Zainuddin, R. and Baba, S. (2005) Pixel-based skin color detection technique. Machine Graphics and Vision, 14 (1). p. 61. ISSN 1230-0535

Zaqout, I. and Zainuddin, R. and Baba, S. (2004) A feature-based approach for segmenting faces. Machine Graphics & Vision International Journal, 13 (3). pp. 249-259.

Zaqout, I. and Zainuddin, R. and Sapian, B. (2004) Human Face Detection In Color Images. Advances in Complex Systems, 7 (3). pp. 369-383.

Zare, M.R. and Ainon, R.N. and Seng, W.C. (2009) Content-based image retrieval for blood cells. In: 2009 Third Asia International Conference on Modelling & Simulation, 26-29 May 2009, Bali, Indonesia.

Zarei, A. and Tiu, Zian Cheak and Ahmad, F. and Ahmad, Harith and Harun, Sulaiman Wadi (2015) Q-switched brillouin fibre laser with multi-wall carbon nanotube saturable absorber. IET Optoelectronics, 9 (2). pp. 96-100. ISSN 1751-8776

Zarinah, M.K. and Siti, S.S. and Perumal, R.M. and Hossain, M.D. and Masud, M.M. and Krishna, L.S.R. and Janardhan, G.R. and Rao, C.S.P. and Sivanandam, S.N. and Pandian, A.P. (2009) A Web-based requirements elicitation tool using focus group discussion in supporting computer-supported collaborative learning requirements development. International Journal of the Computer, the Internet and Management, 41. pp. 1-8.

Zarinah, M.K. and Siti, S.S. and Perumal, R.M. and Hossain, M.D. and Masud, M.M. and Krishna, L.S.R. and Janardhan, G.R. and Rao, C.S.P. and Sivanandam, S.N. and Pandian, A.P. (2009) A web-based requirements elicitation tool using focus group discussion in supporting computer-supported collaborative learning requirements development. International Journal of the Computer, 17 (2).

Zavareh, M.A. and Sarhan, A.A.D. and Bushroa, A.R. and Basirun, W.J. (2015) The tribological and electrochemical behavior of HVOF-sprayed Cr3C2–NiCr ceramic coating on carbon steel. Ceramics International, 41 (4). pp. 5387-5396. ISSN 0272-8842

Zavvari, A. and Islam, M.T. and Anwar, R. and Abidin, Z.Z. and Asillam, M.F. and Monstein, C. (2016) Analysis of radio astronomy bands using CALLISTO spectrometer at Malaysia-UKM station. Experimental Astronomy, 41 (1-2). pp. 185-195. ISSN 0922-6435

Zeimaran, E. and Pourshahrestani, S. and Pingguan-Murphy, B. and Kadri, N.A. and Rothan, H.A. and Yusof, R. and Towler, M.R. and Djordjevic, I. (2015) Fabrication and characterization of poly(octanediol citrate)/gallium-containing bioglass microcomposite scaffolds. Journal of Materials Science, 50 (5). pp. 2189-2201. ISSN 0022-2461

Zhong, X. and Mohammadi, A. and Premkumar, A.B. and Asif, A. (2015) A distributed particle filtering approach for multiple acoustic source tracking using an acoustic vector sensor network. Signal Processing, 108. pp. 589-603. ISSN 0165-1684

Zhou, J. and Abdullah, N.A. and Shi, Z. (2011) A hybrid P2P approach to service discovery in the cloud. International Journal of information Technology and Computer Science, 3 (1). pp. 1-9. ISSN 2074-9015

Zolhavarieh, S. and Aghabozorgi, S. and Wah, T.Y. (2014) Online pattern recognition in subsequence time series clustering. In: Proceedings of the 3rd International Conference on Computer Engineering & Mathematical Sciences (ICCEMS 2014), 04-05 Dec 2014, Langkawi, Malaysia.

Zolkafli, U.K. and Hanid, M. and Zakaria, N. (2009) Assesing The Performance of Construction Workers in Peninsula Malaysia. In: International Engineering Education Conference, 16-19 May 2009, Madinah, Saudi Arabia. (Submitted)

Zubir, M.N.M. and Badarudin, A. and Kazi, S.N. and Misran, M. and Amiri, A. and Sadri, R. and Khalid, S. (2015) Experimental investigation on the use of highly charged nanoparticles to improve the stability of weakly charged colloidal system. Journal of Colloid and Interface Science, 454. pp. 245-255. ISSN 0021-9797

Zyed, Z.A.S. and Abd Aziz, W.N.A.W. and Hanif, N.R. and Tedong, P.A. (2014) Affordable housing schemes: Overcoming homeownership problems. Open House International, 39 (4). pp. 5-13.

This list was generated on Tue Dec 11 16:12:37 2018 +08.