Strengthening of RC beams using prestressed fiber reinforced polymers - A review

Aslam, M. and Shafigh, P. and Jumaat, Mohd Zamin and Shah, S.N.R. (2015) Strengthening of RC beams using prestressed fiber reinforced polymers - A review. Construction and Building Materials, 82. pp. 235-256. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.02.051.

[img] PDF (Strengthening of RC beams using prestressed fiber reinforced polymers - A review)
Strengthening_of_RC_beams_using_prestressed_fiber_reinforced_polymers.pdf - Published Version
Restricted to Repository staff only

Download (1MB) | Request a copy
Official URL: https://doi.org/10.1016/j.conbuildmat.2015.02.051

Abstract

The use of steel and fiber reinforced polymers (FRPs) for strengthening RC beams can significantly improve the flexural strength, fatigue life and the serviceability of the beams compared to un-strengthened beams. Prestressing materials enable the material to become more efficient since a greater portion of its tensile capacity is employed. Investigations have shown that prestressed FRPs are effective materials for strengthening deteriorated structures. This paper presents a comprehensive review on the flexural behavior of strengthened RC beams using prestressed FRPs. The review covers the near surface mounted (NSM), externally bonded reinforcement (EBR) and externally post-tensioned techniques (EPT) and the corresponding advantages and disadvantages are highlighted. Anchorage systems and the effect of pre-stressing levels on the ductility, deformability and bond behavior of prestressed FRPs are also addressed. Recommendations for the future research are also presented. (C) 2015 Elsevier Ltd. All rights reserved.

Item Type: Article
Funders: University of Malaya - Malaysia UM.C/625/1/HIR/MOHE/ENG/36 (16001-00-D000036)
Additional Information: ISI Document Delivery No.: CG2FL Times Cited: 0 Cited Reference Count: 101 Cited References: 215-ACI, 1996, PRESTR CONCR STRUCT Abdelrahman AA, 1997, ACI STRUCT J, V94 Ali MSM, 2010, INT C SUST BUILT ENV Al-Mayah A, 2005, P ACI SPEC PUBL SP 2, P209 Anonymous, 2002, CSAS806 Aram MR, 2008, J COMPOS CONSTR, V12, P25, DOI 10.1061/(ASCE)1090-0268(2008)12:1(25) Badawi M, 2011, CONSTR BUILD MATER, V25, P1474, DOI 10.1016/j.conbuildmat.2010.08.001 Badawi M, 2009, CONSTR BUILD MATER, V23, P3292, DOI 10.1016/j.conbuildmat.2009.03.005 Badawi M, 2009, J COMPOS CONSTR, V13, P415, DOI 10.1061/(ASCE)1090-0268(2009)13:5(415) Badawi M, 2006, P 3 INT C FRP COMP C Badawi MA, 2007, THESIS U WATERLOO Bakis CE, 2002, REPORTED BY ACI COMM, V440 Benmokrane B, 2000, CONSTR BUILD MATER, V14, P157, DOI 10.1016/S0950-0618(00)00017-9 Busel J, 2000, PRODUCT SELECTION GU, P122 Canada ISIS, 2007, PRESTR CONCR STRUCT Chen SM, 2009, J CONSTR STEEL RES, V65, P1480, DOI 10.1016/j.jcsr.2009.03.005 Choi HT, 2010, J COMPOS CONSTR, V15, P93 Costa IG, 2010, FLEXURAL STRENGTHENI De Lorenzis L, 2002, ACI STRUCT J, V99, P123 De-Lorenzis L, 2000, P 3 INT C ADV COMP M De Lorenzis L, 2007, COMPOS PART B-ENG, V38, P119, DOI 10.1016/j.compositesb.2006.08.003 Deng ZC, 2011, ADV FRP COMPOSITES C, P699 Echeverria M, 2013, COMPOS PART B-ENG, V54, P112, DOI 10.1016/j.compositesb.2013.05.008 El Aziz AFM, 2006, THESIS U WINDSOR El-Hacha R, 2008, 4 INT C FRP COMP CIV El-Hacha R, 2011, PCI J, P134 El-Hacha R, 2003, ACI STRUCT J, V100, P305 El-Hacha R, 2004, ACI STRUCT J, V101, P717 El-Hacha R, 2013, CAN J CIVIL ENG, V40, P1127, DOI 10.1139/cjce-2013-0063 El-Hacha R, 2001, PROGR STRUCTURAL ENG, V3, P111, DOI 10.1002/pse.76 Elrefai A, 2008, CAN J CIVIL ENG, V35, P1294, DOI 10.1139/L08-070 Elrefai A, 2012, CONSTR BUILD MATER, V29, P246, DOI 10.1016/j.conbuildmat.2011.10.014 El-Refai AM, 2007, THESIS U WATERLOO Emmons PH, 2001, CONCRETE REPAIR MAIN Fathelbab FA, 2011, CONCR RES LETT, V2, P228 Figeys W, 2011, MATER STRUCT, V44, P1655, DOI 10.1617/s11527-011-9725-x Gaafar MA, 2008, MAST ABSTR INT, V48 Gaafar MA, 2007, THESIS U CALGARY CAL, P205 GangaRao HVS, 2010, CHL2 W VIRG U Garden HN, 1998, COMPOS PART B-ENG, V29, P411, DOI 10.1016/S1359-8368(97)00043-7 Grace NF, 1998, PCI J, V43, P88 Hajihashemi A, 2011, J COMPOS CONSTR, V15, P887, DOI 10.1061/(ASCE)CC.1943-5614.0000225 Harajli M, 1999, J STRUCT ENG-ASCE, V125, P1151, DOI 10.1061/(ASCE)0733-9445(1999)125:10(1151) Hassan T, 2002, PCI J, V47, P76 Hassan T, 2002, P 1 INT C STRUCT HLT Jumaat MZ, 2011, INT J PHYS SCI, V6, P3567 Kadhim MMA, 2011, EFFECT PRESTRESSED C Kim YJ, 2008, J COMPOS CONSTR, V12, P35, DOI 10.1061/(ASCE)1090-0268(2008)12:1(35) Kim YJ, 2008, J COMPOS CONSTR, V12, P274, DOI 10.1061/(ASCE)1090-0268(2008)12:3(274) Kim YJ, 2008, J COMPOS CONSTR, V12, P246, DOI 10.1061/(ASCE)1090-0268(2008)12:3(246) Klaiber FW, 1998, CONSTR BUILD MATER, V12, P151, DOI 10.1016/S0950-0618(97)00017-2 Klaiber FW, 1987, METHODS STRENGTHENIN Kobraei M, 2011, SCI RES ESSAYS, V6, P3447 Kurihashi Y, 2011, ADV FRP COMPOSITES C, P695 Matta F, 2009, CONSTR BUILD MATER, V23, P1628, DOI 10.1016/j.conbuildmat.2007.08.002 Matupayont S, 1994, P JAPAN CONCRETE I, V16, P1033 Meier U, 1995, CONSTR BUILD MATER, V9, P341, DOI 10.1016/0950-0618(95)00071-2 Meier U, 1991, ADV COMPOSITE MAT CI, P224 Motavalli M, 2007, INT C COMP POL Mukherjee A, 2009, CONSTR BUILD MATER, V23, P822, DOI 10.1016/j.conbuildmat.2008.03.008 Neto P, 2009, INT J FRACTURE, V157, P159, DOI 10.1007/s10704-008-9292-5 Nordin H, 2006, J COMPOS CONSTR, V10, P60, DOI 10.1061/(ASCE)1090-0268(2006)10:1(60) Nordin H., 2003, THESIS LULEA U TECHN Nordin H, 2001, P INT C FRP COMP CIV, P1067 Nordin H, 2002, ICCI SAN FRANC Nordin H, 2005, 200506 LUL U TECHN, P37 Omran HY, 2012, CONSTR BUILD MATER, V31, P74, DOI 10.1016/j.conbuildmat.2011.12.054 Oudah F, 2013, ENG STRUCT, V46, P173, DOI 10.1016/j.engstruct.2012.07.020 Oudah F, 2011, THESIS U CALGARY Oudah F, 2012, COMPOS STRUCT, V94, P1333, DOI 10.1016/j.compstruct.2011.11.025 Pellegrino C, 2010, THESIS U POLITECNICA PICARD A, 1995, J STRUCT ENG-ASCE, V121, P1832, DOI 10.1061/(ASCE)0733-9445(1995)121:12(1832) Quantrill RJ, 1998, COMPOS SCI TECHNOL, V58, P1259, DOI 10.1016/S0266-3538(98)00002-5 Rai G., 2013, PRESTRESSING TECHNIQ, P200 Recupero A, 2014, ADV CIV ENG, P10 S & P Clever Reinforcement Company, FRP STRENGTH SYST Schmidt JW, 2012, CONSTR BUILD MATER, V32, P110, DOI 10.1016/j.conbuildmat.2011.11.049 Seim W, 2001, J COMPOS CONSTR, V5, P67, DOI 10.1061/(ASCE)1090-0268(2001)5:2(67) Shang S, 2005, P INT S BOND BEH FRP, P321 Siwowski T, 2012, C CIV ENG BAS POL CO Stoll F, 2000, COMPOS STRUCT, V49, P191, DOI 10.1016/S0263-8223(99)00134-8 Strong AB, 2008, FUNDAMENTALS COMPOSI, V2nd, P620 Taha MMR, 2003, ACI STRUCT J, V100, P96 Taljsten B, 2002, FRP STRENGTHENING EX Tan KH, 2003, ACI STRUCT J, V100, P565 Tan KH, 1997, ACI STRUCT J, V94, P13 TRIANTAFILLOU TC, 1992, ACI STRUCT J, V89, P235 TRIANTAFILLOU TC, 1991, J ENG MECH-ASCE, V117, P1652, DOI 10.1061/(ASCE)0733-9399(1991)117:7(1652) Wahab N, 2010, J COMPOS CONSTR, V15, P85 Wang WW, 2011, J COMPOS CONSTR, V16, P207 Weichen X, 2008, PCI J Wight R, 1995, RILEM P, P568 Woo SK, 2013, KSCE J CIV ENG, V17, P179, DOI 10.1007/s12205-013-1592-2 Woo SK, 2008, ENG STRUCT, V30, P3751, DOI 10.1016/j.engstruct.2008.06.013 Xue WC, 2010, COMPOS STRUCT, V92, P612, DOI 10.1016/j.compstruct.2009.09.036 Yadollahi Omran H, 2013, THESIS U CALGARY Yang DS, 2009, COMPOS STRUCT, V88, P497, DOI 10.1016/j.compstruct.2008.05.016 You YC, 2012, COMPOS PART B-ENG, V43, P3026, DOI 10.1016/j.compositesb.2012.05.030 Yu P, FLEXURAL PERFORMANCE Yu PY, 2008, ACI STRUCT J, V105, P11 Yu-Lin H, 2005, J ZHEJIANG UNIV-SC A, V6, P166 Aslam, Muhammad Shafigh, Payam Jumaat, Mohd Zamin Shah, S. N. R. Engineering, Faculty /I-7935-2015 Engineering, Faculty /0000-0002-4848-7052 University of Malaya - Malaysia UM.C/625/1/HIR/MOHE/ENG/36 (16001-00-D000036) The authors are grateful for the financial support towards this research by the University of Malaya - Malaysia, High Impact Research Grant (HIRG) No. UM.C/625/1/HIR/MOHE/ENG/36 (16001-00-D000036) - "Strengthening Structural Elements for Load and Fatigue". 0 ELSEVIER SCI LTD OXFORD CONSTR BUILD MATER
Uncontrolled Keywords: Strengthening, composite, rc beam, flexure, anchorage, fiber reinforced polymer, prestressing, near surface mounted, surface-mounted cfrp, concrete beams, flexural behavior, frp reinforcement, external tendons, composite plates, fatigue behavior, sheets, rods, system,
Subjects: T Technology > T Technology (General)
T Technology > TA Engineering (General). Civil engineering (General)
Divisions: Faculty of Engineering
Depositing User: Mr Jenal S
Date Deposited: 17 Mar 2016 01:25
Last Modified: 05 Feb 2020 04:47
URI: http://eprints.um.edu.my/id/eprint/15714

Actions (login required)

View Item View Item