Guided routing on spinning microfluidic platforms

Kazemzadeh, A. and Ganesan, P. and Ibrahim, F. and Kulinsky, L. and Madou, M.J. (2015) Guided routing on spinning microfluidic platforms. RSC Advances, 5 (12). pp. 8669-8679. ISSN 2046-2069, DOI https://doi.org/10.1039/C4a14397c.

[img]
Preview
PDF (Guided routing on spinning microfluidic platforms)
Guided_routing_on_spinning_microfluidic_platforms.pdf - Other

Download (3MB)
Official URL: http://pubs.rsc.org/en/content/articlehtml/2014/ra...

Abstract

Flow directionality, valving and liquid routing in centrifugal microfluidics (Lab-on-CD) are typically controlled by applying centrifugal and Coriolis forces and have been the subject of active research interest in recent years. Determining and switching the flow direction at a T-junction is a common fluidic operation important for implementing several chemical and clinical assays for Lab-on-CDs. The present work describes a novel approach to route samples and control flow direction on a spinning disc that employs a guiding microstructure that relies on a two-stage valve comprised of an auxiliary inlet, which is a recess embedded at a T-junction, and a bent auxiliary outlet. The distinctive feature that makes this approach different from other types of passive capillary valves is the strong control of liquid movement, which is achieved by employing two adjustable sequential burst valves called a primary valve and a secondary burst valve. The guiding method can be used to route samples and reagents at given flow rates to a selection of receiving reservoirs, which are determined by the spinning frequency of the disc. The technique also allows for the switching of the flow direction instantaneously from the direction along the disc rotation to the opposite direction by increasing the rotational speed of the disc rather than relying on the Coriolis force, which would require reversing the spin direction. The flow routing by the proposed technique has been studied theoretically, and the flow behavior has been numerically investigated. These studies have been experimentally validated for a wide range of capillary sizes and for various liquids including di-water, mixtures of water and ethanol and bovine serum albumin (BSA).

Item Type: Article
Funders: This research was supported by the University of Malaya (UM) High Impact Research Grant UM-MOHE UM.C/625/1/HIR/ MOHE/05 from the Ministry of Higher Education Malaysia (MOHE) and University of Malaya Research Grant (UMRG RP009A-13AET). The authors would li
Additional Information: Ay7dk Times Cited:0 Cited References Count:59
Uncontrolled Keywords: Flow, valves, disc, microchannel, separation, system, integration, biochips, devices, design,
Subjects: T Technology > T Technology (General)
T Technology > TA Engineering (General). Civil engineering (General)
T Technology > TJ Mechanical engineering and machinery
Divisions: Faculty of Engineering
Depositing User: Mr Jenal S
Date Deposited: 23 Jul 2015 00:45
Last Modified: 01 Nov 2017 06:03
URI: http://eprints.um.edu.my/id/eprint/13765

Actions (login required)

View Item View Item