 | Up a level |
Ali, A.H. and Shuhaimi, A. and Hassan, Z. and Yusoff, Y. (2013) Compositional and structural characterization of Heterostructure InGaN-based light-emitting diode by high resolution x-ray diffraction. Advanced Materials Research, 620. pp. 22-27. DOI https://doi.org/10.4028/www.scientific.net/AMR.620.22.
Ali, Md. Eaqub and Das, Rasel and Ma'amor, Azman and Hamid, Sharifah Bee Abd (2013) Multifunctional Carbon Nanotubes (CNTs): A New Dimension in Environmental Remediation. Advanced Materials Research, 832. pp. 328-332. ISSN 1022-6680, DOI https://doi.org/10.4028/www.scientific.net/AMR.832.328.
Ali, Md. Eaqub and Ullah, Mahbub and Ma'amor, Azman and Hamid, Sharifah Bee Abd (2013) Surfactant Assisted Ball Milling: A Simple Top down Approach for the Synthesis of Controlled Structure Nanoparticle. Advanced Materials Research, 832. pp. 356-361. ISSN 1022-6680, DOI https://doi.org/10.4028/www.scientific.net/AMR.832.356.
Amiriyan, M. and Chew, W.J. and Ramesh, S. and Tolouei, R. and Hassan, M.A. and Hossain, A. and Sopyan, I. and Meenaloshini, S. (2012) Mechanical and electrical properties of Y-TZP/ZrB2 composite. Advanced Materials Research, 576. pp. 228-231.
Annuar, N.Z.M. and Sabri, M.F.M. and Bakar, A.S.A. (2013) Investigation of the geometry modeling of metal organic halide vapor phase epitaxy (MOHVPE) reactor. Advanced Materials Research, 626. pp. 396-400. DOI https://doi.org/10.4028/www.scientific.net/AMR.626.396.
Azimah, E. and Zainal, N. and Hassan, Z. and Shuhaimi, A. and Bahrin, A. (2013) Electrical and optical characterization of Mg doping in GaN. Advanced Materials Research, 620. pp. 453-457. DOI https://doi.org/10.4028/www.scientific.net/AMR.620.453.
Bushroa, A.R. and Ying, C.C. (2008) Plasma Non-Transferred Arc Cladding of Alumina Powder on Mild Steel-Parameters Optimization Using Taguchi Method. Advanced Materials Research, 47-50. pp. 1003-1006. ISSN 1022-6680, DOI https://doi.org/10.4028/www.scientific.net/AMR.47-50.1003.
Dahari, M. and Liu, Y. (2012) A review of auto-guided-vehicles routing algorithms. Advanced Materials Research, 479. pp. 443-456.
Hassan, Mohamed Mohsen Abdel-Naeim and Hamdi, M. and Naderi, S. and Zahedi, F. (2012) Effect of curvature and thickness of aluminum shells on the energy absorption in low velocity impact. Advanced Materials Research, 488. pp. 40-45. ISSN 3037853824,
Lee, K.Y. and Chin, K.M. and Ramesh, S. and Tan, C.Y. and Teng, W.D. and Sopyan, I. (2012) Characterization of forsterite bioceramics. Advanced Materials Research, 576. pp. 195-198.
Lee, K.Y. and Chin, K.M. and Ramesh, Singh and Tan, C.Y. and Hassan, M.A. and Purbolaksono, J. and Teng, W.D. and Sopyan, I. (2012) Effect of ultrasonication on synthesis of forsterite ceramics. Advanced Materials Research, 576. pp. 252-255. ISSN 1022-6680, DOI https://doi.org/10.4028/www.scientific.net/AMR.576.252.
Mahdi, E.M. and Abd Shukor, Mohd Hamdi and Yusoff, M. and Wilfred, P. (2013) XRD and EDXRF analysis of anatase Nano-TiO2 synthesized from mineral Precursors. Advanced Materials Research, 620. pp. 179-185. ISSN 3037855606,
Mahmoudy Khatir, N. and Banihashemian, S.M. and Periasamy, V. and Abd Majid, Wan Haliza and Abdul Rahman, S. (2012) Current-Voltage Characterization on Au-DNA-Au Junctions under the Influence of Magnetic Field. Advanced Materials Research, 535. pp. 1350-1353. ISSN 3037854464, DOI https://doi.org/10.4028/www.scientific.net/AMR.535-537.1350.
Mohammadjafari, M. and Ahmed, Shamsuddin and Md Dawal, Siti Zawiah and Zayandehroodi, H. (2012) The role of project manager in smes for developing new product by e-collaboration. Advanced Materials Research, 433. pp. 1637-1645. ISSN 3037853190,
Narmashiri, K. and Jumaat, Mohd Zamin and Ramli Sulong, Nor Hafizah (2011) Local stiffening of steel I-beams by using CFRP materials. Advanced Materials Research, 163. pp. 3838-3843. ISSN 0878492062, DOI https://doi.org/10.4028/www.scientific.net/AMR.163-167.3838.
Prihandana, Gunawan Setia and Sriani, Tutik and Prihandana, Kei and Prihandana, Yuta and Mahardika, Muslim and Abd Shukor, Mohd Hamdi and Mitsui, Kimiyuki (2011) Study on the effect of nano and micro MoS2 powder in micro-electrical discharge machining. Advanced Materials Research, 264. pp. 1450-1455. ISSN 3037850531,
Sayuti, Mohd and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2011) Optimizing the machining parameters in glass grinding operation on the CNC milling machine for best surface roughness. Advanced Materials Research, 154-15. pp. 721-726. ISSN 1022-6680, DOI https://doi.org/10.4028/www.scientific.net/AMR.154-155.721.
Sopyan, I. and Fadli, A. and Ramesh, S. (2013) Protein foaming-consolidation method for fabrication of high performance porous bioceramics. Advanced Materials Research, 622. pp. 1759-1763.
