 | Up a level |
Abd Rahman, Farah Hannani and Amiruddin, Hilmi and Abdollah, Mohd Fadzli and Zulkifli, Nurin Wahidah Mohd and Samion, Syahrullail and Umehara, Nortisugu and Tanemura, Masaki and Honda, Mitsuhiro and Morina, Ardian (2024) Synthesising graphene with renewably-sourced bio-carbon precursors: a brief review. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46 (3). p. 173. ISSN 1678-5878, DOI https://doi.org/10.1007/s40430-024-04743-y.
AbdRabbuh, O. Almatar and Kazi, S.N. and Zubir, Mohd Nashrul Mohd and Chowdhury, Zaira Zaman and Abdelrazek, Ali H. (2024) Heat transfer inside annular passages: A comparison of noncircular and fully circular passages using eco-friendly graphene nanofluid. Case Studies in Thermal Engineering, 60. p. 104659. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2024.104659.
Abdelrazek, Ali H. and Alawi, Omer A. and Mat Ali, Mohamed Sukri and Zaki, Sheikh Ahmad and Ahmed, Khaled I. and Kazi, S. N. (2024) Thermal performance assessment of alumina/graphene oxide hybrid nanofluid in annular passage of multiple configurations. Journal of Thermal Analysis and Calorimetry, 149 (5). pp. 2463-2479. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-023-12821-x.
Ahmadipour, Mohsen and Bhattacharya, Anish and Sarafbidabad, Mohsen and Sazali, Ezza Syuhada and Ghoshal, Sib Krishna and Satgunam, Meenaloshini and Singh, Ramesh and Ardani, Mohammad Rezaei and Missaoui, Nadhem and Kahri, Hamza and Pal, Ujjwal and Pang, Ai Ling (2024) CA19-9 and CEA biosensors in pancreatic cancer. Clinica Chimica Acta, 554. p. 117788. ISSN 0009-8981, DOI https://doi.org/10.1016/j.cca.2024.117788.
Ahmadipour, Mohsen and Bhattacharya, Anish and Sarafbidabad, Mohsen and Syuhada Sazali, Ezza and Krishna Ghoshal, Sib and Satgunam, Meenaloshini and Singh, Ramesh and Rezaei Ardani, Mohammad and Missaoui, Nadhem and Kahri, Hamza and Pal, Ujjwal and Ling Pang, Ai (2024) CA19-9 and CEA biosensors in pancreatic cancer. Clinica Chimica Acta, 554. ISSN 0009-8981, DOI https://doi.org/10.1016/j.cca.2024.117788.
Alfellag, Mohanad A. and Kamar, Haslinda Mohamed and Abidin, Ummikalsom and Kazi, Salim Newaz and Alawi, Omer A. and Muhsan, Ali S. and Sidik, Nor Azwadi Che and Shaikh, Kaleemullah and Khan, Wajahat Ahmed (2024) Green synthesized clove-treated carbon nanotubes/titanium dioxide hybrid nanofluids for enhancing flat-plate solar collector performance. Applied Thermal Engineering, 246. p. 122982. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2024.122982.
Alfellag, Mohanad A. and Kamar, Haslinda Mohamed and Abidin, Ummikalsom and Kazi, Salim Newaz and Sidik, Nor Azwadi Che and Muhsan, Ali S. and Alawi, Omer A. (2024) Optimizing mixing ratio of multi-walled carbon nanotubes and titanium dioxide: A green approach to high-performance hybrid nanofluids for heat transfer. Powder Technology, 436. ISSN 0032-5910, DOI https://doi.org/10.1016/j.powtec.2024.119509.
Alfellag, Mohanad A. and Kamar, Haslinda Mohamed and Abidin, Ummikalsom and Kazi, Salim Newaz and Sidik, Nor Azwadi Che and Muhsan, Ali S. and Alawi, Omer A. (2024) Optimizing mixing ratio of multi-walled carbon nanotubes and titanium dioxide: A green approach to high-performance hybrid nanofluids for heat transfer. Powder Technology, 436. p. 119509. ISSN 0032-5910, DOI https://doi.org/10.1016/j.powtec.2024.119509.
Ananzeh, Hammam M. and Ramli, Rahizar and Julai, Sabariah and Muthalif, Asan G.A. (2024) Mechanical Properties Comparison of Isotropic vs. Anisotropic Hybrid Magnetorheological Elastomer-Fluid. Polymers, 16 (9). p. 1215. ISSN 2073-4360, DOI https://doi.org/10.3390/polym16091215.
Azeem, Waqar and Shahzad, Muhammad Khuram and Ali, Tasawar and Wong, Yew Hoong and Sfina, N. (2024) Structural, electronic, mechanical, and optical properties of the lead-free halide perovskites XGeCl<sub>3</sub>(X = Cs, K, and Rb) for the photovoltaic and optoelectronic applications. Chinese Journal of Physics, 89. pp. 1362-1376. ISSN 0577-9073, DOI https://doi.org/10.1016/j.cjph.2023.12.041.
Azeem, Waqar and Shahzad, Muhammad Khuram and Wong, Yew Hoong (2024) Rubidium zinc trioxide perovskite materials for photovoltaic solar cell applications: A first principle calculations. Heliyon, 10 (1). ISSN 2405-8440, DOI https://doi.org/10.1016/j.heliyon.2023.e23818.
Azeem, Waqar and Shahzad, Muhammad Khuram and Wong, Yew Hoong and Tahir, Muhammad Bilal (2024) Ab-initio calculations for the study of the hydrogen storage properties of CsXH3 (X1/4 Co, Zn) perovskite- type hydrides. International Journal of Hydrogen Energy, 50 (D). pp. 305-313. ISSN 1879-3487, DOI https://doi.org/10.1016/j.ijhydene.2023.07.072.
Azeem, Waqar and Shahzad, Muhammad Khuram and Wong, Yew Hoong and Tirth, Vineet (2024) A DFT study of structural, electronic, optical, thermal and mechanical properties of cubic perovskite KGeX3 (X = Cl, Br) compound for solar cell applications. Physica Scripta, 99 (3). 035922. ISSN 0031-8949, DOI https://doi.org/10.1088/1402-4896/ad1737.
Baharuddin, Aainaa Aqilah and Ang, Bee Chin and Haseeb, A. S. M. A. and Wong, Yew Hoong (2024) Low operating temperature N-ZnO/PANI chemiresistive acetone gas sensor. Journal of Materials Science-Materials in Electronics, 35 (1). ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-023-11827-3.
Chang, L. and Chong, W.T. and Yau, Y.H. and Cui, T. and Wang, X.R. and Pei, F. and Liu, Y.Q. and Pan, S. (2024) An investigation of the PM2.5 concentrations and cumulative inhaled dose during subway commutes in Changchun, China. International Journal of Environmental Science and Technology, 21 (1). 733 – 746. ISSN 1735-1472, DOI https://doi.org/10.1007/s13762-023-04994-7.
Chang, Yufan and Ai, Zhengtao and Wargocki, Pawel and Liu, Yiqiao and Hu, Yan (2024) Design of convertible patient care unit for both non-pandemic and pandemic times: Prototype, building spatial layout, and ventilation design. Building and Environment, 258. p. 111597. ISSN 0360-1323, DOI https://doi.org/10.1016/j.buildenv.2024.111597.
Chung, E. N. M. and Kittur, Mohammed Ibrahim and Andriyana, Andri and Ganesan, P. (2024) On the thermo-oxidative aging of elastomers: A comprehensive review. Polymer, 304. p. 127109. ISSN 0032-3861, DOI https://doi.org/10.1016/j.polymer.2024.127109.
Cui, Tong and Lu, Rui and Liu, Chuan and Wu, Zehong and Jiang, Xingtao and Liu, Yiqiao and Pan, Song and Li, Yanpeng (2024) Characteristics of second-hand exposure to aerosols from e-cigarettes: A literature review since 2010. Science of the Total Environment, 926. p. 171829. ISSN 0048-9697, DOI https://doi.org/10.1016/j.scitotenv.2024.171829.
Dambatta, Yusuf Suleiman and Li, Changhe and Sayuti, Mohd and Sarhan, Ahmed A.D. and Yang, Min and Li, Benkai and Chu, Anxue and Liu, Mingzheng and Zhang, Yanbin and Said, Zafar and Zhou, Zongming (2024) Grindability Evaluation of Ultrasonic Assisted Grinding of Silicon Nitride Ceramic Using Minimum Quantity Lubrication Based SiO2 Nanofluid. Chinese Journal of Mechanical Engineering, 37 (1). p. 25. ISSN 1000-9345, DOI https://doi.org/10.1186/s10033-024-01011-x.
Fadzallah, Iman Aris and Sabran, Nuur Syahidah and Hasnan, Megat Muhammad Ikhsan Megat and Ono, Takahito and Sabri, Mohd Faizul Mohd (2024) Computational modeling and theoretical analysis of polyvinylidene fluoride microarrays for hybrid piezo-pyroelectric energy harvesting. Polymers for Advanced Technologies, 35 (5). e6419. ISSN 1042-7147, DOI https://doi.org/10.1002/pat.6419.
Fayaz, H. and Ramesh, Singh and Afzal, Asif and Agbulut, Umit and Khan, Sher Afghan and Asif, Mohammed and Raja, Vijayanandh and Linul, Emanoil (2024) Investigation of numerical phase transition of nano-enhanced SiC/paraffin wax PCM in solar-assisted water desalination system. Thermal Science and Engineering Progress, 50. p. 102528. ISSN 2451-9049, DOI https://doi.org/10.1016/j.tsep.2024.102528.
Fayaz, H. and Ramesh, Singh and Raja, Vijayanandh and Linul, Emanoil and Khan, Sher Afghan and Asif, Mohammed and Buradi, Abdulrajak and Samuel, Olusegun David (2024) Temporal numerical analysis of beeswax PCM melting in a cube geometry subjected to a constant wall temperature condition. Case Studies in Thermal Engineering, 56. p. 104273. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2024.104273.
Gan, Woun Yoong and Ghazilla, Raja Ariffin Raja and Yap, Hwa Jen and Selvarajoo, Suman (2024) Industrial practitioner's perception on the application of exoskeleton system in automotive assembly industries: A Malaysian case study. Heliyon, 10 (4). e26183. ISSN 2405-8440, DOI https://doi.org/10.1016/j.heliyon.2024.e26183.
Gerard, Ong and Ramesh, Subramaniam and Ramesh, Kasi and Numan, Arshid and Mustafa, Muhammad Norhaffis and Khalid, Mohammad and Ramesh, Singh and Tiong, S.K. (2024) Evaluation of the effect of precursor ratios on the electrochemical performances of binder-free NiMn-phosphate electrodes for supercapattery. Journal of Colloid and Interface Science, 667. pp. 585-596. ISSN 0021-9797, DOI https://doi.org/10.1016/j.jcis.2024.04.101.
Ghazali, Nadiah and Basirun, Wan Jeffrey and Nor, Azmi Mohammed and Johan, Mohd Rafie and Rahman, Fariza Abdul (2024) Corrosion-resistant super-amphiphobic (PVDF-fnAl2O3) coating with thermal and mechanical stability. Journal of Coatings Technology and Research, 21 (2). pp. 589-599. ISSN 1547-0091, DOI https://doi.org/10.1007/s11998-023-00840-0.
Gopalan, Thirumaaran and Muhamad, Mohd Ridha and Hoe, Victor Chee Wai and Hassandarvish, Pouya (2024) N95 respirator hybrid decontamination method using Ultraviolet Germicidal Irradiation (UVGI) coupled with Microwave-Generated Steam (MGS). PLoS ONE, 19 (2 Febr). ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0296871.
Gopalan, Thirumaaran and Muhamad, Mohd Ridha and Hoe, Victor Chee Wai and Hassandarvish, Pouya (2024) N95 respirator hybrid decontamination method using Ultraviolet Germicidal Irradiation (UVGI) coupled with Microwave-Generated Steam (MGS). PLoS ONE, 19 (2). e0296871. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0296871.
Hussain, Ghulam and Shehbaz, Tauheed and Alkahtani, Mohammed and Khaliq, Usman Abdul and Wei, Hongyu (2024) Nanomechanical, mechanical and microstructural characterization of electron beam welded Al2219-T6 tempered aerospace grade alloy: A comprehensive study. Heliyon, 10 (1). ISSN 2405-8440, DOI https://doi.org/10.1016/j.heliyon.2023.e23835.
Ibrahim, Farah Arina and Muhamad, Mohd Ridha and Mohd Zubir, Mohd Nashrul and Omar, Mohd and Siri, Zailan and Hasan, Rony Mehedy and Eid, Mohamed Moustafa Abdelhalim Ahmed (2024) Experimental Analysis of the Improvement of Heat Transfer in Tube Heat Exchangers Via Passive Flow Generators Using Wire Coil Inserts. ASME Journal of Heat and Mass Transfer, 146 (6). 061901. ISSN 2832-8450, DOI https://doi.org/10.1115/1.4065115.
Jabbar, Waheb A. and Ting, Tan Mei and Hamidun, M. Fikri I. and Kamarudin, Ajwad H. Che and Wu, Wenyan and Sultan, Jamil and Alsewari, AbdulRahman A. and Ali, Mohammed A. H. (2024) Development of LoRaWAN-based IoT system for water quality monitoring in rural areas. Expert Systems with Applications, 242. ISSN 0957-4174, DOI https://doi.org/10.1016/j.eswa.2023.122862.
Javeed, Yasmeena and Goh, Yingxin and Mo, Kim Hung and Yap, Soon Poh and Leo, Bey Fen (2024) Microbial self-healing in concrete: A comprehensive exploration of bacterial viability, implementation techniques, and mechanical properties. Journal of Materials Research and Technology-JMR&T, 29. pp. 2376-2395. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2024.01.261.
Jiwanti, Prastika Krisma and Sukardi, Dewi Kartika Azizah and Sari, Anis Puspita and Tomisaki, Mai and Wafiroh, Siti and Hartati, Sri and Arramel, - and Wong, Yew Hoong and Woi, Pei Meng and Juan, Joon Ching (2024) Fabrication and characterization of rGO-SnO2 nanocomposite for electrochemical sensor of ciprofloxacin. Sensors International, 5. p. 100276. ISSN 2666-3511, DOI https://doi.org/10.1016/j.sintl.2023.100276.
Kumar, Sachin Sharma Ashok and Ramesh, Kasi and Ramesh, Subramaniam and Ramesh, Subramaniam and Bang, Le Thi (2024) A study on hybrid composite coatings: The significance of its surface wettability, dispersibility and thermal degradation performances. Progress in Organic Coatings, 189. p. 108351. ISSN 0300-9440, DOI https://doi.org/10.1016/j.porgcoat.2024.108351.
Lin, Jiayi and Tan, Tee How and Yeo, Jerome Song and Goh, Yingxin and Ling, Tung-Chai and Mo, Kim Hung (2024) Optimization of the manufacturing process and properties of alkali-activated palm oil fuel ash-based cold-bonded aggregates. Journal of Cleaner Production, 437. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2024.140714.
Lin, Jiayi and Tan, Tee How and Yeo, Jerome Song and Goh, Yingxin and Ling, Tung-Chai and Mo, Kim Hung (2024) Optimization of the manufacturing process and properties of alkali-activated palm oil fuel ash-based cold-bonded aggregates. Journal of Cleaner Production, 437. p. 140714. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2024.140714.
Liu, Yiqiao and Chong, Wen Tong and Yau, Yat Huang and Wu, Jinshun and Chang, Yufan and Cui, Tong and Chang, Li and Pan, Song (2024) A hybrid learning approach to model the diversity of window-opening behavior. Building and Environment, 257. p. 111525. ISSN 0360-1323, DOI https://doi.org/10.1016/j.buildenv.2024.111525.
Liu, Yunpeng and Dong, Lin and Sabri, Mohd Faizul Mohd and Majid, Nazia Abdul and Ibrahim, Suriani (2024) Advancements in tunable and multifunctional metamaterial absorbers: a comprehensive review of microwave to terahertz frequency range. Journal of Physics D: Applied Physics, 57 (29). p. 293002. ISSN 0022-3727, DOI https://doi.org/10.1088/1361-6463/ad32a6.
Liu, Yunpeng and Ibrahim, Suriani and Majid, Nazia Abdul and Mohd Sabri, Mohd Faizul and Sun, Jianwen and Zhuo, Qiming and Liu, Wei (2024) Adaptive impedance matching in microwave and terahertz metamaterial absorbers using PIN diodes and GaN HEMTs. Journal of Physics D: Applied Physics, 57 (31). p. 315101. ISSN 0022-3727, DOI https://doi.org/10.1088/1361-6463/ad4565.
Mansor, Muhammad Safwan Mohd and Raja, Sufian and Yusof, Farazila and Muhamad, Mohd Ridha and Manurung, Yupiter HP. and Adenan, Mohd Shahriman and Hussein, Nur Izan Syahriah and Ren, James (2024) Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies. Journal of Materials Research and Technology-JMR&T, 30. pp. 2478-2499. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2024.03.170.
Matsuno, Takashi and Ueda, Yuya and Takahashi, Tomoya and Hama, Takayuki and Hojo, Tomohiko and Shibayama, Yuki and Muhamad, Mohd Ridha and Okitsu, Yoshitaka and Takamura, Masato (2024) Delayed fracture stress thresholds degraded by the shear punching process in ultra-high-strength steel sheets: Analysis using an in-plane bending test with numerical assimilation. Journal of Manufacturing Processes, 119. pp. 1005-1021. ISSN 1526-6125, DOI https://doi.org/10.1016/j.jmapro.2024.04.013.
Mohamad-Ali, Nurhasyimah and Saman, Muhamad Zameri Mat and Ghazilla, Raja Ariffin Raja (2024) A model for end-of-life recovery in the automotive sector in Malaysia. Sustainable Production and Consumption, 46. pp. 180-194. ISSN 2352-5509, DOI https://doi.org/10.1016/j.spc.2024.02.020.
Mohammadi, Hossein and Beddu, Salmia and Petra, Michal and Sepantafar, Mohammadmajid and Ebadi, Mona and Yap, Boon Kar and Bang, Le Thi and Yong, Tan Chou and Ramesh, Singh and Koloor, Seyed Saeid Rahimian (2024) Advances in silicon nitride ceramic biomaterials for dental applications - A review. Journal of Materials Research and Technology-JMR&T, 28. pp. 2778-2791. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2023.12.186.
Mohanty, Asit and Ray, Prakash K. and Das, Soumya Ranjan and Soudagar, Manzoore Elahi M. and Ramesh, Singh and Khan, T.M. Yunus and Almakayeel, Naif and Ali, M. Mahmood and Bashir, Muhammad Nasir (2024) Enhancing power quality in contemporary utility systems: A comprehensive analysis of active power filters and control strategies. Energy Reports, 11. pp. 5575-5592. ISSN 2352-4847, DOI https://doi.org/10.1016/j.egyr.2024.05.033.
Mohd Jamil, Muhammad Zulhiqmi and Isa, Mohammad Syahid Mohd and Raja, Sufian and bin Muhamad, Mohd Ridha and Yusof, Farazila and Hasnan, Hijaz Kamal and Jamaludin, Mohd Fadzil and Brytan, Zbigniew and Liu, Huihong and Suga, Tetsuo and Morisada, Yoshiaki and Fujii, Hidetoshi (2024) Friction stir alloying AZ61 magnesium alloy and mild steel with Zn-CNT additive. Transactions of the Indian Institute of Metals, 77 (2). pp. 435-443. ISSN 0972-2815, DOI https://doi.org/10.1007/s12666-023-03124-8.
Mulkan, Andi and Zulkifli, Nurin Wahidah Mohd and Husin, Husni and Ahmadi, - and Dahlan, Irvan (2024) Performance and emissions assessment under full load operation of an unmodified diesel engine running on biodiesel-based waste cooking oil synthesized using JPW solid catalyst. Renewable Energy, 224. p. 120145. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2024.120145.
Murugan, Ravikumar and Hwa, Kuo-Yuan and Santhan, Aravindan and Ibrahim, Suriani (2024) ZnO/B-g-C3N4 nanoplatelet/nanosheet heterostructures for the electrochemical detection of metol in real sample analysis. ACS Applied Nano Materials, 7 (2). 2072 – 2085. ISSN 2574-0970, DOI https://doi.org/10.1021/acsanm.3c05333.
Nagaprasad, K.S. and Banapurmath, N.R. and Madhu, D. and Soudagar, Manzoore Elahi M. and Mujtaba, M.A. and Kalam, M.A. and Vadlamudi, Chandramouli and Krishnappa, Sanjay (2024) Emission characteristics of diesel engines fuelled with B20 with different DPF, DOC and EGR arrangements. International Journal of Ambient Energy, 45 (1). ISSN 0143-0750, DOI https://doi.org/10.1080/01430750.2023.2277308.
Nagata, Yoshihiro and Kato, Kiyotaka and Shishido, Takuma and Tsuchiya, Ao and Kitaoka, Sanji and Oshiro, Naoto and Nishi, Naomi and Nonaka, Naoki and Koike, Takayuki and Oike, Toshimitsu and Hayashi, Kenji and Kambe, Hiroshi and Okane, Toshimitsu and Muhammad, Khairi Faiz and Yoshida, Makoto (2024) Development of high-ductility and low-hot-tearing-susceptibility non-heat treatment Al-Mg-Mn-Based die casting alloy for automotive structural parts. International Journal of Metalcasting, 18 (1). pp. 46-59. ISSN 1939-5981, DOI https://doi.org/10.1007/s40962-023-01047-0.
Ong, Zhi Chao and Zahid, Fahad and Lee, Derk Huan and Juartiyono, Bayu Aryadica and Khoo, Shin Yee and Mohd Salleh, Mohd Fairuz (2024) Development and Implementation of Upscaled Automated Phase-Controlled Impact Device for In-Service Modal Analysis. Journal of Vibration Engineering & Technologies, 12 (4). pp. 5771-5786. ISSN 2523-3920, DOI https://doi.org/10.1007/s42417-023-01217-8.
Qin, Mingyuan and Chew, Bee Teng and Han, Xiaofei and Yang, Zhen and Cui, Tong and Deng, Fei and Pan, Song (2024) A novel evaluation indicator and optimal heating strategy for using an intermittent-operation catalytic combustion heater in open cold environments. Building and Environment, 252. p. 111271. ISSN 0360-1323, DOI https://doi.org/10.1016/j.buildenv.2024.111271.
Qin, Mingyuan and Chew, Bee Teng and Yau, Yat Huang and Li, Chao and Liu, Yiqiao and Han, Xiaofei and Chao, Ong Zhi and Pan, Song (2024) Thermal comfort characteristics of a catalytic combustion heater under wind-chilled exposure. Journal of Cleaner Production, 436. p. 140701. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2024.140701.
Qin, Mingyuan and Chew, Bee Teng and Yau, Yat Huang and Li, Chao and Liu, Yiqiao and Han, Xiaofei and Chao, Ong Zhi and Pan, Song (2024) Thermal comfort characteristics of a catalytic combustion heater under wind-chilled exposure. Journal of Cleaner Production, 436. ISSN 0959-6526, DOI https://doi.org/10.1016/j.jclepro.2024.140701.
Raja, Sufian and Yusof, Farazila and Muhamad, Mohd Ridha and Mansor, Muhammad Safwan Mohd and Juri, Azib and Wu, Bo and Jamaludin, Mohd Fadzil and Ansari, Nooruddin and Ren, James (2024) Formation and influencing mechanism of the intermetallic compound in the friction stir welding of immiscible AZ31 and SPHC steel using aluminium powder as an additive. Journal of Materials Research and Technology-JMR&T, 30. pp. 9102-9114. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2024.05.249.
Saher, Saim and Tan, Chou Yong and Ramesh, Singh and Yap, Boon Kar and Ong, Boon Hoong and Mo, Kim Hung and Al-Furjan, M. S. H. (2024) Unveiling the role of K2NiF4-Structure Pr4Ni3O10+6 surface coverage in boosting oxygen permeation and suppressing membrane degradation. Separation and Purification Technology, 330 (C). ISSN 1383-5866, DOI https://doi.org/10.1016/j.seppur.2023.125515.
Saher, Saim and Tan, Chou Yong and Ramesh, Singh and Yap, Boon Kar and Ong, Boon Hoong and Mo, Kim Hung and Al-Furjan, M. S. H. (2024) A way to limit the long-term degradation of solid oxide fuel cell cathode by decorating the surface with K2NiF4-Structure Pr4Ni3O10+δ phase. Journal of Power Sources, 592. ISSN 0378-7753, DOI https://doi.org/10.1016/j.jpowsour.2023.233899.
Sajid, Imran Haider and Aslfattahi, Navid and Salleh, Mohd Faiz Mohd and Ghazali, Nik Nazri Nik and Saidur, R. and Tahir, Muhammad and Bashir, Mohamed Bashir Ali and Sabri, Mohd Faizul Mohd (2024) High thermoelectric performance of multiwalled carbon nanotubes based ionogels. Materials Today Communications, 38. p. 108334. ISSN 2352-4928, DOI https://doi.org/10.1016/j.mtcomm.2024.108334.
Sarraf, Masoud and Musharavati, Farayi and Jaber, Fadi and Bushroa, A. R. and Zalnezhad, Erfan and Nasor, Mohamed and Bae, Sungchul and Chowdhury, Muhammad and Dabbagh, Ali (2024) Anodization and nonstructural surface characterizations of fabricated Ti-29Nb-13Ta-7.1Zr alloy for biomedical applications and its mechanical, wettability, tribological, and corrosion properties. Materials Chemistry and Physics, 314. p. 128825. ISSN 0254-0584, DOI https://doi.org/10.1016/j.matchemphys.2023.128825.
Sarraf, Masoud and Musharavati, Farayi and Jaber, Fadi and Bushroa, A.R. and Zalnezhad, Erfan and Nasor, Mohamed and Bae, Sungchul and Chowdhury, Muhammad and Dabbagh, Ali (2024) Anodization and nonstructural surface characterizations of fabricated Ti–29Nb–13Ta–7.1Zr alloy for biomedical applications and its mechanical, wettability, tribological, and corrosion properties. Materials Chemistry and Physics, 314. p. 128825. ISSN 0254-0584, DOI https://doi.org/10.1016/j.matchemphys.2023.128825.
Sasidharan, Manoj and Sabri, Mohd Faizul Mohd and Hatta, Sharifah Fatmadiana Wan Muhammad and Ibrahim, Suriani (2024) A review on the progress and development of thermoelectric air conditioning system. International Journal of Green Energy, 21 (2). pp. 283-299. ISSN 1543-5075, DOI https://doi.org/10.1080/15435075.2023.2195924.
Selvarajoo, Suman and Ghazilla, Raja Ariffin Raja and Mamat, Azuddin (2024) AN EXPLORATORY OBSERVATION INTO THE STATUS OF COLLABORATIVE MANUFACTURING FOR TOOL AND DIE DEVELOPMENT IN MALAYSIA. International Journal of Industrial Engineering-Theory Applications and Practice, 31 (2). pp. 398-412. ISSN 1943-670X, DOI https://doi.org/10.23055/ijietap.2024.31.2.9775.
Shahapurkar, Kiran and Gebremaryam, Gezahgn and Kanaginahal, Gangadhar and Ramesh, S. and Nik Ghazali, Nik Nazri and Chenrayan, Venkatesh and Soudagar, Manzoore Elahi M. and Fouad, Yasser and Kalam, M. A. (2024) An Experimental Study on the Hardness, Inter Laminar Shear Strength, and Water Absorption Behavior of Habeshian Banana Fiber Reinforced Composites. Journal Of Natural Fibers, 21 (1). p. 2338930. ISSN 1544-0478, DOI https://doi.org/10.1080/15440478.2024.2338930.
Sopyan, Iis and Toibah, Abdul Rahim and Ramesh, Singh and Mel, Maizirwan and Alqap, Asep Sofwan Faturahman (2024) Magnesium-enhanced porous hydroxyapatite ceramics: Morphometric parameters, physical properties and bioactivity. Ceramics International, 50 (7, A). pp. 10967-10973. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2023.12.413.
Soudagar, Manzoore Elahi M. and Ramesh, S. and Khan, T. M. Yunus and Almakayeel, Naif and Ramesh, R. and Ghazali, Nik Nazri Nik and Cuce, Erdem and Shelare, Sagar (2024) An overview of the existing and future state of the art advancement of hybrid energy systems based on PV-solar and wind. International Journal of Low-Carbon Technologies, 19. pp. 207-216. ISSN 1748-1317, DOI https://doi.org/10.1093/ijlct/ctad123.
Soudagar, Manzoore Elahi M. and Ramesh, S. and Yunus Khan, T.M. and Almakayeel, Naif and Ramesh, R. and Nik Ghazali, Nik Nazri and Cuce, Erdem and Shelare, Sagar (2024) An overview of the existing and future state of the art advancement of hybrid energy systems based on PV-solar and wind. International Journal of Low-Carbon Technologies, 19. 207 – 216. ISSN 1748-1317, DOI https://doi.org/10.1093/ijlct/ctad123.
Soudagar, Manzoore Elahi M. and Shelare, Sagar and Marghade, Deepali and Belkhode, Pramod and Nur-E-Alam, Mohammad and Kiong, Tiong S. and Ramesh, Singh and Rajabi, Armin and Venu, Harish and Khan, T.M. Yunus and Mujtaba, Ma and Shahapurkar, Kiran and Kalam, Ma and Fattah, I.M.R. (2024) Optimizing IC engine efficiency: A comprehensive review on biodiesel, nanofluid, and the role of artificial intelligence and machine learning. Energy Conversion and Management, 307. p. 118337. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2024.118337.
Su, Guangcan and Jiang, Peng (2024) Machine learning models for predicting biochar properties from lignocellulosic biomass torrefaction. Bioresource Technology, 399. p. 130519. ISSN 0960-8524, DOI https://doi.org/10.1016/j.biortech.2024.130519.
Su, Guangcan and Jiang, Peng and Zhou, Hewen and Zulkifli, Nurin Wahidah Mohd and Ong, Hwai Chyuan and Ibrahim, Shaliza (2024) Integrated production of methanol and biochar from bagasse and plastic waste: A three-in-one solution for carbon sequestration, bioenergy production, and waste valorization. Energy Conversion and Management, 307. p. 118344. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2024.118344.
Tan, Chin Joo (2024) Effect of meshing technique and time discretization size on thickness strain localization during hole-flanging simulation of DP980 sheet at high strain level. Alexandria Engineering Journal, 86. pp. 360-372. ISSN 1110-0168, DOI https://doi.org/10.1016/j.aej.2023.11.062.
Tan, Huiyi and Othman, Mohd Hafiz Dzarfan and Chong, Wen Tong and Kek, Hong Yee and Wong, Syie Luing and Nyakuma, Bemgba Bevan and Mong, Guo Ren and Wahab, Roswanira Abdul and Wong, Keng Yinn (2024) Turning plastics/microplastics into valuable resources? Current and potential research for future applications. Journal of Environmental Management, 356. p. 120644. ISSN 0301-4797, DOI https://doi.org/10.1016/j.jenvman.2024.120644.
Tan, Shi Hao and Chuah, Joon Huang and Chow, Chee-Onn and Kanesan, Jeevan and Leong, Hung Yang (2024) Artificial intelligent systems for vehicle classification: A survey. Engineering Applications of Artificial Intelligence, 129. ISSN 0952-1976, DOI https://doi.org/10.1016/j.engappai.2023.107497.
Tang, Raymond Chong Ong and Jaiswal, Manas and Wang, Chin-Tsan and Ong, Zhi Chao and Ong, Hwai Chyuan (2024) Effect of bluff body embedded in flow channel on power performance of microbial fuel cell. Fuel, 359. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2023.130370.
Wang, Linfeng and Onn, Chiu Chuen and Chew, Bee Teng and Li, Wuyan and Li, Yongcai (2024) Numerical Study of the Solar Energy-Powered Embedded Pipe Envelope System. Buildings, 14 (3). p. 613. ISSN 2075-5309, DOI https://doi.org/10.3390/buildings14030613.
Wang, Xinru and Meng, Xin and Chang, Li and Pei, Fei and Wan, Taocheng and Cui, Tong and Liu, Yiqiao and Pan, Song (2024) Concentration, composition and exposure risk assessment of particulate matter with different particle sizes in subway stations. Building and Environment, 258. p. 111604. ISSN 0360-1323, DOI https://doi.org/10.1016/j.buildenv.2024.111604.
Wang, Zhenya and Luo, Qiusheng and Chen, Hui and Zhao, Jingshan and Yao, Ligang and Zhang, Jun and Chu, Fulei (2024) A high-accuracy intelligent fault diagnosis method for aero-engine bearings with limited samples. Computers in Industry, 159. p. 104099. ISSN 0166-3615, DOI https://doi.org/10.1016/j.compind.2024.104099.
Wei, Yixuan and Zhang, Yixing and Xu, Yifei and Wang, Shu and Liu, Jianguo and Jin, Longzhe and Ou, Shengnan and Pan, Song and Liu, Yiqiao (2024) Impact of risk preferences on evacuee behavior and attention distribution in urban underground space evacuations. Physica A-Statistical Mechanics And Its Applications, 640. p. 129698. ISSN 0378-4371, DOI https://doi.org/10.1016/j.physa.2024.129698.
Wu, Bo and Yusof, Farazila and Li, Fuguo and Abdul Razak, Bushroa and Muhamad, Mohd Ridha and Badruddin, Irfan Anjum and Hussien, Mohamed and Kamangar, Sarfaraz and Ibrahim, Mahmoud Zakaria (2024) Influence of friction stir processing parameters on microstructure, hardness and corrosion resistance of biocompatible Mg alloy WE43. Arabian Journal for Science and Engineering, 49 (2). 1897 – 1911. ISSN 2193-567X, DOI https://doi.org/10.1007/s13369-023-08037-8.
Wu, Bo and Yusof, Farazila and Li, Fuguo and Miao, Huan and Bushroa, A. R. and Muhamad, Mohd Ridha and Badruddin, Irfan Anjum and Ibrahim, Mahmoud Z. (2024) Effects of friction stir processing and nano-hydroxyapatite on the microstructure, hardness, degradation rate and in-vitro bioactivity of WE43 alloy for biomedical applications. Journal of Magnesium and Alloys, 12 (1). pp. 209-224. ISSN 2213-9567, DOI https://doi.org/10.1016/j.jma.2023.10.010.
Xu, Hongpeng and Chen, Hui and Ali, Mohammed A.H. and Liu, Wei and Wang, Zhenya (2024) Anti-windup uniform fuzzy control for uncertain wheeled mobile robots. Journal of The Franklin Institute, 361 (7). p. 106807. ISSN 0016-0032, DOI https://doi.org/10.1016/j.jfranklin.2024.106807.
Yan, Junbao and Cai, Yuhan and Zhang, Hanwen and Han, Mingyue and Liu, Xueyang and Chen, Haojie and Cheng, Cui and Lei, Tong and Wang, Luoxin and Wang, Hua and Xiong, Siwei (2024) Rapid Thermochromic and Highly Thermally Conductive Nanocomposite Based on Silicone Rubber for Temperature Visualization Thermal Management in Electronic Devices. ACS Applied Materials & Interfaces, 16 (6). pp. 7883-7893. ISSN 1944-8244, DOI https://doi.org/10.1021/acsami.3c17947.
Yang, Guang and Lee, Ee Lynn and Yang, Kai and Wu, Fengshun and Zhou, Longzao and Ding, Liguo and Li, Kewei and Li, Xuemin (2024) Pressure sintering of micro-silver joints in SiC power devices: Optimization of processing parameters and FEM analysis. Journal of Electronic Materials, 53 (3). 1313 – 1332. ISSN 0361-5235, DOI https://doi.org/10.1007/s11664-023-10822-y.
Yau, Yat Huang and Rajput, Umair Ahmed and Badarudin, Ahmad (2024) A comprehensive review of variable refrigerant flow (VRF) and ventilation designs for thermal comfort in commercial buildings. Journal of Thermal Analysis and Calorimetry, 149 (5). pp. 1935-1961. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-023-12837-3.
Zainorahim, Norhayati and Taufek, Norhidayah Mohd and Ganesan, Poo Balan and Tan, Geok Yuan Annie and Yusof, Hanan Mohd (2024) Hermetia illucens Larvae Meal as Partial Fishmeal Replacement in Jade Perch Diet Cultured in Biofloc: Growth Performance, Feed Efficiency and Consumer Acceptance. Sains Malaysiana, 53 (3). pp. 501-518. ISSN 0126-6039, DOI https://doi.org/10.17576/jsm-2024-5303-03.
Zakaria, Nurul Zariah Jakaria and Rozali, Shaifulazuar and Mubarak, Nabisab Mujawar and Ibrahim, Suriani (2024) A review of the recent trend in the synthesis of carbon nanomaterials derived from oil palm by-product materials. Biomass Conversion and Biorefinery, 14 (1). 13 – 44. ISSN 2190-6815, DOI https://doi.org/10.1007/s13399-022-02430-3.
Zhang, Xing Gang and Buthiyappan, Archina and Jewaratnam, Jegalakshimi and Metselaar, Hendrik Simon Cornelis and Abdul Raman, Abdul Aziz (2024) Bifunctional materials for integrated CO2 capture and conversion: Review on adsorbent and catalyst types, recent advances, and challenges. Journal of Environmental Chemical Engineering, 12 (1). ISSN 2213-3437, DOI https://doi.org/10.1016/j.jece.2023.111799.
Zhang, Xing Gang and Buthiyappan, Archina and Jewaratnam, Jegalakshimi and Metselaar, Hendrik Simon Cornelis and Raman, Abdul Aziz Abdul (2024) Bifunctional materials for integrated CO2 capture and conversion: review on adsorbent and catalyst types, recent advances, and challenges. Journal of Environmental Chemical Engineering, 12 (1). p. 111799. ISSN 2213-2929, DOI https://doi.org/10.1016/j.jece.2023.111799.
Zhou, Zhuo and Andriyana, Andri and Guan, Deqing and Chen, Jian (2024) Evaluating the fatigue life of notched components based on the stress gradient model with variable support effects. Materials & Design, 239. p. 112793. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2024.112793.
