 | Up a level |
AbdRabbuh, O. Almatar and Oon, C. S. and Kazi, S. N. and Abdelrazek, A. H. and Ahmed, Wasiar and Mallah, A. R. and Badarudin, A. and Badruddin, Irfan Anjum and Kamangar, Sarfaraz (2021) An experimental investigation of eco-friendly treated GNP heat transfer growth: circular and square conduit comparison. Journal of Thermal Analysis and Calorimetry, 145 (1). pp. 139-151. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-020-09652-5.
Abidi, Awatef and Ahmadi, Amir and Enayati, Mojtaba and Sajadi, S. Mohammad and Yarmand, Hooman and Ahmed, Arslan and Cheraghian, Goshtasp (2021) A review of the methods of modeling multi-phase flows within different microchannels shapes and their applications. Micromachines, 12 (9). ISSN 2072-666X, DOI https://doi.org/10.3390/mi12091113.
Adebayo, Ganiyat Olusola and Hassan, Aziz and Yahya, Rosiyah and Muhamad Sarih, Norazilawati and Odesanya, Kazeem Olabisi (2021) Impact of water saturation on the tensile and thermal properties of heat-treated mangrove/high-density polyethylene composites. Journal of Thermoplastic Composite Materials, 34 (4). pp. 508-522. ISSN 0892-7057, DOI https://doi.org/10.1177/0892705719847238.
Ahmad, Nur Farrahain Nadia and Nik Ghazali, Nik Nazri and Wong, Yew Hoong (2021) Wearable patch delivery system for artificial pancreas health diagnostic-therapeutic application: A review. Biosensors and Bioelectronics, 189. ISSN 0956-5663, DOI https://doi.org/10.1016/j.bios.2021.113384.
Ahmed, Waqar and Kazi, S. N. and Chowdhury, Zaira Zaman and Johan, Mohd Rafie and Soudagar, Manzoore Elahi M. and Mujtaba, M. A. and Gul, M. and Badruddin, Irfan Anjum and Kamangar, Sarfaraz (2021) Ultrasonic assisted new Al2O3@TiO2-ZnO/DW ternary composites nanofluids for enhanced energy transportation in a closed horizontal circular flow passage. International Communications in Heat and Mass Transfer, 120. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2020.105018.
Ahmed, Waqar and Zaman Chowdhury, Zaira and Kazi, Salim Newaz and Johan, Mohd Rafie and Badruddin, Irfan Anjum and Soudagar, Manzoore Elahi M. and Kamangar, Sarfaraz and Mujtaba, Muhammad Abbas and Gul, Mustabshirha and Khan, T. M. Yunus (2021) Evaluation on enhanced heat transfer using sonochemically synthesized stable zno-eg@dw nanofluids in horizontal calibrated circular flow passage. Energies, 14 (9). ISSN 1996-1073, DOI https://doi.org/10.3390/en14092400.
Akhir, Nur Atiqah Mohd and Othman, Maizatulnisa and Buys, Yose Fachmi and Shaffiar, Norhashimah and Jimat, Dzun Noraini and Shaharuddin, Sharifah Imihezri Syed (2021) Characterization and melt spinning of poly (lactic acid)/poly (ethylene glycol) blends. IIUM Engineering Journal, 22 (1). pp. 201-213. ISSN 1511-788X, DOI https://doi.org/10.31436/iiumej.v22i1.1364.
Akkoli, K. M. and Banapurmath, N. R. and Shivashimpi, M. M. and Soudagar, Manzoore Elahi M. and Badruddin, Irfan Anjum and Alazwari, Mashhour A. and Yaliwal, V. S. and Mujtaba, M. A. and Akram, Naveed and Goodarzi, Marjan and Safaei, Mohammad Reza and Venu, Harish (2021) Effect of injection parameters and producer gas derived from redgram stalk on the performance and emission characteristics of a diesel engine. Alexandria Engineering Journal, 60 (3). pp. 3133-3142. ISSN 1110-0168, DOI https://doi.org/10.1016/j.aej.2021.01.047.
Akkoli, K. M. and Banapurmath, N. R. and Suresh, G. and Soudagar, Manzoore Elahi M. and Khan, T. M. Yunus and Baig, Maughal Ahmed Ali and Mujtaba, M. A. and Hossain, Nazia and Shahapurkar, Kiran and Elfasakhany, Ashraf and Alsehli, Mishal and Yaliwal, V. S. and Goudadi, S. A. (2021) Effect of Producer Gas from Redgram Stalk and Combustion Chamber Types on the Emission and Performance Characteristics of Diesel Engine. Energies, 14 (18). ISSN 1996-1073, DOI https://doi.org/10.3390/en14185879.
Akram, Naveed and Montazer, Elham and Kazi, Md. Salim Newaz and Soudagar, Manzoore Elahi M. and Ahmed, Waqar and Mohd Zubir, Mohd Nashrul Mohd and Afzal, Asif and Muhammad, Mohd Ridha and Ali, Hafiz Muhammad and Marquez, Fausto Pedro Garcia and Sarsam, Wail Sami (2021) Experimental investigations of the performance of a flat-plate solar collector using carbon and metal oxides based nanofluids. Energy, 227. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2021.120452.
Al'Aidrus, Sharifah Nuriza Binti Syed Muhammad Naquib and Siri, Zailan and Mohd Zubir, Mohd Nashrul (2021) Marangoni convection of nanofluid in a wavy trapezoidal enclosure. Thermal Science, 25 (SI). S339-S345. ISSN 0354-9836, DOI https://doi.org/10.2298/TSCI21S2339A.
Alawi, Omer A. and Kamar, Haslinda Mohamed and Mallah, Abdul Rahman and Mohammed, Hussein A. and Sabrudin, Mohd Aizad Sazrul and Hussein, Omar A. and Kazi, Salim Newaz and Najafi, Gholamhassan (2021) Graphene nanoplatelets suspended in different basefluids based solar collector: An experimental and analytical study. Processes, 9 (2). ISSN 2227-9717, DOI https://doi.org/10.3390/pr9020302.
Alawi, Omer A. and Kamar, Haslinda Mohamed and Mallah, Abdul Rahman and Mohammed, Hussein A. and Sabrudin, Mohd Aizad Sazrul and Newaz, Kazi Md Salim and Najafi, Gholamhassan and Yaseen, Zaher Mundher (2021) Experimental and theoretical analysis of energy efficiency in a flat plate solar collector using monolayer graphene nanofluids. Sustainability, 13 (10). ISSN 2071-1050, DOI https://doi.org/10.3390/su13105416.
Alias, Rodianah and Rizwan, Muhammad and Mahmoodian, Reza and Vellasamy, K. M. and Hamdi, Mohd (2021) Physico-chemical and antimicrobial properties of Ag/Ta2O5 nanocomposite coatings. Ceramics International, 47 (17). pp. 24139-24148. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2021.05.125.
Anuar, Hazleen and Abd Rashid, Siti Munirah Salimah and Nordin, Nurfarahin Mohd and Ali, Fathilah and Buys, Yose Fachmi and Thomas, Sabu and Nasir, Nur Aimi Mohd and Asri, Syazeven Effatin Azma Mohd (2021) Potential of fabrication of durian skin fiber biocomposites for food packaging application through the electricity impact analysis. IIUM Engineering Journal, 22 (2). pp. 294-305. ISSN 1511-788X, DOI https://doi.org/10.31436/iiumej.v22i2.1673.
Arafat, M. M. and Dinan, B. and Haseeb, A. S. M. A. and Akbar, S. A. and Rahman, B. M. A. and Rozali, S. and Naher, S. (2021) Growth of 1D TiO2 nanostructures on Ti substrates incorporated with residual stress through humid oxidation and their characterizations. Nanotechnology, 32 (47). ISSN 0957-4484, DOI https://doi.org/10.1088/1361-6528/ac1d77.
Arifutzzaman, A. and Ismail, Ahmad Faris Bin and Alam, Md Zahangir and Khan, Ahsan Ali and Aslfattahi, Navid and Saidur, R. (2021) Static and dynamic combined effects on the thermal conductivity of water based ironoxide nanofluids: Experiments and theories. Smart Science, 9 (2). pp. 133-146. ISSN 2308-0477, DOI https://doi.org/10.1080/23080477.2021.1907700.
Arudi, Ishiaka Shaibu and Hamzah, Esah and Mat Yajid, Muhammad Azizi and Abdul Razak, Bushroa (2021) Effect of DC power on the thickness, hardness and adhesion strength of Ti-51 at% Ni coated Ti/TiN. Journal of Metals, Materials and Minerals, 31 (3). pp. 118-126. ISSN 0857-6149, DOI https://doi.org/10.14456/jmmm.2021.47.
Ashrafi, Negin and Ariff, Azmah Hanim Mohamed and Sarraf, Masoud and Sulaiman, Shamsuddin and Hong, Tang Sai (2021) Microstructural, thermal, electrical, and magnetic properties of optimized Fe3O4-SiC hybrid nano filler reinforced aluminium matrix composite. Materials Chemistry and Physics, 258. ISSN 0254-0584, DOI https://doi.org/10.1016/j.matchemphys.2020.123895.
Athani, Abdulgaphur and Nik Ghazali, Nik Nazri and Badruddin, Irfan Anjum and Usmani, Abdullah Y. and Kamangar, Sarfaraz and Anqi, Ali E. and Ahammad, Nandalur Ameer (2021) Two-phase non-newtonian pulsatile blood flow simulations in a rigid and flexible patient-specific Left Coronary Artery (LCA) exhibiting multi-stenosis. Applied Sciences-Basel, 11 (23). ISSN 2076-3417, DOI https://doi.org/10.3390/app112311361.
Belkhode, Pramod N. and Shelare, Sagar D. and Sakhale, Chandrashekhar N. and Kumar, Ravinder and Shanmugan, S. and Soudagar, Manzoore Elahi M. and Mujtaba, M. A. (2021) Performance analysis of roof collector used in the solar updraft tower. Sustainable Energy Technologies and Assessments, 48. ISSN 2213-1388, DOI https://doi.org/10.1016/j.seta.2021.101619.
Boudouh, Djahida and Hamana, Djamel and Metselaar, Hendrik Simon Cornelis and Achour, Slimane and Chetibi, Loubna and Akhiani, Amir Reza (2021) Low-temperature green route synthesis of fe3o4-c nanocomposite using olive leaves extract. Materials Science and Engineering: B, 271. ISSN 0921-5107, DOI https://doi.org/10.1016/j.mseb.2021.115276.
Boudouh, Djahida and Ikram, Rabia and Mohamed Jan, Badrul and Simon Cornelis Metselaar, Hendrik and Hamana, Djamel and Kenanakis, George (2021) Synthesis, characterization and filtration properties of ecofriendly fe3o4 nanoparticles derived from olive leaves extract. Materials, 14 (15). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14154306.
Chahrour, Mutaz K. and Hosen, Md. Akter and Goh, Yingxin and Tong, Teong Yen and Yap, Soon Poh and Khadimallah, Mohamed Amine (2021) Failure mechanisms of structural bamboo using microstructural analyses. Advances in Materials Science and Engineering, 2021. ISSN 1687-8434, DOI https://doi.org/10.1155/2021/1571905.
Channa, Iftikhar Ahmed and Chandio, Ali Dad and Rizwan, Muhammad and Shah, Aqeel Ahmed and Bhatti, Jahanzeb and Shah, Abdul Karim and Hussain, Fayaz and Shar, Muhammad Ali and AlHazaa, Abdulaziz (2021) Solution processed PVB/mica flake coatings for the encapsulation of organic solar cells. Materials, 14 (10). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14102496.
Chong, Hue Yee and Tan, Shing Chiang and Yap, Hwa Jen (2021) Hybridization of harmonic search algorithm in training radial basis function with dynamic decay adjustment for condition monitoring. Soft Computing, 25 (15). pp. 10221-10235. ISSN 1432-7643, DOI https://doi.org/10.1007/s00500-021-05963-3.
Chu, Yung Jeh and Ganesan, Poo Balan and Ali, Mohamad Azlin (2021) Fluid-structure interaction simulation on flight performance of a dragonfly wing under different pterostigma weights. Journal of Mechanics, 37. pp. 216-229. ISSN 1727-7191, DOI https://doi.org/10.1093/jom/ufaa013.
Das, Likhan and Rubbi, Fazlay and Habib, Khairul and Aslfattahi, Navid and Saidur, R. and Saha, Bidyut Baran and Algarni, Salem and Irshad, Kashif and Alqahtani, Talal (2021) State-of-the-art ionic liquid & ionanofluids incorporated with advanced nanomaterials for solar energy applications. Journal of Molecular Liquids, 336. ISSN 0167-7322, DOI https://doi.org/10.1016/j.molliq.2021.116563.
Das, Likhan and Rubbi, Fazlay and Habib, Khairul and Saidur, R. and Islam, Nazrul and Saha, Bidyut Baran and Aslfattahi, Navid and Irshad, Kashif (2021) Hydrothermal performance improvement of an inserted double pipe heat exchanger with Ionanofluid. Case Studies in Thermal Engineering, 28. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2021.101533.
Esmaeilzadeh, A. and Nik Ghazali, Nik Nazri and Metselaar, Hendrik Simon Cornelis and Naghavi, M. S. and Azuddin, Mamat and Iranmanesh, S. (2021) Thermal performance evaluation of the heat pipe by using 1-pyrene carboxylic-acid functionalized graphene nanofluid. International Communications in Heat and Mass Transfer, 129. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2021.105669.
Fazal, M. A. and Sundus, F. and Masjuki, H. H. and Rubaiee, Saeed and Quazi, M. M. (2021) Tribological assessment of additive doped B30 biodiesel-diesel blend by using high frequency reciprocating rig test. Sustainable Energy Technologies and Assessments, 48. ISSN 2213-1388, DOI https://doi.org/10.1016/j.seta.2021.101577.
Gavhane, R. S. and Kate, A. M. and Soudagar, Manzoore Elahi M. and Wakchaure, V. D. and Balgude, Sagar and Rizwanul Fattah, I. M. and Nik-Ghazali, Nik-Nazri and Fayaz, H. and Khan, T. M. Yunus and Mujtaba, M. A. and Kumar, Ravinder and Shahabuddin, M. (2021) Influence of silica nano-additives on performance and emission characteristics of soybean biodiesel fuelled diesel engine. Energies, 14 (5). ISSN 1996-1073, DOI https://doi.org/10.3390/en14051489.
Goh, Kian Wei and Wong, Yew Hoong and Ramesh, S. and Chandran, Hari and Krishnasamy, S. and Ramesh, S. and Sidhu, Amritpal and Teng, W. D. (2021) Effect of pH on the properties of eggshell-derived hydroxyapatite bioceramic synthesized by wet chemical method assisted by microwave irradiation. Ceramics International, 47 (7, A). pp. 8879-8887. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2020.12.009.
Hamad, F. A. and Santim, C. G. S. and Faraji, F. and Al-Dulaimi, Mustafa J. and Ganesan, Poo Balan (2021) Experimental and numerical study of pressure drop in pipes packed with large particles. Heat and Mass Transfer, 57 (1). pp. 111-123. ISSN 0947-7411, DOI https://doi.org/10.1007/s00231-020-02944-4.
Hamza, Mukhtar Fatihu and Adamu, Jamilu Kamilu and Isa, Abdulbasid Ismail (2021) Euler-lagrange based dynamic model of double rotary inverted pendulum. Lecture Notes in Electrical Engineering, 666. pp. 419-434. ISSN 1876-1100, DOI https://doi.org/10.1007/978-981-15-5281-6_29.
Hamzah, N.A. and Abd Razak, Nasrul Anuar and Ab Karim, Mohd Sayuti and Salleh, S.Z. (2021) Comparative study on the accuracy of Biosculptor’s Bioscanner system in transtibial residual limb circumference measurement. Acta of Bioengineering and Biomechanics, 23 (4). pp. 173-182. ISSN 1509409X, DOI https://doi.org/10.37190/ABB-01905-2021-05.
Hasnul, Muhammad Harith and Mohd Zulkifli, Nurin Wahidah and Hassan, Masjuki and Zulkifli, Syahir Amzar and Mohd Yusoff, Mohd Nur Ashraf and Zakaria, Muhammad Zulfattah (2021) Synergistic behavior of graphene and ionic liquid as bio-based lubricant additive. Lubricants, 9 (5). ISSN 2075-4442, DOI https://doi.org/10.3390/lubricants9050046.
Hussein, N.A.A. and Hawari, H.F. and Wong, Yew Hoong and Haseeb, A.S.M.A. (2021) Preparation and sensing characterization of hybrid iron oxide/polyaniline/reduced graphene oxide at room temperature. International Journal of Chemical and Biochemical Sciences, 20. pp. 90-95. ISSN 22269614,
Ibrahim, Dauda Sh. and Beibei, Sun and Fatai, Sado and Oluseyi, Orelaja Adewale and Sharif, Umer (2021) Numerical and experimental study of a gauge-shaped beam for improved performance of piezoelectric energy harvester. Microsystem Technologies-Micro-and-Nanosystems-Information Storage and processing, 27 (12). pp. 4253-4268. ISSN 0946-7076, DOI https://doi.org/10.1007/s00542-021-05219-y.
Iranmanesh, Soudeh and Silakhori, Mahyar and Naghavi, Mohammad Sajad and Ang, Bee Chin and Ong, Hwai C. and Esmaeilzadeh, Alireza (2021) Using graphene nanoplatelets nanofluid in a closed-loop evacuated tube solar collector-energy and exergy analysis. Journal of Composites Science, 5 (10). ISSN 2504-477X, DOI https://doi.org/10.3390/jcs5100277.
Isa, Mohammad Syahid Mohd and Moghadasi, Kaveh and Ariffin, Mohammad Ashraf and Raja, Sufian and Muhamad, Mohd Ridha and Yusof, Farazila and Jamaludin, Mohd Fadzil and Yusoff, Nukman and Ab Karim, Mohd Sayuti (2021) Recent research progress in friction stir welding of aluminium and copper dissimilar joint: A review. Journal of Materials Research and Technology-JMR&T, 15. pp. 2735-2780. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2021.09.037.
Javadi, Farhood Sarrafzadeh and Saidur, Rahman (2021) Thermodynamic and energy efficiency analysis of a domestic refrigerator using Al2O3 nano-refrigerant. Sustainability, 13 (10). ISSN 2071-1050, DOI https://doi.org/10.3390/su13105659.
Jeevan, T. P. and Jayaram, S. R. and Afzal, Asif and Ashrith, H. S. and Soudagar, Manzoore Elahi M. and Mujtaba, M. A. (2021) Machinability of AA6061 aluminum alloy and AISI 304L stainless steel using nonedible vegetable oils applied as minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43 (3). ISSN 1678-5878, DOI https://doi.org/10.1007/s40430-021-02885-x.
Kallannavar, Vinayak and Kattimani, Subhaschandra and Soudagar, Manzoore Elahi M. and Mujtaba, M. A. and Alshahrani, Saad and Imran, Muhammad (2021) Neural network-based prediction model to investigate the influence of temperature and moisture on vibration characteristics of skew laminated composite sandwich plates. Materials, 14 (12). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14123170.
Kee, Chia Ching and Ang, Bee Chin and Metselaar, Hendrik Simon Cornelis (2021) Synthesis of europium-doped calcium silicate hydrate via hydrothermal and coprecipitation method. Ceramics International, 47 (4). pp. 4803-4812. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2020.10.050.
Khamil, Khairun Nisa and Mohd Sabri, Mohd Faizul and Md Yusop, Azdiana and Mohd Sa'at, Fatimah Al-Zahrah and Isa, Ahmad Nizam (2021) High coolingperformances of H-shape heat sink for thermoelectric energy harvesting system (TEHs) at asphalt pavement. International Journal of Energy Research, 45 (2). pp. 3242-3256. ISSN 0363-907X, DOI https://doi.org/10.1002/er.6021.
Khan, T. M. Yunus and Badruddin, Irfan Anjum and Soudagar, Manzoore Elahi M. and Khandal, Sanjeev and Kamangar, Sarfaraz and Mokashi, Imran and Mujtaba, M. A. and Hossain, Nazia (2021) Biodiesel production using modified direct transesterification by sequential use of acid-base catalysis and performance evaluation of diesel engine using various blends. Sustainability, 13 (17). ISSN 2071-1050, DOI https://doi.org/10.3390/su13179731.
Kherifi, D. and Belhouchet, H. and Ramesh, S. and Lee, K. Y. Sara and Kenzour, A. and Djoualah, S. and Abbas, M. K. G. and Wong, Yew Hoong and Ramesh, S. (2021) Sintering behaviour of fluorapatite-silicate composites produced from natural fluorapatite and quartz. Ceramics International, 47 (12). pp. 16483-16490. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2021.02.216.
Khodaii, Javad and Adibi, Hamed and Barazandeh, Farshad and Rezaei, Mehdi and Sarhan, Ahmed. A. D. (2021) Investigation of the surface integrity, flexural strength on the grinding of alumina for biomedical applications. Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology, 67. pp. 110-122. ISSN 0141-6359, DOI https://doi.org/10.1016/j.precisioneng.2020.09.019.
Kittur, M. and Andriyana, Andri and Ang, Bee Chin and Ch'ng, S. Y. and Mujtaba, M. A. (2021) Swelling of rubber in blends of diesel and cottonseed oil biodiesel. Polymer Testing, 96. ISSN 0142-9418, DOI https://doi.org/10.1016/j.polymertesting.2021.107116.
Kumar, P. C. Santhosh and Naveenkumar, R. and Sharifpur, Mohsen and Issakhov, Alibek and Ravichandran, M. and Mohanavel, V. and Aslfattahi, Navid and Afzal, Asif (2021) Experimental investigations to improve the electrical efficiency of photovoltaic modules using different convection mode. Sustainable Energy Technologies and Assessments, 48. ISSN 2213-1388, DOI https://doi.org/10.1016/j.seta.2021.101582.
Ladan, Magaji and Basirun, Wan Jeffrey and Kazi, Salim Newaz (2021) Polyaniline/graphene oxide/Zn-doped TiO2 nanocomposite coatings for the corrosion protection of carbon steel. Journal of Adhesion Science and Technology, 35 (22). pp. 2483-2505. ISSN 0169-4243, DOI https://doi.org/10.1080/01694243.2021.1892414.
Letchumanan, Devanthiran and Sok, Sophia P. M. and Ibrahim, Suriani and Nagoor, Noor Hasima and Arshad, Norhafiza Mohd (2021) Plant-based biosynthesis of copper/copper oxide nanoparticles: An update on their applications in biomedicine, mechanisms, and toxicity. Biomolecules, 11 (4). ISSN 2218-273X, DOI https://doi.org/10.3390/biom11040564.
Li, Hai and Yap, Hwa Jen and Khoo, Selina (2021) Motion classification and features recognition of a traditional Chinese sport (Baduanjin) using sampled-based methods. Applied Sciences, 11 (16). ISSN 2076-3417, DOI https://doi.org/10.3390/app11167630.
Liang, Lihua and Wen, Baohua and Xu, Feng and Yan, Jianwei and Yan, Xiangqi and Ramesh, S. (2021) Linking the development of building sustainability assessment tools with the concept evolution of sustainable buildings,. Sustainability, 13 (22). ISSN 2071-1050, DOI https://doi.org/10.3390/su132212909.
Lim, Kok-Sing and Zaini, Muhammad Khairol Annuar and Ong, Zhi-Chao and Abas, Fairul Zahri Mohamad and Salim, Muhammad Aizi Bin Mat and Ahmad, Harith (2021) Vibration mode analysis for a suspension bridge by using low-frequency cantilever-based FBG accelerometer array. IEEE Transactions on Instrumentation and Measurement, 70. ISSN 0018-9456, DOI https://doi.org/10.1109/TIM.2020.3018578.
Liu, Tao and Lv, Genbing and Mesbah, Mohsen and Nasiri-Tabrizi, Bahman and Wu, Shiqing (2021) Investigation on structural properties and bioactivity of nanosized biphasic calcium phosphate. Ceramics International, 47 (19). pp. 26720-26731. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2021.06.079.
Long, Su Xian and Khoo, Shin Yee and Ong, Zhi Chao and Soong, Ming Foong (2021) Stress enhancement of a trapezoidal bridge piezoelectric transducer in high force environment. Ferroelectrics, 573 (1). pp. 23-41. ISSN 0015-0193, DOI https://doi.org/10.1080/00150193.2021.1890461.
Ma, Yulin and Shahsavar, Amin and Moradi, Iman and Rostami, Sara and Moradikazerouni, Alireza and Yarmand, Hooman and Mohd Zulkifli, Nurin Wahidah (2021) Using finite volume method for simulating the natural convective heat transfer of nano-fluid flow inside an inclined enclosure with conductive walls in the presence of a constant temperature heat source. Physica A: Statistical Mechanics and its Applications, 580. ISSN 03784371, DOI https://doi.org/10.1016/j.physa.2019.123035.
Mahamude, Abu Shadate Faisal and Harun, Wan Sharuzi Wan and Kadirgama, Kumaran and Farhana, Kaniz and Ramasamy, D. and Samylingam, L. and Aslfattahi, Navid (2021) Thermal performance of nanomaterial in solar collector: State-of-play for graphene. Journal of Energy Storage, 42. ISSN 2352-152X, DOI https://doi.org/10.1016/j.est.2021.103022.
Masoud, Fathi and Sapuan, S. M. and Ariffin, Mohd Khairol Anuar Mohd and Nukman, Y. and Bayraktar, Emin (2021) Experimental analysis of kerf taper angle in cutting process of sugar palm fiber reinforced unsaturated polyester composites with laser beam and abrasive water jet cutting technologies. Polymers, 13 (15). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13152543.
Masoud, Fathi and Sapuan, S. M. and Ariffin, Mohd Khairol Anuar Mohd and Nukman, Yusoff and Bayraktar, Emin (2021) Experimental Analysis of Heat-Affected Zone (HAZ) in Laser Cutting of Sugar Palm Fiber Reinforced Unsaturated Polyester Composites. Polymers, 13 (5). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13050706.
Mazaheri, Hoora and Ong, Hwai Chyuan and Amini, Zeynab and Masjuki, Haji Hassan and Mofijur, M. and Su, Chia Hung and Anjum Badruddin, Irfan and Khan, T. M. Yunus (2021) An overview of biodiesel production via calcium oxide based catalysts: Current state and perspective. Energies, 14 (13). ISSN 1996-1073, DOI https://doi.org/10.3390/en14133950.
Mesbah, M. and Fadaeifard, F. and Nasiri-Tabrizi, B. and Matori, K. A. and Basirun, W. J. (2021) The impacts of grain boundary on the scattering of intermetallics in friction-stir-welded AA6061-T6. Materials Letters, 300. ISSN 0167-577X, DOI https://doi.org/10.1016/j.matlet.2021.130206.
Meyghani, B. and Awang, M. and Emamian, S. S. (2021) Introducing an enhanced friction model for developing inertia welding simulation: A computational solid mechanics approach. International Journal of Engineering, Transactions B: Applications, 34 (3). pp. 737-743. ISSN 1025-2495, DOI https://doi.org/10.5829/ije.2021.34.03c.19.
Mohamaddan, S. and Rahman, M. A. and Munot, M. Andrew and Tanjong, S. J. and Deros, B. M. and Md. Dawal, Siti Zawiah and Case, K. (2021) Investigation of oil palm harvesting tools design and technique on work-related musculoskeletal disorders of the upper body. International Journal of Industrial Ergonomics, 86. ISSN 0169-8141, DOI https://doi.org/10.1016/j.ergon.2021.103226.
Mohd Zahri, N. A. and Sahira Shafee, N. E. and Yusof, F. and Nurmaya Musa, S. and Liana Sukiman, N. and Haseeb, A. S. M. A. and Miyashita, Y. and Ariga, T. (2021) Interfacial microstructure and strength of brazed copper/porous copper foam towards the effect of porous copper foam pore density and brazing holding timeEinfluss von Porendichte des Kupferschaums und Lothaltezeit auf das Grenzflachengefuge und die Festigkeit von Kupfer-Kupferschaum-Lotverbindungen. Materialwissenschaft und Werkstofftechnik, 52 (6). pp. 655-663. ISSN 0933-5137, DOI https://doi.org/10.1002/mawe.202000059.
Mujtaba, M. A. and Kalam, Md Abul and Masjuki, Haji Hassan and Soudagar, Manzoore Elahi M. and Khan, Haris Mehmood and Fayaz, H. and Farooq, M. and Gul, M. and Ahmed, Waqar and Ahmad, Mushtaq and Munir, Mamoona and Yaqoob, Haseeb and Samuel, Olusegun D. and Razzaq, Luqman (2021) Effect of palm-sesame biodiesel fuels with alcoholic and nanoparticle additives on tribological characteristics of lubricating oil by four ball tribo-tester. Alexandria Engineering Journal, 60 (5). pp. 4537-4546. ISSN 1110-0168, DOI https://doi.org/10.1016/j.aej.2021.03.017.
Mujtaba, M. A. and Kalam, Md. Abul and Masjuki, H. H. and Razzaq, Luqman and Khan, Haris Mehmood and Soudagar, Manzoore Elahi M. and Gul, M. and Ahmed, Waqar and Raju, V. Dhana and Kumar, Ravinder and Ong, Hwai Chyuan (2021) Development of empirical correlations for density and viscosity estimation of ternary biodiesel blends. Renewable Energy, 179. pp. 1447-1457. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2021.07.121.
Nagaraja, Santhosh and Kodandappa, Ramesha and Ansari, Khalid and Kuruniyan, Mohamed Saheer and Afzal, Asif and Kaladgi, Abdul Razak and Aslfattahi, Navid and Saleel, C. Ahamed and Gowda, Ashwin C. and Bindiganavile Anand, Praveena (2021) Influence of heat treatment and reinforcements on tensile characteristics of aluminium AA 5083/silicon carbide/fly ash composites. Materials, 14 (18). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14185261.
Naghavi Sanjani, Mohammad Sajjad and Esmaeilzadeh, A. and Singh, B. and Ang, B. C. and Yoon, T. M. and Ong, K. S. (2021) Experimental and numerical assessments of underlying natural air movement on PV modules temperature. Solar Energy, 216. pp. 610-622. ISSN 0038-092X, DOI https://doi.org/10.1016/j.solener.2021.01.007.
Nik Ibrahim, Nik Muhd Jazli and Mohd Said, Suhana and Mainal, Azizah and Mohd Sabri, Mohd Faizul and Abdullah, Noorlidah and Hasnan, M. M. I. Megat and Mohd Amin, Mohd and Mohd Salleh, Mohd Faiz (2021) Investigation of iron(III) ionic structural complexes for seebeck coefficient enhancement using variation of ligand lengths with extended Pi-conjugated bipyridyl ligands. Journal of Molecular Structure, 1237. ISSN 0022-2860, DOI https://doi.org/10.1016/j.molstruc.2021.130202.
Parveez, Bisma and Jamal, Nur Ayuni and Maleque, Abdul and Yusof, Farazila and Jamadon, Nashrah Hani and Adzila, Sharifah (2021) Review on advances in porous Al composites and the possible way forward. Journal of Materials Research and Technology-JMR&T, 14. pp. 2017-2038. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2021.07.055.
Rafieerad, M. and Rafieerad, A. R. and Mehmandoust, Babak and Dhingra, S. and Shanbedi, M. (2021) New water-based fluorescent nanofluid containing 2D titanium carbide MXene sheets: A comparative study of its thermophysical, electrical and optical properties with amine and carboxyl covalently functionalized graphene nanoplatelets. Journal of Thermal Analysis and Calorimetry, 146 (4). pp. 1491-1504. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-020-10088-0.
Rubbi, Fazlay and Das, Likhan and Habib, Khairul and Aslfattahi, Navid and Saidur, R. and Ul Alam, Sanney (2021) A comprehensive review on advances of oil-based nanofluids for concentrating solar thermal collector application. Journal of Molecular Liquids, 338. ISSN 0167-7322, DOI https://doi.org/10.1016/j.molliq.2021.116771.
Saeed, Muhammad Azam and Farooq, Muhammad and Anwar, Aneela and Abbas, Muhammad Mujtaba and Soudagar, Manzoore Elahi M. and Siddiqui, Farrukh A. and Shakir, Muhammad Ali and Nizami, Abdul-Sattar and Chaudhry, Ijaz Ahmad and Pettinau, Alberto and Andrews, Gordon E. and Phylaktou, Herodotos N. (2021) Flame propagation and burning characteristics of pulverized biomass for sustainable biofuel. Biomass Conversion and Biorefinery, 11 (2, SI). pp. 409-417. ISSN 2190-6815, DOI https://doi.org/10.1007/s13399-020-00875-y.
SalehHudin, Hanna S. and Mohamad, Edzrol Niza and Wan Mahadi, Wan Nor Liza and Muhammad Afifi, Amalina (2021) Simulation and experimental study of parameters in multiple-nozzle electrospinning: Effects of nozzle arrangement on jet paths and fiber formation. Journal of Manufacturing Processes, 62. pp. 440-449. ISSN 1526-6125, DOI https://doi.org/10.1016/j.jmapro.2020.12.024.
Salem, Ayman M. H. and Ali, Abdelrahman and Muthalif, Asan G. A. and Bin Ramli, Rahizar and Julai, Sabariah (2021) Magnetorheological elastomer based flexible metamaterials coupler for broadband longitudinal vibration isolation: Modeling and experimental verification. IEEE Access, 9. pp. 165451-165461. ISSN 2169-3536, DOI https://doi.org/10.1109/ACCESS.2021.3134267.
Sekaran, Sivadas Chandra and Yap, Hwa Jen and Musa, Siti Nurmaya and Liew, Kan Ern and Tan, Chee Hau and Aman, Atikah (2021) The implementation of virtual reality in digital factory-a comprehensive review. The International Journal of Advanced Manufacturing Technology, 115 (5-6). pp. 1349-1366. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-021-07240-x.
Selvarajoo, Suman and Raja Ghazilla, Raja Ariffin and Mamat, Azuddin (2021) Industrial practices of collaborative manufacturing involving tool and die development: Malaysian perspective. Journal of Manufacturing Technology Management, 32 (2). pp. 485-505. ISSN 1741-038X, DOI https://doi.org/10.1108/JMTM-07-2019-0266.
Shah, Syed Nadeem Abbas and Shahabuddin, Syed and Sabri, Mohd Faizul Mohd and Salleh, Mohd Faiz Mohd and Said, Suhana Mohd and Khedher, Khaled Mohamed (2021) Thermal conductivity, rheology and stability analysis of2Dtungsten disulphide-doped polyaniline-based nanofluids: An experimental investigation. International Journal of Energy Research, 45 (2). pp. 1550-1575. ISSN 0363-907X, DOI https://doi.org/10.1002/er.5697.
Shahabuddin, M. and Mofijur, M. and Shuvho, Md. Bengir Ahmed and Chowdhury, M. A. K. and Kalam, M. A. and Masjuki, Haji Hassan and Chowdhury, M. A. (2021) A study on the corrosion characteristics of internal combustion engine materials in second-generation jatropha curcas biodiesel. Energies, 14 (14). ISSN 1996-1073, DOI https://doi.org/10.3390/en14144352.
Shahapurkar, Kiran and Chenrayan, Venkatesh and Tesfamarium, Belay Brehane and Soudagar, Manzoore Elahi M. and Hossain, Nazia and A. Rajhi, Ali and Alamri, Sagr and Alarifi, Ibrahim M. and Shahapurkar, Pavan and Mujtaba, M. A. and Kiran, M. C. and Sayeed Ahmed, Gulam Mohammed (2021) Parametric analysis of epoxy/crumb rubber composite by using taguchi-GRA hybrid technique. Polymers, 13 (19). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13193441.
Sharath, Ballupete Nagaraju and Venkatesh, Channarayapattana Venkataramaiah and Afzal, Asif and Aslfattahi, Navid and Aabid, Abdul and Baig, Muneer and Saleh, Bahaa (2021) Multi ceramic particles inclusion in the aluminium matrix and wear characterization through experimental and response surface-artificial neural networks. Materials, 14 (11). ISSN EISSN 1996-1944, DOI https://doi.org/10.3390/ma14112895.
Soo, Yew Hang and Ng, Soo Ai and Wong, Yew Hoong and Ng, Chai Yan (2021) Thermal stability enhancement of perovskite MAPbI(3) film at high temperature (150 degrees C) by PMMA encapsulation. Journal of Materials Science-Materials in Electronics, 32 (11). pp. 14885-14900. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-021-06041-y.
Soong, Ming Foong and Ramli, Rahizar and Abdullah, Ahmad Saifizul and Mamat, Azuddin (2021) Handling performance criteria evaluation for vehicle suspension system with semi-Active control strategies. International Journal of Advanced Mechatronic Systems, 9 (1). pp. 11-20. ISSN 1756-8412,
Sutharsini, U. and Thanihaichelvan, M. and Ramesh, S. and Ng, C. K. (2021) Surface yttria content and hydrothermal ageing behaviour of two step sintered 3Y-TZP ceramics. Journal of the National Science Foundation of Sri Lanka, 49 (2). pp. 219-225. ISSN 1391-4588, DOI https://doi.org/10.4038/jnsfsr.v49i2.10029.
Taib, M.M. and Ibrahim, S. and Rozali, Shaifulazuar (2021) Structural and Electrical Properties of Graphene Oxide/Nickel Oxide Based Polymer Nanocomposite. Lecture Notes in Mechanical Engineering, 46. pp. 981-990. ISSN 21954356, DOI https://doi.org/10.1007/978-981-15-9505-9_86.
Talip, Norhashidah and Muhammad Afifi, Amalina and Hamzah, Mohd Yusof and Mahmud, Maznah and Idris, Sarada (2021) Radiation modified CS/PVA Film with PVP coating as cu adsorbent material. Pertanika Journal of Science and Technology, 29 (2). pp. 1119-1134. ISSN 0128-7680, DOI https://doi.org/10.47836/pjst.29.2.23.
Tan, Chin Joo and Liew, Haw Ling (2021) Investigation of coil-break formation during uncoiling of fully annealed low carbon steel sheet using FE simulation. Engineering Failure Analysis, 120. ISSN 1350-6307, DOI https://doi.org/10.1016/j.engfailanal.2020.105112.
Tan, K. H. and Samylingam, L. and Aslfattahi, Navid and Saidur, R. and Kadirgama, K. (2021) Optical and conductivity studies of polyvinyl alcohol-MXene (PVA-MXene) nanocomposite thin films for electronic applications. Optics & Laser Technology, 136. ISSN 0030-3992, DOI https://doi.org/10.1016/j.optlastec.2020.106772.
Tan, Shiou Xuan and Andriyana, Andri and Lim, Steven and Ong, Hwai Chyuan and Pang, Yean Ling and Ngoh, Gek Cheng (2021) Rapid Ultrasound-Assisted Starch Extraction from Sago Pith Waste (SPW) for the Fabrication of Sustainable Bioplastic Film. Polymers, 13 (24). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13244398.
Teh, S. and Andriyana, Andri and Ramesh, S. and Putra, I.S. and Kadarno, P. and Purbolaksono, J. (2021) Tetrahedral meshing for a slanted semi-elliptical surface crack at a solid cylinder. Engineering Fracture Mechanics, 241. ISSN 00137944, DOI https://doi.org/10.1016/j.engfracmech.2020.107400.
Tong, Dylan Jia Yee and Koay, Seong Chun and Chan, Ming Yeng and Tshai, Kim Yeow and Ong, Thai Kiat and Buys, Yose Fachmi (2021) Conductive polymer composites made from polypropylene and recycled graphite scrap. Journal of Physical Science, 32 (3). pp. 31-44. ISSN 1675-3402, DOI https://doi.org/10.21315/jps2021.32.3.3.
Tripathi, Manoj and Bhatnagar, Ashish and Pandey, Krishna Kumar and Ganesan, P. (2021) Synthesis, characterization and performance study of biomass derived supercapacitor electrode. Journal of The Electrochemical Society, 168 (5). ISSN 0013-4651, DOI https://doi.org/10.1149/1945-7111/abff62.
Usman, Muhammad and Hussain, Haris and Riaz, Fahid and Irshad, Muneeb and Bashir, Rehmat and Haris Shah, Muhammad and Ahmad Zafar, Adeel and Bashir, Usman and Kalam, Md. Abul and Mujtaba, M. A. and M. Soudagar, Manzoore Elahi (2021) Artificial neural network led optimization of oxyhydrogen hybridized diesel operated engine. Sustainability, 13 (16). ISSN 2071-1050, DOI https://doi.org/10.3390/su13169373.
Viannie, Leema Rose and Banapurmath, N. R. and Soudagar, Manzoore Elahi M. and Nandi, Anilkumar and Hossain, Nazia and Shellikeri, Ashwini and Kaulgud, Vinita and Mujtaba, Ma and Khan, Sher Afghan and Asif, Mohammad (2021) Electrical and mechanical properties of flexible multiwalled carbon nanotube/poly (dimethylsiloxane) based nanocomposite sheets. Journal of Environmental Chemical Engineering, 9 (6). ISSN 2213-2929, DOI https://doi.org/10.1016/j.jece.2021.106550.
Wang, Chin-Tsan and Zhang, Fu-Sen and Ong, Raymond Tang Chong and Chong, Wen Tong and Ruan, Zhong-Xin (2021) Power performance of phragmites Australis and Egeria densa Plant Microbial Fuel Cells in Wetlands under natural condition. Journal of the Chinese Society of Mechanical Engineers, 42 (5). pp. 521-528. ISSN 0257-9731,
Wategave, S. P. and Banapurmath, N. R. and Sawant, M. S. and Soudagar, Manzoore Elahi M. and Mujtaba, M. A. and Afzal, Asif and Basha, J. Sadhik and Alazwari, Mashhour A. and Safaei, Mohammad Reza and Elfasakhany, Ashraf and Sajjan, A. M. (2021) Clean combustion and emissions strategy using reactivity controlled compression ignition (RCCI) mode engine powered with CNG-Karanja biodiesel. Journal of the Taiwan Institute of Chemical Engineers, 124. pp. 116-131. ISSN 1876-1070, DOI https://doi.org/10.1016/j.jtice.2021.04.055.
Wong, Kang Yao and Ng, Jo-Han and Chong, Cheng Tung and Lam, Su Shiung and Chong, Wen Tong (2021) Pareto-hierarchical clustering framework for biodiesel transesterification. Sustainable Energy Technologies and Assessments, 45. ISSN 2213-1388, DOI https://doi.org/10.1016/j.seta.2021.101160.
Wong, Sok Kuan and Wong, Yew Hoong and Chin, Kok-Yong and Ima-Nirwana, Soelaiman (2021) A review on the enhancement of calcium phosphate cement with biological materials in bone defect healing. Polymers, 13 (18). ISSN 2073-4360, DOI https://doi.org/10.3390/polym13183075.
Wong, Yew Hoong and Lei, Zhen Ce and Abidin, Nor Ishida Zainal (2021) Surface and interface characteristics of annealed ZrO2/Ge oxide-semiconductor structure in argon ambient. Surfaces and Interfaces, 23. ISSN 2468-0230, DOI https://doi.org/10.1016/j.surfin.2021.101007.
Yang, Jianlei and Ching, Yern Chee and Chuah, Cheng Hock and Hai, Nguyen Dai and Singh, Ramesh and Nor, Abidi Rahima Md (2021) Preparation and characterization of starch-based bioplastic composites with treated oil palm empty fruit bunch fibers and citric acid. Cellulose, 28 (7). pp. 4191-4210. ISSN 0969-0239, DOI https://doi.org/10.1007/s10570-021-03816-8.
Yu, Kai Ling and Lee, Xin Jiat and Ong, Hwai Chyuan and Chen, Wei-Hsin and Chang, Jo-Shu and Lin, Chih-Sheng and Show, Pau Loke and Ling, Tau Chuan (2021) Adsorptive removal of cationic methylene blue and anionic Congo red dyes using wet-torrefied microalgal biochar: Equilibrium, kinetic and mechanism modeling. Environmental Pollution, 272. ISSN 0269-7491, DOI https://doi.org/10.1016/j.envpol.2020.115986.
Zamiri, Golnoush and Bagheri, Samira and Babadi, Arman Amani and Moosavi, Seyedehmaryam and Naghavi, M. S. (2021) The impact of immerssion time and thickness of TiO2 photoanode on power conversion efficiency of dye-sensitised solar cells using graphene quantum dots as photosensitiser. Optical Materials, 122 (B). ISSN 0925-3467, DOI https://doi.org/10.1016/j.optmat.2021.111720.
Zamiri, Golnoush and Haseeb, A. S. M. A. and Krishnan, Syam G. and Numan, Arshid and Jagadish, Priyanka and Khalid, Mohammad (2021) Ternary nanocomposite cathodes based on 3D graphene-Ag nanoparticle-polyaniline for hybrid electrochemical energy device. Synthetic Metals, 282. ISSN 0379-6779, DOI https://doi.org/10.1016/j.synthmet.2021.116932.
Zulfattah, Z. M. and Mohd Zulkifli, Nurin Wahidah and Haji Hassan, Masjuki and Harith, M. H. and Syahir, A. Z. and Norain, I and Mohd Yusoff, Mohd Nur Ashraf and Jamshaid, M. and Arslan, A. (2021) Wear performance of oleate-based esters with two-, three-, and four-branched molecular structure in pure form and mixture. Journal of Tribology, 143 (1). ISSN 0742-4787, DOI https://doi.org/10.1115/1.4047584.
Eid, Mohamed Moustafa Abdelhalim Ahmed and Mohd Zubir, Mohd Nashrul and Muhamad, Mohd Ridha Bin and Newaz, Kazi Md. Salim (2021) Computer aided investigation on the effect of internal surface micro grooving for enhanced thermal management of heat exchanger. In: 11th International Conference on Thermofluids 2020, THERMOFLUID 2020, 10 - 11 November 2020, Yogyakarta.
Mohd Joharudin, Nurul Farahin and Mustapa, Mohammad Sukri and Supawi, Aiman and Abdul Latif, Noradila and Wan Hussin, Wan Nasrul Nizam and Alias, Mohd Fairuz and Kamarudin, Kamarul-Azhar and Ariffin, Ahmad Hamdan and Yusof, Farazila (2021) The effect of UV irradiation on tensile strength of polypropylene reinforced kenaf fiber and peat soil. In: 2021 International Conference on Electron Devices and Applications, ICEDA 2021, 14-16 August 2021, Nanjing, Virtual.
Muhammad, Aisha and Ali, Mohammed A. H. and Shanono, Ibrahim Haruna (2021) A novel algorithm for mobile robot path planning. In: 11th IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2021, 3 - 4 April 2021, Penang.
Muhammad, Aisha and Ali, Mohammed A. H. and Shanono, Ibrahim Haruna (2021) A review: On intelligent mobile robot path planning techniques. In: 11th IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2021, 3 - 4 April 2021, Penang.
Nair, Sayshar Ram and Oon, Chean Sean and Tan, Ming Kwang and Kazi, Salim Newaz (2021) Investigation of heat transfer enhancement in an annular conduit with angled fins using functionalized GNP colloidal suspension. In: 4th International Symposium on Green and Sustainable Technology, ISGST 2021, 3 - 6 October 2021, Kampar.
Natasha, A.N. and Ramesh, S. and Tan, C.Y. and Bang, L.T. (2021) Sinterability of calcium phosphate through rapid sintering. In: International Laser Technology and Optics Symposium in Conjunction with Photonics Meeting 2020, ILATOSPM 2020, 22-23 October 2020, Johor.
Nordin, N.M. and Anuar, H. and Ali, F. and Buys, Y.F. (2021) Tensile properties of PolyLactic Acid Composite Foamed via Supercritical Carbon Dioxide. In: Journal of Physics: Conference Series, 14-15 July 2024, Perlis, Virtual.
Ong, K.S. and Gobi, K. and Lim, C.H. and Naghavi, S. and Baljit, S. (2021) Thermal resistance model of a flat plate solar air collector for energy efficiency prediction. In: IOP Conference Series: Earth and Environmental Science, 3-6 October 2021, Kampar.
Ong, K.S. and Lim, C.H. and Munusamy, Y. and Choo, K.C. and Chai, G.J. and Saii, Patmashini and Naghavi, S. (2021) Efficient thermal energy management of hollow pin fin heat sinks with and without phase change material. In: 4th International Symposium on Green and Sustainable Technology, ISGST 2021, 3 - 6 October 2021, Kampar.
Ong, Kok Seng and Kanadasan, Gobi and Lim, Chong Hooi and Tan, J.C. and Naghavi, Mohammad Sajad and Bathal Singh, Baljit Singh and Wong, S.Y. (2021) Experimental investigation on effect of inclination angle of a flat plate solar air collector. In: 4th International Symposium on Green and Sustainable Technology, ISGST 2021, 3 - 6 October 2021, Kampar.
Wakeel, Saif and Meng, Dominic Koey Poh and Chin, Stella Wong Wun and Philipsen, Jos and Gommers, Pieter and Joosten, Annelies (2021) Effect of plasma and staging time on the underfill voids in fine pitch flip-chip package. In: 22nd International Conference on Electronic Packaging Technology, ICEPT 2021, 14 - 17 September 2021, Xiamen.
