Items where Division is "Faculty of Engineering" and Year is 2005

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 49.

Ahmad, A. and Izyani, M.A.M. and Zamzuri, A.K. and Adikan, Faisal Rafiq Mahamd and Sheih, S.J. and Mahdi, M.A. (2005) Experimental validation of OSNR enhancement utilizing hybrid Raman/Erbium fiber amplifiers. Microwave and Optical Technology Letters, 45 (4). pp. 333-335. ISSN 0895-2477,

Ahmad, Harith and Saat, Nor Kamilah and Harun, Sulaiman Wadi (2005) Effect of doped-fiber's spooling on performance of S-band EDFA. Laser Physics Letters, 2 (8). pp. 412-414. ISSN 1612-2011, DOI https://doi.org/10.1002/lapl.200510016.

Ahmad, Harith and Saat, Nor Kamilah and Harun, Sulaiman Wadi (2005) S-band erbium-doped fiber ring laser using a fiber Bragg grating. Laser Physics Letters, 2 (7). pp. 369-371. ISSN 1612-2011, DOI https://doi.org/10.1002/lapl.200510009.

Ahmad, Harith and San, Cheng Xiau and Harun, Sulaiman Wadi (2005) An enhanced S-band brillouin/erbium fiber laser with an additional EDFA in sub-loop. IEICE Electronics Express, 2 (10). pp. 321-326. ISSN 1349-2543, DOI https://doi.org/10.1587/elex.2.321.

Ahmed, Shamsuddin and Masjuki, Haji Hassan and Taha, Zahari (2005) TPM can go beyond maintenance: excerpt from a case implementation. Journal of Quality in Maintenance Engineering, 11 (1). pp. 19-42. ISSN 1355-2511, DOI https://doi.org/10.1108/13552510510589352.

Al-Mansoori, M.H. and Abd-Rahman, M.K. and Adikan, Faisal Rafiq Mahamd and Mahdi, M.A. (2005) Widely tunable linear cavity multiwavelength Brillouin-Erbium fiber lasers. Optics Express, 13 (9). pp. 3471-3476. ISSN 1094-4087,

Al-Mansoori, Mohammed Hayder and Abidin, Mohd Shahnan Zainal and Naji, Ahmed Wathik and Kadir, Muhammad Zamzuri Abdul and Adikan, Faisal Rafiq Mahamd and Mahdi, Mohd Adzir (2005) 35-channel multiwavelength brillouin-erbium fiber laser utilizing fiber loop mirrors. Japanese Journal of Applied Physics, 44 (1-7). L190-L192. ISSN 0021-4922, DOI https://doi.org/10.1143/JJAP.44.L190.

Aslam, M.U. and Masjuki, Haji Hassan and Kalam, M.A. and Abdesselam, H. and Varman, M. and Mahlia, T.M.I. and Amalina, M.A. (2005) The performance of a spark-ignition engine fuelled with natural gas and gasoline. In: ATCi 2005, Conference on Automotive Technology, Dec 6-8, 2005, Putrajaya, Malaysia.

Azwar, - and Hussain, Mohd Azlan and Ramachandran, K.B. (2005) Modeling and dynamic simulation of activated sludge process in sequencing batch reactor. Developments in Chemical Engineering and Mineral Processing, 13 (5-6). pp. 675-686. ISSN 0969-1855, DOI https://doi.org/10.1002/apj.5500130517.

Basha, E.A. and Hashim, Roslan and Mahmud, H.B. and Muntohar, A.S. (2005) Stabilization of residual soil with rice husk ash and cement. Construction and Building Materials, 19 (6). pp. 448-453. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2004.08.001.

Benamor, A. and Aroua, Mohamed Kheireddine (2005) Modeling of CO2 solubility and carbamate concentration in DEA, MDEA and their mixtures using the Deshmukh-Mather model. Fluid Phase Equilibria, 231 (2). pp. 150-162. ISSN 0378-3812, DOI https://doi.org/10.1016/j.fluid.2005.02.005.

Daosud, Wachira and Thitiyasook, Piyanuch and Arpornwichanop, Amornchai and Kittisupakorn, Paisan and Hussain, Mohd Azlan (2005) Neural network inverse model-based controller for the control of a steel pickling process. Computers & Chemical Engineering, 29 (10). pp. 2110-2119. ISSN 0098-1354, DOI https://doi.org/10.1016/j.compchemeng.2005.06.007.

Ghasem, N.M. and Sulaiman, M.Z. and Hussain, Mohd Azlan (2005) Simulation, optimization and parametric studies of a solid catalyzed gas phase ethylene polymerization fluidized bed reactor. Journal of Chemical Engineering of Japan, 38 (3). pp. 171-175. ISSN 0021-9592, DOI https://doi.org/10.1252/Jcej.38.171.

Gupta, B.S. and Chandrasekaran, S. and Ibrahim, S. (2005) Technologies for sewer rehabilitation in Malaysia. Trenchless Australasia, 3. pp. 19-21. ISSN 1832-0562,

Harun, Sulaiman Wadi and Ahmad, Harith (2005) Gain Improvement in Two-stage L-Band EDFA with Incorporation of Fiber Bragg Grating. Journal of Optical Communications, 26 (5). pp. 198-200. ISSN 0173-4911, DOI https://doi.org/10.1515/JOC.2005.26.5.198.

Harun, Sulaiman Wadi and Ahmad, Harith and Cheng, Xiau San and Saat, Nor Kamilah (2005) S-band Brillouin erbium fibre laser. Electronics Letters, 41 (4). pp. 174-176. ISSN 0013-5194, DOI https://doi.org/10.1049/el:20057310.

Harun, Sulaiman Wadi and Saat, Nor Kamilah and Ahmad, Harith (2005) Effect of a midway isolator on the performance of two-stage S-band EDFA. Laser Physics, 15 (8). pp. 1204-1206. ISSN 1054-660X,

Harun, Sulaiman Wadi and Saat, Nor Kamilah and Ahmad, Harith (2005) A Partial Double-Pass S-Band Erbium-Doped Fibre Amplifier. Chinese Physics Letters, 22 (12). pp. 3080-3082. ISSN 0256-307X, DOI https://doi.org/10.1088/0256-307X/22/12/027.

Harun, Sulaiman Wadi and Saat, Nor Kamilah and Ahmad, Harith (2005) Two-stage S-band erbium-doped fiber amplifier using a depressed-cladding fiber. Microwave and Optical Technology Letters, 46 (1). pp. 92-94. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.20910.

Harun, Sulaiman Wadi and Samsuri, Norhakimah Md and Ahmad, Harith (2005) Gain enhancement in partial double-pass L-band EDFA system using a band-pass filter. Laser Physics Letters, 2 (1). pp. 36-38. ISSN 1612-2011, DOI https://doi.org/10.1002/lapl.200410130.

Harunsyah, - and Sulaiman, Nik Meriam Nik and Aroua, Mohamed Kheireddine (2005) Treatment of skim latex serum using gas sparged ultrafiltration. Developments in Chemical Engineering and Mineral Processing, 13 (5-6). pp. 667-674. ISSN 0969-1855, DOI https://doi.org/10.1002/apj.5500130516.

Hassan, M.A. and Suenaga, R. and Takakura, N. and Yamaguchi, K. (2005) A novel process on friction aided deep drawing using tapered blank holder divided into four segments. Journal of Materials Processing Technology, 159 (3). pp. 418-425. ISSN 0924-0136,

Ibrahim, F. and Taib, M.N. and Wan Abas, W.A.B. and Guan, C.C. and Sulaiman, S. (2005) A novel approach to classify risk in dengue hemorrhagic fever (DHF) using bioelectrical impedance analysis (BIA). IEEE Transactions on Instrumentation and Measurement, 54 (1). pp. 237-244. ISSN 0018-9456, DOI https://doi.org/10.1109/Tim.2004.840237.

Ibrahim, F. and Taib, M.N. and Wan Abas, W.A.B. and Guan, C.C. and Sulaiman, S. (2005) A novel dengue fever (DF) and dengue haemorrhagic fever (DHF) analysis using artificial neural network (ANN). Computer Methods and Programs in Biomedicine, 79 (3). pp. 273-281. ISSN 01692607, DOI https://doi.org/10.1016/j.cmpb.2005.04.002.

Ibrahim, F. and Tiong, C.K. and Ismail, N.A. and Taib, M.N. (2005) Analysis of mass distribution in dengue patients using bioelectrical impedance. In: 2005 Asian Conference on Sensors and the International Conference on new Techniques in Pharmaceutical and Biomedical Research, 2005, Kuala Lumpur.

Ibrahim, Fatimah and Ooi, K.F. and Ismail, N.A. and Taib, M.N. and Wan Abas, Wan Abu Bakar (2005) Analysis of water compartment in dengue patients. In: 2005 27th Annual International Conference of the Engineering in Medicine and Biology Society, IEEE-EMBS 2005, 2005, Shanghai.

Jang, Min and Hong, S.M. and Park, J.K. (2005) Characterization and recovery of mercury from spent fluorescent lamps. Waste Management, 25 (1). pp. 5-14. ISSN 0956-053X, DOI https://doi.org/10.1016/j.wasman.2004.09.008.

Jang, Min and Jung, S.H. and Sang, I.C. and Jae, K.P. (2005) Remediation of arsenic-contaminated soils and washing effluents. Chemosphere, 60 (3). pp. 344-354. ISSN 0045-6535, DOI https://doi.org/10.1016/j.chemosphere.2004.12.018.

Khairi, K.A. and Adikan, Faisal Rafiq Mahamd and Naji, A.W. and Al-Mansoori, M.H. and Mahdi, M.A. (2005) Experimental Investigation of pump propagating direction in double-pass Er3+-doped fiber amplifiers. IEICE Electronics Express, 2 (18). pp. 477-481. ISSN 1349-2543,

Lee, Ang Wee and Ghasem, Nayef Mohamed and Hussain, Mohd Azlan (2005) Utilization of mathematical software packages in chemical engineering research. ASEAN Journal of Chemical Engineering, 5 (2). pp. 125-129. ISSN 2655-5409,

Li, L. and Kim, J.H. and Shukor, M.H.A. (2005) Grit blast assisted laser milling/grooving of metallic alloys. CIRP Annals-Manufacturing Technology, 54 (1). pp. 183-186. ISSN 0007-8506,

Mahlia, T.M.I. and Masjuki, Haji Hassan and Taha, F.M. and Rahim, N.A. and Saidur, Rahman (2005) Energy labeling for electric fans in Malaysia. Energy Policy, 33 (1). pp. 63-68. ISSN 0301-4215, DOI https://doi.org/10.1016/s0301-4215(03)00198-8.

Moghavvemi, M. and Ng, K.E. and Soo, C.Y. and Tan, S.Y. (2005) A reliable and economically feasible remote sensing system for temperature and relative humidity measurement. Sensors and Actuators A: Physical, 117 (2). pp. 181-185. ISSN 0924-4247, DOI https://doi.org/10.1016/j.sna.2004.04.058.

Moghavvemi, M. and Tan, S.Y. and Wong, S.K. (2005) A reliable and economically feasible automatic meter reading system using power line distribution network. International Journal of Engineering, Transactions B: Applications, 18 (3). pp. 301-318. ISSN 10252495,

Mohktar, M.S. and Ibrahim, F. and Ismail, N.A. (2005) Bioelectrical impedance analysis in assessing the chances of obtaining coronary heart disease in obese subjects. In: 2005 Asian Conference on Sensors and the International Conference on new Techniques in Pharmaceutical and Biomedical Research, 2005, Kuala Lumpur.

Muhammad, K.S. and Omar, A.M. and Mekhilef, Saad (2005) Single-phase single-stage high DC voltage multiplier converter. In: 2005 IEEE International Conference on Industrial Technology, ICIT 2005, Hong Kong.

Mukhtar, S.R. and Shanmugam, S.A. and Ibrahim, F. (2005) Development of a control system for laser doppler imaging scanning technique using labview. In: 2005 1st International Conference on Computers, Communications and Signal Processing with Special Track on Biomedical Engineering, CCSP 2005, 2005, Kuala Lumpur.

Nasir, N.F.M. and Zain, N.M. and Raha, M.G. and Kadri, Nahrizul Adib (2005) Characterization of chitosan-poly (ethylene oxide) blends as haemodialysis membrane. American Journal of Applied Sciences, 2 (12). pp. 1578-1583.

Nor, K.M. and Mokhlis, Hazlie and Suyono, H. and Abdel-Akher, M. and Rashid, A.H.A. and Gani, T.A. (2005) Development of power system analysis software using object components. In: TENCON 2005 2005 IEEE Region 10, 2005.

Rahim, N.A. and Mekhilef, Saad and Zahrul, I. (2005) Design and implementation of single-phase hybrid active power filter controller. In: Sixth International Conference on Power Electronics and Drive Systems, PEDS 2005, Kualu Lumpur.

Rahim, N.A. and Mekhilef, Saad and Zahrul, I. (2005) A single-phase active power filter for harmonic compensation. In: 2005 IEEE International Conference on Industrial Technology, ICIT 2005, Hong Kong.

Razak, H.A. and Ferdiansyah, T. (2005) Toughness characteristics of Arenga pinnata fibre concrete. Journal of Natural Fibers, 2 (2). pp. 89-103. ISSN 1544-0478, DOI https://doi.org/10.1300/J395v02n02_06.

Razak, H.A. and Wong, H.S. (2005) Strength estimation model for high-strength concrete incorporating metakaolin and silica fume. Cement and Concrete Research, 35 (4). pp. 688-695. ISSN 0008-8846, DOI https://doi.org/10.1016/j.cemconres.2004.05.040.

Razali, R. and Abu Osman, Noor Azuan and Shasmin, H.N. and Usman, J. and Wan Abas, Wan Abu Bakar (2005) Acceptable load carriage for primary school girls. European Journal of Scientific Research, 15 (3). pp. 396-403. ISSN 1450-216X,

Said, S.M. and Adikan, Faisal Rafiq Mahamd and Mekhilef, Saad and Rahim, N.A. (2005) Implementation of the problem-based learning approach in the Department of Electrical Engineering, University of Malaya. European Journal of Engineering Education, 30 (1). pp. 129-136. ISSN 0304-3797, DOI https://doi.org/10.1080/03043790512331313895.

Saidur, Rahman and Leong, W.B. and Masjuki, Haji Hassan and Jahirul, I. and Tamjis, M.R. (2005) Development and validation of emission model for a petrol engine using response surface methodology (RSM). Journal - The Institution of Engineers, Malaysia, 66 (4). pp. 44-51. ISSN 0126-513X,

Saidur, Rahman and Masjuki, Haji Hassan (2005) Different methods of grading or rating refrigerator freezers. Asian Journal on Energy & Environment, 6 (1). pp. 57-69. ISSN 1513-4121,

Saidur, Rahman and Masjuki, Haji Hassan and Mahlia, T.M.I. (2005) Labeling design effort for household refrigerator-freezers in Malaysia. Energy Policy, 33 (5). pp. 611-618. ISSN 0301-4215, DOI https://doi.org/10.1016/j.enpol.2003.09.005.

Wong, H.S. and Razak, H.A. (2005) Efficiency of calcined kaolin and silica fume as cement replacement material for strength performance. Cement and Concrete Research, 35 (4). pp. 696-702. ISSN 0008-8846, DOI https://doi.org/10.1016/j.cemconres.2004.05.051.

This list was generated on Mon Dec 23 09:24:52 2024 +08.