 | Up a level |
Fadzlin, Wan Afin and Hasanuzzaman, M. and Abd Rahim, Nasrudin (2024) Real-time outdoor experiment and performance analysis of dual-coil heat exchanger integrated thermal energy storage. Journal of Energy Storage, 81. p. 110420. ISSN 2352-152X, DOI https://doi.org/10.1016/j.est.2024.110420.
Hossain, M. Masrur and Shahriar, Tanvir and Habib, M. Ahsan and Hasanuzzaman, M. and Inan, M. Navid (2024) Techno-economic and environment assessment of landfill and sewage treatment plant-based combined power generation system: a case study for Dhaka. Biomass Conversiona and Biorefinery, 14 (1). pp. 701-717. ISSN 21906815, DOI https://doi.org/10.1007/s13399-022-02422-3.
Lai, Fei and Zhou, Jinzhi and Lu, Lin and Hasanuzzaman, M. and Yuan, Yanping (2023) Green building technologies in Southeast Asia: A review. Sustainable Energy Technologies and Assessments, 55. ISSN 2213-1388, DOI https://doi.org/10.1016/j.seta.2022.102946.
Nahar, Afroza and Parvin, Salma and Hasanuzzaman, M. and Rahim, N. A. (2023) Thermo-fluid physiognomies of a photovoltaic thermal collector: A comparative study with different flow channel materials. Journal of Solar Energy Engineering-Transactions of the Asme, 145 (1). ISSN 0199-6231, DOI https://doi.org/10.1115/1.4054661.
Chandran, Ratanashangkari and Hasanuzzaman, M. and Arici, Muslum and Kumar, Laveet and chandran, r (2022) Energy, economic and environmental impact analysis of phase change materials for cold chain transportation in Malaysia. Journal of Energy Storage, 55 (A). ISSN 2352-152X, DOI https://doi.org/10.1016/j.est.2022.105481.
Mostakim, Khodadad and Hasanuzzaman, M. (2022) Global prospects, challenges and progress of photovoltaic thermal system. Sustainable Energy Technologies and Assessments, 53 (A). ISSN 2213-1388, DOI https://doi.org/10.1016/j.seta.2022.102426.
Mojumder, Md Rayid Hasan and Hasanuzzaman, M. and Cuce, Erdem (2022) Prospects and challenges of renewable energy-based microgrid system in Bangladesh: a comprehensive review. Clean Technologies and Environmental Policy, 24 (7). pp. 1987-2009. ISSN 1618-954X, DOI https://doi.org/10.1007/s10098-022-02301-5.
Kumar, Laveet and Hasanuzzaman, M. and Rahim, N. A. (2022) Real-time experimental performance assessment of a photovoltaic thermal system cascaded with flat plate and heat pipe evacuated tube collector. Journal of Solar Energy Engineering-Transactions of the Asme, 144 (1). ISSN 0199-6231, DOI https://doi.org/10.1115/1.4051861.
Abed, Fayadh M. and Ahmed, Ahmed H. and Hasanuzzaman, M. and Kumar, Laveet and Hamaad, Nasur M. (2022) Experimental investigation on the effect of using chemical dyes on the performance of single-slope passive solar still. Solar Energy, 233. pp. 71-83. ISSN 0038-092X, DOI https://doi.org/10.1016/j.solener.2021.12.060.
Islam, M.K. and Nahar, Afroza and Hasanuzzaman, M. and Abd Rahim, Nasrudin (2022) Experimental performance investigation of a nanofluid based parabolic trough concentrator in Malaysia. AIUB Journal of Science and Engineering, 21 (3). 152 -158. ISSN 1608-3679, DOI https://doi.org/10.53799/ajse.v21i3.437.
Saha, Sumit and Ruslan, Abu Raj Md. and Monjur Morshed, A. K. M. and Hasanuzzaman, M. (2021) Global prospects and challenges of latent heat thermal energy storage: A review. Clean Technologies and Environmental Policy, 23 (2, SI). pp. 531-559. ISSN 1618-954X, DOI https://doi.org/10.1007/s10098-020-01997-7.
Kumar, Laveet and Hasanuzzaman, M. and Rahim, N.A. and Islam, M.M. (2021) Modeling, simulation and outdoor experimental performance analysis of a solar-assisted process heating system for industrial process heat. Renewable Energy, 164. pp. 656-673. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2020.09.062.
Islam, M. M. and Hasanuzzaman, M. and Rahim, N. A. and Pandey, A. K. and Rawa, M. and Kumar, L. (2021) Real time experimental performance investigation of a NePCM based photovoltaic thermal system: An energetic and exergetic approach. Renewable Energy, 172. pp. 71-87. ISSN 0960-1481, DOI https://doi.org/10.1016/j.renene.2021.02.169.
Abed, Fayadh M. and Eleiwi, Muhammad A. and Hasanuzzaman, M. and Islam, M. M. and Mohammed, Khaleel I. (2020) Design, development and effects of operational conditions on the performance of concentrated solar collector based desalination system operating in Iraq. SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS, 42. ISSN 22131388, DOI https://doi.org/10.1016/j.seta.2020.100886.
Kamyar, A. and Saidur, Rahman and Hasanuzzaman, M. (2012) Application of computational fluid dynamics (CFD) for nanofluids. International Journal of Heat and Mass Transfer, 55 (15-16). pp. 4104-4115. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2012.03.052.
Rahman, M.M. and Parvin, S. and Rahim, N.A. and Islam, M.R. and Saidur, Rahman and Hasanuzzaman, M. (2012) Effects of Reynolds and Prandtl number on mixed convection in a ventilated cavity with a heat-generating solid circular block. Applied Mathematical Modelling, 36 (5). pp. 2056-2066. ISSN 0307-904X, DOI https://doi.org/10.1016/j.apm.2011.08.014.
Ali, M.B. and Saidur, Rahman and Hasanuzzaman, M. and Ward, T.A. (2012) Energy and emission analysis in the malaysian food industries. Environmental Progress and Sustainable Energy, 27 (4). n/a-n/a. ISSN 1944-7450, DOI https://doi.org/10.1002/ep.11682.
Hasanuzzaman, M. and Rahim, N.A. and Hosenuzzaman, M. and Saidur, Rahman and Mahbubul, I.M. and Rashid, M.M. (2012) Energy savings in the combustion based process heating in industrial sector. Renewable and Sustainable Energy Reviews, 16 (7). pp. 4527-4536. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.05.027.
Saidur, Rahman and Hasanuzzaman, M. and Rahim, N.A. (2012) Energy, economic, and environmental analysis of the Malaysian industrial compressed-air systems. Clean Technologies and Environmental Policy, 14 (2). pp. 195-210. ISSN 1618-954X, DOI https://doi.org/10.1007/s10098-011-0386-9.
Saidur, Rahman and Meng, T.C. and Said, Z. and Hasanuzzaman, M. and Kamyar, A. (2012) Evaluation of the effect of nanofluid-based absorbers on direct solar collector. International Journal of Heat and Mass Transfer, 55 (21-22). pp. 5899-5907. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2012.05.087.
Rahman, M.M. and Billah, M.M. and Rahim, N.A. and Saidur, Rahman and Hasanuzzaman, M. (2012) Finite element simulation of magnetohydrodynamic mixed convection in a double-lid driven enclosure with a square heat-generating block. Journal of Heat Transfer-Transactions of the Asme, 134 (6). 0022-1481. ISSN 0022-1481, DOI https://doi.org/10.1115/1.4006010.
Rahman, M.M. and Billah, M.M. and Hasanuzzaman, M. and Saidur, Rahman and Rahim, N.A. (2012) Heat transfer enhancement of nanofluids in a Lid-Driven square enclosure. Numerical Heat Transfer, Part A: Applications, 62 (12). pp. 973-991. ISSN 1521-0634, DOI https://doi.org/10.1080/10407782.2012.715983.
Saidur, Rahman and Sambandam, M.T. and Hasanuzzaman, M. and Devaraj, D. and Rajakarunakaran, S. (2012) An analysis of actual energy savings in an indian cement industry through an energy efficiency index. International Journal of Green Energy, 9 (8). pp. 829-840. ISSN 1543-5075, DOI https://doi.org/10.1080/15435075.2011.647166.
Saidur, R. and Sambandam, M.T. and Hasanuzzaman, M. and Devaraj, D. and Rajakarunakaran, S. and Islam, M.D. (2012) An energy flow analysis in a paper-based industry. Clean Technologies and Environmental Policy, 14 (5). pp. 905-916. ISSN 1618954X, DOI https://doi.org/10.1007/s10098-012-0462-9.
Afshar, O. and Saidur, Rahman and Hasanuzzaman, M. and Jameel, M. (2012) A review of thermodynamics and heat transfer in solar refrigeration system. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5639-5648. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.05.016.
Thirugnanasambandam, M. and Hasanuzzaman, M. and Saidur, Rahman and Ali, M.B. and Rajakarunakaran, S. and Devaraj, D. and Rahim, N.A. (2011) Analysis of electrical motors load factors and energy savings in an Indian cement industry. Energy, 36 (7). pp. 4307-4314. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2011.04.011.
Saidur, Rahman and Hasanuzzaman, M. and Mahlia, T.M.I. and Rahim, N.A. and Mohammed, H.A. (2011) Chillers energy consumption, energy savings and emission analysis in an institutional buildings. Energy, 36 (8). pp. 5233-5238. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2011.06.027.
Saidur, Rahman and Mahlia, T.M.I. and Hasanuzzaman, M. (2011) Developing energy performance standard, label and test procedures and impacts analysis for commercial chillers. Energy Education Science and Technology Part a-Energy Science and Research, 27 (1). pp. 175-190. ISSN 1308-772X,
Hasanuzzaman, M. and Saidur, Rahman and Masjuki, Haji Hassan (2011) Effects of different variables on moisture transfer of household refrigerator-freezer. Energy Education Science and Technology Part A: Energy Science and Research, 27 (2). pp. 401-418. ISSN 1308-772X,
Hasanuzzaman, M. and Rahim, N.A. and Saidur, Rahman and Kazi, S.N. (2011) Energy savings and emissions reductions for rewinding and replacement of industrial motor. Energy, 36 (1). pp. 233-240. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2010.10.046.
Hasanuzzaman, M. and Saidur, Rahman and Rahim, N.A. (2011) Energy, exergy and economic analysis of an annealing furnace. International Journal of Physical Sciences, 6 (7). pp. 1257-1266. ISSN 1992-1950, DOI https://doi.org/10.5897/IJPS10.273.
Hasanuzzaman, M. and Golam, F. (2011) Gene actions involved in yield and yield contributing traits of chilli (Capsicum annuum L.). Australian Journal of Crop Science, 5 (13). pp. 1868-1875.
Billah, M.M. and Rahman, M.M. and Sharif, U.M. and Rahim, N.A. and Saidur, Rahman and Hasanuzzaman, M. (2011) Numerical analysis of fluid flow due to mixed convection in a lid-driven cavity having a heated circular hollow cylinder. International Communications in Heat and Mass Transfer, 38 (8). pp. 1093-1103. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2011.05.018.
Billah, M.M. and Rahman, M.M. and Saidur, Rahman and Hasanuzzaman, M. (2011) Simulation of mhd mixed convection heat transfer enhancement in a double lid-driven obstructed enclosure. International Journal of Mechanical and Materials Engineering, 6 (1). pp. 18-30. ISSN 1823-0334,
Rahman, M.M. and Billah, M.M. and Rahim, N.A. and Amin, N. and Saidur, Rahman and Hasanuzzaman, M. (2011) A numerical model for the simulation of double-diffusive natural convection in a right-angled triangular solar collector. International Journal of Renewable Energy Research, 1 (2). pp. 50-54. ISSN 1309-0127,
Saidur, Rahman and Hasanuzzaman, M. and Rahim, N.A. (2010) Energy use, energy savings and environmental analysis of industrial boilers and compressors. International Journal of Thermal & Environmental Engineering, 1 (1). pp. 29-36. ISSN 19237308, DOI https://doi.org/10.5383/ijtee.01.01.005.
Rahman, M.M. and Billah, M.M. and Mamun, M.A.H. and Saidur, Rahman and Hasanuzzaman, M. (2010) Reynolds and prandtl numbers effects on mhd mixed convection in a lid-driven cavity along with joule heating and a centered heat conducting circular block. International Journal of Mechanical and Materials Engineering, 5 (2). pp. 163-170. ISSN 1823-0334 ,
Saidur, Rahman and Hasanuzzaman, M. and Yogeswaran, S. and Mohammed, H.A. and Hossain, M.S. (2010) An end-use energy analysis in a Malaysian public hospital. Energy, 35 (12). pp. 4780-4785. ISSN 0360-5442, DOI https://doi.org/10.1016/j.energy.2010.09.012.
Saidur, Rahman and Rahim, N.A. and Hasanuzzaman, M. (2010) A review on compressed-air energy use and energy savings. Renewable and Sustainable Energy Reviews, 14 (4). pp. 1135-1153. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2009.11.013.
Saidur, Rahman and Abdelaziz, E.A. and Hasanuzzaman, M. and Mamun, M.A.H. (2010) A study of energy efficiency, economic and environmental benefits of a cooling tower. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 87-94. ISSN 18230334,
Saidur, Rahman and Hasanuzzaman, M. and Hasan, M.M. and Masjuki, Haji Hassan (2009) Overall thermal transfer value of residential buildings in Malaysia. Journal of Applied Sciences, 9 (11). pp. 2130-2136. ISSN 18125654, DOI https://doi.org/10.3923/jas.2009.2130.2136.
Saidur, Rahman and Masjuki, Haji Hassan and Hasanuzzaman, M. (2009) Perfromance of an improved solar car ventilator. International Journal of Mechanical and Materials Engineering, 4 (1). pp. 24-34. ISSN 1823-0334,
Saidur, Rahman and Jahirul, M.I. and Hasanuzzaman, M. and Masjuki, Haji Hassan (2008) Analysis of exhaust emissions of natural gas engine by using response surface methodology. Journal of Applied Sciences, 8 (19). pp. 3328-3339. ISSN 1812-5654, DOI https://doi.org/10.3923/jas.2008.3328.3339.
Hasanuzzaman, M. and Saidur, Rahman and Masjuki, Haji Hassan (2008) Investigation of energy consumption and energy savings of refrigerator-freezer during open and closed door condition. Journal of Applied Sciences, 8 (10). pp. 1822-1831. ISSN 1812-5654, DOI https://doi.org/10.3923/jas.2008.1822.1831.
Saidur, Rahman and Masjuki, Haji Hassan and Hasanuzzaman, M. and Kai, G.S. (2008) Investigation of energy performance and usage behavior of domestic refrigerator freezer using clustering and segmentation. Journal of Applied Sciences, 8 (21). pp. 3957-3962. ISSN 1812-5654, DOI https://doi.org/10.3923/jas.2008.3957.3962.
Hasanuzzaman, M. and Saidur, Rahman and Masjuki, Haji Hassan (2008) Moisture transfer and energy losses of household refrigeratorfreezer during the closed door operation. International Journal of Mechanical and Materials Engineering, 3 (1). 30-37..
Saidur, Rahman and Masjuki, Haji Hassan and Hasanuzzaman, M. and Mahlia, T.M.I. and Tan, C.Y. and Ooi, J.K. and Yoon, P.H. (2008) Performance investigation of a solar powered thermoelectric refrigerator. International Journal of Mechanical and Materials Engineering, 3 (1). pp. 7-16. ISSN 1823-0334,
Hasanuzzaman, M. and Saidur, Rahman and Ali, M. and Masjuki, Haji Hassan (2007) Effects of variables on natural convective heat transfer through V-corrugated vertical plates. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 109-117. ISSN 18230334,
Saidur, Rahman and Sattar, M.A. and Hasanuzzaman, M. and Cheng, C.F. and Masjuki, Haji Hassan (2007) Open and closed door moisture transport and corresponding energy consumption in household refrigerator. Journal of Energy & Environment,, 6. pp. 18-27.
Saidur, Rahman and Hasanuzzaman, M. and Sattar, M.A. and Masjuki, Haji Hassan and Badruddin, I.A. and Mohiuddin, A.K.M. (2007) An analysis of energy use, energy intensity and emissions at the industrial sector of Malaysia. International Journal of Mechanical and Materials Engineering, 2 (1). pp. 84-92. ISSN 1823-0334,
Jahirul, M.I. and Saidur, Rahman and Hasanuzzaman, M. and Masjuki, Haji Hassan and Kalam, M.A. (2007) A comparison of the air pollution of gasoline and CNG driven car for Malaysia. International Journal of Mechanical and Materials Engineering, 2 (2). pp. 130-138. ISSN 18230334 ,
Hasanuzzaman, M. and Rahim, N.A. and Saidur, Rahman (2011) Analysis of energy, exergy and energy savings of a fire tube boiler. In: 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011, 2011, Kuala Lumpur.
Hasanuzzaman, M. and Saidur, Rahman and Rahim, N.A. (2011) Effectiveness enchancement of heat exchanger by using nanofluids. In: 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011, 2011, Kuala Lumpur.
Saidur, R. and Hasanuzzaman, M. and Rahim, N.A. (2010) Energy consumption, energy savings and emission analysis for industrial motors. In: International Conference on Industrial Engineering and Operations Management (IEOM2010) , January 9-10, Dhaka, Bangladesh.
Hasanuzzaman, M. and Rahim, N.A. and Saidur, Rahman (2010) Analysis of energy savings for rewinding and replacement of industrial motor. In: 2010 IEEE International Conference on Power and Energy, PECon2010, 2010, Kuala Lumpur.
Saidur, Rahman and Hasanuzzaman, M. (2009) Energy and environmental analysis of electrical motor in industrial boilers. In: 2009 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability, ICEE 2009, 2009, Malacca.
