 | Up a level |
Chung, E. N. M. and Kittur, Mohammed Ibrahim and Andriyana, Andri and Ganesan, P. (2024) On the thermo-oxidative aging of elastomers: A comprehensive review. Polymer, 304. p. 127109. ISSN 0032-3861, DOI https://doi.org/10.1016/j.polymer.2024.127109.
Abbas, M. K. G. and Kuldip Singh, Ramesh Singh. and Lee, K. Y. Sara and Wong, Y. H. and Tan, Chou Yong and Alengaram, Ubagaram Johnson and Ganesan, P. and Musharavati, Farayi and Zalnezhad, Erfan (2022) Densification of copper oxide doped alumina toughened zirconia by conventional sintering. Ceramics International, 48 (5). pp. 6287-6293. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2021.11.171.
Lim, Yan Shin and Ganesan, P. and Munusamy, Mahendra Varman and Hamad, F. A. and Krishnasamy, Sivakumar (2021) Effects of microbubble aeration on water quality and growth performance of Litopenaeus vannamei in biofloc system. Aquacultural Engineering, 93. ISSN 0144-8609, DOI https://doi.org/10.1016/j.aquaeng.2021.102159.
Tripathi, Manoj and Bhatnagar, Ashish and Pandey, Krishna Kumar and Ganesan, P. (2021) Synthesis, characterization and performance study of biomass derived supercapacitor electrode. Journal of The Electrochemical Society, 168 (5). ISSN 0013-4651, DOI https://doi.org/10.1149/1945-7111/abff62.
Zabed, H. and Faruq, G. and Boyce, A.N. and Sahu, J.N. and Ganesan, P. (2016) Evaluation of high sugar containing corn genotypes as viable feedstocks for decreasing enzyme consumption during dry-grind ethanol production. Journal of the Taiwan Institute of Chemical Engineers, 58. pp. 467-475. ISSN 1876-1070, DOI https://doi.org/10.1016/j.jtice.2015.06.030.
Zabed, H. and Faruq, G. and Sahu, J.N. and Boyce, A.N. and Ganesan, P. (2016) A comparative study on normal and high sugary corn genotypes for evaluating enzyme consumption during dry-grind ethanol production. Chemical Engineering Journal, 287. pp. 691-703. ISSN 1385-8947, DOI https://doi.org/10.1016/j.cej.2015.11.082.
Narrein, K. and Sivasankaran, S. and Ganesan, P. (2015) Two-phase analysis of a helical microchannel heat sink using nanofluids. Numerical Heat Transfer, Part A: Applications, 68 (11). pp. 1266-1279. ISSN 1040-7782, DOI https://doi.org/10.1080/10407782.2015.1032017.
Ijam, A. and Saidur, R. and Ganesan, P. and Golsheikh, A.M. (2015) Stability, therrno-physical properties, and electrical conductivity of graphene oxide-deionized water/ethylene glycol based nanofluid. International Journal of Heat and Mass Transfer, 87. pp. 92-103. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2015.02.060.
Mubarak, N.M. and Sahu, J.N. and Abdullah, E.C. and Jayakumar, N.S. and Ganesan, P. (2015) Microwave assisted multiwall carbon nanotubes enhancing Cd(II) adsorption capacity in aqueous media. Journal of Industrial and Engineering Chemistry, 24. pp. 24-33. ISSN 1226-086X, DOI https://doi.org/10.1016/j.jiec.2014.09.005.
Ruthiraan, M. and Mubarak, N.M. and Thines, R.K. and Abdullah, E.C. and Sahu, J.N. and Jayakumar, N.S. and Ganesan, P. (2015) Comparative kinetic study of functionalized carbon nanotubes and magnetic biochar for removal of Cd2+ ions from wastewater. Korean Journal of Chemical Engineering, 32 (3). pp. 446-457. ISSN 0256-1115, DOI https://doi.org/10.1007/s11814-014-0260-7.
Tripathi, M. and Sahu, J.N. and Ganesan, P. and Monash, P. and Dey, T.K. (2015) Effect of microwave frequency on dielectric properties of oil palm shell (OPS) and OPS char synthesized by microwave pyrolysis of OPS. Journal of Analytical and Applied Pyrolysis, 112. pp. 306-312. ISSN 0165-2370, DOI https://doi.org/10.1016/j.jaap.2015.01.007.
Hamad, F.A. and Ganesan, P. (2015) Effect of drops on turbulence of kerosene-water two-phase flow in vertical pipe. International Journal of Heat and Fluid Flow, 56. pp. 152-159. ISSN 0142-727X,
Tripathi, M. and Sahu, J.N. and Ganesan, P. and Dey, T.K. (2015) Effect of temperature on dielectric properties and penetration depth of oil palm shell (OPS) and OPS char synthesized by microwave pyrolysis of OPS. Fuel, 153. pp. 257-266. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2015.02.118.
Kazemzadeh, A. and Ganesan, P. and Ibrahim, F. and Kulinsky, L. and Madou, M.J. (2015) Guided routing on spinning microfluidic platforms. RSC Advances, 5 (12). pp. 8669-8679. ISSN 2046-2069, DOI https://doi.org/10.1039/C4a14397c.
Niakan, A. and Ramesh, S. and Ganesan, P. and Tan, C.Y. and Purbolaksono, J. and Chandran, H. and Ramesh, S. and Teng, W.D. (2015) Sintering behaviour of natural porous hydroxyapatite derived from bovine bone. Ceramics International, 41 (2, B). pp. 3024-3029.
Narrein, K. and Sivasankaran, S. and Ganesan, P. (2015) Two-Phase Analysis of A Helical Microchannel Heat Sink Using Nanofluids. Numerical Heat Transfer, Part A: Applications, 68 (11). pp. 1266-1279. ISSN 1040-7782, DOI doi:https://doi.org/10.1080/10407782.2015.1032017.
Sabzoi, N. and Yong, E.K. and Jayakumar, N.S. and Sahu, J.N. and Ganesan, P. and Mubarak, N.M. and Mazari, S.A. (2015) An optimisation study for catalytic hydrolysis of oil palm shell using response surface methodology. Journal of Oil Palm Research, 27 (4). pp. 339-351. ISSN 1511-2780,
Islam, M.T. and Ganesan, P. and Cheng, J. (2015) A pair of bubbles' rising dynamics in a xanthan gum solution: a CFD study. RSC Advances, 5 (11). pp. 7819-7831. ISSN 2046-2069, DOI https://doi.org/10.1039/c4ra15728a.
Kazemzadeh, A. and Ganesan, P. and Ibrahim, Fatimah and He, S. and Madou, M.J. (2013) The effect of contact angles and capillary dimensions on the burst frequency of super hydrophilic and hydrophilic centrifugal microfluidic platforms, a CFD study. PLoS ONE, 8 (9). pp. 1-12. ISSN 1932-6203, DOI https://doi.org/10.1371/journal.pone.0073002.
Ijam, A. and Saidur, Rahman and Ganesan, P. (2012) Cooling of minichannel heat sink using nanofluids. International Communications in Heat and Mass Transfer, 39 (8). pp. 1188-1194. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2012.06.022.
Ganesan, P. and Heng, S. and Xu, H. (2011) Development of an image-based model for capillary vasculature of retina. Computer Methods and Programs in Biomedicine, 102 (1). pp. 35-46. ISSN 0169-2607,
