Items where Author is "Dahari, M."

Cao, Yan and Mansir, Ibrahim B. and Mouldi, Abir and Gepreel, Khaled A. and Dahari, M. and Le, Tri Hieu and Badran, Mohamed Fathy and Nguyen, Van Nhanh and Wae-hayee, Makatar (2022) Using natural convection mechanism of nanofluid for cooling an embedded hot plate in corner of a square enclosure: A numerical simulation. Case Studies in Thermal Engineering, 33. ISSN 2214-157X, DOI https://doi.org/10.1016/j.csite.2022.101926.

Sadri, R. and Zangeneh Kamali, K. and Hosseini, M. and Zubir, M.N.M. and Kazi, S.N. and Ahmadi, G. and Dahari, M. and Huang, N.M. and Golsheikh, A.M. (2017) Experimental study on thermo-physical and rheological properties of stable and green reduced graphene oxide nanofluids: Hydrothermal assisted technique. Journal of Dispersion Science and Technology, 38 (9). pp. 1302-1310. ISSN 0193-2691, DOI https://doi.org/10.1080/01932691.2016.1234387.

Bhuiyan, M.S.H. and Choudhury, I.A. and Dahari, M. and Nukman, Y. and Dawal, S.Z. (2017) An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis. Applied Bionics and Biomechanics, 2017. pp. 1-14. ISSN 1176-2322, DOI https://doi.org/10.1155/2017/7595642.

Tan, J.D. and Dahari, M. and Koh, S.P. and Koay, Y.Y. and Abed, I.A. (2017) A new experiential learning electromagnetism-like mechanism for numerical optimization. Expert Systems with Applications, 86. pp. 321-333. ISSN 0957-4174, DOI https://doi.org/10.1016/j.eswa.2017.06.002.

Yarmand, H. and Gharehkhani, S. and Shirazi, S.F.S. and Amiri, A. and Alehashem, M.S. and Dahari, M. and Kazi, S.N. (2016) Experimental investigation of thermo-physical properties, convective heat transfer and pressure drop of functionalized graphene nanoplatelets aqueous nanofluid in a square heated pipe. Energy Conversion and Management, 114. pp. 38-49. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2016.02.008.

Bhuiyan, M.S.H. and Choudhury, I.A. and Dahari, M. and Nukman, Y. (2016) An Investigation into Turning of ASSAB-705 Steel Using Multiple Sensors. Materials and Manufacturing Processes, 31 (7). pp. 896-904. ISSN 1042-6914, DOI https://doi.org/10.1080/10426914.2015.1048358.

Akbari, O.A. and Toghraie, A. and Karimipour, A. and Safaei, M.R. and Goodarzi, M. and Alipour, H. and Dahari, M. (2016) Investigation of rib's height effect on heat transfer and flow parameters of laminar water-Al2O3 nanofluid in a rib-microchannel. Applied Mathematics and Computation, 290. pp. 135-153. ISSN 0096-3003, DOI https://doi.org/10.1016/j.amc.2016.05.053.

Yarmand, H. and Gharehkhani, S. and Shirazi, S.F.S. and Amiri, A. and Montazer, E. and Arzani, H.K. and Sadri, R. and Dahari, M. and Kazi, S.N. (2016) Nanofluid based on activated hybrid of biomass carbon/graphene oxide: Synthesis, thermo-physical and electrical properties. International Communications in Heat and Mass Transfer, 72. pp. 10-15. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2016.01.004.

Afrand, M. and Ahmadi Nadooshan, A. and Hassani, M. and Yarmand, H. and Dahari, M. (2016) Predicting the viscosity of multi-walled carbon nanotubes/water nanofluid by developing an optimal artificial neural network based on experimental data. International Communications in Heat and Mass Transfer, 77. pp. 49-53. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2016.07.008.

Afrand, M. and Nazari Najafabadi, K. and Sina, N. and Safaei, M.R. and Kherbeet, A.Sh. and Wongwises, S. and Dahari, M. (2016) Prediction of dynamic viscosity of a hybrid nano-lubricant by an optimal artificial neural network. International Communications in Heat and Mass Transfer, 76. pp. 209-214. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2016.05.023.

Yarmand, H. and Gharehkhani, S. and Shirazi, S.F.S. and Goodarzi, M. and Amiri, A. and Sarsam, W.S. and Alehashem, M.S. and Dahari, M. and Kazi, S.N. (2016) Study of synthesis, stability and thermo-physical properties of graphene nanoplatelet/platinum hybrid nanofluid. International Communications in Heat and Mass Transfer, 77. pp. 15-21. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2016.07.010.

Bashirnezhad, K. and Bazri, S. and Safaei, M.R. and Goodarzi, M. and Dahari, M. and Mahian, O. and Dalkiliça, A.S. and Wongwises, S. (2016) Viscosity of nanofluids: A review of recent experimental studies. International Communications in Heat and Mass Transfer, 73. pp. 114-123. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2016.02.005.

Akbari, O.A. and Safaei, M.R. and Goodarzi, M. and Akbar, N.S. and Zarringhalam, M. and Shabani, G.A.S. and Dahari, M. (2016) A modified two-phase mixture model of nanofluid flow and heat transfer in a 3-D curved microtube. Advanced Powder Technology, 27 (5). pp. 2175-2185. ISSN 0921-8831, DOI https://doi.org/10.1016/j.apt.2016.08.002.

Alavi, S.M.A. and Safaei, M.R. and Mahian, O. and Goodarzi, M. and Yarmand, H. and Dahari, M. and Wongwises, S. (2015) A hybrid finite-element/finite-difference scheme for solving the 3-D energy equation in transient nonisothermal fluid flow over a staggered tube bank. Numerical Heat Transfer Part B-Fundamentals, 68 (2). pp. 169-183. ISSN 1040-7790, DOI https://doi.org/10.1080/10407790.2015.1012440.

Haghshenasfard, M. and Yeoh, G.H. and Dahari, M. and Hooman, K. (2015) On numerical study of calcium sulphate fouling under sub-cooled flow boiling conditions. Applied Thermal Engineering, 81. pp. 18-27. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2015.01.079.

Bhuiyan, M.S.H. and Choudhury, I.A. and Dahari, M. (2015) Development of a control system for artificially rehabilitated limbs: A review. Biological Cybernetics, 109 (2). pp. 141-162. ISSN 0340-1200, DOI https://doi.org/10.1007/s00422-014-0635-1.

Forooghi, P. and Abdi, I.A. and Dahari, M. and Hooman, K. (2015) Buoyancy induced heat transfer deterioration in vertical concentric and eccentric annuli. International Journal of Heat and Mass Transfer, 81. pp. 222-233. ISSN 0017-9310, DOI https://doi.org/10.1016/j.ijheatmasstransfer.2014.10.009.

Hooman, K. and Sauret, E. and Dahari, M. (2015) Theoretical modelling of momentum transfer function of bi-disperse porous media. Applied Thermal Engineering, 75. pp. 867-870. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2014.10.067.

Garoosi, F. and Safaei, M.R. and Dahari, M. and Hooman, K. (2015) Eulerian-Lagrangian analysis of solid particle distribution in an internally heated and cooled air-filled cavity. Applied Mathematics and Computation, 250. pp. 28-46. ISSN 0096-3003, DOI https://doi.org/10.1016/j.amc.2014.10.068.

Yousefi, S. and Atrens, A.D. and Sauret, E. and Dahari, M. and Hooman, K. (2015) CFD Convective Flow Simulation of the Varying Properties of CO2-H2O Mixtures in Geothermal Systems. Scientific World Journal, 2015. pp. 1-8. ISSN 2356-6140, DOI https://doi.org/10.1155/2015/843068.

Yarmand, H. and Gharehkhani, S. and Ahmadi, G. and Shirazi, S.F.S. and Baradaran, S. and Montazer, E. and Zubir, M.N.M. and Alehashem, M.S. and Kazi, S.N. and Dahari, M. (2015) Graphene nanoplatelets–silver hybrid nanofluids for enhanced heat transfer. Energy Conversion and Management, 100. pp. 419-428. ISSN 0196-8904, DOI https://doi.org/10.1016/j.enconman.2015.05.023.

Dahari, M. and Liu, Y. (2012) A review of auto-guided-vehicles routing algorithms. Advanced Materials Research, 479. pp. 443-456.

Dahari, M. and Tan, J.D. (2011) Forward and inverse kinematics model for robotic welding process using KR-16KS KUKA robot. Science. pp. 1-6. ISSN 1095-9203, DOI https://doi.org/10.1109/ICMSAO.2011.5775598.

Taha, Z. and Deboucha, A. and Dahari, M. (2010) Small-scale helicopter system identification model using recurrent neural networks. In: Trends in Electronics Conference, 21-24 Nov 2010, Fukuoka, Japan.

Abdul Mutalib, M.I. and Dahari, M. and Hisam, N.A. and Ramlan, R. (2009) Use of suitable equation of state for the conversion of volumetric to mass flowrate in ngv refueling measurement. Journal-The Institution of Engineers, Malaysia, 7 (2). pp. 5-12.