 | Up a level |
Wu, Bo and Ibrahim, Mahmoud Zakaria and Raja, Sufian and Yusof, Farazila and Bushroa, Abdul Razak and Muhamad, Mohd Ridha and Huang, Rongxue and Zhang, Yun and Badruddin, Irfan Anjum and Hussien, Mohamed and Kamangar, Sarfaraz (2022) The influence of reinforcement particles friction stir processing on microstructure, mechanical properties, tribological and corrosion behaviors: A review. Journal of Materials Research and Technology-JMR&T, 20. pp. 1940-1975. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2022.07.172.
Mesbah, M. and Fattahi, A. and Bushroa, Abdul Razak and Faraji, G. and Wong, K. Y. and Basirun, Wan Jefrey and Fallahpour, A. and Nasiri-Tabrizi, B. (2021) Experimental and modelling study of ultra-fine grained zk60 magnesium alloy with simultaneously improved strength and ductility processed by parallel tubular channel angular pressing. Metals and Materials International, 27 (2). pp. 277-297. ISSN 1598-9623, DOI https://doi.org/10.1007/s12540-019-00495-w.
Syafiq, A. and Vengadaesvaran, Balakrishnan and Ahmed, Usman and Rahim, Nasrudin Abd and Pandey, Adarsh Kumar and Bushroa, Abdul Razak and Ramesh, Kasi and Ramesh, Subramaniam (2020) Facile synthesize of transparent hydrophobic nano- CaCO3 based coatings for self-cleaning and anti-fogging. Materials Chemistry and Physics, 239. p. 121913. ISSN 0254-0584, DOI https://doi.org/10.1016/j.matchemphys.2019.121913.
Karimzadeh, Atefeh and Ayatollahi, Majid Reza and Rahimian Koloor, Seyed Saeid and Bushroa, Abdul Razak and Yahya, Mohd Yazid and Tamin, Mohd Nasir (2019) Assessment of Compressive Mechanical Behavior of Bis-GMA Polymer Using Hyperelastic Models. Polymers, 11 (10). p. 1571. ISSN 2073-4360, DOI https://doi.org/10.3390/polym11101571.
Karimzadeh, Atefeh and Koloor, Seyed Saeid Rahimian and Ayatollahi, Majid Reza and Bushroa, Abdul Razak and Yahya, Mohd Yazid (2019) Assessment of Nano-Indentation Method in Mechanical Characterization of Heterogeneous Nanocomposite Materials Using Experimental and Computational Approaches. Scientific Reports, 9 (1). p. 15763. ISSN 2045-2322, DOI https://doi.org/10.1038/s41598-019-51904-4.
Mohamad Zaidi, Umi Zalilah and Bushroa, Abdul Razak and Ghahnavyeh, Reza Rahbari and Mahmoodian, Reza (2019) Crystallite size and microstrain: XRD line broadening analysis of AgSiN thin films. Pigment & Resin Technology, 48 (6). pp. 473-480. ISSN 0369-9420, DOI https://doi.org/10.1108/PRT-03-2018-0026.
Sarraf, Masoud and Sukiman, Nazatul Liana and Bushroa, Abdul Razak and Nasiri-Tabrizi, Bahman and Dabbagh, Ali and Abu Kasim, Noor Hayaty and Basirun, Wan Jefrey (2019) In vitro bioactivity and corrosion resistance enhancement of Ti-6Al-4V by highly ordered TiO2 nanotube arrays. Journal of the Australian Ceramic Society, 55 (1). pp. 187-200. ISSN 2510-1560, DOI https://doi.org/10.1007/s41779-018-0224-1.
Rafieerad, Ali Reza and Bushroa, Abdul Razak and Nasiri-Tabrizi, Bahman and Baradaran, Saied and Amiri, Ahmad and Saber-Samandari, Saeed and Khanahmadi, Soofia and Zeimaran, Ehsan and Basirun, Wan Jefrey and Kalaiselvam, Kaveena and Vellasamy, Kumutha Malar and Vadivelu, Jamuna (2019) Simultaneous enhanced antibacterial and osteoblast cytocompatibility performance of Ti6Al7Nb implant by nano-silver/graphene oxide decorated mixed oxide nanotube composite. Surface and Coatings Technology, 360. pp. 181-195. ISSN 0257-8972, DOI https://doi.org/10.1016/j.surfcoat.2018.12.119.
Syafiq, A. and Vengadaesvaran, Balakrishnan and Rahim, Nasrudin Abd and Pandey, Adarsh Kumar and Bushroa, Abdul Razak and Ramesh, Kasi and Ramesh, Subramaniam (2019) Transparent self-cleaning coating of modified polydimethylsiloxane (PDMS) for real outdoor application. Progress in Organic Coatings, 131. pp. 232-239. ISSN 0300-9440, DOI https://doi.org/10.1016/j.porgcoat.2019.02.020.
Rafieerad, Ali Reza and Bushroa, Abdul Razak and Nasiri-Tabrizi, Bahman and Amiri, Ahmad and Yusof, Farazila and Vadivelu, Jamuna and Basirun, Wan Jefrey (2018) Anodic pine cone-like WO3/MoO3/TiO2 film with well-defined nanoflakes on Ti–6Al–7Nb implant. Journal of the Australian Ceramic Society, 54 (1). pp. 129-137. ISSN 2510-1560, DOI https://doi.org/10.1007/s41779-017-0134-7.
Rafieerad, Ali Reza and Bushroa, Abdul Razak and Amiri, Ahmad and Kalaiselvam, Kaveena and Vellasamy, Kumutha Malar and Vadivelu, Jamuna (2018) Antibacterial biocompatible arginine functionalized mono-layer graphene: No more risk of silver toxicity. Journal of Hazardous Materials, 360. pp. 132-140. ISSN 0304-3894, DOI https://doi.org/10.1016/j.jhazmat.2018.07.107.
Ghouli, S. and Ayatollahi, Majid Reza and Bushroa, Abdul Razak (2018) Fracture characterization of ceria partially stabilized zirconia using the GMTSN criterion. Engineering Fracture Mechanics, 199. pp. 647-657. ISSN 0013-7944, DOI https://doi.org/10.1016/j.engfracmech.2018.06.037.
Sarraf, Masoud and Dabbagh, Ali and Bushroa, Abdul Razak and Mahmoodian, Reza and Nasiri-Tabrizi, Bahman and Hosseini, Hamid Reza Madaah and Saber-Samandari, Saeed and Abu Kasim, Noor Hayaty and Abdullah, Hadijah and Sukiman, Nazatul Liana (2018) Highly-ordered TiO 2 nanotubes decorated with Ag 2 O nanoparticles for improved biofunctionality of Ti6Al4V. Surface and Coatings Technology, 349. pp. 1008-1017. ISSN 0257-8972, DOI https://doi.org/10.1016/j.surfcoat.2018.06.054.
Al-Saeedi, Salman and Sarhan, Ahmed Aly Diaa Mohammed and Bushroa, Abdul Razak (2018) Investigating the Tribological Characteristics of Burnished Polyoxymethylene—ANFIS and FE Modeling. Tribology Transactions, 61 (5). pp. 880-888. ISSN 1040-2004, DOI https://doi.org/10.1080/10402004.2018.1439208.
Rafieerad, Ali Reza and Bushroa, Abdul Razak and Amiri, Ahmad and Gopinath, Venkatraman and Sookhakian, Mehran and Baradaran, Saeid and Rafieerad, M. and Saber-Samandari, Saeed and Vadivelu, Jamuna (2018) Large-scale hybrid silver nanowall-reduced graphene oxide biofilm: A novel morphology by facile electrochemical deposition. Surface and Coatings Technology, 347. pp. 297-303. ISSN 0257-8972, DOI https://doi.org/10.1016/j.surfcoat.2018.04.076.
Rafieerad, Ali Reza and Bushroa, Abdul Razak and Banihashemian, S.M. and Amiri, Ahmad (2018) Not-yet-designed multilayer Nb/HA/MWCNT-Au/Se/AuNPs and NbO2/HA/GO/Se biocomposites coated Ti6Al7Nb implant. Materials Today Communications, 15. pp. 294-308. ISSN 2352-4928, DOI https://doi.org/10.1016/j.mtcomm.2018.02.020.
Adeleke, Sakiru Adekunle and Bushroa, Abdul Razak and Herliansyah, Muhammad Kusumawan and Sopyan, Iis and Basirun, Wan Jefrey and Ladan, Magaji (2018) Preparation, scratch adhesion and anti-corrosion performance of TiO2-MgO-BHA coating on Ti6Al4V implant by plasma electrolytic oxidation technique. Journal of Adhesion Science and Technology, 32 (1). pp. 91-102. ISSN 0169-4243, DOI https://doi.org/10.1080/01694243.2017.1341772.
Rahman, M.F.A. and Zhalilah, M.Z. and Latiff, A.A. and Rosol, A.H.A. and Lokman, M.Q. and Bushroa, Abdul Razak and Dimyati, Kaharudin and Harun, Sulaiman Wadi (2018) Pure antimony film as saturable absorber for Q-switched erbium-doped fiber laser. Journal of Modern Optics, 65 (7). pp. 811-817. ISSN 0950-0340, DOI https://doi.org/10.1080/09500340.2017.1402964.
Rahman, Mohd Fauzi Ab and Latiff, Anas Abdul and Zaidi, Umi Zhalilah Mohd and Rusdi, Muhammad Farid Mohd and Rosol, Ahmad Haziq Aiman and Bushroa, Abdul Razak and Dimyati, Kaharudin and Harun, Sulaiman Wadi (2018) Q-switched and mode-locked thulium-doped fiber laser with pure Antimony film Saturable absorber. Optics Communications, 421. pp. 99-104. ISSN 0030-4018, DOI https://doi.org/10.1016/j.optcom.2018.03.073.
Sarraf, Masoud and Dabbagh, Ali and Bushroa, Abdul Razak and Nasiri-Tabrizi, Bahman and Hosseini, Hamid Reza Madaah and Saber-Samandari, Saeed and Abu Kasim, Noor Hayaty and Lum, Kah Yean and Sukiman, Nazatul Liana (2018) Silver oxide nanoparticles-decorated tantala nanotubes for enhanced antibacterial activity and osseointegration of Ti6Al4V. Materials & Design, 154. pp. 28-40. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2018.05.025.
Adeleke, Sakiru Adekunle and Ramesh, Singh and Bushroa, Abdul Razak and Ching, Yern Chee and Sopyan, Iis and Maleque, Md Abdul and Krishnasamy, Sivakumar and Chandran, Hari and Misran, Halina and Sutharsini, Ubenthiran (2018) The properties of hydroxyapatite ceramic coatings produced by plasma electrolytic oxidation. Ceramics International, 44 (2). pp. 1802-1811. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2017.10.114.
Bhatti, J. and Fazal, M.A. and Khan, A.F. and Bushroa, Abdul Razak and Quazi, M.M. (2016) Investigation of the mechanical properties of electrodeposited nickel and magnetron sputtered chromium nitride coatings deposited on mild steel substrate. Journal of Adhesion Science and Technology, 30 (20). pp. 2224-2235. ISSN 0169-4243, DOI https://doi.org/10.1080/01694243.2016.1178027.
Mehran, Q.M. and Bushroa, Abdul Razak and Fazal, M.A. (2015) Evaluation of CrAlN multilayered coatings deposited by PVD magnetron sputtering. Journal of Adhesion Science and Technology, 29 (19). pp. 2076-2089. ISSN 0169-4243, DOI https://doi.org/10.1080/01694243.2015.1054577.
Zavareh, M.A. and Sarhan, A.A.D. and Bushroa, Abdul Razak and Basirun, Wan Jefrey (2015) The tribological and electrochemical behavior of HVOF-sprayed Cr3C2–NiCr ceramic coating on carbon steel. Ceramics International, 41 (4). pp. 5387-5396. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2014.12.102.
Naderi, Sadjad and Hassan, Mohamed Mohsen Abdel-Naeim and Bushroa, Abdul Razak (2015) Alternative methods to determine the elastoplastic properties of sintered hydroxyapatite from nanoindentation testing. Materials & Design, 67. pp. 360-368. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2014.11.030.
Zavareh, M.A. and Sarhan, Ahmed A.D. and Bushroa, Abdul Razak and Basirun, Wan Jefrey (2014) Plasma thermal spray of ceramic oxide coating on carbon steel with enhanced wear and corrosion resistance for oil and gas applications. Ceramics International, 40 (9). pp. 14267-14277. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2014.06.017.
Afrasiab, M. and Faraji, G. and Tavakkoli, V. and Mashhadi, M.M. and Bushroa, Abdul Razak (2014) Excellent energy absorption capacity of nanostructured Cu–Zn thin-walled tube. Materials Science and Engineering: A, 599. pp. 141-144. ISSN 0921-5093, DOI https://doi.org/10.1016/j.msea.2014.01.081.
Faraji, G. and Ebrahimi, M. and Bushroa, Abdul Razak (2014) Ultrasonic assisted tubular channel angular pressing process. Materials Science and Engineering: A, 599. pp. 10-15. ISSN 0921-5093, DOI https://doi.org/10.1016/j.msea.2014.01.069.
Mesbah, M. and Faraji, G. and Bushroa, Abdul Razak (2014) Characterization of nanostructured pure aluminum tubes produced by tubular channel angular pressing (TCAP). Materials Science and Engineering: A, 590. pp. 289-294. ISSN 0921-5093, DOI https://doi.org/10.1016/j.msea.2013.10.036.
Hassan, Mohamed Mohsen Abdel-Naeim and Naderi, Sadjad and Bushroa, Abdul Razak (2014) Low-velocity impact damage of woven fabric composites: Finite element simulation and experimental verification. Materials & Design, 53. pp. 706-718. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2013.07.068.
Faraji, G. and Mashhadi, M.M. and Bushroa, Abdul Razak and Babaei, A. (2013) TEM analysis and determination of dislocation densities in nanostructured copper tube produced via parallel tubular channel angular pressing process. Materials Science and Engineering: A, 563. pp. 193-198. ISSN 0921-5093, DOI https://doi.org/10.1016/j.msea.2012.11.065.
Bushroa, Abdul Razak and Rahbari, R.G. and Masjuki, Haji Hassan and Muhamad, Muhamad Rasat (2012) Approximation of crystallite size and microstrain via XRD line broadening analysis in TiSiN thin films. Vacuum, 86 (8). pp. 1107-1112. ISSN 0042-207X, DOI https://doi.org/10.1016/j.vacuum.2011.10.011.
Bushroa, Abdul Razak and Masjuki, Haji Hassan and Muhamad, Muhamad Rasat and Beake, B.D. (2011) Optimized scratch adhesion for TiSiN coatings deposited by a combination of DC and RF sputtering. Surface and Coatings Technology, 206 (7). pp. 1837-1844. ISSN 0257-8972, DOI https://doi.org/10.1016/j.surfcoat.2011.07.048.
Bushroa, Abdul Razak and Masjuki, Haji Hassan and Muhamad, M.R. (2011) Parameter optimization of sputtered Ti interlayer using Taguchi method. International Journal of Mechanical and Materials Engineering, 6 (2). pp. 140-146. ISSN 1823-0334,
Bushroa, Abdul Razak and Azmi, N.A. and Mahmoodian, Reza and Abd Shukor, Mohd Hamdi and Gupta, V. and Wasa, K. (2016) An Energy Star Physical Vapor Deposition (PVD) Machine. In: International Conference on Knowledge Transfer, 1-3 December 2015, Putrajaya, Malaysia.
