Yin, C.Y. and Aroua, M.K. and Daud, W.M.A.W. (2007) Review of modifications of activated carbon for enhancing contaminant uptakes from aqueous solutions. Separation and Purification Technology, 52 (3). pp. 403-415. ISSN 1383-5866, DOI https://doi.org/10.1016/j.seppur.2006.06.009.
Full text not available from this repository.
Official URL: https://www.sciencedirect.com/science/article/pii/...
Abstract
Due to its versatility and wide range of applications, activated carbon is widely used as contaminant removal media. Recent research have focused on enhancing the effectiveness of activated carbon by modifying their specific properties in order to enable the carbon to develop affinity for certain contaminants. In view of this, a comprehensive list of literatures on chemical, physical and biological modification techniques of activated carbon pertaining to enhancement of contaminant removal from aqueous solutions was compiled and reviewed. Acidic treatment to introduce acidic functional groups onto surface of activated carbon was by far, the most studied technique. It was apparent from the literature survey that the beneficial effects of specific modification techniques on activated carbon adsorption of targeted contaminant species from aqueous solutions were profound, with some studies reported increase of contaminant uptake factors of more than 2. Concurrently, considerable decreases associated with certain contaminant uptakes can also occur depending on the technique used.
| Item Type: | Article |
|---|---|
| Funders: | UNSPECIFIED |
| Additional Information: | Cited By (since 1996):115 Export Date: 21 April 2013 Source: Scopus CODEN: SPUTF :doi 10.1016/j.seppur.2006.06.009 Language of Original Document: English Correspondence Address: Yin, C.Y.; Faculty of Chemical Engineering, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia; email: yinyang@salam.uitm.edu.my References: Chingombe, P., Saha, B., Wakeman, R.J., Surface modification and characterisation of a coal-based activated carbon (2005) Carbon, 43, pp. 3132-3143; Monser, L., Adhoum, N., Modified activated carbon for the removal of copper, zinc, chromium and cyanide from wastewater (2002) Sep. Purif. Technol., 26, pp. 137-146; (1980) Carbon Adsorption Handbook, , Cheremisinoff P.N., and Ellerbusch F. (Eds), Ann Arbor Science, Ann Arbor, Michigan; Yang, R.T., (2003) Adsorption, , John Wiley & Sons Inc., Hoboken, New Jersey; Ruthven, D.M., (1984) Principles of Adsorption and Adsorption Process, , Wiley, New York; Kinoshita, K., (1988) Carbon Electrochemical and Physicochemical Properties, , Wiley, New York; Adhoum, N., Monser, L., Removal of cyanide from aqueous solution using impregnated activated carbon (2002) Chem. Eng. Process., 41, pp. 17-21; Leon, L.Y., Solar, C.A., Calemma, J.M., Radovic, L.R., Evidence for the protonation of basal plane sites on carbon (1992) Carbon, 30 (5), pp. 797-811; Seke, M.D., Sandenbergh, R.F., Vegter, N.M., Effects of the textural and surface properties of activated carbon on the adsorption of gold di-cyanide (2000) Miner. Eng., 13 (5), pp. 527-540; Davis, J.A., Leckie, J.O., Surface ionization and complexation at the oxide/water interface. II. Surface properties of amorphous iron oxyhydroxide and adsorption of metals ions (1978) J. Colloid Interface Sci., 67 (1), pp. 90-107; Zhao, N., Na, W., Li, J., Qiao, Z., Jing, C., Fei, H., Surface properties of chemically modified activated carbons for adsorption rate of Cr(VI) (2005) Chem. Eng. J., 115, pp. 133-138; Smisek, M., Cerny, S., (1970) Active Carbon: Manufacture, Properties and Applications, , Elsevier, Amsterdam; Jiang, Z., Liu, Y., Sun, X., Tian, F., Sun, F., Liang, C., You, W., Li, C., Activated carbons chemically modified by concentrated H2SO4 for the adsorption of the pollutants from wastewater and the dibenzothiophene from fuel oils (2003) Langmuir, 19, pp. 731-736; Boehm, H.P., Surface oxides on carbon and their analysis: a critical assessment (2002) Carbon, 40 (2), pp. 145-149; Aggarwal, D., Goyal, M., Bansal, R.C., Adsorption of chromium by activated carbon from aqueous solution (1999) Carbon, 37, pp. 1989-1997; Ali, U.F.M., Aroua, M.K., Daud, W.M.A.W., Modification of a granular palm shell based activated carbon by acid pre-treatment for enhancement of copper adsorption (2004) Proceedings of the Third Technical Postgraduate Symposium (TECHPOS '04) (National Level), pp. 75-79. , 15-16 December, Kuala Lumpur; Alvarez-Merino, M.A., Lopez-Ramon, V., Moreno-Castilla, C., A study of the static and dynamic adsorption of Zn(II) ions on carbon materials from aqueous solutions (2005) J. Colloid Interface Sci., 288, pp. 335-341; Goel, J., Kadirvelu, K., Rajagopal, C., Garg, V.K., Removal of lead(II) by adsorption using treated granular activated carbon: batch and column studies (2005) J. Hazard Mater., B125, pp. 211-220; Gomez-Serrano, V., Macias-Garcia, A., Espinosa-Mansilla, A., Valenzuela-Calahorro, C., Adsorption of mercury, cadmium and lead from aqueous solution on heat-treated and sulphurized activated carbon (1998) Water. Res., 32 (1), pp. 1-4; Goyal, M., Rattan, V.K., Aggarwal, D., Bansal, R.C., Removal of copper from aqueous solutions by adsorption on activated carbons (2001) Colloids Surf., 190, pp. 229-238; Jia, Y.F., Thomas, K.M., Adsorption of cadmium ions on oxygen surface sites in activated carbon (2000) Langmuir, 16, pp. 1114-1122; Kikuchi, Y., Qian, Q.R., Machida, M., Tatsumoto, H., Effect of ZnO loading to activated carbon on Pb(II) adsorption from aqueous solution (2006) Carbon, 44, pp. 195-202; Lee, D.S., Hong, S.H., Paek, K.H., Ju, W.T., Adsorbability enhancement of activated carbon by dielectric barrier discharge plasma treatment (2005) Surf. Coat. Technol., 200, pp. 2277-2282; Li, Y.H., Lee, C.W., Gullet, B.K., Importance of activated carbon's oxygen surface functional groups on elemental mercury adsorption (2003) Fuel, 82, pp. 451-457; Macias-Garcia, A., Gomez-Serrano, V., Alexandre-Franco, M.F., Valenzuela-Calahorro, C., Adsorption of cadmium by sulphur dioxide treated activated carbon (2003) J. Hazard. Mater., B103, pp. 141-152; Park, S.J., Jang, Y.S., Pore structure and surface properties of chemically modified activated carbons for adsorption mechanism and rate of Cr(IV) (2002) J. Colloid Interface Sci., 249, pp. 458-463; Rivera-Utrilla, J., Sanchez-Polo, M., Adsorption of Cr(III) on ozonised activated carbon: importance of C�-cation interactions (2003) Water Res., 37, pp. 3335-3340; Tai, M.H., Saha, B., Streat, M., Sorption performance of activated carbon after oxidation and subsequent treatments (1999) Proceedings of the 24th Biennial Conference on Carbon, pp. 470-471. , Charleston, South Carolina, 11-16th July; Ucer, A., Uyanik, A., Cay, S., Ozkan, Y., Immobilisation of tannic acid onto activated carbon to improve Fe(III) adsorption (2005) Sep. Purif. Technol., 44, pp. 11-17; Ucer, A., Uyanik, A., Aygun, S.F., Adsorption of Cu(II), Cd(II), Zn(II), Mn(II) and Fe(III) ions by tannic acid immobilised activated carbon (2006) Sep. Purif. Technol., 47, pp. 13-118; Vladimir, S.J., Malik, D., Characterization and metal sorptive properties of oxidized active carbon (2002) J. Colloid Interface Sci., 250, pp. 213-220; Yantasee, W., Lin, Y.H., Fryxell, G.E., Alford, K.L., Busche, B.J., Johnson, C.D., Selective removal of copper(II) from aqueous solutions using fine-grained activated carbon functionalised with amine (2004) Ind. Eng. Chem. Res., 43, pp. 2759-2764; Wu, S.N., Chen, P.J., Modification of a commercial activated carbon for metal adsorption by several approaches (2001) Proceedings of the 2001 International Containment & Remediation Technology Conference and Exhibition, , 10-13 June, Orlando, Florida; Rios, R.R.V.A., Alves, D.E., Dalmazio, I., Fernando, S., Bento, V., Donnici, C.L., Lago, R.M., Tailoring activated carbon by surface chemical modification with O, S and N containing molecules (2003) Mater. Res., 6 (2), pp. 129-135; Barton, S.S., Evans, M.J.B., Halliop, E., MacDonald, J.A.F., Acidic and basic sites on the surface of porous carbon (1997) Carbon, 35 (9), pp. 1361-1366; Hoang, H.B., Abanto-Chavez, H.J., Kozhemyakina, I.A., Hoang, K.B., Temkin, O.N., Adsorption of Zn(OAc)2 from aqueous solutions on the surface of activated carbons modified with acetic acid (2003) Russ. J. Appl. Chem., 76 (9), pp. 1418-1422; Domingo-Garcia, M., Lopez-Garzon, F.J., Perez-Mendoza, M., Effect of some oxidation treatment on the textural characteristics and surface chemical nature of an activated carbon (2000) J. Colloid Interface Sci., 222, pp. 233-240; Marato-Valer, M.M., Dranca, I., Lupascu, T., Nastas, R., Effect of adsorbate polarity on thermodesorption profiles from oxidized and metal-impregnated activated carbons (2004) Carbon, 42, pp. 2655-2659; Aburub, A., Wurster, D.E., Phenobarbital interactions with derivatized activated carbon surfaces (2006) J. Colloid Interface Sci., 296, pp. 79-85; Garcia, A.B., Martinez-Alonso, A., Leon, C.A.L.Y., Tascon, J.M.D., Modification of the surface properties of an activated carbon by oxygen plasma treatment (1998) Fuel, 77, pp. 613-624; Santiago, M., Stuber, F., Fortuny, A., Fabregat, A., Font, J., Modified activated carbons for catalytic wet air oxidation of phenol (2005) Carbon, 43, pp. 2134-2145; Terzyk, A.P., Further insights in to the role of carbon surface functionalities in the mechanism of phenol adsorption (2003) J. Colloid Interface Sci., 268, pp. 301-329; Chiang, H.L., Huang, C.P., Chiang, P.C., The surface characteristics of activated carbon as affected by ozone and alkaline treatment (2002) Chemosphere, 47, pp. 257-265; Chen, W., Cannon, F.S., Rangel-Mendez, J.R., Ammonia-tailoring of GAC to enhance perchlorate removal, I: characterization of NH3 thermally tailored GACs (2005) Carbon, 43, pp. 573-580; Chen, W., Cannon, F.S., Rangel-Mendez, J.R., Ammonia-tailoring of GAC to enhance perchlorate removal. II: perchlorate adsorption (2005) Carbon, 43, pp. 581-590; Adhoum, N., Monser, L., Removal of phthalate on modified activated carbon: application to the treatment of industrial wastewater (2004) Sep. Purif. Technol., 38, pp. 233-239; Rajakovic, L.V., Ristic, M.D., Sorption of boric acid and borax by activated carbon impregnated with various compounds (1996) Carbon, 34 (6), pp. 769-774; Sayan, E., Ultrasound-assisted preparation of activated carbon from alkaline impregnated hazelnut shell: An optimisation study on removal of Cu2+ from aqueous solution (2006) Chem. Eng. J., 115, pp. 213-218; Fan, H.J., Anderson, P.R., Copper and cadmium removal by Mn oxide-coated granular activated carbon (2005) Sep. Purif. Technol., 45, pp. 61-67; Huang, C.P., Vane, L.M., Enhancing As5+ removal by a Fe2+-treated activated carbon (1989) J. Water Pollut. Contam. Fed., 61 (9), pp. 1596-1603; Leyva Ramos, R., Ovalle-Turrubiartes, J., Sanchez-Castillo, M.A., Adsorption of fluoride from aqueous solution on aluminium-impregnated carbon (1999) Carbon, 37, pp. 609-617; Dastgheib, S.A., Karanfil, T., Wei, C., Tailoring activated carbons for enhanced removal of natural organic matter from natural waters (2004) Carbon, 42, pp. 547-557; Ghorishi, S.B., Keeney, R.M., Development of a Cl-impregnated activated carbon for entrained-flow capture of elemental mercury (2002) Environ. Sci. Technol., 36 (20), pp. 4454-4459; Hu, S.W., Pendleton, P., Adsorption of anionic surfactant by activated carbon: effect of surface chemistry, ionic strength and hydrophobicity (2001) J. Colloid Interface Sci., 243, pp. 306-315; Xiao, J.X., Zhang, Y., Wang, C., Zhang, J., Wang, C.M., Bao, Y.X., Zhao, Z.G., Adsorption of cationic-anionic surfactant mixtures on activated carbon (2005) Carbon, 43, pp. 1032-1038; Gonzalez-Garcia, C.M., Gonzalez-Martin, M.L., Gomez-Serrano, V., Bruque, J.M., Labajos-Broncano, L., Analysis of the adsorption isotherms of a non-ionic surfactant from aqueous solution onto activated carbons (2001) Carbon, 39, pp. 849-855; Gonzalez-Garcia, C.M., Gonzalez-Martin, M.L., Denoyel, R., Gallardo-Moreno, A.M., Labajos-Broncano, L., Bruque, J.M., Ionic surfactant adsorption onto activated carbons (2004) J. Colloid Interface Sci., 278, pp. 257-264; Gonzalez-Garcia, C.M., Gonzalez-Martin, M.L., Gonzalez, J.F., Sabio, E., Ramiro, A., Ganan, J., Nonionic surfactants adsorption onto activated carbon: influence of the polar chain length (2004) Powder Technol., 148, pp. 32-37; Parette, R., Cannon, F.S., The removal of perchlorate from groundwater by activated carbon tailored with cationic surfactants (2005) Water Res., 39, pp. 4020-4028; Garcia-Martin, J., Lopez-Garzon, R., Godino-Salido, M.L., Gutierrez-Volero, M.D., Arranz-Mascaros, P., Cuesta, R., Carrasco-Marin, F., Ligand adsorption on an activated carbon for the removal of chromate ions from aqueous solutions (2005) Langmuir, 21, pp. 6908-6914; Torregrosa-Macia, R., Martin-Martinez, J.M., Mittelmeijer-Hazeleger, M.C., Porous texture of activated carbons modified with carbohydrates (1997) Carbon, 35 (4), pp. 447-453; Attia, A.A., Rashwan, W.E., Khedr, S.A., Capacity of activated carbon in the removal of acid dyes subsequent to its thermal treatment (2006) Dyes Pigment, 69, pp. 128-136; Chiang, H.L., Chiang, P.C., Huang, C.P., Ozonation of activated carbon and its effects on the adsorption of VOCs exemplified by methylethylketone and benzene (2002) Chemosphere, 47, pp. 267-275; Rangal-Mendez, J.R., Cannon, F.S., Improved activated carbon by thermal treatment in methane and steam: physicochemical influences on MIB sorption capacity (2005) Carbon, 43, pp. 467-479; Yoo, J.W., Kim, S.J., Kim, T.Y., Cho, S.Y., Rho, S.G., Adsorption and desorption characteristics of maltooligosaccharide for the surface treated activated carbon (2005) Adsorption, 11, pp. 719-723; Villacanas, F., Pereira, M.F.R., Orfao, J.J.M., Figueiredo, J.L., Adsorption of simple aromatic compounds on activated carbons (2006) J. Colloid Interface Sci., 293, pp. 128-136; Haydar, S., Ferro-Garcia, M.A., Rivera-Utrilla, J., Joly, J.P., Adsorption of p-nitrophenol on an activated carbon with different oxidations (2003) Carbon, 41, pp. 387-395; Terzyk, A.P., Molecular properties and intermolecular forces-factors balancing the effect of carbon surface chemistry in adsorption of organics from dilute aqueous solutions (2004) J. Colloid Interface Sci., 275, pp. 9-29; Franz, M., Arafat, H.A., Pinto, N.G., Effect of chemical surface heterogeneity on the adsorption mechanism of dissolved aromatics on activated carbon (2000) Carbon, 38, pp. 1807-1819; Daifullah, A.A.M., Girgis, B.S., Impact of surface characteristics of activated carbon on adsorption of BTEX (2003) Colloids Surf. A, 214, pp. 181-193; Alvarez, P.M., Garcia-Araya, J.F., Beltran, F.J., Masa, F.J., Medina, F., Ozonation of activated carbons: effect on the adsorption of selected phenolic compounds from aqueous solutions (2005) J. Colloid Interface Sci., 283, pp. 503-512; Pendleton, P., Wong, S.H., Schumann, R., Levay, G., Denoyel, R., Rouquerol, J., Properties of activated carbon controlling 2-methylisoborneol adsorption (1997) Carbon, 35 (8), pp. 1141-1149; Li, L., Quinlivan, P.A., Knappe, D.R.U., Effects of activated carbon surface chemistry and pore structure on the adsorption of organic contaminants from aqueous solution (2002) Carbon, 40, pp. 2085-2100; Nevskaia, D.M., Santianes, A., Munoz, V., Guerrero-Ruiz, A., Interaction of aqueous solutions of phenol with commercial activated carbons: an adsorption and kinetic study (1999) Carbon, 37, pp. 1065-1074; Considine, R., Denoyel, R., Pendleton, P., Schumann, R., Wong, S.H., The influence of surface chemistry on activated carbon adsorption of 2-methylisoborneol from aqueous solution (2001) Colloids Surf. A, 179, pp. 271-280; Salame, I.I., Bandosz, T.J., Role of surface chemistry in adsorption of phenol on activated carbons (2003) J. Colloid Interface Sci., 264, pp. 307-312; Leng, C.C., Pinto, N.G., Effects of surface properties of activated carbons on adsorption behaviour of selected aromatics (1997) Carbon, 35 (9), pp. 1375-1385; Mahajan, O.P., Moreno-Castilla, C., Walker, P.L.J., Surface treated activated carbon for removal of phenol from water (1980) Sep. Sci. Technol., 15, pp. 1733-1740; Rivera-Utrilla, J., Sanchez-Polo, M., Carrasco-Marin, F., Adsorption of 1,3,6-naphthalenetrisulfonic acid on activated carbon in the presence of Cd(II), Cr(III) and Hg(II): importance of electrostatic interactions (2003) Langmuir, 19, pp. 10857-10861; El-Sayed, Y., Bandosz, T.J., Role of surface oxygen groups in incorporation of nitrogen to activated carbons via ethylmethylamine adsorption (2005) Langmuir, 21, pp. 1282-1289; Nouri, S., Haghseresht, F., Adsorption of p-nitrophenol in untreated and treated activated carbon (2004) Adsorption, 10, pp. 79-86; Adam, O., Bitschene, M., Torri, G., De Giorgi, F., Badot, P.M., Crini, G., Studies on adsorption of propiconazole on modified carbons (2005) Sep. Purif. Technol., 46, pp. 11-18; Faria, P.C.C., Orfao, J.J.M., Pereira, M.F.R., Adsorption of anionic and cationic dyes on activated carbons with different surface chemistries (2004) Water Res., 38, pp. 2043-2052; Valdes, H., Sanchez-Polo, M., Rivera-Utrilla, J., Zaror, C.A., Effect of ozone treatment on surface properties of activated carbon (2002) Langmuir, 18, pp. 2111-2116; Wang, S., Zhu, Z.H., Coomes, A., Haghseresht, F., Lu, G.Q., The physical and surface chemical characteristics of activated carbons and the adsorption of methylene blue from wastewater (2005) J. Colloid Interface Sci., 284, pp. 440-446; Abu-Salah, K., Shelef, G., Levanon, D., Armon, R., Dosoretz, C.G., Microbial degradation of aromatic and polyaromatic toxic compounds adsorbed on powdered activated carbon (1996) J. Biotechnol., 51, pp. 265-272; Walker, G.M., Weatherley, L.R., Biological activated carbon treatment of industrial wastewater in stirred tank reactors (1999) Chem. Eng. J., 75, pp. 201-206; Rivera-Utrilla, J., Bautista-Toledo, I., Ferro-Garcia, M.A., Moreno-Castilla, C., Bioads |
| Uncontrolled Keywords: | Activated carbon modification; Aqueous solution; Contaminant; Impregnation; Surface functional groups; Acidity; Chemical modification; Impurities; Solutions; Surface active agents; Wastewater treatment; Carbon adsorption; Contaminant removal; Activated carbon. |
| Subjects: | T Technology > TA Engineering (General). Civil engineering (General) T Technology > TP Chemical technology |
| Divisions: | Faculty of Engineering |
| Depositing User: | Mr Jenal S |
| Date Deposited: | 17 Jul 2013 02:33 |
| Last Modified: | 08 Nov 2017 08:33 |
| URI: | http://eprints.um.edu.my/id/eprint/7461 |
Actions (login required)
 |
View Item |
