Sivakumar, S. and Ramesh, Singh and Chin, K.L. and Tan, C.Y. and Teng, W.D. (2011) Effect of sintering profiles on the properties and ageing resistance of Y-TZP ceramic. International Journal of Automotive and Mechanical Engineering, 4. pp. 405-413. ISSN 2229-8649, DOI https://doi.org/10.15282/ijame.4.2011.3.0033.
Full text not available from this repository.Abstract
A commercially available Y-TZP ceramic powder was fabricated under four different sintering profiles in order to investigate the effects of conventional single-stage sintering (SSS) with dwell times of 1 min and 2 h, respectively, compared with two-stage sintering (TSS), on the physical and mechanical properties of Y-TZP. Sintering was performed up to 1400oC at a ramp rate of 10oC/min. It was revealed that samples sintered via TSS yielded better properties than the SSS samples sintered at 1400oC using a dwell time of 2 h. In the hydrothermal ageing test, TSS samples did not undergo low-temperature degradation via the tetragonal to monoclinic phase transformation. Nevertheless, it was found by XRD analysis that Y-TZP ceramics sintered by the SSS method using a short dwell time of 1 min were effective in maintaining tetragonal phase stability after 50 h of exposure to superheated steam conditions.
| Item Type: | Article |
|---|---|
| Funders: | UNSPECIFIED |
| Additional Information: | you can e-mail to me for the full text of my jurnal at ramesh79@um.edu.my |
| Uncontrolled Keywords: | Single-stage sintering; Two-stage sintering; Mechanical properties; Y-TZP |
| Subjects: | T Technology > TS Manufactures |
| Divisions: | Faculty of Engineering |
| Depositing User: | Mr. Mohammed Salim Abd Rahman |
| Date Deposited: | 03 Jul 2013 02:32 |
| Last Modified: | 12 Feb 2020 04:14 |
| URI: | http://eprints.um.edu.my/id/eprint/6562 |
Actions (login required)
 |
View Item |
