 | Up a level |
Ab Karim, Mohd Sayuti and Aly Diaa Mohammed Sarhan, Ahmed and Abd Shukor, Mohd Hamdi (2011) Experimental study on minimizing edge chipping in glass milling operation using an internal CBN grinding tool. Materials and Manufacturing Processes, 26 (8). pp. 969-976. ISSN 1042-6914,
Ab Karim, Mohd Sayuti and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2013) Surface quality improvement in CNC end milling of aluminum alloy using nanolubrication system. Springer, pp. 669-683.
Abd Shukor, Mohd Hamdi and Ektessabi, Ari-Ide (2006) Calcium phosphate coatings: a comparative study between simultaneous vapor deposition and electron beam deposition techniques. Surface and Coatings Technology, 201 (6). pp. 3123-3128. ISSN 0257-8972,
Abd Shukor, Mohd Hamdi and Ide-Ektessabi, A. (2007) Dissolution behavior of simultaneous vapor deposited calcium phosphate coatings in vitro. Materials Science and Engineering: C, 27 (4). pp. 670-674. ISSN 0928-4931,
Abd Shukor, Mohd Hamdi and Ide-Ektessabi, A. and Toque, J.A. (2007) In vitro study of electron beam deposited calcium phosphate coating in simulated body fluid. Journal of Materials Research, 22 (03). pp. 621-626. ISSN 0884-2914,
Abd Shukor, Mohd Hamdi and Toque, J.A. and Ide-Ektessabi, A. (2010) Wear characteristics and adhesion behavior of calcium phosphate thin-films. Key Engineering Materials, 443. pp. 469-474. ISSN 0878492674,
Abdul Mutalib, M.I. and Dahari, M. and Hisam, N.A. and Ramlan, R. (2009) Use of suitable equation of state for the conversion of volumetric to mass flowrate in ngv refueling measurement. Journal-The Institution of Engineers, Malaysia, 7 (2). pp. 5-12.
Abdul-Wahab, Ahmad Khairi and Hussain, Mohd Azlan and Omar, Rosli (2009) Development of PARS-EX pilot plant to study control strategies. Control Engineering Practice, 17 (10). pp. 1220-1233. ISSN 0967-0661, DOI https://doi.org/10.1016/j.conengprac.2009.05.008.
Abdulwahid, Rebar T. and Aziz, Shujahadeen B. and Brza, M.A. and Kadir, Mohd Fakhrul Zamani and Karim, Wrya O. and Hamsan, H.M. and Asnawi, Ahmad S.F.M. and Abdullah, Ranjdar M. and Nofal, Muaffaq M. and Dannoun, Elham M.A. (2021) Electrochemical performance of polymer blend electrolytes based on chitosan: dextran: impedance, dielectric properties, and energy storage study. Journal of Materials Science: Materials in Electronics, 32 (11). pp. 14846-14862. ISSN 0957-4522, DOI https://doi.org/10.1007/s10854-021-06038-7.
Abou-El-Hossein, K.A. and Kadirgama, K. and Abd Shukor, Mohd Hamdi and Benyounis, K.Y. (2007) Prediction of cutting force in end-milling operation of modified AISI P20 tool steel. Journal of Materials Processing Technology, 182 (1). pp. 241-247.
Adibi, H. and Rezaei, S.M. and Sarhan, Ahmed A.D. (2013) Analytical modeling of grinding wheel loading phenomena. The International Journal of Advanced Manufacturing Technology. pp. 1-13. ISSN 0268-3768,
Adzila, S. and Sopyan, I. and Abd Shukor, Mohd Hamdi (2012) Mechanochemical synthesis of hydroxyapatite nanopowder: effects of rotation speed and milling time on powder properties. Applied Mechanics and Materials, 110. pp. 3639-3644. ISSN 3037852623,
Adzila, S. and Sopyan, I. and Farius, S. and Wahab, N. and Singh, R. (2013) Mechanochemical synthesis of hydroxyapatite bioceramics through two different milling media. Key Engineering Materials, 531. pp. 254-257.
Ahmad, J. and Rahman, M.M. and Zuhairi, M.H.A. and Ramesh, S. and Hassan, M.A. and Purbolaksono, J. (2012) High operating steam pressure and localized overheating of a primary superheater tube. Engineering Failure Analysis, 26. pp. 344-348. ISSN 1350-6307,
Akhavan, A. and Abd Shukor, Mohd Hamdi and Jabbari, N. (2013) The evaluation of EOR methods for a heavy-oil reservoir with the AHP method: The case of ferdowsi reservoir. Petroleum Science and Technology, 31 (3). pp. 267-275. ISSN 1091-6466,
Ale Ebrahim, N. (2015) Virtual R&D teams: A new model for product development. International Journal of Innovation, 3 (2). pp. 1-27. ISSN 2318-9975, DOI https://doi.org/10.5585/iji.v3i2.43.
Amindoust, A. and Ahmed, S. and Saghafinia, A. (2012) A taxonomy and review on supplier selection methods under uncertainty. Science, 7 (1). ISSN 1095-9203,
Amindoust, A. and Ahmed, S. and Saghafinia, A. and Bahreininejad, A. (2012) Sustainable supplier selection: a ranking model based on fuzzy inference system. Applied Soft Computing, 12 (6). pp. 1668-1677. ISSN 1568-4946,
Amiriyan, M. and Chew, W.J. and Ramesh, S. and Tolouei, R. and Hassan, M.A. and Hossain, A. and Sopyan, I. and Meenaloshini, S. (2012) Mechanical and electrical properties of Y-TZP/ZrB2 composite. Advanced Materials Research, 576. pp. 228-231.
Amiriyan, M. and Satgunam, M. and Sivakumar, S. and Singh, R. and Tolouei, R. (2012) Sinterability and mechanical properties of MnO2-doped Y-TZP: the effects of holding time variations. Applied Mechanics and Materials, 110-11 . 2nd International Conference on Mechnaical and Aerospace Engineering (ICMAE 2011), pp. 1284-1288.
Amiriyan, M. and Singh, R. and Sopyan, I. and Satgunam, M. and Tolouei, R. and Dung, T.W. (2011) Pressureless sintering of electro-conductive zirconia composites. Materials Science Forum, 694 . Engineering, pp. 304-308.
Babaei, A. and Faraji, G. and Mashhadi, M.M. and Abd Shukor, Mohd Hamdi (2012) Repetitive forging (RF) using inclined punches as a new bulk severe plastic deformation method. Materials Science and Engineering: A, 558. pp. 150-157. ISSN 0921-5093,
Baradaran, Saied and Basirun, Wan Jefrey and Mahmoudian, Mohammad Reza and Abd Shukor, Mohd Hamdi and Alias, Yatimah (2013) Synthesis and characterization of monetite prepared using a sonochemical method in a mixed solvent system of Water/Ethylene Glycol/N, N-Dimethylformamide. Metallurgical and Materials Transactions A, 44 (5). pp. 2331-2338. ISSN 1073-5623, DOI https://doi.org/10.1007/s11661-012-1595-5.
Bushroa, Abdul Razak and Azmi, N.A. and Mahmoodian, Reza and Abd Shukor, Mohd Hamdi and Gupta, V. and Wasa, K. (2016) An Energy Star Physical Vapor Deposition (PVD) Machine. In: International Conference on Knowledge Transfer, 1-3 December 2015, Putrajaya, Malaysia.
Chong, W. S. and Gan, S. X. and Lai, C. K. and Chong, Wu Yi and Choi, D. and Madden, S. and De La Rue, R. M. and Ahmad, H. (2020) Configurable TE- and TM-Pass Graphene Oxide-Coated Waveguide Polarizer. IEEE Photonics Technology Letters, 32 (11). pp. 627-630. ISSN 1041-1135, DOI https://doi.org/10.1109/LPT.2020.2988591.
Dahari, M. and Liu, Y. (2012) A review of auto-guided-vehicles routing algorithms. Advanced Materials Research, 479. pp. 443-456.
Dahari, M. and Tan, J.D. (2011) Forward and inverse kinematics model for robotic welding process using KR-16KS KUKA robot. Science. pp. 1-6. ISSN 1095-9203, DOI https://doi.org/10.1109/ICMSAO.2011.5775598.
Dharma, I. and Budi, Gusti Bagus and Abd Shukor, Mohd Hamdi and Ariga, Tadashi (2009) Wettability of low silver content lead-free solder alloy. Materials transactions, 50 (5). pp. 1135-1138. ISSN 1347-5320,
Dharma, I.G.B. and Abd Shukor, Mohd Hamdi and Ariga, T. (2009) The effects of adding silver and indium to lead-free solders. Welding Journal, 88 (4). pp. 45-48. ISSN 0043-2296,
Dou, Zixin and Sun, Yanming and Wang, Tao and Wan, Huiyin and Fan, Shiqi (2021) Exploring regional advanced manufacturing and its driving factors: A case study of the Guangdong-Hong Kong-Macao greater bay area. International Journal of Environmental Research and Public Health, 18 (11). ISSN 1660-4601, DOI https://doi.org/10.3390/ijerph18115800.
Elsayed, B.A. and Hassan, Mohamed Mohsen Abdel-Naeim and Mekhilef, Saad (2013) Decoupled third-order fuzzy sliding model control for cart-inverted pendulum system. Applied Mathematics & Information Sciences, 7 (1). pp. 193-201. ISSN 1935-0090,
Endut, Z. and Abd Shukor, Mohd Hamdi and Basirun, Wan Jefrey (2012) Supercapacitance of bamboo-type anodic titania nanotube arrays. Surface and Coatings Technology. ISSN 0257-8972,
Endut, Zulkarnain and Basirun, Wan Jefrey and Abd Shukor, Mohd Hamdi (2012) Pseudocapacitive performance of vertical copper oxide nanoflakes. Thin Solid Films, 528. pp. 213-216. ISSN 0040-6090, DOI https://doi.org/10.1016/j.tsf.2012.09.084.
Ezazi, M.A. (2015) The employment of advanced fiber laser technology to weld dissimilar materials: Stainless steel and aluminum alloy using pre-placed powder-based activating flux and filler. Masters thesis, University of Malaya.
Fadli, A. and Sopyan, I. and Ramesh, S. (2012) Porous alumina from protein foaming-consolidation method containing hydrothermal derived hydroxyapatite powder. Applied Mechanics and Materials, 117-11. pp. 782-785. ISSN 3037852801,
Faraji, G. and Abrinia, K. and Mashhadi, M.M. and Abd Shukor, Mohd Hamdi (2012) An upper-bound analysis for frictionless TCAP process. Archive of Applied Mechanics. pp. 1-11. ISSN 0939-1533,
Farhan, M.S. and Zalnezhad, E. and Bushroa, A.R. (2013) Investigation of optical and structural properties of ion-assisted deposition (IAD) ZrO2 thin films. International Journal of Precision Engineering and Manufacturing, 14 (11). pp. 1997-2002. ISSN 2234-7593, DOI https://doi.org/10.1007/s12541-013-0271-z.
Ghafarirad, H. and Rezaei, S.M. and Zareinejad, M. and Abd Shukor, Mohd Hamdi (2011) A robust adaptive control for micro-positioning of piezoelectric actuators with environment force estimation. Transactions of the Institute of Measurement and Control. ISSN 0142-3312,
Ghani, A.R.A. and Hassan, Mohamed Mohsen Abdel-Naeim and Taha, Z. and Hamdi, M. (2012) Effect of slot geometry on the impact response of square column. Advanced Science Letters, 13 (1). pp. 1-7. ISSN 1936-6612,
Gurumoorthy, Narmatha and Nordin, Fazlina and Tye, Gee Jun and Wan Kamarul Zaman, Wan Safwani and Ng, Min Hwei (2022) Non-integrating Lentiviral vectors in clinical applications: A glance through. Biomedicines, 10 (1). ISSN 2227-9059, DOI https://doi.org/10.3390/biomedicines10010107.
Hamdan, A. and Fadzil, M. and Abou-El-Hossein, K.A. and Abd Shukor, Mohd Hamdi (2011) Performance evaluation of different types of cutting fluid in the machining of aisi 01 hardened steel using pulsed jet minimal quantity lubrication system. ASEAN Engineering Journal, 1 (1). pp. 1-9. ISSN 2229-127X,
Hamdan, Ahmad and Sarhan, Ahmed AD and Abd Shukor, Mohd Hamdi (2012) An optimization method of the machining parameters in high-speed machining of stainless steel using coated carbide tool for best surface finish. The International Journal of Advanced Manufacturing Technology, 58 (1-4). pp. 81-91. ISSN 0268-3768,
Hamid, S. and Leen, Y.M. and Pei, S.H. (2008) Measuring the performance and excellence of academicians through the e-balanced scorecard (e-BSC). In: International Business Information Management Association Conference, 4-6 Jan 2008, Marrakech, Morocco.
Hassan, M. and Sadri, R. and Ahmadi, G. and Dahari, M.B. and Kazi, S.N. and Safaei, M.R. and Sadeghinezhad, E. (2013) Numerical study of entropy generation in a flowing nanofluid used in micro-and minichannels. Entropy, 15 (1). pp. 144-155.
Hassan, M.A. and Abouel-Kasem, A. and El-Sharief, M.A. and Yusof, F. (2012) Evaluation of the material constants of Nitrile Butadiene Rubbers (NBR) with different Carbon Black loading (CB): FE-simulation and experimental. Polymer. ISSN 0032-3861,
Hassan, M.A. and Ahmed, K.I.E. and Takakura, N. (2011) A developed process for deep drawing of metal foils square cups. Journal of Materials Processing Technology.
Hassan, M.A. and Hino, K. and Takakura, N. and Yamaguchi, K. (2002) Friction aided deep drawing of sheet metals using polyurethane ring and auxiliary metal punch. Part 2: analysis of the drawing mechanism and process parameters. International Journal of Machine Tools and Manufacture, 42 (5). pp. 633-642. ISSN 0890-6955,
Hassan, M.A. and Kanno, I. and Kotera, H. (2006) Compound two-dimensional thermo-elastic and thermodynamic analysis for axis-oriented epitaxial lead titanate thin films. Vacuum, 81 (4). pp. 459-465. ISSN 0042-207X,
Hassan, M.A. and Suenaga, R. and Takakura, N. and Yamaguchi, K. (2005) A novel process on friction aided deep drawing using tapered blank holder divided into four segments. Journal of Materials Processing Technology, 159 (3). pp. 418-425. ISSN 0924-0136,
Hassan, M.A. and Takakura, N. and Yamaguchi, K. (2002) Friction aided deep drawing of sheet metals using polyurethane ring and auxiliary metal punch. Part 1: experimental observations on the deep drawing of aluminium thin sheets and foils. International Journal of Machine Tools and Manufacture, 42 (5). pp. 625-631. ISSN 0890-6955,
Hassan, M.A. and Takakura, N. and Yamaguchi, K. (2003) Friction aided deep drawing using newly developed blank-holder divided into eight segments. International Journal of Machine Tools and Manufacture, 43 (6). pp. 637-646. ISSN 0890-6955,
Hassan, M.A. and Takakura, N. and Yamaguchi, K. (2003) A novel technique of friction aided deep drawing using a blank-holder divided into four segments. Journal of Materials Processing Technology, 139 (1). pp. 408-413. ISSN 0924-0136,
Hassan, Mohamed Mohsen Abdel-Naeim and El-Sebaie, Mohamed Gad and Yamaguchi, K. (2001) An improved punch friction test in sheet metal forming. Journal of the Japan Society for Technology of Plasticity, 42 (480). pp. 31-37. ISSN 0038-1586,
Hassan, Mohamed Mohsen Abdel-Naeim and El-Sharief, Mahmoud A. and Aboul-Kasem, Ahmed and Ramesh, Singh and Purbolaksono, Judha (2012) A fuzzy model for evaluation and prediction of slurry erosion of 5127 steels. Materials & Design, 39. pp. 186-191. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2012.02.012.
Hassan, Mohamed Mohsen Abdel-Naeim and Hamdi, M. and Naderi, S. and Zahedi, F. (2012) Effect of curvature and thickness of aluminum shells on the energy absorption in low velocity impact. Advanced Materials Research, 488. pp. 40-45. ISSN 3037853824,
Hassan, Mohamed Mohsen Abdel-Naeim and Hamdi, M. and Noma, A. (2012) The nonlinear elastic and viscoelastic passive properties of left ventricular papillary muscle of a guinea pig heart. Journal of the Mechanical Behavior of Biomedical Materials, 5 (1). pp. 99-109. ISSN 1751-6161,
Hassan, Mohamed Mohsen Abdel-Naeim and Saleh, M.A.E. and Takakura, Norio and Ramesh, Singh and Purbolaksono, Judha (2012) Effect of bulge shape on wrinkling formation and strength of stainless steel thin sheet. Materials & Design, 42. pp. 37-45. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2012.05.035.
Hatanaka, N. and Iizuka, T. and Takakura, N. and Yamaguchi, K. and Hassan, M.A. (2010) Friction aided deep drawing of aluminum sheet using blank holder divided into four segments. Keikinzoku/Journal of Japan Institute of Light Metals, 60 (7). pp. 315-320. ISSN 1880-8018,
Herliansyah, M.K. and Abd Shukor, Mohd Hamdi and Ide-Ektessabi, A. and Wildan, M.W. and Toque, J.A. (2009) The influence of sintering temperature on the properties of compacted bovine hydroxyapatite. Materials Science and Engineering: C, 29 (5). pp. 1674-1680. ISSN 0928-4931,
Hezam, L.M.A. and Hassan, M.A. and Hassab-Allah, I.M. and El-Sebaie, M.G. (2009) Development of a new process for producing deep square cups through conical dies. International Journal of Machine Tools and Manufacture, 49 (10). pp. 773-780. ISSN 0890-6955,
Ichikawa, Y. and Matsunaga, T. and Hassan, M. and Kanno, I. and Suzuki, T. and Wasa, K. (2006) Growth and structure of heteroepitaxial lead titanate thin films constrained by miscut strontium titanate substrates. Journal of Materials Research, 21 (05). pp. 1261-1268. ISSN 0884-2914,
Ishtiaq, Uzair and Kareem, Sameem Abdul and Mohd Faizal Abdullah, Erma Rahayu and Mujtaba, Ghulam and Jahangir, Rashid and Ghafoor, Hafiz Yasir (2020) Diabetic retinopathy detection through artificial intelligent techniques: a review and open issues. Multimedia Tools and Applications, 79 (21-22). pp. 15209-15252. ISSN 1380-7501, DOI https://doi.org/10.1007/s11042-018-7044-8.
Jameel, Mohammed and Islam, A.B.M. and Hussain, Raja Rizwan and Hasan, Syed Danish and Khaleel, M. (2013) Non-linear FEM analysis of seismic induced pounding between neighbouring multi-storey structures. Latin American Journal of Solids and Structures, 10 (5). pp. 921-939. ISSN 1679-7825,
Kanapathy, K. and Dekkers, R. (2014) Comparing Malaysian and Scottish firms on practices for strategic capability management. In: IEEM 2014 The leee International Conference On Industrial Engineering And Engineering Management, 09-12 Dec 2014, Selangor. (Submitted)
Khalil, Ibrahim and Yehye, Wageeh A. A. and Nurhidayatullaili, Muhd Julkapli and Sina, Abu Ali Ibn and Rahmati, Shahrooz and Basirun, Wan Jefrey and Seyfoddin, Ali (2020) Dual platform based sandwich assay surface-enhanced Raman scattering DNA biosensor for the sensitive detection of food adulteration. Analyst, 145 (4). pp. 1414-1426. ISSN 0003-2654, DOI https://doi.org/10.1039/c9an02106j.
Khyrun, S. M. Fathima and Christy, A. Jegatha and Usha, R. and Nehru, L. C. and Suresh, Sagadevan (2023) Novel solution combustion synthesis of CeO2/CuO nanocomposite for photocatalytic and biological applications. Optical Materials, 139. ISSN 0925-3467, DOI https://doi.org/10.1016/j.optmat.2023.113756.
Lee, K.Y. and Chin, K.M. and Ramesh, S. and Tan, C.Y. and Teng, W.D. and Sopyan, I. (2012) Characterization of forsterite bioceramics. Advanced Materials Research, 576. pp. 195-198.
Lee, K.Y. and Chin, K.M. and Ramesh, Singh and Tan, C.Y. and Hassan, M.A. and Purbolaksono, J. and Teng, W.D. and Sopyan, I. (2012) Effect of ultrasonication on synthesis of forsterite ceramics. Advanced Materials Research, 576. pp. 252-255. ISSN 1022-6680, DOI https://doi.org/10.4028/www.scientific.net/AMR.576.252.
Lee, Xin Jiat and Hiew, Yan Zhang and Lai, Kar Chiew and Tee, Wan Ting and Thangalazhy-Gopakumar, Suchithra and Gan, Suyin and Lee, Lai Yee (2021) Evaluation of industrial palm oil sludge as an effective green adsorbing substrate for toxic aqueous cadmium removal. Materials Science for Energy Technologies, 4. pp. 224-235. ISSN 2589-2991, DOI https://doi.org/10.1016/j.mset.2021.06.002.
Li, L. and Kim, J.H. and Shukor, M.H.A. (2005) Grit blast assisted laser milling/grooving of metallic alloys. CIRP Annals-Manufacturing Technology, 54 (1). pp. 183-186. ISSN 0007-8506,
Liu, Jingjing and Abu Osman, Noor Azuan and Al Kouzbary, Mouaz and Al Kouzbary, Hamza and Abd Razak, Nasrul Anuar and Shasmin, Hanie Nadia and Arifin, Nooranida (2022) Optimization and comparison of typical elastic actuators in powered ankle-foot prosthesis. International Journal of Control Automation and Systems, 20 (1). pp. 232-242. ISSN 1598-6446, DOI https://doi.org/10.1007/s12555-020-0980-x.
Mahdi, E.M. and Abd Shukor, Mohd Hamdi and Meor Yusoff, M.S. (2012) The effect of sintering on the physical and optical properties of Nano-TiO 2 synthesized via a modified hydrothermal route. Arabian Journal for Science and Engineering. pp. 1-11. ISSN 1319-8025,
Mahdi, E.M. and Abd Shukor, Mohd Hamdi and Yusoff, M. and Wilfred, P. (2013) XRD and EDXRF analysis of anatase Nano-TiO2 synthesized from mineral Precursors. Advanced Materials Research, 620. pp. 179-185. ISSN 3037855606,
Mahdi, E.M. and Abd Shukor, Mohd Hamdi and Yusoff, M.S. and Wilfred, P. (2013) Characterization of titania nanoparticles synthesized by the hydrothermal method with low grade mineral precursors. Journal of Nano Research, 21. pp. 71-76. ISSN 0000021210,
Mahmoodian, R. (2009) Development of a test rig for ceramic-lined steel pipes production by self-propagating high-temperature synthesis (SHS). Masters thesis, University of Malaya.
Mahmoodian, R. and Rahbari, R.G. and Abd Shukor, Mohd Hamdi and Hassan, Mohamed Mohsen Abdel-Naeim and Sparham, M. (2013) The Effects of an unexpected ceramic coating phase at the head of a pipe on joining and postprocessing of a ceramic-lined composite pipe. JOM Journal of the Minerals, Metals and Materials Society, 65 (1). pp. 80-85. ISSN 1047-4838, DOI https://doi.org/10.1007/s11837-012-0498-7.
Mahmoodian, Reza and Rahbari, Reza and Abd Shukor, Mohd Hamdi (2011) Safety issues improvement in ceramic lined composite pipe produced using SHS method. In: 2011 International Conference on Industrial Engineering and Operations Management , January 22 – 24, 2011, Kuala Lumpur, Malaysia.
Mardziah, C.M. and Sopyan, I. and Abd Shukor, Mohd Hamdi and Ramesh, S. (2008) Synthesis and characterization of strontium-doped hydroxyapatite powder via sol-gel method. Medical Journal of Malaysia, 63. pp. 79-80. ISSN 0300-5283,
Masoud, Fathi and Sapuan, S. M. and Mohd Ariffin, Mohd Khairol Anuar and Nukman, Y. and Bayraktar, Emin (2020) Cutting processes of natural fiber-reinforced polymer composites. Polymers, 12 (6). ISSN 2073-4360, DOI https://doi.org/10.3390/POLYM12061332.
Matsuno, Takashi and Ueda, Yuya and Takahashi, Tomoya and Hama, Takayuki and Hojo, Tomohiko and Shibayama, Yuki and Muhamad, Mohd Ridha and Okitsu, Yoshitaka and Takamura, Masato (2024) Delayed fracture stress thresholds degraded by the shear punching process in ultra-high-strength steel sheets: Analysis using an in-plane bending test with numerical assimilation. Journal of Manufacturing Processes, 119. pp. 1005-1021. ISSN 1526-6125, DOI https://doi.org/10.1016/j.jmapro.2024.04.013.
Md Dawal, Siti Zawiah and Taha, Zahari and Ismail, Zubaidah (2009) Effect of job organization on job satisfaction among shop floor employees in automotive industries in Malaysia. International Journal of Industrial Ergonomics, 39 (1). pp. 1-6. ISSN 0169-8141, DOI https://doi.org/10.1016/j.ergon.2008.06.005.
Misran, H. and Aminuddin, A.M. and Zini, F.A.M. and Singh, R. (2011) Synthesis and structural consideration of metal-organic framework (MOF) coordination polymer with various metal linker ratios. Key Engineering Materials, 462-46 . Engineering, pp. 1103-1108.
Misran, H. and Singh, R. and Begum, S. and Yarmo, M.A. (2007) Processing of mesoporous silica materials (MCM-41) from coal fly ash. Journal of Materials Processing Technology, 186 (1-3). pp. 8-13.
Misran, H. and Singh, R. and Ghazali, M.J. (2011) Palm oil based fatty alcohols templated mesoporous silica and silica spheres. International Journal of Nanoscience, 10 (06). pp. 1275-1281.
Misran, H. and Yarmo, M.A. and Ramesh, S. (2012) Synthesis and characterization of silica nanospheres using nonsurfactant template. Ceramics International.
Misran, H. and Yarmo, M.A. and Singh, R. (2007) Hydrocarbon templated sol-gel synthesis and characterizations of mesoporous silica xerogel. Studies in Surface Science and Catalysis, 165 . Engineering, pp. 21-24.
Misran, Halina and Ramesh, Singh and Yarmo, Mohd Ambar (2008) Nonsurfactant route of fatty alcohols decomposition for templating of mesoporous silica. Microporous and Mesoporous Materials, 112 (1-3). pp. 243-253. ISSN 1387-1811, DOI https://doi.org/10.1016/j.micromeso.2007.09.036.
Mohamed Haneef, Intan Najwa Humaira and Shaffiar, Norhashimah and Buys, Yose Fachmi and Abd Hamid, Abdul Malek (2019) Finite element analysis (FEA) of polylactic acid/polypropylene carbonate (PLA/PPC) blends fixation plate for craniomaxillofacial surgery. International Journal of Structural Integrity, 10 (5). pp. 678-691. ISSN 1757-9864, DOI https://doi.org/10.1108/IJSI-05-2019-0048.
Mohammadjafari, M. and Ahmed, S. and Md Dawal, S.Z. and Zayandehroodi, H. (2011) The importance of project management in SMEs for the development of new products through E-Collaboration. African Journal of Business Management, 5 (30). pp. 11844-11855. ISSN 1993-8233,
Mohammadjafari, M. and Ahmed, Shamsuddin and Md Dawal, Siti Zawiah and Zayandehroodi, H. (2012) The role of project manager in smes for developing new product by e-collaboration. Advanced Materials Research, 433. pp. 1637-1645. ISSN 3037853190,
Mohammadjafari, Marjan and Ahmed, Shamsuddin and Md Dawal, Siti Zawiah and Zayandehroodi, Hadi (2011) A conceptual model for creating a favorable environment to reduce the production time and cost of production by e_collaboration. Australian Journal of Basic and Applied Sciences, 5 (6). pp. 1020-1025. ISSN 1991-8178,
Mohammadjafari Dr, M. and Ahmed, S. and Zawiah Md, S. and Zayandehroodi, H. (2012) A framework for sharing knowledge in product development by e-collaboration through project management. Research Journal of Applied Sciences, Engineering and Technology, 4 (6). pp. 649-659.
Mohd Nur, N. and Md Dawal, S.Z. (2010) Investigation on upper limb and lower back muscles activities during sedentary work. In: World Engineering Congress 2010,Conference on Manufacturing Technology and Management, 2-5 August 2010, Kuching,Sarawak.
Muhamed, Ariff Azly and Ab Rahman, Mohd Nizam and Mohd Hamzah, Firdaus and Che Mohd Zain, Che Rosmawati and Zailani, Suhaiza (2019) The impact of consumption value on consumer behaviour: A case study of halal-certified food supplies. British Food Journal, 121 (11). pp. 2951-2966. ISSN 0007-070X, DOI https://doi.org/10.1108/BFJ-10-2018-0692.
Muthiah, Bavanilatha and Lovina, - and Arthi, - and Muthukrishnan, Lakshmipathy and Lett, J. Anita and Sagadevan, Suresh and Kesavan, Sudha and Vennila, Selvaraj and Khan, M. Ajmal and Hegazy, H. H. and Ahmad, Naushad (2020) Eucalyptus concoction mediated synthesis of gold nanoparticles and its bioactive role xxplored via antimicrobial and cytotoxic studies. Journal of Nanoscience and Nanotechnology, 20 (10). pp. 6326-6333. ISSN 1533-4880, DOI https://doi.org/10.1166/jnn.2020.17897.
Nahar, Afroza and Parvin, Salma and Hasanuzzaman, M. and Rahim, N. A. (2023) Thermo-fluid physiognomies of a photovoltaic thermal collector: A comparative study with different flow channel materials. Journal of Solar Energy Engineering-Transactions of the Asme, 145 (1). ISSN 0199-6231, DOI https://doi.org/10.1115/1.4054661.
Namasivayam, Darshan and Andriyana, Andri and Arifin, N. (2022) Finite element analysis of newly developed hip prosthesis: Finite-elemente-analyse einer neu entwickelten huftprothese. Materialwissenschaft und Werkstofftechnik, 53 (3). pp. 355-369. ISSN 0933-5137, DOI https://doi.org/10.1002/mawe.202000055.
Nawawi, Natasha Ahmad and Sopyan, Iis and Ramesh, Singh and -, Afzeri (2011) Phase behaviour of manganese-doped biphasic calcium phosphate ceramics synthesized via sol-gel method. Asia-Pacific Journal of Chemical Engineering, 6 (6). pp. 823-831. ISSN 1932-2135, DOI https://doi.org/10.1002/apj.480.
Nik Pa, Nik Masmiati and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2012) Optimizing the cutting parameters for better surface quality in 2.5 D cutting utilizing titanium coated carbide ball end mill. International Journal of Precision Engineering and Manufacturing, 13 (12). pp. 2097-2102. ISSN 2234-7593,
Nordin, Noraimi Azlin Mohd and Shariff, S. Sarifah Radiah and Omar, Mohd and Supadi, Siti Suzlin (2023) Dynamic simulation analysis for various numbers of orders in an integrated car-manufacturing warehouse. International Journal of Industrial Engineering-Theory Applications and Practice, 30 (1). pp. 232-245. ISSN 1943-670X, DOI https://doi.org/10.23055/ijietap.2023.30.1.7553.
Norhirni, M.Z. and Abd Shukor, Mohd Hamdi and Nurmaya Musa, S. and Saw, L.H. and Mardi, N.A. and Hilman, N. (2011) Load and stress analysis for the swash plate of an axial piston pump/motor. Journal of Dynamic Systems, Measurement, and Control, 133 (6). ISSN 0022-0434,
Nukman, Y. and Hassan, M.A. and Harizam, M.Z. (2013) Optimization of Prediction Error in CO2 Laser Cutting process by Taguchi Artificial Neural Network Hybrid with Genetic algorithm. Applied Mathematics & Information Sciences, 7 (1). pp. 363-370. ISSN 1935-0090,
Ooi, C.Y. and Abd Shukor, Mohd Hamdi and Ramesh, S. (2007) Properties of hydroxyapatite produced by annealing of bovine bone. Ceramics International, 33 (7). pp. 1171-1177. ISSN 0272-8842,
Othman, Mohamadariff and Wan Ali, Wan Fahmin Faiz and Ain, Mohd Fadzil and Ahmad, Zainal Arifin and Mahyiddin, Wan Amirul Wan Mohd and Qasaymeh, Yazeed (2019) Study on modified curve fitting model in analyzing YIG resonator antenna. Microwave and Optical Technology Letters, 61 (2). pp. 337-342. ISSN 0895-2477, DOI https://doi.org/10.1002/mop.31570.
Paul, Ayan and Usman, Juliana and Ahmad, Mohd Yazed and Hamidreza, Mohafez and Maryam, Hadizadeh and Ong, Zhi Chao and Hasikin, Khairunnisa and Lai, Khin Wee (2021) Health efficacy of electrically operated automated massage on muscle properties, peripheral circulation, and physio-psychological variables: A narrative review. Eurasip Journal on Advances in Signal Processing, 2021 (1). ISSN 1687-6180, DOI https://doi.org/10.1186/s13634-021-00788-6.
Prihandana, Gunawan Setia and Mahardika, M. and Abd Shukor, Mohd Hamdi and Mitsui, K. (2009) Effect of m micro MoS2 powder mixed dielectric fluid on surface quality and material removal rate in micro EDM-processes. Transaction Material Research Society of Japan, 34 (2). pp. 329-332.
Prihandana, Gunawan Setia and Mahardika, Muslim and Abd Shukor, Mohd Hamdi and Mitsui, Kimiyuki (2011) Effect of low-frequency vibration on workpiece in EDM processes. Journal of Mechanical Science and Technology, 25 (5). pp. 1231-1234. ISSN 1738-494X,
Prihandana, Gunawan Setia and Mahardika, Muslim and Abd Shukor, Mohd Hamdi and Wong, Y.S. and Mitsui, Kimiyuki (2011) Accuracy improvement in nanographite powder-suspended dielectric fluid for micro-electrical discharge machining processes. The International Journal of Advanced Manufacturing Technology, 56 (1-4). pp. 143-149. ISSN 0268-3768,
Prihandana, Gunawan Setia and Sriani, Tutik and Prihandana, Kei and Prihandana, Yuta and Mahardika, Muslim and Abd Shukor, Mohd Hamdi and Mitsui, Kimiyuki (2011) Study on the effect of nano and micro MoS2 powder in micro-electrical discharge machining. Advanced Materials Research, 264. pp. 1450-1455. ISSN 3037850531,
Rady, Mohammed Hussien and Mustapa, Mohammad Sukri and Harimon, Mohd Azhar and Ibrahim, Mustaffa R. and Shamsudin, S. and Lajis, Mohd Amri and Wagiman, Abdullah and Msebawi, Muntadher S. and Yusof, Farazila (2019) Effect of hot extrusion parameters on microhardness and microstructure in direct recycling of aluminium chips [Einfluss von Warmstrangpress-Parametern auf die Mikrohärte und das Gefüge beim Wiederverwerten von Aluminiumspänen]. Materialwissenschaft und Werkstofftechnik, 50 (6). pp. 718-723. ISSN 0933-5137, DOI https://doi.org/10.1002/mawe.201800214.
Raja Ghazilla, R.A. and Sakundarini, N. and Abdul Rashid, S.H. and Ayub, N.S. and Olugu, E. and Musa, S.N. (2014) Drivers and barriers analysis for green manufacturing practices in Malaysian SMEs : A preliminary findings. In: Global Conference on Sustainable Manufacturing, 22-24 Sep 2014, Johor Bahru.
Ramesh, S. and Aw, K.L. and Tolouei, R. and Amiriyan, M. and Tan, C.Y. and Hamdi, M. and Purbolaksonoa, J. and Hassan, Mohamed Mohsen Abdel-Naeim and Teng, W.D. (2012) Sintering properties of hydroxyapatite powders prepared using different methods. Ceramics International. ISSN 0272-8842,
Ramesh, S. and Tan, C.Y. and Sopyan, I. and Abd Shukor, Mohd Hamdi and Teng, W.D. (2007) Consolidation of nanocrystalline hydroxyapatite powder. Science and Technology of Advanced Materials, 8 (1-2). pp. 124-130.
Ramesh, Singh and Amiriyan, M. and Meenaloshini, S. and Tolouei, R. and Hamdi, M. and Pruboloksono, J. and Teng, W.D. (2011) Densification behaviour and properties of manganese oxide doped Y-TZP ceramics. Ceramics International, 37 (8). pp. 3583-3590. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2011.06.014.
Ramesh, Singh and Purbolaksono, J. and Hamdi, M. and Sopyan, I. and Tolouei, R. and Amiriyan, M. and Tarlochan, F. and Teng, W.D. (2012) Low-temperature degradation (LTD) behaviour of CuO-Doped tetragonal zirconia ceramic. Ceramics-Silikáty, 56 (1). pp. 15-19. ISSN 0862-5468,
Ramesh, Singh and Tan, C.Y. and Tolouei, R. and Amiriyan, M. and Purbolaksono, J. and Sopyan, I. and Teng, W.D. (2012) Sintering behavior of hydroxyapatite prepared from different routes. Materials & Design, 34. pp. 148-154. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.08.011.
Ramesh, Singh and Tolouei, R. and Hamdi, M. and Purbolaksono, J. and Tan, C.Y. and Amiriyan, M. and Teng, W.D. (2011) Sintering behavior of nanocrystalline hydroxyapatite produced by wet chemical method. Current Nanoscience, 7 (6). pp. 845-849. ISSN 1573-4137, DOI https://doi.org/10.2174/157341311798220538.
Rashid, A.Z. and Purbolaksono, J. and Ramesh, Singh and Hamdi, M. and Ahmad, A. and Tarlochan, F. (2011) Role of physical and mechanical properties of stainless steels in expected thermal fatigue life of plenum barrier plate of a gas turbine frame. Engineering Failure Analysis, 18 (8). pp. 2336-2342.
Raza, R.G. and Mohd, H.I. (2009) Ceramic lined steel pipe production using SHS method. In: AUN/SEED Net 1st regional Conference on Materials RCM2009 Materials: Leading the Path of Engineers, USM, Penang, Malaysia, 2009, 16,17 Feb 2009, Penang, Malaysia.
Rismanchi, Behzad and Saidur, Rahman and Boroumandjazi, G. and Ahmed, Shamsuddin (2012) Energy, exergy and environmental analysis of cold thermal energy storage (CTES) systems. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5741-5746. ISSN 1364-0321, DOI https://doi.org/10.1016/j.rser.2012.06.002.
Rizwan, Muhammad and Genasan, Krishnamurithy and Murali, Malliga Raman and Balaji Raghavendran, Hanumantha Rao and Alias, Rodianah and Cheok, Yi Ying and Wong, Won Fen and Mansor, Azura and Abd Shukor, Mohd Hamdi and Basirun, Wan Jefrey and Kamarul, Tunku (2020) In vitro evaluation of novel low-pressure spark plasma sintered HA–BG composite scaffolds for bone tissue engineering. RSC Advances, 10 (40). pp. 23813-23828. ISSN 2046-2069, DOI https://doi.org/10.1039/d0ra04227g.
Roslin, Eida Nadirah and Ahmed, Shamsuddin and Md Dawal, Siti Zawiah and Tamri, Norjamalullail (2012) Strategies for the successful lean manufacturing implementation: a case study in a Malaysian automotive parts manufacturing. International Journal of Engineering Research and Technology, 1 (9). pp. 1-6. ISSN 2278-0181,
Sabdin, Saiful Din and Hussein, Nur Izan Syahriah and Sued, Mohammad Kamil and Ayob, M.S. and Rahim, M.A.S.A. and Fadzil, Mohd (2019) Effects of ColdArc welding parameters on the tensile strengths of high strength steel plate investigated using the Taguchi approach. Journal of Mechanical Engineering and Sciences, 13 (2). pp. 4846-4856. ISSN 2289-4659,
Sadeghinezhad, Emad and Akhiani, Amir Reza and Metselaar, Hendrik Simon Cornelis and Tahan Latibari, Sara and Mehrali, Mehdi and Mehrali, Mohammad (2020) Parametric study on the thermal performance enhancement of a thermosyphon heat pipe using covalent functionalized graphene nanofluids. Applied Thermal Engineering, 175. p. 115385. ISSN 1359-4311, DOI https://doi.org/10.1016/j.applthermaleng.2020.115385.
Sadollah, A. and Bahreininejad, A. and Abd Shukor, Mohd Hamdi and Purbolaksono, J. (2014) Optimum mechanical behavior of calcium phosphate cement/hydroxyl group functionalized multi-walled carbon nanotubes/bovine serum albumin composite using metaheuristic algorithms. Neural Computing and Applications. pp. 1-8. ISSN 0941-0643,
Sadollah, Ali and Bahreininejad, A. and Eskandar, Hadi and Abd Shukor, Mohd Hamdi (2012) Mine blast algorithm for optimization of truss structures with discrete variables. Computers & Structures, 102. pp. 49-63. ISSN 0045-7949,
Sakundarini, N. and Raja Ghazilla, R.A. and Abdul Rashid, S.H. and Taha, Z. (2014) Development of method for optimizing product end of life strategies in modular design. In: International Symposium on Green Manufacturing and Applications (ISGMA 2014), 24-28 June 2014, Busan, Korea.
Salehi, Mojtaba and Bahreininejad, Ardeshir and Nakhai, Isa (2011) On-line analysis of out-of-control signals in multivariate manufacturing processes using a hybrid learning-based model. Neurocomputing, 74 (12-13). pp. 2083-2095. ISSN 0925-2312, DOI https://doi.org/10.1016/j.neucom.2010.12.020.
Sami, Mian Muhammad and Zaharinie, Tuan and Yusof, Farazila and Ariga, Tadashi (2020) Investigation on Strength and Microstructural Evolution of Porous Cu/Cu Brazed Joints Using Cu-Ni-Sn-P Filler. Metals, 10 (3). p. 416. ISSN 2075-4701, DOI https://doi.org/10.3390/met10030416.
Sankar, U. and Satgunam, M. and Amiriyan, M. and Singh, R. and Teng, W.D. (2011) Sintering and densification behavior of ZnO-doped Y-TZP ceramics. Applied Mechanics and Materials, 83. pp. 197-203. ISSN 3037852216,
Sarhan, A. and Sayed, R. and Nassr, A.A. and El-Zahry, R.M. (2001) Interrelationships between cutting force variation and tool wear in end-milling. Journal of Materials Processing Technology, 109 (3). pp. 229-235. ISSN 0924-0136,
Sarhan, A.A.D. and Matsubara, A. and Hassan, M.A. (2011) High-precision machining by measuring and compensating the error motion of spindleâs axis of rotation in radial direction. Electrical Engineering and Intelligent Systems. pp. 347-359.
Sarhan, Ahmed AD and Matsubara, Atsushi (2011) Compensation method of the machine tool spindle thermal displacement for accurate monitoring of cutting forces. Materials and Manufacturing Processes, 26 (12). pp. 1511-1521.
Sarhan, Ahmed AD and Matsubara, Atsushi (2013) High-precision machining by measuring and compensating the error motion of spindle's axis of rotation in radial direction. Springer, pp. 347-359.
Sarhan, Ahmed Aly Diaa and Matsubara, Atsushi and Sugihara, Motoyuki and Saraie, Hidenori and Ibaraki, Soichi and Kakino, Yoshiaki (2006) Monitoring method of cutting force by using additional spindle sensors. JSME International Journal Series C, 49 (2). pp. 307-315. ISSN 1344-7653,
Sarhan, Ahmed Aly Diaa Mohammed and Hassan, M.A. and Matsubara, A. and Abd Shukor, Mohd Hamdi (2011) Compensation of machine tool spindle error motions in the radial direction for accurate monitoring of cutting forces utilizing sensitive displacement sensors. In: Proceedings of the World Congress on Engineering, 2011, London.
Sarhan, Ahmed Aly Diaa Mohammed and Sayuti, Mohd and Abd Shukor, Mohd Hamdi (2012) Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system. The International Journal of Advanced Manufacturing Technology, 63 (5-8). pp. 505-512. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-012-3940-7.
Sarhan, Ahmed Aly Diaa Mohammed and Zalnezhad, E. and Hamdi, M. (2012) The influence of higher surface hardness on fretting fatigue life of hard anodized aerospace AL7075-T6 alloy. Materials Science and Engineering: A. ISSN 0921-5093,
Saw, L.H. and Rahbari, R.G. and Abd Shukor, Mohd Hamdi and Yahya, Rosiyah (2009) Correlations between reaction wave propagation and phase formations in combustion of diluted TiO2–Al–C mixture. Materials Research Innovations, 13 (3). pp. 171-175. ISSN 1432-8917, DOI https://doi.org/10.1179/143307509X437536.
Sayuti, M. and Sarhan, A.A.D. and Tanaka, T. and Abd Shukor, Mohd Hamdi and Saito, Y. (2012) Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system. The International Journal of Advanced Manufacturing Technology. pp. 1-8. ISSN 0268-3768,
Sayuti, M. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2012) An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy. The International Journal of Advanced Manufacturing Technology. pp. 1-17. ISSN 0268-3768,
Sayuti, Mohd and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2011) Optimizing the machining parameters in glass grinding operation on the CNC milling machine for best surface roughness. Advanced Materials Research, 154-15. pp. 721-726. ISSN 1022-6680, DOI https://doi.org/10.4028/www.scientific.net/AMR.154-155.721.
Sayuti, Mohd and Sarhan, Ahmed Aly Diaa Mohammed and Fadzil, M. and Abd Shukor, Mohd Hamdi (2012) Enhancement and verification of a machined surface quality for glass milling operation using CBN grinding tool-Taguchi approach. The International Journal of Advanced Manufacturing Technology, 60 (9-12). pp. 939-950. ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-011-3657-z.
Sisamouth, L. and Abd Shukor, Mohd Hamdi and Ariga, T. (2010) Investigation of gap filling ability of Ag-Cu-In brazing filler metals. Journal of Alloys and Compounds, 504 (2). pp. 325-329. ISSN 0925-8388,
Sivakumar, S. and Ramesh, Singh and Chin, K.L. and Tan, C.Y. and Teng, W.D. (2011) Effect of sintering profiles on the properties and ageing resistance of Y-TZP ceramic. International Journal of Automotive and Mechanical Engineering, 4. pp. 405-413. ISSN 2229-8649, DOI https://doi.org/10.15282/ijame.4.2011.3.0033.
Sopyan, I. and Fadli, A. and Ramesh, S. (2013) Protein foaming-consolidation method for fabrication of high performance porous bioceramics. Advanced Materials Research, 622. pp. 1759-1763.
Sopyan, I. and Mardziah, C.M. and Ramesh, S. (2012) Fabrication of porous ceramic scaffolds via polymeric sponge method using sol-gel derived strontium doped hydroxyapatite. Applied Mechanics and Materials, 117-11. pp. 829-832. ISSN 3037852801,
Sopyan, I. and Nawawi, N.A. and Shah, Q.H. and Ramesh, S. and Tan, C.Y. and Abd Shukor, Mohd Hamdi (2011) Sintering and properties of dense manganese-doped calcium phosphate bioceramics prepared using sol-gel derived nanopowders. Materials and Manufacturing Processes, 26 (7). pp. 908-914. ISSN 1042-6914,
Sopyan, I. and Ramesh, S. and Nawawi, N.A. and Tampieri, A. and Sprio, S. (2011) Effects of manganese doping on properties of sol gel derived biphasic calcium phosphate ceramics. Ceramics International, 37 (8). pp. 3703-3715.
Sopyan, I. and Ramesh, Singh and Hamdi, M. (2008) Synthesis of nano sized hydroxyapatite powder using sol-gel technique and its conversion to dense and porous bodies. Indian Journal of Chemistry Section a-Inorganic Bio-Inorganic Physical Theoretical & Analytical Chemistry, 47 (11). pp. 1626-1631. ISSN 0376-4710,
Sorooshian, Shahryar and Azizan, Noor Azlinna and Ale Ebrahim, Nader (2022) Weighted aggregated sum product assessment. Mathematical Modelling of Engineering Problems (MMEP), 9 (4). pp. 873-878. ISSN 2369-0739, DOI https://doi.org/10.18280/mmep.090403.
Syed Abu Bakar, Sharifah Adzila and Sopyan, I. and Abd Shukor, Mohd Hamdi and Ramesh, Singh (2011) Mechanochemical synthesis of nanosized hydroxyapatite powder and its conversion to dense bodies. Materials Science Forum, 694 . Engineering, pp. 118-122.
Tahriri, F. and Dabbagh, M. and Ale Ebrahim, N. (2014) Supplier assessment and selection using fuzzy analytic hierarchy process in a steel manufacturing company. Journal of Scientific Research and Reports, 3 (10). pp. 1319-1338. ISSN 2320–0227, DOI https://doi.org/10.5281/zenodo.8612.
Tan, C.Y. and Ramesh, S. and Aw, K.L. and Yeo, W.H. and Abd Shukor, Mohd Hamdi and Sopyan, I. (2008) Effect of powder calcination on the sintering of hydroxyapatite. Medical Journal of Malaysia, 63. pp. 87-88. ISSN 0300-5283,
Tarlochan, F. and Ramesh, S. (2011) Composite sandwich structures with nested inserts for energy absorption application. Composite Structures.
Tarlochan, F. and Ramesh, S. and Harpreet, S. (2012) Advanced composite sandwich structure design for energy absorption applications: blast protection and crashworthiness. Composites Part B: Engineering, 48 (5). pp. 2198-2208. ISSN 1359-8368,
Thepsonthi, T. and Abd Shukor, Mohd Hamdi and Mitsui, K. (2009) Investigation into minimal-cutting-fluid application in high-speed milling of hardened steel using carbide mills. International Journal of Machine Tools and Manufacture, 49 (2). pp. 156-162.
Tolouei, R. and Ramesh, S. and Tan, C.Y. and Amiriyan, M. and Teng, W.D. (2011) Sintering effects on the densification of nanocrystalline hydroxyapatite. Science. ISSN 1095-9203,
Tolouei, R. and Singh, R. and Sopyan, I. and Yong, T.C. and Amiriyan, M. and Dung, T.W. (2011) Dependence of the fracture toughness on the sintering time of dense hydroxyapatite bioceramics. Materials Science Forum, 694 . International Conference on Frontier of Nanoscience and Technology (ICFNST 2011), pp. 391-395.
Tolouei, R. and Singh, R. and Tan, C.Y. and Amiriyan, M. and Teng, W.D. (2011) Effect of grain size on vickers microhardness and fracture toughness in calcium phosphate bioceramics. Applied Mechanics and Materials, 83. pp. 237-243.
Tolouei, R. and Singh, R. and Tan, C.Y. and Satgunam, M. and Amiriyan, M. (2012) Manufacturing of high toughness hydroxyapatite produced by wet chemical method. Applied Mechanics and Materials, 110-11. pp. 1289-1295. ISSN 3037852623,
Toque, Jay Arre and Abd Shukor, Mohd Hamdi and Ide-Ektessabi, A. and Sopyan, Iis (2009) Effect of the processing parameters on the integrity of calcium phosphate coatings produced by RF-magnetron sputtering. International Journal of Modern Physics B, 23 (31). pp. 5811-5818. ISSN 0217-9792,
Wahab, Ahmad Khairi Abdul and Hussain, Mohd Azlan and Omar, Rosli (2009) Fuzzy logic controller for a partially simulated chemical reactor system. In: 2nd Regional Conference on Chemical Engineering, 23-24 October 2009, Ho Chi Minh City, Vietnam.
Wahab, Ahmad Khairi Abdul and Hussain, Mohd Azlan and Omar, Rosli (2008) An artificial intelligence software-based controller for temperature control of a partially simulated chemical reactor system. Chemical Product and Process Modeling, 3 (1). p. 53. ISSN 1934-2659, DOI https://doi.org/10.2202/1934-2659.1214.
Wakeel, Saif and Haseeb, A. S. Md. Abdul and Hoon, Khoo Ly and Amalina, Muhammad Afifi (2022) Effects of commercial no-clean flux on reliability of fine pitch flip-chip package with solder bumps and copper pillars. IEEE Transactions on Components Packaging and Manufacturing Technology, 12 (8). pp. 1386-1394. ISSN 2156-3950, DOI https://doi.org/10.1109/TCPMT.2022.3191604.
Wazed, M.A. and Ahmed, S. (2011) Extraction of fuel from municipality solid wastes using an updraft gasifier. International Journal of Renewable Energy Technology, 2 (2). pp. 105-119. ISSN 1757-3971,
Wazed, M.A. and Ahmed, S. and Nukman, Y. (2011) Application of Taguchi Method to analyze the impacts of commonality in multistage production under uncertainty. Advanced Science Letters, 4 (2). pp. 415-423. ISSN 1936-6612,
Wazed, M.A. and Ahmed, S. and Nukman, Y. (2011) Application of Taguchi method to analyse the impacts of common process and batch size in multistage production system under uncertain conditions. European Journal of Industrial Engineering, 5 (2). pp. 215-231. ISSN 1751-5254,
Wazed, M.A. and Ahmed, S. and Nukman, Y. and Ale Ebrahim, N. (2012) Models for component commonality in multistage production. Applied Mechanics and Materials, 110-11. pp. 258-266.
Yong, T.C. and Singh, R. and Liang, A.K. and Hong, Y.W. (2010) Sintering behavior of hydroxyapatite ceramics prepared by different routes. Ceramic Engineering and Science Proceedings, 30 . Engineering, pp. 127-137.
Yusof, Farazila and Yukio, Miyashita and Yoshiharu, Mutoh and Abd Shukor, Mohd Hamdi (2012) Effect of anodizing on pulsed Nd: YAG laser joining of polyethylene terephthalate (PET) and aluminium alloy (A5052). Materials & Design, 37. pp. 410-415. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2012.01.006.
Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Abd Shukor, Mohd Hamdi (2012) Prediction of TiN coating adhesion strength on aerospace AL7075-T6 alloy using fuzzy rule based system. International Journal of Precision Engineering and Manufacturing, 13 (8). pp. 1453-1459. ISSN 1229-8557,
Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2013) Investigating the effects of hard anodizing parameters on surface hardness of hard anodized aerospace AL7075-T6 alloy using fuzzy logic approach for fretting fatigue application. The International Journal of Advanced Manufacturing Technology. pp. 1-12.
Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2012) Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy. Materials Science and Engineering: A. ISSN 0921-5093,
Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2013) Optimizing the PVD TiN thin film coating as parameters on aerospace AL7075-T6 alloy for higher coating hardness and adhesion with better tribological properties of the coating surface. The International Journal of Advanced Manufacturing Technology, 64 (1-4). pp. 281-290. ISSN 0268-3768,
Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2013) Surface hardness prediction of CrN thin film coating on AL7075-T6 alloy using fuzzy logic system. International Journal of Precision Engineering and Manufacturing, 14 (3). pp. 467-473. ISSN 2234-7593,
Zalnezhad, E. and Sarhan, Ahmed Aly Diaa Mohammed and Hamdi, M. (2013) A fuzzy logic based model to predict surface hardness of thin film TiN coating on aerospace AL7075-T6 alloy. The International Journal of Advanced Manufacturing Technology. pp. 1-9. ISSN 0268-3768,
Zuhdi, A.S.M. and Ismail, M.D. and Undok, A.W. and Abidin, I.Z. and Naser, M.N.M. and Yaakob, Z.H. and Singh, R. and Singh, R. and Nordin, A.J. and Ahmad, W.A.W. (2012) Extracorporeal shockwave myocardial reperfusion (ESMR) therapy improves left ventricular dyssynchrony. Circulation, 125 (19). E747-E747.
