Heat transfer enhancement of nanofluids in a Lid-Driven square enclosure

Rahman, M.M. and Billah, M.M. and Hasanuzzaman, M. and Saidur, Rahman and Rahim, N.A. (2012) Heat transfer enhancement of nanofluids in a Lid-Driven square enclosure. Numerical Heat Transfer, Part A: Applications, 62 (12). pp. 973-991. ISSN 1521-0634, DOI https://doi.org/10.1080/10407782.2012.715983.

Full text not available from this repository.
Official URL: http://www.tandfonline.com/doi/pdf/10.1080/1040778...

Abstract

A numerical investigation of mixed convection flows through a copper-water nanofluid in a lid-driven square enclosure has been executed here. The two horizontal walls of the enclosure are insulated, while the vertical walls are kept differentially heated by constant temperature with the left wall moving at a constant speed. The physical problem is represented mathematically by a set of governing equations, and the transport equations are solved using the finite element method based on Galerkin-weighted residuals. Comparisons with previously published work are performed and found to be in excellent agreement. Computational results are obtained for a wide range of parameters such as the Richardson number, solid volume fraction, and Reynolds number. Copper-water nanofluids are used with Prandtl number Pr=6.2, and solid volume fraction is varied as 0, 2, 4, and 8. Reynolds number Re is varied from 50 to 200, while the Richardson number Ri is from 0 to 5 on the flow and thermal fields; heat transfer characteristics are also studied in detail. Results are offered in terms of streamlines, isotherms, average Nusselt number, and fluid temperature for the mentioned parameters. It is found that heat transfer increased by 9.91 as increases from 0 to 8 at Ri=5. On the other hand, at the same convective regime, heat transfer increased by 120.91 as Re increased from 50 to 200.

Item Type: Article
Funders: UNSPECIFIED
Additional Information: Export Date: 6 December 2012 Source: Scopus CODEN: NHAAE Language of Original Document: English Correspondence Address: Rahman, M.M.; Department of Mathematics, Bangladesh University of Engineering and Technology (BUET), Dhaka 1000, Bangladesh; email: m71ramath@gmail.com References: Yu, Z.T., Hu, Y.C., Fan, L.W., Cen, K.F., A parametric study of prandtl number effects on laminar natural convection heat transfer from a horizontal circular cylinder to its coaxial triangular enclosure (2010) Numer. Heat Transfer A, 58 (7), pp. 564-580; Basak, T., Roy, S., Ramakrishna, D., Pop, I., Visualization of heat transport during natural convection within porous triangular cavities via heat line approach (2010) Numer. Heat Transfer A, 57 (6), pp. 431-452; Paramane, S.B., Sharma, A., Consistent implementation and comparison of FOU, CD, SOU and QUICK convection schemes on square, skew, trapezoidal, and triangular lid-driven cavity flow (2008) Numer. Heat Transfer B, 54 (1), pp. 84-102; Talukder, P., Shah, M., Analysis of laminar mixed convection heat transfer in horizontal triangular ducts (2008) Numer. Heat Transfer A, 54 (12), pp. 1148-1168; Oztop, H.F., Dagtekin, I., Mixed convection in two-sided lid-driven differentially heated square cavity (2004) International Journal of Heat and Mass Transfer, 47 (8-9), pp. 1761-1769. , DOI 10.1016/j.ijheatmasstransfer.2003.10.016; Luo, W.J., Yang, R.J., Multiple fluid flow and heat transfer solutions in a two-sided lid-driven cavity (2007) Int J. Heat Mass Transfer, 50, pp. 2394-2405; Chamkha, A.J., Hydromagnetic combined convection flow in a vertical lid-driven cavity with internal heat generation or absorption (2002) Numerical Heat Transfer; Part A: Applications, 41 (5), pp. 529-546. , DOI 10.1080/104077802753570356; Rahman, M.M., Alim, M.A., Sarker, M.M.A., Numerical study on the conjugate effect of joule heating and magneto-hydrodynamics mixed convection in an obstructed lid-driven square cavity (2010) Int. Comm. Heat Mass Transfer, 37, pp. 524-534; Basak, T., Roy, S., Sharma, P.K., Pop, I., Analysis of mixed convection flows within a square cavity with uniform and non-uniform heating of bottom wall (2009) Int. J. Therm. Sci., 48, pp. 891-912; Khanafer, K., Vafai, K., Lightstone, M., Buoyancy-driven heat transfer enhancement in a two-dimensional enclosure utilizing nanofluids (2003) International Journal of Heat and Mass Transfer, 46 (19), pp. 3639-3653. , DOI 10.1016/S0017-9310(03)00156-X; Murshed, S.M.S., Leong, K.C., Yang, C., Enhanced thermal conductivity of TiO 2 - Water based nanofluids (2005) International Journal of Thermal Sciences, 44 (4), pp. 367-373. , DOI 10.1016/j.ijthermalsci.2004.12.005, PII S129007290500013X; Wang, X.-Q., Mujumdar, A.S., Heat transfer characteristics of nanofluids: A review (2007) International Journal of Thermal Sciences, 46 (1), pp. 1-19. , DOI 10.1016/j.ijthermalsci.2006.06.010, PII S1290072906001190; Tiwari, R.K., Das, M.K., Heat transfer augmentation in a two-sided lid-driven differentially heated square cavity utilizing nanofluid (2007) Int J. Heat Mass Transfer, 50, pp. 2002-2018; Santra, A.K., Sen, S., Chakraborty, N., Study of heat transfer due to laminar flow of copper-water nanofluid through two isothermally heated parallel plates (2009) Int. J. Therm. Sci., 48, pp. 391-400; Muthtamilselvan, M., Kandaswamy, P., Lee, J., Heat transfer enhancement of copper-water nanofluids in a lid-driven enclosure (2010) Comm. Nonlinear Sci. Numer. Simulation, 15, pp. 1501-1510; Ghasemi, B., Aminossadati, S.M., Mixed convection in a lid-driven triangular enclosure filled with nanofluids (2010) Int Comm Heat Mass Transfer, 37, pp. 1142-1148; Nada, E.A., Chamkha, A.J., Mixed convection flow in a lid-driven inclined square enclosure filled with a nanofluid (2010) Euro. J. Mech. B/Fluids, 29, pp. 472-482; Mansour, M.A., Mohamed, R.A., Abd-Elaziz, M.M., Ahmed, S.E., Numerical simulation of mixed convection flows in a square lid-driven cavity partially heated from below using nanofluid (2010) Int. Comm. Heat Mass Transfer, 37, pp. 1504-1512; Xuan, Y., Li, Q., Investigation on convective heat transfer and flow features of nanofluids (2003) Journal of Heat Transfer, 125 (1), pp. 151-155. , DOI 10.1115/1.1532008; Saleh, H., Roslan, R., Hashim, I., Natural convection heat transfer in a nanofluid-filled trapezoidal enclosure (2011) Int. J. Heat Mass Transfer, 54, pp. 194-201; Wang, M., Kang, Q., Pan, N., Thermal conductivity enhancement of carbon fiber composites (2009) Appl. Therm. Eng., 29, pp. 418-421; Talebi, F., Mahmoudi, A.H., Shahi, M., Numerical study of mixed convection flows in a square lid-driven cavity utilizing nanofluid (2010) Int. Comm. Heat Mass Transfer, 37, pp. 79-90; Tzeng, S.-C., Lin, C.-W., Huang, K.D., Heat transfer enhancement of nanofluids in rotary blade coupling of four-wheel-drive vehicles (2005) Acta Mechanica, 179 (1-2), pp. 11-23. , DOI 10.1007/s00707-005-0248-9; Billah, M.M., Rahman, M.M., Shahabuddin, M., Azad, A.K., Heat transfer enhancement of copper-water nanofluids in an inclined lid-driven triangular enclosure (2011) J. Scientific Res., 3 (3), pp. 525-545; Rahman, M.M., Billah, M.M., Rahman, A.T.M.M., Kalam, M.A., Ahsan, A., Numerical investgation of heat transfer enhancement of nanofluids in an inclined lid-driven triangular enclosure (2011) Int. Comm. Heat Mass Transfer, 38 (10), pp. 1360-1367; Brinkman, H.C., The viscosity of concentrated suspensions and solutions (1952) J. Chem. Physics, 20, pp. 571-581
Uncontrolled Keywords: Computational results, Constant speed, Constant temperature, Fluid temperatures, Governing equations, Heat transfer characteristics, Heat Transfer enhancement, Horizontal walls, Mixed convection flow, Nanofluids, Numerical investigations, Richardson number, Solid volume fraction, Square enclosures, Thermal field, Transport equation, Vertical wall, Copper, Enclosures, Finite element method, Mixed convection, Nusselt number, Reynolds number, Nanofluidics.
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
T Technology > TJ Mechanical engineering and machinery
Divisions: Faculty of Engineering
Depositing User: Mr Jenal S
Date Deposited: 02 Jul 2013 02:10
Last Modified: 25 Oct 2019 06:23
URI: http://eprints.um.edu.my/id/eprint/6283

Actions (login required)

View Item View Item