Bakar, A.H.A. and Yusof, S. and Satchiananda, M. and Mekhilef, Saad (2006) Load response towards voltage in TNB power system using the measurement approach. In: 1st International Power and Energy Conference, PECon 2006, Putrajaya.
|
PDF (Load response towards voltage in TNB power system using the measurement approach)
Load_response_towards_voltage_in_TNB_power_system_using_the_measurement_approach.pdf - Published Version Download (7MB) |
Abstract
This paper reports the load-voltage dependency using field measurements for a faulted condition that caused a momentary voltage sag in a Tenaga Nasional Berhad network in the Central Region. The static load model is used in this study and its suitability is discussed in comparison to the dynamic load model. A fast method of calculating real and reactive power based on available information is devised. Propagation of fault through transformers is also investigated. The effect of voltage on real and reactive power is discussed at great length. Various factors influence the load characteristic, including weather, time of day, network conditions and type of feeder load. Long-term steady state data should be made available for analysis to back up results from this study.
Item Type: | Conference or Workshop Item (Paper) |
---|---|
Funders: | UNSPECIFIED |
Additional Information: | Conference code: 72409 Export Date: 16 November 2012 Source: Scopus Art. No.: 4154513 doi: 10.1109/PECON.2006.346669 Language of Original Document: English Correspondence Address: Bakar, A. H. A.; Maintenance, Transmission Division TNB References: Romero Navarro, I., (2005) Dynamic Power System Load: Estimation of Parameters from Operational Data, , Lund University, Sweden; Price, W.W., Wirgau, K.A., Murdoch, A., Mitsche, J.V., Vaahedi, E., El-Kady, M.A., Load Modeling for Power Flow and Transient Stability Computer Studies (1988) IEEE Transactions on Power Systems, 3 (1). , February; Taylor, C.W., (1994) Power System Voltage Stability, , EPRI, McGraw Hill Inc; Lin, C.-J., Chen, Y.-T., Chiou, C.-Y., Huang, C.-H., Chiang, H.-D., Wang, J.-C., Feikh-Ahmed, L., Dynamic Load Models in Power Systems Using the Measurement Approach (1993) IEEE Transactions on Power Systems, 8 (1). , February; Karlsson, D., Hill, D.J., Modeling and Identification of Nonlinear Dynamic Loads in Power Systems (1994) IEEE Transactions on Power Systems, 9 (1). , February; Dwyer, A., Nielsen, R.E., Stangl, J., Markushevich, N.S., Load to Voltage Dependency Tests at B.C. Hydro (1995) IEEE Transactions on Power Systems, 10 (2). , May; Hiskens, I.A., Milanovic, J.V., Load Modeling in Studies of Power System Damping (1995) IEEE Transactions on Power Systems, 10 (4). , November; B. Sawir, M.R. Ghani, A.A. Zin, A.H. Yatim, H. Shaibon, K.L. Lo, Voltage Sag: Malaysian's Experience, IEEE, 1998Tomiyama, K., Ueoka, S., Takano, T., Iyoda, I., Matsuno, K., Tetrima, K., Paserba, J.J., Modeling of Load During and After System Faults Based on Actual Field Data IEEE Transactions on Power System; Kermendey, E., Villalobos, N., Schmieg, M., The Impact of Load Behaviour on Voltage Stability, an Application Case in ENELVEN/ VENEZUELA |
Uncontrolled Keywords: | Dynamic models, Dynamic programming, Electric loads, Electric power factor, Electric power systems, Fish, Reactive power, Theorem proving, (I ,J) conditions, Back up, Central region, Field measurements, International (CO), Load characteristics, load modelling, Load response, network conditions, power systems, Real and reactive power, static loads, Steady state data, Time of day, Voltage sags, Loads (forces). |
Subjects: | T Technology > TA Engineering (General). Civil engineering (General) T Technology > TK Electrical engineering. Electronics Nuclear engineering |
Divisions: | Faculty of Engineering |
Depositing User: | Mr Jenal S |
Date Deposited: | 26 Feb 2013 09:54 |
Last Modified: | 25 Oct 2019 03:49 |
URI: | http://eprints.um.edu.my/id/eprint/4898 |
Actions (login required)
View Item |