 | Up a level |
Abd Samad, Muhammad Izzuddin and Noor, Mimiwaty Mohd and Nayan, Nafarizal and Abu Bakar, Ahmad Shuhaimi and Mansor, Marwan and Zuhdi, Ahmad Wafi Mahmood and Hamzah, Azrul Azlan and Latif, Rhonira (2023) Effects of argon/nitrogen sputtering gas on the microstructural, crystallographic and piezoelectric properties of AlN thin films. Scripta Materialia, 226. ISSN 1359-6462, DOI https://doi.org/10.1016/j.scriptamat.2022.115228.
Ahmed, Usman and Shahid, M. M. and Shahabuddin, Syed and Abd Rahim, Nasrudin and Alizadeh, Mahdi and Pandey, A. K. and Sagadevan, Suresh (2021) An efficient platform based on strontium titanate nanocubes interleaved polypyrrole nanohybrid as counter electrode for dye-sensitized solar cell. Journal of Alloys and Compounds, 860. ISSN 0925-8388, DOI https://doi.org/10.1016/j.jallcom.2020.158228.
Ata-ur-Rehman, . and Ali, Ghulam and Bilal, Muhammad and Zahid, Muhammad and Bashir, Shahid and Kalam, Abul and Iqbal, Javed and Qayyum, Muhammad Abdul and Wageh, S. and Abbas, Syed Mustansar (2022) Transformation of diffusive to capacitive kinetics in nanoscale modified Co-TiO2@CNTs composites safeguarding steady reversible capacity as sodium-ion battery anode. Journal of Alloys and Compounds, 902. ISSN 0925-8388, DOI https://doi.org/10.1016/j.jallcom.2022.163772.
Aziz, Shujahadeen B. and Asnawi, Ahmad S.F.M. and Abdulwahid, Rebar T. and Ghareeb, Hewa O. and Alshehri, Saad M. and Ahamad, Tansir and Hadi, Jihad M. and Mohd Fakhrul Zamani, Abdul Kadir (2021) Design of potassium ion conducting PVA based polymer electrolyte with improved ion transport properties for EDLC device application. Journal of Materials Research and Technology, 13. pp. 933-946. ISSN 22387854, DOI https://doi.org/10.1016/j.jmrt.2021.05.017.
Ejiga, Eko Gerald and Ismail, Noer El Hidayah and Yusoff, Ismail (2021) Implementing digital edge enhancers on improved high-resolution aeromagnetic signals for structural-depth analysis around the Middle Benue Trough, Nigeria. Minerals, 11 (11). ISSN 2075-163X, DOI https://doi.org/10.3390/min11111247.
Hasan, Abdulwahab A. Q. and Alkahtani, Ammar Ahmed and Shahahmadi, Seyed Ahmad and Alam, Mohammad Nur E. and Islam, Mohammad Aminul and Amin, Nowshad (2021) Delamination-and electromigration-related failures in solar panels-a review. Sustainability, 13 (12). ISSN 2071-1050, DOI https://doi.org/10.3390/su13126882.
Hosen, Md Akter and Shammas, Mahaad Issa and Shill, Sukanta Kumer and Jumaat, Mohd Zamin and Alengaram, U. Johnson and Ahmmad, Rasel and Althoey, Fadi and Islam, A. B. M. Saiful and Lin, Ying (2021) Investigation of structural characteristics of palm oil clinker based high-strength lightweight concrete comprising steel fibers. Journal of Materials Research and Technology-JMR&T, 15. pp. 6736-6746. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2021.11.105.
Isa, Mohammad Syahid Mohd and Moghadasi, Kaveh and Ariffin, Mohammad Ashraf and Raja, Sufian and Muhamad, Mohd Ridha and Yusof, Farazila and Jamaludin, Mohd Fadzil and Yusoff, Nukman and Ab Karim, Mohd Sayuti (2021) Recent research progress in friction stir welding of aluminium and copper dissimilar joint: A review. Journal of Materials Research and Technology-JMR&T, 15. pp. 2735-2780. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2021.09.037.
Khireddine, A. and Bouhemadou, A. and Alnujaim, S. and Guechi, N. and Bin-Omran, S. and Al-Douri, Y. and Khenata, R. and Maabed, S. and Kushwaha, A. K. (2015) First-principles predictions of the structural, electronic, optical and elastic properties of the zintl-phases AE3GaAs3 (AE = Sr, Ba). Solid State Sciences, 114. ISSN 1293-2558, DOI https://doi.org/10.1016/j.jallcom.2014.08.143.
Li, Diyuan and Armaghani, Danial Jahed and Zhou, Jian and Lai, Sai Hin and Hasanipanah, Mahdi (2020) A GMDH predictive model to predict rock material strength using three non-destructive tests. Journal of Nondestructive Evaluation, 39 (4). ISSN 0195-9298, DOI https://doi.org/10.1007/s10921-020-00725-x.
Liau, K.F. and Shoji, T. and Ong, Y.H. and Chua, A.S.M. and Yeoh, H.K. and Ho, P.Y. (2015) Kinetic and stoichiometric characterization for efficient enhanced biological phosphorus removal (EBPR) process at high temperatures. Bioprocess and Biosystems Engineering, 38 (4). pp. 729-737. ISSN 1615-7591, DOI https://doi.org/10.1007/s00449-014-1313-3.
Mahalakshmi, S. and Mayandi, Jeyanthinath and Sagadevan, Suresh and Ragavendran, V and Manikandan, K. and Arumugam, S. and Pearce, J. M. and Venkatachalapathy, Vishnukanthan (2023) Enriched second-harmonic generation in meta-phase barium titanate nanostructures synthesized by sol-gel hydrothermal method. Journal of Alloys and Compounds, 936. ISSN 0925-8388, DOI https://doi.org/10.1016/j.jallcom.2022.168171.
Maher, Ibrahem and Mehran, Q. M. (2022) Adhesion strength prediction of craln coating on al-si alloy (LM28): Fuzzy modelling. Metals and Materials International, 28 (2). pp. 421-432. ISSN 1598-9623, DOI https://doi.org/10.1007/s12540-020-00946-9.
Nagaraja, Santhosh and Kodandappa, Ramesha and Ansari, Khalid and Kuruniyan, Mohamed Saheer and Afzal, Asif and Kaladgi, Abdul Razak and Aslfattahi, Navid and Saleel, C. Ahamed and Gowda, Ashwin C. and Bindiganavile Anand, Praveena (2021) Influence of heat treatment and reinforcements on tensile characteristics of aluminium AA 5083/silicon carbide/fly ash composites. Materials, 14 (18). ISSN 1996-1944, DOI https://doi.org/10.3390/ma14185261.
Nagata, Yoshihiro and Takai, Ryosuke and Okane, Toshimitsu and Ahmad Hairuddin, Muhammad Khairi Faiz and Yoshida, Makoto (2022) Influence of solid cohesion on viscous properties in Norton law for aluminum alloys during partial solidification. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 832. ISSN 0921-5093, DOI https://doi.org/10.1016/j.msea.2021.142339.
Otchere, Daniel Asante and Ganat, Tarek Omar Arbi and Gholami, Raoof and Lawal, Mutari (2021) A novel custom ensemble learning model for an improved reservoir permeability and water saturation prediction. Journal of Natural Gas Science and Engineering, 91. ISSN 1875-5100, DOI https://doi.org/10.1016/j.jngse.2021.103962.
Parveez, Bisma and Jamal, Nur Ayuni and Aabid, Abdul and Baig, Muneer and Yusof, Farazila (2023) Experimental analysis and parametric optimization on compressive properties of diamond-reinforced porous Al composites. Materials, 16 (1). ISSN 1996-1944, DOI https://doi.org/10.3390/ma16010091.
Sarir, Payam and Armaghani, Danial Jahed and Jiang, Huanjun and Sabri, Mohanad Muayad Sabri and He, Biao and Ulrikh, Dmitrii Vladimirovich (2022) Prediction of bearing capacity of the square concrete-filled steel tube columns: An application of metaheuristic-based neural network models. Materials, 15 (9). DOI https://doi.org/10.3390/ma15093309.
Sharath, Ballupete Nagaraju and Venkatesh, Channarayapattana Venkataramaiah and Afzal, Asif and Aslfattahi, Navid and Aabid, Abdul and Baig, Muneer and Saleh, Bahaa (2021) Multi ceramic particles inclusion in the aluminium matrix and wear characterization through experimental and response surface-artificial neural networks. Materials, 14 (11). ISSN EISSN 1996-1944, DOI https://doi.org/10.3390/ma14112895.
Tarmizi, S. M. A. and Nordin, N. A. and Mazlan, S. A. and Ubaidillah, U. and Aziz, S. A. A. and Mohamad, N. and Mohd Hapipi, Norhiwani (2023) Improvement of rheological and transient response of magnetorheological grease with amalgamation of cobalt ferrite. Journal of Materials Research and Technology-JMR&T, 23. pp. 1285-1295. ISSN 2238-7854, DOI https://doi.org/10.1016/j.jmrt.2022.12.154.
Yelwa, Nura Abdulmumini and Mustapha, Khairul Azlan and Opuwari, Mimonitu and Abd Aziz, Azharuddin (2022) Biomarkers, stable carbon isotope, and trace element distribution of source rocks in the Orange Basin, South Africa: Implications for paleoenvironmental reconstruction, provenance, and tectonic setting. Journal of Petroleum Exploration and Production Technology, 12 (2). pp. 307-339. ISSN 2190-0558, DOI https://doi.org/10.1007/s13202-021-01317-9.
Zhang, Qiaozhen and Chen, Mingzhu and Liu, Huiling and Zhao, Xiangyong and Qin, Xiaomei and Wang, Feifei and Tang, Yanxue and Yeoh, Keat Hoe and Chew, Khian-Hooi and Sun, Xiaojuan (2021) Deposition, characterization, and modeling of scandium-doped aluminum nitride thin film for piezoelectric devices. Materials, 14 (21). ISSN EISSN 1996-1944, DOI https://doi.org/10.3390/ma14216437.
Mustaffa, Siti Noor Ashikin (2021) Facies-based petroleum system of northern onshore Sarawak Basin. In: EAGE Asia Pacific Virtual Geoscience Week 2021, 19 - 23 April 2021, Virtual, Online.
