 | Up a level |
Abo Sabah, S.H. and Hassan, M.H. and Muhamad Bunnori, Norazura and Megat Johari, M.A. (2019) Bond strength of the interface between normal concrete substrate and GUSMRC repair material overlay. Construction and Building Materials, 216. pp. 261-271. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2019.04.270.
Abutaha, F. and Razak, H.A. and Kanadasan, Jegathish (2016) Effect of palm oil clinker (POC) aggregates on fresh and hardened properties of concrete. Construction and Building Materials, 112. pp. 416-423. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.02.172.
Ahmadinia, E. and Zargar, M. and Karim, Mohamed Rehan and Abdelaziz, M. and Ahmadinia, E. (2012) Performance evaluation of utilization of waste Polyethylene Terephthalate (PET) in stone mastic asphalt. Construction and Building Materials, 36. pp. 984-989. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.06.015.
Akhtar, Mohammad Nadeem and Ibrahim, Zainah and Bunnori, N. Muhamad and Jameel, Mohammed and Tarannum, Nazia and Akhtar, J.N. (2021) Performance of sustainable sand concrete at ambient and elevated temperature. Construction and Building Materials, 280. p. 122404. ISSN 09500618, DOI https://doi.org/10.1016/j.conbuildmat.2021.122404.
Al-Kubaisy, M.A. and Jumaat, Mohd Zamin (2000) Flexural behaviour of reinforced concrete slabs with ferrocement tension zone cover. Construction and Building Materials, 14 (5). pp. 245-252. ISSN 0950-0618, DOI https://doi.org/10.1016/S0950-0618(00)00019-2.
Al-Mansob, R.A. and Ismail, A. and Yusoff, N.I.M. and Albrka, S.I. and Azhari, C.H. and Karim, M.R. (2016) Rheological characteristics of unaged and aged epoxidised natural rubber modified asphalt. Construction and Building Materials, 102 (Part 1). pp. 190-199. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.10.133.
Alani, Aktham H. and Johari, Megat Azmi Megat and Noaman, Ahmed Tareq and Muhamad Bunnori, Norazura and Majid, T. A. (2022) Effect of the incorporation of PET fiber and ternary blended binder on the flexural and tensile behaviour of ultra-high performance green concrete. Construction and Building Materials, 331. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2022.127306.
Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Mahmud, H. and Fayyadh, M.M. (2011) Shear behaviour of reinforced palm kernel shell concrete beams. Construction and Building Materials, 25 (6). pp. 2918-2927. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2010.12.032.
Alengaram, Ubagaram Johnson and Mohottige, N.H.W. and Wu, C. and Jumaat, Mohd Zamin and Yap, Soon Poh and Wang, Z. (2016) Response of oil palm shell concrete slabs subjected to quasi-static and blast loads. Construction and Building Materials, 116. pp. 391-402. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.04.103.
Alengaram, Ubagaram Johnson and Muhit, B.A.A and Jumaat, Mohd Zamin (2013) Utilization of oil palm kernel shell as lightweight aggregate in concrete - a review. Construction and Building Materials, 38. pp. 161-172. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.08.026.
Alnahhal, Ahmed Mahmoud and Alengaram, Ubagaram Johnson and Ibrahim, Muhammad Shazril Idris and Yusoff, Sumiani and Metselaar, Hendrik Simon Cornelis and Johnson, Petrina Gabriela (2022) Synthesis of ternary binders and sand-binder ratio on the mechanical and microstructural properties of geopolymer foamed concrete. Construction and Building Materials, 349. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2022.128682.
Alnahhal, Ahmed Mahmoud and Alengaram, Ubagaram Johnson and Yusoff, Sumiani and Darvish, Pouya Hassan and Srinivas, Karthick and Sumesh, M. (2022) Engineering performance of sustainable geopolymer foamed and non-foamed concretes. Construction and Building Materials, 316. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2021.125601.
Alnahhal, Mohammed Fouad and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Alsubari, Belal and Alqedra, Mamoun A. and Mo, Kim Hung (2018) Effect of aggressive chemicals on durability and microstructure properties of concrete containing crushed new concrete aggregate and non-traditional supplementary cementitious materials. Construction and Building Materials, 163. pp. 482-495. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2017.12.106.
Alsubari, Belal and Shafigh, Payam and Ibrahim, Zainah and Alnahhal, Mohammed Fouad and Jumaat, Mohd Zamin (2018) Properties of eco-friendly self-compacting concrete containing modified treated palm oil fuel ash. Construction and Building Materials, 158. pp. 742-754. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2017.09.174.
Alsubari, Belal and Shafigh, Payam and Ibrahim, Zainah and Jumaat, Mohd Zamin (2018) Heat-treated palm oil fuel ash as an effective supplementary cementitious material originating from agriculture waste. Construction and Building Materials, 167. pp. 44-54. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2018.01.134.
Aprianti, E. and Shafigh, P. and Bahri, S. and Farahani, J.N. (2015) Supplementary cementitious materials origin from agricultural wastes - A review. Construction and Building Materials, 74. pp. 176-187. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2014.10.010.
Aprianti, E. and Shafigh, P. and Zawawi, R. and Abu Hassan, Z.F. (2016) Introducing an effective curing method for mortar containing high volume cementitious materials. Construction and Building Materials, 107. pp. 365-377. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.12.100.
Asadi, Iman and Shafigh, Payam and Hashemi, Mohammad and Akhiani, Amir Reza and Maghfouri, Mehdi and Sajadi, Behrang and Mahyuddin, Norhayati and Esfandiari, Masoud and Talebi, Hamed Rezaei and Metselaar, Hendrik Simon Cornelis (2021) Thermophysical properties of sustainable cement mortar containing oil palm boiler clinker (OPBC) as a fine aggregate. Construction and Building Materials, 268. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2020.121091.
Aslam, M. and Shafigh, P. and Jumaat, Mohd Zamin and Shah, S.N.R. (2015) Strengthening of RC beams using prestressed fiber reinforced polymers - A review. Construction and Building Materials, 82. pp. 235-256. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.02.051.
Asli, H. and Ahmadinia, E. and Zargar, M. and Karim, Mohamed Rehan (2012) Investigation on physical properties of waste cooking oil - Rejuvenated bitumen binder. Construction and Building Materials, 37. pp. 398-405. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.07.042.
Baghaee Moghaddam, T. and Karim, Mohamed Rehan and Syammaun, T. (2012) Dynamic properties of stone mastic asphalt mixtures containing waste plastic bottles. Construction and Building Materials, 34. pp. 236-242. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.02.054.
Ban, Cheah Chee and Ee, Tan Leng and Ramli, Mahyuddin and Md Akil, Hazizan and Mo, Kim Hung (2022) Properties and microstructure of lime kiln dust activated slag-fly ash mortar. Construction and Building Materials, 347. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2022.128518.
Basha, E.A. and Hashim, Roslan and Mahmud, H.B. and Muntohar, A.S. (2005) Stabilization of residual soil with rice husk ash and cement. Construction and Building Materials, 19 (6). pp. 448-453. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2004.08.001.
Bashar, I.I. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Islam, A. and Santhi, H. and Sharmin, A. (2016) Engineering properties and fracture behaviour of high volume palm oil fuel ash based fibre reinforced geopolymer concrete. Construction and Building Materials, 111. pp. 280-297. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.02.022.
Bashar, Iftekhair Ibnul and Alengaram, U. Johnson and Jumaat, Mohd Zamin (2022) Enunciation of embryonic palm oil clinker based geopolymer concrete and its engineering properties. Construction and Building Materials, 318. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2021.125975.
Behnia, A. and Ranjbar, N. and Chai, H.K. and Masaeli, M. (2016) Failure prediction and reliability analysis of ferrocement composite structures by incorporating machine learning into acoustic emission monitoring technique. Construction and Building Materials, 122. pp. 823-832. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.06.130.
Drissi, Sarra and Ling, Tung Chai and Mo, Kim Hung (2020) Development of leak-free phase change material aggregates. Construction and Building Materials, 230. p. 117029. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2019.117029.
Fayyadh, M.M. and Razak, Hashim Abdul (2012) Assessment of effectiveness of CFRP repaired RC beams under different damage levels based on flexural stiffness. Construction and Building Materials, 37. pp. 125-134. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.07.021.
Fayyadh, M.M. and Razak, Hashim Abdul (2012) Condition assessment of elastic bearing supports using vibration data. Construction and Building Materials, 30. pp. 616-628. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2011.12.043.
Fayyadh, Moatasem M. and Razak, Hashim Abdul (2022) Impact of design parameters and cycles of damage loads on CFRP repair effectiveness of shear-deficient RC structures. Construction and Building Materials, 347. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2022.128465.
Ghayed, H.H. and Razak, H.A. and Sulong, N.H.R. (2017) Development and testing of hybrid precast concrete beam-to-column connections under cyclic loading. Construction and Building Materials, 151. pp. 258-278. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2017.06.073.
Hamim, Asmah and Yusoff, Nur Izzi Md and Ceylan, Halil and Rosyidi, Sri Atmaja P. and El-Shafie, Ahmed (2018) Comparative study on using static and dynamic finite element models to develop FWD measurement on flexible pavement structures. Construction and Building Materials, 176. pp. 583-592. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2018.05.082.
Hashemi, Mohammad and Shafigh, Payam and Karim, Mohamed Rehan and Atis, Cengiz Duran (2018) The effect of coarse to fine aggregate ratio on the fresh and hardened properties of roller-compacted concrete pavement. Construction and Building Materials, 169. pp. 553-566. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2018.02.216.
Hashemi, Sajedeh Sadat Ghazizadeh and Mahmud, Hilmi and Tan, Chee Ghuan and Ang, Bee Chin and Kuenzel, Carsten and Ranjbar, Navid (2019) Safe disposal of coal bottom ash by solidification and stabilization techniques. Construction and Building Materials, 197. pp. 705-715. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2018.11.123.
Hosen, Md Akter and Jumaat, Mohd Zamin and Alengaram, Ubagaram Johnson and Ramli Sulong, Nor Hafizah (2018) CFRP strips for enhancing flexural performance of RC beams by SNSM strengthening technique. Construction and Building Materials, 165. pp. 28-44. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2017.12.052.
Huda, M.N. and Jumaat, Mohd Zamin and Islam, A.B.M.S. (2016) Flexural performance of reinforced oil palm shell & palm oil clinker concrete (PSCC) beam. Construction and Building Materials, 127. pp. 18-25. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.09.106.
Islam, A. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Bashar, I.I. and Kabir, S.M.A. (2015) Engineering properties and carbon footprint of ground granulated blast-furnace slag-palm oil fuel ash-based structural geopolymer concrete. Construction and Building Materials, 101 (1). pp. 503-521. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.10.026.
Jumaat, Mohd Zamin and Alengaram, Ubagaram Johnson and Ahmmad, R. and Bahri, S. and Islam, A.B.M.S. (2015) Characteristics of palm oil clinker as replacement for oil palm shell in lightweight concrete subjected to elevated temperature. Construction and Building Materials, 101 (pt.1). pp. 942-951. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.10.104.
Jumaat, Mohd Zamin and Rahim, A.H.A. and Othman, J. and Midon, M.S. (2006) Strength evaluation of oil palm stem trussed rafters. Construction and Building Materials, 20 (9). pp. 812-818. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2005.01.049.
Kalantar, Z.N. and Karim, Mohamed Rehan and Mahrez, A. (2012) A review of using waste and virgin polymer in pavement. Construction and Building Materials, 33. pp. 55-62. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.01.009.
Kanagaraj, Balamurali and Anand, N. and Alengaram, U. Johnson and Raj, R. Samuvel and Kiran, Tattukolla (2022) Exemplification of sustainable sodium silicate waste sediments as coarse aggregates in the performance evaluation of geopolymer concrete. Construction and Building Materials, 330. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2022.127135.
Karim, M.R. and Hashim, H. and Abdul Razak, H. (2016) Assessment of pozzolanic activity of palm oil clinker powder. Construction and Building Materials, 127. pp. 335-343. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.10.002.
Khaleel, O.R. and Razak, Hashim Abdul (2012) The effect of powder type on the setting time and self compactability of mortar. Construction and Building Materials, 36. pp. 20-26. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.04.079.
Leong, Sing Wong and Hashim, Roslan and Ali, Faisal (2013) Improved strength and reduced permeability of stabilized peat: Focus on application of kaolin as a pozzolanic additive. Construction and Building Materials, 40. pp. 783-792. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.11.065.
Mo, K.H. and Alengaram, Ubagaram Johnson and Visintin, P. and Goh, S.H. and Jumaat, Mohd Zamin (2015) Influence of lightweight aggregate on the bond properties of concrete with various strength grades. Construction and Building Materials, 84. pp. 377-386. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.03.040.
Mo, Kim Hung and Lee, Hong Jie and Liu, Michael Yong Jing and Ling, Tung Chai (2018) Incorporation of expanded vermiculite lightweight aggregate in cement mortar. Construction and Building Materials, 179. pp. 302-306. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2018.05.219.
Mo, Kim Hung and Ling, Tung-Chai and Tan, Tee How and Leong, Geok Wen and Yuen, Choon Wah and Shah, Syed Nasir (2021) Alkali-silica reactivity of lightweight aggregate: A brief overview. Construction and Building Materials, 270. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2020.121444.
Mo, Kim Hung and Yeoh, K.H. and Bashar, I.I. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin (2017) Shear behaviour and mechanical properties of steel fibre-reinforced cement-based and geopolymer oil palm shell lightweight aggregate concrete. Construction and Building Materials, 148. pp. 369-375. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2017.05.017.
Mohammadhassani, M. and Jumaat, Mohd Zamin and Jameel, M. (2012) Experimental investigation to compare the modulus of rupture in high strength self compacting concrete deep beams and high strength concrete normal beams. Construction and Building Materials, 30. pp. 265-273. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2011.12.004.
Narmashiri, K. and Ramli Sulong, Nor Hafizah and Jumaat, Mohd Zamin (2012) Failure analysis and structural behaviour of CFRP strengthened steel I-beams. Construction and Building Materials, 30. pp. 1-9. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2011.11.009.
Nayaka, R. Ramesh and Alengaram, U. Johnson and Jumaat, Mohd Zamin and Fonseca, Fernando S. and Banerjee, Anish (2021) Structural performance of masonry prisms, wallettes and walls containing high volume of industrial by-products-Sustainable housing perspective. Construction and Building Materials, 303. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2021.124439.
Nayaka, Ramappa Ramesh and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Yusoff, Sumiani (2018) Microstructural investigation and durability performance of high volume industrial by-products-based masonry mortars. Construction and Building Materials, 189. pp. 906-923. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2018.09.020.
Obaydullah, M. and Jumaat, Mohd Zamin and Alengaram, Ubagaram Johnson and Darain, K.M.U. and Huda, M.N. and Hosen, M.A. (2016) Prestressing of NSM steel strands to enhance the structural performance of prestressed concrete beams. Construction and Building Materials, 129. pp. 289-301. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.10.077.
Qeshta, I.M.I. and Shafigh, P. and Jumaat, Mohd Zamin (2015) Flexural behaviour of RC beams strengthened with wire mesh-epoxy composite. Construction and Building Materials, 79. pp. 104-114. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.01.013.
Radwan, Mohammed K. H. and Mo, Kim Hung and Onn, Chiu Chuen and Ng, Chee Guan and Ling, Tung-Chai (2021) Waste press mud in enhancing the performance of glass powder blended cement. Construction and Building Materials, 313. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2021.125469.
Radwan, Mohammed K.H. and Mo, Kim Hung and Onn, Chiu Chuen and Ng, Chee Guan and Ling, Tung Chai (2021) Waste press mud in enhancing the performance of glass powder blended cement. Construction and Building Materials, 313. p. 125469. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2021.125469.
Rahmad, Suzielah and Rosyidi, Sri Atmaja P. and Memon, Naeem Aziz and Badri, Khairiah Haji and Widyatmoko, Iswandaru and Arshad, Ahmad Kamil and Koting, Suhana and Yusoff, Nur Izzi Md and Hainin, Mohd Rosli (2021) Physical, thermal and micro-surface characteristics of PG76 binder incorporated with liquid chemical WMA additive. Construction and Building Materials, 272. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2020.121626.
Rahman, M.M. and Jumaat, Mohd Zamin and Rahman, M.A. and Qeshta, I.M.I. (2015) Innovative hybrid bonding method for strengthening reinforced concrete beam in flexure. Construction and Building Materials, 79. pp. 370-378. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2014.12.081.
Ranjbar, N. and Behnia, A. and Chai, H.K. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin (2016) Fracture evaluation of multi-layered precast reinforced geopolymer-concrete composite beams by incorporating acoustic emission into mechanical analysis. Construction and Building Materials, 127. pp. 274-283. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.09.144.
Said, S.H. and Razak, Hashim Abdul and Othman, I. (2015) Flexural behavior of engineered cementitious composite (ECC) slabs with polyvinyl alcohol fibers. Construction and Building Materials, 75. pp. 176-188. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2014.10.036.
Sajedi, F. and Razak, Hashim Abdul (2011) Comparison of different methods for activation of ordinary Portland cement-slag mortars. Construction and Building Materials, 25 (1). pp. 30-38. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2010.06.060.
Sajedi, F. and Razak, Hashim Abdul (2011) Effects of curing regimes and cement fineness on the compressive strength of ordinary Portland cement mortars. Construction and Building Materials, 25 (4). pp. 2036-2045. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2010.11.043.
Sajedi, F. and Razak, Hashim Abdul (2010) The effect of chemical activators on early strength of ordinary Portland cement-slag mortars. Construction and Building Materials, 24 (10). pp. 1944-1951. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2010.04.006.
Sajedi, F. and Razak, Hashim Abdul and Mahmud, H.B. and Shafigh, P. (2012) Relationships between compressive strength of cement-slag mortars under air and water curing regimes. Construction and Building Materials, 31. pp. 188-196. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2011.12.056.
Shafigh, P. and Jumaat, Mohd Zamin and Bin Mahmud, H. and Hamid, N.A.A. (2012) Lightweight concrete made from crushed oil palm shell: tensile strength and effect of initial curing on compressive strength. Construction and Building Materials, 27 (1). pp. 252-258. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2011.07.051.
Shafigh, P. and Jumaat, Mohd Zamin and Mahmud, H. (2011) Oil palm shell as a lightweight aggregate for production high strength lightweight concrete. Construction and Building Materials, 25 (4). pp. 1848-1853. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2010.11.075.
Shafigh, P. and Jumaat, Mohd Zamin and Mahmud, Hilmi and Alengaram, Ubagaram Johnson (2013) Oil palm shell lightweight concrete containing high volume ground granulated blast furnace slag. Construction and Building Materials, 40. pp. 231-238. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2012.10.007.
Shah, Syed Nasir and Mo, Kim Hung and Yap, Soon Poh and Radwan, Mohammed K. H. (2021) Effect of micro-sized silica aerogel on the properties of lightweight cement composite. Construction and Building Materials, 290. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2021.123229.
Shahid, Khairul Anuar and Bunnori, Norazura Muhamad and Megat Johari, Megat Azmi and Hassan, Mohd H. and Sani, Ashiru (2020) Assessment of corroded reinforced concrete beams: Cyclic load test and acoustic emission techniques. Construction and Building Materials, 233. p. 117291. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2019.117291.
Sumesh, M. and Alengaram, Ubagaram Johnson and Jumaat, Mohd Zamin and Mo, Kim Hung and Alnahhal, M.F. (2017) Incorporation of nano-materials in cement composite and geopolymer based paste and mortar – A review. Construction and Building Materials, 148. pp. 62-84. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2017.04.206.
Tang, Chenxi and Ling, Tung-Chai and Mo, Kim Hung (2021) Raman spectroscopy as a tool to understand the mechanism of concrete durability-A review. Construction and Building Materials, 268. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2020.121079.
Tiong, Michelle and Li, Xuemiao and Mo, Kim Hung and Ling, Tung-Chai (2022) Effects of moulding pressure and w/c induced pore water saturation on the CO2 curing efficiency of dry-mix cement blocks. Construction and Building Materials, 335. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2022.127509.
Wang, Yingting and Mo, Kim Hung and Du, Hongjian and Ling, Tung-Chai (2022) Effects of CO2 curing treatment on alkali-silica reaction of mortars containing glass aggregate. Construction and Building Materials, 323. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2022.126637.
Yew, M.K. and Mahmud, H.B. and Ang, B.C. and Yew, M.C. (2015) Influence of different types of polypropylene fibre on the mechanical properties of high-strength oil palm shell lightweight concrete. Construction and Building Materials, 90. pp. 36-43. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2015.04.024.
Yong, Chee Lok and Mo, Kim Hung and Koting, Suhana (2022) Phosphorus slag in supplementary cementitious and alkali activated materials: A review on activation methods. Construction and Building Materials, 352. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2022.129028.
Zaki, A. and Chai, H.K. and Behnia, A. and Aggelis, D.G. and Tan, J.Y. and Ibrahim, Z. (2017) Monitoring fracture of steel corroded reinforced concrete members under flexure by acoustic emission technique. Construction and Building Materials, 136. pp. 609-618. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2016.11.079.
Zhang, Longjian and Mo, Kim Hung and Yap, Soon Poh and Gencel, Osman and Ling, Tung-Chai (2022) Mechanical strength, water resistance and drying shrinkage of lightweight hemihydrate phosphogypsum-cement composite with ground granulated blast furnace slag and recycled waste glass. Construction and Building Materials, 345. ISSN 0950-0618, DOI https://doi.org/10.1016/j.conbuildmat.2022.128232.
