 | Up a level |
Abd Rahman, Nurul Izzah and Md Dawal, Siti Zawiah and Yusoff, Nukman (2020) Driving mental workload and performance of ageing drivers. Transportation Research Part F-Traffic Psychology and Behaviour, 69. pp. 265-285. ISSN 1369-8478, DOI https://doi.org/10.1016/j.trf.2020.01.019.
Abdulrazzaq, Tuqa and Togun, Hussein and Reza Safaei, Mohammad and Kazi, Salim Newaz and Mohd Ariffin, Mohd Khairol Anuar and Adam, Nor Mariah (2020) Effect of flow separation of TiO2 nanofluid on heat transfer in the annular space of two concentric cylinders. Thermal Science, 24 (2, A). pp. 1007-1018. ISSN 0354-9836, DOI https://doi.org/10.2298/TSCI180709321A.
Ahmed, Waqar and Chowdhury, Z. Z. and Kazi, S. N. and Johan, M. R. and Akram, Naveed and Oon, C. S. (2020) Effect of ZnO-water based nanofluids from sonochemical synthesis method on heat transfer in a circular flow passage. International Communications in Heat and Mass Transfer, 114. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2020.104591.
Akram, Naveed and Sadri, Rad and Kazi, S. N. and Zubir, Mohd Nashrul Mohd and Ridha, Mohd and Ahmed, Waqar and Soudagar, Manzoore Elahi M. and Arzpeyma, Mazdak (2020) A comprehensive review on nanofluid operated solar flat plate collectors. Journal of Thermal Analysis and Calorimetry, 139 (2). pp. 1309-1343. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-019-08514-z.
Alawi, Omer A. and Mallah, A. R. and Kazi, S. N. (2020) Covalently functionalized pentaethylene glycol-thermally treated graphene towards enhanced thermophysical and heat transfer characteristics. Journal of Thermal Analysis and Calorimetry, 140 (2). pp. 859-874. ISSN 1388-6150, DOI https://doi.org/10.1007/s10973-019-08831-3.
Ali, Salman and Tahir, Muhammad and Mehboob, Nasir and Wahab, Fazal and Langford, Steven J. and Said, Suhana Mohd and Sarker, Mahidur R. and Julai, Sabariah and Ali, Sawal Hamid Md (2020) Amino anthraquinone: Synthesis, characterization, and its application as an active material in environmental sensors. Materials, 13 (4). ISSN 1996-1944, DOI https://doi.org/10.3390/ma13040960.
Alias, Rodianah and Mahmoodian, Reza and Abd Shukor, Mohd (2020) Effect of temperature ramp rate on the morphology, phase and adhesion strength of Ag-Ta2O5 thin film. JOMME, 72 (2). pp. 697-705. ISSN 10474838, DOI https://doi.org/10.1007/s11837-019-03794-0.
Anis, Shazia and Lai, Khin Wee and Chuah, Joon Huang and Ali, Shoaib Mohammad and Mohafez, Hamidreza and Hadizadeh, Maryam and Yan, Ding and Ong, Zhi-Chao (2020) An overview of deep learning approaches in chest radiograph. IEEE Access, 8. pp. 182347-182354. ISSN 2169-3536, DOI https://doi.org/10.1109/ACCESS.2020.3028390.
Annuar, N. Syahira M. and Mahmoodian, Reza and Abd Shukor, Mohd Hamdi (2020) Effect of focused ion beam process parameter on Tin-Nickel-Copper micropillars microfabrication. Materials and Manufacturing Processes, 35 (2). pp. 163-171. ISSN 1042-6914, DOI https://doi.org/10.1080/10426914.2020.1711923.
Ansu, Alok Kumar and Sharma, Ravi K. and Tyagi, Vineet V. and Sari, Ahmet and Ganesan, Poobalan and Tripathi, Dharmendra (2020) A cycling study for reliability, chemical stability and thermal durability of polyethylene glycols of molecular weight 2000 and 10000 as organic latent heat thermal energy storage materials. International Journal of Energy Research, 44 (3). pp. 2183-2195. ISSN 0363-907X, DOI https://doi.org/10.1002/er.5079.
Arafat, M. M. and Rozali, S. and Haseeb, A. S. M. A. and Ibrahim, S. (2020) Direct and catalyst-free synthesis of ZnO nanowires on brass by thermal oxidation. Nanotechnology, 31 (17). ISSN 0957-4484, DOI https://doi.org/10.1088/1361-6528/ab69b3.
Aslfattahi, Navid and Saidur, R. and Arifutzzaman, A. and Sadri, R. and Bimbo, Nuno and Sabri, Mohd Faizul Mohd and Maughan, Philip A. and Bouscarrat, Luc and Dawson, Richard J. and Said, Suhana Mohd and Goh, Boon Tong and Sidik, Nor Azwadi Che (2020) Experimental investigation of energy storage properties and thermal conductivity of a novel organic phase change material/MXene as A new class of nanocomposites. Journal of Energy Storage, 27. ISSN 2352-152X, DOI https://doi.org/10.1016/j.est.2019.101115.
Aunkor, Md. Toasin Hossain and Raihan, Topu and Prodhan, Shamsul H. and Metselaar, Hendrik Simon Cornelis and Malik, Syeda Umme Fahmida and Azad, Abul Kalam (2020) Antibacterial activity of graphene oxide nanosheet against multidrug resistant superbugs isolated from infected patients. Royal Society Open Science, 7 (7). ISSN 2054-5703, DOI https://doi.org/10.1098/rsos.200640.
Awang, Muhamad Sharul Nizam and Mohd Zulkifli, Nurin Wahidah and Abbas, Muhammad Mujtaba and Zulkifli, Syahir Amzar and Mohd Yusoff, Mohd Nur Ashraf and Ahmad, Muhammad Hazwan and Wan Daud, Wan Mohd Ashri (2020) Effect of blending local plastic pyrolytic oil with diesel on lubricity. Jurnal Tribologi, 27. pp. 143-157. ISSN 2289-7232,
Bayrami, Abolfazl and Shirdel, Arezoo and Pouran, Shima Rahim and Mahmoudi, Fariba and Habibi-Yangjeh, Aziz and Singh, Ramesh and Raman, Abdul Aziz Abdul (2020) Co-regulative effects of chitosan-fennel seed extract system on the hormonal and biochemical factors involved in the polycystic ovarian syndrome. Materials Science and Engineering C, 117. ISSN 09284931, DOI https://doi.org/10.1016/j.msec.2020.111351.
Bin Zahid, Fahad and Ong, Zhi Chao and Khoo, Shin Yee (2020) A review of operational modal analysis techniques for in-service modal identification. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42 (8). ISSN 1678-5878, DOI https://doi.org/10.1007/s40430-020-02470-8.
Butt, Abdul Hadi and Akbar, Bilal and Aslam, Jawad and Akram, Naveed and Soudagar, Manzoore Elahi M. and Garcia Marquez, Fausto Pedro and Younis, Md. Yamin and Uddin, Emad (2020) Development of a linear acoustic array for aero-acoustic quantification of camber-bladed Vertical Axis Wind Turbine. Sensors, 20 (20). ISSN 1424-8220, DOI https://doi.org/10.3390/s20205954.
Chong, Mei Yan and Gu, Boram and Chan, Bee Ting and Ong, Zhi Chao and Xu, Xiao Yun and Lim, Einly (2020) Effect of intimal flap motion on flow in acute type B aortic dissection by using fluid-structure interaction. International Journal for Numerical Methods in Biomedical Engineering, 36 (12). ISSN 2040-7939, DOI https://doi.org/10.1002/cnm.3399.
Cui, Yonggang and Lam, Wei Haur and Ong, Zhi Chao and Ling, Lloyd and Siow, Chee Loon and Robinson, Desmond and Hamill, Gerard (2020) Experimental scours by impinging twin-propeller jets at Quay Wall. Journal of Marine Science and Engineering, 8 (11). ISSN 2077-1312, DOI https://doi.org/10.3390/jmse8110872.
Dalkilic, Ahmet Selim and Celen, Ali and Erdogan, Murat and Sakamatapan, Kittipong and Newaz, Kazi Salim and Wongwises, Somchai (2020) Effect of saturation temperature and vapor quality on the boiling heat transfer and critical heat flux in a microchannel. International Communications in Heat and Mass Transfer, 117. ISSN 0735-1933, DOI https://doi.org/10.1016/j.icheatmasstransfer.2020.104768.
El-Seesy, Ahmed I. and Hassan, Hamdy and Ibraheem, Latif and He, Zhixia and Soudagar, Manzoore Elahi M. (2020) Combustion, emission, and phase stability features of a diesel engine fueled by Jatropha/ethanol blends and n-butanol as co-solvent. International Journal Of Green Energy, 17 (12). pp. 793-804. ISSN 15435075, DOI https://doi.org/10.1080/15435075.2020.1798770.
Equbal, Azhar and Shamim, Mohammad and Badruddin, Irfan Anjum and Equbal, Israr and Sood, Anoop Kumar and Ghazali, Nik Nazri Nik and Khan, Zahid A. (2020) Application of the combined ANN and GA for multi-response optimization of cutting parameters for the turning of glass fiber-reinforced polymer composites. Mathematics, 8 (6). ISSN 2227-7390, DOI https://doi.org/10.3390/MATH8060947.
Faizal, W. M. and Ghazali, N. N. N. and Khor, C. Y. and Badruddin, Irfan Anjum and Zainon, Mohd Zamri and Ahmad Yazid, Aznijar and Ibrahim, Norliza Binti and Razi, Roziana Mohd (2020) Computational fluid dynamics modelling of human upper airway: A review. Computer Methods and Programs in Biomedicine, 196. ISSN 0169-2607, DOI https://doi.org/10.1016/j.cmpb.2020.105627.
Farade, Rizwan A. and Wahab, Noor Izzri Abdul and Mansour, Diaa-Eldin A. and Azis, Norhafiz and Jasni, Jasronita and Soudagar, Manzoore Elahi M. and Siddappa, Vasudevamurthy (2020) Development of graphene oxide-based nonedible cottonseed nanofluids for power transformers. Materials, 13 (11). ISSN 19961944,
Gavhane, Rakhamaji S. and Kate, Ajit M. and Pawar, Abhay and Safaei, Mohammad Reza and Soudagar, Manzoore Elahi M. and Abbas, Muhammad Mujtaba and Ali, Hafiz Muhammad and Banapurmath, Nagaraj R. and Goodarzi, Marjan and Badruddin, Irfan Anjum and Ahmed, Waqar and Shahapurkar, Kiran (2020) Effect of zinc oxide Nano-additives and soybean biodiesel at varying loads and compression ratios on VCR diesel engine characteristics. Symmetry-Basel, 12 (6). ISSN 20738994,
Gul, M. and Masjuki, Haji Hassan and Kalam, M. A. and Zulkifli, N. W. M. and Mujtaba, M. A. (2020) A review: Role of fatty acids composition in characterizing potential feedstock for sustainable green lubricants by advance transesterification process and its global as well as Pakistani prospective. Bioenergy Research, 13 (1). pp. 1-22. ISSN 1939-1234, DOI https://doi.org/10.1007/s12155-019-10040-7.
Gul, M. and Zulkifli, Nurin Wahidah Mohd and Masjuki, H. H. and Kalam, M. A. and Mujtaba, M. A. and Harith, M. H. and Syahir, A. Z. and Ahmed, Waqar and Farooq, Abdul Bari (2020) Effect of TMP-based-cottonseed oil-biolubricant blends on tribological behavior of cylinder liner-piston ring combinations. Fuel, 278. ISSN 0016-2361, DOI https://doi.org/10.1016/j.fuel.2020.118242.
Hamza, Mukhtar Fatihu and Raja Ghazilla, Raja Arif and Muhammad, Bashir Bala and Yap, Hwa Jen (2020) Balance and stability issues in lower extremity exoskeletons: A systematic review. Biocybernetics and Biomedical Engineering, 40 (4). pp. 1666-1679. ISSN 0208-5216, DOI https://doi.org/10.1016/j.bbe.2020.09.004.
Harari, P. A. and Banapurmath, N. R. and Yaliwal, V. S. and Khan, T. M. Yunus and Soudagar, Manzoore Elahi M. and Sajjan, A. M. (2020) Experimental studies on performance and emission characteristics of reactivity controlled compression ignition (RCCI) engine operated with gasoline and Thevetia Peruviana biodiesel. RENEWABLE ENERGY, 160. pp. 865-875. ISSN 09601481, DOI https://doi.org/10.1016/j.renene.2020.07.009.
Hashim, Luqman H. and Halilu, Ahmed and Sudarsanam, Putla and Umar, Yahaya Balarabe and Johan, Mohd Rafie and Bhargava, Suresh K. (2020) Bifunctional rice husk-derived SiO2-Cu-Al-Mg nanohybrid catalyst for one-pot conversion of biomass-derived furfural to furfuryl acetate. Fuel, 275. ISSN 00162361, DOI https://doi.org/10.1016/j.fuel.2020.117953.
Hussain, Fayaz and Soudagar, Manzoore Elahi M. and Afzal, Asif and Mujtaba, M. A. and Fattah, I. M. Rizwanul and Naik, Bharat and Mulla, Mohammed Huzaifa and Badruddin, Irfan Anjum and Khan, T. M. Yunus and Raju, Vallapudi Dhana and Gavhane, Rakhamaji S. and Rahman, S. M. Ashrafur (2020) Enhancement in Combustion, Performance, and Emission Characteristics of a Diesel Engine Fueled with Ce-ZnO Nanoparticle Additive Added to Soybean Biodiesel Blends. ENERGIES, 13 (17). ISSN 19961073, DOI https://doi.org/10.3390/en13174578.
Ibrahim, Mahmoud Z. and Sarhan, Ahmed A. D. and Kuo, T. Y. and Yusof, Farazila and Hamdi, M. and Lee, T. M. (2020) Developing a new laser cladded FeCrMoCB metallic glass layer on nickel-free stainless-steel as a potential superior wear-resistant coating for joint replacement implants. Surface & Coatings Technology, 392. ISSN 02578972, DOI https://doi.org/10.1016/j.surfcoat.2020.125755.
Ikram, Rabia and Jan, Badrul Mohamed and Ahmad, Waqas (2020) An overview of industrial scalable production of graphene oxide and analytical approaches for synthesis and characterization. Journal of Materials Research and Technology-JMR&T, 9 (5). pp. 11587-11610. ISSN 22387854, DOI https://doi.org/10.1016/j.jmrt.2020.08.050.
Kong, Kok-Haw and Chong, Wen Tong and Koh, Voon Li (2020) Energy savings of a hybrid reversible ventilation system in a basement parking structure. Journal of the Chinese Society of Mechanical Engineers, 41 (1). pp. 99-105. ISSN 0257-9731,
Kwan, Zhenli and Khairu Najhan, Nur Nadirah and Yau, Yat Huang and Luximon, Yan and Nor, Fethma M. (2020) Anticipating local flapsclosed-formsolution on3Dface models using finite element method. International Journal for Numerical Methods in Biomedical Engineering, 36 (11). ISSN 2040-7939, DOI https://doi.org/10.1002/cnm.3390.
Li, Hai and Khoo, Selina and Yap, Hwa Jen (2020) Differences in motion accuracy of Baduanjin between novice and senior students on inertial sensor measurement systems. Sensors, 20 (21). ISSN 1424-8220, DOI https://doi.org/10.3390/s20216258.
Lin, Bo-Jhih and Chen, Wei-Hsin and Lin, Yu-Ying and Chang, Jo-Shu and Farooq, Abid and Singh, Yashvir and Ong, Hwai Chyuan and Show, Pau Loke (2020) An evaluation of thermal characteristics of bacterium Actinobacillus succinogenes for energy use and circular bioeconomy. Bioresource Technology, 301. ISSN 0960-8524, DOI https://doi.org/10.1016/j.biortech.2020.122774.
Mallah, Abdul Rahman and Zubir, Mohd Nashrul Mohd and Alawi, Omer A. and Kazi, Md Salim Newaz and Ahmed, Syed M. and Oon, Cheen Sean and Mohamad, Ahmad Badarudin (2020) An innovative, high-efficiency silver/silica nanocomposites for direct absorption concentrating solar thermal power. International Journal of Energy Research, 44 (12, SI). pp. 9438-9453. ISSN 0363-907X, DOI https://doi.org/10.1002/er.4994.
Mardziah, C. M. and Ramesh, S. and Wahid, M. F. Abdul and Chandran, Hari and Sidhu, Amritpal and Krishnasamy, S. and Purbolaksono, J. (2020) Effect of zinc ions on the structural characteristics of hydroxyapatite bioceramics. Ceramics International, 46 (9). pp. 13945-13952.
Mazumder, Subhrojyoti and Metselaar, Hendrik Simon Cornelis and Sukiman, Nazatul Liana and Zulkifli, Nurin Wahidah Mohd (2020) An overview of fluoride-based solid lubricants in sliding contacts. Journal of the European Ceramic Society, 40 (15). pp. 4974-4996. ISSN 0955-2219, DOI https://doi.org/10.1016/j.jeurceramsoc.2020.04.046.
Mehboob, Hassan and Tarlochan, Faris and Mehboob, Ali and Chang, Seung-Hwan and Ramesh, S. and Harun, Wan Sharuzi Wan and Kadirgama, Kumaran (2020) A novel design, analysis and 3D printing of Ti-6Al-4V alloy bio-inspired porous femoral stem. Journal of Materials Science-Materials in Medicine, 31 (9). ISSN 0957-4530, DOI https://doi.org/10.1007/s10856-020-06420-7.
Mounis, Shawgi Y. A. and Azlan, Norsinnira Zainul and Sado, Fatai (2020) Assist-as-needed robotic rehabilitation strategy based on z-spline estimated functional ability. IEEE Access, 8. pp. 157557-157571. ISSN 2169-3536, DOI https://doi.org/10.1109/ACCESS.2020.3019450.
Muhamad, M. R. and Jamaludin, Mohd Fadzil and Yusof, Farazila and Mahmoodian, R. and Morisada, Y. and Suga, T. and Fujii, H. (2020) Effects of Al-Ni powder addition on dissimilar friction stir welding between AA7075-T6 and 304 LAuswirkungen der Al-Ni-Pulverzugabe beim artfremden Ruhrreibschweissen zwischen AA7075-T6 und 304 L. Materialwissenschaft Und Werkstofftechnik, 51 (9). pp. 1274-1284. DOI https://doi.org/10.1002/mawe.201900105.
Mujtaba, M. A. and Kalam, M. A. and Masjuki, H. H. and Gul, M. and Soudagar, Manzoore Elahi M. and Ong, Hwai Chyuan and Ahmed, Waqar and Atabani, A. E. and Razzaq, L. and Yusoff, Mnam (2020) Comparative study of nanoparticles and alcoholic fuel additives-biodiesel-diesel blend for performance and emission improvements. FUEL, 279. ISSN 00162361, DOI https://doi.org/10.1016/j.fuel.2020.118434.
Mujtaba, M. A. and Masjuki, H. H. and Kalam, M. A. and Noor, Fahad and Farooq, Muhammad and Ong, Hwai Chyuan and Gul, M. and Soudagar, Manzoore Elahi M. and Bashir, Shahid and Rizwanul Fattah, I. M. and Razzaq, L. (2020) Effect of additivized biodiesel blends on diesel engine poerformance, emission, tribological characteristics, and lubricant tribology. Energies, 13 (13). ISSN 1996-1073, DOI https://doi.org/10.3390/en13133375.
Rahim, Aamir A. A. and Musa, S. Nurmaya and Ramesh, S. and Lim, Ming K. (2020) A systematic review on material selection methods. Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 234 (7). pp. 1032-1059. ISSN 1464-4207, DOI https://doi.org/10.1177/1464420720916765.
Rao, Ravinanath Narenthra and Silitonga, Arridina Susan and Shamsuddin, Abd Halim and Milano, Jassinnee and Riayatsyah, Teuku Meurah Indra and Sebayang, A. H. and Nur, Taufiq Bin and Sabri, M. and Yulita, M. R. and Sembiring, R. W. (2020) Effect of ethanol and gasoline blending on the performance of a stationary small single cylinder engine. Arabian Journal for Science and Engineering, 45 (7). pp. 5793-5802. ISSN 2193567X, DOI https://doi.org/10.1007/s13369-020-04567-7.
Razzaq, Luqman and Imran, Shahid and Anwar, Zahid and Farooq, Muhammad and Abbas, Muhammad Mujtaba and Khan, Haris Mehmood and Asif, Tahir and Amjad, Muhammad and Soudagar, Manzoore Elahi M. and Shaukat, Nabeel and Fattah, I. M. Rizwanul and Rahman, S. M. Ashrafur (2020) Maximising yield and engine efficiency using optimised waste cooking oil biodiesel. Energies, 13 (22). ISSN 1996-1073, DOI https://doi.org/10.3390/en13225941.
Reza, Md Sumon and Afroze, Shammya and Bakar, Muhammad S. A. and Saidur, Rahman and Aslfattahi, Navid and Taweekun, Juntakan and Azad, Abul K. (2020) Biochar characterization of invasive Pennisetum purpureum grass: Effect of pyrolysis temperature. Biochar, 2 (2). pp. 239-251. ISSN 25247867, DOI https://doi.org/10.1007/s42773-020-00048-0.
Saad, Mohamad Hanif Md and Sarker, Mahidur R. and Hussain, Aini (2020) Application of complex event processing approaches for intelligent building development: A review. Journal of Ambient Intelligence and Smart Environments, 12 (2). pp. 101-124. ISSN 1876-1364, DOI https://doi.org/10.3233/AIS-200555.
Safarzadeh, M. and Chee, Chin Fei and Ramesh, S. and Fauzi, M. N. Ahmad (2020) Effect of sintering temperature on the morphology, crystallinity and mechanical properties of carbonated hydroxyapatite (CHA). Ceramics International, 46 (17). pp. 26784-26789. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2020.07.153.
Sim, Hoi Yin and Ramli, Rahizar and Saifizul, Ahmad Abdullah (2020) Assessment of characteristics of acoustic emission parameters for valve damage detection under varying compressor speeds. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 234 (17). pp. 3521-3540. ISSN 0954-4062, DOI https://doi.org/10.1177/0954406220915232.
Syahir, A. Z. and Harith, M. H. and Zulkifli, N. W. M. and Masjuki, H. H. and Kalam, M. A. and Yusoff, M. N. A. M. and Zulfattah, Z. M. and Ibrahim, T. M. (2020) Compatibility of ionic liquid with Glycerol Monooleate and Molybdenum Dithiocarbamate as additives in bio-based lubricant. Journal of Tribology-Transactions of the Asme, 142 (6). ISSN 07424787, DOI https://doi.org/10.1115/1.4046122.
Thi, Le Bang and Shi, Rui and Long, Bui Duc and Ramesh, S. and Shi, Xingling and Sugiura, Yuki and Ishikawa, Kunio (2020) Biological responses of MC3T3-E1 on calcium carbonate coatings fabricated by hydrothermal reaction on titanium. Biomedical Materials, 15 (3). ISSN 1748-6041, DOI https://doi.org/10.1088/1748-605X/ab6939.
Ul Islam, Zahoor and Tahir, Muhammad and Syed, Waqar Adil and Aziz, Fakhra and Wahab, Fazal and Said, Suhana Mohd and Sarker, Mahidur R. and Ali, Sawal Hamid Md and Sabri, Mohd Faizul Mohd (2020) Fabrication and Photovoltaic Properties of Organic Solar Cell Based on Zinc Phthalocyanine. Energies, 13 (4). ISSN 1996-1073, DOI https://doi.org/10.3390/en13040962.
Wang, Chin-Tsan and Chen, Yan-Ming and Tang, Raymond Chong Ong and Garg, Akhil and Ong, Hwai-Chyuan and Yang, Yung-Chin (2020) Dominated flow parameters applied in a recirculation microbial fuel cell. PROCESS BIOCHEMISTRY, 99. pp. 236-245. ISSN 13595113, DOI https://doi.org/10.1016/j.procbio.2020.09.014.
Wang, Chin-Tsan and Wu, Jung-Chen and Garg, Akhil and Chong, Wen Tong and Ong, Hwai Chyuan and Wu, Bing-Xue and Jang, Jer-Huan (2020) Effective convergent-type flow slab in proton exchange membrane fuel cells. Journal of the Chinese Society of Mechanical Engineers, 41 (1). pp. 85-90. ISSN 0257-9731,
Yaradoddi, Jayachandra S. and Banapurmath, Nagaraj R. and Ganachari, Sharanabasava V. and Soudagar, Manzoore Elahi M. and Mubarak, N. M. and Hallad, Shankar and Hugar, Shoba and Fayaz, H. (2020) Biodegradable carboxymethyl cellulose based material for sustainable packaging application. Scientific Reports, 10 (1). ISSN 2045-2322, DOI https://doi.org/10.1038/s41598-020-78912-z.
Yaw, Chong Tak and Yap, Keem Siah and Wong, Shen Yuong and Yap, Hwa Jen and Paw, Johnny Koh Siew (2020) Enhancement of neural network based multi agent system for classification and regression in energy system. IEEE Access, 8. pp. 163026-163043. ISSN 2169-3536, DOI https://doi.org/10.1109/ACCESS.2020.3012983.
Zakaria, Aqmar and Abd Shukor, Mohd Hamdi and Todoh, Masahiro and Jusoff, Kamaruzaman (2020) Bio-Functional Coating on Ti6Al4V Surface Produced by Using Plasma Electrolytic Oxidation. Metals, 10 (9). ISSN 2075-4701, DOI https://doi.org/10.3390/met10091124.
Ibrahim, Suriani and Zakaria, Nurul Zariyah Jakaria and Rozali, Shaifulazuar and Nik Ghazali, Nik Nazri and Ab Karim, Mohd Sayuti and Sabri, Mohd Faizul Mohd (2020) Biosynthesis of copper oxide nanoparticles using Camellia sinensis plant powder. In: 4th International Conference on Mechanical, Manufacturing and Plant Engineering (ICMMPE), 14-15 November 2018, Melaka.
Kang, Hooi-Siang and Choo, Hau-Wei and Khor, Wei-Han and Lee, Kee-Quen and Tey, Wah Yen and Lee, Kiat Moon and Liu, Yu-Jie and Chong, Wen Tong (2020) Dynamic behaviours of damaged stability for floating energy storage unit after accidental collision. In: International Conference on Sustainable Energy and Green Technology (SEGT), 11-14 December 2019, Bangkok, Thailand.
Krishna, Yathin and Saidur, R. and Aslfattahi, Navid and Faizal, M. and Ng, K. C. (2020) Enhancing the thermal properties of organic phase change material (palmitic acid) by doping MXene nanoflakes. In: 13th International Engineering Research Conference (EURECA), 27 November 2019, Taylors Univ Lakeside Campus, Subang Jaya, Malaysia.
Saedon, J. B. and Azlan, Mujahidah Zaira and Adenan, Mohd Shahriman and Mamat, Azuddin (2020) CAE analysis for disposable mouth mirror based on autodesk moldflow plastic insight. In: 6th International Conference on Advances in Mechanical Engineering 2019 (ICAME 2019), 14 - 16 August 2019, Kota Kinabalu, Sabah, Malaysia.
Sulaiman, Muhammad Rafi and Yusof, Farazila and Jamaludin, Mohd Fadzil (2020) Effect of support structure design on the part built using selective laser melting. In: Advances in Material Sciences and Engineering, 14-15 November 2018, Melaka, Malaysia.
Wagiman, A. and Mustapa, Mohd Sukri and Shamsudin, S. and Lajis, Mohd Amri and Asmawi, R. and Harimon, M. A. and Yusof, Farazila and Rady, Mohammed H. (2020) Effect of chip treatment on chip-based billet densification in solid-state recycling of new aluminium scrap. In: 4th International Conference on Mechanical, Manufacturing and Plant Engineering (ICMMPE), 14-15 November 2018, Melaka, Malaysia.
Wang, X. H. and Wong, K. H. and Chong, Wen Tong and Ng, J. H. and Xiang, X. B. and Wang, C. T. (2020) Experimental investigation of a diffuser-integrated vertical axis wind turbine. In: International Conference on Sustainable Energy and Green Technology 2019, 11-14 December 2019, Bangkok, Thailand.
