 | Up a level |
Baqer, Y. M. and Ramesh, S. and Yusof, F. and Mahmoodian, R. and Sivakumar, S. and Wu, Tao and Tan, Caiwang (2021) Fiber laser welding of similar and dissimilar aluminum alloys. Journal of Engineering Science and Technology, 16 (4). pp. 2950-2959. ISSN 1823-4690,
Mohd Zahri, N. A. and Sahira Shafee, N. E. and Yusof, F. and Nurmaya Musa, S. and Liana Sukiman, N. and Haseeb, A. S. M. A. and Miyashita, Y. and Ariga, T. (2021) Interfacial microstructure and strength of brazed copper/porous copper foam towards the effect of porous copper foam pore density and brazing holding timeEinfluss von Porendichte des Kupferschaums und Lothaltezeit auf das Grenzflachengefuge und die Festigkeit von Kupfer-Kupferschaum-Lotverbindungen. Materialwissenschaft und Werkstofftechnik, 52 (6). pp. 655-663. ISSN 0933-5137, DOI https://doi.org/10.1002/mawe.202000059.
Quazi, M.M. and Fazal, M.A. and Haseeb, A.S. Md. Abdul and Yusof, F. and Masjuki, Haji Hassan and Arslan, A. (2017) Laser Composite Surfacing of Ni-WC Coating on AA5083 for Enhancing Tribomechanical Properties. Tribology Transactions, 60 (2). pp. 249-259. ISSN 1040-2004, DOI https://doi.org/10.1080/10402004.2016.1158891.
Yusof, F. and Muhamad, M.R. and Moshwan, R. and Jamaludin, M.F. and Miyashita, Y. (2016) Effect of Surface States on Joining Mechanisms and Mechanical Properties of Aluminum Alloy (A5052) and Polyethylene Terephthalate (PET) by Dissimilar Friction Spot Welding. Metals, 6 (5). p. 101. ISSN 2075-4701, DOI https://doi.org/10.3390/met6050101.
Quazi, M.M. and Fazal, M.A. and Haseeb, A.S. Md. Abdul and Yusof, F. and Masjuki, Haji Hassan and Arslan, A. (2016) Effect of rare earth elements and their oxides on tribo-mechanical performance of laser claddings: A review. Journal of Rare Earths, 34 (6). pp. 549-564. ISSN 1002-0721, DOI https://doi.org/10.1016/S1002-0721(16)60061-3.
Tan, A.T. and Tan, A.W. and Yusof, F. (2016) Influence of high-power-low-frequency ultrasonic vibration time on the microstructure and mechanical properties of lead-free solder joints. Journal of Materials Processing Technology, 238. pp. 8-14. ISSN 0924-0136, DOI https://doi.org/10.1016/j.jmatprotec.2016.06.036.
Quazi, M.M. and Fazal, M.A. and Haseeb, A.S. Md. Abdul and Yusof, F. and Masjuki, Haji Hassan and Arslan, A. (2016) Laser-based Surface Modifications of Aluminum and its Alloys. Critical Reviews in Solid State and Materials Sciences, 41 (2). pp. 106-131. ISSN 1040-8436, DOI https://doi.org/10.1080/10408436.2015.1076716.
Bahador, A. and Saud, S.N. and Hamzah, E. and Abubakar, T. and Yusof, F. and Ibrahim, M.K. (2016) Nd:YAG laser welding of Ti-27 at.% Nb shape memory alloys. Welding in the World, 60 (6). pp. 1133-1139. ISSN 0043-2288, DOI https://doi.org/10.1007/s40194-016-0375-z.
Abdolvand, H. and Sohrabi, H. and Faraji, G. and Yusof, F. (2015) A novel combined severe plastic deformation method for producing thin-walled ultrafine grained cylindrical tubes. Materials Letters, 143. pp. 167-171. ISSN 0167-577X, DOI https://doi.org/10.1016/j.matlet.2014.12.107.
Moshwan, R. and Rahmat, S.M. and Yusof, F. and Hassan, M.A. and Hamdi, M. and Fadzil, M. (2015) Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy. International Journal of Materials Research, 106 (3). pp. 258-266. ISSN 1862-5282, DOI https://doi.org/10.3139/146.111172.
Moshwan, R. and Yusof, F. and Hassan, M.A. and Rahmat, S.M. (2015) Effect of tool rotational speed on force generation, microstructure and mechanical properties of friction stir welded Al-Mg-Cr-Mn (AA 5052-O) alloy. Materials & Design, 66 (Pt.A). pp. 118-128. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2014.10.043.
Lutfi, M. and Rahbari, R.G. and Hamdi, M. and Fadzil, M. and Yusof, F. (2014) Characteristics of hybrid microwave sintering of Zn-Al-Cu-Mg alloy. Materials Research Innovations, 18 (S6). pp. 78-83.
Zaharinie, T. and Yusof, F. and Fadzil, M. and Hamdi, M. and Ariga, T. (2014) Microstructural analysis of brazing sapphire and inconel 600 for sensor applications. Materials Research Innovations, 18 (S6). pp. 68-72.
Rahmat, S.M. and Hamdi, M. and Yusof, F. and Moshwan, R. (2014) Preliminary study on the feasibility of friction stir welding in 7075 aluminium alloy and polycarbonate sheet. Materials Research Innovations, 18 (S6). pp. 515-519.
Cheah, G.P. and Tan, C.Y. and Yusof, F. and Muchtar, A. and Lim, K.F. and Yap, B.K. (2014) The effects of sintering behavior of zirconia-doped hydroxyapatite for clinical applications. Materials Research Innovations, 18 (S6). pp. 151-154.
Hassan, M.A. and Abouel-Kasem, A. and El-Sharief, M.A. and Yusof, F. (2012) Evaluation of the material constants of Nitrile Butadiene Rubbers (NBR) with different Carbon Black loading (CB): FE-simulation and experimental. Polymer. ISSN 0032-3861,
