 | Up a level |
Chew, W.J. and Ramesh, S. and Wong, Y.H. and Misran, H. and Yusuf, F. and Tan, C.Y. and Amiriyan, M. and Tolouei, R. and Teng, W.D. (2014) Sintering properties of zirconia-based ceramic composite. Materials Research Innovations, 18 (S6). S6-105-S6-108. ISSN 1432-8917, DOI https://doi.org/10.1179/1432891714Z.000000000939.
Norakmal, A. and Ramesh, S. and Tan, C.Y. and Muchtar, A. and Yap, B.K. and Tolouei, R. (2014) Sintering studies of synthesised manganese-oxide-doped calcium phosphate via wet chemical precipitation method. Materials Research Innovations, 18 (S6). pp. 147-150.
Niakan, A. and Ramesh, Singh and Abd Shukor, Mohd Hamdi and Jahanshahi, A. and Tan, C.Y. and Ching, Yern Chee and Tolouei, R. (2014) Thermal treatment and properties of bovine hydroxyapatite. Materials Research Innovations, 18 (S6). pp. 117-120. ISSN 1432-8917, DOI https://doi.org/10.1179/1432891714Z.000000000941.
Ramesh, Singh and Purbolaksono, J. and Hamdi, M. and Sopyan, I. and Tolouei, R. and Amiriyan, M. and Tarlochan, F. and Teng, W.D. (2012) Low-temperature degradation (LTD) behaviour of CuO-Doped tetragonal zirconia ceramic. Ceramics-Silikáty, 56 (1). pp. 15-19. ISSN 0862-5468,
Tolouei, R. and Singh, R. and Tan, C.Y. and Satgunam, M. and Amiriyan, M. (2012) Manufacturing of high toughness hydroxyapatite produced by wet chemical method. Applied Mechanics and Materials, 110-11. pp. 1289-1295. ISSN 3037852623,
Amiriyan, M. and Chew, W.J. and Ramesh, S. and Tolouei, R. and Hassan, M.A. and Hossain, A. and Sopyan, I. and Meenaloshini, S. (2012) Mechanical and electrical properties of Y-TZP/ZrB2 composite. Advanced Materials Research, 576. pp. 228-231.
Ramesh, Singh and Tan, C.Y. and Tolouei, R. and Amiriyan, M. and Purbolaksono, J. and Sopyan, I. and Teng, W.D. (2012) Sintering behavior of hydroxyapatite prepared from different routes. Materials & Design, 34. pp. 148-154. ISSN 0261-3069, DOI https://doi.org/10.1016/j.matdes.2011.08.011.
Ramesh, S. and Aw, K.L. and Tolouei, R. and Amiriyan, M. and Tan, C.Y. and Hamdi, M. and Purbolaksonoa, J. and Hassan, Mohamed Mohsen Abdel-Naeim and Teng, W.D. (2012) Sintering properties of hydroxyapatite powders prepared using different methods. Ceramics International. ISSN 0272-8842,
Ramesh, Singh and Amiriyan, M. and Meenaloshini, S. and Tolouei, R. and Hamdi, M. and Pruboloksono, J. and Teng, W.D. (2011) Densification behaviour and properties of manganese oxide doped Y-TZP ceramics. Ceramics International, 37 (8). pp. 3583-3590. ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2011.06.014.
Tolouei, R. and Singh, R. and Tan, C.Y. and Amiriyan, M. and Teng, W.D. (2011) Effect of grain size on vickers microhardness and fracture toughness in calcium phosphate bioceramics. Applied Mechanics and Materials, 83. pp. 237-243.
Ramesh, Singh and Tolouei, R. and Hamdi, M. and Purbolaksono, J. and Tan, C.Y. and Amiriyan, M. and Teng, W.D. (2011) Sintering behavior of nanocrystalline hydroxyapatite produced by wet chemical method. Current Nanoscience, 7 (6). pp. 845-849. ISSN 1573-4137, DOI https://doi.org/10.2174/157341311798220538.
Tolouei, R. and Ramesh, S. and Tan, C.Y. and Amiriyan, M. and Teng, W.D. (2011) Sintering effects on the densification of nanocrystalline hydroxyapatite. Science. ISSN 1095-9203,
Amiriyan, M. and Satgunam, M. and Sivakumar, S. and Singh, R. and Tolouei, R. (2012) Sinterability and mechanical properties of MnO2-doped Y-TZP: the effects of holding time variations. Applied Mechanics and Materials, 110-11 . 2nd International Conference on Mechnaical and Aerospace Engineering (ICMAE 2011), pp. 1284-1288.
Tolouei, R. and Singh, R. and Sopyan, I. and Yong, T.C. and Amiriyan, M. and Dung, T.W. (2011) Dependence of the fracture toughness on the sintering time of dense hydroxyapatite bioceramics. Materials Science Forum, 694 . International Conference on Frontier of Nanoscience and Technology (ICFNST 2011), pp. 391-395.
Amiriyan, M. and Singh, R. and Sopyan, I. and Satgunam, M. and Tolouei, R. and Dung, T.W. (2011) Pressureless sintering of electro-conductive zirconia composites. Materials Science Forum, 694 . Engineering, pp. 304-308.
